[ViewVC] Diff of: cvs/AnyEvent/README

Comparing AnyEvent/README (file contents):
Revision 1.38 by root, Sun Apr 26 18:12:53 2009 UTC vs.
Revision 1.41 by root, Fri Jun 26 06:33:17 2009 UTC

 NAME
     AnyEvent - provide framework for multiple event loops
-    EV, Event, Glib, Tk, Perl, Event::Lib, Qt, POE - various supported event
+    EV, Event, Glib, Tk, Perl, Event::Lib, Qt and POE are various supported
-    loops
+    event loops.
 SYNOPSIS
        use AnyEvent;
        # file descriptor readable
     There is a slight catch to child watchers, however: you usually start
     them *after* the child process was created, and this means the process
     could have exited already (and no SIGCHLD will be sent anymore).
-    Not all event models handle this correctly (POE doesn't), but even for
+    Not all event models handle this correctly (neither POE nor IO::Async
+    do, see their AnyEvent::Impl manpages for details), but even for event
-    event models that *do* handle this correctly, they usually need to be
+    models that *do* handle this correctly, they usually need to be loaded
-    loaded before the process exits (i.e. before you fork in the first
+    before the process exits (i.e. before you fork in the first place).
-    place).
+    AnyEvent's pure perl event loop handles all cases correctly regardless
+    of when you start the watcher.
     This means you cannot create a child watcher as the very first thing in
     an AnyEvent program, you *have* to create at least one watcher before
     you "fork" the child (alternatively, you can call "AnyEvent::detect").
     Example: fork a process and wait for it
        my $done = AnyEvent->condvar;
-   my $pid = fork or exit 5;
+       my $pid = fork or exit 5;
-   my $w = AnyEvent->child (
+       my $w = AnyEvent->child (
           pid => $pid,
           cb  => sub {
              my ($pid, $status) = @_;
              warn "pid $pid exited with status $status";
              $done->send;
           },
        );
-   # do something else, then wait for process exit
+       # do something else, then wait for process exit
        $done->recv;
   IDLE WATCHERS
     Sometimes there is a need to do something, but it is not so important to
     do it instantly, but only when there is nothing better to do. This
            AnyEvent::Impl::Tk        based on Tk, very bad choice.
            AnyEvent::Impl::Qt        based on Qt, cannot be autoprobed (see its docs).
            AnyEvent::Impl::EventLib  based on Event::Lib, leaks memory and worse.
            AnyEvent::Impl::POE       based on POE, not generic enough for full support.
+           # warning, support for IO::Async is only partial, as it is too broken
+           # and limited toe ven support the AnyEvent API. See AnyEvent::Impl::Async.
+           AnyEvent::Impl::IOAsync   based on IO::Async, cannot be autoprobed (see its docs).
         There is no support for WxWidgets, as WxWidgets has no support for
         watching file handles. However, you can use WxWidgets through the
         POE Adaptor, as POE has a Wx backend that simply polls 20 times per
         second, which was considered to be too horrible to even consider for
         AnyEvent. Likewise, other POE backends can be used by AnyEvent by
     "condvar->recv"), the Event and EV modules call "$Event/EV::DIED->()",
     Glib uses "install_exception_handler" and so on.
 ENVIRONMENT VARIABLES
     The following environment variables are used by this module or its
-    submodules:
+    submodules.
+    Note that AnyEvent will remove *all* environment variables starting with
+    "PERL_ANYEVENT_" from %ENV when it is loaded while taint mode is
+    enabled.
     "PERL_ANYEVENT_VERBOSE"
         By default, AnyEvent will be completely silent except in fatal
         conditions. You can set this environment variable to make AnyEvent
         more talkative.
     "PERL_ANYEVENT_STRICT"
         AnyEvent does not do much argument checking by default, as thorough
         argument checking is very costly. Setting this variable to a true
         value will cause AnyEvent to load "AnyEvent::Strict" and then to
         thoroughly check the arguments passed to most method calls. If it
-        finds any problems it will croak.
+        finds any problems, it will croak.
         In other words, enables "strict" mode.
-        Unlike "use strict", it is definitely recommended ot keep it off in
+        Unlike "use strict", it is definitely recommended to keep it off in
         production. Keeping "PERL_ANYEVENT_STRICT=1" in your environment
         while developing programs can be very useful, however.
     "PERL_ANYEVENT_MODEL"
         This can be used to specify the event model to be used by AnyEvent,
             EV/Any   100000   224   2.88   0.34    0.27 EV + AnyEvent watchers
         CoroEV/Any   100000   224   2.85   0.35    0.28 coroutines + Coro::Signal
           Perl/Any   100000   452   4.13   0.73    0.95 pure perl implementation
        Event/Event    16000   517  32.20  31.80    0.81 Event native interface
          Event/Any    16000   590  35.85  31.55    1.06 Event + AnyEvent watchers
+       IOAsync/Any    16000   989  38.10  32.77   11.13 via IO::Async::Loop::IO_Poll
+       IOAsync/Any    16000   990  37.59  29.50   10.61 via IO::Async::Loop::Epoll
           Glib/Any    16000  1357 102.33  12.31   51.00 quadratic behaviour
             Tk/Any     2000  1860  27.20  66.31   14.00 SEGV with >> 2000 watchers
          POE/Event     2000  6328 109.99 751.67   14.02 via POE::Loop::Event
         POE/Select     2000  6027  94.54 809.13  579.80 via POE::Loop::Select
     few of them active), of course, but this was not subject of this
     benchmark.
     The "Event" module has a relatively high setup and callback invocation
     cost, but overall scores in on the third place.
+    "IO::Async" performs admirably well, about on par with "Event", even
+    when using its pure perl backend.
     "Glib"'s memory usage is quite a bit higher, but it features a faster
     callback invocation and overall ends up in the same class as "Event".
     However, Glib scales extremely badly, doubling the number of watchers
     increases the processing time by more than a factor of four, making it
     single "request", that is, reading the token from the pipe and
     forwarding it to another server. This includes deleting the old timeout
     and creating a new one that moves the timeout into the future.
    Results
-        name sockets create  request
+         name sockets create  request
-          EV   20000  69.01    11.16
+           EV   20000  69.01    11.16
-        Perl   20000  73.32    35.87
+         Perl   20000  73.32    35.87
+      IOAsync   20000 157.00    98.14 epoll
+      IOAsync   20000 159.31   616.06 poll
-       Event   20000 212.62   257.32
+        Event   20000 212.62   257.32
-        Glib   20000 651.16  1896.30
+         Glib   20000 651.16  1896.30
-         POE   20000 349.67 12317.24 uses POE::Loop::Event
+          POE   20000 349.67 12317.24 uses POE::Loop::Event
    Discussion
     This benchmark *does* measure scalability and overall performance of the
     particular event loop.
     EV is again fastest. Since it is using epoll on my system, the setup
     time is relatively high, though.
     Perl surprisingly comes second. It is much faster than the C-based event
     loops Event and Glib.
+    IO::Async performs very well when using its epoll backend, and still
+    quite good compared to Glib when using its pure perl backend.
     Event suffers from high setup time as well (look at its code and you
     will understand why). Callback invocation also has a high overhead
     compared to the "$_->() for .."-style loop that the Perl event loop
     uses. Event uses select or poll in basically all documented
    Summary
     *   C-based event loops perform very well with small number of watchers,
         as the management overhead dominates.
+  THE IO::Lambda BENCHMARK
+    Recently I was told about the benchmark in the IO::Lambda manpage, which
+    could be misinterpreted to make AnyEvent look bad. In fact, the
+    benchmark simply compares IO::Lambda with POE, and IO::Lambda looks
+    better (which shouldn't come as a surprise to anybody). As such, the
+    benchmark is fine, and mostly shows that the AnyEvent backend from
+    IO::Lambda isn't very optimal. But how would AnyEvent compare when used
+    without the extra baggage? To explore this, I wrote the equivalent
+    benchmark for AnyEvent.
+    The benchmark itself creates an echo-server, and then, for 500 times,
+    connects to the echo server, sends a line, waits for the reply, and then
+    creates the next connection. This is a rather bad benchmark, as it
+    doesn't test the efficiency of the framework or much non-blocking I/O,
+    but it is a benchmark nevertheless.
+       name                    runtime
+       Lambda/select           0.330 sec
+          + optimized          0.122 sec
+       Lambda/AnyEvent         0.327 sec
+          + optimized          0.138 sec
+       Raw sockets/select      0.077 sec
+       POE/select, components  0.662 sec
+       POE/select, raw sockets 0.226 sec
+       POE/select, optimized   0.404 sec
+       AnyEvent/select/nb      0.085 sec
+       AnyEvent/EV/nb          0.068 sec
+          +state machine       0.134 sec
+    The benchmark is also a bit unfair (my fault): the IO::Lambda/POE
+    benchmarks actually make blocking connects and use 100% blocking I/O,
+    defeating the purpose of an event-based solution. All of the newly
+    written AnyEvent benchmarks use 100% non-blocking connects (using
+    AnyEvent::Socket::tcp_connect and the asynchronous pure perl DNS
+    resolver), so AnyEvent is at a disadvantage here, as non-blocking
+    connects generally require a lot more bookkeeping and event handling
+    than blocking connects (which involve a single syscall only).
+    The last AnyEvent benchmark additionally uses AnyEvent::Handle, which
+    offers similar expressive power as POE and IO::Lambda, using
+    conventional Perl syntax. This means that both the echo server and the
+    client are 100% non-blocking, further placing it at a disadvantage.
+    As you can see, the AnyEvent + EV combination even beats the
+    hand-optimised "raw sockets benchmark", while AnyEvent + its pure perl
+    backend easily beats IO::Lambda and POE.
+    And even the 100% non-blocking version written using the high-level (and
+    slow :) AnyEvent::Handle abstraction beats both POE and IO::Lambda by a
+    large margin, even though it does all of DNS, tcp-connect and socket I/O
+    in a non-blocking way.
+    The two AnyEvent benchmarks programs can be found as eg/ae0.pl and
+    eg/ae2.pl in the AnyEvent distribution, the remaining benchmarks are
+    part of the IO::lambda distribution and were used without any changes.
 SIGNALS
     AnyEvent currently installs handlers for these signals:
     SIGCHLD
         A handler for "SIGCHLD" is installed by AnyEvent's child watcher
         emulation for event loops that do not support them natively. Also,
         some event loops install a similar handler.
+        If, when AnyEvent is loaded, SIGCHLD is set to IGNORE, then AnyEvent
+        will reset it to default, to avoid losing child exit statuses.
     SIGPIPE
         A no-op handler is installed for "SIGPIPE" when $SIG{PIPE} is
         "undef" when AnyEvent gets loaded.
     You can make AnyEvent completely ignore this variable by deleting it
     before the first watcher gets created, e.g. with a "BEGIN" block:
        BEGIN { delete $ENV{PERL_ANYEVENT_MODEL} }
-   use AnyEvent;
+       use AnyEvent;
     Similar considerations apply to $ENV{PERL_ANYEVENT_VERBOSE}, as that can
     be used to probe what backend is used and gain other information (which
     is probably even less useful to an attacker than PERL_ANYEVENT_MODEL),
-    and $ENV{PERL_ANYEGENT_STRICT}.
+    and $ENV{PERL_ANYEVENT_STRICT}.
+    Note that AnyEvent will remove *all* environment variables starting with
+    "PERL_ANYEVENT_" from %ENV when it is loaded while taint mode is
+    enabled.
 BUGS
     Perl 5.8 has numerous memleaks that sometimes hit this module and are
     hard to work around. If you suffer from memleaks, first upgrade to Perl
     5.10 and check wether the leaks still show up. (Perl 5.10.0 has other

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/README (file contents): Revision 1.38 by root, Sun Apr 26 18:12:53 2009 UTC vs. Revision 1.41 by root, Fri Jun 26 06:33:17 2009 UTC

Diff Legend

Comparing AnyEvent/README (file contents):
Revision 1.38 by root, Sun Apr 26 18:12:53 2009 UTC vs.
Revision 1.41 by root, Fri Jun 26 06:33:17 2009 UTC