[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent.pm

Comparing AnyEvent/lib/AnyEvent.pm (file contents):
Revision 1.136 by root, Sun May 25 23:52:02 2008 UTC vs.
Revision 1.165 by root, Tue Jul 8 23:07:26 2008 UTC

-=head1 => NAME
+=head1 NAME
 AnyEvent - provide framework for multiple event loops
 EV, Event, Glib, Tk, Perl, Event::Lib, Qt, POE - various supported event loops
    });
    my $w = AnyEvent->condvar; # stores whether a condition was flagged
    $w->send; # wake up current and all future recv's
    $w->recv; # enters "main loop" till $condvar gets ->send
+=head1 INTRODUCTION/TUTORIAL
+This manpage is mainly a reference manual. If you are interested
+in a tutorial or some gentle introduction, have a look at the
+L<AnyEvent::Intro> manpage.
 =head1 WHY YOU SHOULD USE THIS MODULE (OR NOT)
 Glib, POE, IO::Async, Event... CPAN offers event models by the dozen
 nowadays. So what is different about AnyEvent?
 isn't itself. What's worse, all the potential users of your module are
 I<also> forced to use the same event loop you use.
 AnyEvent is different: AnyEvent + POE works fine. AnyEvent + Glib works
 fine. AnyEvent + Tk works fine etc. etc. but none of these work together
-with the rest: POE + IO::Async? no go. Tk + Event? no go. Again: if
+with the rest: POE + IO::Async? No go. Tk + Event? No go. Again: if
 your module uses one of those, every user of your module has to use it,
 too. But if your module uses AnyEvent, it works transparently with all
 event models it supports (including stuff like POE and IO::Async, as long
 as those use one of the supported event loops. It is trivial to add new
 event loops to AnyEvent, too, so it is future-proof).
 modules, you get an enormous amount of code and strict rules you have to
 follow. AnyEvent, on the other hand, is lean and up to the point, by only
 offering the functionality that is necessary, in as thin as a wrapper as
 technically possible.
+Of course, AnyEvent comes with a big (and fully optional!) toolbox
+of useful functionality, such as an asynchronous DNS resolver, 100%
+non-blocking connects (even with TLS/SSL, IPv6 and on broken platforms
+such as Windows) and lots of real-world knowledge and workarounds for
+platform bugs and differences.
-Of course, if you want lots of policy (this can arguably be somewhat
+Now, if you I<do want> lots of policy (this can arguably be somewhat
 useful) and you want to force your users to use the one and only event
 model, you should I<not> use this module.
 =head1 DESCRIPTION
 starts using it, all bets are off. Maybe you should tell their authors to
 use AnyEvent so their modules work together with others seamlessly...
 The pure-perl implementation of AnyEvent is called
 C<AnyEvent::Impl::Perl>. Like other event modules you can load it
-explicitly.
+explicitly and enjoy the high availability of that event loop :)
 =head1 WATCHERS
 AnyEvent has the central concept of a I<watcher>, which is an object that
 stores relevant data for each kind of event you are waiting for, such as
 Many watchers either are used with "recursion" (repeating timers for
 example), or need to refer to their watcher object in other ways.
 An any way to achieve that is this pattern:
-  my $w; $w = AnyEvent->type (arg => value ..., cb => sub {
+   my $w; $w = AnyEvent->type (arg => value ..., cb => sub {
-     # you can use $w here, for example to undef it
+      # you can use $w here, for example to undef it
-     undef $w;
+      undef $w;
-  });
+   });
 Note that C<my $w; $w => combination. This is necessary because in Perl,
 my variables are only visible after the statement in which they are
 declared.
 Some event loops issue spurious readyness notifications, so you should
 always use non-blocking calls when reading/writing from/to your file
 handles.
-Example:
-   # wait for readability of STDIN, then read a line and disable the watcher
+Example: wait for readability of STDIN, then read a line and disable the
+watcher.
    my $w; $w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {
       chomp (my $input = <STDIN>);
       warn "read: $input\n";
       undef $w;
    });
 Although the callback might get passed parameters, their value and
 presence is undefined and you cannot rely on them. Portable AnyEvent
 callbacks cannot use arguments passed to time watcher callbacks.
-The timer callback will be invoked at most once: if you want a repeating
+The callback will normally be invoked once only. If you specify another
-timer you have to create a new watcher (this is a limitation by both Tk
+parameter, C<interval>, as a strictly positive number (> 0), then the
-and Glib).
+callback will be invoked regularly at that interval (in fractional
+seconds) after the first invocation. If C<interval> is specified with a
+false value, then it is treated as if it were missing.
-Example:
+The callback will be rescheduled before invoking the callback, but no
+attempt is done to avoid timer drift in most backends, so the interval is
+only approximate.
-   # fire an event after 7.7 seconds
+Example: fire an event after 7.7 seconds.
    my $w = AnyEvent->timer (after => 7.7, cb => sub {
       warn "timeout\n";
    });
    # to cancel the timer:
    undef $w;
-Example 2:
-   # fire an event after 0.5 seconds, then roughly every second
+Example 2: fire an event after 0.5 seconds, then roughly every second.
-   my $w;
-   my $cb = sub {
-      # cancel the old timer while creating a new one
-      $w = AnyEvent->timer (after => 1, cb => $cb);
+   my $w = AnyEvent->timer (after => 0.5, interval => 1, cb => sub {
+      warn "timeout\n";
    };
-   # start the "loop" by creating the first watcher
-   $w = AnyEvent->timer (after => 0.5, cb => $cb);
 =head3 TIMING ISSUES
 There are two ways to handle timers: based on real time (relative, "fire
 in 10 seconds") and based on wallclock time (absolute, "fire at 12
 on true relative time) and absolute (ev_periodic, based on wallclock time)
 timers.
 AnyEvent always prefers relative timers, if available, matching the
 AnyEvent API.
+AnyEvent has two additional methods that return the "current time":
+=over 4
+=item AnyEvent->time
+This returns the "current wallclock time" as a fractional number of
+seconds since the Epoch (the same thing as C<time> or C<Time::HiRes::time>
+return, and the result is guaranteed to be compatible with those).
+It progresses independently of any event loop processing, i.e. each call
+will check the system clock, which usually gets updated frequently.
+=item AnyEvent->now
+This also returns the "current wallclock time", but unlike C<time>, above,
+this value might change only once per event loop iteration, depending on
+the event loop (most return the same time as C<time>, above). This is the
+time that AnyEvent's timers get scheduled against.
+I<In almost all cases (in all cases if you don't care), this is the
+function to call when you want to know the current time.>
+This function is also often faster then C<< AnyEvent->time >>, and
+thus the preferred method if you want some timestamp (for example,
+L<AnyEvent::Handle> uses this to update it's activity timeouts).
+The rest of this section is only of relevance if you try to be very exact
+with your timing, you can skip it without bad conscience.
+For a practical example of when these times differ, consider L<Event::Lib>
+and L<EV> and the following set-up:
+The event loop is running and has just invoked one of your callback at
+time=500 (assume no other callbacks delay processing). In your callback,
+you wait a second by executing C<sleep 1> (blocking the process for a
+second) and then (at time=501) you create a relative timer that fires
+after three seconds.
+With L<Event::Lib>, C<< AnyEvent->time >> and C<< AnyEvent->now >> will
+both return C<501>, because that is the current time, and the timer will
+be scheduled to fire at time=504 (C<501> + C<3>).
+With L<EV>, C<< AnyEvent->time >> returns C<501> (as that is the current
+time), but C<< AnyEvent->now >> returns C<500>, as that is the time the
+last event processing phase started. With L<EV>, your timer gets scheduled
+to run at time=503 (C<500> + C<3>).
+In one sense, L<Event::Lib> is more exact, as it uses the current time
+regardless of any delays introduced by event processing. However, most
+callbacks do not expect large delays in processing, so this causes a
+higher drift (and a lot more system calls to get the current time).
+In another sense, L<EV> is more exact, as your timer will be scheduled at
+the same time, regardless of how long event processing actually took.
+In either case, if you care (and in most cases, you don't), then you
+can get whatever behaviour you want with any event loop, by taking the
+difference between C<< AnyEvent->time >> and C<< AnyEvent->now >> into
+account.
+=back
 =head2 SIGNAL WATCHERS
 You can watch for signals using a signal watcher, C<signal> is the signal
 I<name> without any C<SIG> prefix, C<cb> is the Perl callback to
 AnyEvent program, you I<have> to create at least one watcher before you
 C<fork> the child (alternatively, you can call C<AnyEvent::detect>).
 Example: fork a process and wait for it
-  my $done = AnyEvent->condvar;
+   my $done = AnyEvent->condvar;
-  my $pid = fork or exit 5;
+   my $pid = fork or exit 5;
-  my $w = AnyEvent->child (
+   my $w = AnyEvent->child (
-     pid => $pid,
+      pid => $pid,
-     cb  => sub {
+      cb  => sub {
-        my ($pid, $status) = @_;
+         my ($pid, $status) = @_;
-        warn "pid $pid exited with status $status";
+         warn "pid $pid exited with status $status";
-        $done->send;
+         $done->send;
-     },
+      },
-  );
+   );
-  # do something else, then wait for process exit
+   # do something else, then wait for process exit
-  $done->recv;
+   $done->recv;
 =head2 CONDITION VARIABLES
 If you are familiar with some event loops you will know that all of them
 require you to run some blocking "loop", "run" or similar function that
 This is a mutator function that returns the callback set and optionally
 replaces it before doing so.
 The callback will be called when the condition becomes "true", i.e. when
-C<send> or C<croak> are called. Calling C<recv> inside the callback
+C<send> or C<croak> are called, with the only argument being the condition
-or at any later time is guaranteed not to block.
+variable itself. Calling C<recv> inside the callback or at any later time
+is guaranteed not to block.
 =back
 =head1 GLOBAL VARIABLES AND FUNCTIONS
 =item L<AnyEvent::Util>
 Contains various utility functions that replace often-used but blocking
 functions such as C<inet_aton> by event-/callback-based versions.
-=item L<AnyEvent::Handle>
-Provide read and write buffers and manages watchers for reads and writes.
 =item L<AnyEvent::Socket>
 Provides various utility functions for (internet protocol) sockets,
 addresses and name resolution. Also functions to create non-blocking tcp
 connections or tcp servers, with IPv6 and SRV record support and more.
+=item L<AnyEvent::Handle>
+Provide read and write buffers, manages watchers for reads and writes,
+supports raw and formatted I/O, I/O queued and fully transparent and
+non-blocking SSL/TLS.
 =item L<AnyEvent::DNS>
 Provides rich asynchronous DNS resolver capabilities.
+=item L<AnyEvent::HTTP>
+A simple-to-use HTTP library that is capable of making a lot of concurrent
+HTTP requests.
 =item L<AnyEvent::HTTPD>
 Provides a simple web application server framework.
 =item L<AnyEvent::FastPing>
 The fastest ping in the west.
+=item L<AnyEvent::DBI>
+Executes L<DBI> requests asynchronously in a proxy process.
+=item L<AnyEvent::AIO>
+Truly asynchronous I/O, should be in the toolbox of every event
+programmer. AnyEvent::AIO transparently fuses L<IO::AIO> and AnyEvent
+together.
+=item L<AnyEvent::BDB>
+Truly asynchronous Berkeley DB access. AnyEvent::BDB transparently fuses
+L<BDB> and AnyEvent together.
+=item L<AnyEvent::GPSD>
+A non-blocking interface to gpsd, a daemon delivering GPS information.
+=item L<AnyEvent::IGS>
+A non-blocking interface to the Internet Go Server protocol (used by
+L<App::IGS>).
 =item L<Net::IRC3>
 AnyEvent based IRC client module family.
 =item L<Coro>
 Has special support for AnyEvent via L<Coro::AnyEvent>.
-=item L<AnyEvent::AIO>, L<IO::AIO>
-Truly asynchronous I/O, should be in the toolbox of every event
-programmer. AnyEvent::AIO transparently fuses IO::AIO and AnyEvent
-together.
-=item L<AnyEvent::BDB>, L<BDB>
-Truly asynchronous Berkeley DB access. AnyEvent::AIO transparently fuses
-IO::AIO and AnyEvent together.
 =item L<IO::Lambda>
 The lambda approach to I/O - don't ask, look there. Can use AnyEvent.
 =back
 no warnings;
 use strict;
 use Carp;
-our $VERSION = '4.03';
+our $VERSION = 4.2;
 our $MODEL;
 our $AUTOLOAD;
 our @ISA;
 our @REGISTRY;
+our $WIN32;
+BEGIN {
+   my $win32 = ! ! ($^O =~ /mswin32/i);
+   eval "sub WIN32(){ $win32 }";
+}
 our $verbose = $ENV{PERL_ANYEVENT_VERBOSE}*1;
 our %PROTOCOL; # (ipv4|ipv6) => (1|2), higher numbers are preferred
    [POE::Kernel::          => AnyEvent::Impl::POE::],      # lasciate ogni speranza
    [Wx::                   => AnyEvent::Impl::POE::],
    [Prima::                => AnyEvent::Impl::POE::],
 );
-our %method = map +($_ => 1), qw(io timer signal child condvar one_event DESTROY);
+our %method = map +($_ => 1), qw(io timer time now signal child condvar one_event DESTROY);
 our @post_detect;
 sub post_detect(&) {
    my ($cb) = @_;
 }
 sub detect() {
    unless ($MODEL) {
       no strict 'refs';
+      local $SIG{__DIE__};
       if ($ENV{PERL_ANYEVENT_MODEL} =~ /^([a-zA-Z]+)$/) {
          my $model = "AnyEvent::Impl::$1";
          if (eval "require $model") {
             $MODEL = $model;
    $class->$func (@_);
 }
 package AnyEvent::Base;
+# default implementation for now and time
+use Time::HiRes ();
+sub time { Time::HiRes::time }
+sub now  { Time::HiRes::time }
 # default implementation for ->condvar
 sub condvar {
    bless { @_ == 3 ? (_ae_cb => $_[2]) : () }, AnyEvent::CondVar::
 }
 sub AnyEvent::Base::Signal::DESTROY {
    my ($signal, $cb) = @{$_[0]};
    delete $SIG_CB{$signal}{$cb};
-   $SIG{$signal} = 'DEFAULT' unless keys %{ $SIG_CB{$signal} };
+   delete $SIG{$signal} unless keys %{ $SIG_CB{$signal} };
 }
 # default implementation for ->child
 our %PID_CB;
       or Carp::croak "required option 'pid' is missing";
    $PID_CB{$pid}{$arg{cb}} = $arg{cb};
    unless ($WNOHANG) {
-      $WNOHANG = eval { require POSIX; &POSIX::WNOHANG } || 1;
+      $WNOHANG = eval { local $SIG{__DIE__}; require POSIX; &POSIX::WNOHANG } || 1;
    }
    unless ($CHLD_W) {
       $CHLD_W = AnyEvent->signal (signal => 'CHLD', cb => \&_sigchld);
       # child could be a zombie already, so make at least one round
 This functionality might change in future versions.
 For example, to force the pure perl model (L<AnyEvent::Impl::Perl>) you
 could start your program like this:
-  PERL_ANYEVENT_MODEL=Perl perl ...
+   PERL_ANYEVENT_MODEL=Perl perl ...
 =item C<PERL_ANYEVENT_PROTOCOLS>
 Used by both L<AnyEvent::DNS> and L<AnyEvent::Socket> to determine preferences
 for IPv4 or IPv6. The default is unspecified (and might change, or be the result
 some (broken) firewalls drop such DNS packets, which is why it is off by
 default.
 Setting this variable to C<1> will cause L<AnyEvent::DNS> to announce
 EDNS0 in its DNS requests.
+=item C<PERL_ANYEVENT_MAX_FORKS>
+The maximum number of child processes that C<AnyEvent::Util::fork_call>
+will create in parallel.
 =back
 =head1 EXAMPLE PROGRAM
 specified in the variable.
 You can make AnyEvent completely ignore this variable by deleting it
 before the first watcher gets created, e.g. with a C<BEGIN> block:
-  BEGIN { delete $ENV{PERL_ANYEVENT_MODEL} }
+   BEGIN { delete $ENV{PERL_ANYEVENT_MODEL} }
-  use AnyEvent;
+   use AnyEvent;
 Similar considerations apply to $ENV{PERL_ANYEVENT_VERBOSE}, as that can
 be used to probe what backend is used and gain other information (which is
 probably even less useful to an attacker than PERL_ANYEVENT_MODEL).
+=head1 BUGS
+Perl 5.8 has numerous memleaks that sometimes hit this module and are hard
+to work around. If you suffer from memleaks, first upgrade to Perl 5.10
+and check wether the leaks still show up. (Perl 5.10.0 has other annoying
+mamleaks, such as leaking on C<map> and C<grep> but it is usually not as
+pronounced).
 =head1 SEE ALSO
 Utility functions: L<AnyEvent::Util>.
 Nontrivial usage examples: L<Net::FCP>, L<Net::XMPP2>, L<AnyEvent::DNS>.
 =head1 AUTHOR
- Marc Lehmann <schmorp@schmorp.de>
+   Marc Lehmann <schmorp@schmorp.de>
- http://home.schmorp.de/
+   http://home.schmorp.de/
 =cut
 1

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent.pm (file contents): Revision 1.136 by root, Sun May 25 23:52:02 2008 UTC vs. Revision 1.165 by root, Tue Jul 8 23:07:26 2008 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent.pm (file contents):
Revision 1.136 by root, Sun May 25 23:52:02 2008 UTC vs.
Revision 1.165 by root, Tue Jul 8 23:07:26 2008 UTC