--- AnyEvent/README 2005/12/30 01:28:31 1.4 +++ AnyEvent/README 2009/06/23 23:37:32 1.40 @@ -1,84 +1,1033 @@ NAME AnyEvent - provide framework for multiple event loops - Event, Coro, Glib, Tk - various supported event loops + EV, Event, Glib, Tk, Perl, Event::Lib, Qt and POE are various supported + event loops. SYNOPSIS use AnyEvent; - my $w = AnyEvent->io (fh => ..., poll => "[rw]+", cb => sub { - my ($poll_got) = @_; - ... - }); - - * only one io watcher per $fh and $poll type is allowed (i.e. on a - socket you can have one r + one w or one rw watcher, not any more - (limitation by Tk). - - * the $poll_got passed to the handler needs to be checked by looking for - single characters (e.g. with a regex), as it can contain more event - types than were requested (e.g. a 'w' watcher might generate 'rw' - events, limitation by Glib). + # file descriptor readable + my $w = AnyEvent->io (fh => $fh, poll => "r", cb => sub { ... }); - * AnyEvent will keep filehandles alive, so as long as the watcher - exists, the filehandle exists. - - my $w = AnyEvent->timer (after => $seconds, cb => sub { + # one-shot or repeating timers + my $w = AnyEvent->timer (after => $seconds, cb => sub { ... }); + my $w = AnyEvent->timer (after => $seconds, interval => $seconds, cb => ... + + print AnyEvent->now; # prints current event loop time + print AnyEvent->time; # think Time::HiRes::time or simply CORE::time. + + # POSIX signal + my $w = AnyEvent->signal (signal => "TERM", cb => sub { ... }); + + # child process exit + my $w = AnyEvent->child (pid => $pid, cb => sub { + my ($pid, $status) = @_; ... }); - * io and time watchers get canceled whenever $w is destroyed, so keep a - copy - - * timers can only be used once and must be recreated for repeated - operation (limitation by Glib and Tk). + # called when event loop idle (if applicable) + my $w = AnyEvent->idle (cb => sub { ... }); - my $w = AnyEvent->condvar; # kind of main loop replacement - $w->wait; # enters main loop till $condvar gets ->broadcast - $w->broadcast; # wake up current and all future wait's - - * condvars are used to give blocking behaviour when neccessary. Create a - condvar for any "request" or "event" your module might create, - "->broadcast" it when the event happens and provide a function that - calls "->wait" for it. See the examples below. + my $w = AnyEvent->condvar; # stores whether a condition was flagged + $w->send; # wake up current and all future recv's + $w->recv; # enters "main loop" till $condvar gets ->send + # use a condvar in callback mode: + $w->cb (sub { $_[0]->recv }); + +INTRODUCTION/TUTORIAL + This manpage is mainly a reference manual. If you are interested in a + tutorial or some gentle introduction, have a look at the AnyEvent::Intro + manpage. + +WHY YOU SHOULD USE THIS MODULE (OR NOT) + Glib, POE, IO::Async, Event... CPAN offers event models by the dozen + nowadays. So what is different about AnyEvent? + + Executive Summary: AnyEvent is *compatible*, AnyEvent is *free of + policy* and AnyEvent is *small and efficient*. + + First and foremost, *AnyEvent is not an event model* itself, it only + interfaces to whatever event model the main program happens to use, in a + pragmatic way. For event models and certain classes of immortals alike, + the statement "there can only be one" is a bitter reality: In general, + only one event loop can be active at the same time in a process. + AnyEvent cannot change this, but it can hide the differences between + those event loops. + + The goal of AnyEvent is to offer module authors the ability to do event + programming (waiting for I/O or timer events) without subscribing to a + religion, a way of living, and most importantly: without forcing your + module users into the same thing by forcing them to use the same event + model you use. + + For modules like POE or IO::Async (which is a total misnomer as it is + actually doing all I/O *synchronously*...), using them in your module is + like joining a cult: After you joined, you are dependent on them and you + cannot use anything else, as they are simply incompatible to everything + that isn't them. What's worse, all the potential users of your module + are *also* forced to use the same event loop you use. + + AnyEvent is different: AnyEvent + POE works fine. AnyEvent + Glib works + fine. AnyEvent + Tk works fine etc. etc. but none of these work together + with the rest: POE + IO::Async? No go. Tk + Event? No go. Again: if your + module uses one of those, every user of your module has to use it, too. + But if your module uses AnyEvent, it works transparently with all event + models it supports (including stuff like IO::Async, as long as those use + one of the supported event loops. It is trivial to add new event loops + to AnyEvent, too, so it is future-proof). + + In addition to being free of having to use *the one and only true event + model*, AnyEvent also is free of bloat and policy: with POE or similar + modules, you get an enormous amount of code and strict rules you have to + follow. AnyEvent, on the other hand, is lean and up to the point, by + only offering the functionality that is necessary, in as thin as a + wrapper as technically possible. + + Of course, AnyEvent comes with a big (and fully optional!) toolbox of + useful functionality, such as an asynchronous DNS resolver, 100% + non-blocking connects (even with TLS/SSL, IPv6 and on broken platforms + such as Windows) and lots of real-world knowledge and workarounds for + platform bugs and differences. + + Now, if you *do want* lots of policy (this can arguably be somewhat + useful) and you want to force your users to use the one and only event + model, you should *not* use this module. DESCRIPTION AnyEvent provides an identical interface to multiple event loops. This - allows module authors to utilizy an event loop without forcing module + allows module authors to utilise an event loop without forcing module users to use the same event loop (as only a single event loop can coexist peacefully at any one time). - The interface itself is vaguely similar but not identical to the Event + The interface itself is vaguely similar, but not identical to the Event module. - On the first call of any method, the module tries to detect the - currently loaded event loop by probing wether any of the following - modules is loaded: Coro::Event, Event, Glib, Tk. The first one found is - used. If none is found, the module tries to load these modules in the - order given. The first one that could be successfully loaded will be - used. If still none could be found, it will issue an error. + During the first call of any watcher-creation method, the module tries + to detect the currently loaded event loop by probing whether one of the + following modules is already loaded: EV, Event, Glib, + AnyEvent::Impl::Perl, Tk, Event::Lib, Qt, POE. The first one found is + used. If none are found, the module tries to load these modules + (excluding Tk, Event::Lib, Qt and POE as the pure perl adaptor should + always succeed) in the order given. The first one that can be + successfully loaded will be used. If, after this, still none could be + found, AnyEvent will fall back to a pure-perl event loop, which is not + very efficient, but should work everywhere. + + Because AnyEvent first checks for modules that are already loaded, + loading an event model explicitly before first using AnyEvent will + likely make that model the default. For example: -ENVIRONMENT VARIABLES - The following environment variables are used by this module: + use Tk; + use AnyEvent; + + # .. AnyEvent will likely default to Tk + + The *likely* means that, if any module loads another event model and + starts using it, all bets are off. Maybe you should tell their authors + to use AnyEvent so their modules work together with others seamlessly... + + The pure-perl implementation of AnyEvent is called + "AnyEvent::Impl::Perl". Like other event modules you can load it + explicitly and enjoy the high availability of that event loop :) + +WATCHERS + AnyEvent has the central concept of a *watcher*, which is an object that + stores relevant data for each kind of event you are waiting for, such as + the callback to call, the file handle to watch, etc. + + These watchers are normal Perl objects with normal Perl lifetime. After + creating a watcher it will immediately "watch" for events and invoke the + callback when the event occurs (of course, only when the event model is + in control). + + Note that callbacks must not permanently change global variables + potentially in use by the event loop (such as $_ or $[) and that + callbacks must not "die". The former is good programming practise in + Perl and the latter stems from the fact that exception handling differs + widely between event loops. + + To disable the watcher you have to destroy it (e.g. by setting the + variable you store it in to "undef" or otherwise deleting all references + to it). + + All watchers are created by calling a method on the "AnyEvent" class. + + Many watchers either are used with "recursion" (repeating timers for + example), or need to refer to their watcher object in other ways. + + An any way to achieve that is this pattern: + + my $w; $w = AnyEvent->type (arg => value ..., cb => sub { + # you can use $w here, for example to undef it + undef $w; + }); + + Note that "my $w; $w =" combination. This is necessary because in Perl, + my variables are only visible after the statement in which they are + declared. + + I/O WATCHERS + You can create an I/O watcher by calling the "AnyEvent->io" method with + the following mandatory key-value pairs as arguments: + + "fh" is the Perl *file handle* (*not* file descriptor) to watch for + events (AnyEvent might or might not keep a reference to this file + handle). Note that only file handles pointing to things for which + non-blocking operation makes sense are allowed. This includes sockets, + most character devices, pipes, fifos and so on, but not for example + files or block devices. + + "poll" must be a string that is either "r" or "w", which creates a + watcher waiting for "r"eadable or "w"ritable events, respectively. + + "cb" is the callback to invoke each time the file handle becomes ready. + + Although the callback might get passed parameters, their value and + presence is undefined and you cannot rely on them. Portable AnyEvent + callbacks cannot use arguments passed to I/O watcher callbacks. + + The I/O watcher might use the underlying file descriptor or a copy of + it. You must not close a file handle as long as any watcher is active on + the underlying file descriptor. + + Some event loops issue spurious readyness notifications, so you should + always use non-blocking calls when reading/writing from/to your file + handles. + + Example: wait for readability of STDIN, then read a line and disable the + watcher. + + my $w; $w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub { + chomp (my $input = ); + warn "read: $input\n"; + undef $w; + }); + + TIME WATCHERS + You can create a time watcher by calling the "AnyEvent->timer" method + with the following mandatory arguments: + + "after" specifies after how many seconds (fractional values are + supported) the callback should be invoked. "cb" is the callback to + invoke in that case. + + Although the callback might get passed parameters, their value and + presence is undefined and you cannot rely on them. Portable AnyEvent + callbacks cannot use arguments passed to time watcher callbacks. + + The callback will normally be invoked once only. If you specify another + parameter, "interval", as a strictly positive number (> 0), then the + callback will be invoked regularly at that interval (in fractional + seconds) after the first invocation. If "interval" is specified with a + false value, then it is treated as if it were missing. + + The callback will be rescheduled before invoking the callback, but no + attempt is done to avoid timer drift in most backends, so the interval + is only approximate. + + Example: fire an event after 7.7 seconds. + + my $w = AnyEvent->timer (after => 7.7, cb => sub { + warn "timeout\n"; + }); + + # to cancel the timer: + undef $w; + + Example 2: fire an event after 0.5 seconds, then roughly every second. + + my $w = AnyEvent->timer (after => 0.5, interval => 1, cb => sub { + warn "timeout\n"; + }; + + TIMING ISSUES + There are two ways to handle timers: based on real time (relative, "fire + in 10 seconds") and based on wallclock time (absolute, "fire at 12 + o'clock"). + + While most event loops expect timers to specified in a relative way, + they use absolute time internally. This makes a difference when your + clock "jumps", for example, when ntp decides to set your clock backwards + from the wrong date of 2014-01-01 to 2008-01-01, a watcher that is + supposed to fire "after" a second might actually take six years to + finally fire. + + AnyEvent cannot compensate for this. The only event loop that is + conscious about these issues is EV, which offers both relative + (ev_timer, based on true relative time) and absolute (ev_periodic, based + on wallclock time) timers. + + AnyEvent always prefers relative timers, if available, matching the + AnyEvent API. + + AnyEvent has two additional methods that return the "current time": + + AnyEvent->time + This returns the "current wallclock time" as a fractional number of + seconds since the Epoch (the same thing as "time" or + "Time::HiRes::time" return, and the result is guaranteed to be + compatible with those). + + It progresses independently of any event loop processing, i.e. each + call will check the system clock, which usually gets updated + frequently. + + AnyEvent->now + This also returns the "current wallclock time", but unlike "time", + above, this value might change only once per event loop iteration, + depending on the event loop (most return the same time as "time", + above). This is the time that AnyEvent's timers get scheduled + against. + + *In almost all cases (in all cases if you don't care), this is the + function to call when you want to know the current time.* + + This function is also often faster then "AnyEvent->time", and thus + the preferred method if you want some timestamp (for example, + AnyEvent::Handle uses this to update it's activity timeouts). + + The rest of this section is only of relevance if you try to be very + exact with your timing, you can skip it without bad conscience. + + For a practical example of when these times differ, consider + Event::Lib and EV and the following set-up: + + The event loop is running and has just invoked one of your callback + at time=500 (assume no other callbacks delay processing). In your + callback, you wait a second by executing "sleep 1" (blocking the + process for a second) and then (at time=501) you create a relative + timer that fires after three seconds. + + With Event::Lib, "AnyEvent->time" and "AnyEvent->now" will both + return 501, because that is the current time, and the timer will be + scheduled to fire at time=504 (501 + 3). + + With EV, "AnyEvent->time" returns 501 (as that is the current time), + but "AnyEvent->now" returns 500, as that is the time the last event + processing phase started. With EV, your timer gets scheduled to run + at time=503 (500 + 3). + + In one sense, Event::Lib is more exact, as it uses the current time + regardless of any delays introduced by event processing. However, + most callbacks do not expect large delays in processing, so this + causes a higher drift (and a lot more system calls to get the + current time). + + In another sense, EV is more exact, as your timer will be scheduled + at the same time, regardless of how long event processing actually + took. + + In either case, if you care (and in most cases, you don't), then you + can get whatever behaviour you want with any event loop, by taking + the difference between "AnyEvent->time" and "AnyEvent->now" into + account. + + AnyEvent->now_update + Some event loops (such as EV or AnyEvent::Impl::Perl) cache the + current time for each loop iteration (see the discussion of + AnyEvent->now, above). + + When a callback runs for a long time (or when the process sleeps), + then this "current" time will differ substantially from the real + time, which might affect timers and time-outs. + + When this is the case, you can call this method, which will update + the event loop's idea of "current time". + + Note that updating the time *might* cause some events to be handled. + + SIGNAL WATCHERS + You can watch for signals using a signal watcher, "signal" is the signal + *name* in uppercase and without any "SIG" prefix, "cb" is the Perl + callback to be invoked whenever a signal occurs. + + Although the callback might get passed parameters, their value and + presence is undefined and you cannot rely on them. Portable AnyEvent + callbacks cannot use arguments passed to signal watcher callbacks. + + Multiple signal occurrences can be clumped together into one callback + invocation, and callback invocation will be synchronous. Synchronous + means that it might take a while until the signal gets handled by the + process, but it is guaranteed not to interrupt any other callbacks. + + The main advantage of using these watchers is that you can share a + signal between multiple watchers. + + This watcher might use %SIG, so programs overwriting those signals + directly will likely not work correctly. + + Example: exit on SIGINT + + my $w = AnyEvent->signal (signal => "INT", cb => sub { exit 1 }); + + CHILD PROCESS WATCHERS + You can also watch on a child process exit and catch its exit status. + + The child process is specified by the "pid" argument (if set to 0, it + watches for any child process exit). The watcher will triggered only + when the child process has finished and an exit status is available, not + on any trace events (stopped/continued). + + The callback will be called with the pid and exit status (as returned by + waitpid), so unlike other watcher types, you *can* rely on child watcher + callback arguments. + + This watcher type works by installing a signal handler for "SIGCHLD", + and since it cannot be shared, nothing else should use SIGCHLD or reap + random child processes (waiting for specific child processes, e.g. + inside "system", is just fine). + + There is a slight catch to child watchers, however: you usually start + them *after* the child process was created, and this means the process + could have exited already (and no SIGCHLD will be sent anymore). + + Not all event models handle this correctly (POE doesn't), but even for + event models that *do* handle this correctly, they usually need to be + loaded before the process exits (i.e. before you fork in the first + place). + + This means you cannot create a child watcher as the very first thing in + an AnyEvent program, you *have* to create at least one watcher before + you "fork" the child (alternatively, you can call "AnyEvent::detect"). + + Example: fork a process and wait for it + + my $done = AnyEvent->condvar; + + my $pid = fork or exit 5; + + my $w = AnyEvent->child ( + pid => $pid, + cb => sub { + my ($pid, $status) = @_; + warn "pid $pid exited with status $status"; + $done->send; + }, + ); + + # do something else, then wait for process exit + $done->recv; + + IDLE WATCHERS + Sometimes there is a need to do something, but it is not so important to + do it instantly, but only when there is nothing better to do. This + "nothing better to do" is usually defined to be "no other events need + attention by the event loop". + + Idle watchers ideally get invoked when the event loop has nothing better + to do, just before it would block the process to wait for new events. + Instead of blocking, the idle watcher is invoked. + + Most event loops unfortunately do not really support idle watchers (only + EV, Event and Glib do it in a usable fashion) - for the rest, AnyEvent + will simply call the callback "from time to time". + + Example: read lines from STDIN, but only process them when the program + is otherwise idle: + + my @lines; # read data + my $idle_w; + my $io_w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub { + push @lines, scalar ; + + # start an idle watcher, if not already done + $idle_w ||= AnyEvent->idle (cb => sub { + # handle only one line, when there are lines left + if (my $line = shift @lines) { + print "handled when idle: $line"; + } else { + # otherwise disable the idle watcher again + undef $idle_w; + } + }); + }); + + CONDITION VARIABLES + If you are familiar with some event loops you will know that all of them + require you to run some blocking "loop", "run" or similar function that + will actively watch for new events and call your callbacks. + + AnyEvent is different, it expects somebody else to run the event loop + and will only block when necessary (usually when told by the user). + + The instrument to do that is called a "condition variable", so called + because they represent a condition that must become true. + + Condition variables can be created by calling the "AnyEvent->condvar" + method, usually without arguments. The only argument pair allowed is + + "cb", which specifies a callback to be called when the condition + variable becomes true, with the condition variable as the first argument + (but not the results). + + After creation, the condition variable is "false" until it becomes + "true" by calling the "send" method (or calling the condition variable + as if it were a callback, read about the caveats in the description for + the "->send" method). + + Condition variables are similar to callbacks, except that you can + optionally wait for them. They can also be called merge points - points + in time where multiple outstanding events have been processed. And yet + another way to call them is transactions - each condition variable can + be used to represent a transaction, which finishes at some point and + delivers a result. + + Condition variables are very useful to signal that something has + finished, for example, if you write a module that does asynchronous http + requests, then a condition variable would be the ideal candidate to + signal the availability of results. The user can either act when the + callback is called or can synchronously "->recv" for the results. + + You can also use them to simulate traditional event loops - for example, + you can block your main program until an event occurs - for example, you + could "->recv" in your main program until the user clicks the Quit + button of your app, which would "->send" the "quit" event. + + Note that condition variables recurse into the event loop - if you have + two pieces of code that call "->recv" in a round-robin fashion, you + lose. Therefore, condition variables are good to export to your caller, + but you should avoid making a blocking wait yourself, at least in + callbacks, as this asks for trouble. + + Condition variables are represented by hash refs in perl, and the keys + used by AnyEvent itself are all named "_ae_XXX" to make subclassing easy + (it is often useful to build your own transaction class on top of + AnyEvent). To subclass, use "AnyEvent::CondVar" as base class and call + it's "new" method in your own "new" method. + + There are two "sides" to a condition variable - the "producer side" + which eventually calls "-> send", and the "consumer side", which waits + for the send to occur. + + Example: wait for a timer. + + # wait till the result is ready + my $result_ready = AnyEvent->condvar; + + # do something such as adding a timer + # or socket watcher the calls $result_ready->send + # when the "result" is ready. + # in this case, we simply use a timer: + my $w = AnyEvent->timer ( + after => 1, + cb => sub { $result_ready->send }, + ); + + # this "blocks" (while handling events) till the callback + # calls send + $result_ready->recv; + + Example: wait for a timer, but take advantage of the fact that condition + variables are also code references. + + my $done = AnyEvent->condvar; + my $delay = AnyEvent->timer (after => 5, cb => $done); + $done->recv; + + Example: Imagine an API that returns a condvar and doesn't support + callbacks. This is how you make a synchronous call, for example from the + main program: + + use AnyEvent::CouchDB; + + ... + + my @info = $couchdb->info->recv; + + And this is how you would just ste a callback to be called whenever the + results are available: - "PERL_ANYEVENT_VERBOSE" when set to 2 or higher, reports which event - model gets used. + $couchdb->info->cb (sub { + my @info = $_[0]->recv; + }); + + METHODS FOR PRODUCERS + These methods should only be used by the producing side, i.e. the + code/module that eventually sends the signal. Note that it is also the + producer side which creates the condvar in most cases, but it isn't + uncommon for the consumer to create it as well. + + $cv->send (...) + Flag the condition as ready - a running "->recv" and all further + calls to "recv" will (eventually) return after this method has been + called. If nobody is waiting the send will be remembered. + + If a callback has been set on the condition variable, it is called + immediately from within send. + + Any arguments passed to the "send" call will be returned by all + future "->recv" calls. + + Condition variables are overloaded so one can call them directly (as + a code reference). Calling them directly is the same as calling + "send". Note, however, that many C-based event loops do not handle + overloading, so as tempting as it may be, passing a condition + variable instead of a callback does not work. Both the pure perl and + EV loops support overloading, however, as well as all functions that + use perl to invoke a callback (as in AnyEvent::Socket and + AnyEvent::DNS for example). + + $cv->croak ($error) + Similar to send, but causes all call's to "->recv" to invoke + "Carp::croak" with the given error message/object/scalar. + + This can be used to signal any errors to the condition variable + user/consumer. + + $cv->begin ([group callback]) + $cv->end + These two methods are EXPERIMENTAL and MIGHT CHANGE. + + These two methods can be used to combine many transactions/events + into one. For example, a function that pings many hosts in parallel + might want to use a condition variable for the whole process. + + Every call to "->begin" will increment a counter, and every call to + "->end" will decrement it. If the counter reaches 0 in "->end", the + (last) callback passed to "begin" will be executed. That callback is + *supposed* to call "->send", but that is not required. If no + callback was set, "send" will be called without any arguments. + + Let's clarify this with the ping example: + + my $cv = AnyEvent->condvar; + + my %result; + $cv->begin (sub { $cv->send (\%result) }); + + for my $host (@list_of_hosts) { + $cv->begin; + ping_host_then_call_callback $host, sub { + $result{$host} = ...; + $cv->end; + }; + } + + $cv->end; + + This code fragment supposedly pings a number of hosts and calls + "send" after results for all then have have been gathered - in any + order. To achieve this, the code issues a call to "begin" when it + starts each ping request and calls "end" when it has received some + result for it. Since "begin" and "end" only maintain a counter, the + order in which results arrive is not relevant. + + There is an additional bracketing call to "begin" and "end" outside + the loop, which serves two important purposes: first, it sets the + callback to be called once the counter reaches 0, and second, it + ensures that "send" is called even when "no" hosts are being pinged + (the loop doesn't execute once). + + This is the general pattern when you "fan out" into multiple + subrequests: use an outer "begin"/"end" pair to set the callback and + ensure "end" is called at least once, and then, for each subrequest + you start, call "begin" and for each subrequest you finish, call + "end". + + METHODS FOR CONSUMERS + These methods should only be used by the consuming side, i.e. the code + awaits the condition. + + $cv->recv + Wait (blocking if necessary) until the "->send" or "->croak" methods + have been called on c<$cv>, while servicing other watchers normally. + + You can only wait once on a condition - additional calls are valid + but will return immediately. + + If an error condition has been set by calling "->croak", then this + function will call "croak". + + In list context, all parameters passed to "send" will be returned, + in scalar context only the first one will be returned. + + Not all event models support a blocking wait - some die in that case + (programs might want to do that to stay interactive), so *if you are + using this from a module, never require a blocking wait*, but let + the caller decide whether the call will block or not (for example, + by coupling condition variables with some kind of request results + and supporting callbacks so the caller knows that getting the result + will not block, while still supporting blocking waits if the caller + so desires). + + Another reason *never* to "->recv" in a module is that you cannot + sensibly have two "->recv"'s in parallel, as that would require + multiple interpreters or coroutines/threads, none of which + "AnyEvent" can supply. + + The Coro module, however, *can* and *does* supply coroutines and, in + fact, Coro::AnyEvent replaces AnyEvent's condvars by coroutine-safe + versions and also integrates coroutines into AnyEvent, making + blocking "->recv" calls perfectly safe as long as they are done from + another coroutine (one that doesn't run the event loop). + + You can ensure that "-recv" never blocks by setting a callback and + only calling "->recv" from within that callback (or at a later + time). This will work even when the event loop does not support + blocking waits otherwise. + + $bool = $cv->ready + Returns true when the condition is "true", i.e. whether "send" or + "croak" have been called. + + $cb = $cv->cb ($cb->($cv)) + This is a mutator function that returns the callback set and + optionally replaces it before doing so. + + The callback will be called when the condition becomes "true", i.e. + when "send" or "croak" are called, with the only argument being the + condition variable itself. Calling "recv" inside the callback or at + any later time is guaranteed not to block. + +GLOBAL VARIABLES AND FUNCTIONS + $AnyEvent::MODEL + Contains "undef" until the first watcher is being created. Then it + contains the event model that is being used, which is the name of + the Perl class implementing the model. This class is usually one of + the "AnyEvent::Impl:xxx" modules, but can be any other class in the + case AnyEvent has been extended at runtime (e.g. in *rxvt-unicode*). + + The known classes so far are: + + AnyEvent::Impl::EV based on EV (an interface to libev, best choice). + AnyEvent::Impl::Event based on Event, second best choice. + AnyEvent::Impl::Perl pure-perl implementation, fast and portable. + AnyEvent::Impl::Glib based on Glib, third-best choice. + AnyEvent::Impl::Tk based on Tk, very bad choice. + AnyEvent::Impl::Qt based on Qt, cannot be autoprobed (see its docs). + AnyEvent::Impl::EventLib based on Event::Lib, leaks memory and worse. + AnyEvent::Impl::POE based on POE, not generic enough for full support. + + There is no support for WxWidgets, as WxWidgets has no support for + watching file handles. However, you can use WxWidgets through the + POE Adaptor, as POE has a Wx backend that simply polls 20 times per + second, which was considered to be too horrible to even consider for + AnyEvent. Likewise, other POE backends can be used by AnyEvent by + using it's adaptor. + + AnyEvent knows about Prima and Wx and will try to use POE when + autodetecting them. + + AnyEvent::detect + Returns $AnyEvent::MODEL, forcing autodetection of the event model + if necessary. You should only call this function right before you + would have created an AnyEvent watcher anyway, that is, as late as + possible at runtime. + + $guard = AnyEvent::post_detect { BLOCK } + Arranges for the code block to be executed as soon as the event + model is autodetected (or immediately if this has already happened). + + If called in scalar or list context, then it creates and returns an + object that automatically removes the callback again when it is + destroyed. See Coro::BDB for a case where this is useful. + + @AnyEvent::post_detect + If there are any code references in this array (you can "push" to it + before or after loading AnyEvent), then they will called directly + after the event loop has been chosen. + + You should check $AnyEvent::MODEL before adding to this array, + though: if it contains a true value then the event loop has already + been detected, and the array will be ignored. + + Best use "AnyEvent::post_detect { BLOCK }" instead. + +WHAT TO DO IN A MODULE + As a module author, you should "use AnyEvent" and call AnyEvent methods + freely, but you should not load a specific event module or rely on it. + + Be careful when you create watchers in the module body - AnyEvent will + decide which event module to use as soon as the first method is called, + so by calling AnyEvent in your module body you force the user of your + module to load the event module first. + + Never call "->recv" on a condition variable unless you *know* that the + "->send" method has been called on it already. This is because it will + stall the whole program, and the whole point of using events is to stay + interactive. + + It is fine, however, to call "->recv" when the user of your module + requests it (i.e. if you create a http request object ad have a method + called "results" that returns the results, it should call "->recv" + freely, as the user of your module knows what she is doing. always). + +WHAT TO DO IN THE MAIN PROGRAM + There will always be a single main program - the only place that should + dictate which event model to use. + + If it doesn't care, it can just "use AnyEvent" and use it itself, or not + do anything special (it does not need to be event-based) and let + AnyEvent decide which implementation to chose if some module relies on + it. + + If the main program relies on a specific event model - for example, in + Gtk2 programs you have to rely on the Glib module - you should load the + event module before loading AnyEvent or any module that uses it: + generally speaking, you should load it as early as possible. The reason + is that modules might create watchers when they are loaded, and AnyEvent + will decide on the event model to use as soon as it creates watchers, + and it might chose the wrong one unless you load the correct one + yourself. + + You can chose to use a pure-perl implementation by loading the + "AnyEvent::Impl::Perl" module, which gives you similar behaviour + everywhere, but letting AnyEvent chose the model is generally better. + + MAINLOOP EMULATION + Sometimes (often for short test scripts, or even standalone programs who + only want to use AnyEvent), you do not want to run a specific event + loop. + + In that case, you can use a condition variable like this: + + AnyEvent->condvar->recv; + + This has the effect of entering the event loop and looping forever. + + Note that usually your program has some exit condition, in which case it + is better to use the "traditional" approach of storing a condition + variable somewhere, waiting for it, and sending it when the program + should exit cleanly. + +OTHER MODULES + The following is a non-exhaustive list of additional modules that use + AnyEvent and can therefore be mixed easily with other AnyEvent modules + in the same program. Some of the modules come with AnyEvent, some are + available via CPAN. + + AnyEvent::Util + Contains various utility functions that replace often-used but + blocking functions such as "inet_aton" by event-/callback-based + versions. + + AnyEvent::Socket + Provides various utility functions for (internet protocol) sockets, + addresses and name resolution. Also functions to create non-blocking + tcp connections or tcp servers, with IPv6 and SRV record support and + more. + + AnyEvent::Handle + Provide read and write buffers, manages watchers for reads and + writes, supports raw and formatted I/O, I/O queued and fully + transparent and non-blocking SSL/TLS. + + AnyEvent::DNS + Provides rich asynchronous DNS resolver capabilities. + + AnyEvent::HTTP + A simple-to-use HTTP library that is capable of making a lot of + concurrent HTTP requests. + + AnyEvent::HTTPD + Provides a simple web application server framework. + + AnyEvent::FastPing + The fastest ping in the west. + + AnyEvent::DBI + Executes DBI requests asynchronously in a proxy process. + + AnyEvent::AIO + Truly asynchronous I/O, should be in the toolbox of every event + programmer. AnyEvent::AIO transparently fuses IO::AIO and AnyEvent + together. + + AnyEvent::BDB + Truly asynchronous Berkeley DB access. AnyEvent::BDB transparently + fuses BDB and AnyEvent together. + + AnyEvent::GPSD + A non-blocking interface to gpsd, a daemon delivering GPS + information. + + AnyEvent::IGS + A non-blocking interface to the Internet Go Server protocol (used by + App::IGS). + + AnyEvent::IRC + AnyEvent based IRC client module family (replacing the older + Net::IRC3). + + Net::XMPP2 + AnyEvent based XMPP (Jabber protocol) module family. + + Net::FCP + AnyEvent-based implementation of the Freenet Client Protocol, + birthplace of AnyEvent. + + Event::ExecFlow + High level API for event-based execution flow control. + + Coro + Has special support for AnyEvent via Coro::AnyEvent. + + IO::Lambda + The lambda approach to I/O - don't ask, look there. Can use + AnyEvent. + +ERROR AND EXCEPTION HANDLING + In general, AnyEvent does not do any error handling - it relies on the + caller to do that if required. The AnyEvent::Strict module (see also the + "PERL_ANYEVENT_STRICT" environment variable, below) provides strict + checking of all AnyEvent methods, however, which is highly useful during + development. + + As for exception handling (i.e. runtime errors and exceptions thrown + while executing a callback), this is not only highly event-loop + specific, but also not in any way wrapped by this module, as this is the + job of the main program. + + The pure perl event loop simply re-throws the exception (usually within + "condvar->recv"), the Event and EV modules call "$Event/EV::DIED->()", + Glib uses "install_exception_handler" and so on. -EXAMPLE - The following program uses an io watcher to read data from stdin, a - timer to display a message once per second, and a condvar to exit the - program when the user enters quit: +ENVIRONMENT VARIABLES + The following environment variables are used by this module or its + submodules. + + Note that AnyEvent will remove *all* environment variables starting with + "PERL_ANYEVENT_" from %ENV when it is loaded while taint mode is + enabled. + + "PERL_ANYEVENT_VERBOSE" + By default, AnyEvent will be completely silent except in fatal + conditions. You can set this environment variable to make AnyEvent + more talkative. + + When set to 1 or higher, causes AnyEvent to warn about unexpected + conditions, such as not being able to load the event model specified + by "PERL_ANYEVENT_MODEL". + + When set to 2 or higher, cause AnyEvent to report to STDERR which + event model it chooses. + + "PERL_ANYEVENT_STRICT" + AnyEvent does not do much argument checking by default, as thorough + argument checking is very costly. Setting this variable to a true + value will cause AnyEvent to load "AnyEvent::Strict" and then to + thoroughly check the arguments passed to most method calls. If it + finds any problems it will croak. + + In other words, enables "strict" mode. + + Unlike "use strict", it is definitely recommended ot keep it off in + production. Keeping "PERL_ANYEVENT_STRICT=1" in your environment + while developing programs can be very useful, however. + + "PERL_ANYEVENT_MODEL" + This can be used to specify the event model to be used by AnyEvent, + before auto detection and -probing kicks in. It must be a string + consisting entirely of ASCII letters. The string "AnyEvent::Impl::" + gets prepended and the resulting module name is loaded and if the + load was successful, used as event model. If it fails to load + AnyEvent will proceed with auto detection and -probing. + + This functionality might change in future versions. + + For example, to force the pure perl model (AnyEvent::Impl::Perl) you + could start your program like this: + + PERL_ANYEVENT_MODEL=Perl perl ... + + "PERL_ANYEVENT_PROTOCOLS" + Used by both AnyEvent::DNS and AnyEvent::Socket to determine + preferences for IPv4 or IPv6. The default is unspecified (and might + change, or be the result of auto probing). + + Must be set to a comma-separated list of protocols or address + families, current supported: "ipv4" and "ipv6". Only protocols + mentioned will be used, and preference will be given to protocols + mentioned earlier in the list. + + This variable can effectively be used for denial-of-service attacks + against local programs (e.g. when setuid), although the impact is + likely small, as the program has to handle conenction and other + failures anyways. + + Examples: "PERL_ANYEVENT_PROTOCOLS=ipv4,ipv6" - prefer IPv4 over + IPv6, but support both and try to use both. + "PERL_ANYEVENT_PROTOCOLS=ipv4" - only support IPv4, never try to + resolve or contact IPv6 addresses. + "PERL_ANYEVENT_PROTOCOLS=ipv6,ipv4" support either IPv4 or IPv6, but + prefer IPv6 over IPv4. + + "PERL_ANYEVENT_EDNS0" + Used by AnyEvent::DNS to decide whether to use the EDNS0 extension + for DNS. This extension is generally useful to reduce DNS traffic, + but some (broken) firewalls drop such DNS packets, which is why it + is off by default. + + Setting this variable to 1 will cause AnyEvent::DNS to announce + EDNS0 in its DNS requests. + + "PERL_ANYEVENT_MAX_FORKS" + The maximum number of child processes that + "AnyEvent::Util::fork_call" will create in parallel. + +SUPPLYING YOUR OWN EVENT MODEL INTERFACE + This is an advanced topic that you do not normally need to use AnyEvent + in a module. This section is only of use to event loop authors who want + to provide AnyEvent compatibility. + + If you need to support another event library which isn't directly + supported by AnyEvent, you can supply your own interface to it by + pushing, before the first watcher gets created, the package name of the + event module and the package name of the interface to use onto + @AnyEvent::REGISTRY. You can do that before and even without loading + AnyEvent, so it is reasonably cheap. + + Example: + + push @AnyEvent::REGISTRY, [urxvt => urxvt::anyevent::]; + + This tells AnyEvent to (literally) use the "urxvt::anyevent::" + package/class when it finds the "urxvt" package/module is already + loaded. + + When AnyEvent is loaded and asked to find a suitable event model, it + will first check for the presence of urxvt by trying to "use" the + "urxvt::anyevent" module. + + The class should provide implementations for all watcher types. See + AnyEvent::Impl::EV (source code), AnyEvent::Impl::Glib (Source code) and + so on for actual examples. Use "perldoc -m AnyEvent::Impl::Glib" to see + the sources. + + If you don't provide "signal" and "child" watchers than AnyEvent will + provide suitable (hopefully) replacements. + + The above example isn't fictitious, the *rxvt-unicode* (a.k.a. urxvt) + terminal emulator uses the above line as-is. An interface isn't included + in AnyEvent because it doesn't make sense outside the embedded + interpreter inside *rxvt-unicode*, and it is updated and maintained as + part of the *rxvt-unicode* distribution. + + *rxvt-unicode* also cheats a bit by not providing blocking access to + condition variables: code blocking while waiting for a condition will + "die". This still works with most modules/usages, and blocking calls + must not be done in an interactive application, so it makes sense. + +EXAMPLE PROGRAM + The following program uses an I/O watcher to read data from STDIN, a + timer to display a message once per second, and a condition variable to + quit the program when the user enters quit: use AnyEvent; my $cv = AnyEvent->condvar; - my $io_watcher = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub { - warn "io event <$_[0]>\n"; # will always output - chomp (my $input = ); # read a line - warn "read: $input\n"; # output what has been read - $cv->broadcast if $input =~ /^q/i; # quit program if /^q/i - }); + my $io_watcher = AnyEvent->io ( + fh => \*STDIN, + poll => 'r', + cb => sub { + warn "io event <$_[0]>\n"; # will always output + chomp (my $input = ); # read a line + warn "read: $input\n"; # output what has been read + $cv->send if $input =~ /^q/i; # quit program if /^q/i + }, + ); my $time_watcher; # can only be used once @@ -91,7 +1040,7 @@ new_timer; # create first timer - $cv->wait; # wait until user enters /^q/i + $cv->recv; # wait until user enters /^q/i REAL-WORLD EXAMPLE Consider the Net::FCP module. It features (among others) the following @@ -150,13 +1099,13 @@ $txn->{w} = AnyEvent->io (fh => $txn->{fh}, poll => 'r', cb => sub { $txn->fh_ready_r }); Again, "fh_ready_r" waits till all data has arrived, and then stores the - result and signals any possible waiters that the request ahs finished: + result and signals any possible waiters that the request has finished: sysread $txn->{fh}, $txn->{buf}, length $txn->{$buf}; if (end-of-file or data complete) { $txn->{result} = $txn->{buf}; - $txn->{finished}->broadcast; + $txn->{finished}->send; $txb->{cb}->($txn) of $txn->{cb}; # also call callback } @@ -164,12 +1113,12 @@ request was already finished, it doesn't wait, of course, and returns the data: - $txn->{finished}->wait; + $txn->{finished}->recv; return $txn->{result}; The actual code goes further and collects all errors ("die"s, - exceptions) that occured during request processing. The "result" method - detects wether an exception as thrown (it is stored inside the $txn + exceptions) that occurred during request processing. The "result" method + detects whether an exception as thrown (it is stored inside the $txn object) and just throws the exception, which means connection errors and other problems get reported tot he code that tries to use the result, not in a random callback. @@ -180,7 +1129,7 @@ my $data = $fcp->client_get ($url); - 2. Blocking, but parallelizing: + 2. Blocking, but running in parallel: my @datas = map $_->result, map $fcp->txn_client_get ($_), @@ -189,9 +1138,9 @@ Both blocking examples work without the module user having to know anything about events. - 3a. Event-based in a main program, using any support Event module: + 3a. Event-based in a main program, using any supported event module: - use Event; + use EV; $fcp->txn_client_get ($url)->cb (sub { my $txn = shift; @@ -199,7 +1148,7 @@ ... }); - Event::loop; + EV::loop; 3b. The module user could use AnyEvent, too: @@ -209,17 +1158,389 @@ $fcp->txn_client_get ($url)->cb (sub { ... - $quit->broadcast; + $quit->send; }); - $quit->wait; + $quit->recv; + +BENCHMARKS + To give you an idea of the performance and overheads that AnyEvent adds + over the event loops themselves and to give you an impression of the + speed of various event loops I prepared some benchmarks. + + BENCHMARKING ANYEVENT OVERHEAD + Here is a benchmark of various supported event models used natively and + through AnyEvent. The benchmark creates a lot of timers (with a zero + timeout) and I/O watchers (watching STDOUT, a pty, to become writable, + which it is), lets them fire exactly once and destroys them again. + + Source code for this benchmark is found as eg/bench in the AnyEvent + distribution. + + Explanation of the columns + *watcher* is the number of event watchers created/destroyed. Since + different event models feature vastly different performances, each event + loop was given a number of watchers so that overall runtime is + acceptable and similar between tested event loop (and keep them from + crashing): Glib would probably take thousands of years if asked to + process the same number of watchers as EV in this benchmark. + + *bytes* is the number of bytes (as measured by the resident set size, + RSS) consumed by each watcher. This method of measuring captures both C + and Perl-based overheads. + + *create* is the time, in microseconds (millionths of seconds), that it + takes to create a single watcher. The callback is a closure shared + between all watchers, to avoid adding memory overhead. That means + closure creation and memory usage is not included in the figures. + + *invoke* is the time, in microseconds, used to invoke a simple callback. + The callback simply counts down a Perl variable and after it was invoked + "watcher" times, it would "->send" a condvar once to signal the end of + this phase. + + *destroy* is the time, in microseconds, that it takes to destroy a + single watcher. + + Results + name watchers bytes create invoke destroy comment + EV/EV 400000 224 0.47 0.35 0.27 EV native interface + EV/Any 100000 224 2.88 0.34 0.27 EV + AnyEvent watchers + CoroEV/Any 100000 224 2.85 0.35 0.28 coroutines + Coro::Signal + Perl/Any 100000 452 4.13 0.73 0.95 pure perl implementation + Event/Event 16000 517 32.20 31.80 0.81 Event native interface + Event/Any 16000 590 35.85 31.55 1.06 Event + AnyEvent watchers + Glib/Any 16000 1357 102.33 12.31 51.00 quadratic behaviour + Tk/Any 2000 1860 27.20 66.31 14.00 SEGV with >> 2000 watchers + POE/Event 2000 6328 109.99 751.67 14.02 via POE::Loop::Event + POE/Select 2000 6027 94.54 809.13 579.80 via POE::Loop::Select + + Discussion + The benchmark does *not* measure scalability of the event loop very + well. For example, a select-based event loop (such as the pure perl one) + can never compete with an event loop that uses epoll when the number of + file descriptors grows high. In this benchmark, all events become ready + at the same time, so select/poll-based implementations get an unnatural + speed boost. + + Also, note that the number of watchers usually has a nonlinear effect on + overall speed, that is, creating twice as many watchers doesn't take + twice the time - usually it takes longer. This puts event loops tested + with a higher number of watchers at a disadvantage. + + To put the range of results into perspective, consider that on the + benchmark machine, handling an event takes roughly 1600 CPU cycles with + EV, 3100 CPU cycles with AnyEvent's pure perl loop and almost 3000000 + CPU cycles with POE. + + "EV" is the sole leader regarding speed and memory use, which are both + maximal/minimal, respectively. Even when going through AnyEvent, it uses + far less memory than any other event loop and is still faster than Event + natively. + + The pure perl implementation is hit in a few sweet spots (both the + constant timeout and the use of a single fd hit optimisations in the + perl interpreter and the backend itself). Nevertheless this shows that + it adds very little overhead in itself. Like any select-based backend + its performance becomes really bad with lots of file descriptors (and + few of them active), of course, but this was not subject of this + benchmark. + + The "Event" module has a relatively high setup and callback invocation + cost, but overall scores in on the third place. + + "Glib"'s memory usage is quite a bit higher, but it features a faster + callback invocation and overall ends up in the same class as "Event". + However, Glib scales extremely badly, doubling the number of watchers + increases the processing time by more than a factor of four, making it + completely unusable when using larger numbers of watchers (note that + only a single file descriptor was used in the benchmark, so + inefficiencies of "poll" do not account for this). + + The "Tk" adaptor works relatively well. The fact that it crashes with + more than 2000 watchers is a big setback, however, as correctness takes + precedence over speed. Nevertheless, its performance is surprising, as + the file descriptor is dup()ed for each watcher. This shows that the + dup() employed by some adaptors is not a big performance issue (it does + incur a hidden memory cost inside the kernel which is not reflected in + the figures above). + + "POE", regardless of underlying event loop (whether using its pure perl + select-based backend or the Event module, the POE-EV backend couldn't be + tested because it wasn't working) shows abysmal performance and memory + usage with AnyEvent: Watchers use almost 30 times as much memory as EV + watchers, and 10 times as much memory as Event (the high memory + requirements are caused by requiring a session for each watcher). + Watcher invocation speed is almost 900 times slower than with AnyEvent's + pure perl implementation. + + The design of the POE adaptor class in AnyEvent can not really account + for the performance issues, though, as session creation overhead is + small compared to execution of the state machine, which is coded pretty + optimally within AnyEvent::Impl::POE (and while everybody agrees that + using multiple sessions is not a good approach, especially regarding + memory usage, even the author of POE could not come up with a faster + design). + + Summary + * Using EV through AnyEvent is faster than any other event loop (even + when used without AnyEvent), but most event loops have acceptable + performance with or without AnyEvent. + + * The overhead AnyEvent adds is usually much smaller than the overhead + of the actual event loop, only with extremely fast event loops such + as EV adds AnyEvent significant overhead. + + * You should avoid POE like the plague if you want performance or + reasonable memory usage. + + BENCHMARKING THE LARGE SERVER CASE + This benchmark actually benchmarks the event loop itself. It works by + creating a number of "servers": each server consists of a socket pair, a + timeout watcher that gets reset on activity (but never fires), and an + I/O watcher waiting for input on one side of the socket. Each time the + socket watcher reads a byte it will write that byte to a random other + "server". + + The effect is that there will be a lot of I/O watchers, only part of + which are active at any one point (so there is a constant number of + active fds for each loop iteration, but which fds these are is random). + The timeout is reset each time something is read because that reflects + how most timeouts work (and puts extra pressure on the event loops). + + In this benchmark, we use 10000 socket pairs (20000 sockets), of which + 100 (1%) are active. This mirrors the activity of large servers with + many connections, most of which are idle at any one point in time. + + Source code for this benchmark is found as eg/bench2 in the AnyEvent + distribution. + + Explanation of the columns + *sockets* is the number of sockets, and twice the number of "servers" + (as each server has a read and write socket end). + + *create* is the time it takes to create a socket pair (which is + nontrivial) and two watchers: an I/O watcher and a timeout watcher. + + *request*, the most important value, is the time it takes to handle a + single "request", that is, reading the token from the pipe and + forwarding it to another server. This includes deleting the old timeout + and creating a new one that moves the timeout into the future. + + Results + name sockets create request + EV 20000 69.01 11.16 + Perl 20000 73.32 35.87 + Event 20000 212.62 257.32 + Glib 20000 651.16 1896.30 + POE 20000 349.67 12317.24 uses POE::Loop::Event + + Discussion + This benchmark *does* measure scalability and overall performance of the + particular event loop. + + EV is again fastest. Since it is using epoll on my system, the setup + time is relatively high, though. + + Perl surprisingly comes second. It is much faster than the C-based event + loops Event and Glib. + + Event suffers from high setup time as well (look at its code and you + will understand why). Callback invocation also has a high overhead + compared to the "$_->() for .."-style loop that the Perl event loop + uses. Event uses select or poll in basically all documented + configurations. + + Glib is hit hard by its quadratic behaviour w.r.t. many watchers. It + clearly fails to perform with many filehandles or in busy servers. + + POE is still completely out of the picture, taking over 1000 times as + long as EV, and over 100 times as long as the Perl implementation, even + though it uses a C-based event loop in this case. + + Summary + * The pure perl implementation performs extremely well. + + * Avoid Glib or POE in large projects where performance matters. + + BENCHMARKING SMALL SERVERS + While event loops should scale (and select-based ones do not...) even to + large servers, most programs we (or I :) actually write have only a few + I/O watchers. + + In this benchmark, I use the same benchmark program as in the large + server case, but it uses only eight "servers", of which three are active + at any one time. This should reflect performance for a small server + relatively well. + + The columns are identical to the previous table. + + Results + name sockets create request + EV 16 20.00 6.54 + Perl 16 25.75 12.62 + Event 16 81.27 35.86 + Glib 16 32.63 15.48 + POE 16 261.87 276.28 uses POE::Loop::Event + + Discussion + The benchmark tries to test the performance of a typical small server. + While knowing how various event loops perform is interesting, keep in + mind that their overhead in this case is usually not as important, due + to the small absolute number of watchers (that is, you need efficiency + and speed most when you have lots of watchers, not when you only have a + few of them). + + EV is again fastest. + + Perl again comes second. It is noticeably faster than the C-based event + loops Event and Glib, although the difference is too small to really + matter. + + POE also performs much better in this case, but is is still far behind + the others. + + Summary + * C-based event loops perform very well with small number of watchers, + as the management overhead dominates. + + THE IO::Lambda BENCHMARK + Recently I was told about the benchmark in the IO::Lambda manpage, which + could be misinterpreted to make AnyEvent look bad. In fact, the + benchmark simply compares IO::Lambda with POE, and IO::Lambda looks + better (which shouldn't come as a surprise to anybody). As such, the + benchmark is fine, and shows that the AnyEvent backend from IO::Lambda + isn't very optimal. But how would AnyEvent compare when used without the + extra baggage? To explore this, I wrote the equivalent benchmark for + AnyEvent. + + The benchmark itself creates an echo-server, and then, for 500 times, + connects to the echo server, sends a line, waits for the reply, and then + creates the next connection. This is a rather bad benchmark, as it + doesn't test the efficiency of the framework, but it is a benchmark + nevertheless. + + name runtime + Lambda/select 0.330 sec + + optimized 0.122 sec + Lambda/AnyEvent 0.327 sec + + optimized 0.138 sec + Raw sockets/select 0.077 sec + POE/select, components 0.662 sec + POE/select, raw sockets 0.226 sec + POE/select, optimized 0.404 sec + + AnyEvent/select/nb 0.085 sec + AnyEvent/EV/nb 0.068 sec + +state machine 0.134 sec + + The benchmark is also a bit unfair (my fault) - the IO::Lambda + benchmarks actually make blocking connects and use 100% blocking I/O, + defeating the purpose of an event-based solution. All of the newly + written AnyEvent benchmarks use 100% non-blocking connects (using + AnyEvent::Socket::tcp_connect and the asynchronous pure perl DNS + resolver), so AnyEvent is at a disadvantage here as non-blocking + connects generally require a lot more bookkeeping and event handling + than blocking connects (which involve a single syscall only). + + The last AnyEvent benchmark additionally uses AnyEvent::Handle, which + offers similar expressive power as POE and IO::Lambda (using + conventional Perl syntax), which means both the echo server and the + client are 100% non-blocking w.r.t. I/O, further placing it at a + disadvantage. + + As you can see, AnyEvent + EV even beats the hand-optimised "raw sockets + benchmark", while AnyEvent + its pure perl backend easily beats + IO::Lambda and POE. + + And even the 100% non-blocking version written using the high-level (and + slow :) AnyEvent::Handle abstraction beats both POE and IO::Lambda, even + thought it does all of DNS, tcp-connect and socket I/O in a non-blocking + way. + + The two AnyEvent benchmarks can be found as eg/ae0.pl and eg/ae2.pl in + the AnyEvent distribution, the remaining benchmarks are part of the + IO::lambda distribution and were used without any changes. + +SIGNALS + AnyEvent currently installs handlers for these signals: + + SIGCHLD + A handler for "SIGCHLD" is installed by AnyEvent's child watcher + emulation for event loops that do not support them natively. Also, + some event loops install a similar handler. + + SIGPIPE + A no-op handler is installed for "SIGPIPE" when $SIG{PIPE} is + "undef" when AnyEvent gets loaded. + + The rationale for this is that AnyEvent users usually do not really + depend on SIGPIPE delivery (which is purely an optimisation for + shell use, or badly-written programs), but "SIGPIPE" can cause + spurious and rare program exits as a lot of people do not expect + "SIGPIPE" when writing to some random socket. + + The rationale for installing a no-op handler as opposed to ignoring + it is that this way, the handler will be restored to defaults on + exec. + + Feel free to install your own handler, or reset it to defaults. + +FORK + Most event libraries are not fork-safe. The ones who are usually are + because they rely on inefficient but fork-safe "select" or "poll" calls. + Only EV is fully fork-aware. + + If you have to fork, you must either do so *before* creating your first + watcher OR you must not use AnyEvent at all in the child. + +SECURITY CONSIDERATIONS + AnyEvent can be forced to load any event model via + $ENV{PERL_ANYEVENT_MODEL}. While this cannot (to my knowledge) be used + to execute arbitrary code or directly gain access, it can easily be used + to make the program hang or malfunction in subtle ways, as AnyEvent + watchers will not be active when the program uses a different event + model than specified in the variable. + + You can make AnyEvent completely ignore this variable by deleting it + before the first watcher gets created, e.g. with a "BEGIN" block: + + BEGIN { delete $ENV{PERL_ANYEVENT_MODEL} } + + use AnyEvent; + + Similar considerations apply to $ENV{PERL_ANYEVENT_VERBOSE}, as that can + be used to probe what backend is used and gain other information (which + is probably even less useful to an attacker than PERL_ANYEVENT_MODEL), + and $ENV{PERL_ANYEVENT_STRICT}. + +BUGS + Perl 5.8 has numerous memleaks that sometimes hit this module and are + hard to work around. If you suffer from memleaks, first upgrade to Perl + 5.10 and check wether the leaks still show up. (Perl 5.10.0 has other + annoying memleaks, such as leaking on "map" and "grep" but it is usually + not as pronounced). SEE ALSO - Event modules: Coro::Event, Coro, Event, Glib::Event, Glib. + Utility functions: AnyEvent::Util. + + Event modules: EV, EV::Glib, Glib::EV, Event, Glib::Event, Glib, Tk, + Event::Lib, Qt, POE. + + Implementations: AnyEvent::Impl::EV, AnyEvent::Impl::Event, + AnyEvent::Impl::Glib, AnyEvent::Impl::Tk, AnyEvent::Impl::Perl, + AnyEvent::Impl::EventLib, AnyEvent::Impl::Qt, AnyEvent::Impl::POE. + + Non-blocking file handles, sockets, TCP clients and servers: + AnyEvent::Handle, AnyEvent::Socket. + + Asynchronous DNS: AnyEvent::DNS. - Implementations: AnyEvent::Impl::Coro, AnyEvent::Impl::Event, - AnyEvent::Impl::Glib, AnyEvent::Impl::Tk. + Coroutine support: Coro, Coro::AnyEvent, Coro::EV, Coro::Event, - Nontrivial usage example: Net::FCP. + Nontrivial usage examples: Net::FCP, Net::XMPP2, AnyEvent::DNS. +AUTHOR + Marc Lehmann + http://home.schmorp.de/