ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent-MP/MP.pm

Comparing AnyEvent-MP/MP.pm (file contents):
Revision 1.49 by root, Thu Aug 13 15:29:58 2009 UTC vs.
Revision 1.153 by root, Sat Nov 2 01:30:49 2019 UTC

1	=head1 NAME	1	=head1 NAME
2		2
3	AnyEvent::MP - multi-processing/message-passing framework	3	AnyEvent::MP - erlang-style multi-processing/message-passing framework
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	use AnyEvent::MP;	7	use AnyEvent::MP;
8		8
9	$NODE # contains this node's noderef	9	$NODE # contains this node's node ID
10	NODE # returns this node's noderef	10	NODE # returns this node's node ID
11	NODE $port # returns the noderef of the port
12		11
13	$SELF # receiving/own port id in rcv callbacks	12	$SELF # receiving/own port id in rcv callbacks
14		13
15	# initialise the node so it can send/receive messages	14	# initialise the node so it can send/receive messages
16	initialise_node; # -OR-	15	configure;
17	initialise_node "localhost:4040"; # -OR-
18	initialise_node "slave/", "localhost:4040"
19		16
20	# ports are message endpoints	17	# ports are message destinations
21		18
22	# sending messages	19	# sending messages
23	snd $port, type => data...;	20	snd $port, type => data...;
24	snd $port, @msg;	21	snd $port, @msg;
25	snd @msg_with_first_element_being_a_port;	22	snd @msg_with_first_element_being_a_port;
26		23
27	# creating/using miniports	24	# creating/using ports, the simple way
28	my $miniport = port { my @msg = @_; 0 };	25	my $simple_port = port { my @msg = @_ };
29		26
30	# creating/using full ports	27	# creating/using ports, tagged message matching
31	my $port = port;	28	my $port = port;
32	rcv $port, smartmatch => $cb->(@msg);
33	rcv $port, ping => sub { snd $_[0], "pong"; 0 };	29	rcv $port, ping => sub { snd $_[0], "pong" };
34	rcv $port, pong => sub { warn "pong received\n"; 0 };	30	rcv $port, pong => sub { warn "pong received\n" };
35
36	# more, smarter, matches (_any_ is exported by this module)
37	rcv $port, [child_died => $pid] => sub { ...
38	rcv $port, [_any_, _any_, 3] => sub { .. $_[2] is 3
39		31
40	# create a port on another node	32	# create a port on another node
41	my $port = spawn $node, $initfunc, @initdata;	33	my $port = spawn $node, $initfunc, @initdata;
42		34
		35	# destroy a port again
		36	kil $port; # "normal" kill
		37	kil $port, my_error => "everything is broken"; # error kill
		38
43	# monitoring	39	# monitoring
44	mon $port, $cb->(@msg) # callback is invoked on death	40	mon $port, $cb->(@msg) # callback is invoked on death
45	mon $port, $otherport # kill otherport on abnormal death	41	mon $port, $localport # kill localport on abnormal death
46	mon $port, $otherport, @msg # send message on death	42	mon $port, $localport, @msg # send message on death
47		43
48	=head1 CURRENT STATUS	44	# temporarily execute code in port context
		45	peval $port, sub { die "kill the port!" };
49		46
50	AnyEvent::MP - stable API, should work	47	# execute callbacks in $SELF port context
51	AnyEvent::MP::Intro - outdated	48	my $timer = AE::timer 1, 0, psub {
52	AnyEvent::MP::Kernel - WIP	49	die "kill the port, delayed";
53	AnyEvent::MP::Transport - mostly stable	50	};
54		51
55	stay tuned.	52	# distributed database - modification
		53	db_set $family => $subkey [=> $value] # add a subkey
		54	db_del $family => $subkey... # delete one or more subkeys
		55	db_reg $family => $port [=> $value] # register a port
		56
		57	# distributed database - queries
		58	db_family $family => $cb->(\%familyhash)
		59	db_keys $family => $cb->(\@keys)
		60	db_values $family => $cb->(\@values)
		61
		62	# distributed database - monitoring a family
		63	db_mon $family => $cb->(\%familyhash, \@added, \@changed, \@deleted)
56		64
57	=head1 DESCRIPTION	65	=head1 DESCRIPTION
58		66
59	This module (-family) implements a simple message passing framework.	67	This module (-family) implements a simple message passing framework.
60		68
61	Despite its simplicity, you can securely message other processes running	69	Despite its simplicity, you can securely message other processes running
62	on the same or other hosts.	70	on the same or other hosts, and you can supervise entities remotely.
63		71
64	For an introduction to this module family, see the L<AnyEvent::MP::Intro>	72	For an introduction to this module family, see the L<AnyEvent::MP::Intro>
65	manual page.	73	manual page and the examples under F<eg/>.
66
67	At the moment, this module family is severly broken and underdocumented,
68	so do not use. This was uploaded mainly to reserve the CPAN namespace -
69	stay tuned!
70		74
71	=head1 CONCEPTS	75	=head1 CONCEPTS
72		76
73	=over 4	77	=over 4
74		78
75	=item port	79	=item port
76		80
77	A port is something you can send messages to (with the C<snd> function).	81	Not to be confused with a TCP port, a "port" is something you can send
		82	messages to (with the C<snd> function).
78		83
79	Some ports allow you to register C<rcv> handlers that can match specific	84	Ports allow you to register C<rcv> handlers that can match all or just
80	messages. All C<rcv> handlers will receive messages they match, messages	85	some messages. Messages send to ports will not be queued, regardless of
81	will not be queued.	86	anything was listening for them or not.
82		87
		88	Ports are represented by (printable) strings called "port IDs".
		89
83	=item port id - C<noderef#portname>	90	=item port ID - C<nodeid#portname>
84		91
85	A port id is normaly the concatenation of a noderef, a hash-mark (C<#>) as	92	A port ID is the concatenation of a node ID, a hash-mark (C<#>)
86	separator, and a port name (a printable string of unspecified format). An	93	as separator, and a port name (a printable string of unspecified
87	exception is the the node port, whose ID is identical to its node	94	format created by AnyEvent::MP).
88	reference.
89		95
90	=item node	96	=item node
91		97
92	A node is a single process containing at least one port - the node	98	A node is a single process containing at least one port - the node port,
93	port. You can send messages to node ports to find existing ports or to	99	which enables nodes to manage each other remotely, and to create new
94	create new ports, among other things.	100	ports.
95		101
96	Nodes are either private (single-process only), slaves (connected to a	102	Nodes are either public (have one or more listening ports) or private
97	master node only) or public nodes (connectable from unrelated nodes).	103	(no listening ports). Private nodes cannot talk to other private nodes
		104	currently, but all nodes can talk to public nodes.
98		105
99	=item noderef - C<host:port,host:port...>, C<id@noderef>, C<id>	106	Nodes is represented by (printable) strings called "node IDs".
100		107
101	A node reference is a string that either simply identifies the node (for	108	=item node ID - C<[A-Za-z0-9_\-.:]*>
102	private and slave nodes), or contains a recipe on how to reach a given
103	node (for public nodes).
104		109
105	This recipe is simply a comma-separated list of C<address:port> pairs (for	110	A node ID is a string that uniquely identifies the node within a
106	TCP/IP, other protocols might look different).	111	network. Depending on the configuration used, node IDs can look like a
		112	hostname, a hostname and a port, or a random string. AnyEvent::MP itself
		113	doesn't interpret node IDs in any way except to uniquely identify a node.
107		114
108	Node references come in two flavours: resolved (containing only numerical	115	=item binds - C<ip:port>
109	addresses) or unresolved (where hostnames are used instead of addresses).
110		116
111	Before using an unresolved node reference in a message you first have to	117	Nodes can only talk to each other by creating some kind of connection to
112	resolve it.	118	each other. To do this, nodes should listen on one or more local transport
		119	endpoints - binds.
		120
		121	Currently, only standard C<ip:port> specifications can be used, which
		122	specify TCP ports to listen on. So a bind is basically just a tcp socket
		123	in listening mode that accepts connections from other nodes.
		124
		125	=item seed nodes
		126
		127	When a node starts, it knows nothing about the network it is in - it
		128	needs to connect to at least one other node that is already in the
		129	network. These other nodes are called "seed nodes".
		130
		131	Seed nodes themselves are not special - they are seed nodes only because
		132	some other node I<uses> them as such, but any node can be used as seed
		133	node for other nodes, and eahc node can use a different set of seed nodes.
		134
		135	In addition to discovering the network, seed nodes are also used to
		136	maintain the network - all nodes using the same seed node are part of the
		137	same network. If a network is split into multiple subnets because e.g. the
		138	network link between the parts goes down, then using the same seed nodes
		139	for all nodes ensures that eventually the subnets get merged again.
		140
		141	Seed nodes are expected to be long-running, and at least one seed node
		142	should always be available. They should also be relatively responsive - a
		143	seed node that blocks for long periods will slow down everybody else.
		144
		145	For small networks, it's best if every node uses the same set of seed
		146	nodes. For large networks, it can be useful to specify "regional" seed
		147	nodes for most nodes in an area, and use all seed nodes as seed nodes for
		148	each other. What's important is that all seed nodes connections form a
		149	complete graph, so that the network cannot split into separate subnets
		150	forever.
		151
		152	Seed nodes are represented by seed IDs.
		153
		154	=item seed IDs - C<host:port>
		155
		156	Seed IDs are transport endpoint(s) (usually a hostname/IP address and a
		157	TCP port) of nodes that should be used as seed nodes.
		158
		159	=item global nodes
		160
		161	An AEMP network needs a discovery service - nodes need to know how to
		162	connect to other nodes they only know by name. In addition, AEMP offers a
		163	distributed "group database", which maps group names to a list of strings
		164	- for example, to register worker ports.
		165
		166	A network needs at least one global node to work, and allows every node to
		167	be a global node.
		168
		169	Any node that loads the L<AnyEvent::MP::Global> module becomes a global
		170	node and tries to keep connections to all other nodes. So while it can
		171	make sense to make every node "global" in small networks, it usually makes
		172	sense to only make seed nodes into global nodes in large networks (nodes
		173	keep connections to seed nodes and global nodes, so making them the same
		174	reduces overhead).
113		175
114	=back	176	=back
115		177
116	=head1 VARIABLES/FUNCTIONS	178	=head1 VARIABLES/FUNCTIONS
117		179
…		…
119		181
120	=cut	182	=cut
121		183
122	package AnyEvent::MP;	184	package AnyEvent::MP;
123		185
		186	use AnyEvent::MP::Config ();
124	use AnyEvent::MP::Kernel;	187	use AnyEvent::MP::Kernel;
		188	use AnyEvent::MP::Kernel qw(
		189	%NODE %PORT %PORT_DATA $UNIQ $RUNIQ $ID
		190	add_node load_func
		191
		192	NODE $NODE
		193	configure
		194	node_of port_is_local
		195	snd kil
		196	db_set db_del
		197	db_mon db_family db_keys db_values
		198	);
125		199
126	use common::sense;	200	use common::sense;
127		201
128	use Carp ();	202	use Carp ();
129		203
130	use AE ();	204	use AnyEvent ();
		205	use Guard ();
131		206
132	use base "Exporter";	207	use base "Exporter";
133		208
134	our $VERSION = $AnyEvent::MP::Kernel::VERSION;	209	our $VERSION = '2.02'; # also in MP/Config.pm
135		210
136	our @EXPORT = qw(	211	our @EXPORT = qw(
137	NODE $NODE *SELF node_of _any_	212	configure
138	resolve_node initialise_node	213
139	snd rcv mon kil reg psub spawn	214	NODE $NODE
140	port	215	*SELF
		216
		217	node_of port_is_local
		218
		219	snd kil
		220	port rcv mon mon_guard psub peval spawn cal
		221	db_set db_del db_reg
		222	db_mon db_family db_keys db_values
		223
		224	after
141	);	225	);
142		226
143	our $SELF;	227	our $SELF;
144		228
145	sub _self_die() {	229	sub _self_die() {
…		…
148	kil $SELF, die => $msg;	232	kil $SELF, die => $msg;
149	}	233	}
150		234
151	=item $thisnode = NODE / $NODE	235	=item $thisnode = NODE / $NODE
152		236
153	The C<NODE> function returns, and the C<$NODE> variable contains	237	The C<NODE> function returns, and the C<$NODE> variable contains, the node
154	the noderef of the local node. The value is initialised by a call	238	ID of the node running in the current process. This value is initialised by
155	to C<become_public> or C<become_slave>, after which all local port	239	a call to C<configure>.
156	identifiers become invalid.
157		240
158	=item $noderef = node_of $port	241	=item $nodeid = node_of $port
159		242
160	Extracts and returns the noderef from a portid or a noderef.	243	Extracts and returns the node ID from a port ID or a node ID.
161		244
162	=item initialise_node $noderef, $seednode, $seednode...	245	=item $is_local = port_is_local $port
163		246
164	=item initialise_node "slave/", $master, $master...	247	Returns true iff the port is a local port.
165		248
		249	=item configure $profile, key => value...
		250
		251	=item configure key => value...
		252
166	Before a node can talk to other nodes on the network it has to initialise	253	Before a node can talk to other nodes on the network (i.e. enter
167	itself - the minimum a node needs to know is it's own name, and optionally	254	"distributed mode") it has to configure itself - the minimum a node needs
168	it should know the noderefs of some other nodes in the network.	255	to know is its own name, and optionally it should know the addresses of
		256	some other nodes in the network to discover other nodes.
169		257
170	This function initialises a node - it must be called exactly once (or	258	This function configures a node - it must be called exactly once (or
171	never) before calling other AnyEvent::MP functions.	259	never) before calling other AnyEvent::MP functions.
172		260
173	All arguments (optionally except for the first) are noderefs, which can be	261	The key/value pairs are basically the same ones as documented for the
174	either resolved or unresolved.	262	F<aemp> command line utility (sans the set/del prefix), with these additions:
175
176	The first argument will be looked up in the configuration database first
177	(if it is C<undef> then the current nodename will be used instead) to find
178	the relevant configuration profile (see L<aemp>). If none is found then
179	the default configuration is used. The configuration supplies additional
180	seed/master nodes and can override the actual noderef.
181
182	There are two types of networked nodes, public nodes and slave nodes:
183		263
184	=over 4	264	=over 4
185		265
186	=item public nodes	266	=item norc => $boolean (default false)
187		267
188	For public nodes, C<$noderef> (supplied either directly to	268	If true, then the rc file (e.g. F<~/.perl-anyevent-mp>) will I<not>
189	C<initialise_node> or indirectly via a profile or the nodename) must be a	269	be consulted - all configuration options must be specified in the
190	noderef (possibly unresolved, in which case it will be resolved).	270	C<configure> call.
191		271
192	After resolving, the node will bind itself on all endpoints and try to	272	=item force => $boolean (default false)
193	connect to all additional C<$seednodes> that are specified. Seednodes are
194	optional and can be used to quickly bootstrap the node into an existing
195	network.
196		273
197	=item slave nodes	274	IF true, then the values specified in the C<configure> will take
198		275	precedence over any values configured via the rc file. The default is for
199	When the C<$noderef> (either as given or overriden by the config file)	276	the rc file to override any options specified in the program.
200	is the special string C<slave/>, then the node will become a slave
201	node. Slave nodes cannot be contacted from outside and will route most of
202	their traffic to the master node that they attach to.
203
204	At least one additional noderef is required (either by specifying it
205	directly or because it is part of the configuration profile): The node
206	will try to connect to all of them and will become a slave attached to the
207	first node it can successfully connect to.
208		277
209	=back	278	=back
210		279
211	This function will block until all nodes have been resolved and, for slave
212	nodes, until it has successfully established a connection to a master
213	server.
214
215	Example: become a public node listening on the guessed noderef, or the one
216	specified via C<aemp> for the current node. This should be the most common
217	form of invocation for "daemon"-type nodes.
218
219	initialise_node;
220
221	Example: become a slave node to any of the the seednodes specified via
222	C<aemp>. This form is often used for commandline clients.
223
224	initialise_node "slave/";
225
226	Example: become a slave node to any of the specified master servers. This
227	form is also often used for commandline clients.
228
229	initialise_node "slave/", "master1", "192.168.13.17", "mp.example.net";
230
231	Example: become a public node, and try to contact some well-known master
232	servers to become part of the network.
233
234	initialise_node undef, "master1", "master2";
235
236	Example: become a public node listening on port C<4041>.
237
238	initialise_node 4041;
239
240	Example: become a public node, only visible on localhost port 4044.
241
242	initialise_node "localhost:4044";
243
244	=item $cv = resolve_node $noderef
245
246	Takes an unresolved node reference that may contain hostnames and
247	abbreviated IDs, resolves all of them and returns a resolved node
248	reference.
249
250	In addition to C<address:port> pairs allowed in resolved noderefs, the
251	following forms are supported:
252
253	=over 4	280	=over 4
254		281
255	=item the empty string	282	=item step 1, gathering configuration from profiles
256		283
257	An empty-string component gets resolved as if the default port (4040) was	284	The function first looks up a profile in the aemp configuration (see the
258	specified.	285	L<aemp> commandline utility). The profile name can be specified via the
		286	named C<profile> parameter or can simply be the first parameter). If it is
		287	missing, then the nodename (F<uname -n>) will be used as profile name.
259		288
260	=item naked port numbers (e.g. C<1234>)	289	The profile data is then gathered as follows:
261		290
262	These are resolved by prepending the local nodename and a colon, to be	291	First, all remaining key => value pairs (all of which are conveniently
263	further resolved.	292	undocumented at the moment) will be interpreted as configuration
		293	data. Then they will be overwritten by any values specified in the global
		294	default configuration (see the F<aemp> utility), then the chain of
		295	profiles chosen by the profile name (and any C<parent> attributes).
264		296
265	=item hostnames (e.g. C<localhost:1234>, C<localhost>)	297	That means that the values specified in the profile have highest priority
		298	and the values specified directly via C<configure> have lowest priority,
		299	and can only be used to specify defaults.
266		300
267	These are resolved by using AnyEvent::DNS to resolve them, optionally	301	If the profile specifies a node ID, then this will become the node ID of
268	looking up SRV records for the C<aemp=4040> port, if no port was	302	this process. If not, then the profile name will be used as node ID, with
269	specified.	303	a unique randoms tring (C</%u>) appended.
		304
		305	The node ID can contain some C<%> sequences that are expanded: C<%n>
		306	is expanded to the local nodename, C<%u> is replaced by a random
		307	strign to make the node unique. For example, the F<aemp> commandline
		308	utility uses C<aemp/%n/%u> as nodename, which might expand to
		309	C<aemp/cerebro/ZQDGSIkRhEZQDGSIkRhE>.
		310
		311	=item step 2, bind listener sockets
		312
		313	The next step is to look up the binds in the profile, followed by binding
		314	aemp protocol listeners on all binds specified (it is possible and valid
		315	to have no binds, meaning that the node cannot be contacted from the
		316	outside. This means the node cannot talk to other nodes that also have no
		317	binds, but it can still talk to all "normal" nodes).
		318
		319	If the profile does not specify a binds list, then a default of C<*> is
		320	used, meaning the node will bind on a dynamically-assigned port on every
		321	local IP address it finds.
		322
		323	=item step 3, connect to seed nodes
		324
		325	As the last step, the seed ID list from the profile is passed to the
		326	L<AnyEvent::MP::Global> module, which will then use it to keep
		327	connectivity with at least one node at any point in time.
270		328
271	=back	329	=back
		330
		331	Example: become a distributed node using the local node name as profile.
		332	This should be the most common form of invocation for "daemon"-type nodes.
		333
		334	configure
		335
		336	Example: become a semi-anonymous node. This form is often used for
		337	commandline clients.
		338
		339	configure nodeid => "myscript/%n/%u";
		340
		341	Example: configure a node using a profile called seed, which is suitable
		342	for a seed node as it binds on all local addresses on a fixed port (4040,
		343	customary for aemp).
		344
		345	# use the aemp commandline utility
		346	# aemp profile seed binds '*:4040'
		347
		348	# then use it
		349	configure profile => "seed";
		350
		351	# or simply use aemp from the shell again:
		352	# aemp run profile seed
		353
		354	# or provide a nicer-to-remember nodeid
		355	# aemp run profile seed nodeid "$(hostname)"
272		356
273	=item $SELF	357	=item $SELF
274		358
275	Contains the current port id while executing C<rcv> callbacks or C<psub>	359	Contains the current port id while executing C<rcv> callbacks or C<psub>
276	blocks.	360	blocks.
277		361
278	=item SELF, %SELF, @SELF...	362	=item *SELF, SELF, %SELF, @SELF...
279		363
280	Due to some quirks in how perl exports variables, it is impossible to	364	Due to some quirks in how perl exports variables, it is impossible to
281	just export C<$SELF>, all the symbols called C<SELF> are exported by this	365	just export C<$SELF>, all the symbols named C<SELF> are exported by this
282	module, but only C<$SELF> is currently used.	366	module, but only C<$SELF> is currently used.
283		367
284	=item snd $port, type => @data	368	=item snd $port, type => @data
285		369
286	=item snd $port, @msg	370	=item snd $port, @msg
287		371
288	Send the given message to the given port ID, which can identify either	372	Send the given message to the given port, which can identify either a
289	a local or a remote port, and can be either a string or soemthignt hat	373	local or a remote port, and must be a port ID.
290	stringifies a sa port ID (such as a port object :).
291		374
292	While the message can be about anything, it is highly recommended to use a	375	While the message can be almost anything, it is highly recommended to
293	string as first element (a portid, or some word that indicates a request	376	use a string as first element (a port ID, or some word that indicates a
294	type etc.).	377	request type etc.) and to consist if only simple perl values (scalars,
		378	arrays, hashes) - if you think you need to pass an object, think again.
295		379
296	The message data effectively becomes read-only after a call to this	380	The message data logically becomes read-only after a call to this
297	function: modifying any argument is not allowed and can cause many	381	function: modifying any argument (or values referenced by them) is
298	problems.	382	forbidden, as there can be considerable time between the call to C<snd>
		383	and the time the message is actually being serialised - in fact, it might
		384	never be copied as within the same process it is simply handed to the
		385	receiving port.
299		386
300	The type of data you can transfer depends on the transport protocol: when	387	The type of data you can transfer depends on the transport protocol: when
301	JSON is used, then only strings, numbers and arrays and hashes consisting	388	JSON is used, then only strings, numbers and arrays and hashes consisting
302	of those are allowed (no objects). When Storable is used, then anything	389	of those are allowed (no objects). When Storable is used, then anything
303	that Storable can serialise and deserialise is allowed, and for the local	390	that Storable can serialise and deserialise is allowed, and for the local
304	node, anything can be passed.	391	node, anything can be passed. Best rely only on the common denominator of
		392	these.
305		393
306	=item $local_port = port	394	=item $local_port = port
307		395
308	Create a new local port object that can be used either as a pattern	396	Create a new local port object and returns its port ID. Initially it has
309	matching port ("full port") or a single-callback port ("miniport"),	397	no callbacks set and will throw an error when it receives messages.
310	depending on how C<rcv> callbacks are bound to the object.
311		398
312	=item $port = port { my @msg = @_; $finished }	399	=item $local_port = port { my @msg = @_ }
313		400
314	Creates a "miniport", that is, a very lightweight port without any pattern	401	Creates a new local port, and returns its ID. Semantically the same as
315	matching behind it, and returns its ID. Semantically the same as creating
316	a port and calling C<rcv $port, $callback> on it.	402	creating a port and calling C<rcv $port, $callback> on it.
317		403
318	The block will be called for every message received on the port. When the	404	The block will be called for every message received on the port, with the
319	callback returns a true value its job is considered "done" and the port	405	global variable C<$SELF> set to the port ID. Runtime errors will cause the
320	will be destroyed. Otherwise it will stay alive.	406	port to be C<kil>ed. The message will be passed as-is, no extra argument
		407	(i.e. no port ID) will be passed to the callback.
321		408
322	The message will be passed as-is, no extra argument (i.e. no port id) will	409	If you want to stop/destroy the port, simply C<kil> it:
323	be passed to the callback.
324		410
325	If you need the local port id in the callback, this works nicely:	411	my $port = port {
326		412	my @msg = @_;
327	my $port; $port = port {	413	...
328	snd $otherport, reply => $port;	414	kil $SELF;
329	};	415	};
330		416
331	=cut	417	=cut
332		418
333	sub rcv($@);	419	sub rcv($@);
334		420
		421	my $KILME = sub {
		422	(my $tag = substr $_[0], 0, 30) =~ s/([^\x20-\x7e])/./g;
		423	kil $SELF, unhandled_message => "no callback found for message '$tag'";
		424	};
		425
335	sub port(;&) {	426	sub port(;&) {
336	my $id = "$UNIQ." . $ID++;	427	my $id = $UNIQ . ++$ID;
337	my $port = "$NODE#$id";	428	my $port = "$NODE#$id";
338		429
339	if (@_) {
340	rcv $port, shift;	430	rcv $port, shift || $KILME;
341	} else {
342	$PORT{$id} = sub { }; # nop
343	}
344		431
345	$port	432	$port
346	}	433	}
347		434
348	=item reg $port, $name
349
350	=item reg $name
351
352	Registers the given port (or C<$SELF><<< if missing) under the name
353	C<$name>. If the name already exists it is replaced.
354
355	A port can only be registered under one well known name.
356
357	A port automatically becomes unregistered when it is killed.
358
359	=cut
360
361	sub reg(@) {
362	my $port = @_ > 1 ? shift : $SELF || Carp::croak 'reg: called with one argument only, but $SELF not set,';
363
364	$REG{$_[0]} = $port;
365	}
366
367	=item rcv $port, $callback->(@msg)	435	=item rcv $local_port, $callback->(@msg)
368		436
369	Replaces the callback on the specified miniport (after converting it to	437	Replaces the default callback on the specified port. There is no way to
370	one if required).	438	remove the default callback: use C<sub { }> to disable it, or better
371		439	C<kil> the port when it is no longer needed.
372	=item rcv $port, tagstring => $callback->(@msg), ...
373
374	=item rcv $port, $smartmatch => $callback->(@msg), ...
375
376	=item rcv $port, [$smartmatch...] => $callback->(@msg), ...
377
378	Register callbacks to be called on matching messages on the given full
379	port (after converting it to one if required) and return the port.
380
381	The callback has to return a true value when its work is done, after
382	which is will be removed, or a false value in which case it will stay
383	registered.
384		440
385	The global C<$SELF> (exported by this module) contains C<$port> while	441	The global C<$SELF> (exported by this module) contains C<$port> while
386	executing the callback.	442	executing the callback. Runtime errors during callback execution will
		443	result in the port being C<kil>ed.
387		444
388	Runtime errors during callback execution will result in the port being	445	The default callback receives all messages not matched by a more specific
389	C<kil>ed.	446	C<tag> match.
390		447
391	If the match is an array reference, then it will be matched against the	448	=item rcv $local_port, tag => $callback->(@msg_without_tag), ...
392	first elements of the message, otherwise only the first element is being
393	matched.
394		449
395	Any element in the match that is specified as C<_any_> (a function	450	Register (or replace) callbacks to be called on messages starting with the
396	exported by this module) matches any single element of the message.	451	given tag on the given port (and return the port), or unregister it (when
		452	C<$callback> is C<$undef> or missing). There can only be one callback
		453	registered for each tag.
397		454
398	While not required, it is highly recommended that the first matching	455	The original message will be passed to the callback, after the first
399	element is a string identifying the message. The one-string-only match is	456	element (the tag) has been removed. The callback will use the same
400	also the most efficient match (by far).	457	environment as the default callback (see above).
401		458
402	Example: create a port and bind receivers on it in one go.	459	Example: create a port and bind receivers on it in one go.
403		460
404	my $port = rcv port,	461	my $port = rcv port,
405	msg1 => sub { ...; 0 },	462	msg1 => sub { ... },
406	msg2 => sub { ...; 0 },	463	msg2 => sub { ... },
407	;	464	;
408		465
409	Example: create a port, bind receivers and send it in a message elsewhere	466	Example: create a port, bind receivers and send it in a message elsewhere
410	in one go:	467	in one go:
411		468
412	snd $otherport, reply =>	469	snd $otherport, reply =>
413	rcv port,	470	rcv port,
414	msg1 => sub { ...; 0 },	471	msg1 => sub { ... },
415	...	472	...
416	;	473	;
417		474
		475	Example: temporarily register a rcv callback for a tag matching some port
		476	(e.g. for an rpc reply) and unregister it after a message was received.
		477
		478	rcv $port, $otherport => sub {
		479	my @reply = @_;
		480
		481	rcv $SELF, $otherport;
		482	};
		483
418	=cut	484	=cut
419		485
420	sub rcv($@) {	486	sub rcv($@) {
421	my $port = shift;	487	my $port = shift;
422	my ($noderef, $portid) = split /#/, $port, 2;	488	my ($nodeid, $portid) = split /#/, $port, 2;
423		489
424	($NODE{$noderef} || add_node $noderef) == $NODE{""}	490	$nodeid eq $NODE
425	or Carp::croak "$port: rcv can only be called on local ports, caught";	491	or Carp::croak "$port: rcv can only be called on local ports, caught";
426		492
427	if (@_ == 1) {	493	while (@_) {
		494	if (ref $_[0]) {
		495	if (my $self = $PORT_DATA{$portid}) {
		496	"AnyEvent::MP::Port" eq ref $self
		497	or Carp::croak "$port: rcv can only be called on message matching ports, caught";
		498
		499	$self->[0] = shift;
		500	} else {
428	my $cb = shift;	501	my $cb = shift;
429	delete $PORT_DATA{$portid};
430	$PORT{$portid} = sub {	502	$PORT{$portid} = sub {
431	local $SELF = $port;	503	local $SELF = $port;
432	eval {	504	eval { &$cb }; _self_die if $@;
433	&$cb	505	};
434	and kil $port;
435	};	506	}
436	_self_die if $@;	507	} elsif (defined $_[0]) {
437	};
438	} else {
439	my $self = $PORT_DATA{$portid} ||= do {	508	my $self = $PORT_DATA{$portid} ||= do {
440	my $self = bless {	509	my $self = bless [$PORT{$portid} || sub { }, { }, $port], "AnyEvent::MP::Port";
441	id => $port,
442	}, "AnyEvent::MP::Port";
443		510
444	$PORT{$portid} = sub {	511	$PORT{$portid} = sub {
445	local $SELF = $port;	512	local $SELF = $port;
446		513
447	eval {
448	for (@{ $self->{rc0}{$_[0]} }) {	514	if (my $cb = $self->[1]{$_[0]}) {
449	$_ && &{$_->[0]}	515	shift;
450	&& undef $_;	516	eval { &$cb }; _self_die if $@;
451	}	517	} else {
452
453	for (@{ $self->{rcv}{$_[0]} }) {
454	$_ && [@_[1 .. @{$_->[1]}]] ~~ $_->[1]
455	&& &{$_->[0]}	518	&{ $self->[0] };
456	&& undef $_;
457	}
458
459	for (@{ $self->{any} }) {
460	$_ && [@_[0 .. $#{$_->[1]}]] ~~ $_->[1]
461	&& &{$_->[0]}
462	&& undef $_;
463	}	519	}
464	};	520	};
465	_self_die if $@;	521
		522	$self
466	};	523	};
467		524
468	$self
469	};
470
471	"AnyEvent::MP::Port" eq ref $self	525	"AnyEvent::MP::Port" eq ref $self
472	or Carp::croak "$port: rcv can only be called on message matching ports, caught";	526	or Carp::croak "$port: rcv can only be called on message matching ports, caught";
473		527
474	while (@_) {
475	my ($match, $cb) = splice @_, 0, 2;	528	my ($tag, $cb) = splice @_, 0, 2;
476		529
477	if (!ref $match) {	530	if (defined $cb) {
478	push @{ $self->{rc0}{$match} }, [$cb];	531	$self->[1]{$tag} = $cb;
479	} elsif (("ARRAY" eq ref $match && !ref $match->[0])) {
480	my ($type, @match) = @$match;
481	@match
482	? push @{ $self->{rcv}{$match->[0]} }, [$cb, \@match]
483	: push @{ $self->{rc0}{$match->[0]} }, [$cb];
484	} else {	532	} else {
485	push @{ $self->{any} }, [$cb, $match];	533	delete $self->[1]{$tag};
486	}	534	}
487	}	535	}
488	}	536	}
489		537
490	$port	538	$port
491	}	539	}
492		540
		541	=item peval $port, $coderef[, @args]
		542
		543	Evaluates the given C<$codref> within the context of C<$port>, that is,
		544	when the code throws an exception the C<$port> will be killed.
		545
		546	Any remaining args will be passed to the callback. Any return values will
		547	be returned to the caller.
		548
		549	This is useful when you temporarily want to execute code in the context of
		550	a port.
		551
		552	Example: create a port and run some initialisation code in it's context.
		553
		554	my $port = port { ... };
		555
		556	peval $port, sub {
		557	init
		558	or die "unable to init";
		559	};
		560
		561	=cut
		562
		563	sub peval($$) {
		564	local $SELF = shift;
		565	my $cb = shift;
		566
		567	if (wantarray) {
		568	my @res = eval { &$cb };
		569	_self_die if $@;
		570	@res
		571	} else {
		572	my $res = eval { &$cb };
		573	_self_die if $@;
		574	$res
		575	}
		576	}
		577
493	=item $closure = psub { BLOCK }	578	=item $closure = psub { BLOCK }
494		579
495	Remembers C<$SELF> and creates a closure out of the BLOCK. When the	580	Remembers C<$SELF> and creates a closure out of the BLOCK. When the
496	closure is executed, sets up the environment in the same way as in C<rcv>	581	closure is executed, sets up the environment in the same way as in C<rcv>
497	callbacks, i.e. runtime errors will cause the port to get C<kil>ed.	582	callbacks, i.e. runtime errors will cause the port to get C<kil>ed.
		583
		584	The effect is basically as if it returned C<< sub { peval $SELF, sub {
		585	BLOCK }, @_ } >>.
498		586
499	This is useful when you register callbacks from C<rcv> callbacks:	587	This is useful when you register callbacks from C<rcv> callbacks:
500		588
501	rcv delayed_reply => sub {	589	rcv delayed_reply => sub {
502	my ($delay, @reply) = @_;	590	my ($delay, @reply) = @_;
…		…
526	$res	614	$res
527	}	615	}
528	}	616	}
529	}	617	}
530		618
531	=item $guard = mon $port, $cb->(@reason)	619	=item $guard = mon $port, $rcvport # kill $rcvport when $port dies
532		620
533	=item $guard = mon $port, $rcvport	621	=item $guard = mon $port # kill $SELF when $port dies
534		622
535	=item $guard = mon $port	623	=item $guard = mon $port, $cb->(@reason) # call $cb when $port dies
536		624
537	=item $guard = mon $port, $rcvport, @msg	625	=item $guard = mon $port, $rcvport, @msg # send a message when $port dies
538		626
539	Monitor the given port and do something when the port is killed or	627	Monitor the given port and do something when the port is killed or
540	messages to it were lost, and optionally return a guard that can be used	628	messages to it were lost, and optionally return a guard that can be used
541	to stop monitoring again.	629	to stop monitoring again.
542		630
		631	The first two forms distinguish between "normal" and "abnormal" kil's:
		632
		633	In the first form (another port given), if the C<$port> is C<kil>'ed with
		634	a non-empty reason, the other port (C<$rcvport>) will be kil'ed with the
		635	same reason. That is, on "normal" kil's nothing happens, while under all
		636	other conditions, the other port is killed with the same reason.
		637
		638	The second form (kill self) is the same as the first form, except that
		639	C<$rvport> defaults to C<$SELF>.
		640
		641	The remaining forms don't distinguish between "normal" and "abnormal" kil's
		642	- it's up to the callback or receiver to check whether the C<@reason> is
		643	empty and act accordingly.
		644
		645	In the third form (callback), the callback is simply called with any
		646	number of C<@reason> elements (empty @reason means that the port was deleted
		647	"normally"). Note also that I<< the callback B<must> never die >>, so use
		648	C<eval> if unsure.
		649
		650	In the last form (message), a message of the form C<$rcvport, @msg,
		651	@reason> will be C<snd>.
		652
		653	Monitoring-actions are one-shot: once messages are lost (and a monitoring
		654	alert was raised), they are removed and will not trigger again, even if it
		655	turns out that the port is still alive.
		656
		657	As a rule of thumb, monitoring requests should always monitor a remote
		658	port locally (using a local C<$rcvport> or a callback). The reason is that
		659	kill messages might get lost, just like any other message. Another less
		660	obvious reason is that even monitoring requests can get lost (for example,
		661	when the connection to the other node goes down permanently). When
		662	monitoring a port locally these problems do not exist.
		663
543	C<mon> effectively guarantees that, in the absence of hardware failures,	664	C<mon> effectively guarantees that, in the absence of hardware failures,
544	that after starting the monitor, either all messages sent to the port	665	after starting the monitor, either all messages sent to the port will
545	will arrive, or the monitoring action will be invoked after possible	666	arrive, or the monitoring action will be invoked after possible message
546	message loss has been detected. No messages will be lost "in between"	667	loss has been detected. No messages will be lost "in between" (after
547	(after the first lost message no further messages will be received by the	668	the first lost message no further messages will be received by the
548	port). After the monitoring action was invoked, further messages might get	669	port). After the monitoring action was invoked, further messages might get
549	delivered again.	670	delivered again.
550		671
551	In the first form (callback), the callback is simply called with any	672	Inter-host-connection timeouts and monitoring depend on the transport
552	number of C<@reason> elements (no @reason means that the port was deleted	673	used. The only transport currently implemented is TCP, and AnyEvent::MP
553	"normally"). Note also that I<< the callback B<must> never die >>, so use	674	relies on TCP to detect node-downs (this can take 10-15 minutes on a
554	C<eval> if unsure.	675	non-idle connection, and usually around two hours for idle connections).
555		676
556	In the second form (another port given), the other port (C<$rcvport>)	677	This means that monitoring is good for program errors and cleaning up
557	will be C<kil>'ed with C<@reason>, iff a @reason was specified, i.e. on	678	stuff eventually, but they are no replacement for a timeout when you need
558	"normal" kils nothing happens, while under all other conditions, the other	679	to ensure some maximum latency.
559	port is killed with the same reason.
560
561	The third form (kill self) is the same as the second form, except that
562	C<$rvport> defaults to C<$SELF>.
563
564	In the last form (message), a message of the form C<@msg, @reason> will be
565	C<snd>.
566
567	As a rule of thumb, monitoring requests should always monitor a port from
568	a local port (or callback). The reason is that kill messages might get
569	lost, just like any other message. Another less obvious reason is that
570	even monitoring requests can get lost (for exmaple, when the connection
571	to the other node goes down permanently). When monitoring a port locally
572	these problems do not exist.
573		680
574	Example: call a given callback when C<$port> is killed.	681	Example: call a given callback when C<$port> is killed.
575		682
576	mon $port, sub { warn "port died because of <@_>\n" };	683	mon $port, sub { warn "port died because of <@_>\n" };
577		684
…		…
584	mon $port, $self => "restart";	691	mon $port, $self => "restart";
585		692
586	=cut	693	=cut
587		694
588	sub mon {	695	sub mon {
589	my ($noderef, $port) = split /#/, shift, 2;	696	my ($nodeid, $port) = split /#/, shift, 2;
590		697
591	my $node = $NODE{$noderef} || add_node $noderef;	698	my $node = $NODE{$nodeid} || add_node $nodeid;
592		699
593	my $cb = @_ ? shift : $SELF || Carp::croak 'mon: called with one argument only, but $SELF not set,';	700	my $cb = @_ ? shift : $SELF || Carp::croak 'mon: called with one argument only, but $SELF not set,';
594		701
595	unless (ref $cb) {	702	unless (ref $cb) {
596	if (@_) {	703	if (@_) {
…		…
605	}	712	}
606		713
607	$node->monitor ($port, $cb);	714	$node->monitor ($port, $cb);
608		715
609	defined wantarray	716	defined wantarray
610	and AnyEvent::Util::guard { $node->unmonitor ($port, $cb) }	717	and ($cb += 0, Guard::guard { $node->unmonitor ($port, $cb) })
611	}	718	}
612		719
613	=item $guard = mon_guard $port, $ref, $ref...	720	=item $guard = mon_guard $port, $ref, $ref...
614		721
615	Monitors the given C<$port> and keeps the passed references. When the port	722	Monitors the given C<$port> and keeps the passed references. When the port
616	is killed, the references will be freed.	723	is killed, the references will be freed.
617		724
618	Optionally returns a guard that will stop the monitoring.	725	Optionally returns a guard that will stop the monitoring.
619		726
620	This function is useful when you create e.g. timers or other watchers and	727	This function is useful when you create e.g. timers or other watchers and
621	want to free them when the port gets killed:	728	want to free them when the port gets killed (note the use of C<psub>):
622		729
623	$port->rcv (start => sub {	730	$port->rcv (start => sub {
624	my $timer; $timer = mon_guard $port, AE::timer 1, 1, sub {	731	my $timer; $timer = mon_guard $port, AE::timer 1, 1, psub {
625	undef $timer if 0.9 < rand;	732	undef $timer if 0.9 < rand;
626	});	733	});
627	});	734	});
628		735
629	=cut	736	=cut
…		…
638		745
639	=item kil $port[, @reason]	746	=item kil $port[, @reason]
640		747
641	Kill the specified port with the given C<@reason>.	748	Kill the specified port with the given C<@reason>.
642		749
643	If no C<@reason> is specified, then the port is killed "normally" (linked	750	If no C<@reason> is specified, then the port is killed "normally" -
644	ports will not be kileld, or even notified).	751	monitor callback will be invoked, but the kil will not cause linked ports
		752	(C<mon $mport, $lport> form) to get killed.
645		753
646	Otherwise, linked ports get killed with the same reason (second form of	754	If a C<@reason> is specified, then linked ports (C<mon $mport, $lport>
647	C<mon>, see below).	755	form) get killed with the same reason.
648		756
649	Runtime errors while evaluating C<rcv> callbacks or inside C<psub> blocks	757	Runtime errors while evaluating C<rcv> callbacks or inside C<psub> blocks
650	will be reported as reason C<< die => $@ >>.	758	will be reported as reason C<< die => $@ >>.
651		759
652	Transport/communication errors are reported as C<< transport_error =>	760	Transport/communication errors are reported as C<< transport_error =>
653	$message >>.	761	$message >>.
654		762
655	=cut	763	Common idioms:
		764
		765	# silently remove yourself, do not kill linked ports
		766	kil $SELF;
		767
		768	# report a failure in some detail
		769	kil $SELF, failure_mode_1 => "it failed with too high temperature";
		770
		771	# do not waste much time with killing, just die when something goes wrong
		772	open my $fh, "<file"
		773	or die "file: $!";
656		774
657	=item $port = spawn $node, $initfunc[, @initdata]	775	=item $port = spawn $node, $initfunc[, @initdata]
658		776
659	Creates a port on the node C<$node> (which can also be a port ID, in which	777	Creates a port on the node C<$node> (which can also be a port ID, in which
660	case it's the node where that port resides).	778	case it's the node where that port resides).
661		779
662	The port ID of the newly created port is return immediately, and it is	780	The port ID of the newly created port is returned immediately, and it is
663	permissible to immediately start sending messages or monitor the port.	781	possible to immediately start sending messages or to monitor the port.
664		782
665	After the port has been created, the init function is	783	After the port has been created, the init function is called on the remote
666	called. This function must be a fully-qualified function name	784	node, in the same context as a C<rcv> callback. This function must be a
667	(e.g. C<MyApp::Chat::Server::init>). To specify a function in the main	785	fully-qualified function name (e.g. C<MyApp::Chat::Server::init>). To
668	program, use C<::name>.	786	specify a function in the main program, use C<::name>.
669		787
670	If the function doesn't exist, then the node tries to C<require>	788	If the function doesn't exist, then the node tries to C<require>
671	the package, then the package above the package and so on (e.g.	789	the package, then the package above the package and so on (e.g.
672	C<MyApp::Chat::Server>, C<MyApp::Chat>, C<MyApp>) until the function	790	C<MyApp::Chat::Server>, C<MyApp::Chat>, C<MyApp>) until the function
673	exists or it runs out of package names.	791	exists or it runs out of package names.
674		792
675	The init function is then called with the newly-created port as context	793	The init function is then called with the newly-created port as context
676	object (C<$SELF>) and the C<@initdata> values as arguments.	794	object (C<$SELF>) and the C<@initdata> values as arguments. It I<must>
		795	call one of the C<rcv> functions to set callbacks on C<$SELF>, otherwise
		796	the port might not get created.
677		797
678	A common idiom is to pass your own port, monitor the spawned port, and	798	A common idiom is to pass a local port, immediately monitor the spawned
679	in the init function, monitor the original port. This two-way monitoring	799	port, and in the remote init function, immediately monitor the passed
680	ensures that both ports get cleaned up when there is a problem.	800	local port. This two-way monitoring ensures that both ports get cleaned up
		801	when there is a problem.
		802
		803	C<spawn> guarantees that the C<$initfunc> has no visible effects on the
		804	caller before C<spawn> returns (by delaying invocation when spawn is
		805	called for the local node).
681		806
682	Example: spawn a chat server port on C<$othernode>.	807	Example: spawn a chat server port on C<$othernode>.
683		808
684	# this node, executed from within a port context:	809	# this node, executed from within a port context:
685	my $server = spawn $othernode, "MyApp::Chat::Server::connect", $SELF;	810	my $server = spawn $othernode, "MyApp::Chat::Server::connect", $SELF;
…		…
700		825
701	sub _spawn {	826	sub _spawn {
702	my $port = shift;	827	my $port = shift;
703	my $init = shift;	828	my $init = shift;
704		829
		830	# rcv will create the actual port
705	local $SELF = "$NODE#$port";	831	local $SELF = "$NODE#$port";
706	eval {	832	eval {
707	&{ load_func $init }	833	&{ load_func $init }
708	};	834	};
709	_self_die if $@;	835	_self_die if $@;
710	}	836	}
711		837
712	sub spawn(@) {	838	sub spawn(@) {
713	my ($noderef, undef) = split /#/, shift, 2;	839	my ($nodeid, undef) = split /#/, shift, 2;
714		840
715	my $id = "$RUNIQ." . $ID++;	841	my $id = $RUNIQ . ++$ID;
716		842
717	$_[0] =~ /::/	843	$_[0] =~ /::/
718	or Carp::croak "spawn init function must be a fully-qualified name, caught";	844	or Carp::croak "spawn init function must be a fully-qualified name, caught";
719		845
720	($NODE{$noderef} || add_node $noderef)	846	snd_to_func $nodeid, "AnyEvent::MP::_spawn" => $id, @_;
721	->send (["", "AnyEvent::MP::_spawn" => $id, @_]);
722		847
723	"$noderef#$id"	848	"$nodeid#$id"
724	}	849	}
725		850
		851
		852	=item after $timeout, @msg
		853
		854	=item after $timeout, $callback
		855
		856	Either sends the given message, or call the given callback, after the
		857	specified number of seconds.
		858
		859	This is simply a utility function that comes in handy at times - the
		860	AnyEvent::MP author is not convinced of the wisdom of having it, though,
		861	so it may go away in the future.
		862
		863	=cut
		864
		865	sub after($@) {
		866	my ($timeout, @action) = @_;
		867
		868	my $t; $t = AE::timer $timeout, 0, sub {
		869	undef $t;
		870	ref $action[0]
		871	? $action[0]()
		872	: snd @action;
		873	};
		874	}
		875
		876	#=item $cb2 = timeout $seconds, $cb[, @args]
		877
		878	=item cal $port, @msg, $callback[, $timeout]
		879
		880	A simple form of RPC - sends a message to the given C<$port> with the
		881	given contents (C<@msg>), but adds a reply port to the message.
		882
		883	The reply port is created temporarily just for the purpose of receiving
		884	the reply, and will be C<kil>ed when no longer needed.
		885
		886	A reply message sent to the port is passed to the C<$callback> as-is.
		887
		888	If an optional time-out (in seconds) is given and it is not C<undef>,
		889	then the callback will be called without any arguments after the time-out
		890	elapsed and the port is C<kil>ed.
		891
		892	If no time-out is given (or it is C<undef>), then the local port will
		893	monitor the remote port instead, so it eventually gets cleaned-up.
		894
		895	Currently this function returns the temporary port, but this "feature"
		896	might go in future versions unless you can make a convincing case that
		897	this is indeed useful for something.
		898
		899	=cut
		900
		901	sub cal(@) {
		902	my $timeout = ref $_[-1] ? undef : pop;
		903	my $cb = pop;
		904
		905	my $port = port {
		906	undef $timeout;
		907	kil $SELF;
		908	&$cb;
		909	};
		910
		911	if (defined $timeout) {
		912	$timeout = AE::timer $timeout, 0, sub {
		913	undef $timeout;
		914	kil $port;
		915	$cb->();
		916	};
		917	} else {
		918	mon $_[0], sub {
		919	kil $port;
		920	$cb->();
		921	};
		922	}
		923
		924	push @_, $port;
		925	&snd;
		926
		927	$port
		928	}
		929
726	=back	930	=back
727		931
728	=head1 NODE MESSAGES	932	=head1 DISTRIBUTED DATABASE
729		933
730	Nodes understand the following messages sent to them. Many of them take	934	AnyEvent::MP comes with a simple distributed database. The database will
731	arguments called C<@reply>, which will simply be used to compose a reply	935	be mirrored asynchronously on all global nodes. Other nodes bind to one
732	message - C<$reply[0]> is the port to reply to, C<$reply[1]> the type and	936	of the global nodes for their needs. Every node has a "local database"
733	the remaining arguments are simply the message data.	937	which contains all the values that are set locally. All local databases
		938	are merged together to form the global database, which can be queried.
734		939
735	While other messages exist, they are not public and subject to change.	940	The database structure is that of a two-level hash - the database hash
		941	contains hashes which contain values, similarly to a perl hash of hashes,
		942	i.e.:
736		943
		944	$DATABASE{$family}{$subkey} = $value
		945
		946	The top level hash key is called "family", and the second-level hash key
		947	is called "subkey" or simply "key".
		948
		949	The family must be alphanumeric, i.e. start with a letter and consist
		950	of letters, digits, underscores and colons (C<[A-Za-z][A-Za-z0-9_:]*>,
		951	pretty much like Perl module names.
		952
		953	As the family namespace is global, it is recommended to prefix family names
		954	with the name of the application or module using it.
		955
		956	The subkeys must be non-empty strings, with no further restrictions.
		957
		958	The values should preferably be strings, but other perl scalars should
		959	work as well (such as C<undef>, arrays and hashes).
		960
		961	Every database entry is owned by one node - adding the same family/subkey
		962	combination on multiple nodes will not cause discomfort for AnyEvent::MP,
		963	but the result might be nondeterministic, i.e. the key might have
		964	different values on different nodes.
		965
		966	Different subkeys in the same family can be owned by different nodes
		967	without problems, and in fact, this is the common method to create worker
		968	pools. For example, a worker port for image scaling might do this:
		969
		970	db_set my_image_scalers => $port;
		971
		972	And clients looking for an image scaler will want to get the
		973	C<my_image_scalers> keys from time to time:
		974
		975	db_keys my_image_scalers => sub {
		976	@ports = @{ $_[0] };
		977	};
		978
		979	Or better yet, they want to monitor the database family, so they always
		980	have a reasonable up-to-date copy:
		981
		982	db_mon my_image_scalers => sub {
		983	@ports = keys %{ $_[0] };
		984	};
		985
		986	In general, you can set or delete single subkeys, but query and monitor
		987	whole families only.
		988
		989	If you feel the need to monitor or query a single subkey, try giving it
		990	it's own family.
		991
737	=over 4	992	=over
		993
		994	=item $guard = db_set $family => $subkey [=> $value]
		995
		996	Sets (or replaces) a key to the database - if C<$value> is omitted,
		997	C<undef> is used instead.
		998
		999	When called in non-void context, C<db_set> returns a guard that
		1000	automatically calls C<db_del> when it is destroyed.
		1001
		1002	=item db_del $family => $subkey...
		1003
		1004	Deletes one or more subkeys from the database family.
		1005
		1006	=item $guard = db_reg $family => $port => $value
		1007
		1008	=item $guard = db_reg $family => $port
		1009
		1010	=item $guard = db_reg $family
		1011
		1012	Registers a port in the given family and optionally returns a guard to
		1013	remove it.
		1014
		1015	This function basically does the same as:
		1016
		1017	db_set $family => $port => $value
		1018
		1019	Except that the port is monitored and automatically removed from the
		1020	database family when it is kil'ed.
		1021
		1022	If C<$value> is missing, C<undef> is used. If C<$port> is missing, then
		1023	C<$SELF> is used.
		1024
		1025	This function is most useful to register a port in some port group (which
		1026	is just another name for a database family), and have it removed when the
		1027	port is gone. This works best when the port is a local port.
738		1028
739	=cut	1029	=cut
740		1030
741	=item lookup => $name, @reply	1031	sub db_reg($$;$) {
		1032	my $family = shift;
		1033	my $port = @_ ? shift : $SELF;
742		1034
743	Replies with the port ID of the specified well-known port, or C<undef>.	1035	my $clr = sub { db_del $family => $port };
		1036	mon $port, $clr;
744		1037
745	=item devnull => ...	1038	db_set $family => $port => $_[0];
746		1039
747	Generic data sink/CPU heat conversion.	1040	defined wantarray
		1041	and &Guard::guard ($clr)
		1042	}
748		1043
749	=item relay => $port, @msg	1044	=item db_family $family => $cb->(\%familyhash)
750		1045
751	Simply forwards the message to the given port.	1046	Queries the named database C<$family> and call the callback with the
		1047	family represented as a hash. You can keep and freely modify the hash.
752		1048
753	=item eval => $string[ @reply]	1049	=item db_keys $family => $cb->(\@keys)
754		1050
755	Evaluates the given string. If C<@reply> is given, then a message of the	1051	Same as C<db_family>, except it only queries the family I<subkeys> and passes
756	form C<@reply, $@, @evalres> is sent.	1052	them as array reference to the callback.
757		1053
758	Example: crash another node.	1054	=item db_values $family => $cb->(\@values)
759		1055
760	snd $othernode, eval => "exit";	1056	Same as C<db_family>, except it only queries the family I<values> and passes them
		1057	as array reference to the callback.
761		1058
762	=item time => @reply	1059	=item $guard = db_mon $family => $cb->(\%familyhash, \@added, \@changed, \@deleted)
763		1060
764	Replies the the current node time to C<@reply>.	1061	Creates a monitor on the given database family. Each time a key is
		1062	set or is deleted the callback is called with a hash containing the
		1063	database family and three lists of added, changed and deleted subkeys,
		1064	respectively. If no keys have changed then the array reference might be
		1065	C<undef> or even missing.
765		1066
766	Example: tell the current node to send the current time to C<$myport> in a	1067	If not called in void context, a guard object is returned that, when
767	C<timereply> message.	1068	destroyed, stops the monitor.
768		1069
769	snd $NODE, time => $myport, timereply => 1, 2;	1070	The family hash reference and the key arrays belong to AnyEvent::MP and
770	# => snd $myport, timereply => 1, 2, <time>	1071	B<must not be modified or stored> by the callback. When in doubt, make a
		1072	copy.
		1073
		1074	As soon as possible after the monitoring starts, the callback will be
		1075	called with the intiial contents of the family, even if it is empty,
		1076	i.e. there will always be a timely call to the callback with the current
		1077	contents.
		1078
		1079	It is possible that the callback is called with a change event even though
		1080	the subkey is already present and the value has not changed.
		1081
		1082	The monitoring stops when the guard object is destroyed.
		1083
		1084	Example: on every change to the family "mygroup", print out all keys.
		1085
		1086	my $guard = db_mon mygroup => sub {
		1087	my ($family, $a, $c, $d) = @_;
		1088	print "mygroup members: ", (join " ", keys %$family), "\n";
		1089	};
		1090
		1091	Exmaple: wait until the family "My::Module::workers" is non-empty.
		1092
		1093	my $guard; $guard = db_mon My::Module::workers => sub {
		1094	my ($family, $a, $c, $d) = @_;
		1095	return unless %$family;
		1096	undef $guard;
		1097	print "My::Module::workers now nonempty\n";
		1098	};
		1099
		1100	Example: print all changes to the family "AnyEvent::Fantasy::Module".
		1101
		1102	my $guard = db_mon AnyEvent::Fantasy::Module => sub {
		1103	my ($family, $a, $c, $d) = @_;
		1104
		1105	print "+$_=$family->{$_}\n" for @$a;
		1106	print "*$_=$family->{$_}\n" for @$c;
		1107	print "-$_=$family->{$_}\n" for @$d;
		1108	};
		1109
		1110	=cut
771		1111
772	=back	1112	=back
773		1113
774	=head1 AnyEvent::MP vs. Distributed Erlang	1114	=head1 AnyEvent::MP vs. Distributed Erlang
775		1115
776	AnyEvent::MP got lots of its ideas from distributed Erlang (Erlang node	1116	AnyEvent::MP got lots of its ideas from distributed Erlang (Erlang node
777	== aemp node, Erlang process == aemp port), so many of the documents and	1117	== aemp node, Erlang process == aemp port), so many of the documents and
778	programming techniques employed by Erlang apply to AnyEvent::MP. Here is a	1118	programming techniques employed by Erlang apply to AnyEvent::MP. Here is a
779	sample:	1119	sample:
780		1120
781	http://www.Erlang.se/doc/programming_rules.shtml	1121	http://www.erlang.se/doc/programming_rules.shtml
782	http://Erlang.org/doc/getting_started/part_frame.html # chapters 3 and 4	1122	http://erlang.org/doc/getting_started/part_frame.html # chapters 3 and 4
783	http://Erlang.org/download/Erlang-book-part1.pdf # chapters 5 and 6	1123	http://erlang.org/download/erlang-book-part1.pdf # chapters 5 and 6
784	http://Erlang.org/download/armstrong_thesis_2003.pdf # chapters 4 and 5	1124	http://erlang.org/download/armstrong_thesis_2003.pdf # chapters 4 and 5
785		1125
786	Despite the similarities, there are also some important differences:	1126	Despite the similarities, there are also some important differences:
787		1127
788	=over 4	1128	=over 4
789		1129
790	=item * Node references contain the recipe on how to contact them.	1130	=item * Node IDs are arbitrary strings in AEMP.
791		1131
792	Erlang relies on special naming and DNS to work everywhere in the	1132	Erlang relies on special naming and DNS to work everywhere in the same
793	same way. AEMP relies on each node knowing it's own address(es), with	1133	way. AEMP relies on each node somehow knowing its own address(es) (e.g. by
794	convenience functionality.	1134	configuration or DNS), and possibly the addresses of some seed nodes, but
		1135	will otherwise discover other nodes (and their IDs) itself.
795		1136
796	This means that AEMP requires a less tightly controlled environment at the	1137	=item * Erlang has a "remote ports are like local ports" philosophy, AEMP
797	cost of longer node references and a slightly higher management overhead.	1138	uses "local ports are like remote ports".
		1139
		1140	The failure modes for local ports are quite different (runtime errors
		1141	only) then for remote ports - when a local port dies, you I<know> it dies,
		1142	when a connection to another node dies, you know nothing about the other
		1143	port.
		1144
		1145	Erlang pretends remote ports are as reliable as local ports, even when
		1146	they are not.
		1147
		1148	AEMP encourages a "treat remote ports differently" philosophy, with local
		1149	ports being the special case/exception, where transport errors cannot
		1150	occur.
798		1151
799	=item * Erlang uses processes and a mailbox, AEMP does not queue.	1152	=item * Erlang uses processes and a mailbox, AEMP does not queue.
800		1153
801	Erlang uses processes that selctively receive messages, and therefore	1154	Erlang uses processes that selectively receive messages out of order, and
802	needs a queue. AEMP is event based, queuing messages would serve no useful	1155	therefore needs a queue. AEMP is event based, queuing messages would serve
803	purpose.	1156	no useful purpose. For the same reason the pattern-matching abilities
		1157	of AnyEvent::MP are more limited, as there is little need to be able to
		1158	filter messages without dequeuing them.
804		1159
805	(But see L<Coro::MP> for a more Erlang-like process model on top of AEMP).	1160	This is not a philosophical difference, but simply stems from AnyEvent::MP
		1161	being event-based, while Erlang is process-based.
		1162
		1163	You can have a look at L<Coro::MP> for a more Erlang-like process model on
		1164	top of AEMP and Coro threads.
806		1165
807	=item * Erlang sends are synchronous, AEMP sends are asynchronous.	1166	=item * Erlang sends are synchronous, AEMP sends are asynchronous.
808		1167
809	Sending messages in Erlang is synchronous and blocks the process. AEMP	1168	Sending messages in Erlang is synchronous and blocks the process until
810	sends are immediate, connection establishment is handled in the	1169	a connection has been established and the message sent (and so does not
811	background.	1170	need a queue that can overflow). AEMP sends return immediately, connection
		1171	establishment is handled in the background.
812		1172
813	=item * Erlang can silently lose messages, AEMP cannot.	1173	=item * Erlang suffers from silent message loss, AEMP does not.
814		1174
815	Erlang makes few guarantees on messages delivery - messages can get lost	1175	Erlang implements few guarantees on messages delivery - messages can get
816	without any of the processes realising it (i.e. you send messages a, b,	1176	lost without any of the processes realising it (i.e. you send messages a,
817	and c, and the other side only receives messages a and c).	1177	b, and c, and the other side only receives messages a and c).
818		1178
819	AEMP guarantees correct ordering, and the guarantee that there are no	1179	AEMP guarantees (modulo hardware errors) correct ordering, and the
		1180	guarantee that after one message is lost, all following ones sent to the
		1181	same port are lost as well, until monitoring raises an error, so there are
820	holes in the message sequence.	1182	no silent "holes" in the message sequence.
821		1183
822	=item * In Erlang, processes can be declared dead and later be found to be	1184	If you want your software to be very reliable, you have to cope with
823	alive.	1185	corrupted and even out-of-order messages in both Erlang and AEMP. AEMP
824		1186	simply tries to work better in common error cases, such as when a network
825	In Erlang it can happen that a monitored process is declared dead and	1187	link goes down.
826	linked processes get killed, but later it turns out that the process is
827	still alive - and can receive messages.
828
829	In AEMP, when port monitoring detects a port as dead, then that port will
830	eventually be killed - it cannot happen that a node detects a port as dead
831	and then later sends messages to it, finding it is still alive.
832		1188
833	=item * Erlang can send messages to the wrong port, AEMP does not.	1189	=item * Erlang can send messages to the wrong port, AEMP does not.
834		1190
835	In Erlang it is quite possible that a node that restarts reuses a process	1191	In Erlang it is quite likely that a node that restarts reuses an Erlang
836	ID known to other nodes for a completely different process, causing	1192	process ID known to other nodes for a completely different process,
837	messages destined for that process to end up in an unrelated process.	1193	causing messages destined for that process to end up in an unrelated
		1194	process.
838		1195
839	AEMP never reuses port IDs, so old messages or old port IDs floating	1196	AEMP does not reuse port IDs, so old messages or old port IDs floating
840	around in the network will not be sent to an unrelated port.	1197	around in the network will not be sent to an unrelated port.
841		1198
842	=item * Erlang uses unprotected connections, AEMP uses secure	1199	=item * Erlang uses unprotected connections, AEMP uses secure
843	authentication and can use TLS.	1200	authentication and can use TLS.
844		1201
845	AEMP can use a proven protocol - SSL/TLS - to protect connections and	1202	AEMP can use a proven protocol - TLS - to protect connections and
846	securely authenticate nodes.	1203	securely authenticate nodes.
847		1204
848	=item * The AEMP protocol is optimised for both text-based and binary	1205	=item * The AEMP protocol is optimised for both text-based and binary
849	communications.	1206	communications.
850		1207
851	The AEMP protocol, unlike the Erlang protocol, supports both	1208	The AEMP protocol, unlike the Erlang protocol, supports both programming
852	language-independent text-only protocols (good for debugging) and binary,	1209	language independent text-only protocols (good for debugging), and binary,
853	language-specific serialisers (e.g. Storable).	1210	language-specific serialisers (e.g. Storable). By default, unless TLS is
		1211	used, the protocol is actually completely text-based.
854		1212
855	It has also been carefully designed to be implementable in other languages	1213	It has also been carefully designed to be implementable in other languages
856	with a minimum of work while gracefully degrading fucntionality to make the	1214	with a minimum of work while gracefully degrading functionality to make the
857	protocol simple.	1215	protocol simple.
858		1216
859	=item * AEMP has more flexible monitoring options than Erlang.	1217	=item * AEMP has more flexible monitoring options than Erlang.
860		1218
861	In Erlang, you can chose to receive I<all> exit signals as messages	1219	In Erlang, you can chose to receive I<all> exit signals as messages or
862	or I<none>, there is no in-between, so monitoring single processes is	1220	I<none>, there is no in-between, so monitoring single Erlang processes is
863	difficult to implement. Monitoring in AEMP is more flexible than in	1221	difficult to implement.
864	Erlang, as one can choose between automatic kill, exit message or callback	1222
865	on a per-process basis.	1223	Monitoring in AEMP is more flexible than in Erlang, as one can choose
		1224	between automatic kill, exit message or callback on a per-port basis.
866		1225
867	=item * Erlang tries to hide remote/local connections, AEMP does not.	1226	=item * Erlang tries to hide remote/local connections, AEMP does not.
868		1227
869	Monitoring in Erlang is not an indicator of process death/crashes,	1228	Monitoring in Erlang is not an indicator of process death/crashes, in the
870	as linking is (except linking is unreliable in Erlang).	1229	same way as linking is (except linking is unreliable in Erlang).
871		1230
872	In AEMP, you don't "look up" registered port names or send to named ports	1231	In AEMP, you don't "look up" registered port names or send to named ports
873	that might or might not be persistent. Instead, you normally spawn a port	1232	that might or might not be persistent. Instead, you normally spawn a port
874	on the remote node. The init function monitors the you, and you monitor	1233	on the remote node. The init function monitors you, and you monitor the
875	the remote port. Since both monitors are local to the node, they are much	1234	remote port. Since both monitors are local to the node, they are much more
876	more reliable.	1235	reliable (no need for C<spawn_link>).
877		1236
878	This also saves round-trips and avoids sending messages to the wrong port	1237	This also saves round-trips and avoids sending messages to the wrong port
879	(hard to do in Erlang).	1238	(hard to do in Erlang).
880		1239
881	=back	1240	=back
882		1241
883	=head1 RATIONALE	1242	=head1 RATIONALE
884		1243
885	=over 4	1244	=over 4
886		1245
887	=item Why strings for ports and noderefs, why not objects?	1246	=item Why strings for port and node IDs, why not objects?
888		1247
889	We considered "objects", but found that the actual number of methods	1248	We considered "objects", but found that the actual number of methods
890	thatc an be called are very low. Since port IDs and noderefs travel over	1249	that can be called are quite low. Since port and node IDs travel over
891	the network frequently, the serialising/deserialising would add lots of	1250	the network frequently, the serialising/deserialising would add lots of
892	overhead, as well as having to keep a proxy object.	1251	overhead, as well as having to keep a proxy object everywhere.
893		1252
894	Strings can easily be printed, easily serialised etc. and need no special	1253	Strings can easily be printed, easily serialised etc. and need no special
895	procedures to be "valid".	1254	procedures to be "valid".
896		1255
897	And a a miniport consists of a single closure stored in a global hash - it	1256	And as a result, a port with just a default receiver consists of a single
898	can't become much cheaper.	1257	code reference stored in a global hash - it can't become much cheaper.
899		1258
900	=item Why favour JSON, why not real serialising format such as Storable?	1259	=item Why favour JSON, why not a real serialising format such as Storable?
901		1260
902	In fact, any AnyEvent::MP node will happily accept Storable as framing	1261	In fact, any AnyEvent::MP node will happily accept Storable as framing
903	format, but currently there is no way to make a node use Storable by	1262	format, but currently there is no way to make a node use Storable by
904	default.	1263	default (although all nodes will accept it).
905		1264
906	The default framing protocol is JSON because a) JSON::XS is many times	1265	The default framing protocol is JSON because a) JSON::XS is many times
907	faster for small messages and b) most importantly, after years of	1266	faster for small messages and b) most importantly, after years of
908	experience we found that object serialisation is causing more problems	1267	experience we found that object serialisation is causing more problems
909	than it gains: Just like function calls, objects simply do not travel	1268	than it solves: Just like function calls, objects simply do not travel
910	easily over the network, mostly because they will always be a copy, so you	1269	easily over the network, mostly because they will always be a copy, so you
911	always have to re-think your design.	1270	always have to re-think your design.
912		1271
913	Keeping your messages simple, concentrating on data structures rather than	1272	Keeping your messages simple, concentrating on data structures rather than
914	objects, will keep your messages clean, tidy and efficient.	1273	objects, will keep your messages clean, tidy and efficient.
915		1274
916	=back	1275	=back
917		1276
		1277	=head1 PORTING FROM AnyEvent::MP VERSION 1.X
		1278
		1279	AEMP version 2 has a few major incompatible changes compared to version 1:
		1280
		1281	=over 4
		1282
		1283	=item AnyEvent::MP::Global no longer has group management functions.
		1284
		1285	At least not officially - the grp_* functions are still exported and might
		1286	work, but they will be removed in some later release.
		1287
		1288	AnyEvent::MP now comes with a distributed database that is more
		1289	powerful. Its database families map closely to port groups, but the API
		1290	has changed (the functions are also now exported by AnyEvent::MP). Here is
		1291	a rough porting guide:
		1292
		1293	grp_reg $group, $port # old
		1294	db_reg $group, $port # new
		1295
		1296	$list = grp_get $group # old
		1297	db_keys $group, sub { my $list = shift } # new
		1298
		1299	grp_mon $group, $cb->(\@ports, $add, $del) # old
		1300	db_mon $group, $cb->(\%ports, $add, $change, $del) # new
		1301
		1302	C<grp_reg> is a no-brainer (just replace by C<db_reg>), but C<grp_get> is
		1303	no longer instant, because the local node might not have a copy of the
		1304	group. You can either modify your code to allow for a callback, or use
		1305	C<db_mon> to keep an updated copy of the group:
		1306
		1307	my $local_group_copy;
		1308	db_mon $group => sub { $local_group_copy = $_[0] };
		1309
		1310	# now "keys %$local_group_copy" always returns the most up-to-date
		1311	# list of ports in the group.
		1312
		1313	C<grp_mon> can be replaced by C<db_mon> with minor changes - C<db_mon>
		1314	passes a hash as first argument, and an extra C<$chg> argument that can be
		1315	ignored:
		1316
		1317	db_mon $group => sub {
		1318	my ($ports, $add, $chg, $del) = @_;
		1319	$ports = [keys %$ports];
		1320
		1321	# now $ports, $add and $del are the same as
		1322	# were originally passed by grp_mon.
		1323	...
		1324	};
		1325
		1326	=item Nodes not longer connect to all other nodes.
		1327
		1328	In AEMP 1.x, every node automatically loads the L<AnyEvent::MP::Global>
		1329	module, which in turn would create connections to all other nodes in the
		1330	network (helped by the seed nodes).
		1331
		1332	In version 2.x, global nodes still connect to all other global nodes, but
		1333	other nodes don't - now every node either is a global node itself, or
		1334	attaches itself to another global node.
		1335
		1336	If a node isn't a global node itself, then it attaches itself to one
		1337	of its seed nodes. If that seed node isn't a global node yet, it will
		1338	automatically be upgraded to a global node.
		1339
		1340	So in many cases, nothing needs to be changed - one just has to make sure
		1341	that all seed nodes are meshed together with the other seed nodes (as with
		1342	AEMP 1.x), and other nodes specify them as seed nodes. This is most easily
		1343	achieved by specifying the same set of seed nodes for all nodes in the
		1344	network.
		1345
		1346	Not opening a connection to every other node is usually an advantage,
		1347	except when you need the lower latency of an already established
		1348	connection. To ensure a node establishes a connection to another node,
		1349	you can monitor the node port (C<mon $node, ...>), which will attempt to
		1350	create the connection (and notify you when the connection fails).
		1351
		1352	=item Listener-less nodes (nodes without binds) are gone.
		1353
		1354	And are not coming back, at least not in their old form. If no C<binds>
		1355	are specified for a node, AnyEvent::MP assumes a default of C<*:*>.
		1356
		1357	There are vague plans to implement some form of routing domains, which
		1358	might or might not bring back listener-less nodes, but don't count on it.
		1359
		1360	The fact that most connections are now optional somewhat mitigates this,
		1361	as a node can be effectively unreachable from the outside without any
		1362	problems, as long as it isn't a global node and only reaches out to other
		1363	nodes (as opposed to being contacted from other nodes).
		1364
		1365	=item $AnyEvent::MP::Kernel::WARN has gone.
		1366
		1367	AnyEvent has acquired a logging framework (L<AnyEvent::Log>), and AEMP now
		1368	uses this, and so should your programs.
		1369
		1370	Every module now documents what kinds of messages it generates, with
		1371	AnyEvent::MP acting as a catch all.
		1372
		1373	On the positive side, this means that instead of setting
		1374	C<PERL_ANYEVENT_MP_WARNLEVEL>, you can get away by setting C<AE_VERBOSE> -
		1375	much less to type.
		1376
		1377	=back
		1378
		1379	=head1 LOGGING
		1380
		1381	AnyEvent::MP does not normally log anything by itself, but since it is the
		1382	root of the context hierarchy for AnyEvent::MP modules, it will receive
		1383	all log messages by submodules.
		1384
918	=head1 SEE ALSO	1385	=head1 SEE ALSO
		1386
		1387	L<AnyEvent::MP::Intro> - a gentle introduction.
		1388
		1389	L<AnyEvent::MP::Kernel> - more, lower-level, stuff.
		1390
		1391	L<AnyEvent::MP::Global> - network maintenance and port groups, to find
		1392	your applications.
		1393
		1394	L<AnyEvent::MP::DataConn> - establish data connections between nodes.
		1395
		1396	L<AnyEvent::MP::LogCatcher> - simple service to display log messages from
		1397	all nodes.
919		1398
920	L<AnyEvent>.	1399	L<AnyEvent>.
921		1400
922	=head1 AUTHOR	1401	=head1 AUTHOR
923		1402

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines