[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent.pm

Comparing AnyEvent/lib/AnyEvent.pm (file contents):
Revision 1.142 by root, Tue May 27 02:34:30 2008 UTC vs.
Revision 1.180 by root, Sat Sep 6 07:00:45 2008 UTC

…		…
1	=head1 => NAME	1	=head1 NAME
2		2
3	AnyEvent - provide framework for multiple event loops	3	AnyEvent - provide framework for multiple event loops
4		4
5	EV, Event, Glib, Tk, Perl, Event::Lib, Qt, POE - various supported event loops	5	EV, Event, Glib, Tk, Perl, Event::Lib, Qt, POE - various supported event loops
6		6
7	=head1 SYNOPSIS	7	=head1 SYNOPSIS
8		8
9	use AnyEvent;	9	use AnyEvent;
10		10
11	my $w = AnyEvent->io (fh => $fh, poll => "r\|w", cb => sub {	11	my $w = AnyEvent->io (fh => $fh, poll => "r\|w", cb => sub { ... });
12	...
13	});
14		12
15	my $w = AnyEvent->timer (after => $seconds, cb => sub {	13	my $w = AnyEvent->timer (after => $seconds, cb => sub { ... });
		14	my $w = AnyEvent->timer (after => $seconds, interval => $seconds, cb => ...
		15
		16	print AnyEvent->now; # prints current event loop time
		17	print AnyEvent->time; # think Time::HiRes::time or simply CORE::time.
		18
		19	my $w = AnyEvent->signal (signal => "TERM", cb => sub { ... });
		20
		21	my $w = AnyEvent->child (pid => $pid, cb => sub {
		22	my ($pid, $status) = @_;
16	...	23	...
17	});	24	});
18		25
19	my $w = AnyEvent->condvar; # stores whether a condition was flagged	26	my $w = AnyEvent->condvar; # stores whether a condition was flagged
20	$w->send; # wake up current and all future recv's	27	$w->send; # wake up current and all future recv's
21	$w->recv; # enters "main loop" till $condvar gets ->send	28	$w->recv; # enters "main loop" till $condvar gets ->send
		29	# use a condvar in callback mode:
		30	$w->cb (sub { $_[0]->recv });
		31
		32	=head1 INTRODUCTION/TUTORIAL
		33
		34	This manpage is mainly a reference manual. If you are interested
		35	in a tutorial or some gentle introduction, have a look at the
		36	L<AnyEvent::Intro> manpage.
22		37
23	=head1 WHY YOU SHOULD USE THIS MODULE (OR NOT)	38	=head1 WHY YOU SHOULD USE THIS MODULE (OR NOT)
24		39
25	Glib, POE, IO::Async, Event... CPAN offers event models by the dozen	40	Glib, POE, IO::Async, Event... CPAN offers event models by the dozen
26	nowadays. So what is different about AnyEvent?	41	nowadays. So what is different about AnyEvent?
27		42
28	Executive Summary: AnyEvent is I<compatible>, AnyEvent is I<free of	43	Executive Summary: AnyEvent is I<compatible>, AnyEvent is I<free of
29	policy> and AnyEvent is I<small and efficient>.	44	policy> and AnyEvent is I<small and efficient>.
30		45
31	First and foremost, I<AnyEvent is not an event model> itself, it only	46	First and foremost, I<AnyEvent is not an event model> itself, it only
32	interfaces to whatever event model the main program happens to use in a	47	interfaces to whatever event model the main program happens to use, in a
33	pragmatic way. For event models and certain classes of immortals alike,	48	pragmatic way. For event models and certain classes of immortals alike,
34	the statement "there can only be one" is a bitter reality: In general,	49	the statement "there can only be one" is a bitter reality: In general,
35	only one event loop can be active at the same time in a process. AnyEvent	50	only one event loop can be active at the same time in a process. AnyEvent
36	helps hiding the differences between those event loops.	51	cannot change this, but it can hide the differences between those event
		52	loops.
37		53
38	The goal of AnyEvent is to offer module authors the ability to do event	54	The goal of AnyEvent is to offer module authors the ability to do event
39	programming (waiting for I/O or timer events) without subscribing to a	55	programming (waiting for I/O or timer events) without subscribing to a
40	religion, a way of living, and most importantly: without forcing your	56	religion, a way of living, and most importantly: without forcing your
41	module users into the same thing by forcing them to use the same event	57	module users into the same thing by forcing them to use the same event
42	model you use.	58	model you use.
43		59
44	For modules like POE or IO::Async (which is a total misnomer as it is	60	For modules like POE or IO::Async (which is a total misnomer as it is
45	actually doing all I/O I<synchronously>...), using them in your module is	61	actually doing all I/O I<synchronously>...), using them in your module is
46	like joining a cult: After you joined, you are dependent on them and you	62	like joining a cult: After you joined, you are dependent on them and you
47	cannot use anything else, as it is simply incompatible to everything that	63	cannot use anything else, as they are simply incompatible to everything
48	isn't itself. What's worse, all the potential users of your module are	64	that isn't them. What's worse, all the potential users of your
49	I<also> forced to use the same event loop you use.	65	module are I<also> forced to use the same event loop you use.
50		66
51	AnyEvent is different: AnyEvent + POE works fine. AnyEvent + Glib works	67	AnyEvent is different: AnyEvent + POE works fine. AnyEvent + Glib works
52	fine. AnyEvent + Tk works fine etc. etc. but none of these work together	68	fine. AnyEvent + Tk works fine etc. etc. but none of these work together
53	with the rest: POE + IO::Async? No go. Tk + Event? No go. Again: if	69	with the rest: POE + IO::Async? No go. Tk + Event? No go. Again: if
54	your module uses one of those, every user of your module has to use it,	70	your module uses one of those, every user of your module has to use it,
55	too. But if your module uses AnyEvent, it works transparently with all	71	too. But if your module uses AnyEvent, it works transparently with all
56	event models it supports (including stuff like POE and IO::Async, as long	72	event models it supports (including stuff like IO::Async, as long as those
57	as those use one of the supported event loops. It is trivial to add new	73	use one of the supported event loops. It is trivial to add new event loops
58	event loops to AnyEvent, too, so it is future-proof).	74	to AnyEvent, too, so it is future-proof).
59		75
60	In addition to being free of having to use I<the one and only true event	76	In addition to being free of having to use I<the one and only true event
61	model>, AnyEvent also is free of bloat and policy: with POE or similar	77	model>, AnyEvent also is free of bloat and policy: with POE or similar
62	modules, you get an enormous amount of code and strict rules you have to	78	modules, you get an enormous amount of code and strict rules you have to
63	follow. AnyEvent, on the other hand, is lean and up to the point, by only	79	follow. AnyEvent, on the other hand, is lean and up to the point, by only
132	Many watchers either are used with "recursion" (repeating timers for	148	Many watchers either are used with "recursion" (repeating timers for
133	example), or need to refer to their watcher object in other ways.	149	example), or need to refer to their watcher object in other ways.
134		150
135	An any way to achieve that is this pattern:	151	An any way to achieve that is this pattern:
136		152
137	my $w; $w = AnyEvent->type (arg => value ..., cb => sub {	153	my $w; $w = AnyEvent->type (arg => value ..., cb => sub {
138	# you can use $w here, for example to undef it	154	# you can use $w here, for example to undef it
139	undef $w;	155	undef $w;
140	});	156	});
141		157
142	Note that C<my $w; $w => combination. This is necessary because in Perl,	158	Note that C<my $w; $w => combination. This is necessary because in Perl,
143	my variables are only visible after the statement in which they are	159	my variables are only visible after the statement in which they are
144	declared.	160	declared.
145		161
146	=head2 I/O WATCHERS	162	=head2 I/O WATCHERS
147		163
148	You can create an I/O watcher by calling the C<< AnyEvent->io >> method	164	You can create an I/O watcher by calling the C<< AnyEvent->io >> method
149	with the following mandatory key-value pairs as arguments:	165	with the following mandatory key-value pairs as arguments:
150		166
151	C<fh> the Perl I<file handle> (I<not> file descriptor) to watch	167	C<fh> the Perl I<file handle> (I<not> file descriptor) to watch for events
152	for events. C<poll> must be a string that is either C<r> or C<w>,	168	(AnyEvent might or might not keep a reference to this file handle). C<poll>
153	which creates a watcher waiting for "r"eadable or "w"ritable events,	169	must be a string that is either C<r> or C<w>, which creates a watcher
154	respectively. C<cb> is the callback to invoke each time the file handle	170	waiting for "r"eadable or "w"ritable events, respectively. C<cb> is the
155	becomes ready.	171	callback to invoke each time the file handle becomes ready.
156		172
157	Although the callback might get passed parameters, their value and	173	Although the callback might get passed parameters, their value and
158	presence is undefined and you cannot rely on them. Portable AnyEvent	174	presence is undefined and you cannot rely on them. Portable AnyEvent
159	callbacks cannot use arguments passed to I/O watcher callbacks.	175	callbacks cannot use arguments passed to I/O watcher callbacks.
160		176
…		…
164		180
165	Some event loops issue spurious readyness notifications, so you should	181	Some event loops issue spurious readyness notifications, so you should
166	always use non-blocking calls when reading/writing from/to your file	182	always use non-blocking calls when reading/writing from/to your file
167	handles.	183	handles.
168		184
169	Example:
170
171	# wait for readability of STDIN, then read a line and disable the watcher	185	Example: wait for readability of STDIN, then read a line and disable the
		186	watcher.
		187
172	my $w; $w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {	188	my $w; $w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {
173	chomp (my $input = <STDIN>);	189	chomp (my $input = <STDIN>);
174	warn "read: $input\n";	190	warn "read: $input\n";
175	undef $w;	191	undef $w;
176	});	192	});
…		…
186		202
187	Although the callback might get passed parameters, their value and	203	Although the callback might get passed parameters, their value and
188	presence is undefined and you cannot rely on them. Portable AnyEvent	204	presence is undefined and you cannot rely on them. Portable AnyEvent
189	callbacks cannot use arguments passed to time watcher callbacks.	205	callbacks cannot use arguments passed to time watcher callbacks.
190		206
191	The timer callback will be invoked at most once: if you want a repeating	207	The callback will normally be invoked once only. If you specify another
192	timer you have to create a new watcher (this is a limitation by both Tk	208	parameter, C<interval>, as a strictly positive number (> 0), then the
193	and Glib).	209	callback will be invoked regularly at that interval (in fractional
		210	seconds) after the first invocation. If C<interval> is specified with a
		211	false value, then it is treated as if it were missing.
194		212
195	Example:	213	The callback will be rescheduled before invoking the callback, but no
		214	attempt is done to avoid timer drift in most backends, so the interval is
		215	only approximate.
196		216
197	# fire an event after 7.7 seconds	217	Example: fire an event after 7.7 seconds.
		218
198	my $w = AnyEvent->timer (after => 7.7, cb => sub {	219	my $w = AnyEvent->timer (after => 7.7, cb => sub {
199	warn "timeout\n";	220	warn "timeout\n";
200	});	221	});
201		222
202	# to cancel the timer:	223	# to cancel the timer:
203	undef $w;	224	undef $w;
204		225
205	Example 2:
206
207	# fire an event after 0.5 seconds, then roughly every second	226	Example 2: fire an event after 0.5 seconds, then roughly every second.
208	my $w;
209		227
210	my $cb = sub {
211	# cancel the old timer while creating a new one
212	$w = AnyEvent->timer (after => 1, cb => $cb);	228	my $w = AnyEvent->timer (after => 0.5, interval => 1, cb => sub {
		229	warn "timeout\n";
213	};	230	};
214
215	# start the "loop" by creating the first watcher
216	$w = AnyEvent->timer (after => 0.5, cb => $cb);
217		231
218	=head3 TIMING ISSUES	232	=head3 TIMING ISSUES
219		233
220	There are two ways to handle timers: based on real time (relative, "fire	234	There are two ways to handle timers: based on real time (relative, "fire
221	in 10 seconds") and based on wallclock time (absolute, "fire at 12	235	in 10 seconds") and based on wallclock time (absolute, "fire at 12
…		…
233	timers.	247	timers.
234		248
235	AnyEvent always prefers relative timers, if available, matching the	249	AnyEvent always prefers relative timers, if available, matching the
236	AnyEvent API.	250	AnyEvent API.
237		251
		252	AnyEvent has two additional methods that return the "current time":
		253
		254	=over 4
		255
		256	=item AnyEvent->time
		257
		258	This returns the "current wallclock time" as a fractional number of
		259	seconds since the Epoch (the same thing as C<time> or C<Time::HiRes::time>
		260	return, and the result is guaranteed to be compatible with those).
		261
		262	It progresses independently of any event loop processing, i.e. each call
		263	will check the system clock, which usually gets updated frequently.
		264
		265	=item AnyEvent->now
		266
		267	This also returns the "current wallclock time", but unlike C<time>, above,
		268	this value might change only once per event loop iteration, depending on
		269	the event loop (most return the same time as C<time>, above). This is the
		270	time that AnyEvent's timers get scheduled against.
		271
		272	I<In almost all cases (in all cases if you don't care), this is the
		273	function to call when you want to know the current time.>
		274
		275	This function is also often faster then C<< AnyEvent->time >>, and
		276	thus the preferred method if you want some timestamp (for example,
		277	L<AnyEvent::Handle> uses this to update it's activity timeouts).
		278
		279	The rest of this section is only of relevance if you try to be very exact
		280	with your timing, you can skip it without bad conscience.
		281
		282	For a practical example of when these times differ, consider L<Event::Lib>
		283	and L<EV> and the following set-up:
		284
		285	The event loop is running and has just invoked one of your callback at
		286	time=500 (assume no other callbacks delay processing). In your callback,
		287	you wait a second by executing C<sleep 1> (blocking the process for a
		288	second) and then (at time=501) you create a relative timer that fires
		289	after three seconds.
		290
		291	With L<Event::Lib>, C<< AnyEvent->time >> and C<< AnyEvent->now >> will
		292	both return C<501>, because that is the current time, and the timer will
		293	be scheduled to fire at time=504 (C<501> + C<3>).
		294
		295	With L<EV>, C<< AnyEvent->time >> returns C<501> (as that is the current
		296	time), but C<< AnyEvent->now >> returns C<500>, as that is the time the
		297	last event processing phase started. With L<EV>, your timer gets scheduled
		298	to run at time=503 (C<500> + C<3>).
		299
		300	In one sense, L<Event::Lib> is more exact, as it uses the current time
		301	regardless of any delays introduced by event processing. However, most
		302	callbacks do not expect large delays in processing, so this causes a
		303	higher drift (and a lot more system calls to get the current time).
		304
		305	In another sense, L<EV> is more exact, as your timer will be scheduled at
		306	the same time, regardless of how long event processing actually took.
		307
		308	In either case, if you care (and in most cases, you don't), then you
		309	can get whatever behaviour you want with any event loop, by taking the
		310	difference between C<< AnyEvent->time >> and C<< AnyEvent->now >> into
		311	account.
		312
		313	=back
		314
238	=head2 SIGNAL WATCHERS	315	=head2 SIGNAL WATCHERS
239		316
240	You can watch for signals using a signal watcher, C<signal> is the signal	317	You can watch for signals using a signal watcher, C<signal> is the signal
241	I<name> without any C<SIG> prefix, C<cb> is the Perl callback to	318	I<name> in uppercase and without any C<SIG> prefix, C<cb> is the Perl
242	be invoked whenever a signal occurs.	319	callback to be invoked whenever a signal occurs.
243		320
244	Although the callback might get passed parameters, their value and	321	Although the callback might get passed parameters, their value and
245	presence is undefined and you cannot rely on them. Portable AnyEvent	322	presence is undefined and you cannot rely on them. Portable AnyEvent
246	callbacks cannot use arguments passed to signal watcher callbacks.	323	callbacks cannot use arguments passed to signal watcher callbacks.
247		324
…		…
283	AnyEvent program, you I<have> to create at least one watcher before you	360	AnyEvent program, you I<have> to create at least one watcher before you
284	C<fork> the child (alternatively, you can call C<AnyEvent::detect>).	361	C<fork> the child (alternatively, you can call C<AnyEvent::detect>).
285		362
286	Example: fork a process and wait for it	363	Example: fork a process and wait for it
287		364
288	my $done = AnyEvent->condvar;	365	my $done = AnyEvent->condvar;
289		366
290	my $pid = fork or exit 5;	367	my $pid = fork or exit 5;
291		368
292	my $w = AnyEvent->child (	369	my $w = AnyEvent->child (
293	pid => $pid,	370	pid => $pid,
294	cb => sub {	371	cb => sub {
295	my ($pid, $status) = @_;	372	my ($pid, $status) = @_;
296	warn "pid $pid exited with status $status";	373	warn "pid $pid exited with status $status";
297	$done->send;	374	$done->send;
298	},	375	},
299	);	376	);
300		377
301	# do something else, then wait for process exit	378	# do something else, then wait for process exit
302	$done->recv;	379	$done->recv;
303		380
304	=head2 CONDITION VARIABLES	381	=head2 CONDITION VARIABLES
305		382
306	If you are familiar with some event loops you will know that all of them	383	If you are familiar with some event loops you will know that all of them
307	require you to run some blocking "loop", "run" or similar function that	384	require you to run some blocking "loop", "run" or similar function that
…		…
313	The instrument to do that is called a "condition variable", so called	390	The instrument to do that is called a "condition variable", so called
314	because they represent a condition that must become true.	391	because they represent a condition that must become true.
315		392
316	Condition variables can be created by calling the C<< AnyEvent->condvar	393	Condition variables can be created by calling the C<< AnyEvent->condvar
317	>> method, usually without arguments. The only argument pair allowed is	394	>> method, usually without arguments. The only argument pair allowed is
		395
318	C<cb>, which specifies a callback to be called when the condition variable	396	C<cb>, which specifies a callback to be called when the condition variable
319	becomes true.	397	becomes true, with the condition variable as the first argument (but not
		398	the results).
320		399
321	After creation, the condition variable is "false" until it becomes "true"	400	After creation, the condition variable is "false" until it becomes "true"
322	by calling the C<send> method (or calling the condition variable as if it	401	by calling the C<send> method (or calling the condition variable as if it
323	were a callback, read about the caveats in the description for the C<<	402	were a callback, read about the caveats in the description for the C<<
324	->send >> method).	403	->send >> method).
…		…
380		459
381	my $done = AnyEvent->condvar;	460	my $done = AnyEvent->condvar;
382	my $delay = AnyEvent->timer (after => 5, cb => $done);	461	my $delay = AnyEvent->timer (after => 5, cb => $done);
383	$done->recv;	462	$done->recv;
384		463
		464	Example: Imagine an API that returns a condvar and doesn't support
		465	callbacks. This is how you make a synchronous call, for example from
		466	the main program:
		467
		468	use AnyEvent::CouchDB;
		469
		470	...
		471
		472	my @info = $couchdb->info->recv;
		473
		474	And this is how you would just ste a callback to be called whenever the
		475	results are available:
		476
		477	$couchdb->info->cb (sub {
		478	my @info = $_[0]->recv;
		479	});
		480
385	=head3 METHODS FOR PRODUCERS	481	=head3 METHODS FOR PRODUCERS
386		482
387	These methods should only be used by the producing side, i.e. the	483	These methods should only be used by the producing side, i.e. the
388	code/module that eventually sends the signal. Note that it is also	484	code/module that eventually sends the signal. Note that it is also
389	the producer side which creates the condvar in most cases, but it isn't	485	the producer side which creates the condvar in most cases, but it isn't
…		…
522	=item $bool = $cv->ready	618	=item $bool = $cv->ready
523		619
524	Returns true when the condition is "true", i.e. whether C<send> or	620	Returns true when the condition is "true", i.e. whether C<send> or
525	C<croak> have been called.	621	C<croak> have been called.
526		622
527	=item $cb = $cv->cb ([new callback])	623	=item $cb = $cv->cb ($cb->($cv))
528		624
529	This is a mutator function that returns the callback set and optionally	625	This is a mutator function that returns the callback set and optionally
530	replaces it before doing so.	626	replaces it before doing so.
531		627
532	The callback will be called when the condition becomes "true", i.e. when	628	The callback will be called when the condition becomes "true", i.e. when
533	C<send> or C<croak> are called. Calling C<recv> inside the callback	629	C<send> or C<croak> are called, with the only argument being the condition
534	or at any later time is guaranteed not to block.	630	variable itself. Calling C<recv> inside the callback or at any later time
		631	is guaranteed not to block.
535		632
536	=back	633	=back
537		634
538	=head1 GLOBAL VARIABLES AND FUNCTIONS	635	=head1 GLOBAL VARIABLES AND FUNCTIONS
539		636
…		…
668	=item L<AnyEvent::Util>	765	=item L<AnyEvent::Util>
669		766
670	Contains various utility functions that replace often-used but blocking	767	Contains various utility functions that replace often-used but blocking
671	functions such as C<inet_aton> by event-/callback-based versions.	768	functions such as C<inet_aton> by event-/callback-based versions.
672		769
673	=item L<AnyEvent::Handle>
674
675	Provide read and write buffers and manages watchers for reads and writes.
676
677	=item L<AnyEvent::Socket>	770	=item L<AnyEvent::Socket>
678		771
679	Provides various utility functions for (internet protocol) sockets,	772	Provides various utility functions for (internet protocol) sockets,
680	addresses and name resolution. Also functions to create non-blocking tcp	773	addresses and name resolution. Also functions to create non-blocking tcp
681	connections or tcp servers, with IPv6 and SRV record support and more.	774	connections or tcp servers, with IPv6 and SRV record support and more.
682		775
		776	=item L<AnyEvent::Handle>
		777
		778	Provide read and write buffers, manages watchers for reads and writes,
		779	supports raw and formatted I/O, I/O queued and fully transparent and
		780	non-blocking SSL/TLS.
		781
683	=item L<AnyEvent::DNS>	782	=item L<AnyEvent::DNS>
684		783
685	Provides rich asynchronous DNS resolver capabilities.	784	Provides rich asynchronous DNS resolver capabilities.
686		785
		786	=item L<AnyEvent::HTTP>
		787
		788	A simple-to-use HTTP library that is capable of making a lot of concurrent
		789	HTTP requests.
		790
687	=item L<AnyEvent::HTTPD>	791	=item L<AnyEvent::HTTPD>
688		792
689	Provides a simple web application server framework.	793	Provides a simple web application server framework.
690		794
691	=item L<AnyEvent::FastPing>	795	=item L<AnyEvent::FastPing>
692		796
693	The fastest ping in the west.	797	The fastest ping in the west.
		798
		799	=item L<AnyEvent::DBI>
		800
		801	Executes L<DBI> requests asynchronously in a proxy process.
		802
		803	=item L<AnyEvent::AIO>
		804
		805	Truly asynchronous I/O, should be in the toolbox of every event
		806	programmer. AnyEvent::AIO transparently fuses L<IO::AIO> and AnyEvent
		807	together.
		808
		809	=item L<AnyEvent::BDB>
		810
		811	Truly asynchronous Berkeley DB access. AnyEvent::BDB transparently fuses
		812	L<BDB> and AnyEvent together.
		813
		814	=item L<AnyEvent::GPSD>
		815
		816	A non-blocking interface to gpsd, a daemon delivering GPS information.
		817
		818	=item L<AnyEvent::IGS>
		819
		820	A non-blocking interface to the Internet Go Server protocol (used by
		821	L<App::IGS>).
694		822
695	=item L<Net::IRC3>	823	=item L<Net::IRC3>
696		824
697	AnyEvent based IRC client module family.	825	AnyEvent based IRC client module family.
698		826
…		…
711		839
712	=item L<Coro>	840	=item L<Coro>
713		841
714	Has special support for AnyEvent via L<Coro::AnyEvent>.	842	Has special support for AnyEvent via L<Coro::AnyEvent>.
715		843
716	=item L<AnyEvent::AIO>, L<IO::AIO>
717
718	Truly asynchronous I/O, should be in the toolbox of every event
719	programmer. AnyEvent::AIO transparently fuses IO::AIO and AnyEvent
720	together.
721
722	=item L<AnyEvent::BDB>, L<BDB>
723
724	Truly asynchronous Berkeley DB access. AnyEvent::AIO transparently fuses
725	IO::AIO and AnyEvent together.
726
727	=item L<IO::Lambda>	844	=item L<IO::Lambda>
728		845
729	The lambda approach to I/O - don't ask, look there. Can use AnyEvent.	846	The lambda approach to I/O - don't ask, look there. Can use AnyEvent.
730		847
731	=back	848	=back
…		…
733	=cut	850	=cut
734		851
735	package AnyEvent;	852	package AnyEvent;
736		853
737	no warnings;	854	no warnings;
738	use strict;	855	use strict qw(vars subs);
739		856
740	use Carp;	857	use Carp;
741		858
742	our $VERSION = '4.05';	859	our $VERSION = 4.233;
743	our $MODEL;	860	our $MODEL;
744		861
745	our $AUTOLOAD;	862	our $AUTOLOAD;
746	our @ISA;	863	our @ISA;
747		864
…		…
779	[POE::Kernel:: => AnyEvent::Impl::POE::], # lasciate ogni speranza	896	[POE::Kernel:: => AnyEvent::Impl::POE::], # lasciate ogni speranza
780	[Wx:: => AnyEvent::Impl::POE::],	897	[Wx:: => AnyEvent::Impl::POE::],
781	[Prima:: => AnyEvent::Impl::POE::],	898	[Prima:: => AnyEvent::Impl::POE::],
782	);	899	);
783		900
784	our %method = map +($_ => 1), qw(io timer signal child condvar one_event DESTROY);	901	our %method = map +($_ => 1), qw(io timer time now signal child condvar one_event DESTROY);
785		902
786	our @post_detect;	903	our @post_detect;
787		904
788	sub post_detect(&) {	905	sub post_detect(&) {
789	my ($cb) = @_;	906	my ($cb) = @_;
…		…
850	$MODEL	967	$MODEL
851	or die "No event module selected for AnyEvent and autodetect failed. Install any one of these modules: EV, Event or Glib.";	968	or die "No event module selected for AnyEvent and autodetect failed. Install any one of these modules: EV, Event or Glib.";
852	}	969	}
853	}	970	}
854		971
		972	push @{"$MODEL\::ISA"}, "AnyEvent::Base";
		973
855	unshift @ISA, $MODEL;	974	unshift @ISA, $MODEL;
856	push @{"$MODEL\::ISA"}, "AnyEvent::Base";	975
		976	require AnyEvent::Strict if $ENV{PERL_ANYEVENT_STRICT};
857		977
858	(shift @post_detect)->() while @post_detect;	978	(shift @post_detect)->() while @post_detect;
859	}	979	}
860		980
861	$MODEL	981	$MODEL
…		…
871		991
872	my $class = shift;	992	my $class = shift;
873	$class->$func (@_);	993	$class->$func (@_);
874	}	994	}
875		995
		996	# utility function to dup a filehandle. this is used by many backends
		997	# to support binding more than one watcher per filehandle (they usually
		998	# allow only one watcher per fd, so we dup it to get a different one).
		999	sub _dupfh($$$$) {
		1000	my ($poll, $fh, $r, $w) = @_;
		1001
		1002	require Fcntl;
		1003
		1004	# cygwin requires the fh mode to be matching, unix doesn't
		1005	my ($rw, $mode) = $poll eq "r" ? ($r, "<")
		1006	: $poll eq "w" ? ($w, ">")
		1007	: Carp::croak "AnyEvent->io requires poll set to either 'r' or 'w'";
		1008
		1009	open my $fh2, "$mode&" . fileno $fh
		1010	or die "cannot dup() filehandle: $!";
		1011
		1012	# we assume CLOEXEC is already set by perl in all important cases
		1013
		1014	($fh2, $rw)
		1015	}
		1016
876	package AnyEvent::Base;	1017	package AnyEvent::Base;
		1018
		1019	# default implementation for now and time
		1020
		1021	BEGIN {
		1022	if (eval "use Time::HiRes (); time (); 1") {
		1023	*_time = \&Time::HiRes::time;
		1024	# if (eval "use POSIX (); (POSIX::times())...
		1025	} else {
		1026	*_time = \&CORE::time; # epic fail
		1027	}
		1028	}
		1029
		1030	sub time { _time }
		1031	sub now { _time }
877		1032
878	# default implementation for ->condvar	1033	# default implementation for ->condvar
879		1034
880	sub condvar {	1035	sub condvar {
881	bless { @_ == 3 ? (_ae_cb => $_[2]) : () }, AnyEvent::CondVar::	1036	bless { @_ == 3 ? (_ae_cb => $_[2]) : () }, AnyEvent::CondVar::
…		…
902	sub AnyEvent::Base::Signal::DESTROY {	1057	sub AnyEvent::Base::Signal::DESTROY {
903	my ($signal, $cb) = @{$_[0]};	1058	my ($signal, $cb) = @{$_[0]};
904		1059
905	delete $SIG_CB{$signal}{$cb};	1060	delete $SIG_CB{$signal}{$cb};
906		1061
907	$SIG{$signal} = 'DEFAULT' unless keys %{ $SIG_CB{$signal} };	1062	delete $SIG{$signal} unless keys %{ $SIG_CB{$signal} };
908	}	1063	}
909		1064
910	# default implementation for ->child	1065	# default implementation for ->child
911		1066
912	our %PID_CB;	1067	our %PID_CB;
…		…
1020		1175
1021	# undocumented/compatibility with pre-3.4	1176	# undocumented/compatibility with pre-3.4
1022	*broadcast = \&send;	1177	*broadcast = \&send;
1023	*wait = \&_wait;	1178	*wait = \&_wait;
1024		1179
		1180	=head1 ERROR AND EXCEPTION HANDLING
		1181
		1182	In general, AnyEvent does not do any error handling - it relies on the
		1183	caller to do that if required. The L<AnyEvent::Strict> module (see also
		1184	the C<PERL_ANYEVENT_STRICT> environment variable, below) provides strict
		1185	checking of all AnyEvent methods, however, which is highly useful during
		1186	development.
		1187
		1188	As for exception handling (i.e. runtime errors and exceptions thrown while
		1189	executing a callback), this is not only highly event-loop specific, but
		1190	also not in any way wrapped by this module, as this is the job of the main
		1191	program.
		1192
		1193	The pure perl event loop simply re-throws the exception (usually
		1194	within C<< condvar->recv >>), the L<Event> and L<EV> modules call C<<
		1195	$Event/EV::DIED->() >>, L<Glib> uses C<< install_exception_handler >> and
		1196	so on.
		1197
		1198	=head1 ENVIRONMENT VARIABLES
		1199
		1200	The following environment variables are used by this module or its
		1201	submodules:
		1202
		1203	=over 4
		1204
		1205	=item C<PERL_ANYEVENT_VERBOSE>
		1206
		1207	By default, AnyEvent will be completely silent except in fatal
		1208	conditions. You can set this environment variable to make AnyEvent more
		1209	talkative.
		1210
		1211	When set to C<1> or higher, causes AnyEvent to warn about unexpected
		1212	conditions, such as not being able to load the event model specified by
		1213	C<PERL_ANYEVENT_MODEL>.
		1214
		1215	When set to C<2> or higher, cause AnyEvent to report to STDERR which event
		1216	model it chooses.
		1217
		1218	=item C<PERL_ANYEVENT_STRICT>
		1219
		1220	AnyEvent does not do much argument checking by default, as thorough
		1221	argument checking is very costly. Setting this variable to a true value
		1222	will cause AnyEvent to load C<AnyEvent::Strict> and then to thoroughly
		1223	check the arguments passed to most method calls. If it finds any problems
		1224	it will croak.
		1225
		1226	In other words, enables "strict" mode.
		1227
		1228	Unlike C<use strict>, it is definitely recommended ot keep it off in
		1229	production. Keeping C<PERL_ANYEVENT_STRICT=1> in your environment while
		1230	developing programs can be very useful, however.
		1231
		1232	=item C<PERL_ANYEVENT_MODEL>
		1233
		1234	This can be used to specify the event model to be used by AnyEvent, before
		1235	auto detection and -probing kicks in. It must be a string consisting
		1236	entirely of ASCII letters. The string C<AnyEvent::Impl::> gets prepended
		1237	and the resulting module name is loaded and if the load was successful,
		1238	used as event model. If it fails to load AnyEvent will proceed with
		1239	auto detection and -probing.
		1240
		1241	This functionality might change in future versions.
		1242
		1243	For example, to force the pure perl model (L<AnyEvent::Impl::Perl>) you
		1244	could start your program like this:
		1245
		1246	PERL_ANYEVENT_MODEL=Perl perl ...
		1247
		1248	=item C<PERL_ANYEVENT_PROTOCOLS>
		1249
		1250	Used by both L<AnyEvent::DNS> and L<AnyEvent::Socket> to determine preferences
		1251	for IPv4 or IPv6. The default is unspecified (and might change, or be the result
		1252	of auto probing).
		1253
		1254	Must be set to a comma-separated list of protocols or address families,
		1255	current supported: C<ipv4> and C<ipv6>. Only protocols mentioned will be
		1256	used, and preference will be given to protocols mentioned earlier in the
		1257	list.
		1258
		1259	This variable can effectively be used for denial-of-service attacks
		1260	against local programs (e.g. when setuid), although the impact is likely
		1261	small, as the program has to handle connection errors already-
		1262
		1263	Examples: C<PERL_ANYEVENT_PROTOCOLS=ipv4,ipv6> - prefer IPv4 over IPv6,
		1264	but support both and try to use both. C<PERL_ANYEVENT_PROTOCOLS=ipv4>
		1265	- only support IPv4, never try to resolve or contact IPv6
		1266	addresses. C<PERL_ANYEVENT_PROTOCOLS=ipv6,ipv4> support either IPv4 or
		1267	IPv6, but prefer IPv6 over IPv4.
		1268
		1269	=item C<PERL_ANYEVENT_EDNS0>
		1270
		1271	Used by L<AnyEvent::DNS> to decide whether to use the EDNS0 extension
		1272	for DNS. This extension is generally useful to reduce DNS traffic, but
		1273	some (broken) firewalls drop such DNS packets, which is why it is off by
		1274	default.
		1275
		1276	Setting this variable to C<1> will cause L<AnyEvent::DNS> to announce
		1277	EDNS0 in its DNS requests.
		1278
		1279	=item C<PERL_ANYEVENT_MAX_FORKS>
		1280
		1281	The maximum number of child processes that C<AnyEvent::Util::fork_call>
		1282	will create in parallel.
		1283
		1284	=back
		1285
1025	=head1 SUPPLYING YOUR OWN EVENT MODEL INTERFACE	1286	=head1 SUPPLYING YOUR OWN EVENT MODEL INTERFACE
1026		1287
1027	This is an advanced topic that you do not normally need to use AnyEvent in	1288	This is an advanced topic that you do not normally need to use AnyEvent in
1028	a module. This section is only of use to event loop authors who want to	1289	a module. This section is only of use to event loop authors who want to
1029	provide AnyEvent compatibility.	1290	provide AnyEvent compatibility.
…		…
1062		1323
1063	I<rxvt-unicode> also cheats a bit by not providing blocking access to	1324	I<rxvt-unicode> also cheats a bit by not providing blocking access to
1064	condition variables: code blocking while waiting for a condition will	1325	condition variables: code blocking while waiting for a condition will
1065	C<die>. This still works with most modules/usages, and blocking calls must	1326	C<die>. This still works with most modules/usages, and blocking calls must
1066	not be done in an interactive application, so it makes sense.	1327	not be done in an interactive application, so it makes sense.
1067
1068	=head1 ENVIRONMENT VARIABLES
1069
1070	The following environment variables are used by this module:
1071
1072	=over 4
1073
1074	=item C<PERL_ANYEVENT_VERBOSE>
1075
1076	By default, AnyEvent will be completely silent except in fatal
1077	conditions. You can set this environment variable to make AnyEvent more
1078	talkative.
1079
1080	When set to C<1> or higher, causes AnyEvent to warn about unexpected
1081	conditions, such as not being able to load the event model specified by
1082	C<PERL_ANYEVENT_MODEL>.
1083
1084	When set to C<2> or higher, cause AnyEvent to report to STDERR which event
1085	model it chooses.
1086
1087	=item C<PERL_ANYEVENT_MODEL>
1088
1089	This can be used to specify the event model to be used by AnyEvent, before
1090	auto detection and -probing kicks in. It must be a string consisting
1091	entirely of ASCII letters. The string C<AnyEvent::Impl::> gets prepended
1092	and the resulting module name is loaded and if the load was successful,
1093	used as event model. If it fails to load AnyEvent will proceed with
1094	auto detection and -probing.
1095
1096	This functionality might change in future versions.
1097
1098	For example, to force the pure perl model (L<AnyEvent::Impl::Perl>) you
1099	could start your program like this:
1100
1101	PERL_ANYEVENT_MODEL=Perl perl ...
1102
1103	=item C<PERL_ANYEVENT_PROTOCOLS>
1104
1105	Used by both L<AnyEvent::DNS> and L<AnyEvent::Socket> to determine preferences
1106	for IPv4 or IPv6. The default is unspecified (and might change, or be the result
1107	of auto probing).
1108
1109	Must be set to a comma-separated list of protocols or address families,
1110	current supported: C<ipv4> and C<ipv6>. Only protocols mentioned will be
1111	used, and preference will be given to protocols mentioned earlier in the
1112	list.
1113
1114	This variable can effectively be used for denial-of-service attacks
1115	against local programs (e.g. when setuid), although the impact is likely
1116	small, as the program has to handle connection errors already-
1117
1118	Examples: C<PERL_ANYEVENT_PROTOCOLS=ipv4,ipv6> - prefer IPv4 over IPv6,
1119	but support both and try to use both. C<PERL_ANYEVENT_PROTOCOLS=ipv4>
1120	- only support IPv4, never try to resolve or contact IPv6
1121	addresses. C<PERL_ANYEVENT_PROTOCOLS=ipv6,ipv4> support either IPv4 or
1122	IPv6, but prefer IPv6 over IPv4.
1123
1124	=item C<PERL_ANYEVENT_EDNS0>
1125
1126	Used by L<AnyEvent::DNS> to decide whether to use the EDNS0 extension
1127	for DNS. This extension is generally useful to reduce DNS traffic, but
1128	some (broken) firewalls drop such DNS packets, which is why it is off by
1129	default.
1130
1131	Setting this variable to C<1> will cause L<AnyEvent::DNS> to announce
1132	EDNS0 in its DNS requests.
1133
1134	=item C<PERL_ANYEVENT_MAX_FORKS>
1135
1136	The maximum number of child processes that C<AnyEvent::Util::fork_call>
1137	will create in parallel.
1138
1139	=back
1140		1328
1141	=head1 EXAMPLE PROGRAM	1329	=head1 EXAMPLE PROGRAM
1142		1330
1143	The following program uses an I/O watcher to read data from STDIN, a timer	1331	The following program uses an I/O watcher to read data from STDIN, a timer
1144	to display a message once per second, and a condition variable to quit the	1332	to display a message once per second, and a condition variable to quit the
…		…
1581	specified in the variable.	1769	specified in the variable.
1582		1770
1583	You can make AnyEvent completely ignore this variable by deleting it	1771	You can make AnyEvent completely ignore this variable by deleting it
1584	before the first watcher gets created, e.g. with a C<BEGIN> block:	1772	before the first watcher gets created, e.g. with a C<BEGIN> block:
1585		1773
1586	BEGIN { delete $ENV{PERL_ANYEVENT_MODEL} }	1774	BEGIN { delete $ENV{PERL_ANYEVENT_MODEL} }
1587		1775
1588	use AnyEvent;	1776	use AnyEvent;
1589		1777
1590	Similar considerations apply to $ENV{PERL_ANYEVENT_VERBOSE}, as that can	1778	Similar considerations apply to $ENV{PERL_ANYEVENT_VERBOSE}, as that can
1591	be used to probe what backend is used and gain other information (which is	1779	be used to probe what backend is used and gain other information (which is
1592	probably even less useful to an attacker than PERL_ANYEVENT_MODEL).	1780	probably even less useful to an attacker than PERL_ANYEVENT_MODEL), and
		1781	$ENV{PERL_ANYEGENT_STRICT}.
		1782
		1783
		1784	=head1 BUGS
		1785
		1786	Perl 5.8 has numerous memleaks that sometimes hit this module and are hard
		1787	to work around. If you suffer from memleaks, first upgrade to Perl 5.10
		1788	and check wether the leaks still show up. (Perl 5.10.0 has other annoying
		1789	mamleaks, such as leaking on C<map> and C<grep> but it is usually not as
		1790	pronounced).
1593		1791
1594		1792
1595	=head1 SEE ALSO	1793	=head1 SEE ALSO
1596		1794
1597	Utility functions: L<AnyEvent::Util>.	1795	Utility functions: L<AnyEvent::Util>.
…		…
1614	Nontrivial usage examples: L<Net::FCP>, L<Net::XMPP2>, L<AnyEvent::DNS>.	1812	Nontrivial usage examples: L<Net::FCP>, L<Net::XMPP2>, L<AnyEvent::DNS>.
1615		1813
1616		1814
1617	=head1 AUTHOR	1815	=head1 AUTHOR
1618		1816
1619	Marc Lehmann <schmorp@schmorp.de>	1817	Marc Lehmann <schmorp@schmorp.de>
1620	http://home.schmorp.de/	1818	http://home.schmorp.de/
1621		1819
1622	=cut	1820	=cut
1623		1821
1624	1	1822	1
1625		1823

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent.pm (file contents): Revision 1.142 by root, Tue May 27 02:34:30 2008 UTC vs. Revision 1.180 by root, Sat Sep 6 07:00:45 2008 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent.pm (file contents):
Revision 1.142 by root, Tue May 27 02:34:30 2008 UTC vs.
Revision 1.180 by root, Sat Sep 6 07:00:45 2008 UTC