[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent.pm

Comparing AnyEvent/lib/AnyEvent.pm (file contents):
Revision 1.98 by root, Sun Apr 27 16:31:48 2008 UTC vs.
Revision 1.168 by root, Tue Jul 8 23:53:37 2008 UTC

…		…
1	=head1 NAME	1	=head1 NAME
2		2
3	AnyEvent - provide framework for multiple event loops	3	AnyEvent - provide framework for multiple event loops
4		4
5	EV, Event, Coro::EV, Coro::Event, Glib, Tk, Perl, Event::Lib, Qt, POE - various supported event loops	5	EV, Event, Glib, Tk, Perl, Event::Lib, Qt, POE - various supported event loops
6		6
7	=head1 SYNOPSIS	7	=head1 SYNOPSIS
8		8
9	use AnyEvent;	9	use AnyEvent;
10		10
15	my $w = AnyEvent->timer (after => $seconds, cb => sub {	15	my $w = AnyEvent->timer (after => $seconds, cb => sub {
16	...	16	...
17	});	17	});
18		18
19	my $w = AnyEvent->condvar; # stores whether a condition was flagged	19	my $w = AnyEvent->condvar; # stores whether a condition was flagged
		20	$w->send; # wake up current and all future recv's
20	$w->wait; # enters "main loop" till $condvar gets ->broadcast	21	$w->recv; # enters "main loop" till $condvar gets ->send
21	$w->broadcast; # wake up current and all future wait's	22
		23	=head1 INTRODUCTION/TUTORIAL
		24
		25	This manpage is mainly a reference manual. If you are interested
		26	in a tutorial or some gentle introduction, have a look at the
		27	L<AnyEvent::Intro> manpage.
22		28
23	=head1 WHY YOU SHOULD USE THIS MODULE (OR NOT)	29	=head1 WHY YOU SHOULD USE THIS MODULE (OR NOT)
24		30
25	Glib, POE, IO::Async, Event... CPAN offers event models by the dozen	31	Glib, POE, IO::Async, Event... CPAN offers event models by the dozen
26	nowadays. So what is different about AnyEvent?	32	nowadays. So what is different about AnyEvent?
27		33
28	Executive Summary: AnyEvent is I<compatible>, AnyEvent is I<free of	34	Executive Summary: AnyEvent is I<compatible>, AnyEvent is I<free of
29	policy> and AnyEvent is I<small and efficient>.	35	policy> and AnyEvent is I<small and efficient>.
30		36
31	First and foremost, I<AnyEvent is not an event model> itself, it only	37	First and foremost, I<AnyEvent is not an event model> itself, it only
32	interfaces to whatever event model the main program happens to use in a	38	interfaces to whatever event model the main program happens to use, in a
33	pragmatic way. For event models and certain classes of immortals alike,	39	pragmatic way. For event models and certain classes of immortals alike,
34	the statement "there can only be one" is a bitter reality: In general,	40	the statement "there can only be one" is a bitter reality: In general,
35	only one event loop can be active at the same time in a process. AnyEvent	41	only one event loop can be active at the same time in a process. AnyEvent
36	helps hiding the differences between those event loops.	42	cannot change this, but it can hide the differences between those event
		43	loops.
37		44
38	The goal of AnyEvent is to offer module authors the ability to do event	45	The goal of AnyEvent is to offer module authors the ability to do event
39	programming (waiting for I/O or timer events) without subscribing to a	46	programming (waiting for I/O or timer events) without subscribing to a
40	religion, a way of living, and most importantly: without forcing your	47	religion, a way of living, and most importantly: without forcing your
41	module users into the same thing by forcing them to use the same event	48	module users into the same thing by forcing them to use the same event
42	model you use.	49	model you use.
43		50
44	For modules like POE or IO::Async (which is a total misnomer as it is	51	For modules like POE or IO::Async (which is a total misnomer as it is
45	actually doing all I/O I<synchronously>...), using them in your module is	52	actually doing all I/O I<synchronously>...), using them in your module is
46	like joining a cult: After you joined, you are dependent on them and you	53	like joining a cult: After you joined, you are dependent on them and you
47	cannot use anything else, as it is simply incompatible to everything that	54	cannot use anything else, as they are simply incompatible to everything
48	isn't itself. What's worse, all the potential users of your module are	55	that isn't them. What's worse, all the potential users of your
49	I<also> forced to use the same event loop you use.	56	module are I<also> forced to use the same event loop you use.
50		57
51	AnyEvent is different: AnyEvent + POE works fine. AnyEvent + Glib works	58	AnyEvent is different: AnyEvent + POE works fine. AnyEvent + Glib works
52	fine. AnyEvent + Tk works fine etc. etc. but none of these work together	59	fine. AnyEvent + Tk works fine etc. etc. but none of these work together
53	with the rest: POE + IO::Async? no go. Tk + Event? no go. Again: if	60	with the rest: POE + IO::Async? No go. Tk + Event? No go. Again: if
54	your module uses one of those, every user of your module has to use it,	61	your module uses one of those, every user of your module has to use it,
55	too. But if your module uses AnyEvent, it works transparently with all	62	too. But if your module uses AnyEvent, it works transparently with all
56	event models it supports (including stuff like POE and IO::Async, as long	63	event models it supports (including stuff like IO::Async, as long as those
57	as those use one of the supported event loops. It is trivial to add new	64	use one of the supported event loops. It is trivial to add new event loops
58	event loops to AnyEvent, too, so it is future-proof).	65	to AnyEvent, too, so it is future-proof).
59		66
60	In addition to being free of having to use I<the one and only true event	67	In addition to being free of having to use I<the one and only true event
61	model>, AnyEvent also is free of bloat and policy: with POE or similar	68	model>, AnyEvent also is free of bloat and policy: with POE or similar
62	modules, you get an enourmous amount of code and strict rules you have to	69	modules, you get an enormous amount of code and strict rules you have to
63	follow. AnyEvent, on the other hand, is lean and up to the point, by only	70	follow. AnyEvent, on the other hand, is lean and up to the point, by only
64	offering the functionality that is necessary, in as thin as a wrapper as	71	offering the functionality that is necessary, in as thin as a wrapper as
65	technically possible.	72	technically possible.
66		73
		74	Of course, AnyEvent comes with a big (and fully optional!) toolbox
		75	of useful functionality, such as an asynchronous DNS resolver, 100%
		76	non-blocking connects (even with TLS/SSL, IPv6 and on broken platforms
		77	such as Windows) and lots of real-world knowledge and workarounds for
		78	platform bugs and differences.
		79
67	Of course, if you want lots of policy (this can arguably be somewhat	80	Now, if you I<do want> lots of policy (this can arguably be somewhat
68	useful) and you want to force your users to use the one and only event	81	useful) and you want to force your users to use the one and only event
69	model, you should I<not> use this module.	82	model, you should I<not> use this module.
70
71	#TODO#
72
73	Net::IRC3
74	AnyEvent::HTTPD
75	AnyEvent::DNS
76	IO::AnyEvent
77	Net::FPing
78	Net::XMPP2
79	Coro
80
81	AnyEvent::IRC
82	AnyEvent::HTTPD
83	AnyEvent::DNS
84	AnyEvent::Handle
85	AnyEvent::Socket
86	AnyEvent::FPing
87	AnyEvent::XMPP
88	AnyEvent::SNMP
89	Coro
90		83
91	=head1 DESCRIPTION	84	=head1 DESCRIPTION
92		85
93	L<AnyEvent> provides an identical interface to multiple event loops. This	86	L<AnyEvent> provides an identical interface to multiple event loops. This
94	allows module authors to utilise an event loop without forcing module	87	allows module authors to utilise an event loop without forcing module
…		…
98	The interface itself is vaguely similar, but not identical to the L<Event>	91	The interface itself is vaguely similar, but not identical to the L<Event>
99	module.	92	module.
100		93
101	During the first call of any watcher-creation method, the module tries	94	During the first call of any watcher-creation method, the module tries
102	to detect the currently loaded event loop by probing whether one of the	95	to detect the currently loaded event loop by probing whether one of the
103	following modules is already loaded: L<Coro::EV>, L<Coro::Event>, L<EV>,	96	following modules is already loaded: L<EV>,
104	L<Event>, L<Glib>, L<AnyEvent::Impl::Perl>, L<Tk>, L<Event::Lib>, L<Qt>,	97	L<Event>, L<Glib>, L<AnyEvent::Impl::Perl>, L<Tk>, L<Event::Lib>, L<Qt>,
105	L<POE>. The first one found is used. If none are found, the module tries	98	L<POE>. The first one found is used. If none are found, the module tries
106	to load these modules (excluding Tk, Event::Lib, Qt and POE as the pure perl	99	to load these modules (excluding Tk, Event::Lib, Qt and POE as the pure perl
107	adaptor should always succeed) in the order given. The first one that can	100	adaptor should always succeed) in the order given. The first one that can
108	be successfully loaded will be used. If, after this, still none could be	101	be successfully loaded will be used. If, after this, still none could be
…		…
122	starts using it, all bets are off. Maybe you should tell their authors to	115	starts using it, all bets are off. Maybe you should tell their authors to
123	use AnyEvent so their modules work together with others seamlessly...	116	use AnyEvent so their modules work together with others seamlessly...
124		117
125	The pure-perl implementation of AnyEvent is called	118	The pure-perl implementation of AnyEvent is called
126	C<AnyEvent::Impl::Perl>. Like other event modules you can load it	119	C<AnyEvent::Impl::Perl>. Like other event modules you can load it
127	explicitly.	120	explicitly and enjoy the high availability of that event loop :)
128		121
129	=head1 WATCHERS	122	=head1 WATCHERS
130		123
131	AnyEvent has the central concept of a I<watcher>, which is an object that	124	AnyEvent has the central concept of a I<watcher>, which is an object that
132	stores relevant data for each kind of event you are waiting for, such as	125	stores relevant data for each kind of event you are waiting for, such as
133	the callback to call, the filehandle to watch, etc.	126	the callback to call, the file handle to watch, etc.
134		127
135	These watchers are normal Perl objects with normal Perl lifetime. After	128	These watchers are normal Perl objects with normal Perl lifetime. After
136	creating a watcher it will immediately "watch" for events and invoke the	129	creating a watcher it will immediately "watch" for events and invoke the
137	callback when the event occurs (of course, only when the event model	130	callback when the event occurs (of course, only when the event model
138	is in control).	131	is in control).
…		…
146	Many watchers either are used with "recursion" (repeating timers for	139	Many watchers either are used with "recursion" (repeating timers for
147	example), or need to refer to their watcher object in other ways.	140	example), or need to refer to their watcher object in other ways.
148		141
149	An any way to achieve that is this pattern:	142	An any way to achieve that is this pattern:
150		143
151	my $w; $w = AnyEvent->type (arg => value ..., cb => sub {	144	my $w; $w = AnyEvent->type (arg => value ..., cb => sub {
152	# you can use $w here, for example to undef it	145	# you can use $w here, for example to undef it
153	undef $w;	146	undef $w;
154	});	147	});
155		148
156	Note that C<my $w; $w => combination. This is necessary because in Perl,	149	Note that C<my $w; $w => combination. This is necessary because in Perl,
157	my variables are only visible after the statement in which they are	150	my variables are only visible after the statement in which they are
158	declared.	151	declared.
159		152
160	=head2 I/O WATCHERS	153	=head2 I/O WATCHERS
161		154
162	You can create an I/O watcher by calling the C<< AnyEvent->io >> method	155	You can create an I/O watcher by calling the C<< AnyEvent->io >> method
163	with the following mandatory key-value pairs as arguments:	156	with the following mandatory key-value pairs as arguments:
164		157
165	C<fh> the Perl I<file handle> (I<not> file descriptor) to watch	158	C<fh> the Perl I<file handle> (I<not> file descriptor) to watch for events
166	for events. C<poll> must be a string that is either C<r> or C<w>,	159	(AnyEvent might or might not keep a reference to this file handle). C<poll>
167	which creates a watcher waiting for "r"eadable or "w"ritable events,	160	must be a string that is either C<r> or C<w>, which creates a watcher
168	respectively. C<cb> is the callback to invoke each time the file handle	161	waiting for "r"eadable or "w"ritable events, respectively. C<cb> is the
169	becomes ready.	162	callback to invoke each time the file handle becomes ready.
170		163
171	Although the callback might get passed parameters, their value and	164	Although the callback might get passed parameters, their value and
172	presence is undefined and you cannot rely on them. Portable AnyEvent	165	presence is undefined and you cannot rely on them. Portable AnyEvent
173	callbacks cannot use arguments passed to I/O watcher callbacks.	166	callbacks cannot use arguments passed to I/O watcher callbacks.
174		167
…		…
178		171
179	Some event loops issue spurious readyness notifications, so you should	172	Some event loops issue spurious readyness notifications, so you should
180	always use non-blocking calls when reading/writing from/to your file	173	always use non-blocking calls when reading/writing from/to your file
181	handles.	174	handles.
182		175
183	Example:
184
185	# wait for readability of STDIN, then read a line and disable the watcher	176	Example: wait for readability of STDIN, then read a line and disable the
		177	watcher.
		178
186	my $w; $w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {	179	my $w; $w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {
187	chomp (my $input = <STDIN>);	180	chomp (my $input = <STDIN>);
188	warn "read: $input\n";	181	warn "read: $input\n";
189	undef $w;	182	undef $w;
190	});	183	});
…		…
200		193
201	Although the callback might get passed parameters, their value and	194	Although the callback might get passed parameters, their value and
202	presence is undefined and you cannot rely on them. Portable AnyEvent	195	presence is undefined and you cannot rely on them. Portable AnyEvent
203	callbacks cannot use arguments passed to time watcher callbacks.	196	callbacks cannot use arguments passed to time watcher callbacks.
204		197
205	The timer callback will be invoked at most once: if you want a repeating	198	The callback will normally be invoked once only. If you specify another
206	timer you have to create a new watcher (this is a limitation by both Tk	199	parameter, C<interval>, as a strictly positive number (> 0), then the
207	and Glib).	200	callback will be invoked regularly at that interval (in fractional
		201	seconds) after the first invocation. If C<interval> is specified with a
		202	false value, then it is treated as if it were missing.
208		203
209	Example:	204	The callback will be rescheduled before invoking the callback, but no
		205	attempt is done to avoid timer drift in most backends, so the interval is
		206	only approximate.
210		207
211	# fire an event after 7.7 seconds	208	Example: fire an event after 7.7 seconds.
		209
212	my $w = AnyEvent->timer (after => 7.7, cb => sub {	210	my $w = AnyEvent->timer (after => 7.7, cb => sub {
213	warn "timeout\n";	211	warn "timeout\n";
214	});	212	});
215		213
216	# to cancel the timer:	214	# to cancel the timer:
217	undef $w;	215	undef $w;
218		216
219	Example 2:
220
221	# fire an event after 0.5 seconds, then roughly every second	217	Example 2: fire an event after 0.5 seconds, then roughly every second.
222	my $w;
223		218
224	my $cb = sub {
225	# cancel the old timer while creating a new one
226	$w = AnyEvent->timer (after => 1, cb => $cb);	219	my $w = AnyEvent->timer (after => 0.5, interval => 1, cb => sub {
		220	warn "timeout\n";
227	};	221	};
228
229	# start the "loop" by creating the first watcher
230	$w = AnyEvent->timer (after => 0.5, cb => $cb);
231		222
232	=head3 TIMING ISSUES	223	=head3 TIMING ISSUES
233		224
234	There are two ways to handle timers: based on real time (relative, "fire	225	There are two ways to handle timers: based on real time (relative, "fire
235	in 10 seconds") and based on wallclock time (absolute, "fire at 12	226	in 10 seconds") and based on wallclock time (absolute, "fire at 12
…		…
247	timers.	238	timers.
248		239
249	AnyEvent always prefers relative timers, if available, matching the	240	AnyEvent always prefers relative timers, if available, matching the
250	AnyEvent API.	241	AnyEvent API.
251		242
		243	AnyEvent has two additional methods that return the "current time":
		244
		245	=over 4
		246
		247	=item AnyEvent->time
		248
		249	This returns the "current wallclock time" as a fractional number of
		250	seconds since the Epoch (the same thing as C<time> or C<Time::HiRes::time>
		251	return, and the result is guaranteed to be compatible with those).
		252
		253	It progresses independently of any event loop processing, i.e. each call
		254	will check the system clock, which usually gets updated frequently.
		255
		256	=item AnyEvent->now
		257
		258	This also returns the "current wallclock time", but unlike C<time>, above,
		259	this value might change only once per event loop iteration, depending on
		260	the event loop (most return the same time as C<time>, above). This is the
		261	time that AnyEvent's timers get scheduled against.
		262
		263	I<In almost all cases (in all cases if you don't care), this is the
		264	function to call when you want to know the current time.>
		265
		266	This function is also often faster then C<< AnyEvent->time >>, and
		267	thus the preferred method if you want some timestamp (for example,
		268	L<AnyEvent::Handle> uses this to update it's activity timeouts).
		269
		270	The rest of this section is only of relevance if you try to be very exact
		271	with your timing, you can skip it without bad conscience.
		272
		273	For a practical example of when these times differ, consider L<Event::Lib>
		274	and L<EV> and the following set-up:
		275
		276	The event loop is running and has just invoked one of your callback at
		277	time=500 (assume no other callbacks delay processing). In your callback,
		278	you wait a second by executing C<sleep 1> (blocking the process for a
		279	second) and then (at time=501) you create a relative timer that fires
		280	after three seconds.
		281
		282	With L<Event::Lib>, C<< AnyEvent->time >> and C<< AnyEvent->now >> will
		283	both return C<501>, because that is the current time, and the timer will
		284	be scheduled to fire at time=504 (C<501> + C<3>).
		285
		286	With L<EV>, C<< AnyEvent->time >> returns C<501> (as that is the current
		287	time), but C<< AnyEvent->now >> returns C<500>, as that is the time the
		288	last event processing phase started. With L<EV>, your timer gets scheduled
		289	to run at time=503 (C<500> + C<3>).
		290
		291	In one sense, L<Event::Lib> is more exact, as it uses the current time
		292	regardless of any delays introduced by event processing. However, most
		293	callbacks do not expect large delays in processing, so this causes a
		294	higher drift (and a lot more system calls to get the current time).
		295
		296	In another sense, L<EV> is more exact, as your timer will be scheduled at
		297	the same time, regardless of how long event processing actually took.
		298
		299	In either case, if you care (and in most cases, you don't), then you
		300	can get whatever behaviour you want with any event loop, by taking the
		301	difference between C<< AnyEvent->time >> and C<< AnyEvent->now >> into
		302	account.
		303
		304	=back
		305
252	=head2 SIGNAL WATCHERS	306	=head2 SIGNAL WATCHERS
253		307
254	You can watch for signals using a signal watcher, C<signal> is the signal	308	You can watch for signals using a signal watcher, C<signal> is the signal
255	I<name> without any C<SIG> prefix, C<cb> is the Perl callback to	309	I<name> in uppercase and without any C<SIG> prefix, C<cb> is the Perl
256	be invoked whenever a signal occurs.	310	callback to be invoked whenever a signal occurs.
257		311
258	Although the callback might get passed parameters, their value and	312	Although the callback might get passed parameters, their value and
259	presence is undefined and you cannot rely on them. Portable AnyEvent	313	presence is undefined and you cannot rely on them. Portable AnyEvent
260	callbacks cannot use arguments passed to signal watcher callbacks.	314	callbacks cannot use arguments passed to signal watcher callbacks.
261		315
262	Multiple signal occurances can be clumped together into one callback	316	Multiple signal occurrences can be clumped together into one callback
263	invocation, and callback invocation will be synchronous. synchronous means	317	invocation, and callback invocation will be synchronous. Synchronous means
264	that it might take a while until the signal gets handled by the process,	318	that it might take a while until the signal gets handled by the process,
265	but it is guarenteed not to interrupt any other callbacks.	319	but it is guaranteed not to interrupt any other callbacks.
266		320
267	The main advantage of using these watchers is that you can share a signal	321	The main advantage of using these watchers is that you can share a signal
268	between multiple watchers.	322	between multiple watchers.
269		323
270	This watcher might use C<%SIG>, so programs overwriting those signals	324	This watcher might use C<%SIG>, so programs overwriting those signals
…		…
297	AnyEvent program, you I<have> to create at least one watcher before you	351	AnyEvent program, you I<have> to create at least one watcher before you
298	C<fork> the child (alternatively, you can call C<AnyEvent::detect>).	352	C<fork> the child (alternatively, you can call C<AnyEvent::detect>).
299		353
300	Example: fork a process and wait for it	354	Example: fork a process and wait for it
301		355
302	my $done = AnyEvent->condvar;	356	my $done = AnyEvent->condvar;
303		357
304	AnyEvent::detect; # force event module to be initialised
305
306	my $pid = fork or exit 5;	358	my $pid = fork or exit 5;
307		359
308	my $w = AnyEvent->child (	360	my $w = AnyEvent->child (
309	pid => $pid,	361	pid => $pid,
310	cb => sub {	362	cb => sub {
311	my ($pid, $status) = @_;	363	my ($pid, $status) = @_;
312	warn "pid $pid exited with status $status";	364	warn "pid $pid exited with status $status";
313	$done->broadcast;	365	$done->send;
314	},	366	},
315	);	367	);
316		368
317	# do something else, then wait for process exit	369	# do something else, then wait for process exit
318	$done->wait;	370	$done->recv;
319		371
320	=head2 CONDITION VARIABLES	372	=head2 CONDITION VARIABLES
321		373
		374	If you are familiar with some event loops you will know that all of them
		375	require you to run some blocking "loop", "run" or similar function that
		376	will actively watch for new events and call your callbacks.
		377
		378	AnyEvent is different, it expects somebody else to run the event loop and
		379	will only block when necessary (usually when told by the user).
		380
		381	The instrument to do that is called a "condition variable", so called
		382	because they represent a condition that must become true.
		383
322	Condition variables can be created by calling the C<< AnyEvent->condvar >>	384	Condition variables can be created by calling the C<< AnyEvent->condvar
323	method without any arguments.	385	>> method, usually without arguments. The only argument pair allowed is
		386	C<cb>, which specifies a callback to be called when the condition variable
		387	becomes true.
324		388
325	A condition variable waits for a condition - precisely that the C<<	389	After creation, the condition variable is "false" until it becomes "true"
326	->broadcast >> method has been called.	390	by calling the C<send> method (or calling the condition variable as if it
		391	were a callback, read about the caveats in the description for the C<<
		392	->send >> method).
327		393
328	They are very useful to signal that a condition has been fulfilled, for	394	Condition variables are similar to callbacks, except that you can
		395	optionally wait for them. They can also be called merge points - points
		396	in time where multiple outstanding events have been processed. And yet
		397	another way to call them is transactions - each condition variable can be
		398	used to represent a transaction, which finishes at some point and delivers
		399	a result.
		400
		401	Condition variables are very useful to signal that something has finished,
329	example, if you write a module that does asynchronous http requests,	402	for example, if you write a module that does asynchronous http requests,
330	then a condition variable would be the ideal candidate to signal the	403	then a condition variable would be the ideal candidate to signal the
331	availability of results.	404	availability of results. The user can either act when the callback is
		405	called or can synchronously C<< ->recv >> for the results.
332		406
333	You can also use condition variables to block your main program until	407	You can also use them to simulate traditional event loops - for example,
334	an event occurs - for example, you could C<< ->wait >> in your main	408	you can block your main program until an event occurs - for example, you
335	program until the user clicks the Quit button in your app, which would C<<	409	could C<< ->recv >> in your main program until the user clicks the Quit
336	->broadcast >> the "quit" event.	410	button of your app, which would C<< ->send >> the "quit" event.
337		411
338	Note that condition variables recurse into the event loop - if you have	412	Note that condition variables recurse into the event loop - if you have
339	two pirces of code that call C<< ->wait >> in a round-robbin fashion, you	413	two pieces of code that call C<< ->recv >> in a round-robin fashion, you
340	lose. Therefore, condition variables are good to export to your caller, but	414	lose. Therefore, condition variables are good to export to your caller, but
341	you should avoid making a blocking wait yourself, at least in callbacks,	415	you should avoid making a blocking wait yourself, at least in callbacks,
342	as this asks for trouble.	416	as this asks for trouble.
343		417
344	This object has two methods:	418	Condition variables are represented by hash refs in perl, and the keys
		419	used by AnyEvent itself are all named C<_ae_XXX> to make subclassing
		420	easy (it is often useful to build your own transaction class on top of
		421	AnyEvent). To subclass, use C<AnyEvent::CondVar> as base class and call
		422	it's C<new> method in your own C<new> method.
		423
		424	There are two "sides" to a condition variable - the "producer side" which
		425	eventually calls C<< -> send >>, and the "consumer side", which waits
		426	for the send to occur.
		427
		428	Example: wait for a timer.
		429
		430	# wait till the result is ready
		431	my $result_ready = AnyEvent->condvar;
		432
		433	# do something such as adding a timer
		434	# or socket watcher the calls $result_ready->send
		435	# when the "result" is ready.
		436	# in this case, we simply use a timer:
		437	my $w = AnyEvent->timer (
		438	after => 1,
		439	cb => sub { $result_ready->send },
		440	);
		441
		442	# this "blocks" (while handling events) till the callback
		443	# calls send
		444	$result_ready->recv;
		445
		446	Example: wait for a timer, but take advantage of the fact that
		447	condition variables are also code references.
		448
		449	my $done = AnyEvent->condvar;
		450	my $delay = AnyEvent->timer (after => 5, cb => $done);
		451	$done->recv;
		452
		453	=head3 METHODS FOR PRODUCERS
		454
		455	These methods should only be used by the producing side, i.e. the
		456	code/module that eventually sends the signal. Note that it is also
		457	the producer side which creates the condvar in most cases, but it isn't
		458	uncommon for the consumer to create it as well.
345		459
346	=over 4	460	=over 4
347		461
		462	=item $cv->send (...)
		463
		464	Flag the condition as ready - a running C<< ->recv >> and all further
		465	calls to C<recv> will (eventually) return after this method has been
		466	called. If nobody is waiting the send will be remembered.
		467
		468	If a callback has been set on the condition variable, it is called
		469	immediately from within send.
		470
		471	Any arguments passed to the C<send> call will be returned by all
		472	future C<< ->recv >> calls.
		473
		474	Condition variables are overloaded so one can call them directly
		475	(as a code reference). Calling them directly is the same as calling
		476	C<send>. Note, however, that many C-based event loops do not handle
		477	overloading, so as tempting as it may be, passing a condition variable
		478	instead of a callback does not work. Both the pure perl and EV loops
		479	support overloading, however, as well as all functions that use perl to
		480	invoke a callback (as in L<AnyEvent::Socket> and L<AnyEvent::DNS> for
		481	example).
		482
		483	=item $cv->croak ($error)
		484
		485	Similar to send, but causes all call's to C<< ->recv >> to invoke
		486	C<Carp::croak> with the given error message/object/scalar.
		487
		488	This can be used to signal any errors to the condition variable
		489	user/consumer.
		490
		491	=item $cv->begin ([group callback])
		492
348	=item $cv->wait	493	=item $cv->end
349		494
350	Wait (blocking if necessary) until the C<< ->broadcast >> method has been	495	These two methods are EXPERIMENTAL and MIGHT CHANGE.
		496
		497	These two methods can be used to combine many transactions/events into
		498	one. For example, a function that pings many hosts in parallel might want
		499	to use a condition variable for the whole process.
		500
		501	Every call to C<< ->begin >> will increment a counter, and every call to
		502	C<< ->end >> will decrement it. If the counter reaches C<0> in C<< ->end
		503	>>, the (last) callback passed to C<begin> will be executed. That callback
		504	is I<supposed> to call C<< ->send >>, but that is not required. If no
		505	callback was set, C<send> will be called without any arguments.
		506
		507	Let's clarify this with the ping example:
		508
		509	my $cv = AnyEvent->condvar;
		510
		511	my %result;
		512	$cv->begin (sub { $cv->send (\%result) });
		513
		514	for my $host (@list_of_hosts) {
		515	$cv->begin;
		516	ping_host_then_call_callback $host, sub {
		517	$result{$host} = ...;
		518	$cv->end;
		519	};
		520	}
		521
		522	$cv->end;
		523
		524	This code fragment supposedly pings a number of hosts and calls
		525	C<send> after results for all then have have been gathered - in any
		526	order. To achieve this, the code issues a call to C<begin> when it starts
		527	each ping request and calls C<end> when it has received some result for
		528	it. Since C<begin> and C<end> only maintain a counter, the order in which
		529	results arrive is not relevant.
		530
		531	There is an additional bracketing call to C<begin> and C<end> outside the
		532	loop, which serves two important purposes: first, it sets the callback
		533	to be called once the counter reaches C<0>, and second, it ensures that
		534	C<send> is called even when C<no> hosts are being pinged (the loop
		535	doesn't execute once).
		536
		537	This is the general pattern when you "fan out" into multiple subrequests:
		538	use an outer C<begin>/C<end> pair to set the callback and ensure C<end>
		539	is called at least once, and then, for each subrequest you start, call
		540	C<begin> and for each subrequest you finish, call C<end>.
		541
		542	=back
		543
		544	=head3 METHODS FOR CONSUMERS
		545
		546	These methods should only be used by the consuming side, i.e. the
		547	code awaits the condition.
		548
		549	=over 4
		550
		551	=item $cv->recv
		552
		553	Wait (blocking if necessary) until the C<< ->send >> or C<< ->croak
351	called on c<$cv>, while servicing other watchers normally.	554	>> methods have been called on c<$cv>, while servicing other watchers
		555	normally.
352		556
353	You can only wait once on a condition - additional calls will return	557	You can only wait once on a condition - additional calls are valid but
354	immediately.	558	will return immediately.
		559
		560	If an error condition has been set by calling C<< ->croak >>, then this
		561	function will call C<croak>.
		562
		563	In list context, all parameters passed to C<send> will be returned,
		564	in scalar context only the first one will be returned.
355		565
356	Not all event models support a blocking wait - some die in that case	566	Not all event models support a blocking wait - some die in that case
357	(programs might want to do that to stay interactive), so I<if you are	567	(programs might want to do that to stay interactive), so I<if you are
358	using this from a module, never require a blocking wait>, but let the	568	using this from a module, never require a blocking wait>, but let the
359	caller decide whether the call will block or not (for example, by coupling	569	caller decide whether the call will block or not (for example, by coupling
360	condition variables with some kind of request results and supporting	570	condition variables with some kind of request results and supporting
361	callbacks so the caller knows that getting the result will not block,	571	callbacks so the caller knows that getting the result will not block,
362	while still suppporting blocking waits if the caller so desires).	572	while still supporting blocking waits if the caller so desires).
363		573
364	Another reason I<never> to C<< ->wait >> in a module is that you cannot	574	Another reason I<never> to C<< ->recv >> in a module is that you cannot
365	sensibly have two C<< ->wait >>'s in parallel, as that would require	575	sensibly have two C<< ->recv >>'s in parallel, as that would require
366	multiple interpreters or coroutines/threads, none of which C<AnyEvent>	576	multiple interpreters or coroutines/threads, none of which C<AnyEvent>
367	can supply (the coroutine-aware backends L<AnyEvent::Impl::CoroEV> and	577	can supply.
368	L<AnyEvent::Impl::CoroEvent> explicitly support concurrent C<< ->wait >>'s
369	from different coroutines, however).
370		578
371	=item $cv->broadcast	579	The L<Coro> module, however, I<can> and I<does> supply coroutines and, in
		580	fact, L<Coro::AnyEvent> replaces AnyEvent's condvars by coroutine-safe
		581	versions and also integrates coroutines into AnyEvent, making blocking
		582	C<< ->recv >> calls perfectly safe as long as they are done from another
		583	coroutine (one that doesn't run the event loop).
372		584
373	Flag the condition as ready - a running C<< ->wait >> and all further	585	You can ensure that C<< -recv >> never blocks by setting a callback and
374	calls to C<wait> will (eventually) return after this method has been	586	only calling C<< ->recv >> from within that callback (or at a later
375	called. If nobody is waiting the broadcast will be remembered..	587	time). This will work even when the event loop does not support blocking
		588	waits otherwise.
		589
		590	=item $bool = $cv->ready
		591
		592	Returns true when the condition is "true", i.e. whether C<send> or
		593	C<croak> have been called.
		594
		595	=item $cb = $cv->cb ([new callback])
		596
		597	This is a mutator function that returns the callback set and optionally
		598	replaces it before doing so.
		599
		600	The callback will be called when the condition becomes "true", i.e. when
		601	C<send> or C<croak> are called, with the only argument being the condition
		602	variable itself. Calling C<recv> inside the callback or at any later time
		603	is guaranteed not to block.
376		604
377	=back	605	=back
378
379	Example:
380
381	# wait till the result is ready
382	my $result_ready = AnyEvent->condvar;
383
384	# do something such as adding a timer
385	# or socket watcher the calls $result_ready->broadcast
386	# when the "result" is ready.
387	# in this case, we simply use a timer:
388	my $w = AnyEvent->timer (
389	after => 1,
390	cb => sub { $result_ready->broadcast },
391	);
392
393	# this "blocks" (while handling events) till the watcher
394	# calls broadcast
395	$result_ready->wait;
396		606
397	=head1 GLOBAL VARIABLES AND FUNCTIONS	607	=head1 GLOBAL VARIABLES AND FUNCTIONS
398		608
399	=over 4	609	=over 4
400		610
…		…
406	C<AnyEvent::Impl:xxx> modules, but can be any other class in the case	616	C<AnyEvent::Impl:xxx> modules, but can be any other class in the case
407	AnyEvent has been extended at runtime (e.g. in I<rxvt-unicode>).	617	AnyEvent has been extended at runtime (e.g. in I<rxvt-unicode>).
408		618
409	The known classes so far are:	619	The known classes so far are:
410		620
411	AnyEvent::Impl::CoroEV based on Coro::EV, best choice.
412	AnyEvent::Impl::CoroEvent based on Coro::Event, second best choice.
413	AnyEvent::Impl::EV based on EV (an interface to libev, best choice).	621	AnyEvent::Impl::EV based on EV (an interface to libev, best choice).
414	AnyEvent::Impl::Event based on Event, second best choice.	622	AnyEvent::Impl::Event based on Event, second best choice.
		623	AnyEvent::Impl::Perl pure-perl implementation, fast and portable.
415	AnyEvent::Impl::Glib based on Glib, third-best choice.	624	AnyEvent::Impl::Glib based on Glib, third-best choice.
416	AnyEvent::Impl::Perl pure-perl implementation, inefficient but portable.
417	AnyEvent::Impl::Tk based on Tk, very bad choice.	625	AnyEvent::Impl::Tk based on Tk, very bad choice.
418	AnyEvent::Impl::Qt based on Qt, cannot be autoprobed (see its docs).	626	AnyEvent::Impl::Qt based on Qt, cannot be autoprobed (see its docs).
419	AnyEvent::Impl::EventLib based on Event::Lib, leaks memory and worse.	627	AnyEvent::Impl::EventLib based on Event::Lib, leaks memory and worse.
420	AnyEvent::Impl::POE based on POE, not generic enough for full support.	628	AnyEvent::Impl::POE based on POE, not generic enough for full support.
421		629
…		…
434	Returns C<$AnyEvent::MODEL>, forcing autodetection of the event model	642	Returns C<$AnyEvent::MODEL>, forcing autodetection of the event model
435	if necessary. You should only call this function right before you would	643	if necessary. You should only call this function right before you would
436	have created an AnyEvent watcher anyway, that is, as late as possible at	644	have created an AnyEvent watcher anyway, that is, as late as possible at
437	runtime.	645	runtime.
438		646
		647	=item $guard = AnyEvent::post_detect { BLOCK }
		648
		649	Arranges for the code block to be executed as soon as the event model is
		650	autodetected (or immediately if this has already happened).
		651
		652	If called in scalar or list context, then it creates and returns an object
		653	that automatically removes the callback again when it is destroyed. See
		654	L<Coro::BDB> for a case where this is useful.
		655
		656	=item @AnyEvent::post_detect
		657
		658	If there are any code references in this array (you can C<push> to it
		659	before or after loading AnyEvent), then they will called directly after
		660	the event loop has been chosen.
		661
		662	You should check C<$AnyEvent::MODEL> before adding to this array, though:
		663	if it contains a true value then the event loop has already been detected,
		664	and the array will be ignored.
		665
		666	Best use C<AnyEvent::post_detect { BLOCK }> instead.
		667
439	=back	668	=back
440		669
441	=head1 WHAT TO DO IN A MODULE	670	=head1 WHAT TO DO IN A MODULE
442		671
443	As a module author, you should C<use AnyEvent> and call AnyEvent methods	672	As a module author, you should C<use AnyEvent> and call AnyEvent methods
…		…
446	Be careful when you create watchers in the module body - AnyEvent will	675	Be careful when you create watchers in the module body - AnyEvent will
447	decide which event module to use as soon as the first method is called, so	676	decide which event module to use as soon as the first method is called, so
448	by calling AnyEvent in your module body you force the user of your module	677	by calling AnyEvent in your module body you force the user of your module
449	to load the event module first.	678	to load the event module first.
450		679
451	Never call C<< ->wait >> on a condition variable unless you I<know> that	680	Never call C<< ->recv >> on a condition variable unless you I<know> that
452	the C<< ->broadcast >> method has been called on it already. This is	681	the C<< ->send >> method has been called on it already. This is
453	because it will stall the whole program, and the whole point of using	682	because it will stall the whole program, and the whole point of using
454	events is to stay interactive.	683	events is to stay interactive.
455		684
456	It is fine, however, to call C<< ->wait >> when the user of your module	685	It is fine, however, to call C<< ->recv >> when the user of your module
457	requests it (i.e. if you create a http request object ad have a method	686	requests it (i.e. if you create a http request object ad have a method
458	called C<results> that returns the results, it should call C<< ->wait >>	687	called C<results> that returns the results, it should call C<< ->recv >>
459	freely, as the user of your module knows what she is doing. always).	688	freely, as the user of your module knows what she is doing. always).
460		689
461	=head1 WHAT TO DO IN THE MAIN PROGRAM	690	=head1 WHAT TO DO IN THE MAIN PROGRAM
462		691
463	There will always be a single main program - the only place that should	692	There will always be a single main program - the only place that should
…		…
465		694
466	If it doesn't care, it can just "use AnyEvent" and use it itself, or not	695	If it doesn't care, it can just "use AnyEvent" and use it itself, or not
467	do anything special (it does not need to be event-based) and let AnyEvent	696	do anything special (it does not need to be event-based) and let AnyEvent
468	decide which implementation to chose if some module relies on it.	697	decide which implementation to chose if some module relies on it.
469		698
470	If the main program relies on a specific event model. For example, in	699	If the main program relies on a specific event model - for example, in
471	Gtk2 programs you have to rely on the Glib module. You should load the	700	Gtk2 programs you have to rely on the Glib module - you should load the
472	event module before loading AnyEvent or any module that uses it: generally	701	event module before loading AnyEvent or any module that uses it: generally
473	speaking, you should load it as early as possible. The reason is that	702	speaking, you should load it as early as possible. The reason is that
474	modules might create watchers when they are loaded, and AnyEvent will	703	modules might create watchers when they are loaded, and AnyEvent will
475	decide on the event model to use as soon as it creates watchers, and it	704	decide on the event model to use as soon as it creates watchers, and it
476	might chose the wrong one unless you load the correct one yourself.	705	might chose the wrong one unless you load the correct one yourself.
477		706
478	You can chose to use a rather inefficient pure-perl implementation by	707	You can chose to use a pure-perl implementation by loading the
479	loading the C<AnyEvent::Impl::Perl> module, which gives you similar	708	C<AnyEvent::Impl::Perl> module, which gives you similar behaviour
480	behaviour everywhere, but letting AnyEvent chose is generally better.	709	everywhere, but letting AnyEvent chose the model is generally better.
		710
		711	=head2 MAINLOOP EMULATION
		712
		713	Sometimes (often for short test scripts, or even standalone programs who
		714	only want to use AnyEvent), you do not want to run a specific event loop.
		715
		716	In that case, you can use a condition variable like this:
		717
		718	AnyEvent->condvar->recv;
		719
		720	This has the effect of entering the event loop and looping forever.
		721
		722	Note that usually your program has some exit condition, in which case
		723	it is better to use the "traditional" approach of storing a condition
		724	variable somewhere, waiting for it, and sending it when the program should
		725	exit cleanly.
		726
		727
		728	=head1 OTHER MODULES
		729
		730	The following is a non-exhaustive list of additional modules that use
		731	AnyEvent and can therefore be mixed easily with other AnyEvent modules
		732	in the same program. Some of the modules come with AnyEvent, some are
		733	available via CPAN.
		734
		735	=over 4
		736
		737	=item L<AnyEvent::Util>
		738
		739	Contains various utility functions that replace often-used but blocking
		740	functions such as C<inet_aton> by event-/callback-based versions.
		741
		742	=item L<AnyEvent::Socket>
		743
		744	Provides various utility functions for (internet protocol) sockets,
		745	addresses and name resolution. Also functions to create non-blocking tcp
		746	connections or tcp servers, with IPv6 and SRV record support and more.
		747
		748	=item L<AnyEvent::Handle>
		749
		750	Provide read and write buffers, manages watchers for reads and writes,
		751	supports raw and formatted I/O, I/O queued and fully transparent and
		752	non-blocking SSL/TLS.
		753
		754	=item L<AnyEvent::DNS>
		755
		756	Provides rich asynchronous DNS resolver capabilities.
		757
		758	=item L<AnyEvent::HTTP>
		759
		760	A simple-to-use HTTP library that is capable of making a lot of concurrent
		761	HTTP requests.
		762
		763	=item L<AnyEvent::HTTPD>
		764
		765	Provides a simple web application server framework.
		766
		767	=item L<AnyEvent::FastPing>
		768
		769	The fastest ping in the west.
		770
		771	=item L<AnyEvent::DBI>
		772
		773	Executes L<DBI> requests asynchronously in a proxy process.
		774
		775	=item L<AnyEvent::AIO>
		776
		777	Truly asynchronous I/O, should be in the toolbox of every event
		778	programmer. AnyEvent::AIO transparently fuses L<IO::AIO> and AnyEvent
		779	together.
		780
		781	=item L<AnyEvent::BDB>
		782
		783	Truly asynchronous Berkeley DB access. AnyEvent::BDB transparently fuses
		784	L<BDB> and AnyEvent together.
		785
		786	=item L<AnyEvent::GPSD>
		787
		788	A non-blocking interface to gpsd, a daemon delivering GPS information.
		789
		790	=item L<AnyEvent::IGS>
		791
		792	A non-blocking interface to the Internet Go Server protocol (used by
		793	L<App::IGS>).
		794
		795	=item L<Net::IRC3>
		796
		797	AnyEvent based IRC client module family.
		798
		799	=item L<Net::XMPP2>
		800
		801	AnyEvent based XMPP (Jabber protocol) module family.
		802
		803	=item L<Net::FCP>
		804
		805	AnyEvent-based implementation of the Freenet Client Protocol, birthplace
		806	of AnyEvent.
		807
		808	=item L<Event::ExecFlow>
		809
		810	High level API for event-based execution flow control.
		811
		812	=item L<Coro>
		813
		814	Has special support for AnyEvent via L<Coro::AnyEvent>.
		815
		816	=item L<IO::Lambda>
		817
		818	The lambda approach to I/O - don't ask, look there. Can use AnyEvent.
		819
		820	=back
481		821
482	=cut	822	=cut
483		823
484	package AnyEvent;	824	package AnyEvent;
485		825
486	no warnings;	826	no warnings;
487	use strict;	827	use strict;
488		828
489	use Carp;	829	use Carp;
490		830
491	our $VERSION = '3.3';	831	our $VERSION = 4.2;
492	our $MODEL;	832	our $MODEL;
493		833
494	our $AUTOLOAD;	834	our $AUTOLOAD;
495	our @ISA;	835	our @ISA;
496		836
		837	our @REGISTRY;
		838
		839	our $WIN32;
		840
		841	BEGIN {
		842	my $win32 = ! ! ($^O =~ /mswin32/i);
		843	eval "sub WIN32(){ $win32 }";
		844	}
		845
497	our $verbose = $ENV{PERL_ANYEVENT_VERBOSE}*1;	846	our $verbose = $ENV{PERL_ANYEVENT_VERBOSE}*1;
498		847
499	our @REGISTRY;	848	our %PROTOCOL; # (ipv4\|ipv6) => (1\|2), higher numbers are preferred
		849
		850	{
		851	my $idx;
		852	$PROTOCOL{$_} = ++$idx
		853	for reverse split /\s,\s/,
		854	$ENV{PERL_ANYEVENT_PROTOCOLS} \|\| "ipv4,ipv6";
		855	}
500		856
501	my @models = (	857	my @models = (
502	[Coro::EV:: => AnyEvent::Impl::CoroEV::],
503	[Coro::Event:: => AnyEvent::Impl::CoroEvent::],
504	[EV:: => AnyEvent::Impl::EV::],	858	[EV:: => AnyEvent::Impl::EV::],
505	[Event:: => AnyEvent::Impl::Event::],	859	[Event:: => AnyEvent::Impl::Event::],
506	[Glib:: => AnyEvent::Impl::Glib::],
507	[Tk:: => AnyEvent::Impl::Tk::],
508	[Wx:: => AnyEvent::Impl::POE::],
509	[Prima:: => AnyEvent::Impl::POE::],
510	[AnyEvent::Impl::Perl:: => AnyEvent::Impl::Perl::],	860	[AnyEvent::Impl::Perl:: => AnyEvent::Impl::Perl::],
511	# everything below here will not be autoprobed as the pureperl backend should work everywhere	861	# everything below here will not be autoprobed
		862	# as the pureperl backend should work everywhere
		863	# and is usually faster
		864	[Tk:: => AnyEvent::Impl::Tk::], # crashes with many handles
		865	[Glib:: => AnyEvent::Impl::Glib::], # becomes extremely slow with many watchers
512	[Event::Lib:: => AnyEvent::Impl::EventLib::], # too buggy	866	[Event::Lib:: => AnyEvent::Impl::EventLib::], # too buggy
513	[Qt:: => AnyEvent::Impl::Qt::], # requires special main program	867	[Qt:: => AnyEvent::Impl::Qt::], # requires special main program
514	[POE::Kernel:: => AnyEvent::Impl::POE::], # lasciate ogni speranza	868	[POE::Kernel:: => AnyEvent::Impl::POE::], # lasciate ogni speranza
		869	[Wx:: => AnyEvent::Impl::POE::],
		870	[Prima:: => AnyEvent::Impl::POE::],
515	);	871	);
516		872
517	our %method = map +($_ => 1), qw(io timer signal child condvar broadcast wait one_event DESTROY);	873	our %method = map +($_ => 1), qw(io timer time now signal child condvar one_event DESTROY);
		874
		875	our @post_detect;
		876
		877	sub post_detect(&) {
		878	my ($cb) = @_;
		879
		880	if ($MODEL) {
		881	$cb->();
		882
		883	1
		884	} else {
		885	push @post_detect, $cb;
		886
		887	defined wantarray
		888	? bless \$cb, "AnyEvent::Util::PostDetect"
		889	: ()
		890	}
		891	}
		892
		893	sub AnyEvent::Util::PostDetect::DESTROY {
		894	@post_detect = grep $_ != ${$_[0]}, @post_detect;
		895	}
518		896
519	sub detect() {	897	sub detect() {
520	unless ($MODEL) {	898	unless ($MODEL) {
521	no strict 'refs';	899	no strict 'refs';
		900	local $SIG{__DIE__};
522		901
523	if ($ENV{PERL_ANYEVENT_MODEL} =~ /^([a-zA-Z]+)$/) {	902	if ($ENV{PERL_ANYEVENT_MODEL} =~ /^([a-zA-Z]+)$/) {
524	my $model = "AnyEvent::Impl::$1";	903	my $model = "AnyEvent::Impl::$1";
525	if (eval "require $model") {	904	if (eval "require $model") {
526	$MODEL = $model;	905	$MODEL = $model;
…		…
556	last;	935	last;
557	}	936	}
558	}	937	}
559		938
560	$MODEL	939	$MODEL
561	or die "No event module selected for AnyEvent and autodetect failed. Install any one of these modules: EV (or Coro+EV), Event (or Coro+Event) or Glib.";	940	or die "No event module selected for AnyEvent and autodetect failed. Install any one of these modules: EV, Event or Glib.";
562	}	941	}
563	}	942	}
564		943
		944	push @{"$MODEL\::ISA"}, "AnyEvent::Base";
		945
565	unshift @ISA, $MODEL;	946	unshift @ISA, $MODEL;
566	push @{"$MODEL\::ISA"}, "AnyEvent::Base";	947
		948	require AnyEvent::Strict if $ENV{PERL_ANYEVENT_STRICT};
		949
		950	(shift @post_detect)->() while @post_detect;
567	}	951	}
568		952
569	$MODEL	953	$MODEL
570	}	954	}
571		955
…		…
581	$class->$func (@_);	965	$class->$func (@_);
582	}	966	}
583		967
584	package AnyEvent::Base;	968	package AnyEvent::Base;
585		969
		970	# default implementation for now and time
		971
		972	use Time::HiRes ();
		973
		974	sub time { Time::HiRes::time }
		975	sub now { Time::HiRes::time }
		976
586	# default implementation for ->condvar, ->wait, ->broadcast	977	# default implementation for ->condvar
587		978
588	sub condvar {	979	sub condvar {
589	bless \my $flag, "AnyEvent::Base::CondVar"	980	bless { @_ == 3 ? (_ae_cb => $_[2]) : () }, AnyEvent::CondVar::
590	}
591
592	sub AnyEvent::Base::CondVar::broadcast {
593	${$_[0]}++;
594	}
595
596	sub AnyEvent::Base::CondVar::wait {
597	AnyEvent->one_event while !${$_[0]};
598	}	981	}
599		982
600	# default implementation for ->signal	983	# default implementation for ->signal
601		984
602	our %SIG_CB;	985	our %SIG_CB;
…		…
618	sub AnyEvent::Base::Signal::DESTROY {	1001	sub AnyEvent::Base::Signal::DESTROY {
619	my ($signal, $cb) = @{$_[0]};	1002	my ($signal, $cb) = @{$_[0]};
620		1003
621	delete $SIG_CB{$signal}{$cb};	1004	delete $SIG_CB{$signal}{$cb};
622		1005
623	$SIG{$signal} = 'DEFAULT' unless keys %{ $SIG_CB{$signal} };	1006	delete $SIG{$signal} unless keys %{ $SIG_CB{$signal} };
624	}	1007	}
625		1008
626	# default implementation for ->child	1009	# default implementation for ->child
627		1010
628	our %PID_CB;	1011	our %PID_CB;
…		…
655	or Carp::croak "required option 'pid' is missing";	1038	or Carp::croak "required option 'pid' is missing";
656		1039
657	$PID_CB{$pid}{$arg{cb}} = $arg{cb};	1040	$PID_CB{$pid}{$arg{cb}} = $arg{cb};
658		1041
659	unless ($WNOHANG) {	1042	unless ($WNOHANG) {
660	$WNOHANG = eval { require POSIX; &POSIX::WNOHANG } \|\| 1;	1043	$WNOHANG = eval { local $SIG{__DIE__}; require POSIX; &POSIX::WNOHANG } \|\| 1;
661	}	1044	}
662		1045
663	unless ($CHLD_W) {	1046	unless ($CHLD_W) {
664	$CHLD_W = AnyEvent->signal (signal => 'CHLD', cb => \&_sigchld);	1047	$CHLD_W = AnyEvent->signal (signal => 'CHLD', cb => \&_sigchld);
665	# child could be a zombie already, so make at least one round	1048	# child could be a zombie already, so make at least one round
…		…
675	delete $PID_CB{$pid}{$cb};	1058	delete $PID_CB{$pid}{$cb};
676	delete $PID_CB{$pid} unless keys %{ $PID_CB{$pid} };	1059	delete $PID_CB{$pid} unless keys %{ $PID_CB{$pid} };
677		1060
678	undef $CHLD_W unless keys %PID_CB;	1061	undef $CHLD_W unless keys %PID_CB;
679	}	1062	}
		1063
		1064	package AnyEvent::CondVar;
		1065
		1066	our @ISA = AnyEvent::CondVar::Base::;
		1067
		1068	package AnyEvent::CondVar::Base;
		1069
		1070	use overload
		1071	'&{}' => sub { my $self = shift; sub { $self->send (@_) } },
		1072	fallback => 1;
		1073
		1074	sub _send {
		1075	# nop
		1076	}
		1077
		1078	sub send {
		1079	my $cv = shift;
		1080	$cv->{_ae_sent} = [@_];
		1081	(delete $cv->{_ae_cb})->($cv) if $cv->{_ae_cb};
		1082	$cv->_send;
		1083	}
		1084
		1085	sub croak {
		1086	$_[0]{_ae_croak} = $_[1];
		1087	$_[0]->send;
		1088	}
		1089
		1090	sub ready {
		1091	$_[0]{_ae_sent}
		1092	}
		1093
		1094	sub _wait {
		1095	AnyEvent->one_event while !$_[0]{_ae_sent};
		1096	}
		1097
		1098	sub recv {
		1099	$_[0]->_wait;
		1100
		1101	Carp::croak $_[0]{_ae_croak} if $_[0]{_ae_croak};
		1102	wantarray ? @{ $_[0]{_ae_sent} } : $_[0]{_ae_sent}[0]
		1103	}
		1104
		1105	sub cb {
		1106	$_[0]{_ae_cb} = $_[1] if @_ > 1;
		1107	$_[0]{_ae_cb}
		1108	}
		1109
		1110	sub begin {
		1111	++$_[0]{_ae_counter};
		1112	$_[0]{_ae_end_cb} = $_[1] if @_ > 1;
		1113	}
		1114
		1115	sub end {
		1116	return if --$_[0]{_ae_counter};
		1117	&{ $_[0]{_ae_end_cb} \|\| sub { $_[0]->send } };
		1118	}
		1119
		1120	# undocumented/compatibility with pre-3.4
		1121	*broadcast = \&send;
		1122	*wait = \&_wait;
680		1123
681	=head1 SUPPLYING YOUR OWN EVENT MODEL INTERFACE	1124	=head1 SUPPLYING YOUR OWN EVENT MODEL INTERFACE
682		1125
683	This is an advanced topic that you do not normally need to use AnyEvent in	1126	This is an advanced topic that you do not normally need to use AnyEvent in
684	a module. This section is only of use to event loop authors who want to	1127	a module. This section is only of use to event loop authors who want to
…		…
738	C<PERL_ANYEVENT_MODEL>.	1181	C<PERL_ANYEVENT_MODEL>.
739		1182
740	When set to C<2> or higher, cause AnyEvent to report to STDERR which event	1183	When set to C<2> or higher, cause AnyEvent to report to STDERR which event
741	model it chooses.	1184	model it chooses.
742		1185
		1186	=item C<PERL_ANYEVENT_STRICT>
		1187
		1188	AnyEvent does not do much argument checking by default, as thorough
		1189	argument checking is very costly. Setting this variable to a true value
		1190	will cause AnyEvent to thoroughly check the arguments passed to most
		1191	method calls and croaks if it finds any problems. In other words, enables
		1192	"strict" mode. Unlike C<use strict> it is definitely recommended ot keep
		1193	it off in production.
		1194
743	=item C<PERL_ANYEVENT_MODEL>	1195	=item C<PERL_ANYEVENT_MODEL>
744		1196
745	This can be used to specify the event model to be used by AnyEvent, before	1197	This can be used to specify the event model to be used by AnyEvent, before
746	autodetection and -probing kicks in. It must be a string consisting	1198	auto detection and -probing kicks in. It must be a string consisting
747	entirely of ASCII letters. The string C<AnyEvent::Impl::> gets prepended	1199	entirely of ASCII letters. The string C<AnyEvent::Impl::> gets prepended
748	and the resulting module name is loaded and if the load was successful,	1200	and the resulting module name is loaded and if the load was successful,
749	used as event model. If it fails to load AnyEvent will proceed with	1201	used as event model. If it fails to load AnyEvent will proceed with
750	autodetection and -probing.	1202	auto detection and -probing.
751		1203
752	This functionality might change in future versions.	1204	This functionality might change in future versions.
753		1205
754	For example, to force the pure perl model (L<AnyEvent::Impl::Perl>) you	1206	For example, to force the pure perl model (L<AnyEvent::Impl::Perl>) you
755	could start your program like this:	1207	could start your program like this:
756		1208
757	PERL_ANYEVENT_MODEL=Perl perl ...	1209	PERL_ANYEVENT_MODEL=Perl perl ...
		1210
		1211	=item C<PERL_ANYEVENT_PROTOCOLS>
		1212
		1213	Used by both L<AnyEvent::DNS> and L<AnyEvent::Socket> to determine preferences
		1214	for IPv4 or IPv6. The default is unspecified (and might change, or be the result
		1215	of auto probing).
		1216
		1217	Must be set to a comma-separated list of protocols or address families,
		1218	current supported: C<ipv4> and C<ipv6>. Only protocols mentioned will be
		1219	used, and preference will be given to protocols mentioned earlier in the
		1220	list.
		1221
		1222	This variable can effectively be used for denial-of-service attacks
		1223	against local programs (e.g. when setuid), although the impact is likely
		1224	small, as the program has to handle connection errors already-
		1225
		1226	Examples: C<PERL_ANYEVENT_PROTOCOLS=ipv4,ipv6> - prefer IPv4 over IPv6,
		1227	but support both and try to use both. C<PERL_ANYEVENT_PROTOCOLS=ipv4>
		1228	- only support IPv4, never try to resolve or contact IPv6
		1229	addresses. C<PERL_ANYEVENT_PROTOCOLS=ipv6,ipv4> support either IPv4 or
		1230	IPv6, but prefer IPv6 over IPv4.
		1231
		1232	=item C<PERL_ANYEVENT_EDNS0>
		1233
		1234	Used by L<AnyEvent::DNS> to decide whether to use the EDNS0 extension
		1235	for DNS. This extension is generally useful to reduce DNS traffic, but
		1236	some (broken) firewalls drop such DNS packets, which is why it is off by
		1237	default.
		1238
		1239	Setting this variable to C<1> will cause L<AnyEvent::DNS> to announce
		1240	EDNS0 in its DNS requests.
		1241
		1242	=item C<PERL_ANYEVENT_MAX_FORKS>
		1243
		1244	The maximum number of child processes that C<AnyEvent::Util::fork_call>
		1245	will create in parallel.
758		1246
759	=back	1247	=back
760		1248
761	=head1 EXAMPLE PROGRAM	1249	=head1 EXAMPLE PROGRAM
762		1250
…		…
773	poll => 'r',	1261	poll => 'r',
774	cb => sub {	1262	cb => sub {
775	warn "io event <$_[0]>\n"; # will always output <r>	1263	warn "io event <$_[0]>\n"; # will always output <r>
776	chomp (my $input = <STDIN>); # read a line	1264	chomp (my $input = <STDIN>); # read a line
777	warn "read: $input\n"; # output what has been read	1265	warn "read: $input\n"; # output what has been read
778	$cv->broadcast if $input =~ /^q/i; # quit program if /^q/i	1266	$cv->send if $input =~ /^q/i; # quit program if /^q/i
779	},	1267	},
780	);	1268	);
781		1269
782	my $time_watcher; # can only be used once	1270	my $time_watcher; # can only be used once
783		1271
…		…
788	});	1276	});
789	}	1277	}
790		1278
791	new_timer; # create first timer	1279	new_timer; # create first timer
792		1280
793	$cv->wait; # wait until user enters /^q/i	1281	$cv->recv; # wait until user enters /^q/i
794		1282
795	=head1 REAL-WORLD EXAMPLE	1283	=head1 REAL-WORLD EXAMPLE
796		1284
797	Consider the L<Net::FCP> module. It features (among others) the following	1285	Consider the L<Net::FCP> module. It features (among others) the following
798	API calls, which are to freenet what HTTP GET requests are to http:	1286	API calls, which are to freenet what HTTP GET requests are to http:
…		…
848	syswrite $txn->{fh}, $txn->{request}	1336	syswrite $txn->{fh}, $txn->{request}
849	or die "connection or write error";	1337	or die "connection or write error";
850	$txn->{w} = AnyEvent->io (fh => $txn->{fh}, poll => 'r', cb => sub { $txn->fh_ready_r });	1338	$txn->{w} = AnyEvent->io (fh => $txn->{fh}, poll => 'r', cb => sub { $txn->fh_ready_r });
851		1339
852	Again, C<fh_ready_r> waits till all data has arrived, and then stores the	1340	Again, C<fh_ready_r> waits till all data has arrived, and then stores the
853	result and signals any possible waiters that the request ahs finished:	1341	result and signals any possible waiters that the request has finished:
854		1342
855	sysread $txn->{fh}, $txn->{buf}, length $txn->{$buf};	1343	sysread $txn->{fh}, $txn->{buf}, length $txn->{$buf};
856		1344
857	if (end-of-file or data complete) {	1345	if (end-of-file or data complete) {
858	$txn->{result} = $txn->{buf};	1346	$txn->{result} = $txn->{buf};
859	$txn->{finished}->broadcast;	1347	$txn->{finished}->send;
860	$txb->{cb}->($txn) of $txn->{cb}; # also call callback	1348	$txb->{cb}->($txn) of $txn->{cb}; # also call callback
861	}	1349	}
862		1350
863	The C<result> method, finally, just waits for the finished signal (if the	1351	The C<result> method, finally, just waits for the finished signal (if the
864	request was already finished, it doesn't wait, of course, and returns the	1352	request was already finished, it doesn't wait, of course, and returns the
865	data:	1353	data:
866		1354
867	$txn->{finished}->wait;	1355	$txn->{finished}->recv;
868	return $txn->{result};	1356	return $txn->{result};
869		1357
870	The actual code goes further and collects all errors (C<die>s, exceptions)	1358	The actual code goes further and collects all errors (C<die>s, exceptions)
871	that occured during request processing. The C<result> method detects	1359	that occurred during request processing. The C<result> method detects
872	whether an exception as thrown (it is stored inside the $txn object)	1360	whether an exception as thrown (it is stored inside the $txn object)
873	and just throws the exception, which means connection errors and other	1361	and just throws the exception, which means connection errors and other
874	problems get reported tot he code that tries to use the result, not in a	1362	problems get reported tot he code that tries to use the result, not in a
875	random callback.	1363	random callback.
876		1364
…		…
907		1395
908	my $quit = AnyEvent->condvar;	1396	my $quit = AnyEvent->condvar;
909		1397
910	$fcp->txn_client_get ($url)->cb (sub {	1398	$fcp->txn_client_get ($url)->cb (sub {
911	...	1399	...
912	$quit->broadcast;	1400	$quit->send;
913	});	1401	});
914		1402
915	$quit->wait;	1403	$quit->recv;
916		1404
917		1405
918	=head1 BENCHMARKS	1406	=head1 BENCHMARKS
919		1407
920	To give you an idea of the performance and overheads that AnyEvent adds	1408	To give you an idea of the performance and overheads that AnyEvent adds
…		…
922	of various event loops I prepared some benchmarks.	1410	of various event loops I prepared some benchmarks.
923		1411
924	=head2 BENCHMARKING ANYEVENT OVERHEAD	1412	=head2 BENCHMARKING ANYEVENT OVERHEAD
925		1413
926	Here is a benchmark of various supported event models used natively and	1414	Here is a benchmark of various supported event models used natively and
927	through anyevent. The benchmark creates a lot of timers (with a zero	1415	through AnyEvent. The benchmark creates a lot of timers (with a zero
928	timeout) and I/O watchers (watching STDOUT, a pty, to become writable,	1416	timeout) and I/O watchers (watching STDOUT, a pty, to become writable,
929	which it is), lets them fire exactly once and destroys them again.	1417	which it is), lets them fire exactly once and destroys them again.
930		1418
931	Source code for this benchmark is found as F<eg/bench> in the AnyEvent	1419	Source code for this benchmark is found as F<eg/bench> in the AnyEvent
932	distribution.	1420	distribution.
…		…
949	all watchers, to avoid adding memory overhead. That means closure creation	1437	all watchers, to avoid adding memory overhead. That means closure creation
950	and memory usage is not included in the figures.	1438	and memory usage is not included in the figures.
951		1439
952	I<invoke> is the time, in microseconds, used to invoke a simple	1440	I<invoke> is the time, in microseconds, used to invoke a simple
953	callback. The callback simply counts down a Perl variable and after it was	1441	callback. The callback simply counts down a Perl variable and after it was
954	invoked "watcher" times, it would C<< ->broadcast >> a condvar once to	1442	invoked "watcher" times, it would C<< ->send >> a condvar once to
955	signal the end of this phase.	1443	signal the end of this phase.
956		1444
957	I<destroy> is the time, in microseconds, that it takes to destroy a single	1445	I<destroy> is the time, in microseconds, that it takes to destroy a single
958	watcher.	1446	watcher.
959		1447
…		…
1019	file descriptor is dup()ed for each watcher. This shows that the dup()	1507	file descriptor is dup()ed for each watcher. This shows that the dup()
1020	employed by some adaptors is not a big performance issue (it does incur a	1508	employed by some adaptors is not a big performance issue (it does incur a
1021	hidden memory cost inside the kernel which is not reflected in the figures	1509	hidden memory cost inside the kernel which is not reflected in the figures
1022	above).	1510	above).
1023		1511
1024	C<POE>, regardless of underlying event loop (whether using its pure	1512	C<POE>, regardless of underlying event loop (whether using its pure perl
1025	perl select-based backend or the Event module, the POE-EV backend	1513	select-based backend or the Event module, the POE-EV backend couldn't
1026	couldn't be tested because it wasn't working) shows abysmal performance	1514	be tested because it wasn't working) shows abysmal performance and
1027	and memory usage: Watchers use almost 30 times as much memory as	1515	memory usage with AnyEvent: Watchers use almost 30 times as much memory
1028	EV watchers, and 10 times as much memory as Event (the high memory	1516	as EV watchers, and 10 times as much memory as Event (the high memory
1029	requirements are caused by requiring a session for each watcher). Watcher	1517	requirements are caused by requiring a session for each watcher). Watcher
1030	invocation speed is almost 900 times slower than with AnyEvent's pure perl	1518	invocation speed is almost 900 times slower than with AnyEvent's pure perl
		1519	implementation.
		1520
1031	implementation. The design of the POE adaptor class in AnyEvent can not	1521	The design of the POE adaptor class in AnyEvent can not really account
1032	really account for this, as session creation overhead is small compared	1522	for the performance issues, though, as session creation overhead is
1033	to execution of the state machine, which is coded pretty optimally within	1523	small compared to execution of the state machine, which is coded pretty
1034	L<AnyEvent::Impl::POE>. POE simply seems to be abysmally slow.	1524	optimally within L<AnyEvent::Impl::POE> (and while everybody agrees that
		1525	using multiple sessions is not a good approach, especially regarding
		1526	memory usage, even the author of POE could not come up with a faster
		1527	design).
1035		1528
1036	=head3 Summary	1529	=head3 Summary
1037		1530
1038	=over 4	1531	=over 4
1039		1532
…		…
1050		1543
1051	=back	1544	=back
1052		1545
1053	=head2 BENCHMARKING THE LARGE SERVER CASE	1546	=head2 BENCHMARKING THE LARGE SERVER CASE
1054		1547
1055	This benchmark atcually benchmarks the event loop itself. It works by	1548	This benchmark actually benchmarks the event loop itself. It works by
1056	creating a number of "servers": each server consists of a socketpair, a	1549	creating a number of "servers": each server consists of a socket pair, a
1057	timeout watcher that gets reset on activity (but never fires), and an I/O	1550	timeout watcher that gets reset on activity (but never fires), and an I/O
1058	watcher waiting for input on one side of the socket. Each time the socket	1551	watcher waiting for input on one side of the socket. Each time the socket
1059	watcher reads a byte it will write that byte to a random other "server".	1552	watcher reads a byte it will write that byte to a random other "server".
1060		1553
1061	The effect is that there will be a lot of I/O watchers, only part of which	1554	The effect is that there will be a lot of I/O watchers, only part of which
1062	are active at any one point (so there is a constant number of active	1555	are active at any one point (so there is a constant number of active
1063	fds for each loop iterstaion, but which fds these are is random). The	1556	fds for each loop iteration, but which fds these are is random). The
1064	timeout is reset each time something is read because that reflects how	1557	timeout is reset each time something is read because that reflects how
1065	most timeouts work (and puts extra pressure on the event loops).	1558	most timeouts work (and puts extra pressure on the event loops).
1066		1559
1067	In this benchmark, we use 10000 socketpairs (20000 sockets), of which 100	1560	In this benchmark, we use 10000 socket pairs (20000 sockets), of which 100
1068	(1%) are active. This mirrors the activity of large servers with many	1561	(1%) are active. This mirrors the activity of large servers with many
1069	connections, most of which are idle at any one point in time.	1562	connections, most of which are idle at any one point in time.
1070		1563
1071	Source code for this benchmark is found as F<eg/bench2> in the AnyEvent	1564	Source code for this benchmark is found as F<eg/bench2> in the AnyEvent
1072	distribution.	1565	distribution.
…		…
1074	=head3 Explanation of the columns	1567	=head3 Explanation of the columns
1075		1568
1076	I<sockets> is the number of sockets, and twice the number of "servers" (as	1569	I<sockets> is the number of sockets, and twice the number of "servers" (as
1077	each server has a read and write socket end).	1570	each server has a read and write socket end).
1078		1571
1079	I<create> is the time it takes to create a socketpair (which is	1572	I<create> is the time it takes to create a socket pair (which is
1080	nontrivial) and two watchers: an I/O watcher and a timeout watcher.	1573	nontrivial) and two watchers: an I/O watcher and a timeout watcher.
1081		1574
1082	I<request>, the most important value, is the time it takes to handle a	1575	I<request>, the most important value, is the time it takes to handle a
1083	single "request", that is, reading the token from the pipe and forwarding	1576	single "request", that is, reading the token from the pipe and forwarding
1084	it to another server. This includes deleting the old timeout and creating	1577	it to another server. This includes deleting the old timeout and creating
…		…
1086		1579
1087	=head3 Results	1580	=head3 Results
1088		1581
1089	name sockets create request	1582	name sockets create request
1090	EV 20000 69.01 11.16	1583	EV 20000 69.01 11.16
1091	Perl 20000 75.28 112.76	1584	Perl 20000 73.32 35.87
1092	Event 20000 212.62 257.32	1585	Event 20000 212.62 257.32
1093	Glib 20000 651.16 1896.30	1586	Glib 20000 651.16 1896.30
1094	POE 20000 349.67 12317.24 uses POE::Loop::Event	1587	POE 20000 349.67 12317.24 uses POE::Loop::Event
1095		1588
1096	=head3 Discussion	1589	=head3 Discussion
…		…
1118		1611
1119	=head3 Summary	1612	=head3 Summary
1120		1613
1121	=over 4	1614	=over 4
1122		1615
1123	=item * The pure perl implementation performs extremely well, considering	1616	=item * The pure perl implementation performs extremely well.
1124	that it uses select.
1125		1617
1126	=item * Avoid Glib or POE in large projects where performance matters.	1618	=item * Avoid Glib or POE in large projects where performance matters.
1127		1619
1128	=back	1620	=back
1129		1621
…		…
1142		1634
1143	=head3 Results	1635	=head3 Results
1144		1636
1145	name sockets create request	1637	name sockets create request
1146	EV 16 20.00 6.54	1638	EV 16 20.00 6.54
		1639	Perl 16 25.75 12.62
1147	Event 16 81.27 35.86	1640	Event 16 81.27 35.86
1148	Glib 16 32.63 15.48	1641	Glib 16 32.63 15.48
1149	Perl 16 24.62 162.37
1150	POE 16 261.87 276.28 uses POE::Loop::Event	1642	POE 16 261.87 276.28 uses POE::Loop::Event
1151		1643
1152	=head3 Discussion	1644	=head3 Discussion
1153		1645
1154	The benchmark tries to test the performance of a typical small	1646	The benchmark tries to test the performance of a typical small
…		…
1158	speed most when you have lots of watchers, not when you only have a few of	1650	speed most when you have lots of watchers, not when you only have a few of
1159	them).	1651	them).
1160		1652
1161	EV is again fastest.	1653	EV is again fastest.
1162		1654
1163	The C-based event loops Event and Glib come in second this time, as the	1655	Perl again comes second. It is noticeably faster than the C-based event
1164	overhead of running an iteration is much smaller in C than in Perl (little	1656	loops Event and Glib, although the difference is too small to really
1165	code to execute in the inner loop, and perl's function calling overhead is	1657	matter.
1166	high, and updating all the data structures is costly).
1167
1168	The pure perl event loop is much slower, but still competitive.
1169		1658
1170	POE also performs much better in this case, but is is still far behind the	1659	POE also performs much better in this case, but is is still far behind the
1171	others.	1660	others.
1172		1661
1173	=head3 Summary	1662	=head3 Summary
…		…
1181		1670
1182		1671
1183	=head1 FORK	1672	=head1 FORK
1184		1673
1185	Most event libraries are not fork-safe. The ones who are usually are	1674	Most event libraries are not fork-safe. The ones who are usually are
1186	because they are so inefficient. Only L<EV> is fully fork-aware.	1675	because they rely on inefficient but fork-safe C<select> or C<poll>
		1676	calls. Only L<EV> is fully fork-aware.
1187		1677
1188	If you have to fork, you must either do so I<before> creating your first	1678	If you have to fork, you must either do so I<before> creating your first
1189	watcher OR you must not use AnyEvent at all in the child.	1679	watcher OR you must not use AnyEvent at all in the child.
1190		1680
1191		1681
…		…
1199	specified in the variable.	1689	specified in the variable.
1200		1690
1201	You can make AnyEvent completely ignore this variable by deleting it	1691	You can make AnyEvent completely ignore this variable by deleting it
1202	before the first watcher gets created, e.g. with a C<BEGIN> block:	1692	before the first watcher gets created, e.g. with a C<BEGIN> block:
1203		1693
1204	BEGIN { delete $ENV{PERL_ANYEVENT_MODEL} }	1694	BEGIN { delete $ENV{PERL_ANYEVENT_MODEL} }
1205		1695
1206	use AnyEvent;	1696	use AnyEvent;
		1697
		1698	Similar considerations apply to $ENV{PERL_ANYEVENT_VERBOSE}, as that can
		1699	be used to probe what backend is used and gain other information (which is
		1700	probably even less useful to an attacker than PERL_ANYEVENT_MODEL), and
		1701	$ENV{PERL_ANYEGENT_STRICT}.
		1702
		1703
		1704	=head1 BUGS
		1705
		1706	Perl 5.8 has numerous memleaks that sometimes hit this module and are hard
		1707	to work around. If you suffer from memleaks, first upgrade to Perl 5.10
		1708	and check wether the leaks still show up. (Perl 5.10.0 has other annoying
		1709	mamleaks, such as leaking on C<map> and C<grep> but it is usually not as
		1710	pronounced).
1207		1711
1208		1712
1209	=head1 SEE ALSO	1713	=head1 SEE ALSO
1210		1714
1211	Event modules: L<Coro::EV>, L<EV>, L<EV::Glib>, L<Glib::EV>,	1715	Utility functions: L<AnyEvent::Util>.
1212	L<Coro::Event>, L<Event>, L<Glib::Event>, L<Glib>, L<Coro>, L<Tk>,	1716
		1717	Event modules: L<EV>, L<EV::Glib>, L<Glib::EV>, L<Event>, L<Glib::Event>,
1213	L<Event::Lib>, L<Qt>, L<POE>.	1718	L<Glib>, L<Tk>, L<Event::Lib>, L<Qt>, L<POE>.
1214		1719
1215	Implementations: L<AnyEvent::Impl::CoroEV>, L<AnyEvent::Impl::EV>,	1720	Implementations: L<AnyEvent::Impl::EV>, L<AnyEvent::Impl::Event>,
1216	L<AnyEvent::Impl::CoroEvent>, L<AnyEvent::Impl::Event>, L<AnyEvent::Impl::Glib>,	1721	L<AnyEvent::Impl::Glib>, L<AnyEvent::Impl::Tk>, L<AnyEvent::Impl::Perl>,
1217	L<AnyEvent::Impl::Tk>, L<AnyEvent::Impl::Perl>, L<AnyEvent::Impl::EventLib>,	1722	L<AnyEvent::Impl::EventLib>, L<AnyEvent::Impl::Qt>,
1218	L<AnyEvent::Impl::Qt>, L<AnyEvent::Impl::POE>.	1723	L<AnyEvent::Impl::POE>.
1219		1724
		1725	Non-blocking file handles, sockets, TCP clients and
		1726	servers: L<AnyEvent::Handle>, L<AnyEvent::Socket>.
		1727
		1728	Asynchronous DNS: L<AnyEvent::DNS>.
		1729
		1730	Coroutine support: L<Coro>, L<Coro::AnyEvent>, L<Coro::EV>, L<Coro::Event>,
		1731
1220	Nontrivial usage examples: L<Net::FCP>, L<Net::XMPP2>.	1732	Nontrivial usage examples: L<Net::FCP>, L<Net::XMPP2>, L<AnyEvent::DNS>.
1221		1733
1222		1734
1223	=head1 AUTHOR	1735	=head1 AUTHOR
1224		1736
1225	Marc Lehmann <schmorp@schmorp.de>	1737	Marc Lehmann <schmorp@schmorp.de>
1226	http://home.schmorp.de/	1738	http://home.schmorp.de/
1227		1739
1228	=cut	1740	=cut
1229		1741
1230	1	1742	1
1231		1743

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent.pm (file contents): Revision 1.98 by root, Sun Apr 27 16:31:48 2008 UTC vs. Revision 1.168 by root, Tue Jul 8 23:53:37 2008 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent.pm (file contents):
Revision 1.98 by root, Sun Apr 27 16:31:48 2008 UTC vs.
Revision 1.168 by root, Tue Jul 8 23:53:37 2008 UTC