[ViewVC] Diff of: cvs/AnyEvent/README

Comparing AnyEvent/README (file contents):
Revision 1.47 by root, Mon Jul 20 22:39:57 2009 UTC vs.
Revision 1.79 by root, Tue Feb 26 02:08:34 2019 UTC

…		…
1	NAME	1	NAME
2	AnyEvent - events independent of event loop implementation	2	AnyEvent - the DBI of event loop programming
3		3
4	EV, Event, Glib, Tk, Perl, Event::Lib, Qt and POE are various supported	4	EV, Event, Glib, Tk, UV, Perl, Event::Lib, Irssi, rxvt-unicode,
5	event loops.	5	IO::Async, Qt, FLTK and POE are various supported event
		6	loops/environments.
6		7
7	SYNOPSIS	8	SYNOPSIS
8	use AnyEvent;	9	use AnyEvent;
9		10
		11	# if you prefer function calls, look at the AE manpage for
		12	# an alternative API.
		13
10	# file descriptor readable	14	# file handle or descriptor readable
11	my $w = AnyEvent->io (fh => $fh, poll => "r", cb => sub { ... });	15	my $w = AnyEvent->io (fh => $fh, poll => "r", cb => sub { ... });
12		16
13	# one-shot or repeating timers	17	# one-shot or repeating timers
14	my $w = AnyEvent->timer (after => $seconds, cb => sub { ... });	18	my $w = AnyEvent->timer (after => $seconds, cb => sub { ... });
15	my $w = AnyEvent->timer (after => $seconds, interval => $seconds, cb => ...	19	my $w = AnyEvent->timer (after => $seconds, interval => $seconds, cb => ...);
16		20
17	print AnyEvent->now; # prints current event loop time	21	print AnyEvent->now; # prints current event loop time
18	print AnyEvent->time; # think Time::HiRes::time or simply CORE::time.	22	print AnyEvent->time; # think Time::HiRes::time or simply CORE::time.
19		23
20	# POSIX signal	24	# POSIX signal
39	This manpage is mainly a reference manual. If you are interested in a	43	This manpage is mainly a reference manual. If you are interested in a
40	tutorial or some gentle introduction, have a look at the AnyEvent::Intro	44	tutorial or some gentle introduction, have a look at the AnyEvent::Intro
41	manpage.	45	manpage.
42		46
43	SUPPORT	47	SUPPORT
		48	An FAQ document is available as AnyEvent::FAQ.
		49
44	There is a mailinglist for discussing all things AnyEvent, and an IRC	50	There also is a mailinglist for discussing all things AnyEvent, and an
45	channel, too.	51	IRC channel, too.
46		52
47	See the AnyEvent project page at the Schmorpforge Ta-Sa Software	53	See the AnyEvent project page at the Schmorpforge Ta-Sa Software
48	Respository, at <http://anyevent.schmorp.de>, for more info.	54	Repository, at <http://anyevent.schmorp.de>, for more info.
49		55
50	WHY YOU SHOULD USE THIS MODULE (OR NOT)	56	WHY YOU SHOULD USE THIS MODULE (OR NOT)
51	Glib, POE, IO::Async, Event... CPAN offers event models by the dozen	57	Glib, POE, IO::Async, Event... CPAN offers event models by the dozen
52	nowadays. So what is different about AnyEvent?	58	nowadays. So what is different about AnyEvent?
53		59
…		…
68	module users into the same thing by forcing them to use the same event	74	module users into the same thing by forcing them to use the same event
69	model you use.	75	model you use.
70		76
71	For modules like POE or IO::Async (which is a total misnomer as it is	77	For modules like POE or IO::Async (which is a total misnomer as it is
72	actually doing all I/O synchronously...), using them in your module is	78	actually doing all I/O synchronously...), using them in your module is
73	like joining a cult: After you joined, you are dependent on them and you	79	like joining a cult: After you join, you are dependent on them and you
74	cannot use anything else, as they are simply incompatible to everything	80	cannot use anything else, as they are simply incompatible to everything
75	that isn't them. What's worse, all the potential users of your module	81	that isn't them. What's worse, all the potential users of your module
76	are also forced to use the same event loop you use.	82	are also forced to use the same event loop you use.
77		83
78	AnyEvent is different: AnyEvent + POE works fine. AnyEvent + Glib works	84	AnyEvent is different: AnyEvent + POE works fine. AnyEvent + Glib works
79	fine. AnyEvent + Tk works fine etc. etc. but none of these work together	85	fine. AnyEvent + Tk works fine etc. etc. but none of these work together
80	with the rest: POE + IO::Async? No go. Tk + Event? No go. Again: if your	86	with the rest: POE + EV? No go. Tk + Event? No go. Again: if your module
81	module uses one of those, every user of your module has to use it, too.	87	uses one of those, every user of your module has to use it, too. But if
82	But if your module uses AnyEvent, it works transparently with all event	88	your module uses AnyEvent, it works transparently with all event models
83	models it supports (including stuff like IO::Async, as long as those use	89	it supports (including stuff like IO::Async, as long as those use one of
84	one of the supported event loops. It is trivial to add new event loops	90	the supported event loops. It is easy to add new event loops to
85	to AnyEvent, too, so it is future-proof).	91	AnyEvent, too, so it is future-proof).
86		92
87	In addition to being free of having to use *the one and only true event	93	In addition to being free of having to use *the one and only true event
88	model*, AnyEvent also is free of bloat and policy: with POE or similar	94	model*, AnyEvent also is free of bloat and policy: with POE or similar
89	modules, you get an enormous amount of code and strict rules you have to	95	modules, you get an enormous amount of code and strict rules you have to
90	follow. AnyEvent, on the other hand, is lean and up to the point, by	96	follow. AnyEvent, on the other hand, is lean and to the point, by only
91	only offering the functionality that is necessary, in as thin as a	97	offering the functionality that is necessary, in as thin as a wrapper as
92	wrapper as technically possible.	98	technically possible.
93		99
94	Of course, AnyEvent comes with a big (and fully optional!) toolbox of	100	Of course, AnyEvent comes with a big (and fully optional!) toolbox of
95	useful functionality, such as an asynchronous DNS resolver, 100%	101	useful functionality, such as an asynchronous DNS resolver, 100%
96	non-blocking connects (even with TLS/SSL, IPv6 and on broken platforms	102	non-blocking connects (even with TLS/SSL, IPv6 and on broken platforms
97	such as Windows) and lots of real-world knowledge and workarounds for	103	such as Windows) and lots of real-world knowledge and workarounds for
…		…
100	Now, if you do want lots of policy (this can arguably be somewhat	106	Now, if you do want lots of policy (this can arguably be somewhat
101	useful) and you want to force your users to use the one and only event	107	useful) and you want to force your users to use the one and only event
102	model, you should not use this module.	108	model, you should not use this module.
103		109
104	DESCRIPTION	110	DESCRIPTION
105	AnyEvent provides an identical interface to multiple event loops. This	111	AnyEvent provides a uniform interface to various event loops. This
106	allows module authors to utilise an event loop without forcing module	112	allows module authors to use event loop functionality without forcing
107	users to use the same event loop (as only a single event loop can	113	module users to use a specific event loop implementation (since more
108	coexist peacefully at any one time).	114	than one event loop cannot coexist peacefully).
109		115
110	The interface itself is vaguely similar, but not identical to the Event	116	The interface itself is vaguely similar, but not identical to the Event
111	module.	117	module.
112		118
113	During the first call of any watcher-creation method, the module tries	119	During the first call of any watcher-creation method, the module tries
114	to detect the currently loaded event loop by probing whether one of the	120	to detect the currently loaded event loop by probing whether one of the
115	following modules is already loaded: EV, Event, Glib,	121	following modules is already loaded: EV, AnyEvent::Loop, Event, Glib,
116	AnyEvent::Impl::Perl, Tk, Event::Lib, Qt, POE. The first one found is	122	Tk, Event::Lib, Qt, POE. The first one found is used. If none are
117	used. If none are found, the module tries to load these modules	123	detected, the module tries to load the first four modules in the order
118	(excluding Tk, Event::Lib, Qt and POE as the pure perl adaptor should	124	given; but note that if EV is not available, the pure-perl
119	always succeed) in the order given. The first one that can be	125	AnyEvent::Loop should always work, so the other two are not normally
120	successfully loaded will be used. If, after this, still none could be	126	tried.
121	found, AnyEvent will fall back to a pure-perl event loop, which is not
122	very efficient, but should work everywhere.
123		127
124	Because AnyEvent first checks for modules that are already loaded,	128	Because AnyEvent first checks for modules that are already loaded,
125	loading an event model explicitly before first using AnyEvent will	129	loading an event model explicitly before first using AnyEvent will
126	likely make that model the default. For example:	130	likely make that model the default. For example:
127		131
…		…
129	use AnyEvent;	133	use AnyEvent;
130		134
131	# .. AnyEvent will likely default to Tk	135	# .. AnyEvent will likely default to Tk
132		136
133	The likely means that, if any module loads another event model and	137	The likely means that, if any module loads another event model and
134	starts using it, all bets are off. Maybe you should tell their authors	138	starts using it, all bets are off - this case should be very rare
135	to use AnyEvent so their modules work together with others seamlessly...	139	though, as very few modules hardcode event loops without announcing this
		140	very loudly.
136		141
137	The pure-perl implementation of AnyEvent is called	142	The pure-perl implementation of AnyEvent is called "AnyEvent::Loop".
138	"AnyEvent::Impl::Perl". Like other event modules you can load it	143	Like other event modules you can load it explicitly and enjoy the high
139	explicitly and enjoy the high availability of that event loop :)	144	availability of that event loop :)
140		145
141	WATCHERS	146	WATCHERS
142	AnyEvent has the central concept of a watcher, which is an object that	147	AnyEvent has the central concept of a watcher, which is an object that
143	stores relevant data for each kind of event you are waiting for, such as	148	stores relevant data for each kind of event you are waiting for, such as
144	the callback to call, the file handle to watch, etc.	149	the callback to call, the file handle to watch, etc.
…		…
148	callback when the event occurs (of course, only when the event model is	153	callback when the event occurs (of course, only when the event model is
149	in control).	154	in control).
150		155
151	Note that callbacks must not permanently change global variables	156	Note that callbacks must not permanently change global variables
152	potentially in use by the event loop (such as $_ or $[) and that	157	potentially in use by the event loop (such as $_ or $[) and that
153	callbacks must not "die". The former is good programming practise in	158	callbacks must not "die". The former is good programming practice in
154	Perl and the latter stems from the fact that exception handling differs	159	Perl and the latter stems from the fact that exception handling differs
155	widely between event loops.	160	widely between event loops.
156		161
157	To disable the watcher you have to destroy it (e.g. by setting the	162	To disable a watcher you have to destroy it (e.g. by setting the
158	variable you store it in to "undef" or otherwise deleting all references	163	variable you store it in to "undef" or otherwise deleting all references
159	to it).	164	to it).
160		165
161	All watchers are created by calling a method on the "AnyEvent" class.	166	All watchers are created by calling a method on the "AnyEvent" class.
162		167
163	Many watchers either are used with "recursion" (repeating timers for	168	Many watchers either are used with "recursion" (repeating timers for
164	example), or need to refer to their watcher object in other ways.	169	example), or need to refer to their watcher object in other ways.
165		170
166	An any way to achieve that is this pattern:	171	One way to achieve that is this pattern:
167		172
168	my $w; $w = AnyEvent->type (arg => value ..., cb => sub {	173	my $w; $w = AnyEvent->type (arg => value ..., cb => sub {
169	# you can use $w here, for example to undef it	174	# you can use $w here, for example to undef it
170	undef $w;	175	undef $w;
171	});	176	});
…		…
173	Note that "my $w; $w =" combination. This is necessary because in Perl,	178	Note that "my $w; $w =" combination. This is necessary because in Perl,
174	my variables are only visible after the statement in which they are	179	my variables are only visible after the statement in which they are
175	declared.	180	declared.
176		181
177	I/O WATCHERS	182	I/O WATCHERS
		183	$w = AnyEvent->io (
		184	fh => <filehandle_or_fileno>,
		185	poll => <"r" or "w">,
		186	cb => <callback>,
		187	);
		188
178	You can create an I/O watcher by calling the "AnyEvent->io" method with	189	You can create an I/O watcher by calling the "AnyEvent->io" method with
179	the following mandatory key-value pairs as arguments:	190	the following mandatory key-value pairs as arguments:
180		191
181	"fh" is the Perl file handle (or a naked file descriptor) to watch for	192	"fh" is the Perl file handle (or a naked file descriptor) to watch for
182	events (AnyEvent might or might not keep a reference to this file	193	events (AnyEvent might or might not keep a reference to this file
…		…
196		207
197	The I/O watcher might use the underlying file descriptor or a copy of	208	The I/O watcher might use the underlying file descriptor or a copy of
198	it. You must not close a file handle as long as any watcher is active on	209	it. You must not close a file handle as long as any watcher is active on
199	the underlying file descriptor.	210	the underlying file descriptor.
200		211
201	Some event loops issue spurious readyness notifications, so you should	212	Some event loops issue spurious readiness notifications, so you should
202	always use non-blocking calls when reading/writing from/to your file	213	always use non-blocking calls when reading/writing from/to your file
203	handles.	214	handles.
204		215
205	Example: wait for readability of STDIN, then read a line and disable the	216	Example: wait for readability of STDIN, then read a line and disable the
206	watcher.	217	watcher.
…		…
210	warn "read: $input\n";	221	warn "read: $input\n";
211	undef $w;	222	undef $w;
212	});	223	});
213		224
214	TIME WATCHERS	225	TIME WATCHERS
		226	$w = AnyEvent->timer (after => <seconds>, cb => <callback>);
		227
		228	$w = AnyEvent->timer (
		229	after => <fractional_seconds>,
		230	interval => <fractional_seconds>,
		231	cb => <callback>,
		232	);
		233
215	You can create a time watcher by calling the "AnyEvent->timer" method	234	You can create a time watcher by calling the "AnyEvent->timer" method
216	with the following mandatory arguments:	235	with the following mandatory arguments:
217		236
218	"after" specifies after how many seconds (fractional values are	237	"after" specifies after how many seconds (fractional values are
219	supported) the callback should be invoked. "cb" is the callback to	238	supported) the callback should be invoked. "cb" is the callback to
…		…
221		240
222	Although the callback might get passed parameters, their value and	241	Although the callback might get passed parameters, their value and
223	presence is undefined and you cannot rely on them. Portable AnyEvent	242	presence is undefined and you cannot rely on them. Portable AnyEvent
224	callbacks cannot use arguments passed to time watcher callbacks.	243	callbacks cannot use arguments passed to time watcher callbacks.
225		244
226	The callback will normally be invoked once only. If you specify another	245	The callback will normally be invoked only once. If you specify another
227	parameter, "interval", as a strictly positive number (> 0), then the	246	parameter, "interval", as a strictly positive number (> 0), then the
228	callback will be invoked regularly at that interval (in fractional	247	callback will be invoked regularly at that interval (in fractional
229	seconds) after the first invocation. If "interval" is specified with a	248	seconds) after the first invocation. If "interval" is specified with a
230	false value, then it is treated as if it were missing.	249	false value, then it is treated as if it were not specified at all.
231		250
232	The callback will be rescheduled before invoking the callback, but no	251	The callback will be rescheduled before invoking the callback, but no
233	attempt is done to avoid timer drift in most backends, so the interval	252	attempt is made to avoid timer drift in most backends, so the interval
234	is only approximate.	253	is only approximate.
235		254
236	Example: fire an event after 7.7 seconds.	255	Example: fire an event after 7.7 seconds.
237		256
238	my $w = AnyEvent->timer (after => 7.7, cb => sub {	257	my $w = AnyEvent->timer (after => 7.7, cb => sub {
…		…
244		263
245	Example 2: fire an event after 0.5 seconds, then roughly every second.	264	Example 2: fire an event after 0.5 seconds, then roughly every second.
246		265
247	my $w = AnyEvent->timer (after => 0.5, interval => 1, cb => sub {	266	my $w = AnyEvent->timer (after => 0.5, interval => 1, cb => sub {
248	warn "timeout\n";	267	warn "timeout\n";
249	};	268	});
250		269
251	TIMING ISSUES	270	TIMING ISSUES
252	There are two ways to handle timers: based on real time (relative, "fire	271	There are two ways to handle timers: based on real time (relative, "fire
253	in 10 seconds") and based on wallclock time (absolute, "fire at 12	272	in 10 seconds") and based on wallclock time (absolute, "fire at 12
254	o'clock").	273	o'clock").
255		274
256	While most event loops expect timers to specified in a relative way,	275	While most event loops expect timers to specified in a relative way,
257	they use absolute time internally. This makes a difference when your	276	they use absolute time internally. This makes a difference when your
258	clock "jumps", for example, when ntp decides to set your clock backwards	277	clock "jumps", for example, when ntp decides to set your clock backwards
259	from the wrong date of 2014-01-01 to 2008-01-01, a watcher that is	278	from the wrong date of 2014-01-01 to 2008-01-01, a watcher that is
260	supposed to fire "after" a second might actually take six years to	279	supposed to fire "after a second" might actually take six years to
261	finally fire.	280	finally fire.
262		281
263	AnyEvent cannot compensate for this. The only event loop that is	282	AnyEvent cannot compensate for this. The only event loop that is
264	conscious about these issues is EV, which offers both relative	283	conscious of these issues is EV, which offers both relative (ev_timer,
265	(ev_timer, based on true relative time) and absolute (ev_periodic, based	284	based on true relative time) and absolute (ev_periodic, based on
266	on wallclock time) timers.	285	wallclock time) timers.
267		286
268	AnyEvent always prefers relative timers, if available, matching the	287	AnyEvent always prefers relative timers, if available, matching the
269	AnyEvent API.	288	AnyEvent API.
270		289
271	AnyEvent has two additional methods that return the "current time":	290	AnyEvent has two additional methods that return the "current time":
…		…
290	*In almost all cases (in all cases if you don't care), this is the	309	*In almost all cases (in all cases if you don't care), this is the
291	function to call when you want to know the current time.*	310	function to call when you want to know the current time.*
292		311
293	This function is also often faster then "AnyEvent->time", and thus	312	This function is also often faster then "AnyEvent->time", and thus
294	the preferred method if you want some timestamp (for example,	313	the preferred method if you want some timestamp (for example,
295	AnyEvent::Handle uses this to update it's activity timeouts).	314	AnyEvent::Handle uses this to update its activity timeouts).
296		315
297	The rest of this section is only of relevance if you try to be very	316	The rest of this section is only of relevance if you try to be very
298	exact with your timing, you can skip it without bad conscience.	317	exact with your timing; you can skip it without a bad conscience.
299		318
300	For a practical example of when these times differ, consider	319	For a practical example of when these times differ, consider
301	Event::Lib and EV and the following set-up:	320	Event::Lib and EV and the following set-up:
302		321
303	The event loop is running and has just invoked one of your callback	322	The event loop is running and has just invoked one of your callbacks
304	at time=500 (assume no other callbacks delay processing). In your	323	at time=500 (assume no other callbacks delay processing). In your
305	callback, you wait a second by executing "sleep 1" (blocking the	324	callback, you wait a second by executing "sleep 1" (blocking the
306	process for a second) and then (at time=501) you create a relative	325	process for a second) and then (at time=501) you create a relative
307	timer that fires after three seconds.	326	timer that fires after three seconds.
308		327
…		…
329	can get whatever behaviour you want with any event loop, by taking	348	can get whatever behaviour you want with any event loop, by taking
330	the difference between "AnyEvent->time" and "AnyEvent->now" into	349	the difference between "AnyEvent->time" and "AnyEvent->now" into
331	account.	350	account.
332		351
333	AnyEvent->now_update	352	AnyEvent->now_update
334	Some event loops (such as EV or AnyEvent::Impl::Perl) cache the	353	Some event loops (such as EV or AnyEvent::Loop) cache the current
335	current time for each loop iteration (see the discussion of	354	time for each loop iteration (see the discussion of AnyEvent->now,
336	AnyEvent->now, above).	355	above).
337		356
338	When a callback runs for a long time (or when the process sleeps),	357	When a callback runs for a long time (or when the process sleeps),
339	then this "current" time will differ substantially from the real	358	then this "current" time will differ substantially from the real
340	time, which might affect timers and time-outs.	359	time, which might affect timers and time-outs.
341		360
342	When this is the case, you can call this method, which will update	361	When this is the case, you can call this method, which will update
343	the event loop's idea of "current time".	362	the event loop's idea of "current time".
344		363
		364	A typical example would be a script in a web server (e.g.
		365	"mod_perl") - when mod_perl executes the script, then the event loop
		366	will have the wrong idea about the "current time" (being potentially
		367	far in the past, when the script ran the last time). In that case
		368	you should arrange a call to "AnyEvent->now_update" each time the
		369	web server process wakes up again (e.g. at the start of your script,
		370	or in a handler).
		371
345	Note that updating the time might cause some events to be handled.	372	Note that updating the time might cause some events to be handled.
346		373
347	SIGNAL WATCHERS	374	SIGNAL WATCHERS
		375	$w = AnyEvent->signal (signal => <uppercase_signal_name>, cb => <callback>);
		376
348	You can watch for signals using a signal watcher, "signal" is the signal	377	You can watch for signals using a signal watcher, "signal" is the signal
349	name in uppercase and without any "SIG" prefix, "cb" is the Perl	378	name in uppercase and without any "SIG" prefix, "cb" is the Perl
350	callback to be invoked whenever a signal occurs.	379	callback to be invoked whenever a signal occurs.
351		380
352	Although the callback might get passed parameters, their value and	381	Although the callback might get passed parameters, their value and
…		…
368		397
369	Example: exit on SIGINT	398	Example: exit on SIGINT
370		399
371	my $w = AnyEvent->signal (signal => "INT", cb => sub { exit 1 });	400	my $w = AnyEvent->signal (signal => "INT", cb => sub { exit 1 });
372		401
		402	Restart Behaviour
		403	While restart behaviour is up to the event loop implementation, most
		404	will not restart syscalls (that includes Async::Interrupt and AnyEvent's
		405	pure perl implementation).
		406
		407	Safe/Unsafe Signals
		408	Perl signals can be either "safe" (synchronous to opcode handling) or
		409	"unsafe" (asynchronous) - the former might delay signal delivery
		410	indefinitely, the latter might corrupt your memory.
		411
		412	AnyEvent signal handlers are, in addition, synchronous to the event
		413	loop, i.e. they will not interrupt your running perl program but will
		414	only be called as part of the normal event handling (just like timer,
		415	I/O etc. callbacks, too).
		416
373	Signal Races, Delays and Workarounds	417	Signal Races, Delays and Workarounds
374	Many event loops (e.g. Glib, Tk, Qt, IO::Async) do not support attaching	418	Many event loops (e.g. Glib, Tk, Qt, IO::Async) do not support attaching
375	callbacks to signals in a generic way, which is a pity, as you cannot do	419	callbacks to signals in a generic way, which is a pity, as you cannot do
376	race-free signal handling in perl. AnyEvent will try to do it's best,	420	race-free signal handling in perl, requiring C libraries for this.
377	but in some cases, signals will be delayed. The maximum time a signal	421	AnyEvent will try to do its best, which means in some cases, signals
378	might be delayed is specified in $AnyEvent::MAX_SIGNAL_LATENCY (default:	422	will be delayed. The maximum time a signal might be delayed is 10
379	10 seconds). This variable can be changed only before the first signal	423	seconds by default, but can be overriden via
380	watcher is created, and should be left alone otherwise. Higher values	424	$ENV{PERL_ANYEVENT_MAX_SIGNAL_LATENCY} or $AnyEvent::MAX_SIGNAL_LATENCY
381	will cause fewer spurious wake-ups, which is better for power and CPU	425	- see the "ENVIRONMENT VARIABLES" section for details.
		426
382	saving. All these problems can be avoided by installing the optional	427	All these problems can be avoided by installing the optional
383	Async::Interrupt module. This will not work with inherently broken event	428	Async::Interrupt module, which works with most event loops. It will not
384	loops such as Event or Event::Lib (and not with POE currently, as POE	429	work with inherently broken event loops such as Event or Event::Lib (and
385	does it's own workaround with one-second latency). With those, you just	430	not with POE currently). For those, you just have to suffer the delays.
386	have to suffer the delays.
387		431
388	CHILD PROCESS WATCHERS	432	CHILD PROCESS WATCHERS
		433	$w = AnyEvent->child (pid => <process id>, cb => <callback>);
		434
389	You can also watch on a child process exit and catch its exit status.	435	You can also watch for a child process exit and catch its exit status.
390		436
391	The child process is specified by the "pid" argument (if set to 0, it	437	The child process is specified by the "pid" argument (on some backends,
392	watches for any child process exit). The watcher will triggered only	438	using 0 watches for any child process exit, on others this will croak).
393	when the child process has finished and an exit status is available, not	439	The watcher will be triggered only when the child process has finished
394	on any trace events (stopped/continued).	440	and an exit status is available, not on any trace events
		441	(stopped/continued).
395		442
396	The callback will be called with the pid and exit status (as returned by	443	The callback will be called with the pid and exit status (as returned by
397	waitpid), so unlike other watcher types, you can rely on child watcher	444	waitpid), so unlike other watcher types, you can rely on child watcher
398	callback arguments.	445	callback arguments.
399		446
…		…
416	This means you cannot create a child watcher as the very first thing in	463	This means you cannot create a child watcher as the very first thing in
417	an AnyEvent program, you have to create at least one watcher before	464	an AnyEvent program, you have to create at least one watcher before
418	you "fork" the child (alternatively, you can call "AnyEvent::detect").	465	you "fork" the child (alternatively, you can call "AnyEvent::detect").
419		466
420	As most event loops do not support waiting for child events, they will	467	As most event loops do not support waiting for child events, they will
421	be emulated by AnyEvent in most cases, in which the latency and race	468	be emulated by AnyEvent in most cases, in which case the latency and
422	problems mentioned in the description of signal watchers apply.	469	race problems mentioned in the description of signal watchers apply.
423		470
424	Example: fork a process and wait for it	471	Example: fork a process and wait for it
425		472
426	my $done = AnyEvent->condvar;	473	my $done = AnyEvent->condvar;
427		474
		475	# this forks and immediately calls exit in the child. this
		476	# normally has all sorts of bad consequences for your parent,
		477	# so take this as an example only. always fork and exec,
		478	# or call POSIX::_exit, in real code.
428	my $pid = fork or exit 5;	479	my $pid = fork or exit 5;
429		480
430	my $w = AnyEvent->child (	481	my $w = AnyEvent->child (
431	pid => $pid,	482	pid => $pid,
432	cb => sub {	483	cb => sub {
…		…
438		489
439	# do something else, then wait for process exit	490	# do something else, then wait for process exit
440	$done->recv;	491	$done->recv;
441		492
442	IDLE WATCHERS	493	IDLE WATCHERS
443	Sometimes there is a need to do something, but it is not so important to	494	$w = AnyEvent->idle (cb => <callback>);
444	do it instantly, but only when there is nothing better to do. This
445	"nothing better to do" is usually defined to be "no other events need
446	attention by the event loop".
447		495
448	Idle watchers ideally get invoked when the event loop has nothing better	496	This will repeatedly invoke the callback after the process becomes idle,
449	to do, just before it would block the process to wait for new events.	497	until either the watcher is destroyed or new events have been detected.
450	Instead of blocking, the idle watcher is invoked.
451		498
452	Most event loops unfortunately do not really support idle watchers (only	499	Idle watchers are useful when there is a need to do something, but it is
		500	not so important (or wise) to do it instantly. The callback will be
		501	invoked only when there is "nothing better to do", which is usually
		502	defined as "all outstanding events have been handled and no new events
		503	have been detected". That means that idle watchers ideally get invoked
		504	when the event loop has just polled for new events but none have been
		505	detected. Instead of blocking to wait for more events, the idle watchers
		506	will be invoked.
		507
		508	Unfortunately, most event loops do not really support idle watchers
453	EV, Event and Glib do it in a usable fashion) - for the rest, AnyEvent	509	(only EV, Event and Glib do it in a usable fashion) - for the rest,
454	will simply call the callback "from time to time".	510	AnyEvent will simply call the callback "from time to time".
455		511
456	Example: read lines from STDIN, but only process them when the program	512	Example: read lines from STDIN, but only process them when the program
457	is otherwise idle:	513	is otherwise idle:
458		514
459	my @lines; # read data	515	my @lines; # read data
…		…
472	}	528	}
473	});	529	});
474	});	530	});
475		531
476	CONDITION VARIABLES	532	CONDITION VARIABLES
		533	$cv = AnyEvent->condvar;
		534
		535	$cv->send (<list>);
		536	my @res = $cv->recv;
		537
477	If you are familiar with some event loops you will know that all of them	538	If you are familiar with some event loops you will know that all of them
478	require you to run some blocking "loop", "run" or similar function that	539	require you to run some blocking "loop", "run" or similar function that
479	will actively watch for new events and call your callbacks.	540	will actively watch for new events and call your callbacks.
480		541
481	AnyEvent is slightly different: it expects somebody else to run the	542	AnyEvent is slightly different: it expects somebody else to run the
482	event loop and will only block when necessary (usually when told by the	543	event loop and will only block when necessary (usually when told by the
483	user).	544	user).
484		545
485	The instrument to do that is called a "condition variable", so called	546	The tool to do that is called a "condition variable", so called because
486	because they represent a condition that must become true.	547	they represent a condition that must become true.
487		548
488	Now is probably a good time to look at the examples further below.	549	Now is probably a good time to look at the examples further below.
489		550
490	Condition variables can be created by calling the "AnyEvent->condvar"	551	Condition variables can be created by calling the "AnyEvent->condvar"
491	method, usually without arguments. The only argument pair allowed is	552	method, usually without arguments. The only argument pair allowed is
…		…
496	After creation, the condition variable is "false" until it becomes	557	After creation, the condition variable is "false" until it becomes
497	"true" by calling the "send" method (or calling the condition variable	558	"true" by calling the "send" method (or calling the condition variable
498	as if it were a callback, read about the caveats in the description for	559	as if it were a callback, read about the caveats in the description for
499	the "->send" method).	560	the "->send" method).
500		561
501	Condition variables are similar to callbacks, except that you can	562	Since condition variables are the most complex part of the AnyEvent API,
502	optionally wait for them. They can also be called merge points - points	563	here are some different mental models of what they are - pick the ones
503	in time where multiple outstanding events have been processed. And yet	564	you can connect to:
504	another way to call them is transactions - each condition variable can	565
505	be used to represent a transaction, which finishes at some point and	566	* Condition variables are like callbacks - you can call them (and pass
506	delivers a result. And yet some people know them as "futures" - a	567	them instead of callbacks). Unlike callbacks however, you can also
507	promise to compute/deliver something that you can wait for.	568	wait for them to be called.
		569
		570	* Condition variables are signals - one side can emit or send them,
		571	the other side can wait for them, or install a handler that is
		572	called when the signal fires.
		573
		574	* Condition variables are like "Merge Points" - points in your program
		575	where you merge multiple independent results/control flows into one.
		576
		577	* Condition variables represent a transaction - functions that start
		578	some kind of transaction can return them, leaving the caller the
		579	choice between waiting in a blocking fashion, or setting a callback.
		580
		581	* Condition variables represent future values, or promises to deliver
		582	some result, long before the result is available.
508		583
509	Condition variables are very useful to signal that something has	584	Condition variables are very useful to signal that something has
510	finished, for example, if you write a module that does asynchronous http	585	finished, for example, if you write a module that does asynchronous http
511	requests, then a condition variable would be the ideal candidate to	586	requests, then a condition variable would be the ideal candidate to
512	signal the availability of results. The user can either act when the	587	signal the availability of results. The user can either act when the
…		…
525		600
526	Condition variables are represented by hash refs in perl, and the keys	601	Condition variables are represented by hash refs in perl, and the keys
527	used by AnyEvent itself are all named "_ae_XXX" to make subclassing easy	602	used by AnyEvent itself are all named "_ae_XXX" to make subclassing easy
528	(it is often useful to build your own transaction class on top of	603	(it is often useful to build your own transaction class on top of
529	AnyEvent). To subclass, use "AnyEvent::CondVar" as base class and call	604	AnyEvent). To subclass, use "AnyEvent::CondVar" as base class and call
530	it's "new" method in your own "new" method.	605	its "new" method in your own "new" method.
531		606
532	There are two "sides" to a condition variable - the "producer side"	607	There are two "sides" to a condition variable - the "producer side"
533	which eventually calls "-> send", and the "consumer side", which waits	608	which eventually calls "-> send", and the "consumer side", which waits
534	for the send to occur.	609	for the send to occur.
535		610
536	Example: wait for a timer.	611	Example: wait for a timer.
537		612
538	# wait till the result is ready	613	# condition: "wait till the timer is fired"
539	my $result_ready = AnyEvent->condvar;	614	my $timer_fired = AnyEvent->condvar;
540		615
541	# do something such as adding a timer	616	# create the timer - we could wait for, say
542	# or socket watcher the calls $result_ready->send	617	# a handle becomign ready, or even an
543	# when the "result" is ready.	618	# AnyEvent::HTTP request to finish, but
544	# in this case, we simply use a timer:	619	# in this case, we simply use a timer:
545	my $w = AnyEvent->timer (	620	my $w = AnyEvent->timer (
546	after => 1,	621	after => 1,
547	cb => sub { $result_ready->send },	622	cb => sub { $timer_fired->send },
548	);	623	);
549		624
550	# this "blocks" (while handling events) till the callback	625	# this "blocks" (while handling events) till the callback
551	# calls -<send	626	# calls ->send
552	$result_ready->recv;	627	$timer_fired->recv;
553		628
554	Example: wait for a timer, but take advantage of the fact that condition	629	Example: wait for a timer, but take advantage of the fact that condition
555	variables are also callable directly.	630	variables are also callable directly.
556		631
557	my $done = AnyEvent->condvar;	632	my $done = AnyEvent->condvar;
…		…
595	Condition variables are overloaded so one can call them directly (as	670	Condition variables are overloaded so one can call them directly (as
596	if they were a code reference). Calling them directly is the same as	671	if they were a code reference). Calling them directly is the same as
597	calling "send".	672	calling "send".
598		673
599	$cv->croak ($error)	674	$cv->croak ($error)
600	Similar to send, but causes all call's to "->recv" to invoke	675	Similar to send, but causes all calls to "->recv" to invoke
601	"Carp::croak" with the given error message/object/scalar.	676	"Carp::croak" with the given error message/object/scalar.
602		677
603	This can be used to signal any errors to the condition variable	678	This can be used to signal any errors to the condition variable
604	user/consumer. Doing it this way instead of calling "croak" directly	679	user/consumer. Doing it this way instead of calling "croak" directly
605	delays the error detetcion, but has the overwhelmign advantage that	680	delays the error detection, but has the overwhelming advantage that
606	it diagnoses the error at the place where the result is expected,	681	it diagnoses the error at the place where the result is expected,
607	and not deep in some event clalback without connection to the actual	682	and not deep in some event callback with no connection to the actual
608	code causing the problem.	683	code causing the problem.
609		684
610	$cv->begin ([group callback])	685	$cv->begin ([group callback])
611	$cv->end	686	$cv->end
612	These two methods can be used to combine many transactions/events	687	These two methods can be used to combine many transactions/events
613	into one. For example, a function that pings many hosts in parallel	688	into one. For example, a function that pings many hosts in parallel
614	might want to use a condition variable for the whole process.	689	might want to use a condition variable for the whole process.
615		690
616	Every call to "->begin" will increment a counter, and every call to	691	Every call to "->begin" will increment a counter, and every call to
617	"->end" will decrement it. If the counter reaches 0 in "->end", the	692	"->end" will decrement it. If the counter reaches 0 in "->end", the
618	(last) callback passed to "begin" will be executed. That callback is	693	(last) callback passed to "begin" will be executed, passing the
619	supposed to call "->send", but that is not required. If no	694	condvar as first argument. That callback is supposed to call
		695	"->send", but that is not required. If no group callback was set,
620	callback was set, "send" will be called without any arguments.	696	"send" will be called without any arguments.
621		697
622	You can think of "$cv->send" giving you an OR condition (one call	698	You can think of "$cv->send" giving you an OR condition (one call
623	sends), while "$cv->begin" and "$cv->end" giving you an AND	699	sends), while "$cv->begin" and "$cv->end" giving you an AND
624	condition (all "begin" calls must be "end"'ed before the condvar	700	condition (all "begin" calls must be "end"'ed before the condvar
625	sends).	701	sends).
…		…
647	This works because for every event source (EOF on file handle),	723	This works because for every event source (EOF on file handle),
648	there is one call to "begin", so the condvar waits for all calls to	724	there is one call to "begin", so the condvar waits for all calls to
649	"end" before sending.	725	"end" before sending.
650		726
651	The ping example mentioned above is slightly more complicated, as	727	The ping example mentioned above is slightly more complicated, as
652	the there are results to be passwd back, and the number of tasks	728	the there are results to be passed back, and the number of tasks
653	that are begung can potentially be zero:	729	that are begun can potentially be zero:
654		730
655	my $cv = AnyEvent->condvar;	731	my $cv = AnyEvent->condvar;
656		732
657	my %result;	733	my %result;
658	$cv->begin (sub { $cv->send (\%result) });	734	$cv->begin (sub { shift->send (\%result) });
659		735
660	for my $host (@list_of_hosts) {	736	for my $host (@list_of_hosts) {
661	$cv->begin;	737	$cv->begin;
662	ping_host_then_call_callback $host, sub {	738	ping_host_then_call_callback $host, sub {
663	$result{$host} = ...;	739	$result{$host} = ...;
…		…
665	};	741	};
666	}	742	}
667		743
668	$cv->end;	744	$cv->end;
669		745
		746	...
		747
		748	my $results = $cv->recv;
		749
670	This code fragment supposedly pings a number of hosts and calls	750	This code fragment supposedly pings a number of hosts and calls
671	"send" after results for all then have have been gathered - in any	751	"send" after results for all then have have been gathered - in any
672	order. To achieve this, the code issues a call to "begin" when it	752	order. To achieve this, the code issues a call to "begin" when it
673	starts each ping request and calls "end" when it has received some	753	starts each ping request and calls "end" when it has received some
674	result for it. Since "begin" and "end" only maintain a counter, the	754	result for it. Since "begin" and "end" only maintain a counter, the
…		…
679	callback to be called once the counter reaches 0, and second, it	759	callback to be called once the counter reaches 0, and second, it
680	ensures that "send" is called even when "no" hosts are being pinged	760	ensures that "send" is called even when "no" hosts are being pinged
681	(the loop doesn't execute once).	761	(the loop doesn't execute once).
682		762
683	This is the general pattern when you "fan out" into multiple (but	763	This is the general pattern when you "fan out" into multiple (but
684	potentially none) subrequests: use an outer "begin"/"end" pair to	764	potentially zero) subrequests: use an outer "begin"/"end" pair to
685	set the callback and ensure "end" is called at least once, and then,	765	set the callback and ensure "end" is called at least once, and then,
686	for each subrequest you start, call "begin" and for each subrequest	766	for each subrequest you start, call "begin" and for each subrequest
687	you finish, call "end".	767	you finish, call "end".
688		768
689	METHODS FOR CONSUMERS	769	METHODS FOR CONSUMERS
690	These methods should only be used by the consuming side, i.e. the code	770	These methods should only be used by the consuming side, i.e. the code
691	awaits the condition.	771	awaits the condition.
692		772
693	$cv->recv	773	$cv->recv
694	Wait (blocking if necessary) until the "->send" or "->croak" methods	774	Wait (blocking if necessary) until the "->send" or "->croak" methods
695	have been called on c<$cv>, while servicing other watchers normally.	775	have been called on $cv, while servicing other watchers normally.
696		776
697	You can only wait once on a condition - additional calls are valid	777	You can only wait once on a condition - additional calls are valid
698	but will return immediately.	778	but will return immediately.
699		779
700	If an error condition has been set by calling "->croak", then this	780	If an error condition has been set by calling "->croak", then this
…		…
703	In list context, all parameters passed to "send" will be returned,	783	In list context, all parameters passed to "send" will be returned,
704	in scalar context only the first one will be returned.	784	in scalar context only the first one will be returned.
705		785
706	Note that doing a blocking wait in a callback is not supported by	786	Note that doing a blocking wait in a callback is not supported by
707	any event loop, that is, recursive invocation of a blocking "->recv"	787	any event loop, that is, recursive invocation of a blocking "->recv"
708	is not allowed, and the "recv" call will "croak" if such a condition	788	is not allowed and the "recv" call will "croak" if such a condition
709	is detected. This condition can be slightly loosened by using	789	is detected. This requirement can be dropped by relying on
710	Coro::AnyEvent, which allows you to do a blocking "->recv" from any	790	Coro::AnyEvent , which allows you to do a blocking "->recv" from any
711	thread that doesn't run the event loop itself.	791	thread that doesn't run the event loop itself. Coro::AnyEvent is
		792	loaded automatically when Coro is used with AnyEvent, so code does
		793	not need to do anything special to take advantage of that: any code
		794	that would normally block your program because it calls "recv", be
		795	executed in an "async" thread instead without blocking other
		796	threads.
712		797
713	Not all event models support a blocking wait - some die in that case	798	Not all event models support a blocking wait - some die in that case
714	(programs might want to do that to stay interactive), so *if you are	799	(programs might want to do that to stay interactive), so *if you are
715	using this from a module, never require a blocking wait*. Instead,	800	using this from a module, never require a blocking wait*. Instead,
716	let the caller decide whether the call will block or not (for	801	let the caller decide whether the call will block or not (for
717	example, by coupling condition variables with some kind of request	802	example, by coupling condition variables with some kind of request
718	results and supporting callbacks so the caller knows that getting	803	results and supporting callbacks so the caller knows that getting
719	the result will not block, while still supporting blocking waits if	804	the result will not block, while still supporting blocking waits if
720	the caller so desires).	805	the caller so desires).
721		806
722	You can ensure that "-recv" never blocks by setting a callback and	807	You can ensure that "->recv" never blocks by setting a callback and
723	only calling "->recv" from within that callback (or at a later	808	only calling "->recv" from within that callback (or at a later
724	time). This will work even when the event loop does not support	809	time). This will work even when the event loop does not support
725	blocking waits otherwise.	810	blocking waits otherwise.
726		811
727	$bool = $cv->ready	812	$bool = $cv->ready
728	Returns true when the condition is "true", i.e. whether "send" or	813	Returns true when the condition is "true", i.e. whether "send" or
729	"croak" have been called.	814	"croak" have been called.
730		815
731	$cb = $cv->cb ($cb->($cv))	816	$cb = $cv->cb ($cb->($cv))
732	This is a mutator function that returns the callback set and	817	This is a mutator function that returns the callback set (or "undef"
733	optionally replaces it before doing so.	818	if not) and optionally replaces it before doing so.
734		819
735	The callback will be called when the condition becomes "true", i.e.	820	The callback will be called when the condition becomes "true", i.e.
736	when "send" or "croak" are called, with the only argument being the	821	when "send" or "croak" are called, with the only argument being the
737	condition variable itself. Calling "recv" inside the callback or at	822	condition variable itself. If the condition is already true, the
		823	callback is called immediately when it is set. Calling "recv" inside
738	any later time is guaranteed not to block.	824	the callback or at any later time is guaranteed not to block.
		825
		826	Additionally, when the callback is invoked, it is also removed from
		827	the condvar (reset to "undef"), so the condvar does not keep a
		828	reference to the callback after invocation.
739		829
740	SUPPORTED EVENT LOOPS/BACKENDS	830	SUPPORTED EVENT LOOPS/BACKENDS
741	The available backend classes are (every class has its own manpage):	831	The following backend classes are part of the AnyEvent distribution
		832	(every class has its own manpage):
742		833
743	Backends that are autoprobed when no other event loop can be found.	834	Backends that are autoprobed when no other event loop can be found.
744	EV is the preferred backend when no other event loop seems to be in	835	EV is the preferred backend when no other event loop seems to be in
745	use. If EV is not installed, then AnyEvent will try Event, and,	836	use. If EV is not installed, then AnyEvent will fall back to its own
746	failing that, will fall back to its own pure-perl implementation,	837	pure-perl implementation, which is available everywhere as it comes
747	which is available everywhere as it comes with AnyEvent itself.	838	with AnyEvent itself.
748		839
749	AnyEvent::Impl::EV based on EV (interface to libev, best choice).	840	AnyEvent::Impl::EV based on EV (interface to libev, best choice).
750	AnyEvent::Impl::Event based on Event, very stable, few glitches.
751	AnyEvent::Impl::Perl pure-perl implementation, fast and portable.	841	AnyEvent::Impl::Perl pure-perl AnyEvent::Loop, fast and portable.
752		842
753	Backends that are transparently being picked up when they are used.	843	Backends that are transparently being picked up when they are used.
754	These will be used when they are currently loaded when the first	844	These will be used if they are already loaded when the first watcher
755	watcher is created, in which case it is assumed that the application	845	is created, in which case it is assumed that the application is
756	is using them. This means that AnyEvent will automatically pick the	846	using them. This means that AnyEvent will automatically pick the
757	right backend when the main program loads an event module before	847	right backend when the main program loads an event module before
758	anything starts to create watchers. Nothing special needs to be done	848	anything starts to create watchers. Nothing special needs to be done
759	by the main program.	849	by the main program.
760		850
		851	AnyEvent::Impl::Event based on Event, very stable, few glitches.
761	AnyEvent::Impl::Glib based on Glib, slow but very stable.	852	AnyEvent::Impl::Glib based on Glib, slow but very stable.
762	AnyEvent::Impl::Tk based on Tk, very broken.	853	AnyEvent::Impl::Tk based on Tk, very broken.
		854	AnyEvent::Impl::UV based on UV, innovated square wheels.
763	AnyEvent::Impl::EventLib based on Event::Lib, leaks memory and worse.	855	AnyEvent::Impl::EventLib based on Event::Lib, leaks memory and worse.
764	AnyEvent::Impl::POE based on POE, very slow, some limitations.	856	AnyEvent::Impl::POE based on POE, very slow, some limitations.
		857	AnyEvent::Impl::Irssi used when running within irssi.
		858	AnyEvent::Impl::IOAsync based on IO::Async.
		859	AnyEvent::Impl::Cocoa based on Cocoa::EventLoop.
		860	AnyEvent::Impl::FLTK based on FLTK (fltk 2 binding).
765		861
766	Backends with special needs.	862	Backends with special needs.
767	Qt requires the Qt::Application to be instantiated first, but will	863	Qt requires the Qt::Application to be instantiated first, but will
768	otherwise be picked up automatically. As long as the main program	864	otherwise be picked up automatically. As long as the main program
769	instantiates the application before any AnyEvent watchers are	865	instantiates the application before any AnyEvent watchers are
770	created, everything should just work.	866	created, everything should just work.
771		867
772	AnyEvent::Impl::Qt based on Qt.	868	AnyEvent::Impl::Qt based on Qt.
773		869
774	Support for IO::Async can only be partial, as it is too broken and
775	architecturally limited to even support the AnyEvent API. It also is
776	the only event loop that needs the loop to be set explicitly, so it
777	can only be used by a main program knowing about AnyEvent. See
778	AnyEvent::Impl::Async for the gory details.
779
780	AnyEvent::Impl::IOAsync based on IO::Async, cannot be autoprobed.
781
782	Event loops that are indirectly supported via other backends.	870	Event loops that are indirectly supported via other backends.
783	Some event loops can be supported via other modules:	871	Some event loops can be supported via other modules:
784		872
785	There is no direct support for WxWidgets (Wx) or Prima.	873	There is no direct support for WxWidgets (Wx) or Prima.
786		874
…		…
794		882
795	AnyEvent knows about both Prima and Wx, however, and will try to	883	AnyEvent knows about both Prima and Wx, however, and will try to
796	load POE when detecting them, in the hope that POE will pick them	884	load POE when detecting them, in the hope that POE will pick them
797	up, in which case everything will be automatic.	885	up, in which case everything will be automatic.
798		886
		887	Known event loops outside the AnyEvent distribution
		888	The following event loops or programs support AnyEvent by providing
		889	their own AnyEvent backend. They will be picked up automatically.
		890
		891	urxvt::anyevent available to rxvt-unicode extensions
		892
799	GLOBAL VARIABLES AND FUNCTIONS	893	GLOBAL VARIABLES AND FUNCTIONS
800	These are not normally required to use AnyEvent, but can be useful to	894	These are not normally required to use AnyEvent, but can be useful to
801	write AnyEvent extension modules.	895	write AnyEvent extension modules.
802		896
803	$AnyEvent::MODEL	897	$AnyEvent::MODEL
804	Contains "undef" until the first watcher is being created, before	898	Contains "undef" until the first watcher is being created, before
805	the backend has been autodetected.	899	the backend has been autodetected.
806		900
807	Afterwards it contains the event model that is being used, which is	901	Afterwards it contains the event model that is being used, which is
808	the name of the Perl class implementing the model. This class is	902	the name of the Perl class implementing the model. This class is
809	usually one of the "AnyEvent::Impl:xxx" modules, but can be any	903	usually one of the "AnyEvent::Impl::xxx" modules, but can be any
810	other class in the case AnyEvent has been extended at runtime (e.g.	904	other class in the case AnyEvent has been extended at runtime (e.g.
811	in rxvt-unicode it will be "urxvt::anyevent").	905	in rxvt-unicode it will be "urxvt::anyevent").
812		906
813	AnyEvent::detect	907	AnyEvent::detect
814	Returns $AnyEvent::MODEL, forcing autodetection of the event model	908	Returns $AnyEvent::MODEL, forcing autodetection of the event model
815	if necessary. You should only call this function right before you	909	if necessary. You should only call this function right before you
816	would have created an AnyEvent watcher anyway, that is, as late as	910	would have created an AnyEvent watcher anyway, that is, as late as
817	possible at runtime, and not e.g. while initialising of your module.	911	possible at runtime, and not e.g. during initialisation of your
		912	module.
		913
		914	The effect of calling this function is as if a watcher had been
		915	created (specifically, actions that happen "when the first watcher
		916	is created" happen when calling detetc as well).
818		917
819	If you need to do some initialisation before AnyEvent watchers are	918	If you need to do some initialisation before AnyEvent watchers are
820	created, use "post_detect".	919	created, use "post_detect".
821		920
822	$guard = AnyEvent::post_detect { BLOCK }	921	$guard = AnyEvent::post_detect { BLOCK }
823	Arranges for the code block to be executed as soon as the event	922	Arranges for the code block to be executed as soon as the event
824	model is autodetected (or immediately if this has already happened).	923	model is autodetected (or immediately if that has already happened).
825		924
826	The block will be executed after the actual backend has been	925	The block will be executed after the actual backend has been
827	detected ($AnyEvent::MODEL is set), but before any watchers have	926	detected ($AnyEvent::MODEL is set), so it is possible to do some
828	been created, so it is possible to e.g. patch @AnyEvent::ISA or do	927	initialisation only when AnyEvent is actually initialised - see the
829	other initialisations - see the sources of AnyEvent::Strict or
830	AnyEvent::AIO to see how this is used.	928	sources of AnyEvent::AIO to see how this is used.
831		929
832	The most common usage is to create some global watchers, without	930	The most common usage is to create some global watchers, without
833	forcing event module detection too early, for example, AnyEvent::AIO	931	forcing event module detection too early. For example, AnyEvent::AIO
834	creates and installs the global IO::AIO watcher in a "post_detect"	932	creates and installs the global IO::AIO watcher in a "post_detect"
835	block to avoid autodetecting the event module at load time.	933	block to avoid autodetecting the event module at load time.
836		934
837	If called in scalar or list context, then it creates and returns an	935	If called in scalar or list context, then it creates and returns an
838	object that automatically removes the callback again when it is	936	object that automatically removes the callback again when it is
		937	destroyed (or "undef" when the hook was immediately executed). See
839	destroyed. See Coro::BDB for a case where this is useful.	938	AnyEvent::AIO for a case where this is useful.
		939
		940	Example: Create a watcher for the IO::AIO module and store it in
		941	$WATCHER, but do so only do so after the event loop is initialised.
		942
		943	our WATCHER;
		944
		945	my $guard = AnyEvent::post_detect {
		946	$WATCHER = AnyEvent->io (fh => IO::AIO::poll_fileno, poll => 'r', cb => \&IO::AIO::poll_cb);
		947	};
		948
		949	# the \|\|= is important in case post_detect immediately runs the block,
		950	# as to not clobber the newly-created watcher. assigning both watcher and
		951	# post_detect guard to the same variable has the advantage of users being
		952	# able to just C<undef $WATCHER> if the watcher causes them grief.
		953
		954	$WATCHER \|\|= $guard;
840		955
841	@AnyEvent::post_detect	956	@AnyEvent::post_detect
842	If there are any code references in this array (you can "push" to it	957	This is a lower level interface then "AnyEvent::post_detect" (the
843	before or after loading AnyEvent), then they will called directly	958	function). This variable is mainly useful for modules that can do
		959	something useful when AnyEvent is used and thus want to know when it
		960	is initialised, but do not need to even load it by default. This
		961	array provides the means to hook into AnyEvent passively, without
		962	loading it.
		963
		964	Here is how it works: If there are any code references in this array
		965	(you can "push" to it before or after loading AnyEvent), then they
844	after the event loop has been chosen.	966	will be called directly after the event loop has been chosen.
845		967
846	You should check $AnyEvent::MODEL before adding to this array,	968	You should check $AnyEvent::MODEL before adding to this array,
847	though: if it is defined then the event loop has already been	969	though: if it is defined then the event loop has already been
848	detected, and the array will be ignored.	970	detected, and the array will be ignored.
849		971
850	Best use "AnyEvent::post_detect { BLOCK }" when your application	972	Best use "AnyEvent::post_detect { BLOCK }" when your application
851	allows it,as it takes care of these details.	973	allows it, as it takes care of these details.
852		974
853	This variable is mainly useful for modules that can do something	975	Example: To load Coro::AnyEvent whenever Coro and AnyEvent are used
854	useful when AnyEvent is used and thus want to know when it is	976	together, you could put this into Coro (this is the actual code used
855	initialised, but do not need to even load it by default. This array	977	by Coro to accomplish this):
856	provides the means to hook into AnyEvent passively, without loading	978
857	it.	979	if (defined $AnyEvent::MODEL) {
		980	# AnyEvent already initialised, so load Coro::AnyEvent
		981	require Coro::AnyEvent;
		982	} else {
		983	# AnyEvent not yet initialised, so make sure to load Coro::AnyEvent
		984	# as soon as it is
		985	push @AnyEvent::post_detect, sub { require Coro::AnyEvent };
		986	}
		987
		988	AnyEvent::postpone { BLOCK }
		989	Arranges for the block to be executed as soon as possible, but not
		990	before the call itself returns. In practise, the block will be
		991	executed just before the event loop polls for new events, or shortly
		992	afterwards.
		993
		994	This function never returns anything (to make the "return postpone {
		995	... }" idiom more useful.
		996
		997	To understand the usefulness of this function, consider a function
		998	that asynchronously does something for you and returns some
		999	transaction object or guard to let you cancel the operation. For
		1000	example, "AnyEvent::Socket::tcp_connect":
		1001
		1002	# start a connection attempt unless one is active
		1003	$self->{connect_guard} \|\|= AnyEvent::Socket::tcp_connect "www.example.net", 80, sub {
		1004	delete $self->{connect_guard};
		1005	...
		1006	};
		1007
		1008	Imagine that this function could instantly call the callback, for
		1009	example, because it detects an obvious error such as a negative port
		1010	number. Invoking the callback before the function returns causes
		1011	problems however: the callback will be called and will try to delete
		1012	the guard object. But since the function hasn't returned yet, there
		1013	is nothing to delete. When the function eventually returns it will
		1014	assign the guard object to "$self->{connect_guard}", where it will
		1015	likely never be deleted, so the program thinks it is still trying to
		1016	connect.
		1017
		1018	This is where "AnyEvent::postpone" should be used. Instead of
		1019	calling the callback directly on error:
		1020
		1021	$cb->(undef), return # signal error to callback, BAD!
		1022	if $some_error_condition;
		1023
		1024	It should use "postpone":
		1025
		1026	AnyEvent::postpone { $cb->(undef) }, return # signal error to callback, later
		1027	if $some_error_condition;
		1028
		1029	AnyEvent::log $level, $msg[, @args]
		1030	Log the given $msg at the given $level.
		1031
		1032	If AnyEvent::Log is not loaded then this function makes a simple
		1033	test to see whether the message will be logged. If the test succeeds
		1034	it will load AnyEvent::Log and call "AnyEvent::Log::log" -
		1035	consequently, look at the AnyEvent::Log documentation for details.
		1036
		1037	If the test fails it will simply return. Right now this happens when
		1038	a numerical loglevel is used and it is larger than the level
		1039	specified via $ENV{PERL_ANYEVENT_VERBOSE}.
		1040
		1041	If you want to sprinkle loads of logging calls around your code,
		1042	consider creating a logger callback with the "AnyEvent::Log::logger"
		1043	function, which can reduce typing, codesize and can reduce the
		1044	logging overhead enourmously.
		1045
		1046	AnyEvent::fh_block $filehandle
		1047	AnyEvent::fh_unblock $filehandle
		1048	Sets blocking or non-blocking behaviour for the given filehandle.
858		1049
859	WHAT TO DO IN A MODULE	1050	WHAT TO DO IN A MODULE
860	As a module author, you should "use AnyEvent" and call AnyEvent methods	1051	As a module author, you should "use AnyEvent" and call AnyEvent methods
861	freely, but you should not load a specific event module or rely on it.	1052	freely, but you should not load a specific event module or rely on it.
862		1053
…		…
870	stall the whole program, and the whole point of using events is to stay	1061	stall the whole program, and the whole point of using events is to stay
871	interactive.	1062	interactive.
872		1063
873	It is fine, however, to call "->recv" when the user of your module	1064	It is fine, however, to call "->recv" when the user of your module
874	requests it (i.e. if you create a http request object ad have a method	1065	requests it (i.e. if you create a http request object ad have a method
875	called "results" that returns the results, it should call "->recv"	1066	called "results" that returns the results, it may call "->recv" freely,
876	freely, as the user of your module knows what she is doing. always).	1067	as the user of your module knows what she is doing. Always).
877		1068
878	WHAT TO DO IN THE MAIN PROGRAM	1069	WHAT TO DO IN THE MAIN PROGRAM
879	There will always be a single main program - the only place that should	1070	There will always be a single main program - the only place that should
880	dictate which event model to use.	1071	dictate which event model to use.
881		1072
882	If it doesn't care, it can just "use AnyEvent" and use it itself, or not	1073	If the program is not event-based, it need not do anything special, even
883	do anything special (it does not need to be event-based) and let	1074	when it depends on a module that uses an AnyEvent. If the program itself
884	AnyEvent decide which implementation to chose if some module relies on	1075	uses AnyEvent, but does not care which event loop is used, all it needs
885	it.	1076	to do is "use AnyEvent". In either case, AnyEvent will choose the best
		1077	available loop implementation.
886		1078
887	If the main program relies on a specific event model - for example, in	1079	If the main program relies on a specific event model - for example, in
888	Gtk2 programs you have to rely on the Glib module - you should load the	1080	Gtk2 programs you have to rely on the Glib module - you should load the
889	event module before loading AnyEvent or any module that uses it:	1081	event module before loading AnyEvent or any module that uses it:
890	generally speaking, you should load it as early as possible. The reason	1082	generally speaking, you should load it as early as possible. The reason
891	is that modules might create watchers when they are loaded, and AnyEvent	1083	is that modules might create watchers when they are loaded, and AnyEvent
892	will decide on the event model to use as soon as it creates watchers,	1084	will decide on the event model to use as soon as it creates watchers,
893	and it might chose the wrong one unless you load the correct one	1085	and it might choose the wrong one unless you load the correct one
894	yourself.	1086	yourself.
895		1087
896	You can chose to use a pure-perl implementation by loading the	1088	You can chose to use a pure-perl implementation by loading the
897	"AnyEvent::Impl::Perl" module, which gives you similar behaviour	1089	"AnyEvent::Loop" module, which gives you similar behaviour everywhere,
898	everywhere, but letting AnyEvent chose the model is generally better.	1090	but letting AnyEvent chose the model is generally better.
899		1091
900	MAINLOOP EMULATION	1092	MAINLOOP EMULATION
901	Sometimes (often for short test scripts, or even standalone programs who	1093	Sometimes (often for short test scripts, or even standalone programs who
902	only want to use AnyEvent), you do not want to run a specific event	1094	only want to use AnyEvent), you do not want to run a specific event
903	loop.	1095	loop.
…		…
915		1107
916	OTHER MODULES	1108	OTHER MODULES
917	The following is a non-exhaustive list of additional modules that use	1109	The following is a non-exhaustive list of additional modules that use
918	AnyEvent as a client and can therefore be mixed easily with other	1110	AnyEvent as a client and can therefore be mixed easily with other
919	AnyEvent modules and other event loops in the same program. Some of the	1111	AnyEvent modules and other event loops in the same program. Some of the
920	modules come with AnyEvent, most are available via CPAN.	1112	modules come as part of AnyEvent, the others are available via CPAN (see
		1113	<http://search.cpan.org/search?m=module&q=anyevent%3A%3A*> for a longer
		1114	non-exhaustive list), and the list is heavily biased towards modules of
		1115	the AnyEvent author himself :)
921		1116
922	AnyEvent::Util	1117	AnyEvent::Util (part of the AnyEvent distribution)
923	Contains various utility functions that replace often-used but	1118	Contains various utility functions that replace often-used blocking
924	blocking functions such as "inet_aton" by event-/callback-based	1119	functions such as "inet_aton" with event/callback-based versions.
925	versions.
926		1120
927	AnyEvent::Socket	1121	AnyEvent::Socket (part of the AnyEvent distribution)
928	Provides various utility functions for (internet protocol) sockets,	1122	Provides various utility functions for (internet protocol) sockets,
929	addresses and name resolution. Also functions to create non-blocking	1123	addresses and name resolution. Also functions to create non-blocking
930	tcp connections or tcp servers, with IPv6 and SRV record support and	1124	tcp connections or tcp servers, with IPv6 and SRV record support and
931	more.	1125	more.
932		1126
933	AnyEvent::Handle	1127	AnyEvent::Handle (part of the AnyEvent distribution)
934	Provide read and write buffers, manages watchers for reads and	1128	Provide read and write buffers, manages watchers for reads and
935	writes, supports raw and formatted I/O, I/O queued and fully	1129	writes, supports raw and formatted I/O, I/O queued and fully
936	transparent and non-blocking SSL/TLS (via AnyEvent::TLS.	1130	transparent and non-blocking SSL/TLS (via AnyEvent::TLS).
937		1131
938	AnyEvent::DNS	1132	AnyEvent::DNS (part of the AnyEvent distribution)
939	Provides rich asynchronous DNS resolver capabilities.	1133	Provides rich asynchronous DNS resolver capabilities.
940		1134
941	AnyEvent::HTTP	1135	AnyEvent::HTTP, AnyEvent::IRC, AnyEvent::XMPP, AnyEvent::GPSD,
942	A simple-to-use HTTP library that is capable of making a lot of	1136	AnyEvent::IGS, AnyEvent::FCP
943	concurrent HTTP requests.	1137	Implement event-based interfaces to the protocols of the same name
		1138	(for the curious, IGS is the International Go Server and FCP is the
		1139	Freenet Client Protocol).
944		1140
		1141	AnyEvent::AIO (part of the AnyEvent distribution)
		1142	Truly asynchronous (as opposed to non-blocking) I/O, should be in
		1143	the toolbox of every event programmer. AnyEvent::AIO transparently
		1144	fuses IO::AIO and AnyEvent together, giving AnyEvent access to
		1145	event-based file I/O, and much more.
		1146
		1147	AnyEvent::Fork, AnyEvent::Fork::RPC, AnyEvent::Fork::Pool,
		1148	AnyEvent::Fork::Remote
		1149	These let you safely fork new subprocesses, either locally or
		1150	remotely (e.g.v ia ssh), using some RPC protocol or not, without the
		1151	limitations normally imposed by fork (AnyEvent works fine for
		1152	example). Dynamically-resized worker pools are obviously included as
		1153	well.
		1154
		1155	And they are quite tiny and fast as well - "abusing" AnyEvent::Fork
		1156	just to exec external programs can easily beat using "fork" and
		1157	"exec" (or even "system") in most programs.
		1158
		1159	AnyEvent::Filesys::Notify
		1160	AnyEvent is good for non-blocking stuff, but it can't detect file or
		1161	path changes (e.g. "watch this directory for new files", "watch this
		1162	file for changes"). The AnyEvent::Filesys::Notify module promises to
		1163	do just that in a portbale fashion, supporting inotify on GNU/Linux
		1164	and some weird, without doubt broken, stuff on OS X to monitor
		1165	files. It can fall back to blocking scans at regular intervals
		1166	transparently on other platforms, so it's about as portable as it
		1167	gets.
		1168
		1169	(I haven't used it myself, but it seems the biggest problem with it
		1170	is it quite bad performance).
		1171
945	AnyEvent::HTTPD	1172	AnyEvent::DBI
946	Provides a simple web application server framework.	1173	Executes DBI requests asynchronously in a proxy process for you,
		1174	notifying you in an event-based way when the operation is finished.
947		1175
948	AnyEvent::FastPing	1176	AnyEvent::FastPing
949	The fastest ping in the west.	1177	The fastest ping in the west.
950		1178
951	AnyEvent::DBI
952	Executes DBI requests asynchronously in a proxy process.
953
954	AnyEvent::AIO
955	Truly asynchronous I/O, should be in the toolbox of every event
956	programmer. AnyEvent::AIO transparently fuses IO::AIO and AnyEvent
957	together.
958
959	AnyEvent::BDB
960	Truly asynchronous Berkeley DB access. AnyEvent::BDB transparently
961	fuses BDB and AnyEvent together.
962
963	AnyEvent::GPSD
964	A non-blocking interface to gpsd, a daemon delivering GPS
965	information.
966
967	AnyEvent::IRC
968	AnyEvent based IRC client module family (replacing the older
969	Net::IRC3).
970
971	AnyEvent::XMPP
972	AnyEvent based XMPP (Jabber protocol) module family (replacing the
973	older Net::XMPP2>.
974
975	AnyEvent::IGS
976	A non-blocking interface to the Internet Go Server protocol (used by
977	App::IGS).
978
979	Net::FCP
980	AnyEvent-based implementation of the Freenet Client Protocol,
981	birthplace of AnyEvent.
982
983	Event::ExecFlow
984	High level API for event-based execution flow control.
985
986	Coro	1179	Coro
987	Has special support for AnyEvent via Coro::AnyEvent.	1180	Has special support for AnyEvent via Coro::AnyEvent, which allows
		1181	you to simply invert the flow control - don't call us, we will call
		1182	you:
		1183
		1184	async {
		1185	Coro::AnyEvent::sleep 5; # creates a 5s timer and waits for it
		1186	print "5 seconds later!\n";
		1187
		1188	Coro::AnyEvent::readable *STDIN; # uses an I/O watcher
		1189	my $line = <STDIN>; # works for ttys
		1190
		1191	AnyEvent::HTTP::http_get "url", Coro::rouse_cb;
		1192	my ($body, $hdr) = Coro::rouse_wait;
		1193	};
		1194
		1195	SIMPLIFIED AE API
		1196	Starting with version 5.0, AnyEvent officially supports a second, much
		1197	simpler, API that is designed to reduce the calling, typing and memory
		1198	overhead by using function call syntax and a fixed number of parameters.
		1199
		1200	See the AE manpage for details.
988		1201
989	ERROR AND EXCEPTION HANDLING	1202	ERROR AND EXCEPTION HANDLING
990	In general, AnyEvent does not do any error handling - it relies on the	1203	In general, AnyEvent does not do any error handling - it relies on the
991	caller to do that if required. The AnyEvent::Strict module (see also the	1204	caller to do that if required. The AnyEvent::Strict module (see also the
992	"PERL_ANYEVENT_STRICT" environment variable, below) provides strict	1205	"PERL_ANYEVENT_STRICT" environment variable, below) provides strict
…		…
1001	The pure perl event loop simply re-throws the exception (usually within	1214	The pure perl event loop simply re-throws the exception (usually within
1002	"condvar->recv"), the Event and EV modules call "$Event/EV::DIED->()",	1215	"condvar->recv"), the Event and EV modules call "$Event/EV::DIED->()",
1003	Glib uses "install_exception_handler" and so on.	1216	Glib uses "install_exception_handler" and so on.
1004		1217
1005	ENVIRONMENT VARIABLES	1218	ENVIRONMENT VARIABLES
1006	The following environment variables are used by this module or its	1219	AnyEvent supports a number of environment variables that tune the
1007	submodules.	1220	runtime behaviour. They are usually evaluated when AnyEvent is loaded,
		1221	initialised, or a submodule that uses them is loaded. Many of them also
		1222	cause AnyEvent to load additional modules - for example,
		1223	"PERL_ANYEVENT_DEBUG_WRAP" causes the AnyEvent::Debug module to be
		1224	loaded.
1008		1225
1009	Note that AnyEvent will remove all environment variables starting with	1226	All the environment variables documented here start with
1010	"PERL_ANYEVENT_" from %ENV when it is loaded while taint mode is	1227	"PERL_ANYEVENT_", which is what AnyEvent considers its own namespace.
1011	enabled.	1228	Other modules are encouraged (but by no means required) to use
		1229	"PERL_ANYEVENT_SUBMODULE" if they have registered the
		1230	AnyEvent::Submodule namespace on CPAN, for any submodule. For example,
		1231	AnyEvent::HTTP could be expected to use "PERL_ANYEVENT_HTTP_PROXY" (it
		1232	should not access env variables starting with "AE_", see below).
		1233
		1234	All variables can also be set via the "AE_" prefix, that is, instead of
		1235	setting "PERL_ANYEVENT_VERBOSE" you can also set "AE_VERBOSE". In case
		1236	there is a clash btween anyevent and another program that uses
		1237	"AE_something" you can set the corresponding "PERL_ANYEVENT_something"
		1238	variable to the empty string, as those variables take precedence.
		1239
		1240	When AnyEvent is first loaded, it copies all "AE_xxx" env variables to
		1241	their "PERL_ANYEVENT_xxx" counterpart unless that variable already
		1242	exists. If taint mode is on, then AnyEvent will remove all environment
		1243	variables starting with "PERL_ANYEVENT_" from %ENV (or replace them with
		1244	"undef" or the empty string, if the corresaponding "AE_" variable is
		1245	set).
		1246
		1247	The exact algorithm is currently:
		1248
		1249	1. if taint mode enabled, delete all PERL_ANYEVENT_xyz variables from %ENV
		1250	2. copy over AE_xyz to PERL_ANYEVENT_xyz unless the latter alraedy exists
		1251	3. if taint mode enabled, set all PERL_ANYEVENT_xyz variables to undef.
		1252
		1253	This ensures that child processes will not see the "AE_" variables.
		1254
		1255	The following environment variables are currently known to AnyEvent:
1012		1256
1013	"PERL_ANYEVENT_VERBOSE"	1257	"PERL_ANYEVENT_VERBOSE"
1014	By default, AnyEvent will be completely silent except in fatal	1258	By default, AnyEvent will log messages with loglevel 4 ("error") or
1015	conditions. You can set this environment variable to make AnyEvent	1259	higher (see AnyEvent::Log). You can set this environment variable to
1016	more talkative.	1260	a numerical loglevel to make AnyEvent more (or less) talkative.
1017		1261
		1262	If you want to do more than just set the global logging level you
		1263	should have a look at "PERL_ANYEVENT_LOG", which allows much more
		1264	complex specifications.
		1265
		1266	When set to 0 ("off"), then no messages whatsoever will be logged
		1267	with everything else at defaults.
		1268
1018	When set to 1 or higher, causes AnyEvent to warn about unexpected	1269	When set to 5 or higher ("warn"), AnyEvent warns about unexpected
1019	conditions, such as not being able to load the event model specified	1270	conditions, such as not being able to load the event model specified
1020	by "PERL_ANYEVENT_MODEL".	1271	by "PERL_ANYEVENT_MODEL", or a guard callback throwing an exception
		1272	- this is the minimum recommended level for use during development.
1021		1273
1022	When set to 2 or higher, cause AnyEvent to report to STDERR which	1274	When set to 7 or higher (info), AnyEvent reports which event model
1023	event model it chooses.	1275	it chooses.
1024		1276
1025	When set to 8 or higher, then AnyEvent will report extra information	1277	When set to 8 or higher (debug), then AnyEvent will report extra
1026	on which optional modules it loads and how it implements certain	1278	information on which optional modules it loads and how it implements
1027	features.	1279	certain features.
		1280
		1281	"PERL_ANYEVENT_LOG"
		1282	Accepts rather complex logging specifications. For example, you
		1283	could log all "debug" messages of some module to stderr, warnings
		1284	and above to stderr, and errors and above to syslog, with:
		1285
		1286	PERL_ANYEVENT_LOG=Some::Module=debug,+log:filter=warn,+%syslog:%syslog=error,syslog
		1287
		1288	For the rather extensive details, see AnyEvent::Log.
		1289
		1290	This variable is evaluated when AnyEvent (or AnyEvent::Log) is
		1291	loaded, so will take effect even before AnyEvent has initialised
		1292	itself.
		1293
		1294	Note that specifying this environment variable causes the
		1295	AnyEvent::Log module to be loaded, while "PERL_ANYEVENT_VERBOSE"
		1296	does not, so only using the latter saves a few hundred kB of memory
		1297	unless a module explicitly needs the extra features of
		1298	AnyEvent::Log.
1028		1299
1029	"PERL_ANYEVENT_STRICT"	1300	"PERL_ANYEVENT_STRICT"
1030	AnyEvent does not do much argument checking by default, as thorough	1301	AnyEvent does not do much argument checking by default, as thorough
1031	argument checking is very costly. Setting this variable to a true	1302	argument checking is very costly. Setting this variable to a true
1032	value will cause AnyEvent to load "AnyEvent::Strict" and then to	1303	value will cause AnyEvent to load "AnyEvent::Strict" and then to
1033	thoroughly check the arguments passed to most method calls. If it	1304	thoroughly check the arguments passed to most method calls. If it
1034	finds any problems, it will croak.	1305	finds any problems, it will croak.
1035		1306
1036	In other words, enables "strict" mode.	1307	In other words, enables "strict" mode.
1037		1308
1038	Unlike "use strict" (or it's modern cousin, "use common::sense", it	1309	Unlike "use strict" (or its modern cousin, "use common::sense", it
1039	is definitely recommended to keep it off in production. Keeping	1310	is definitely recommended to keep it off in production. Keeping
1040	"PERL_ANYEVENT_STRICT=1" in your environment while developing	1311	"PERL_ANYEVENT_STRICT=1" in your environment while developing
1041	programs can be very useful, however.	1312	programs can be very useful, however.
1042		1313
		1314	"PERL_ANYEVENT_DEBUG_SHELL"
		1315	If this env variable is nonempty, then its contents will be
		1316	interpreted by "AnyEvent::Socket::parse_hostport" and
		1317	"AnyEvent::Debug::shell" (after replacing every occurance of $$ by
		1318	the process pid). The shell object is saved in
		1319	$AnyEvent::Debug::SHELL.
		1320
		1321	This happens when the first watcher is created.
		1322
		1323	For example, to bind a debug shell on a unix domain socket in
		1324	/tmp/debug<pid>.sock, you could use this:
		1325
		1326	PERL_ANYEVENT_DEBUG_SHELL=/tmp/debug\$\$.sock perlprog
		1327	# connect with e.g.: socat readline /tmp/debug123.sock
		1328
		1329	Or to bind to tcp port 4545 on localhost:
		1330
		1331	PERL_ANYEVENT_DEBUG_SHELL=127.0.0.1:4545 perlprog
		1332	# connect with e.g.: telnet localhost 4545
		1333
		1334	Note that creating sockets in /tmp or on localhost is very unsafe on
		1335	multiuser systems.
		1336
		1337	"PERL_ANYEVENT_DEBUG_WRAP"
		1338	Can be set to 0, 1 or 2 and enables wrapping of all watchers for
		1339	debugging purposes. See "AnyEvent::Debug::wrap" for details.
		1340
1043	"PERL_ANYEVENT_MODEL"	1341	"PERL_ANYEVENT_MODEL"
1044	This can be used to specify the event model to be used by AnyEvent,	1342	This can be used to specify the event model to be used by AnyEvent,
1045	before auto detection and -probing kicks in. It must be a string	1343	before auto detection and -probing kicks in.
1046	consisting entirely of ASCII letters. The string "AnyEvent::Impl::"	1344
1047	gets prepended and the resulting module name is loaded and if the	1345	It normally is a string consisting entirely of ASCII letters (e.g.
1048	load was successful, used as event model. If it fails to load	1346	"EV" or "IOAsync"). The string "AnyEvent::Impl::" gets prepended and
		1347	the resulting module name is loaded and - if the load was successful
		1348	- used as event model backend. If it fails to load then AnyEvent
1049	AnyEvent will proceed with auto detection and -probing.	1349	will proceed with auto detection and -probing.
1050		1350
1051	This functionality might change in future versions.	1351	If the string ends with "::" instead (e.g. "AnyEvent::Impl::EV::")
		1352	then nothing gets prepended and the module name is used as-is (hint:
		1353	"::" at the end of a string designates a module name and quotes it
		1354	appropriately).
1052		1355
1053	For example, to force the pure perl model (AnyEvent::Impl::Perl) you	1356	For example, to force the pure perl model (AnyEvent::Loop::Perl) you
1054	could start your program like this:	1357	could start your program like this:
1055		1358
1056	PERL_ANYEVENT_MODEL=Perl perl ...	1359	PERL_ANYEVENT_MODEL=Perl perl ...
		1360
		1361	"PERL_ANYEVENT_IO_MODEL"
		1362	The current file I/O model - see AnyEvent::IO for more info.
		1363
		1364	At the moment, only "Perl" (small, pure-perl, synchronous) and
		1365	"IOAIO" (truly asynchronous) are supported. The default is "IOAIO"
		1366	if AnyEvent::AIO can be loaded, otherwise it is "Perl".
1057		1367
1058	"PERL_ANYEVENT_PROTOCOLS"	1368	"PERL_ANYEVENT_PROTOCOLS"
1059	Used by both AnyEvent::DNS and AnyEvent::Socket to determine	1369	Used by both AnyEvent::DNS and AnyEvent::Socket to determine
1060	preferences for IPv4 or IPv6. The default is unspecified (and might	1370	preferences for IPv4 or IPv6. The default is unspecified (and might
1061	change, or be the result of auto probing).	1371	change, or be the result of auto probing).
…		…
1065	mentioned will be used, and preference will be given to protocols	1375	mentioned will be used, and preference will be given to protocols
1066	mentioned earlier in the list.	1376	mentioned earlier in the list.
1067		1377
1068	This variable can effectively be used for denial-of-service attacks	1378	This variable can effectively be used for denial-of-service attacks
1069	against local programs (e.g. when setuid), although the impact is	1379	against local programs (e.g. when setuid), although the impact is
1070	likely small, as the program has to handle conenction and other	1380	likely small, as the program has to handle connection and other
1071	failures anyways.	1381	failures anyways.
1072		1382
1073	Examples: "PERL_ANYEVENT_PROTOCOLS=ipv4,ipv6" - prefer IPv4 over	1383	Examples: "PERL_ANYEVENT_PROTOCOLS=ipv4,ipv6" - prefer IPv4 over
1074	IPv6, but support both and try to use both.	1384	IPv6, but support both and try to use both.
1075	"PERL_ANYEVENT_PROTOCOLS=ipv4" - only support IPv4, never try to	1385	"PERL_ANYEVENT_PROTOCOLS=ipv4" - only support IPv4, never try to
1076	resolve or contact IPv6 addresses.	1386	resolve or contact IPv6 addresses.
1077	"PERL_ANYEVENT_PROTOCOLS=ipv6,ipv4" support either IPv4 or IPv6, but	1387	"PERL_ANYEVENT_PROTOCOLS=ipv6,ipv4" support either IPv4 or IPv6, but
1078	prefer IPv6 over IPv4.	1388	prefer IPv6 over IPv4.
1079		1389
		1390	"PERL_ANYEVENT_HOSTS"
		1391	This variable, if specified, overrides the /etc/hosts file used by
		1392	AnyEvent::Socket"::resolve_sockaddr", i.e. hosts aliases will be
		1393	read from that file instead.
		1394
1080	"PERL_ANYEVENT_EDNS0"	1395	"PERL_ANYEVENT_EDNS0"
1081	Used by AnyEvent::DNS to decide whether to use the EDNS0 extension	1396	Used by AnyEvent::DNS to decide whether to use the EDNS0 extension
1082	for DNS. This extension is generally useful to reduce DNS traffic,	1397	for DNS. This extension is generally useful to reduce DNS traffic,
1083	but some (broken) firewalls drop such DNS packets, which is why it	1398	especially when DNSSEC is involved, but some (broken) firewalls drop
1084	is off by default.	1399	such DNS packets, which is why it is off by default.
1085		1400
1086	Setting this variable to 1 will cause AnyEvent::DNS to announce	1401	Setting this variable to 1 will cause AnyEvent::DNS to announce
1087	EDNS0 in its DNS requests.	1402	EDNS0 in its DNS requests.
1088		1403
1089	"PERL_ANYEVENT_MAX_FORKS"	1404	"PERL_ANYEVENT_MAX_FORKS"
…		…
1093	"PERL_ANYEVENT_MAX_OUTSTANDING_DNS"	1408	"PERL_ANYEVENT_MAX_OUTSTANDING_DNS"
1094	The default value for the "max_outstanding" parameter for the	1409	The default value for the "max_outstanding" parameter for the
1095	default DNS resolver - this is the maximum number of parallel DNS	1410	default DNS resolver - this is the maximum number of parallel DNS
1096	requests that are sent to the DNS server.	1411	requests that are sent to the DNS server.
1097		1412
		1413	"PERL_ANYEVENT_MAX_SIGNAL_LATENCY"
		1414	Perl has inherently racy signal handling (you can basically choose
		1415	between losing signals and memory corruption) - pure perl event
		1416	loops (including "AnyEvent::Loop", when "Async::Interrupt" isn't
		1417	available) therefore have to poll regularly to avoid losing signals.
		1418
		1419	Some event loops are racy, but don't poll regularly, and some event
		1420	loops are written in C but are still racy. For those event loops,
		1421	AnyEvent installs a timer that regularly wakes up the event loop.
		1422
		1423	By default, the interval for this timer is 10 seconds, but you can
		1424	override this delay with this environment variable (or by setting
		1425	the $AnyEvent::MAX_SIGNAL_LATENCY variable before creating signal
		1426	watchers).
		1427
		1428	Lower values increase CPU (and energy) usage, higher values can
		1429	introduce long delays when reaping children or waiting for signals.
		1430
		1431	The AnyEvent::Async module, if available, will be used to avoid this
		1432	polling (with most event loops).
		1433
1098	"PERL_ANYEVENT_RESOLV_CONF"	1434	"PERL_ANYEVENT_RESOLV_CONF"
1099	The file to use instead of /etc/resolv.conf (or OS-specific	1435	The absolute path to a resolv.conf-style file to use instead of
1100	configuration) in the default resolver. When set to the empty	1436	/etc/resolv.conf (or the OS-specific configuration) in the default
1101	string, no default config will be used.	1437	resolver, or the empty string to select the default configuration.
1102		1438
1103	"PERL_ANYEVENT_CA_FILE", "PERL_ANYEVENT_CA_PATH".	1439	"PERL_ANYEVENT_CA_FILE", "PERL_ANYEVENT_CA_PATH".
1104	When neither "ca_file" nor "ca_path" was specified during	1440	When neither "ca_file" nor "ca_path" was specified during
1105	AnyEvent::TLS context creation, and either of these environment	1441	AnyEvent::TLS context creation, and either of these environment
1106	variables exist, they will be used to specify CA certificate	1442	variables are nonempty, they will be used to specify CA certificate
1107	locations instead of a system-dependent default.	1443	locations instead of a system-dependent default.
1108		1444
1109	"PERL_ANYEVENT_AVOID_GUARD" and "PERL_ANYEVENT_AVOID_ASYNC_INTERRUPT"	1445	"PERL_ANYEVENT_AVOID_GUARD" and "PERL_ANYEVENT_AVOID_ASYNC_INTERRUPT"
1110	When these are set to 1, then the respective modules are not loaded.	1446	When these are set to 1, then the respective modules are not loaded.
1111	Mostly good for testing AnyEvent itself.	1447	Mostly good for testing AnyEvent itself.
…		…
1171	warn "read: $input\n"; # output what has been read	1507	warn "read: $input\n"; # output what has been read
1172	$cv->send if $input =~ /^q/i; # quit program if /^q/i	1508	$cv->send if $input =~ /^q/i; # quit program if /^q/i
1173	},	1509	},
1174	);	1510	);
1175		1511
1176	my $time_watcher; # can only be used once
1177
1178	sub new_timer {
1179	$timer = AnyEvent->timer (after => 1, cb => sub {	1512	my $time_watcher = AnyEvent->timer (after => 1, interval => 1, cb => sub {
1180	warn "timeout\n"; # print 'timeout' about every second	1513	warn "timeout\n"; # print 'timeout' at most every second
1181	&new_timer; # and restart the time
1182	});
1183	}	1514	});
1184
1185	new_timer; # create first timer
1186		1515
1187	$cv->recv; # wait until user enters /^q/i	1516	$cv->recv; # wait until user enters /^q/i
1188		1517
1189	REAL-WORLD EXAMPLE	1518	REAL-WORLD EXAMPLE
1190	Consider the Net::FCP module. It features (among others) the following	1519	Consider the Net::FCP module. It features (among others) the following
…		…
1262		1591
1263	The actual code goes further and collects all errors ("die"s,	1592	The actual code goes further and collects all errors ("die"s,
1264	exceptions) that occurred during request processing. The "result" method	1593	exceptions) that occurred during request processing. The "result" method
1265	detects whether an exception as thrown (it is stored inside the $txn	1594	detects whether an exception as thrown (it is stored inside the $txn
1266	object) and just throws the exception, which means connection errors and	1595	object) and just throws the exception, which means connection errors and
1267	other problems get reported tot he code that tries to use the result,	1596	other problems get reported to the code that tries to use the result,
1268	not in a random callback.	1597	not in a random callback.
1269		1598
1270	All of this enables the following usage styles:	1599	All of this enables the following usage styles:
1271		1600
1272	1. Blocking:	1601	1. Blocking:
…		…
1290	my $txn = shift;	1619	my $txn = shift;
1291	my $data = $txn->result;	1620	my $data = $txn->result;
1292	...	1621	...
1293	});	1622	});
1294		1623
1295	EV::loop;	1624	EV::run;
1296		1625
1297	3b. The module user could use AnyEvent, too:	1626	3b. The module user could use AnyEvent, too:
1298		1627
1299	use AnyEvent;	1628	use AnyEvent;
1300		1629
…		…
1317	through AnyEvent. The benchmark creates a lot of timers (with a zero	1646	through AnyEvent. The benchmark creates a lot of timers (with a zero
1318	timeout) and I/O watchers (watching STDOUT, a pty, to become writable,	1647	timeout) and I/O watchers (watching STDOUT, a pty, to become writable,
1319	which it is), lets them fire exactly once and destroys them again.	1648	which it is), lets them fire exactly once and destroys them again.
1320		1649
1321	Source code for this benchmark is found as eg/bench in the AnyEvent	1650	Source code for this benchmark is found as eg/bench in the AnyEvent
1322	distribution.	1651	distribution. It uses the AE interface, which makes a real difference
		1652	for the EV and Perl backends only.
1323		1653
1324	Explanation of the columns	1654	Explanation of the columns
1325	watcher is the number of event watchers created/destroyed. Since	1655	watcher is the number of event watchers created/destroyed. Since
1326	different event models feature vastly different performances, each event	1656	different event models feature vastly different performances, each event
1327	loop was given a number of watchers so that overall runtime is	1657	loop was given a number of watchers so that overall runtime is
…		…
1346	destroy is the time, in microseconds, that it takes to destroy a	1676	destroy is the time, in microseconds, that it takes to destroy a
1347	single watcher.	1677	single watcher.
1348		1678
1349	Results	1679	Results
1350	name watchers bytes create invoke destroy comment	1680	name watchers bytes create invoke destroy comment
1351	EV/EV 400000 224 0.47 0.35 0.27 EV native interface	1681	EV/EV 100000 223 0.47 0.43 0.27 EV native interface
1352	EV/Any 100000 224 2.88 0.34 0.27 EV + AnyEvent watchers	1682	EV/Any 100000 223 0.48 0.42 0.26 EV + AnyEvent watchers
1353	CoroEV/Any 100000 224 2.85 0.35 0.28 coroutines + Coro::Signal	1683	Coro::EV/Any 100000 223 0.47 0.42 0.26 coroutines + Coro::Signal
1354	Perl/Any 100000 452 4.13 0.73 0.95 pure perl implementation	1684	Perl/Any 100000 431 2.70 0.74 0.92 pure perl implementation
1355	Event/Event 16000 517 32.20 31.80 0.81 Event native interface	1685	Event/Event 16000 516 31.16 31.84 0.82 Event native interface
1356	Event/Any 16000 590 35.85 31.55 1.06 Event + AnyEvent watchers	1686	Event/Any 16000 1203 42.61 34.79 1.80 Event + AnyEvent watchers
1357	IOAsync/Any 16000 989 38.10 32.77 11.13 via IO::Async::Loop::IO_Poll	1687	IOAsync/Any 16000 1911 41.92 27.45 16.81 via IO::Async::Loop::IO_Poll
1358	IOAsync/Any 16000 990 37.59 29.50 10.61 via IO::Async::Loop::Epoll	1688	IOAsync/Any 16000 1726 40.69 26.37 15.25 via IO::Async::Loop::Epoll
1359	Glib/Any 16000 1357 102.33 12.31 51.00 quadratic behaviour	1689	Glib/Any 16000 1118 89.00 12.57 51.17 quadratic behaviour
1360	Tk/Any 2000 1860 27.20 66.31 14.00 SEGV with >> 2000 watchers	1690	Tk/Any 2000 1346 20.96 10.75 8.00 SEGV with >> 2000 watchers
1361	POE/Event 2000 6328 109.99 751.67 14.02 via POE::Loop::Event	1691	POE/Any 2000 6951 108.97 795.32 14.24 via POE::Loop::Event
1362	POE/Select 2000 6027 94.54 809.13 579.80 via POE::Loop::Select	1692	POE/Any 2000 6648 94.79 774.40 575.51 via POE::Loop::Select
1363		1693
1364	Discussion	1694	Discussion
1365	The benchmark does not measure scalability of the event loop very	1695	The benchmark does not measure scalability of the event loop very
1366	well. For example, a select-based event loop (such as the pure perl one)	1696	well. For example, a select-based event loop (such as the pure perl one)
1367	can never compete with an event loop that uses epoll when the number of	1697	can never compete with an event loop that uses epoll when the number of
…		…
1378	benchmark machine, handling an event takes roughly 1600 CPU cycles with	1708	benchmark machine, handling an event takes roughly 1600 CPU cycles with
1379	EV, 3100 CPU cycles with AnyEvent's pure perl loop and almost 3000000	1709	EV, 3100 CPU cycles with AnyEvent's pure perl loop and almost 3000000
1380	CPU cycles with POE.	1710	CPU cycles with POE.
1381		1711
1382	"EV" is the sole leader regarding speed and memory use, which are both	1712	"EV" is the sole leader regarding speed and memory use, which are both
1383	maximal/minimal, respectively. Even when going through AnyEvent, it uses	1713	maximal/minimal, respectively. When using the AE API there is zero
		1714	overhead (when going through the AnyEvent API create is about 5-6 times
		1715	slower, with other times being equal, so still uses far less memory than
1384	far less memory than any other event loop and is still faster than Event	1716	any other event loop and is still faster than Event natively).
1385	natively.
1386		1717
1387	The pure perl implementation is hit in a few sweet spots (both the	1718	The pure perl implementation is hit in a few sweet spots (both the
1388	constant timeout and the use of a single fd hit optimisations in the	1719	constant timeout and the use of a single fd hit optimisations in the
1389	perl interpreter and the backend itself). Nevertheless this shows that	1720	perl interpreter and the backend itself). Nevertheless this shows that
1390	it adds very little overhead in itself. Like any select-based backend	1721	it adds very little overhead in itself. Like any select-based backend
…		…
1436	when used without AnyEvent), but most event loops have acceptable	1767	when used without AnyEvent), but most event loops have acceptable
1437	performance with or without AnyEvent.	1768	performance with or without AnyEvent.
1438		1769
1439	* The overhead AnyEvent adds is usually much smaller than the overhead	1770	* The overhead AnyEvent adds is usually much smaller than the overhead
1440	of the actual event loop, only with extremely fast event loops such	1771	of the actual event loop, only with extremely fast event loops such
1441	as EV adds AnyEvent significant overhead.	1772	as EV does AnyEvent add significant overhead.
1442		1773
1443	* You should avoid POE like the plague if you want performance or	1774	* You should avoid POE like the plague if you want performance or
1444	reasonable memory usage.	1775	reasonable memory usage.
1445		1776
1446	BENCHMARKING THE LARGE SERVER CASE	1777	BENCHMARKING THE LARGE SERVER CASE
…		…
1460	In this benchmark, we use 10000 socket pairs (20000 sockets), of which	1791	In this benchmark, we use 10000 socket pairs (20000 sockets), of which
1461	100 (1%) are active. This mirrors the activity of large servers with	1792	100 (1%) are active. This mirrors the activity of large servers with
1462	many connections, most of which are idle at any one point in time.	1793	many connections, most of which are idle at any one point in time.
1463		1794
1464	Source code for this benchmark is found as eg/bench2 in the AnyEvent	1795	Source code for this benchmark is found as eg/bench2 in the AnyEvent
1465	distribution.	1796	distribution. It uses the AE interface, which makes a real difference
		1797	for the EV and Perl backends only.
1466		1798
1467	Explanation of the columns	1799	Explanation of the columns
1468	sockets is the number of sockets, and twice the number of "servers"	1800	sockets is the number of sockets, and twice the number of "servers"
1469	(as each server has a read and write socket end).	1801	(as each server has a read and write socket end).
1470		1802
…		…
1476	forwarding it to another server. This includes deleting the old timeout	1808	forwarding it to another server. This includes deleting the old timeout
1477	and creating a new one that moves the timeout into the future.	1809	and creating a new one that moves the timeout into the future.
1478		1810
1479	Results	1811	Results
1480	name sockets create request	1812	name sockets create request
1481	EV 20000 69.01 11.16	1813	EV 20000 62.66 7.99
1482	Perl 20000 73.32 35.87	1814	Perl 20000 68.32 32.64
1483	IOAsync 20000 157.00 98.14 epoll	1815	IOAsync 20000 174.06 101.15 epoll
1484	IOAsync 20000 159.31 616.06 poll	1816	IOAsync 20000 174.67 610.84 poll
1485	Event 20000 212.62 257.32	1817	Event 20000 202.69 242.91
1486	Glib 20000 651.16 1896.30	1818	Glib 20000 557.01 1689.52
1487	POE 20000 349.67 12317.24 uses POE::Loop::Event	1819	POE 20000 341.54 12086.32 uses POE::Loop::Event
1488		1820
1489	Discussion	1821	Discussion
1490	This benchmark does measure scalability and overall performance of the	1822	This benchmark does measure scalability and overall performance of the
1491	particular event loop.	1823	particular event loop.
1492		1824
…		…
1605	As you can see, the AnyEvent + EV combination even beats the	1937	As you can see, the AnyEvent + EV combination even beats the
1606	hand-optimised "raw sockets benchmark", while AnyEvent + its pure perl	1938	hand-optimised "raw sockets benchmark", while AnyEvent + its pure perl
1607	backend easily beats IO::Lambda and POE.	1939	backend easily beats IO::Lambda and POE.
1608		1940
1609	And even the 100% non-blocking version written using the high-level (and	1941	And even the 100% non-blocking version written using the high-level (and
1610	slow :) AnyEvent::Handle abstraction beats both POE and IO::Lambda by a	1942	slow :) AnyEvent::Handle abstraction beats both POE and IO::Lambda
1611	large margin, even though it does all of DNS, tcp-connect and socket I/O	1943	higher level ("unoptimised") abstractions by a large margin, even though
1612	in a non-blocking way.	1944	it does all of DNS, tcp-connect and socket I/O in a non-blocking way.
1613		1945
1614	The two AnyEvent benchmarks programs can be found as eg/ae0.pl and	1946	The two AnyEvent benchmarks programs can be found as eg/ae0.pl and
1615	eg/ae2.pl in the AnyEvent distribution, the remaining benchmarks are	1947	eg/ae2.pl in the AnyEvent distribution, the remaining benchmarks are
1616	part of the IO::lambda distribution and were used without any changes.	1948	part of the IO::Lambda distribution and were used without any changes.
1617		1949
1618	SIGNALS	1950	SIGNALS
1619	AnyEvent currently installs handlers for these signals:	1951	AnyEvent currently installs handlers for these signals:
1620		1952
1621	SIGCHLD	1953	SIGCHLD
…		…
1643		1975
1644	Feel free to install your own handler, or reset it to defaults.	1976	Feel free to install your own handler, or reset it to defaults.
1645		1977
1646	RECOMMENDED/OPTIONAL MODULES	1978	RECOMMENDED/OPTIONAL MODULES
1647	One of AnyEvent's main goals is to be 100% Pure-Perl(tm): only perl (and	1979	One of AnyEvent's main goals is to be 100% Pure-Perl(tm): only perl (and
1648	it's built-in modules) are required to use it.	1980	its built-in modules) are required to use it.
1649		1981
1650	That does not mean that AnyEvent won't take advantage of some additional	1982	That does not mean that AnyEvent won't take advantage of some additional
1651	modules if they are installed.	1983	modules if they are installed.
1652		1984
1653	This section epxlains which additional modules will be used, and how	1985	This section explains which additional modules will be used, and how
1654	they affect AnyEvent's operetion.	1986	they affect AnyEvent's operation.
1655		1987
1656	Async::Interrupt	1988	Async::Interrupt
1657	This slightly arcane module is used to implement fast signal	1989	This slightly arcane module is used to implement fast signal
1658	handling: To my knowledge, there is no way to do completely	1990	handling: To my knowledge, there is no way to do completely
1659	race-free and quick signal handling in pure perl. To ensure that	1991	race-free and quick signal handling in pure perl. To ensure that
…		…
1662	10 seconds, look for $AnyEvent::MAX_SIGNAL_LATENCY).	1994	10 seconds, look for $AnyEvent::MAX_SIGNAL_LATENCY).
1663		1995
1664	If this module is available, then it will be used to implement	1996	If this module is available, then it will be used to implement
1665	signal catching, which means that signals will not be delayed, and	1997	signal catching, which means that signals will not be delayed, and
1666	the event loop will not be interrupted regularly, which is more	1998	the event loop will not be interrupted regularly, which is more
1667	efficient (And good for battery life on laptops).	1999	efficient (and good for battery life on laptops).
1668		2000
1669	This affects not just the pure-perl event loop, but also other event	2001	This affects not just the pure-perl event loop, but also other event
1670	loops that have no signal handling on their own (e.g. Glib, Tk, Qt).	2002	loops that have no signal handling on their own (e.g. Glib, Tk, Qt).
1671		2003
1672	Some event loops (POE, Event, Event::Lib) offer signal watchers	2004	Some event loops (POE, Event, Event::Lib) offer signal watchers
…		…
1682	clock is available, can take avdantage of advanced kernel interfaces	2014	clock is available, can take avdantage of advanced kernel interfaces
1683	such as "epoll" and "kqueue", and is the fastest backend by far.	2015	such as "epoll" and "kqueue", and is the fastest backend by far.
1684	You can even embed Glib/Gtk2 in it (or vice versa, see EV::Glib and	2016	You can even embed Glib/Gtk2 in it (or vice versa, see EV::Glib and
1685	Glib::EV).	2017	Glib::EV).
1686		2018
		2019	If you only use backends that rely on another event loop (e.g.
		2020	"Tk"), then this module will do nothing for you.
		2021
1687	Guard	2022	Guard
1688	The guard module, when used, will be used to implement	2023	The guard module, when used, will be used to implement
1689	"AnyEvent::Util::guard". This speeds up guards considerably (and	2024	"AnyEvent::Util::guard". This speeds up guards considerably (and
1690	uses a lot less memory), but otherwise doesn't affect guard	2025	uses a lot less memory), but otherwise doesn't affect guard
1691	operation much. It is purely used for performance.	2026	operation much. It is purely used for performance.
1692		2027
1693	JSON and JSON::XS	2028	JSON and JSON::XS
1694	This module is required when you want to read or write JSON data via	2029	One of these modules is required when you want to read or write JSON
1695	AnyEvent::Handle. It is also written in pure-perl, but can take	2030	data via AnyEvent::Handle. JSON is also written in pure-perl, but
1696	advantage of the ultra-high-speed JSON::XS module when it is	2031	can take advantage of the ultra-high-speed JSON::XS module when it
1697	installed.	2032	is installed.
1698
1699	In fact, AnyEvent::Handle will use JSON::XS by default if it is
1700	installed.
1701		2033
1702	Net::SSLeay	2034	Net::SSLeay
1703	Implementing TLS/SSL in Perl is certainly interesting, but not very	2035	Implementing TLS/SSL in Perl is certainly interesting, but not very
1704	worthwhile: If this module is installed, then AnyEvent::Handle (with	2036	worthwhile: If this module is installed, then AnyEvent::Handle (with
1705	the help of AnyEvent::TLS), gains the ability to do TLS/SSL.	2037	the help of AnyEvent::TLS), gains the ability to do TLS/SSL.
1706		2038
1707	Time::HiRes	2039	Time::HiRes
1708	This module is part of perl since release 5.008. It will be used	2040	This module is part of perl since release 5.008. It will be used
1709	when the chosen event library does not come with a timing source on	2041	when the chosen event library does not come with a timing source of
1710	it's own. The pure-perl event loop (AnyEvent::Impl::Perl) will	2042	its own. The pure-perl event loop (AnyEvent::Loop) will additionally
1711	additionally use it to try to use a monotonic clock for timing	2043	load it to try to use a monotonic clock for timing stability.
1712	stability.	2044
		2045	AnyEvent::AIO (and IO::AIO)
		2046	The default implementation of AnyEvent::IO is to do I/O
		2047	synchronously, stopping programs while they access the disk, which
		2048	is fine for a lot of programs.
		2049
		2050	Installing AnyEvent::AIO (and its IO::AIO dependency) makes it
		2051	switch to a true asynchronous implementation, so event processing
		2052	can continue even while waiting for disk I/O.
1713		2053
1714	FORK	2054	FORK
1715	Most event libraries are not fork-safe. The ones who are usually are	2055	Most event libraries are not fork-safe. The ones who are usually are
1716	because they rely on inefficient but fork-safe "select" or "poll" calls.	2056	because they rely on inefficient but fork-safe "select" or "poll" calls
1717	Only EV is fully fork-aware.	2057	- higher performance APIs such as BSD's kqueue or the dreaded Linux
		2058	epoll are usually badly thought-out hacks that are incompatible with
		2059	fork in one way or another. Only EV is fully fork-aware and ensures that
		2060	you continue event-processing in both parent and child (or both, if you
		2061	know what you are doing).
		2062
		2063	This means that, in general, you cannot fork and do event processing in
		2064	the child if the event library was initialised before the fork (which
		2065	usually happens when the first AnyEvent watcher is created, or the
		2066	library is loaded).
1718		2067
1719	If you have to fork, you must either do so before creating your first	2068	If you have to fork, you must either do so before creating your first
1720	watcher OR you must not use AnyEvent at all in the child OR you must do	2069	watcher OR you must not use AnyEvent at all in the child OR you must do
1721	something completely out of the scope of AnyEvent.	2070	something completely out of the scope of AnyEvent (see below).
		2071
		2072	The problem of doing event processing in the parent and the child is
		2073	much more complicated: even for backends that are fork-aware or
		2074	fork-safe, their behaviour is not usually what you want: fork clones all
		2075	watchers, that means all timers, I/O watchers etc. are active in both
		2076	parent and child, which is almost never what you want. Using "exec" to
		2077	start worker children from some kind of manage prrocess is usually
		2078	preferred, because it is much easier and cleaner, at the expense of
		2079	having to have another binary.
		2080
		2081	In addition to logical problems with fork, there are also implementation
		2082	problems. For example, on POSIX systems, you cannot fork at all in Perl
		2083	code if a thread (I am talking of pthreads here) was ever created in the
		2084	process, and this is just the tip of the iceberg. In general, using fork
		2085	from Perl is difficult, and attempting to use fork without an exec to
		2086	implement some kind of parallel processing is almost certainly doomed.
		2087
		2088	To safely fork and exec, you should use a module such as Proc::FastSpawn
		2089	that let's you safely fork and exec new processes.
		2090
		2091	If you want to do multiprocessing using processes, you can look at the
		2092	AnyEvent::Fork module (and some related modules such as
		2093	AnyEvent::Fork::RPC, AnyEvent::Fork::Pool and AnyEvent::Fork::Remote).
		2094	This module allows you to safely create subprocesses without any
		2095	limitations - you can use X11 toolkits or AnyEvent in the children
		2096	created by AnyEvent::Fork safely and without any special precautions.
1722		2097
1723	SECURITY CONSIDERATIONS	2098	SECURITY CONSIDERATIONS
1724	AnyEvent can be forced to load any event model via	2099	AnyEvent can be forced to load any event model via
1725	$ENV{PERL_ANYEVENT_MODEL}. While this cannot (to my knowledge) be used	2100	$ENV{PERL_ANYEVENT_MODEL}. While this cannot (to my knowledge) be used
1726	to execute arbitrary code or directly gain access, it can easily be used	2101	to execute arbitrary code or directly gain access, it can easily be used
…		…
1750	5.10 and check wether the leaks still show up. (Perl 5.10.0 has other	2125	5.10 and check wether the leaks still show up. (Perl 5.10.0 has other
1751	annoying memleaks, such as leaking on "map" and "grep" but it is usually	2126	annoying memleaks, such as leaking on "map" and "grep" but it is usually
1752	not as pronounced).	2127	not as pronounced).
1753		2128
1754	SEE ALSO	2129	SEE ALSO
1755	Utility functions: AnyEvent::Util.	2130	Tutorial/Introduction: AnyEvent::Intro.
1756		2131
1757	Event modules: EV, EV::Glib, Glib::EV, Event, Glib::Event, Glib, Tk,	2132	FAQ: AnyEvent::FAQ.
1758	Event::Lib, Qt, POE.	2133
		2134	Utility functions: AnyEvent::Util (misc. grab-bag), AnyEvent::Log
		2135	(simply logging).
		2136
		2137	Development/Debugging: AnyEvent::Strict (stricter checking),
		2138	AnyEvent::Debug (interactive shell, watcher tracing).
		2139
		2140	Supported event modules: AnyEvent::Loop, EV, EV::Glib, Glib::EV, Event,
		2141	Glib::Event, Glib, Tk, Event::Lib, Qt, POE, FLTK, Cocoa::EventLoop, UV.
1759		2142
1760	Implementations: AnyEvent::Impl::EV, AnyEvent::Impl::Event,	2143	Implementations: AnyEvent::Impl::EV, AnyEvent::Impl::Event,
1761	AnyEvent::Impl::Glib, AnyEvent::Impl::Tk, AnyEvent::Impl::Perl,	2144	AnyEvent::Impl::Glib, AnyEvent::Impl::Tk, AnyEvent::Impl::Perl,
1762	AnyEvent::Impl::EventLib, AnyEvent::Impl::Qt, AnyEvent::Impl::POE,	2145	AnyEvent::Impl::EventLib, AnyEvent::Impl::Qt, AnyEvent::Impl::POE,
1763	AnyEvent::Impl::IOAsync.	2146	AnyEvent::Impl::IOAsync, AnyEvent::Impl::Irssi, AnyEvent::Impl::FLTK,
		2147	AnyEvent::Impl::Cocoa, AnyEvent::Impl::UV.
1764		2148
1765	Non-blocking file handles, sockets, TCP clients and servers:	2149	Non-blocking handles, pipes, stream sockets, TCP clients and servers:
1766	AnyEvent::Handle, AnyEvent::Socket, AnyEvent::TLS.	2150	AnyEvent::Handle, AnyEvent::Socket, AnyEvent::TLS.
1767		2151
		2152	Asynchronous File I/O: AnyEvent::IO.
		2153
1768	Asynchronous DNS: AnyEvent::DNS.	2154	Asynchronous DNS: AnyEvent::DNS.
1769		2155
1770	Coroutine support: Coro, Coro::AnyEvent, Coro::EV, Coro::Event,	2156	Thread support: Coro, Coro::AnyEvent, Coro::EV, Coro::Event.
1771		2157
1772	Nontrivial usage examples: AnyEvent::GPSD, AnyEvent::XMPP,	2158	Nontrivial usage examples: AnyEvent::GPSD, AnyEvent::IRC,
1773	AnyEvent::HTTP.	2159	AnyEvent::HTTP.
1774		2160
1775	AUTHOR	2161	AUTHOR
1776	Marc Lehmann <schmorp@schmorp.de>	2162	Marc Lehmann <schmorp@schmorp.de>
1777	http://home.schmorp.de/	2163	http://anyevent.schmorp.de
1778		2164

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/README (file contents): Revision 1.47 by root, Mon Jul 20 22:39:57 2009 UTC vs. Revision 1.79 by root, Tue Feb 26 02:08:34 2019 UTC

Diff Legend

Comparing AnyEvent/README (file contents):
Revision 1.47 by root, Mon Jul 20 22:39:57 2009 UTC vs.
Revision 1.79 by root, Tue Feb 26 02:08:34 2019 UTC