[ViewVC] Annotation of: cvs/AnyEvent-Fork-Remote/README

NAME
    AnyEvent::Fork::Remote - remote processes with AnyEvent::Fork interface

    THE API IS NOT FINISHED, CONSIDER THIS A BETA RELEASE

SYNOPSIS
       use AnyEvent;
       use AnyEvent::Fork::Remote;

       my $rpc = AnyEvent::Fork::Remote
          ->new_execp ("ssh", "ssh", "othermachine", "perl")
          ->require ("MyModule")
          ->run ("MyModule::run", my $cv = AE::cv);

       my $fh = $cv->recv;

DESCRIPTION
    Despite what the name of this module might suggest, it doesn't actually
    create remote processes for you. But it does make it easy to use them,
    once you have started them.

    This module implements a very similar API as AnyEvent::Fork. In fact,
    similar enough to require at most minor modifications to support both at
    the same time. For example, it works with AnyEvent::Fork::RPC and
    AnyEvent::Fork::Pool.

    The documentation for this module will therefore only document the parts
    of the API that differ between the two modules.

  SUMMARY OF DIFFERENCES
    Here is a short summary of the main differences between AnyEvent::Fork
    and this module:

    *   "send_fh" is not implemented and will fail

    *   the child-side "run" function must read from STDIN and write to
        STDOUT

    *   "fork" does not actually fork, but will create a new process

EXAMPLE
    This example uses a local perl (because that is likely going to work
    without further setup) and the AnyEvent::Fork::RPC to create simple
    worker process.

    First load the modules we are going to use:

       use AnyEvent;
       use AnyEvent::Fork::Remote;
       use AnyEvent::Fork::RPC;

    Then create, configure and run the process:

       my $rpc = AnyEvent::Fork::Remote
          ->new_execp ("perl", "perl")
          ->eval ('
               sub myrun {
                  "this is process $$, and you passed <@_>"
               }
            ')
          ->AnyEvent::Fork::RPC::run ("myrun");

    We use "new_execp" to execute the first perl found in the PATH. You'll
    have to make sure there is one for this to work. The perl does not
    actually have to be the same perl as the one running the example, and it
    doesn't need to have any modules installed.

    The reason we have to specif< "perl" twice is that the first argument to
    "new_execp" (and also "new_exec") is the program name or path, while the
    remaining ones are the arguments, and the first argument passed to a
    program is the program name, so it has to be specified twice.

    Finally, the standard example, send some numbers to the remote function,
    and print whatever it returns:

       my $cv = AE::cv;

       for (1..10) {
          $cv->begin;
          $rpc->($_, sub {
             print "remote function returned: $_[0]\n";
             $cv->end;
          });
       }

       $cv->recv;

    Now, executing perl in the PATH isn't very interesting - you could have
    done the same with AnyEvent::Fork, and it might even be more efficient.

    The power of this module is that the perl doesn't need to run on the
    local box, you could simply substitute another command, such as ssh
    remotebox perl:

       my $rpc = AnyEvent::Fork::Remote
          ->new_execp ("ssh", "ssh", "remotebox", "perl")

    And if you want to use a specific path for ssh, use "new_exec":

       my $rpc = AnyEvent::Fork::Remote
          ->new_exec ("/usr/bin/ssh", "ssh", "remotebox", "perl")

    Of course, it doesn't really matter to this module how you construct
    your perl processes, what matters is that somehow, you give it a file
    handle connected to the new perls STDIN and STDOUT.

PARENT PROCESS USAGE
    my $proc = new_exec AnyEvent::Fork::Remote $path, @args...
        Creates a new "AnyEvent::Fork::Remote" object. Unlike
        AnyEvent::Fork, processes are only created when "run" is called,
        every other method call is is simply recorded until then.

        Each time a new process is needed, it executes $path with the given
        arguments (the first array member must be the program name, as with
        the "exec" function with explicit PROGRAM argument) and both "STDIN"
        and "STDOUT" connected to a communications socket. No input must be
        consumed by the command before perl is started, and no output should
        be generated.

        The program *must* invoke perl somehow, with STDIN and STDOUT
        intact, without specifying anything to execute (no script file name,
        no "-e" switch etc.).

        Here are some examples to give you an idea:

           # just "perl"
           $proc = new_exec AnyEvent::Fork::Remote
              "/usr/bin/perl", "perl";

           # rsh othernode exec perl
           $proc = new_exec AnyEvent::Fork::Remote
              "/usr/bin/rsh", "rsh", "othernode", "exec perl";

           # a complicated ssh command
           $proc = new_exec AnyEvent::Fork::Remote
              "/usr/bin/ssh",
              qw(ssh -q
                 -oCheckHostIP=no -oTCPKeepAlive=yes -oStrictHostKeyChecking=no
                 -oGlobalKnownHostsFile=/dev/null -oUserKnownHostsFile=/dev/null
                 otherhost
                 exec perl);

    my $proc = new_execp AnyEvent::Fork::Remote $file, @args...
        Just like "new_exec", except that the program is searched in the
        $ENV{PATH} first, similarly to how the shell does it. This makes it
        easier to find e.g. "ssh":

           $proc = new_execp AnyEvent::Fork::Remote "ssh", "ssh", "otherhost", "perl";

    my $proc = new AnyEvent::Fork::Remote $create_callback
        Basically the same as "new_exec", but instead of a command to
        execute, it expects a callback which is invoked each time a process
        needs to be created.

        The $create_callback is called with another callback as argument,
        and should call this callback with the file handle that is connected
        to a perl process. This callback can be invoked even after the
        $create_callback returns.

        Example: emulate "new_exec" using "new".

           use AnyEvent::Util;
           use Proc::FastSpawn;

           $proc = new AnyEvent::Fork::Remote sub {
              my $done = shift;

              my ($a, $b) = AnyEvent::Util::portable_socketpair
                 or die;

              open my $oldin , "<&0" or die;
              open my $oldout, ">&1" or die;

              open STDIN , "<&" . fileno $b or die;
              open STDOUT, ">&" . fileno $b or die;

              spawn "/usr/bin/rsh", ["rsh", "othernode", "perl"];

              open STDIN , "<&" . fileno $oldin ;
              open STDOUT, ">&" . fileno $oldout;

              $done->($a);
           };

    my $proc = new_from_fh $fh
        Creates an "AnyEvent::Fork::Remote" object from a file handle. This
        file handle must be connected to both STDIN and STDOUT of a perl
        process.

        This form might be more convenient than "new" or "new_exec" when
        creating an "AnyEvent::Fork::Remote" object, but the resulting
        object does not support "fork".

    $new_proc = $proc->fork
        Quite the same as the same method of AnyEvent::Fork, except that it
        simply clones the object without creating an actual process.

    undef = $proc->pid
        The "pid" method always returns "undef" and only exists for
        compatibility with AnyEvent::Fork.

    $proc = $proc->send_fh (...)
        Not supported and always croaks.

    $proc = $proc->eval ($perlcode, @args)
        Quite the same as the same method of AnyEvent::Fork.

    $proc = $proc->require ($module, ...)
        Quite the same as the same method of AnyEvent::Fork.

    $proc = $proc->send_arg ($string, ...)
        Quite the same as the same method of AnyEvent::Fork.

    $proc->run ($func, $cb->($fh))
        Very similar to the run method of AnyEvent::Fork.

        On the parent side, the API is identical, except that a $cb argument
        of "undef" instead of a valid file handle signals an error.

        On the child side, the "communications socket" is in fact just
        *STDIN, and typically can only be read from (this highly depends on
        how the program is created - if you just run perl locally, it will
        work for both reading and writing, but commands such as rsh or ssh
        typically only provide read-only handles for STDIN).

        To be portable, if the run function wants to read data that is
        written to $fh in the parent, then it should read from STDIN. If the
        run function wants to provide data that can later be read from $fh,
        then it should write them to STDOUT.

        You can write a run function that works with both AnyEvent::Fork and
        this module by checking "fileno $fh". If it is 0 (meaning it is
        STDIN), then you should use it for reading, and STDOUT for writing.
        Otherwise, you should use the file handle for both:

           sub run {
              my ($rfh, ...) = @_;
              my $wfh = fileno $rfh ? $rfh : *STDOUT;

              # now use $rfh for reading and $wfh for writing
           }

SEE ALSO
    AnyEvent::Fork, the same as this module, for local processes.

    AnyEvent::Fork::RPC, to talk to the created processes.

    AnyEvent::Fork::Pool, to manage whole pools of processes.

AUTHOR AND CONTACT INFORMATION
     Marc Lehmann <schmorp@schmorp.de>
     http://software.schmorp.de/pkg/AnyEvent-Fork-Remote

Revision:	1.2
Committed:	Sun Apr 28 15:36:30 2013 UTC (11 years, 1 month ago) by root
Branch:	MAIN
CVS Tags:	rel-1_0, rel-0_2, HEAD
Changes since 1.1:	+253 -0 lines
Log Message:	0.2
#	User	Rev	Content
1	root	1.2	NAME
2			AnyEvent::Fork::Remote - remote processes with AnyEvent::Fork interface
3
4			THE API IS NOT FINISHED, CONSIDER THIS A BETA RELEASE
5
6			SYNOPSIS
7			use AnyEvent;
8			use AnyEvent::Fork::Remote;
9
10			my $rpc = AnyEvent::Fork::Remote
11			->new_execp ("ssh", "ssh", "othermachine", "perl")
12			->require ("MyModule")
13			->run ("MyModule::run", my $cv = AE::cv);
14
15			my $fh = $cv->recv;
16
17			DESCRIPTION
18			Despite what the name of this module might suggest, it doesn't actually
19			create remote processes for you. But it does make it easy to use them,
20			once you have started them.
21
22			This module implements a very similar API as AnyEvent::Fork. In fact,
23			similar enough to require at most minor modifications to support both at
24			the same time. For example, it works with AnyEvent::Fork::RPC and
25			AnyEvent::Fork::Pool.
26
27			The documentation for this module will therefore only document the parts
28			of the API that differ between the two modules.
29
30			SUMMARY OF DIFFERENCES
31			Here is a short summary of the main differences between AnyEvent::Fork
32			and this module:
33
34			* "send_fh" is not implemented and will fail
35
36			* the child-side "run" function must read from STDIN and write to
37			STDOUT
38
39			* "fork" does not actually fork, but will create a new process
40
41			EXAMPLE
42			This example uses a local perl (because that is likely going to work
43			without further setup) and the AnyEvent::Fork::RPC to create simple
44			worker process.
45
46			First load the modules we are going to use:
47
48			use AnyEvent;
49			use AnyEvent::Fork::Remote;
50			use AnyEvent::Fork::RPC;
51
52			Then create, configure and run the process:
53
54			my $rpc = AnyEvent::Fork::Remote
55			->new_execp ("perl", "perl")
56			->eval ('
57			sub myrun {
58			"this is process $$, and you passed <@_>"
59			}
60			')
61			->AnyEvent::Fork::RPC::run ("myrun");
62
63			We use "new_execp" to execute the first perl found in the PATH. You'll
64			have to make sure there is one for this to work. The perl does not
65			actually have to be the same perl as the one running the example, and it
66			doesn't need to have any modules installed.
67
68			The reason we have to specif< "perl" twice is that the first argument to
69			"new_execp" (and also "new_exec") is the program name or path, while the
70			remaining ones are the arguments, and the first argument passed to a
71			program is the program name, so it has to be specified twice.
72
73			Finally, the standard example, send some numbers to the remote function,
74			and print whatever it returns:
75
76			my $cv = AE::cv;
77
78			for (1..10) {
79			$cv->begin;
80			$rpc->($_, sub {
81			print "remote function returned: $_[0]\n";
82			$cv->end;
83			});
84			}
85
86			$cv->recv;
87
88			Now, executing perl in the PATH isn't very interesting - you could have
89			done the same with AnyEvent::Fork, and it might even be more efficient.
90
91			The power of this module is that the perl doesn't need to run on the
92			local box, you could simply substitute another command, such as ssh
93			remotebox perl:
94
95			my $rpc = AnyEvent::Fork::Remote
96			->new_execp ("ssh", "ssh", "remotebox", "perl")
97
98			And if you want to use a specific path for ssh, use "new_exec":
99
100			my $rpc = AnyEvent::Fork::Remote
101			->new_exec ("/usr/bin/ssh", "ssh", "remotebox", "perl")
102
103			Of course, it doesn't really matter to this module how you construct
104			your perl processes, what matters is that somehow, you give it a file
105			handle connected to the new perls STDIN and STDOUT.
106
107			PARENT PROCESS USAGE
108			my $proc = new_exec AnyEvent::Fork::Remote $path, @args...
109			Creates a new "AnyEvent::Fork::Remote" object. Unlike
110			AnyEvent::Fork, processes are only created when "run" is called,
111			every other method call is is simply recorded until then.
112
113			Each time a new process is needed, it executes $path with the given
114			arguments (the first array member must be the program name, as with
115			the "exec" function with explicit PROGRAM argument) and both "STDIN"
116			and "STDOUT" connected to a communications socket. No input must be
117			consumed by the command before perl is started, and no output should
118			be generated.
119
120			The program must invoke perl somehow, with STDIN and STDOUT
121			intact, without specifying anything to execute (no script file name,
122			no "-e" switch etc.).
123
124			Here are some examples to give you an idea:
125
126			# just "perl"
127			$proc = new_exec AnyEvent::Fork::Remote
128			"/usr/bin/perl", "perl";
129
130			# rsh othernode exec perl
131			$proc = new_exec AnyEvent::Fork::Remote
132			"/usr/bin/rsh", "rsh", "othernode", "exec perl";
133
134			# a complicated ssh command
135			$proc = new_exec AnyEvent::Fork::Remote
136			"/usr/bin/ssh",
137			qw(ssh -q
138			-oCheckHostIP=no -oTCPKeepAlive=yes -oStrictHostKeyChecking=no
139			-oGlobalKnownHostsFile=/dev/null -oUserKnownHostsFile=/dev/null
140			otherhost
141			exec perl);
142
143			my $proc = new_execp AnyEvent::Fork::Remote $file, @args...
144			Just like "new_exec", except that the program is searched in the
145			$ENV{PATH} first, similarly to how the shell does it. This makes it
146			easier to find e.g. "ssh":
147
148			$proc = new_execp AnyEvent::Fork::Remote "ssh", "ssh", "otherhost", "perl";
149
150			my $proc = new AnyEvent::Fork::Remote $create_callback
151			Basically the same as "new_exec", but instead of a command to
152			execute, it expects a callback which is invoked each time a process
153			needs to be created.
154
155			The $create_callback is called with another callback as argument,
156			and should call this callback with the file handle that is connected
157			to a perl process. This callback can be invoked even after the
158			$create_callback returns.
159
160			Example: emulate "new_exec" using "new".
161
162			use AnyEvent::Util;
163			use Proc::FastSpawn;
164
165			$proc = new AnyEvent::Fork::Remote sub {
166			my $done = shift;
167
168			my ($a, $b) = AnyEvent::Util::portable_socketpair
169			or die;
170
171			open my $oldin , "<&0" or die;
172			open my $oldout, ">&1" or die;
173
174			open STDIN , "<&" . fileno $b or die;
175			open STDOUT, ">&" . fileno $b or die;
176
177			spawn "/usr/bin/rsh", ["rsh", "othernode", "perl"];
178
179			open STDIN , "<&" . fileno $oldin ;
180			open STDOUT, ">&" . fileno $oldout;
181
182			$done->($a);
183			};
184
185			my $proc = new_from_fh $fh
186			Creates an "AnyEvent::Fork::Remote" object from a file handle. This
187			file handle must be connected to both STDIN and STDOUT of a perl
188			process.
189
190			This form might be more convenient than "new" or "new_exec" when
191			creating an "AnyEvent::Fork::Remote" object, but the resulting
192			object does not support "fork".
193
194			$new_proc = $proc->fork
195			Quite the same as the same method of AnyEvent::Fork, except that it
196			simply clones the object without creating an actual process.
197
198			undef = $proc->pid
199			The "pid" method always returns "undef" and only exists for
200			compatibility with AnyEvent::Fork.
201
202			$proc = $proc->send_fh (...)
203			Not supported and always croaks.
204
205			$proc = $proc->eval ($perlcode, @args)
206			Quite the same as the same method of AnyEvent::Fork.
207
208			$proc = $proc->require ($module, ...)
209			Quite the same as the same method of AnyEvent::Fork.
210
211			$proc = $proc->send_arg ($string, ...)
212			Quite the same as the same method of AnyEvent::Fork.
213
214			$proc->run ($func, $cb->($fh))
215			Very similar to the run method of AnyEvent::Fork.
216
217			On the parent side, the API is identical, except that a $cb argument
218			of "undef" instead of a valid file handle signals an error.
219
220			On the child side, the "communications socket" is in fact just
221			*STDIN, and typically can only be read from (this highly depends on
222			how the program is created - if you just run perl locally, it will
223			work for both reading and writing, but commands such as rsh or ssh
224			typically only provide read-only handles for STDIN).
225
226			To be portable, if the run function wants to read data that is
227			written to $fh in the parent, then it should read from STDIN. If the
228			run function wants to provide data that can later be read from $fh,
229			then it should write them to STDOUT.
230
231			You can write a run function that works with both AnyEvent::Fork and
232			this module by checking "fileno $fh". If it is 0 (meaning it is
233			STDIN), then you should use it for reading, and STDOUT for writing.
234			Otherwise, you should use the file handle for both:
235
236			sub run {
237			my ($rfh, ...) = @_;
238			my $wfh = fileno $rfh ? $rfh : *STDOUT;
239
240			# now use $rfh for reading and $wfh for writing
241			}
242
243			SEE ALSO
244			AnyEvent::Fork, the same as this module, for local processes.
245
246			AnyEvent::Fork::RPC, to talk to the created processes.
247
248			AnyEvent::Fork::Pool, to manage whole pools of processes.
249
250			AUTHOR AND CONTACT INFORMATION
251			Marc Lehmann <schmorp@schmorp.de>
252			http://software.schmorp.de/pkg/AnyEvent-Fork-Remote
253