[ViewVC] Diff of: cvs/AnyEvent-MPV/MPV.pm

Comparing AnyEvent-MPV/MPV.pm (file contents):
Revision 1.10 by root, Mon Mar 20 12:31:03 2023 UTC vs.
Revision 1.18 by root, Thu Mar 23 19:22:48 2023 UTC

…		…
3	AnyEvent::MPV - remote control mpv (https://mpv.io)	3	AnyEvent::MPV - remote control mpv (https://mpv.io)
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	use AnyEvent::MPV;	7	use AnyEvent::MPV;
		8
		9	my $videofile = "path/to/file.mkv";
		10	use AnyEvent;
		11	my $mpv = AnyEvent::MPV->new (trace => 1);
		12	$mpv->start ("--idle=yes");
		13	$mpv->cmd (loadfile => $mpv->escape_binary ($videofile));
		14	my $quit = AE::cv;
		15	$mpv->register_event (end_file => $quit);
		16	$quit->recv;
		17
8		18
9	=head1 DESCRIPTION	19	=head1 DESCRIPTION
10		20
11	This module allows you to remote control F<mpv> (a video player). It also	21	This module allows you to remote control F<mpv> (a video player). It also
12	is an L<AnyEvent> user, you need to make sure that you use and run a	22	is an L<AnyEvent> user, you need to make sure that you use and run a
…		…
50	Here is a very simple client:	60	Here is a very simple client:
51		61
52	use AnyEvent;	62	use AnyEvent;
53	use AnyEvent::MPV;	63	use AnyEvent::MPV;
54		64
55	my $videofile = "./xyzzy.mp4";	65	my $videofile = "./xyzzy.mkv";
56		66
57	my $mpv = AnyEvent::MPV->new (trace => 1);	67	my $mpv = AnyEvent::MPV->new (trace => 1);
58		68
59	$mpv->start ("--", $videofile);	69	$mpv->start ("--", $videofile);
60		70
…		…
85	shell command), so let us load the file at runtime:	95	shell command), so let us load the file at runtime:
86		96
87	use AnyEvent;	97	use AnyEvent;
88	use AnyEvent::MPV;	98	use AnyEvent::MPV;
89		99
90	my $videofile = "./xyzzy.mp4";	100	my $videofile = "./xyzzy.mkv";
91		101
92	my $mpv = AnyEvent::MPV->new (	102	my $mpv = AnyEvent::MPV->new (
93	trace => 1,	103	trace => 1,
94	args => ["--pause", "--idle=yes"],	104	args => ["--pause", "--idle=yes"],
95	);	105	);
…		…
140	receiving events (using a somewhat embellished example):	150	receiving events (using a somewhat embellished example):
141		151
142	use AnyEvent;	152	use AnyEvent;
143	use AnyEvent::MPV;	153	use AnyEvent::MPV;
144		154
145	my $videofile = "xyzzy.mp4";	155	my $videofile = "xyzzy.mkv";
146		156
147	my $quit = AE::cv;	157	my $quit = AE::cv;
148		158
149	my $mpv = AnyEvent::MPV->new (	159	my $mpv = AnyEvent::MPV->new (
150	trace => 1,	160	trace => 1,
151	args => ["--pause", "--idle=yes"],	161	args => ["--pause", "--idle=yes"],
152	on_event => sub {
153	my ($mpv, $event, $data) = @_;
154
155	if ($event eq "start-file") {
156	$mpv->cmd ("set", "pause", "no");
157	} elsif ($event eq "end-file") {
158	print "end-file<$data->{reason}>\n";
159	$quit->send;
160	}
161	},
162	);	162	);
163		163
164	$mpv->start;	164	$mpv->start;
		165
		166	$mpv->register_event (start_file => sub {
		167	$mpv->cmd ("set", "pause", "no");
		168	});
		169
		170	$mpv->register_event (end_file => sub {
		171	my ($mpv, $event, $data) = @_;
		172
		173	print "end-file<$data->{reason}>\n";
		174	$quit->send;
		175	});
		176
165	$mpv->cmd (loadfile => $mpv->escape_binary ($videofile));	177	$mpv->cmd (loadfile => $mpv->escape_binary ($videofile));
166		178
167	$quit->recv;	179	$quit->recv;
168		180
169	This example uses a global condvar C<$quit> to wait for the file to finish	181	This example uses a global condvar C<$quit> to wait for the file to finish
170	playing. Also, most of the logic is now in an C<on_event> callback, which	182	playing. Also, most of the logic is now implement in event handlers.
171	receives an event name and the actual event object.
172		183
173	The two events we handle are C<start-file>, which is emitted by F<mpv>	184	The two events handlers we register are C<start-file>, which is emitted by
174	once it has loaded a new file, and C<end-file>, which signals the end	185	F<mpv> once it has loaded a new file, and C<end-file>, which signals the
175	of a file.	186	end of a file (underscores are internally replaced by minus signs, so you
		187	cna speicfy event names with either).
176		188
177	In the former event, we again set the C<pause> property to C<no> so the	189	In the C<start-file> event, we again set the C<pause> property to C<no>
178	movie starts playing. For the latter event, we tell the main program to	190	so the movie starts playing. For the C<end-file> event, we tell the main
179	quit by invoking C<$quit>.	191	program to quit by invoking C<$quit>.
180		192
181	This should conclude the basics of operation. There are a few more	193	This should conclude the basics of operation. There are a few more
182	examples later in the documentation.	194	examples later in the documentation.
183		195
184	=head2 ENCODING CONVENTIONS	196	=head2 ENCODING CONVENTIONS
185		197
186	As a rule of thumb, all data you pass to this module to be sent to F<mpv>	198	As a rule of thumb, all data you pass to this module to be sent to F<mpv>
187	is expected to be in unicode. To pass something that isn't, you need to	199	is expected to be in unicode. To pass something that isn't, you need to
188	escape it using C<escape_binary>.	200	escape it using C<escape_binary>.
189		201
190	Data received from C<$mpv>, however, is I<not> decoded to unicode, as data	202	Data received from F<mpv>, however, is I<not> decoded to unicode, as data
191	returned by F<mpv> is not generally encoded in unicode, and the encoding	203	returned by F<mpv> is not generally encoded in unicode, and the encoding
192	is usually unspecified. So if you receive data and expect it to be in	204	is usually unspecified. So if you receive data and expect it to be in
193	unicode, you need to first decode it from UTF-8, but note that this might	205	unicode, you need to first decode it from UTF-8, but note that this might
194	fail. This is not a limitation of this module - F<mpv> simply does not	206	fail. This is not a limitation of this module - F<mpv> simply does not
195	specify nor guarantee a specific encoding, or any encoding at all, in its	207	specify nor guarantee a specific encoding, or any encoding at all, in its
…		…
209	use Scalar::Util ();	221	use Scalar::Util ();
210		222
211	use AnyEvent ();	223	use AnyEvent ();
212	use AnyEvent::Util ();	224	use AnyEvent::Util ();
213		225
214	our $VERSION = '0.2';	226	our $VERSION = '1.01';
215		227
216	sub OBSID() { 0x10000000000000 } # 2**52	228	sub OBSID() { 0x10000000000000 } # 2**52
217		229
218	our $JSON = eval { require JSON::XS; JSON::XS:: }	230	our $JSON = eval { require JSON::XS; JSON::XS:: }
219	\|\| do { require JSON::PP; JSON::PP:: };	231	\|\| do { require JSON::PP; JSON::PP:: };
220		232
221	our $JSON_CODER =	233	our $JSON_ENCODER = $JSON->new->utf8;
		234	our $JSON_DECODER = $JSON->new->latin1;
222		235
223	our $mpv_path; # last mpv path used	236	our $mpv_path; # last mpv path used
224	our $mpv_optionlist; # output of mpv --list-options	237	our $mpv_optionlist; # output of mpv --list-options
225		238
226	=item $mpv = AnyEvent::MPV->new (key => value...)	239	=item $mpv = AnyEvent::MPV->new (key => value...)
…		…
352		365
353	sub start {	366	sub start {
354	my ($self, @extra_args) = @_;	367	my ($self, @extra_args) = @_;
355		368
356	return 0 if $self->{fh};	369	return 0 if $self->{fh};
357
358	$self->{obscb} = {};
359		370
360	# cache optionlist for same "path"	371	# cache optionlist for same "path"
361	($mpv_path, $mpv_optionlist) = ($self->{mpv}, scalar qx{\Q$self->{mpv}\E --list-options})	372	($mpv_path, $mpv_optionlist) = ($self->{mpv}, scalar qx{\Q$self->{mpv}\E --list-options})
362	if $self->{mpv} ne $mpv_path;	373	if $self->{mpv} ne $mpv_path;
363		374
…		…
400	while ($buf =~ s/^([^\n]+)\n//) {	411	while ($buf =~ s/^([^\n]+)\n//) {
401	$trace->("mpv>" => "$1");	412	$trace->("mpv>" => "$1");
402		413
403	if ("{" eq substr $1, 0, 1) {	414	if ("{" eq substr $1, 0, 1) {
404	eval {	415	eval {
405	my $reply = $JSON->new->latin1->decode ($1);	416	my $reply = $JSON_DECODER->decode ($1);
406		417
407	if (exists $reply->{event}) {	418	if (defined (my $event = delete $reply->{event})) {
408	if (	419	if (
409	$reply->{event} eq "client-message"	420	$event eq "client-message"
410	and $reply->{args}[0] eq "AnyEvent::MPV"	421	and $reply->{args}[0] eq "AnyEvent::MPV"
411	) {	422	) {
412	if ($reply->{args}[1] eq "key") {	423	if ($reply->{args}[1] eq "key") {
413	(my $key = $reply->{args}[2]) =~ s/\\x(..)/chr hex $1/ge;	424	(my $key = $reply->{args}[2]) =~ s/\\x(..)/chr hex $1/ge;
414	$self->on_key ($key);	425	$self->on_key ($key);
415	}	426	}
416	} elsif (	427	} elsif (
417	$reply->{event} eq "property-change"	428	$event eq "property-change"
418	and OBSID <= $reply->{id}	429	and OBSID <= $reply->{id}
419	) {	430	) {
420	if (my $cb = $self->{obscb}{$reply->{id}}) {	431	if (my $cb = $self->{obscb}{$reply->{id}}) {
421	$cb->($self, $reply->{name}, $reply->{data});	432	$cb->($self, $event, $reply->{data});
422	}	433	}
423	} else {	434	} else {
		435	if (my $cbs = $self->{evtcb}{$event}) {
		436	for my $evtid (keys %$cbs) {
		437	my $cb = $cbs->{$evtid}
		438	or next;
		439	$cb->($self, $event, $reply);
		440	}
		441	}
		442
424	$self->on_event (delete $reply->{event}, $reply);	443	$self->on_event ($event, $reply);
425	}	444	}
426	} elsif (exists $reply->{request_id}) {	445	} elsif (exists $reply->{request_id}) {
427	my $cv = delete $self->{cmdcv}{$reply->{request_id}};	446	my $cv = delete $self->{cmdcv}{$reply->{request_id}};
428		447
429	unless ($cv) {	448	unless ($cv) {
…		…
460	$self->{_cmd} = sub {	479	$self->{_cmd} = sub {
461	my $cv = AE::cv;	480	my $cv = AE::cv;
462		481
463	$self->{cmdcv}{++$reqid} = $cv;	482	$self->{cmdcv}{++$reqid} = $cv;
464		483
465	my $cmd = $JSON->new->utf8->encode ({ command => ref $_[0] ? $_[0] : \@_, request_id => $reqid*1 });	484	my $cmd = $JSON_ENCODER->encode ({ command => ref $_[0] ? $_[0] : \@_, request_id => $reqid*1 });
466		485
467	# (un-)apply escape_binary hack	486	# (un-)apply escape_binary hack
468	$cmd =~ s/\xf4\x8e\x97\x9f(..)/sprintf sprintf "\\x%02x", hex $1/ges; # f48e979f == 10e5df in utf-8	487	$cmd =~ s/\xf4\x8e\x97\x9f(..)/sprintf sprintf "\\x%02x", hex $1/ges; # f48e979f == 10e5df in utf-8
469		488
470	$trace->(">mpv" => $cmd);	489	$trace->(">mpv" => $cmd);
…		…
508		527
509	}	528	}
510		529
511	delete $self->{pid};	530	delete $self->{pid};
512	delete $self->{cmdcv};	531	delete $self->{cmdcv};
		532	delete $self->{evtid};
		533	delete $self->{evtcb};
513	delete $self->{obsid};	534	delete $self->{obsid};
514	delete $self->{obscb};	535	delete $self->{obscb};
515	delete $self->{wbuf};	536	delete $self->{wbuf};
516	}	537	}
517		538
…		…
546	For subclassing, see I<SUBCLASSING>, below.	567	For subclassing, see I<SUBCLASSING>, below.
547		568
548	=cut	569	=cut
549		570
550	sub on_event {	571	sub on_event {
551	my ($self, $key) = @_;	572	my ($self, $event, $data) = @_;
552		573
553	$self->{on_event}($self, $key) if $self->{on_event};	574	$self->{on_event}($self, $event, $data) if $self->{on_event};
554	}	575	}
555		576
556	=item $mpv->on_key ($string)	577	=item $mpv->on_key ($string)
557		578
558	Invoked when a key declared by C<< ->bind_key >> is pressed. The default	579	Invoked when a key declared by C<< ->bind_key >> is pressed. The default
…		…
630	&cmd->recv	651	&cmd->recv
631	}	652	}
632		653
633	=item $mpv->bind_key ($INPUT => $string)	654	=item $mpv->bind_key ($INPUT => $string)
634		655
635	This is an extension implement by this module to make it easy to get key events. The way this is implemented	656	This is an extension implement by this module to make it easy to get key
636	is to bind a C<client-message> witha first argument of C<AnyEvent::MPV> and the C<$string> you passed. This C<$string> is then	657	events. The way this is implemented is to bind a C<client-message> witha
637	passed to the C<on_key> handle when the key is proessed, e.g.:	658	first argument of C<AnyEvent::MPV> and the C<$string> you passed. This
		659	C<$string> is then passed to the C<on_key> handle when the key is
		660	proessed, e.g.:
638		661
639	my $mpv = AnyEvent::MPV->new (	662	my $mpv = AnyEvent::MPV->new (
640	on_key => sub {	663	on_key => sub {
641	my ($mpv, $key) = @_;	664	my ($mpv, $key) = @_;
642		665
…		…
646	},	669	},
647	);	670	);
648		671
649	$mpv_>bind_key (ESC => "letmeout");	672	$mpv_>bind_key (ESC => "letmeout");
650		673
		674	You cna find a list of key names L<in the mpv
		675	documentation\|https://mpv.io/manual/stable/#key-names>.
		676
651	The key configuration is lost when F<mpv> is stopped and must be (re-)done	677	The key configuration is lost when F<mpv> is stopped and must be (re-)done
652	after every C<start>.	678	after every C<start>.
653		679
654	=cut	680	=cut
655		681
…		…
658		684
659	$event =~ s/([^A-Za-z0-9\-_])/sprintf "\\x%02x", ord $1/ge;	685	$event =~ s/([^A-Za-z0-9\-_])/sprintf "\\x%02x", ord $1/ge;
660	$self->cmd (keybind => $key => "no-osd script-message AnyEvent::MPV key $event");	686	$self->cmd (keybind => $key => "no-osd script-message AnyEvent::MPV key $event");
661	}	687	}
662		688
		689	=item [$guard] = $mpv->register_event ($event => $coderef->($mpv, $event, $data))
		690
		691	This method registers a callback to be invoked for a specific
		692	event. Whenever the event occurs, it calls the coderef with the C<$mpv>
		693	object, the C<$event> name and the event object, just like the C<on_event>
		694	method.
		695
		696	For a lst of events, see L<the mpv
		697	documentation\|https://mpv.io/manual/stable/#list-of-events>. Any
		698	underscore in the event name is replaced by a minus sign, so you can
		699	specify event names using underscores for easier quoting in Perl.
		700
		701	In void context, the handler stays registered until C<stop> is called. In
		702	any other context, it returns a guard object that, when destroyed, will
		703	unregister the handler.
		704
		705	You can register multiple handlers for the same event, and this method
		706	does not interfere with the C<on_event> mechanism. That is, you can
		707	completely ignore this method and handle events in a C<on_event> handler,
		708	or mix both approaches as you see fit.
		709
		710	Note that unlike commands, event handlers are registered immediately, that
		711	is, you can issue a command, then register an event handler and then get
		712	an event for this handler I<before> the command is even sent to F<mpv>. If
		713	this kind of race is an issue, you can issue a dummy command such as
		714	C<get_version> and register the handler when the reply is received.
		715
		716	=cut
		717
663	sub AnyEvent::MPV::Unobserve::DESTROY {	718	sub AnyEvent::MPV::Unevent::DESTROY {
664	my ($mpv, $obscb, $obsid) = @{$_[0]};	719	my ($evtcb, $event, $evtid) = @{$_[0]};
		720	delete $evtcb->{$event}{$evtid};
		721	}
665		722
666	delete $obscb->{$obsid};	723	sub register_event {
		724	my ($self, $event, $cb) = @_;
667		725
668	if ($obscb == $mpv->{obscb}) {	726	$event =~ y/_/-/;
669	$mpv->cmd (unobserve_property => $obsid+0);	727
670	}	728	my $evtid = ++$self->{evtid};
		729	$self->{evtcb}{$event}{$evtid} = $cb;
		730
		731	defined wantarray
		732	and bless [$self->{evtcb}, $event, $evtid], AnyEvent::MPV::Unevent::
671	}	733	}
672		734
673	=item [$guard] = $mpv->observe_property ($name => $coderef->($mpv, $name, $value))	735	=item [$guard] = $mpv->observe_property ($name => $coderef->($mpv, $name, $value))
674		736
675	=item [$guard] = $mpv->observe_property_string ($name => $coderef->($mpv, $name, $value))	737	=item [$guard] = $mpv->observe_property_string ($name => $coderef->($mpv, $name, $value))
…		…
718		780
719	() # ensure the above method is called in void context	781	() # ensure the above method is called in void context
720	}	782	}
721		783
722	=cut	784	=cut
		785
		786	sub AnyEvent::MPV::Unobserve::DESTROY {
		787	my ($mpv, $obscb, $obsid) = @{$_[0]};
		788
		789	delete $obscb->{$obsid};
		790
		791	if ($obscb == $mpv->{obscb}) {
		792	$mpv->cmd (unobserve_property => $obsid+0);
		793	}
		794	}
723		795
724	sub _observe_property {	796	sub _observe_property {
725	my ($self, $type, $property, $cb) = @_;	797	my ($self, $type, $property, $cb) = @_;
726		798
727	my $obsid = OBSID + ++$self->{obsid};	799	my $obsid = OBSID + ++$self->{obsid};
…		…
760	care and deal with the breakage.	832	care and deal with the breakage.
761		833
762	If you don't want to go to the effort of subclassing this module, you can	834	If you don't want to go to the effort of subclassing this module, you can
763	also specify all event handlers as constructor keys.	835	also specify all event handlers as constructor keys.
764		836
		837	=head1 EXAMPLES
		838
		839	Here are some real-world code snippets, thrown in here mainly to give you
		840	some example code to copy.
		841
		842	=head2 doomfrontend
		843
		844	At one point I replaced mythtv-frontend by my own terminal-based video
		845	player (based on rxvt-unicode). I toyed with the diea of using F<mpv>'s
		846	subtitle engine to create the user interface, but that is hard to use
		847	since you don't know how big your letters are. It is also where most of
		848	this modules code has originally been developed in.
		849
		850	It uses a unified input queue to handle various remote controls, so its
		851	event handling needs are very simple - it simply feeds all events into the
		852	input queue:
		853
		854	my $mpv = AnyEvent::MPV->new (
		855	mpv => $MPV,
		856	args => \@MPV_ARGS,
		857	on_event => sub {
		858	input_feed "mpv/$_[1]", $_[2];
		859	},
		860	on_key => sub {
		861	input_feed $_[1];
		862	},
		863	on_eof => sub {
		864	input_feed "mpv/quit";
		865	},
		866	);
		867
		868	...
		869
		870	$mpv->start ("--idle=yes", "--pause", "--force-window=no");
		871
		872	It also doesn't use complicated command line arguments - the file search
		873	options have the most impact, as they prevent F<mpv> from scanning
		874	directories with tens of thousands of files for subtitles and more:
		875
		876	--audio-client-name=doomfrontend
		877	--osd-on-seek=msg-bar --osd-bar-align-y=-0.85 --osd-bar-w=95
		878	--sub-auto=exact --audio-file-auto=exact
		879
		880	Since it runs on a TV without a desktop environemnt, it tries to keep complications such as dbus
		881	away and the screensaver happy:
		882
		883	# prevent xscreensaver from doing something stupid, such as starting dbus
		884	$ENV{DBUS_SESSION_BUS_ADDRESS} = "/"; # prevent dbus autostart for sure
		885	$ENV{XDG_CURRENT_DESKTOP} = "generic";
		886
		887	It does bind a number of keys to internal (to doomfrontend) commands:
		888
		889	for (
		890	List::Util::pairs qw(
		891	ESC return
		892	q return
		893	ENTER enter
		894	SPACE pause
		895	[ steprev
		896	] stepfwd
		897	j subtitle
		898	BS red
		899	i green
		900	o yellow
		901	b blue
		902	D triangle
		903	UP up
		904	DOWN down
		905	RIGHT right
		906	LEFT left
		907	),
		908	(map { ("KP$_" => "num$_") } 0..9),
		909	KP_INS => 0, # KP0, but different
		910	) {
		911	$mpv->bind_key ($_->[0] => $_->[1]);
		912	}
		913
		914	It also reacts to sponsorblock chapters, so it needs to know when vidoe
		915	chapters change. Preadting C<AnyEvent::MPV>, it handles observers
		916	manually:
		917
		918	$mpv->cmd (observe_property => 1, "chapter-metadata");
		919
		920	It also tries to apply an F<mpv> profile, if it exists:
		921
		922	eval {
		923	# the profile is optional
		924	$mpv->cmd ("apply-profile" => "doomfrontend");
		925	};
		926
		927	Most of the complicated parts deal with saving and restoring per-video
		928	data, such as bookmarks, playing position, selected audio and subtitle
		929	tracks and so on. However, since it uses L<Coro>, it can conveniently
		930	block and wait for replies, which is n ot possible in purely event based
		931	programs, as you are not allowed to block inside event callbacks in most
		932	event loops. This simplifies the code quite a bit.
		933
		934	When the file to be played is a Tv recording done by mythtv, it uses the
		935	C<appending> protocol and deinterlacing:
		936
		937	if (is_myth $mpv_path) {
		938	$mpv_path = "appending://$mpv_path";
		939	$initial_deinterlace = 1;
		940	}
		941
		942	Otherwise, it sets some defaults and loads the file (I forgot what the
		943	C<dummy> argument is for, but I am sure it is needed by some F<mpv>
		944	version):
		945
		946	$mpv->cmd ("script-message", "osc-visibility", "never", "dummy");
		947	$mpv->cmd ("set", "vid", "auto");
		948	$mpv->cmd ("set", "aid", "auto");
		949	$mpv->cmd ("set", "sid", "no");
		950	$mpv->cmd ("set", "file-local-options/chapters-file", $mpv->escape_binary ("$mpv_path.chapters"));
		951	$mpv->cmd ("loadfile", $mpv->escape_binary ($mpv_path));
		952	$mpv->cmd ("script-message", "osc-visibility", "auto", "dummy");
		953
		954	Handling events makes the main bulk of video playback code. For example,
		955	various ways of ending playback:
		956
		957	if ($INPUT eq "mpv/quit") { # should not happen, but allows user to kill etc. without consequence
		958	$status = 1;
		959	mpv_init; # try reinit
		960	last;
		961
		962	} elsif ($INPUT eq "mpv/idle") { # normal end-of-file
		963	last;
		964
		965	} elsif ($INPUT eq "return") {
		966	$status = 1;
		967	last;
		968
		969	Or the code that actually starts playback, once the file is loaded:
		970
		971	our %SAVE_PROPERTY = (aid => 1, sid => 1, "audio-delay" => 1);
		972
		973	...
		974
		975	my $oid = 100;
		976
		977	} elsif ($INPUT eq "mpv/file-loaded") { # start playing, configure video
		978	$mpv->cmd ("seek", $playback_start, "absolute+exact") if $playback_start > 0;
		979
		980	my $target_fps = eval { $mpv->cmd_recv ("get_property", "container-fps") } \|\| 60;
		981	$target_fps *= play_video_speed_mult;
		982	set_fps $target_fps;
		983
		984	unless (eval { $mpv->cmd_recv ("get_property", "video-format") }) {
		985	$mpv->cmd ("set", "file-local-options/lavfi-complex", "[aid1] asplit [ao], showcqt=..., format=yuv420p [vo]");
		986	};
		987
		988	for my $prop (keys %SAVE_PROPERTY) {
		989	if (exists $PLAYING_STATE->{"mpv_$prop"}) {
		990	$mpv->cmd ("set", "$prop", $PLAYING_STATE->{"mpv_$prop"} . "");
		991	}
		992
		993	$mpv->cmd ("observe_property", ++$oid, $prop);
		994	}
		995
		996	play_video_set_speed;
		997	$mpv->cmd ("set", "osd-level", "$OSD_LEVEL");
		998	$mpv->cmd ("observe_property", ++$oid, "osd-level");
		999	$mpv->cmd ("set", "pause", "no");
		1000
		1001	$mpv->cmd ("set_property", "deinterlace", "yes")
		1002	if $initial_deinterlace;
		1003
		1004	There is a lot going on here. First it seeks to the actual playback
		1005	position, if it is not at the start of the file (it would probaby be more
		1006	efficient to set the starting position before loading the file, though,
		1007	but this is good enough).
		1008
		1009	Then it plays with the display fps, to set it to something harmonious
		1010	w.r.t. the video framerate.
		1011
		1012	If the file does not have a video part, it assumes it is an audio file and
		1013	sets a visualizer.
		1014
		1015	Also, a number of properties are not global, but per-file. At the moment,
		1016	this is C<audio-delay>, and the current audio/subtitle track, which it
		1017	sets, and also creates an observer. Again, this doesn'T use the observe
		1018	functionality of this module, but handles it itself, assigning obsevrer
		1019	ids 100+ to temporary/per-file observers.
		1020
		1021	Lastly, it sets some global (or per-youtube-uploader) parameters, such as
		1022	speed, and unpauses. Property changes are handled like other input events:
		1023
		1024	} elsif ($INPUT eq "mpv/property-change") {
		1025	my $prop = $INPUT_DATA->{name};
		1026
		1027	if ($prop eq "chapter-metadata") {
		1028	if ($INPUT_DATA->{data}{TITLE} =~ /^\[SponsorBlock\]: (.*)/) {
		1029	my $section = $1;
		1030	my $skip;
		1031
		1032	$skip \|\|= $SPONSOR_SKIP{$_}
		1033	for split /\s,\s/, $section;
		1034
		1035	if (defined $skip) {
		1036	if ($skip) {
		1037	# delay a bit, in case we get two metadata changes in quick succession, e.g.
		1038	# because we have a skip at file load time.
		1039	$skip_delay = AE::timer 2/50, 0, sub {
		1040	$mpv->cmd ("no-osd", "add", "chapter", 1);
		1041	$mpv->cmd ("show-text", "skipped sponsorblock section \"$section\"", 3000);
		1042	};
		1043	} else {
		1044	undef $skip_delay;
		1045	$mpv->cmd ("show-text", "NOT skipping sponsorblock section \"$section\"", 3000);
		1046	}
		1047	} else {
		1048	$mpv->cmd ("show-text", "UNRECOGNIZED sponsorblock section \"$section\"", 60000);
		1049	}
		1050	} else {
		1051	# cancel a queued skip
		1052	undef $skip_delay;
		1053	}
		1054
		1055	} elsif (exists $SAVE_PROPERTY{$prop}) {
		1056	$PLAYING_STATE->{"mpv_$prop"} = $INPUT_DATA->{data};
		1057	::state_save;
		1058	}
		1059
		1060	This saves back the per-file properties, and also handles chapter changes
		1061	in a hacky way.
		1062
		1063	Most of the handlers are very simple, though. For example:
		1064
		1065	} elsif ($INPUT eq "pause") {
		1066	$mpv->cmd ("cycle", "pause");
		1067	$PLAYING_STATE->{curpos} = $mpv->cmd_recv ("get_property", "playback-time");
		1068	} elsif ($INPUT eq "right") {
		1069	$mpv->cmd ("osd-msg-bar", "seek", 30, "relative+exact");
		1070	} elsif ($INPUT eq "left") {
		1071	$mpv->cmd ("osd-msg-bar", "seek", -5, "relative+exact");
		1072	} elsif ($INPUT eq "up") {
		1073	$mpv->cmd ("osd-msg-bar", "seek", +600, "relative+exact");
		1074	} elsif ($INPUT eq "down") {
		1075	$mpv->cmd ("osd-msg-bar", "seek", -600, "relative+exact");
		1076	} elsif ($INPUT eq "select") {
		1077	$mpv->cmd ("osd-msg-bar", "add", "audio-delay", "-0.100");
		1078	} elsif ($INPUT eq "start") {
		1079	$mpv->cmd ("osd-msg-bar", "add", "audio-delay", "0.100");
		1080	} elsif ($INPUT eq "intfwd") {
		1081	$mpv->cmd ("no-osd", "frame-step");
		1082	} elsif ($INPUT eq "audio") {
		1083	$mpv->cmd ("osd-auto", "cycle", "audio");
		1084	} elsif ($INPUT eq "subtitle") {
		1085	$mpv->cmd ("osd-auto", "cycle", "sub");
		1086	} elsif ($INPUT eq "triangle") {
		1087	$mpv->cmd ("osd-auto", "cycle", "deinterlace");
		1088
		1089	Once a file has finished playing (or the user strops playback), it pauses,
		1090	unobserves the per-file observers, and saves the current position for to
		1091	be able to resume:
		1092
		1093	$mpv->cmd ("set", "pause", "yes");
		1094
		1095	while ($oid > 100) {
		1096	$mpv->cmd ("unobserve_property", $oid--);
		1097	}
		1098
		1099	$PLAYING_STATE->{curpos} = $mpv->cmd_recv ("get_property", "playback-time");
		1100
		1101	And thats most of the F<mpv>-related code.
		1102
		1103	=head2 F<Gtk2::CV>
		1104
		1105	F<Gtk2::CV> is low-feature image viewer that I use many times daily
		1106	because it can handle directories with millions of files without falling
		1107	over. It also had the ability to play videos for ages, but it used an
		1108	older, crappier protocol to talk to F<mpv> and used F<ffprobe> before
		1109	playing each file instead of letting F<mpv> handle format/size detection.
		1110
		1111	After writing this module, I decided to upgprade Gtk2::CV by making use
		1112	of it, with the goal of getting rid of F<ffprobe> and being ablew to
		1113	reuse F<mpv> processes, which would have a multitude of speed benefits
		1114	(for example, fork+exec of F<mpv> caused the kernel to close all file
		1115	descriptors, which could take minutes if a large file was being copied via
		1116	NFS, as the kernel waited for thr buffers to be flushed on close - not
		1117	having to start F<mpv> gets rid of this issue).
		1118
		1119	Setting up is only complicated by the fact that F<mpv> needs to be
		1120	embedded into an existing window. To keep control of all inputs,
		1121	F<Gtk2::CV> puts an eventbox in front of F<mpv>, so F<mpv> receives no
		1122	input events:
		1123
		1124	$self->{mpv} = AnyEvent::MPV->new (
		1125	trace => $ENV{CV_MPV_TRACE},
		1126	);
		1127
		1128	# create an eventbox, so we receive all input events
		1129	my $box = $self->{mpv_eventbox} = new Gtk2::EventBox;
		1130	$box->set_above_child (1);
		1131	$box->set_visible_window (0);
		1132	$box->set_events ([]);
		1133	$box->can_focus (0);
		1134
		1135	# create a drawingarea that mpv can display into
		1136	my $window = $self->{mpv_window} = new Gtk2::DrawingArea;
		1137	$box->add ($window);
		1138
		1139	# put the drawingarea intot he eventbox, and the eventbox into our display window
		1140	$self->add ($box);
		1141
		1142	# we need to pass the window id to F<mpv>, which means we need to realise
		1143	# the drawingarea, so an X window is allocated for it.
		1144	$self->show_all;
		1145	$window->realize;
		1146	my $xid = $window->window->get_xid;
		1147
		1148	Then it starts F<mpv> using this setup:
		1149
		1150	local $ENV{LC_ALL} = "POSIX";
		1151	$self->{mpv}->start (
		1152	"--no-terminal",
		1153	"--no-input-terminal",
		1154	"--no-input-default-bindings",
		1155	"--no-input-cursor",
		1156	"--input-conf=/dev/null",
		1157	"--input-vo-keyboard=no",
		1158
		1159	"--loop-file=inf",
		1160	"--force-window=yes",
		1161	"--idle=yes",
		1162
		1163	"--audio-client-name=CV",
		1164
		1165	"--osc=yes", # --osc=no displays fading play/pause buttons instead
		1166
		1167	"--wid=$xid",
		1168	);
		1169
		1170	$self->{mpv}->cmd ("script-message" => "osc-visibility" => "never", "dummy");
		1171	$self->{mpv}->cmd ("osc-idlescreen" => "no");
		1172
		1173	It also prepares a hack to force a ConfigureNotify event on every vidoe
		1174	reconfig:
		1175
		1176	# force a configurenotify on every video-reconfig
		1177	$self->{mpv_reconfig} = $self->{mpv}->register_event (video_reconfig => sub {
		1178	my ($mpv, $event, $data) = @_;
		1179
		1180	$self->mpv_window_update;
		1181	});
		1182
		1183	The way this is done is by doing a "dummy" resize to 1x1 and back:
		1184
		1185	$self->{mpv_window}->window->resize (1, 1),
		1186	$self->{mpv_window}->window->resize ($self->{w}, $self->{h});
		1187
		1188	Without this, F<mpv> often doesn't "get" the correct window size. Doing
		1189	it this way is not nice, but I didn't fine a nicer way to do it.
		1190
		1191	When no file is being played, F<mpv> is hidden and prepared:
		1192
		1193	$self->{mpv_eventbox}->hide;
		1194
		1195	$self->{mpv}->cmd (set_property => "pause" => "yes");
		1196	$self->{mpv}->cmd ("playlist_remove", "current");
		1197	$self->{mpv}->cmd (set_property => "video-rotate" => 0);
		1198	$self->{mpv}->cmd (set_property => "lavfi-complex" => "");
		1199
		1200	Loading a file is a bit more complicated, as bluray and DVD rips are
		1201	supported:
		1202
		1203	if ($moviedir) {
		1204	if ($moviedir eq "br") {
		1205	$mpv->cmd (set => "bluray-device" => $path);
		1206	$mpv->cmd (loadfile => "bd://");
		1207	} elsif ($moviedir eq "dvd") {
		1208	$mpv->cmd (set => "dvd-device" => $path);
		1209	$mpv->cmd (loadfile => "dvd://");
		1210	}
		1211	} elsif ($type eq "video/iso-bluray") {
		1212	$mpv->cmd (set => "bluray-device" => $path);
		1213	$mpv->cmd (loadfile => "bd://");
		1214	} else {
		1215	$mpv->cmd (loadfile => $mpv->escape_binary ($path));
		1216	}
		1217
		1218	After this, C<Gtk2::CV> waits for the file to be loaded, video to be
		1219	configured, and then queries the video size (to resize its own window)
		1220	and video format (to decide whether an audio visualizer is needed for
		1221	audio playback). The problematic word here is "wait", as this needs to be
		1222	imploemented using callbacks.
		1223
		1224	This made the code much harder to write, as the whole setup is very
		1225	asynchronous (C<Gtk2::CV> talks to the command interface in F<mpv>, which
		1226	talks to the decode and playback parts, all of which run asynchronously
		1227	w.r.t. each other. In practise, this can mean that C<Gtk2::CV> waits for
		1228	a file to be loaded by F<mpv> while the command interface of F<mpv> still
		1229	deals with the previous file and the decoder still handles an even older
		1230	file). Adding to this fact is that Gtk2::CV is bound by the glib event
		1231	loop, which means we cannot wait for replies form F<mpv> anywhere, so
		1232	everything has to be chained callbacks.
		1233
		1234	The way this is handled is by creating a new empty hash ref that is unique
		1235	for each loaded file, and use it to detect whether the event is old or
		1236	not, and also store C<AnyEvent::MPV> guard objects in it:
		1237
		1238	# every time we loaded a file, we create a new hash
		1239	my $guards = $self->{mpv_guards} = { };
		1240
		1241	Then, when we wait for an event to occur, delete the handler, and, if the
		1242	C<mpv_guards> object has changed, we ignore it. Something like this:
		1243
		1244	$guards->{file_loaded} = $mpv->register_event (file_loaded => sub {
		1245	delete $guards->{file_loaded};
		1246	return if $guards != $self->{mpv_guards};
		1247
		1248	Commands do not have guards since they cnanot be cancelled, so we don't
		1249	have to do this for commands. But what prevents us form misinterpreting
		1250	an old event? Since F<mpv> (by default) handles commands synchronously,
		1251	we can queue a dummy command, whose only purpose is to tell us when all
		1252	previous commands are done. We use C<get_version> for this.
		1253
		1254	The simplified code looks like this:
		1255
		1256	Scalar::Util::weaken $self;
		1257
		1258	$mpv->cmd ("get_version")->cb (sub {
		1259
		1260	$guards->{file_loaded} = $mpv->register_event (file_loaded => sub {
		1261	delete $guards->{file_loaded};
		1262	return if $guards != $self->{mpv_guards};
		1263
		1264	$mpv->cmd (get_property => "video-format")->cb (sub {
		1265	return if $guards != $self->{mpv_guards};
		1266
		1267	# video-format handling
		1268	return if eval { $_[0]->recv; 1 };
		1269
		1270	# no video? assume audio and visualize, cpu usage be damned
		1271	$mpv->cmd (set => "lavfi-complex" => ...");
		1272	});
		1273
		1274	$guards->{show} = $mpv->register_event (video_reconfig => sub {
		1275	delete $guards->{show};
		1276	return if $guards != $self->{mpv_guards};
		1277
		1278	$self->{mpv_eventbox}->show_all;
		1279
		1280	$w = $mpv->cmd (get_property => "dwidth");
		1281	$h = $mpv->cmd (get_property => "dheight");
		1282
		1283	$h->cb (sub {
		1284	$w = eval { $w->recv };
		1285	$h = eval { $h->recv };
		1286
		1287	$mpv->cmd (set_property => "pause" => "no");
		1288
		1289	if ($w && $h) {
		1290	# resize our window
		1291	}
		1292
		1293	});
		1294	});
		1295
		1296	});
		1297
		1298	});
		1299
		1300	Most of the rest of the code is much simpler and just deals with forwarding user commands:
		1301
		1302	} elsif ($key == $Gtk2::Gdk::Keysyms{Right}) { $mpv->cmd ("osd-msg-bar" => seek => "+10");
		1303	} elsif ($key == $Gtk2::Gdk::Keysyms{Left} ) { $mpv->cmd ("osd-msg-bar" => seek => "-10");
		1304	} elsif ($key == $Gtk2::Gdk::Keysyms{Up} ) { $mpv->cmd ("osd-msg-bar" => seek => "+60");
		1305	} elsif ($key == $Gtk2::Gdk::Keysyms{Down} ) { $mpv->cmd ("osd-msg-bar" => seek => "-60");
		1306	} elsif ($key == $Gtk2::Gdk::Keysyms{a}) ) { $mpv->cmd ("osd-msg-msg" => cycle => "audio");
		1307	} elsif ($key == $Gtk2::Gdk::Keysyms{j} ) { $mpv->cmd ("osd-msg-msg" => cycle => "sub");
		1308	} elsif ($key == $Gtk2::Gdk::Keysyms{o} ) { $mpv->cmd ("no-osd" => "cycle-values", "osd-level", "2", "3", "0", "2");
		1309	} elsif ($key == $Gtk2::Gdk::Keysyms{p} ) { $mpv->cmd ("no-osd" => cycle => "pause");
		1310	} elsif ($key == $Gtk2::Gdk::Keysyms{9} ) { $mpv->cmd ("osd-msg-bar" => add => "ao-volume", "-2");
		1311	} elsif ($key == $Gtk2::Gdk::Keysyms{0} ) { $mpv->cmd ("osd-msg-bar" => add => "ao-volume", "+2");
		1312
765	=head1 SEE ALSO	1313	=head1 SEE ALSO
766		1314
767	L<AnyEvent>, L<the mpv command documentation\|https://mpv.io/manual/stable/#command-interface>.	1315	L<AnyEvent>, L<the mpv command documentation\|https://mpv.io/manual/stable/#command-interface>.
768		1316
769	=head1 AUTHOR	1317	=head1 AUTHOR

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent-MPV/MPV.pm (file contents): Revision 1.10 by root, Mon Mar 20 12:31:03 2023 UTC vs. Revision 1.18 by root, Thu Mar 23 19:22:48 2023 UTC

Diff Legend

Comparing AnyEvent-MPV/MPV.pm (file contents):
Revision 1.10 by root, Mon Mar 20 12:31:03 2023 UTC vs.
Revision 1.18 by root, Thu Mar 23 19:22:48 2023 UTC