[ViewVC] Diff of: cvs/AnyEvent-MP/MP.pm

Comparing AnyEvent-MP/MP.pm (file contents):
Revision 1.15 by root, Sun Aug 2 19:25:27 2009 UTC vs.
Revision 1.87 by root, Fri Sep 11 02:32:23 2009 UTC

…		…
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	use AnyEvent::MP;	7	use AnyEvent::MP;
8		8
9	NODE # returns this node identifier
10	$NODE # contains this node identifier	9	$NODE # contains this node's node ID
		10	NODE # returns this node's node ID
11		11
		12	$SELF # receiving/own port id in rcv callbacks
		13
		14	# initialise the node so it can send/receive messages
		15	configure;
		16
		17	# ports are message destinations
		18
		19	# sending messages
12	snd $port, type => data...;	20	snd $port, type => data...;
		21	snd $port, @msg;
		22	snd @msg_with_first_element_being_a_port;
13		23
14	rcv $port, smartmatch => $cb->($port, @msg);	24	# creating/using ports, the simple way
		25	my $simple_port = port { my @msg = @_ };
15		26
16	# examples:	27	# creating/using ports, tagged message matching
		28	my $port = port;
17	rcv $port2, ping => sub { snd $_[0], "pong"; 0 };	29	rcv $port, ping => sub { snd $_[0], "pong" };
18	rcv $port1, pong => sub { warn "pong received\n" };	30	rcv $port, pong => sub { warn "pong received\n" };
19	snd $port2, ping => $port1;
20		31
21	# more, smarter, matches (_any_ is exported by this module)	32	# create a port on another node
22	rcv $port, [child_died => $pid] => sub { ...	33	my $port = spawn $node, $initfunc, @initdata;
23	rcv $port, [_any_, _any_, 3] => sub { .. $_[2] is 3	34
		35	# monitoring
		36	mon $port, $cb->(@msg) # callback is invoked on death
		37	mon $port, $otherport # kill otherport on abnormal death
		38	mon $port, $otherport, @msg # send message on death
		39
		40	=head1 CURRENT STATUS
		41
		42	bin/aemp - stable.
		43	AnyEvent::MP - stable API, should work.
		44	AnyEvent::MP::Intro - explains most concepts.
		45	AnyEvent::MP::Kernel - mostly stable.
		46	AnyEvent::MP::Global - stable but incomplete, protocol not yet final.
		47
		48	stay tuned.
24		49
25	=head1 DESCRIPTION	50	=head1 DESCRIPTION
26		51
27	This module (-family) implements a simple message passing framework.	52	This module (-family) implements a simple message passing framework.
28		53
29	Despite its simplicity, you can securely message other processes running	54	Despite its simplicity, you can securely message other processes running
30	on the same or other hosts.	55	on the same or other hosts, and you can supervise entities remotely.
31		56
32	At the moment, this module family is severly brokena nd underdocumented,	57	For an introduction to this module family, see the L<AnyEvent::MP::Intro>
33	so do not use. This was uploaded mainly to resreve the CPAN namespace -	58	manual page and the examples under F<eg/>.
34	stay tuned!
35		59
36	=head1 CONCEPTS	60	=head1 CONCEPTS
37		61
38	=over 4	62	=over 4
39		63
40	=item port	64	=item port
41		65
42	A port is something you can send messages to with the C<snd> function, and	66	Not to be confused with a TCP port, a "port" is something you can send
43	you can register C<rcv> handlers with. All C<rcv> handlers will receive	67	messages to (with the C<snd> function).
44	messages they match, messages will not be queued.
45		68
		69	Ports allow you to register C<rcv> handlers that can match all or just
		70	some messages. Messages send to ports will not be queued, regardless of
		71	anything was listening for them or not.
		72
46	=item port id - C<noderef#portname>	73	=item port ID - C<nodeid#portname>
47		74
48	A port id is always the noderef, a hash-mark (C<#>) as separator, followed	75	A port ID is the concatenation of a node ID, a hash-mark (C<#>) as
49	by a port name (a printable string of unspecified format).	76	separator, and a port name (a printable string of unspecified format).
50		77
51	=item node	78	=item node
52		79
53	A node is a single process containing at least one port - the node	80	A node is a single process containing at least one port - the node port,
54	port. You can send messages to node ports to let them create new ports,	81	which enables nodes to manage each other remotely, and to create new
55	among other things.	82	ports.
56		83
57	Initially, nodes are either private (single-process only) or hidden	84	Nodes are either public (have one or more listening ports) or private
58	(connected to a master node only). Only when they epxlicitly "become	85	(no listening ports). Private nodes cannot talk to other private nodes
59	public" can you send them messages from unrelated other nodes.	86	currently.
60		87
61	=item noderef - C<host:port,host:port...>, C<id@noderef>, C<id>	88	=item node ID - C<[A-Z_][a-zA-Z0-9_\-.:]*>
62		89
63	A noderef is a string that either uniquely identifies a given node (for	90	A node ID is a string that uniquely identifies the node within a
64	private and hidden nodes), or contains a recipe on how to reach a given	91	network. Depending on the configuration used, node IDs can look like a
65	node (for public nodes).	92	hostname, a hostname and a port, or a random string. AnyEvent::MP itself
		93	doesn't interpret node IDs in any way.
		94
		95	=item binds - C<ip:port>
		96
		97	Nodes can only talk to each other by creating some kind of connection to
		98	each other. To do this, nodes should listen on one or more local transport
		99	endpoints - binds. Currently, only standard C<ip:port> specifications can
		100	be used, which specify TCP ports to listen on.
		101
		102	=item seed nodes
		103
		104	When a node starts, it knows nothing about the network. To teach the node
		105	about the network it first has to contact some other node within the
		106	network. This node is called a seed.
		107
		108	Apart from the fact that other nodes know them as seed nodes and they have
		109	to have fixed listening addresses, seed nodes are perfectly normal nodes -
		110	any node can function as a seed node for others.
		111
		112	In addition to discovering the network, seed nodes are also used to
		113	maintain the network and to connect nodes that otherwise would have
		114	trouble connecting. They form the backbone of an AnyEvent::MP network.
		115
		116	Seed nodes are expected to be long-running, and at least one seed node
		117	should always be available. They should also be relatively responsive - a
		118	seed node that blocks for long periods will slow down everybody else.
		119
		120	=item seeds - C<host:port>
		121
		122	Seeds are transport endpoint(s) (usually a hostname/IP address and a
		123	TCP port) of nodes thta should be used as seed nodes.
		124
		125	The nodes listening on those endpoints are expected to be long-running,
		126	and at least one of those should always be available. When nodes run out
		127	of connections (e.g. due to a network error), they try to re-establish
		128	connections to some seednodes again to join the network.
66		129
67	=back	130	=back
68		131
69	=head1 VARIABLES/FUNCTIONS	132	=head1 VARIABLES/FUNCTIONS
70		133
…		…
72		135
73	=cut	136	=cut
74		137
75	package AnyEvent::MP;	138	package AnyEvent::MP;
76		139
77	use AnyEvent::MP::Base;	140	use AnyEvent::MP::Kernel;
78		141
79	use common::sense;	142	use common::sense;
80		143
81	use Carp ();	144	use Carp ();
82		145
83	use AE ();	146	use AE ();
84		147
85	use base "Exporter";	148	use base "Exporter";
86		149
87	our $VERSION = '0.02';	150	our $VERSION = $AnyEvent::MP::Kernel::VERSION;
		151
88	our @EXPORT = qw(	152	our @EXPORT = qw(
89	NODE $NODE $PORT snd rcv _any_	153	NODE $NODE *SELF node_of after
90	create_port create_port_on	154	configure
91	create_miniport	155	snd rcv mon mon_guard kil reg psub spawn cal
92	become_slave become_public	156	port
93	);	157	);
94		158
		159	our $SELF;
		160
		161	sub _self_die() {
		162	my $msg = $@;
		163	$msg =~ s/\n+$// unless ref $msg;
		164	kil $SELF, die => $msg;
		165	}
		166
95	=item NODE / $NODE	167	=item $thisnode = NODE / $NODE
96		168
97	The C<NODE ()> function and the C<$NODE> variable contain the noderef of	169	The C<NODE> function returns, and the C<$NODE> variable contains, the node
98	the local node. The value is initialised by a call to C<become_public> or	170	ID of the node running in the current process. This value is initialised by
99	C<become_slave>, after which all local port identifiers become invalid.	171	a call to C<configure>.
100		172
		173	=item $nodeid = node_of $port
		174
		175	Extracts and returns the node ID from a port ID or a node ID.
		176
		177	=item configure $profile, key => value...
		178
		179	=item configure key => value...
		180
		181	Before a node can talk to other nodes on the network (i.e. enter
		182	"distributed mode") it has to configure itself - the minimum a node needs
		183	to know is its own name, and optionally it should know the addresses of
		184	some other nodes in the network to discover other nodes.
		185
		186	This function configures a node - it must be called exactly once (or
		187	never) before calling other AnyEvent::MP functions.
		188
		189	=over 4
		190
		191	=item step 1, gathering configuration from profiles
		192
		193	The function first looks up a profile in the aemp configuration (see the
		194	L<aemp> commandline utility). The profile name can be specified via the
		195	named C<profile> parameter or can simply be the first parameter). If it is
		196	missing, then the nodename (F<uname -n>) will be used as profile name.
		197
		198	The profile data is then gathered as follows:
		199
		200	First, all remaining key => value pairs (all of which are conveniently
		201	undocumented at the moment) will be interpreted as configuration
		202	data. Then they will be overwritten by any values specified in the global
		203	default configuration (see the F<aemp> utility), then the chain of
		204	profiles chosen by the profile name (and any C<parent> attributes).
		205
		206	That means that the values specified in the profile have highest priority
		207	and the values specified directly via C<configure> have lowest priority,
		208	and can only be used to specify defaults.
		209
		210	If the profile specifies a node ID, then this will become the node ID of
		211	this process. If not, then the profile name will be used as node ID. The
		212	special node ID of C<anon/> will be replaced by a random node ID.
		213
		214	=item step 2, bind listener sockets
		215
		216	The next step is to look up the binds in the profile, followed by binding
		217	aemp protocol listeners on all binds specified (it is possible and valid
		218	to have no binds, meaning that the node cannot be contacted form the
		219	outside. This means the node cannot talk to other nodes that also have no
		220	binds, but it can still talk to all "normal" nodes).
		221
		222	If the profile does not specify a binds list, then a default of C<*> is
		223	used, meaning the node will bind on a dynamically-assigned port on every
		224	local IP address it finds.
		225
		226	=item step 3, connect to seed nodes
		227
		228	As the last step, the seeds list from the profile is passed to the
		229	L<AnyEvent::MP::Global> module, which will then use it to keep
		230	connectivity with at least one node at any point in time.
		231
		232	=back
		233
		234	Example: become a distributed node using the local node name as profile.
		235	This should be the most common form of invocation for "daemon"-type nodes.
		236
		237	configure
		238
		239	Example: become an anonymous node. This form is often used for commandline
		240	clients.
		241
		242	configure nodeid => "anon/";
		243
		244	Example: configure a node using a profile called seed, which si suitable
		245	for a seed node as it binds on all local addresses on a fixed port (4040,
		246	customary for aemp).
		247
		248	# use the aemp commandline utility
		249	# aemp profile seed nodeid anon/ binds '*:4040'
		250
		251	# then use it
		252	configure profile => "seed";
		253
		254	# or simply use aemp from the shell again:
		255	# aemp run profile seed
		256
		257	# or provide a nicer-to-remember nodeid
		258	# aemp run profile seed nodeid "$(hostname)"
		259
		260	=item $SELF
		261
		262	Contains the current port id while executing C<rcv> callbacks or C<psub>
		263	blocks.
		264
		265	=item *SELF, SELF, %SELF, @SELF...
		266
		267	Due to some quirks in how perl exports variables, it is impossible to
		268	just export C<$SELF>, all the symbols named C<SELF> are exported by this
		269	module, but only C<$SELF> is currently used.
		270
101	=item snd $portid, type => @data	271	=item snd $port, type => @data
102		272
103	=item snd $portid, @msg	273	=item snd $port, @msg
104		274
105	Send the given message to the given port ID, which can identify either	275	Send the given message to the given port, which can identify either a
106	a local or a remote port, and can be either a string or soemthignt hat	276	local or a remote port, and must be a port ID.
107	stringifies a sa port ID (such as a port object :).
108		277
109	While the message can be about anything, it is highly recommended to use a	278	While the message can be almost anything, it is highly recommended to
110	string as first element (a portid, or some word that indicates a request	279	use a string as first element (a port ID, or some word that indicates a
111	type etc.).	280	request type etc.) and to consist if only simple perl values (scalars,
		281	arrays, hashes) - if you think you need to pass an object, think again.
112		282
113	The message data effectively becomes read-only after a call to this	283	The message data logically becomes read-only after a call to this
114	function: modifying any argument is not allowed and can cause many	284	function: modifying any argument (or values referenced by them) is
115	problems.	285	forbidden, as there can be considerable time between the call to C<snd>
		286	and the time the message is actually being serialised - in fact, it might
		287	never be copied as within the same process it is simply handed to the
		288	receiving port.
116		289
117	The type of data you can transfer depends on the transport protocol: when	290	The type of data you can transfer depends on the transport protocol: when
118	JSON is used, then only strings, numbers and arrays and hashes consisting	291	JSON is used, then only strings, numbers and arrays and hashes consisting
119	of those are allowed (no objects). When Storable is used, then anything	292	of those are allowed (no objects). When Storable is used, then anything
120	that Storable can serialise and deserialise is allowed, and for the local	293	that Storable can serialise and deserialise is allowed, and for the local
121	node, anything can be passed.	294	node, anything can be passed. Best rely only on the common denominator of
		295	these.
122		296
123	=item $local_port = create_port	297	=item $local_port = port
124		298
125	Create a new local port object. See the next section for allowed methods.	299	Create a new local port object and returns its port ID. Initially it has
		300	no callbacks set and will throw an error when it receives messages.
126		301
127	=cut	302	=item $local_port = port { my @msg = @_ }
128		303
129	sub create_port {	304	Creates a new local port, and returns its ID. Semantically the same as
130	my $id = "$AnyEvent::MP::Base::UNIQ." . ++$AnyEvent::MP::Base::ID;	305	creating a port and calling C<rcv $port, $callback> on it.
131		306
132	my $self = bless {	307	The block will be called for every message received on the port, with the
133	id => "$NODE#$id",	308	global variable C<$SELF> set to the port ID. Runtime errors will cause the
134	names => [$id],	309	port to be C<kil>ed. The message will be passed as-is, no extra argument
135	}, "AnyEvent::MP::Port";	310	(i.e. no port ID) will be passed to the callback.
136		311
137	$AnyEvent::MP::Base::PORT{$id} = sub {	312	If you want to stop/destroy the port, simply C<kil> it:
138	unshift @_, $self;
139		313
140	for (@{ $self->{rc0}{$_[1]} }) {	314	my $port = port {
141	$_ && &{$_->[0]}	315	my @msg = @_;
142	&& undef $_;	316	...
		317	kil $SELF;
		318	};
		319
		320	=cut
		321
		322	sub rcv($@);
		323
		324	sub _kilme {
		325	die "received message on port without callback";
		326	}
		327
		328	sub port(;&) {
		329	my $id = "$UNIQ." . $ID++;
		330	my $port = "$NODE#$id";
		331
		332	rcv $port, shift \|\| \&_kilme;
		333
		334	$port
		335	}
		336
		337	=item rcv $local_port, $callback->(@msg)
		338
		339	Replaces the default callback on the specified port. There is no way to
		340	remove the default callback: use C<sub { }> to disable it, or better
		341	C<kil> the port when it is no longer needed.
		342
		343	The global C<$SELF> (exported by this module) contains C<$port> while
		344	executing the callback. Runtime errors during callback execution will
		345	result in the port being C<kil>ed.
		346
		347	The default callback received all messages not matched by a more specific
		348	C<tag> match.
		349
		350	=item rcv $local_port, tag => $callback->(@msg_without_tag), ...
		351
		352	Register (or replace) callbacks to be called on messages starting with the
		353	given tag on the given port (and return the port), or unregister it (when
		354	C<$callback> is C<$undef> or missing). There can only be one callback
		355	registered for each tag.
		356
		357	The original message will be passed to the callback, after the first
		358	element (the tag) has been removed. The callback will use the same
		359	environment as the default callback (see above).
		360
		361	Example: create a port and bind receivers on it in one go.
		362
		363	my $port = rcv port,
		364	msg1 => sub { ... },
		365	msg2 => sub { ... },
		366	;
		367
		368	Example: create a port, bind receivers and send it in a message elsewhere
		369	in one go:
		370
		371	snd $otherport, reply =>
		372	rcv port,
		373	msg1 => sub { ... },
		374	...
		375	;
		376
		377	Example: temporarily register a rcv callback for a tag matching some port
		378	(e.g. for a rpc reply) and unregister it after a message was received.
		379
		380	rcv $port, $otherport => sub {
		381	my @reply = @_;
		382
		383	rcv $SELF, $otherport;
		384	};
		385
		386	=cut
		387
		388	sub rcv($@) {
		389	my $port = shift;
		390	my ($nodeid, $portid) = split /#/, $port, 2;
		391
		392	$NODE{$nodeid} == $NODE{""}
		393	or Carp::croak "$port: rcv can only be called on local ports, caught";
		394
		395	while (@_) {
		396	if (ref $_[0]) {
		397	if (my $self = $PORT_DATA{$portid}) {
		398	"AnyEvent::MP::Port" eq ref $self
		399	or Carp::croak "$port: rcv can only be called on message matching ports, caught";
		400
		401	$self->[2] = shift;
		402	} else {
		403	my $cb = shift;
		404	$PORT{$portid} = sub {
		405	local $SELF = $port;
		406	eval { &$cb }; _self_die if $@;
		407	};
		408	}
		409	} elsif (defined $_[0]) {
		410	my $self = $PORT_DATA{$portid} \|\|= do {
		411	my $self = bless [$PORT{$port} \|\| sub { }, { }, $port], "AnyEvent::MP::Port";
		412
		413	$PORT{$portid} = sub {
		414	local $SELF = $port;
		415
		416	if (my $cb = $self->[1]{$_[0]}) {
		417	shift;
		418	eval { &$cb }; _self_die if $@;
		419	} else {
		420	&{ $self->[0] };
		421	}
		422	};
		423
		424	$self
		425	};
		426
		427	"AnyEvent::MP::Port" eq ref $self
		428	or Carp::croak "$port: rcv can only be called on message matching ports, caught";
		429
		430	my ($tag, $cb) = splice @_, 0, 2;
		431
		432	if (defined $cb) {
		433	$self->[1]{$tag} = $cb;
		434	} else {
		435	delete $self->[1]{$tag};
		436	}
143	}	437	}
		438	}
144		439
145	for (@{ $self->{rcv}{$_[1]} }) {	440	$port
146	$_ && [@_[1 .. @{$_->[1]}]] ~~ $_->[1]	441	}
147	&& &{$_->[0]}	442
148	&& undef $_;	443	=item $closure = psub { BLOCK }
		444
		445	Remembers C<$SELF> and creates a closure out of the BLOCK. When the
		446	closure is executed, sets up the environment in the same way as in C<rcv>
		447	callbacks, i.e. runtime errors will cause the port to get C<kil>ed.
		448
		449	This is useful when you register callbacks from C<rcv> callbacks:
		450
		451	rcv delayed_reply => sub {
		452	my ($delay, @reply) = @_;
		453	my $timer = AE::timer $delay, 0, psub {
		454	snd @reply, $SELF;
		455	};
		456	};
		457
		458	=cut
		459
		460	sub psub(&) {
		461	my $cb = shift;
		462
		463	my $port = $SELF
		464	or Carp::croak "psub can only be called from within rcv or psub callbacks, not";
		465
		466	sub {
		467	local $SELF = $port;
		468
		469	if (wantarray) {
		470	my @res = eval { &$cb };
		471	_self_die if $@;
		472	@res
		473	} else {
		474	my $res = eval { &$cb };
		475	_self_die if $@;
		476	$res
149	}	477	}
		478	}
		479	}
150		480
151	for (@{ $self->{any} }) {	481	=item $guard = mon $port, $cb->(@reason) # call $cb when $port dies
152	$_ && [@_[0 .. $#{$_->[1]}]] ~~ $_->[1]	482
153	&& &{$_->[0]}	483	=item $guard = mon $port, $rcvport # kill $rcvport when $port dies
154	&& undef $_;	484
		485	=item $guard = mon $port # kill $SELF when $port dies
		486
		487	=item $guard = mon $port, $rcvport, @msg # send a message when $port dies
		488
		489	Monitor the given port and do something when the port is killed or
		490	messages to it were lost, and optionally return a guard that can be used
		491	to stop monitoring again.
		492
		493	In the first form (callback), the callback is simply called with any
		494	number of C<@reason> elements (no @reason means that the port was deleted
		495	"normally"). Note also that I<< the callback B<must> never die >>, so use
		496	C<eval> if unsure.
		497
		498	In the second form (another port given), the other port (C<$rcvport>)
		499	will be C<kil>'ed with C<@reason>, if a @reason was specified, i.e. on
		500	"normal" kils nothing happens, while under all other conditions, the other
		501	port is killed with the same reason.
		502
		503	The third form (kill self) is the same as the second form, except that
		504	C<$rvport> defaults to C<$SELF>.
		505
		506	In the last form (message), a message of the form C<@msg, @reason> will be
		507	C<snd>.
		508
		509	Monitoring-actions are one-shot: once messages are lost (and a monitoring
		510	alert was raised), they are removed and will not trigger again.
		511
		512	As a rule of thumb, monitoring requests should always monitor a port from
		513	a local port (or callback). The reason is that kill messages might get
		514	lost, just like any other message. Another less obvious reason is that
		515	even monitoring requests can get lost (for example, when the connection
		516	to the other node goes down permanently). When monitoring a port locally
		517	these problems do not exist.
		518
		519	C<mon> effectively guarantees that, in the absence of hardware failures,
		520	after starting the monitor, either all messages sent to the port will
		521	arrive, or the monitoring action will be invoked after possible message
		522	loss has been detected. No messages will be lost "in between" (after
		523	the first lost message no further messages will be received by the
		524	port). After the monitoring action was invoked, further messages might get
		525	delivered again.
		526
		527	Inter-host-connection timeouts and monitoring depend on the transport
		528	used. The only transport currently implemented is TCP, and AnyEvent::MP
		529	relies on TCP to detect node-downs (this can take 10-15 minutes on a
		530	non-idle connection, and usually around two hours for idle conenctions).
		531
		532	This means that monitoring is good for program errors and cleaning up
		533	stuff eventually, but they are no replacement for a timeout when you need
		534	to ensure some maximum latency.
		535
		536	Example: call a given callback when C<$port> is killed.
		537
		538	mon $port, sub { warn "port died because of <@_>\n" };
		539
		540	Example: kill ourselves when C<$port> is killed abnormally.
		541
		542	mon $port;
		543
		544	Example: send us a restart message when another C<$port> is killed.
		545
		546	mon $port, $self => "restart";
		547
		548	=cut
		549
		550	sub mon {
		551	my ($nodeid, $port) = split /#/, shift, 2;
		552
		553	my $node = $NODE{$nodeid} \|\| add_node $nodeid;
		554
		555	my $cb = @_ ? shift : $SELF \|\| Carp::croak 'mon: called with one argument only, but $SELF not set,';
		556
		557	unless (ref $cb) {
		558	if (@_) {
		559	# send a kill info message
		560	my (@msg) = ($cb, @_);
		561	$cb = sub { snd @msg, @_ };
		562	} else {
		563	# simply kill other port
		564	my $port = $cb;
		565	$cb = sub { kil $port, @_ if @_ };
155	}	566	}
		567	}
		568
		569	$node->monitor ($port, $cb);
		570
		571	defined wantarray
		572	and AnyEvent::Util::guard { $node->unmonitor ($port, $cb) }
		573	}
		574
		575	=item $guard = mon_guard $port, $ref, $ref...
		576
		577	Monitors the given C<$port> and keeps the passed references. When the port
		578	is killed, the references will be freed.
		579
		580	Optionally returns a guard that will stop the monitoring.
		581
		582	This function is useful when you create e.g. timers or other watchers and
		583	want to free them when the port gets killed (note the use of C<psub>):
		584
		585	$port->rcv (start => sub {
		586	my $timer; $timer = mon_guard $port, AE::timer 1, 1, psub {
		587	undef $timer if 0.9 < rand;
		588	});
		589	});
		590
		591	=cut
		592
		593	sub mon_guard {
		594	my ($port, @refs) = @_;
		595
		596	#TODO: mon-less form?
		597
		598	mon $port, sub { 0 && @refs }
		599	}
		600
		601	=item kil $port[, @reason]
		602
		603	Kill the specified port with the given C<@reason>.
		604
		605	If no C<@reason> is specified, then the port is killed "normally" (ports
		606	monitoring other ports will not necessarily die because a port dies
		607	"normally").
		608
		609	Otherwise, linked ports get killed with the same reason (second form of
		610	C<mon>, see above).
		611
		612	Runtime errors while evaluating C<rcv> callbacks or inside C<psub> blocks
		613	will be reported as reason C<< die => $@ >>.
		614
		615	Transport/communication errors are reported as C<< transport_error =>
		616	$message >>.
		617
		618	=cut
		619
		620	=item $port = spawn $node, $initfunc[, @initdata]
		621
		622	Creates a port on the node C<$node> (which can also be a port ID, in which
		623	case it's the node where that port resides).
		624
		625	The port ID of the newly created port is returned immediately, and it is
		626	possible to immediately start sending messages or to monitor the port.
		627
		628	After the port has been created, the init function is called on the remote
		629	node, in the same context as a C<rcv> callback. This function must be a
		630	fully-qualified function name (e.g. C<MyApp::Chat::Server::init>). To
		631	specify a function in the main program, use C<::name>.
		632
		633	If the function doesn't exist, then the node tries to C<require>
		634	the package, then the package above the package and so on (e.g.
		635	C<MyApp::Chat::Server>, C<MyApp::Chat>, C<MyApp>) until the function
		636	exists or it runs out of package names.
		637
		638	The init function is then called with the newly-created port as context
		639	object (C<$SELF>) and the C<@initdata> values as arguments. It I<must>
		640	call one of the C<rcv> functions to set callbacks on C<$SELF>, otherwise
		641	the port might not get created.
		642
		643	A common idiom is to pass a local port, immediately monitor the spawned
		644	port, and in the remote init function, immediately monitor the passed
		645	local port. This two-way monitoring ensures that both ports get cleaned up
		646	when there is a problem.
		647
		648	C<spawn> guarantees that the C<$initfunc> has no visible effects on the
		649	caller before C<spawn> returns (by delaying invocation when spawn is
		650	called for the local node).
		651
		652	Example: spawn a chat server port on C<$othernode>.
		653
		654	# this node, executed from within a port context:
		655	my $server = spawn $othernode, "MyApp::Chat::Server::connect", $SELF;
		656	mon $server;
		657
		658	# init function on C<$othernode>
		659	sub connect {
		660	my ($srcport) = @_;
		661
		662	mon $srcport;
		663
		664	rcv $SELF, sub {
		665	...
		666	};
		667	}
		668
		669	=cut
		670
		671	sub _spawn {
		672	my $port = shift;
		673	my $init = shift;
		674
		675	# rcv will create the actual port
		676	local $SELF = "$NODE#$port";
		677	eval {
		678	&{ load_func $init }
156	};	679	};
157		680	_self_die if $@;
158	$self
159	}	681	}
160		682
161	=item $portid = miniport { my @msg = @_; $finished }	683	sub spawn(@) {
		684	my ($nodeid, undef) = split /#/, shift, 2;
162		685
163	Creates a "mini port", that is, a very lightweight port without any	686	my $id = "$RUNIQ." . $ID++;
164	pattern matching behind it, and returns its ID.
165		687
166	The block will be called for every message received on the port. When the	688	$_[0] =~ /::/
167	callback returns a true value its job is considered "done" and the port	689	or Carp::croak "spawn init function must be a fully-qualified name, caught";
168	will be destroyed. Otherwise it will stay alive.
169		690
170	The message will be passed as-is, no extra argument (ie.. no port id) will	691	snd_to_func $nodeid, "AnyEvent::MP::_spawn" => $id, @_;
171	be passed to the callback.
172		692
173	If you need the local port id in the callback, this works nicely:	693	"$nodeid#$id"
		694	}
174		695
175	my $port; $port = miniport {	696	=item after $timeout, @msg
176	snd $otherport, reply => $port;	697
		698	=item after $timeout, $callback
		699
		700	Either sends the given message, or call the given callback, after the
		701	specified number of seconds.
		702
		703	This is simply a utility function that comes in handy at times - the
		704	AnyEvent::MP author is not convinced of the wisdom of having it, though,
		705	so it may go away in the future.
		706
		707	=cut
		708
		709	sub after($@) {
		710	my ($timeout, @action) = @_;
		711
		712	my $t; $t = AE::timer $timeout, 0, sub {
		713	undef $t;
		714	ref $action[0]
		715	? $action[0]()
		716	: snd @action;
177	};	717	};
		718	}
178		719
179	=cut	720	=item cal $port, @msg, $callback[, $timeout]
180		721
181	sub miniport(&) {	722	A simple form of RPC - sends a message to the given C<$port> with the
		723	given contents (C<@msg>), but adds a reply port to the message.
		724
		725	The reply port is created temporarily just for the purpose of receiving
		726	the reply, and will be C<kil>ed when no longer needed.
		727
		728	A reply message sent to the port is passed to the C<$callback> as-is.
		729
		730	If an optional time-out (in seconds) is given and it is not C<undef>,
		731	then the callback will be called without any arguments after the time-out
		732	elapsed and the port is C<kil>ed.
		733
		734	If no time-out is given, then the local port will monitor the remote port
		735	instead, so it eventually gets cleaned-up.
		736
		737	Currently this function returns the temporary port, but this "feature"
		738	might go in future versions unless you can make a convincing case that
		739	this is indeed useful for something.
		740
		741	=cut
		742
		743	sub cal(@) {
		744	my $timeout = ref $_[-1] ? undef : pop;
182	my $cb = shift;	745	my $cb = pop;
183	my $id = "$AnyEvent::MP::Base::UNIQ." . ++$AnyEvent::MP::Base::ID;
184		746
185	$AnyEvent::MP::Base::PORT{$id} = sub {	747	my $port = port {
		748	undef $timeout;
		749	kil $SELF;
186	&$cb	750	&$cb;
187	and delete $AnyEvent::MP::Base::PORT{$id};
188	};	751	};
189		752
190	"$NODE#$id"	753	if (defined $timeout) {
191	}	754	$timeout = AE::timer $timeout, 0, sub {
		755	undef $timeout;
		756	kil $port;
		757	$cb->();
		758	};
		759	} else {
		760	mon $_[0], sub {
		761	kil $port;
		762	$cb->();
		763	};
		764	}
192		765
193	package AnyEvent::MP::Port;	766	push @_, $port;
		767	&snd;
		768
		769	$port
		770	}
194		771
195	=back	772	=back
196		773
197	=head1 METHODS FOR PORT OBJECTS	774	=head1 AnyEvent::MP vs. Distributed Erlang
		775
		776	AnyEvent::MP got lots of its ideas from distributed Erlang (Erlang node
		777	== aemp node, Erlang process == aemp port), so many of the documents and
		778	programming techniques employed by Erlang apply to AnyEvent::MP. Here is a
		779	sample:
		780
		781	http://www.Erlang.se/doc/programming_rules.shtml
		782	http://Erlang.org/doc/getting_started/part_frame.html # chapters 3 and 4
		783	http://Erlang.org/download/Erlang-book-part1.pdf # chapters 5 and 6
		784	http://Erlang.org/download/armstrong_thesis_2003.pdf # chapters 4 and 5
		785
		786	Despite the similarities, there are also some important differences:
198		787
199	=over 4	788	=over 4
200		789
201	=item "$port"	790	=item * Node IDs are arbitrary strings in AEMP.
202		791
203	A port object stringifies to its port ID, so can be used directly for	792	Erlang relies on special naming and DNS to work everywhere in the same
204	C<snd> operations.	793	way. AEMP relies on each node somehow knowing its own address(es) (e.g. by
		794	configuration or DNS), but will otherwise discover other odes itself.
205		795
206	=cut	796	=item * Erlang has a "remote ports are like local ports" philosophy, AEMP
		797	uses "local ports are like remote ports".
207		798
208	use overload	799	The failure modes for local ports are quite different (runtime errors
209	'""' => sub { $_[0]{id} },	800	only) then for remote ports - when a local port dies, you I<know> it dies,
210	fallback => 1;	801	when a connection to another node dies, you know nothing about the other
		802	port.
211		803
212	=item $port->rcv (type => $callback->($port, @msg))	804	Erlang pretends remote ports are as reliable as local ports, even when
		805	they are not.
213		806
214	=item $port->rcv ($smartmatch => $callback->($port, @msg))	807	AEMP encourages a "treat remote ports differently" philosophy, with local
		808	ports being the special case/exception, where transport errors cannot
		809	occur.
215		810
216	=item $port->rcv ([$smartmatch...] => $callback->($port, @msg))	811	=item * Erlang uses processes and a mailbox, AEMP does not queue.
217		812
218	Register a callback on the given port.	813	Erlang uses processes that selectively receive messages, and therefore
		814	needs a queue. AEMP is event based, queuing messages would serve no
		815	useful purpose. For the same reason the pattern-matching abilities of
		816	AnyEvent::MP are more limited, as there is little need to be able to
		817	filter messages without dequeuing them.
219		818
220	The callback has to return a true value when its work is done, after	819	(But see L<Coro::MP> for a more Erlang-like process model on top of AEMP).
221	which is will be removed, or a false value in which case it will stay
222	registered.
223		820
224	If the match is an array reference, then it will be matched against the	821	=item * Erlang sends are synchronous, AEMP sends are asynchronous.
225	first elements of the message, otherwise only the first element is being
226	matched.
227		822
228	Any element in the match that is specified as C<_any_> (a function	823	Sending messages in Erlang is synchronous and blocks the process (and
229	exported by this module) matches any single element of the message.	824	so does not need a queue that can overflow). AEMP sends are immediate,
		825	connection establishment is handled in the background.
230		826
231	While not required, it is highly recommended that the first matching	827	=item * Erlang suffers from silent message loss, AEMP does not.
232	element is a string identifying the message. The one-string-only match is
233	also the most efficient match (by far).
234		828
235	=cut	829	Erlang makes few guarantees on messages delivery - messages can get lost
		830	without any of the processes realising it (i.e. you send messages a, b,
		831	and c, and the other side only receives messages a and c).
236		832
237	sub rcv($@) {	833	AEMP guarantees correct ordering, and the guarantee that after one message
238	my ($self, $match, $cb) = @_;	834	is lost, all following ones sent to the same port are lost as well, until
		835	monitoring raises an error, so there are no silent "holes" in the message
		836	sequence.
239		837
240	if (!ref $match) {	838	=item * Erlang can send messages to the wrong port, AEMP does not.
241	push @{ $self->{rc0}{$match} }, [$cb];
242	} elsif (("ARRAY" eq ref $match && !ref $match->[0])) {
243	my ($type, @match) = @$match;
244	@match
245	? push @{ $self->{rcv}{$match->[0]} }, [$cb, \@match]
246	: push @{ $self->{rc0}{$match->[0]} }, [$cb];
247	} else {
248	push @{ $self->{any} }, [$cb, $match];
249	}
250	}
251		839
252	=item $port->register ($name)	840	In Erlang it is quite likely that a node that restarts reuses a process ID
		841	known to other nodes for a completely different process, causing messages
		842	destined for that process to end up in an unrelated process.
253		843
254	Registers the given port under the well known name C<$name>. If the name	844	AEMP never reuses port IDs, so old messages or old port IDs floating
255	already exists it is replaced.	845	around in the network will not be sent to an unrelated port.
256		846
257	A port can only be registered under one well known name.	847	=item * Erlang uses unprotected connections, AEMP uses secure
		848	authentication and can use TLS.
258		849
259	=cut	850	AEMP can use a proven protocol - TLS - to protect connections and
		851	securely authenticate nodes.
260		852
261	sub register {	853	=item * The AEMP protocol is optimised for both text-based and binary
262	my ($self, $name) = @_;	854	communications.
263		855
264	$self->{wkname} = $name;	856	The AEMP protocol, unlike the Erlang protocol, supports both programming
265	$AnyEvent::MP::Base::WKP{$name} = "$self";	857	language independent text-only protocols (good for debugging) and binary,
266	}	858	language-specific serialisers (e.g. Storable). By default, unless TLS is
		859	used, the protocol is actually completely text-based.
267		860
268	=item $port->destroy	861	It has also been carefully designed to be implementable in other languages
		862	with a minimum of work while gracefully degrading functionality to make the
		863	protocol simple.
269		864
270	Explicitly destroy/remove/nuke/vaporise the port.	865	=item * AEMP has more flexible monitoring options than Erlang.
271		866
272	Ports are normally kept alive by there mere existance alone, and need to	867	In Erlang, you can chose to receive I<all> exit signals as messages
273	be destroyed explicitly.	868	or I<none>, there is no in-between, so monitoring single processes is
		869	difficult to implement. Monitoring in AEMP is more flexible than in
		870	Erlang, as one can choose between automatic kill, exit message or callback
		871	on a per-process basis.
274		872
275	=cut	873	=item * Erlang tries to hide remote/local connections, AEMP does not.
276		874
277	sub destroy {	875	Monitoring in Erlang is not an indicator of process death/crashes, in the
278	my ($self) = @_;	876	same way as linking is (except linking is unreliable in Erlang).
279		877
280	delete $AnyEvent::MP::Base::WKP{ $self->{wkname} };	878	In AEMP, you don't "look up" registered port names or send to named ports
		879	that might or might not be persistent. Instead, you normally spawn a port
		880	on the remote node. The init function monitors you, and you monitor the
		881	remote port. Since both monitors are local to the node, they are much more
		882	reliable (no need for C<spawn_link>).
281		883
282	delete $AnyEvent::MP::Base::PORT{$_}	884	This also saves round-trips and avoids sending messages to the wrong port
283	for @{ $self->{names} };	885	(hard to do in Erlang).
284	}
285		886
286	=back	887	=back
287		888
288	=head1 FUNCTIONS FOR NODES	889	=head1 RATIONALE
289		890
290	=over 4	891	=over 4
291		892
292	=item mon $noderef, $callback->($noderef, $status, $)	893	=item Why strings for port and node IDs, why not objects?
293		894
294	Monitors the given noderef.	895	We considered "objects", but found that the actual number of methods
		896	that can be called are quite low. Since port and node IDs travel over
		897	the network frequently, the serialising/deserialising would add lots of
		898	overhead, as well as having to keep a proxy object everywhere.
295		899
296	=item become_public endpoint...	900	Strings can easily be printed, easily serialised etc. and need no special
		901	procedures to be "valid".
297		902
298	Tells the node to become a public node, i.e. reachable from other nodes.	903	And as a result, a miniport consists of a single closure stored in a
		904	global hash - it can't become much cheaper.
299		905
300	If no arguments are given, or the first argument is C<undef>, then	906	=item Why favour JSON, why not a real serialising format such as Storable?
301	AnyEvent::MP tries to bind on port C<4040> on all IP addresses that the
302	local nodename resolves to.
303		907
304	Otherwise the first argument must be an array-reference with transport	908	In fact, any AnyEvent::MP node will happily accept Storable as framing
305	endpoints ("ip:port", "hostname:port") or port numbers (in which case the	909	format, but currently there is no way to make a node use Storable by
306	local nodename is used as hostname). The endpoints are all resolved and	910	default (although all nodes will accept it).
307	will become the node reference.
308		911
309	=cut	912	The default framing protocol is JSON because a) JSON::XS is many times
		913	faster for small messages and b) most importantly, after years of
		914	experience we found that object serialisation is causing more problems
		915	than it solves: Just like function calls, objects simply do not travel
		916	easily over the network, mostly because they will always be a copy, so you
		917	always have to re-think your design.
		918
		919	Keeping your messages simple, concentrating on data structures rather than
		920	objects, will keep your messages clean, tidy and efficient.
310		921
311	=back	922	=back
312		923
313	=head1 NODE MESSAGES
314
315	Nodes understand the following messages sent to them. Many of them take
316	arguments called C<@reply>, which will simply be used to compose a reply
317	message - C<$reply[0]> is the port to reply to, C<$reply[1]> the type and
318	the remaining arguments are simply the message data.
319
320	=over 4
321
322	=cut
323
324	=item wkp => $name, @reply
325
326	Replies with the port ID of the specified well-known port, or C<undef>.
327
328	=item devnull => ...
329
330	Generic data sink/CPU heat conversion.
331
332	=item relay => $port, @msg
333
334	Simply forwards the message to the given port.
335
336	=item eval => $string[ @reply]
337
338	Evaluates the given string. If C<@reply> is given, then a message of the
339	form C<@reply, $@, @evalres> is sent.
340
341	Example: crash another node.
342
343	snd $othernode, eval => "exit";
344
345	=item time => @reply
346
347	Replies the the current node time to C<@reply>.
348
349	Example: tell the current node to send the current time to C<$myport> in a
350	C<timereply> message.
351
352	snd $NODE, time => $myport, timereply => 1, 2;
353	# => snd $myport, timereply => 1, 2, <time>
354
355	=back
356
357	=head1 SEE ALSO	924	=head1 SEE ALSO
		925
		926	L<AnyEvent::MP::Intro> - a gentle introduction.
		927
		928	L<AnyEvent::MP::Kernel> - more, lower-level, stuff.
		929
		930	L<AnyEvent::MP::Global> - network maintainance and port groups, to find
		931	your applications.
		932
		933	L<AnyEvent::MP::LogCatcher> - simple service to display log messages from
		934	all nodes.
358		935
359	L<AnyEvent>.	936	L<AnyEvent>.
360		937
361	=head1 AUTHOR	938	=head1 AUTHOR
362		939

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent-MP/MP.pm (file contents): Revision 1.15 by root, Sun Aug 2 19:25:27 2009 UTC vs. Revision 1.87 by root, Fri Sep 11 02:32:23 2009 UTC

Diff Legend

Comparing AnyEvent-MP/MP.pm (file contents):
Revision 1.15 by root, Sun Aug 2 19:25:27 2009 UTC vs.
Revision 1.87 by root, Fri Sep 11 02:32:23 2009 UTC