ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent.pm

Comparing AnyEvent/lib/AnyEvent.pm (file contents):
Revision 1.171 by root, Wed Jul 16 21:17:59 2008 UTC vs.
Revision 1.309 by root, Sat Dec 26 08:59:35 2009 UTC

1	=head1 NAME	1	=head1 NAME
2		2
3	AnyEvent - provide framework for multiple event loops	3	AnyEvent - the DBI of event loop programming
4		4
5	EV, Event, Glib, Tk, Perl, Event::Lib, Qt, POE - various supported event loops	5	EV, Event, Glib, Tk, Perl, Event::Lib, Irssi, rxvt-unicode, IO::Async, Qt
		6	and POE are various supported event loops/environments.
6		7
7	=head1 SYNOPSIS	8	=head1 SYNOPSIS
8		9
9	use AnyEvent;	10	use AnyEvent;
10		11
		12	# file descriptor readable
11	my $w = AnyEvent->io (fh => $fh, poll => "r|w", cb => sub {	13	my $w = AnyEvent->io (fh => $fh, poll => "r", cb => sub { ... });
		14
		15	# one-shot or repeating timers
		16	my $w = AnyEvent->timer (after => $seconds, cb => sub { ... });
		17	my $w = AnyEvent->timer (after => $seconds, interval => $seconds, cb => ...
		18
		19	print AnyEvent->now; # prints current event loop time
		20	print AnyEvent->time; # think Time::HiRes::time or simply CORE::time.
		21
		22	# POSIX signal
		23	my $w = AnyEvent->signal (signal => "TERM", cb => sub { ... });
		24
		25	# child process exit
		26	my $w = AnyEvent->child (pid => $pid, cb => sub {
		27	my ($pid, $status) = @_;
12	...	28	...
13	});	29	});
14		30
15	my $w = AnyEvent->timer (after => $seconds, cb => sub {	31	# called when event loop idle (if applicable)
16	...	32	my $w = AnyEvent->idle (cb => sub { ... });
17	});
18		33
19	my $w = AnyEvent->condvar; # stores whether a condition was flagged	34	my $w = AnyEvent->condvar; # stores whether a condition was flagged
20	$w->send; # wake up current and all future recv's	35	$w->send; # wake up current and all future recv's
21	$w->recv; # enters "main loop" till $condvar gets ->send	36	$w->recv; # enters "main loop" till $condvar gets ->send
		37	# use a condvar in callback mode:
		38	$w->cb (sub { $_[0]->recv });
22		39
23	=head1 INTRODUCTION/TUTORIAL	40	=head1 INTRODUCTION/TUTORIAL
24		41
25	This manpage is mainly a reference manual. If you are interested	42	This manpage is mainly a reference manual. If you are interested
26	in a tutorial or some gentle introduction, have a look at the	43	in a tutorial or some gentle introduction, have a look at the
27	L<AnyEvent::Intro> manpage.	44	L<AnyEvent::Intro> manpage.
		45
		46	=head1 SUPPORT
		47
		48	There is a mailinglist for discussing all things AnyEvent, and an IRC
		49	channel, too.
		50
		51	See the AnyEvent project page at the B<Schmorpforge Ta-Sa Software
		52	Repository>, at L<http://anyevent.schmorp.de>, for more info.
28		53
29	=head1 WHY YOU SHOULD USE THIS MODULE (OR NOT)	54	=head1 WHY YOU SHOULD USE THIS MODULE (OR NOT)
30		55
31	Glib, POE, IO::Async, Event... CPAN offers event models by the dozen	56	Glib, POE, IO::Async, Event... CPAN offers event models by the dozen
32	nowadays. So what is different about AnyEvent?	57	nowadays. So what is different about AnyEvent?
…		…
128	These watchers are normal Perl objects with normal Perl lifetime. After	153	These watchers are normal Perl objects with normal Perl lifetime. After
129	creating a watcher it will immediately "watch" for events and invoke the	154	creating a watcher it will immediately "watch" for events and invoke the
130	callback when the event occurs (of course, only when the event model	155	callback when the event occurs (of course, only when the event model
131	is in control).	156	is in control).
132		157
		158	Note that B<callbacks must not permanently change global variables>
		159	potentially in use by the event loop (such as C<$_> or C<$[>) and that B<<
		160	callbacks must not C<die> >>. The former is good programming practise in
		161	Perl and the latter stems from the fact that exception handling differs
		162	widely between event loops.
		163
133	To disable the watcher you have to destroy it (e.g. by setting the	164	To disable the watcher you have to destroy it (e.g. by setting the
134	variable you store it in to C<undef> or otherwise deleting all references	165	variable you store it in to C<undef> or otherwise deleting all references
135	to it).	166	to it).
136		167
137	All watchers are created by calling a method on the C<AnyEvent> class.	168	All watchers are created by calling a method on the C<AnyEvent> class.
…		…
150	my variables are only visible after the statement in which they are	181	my variables are only visible after the statement in which they are
151	declared.	182	declared.
152		183
153	=head2 I/O WATCHERS	184	=head2 I/O WATCHERS
154		185
		186	$w = AnyEvent->io (
		187	fh => <filehandle_or_fileno>,
		188	poll => <"r" or "w">,
		189	cb => <callback>,
		190	);
		191
155	You can create an I/O watcher by calling the C<< AnyEvent->io >> method	192	You can create an I/O watcher by calling the C<< AnyEvent->io >> method
156	with the following mandatory key-value pairs as arguments:	193	with the following mandatory key-value pairs as arguments:
157		194
158	C<fh> the Perl I<file handle> (I<not> file descriptor) to watch for events	195	C<fh> is the Perl I<file handle> (or a naked file descriptor) to watch
159	(AnyEvent might or might not keep a reference to this file handle). C<poll>	196	for events (AnyEvent might or might not keep a reference to this file
		197	handle). Note that only file handles pointing to things for which
		198	non-blocking operation makes sense are allowed. This includes sockets,
		199	most character devices, pipes, fifos and so on, but not for example files
		200	or block devices.
		201
160	must be a string that is either C<r> or C<w>, which creates a watcher	202	C<poll> must be a string that is either C<r> or C<w>, which creates a
161	waiting for "r"eadable or "w"ritable events, respectively. C<cb> is the	203	watcher waiting for "r"eadable or "w"ritable events, respectively.
		204
162	callback to invoke each time the file handle becomes ready.	205	C<cb> is the callback to invoke each time the file handle becomes ready.
163		206
164	Although the callback might get passed parameters, their value and	207	Although the callback might get passed parameters, their value and
165	presence is undefined and you cannot rely on them. Portable AnyEvent	208	presence is undefined and you cannot rely on them. Portable AnyEvent
166	callbacks cannot use arguments passed to I/O watcher callbacks.	209	callbacks cannot use arguments passed to I/O watcher callbacks.
167		210
…		…
182	undef $w;	225	undef $w;
183	});	226	});
184		227
185	=head2 TIME WATCHERS	228	=head2 TIME WATCHERS
186		229
		230	$w = AnyEvent->timer (after => <seconds>, cb => <callback>);
		231
		232	$w = AnyEvent->timer (
		233	after => <fractional_seconds>,
		234	interval => <fractional_seconds>,
		235	cb => <callback>,
		236	);
		237
187	You can create a time watcher by calling the C<< AnyEvent->timer >>	238	You can create a time watcher by calling the C<< AnyEvent->timer >>
188	method with the following mandatory arguments:	239	method with the following mandatory arguments:
189		240
190	C<after> specifies after how many seconds (fractional values are	241	C<after> specifies after how many seconds (fractional values are
191	supported) the callback should be invoked. C<cb> is the callback to invoke	242	supported) the callback should be invoked. C<cb> is the callback to invoke
…		…
299	In either case, if you care (and in most cases, you don't), then you	350	In either case, if you care (and in most cases, you don't), then you
300	can get whatever behaviour you want with any event loop, by taking the	351	can get whatever behaviour you want with any event loop, by taking the
301	difference between C<< AnyEvent->time >> and C<< AnyEvent->now >> into	352	difference between C<< AnyEvent->time >> and C<< AnyEvent->now >> into
302	account.	353	account.
303		354
		355	=item AnyEvent->now_update
		356
		357	Some event loops (such as L<EV> or L<AnyEvent::Impl::Perl>) cache
		358	the current time for each loop iteration (see the discussion of L<<
		359	AnyEvent->now >>, above).
		360
		361	When a callback runs for a long time (or when the process sleeps), then
		362	this "current" time will differ substantially from the real time, which
		363	might affect timers and time-outs.
		364
		365	When this is the case, you can call this method, which will update the
		366	event loop's idea of "current time".
		367
		368	A typical example would be a script in a web server (e.g. C<mod_perl>) -
		369	when mod_perl executes the script, then the event loop will have the wrong
		370	idea about the "current time" (being potentially far in the past, when the
		371	script ran the last time). In that case you should arrange a call to C<<
		372	AnyEvent->now_update >> each time the web server process wakes up again
		373	(e.g. at the start of your script, or in a handler).
		374
		375	Note that updating the time I<might> cause some events to be handled.
		376
304	=back	377	=back
305		378
306	=head2 SIGNAL WATCHERS	379	=head2 SIGNAL WATCHERS
		380
		381	$w = AnyEvent->signal (signal => <uppercase_signal_name>, cb => <callback>);
307		382
308	You can watch for signals using a signal watcher, C<signal> is the signal	383	You can watch for signals using a signal watcher, C<signal> is the signal
309	I<name> in uppercase and without any C<SIG> prefix, C<cb> is the Perl	384	I<name> in uppercase and without any C<SIG> prefix, C<cb> is the Perl
310	callback to be invoked whenever a signal occurs.	385	callback to be invoked whenever a signal occurs.
311		386
…		…
317	invocation, and callback invocation will be synchronous. Synchronous means	392	invocation, and callback invocation will be synchronous. Synchronous means
318	that it might take a while until the signal gets handled by the process,	393	that it might take a while until the signal gets handled by the process,
319	but it is guaranteed not to interrupt any other callbacks.	394	but it is guaranteed not to interrupt any other callbacks.
320		395
321	The main advantage of using these watchers is that you can share a signal	396	The main advantage of using these watchers is that you can share a signal
322	between multiple watchers.	397	between multiple watchers, and AnyEvent will ensure that signals will not
		398	interrupt your program at bad times.
323		399
324	This watcher might use C<%SIG>, so programs overwriting those signals	400	This watcher might use C<%SIG> (depending on the event loop used),
325	directly will likely not work correctly.	401	so programs overwriting those signals directly will likely not work
		402	correctly.
326		403
327	Example: exit on SIGINT	404	Example: exit on SIGINT
328		405
329	my $w = AnyEvent->signal (signal => "INT", cb => sub { exit 1 });	406	my $w = AnyEvent->signal (signal => "INT", cb => sub { exit 1 });
330		407
		408	=head3 Restart Behaviour
		409
		410	While restart behaviour is up to the event loop implementation, most will
		411	not restart syscalls (that includes L<Async::Interrupt> and AnyEvent's
		412	pure perl implementation).
		413
		414	=head3 Safe/Unsafe Signals
		415
		416	Perl signals can be either "safe" (synchronous to opcode handling) or
		417	"unsafe" (asynchronous) - the former might get delayed indefinitely, the
		418	latter might corrupt your memory.
		419
		420	AnyEvent signal handlers are, in addition, synchronous to the event loop,
		421	i.e. they will not interrupt your running perl program but will only be
		422	called as part of the normal event handling (just like timer, I/O etc.
		423	callbacks, too).
		424
		425	=head3 Signal Races, Delays and Workarounds
		426
		427	Many event loops (e.g. Glib, Tk, Qt, IO::Async) do not support attaching
		428	callbacks to signals in a generic way, which is a pity, as you cannot
		429	do race-free signal handling in perl, requiring C libraries for
		430	this. AnyEvent will try to do it's best, which means in some cases,
		431	signals will be delayed. The maximum time a signal might be delayed is
		432	specified in C<$AnyEvent::MAX_SIGNAL_LATENCY> (default: 10 seconds). This
		433	variable can be changed only before the first signal watcher is created,
		434	and should be left alone otherwise. This variable determines how often
		435	AnyEvent polls for signals (in case a wake-up was missed). Higher values
		436	will cause fewer spurious wake-ups, which is better for power and CPU
		437	saving.
		438
		439	All these problems can be avoided by installing the optional
		440	L<Async::Interrupt> module, which works with most event loops. It will not
		441	work with inherently broken event loops such as L<Event> or L<Event::Lib>
		442	(and not with L<POE> currently, as POE does it's own workaround with
		443	one-second latency). For those, you just have to suffer the delays.
		444
331	=head2 CHILD PROCESS WATCHERS	445	=head2 CHILD PROCESS WATCHERS
332		446
		447	$w = AnyEvent->child (pid => <process id>, cb => <callback>);
		448
333	You can also watch on a child process exit and catch its exit status.	449	You can also watch on a child process exit and catch its exit status.
334		450
335	The child process is specified by the C<pid> argument (if set to C<0>, it	451	The child process is specified by the C<pid> argument (one some backends,
336	watches for any child process exit). The watcher will trigger as often	452	using C<0> watches for any child process exit, on others this will
337	as status change for the child are received. This works by installing a	453	croak). The watcher will be triggered only when the child process has
338	signal handler for C<SIGCHLD>. The callback will be called with the pid	454	finished and an exit status is available, not on any trace events
339	and exit status (as returned by waitpid), so unlike other watcher types,	455	(stopped/continued).
340	you I<can> rely on child watcher callback arguments.	456
		457	The callback will be called with the pid and exit status (as returned by
		458	waitpid), so unlike other watcher types, you I<can> rely on child watcher
		459	callback arguments.
		460
		461	This watcher type works by installing a signal handler for C<SIGCHLD>,
		462	and since it cannot be shared, nothing else should use SIGCHLD or reap
		463	random child processes (waiting for specific child processes, e.g. inside
		464	C<system>, is just fine).
341		465
342	There is a slight catch to child watchers, however: you usually start them	466	There is a slight catch to child watchers, however: you usually start them
343	I<after> the child process was created, and this means the process could	467	I<after> the child process was created, and this means the process could
344	have exited already (and no SIGCHLD will be sent anymore).	468	have exited already (and no SIGCHLD will be sent anymore).
345		469
346	Not all event models handle this correctly (POE doesn't), but even for	470	Not all event models handle this correctly (neither POE nor IO::Async do,
		471	see their AnyEvent::Impl manpages for details), but even for event models
347	event models that I<do> handle this correctly, they usually need to be	472	that I<do> handle this correctly, they usually need to be loaded before
348	loaded before the process exits (i.e. before you fork in the first place).	473	the process exits (i.e. before you fork in the first place). AnyEvent's
		474	pure perl event loop handles all cases correctly regardless of when you
		475	start the watcher.
349		476
350	This means you cannot create a child watcher as the very first thing in an	477	This means you cannot create a child watcher as the very first
351	AnyEvent program, you I<have> to create at least one watcher before you	478	thing in an AnyEvent program, you I<have> to create at least one
352	C<fork> the child (alternatively, you can call C<AnyEvent::detect>).	479	watcher before you C<fork> the child (alternatively, you can call
		480	C<AnyEvent::detect>).
		481
		482	As most event loops do not support waiting for child events, they will be
		483	emulated by AnyEvent in most cases, in which the latency and race problems
		484	mentioned in the description of signal watchers apply.
353		485
354	Example: fork a process and wait for it	486	Example: fork a process and wait for it
355		487
356	my $done = AnyEvent->condvar;	488	my $done = AnyEvent->condvar;
357		489
…		…
367	);	499	);
368		500
369	# do something else, then wait for process exit	501	# do something else, then wait for process exit
370	$done->recv;	502	$done->recv;
371		503
		504	=head2 IDLE WATCHERS
		505
		506	$w = AnyEvent->idle (cb => <callback>);
		507
		508	Repeatedly invoke the callback after the process becomes idle, until
		509	either the watcher is destroyed or new events have been detected.
		510
		511	Idle watchers are useful when there is a need to do something, but it
		512	is not so important (or wise) to do it instantly. The callback will be
		513	invoked only when there is "nothing better to do", which is usually
		514	defined as "all outstanding events have been handled and no new events
		515	have been detected". That means that idle watchers ideally get invoked
		516	when the event loop has just polled for new events but none have been
		517	detected. Instead of blocking to wait for more events, the idle watchers
		518	will be invoked.
		519
		520	Unfortunately, most event loops do not really support idle watchers (only
		521	EV, Event and Glib do it in a usable fashion) - for the rest, AnyEvent
		522	will simply call the callback "from time to time".
		523
		524	Example: read lines from STDIN, but only process them when the
		525	program is otherwise idle:
		526
		527	my @lines; # read data
		528	my $idle_w;
		529	my $io_w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {
		530	push @lines, scalar <STDIN>;
		531
		532	# start an idle watcher, if not already done
		533	$idle_w ||= AnyEvent->idle (cb => sub {
		534	# handle only one line, when there are lines left
		535	if (my $line = shift @lines) {
		536	print "handled when idle: $line";
		537	} else {
		538	# otherwise disable the idle watcher again
		539	undef $idle_w;
		540	}
		541	});
		542	});
		543
372	=head2 CONDITION VARIABLES	544	=head2 CONDITION VARIABLES
		545
		546	$cv = AnyEvent->condvar;
		547
		548	$cv->send (<list>);
		549	my @res = $cv->recv;
373		550
374	If you are familiar with some event loops you will know that all of them	551	If you are familiar with some event loops you will know that all of them
375	require you to run some blocking "loop", "run" or similar function that	552	require you to run some blocking "loop", "run" or similar function that
376	will actively watch for new events and call your callbacks.	553	will actively watch for new events and call your callbacks.
377		554
378	AnyEvent is different, it expects somebody else to run the event loop and	555	AnyEvent is slightly different: it expects somebody else to run the event
379	will only block when necessary (usually when told by the user).	556	loop and will only block when necessary (usually when told by the user).
380		557
381	The instrument to do that is called a "condition variable", so called	558	The instrument to do that is called a "condition variable", so called
382	because they represent a condition that must become true.	559	because they represent a condition that must become true.
		560
		561	Now is probably a good time to look at the examples further below.
383		562
384	Condition variables can be created by calling the C<< AnyEvent->condvar	563	Condition variables can be created by calling the C<< AnyEvent->condvar
385	>> method, usually without arguments. The only argument pair allowed is	564	>> method, usually without arguments. The only argument pair allowed is
386	C<cb>, which specifies a callback to be called when the condition variable	565	C<cb>, which specifies a callback to be called when the condition variable
387	becomes true.	566	becomes true, with the condition variable as the first argument (but not
		567	the results).
388		568
389	After creation, the condition variable is "false" until it becomes "true"	569	After creation, the condition variable is "false" until it becomes "true"
390	by calling the C<send> method (or calling the condition variable as if it	570	by calling the C<send> method (or calling the condition variable as if it
391	were a callback, read about the caveats in the description for the C<<	571	were a callback, read about the caveats in the description for the C<<
392	->send >> method).	572	->send >> method).
…		…
394	Condition variables are similar to callbacks, except that you can	574	Condition variables are similar to callbacks, except that you can
395	optionally wait for them. They can also be called merge points - points	575	optionally wait for them. They can also be called merge points - points
396	in time where multiple outstanding events have been processed. And yet	576	in time where multiple outstanding events have been processed. And yet
397	another way to call them is transactions - each condition variable can be	577	another way to call them is transactions - each condition variable can be
398	used to represent a transaction, which finishes at some point and delivers	578	used to represent a transaction, which finishes at some point and delivers
399	a result.	579	a result. And yet some people know them as "futures" - a promise to
		580	compute/deliver something that you can wait for.
400		581
401	Condition variables are very useful to signal that something has finished,	582	Condition variables are very useful to signal that something has finished,
402	for example, if you write a module that does asynchronous http requests,	583	for example, if you write a module that does asynchronous http requests,
403	then a condition variable would be the ideal candidate to signal the	584	then a condition variable would be the ideal candidate to signal the
404	availability of results. The user can either act when the callback is	585	availability of results. The user can either act when the callback is
…		…
438	after => 1,	619	after => 1,
439	cb => sub { $result_ready->send },	620	cb => sub { $result_ready->send },
440	);	621	);
441		622
442	# this "blocks" (while handling events) till the callback	623	# this "blocks" (while handling events) till the callback
443	# calls send	624	# calls ->send
444	$result_ready->recv;	625	$result_ready->recv;
445		626
446	Example: wait for a timer, but take advantage of the fact that	627	Example: wait for a timer, but take advantage of the fact that condition
447	condition variables are also code references.	628	variables are also callable directly.
448		629
449	my $done = AnyEvent->condvar;	630	my $done = AnyEvent->condvar;
450	my $delay = AnyEvent->timer (after => 5, cb => $done);	631	my $delay = AnyEvent->timer (after => 5, cb => $done);
451	$done->recv;	632	$done->recv;
		633
		634	Example: Imagine an API that returns a condvar and doesn't support
		635	callbacks. This is how you make a synchronous call, for example from
		636	the main program:
		637
		638	use AnyEvent::CouchDB;
		639
		640	...
		641
		642	my @info = $couchdb->info->recv;
		643
		644	And this is how you would just set a callback to be called whenever the
		645	results are available:
		646
		647	$couchdb->info->cb (sub {
		648	my @info = $_[0]->recv;
		649	});
452		650
453	=head3 METHODS FOR PRODUCERS	651	=head3 METHODS FOR PRODUCERS
454		652
455	These methods should only be used by the producing side, i.e. the	653	These methods should only be used by the producing side, i.e. the
456	code/module that eventually sends the signal. Note that it is also	654	code/module that eventually sends the signal. Note that it is also
…		…
469	immediately from within send.	667	immediately from within send.
470		668
471	Any arguments passed to the C<send> call will be returned by all	669	Any arguments passed to the C<send> call will be returned by all
472	future C<< ->recv >> calls.	670	future C<< ->recv >> calls.
473		671
474	Condition variables are overloaded so one can call them directly	672	Condition variables are overloaded so one can call them directly (as if
475	(as a code reference). Calling them directly is the same as calling	673	they were a code reference). Calling them directly is the same as calling
476	C<send>. Note, however, that many C-based event loops do not handle	674	C<send>.
477	overloading, so as tempting as it may be, passing a condition variable
478	instead of a callback does not work. Both the pure perl and EV loops
479	support overloading, however, as well as all functions that use perl to
480	invoke a callback (as in L<AnyEvent::Socket> and L<AnyEvent::DNS> for
481	example).
482		675
483	=item $cv->croak ($error)	676	=item $cv->croak ($error)
484		677
485	Similar to send, but causes all call's to C<< ->recv >> to invoke	678	Similar to send, but causes all call's to C<< ->recv >> to invoke
486	C<Carp::croak> with the given error message/object/scalar.	679	C<Carp::croak> with the given error message/object/scalar.
487		680
488	This can be used to signal any errors to the condition variable	681	This can be used to signal any errors to the condition variable
489	user/consumer.	682	user/consumer. Doing it this way instead of calling C<croak> directly
		683	delays the error detetcion, but has the overwhelmign advantage that it
		684	diagnoses the error at the place where the result is expected, and not
		685	deep in some event clalback without connection to the actual code causing
		686	the problem.
490		687
491	=item $cv->begin ([group callback])	688	=item $cv->begin ([group callback])
492		689
493	=item $cv->end	690	=item $cv->end
494
495	These two methods are EXPERIMENTAL and MIGHT CHANGE.
496		691
497	These two methods can be used to combine many transactions/events into	692	These two methods can be used to combine many transactions/events into
498	one. For example, a function that pings many hosts in parallel might want	693	one. For example, a function that pings many hosts in parallel might want
499	to use a condition variable for the whole process.	694	to use a condition variable for the whole process.
500		695
501	Every call to C<< ->begin >> will increment a counter, and every call to	696	Every call to C<< ->begin >> will increment a counter, and every call to
502	C<< ->end >> will decrement it. If the counter reaches C<0> in C<< ->end	697	C<< ->end >> will decrement it. If the counter reaches C<0> in C<< ->end
503	>>, the (last) callback passed to C<begin> will be executed. That callback	698	>>, the (last) callback passed to C<begin> will be executed, passing the
504	is I<supposed> to call C<< ->send >>, but that is not required. If no	699	condvar as first argument. That callback is I<supposed> to call C<< ->send
505	callback was set, C<send> will be called without any arguments.	700	>>, but that is not required. If no group callback was set, C<send> will
		701	be called without any arguments.
506		702
507	Let's clarify this with the ping example:	703	You can think of C<< $cv->send >> giving you an OR condition (one call
		704	sends), while C<< $cv->begin >> and C<< $cv->end >> giving you an AND
		705	condition (all C<begin> calls must be C<end>'ed before the condvar sends).
		706
		707	Let's start with a simple example: you have two I/O watchers (for example,
		708	STDOUT and STDERR for a program), and you want to wait for both streams to
		709	close before activating a condvar:
508		710
509	my $cv = AnyEvent->condvar;	711	my $cv = AnyEvent->condvar;
510		712
		713	$cv->begin; # first watcher
		714	my $w1 = AnyEvent->io (fh => $fh1, cb => sub {
		715	defined sysread $fh1, my $buf, 4096
		716	or $cv->end;
		717	});
		718
		719	$cv->begin; # second watcher
		720	my $w2 = AnyEvent->io (fh => $fh2, cb => sub {
		721	defined sysread $fh2, my $buf, 4096
		722	or $cv->end;
		723	});
		724
		725	$cv->recv;
		726
		727	This works because for every event source (EOF on file handle), there is
		728	one call to C<begin>, so the condvar waits for all calls to C<end> before
		729	sending.
		730
		731	The ping example mentioned above is slightly more complicated, as the
		732	there are results to be passwd back, and the number of tasks that are
		733	begung can potentially be zero:
		734
		735	my $cv = AnyEvent->condvar;
		736
511	my %result;	737	my %result;
512	$cv->begin (sub { $cv->send (\%result) });	738	$cv->begin (sub { shift->send (\%result) });
513		739
514	for my $host (@list_of_hosts) {	740	for my $host (@list_of_hosts) {
515	$cv->begin;	741	$cv->begin;
516	ping_host_then_call_callback $host, sub {	742	ping_host_then_call_callback $host, sub {
517	$result{$host} = ...;	743	$result{$host} = ...;
…		…
532	loop, which serves two important purposes: first, it sets the callback	758	loop, which serves two important purposes: first, it sets the callback
533	to be called once the counter reaches C<0>, and second, it ensures that	759	to be called once the counter reaches C<0>, and second, it ensures that
534	C<send> is called even when C<no> hosts are being pinged (the loop	760	C<send> is called even when C<no> hosts are being pinged (the loop
535	doesn't execute once).	761	doesn't execute once).
536		762
537	This is the general pattern when you "fan out" into multiple subrequests:	763	This is the general pattern when you "fan out" into multiple (but
538	use an outer C<begin>/C<end> pair to set the callback and ensure C<end>	764	potentially none) subrequests: use an outer C<begin>/C<end> pair to set
539	is called at least once, and then, for each subrequest you start, call	765	the callback and ensure C<end> is called at least once, and then, for each
540	C<begin> and for each subrequest you finish, call C<end>.	766	subrequest you start, call C<begin> and for each subrequest you finish,
		767	call C<end>.
541		768
542	=back	769	=back
543		770
544	=head3 METHODS FOR CONSUMERS	771	=head3 METHODS FOR CONSUMERS
545		772
…		…
561	function will call C<croak>.	788	function will call C<croak>.
562		789
563	In list context, all parameters passed to C<send> will be returned,	790	In list context, all parameters passed to C<send> will be returned,
564	in scalar context only the first one will be returned.	791	in scalar context only the first one will be returned.
565		792
		793	Note that doing a blocking wait in a callback is not supported by any
		794	event loop, that is, recursive invocation of a blocking C<< ->recv
		795	>> is not allowed, and the C<recv> call will C<croak> if such a
		796	condition is detected. This condition can be slightly loosened by using
		797	L<Coro::AnyEvent>, which allows you to do a blocking C<< ->recv >> from
		798	any thread that doesn't run the event loop itself.
		799
566	Not all event models support a blocking wait - some die in that case	800	Not all event models support a blocking wait - some die in that case
567	(programs might want to do that to stay interactive), so I<if you are	801	(programs might want to do that to stay interactive), so I<if you are
568	using this from a module, never require a blocking wait>, but let the	802	using this from a module, never require a blocking wait>. Instead, let the
569	caller decide whether the call will block or not (for example, by coupling	803	caller decide whether the call will block or not (for example, by coupling
570	condition variables with some kind of request results and supporting	804	condition variables with some kind of request results and supporting
571	callbacks so the caller knows that getting the result will not block,	805	callbacks so the caller knows that getting the result will not block,
572	while still supporting blocking waits if the caller so desires).	806	while still supporting blocking waits if the caller so desires).
573		807
574	Another reason I<never> to C<< ->recv >> in a module is that you cannot
575	sensibly have two C<< ->recv >>'s in parallel, as that would require
576	multiple interpreters or coroutines/threads, none of which C<AnyEvent>
577	can supply.
578
579	The L<Coro> module, however, I<can> and I<does> supply coroutines and, in
580	fact, L<Coro::AnyEvent> replaces AnyEvent's condvars by coroutine-safe
581	versions and also integrates coroutines into AnyEvent, making blocking
582	C<< ->recv >> calls perfectly safe as long as they are done from another
583	coroutine (one that doesn't run the event loop).
584
585	You can ensure that C<< -recv >> never blocks by setting a callback and	808	You can ensure that C<< -recv >> never blocks by setting a callback and
586	only calling C<< ->recv >> from within that callback (or at a later	809	only calling C<< ->recv >> from within that callback (or at a later
587	time). This will work even when the event loop does not support blocking	810	time). This will work even when the event loop does not support blocking
588	waits otherwise.	811	waits otherwise.
589		812
590	=item $bool = $cv->ready	813	=item $bool = $cv->ready
591		814
592	Returns true when the condition is "true", i.e. whether C<send> or	815	Returns true when the condition is "true", i.e. whether C<send> or
593	C<croak> have been called.	816	C<croak> have been called.
594		817
595	=item $cb = $cv->cb ([new callback])	818	=item $cb = $cv->cb ($cb->($cv))
596		819
597	This is a mutator function that returns the callback set and optionally	820	This is a mutator function that returns the callback set and optionally
598	replaces it before doing so.	821	replaces it before doing so.
599		822
600	The callback will be called when the condition becomes "true", i.e. when	823	The callback will be called when the condition becomes (or already was)
601	C<send> or C<croak> are called, with the only argument being the condition	824	"true", i.e. when C<send> or C<croak> are called (or were called), with
602	variable itself. Calling C<recv> inside the callback or at any later time	825	the only argument being the condition variable itself. Calling C<recv>
603	is guaranteed not to block.	826	inside the callback or at any later time is guaranteed not to block.
604		827
605	=back	828	=back
606		829
		830	=head1 SUPPORTED EVENT LOOPS/BACKENDS
		831
		832	The available backend classes are (every class has its own manpage):
		833
		834	=over 4
		835
		836	=item Backends that are autoprobed when no other event loop can be found.
		837
		838	EV is the preferred backend when no other event loop seems to be in
		839	use. If EV is not installed, then AnyEvent will fall back to its own
		840	pure-perl implementation, which is available everywhere as it comes with
		841	AnyEvent itself.
		842
		843	AnyEvent::Impl::EV based on EV (interface to libev, best choice).
		844	AnyEvent::Impl::Perl pure-perl implementation, fast and portable.
		845
		846	=item Backends that are transparently being picked up when they are used.
		847
		848	These will be used when they are currently loaded when the first watcher
		849	is created, in which case it is assumed that the application is using
		850	them. This means that AnyEvent will automatically pick the right backend
		851	when the main program loads an event module before anything starts to
		852	create watchers. Nothing special needs to be done by the main program.
		853
		854	AnyEvent::Impl::Event based on Event, very stable, few glitches.
		855	AnyEvent::Impl::Glib based on Glib, slow but very stable.
		856	AnyEvent::Impl::Tk based on Tk, very broken.
		857	AnyEvent::Impl::EventLib based on Event::Lib, leaks memory and worse.
		858	AnyEvent::Impl::POE based on POE, very slow, some limitations.
		859	AnyEvent::Impl::Irssi used when running within irssi.
		860
		861	=item Backends with special needs.
		862
		863	Qt requires the Qt::Application to be instantiated first, but will
		864	otherwise be picked up automatically. As long as the main program
		865	instantiates the application before any AnyEvent watchers are created,
		866	everything should just work.
		867
		868	AnyEvent::Impl::Qt based on Qt.
		869
		870	Support for IO::Async can only be partial, as it is too broken and
		871	architecturally limited to even support the AnyEvent API. It also
		872	is the only event loop that needs the loop to be set explicitly, so
		873	it can only be used by a main program knowing about AnyEvent. See
		874	L<AnyEvent::Impl::Async> for the gory details.
		875
		876	AnyEvent::Impl::IOAsync based on IO::Async, cannot be autoprobed.
		877
		878	=item Event loops that are indirectly supported via other backends.
		879
		880	Some event loops can be supported via other modules:
		881
		882	There is no direct support for WxWidgets (L<Wx>) or L<Prima>.
		883
		884	B<WxWidgets> has no support for watching file handles. However, you can
		885	use WxWidgets through the POE adaptor, as POE has a Wx backend that simply
		886	polls 20 times per second, which was considered to be too horrible to even
		887	consider for AnyEvent.
		888
		889	B<Prima> is not supported as nobody seems to be using it, but it has a POE
		890	backend, so it can be supported through POE.
		891
		892	AnyEvent knows about both L<Prima> and L<Wx>, however, and will try to
		893	load L<POE> when detecting them, in the hope that POE will pick them up,
		894	in which case everything will be automatic.
		895
		896	=back
		897
607	=head1 GLOBAL VARIABLES AND FUNCTIONS	898	=head1 GLOBAL VARIABLES AND FUNCTIONS
608		899
		900	These are not normally required to use AnyEvent, but can be useful to
		901	write AnyEvent extension modules.
		902
609	=over 4	903	=over 4
610		904
611	=item $AnyEvent::MODEL	905	=item $AnyEvent::MODEL
612		906
613	Contains C<undef> until the first watcher is being created. Then it	907	Contains C<undef> until the first watcher is being created, before the
		908	backend has been autodetected.
		909
614	contains the event model that is being used, which is the name of the	910	Afterwards it contains the event model that is being used, which is the
615	Perl class implementing the model. This class is usually one of the	911	name of the Perl class implementing the model. This class is usually one
616	C<AnyEvent::Impl:xxx> modules, but can be any other class in the case	912	of the C<AnyEvent::Impl:xxx> modules, but can be any other class in the
617	AnyEvent has been extended at runtime (e.g. in I<rxvt-unicode>).	913	case AnyEvent has been extended at runtime (e.g. in I<rxvt-unicode> it
618		914	will be C<urxvt::anyevent>).
619	The known classes so far are:
620
621	AnyEvent::Impl::EV based on EV (an interface to libev, best choice).
622	AnyEvent::Impl::Event based on Event, second best choice.
623	AnyEvent::Impl::Perl pure-perl implementation, fast and portable.
624	AnyEvent::Impl::Glib based on Glib, third-best choice.
625	AnyEvent::Impl::Tk based on Tk, very bad choice.
626	AnyEvent::Impl::Qt based on Qt, cannot be autoprobed (see its docs).
627	AnyEvent::Impl::EventLib based on Event::Lib, leaks memory and worse.
628	AnyEvent::Impl::POE based on POE, not generic enough for full support.
629
630	There is no support for WxWidgets, as WxWidgets has no support for
631	watching file handles. However, you can use WxWidgets through the
632	POE Adaptor, as POE has a Wx backend that simply polls 20 times per
633	second, which was considered to be too horrible to even consider for
634	AnyEvent. Likewise, other POE backends can be used by AnyEvent by using
635	it's adaptor.
636
637	AnyEvent knows about L<Prima> and L<Wx> and will try to use L<POE> when
638	autodetecting them.
639		915
640	=item AnyEvent::detect	916	=item AnyEvent::detect
641		917
642	Returns C<$AnyEvent::MODEL>, forcing autodetection of the event model	918	Returns C<$AnyEvent::MODEL>, forcing autodetection of the event model
643	if necessary. You should only call this function right before you would	919	if necessary. You should only call this function right before you would
644	have created an AnyEvent watcher anyway, that is, as late as possible at	920	have created an AnyEvent watcher anyway, that is, as late as possible at
645	runtime.	921	runtime, and not e.g. while initialising of your module.
		922
		923	If you need to do some initialisation before AnyEvent watchers are
		924	created, use C<post_detect>.
646		925
647	=item $guard = AnyEvent::post_detect { BLOCK }	926	=item $guard = AnyEvent::post_detect { BLOCK }
648		927
649	Arranges for the code block to be executed as soon as the event model is	928	Arranges for the code block to be executed as soon as the event model is
650	autodetected (or immediately if this has already happened).	929	autodetected (or immediately if this has already happened).
651		930
		931	The block will be executed I<after> the actual backend has been detected
		932	(C<$AnyEvent::MODEL> is set), but I<before> any watchers have been
		933	created, so it is possible to e.g. patch C<@AnyEvent::ISA> or do
		934	other initialisations - see the sources of L<AnyEvent::Strict> or
		935	L<AnyEvent::AIO> to see how this is used.
		936
		937	The most common usage is to create some global watchers, without forcing
		938	event module detection too early, for example, L<AnyEvent::AIO> creates
		939	and installs the global L<IO::AIO> watcher in a C<post_detect> block to
		940	avoid autodetecting the event module at load time.
		941
652	If called in scalar or list context, then it creates and returns an object	942	If called in scalar or list context, then it creates and returns an object
653	that automatically removes the callback again when it is destroyed. See	943	that automatically removes the callback again when it is destroyed (or
		944	C<undef> when the hook was immediately executed). See L<AnyEvent::AIO> for
654	L<Coro::BDB> for a case where this is useful.	945	a case where this is useful.
		946
		947	Example: Create a watcher for the IO::AIO module and store it in
		948	C<$WATCHER>. Only do so after the event loop is initialised, though.
		949
		950	our WATCHER;
		951
		952	my $guard = AnyEvent::post_detect {
		953	$WATCHER = AnyEvent->io (fh => IO::AIO::poll_fileno, poll => 'r', cb => \&IO::AIO::poll_cb);
		954	};
		955
		956	# the ||= is important in case post_detect immediately runs the block,
		957	# as to not clobber the newly-created watcher. assigning both watcher and
		958	# post_detect guard to the same variable has the advantage of users being
		959	# able to just C<undef $WATCHER> if the watcher causes them grief.
		960
		961	$WATCHER ||= $guard;
655		962
656	=item @AnyEvent::post_detect	963	=item @AnyEvent::post_detect
657		964
658	If there are any code references in this array (you can C<push> to it	965	If there are any code references in this array (you can C<push> to it
659	before or after loading AnyEvent), then they will called directly after	966	before or after loading AnyEvent), then they will called directly after
660	the event loop has been chosen.	967	the event loop has been chosen.
661		968
662	You should check C<$AnyEvent::MODEL> before adding to this array, though:	969	You should check C<$AnyEvent::MODEL> before adding to this array, though:
663	if it contains a true value then the event loop has already been detected,	970	if it is defined then the event loop has already been detected, and the
664	and the array will be ignored.	971	array will be ignored.
665		972
666	Best use C<AnyEvent::post_detect { BLOCK }> instead.	973	Best use C<AnyEvent::post_detect { BLOCK }> when your application allows
		974	it, as it takes care of these details.
		975
		976	This variable is mainly useful for modules that can do something useful
		977	when AnyEvent is used and thus want to know when it is initialised, but do
		978	not need to even load it by default. This array provides the means to hook
		979	into AnyEvent passively, without loading it.
		980
		981	Example: To load Coro::AnyEvent whenever Coro and AnyEvent are used
		982	together, you could put this into Coro (this is the actual code used by
		983	Coro to accomplish this):
		984
		985	if (defined $AnyEvent::MODEL) {
		986	# AnyEvent already initialised, so load Coro::AnyEvent
		987	require Coro::AnyEvent;
		988	} else {
		989	# AnyEvent not yet initialised, so make sure to load Coro::AnyEvent
		990	# as soon as it is
		991	push @AnyEvent::post_detect, sub { require Coro::AnyEvent };
		992	}
667		993
668	=back	994	=back
669		995
670	=head1 WHAT TO DO IN A MODULE	996	=head1 WHAT TO DO IN A MODULE
671		997
…		…
726		1052
727		1053
728	=head1 OTHER MODULES	1054	=head1 OTHER MODULES
729		1055
730	The following is a non-exhaustive list of additional modules that use	1056	The following is a non-exhaustive list of additional modules that use
731	AnyEvent and can therefore be mixed easily with other AnyEvent modules	1057	AnyEvent as a client and can therefore be mixed easily with other AnyEvent
732	in the same program. Some of the modules come with AnyEvent, some are	1058	modules and other event loops in the same program. Some of the modules
733	available via CPAN.	1059	come with AnyEvent, most are available via CPAN.
734		1060
735	=over 4	1061	=over 4
736		1062
737	=item L<AnyEvent::Util>	1063	=item L<AnyEvent::Util>
738		1064
…		…
747		1073
748	=item L<AnyEvent::Handle>	1074	=item L<AnyEvent::Handle>
749		1075
750	Provide read and write buffers, manages watchers for reads and writes,	1076	Provide read and write buffers, manages watchers for reads and writes,
751	supports raw and formatted I/O, I/O queued and fully transparent and	1077	supports raw and formatted I/O, I/O queued and fully transparent and
752	non-blocking SSL/TLS.	1078	non-blocking SSL/TLS (via L<AnyEvent::TLS>.
753		1079
754	=item L<AnyEvent::DNS>	1080	=item L<AnyEvent::DNS>
755		1081
756	Provides rich asynchronous DNS resolver capabilities.	1082	Provides rich asynchronous DNS resolver capabilities.
757		1083
…		…
785		1111
786	=item L<AnyEvent::GPSD>	1112	=item L<AnyEvent::GPSD>
787		1113
788	A non-blocking interface to gpsd, a daemon delivering GPS information.	1114	A non-blocking interface to gpsd, a daemon delivering GPS information.
789		1115
		1116	=item L<AnyEvent::IRC>
		1117
		1118	AnyEvent based IRC client module family (replacing the older Net::IRC3).
		1119
		1120	=item L<AnyEvent::XMPP>
		1121
		1122	AnyEvent based XMPP (Jabber protocol) module family (replacing the older
		1123	Net::XMPP2>.
		1124
790	=item L<AnyEvent::IGS>	1125	=item L<AnyEvent::IGS>
791		1126
792	A non-blocking interface to the Internet Go Server protocol (used by	1127	A non-blocking interface to the Internet Go Server protocol (used by
793	L<App::IGS>).	1128	L<App::IGS>).
794		1129
795	=item L<Net::IRC3>
796
797	AnyEvent based IRC client module family.
798
799	=item L<Net::XMPP2>
800
801	AnyEvent based XMPP (Jabber protocol) module family.
802
803	=item L<Net::FCP>	1130	=item L<Net::FCP>
804		1131
805	AnyEvent-based implementation of the Freenet Client Protocol, birthplace	1132	AnyEvent-based implementation of the Freenet Client Protocol, birthplace
806	of AnyEvent.	1133	of AnyEvent.
807		1134
…		…
811		1138
812	=item L<Coro>	1139	=item L<Coro>
813		1140
814	Has special support for AnyEvent via L<Coro::AnyEvent>.	1141	Has special support for AnyEvent via L<Coro::AnyEvent>.
815		1142
816	=item L<IO::Lambda>
817
818	The lambda approach to I/O - don't ask, look there. Can use AnyEvent.
819
820	=back	1143	=back
821		1144
822	=cut	1145	=cut
823		1146
824	package AnyEvent;	1147	package AnyEvent;
825		1148
826	no warnings;	1149	# basically a tuned-down version of common::sense
827	use strict;	1150	sub common_sense {
		1151	# from common:.sense 1.0
		1152	${^WARNING_BITS} = "\xfc\x3f\x33\x00\x0f\xf3\xcf\xc0\xf3\xfc\x33\x00";
		1153	# use strict vars subs - NO UTF-8, as Util.pm doesn't like this atm. (uts46data.pl)
		1154	$^H |= 0x00000600;
		1155	}
828		1156
		1157	BEGIN { AnyEvent::common_sense }
		1158
829	use Carp;	1159	use Carp ();
830		1160
831	our $VERSION = 4.21;	1161	our $VERSION = '5.23';
832	our $MODEL;	1162	our $MODEL;
833		1163
834	our $AUTOLOAD;	1164	our $AUTOLOAD;
835	our @ISA;	1165	our @ISA;
836		1166
837	our @REGISTRY;	1167	our @REGISTRY;
838		1168
839	our $WIN32;	1169	our $VERBOSE;
840		1170
841	BEGIN {	1171	BEGIN {
842	my $win32 = ! ! ($^O =~ /mswin32/i);	1172	eval "sub WIN32(){ " . (($^O =~ /mswin32/i)*1) ." }";
843	eval "sub WIN32(){ $win32 }";	1173	eval "sub TAINT(){ " . (${^TAINT}*1) . " }";
844	}
845		1174
		1175	delete @ENV{grep /^PERL_ANYEVENT_/, keys %ENV}
		1176	if ${^TAINT};
		1177
846	our $verbose = $ENV{PERL_ANYEVENT_VERBOSE}*1;	1178	$VERBOSE = $ENV{PERL_ANYEVENT_VERBOSE}*1;
		1179
		1180	}
		1181
		1182	our $MAX_SIGNAL_LATENCY = 10;
847		1183
848	our %PROTOCOL; # (ipv4|ipv6) => (1|2), higher numbers are preferred	1184	our %PROTOCOL; # (ipv4|ipv6) => (1|2), higher numbers are preferred
849		1185
850	{	1186	{
851	my $idx;	1187	my $idx;
…		…
853	for reverse split /\s*,\s*/,	1189	for reverse split /\s*,\s*/,
854	$ENV{PERL_ANYEVENT_PROTOCOLS} || "ipv4,ipv6";	1190	$ENV{PERL_ANYEVENT_PROTOCOLS} || "ipv4,ipv6";
855	}	1191	}
856		1192
857	my @models = (	1193	my @models = (
858	[EV:: => AnyEvent::Impl::EV::],	1194	[EV:: => AnyEvent::Impl::EV:: , 1],
859	[Event:: => AnyEvent::Impl::Event::],
860	[AnyEvent::Impl::Perl:: => AnyEvent::Impl::Perl::],	1195	[AnyEvent::Impl::Perl:: => AnyEvent::Impl::Perl:: , 1],
861	# everything below here will not be autoprobed	1196	# everything below here will not (normally) be autoprobed
862	# as the pureperl backend should work everywhere	1197	# as the pureperl backend should work everywhere
863	# and is usually faster	1198	# and is usually faster
		1199	[Event:: => AnyEvent::Impl::Event::, 1],
		1200	[Glib:: => AnyEvent::Impl::Glib:: , 1], # becomes extremely slow with many watchers
		1201	[Event::Lib:: => AnyEvent::Impl::EventLib::], # too buggy
		1202	[Irssi:: => AnyEvent::Impl::Irssi::], # Irssi has a bogus "Event" package
864	[Tk:: => AnyEvent::Impl::Tk::], # crashes with many handles	1203	[Tk:: => AnyEvent::Impl::Tk::], # crashes with many handles
865	[Glib:: => AnyEvent::Impl::Glib::], # becomes extremely slow with many watchers
866	[Event::Lib:: => AnyEvent::Impl::EventLib::], # too buggy
867	[Qt:: => AnyEvent::Impl::Qt::], # requires special main program	1204	[Qt:: => AnyEvent::Impl::Qt::], # requires special main program
868	[POE::Kernel:: => AnyEvent::Impl::POE::], # lasciate ogni speranza	1205	[POE::Kernel:: => AnyEvent::Impl::POE::], # lasciate ogni speranza
869	[Wx:: => AnyEvent::Impl::POE::],	1206	[Wx:: => AnyEvent::Impl::POE::],
870	[Prima:: => AnyEvent::Impl::POE::],	1207	[Prima:: => AnyEvent::Impl::POE::],
		1208	# IO::Async is just too broken - we would need workarounds for its
		1209	# byzantine signal and broken child handling, among others.
		1210	# IO::Async is rather hard to detect, as it doesn't have any
		1211	# obvious default class.
		1212	[IO::Async:: => AnyEvent::Impl::IOAsync::], # requires special main program
		1213	[IO::Async::Loop:: => AnyEvent::Impl::IOAsync::], # requires special main program
		1214	[IO::Async::Notifier:: => AnyEvent::Impl::IOAsync::], # requires special main program
		1215	[AnyEvent::Impl::IOAsync:: => AnyEvent::Impl::IOAsync::], # requires special main program
871	);	1216	);
872		1217
873	our %method = map +($_ => 1), qw(io timer time now signal child condvar one_event DESTROY);	1218	our %method = map +($_ => 1),
		1219	qw(io timer time now now_update signal child idle condvar one_event DESTROY);
874		1220
875	our @post_detect;	1221	our @post_detect;
876		1222
877	sub post_detect(&) {	1223	sub post_detect(&) {
878	my ($cb) = @_;	1224	my ($cb) = @_;
879		1225
880	if ($MODEL) {	1226	if ($MODEL) {
881	$cb->();	1227	$cb->();
882		1228
883	1	1229	undef
884	} else {	1230	} else {
885	push @post_detect, $cb;	1231	push @post_detect, $cb;
886		1232
887	defined wantarray	1233	defined wantarray
888	? bless \$cb, "AnyEvent::Util::PostDetect"	1234	? bless \$cb, "AnyEvent::Util::postdetect"
889	: ()	1235	: ()
890	}	1236	}
891	}	1237	}
892		1238
893	sub AnyEvent::Util::PostDetect::DESTROY {	1239	sub AnyEvent::Util::postdetect::DESTROY {
894	@post_detect = grep $_ != ${$_[0]}, @post_detect;	1240	@post_detect = grep $_ != ${$_[0]}, @post_detect;
895	}	1241	}
896		1242
897	sub detect() {	1243	sub detect() {
898	unless ($MODEL) {	1244	unless ($MODEL) {
899	no strict 'refs';
900	local $SIG{__DIE__};	1245	local $SIG{__DIE__};
901		1246
902	if ($ENV{PERL_ANYEVENT_MODEL} =~ /^([a-zA-Z]+)$/) {	1247	if ($ENV{PERL_ANYEVENT_MODEL} =~ /^([a-zA-Z]+)$/) {
903	my $model = "AnyEvent::Impl::$1";	1248	my $model = "AnyEvent::Impl::$1";
904	if (eval "require $model") {	1249	if (eval "require $model") {
905	$MODEL = $model;	1250	$MODEL = $model;
906	warn "AnyEvent: loaded model '$model' (forced by \$PERL_ANYEVENT_MODEL), using it.\n" if $verbose > 1;	1251	warn "AnyEvent: loaded model '$model' (forced by \$ENV{PERL_ANYEVENT_MODEL}), using it.\n" if $VERBOSE >= 2;
907	} else {	1252	} else {
908	warn "AnyEvent: unable to load model '$model' (from \$PERL_ANYEVENT_MODEL):\n$@" if $verbose;	1253	warn "AnyEvent: unable to load model '$model' (from \$ENV{PERL_ANYEVENT_MODEL}):\n$@" if $VERBOSE;
909	}	1254	}
910	}	1255	}
911		1256
912	# check for already loaded models	1257	# check for already loaded models
913	unless ($MODEL) {	1258	unless ($MODEL) {
914	for (@REGISTRY, @models) {	1259	for (@REGISTRY, @models) {
915	my ($package, $model) = @$_;	1260	my ($package, $model) = @$_;
916	if (${"$package\::VERSION"} > 0) {	1261	if (${"$package\::VERSION"} > 0) {
917	if (eval "require $model") {	1262	if (eval "require $model") {
918	$MODEL = $model;	1263	$MODEL = $model;
919	warn "AnyEvent: autodetected model '$model', using it.\n" if $verbose > 1;	1264	warn "AnyEvent: autodetected model '$model', using it.\n" if $VERBOSE >= 2;
920	last;	1265	last;
921	}	1266	}
922	}	1267	}
923	}	1268	}
924		1269
925	unless ($MODEL) {	1270	unless ($MODEL) {
926	# try to load a model	1271	# try to autoload a model
927
928	for (@REGISTRY, @models) {	1272	for (@REGISTRY, @models) {
929	my ($package, $model) = @$_;	1273	my ($package, $model, $autoload) = @$_;
		1274	if (
		1275	$autoload
930	if (eval "require $package"	1276	and eval "require $package"
931	and ${"$package\::VERSION"} > 0	1277	and ${"$package\::VERSION"} > 0
932	and eval "require $model") {	1278	and eval "require $model"
		1279	) {
933	$MODEL = $model;	1280	$MODEL = $model;
934	warn "AnyEvent: autoprobed model '$model', using it.\n" if $verbose > 1;	1281	warn "AnyEvent: autoloaded model '$model', using it.\n" if $VERBOSE >= 2;
935	last;	1282	last;
936	}	1283	}
937	}	1284	}
938		1285
939	$MODEL	1286	$MODEL
940	or die "No event module selected for AnyEvent and autodetect failed. Install any one of these modules: EV, Event or Glib.";	1287	or die "No event module selected for AnyEvent and autodetect failed. Install any one of these modules: EV, Event or Glib.\n";
941	}	1288	}
942	}	1289	}
943		1290
944	push @{"$MODEL\::ISA"}, "AnyEvent::Base";	1291	push @{"$MODEL\::ISA"}, "AnyEvent::Base";
945		1292
…		…
955		1302
956	sub AUTOLOAD {	1303	sub AUTOLOAD {
957	(my $func = $AUTOLOAD) =~ s/.*://;	1304	(my $func = $AUTOLOAD) =~ s/.*://;
958		1305
959	$method{$func}	1306	$method{$func}
960	or croak "$func: not a valid method for AnyEvent objects";	1307	or Carp::croak "$func: not a valid method for AnyEvent objects";
961		1308
962	detect unless $MODEL;	1309	detect unless $MODEL;
963		1310
964	my $class = shift;	1311	my $class = shift;
965	$class->$func (@_);	1312	$class->$func (@_);
966	}	1313	}
967		1314
968	# utility function to dup a filehandle. this is used by many backends	1315	# utility function to dup a filehandle. this is used by many backends
969	# to support binding more than one watcher per filehandle (they usually	1316	# to support binding more than one watcher per filehandle (they usually
970	# allow only one watcher per fd, so we dup it to get a different one).	1317	# allow only one watcher per fd, so we dup it to get a different one).
971	sub _dupfh($$$$) {	1318	sub _dupfh($$;$$) {
972	my ($poll, $fh, $r, $w) = @_;	1319	my ($poll, $fh, $r, $w) = @_;
973		1320
974	require Fcntl;
975
976	# cygwin requires the fh mode to be matching, unix doesn't	1321	# cygwin requires the fh mode to be matching, unix doesn't
977	my ($rw, $mode) = $poll eq "r" ? ($r, "<")	1322	my ($rw, $mode) = $poll eq "r" ? ($r, "<&") : ($w, ">&");
978	: $poll eq "w" ? ($w, ">")
979	: Carp::croak "AnyEvent->io requires poll set to either 'r' or 'w'";
980		1323
981	open my $fh2, "$mode&" . fileno $fh	1324	open my $fh2, $mode, $fh
982	or die "cannot dup() filehandle: $!";	1325	or die "AnyEvent->io: cannot dup() filehandle in mode '$poll': $!,";
983		1326
984	# we assume CLOEXEC is already set by perl in all important cases	1327	# we assume CLOEXEC is already set by perl in all important cases
985		1328
986	($fh2, $rw)	1329	($fh2, $rw)
987	}	1330	}
988		1331
		1332	=head1 SIMPLIFIED AE API
		1333
		1334	Starting with version 5.0, AnyEvent officially supports a second, much
		1335	simpler, API that is designed to reduce the calling, typing and memory
		1336	overhead.
		1337
		1338	See the L<AE> manpage for details.
		1339
		1340	=cut
		1341
		1342	package AE;
		1343
		1344	our $VERSION = $AnyEvent::VERSION;
		1345
		1346	sub io($$$) {
		1347	AnyEvent->io (fh => $_[0], poll => $_[1] ? "w" : "r", cb => $_[2])
		1348	}
		1349
		1350	sub timer($$$) {
		1351	AnyEvent->timer (after => $_[0], interval => $_[1], cb => $_[2])
		1352	}
		1353
		1354	sub signal($$) {
		1355	AnyEvent->signal (signal => $_[0], cb => $_[1])
		1356	}
		1357
		1358	sub child($$) {
		1359	AnyEvent->child (pid => $_[0], cb => $_[1])
		1360	}
		1361
		1362	sub idle($) {
		1363	AnyEvent->idle (cb => $_[0])
		1364	}
		1365
		1366	sub cv(;&) {
		1367	AnyEvent->condvar (@_ ? (cb => $_[0]) : ())
		1368	}
		1369
		1370	sub now() {
		1371	AnyEvent->now
		1372	}
		1373
		1374	sub now_update() {
		1375	AnyEvent->now_update
		1376	}
		1377
		1378	sub time() {
		1379	AnyEvent->time
		1380	}
		1381
989	package AnyEvent::Base;	1382	package AnyEvent::Base;
990		1383
991	# default implementation for now and time	1384	# default implementations for many methods
992		1385
993	use Time::HiRes ();	1386	sub _time() {
		1387	# probe for availability of Time::HiRes
		1388	if (eval "use Time::HiRes (); Time::HiRes::time (); 1") {
		1389	warn "AnyEvent: using Time::HiRes for sub-second timing accuracy.\n" if $VERBOSE >= 8;
		1390	*_time = \&Time::HiRes::time;
		1391	# if (eval "use POSIX (); (POSIX::times())...
		1392	} else {
		1393	warn "AnyEvent: using built-in time(), WARNING, no sub-second resolution!\n" if $VERBOSE;
		1394	*_time = sub { time }; # epic fail
		1395	}
994		1396
995	sub time { Time::HiRes::time }	1397	&_time
996	sub now { Time::HiRes::time }	1398	}
		1399
		1400	sub time { _time }
		1401	sub now { _time }
		1402	sub now_update { }
997		1403
998	# default implementation for ->condvar	1404	# default implementation for ->condvar
999		1405
1000	sub condvar {	1406	sub condvar {
1001	bless { @_ == 3 ? (_ae_cb => $_[2]) : () }, AnyEvent::CondVar::	1407	bless { @_ == 3 ? (_ae_cb => $_[2]) : () }, "AnyEvent::CondVar"
1002	}	1408	}
1003		1409
1004	# default implementation for ->signal	1410	# default implementation for ->signal
1005		1411
1006	our %SIG_CB;	1412	our $HAVE_ASYNC_INTERRUPT;
		1413
		1414	sub _have_async_interrupt() {
		1415	$HAVE_ASYNC_INTERRUPT = 1*(!$ENV{PERL_ANYEVENT_AVOID_ASYNC_INTERRUPT}
		1416	&& eval "use Async::Interrupt 1.02 (); 1")
		1417	unless defined $HAVE_ASYNC_INTERRUPT;
		1418
		1419	$HAVE_ASYNC_INTERRUPT
		1420	}
		1421
		1422	our ($SIGPIPE_R, $SIGPIPE_W, %SIG_CB, %SIG_EV, $SIG_IO);
		1423	our (%SIG_ASY, %SIG_ASY_W);
		1424	our ($SIG_COUNT, $SIG_TW);
		1425
		1426	sub _signal_exec {
		1427	$HAVE_ASYNC_INTERRUPT
		1428	? $SIGPIPE_R->drain
		1429	: sysread $SIGPIPE_R, (my $dummy), 9;
		1430
		1431	while (%SIG_EV) {
		1432	for (keys %SIG_EV) {
		1433	delete $SIG_EV{$_};
		1434	$_->() for values %{ $SIG_CB{$_} || {} };
		1435	}
		1436	}
		1437	}
		1438
		1439	# install a dummy wakeup watcher to reduce signal catching latency
		1440	sub _sig_add() {
		1441	unless ($SIG_COUNT++) {
		1442	# try to align timer on a full-second boundary, if possible
		1443	my $NOW = AE::now;
		1444
		1445	$SIG_TW = AE::timer
		1446	$MAX_SIGNAL_LATENCY - ($NOW - int $NOW),
		1447	$MAX_SIGNAL_LATENCY,
		1448	sub { } # just for the PERL_ASYNC_CHECK
		1449	;
		1450	}
		1451	}
		1452
		1453	sub _sig_del {
		1454	undef $SIG_TW
		1455	unless --$SIG_COUNT;
		1456	}
		1457
		1458	our $_sig_name_init; $_sig_name_init = sub {
		1459	eval q{ # poor man's autoloading
		1460	undef $_sig_name_init;
		1461
		1462	if (_have_async_interrupt) {
		1463	*sig2num = \&Async::Interrupt::sig2num;
		1464	*sig2name = \&Async::Interrupt::sig2name;
		1465	} else {
		1466	require Config;
		1467
		1468	my %signame2num;
		1469	@signame2num{ split ' ', $Config::Config{sig_name} }
		1470	= split ' ', $Config::Config{sig_num};
		1471
		1472	my @signum2name;
		1473	@signum2name[values %signame2num] = keys %signame2num;
		1474
		1475	*sig2num = sub($) {
		1476	$_[0] > 0 ? shift : $signame2num{+shift}
		1477	};
		1478	*sig2name = sub ($) {
		1479	$_[0] > 0 ? $signum2name[+shift] : shift
		1480	};
		1481	}
		1482	};
		1483	die if $@;
		1484	};
		1485
		1486	sub sig2num ($) { &$_sig_name_init; &sig2num }
		1487	sub sig2name($) { &$_sig_name_init; &sig2name }
1007		1488
1008	sub signal {	1489	sub signal {
		1490	eval q{ # poor man's autoloading {}
		1491	# probe for availability of Async::Interrupt
		1492	if (_have_async_interrupt) {
		1493	warn "AnyEvent: using Async::Interrupt for race-free signal handling.\n" if $VERBOSE >= 8;
		1494
		1495	$SIGPIPE_R = new Async::Interrupt::EventPipe;
		1496	$SIG_IO = AE::io $SIGPIPE_R->fileno, 0, \&_signal_exec;
		1497
		1498	} else {
		1499	warn "AnyEvent: using emulated perl signal handling with latency timer.\n" if $VERBOSE >= 8;
		1500
		1501	require Fcntl;
		1502
		1503	if (AnyEvent::WIN32) {
		1504	require AnyEvent::Util;
		1505
		1506	($SIGPIPE_R, $SIGPIPE_W) = AnyEvent::Util::portable_pipe ();
		1507	AnyEvent::Util::fh_nonblocking ($SIGPIPE_R, 1) if $SIGPIPE_R;
		1508	AnyEvent::Util::fh_nonblocking ($SIGPIPE_W, 1) if $SIGPIPE_W; # just in case
		1509	} else {
		1510	pipe $SIGPIPE_R, $SIGPIPE_W;
		1511	fcntl $SIGPIPE_R, &Fcntl::F_SETFL, &Fcntl::O_NONBLOCK if $SIGPIPE_R;
		1512	fcntl $SIGPIPE_W, &Fcntl::F_SETFL, &Fcntl::O_NONBLOCK if $SIGPIPE_W; # just in case
		1513
		1514	# not strictly required, as $^F is normally 2, but let's make sure...
		1515	fcntl $SIGPIPE_R, &Fcntl::F_SETFD, &Fcntl::FD_CLOEXEC;
		1516	fcntl $SIGPIPE_W, &Fcntl::F_SETFD, &Fcntl::FD_CLOEXEC;
		1517	}
		1518
		1519	$SIGPIPE_R
		1520	or Carp::croak "AnyEvent: unable to create a signal reporting pipe: $!\n";
		1521
		1522	$SIG_IO = AE::io $SIGPIPE_R, 0, \&_signal_exec;
		1523	}
		1524
		1525	*signal = sub {
1009	my (undef, %arg) = @_;	1526	my (undef, %arg) = @_;
1010		1527
1011	my $signal = uc $arg{signal}	1528	my $signal = uc $arg{signal}
1012	or Carp::croak "required option 'signal' is missing";	1529	or Carp::croak "required option 'signal' is missing";
1013		1530
		1531	if ($HAVE_ASYNC_INTERRUPT) {
		1532	# async::interrupt
		1533
		1534	$signal = sig2num $signal;
1014	$SIG_CB{$signal}{$arg{cb}} = $arg{cb};	1535	$SIG_CB{$signal}{$arg{cb}} = $arg{cb};
		1536
		1537	$SIG_ASY{$signal} ||= new Async::Interrupt
		1538	cb => sub { undef $SIG_EV{$signal} },
		1539	signal => $signal,
		1540	pipe => [$SIGPIPE_R->filenos],
		1541	pipe_autodrain => 0,
		1542	;
		1543
		1544	} else {
		1545	# pure perl
		1546
		1547	# AE::Util has been loaded in signal
		1548	$signal = sig2name $signal;
		1549	$SIG_CB{$signal}{$arg{cb}} = $arg{cb};
		1550
1015	$SIG{$signal} ||= sub {	1551	$SIG{$signal} ||= sub {
1016	$_->() for values %{ $SIG_CB{$signal} || {} };	1552	local $!;
		1553	syswrite $SIGPIPE_W, "\x00", 1 unless %SIG_EV;
		1554	undef $SIG_EV{$signal};
		1555	};
		1556
		1557	# can't do signal processing without introducing races in pure perl,
		1558	# so limit the signal latency.
		1559	_sig_add;
		1560	}
		1561
		1562	bless [$signal, $arg{cb}], "AnyEvent::Base::signal"
		1563	};
		1564
		1565	*AnyEvent::Base::signal::DESTROY = sub {
		1566	my ($signal, $cb) = @{$_[0]};
		1567
		1568	_sig_del;
		1569
		1570	delete $SIG_CB{$signal}{$cb};
		1571
		1572	$HAVE_ASYNC_INTERRUPT
		1573	? delete $SIG_ASY{$signal}
		1574	: # delete doesn't work with older perls - they then
		1575	# print weird messages, or just unconditionally exit
		1576	# instead of getting the default action.
		1577	undef $SIG{$signal}
		1578	unless keys %{ $SIG_CB{$signal} };
		1579	};
1017	};	1580	};
1018		1581	die if $@;
1019	bless [$signal, $arg{cb}], "AnyEvent::Base::Signal"	1582	&signal
1020	}
1021
1022	sub AnyEvent::Base::Signal::DESTROY {
1023	my ($signal, $cb) = @{$_[0]};
1024
1025	delete $SIG_CB{$signal}{$cb};
1026
1027	delete $SIG{$signal} unless keys %{ $SIG_CB{$signal} };
1028	}	1583	}
1029		1584
1030	# default implementation for ->child	1585	# default implementation for ->child
1031		1586
1032	our %PID_CB;	1587	our %PID_CB;
1033	our $CHLD_W;	1588	our $CHLD_W;
1034	our $CHLD_DELAY_W;	1589	our $CHLD_DELAY_W;
1035	our $PID_IDLE;
1036	our $WNOHANG;	1590	our $WNOHANG;
1037		1591
1038	sub _child_wait {	1592	sub _emit_childstatus($$) {
1039	while (0 < (my $pid = waitpid -1, $WNOHANG)) {	1593	my (undef, $rpid, $rstatus) = @_;
		1594
		1595	$_->($rpid, $rstatus)
1040	$_->($pid, $?) for (values %{ $PID_CB{$pid} || {} }),	1596	for values %{ $PID_CB{$rpid} || {} },
1041	(values %{ $PID_CB{0} || {} });	1597	values %{ $PID_CB{0} || {} };
1042	}
1043
1044	undef $PID_IDLE;
1045	}	1598	}
1046		1599
1047	sub _sigchld {	1600	sub _sigchld {
1048	# make sure we deliver these changes "synchronous" with the event loop.	1601	my $pid;
1049	$CHLD_DELAY_W ||= AnyEvent->timer (after => 0, cb => sub {	1602
1050	undef $CHLD_DELAY_W;	1603	AnyEvent->_emit_childstatus ($pid, $?)
1051	&_child_wait;	1604	while ($pid = waitpid -1, $WNOHANG) > 0;
1052	});
1053	}	1605	}
1054		1606
1055	sub child {	1607	sub child {
1056	my (undef, %arg) = @_;	1608	my (undef, %arg) = @_;
1057		1609
1058	defined (my $pid = $arg{pid} + 0)	1610	defined (my $pid = $arg{pid} + 0)
1059	or Carp::croak "required option 'pid' is missing";	1611	or Carp::croak "required option 'pid' is missing";
1060		1612
1061	$PID_CB{$pid}{$arg{cb}} = $arg{cb};	1613	$PID_CB{$pid}{$arg{cb}} = $arg{cb};
1062		1614
1063	unless ($WNOHANG) {	1615	# WNOHANG is almost cetrainly 1 everywhere
		1616	$WNOHANG ||= $^O =~ /^(?:openbsd|netbsd|linux|freebsd|cygwin|MSWin32)$/
		1617	? 1
1064	$WNOHANG = eval { local $SIG{__DIE__}; require POSIX; &POSIX::WNOHANG } || 1;	1618	: eval { local $SIG{__DIE__}; require POSIX; &POSIX::WNOHANG } || 1;
1065	}
1066		1619
1067	unless ($CHLD_W) {	1620	unless ($CHLD_W) {
1068	$CHLD_W = AnyEvent->signal (signal => 'CHLD', cb => \&_sigchld);	1621	$CHLD_W = AE::signal CHLD => \&_sigchld;
1069	# child could be a zombie already, so make at least one round	1622	# child could be a zombie already, so make at least one round
1070	&_sigchld;	1623	&_sigchld;
1071	}	1624	}
1072		1625
1073	bless [$pid, $arg{cb}], "AnyEvent::Base::Child"	1626	bless [$pid, $arg{cb}], "AnyEvent::Base::child"
1074	}	1627	}
1075		1628
1076	sub AnyEvent::Base::Child::DESTROY {	1629	sub AnyEvent::Base::child::DESTROY {
1077	my ($pid, $cb) = @{$_[0]};	1630	my ($pid, $cb) = @{$_[0]};
1078		1631
1079	delete $PID_CB{$pid}{$cb};	1632	delete $PID_CB{$pid}{$cb};
1080	delete $PID_CB{$pid} unless keys %{ $PID_CB{$pid} };	1633	delete $PID_CB{$pid} unless keys %{ $PID_CB{$pid} };
1081		1634
1082	undef $CHLD_W unless keys %PID_CB;	1635	undef $CHLD_W unless keys %PID_CB;
1083	}	1636	}
1084		1637
		1638	# idle emulation is done by simply using a timer, regardless
		1639	# of whether the process is idle or not, and not letting
		1640	# the callback use more than 50% of the time.
		1641	sub idle {
		1642	my (undef, %arg) = @_;
		1643
		1644	my ($cb, $w, $rcb) = $arg{cb};
		1645
		1646	$rcb = sub {
		1647	if ($cb) {
		1648	$w = _time;
		1649	&$cb;
		1650	$w = _time - $w;
		1651
		1652	# never use more then 50% of the time for the idle watcher,
		1653	# within some limits
		1654	$w = 0.0001 if $w < 0.0001;
		1655	$w = 5 if $w > 5;
		1656
		1657	$w = AE::timer $w, 0, $rcb;
		1658	} else {
		1659	# clean up...
		1660	undef $w;
		1661	undef $rcb;
		1662	}
		1663	};
		1664
		1665	$w = AE::timer 0.05, 0, $rcb;
		1666
		1667	bless \\$cb, "AnyEvent::Base::idle"
		1668	}
		1669
		1670	sub AnyEvent::Base::idle::DESTROY {
		1671	undef $${$_[0]};
		1672	}
		1673
1085	package AnyEvent::CondVar;	1674	package AnyEvent::CondVar;
1086		1675
1087	our @ISA = AnyEvent::CondVar::Base::;	1676	our @ISA = AnyEvent::CondVar::Base::;
1088		1677
1089	package AnyEvent::CondVar::Base;	1678	package AnyEvent::CondVar::Base;
1090		1679
1091	use overload	1680	#use overload
1092	'&{}' => sub { my $self = shift; sub { $self->send (@_) } },	1681	# '&{}' => sub { my $self = shift; sub { $self->send (@_) } },
1093	fallback => 1;	1682	# fallback => 1;
		1683
		1684	# save 300+ kilobytes by dirtily hardcoding overloading
		1685	${"AnyEvent::CondVar::Base::OVERLOAD"}{dummy}++; # Register with magic by touching.
		1686	*{'AnyEvent::CondVar::Base::()'} = sub { }; # "Make it findable via fetchmethod."
		1687	*{'AnyEvent::CondVar::Base::(&{}'} = sub { my $self = shift; sub { $self->send (@_) } }; # &{}
		1688	${'AnyEvent::CondVar::Base::()'} = 1; # fallback
		1689
		1690	our $WAITING;
1094		1691
1095	sub _send {	1692	sub _send {
1096	# nop	1693	# nop
1097	}	1694	}
1098		1695
…		…
1111	sub ready {	1708	sub ready {
1112	$_[0]{_ae_sent}	1709	$_[0]{_ae_sent}
1113	}	1710	}
1114		1711
1115	sub _wait {	1712	sub _wait {
		1713	$WAITING
		1714	and !$_[0]{_ae_sent}
		1715	and Carp::croak "AnyEvent::CondVar: recursive blocking wait detected";
		1716
		1717	local $WAITING = 1;
1116	AnyEvent->one_event while !$_[0]{_ae_sent};	1718	AnyEvent->one_event while !$_[0]{_ae_sent};
1117	}	1719	}
1118		1720
1119	sub recv {	1721	sub recv {
1120	$_[0]->_wait;	1722	$_[0]->_wait;
…		…
1122	Carp::croak $_[0]{_ae_croak} if $_[0]{_ae_croak};	1724	Carp::croak $_[0]{_ae_croak} if $_[0]{_ae_croak};
1123	wantarray ? @{ $_[0]{_ae_sent} } : $_[0]{_ae_sent}[0]	1725	wantarray ? @{ $_[0]{_ae_sent} } : $_[0]{_ae_sent}[0]
1124	}	1726	}
1125		1727
1126	sub cb {	1728	sub cb {
1127	$_[0]{_ae_cb} = $_[1] if @_ > 1;	1729	my $cv = shift;
		1730
		1731	@_
		1732	and $cv->{_ae_cb} = shift
		1733	and $cv->{_ae_sent}
		1734	and (delete $cv->{_ae_cb})->($cv);
		1735
1128	$_[0]{_ae_cb}	1736	$cv->{_ae_cb}
1129	}	1737	}
1130		1738
1131	sub begin {	1739	sub begin {
1132	++$_[0]{_ae_counter};	1740	++$_[0]{_ae_counter};
1133	$_[0]{_ae_end_cb} = $_[1] if @_ > 1;	1741	$_[0]{_ae_end_cb} = $_[1] if @_ > 1;
…		…
1139	}	1747	}
1140		1748
1141	# undocumented/compatibility with pre-3.4	1749	# undocumented/compatibility with pre-3.4
1142	*broadcast = \&send;	1750	*broadcast = \&send;
1143	*wait = \&_wait;	1751	*wait = \&_wait;
		1752
		1753	=head1 ERROR AND EXCEPTION HANDLING
		1754
		1755	In general, AnyEvent does not do any error handling - it relies on the
		1756	caller to do that if required. The L<AnyEvent::Strict> module (see also
		1757	the C<PERL_ANYEVENT_STRICT> environment variable, below) provides strict
		1758	checking of all AnyEvent methods, however, which is highly useful during
		1759	development.
		1760
		1761	As for exception handling (i.e. runtime errors and exceptions thrown while
		1762	executing a callback), this is not only highly event-loop specific, but
		1763	also not in any way wrapped by this module, as this is the job of the main
		1764	program.
		1765
		1766	The pure perl event loop simply re-throws the exception (usually
		1767	within C<< condvar->recv >>), the L<Event> and L<EV> modules call C<<
		1768	$Event/EV::DIED->() >>, L<Glib> uses C<< install_exception_handler >> and
		1769	so on.
		1770
		1771	=head1 ENVIRONMENT VARIABLES
		1772
		1773	The following environment variables are used by this module or its
		1774	submodules.
		1775
		1776	Note that AnyEvent will remove I<all> environment variables starting with
		1777	C<PERL_ANYEVENT_> from C<%ENV> when it is loaded while taint mode is
		1778	enabled.
		1779
		1780	=over 4
		1781
		1782	=item C<PERL_ANYEVENT_VERBOSE>
		1783
		1784	By default, AnyEvent will be completely silent except in fatal
		1785	conditions. You can set this environment variable to make AnyEvent more
		1786	talkative.
		1787
		1788	When set to C<1> or higher, causes AnyEvent to warn about unexpected
		1789	conditions, such as not being able to load the event model specified by
		1790	C<PERL_ANYEVENT_MODEL>.
		1791
		1792	When set to C<2> or higher, cause AnyEvent to report to STDERR which event
		1793	model it chooses.
		1794
		1795	When set to C<8> or higher, then AnyEvent will report extra information on
		1796	which optional modules it loads and how it implements certain features.
		1797
		1798	=item C<PERL_ANYEVENT_STRICT>
		1799
		1800	AnyEvent does not do much argument checking by default, as thorough
		1801	argument checking is very costly. Setting this variable to a true value
		1802	will cause AnyEvent to load C<AnyEvent::Strict> and then to thoroughly
		1803	check the arguments passed to most method calls. If it finds any problems,
		1804	it will croak.
		1805
		1806	In other words, enables "strict" mode.
		1807
		1808	Unlike C<use strict> (or it's modern cousin, C<< use L<common::sense>
		1809	>>, it is definitely recommended to keep it off in production. Keeping
		1810	C<PERL_ANYEVENT_STRICT=1> in your environment while developing programs
		1811	can be very useful, however.
		1812
		1813	=item C<PERL_ANYEVENT_MODEL>
		1814
		1815	This can be used to specify the event model to be used by AnyEvent, before
		1816	auto detection and -probing kicks in. It must be a string consisting
		1817	entirely of ASCII letters. The string C<AnyEvent::Impl::> gets prepended
		1818	and the resulting module name is loaded and if the load was successful,
		1819	used as event model. If it fails to load AnyEvent will proceed with
		1820	auto detection and -probing.
		1821
		1822	This functionality might change in future versions.
		1823
		1824	For example, to force the pure perl model (L<AnyEvent::Impl::Perl>) you
		1825	could start your program like this:
		1826
		1827	PERL_ANYEVENT_MODEL=Perl perl ...
		1828
		1829	=item C<PERL_ANYEVENT_PROTOCOLS>
		1830
		1831	Used by both L<AnyEvent::DNS> and L<AnyEvent::Socket> to determine preferences
		1832	for IPv4 or IPv6. The default is unspecified (and might change, or be the result
		1833	of auto probing).
		1834
		1835	Must be set to a comma-separated list of protocols or address families,
		1836	current supported: C<ipv4> and C<ipv6>. Only protocols mentioned will be
		1837	used, and preference will be given to protocols mentioned earlier in the
		1838	list.
		1839
		1840	This variable can effectively be used for denial-of-service attacks
		1841	against local programs (e.g. when setuid), although the impact is likely
		1842	small, as the program has to handle conenction and other failures anyways.
		1843
		1844	Examples: C<PERL_ANYEVENT_PROTOCOLS=ipv4,ipv6> - prefer IPv4 over IPv6,
		1845	but support both and try to use both. C<PERL_ANYEVENT_PROTOCOLS=ipv4>
		1846	- only support IPv4, never try to resolve or contact IPv6
		1847	addresses. C<PERL_ANYEVENT_PROTOCOLS=ipv6,ipv4> support either IPv4 or
		1848	IPv6, but prefer IPv6 over IPv4.
		1849
		1850	=item C<PERL_ANYEVENT_EDNS0>
		1851
		1852	Used by L<AnyEvent::DNS> to decide whether to use the EDNS0 extension
		1853	for DNS. This extension is generally useful to reduce DNS traffic, but
		1854	some (broken) firewalls drop such DNS packets, which is why it is off by
		1855	default.
		1856
		1857	Setting this variable to C<1> will cause L<AnyEvent::DNS> to announce
		1858	EDNS0 in its DNS requests.
		1859
		1860	=item C<PERL_ANYEVENT_MAX_FORKS>
		1861
		1862	The maximum number of child processes that C<AnyEvent::Util::fork_call>
		1863	will create in parallel.
		1864
		1865	=item C<PERL_ANYEVENT_MAX_OUTSTANDING_DNS>
		1866
		1867	The default value for the C<max_outstanding> parameter for the default DNS
		1868	resolver - this is the maximum number of parallel DNS requests that are
		1869	sent to the DNS server.
		1870
		1871	=item C<PERL_ANYEVENT_RESOLV_CONF>
		1872
		1873	The file to use instead of F</etc/resolv.conf> (or OS-specific
		1874	configuration) in the default resolver. When set to the empty string, no
		1875	default config will be used.
		1876
		1877	=item C<PERL_ANYEVENT_CA_FILE>, C<PERL_ANYEVENT_CA_PATH>.
		1878
		1879	When neither C<ca_file> nor C<ca_path> was specified during
		1880	L<AnyEvent::TLS> context creation, and either of these environment
		1881	variables exist, they will be used to specify CA certificate locations
		1882	instead of a system-dependent default.
		1883
		1884	=item C<PERL_ANYEVENT_AVOID_GUARD> and C<PERL_ANYEVENT_AVOID_ASYNC_INTERRUPT>
		1885
		1886	When these are set to C<1>, then the respective modules are not
		1887	loaded. Mostly good for testing AnyEvent itself.
		1888
		1889	=back
1144		1890
1145	=head1 SUPPLYING YOUR OWN EVENT MODEL INTERFACE	1891	=head1 SUPPLYING YOUR OWN EVENT MODEL INTERFACE
1146		1892
1147	This is an advanced topic that you do not normally need to use AnyEvent in	1893	This is an advanced topic that you do not normally need to use AnyEvent in
1148	a module. This section is only of use to event loop authors who want to	1894	a module. This section is only of use to event loop authors who want to
…		…
1182		1928
1183	I<rxvt-unicode> also cheats a bit by not providing blocking access to	1929	I<rxvt-unicode> also cheats a bit by not providing blocking access to
1184	condition variables: code blocking while waiting for a condition will	1930	condition variables: code blocking while waiting for a condition will
1185	C<die>. This still works with most modules/usages, and blocking calls must	1931	C<die>. This still works with most modules/usages, and blocking calls must
1186	not be done in an interactive application, so it makes sense.	1932	not be done in an interactive application, so it makes sense.
1187
1188	=head1 ENVIRONMENT VARIABLES
1189
1190	The following environment variables are used by this module:
1191
1192	=over 4
1193
1194	=item C<PERL_ANYEVENT_VERBOSE>
1195
1196	By default, AnyEvent will be completely silent except in fatal
1197	conditions. You can set this environment variable to make AnyEvent more
1198	talkative.
1199
1200	When set to C<1> or higher, causes AnyEvent to warn about unexpected
1201	conditions, such as not being able to load the event model specified by
1202	C<PERL_ANYEVENT_MODEL>.
1203
1204	When set to C<2> or higher, cause AnyEvent to report to STDERR which event
1205	model it chooses.
1206
1207	=item C<PERL_ANYEVENT_STRICT>
1208
1209	AnyEvent does not do much argument checking by default, as thorough
1210	argument checking is very costly. Setting this variable to a true value
1211	will cause AnyEvent to load C<AnyEvent::Strict> and then to thoroughly
1212	check the arguments passed to most method calls. If it finds any problems
1213	it will croak.
1214
1215	In other words, enables "strict" mode.
1216
1217	Unlike C<use strict> it is definitely recommended ot keep it off in
1218	production.
1219
1220	=item C<PERL_ANYEVENT_MODEL>
1221
1222	This can be used to specify the event model to be used by AnyEvent, before
1223	auto detection and -probing kicks in. It must be a string consisting
1224	entirely of ASCII letters. The string C<AnyEvent::Impl::> gets prepended
1225	and the resulting module name is loaded and if the load was successful,
1226	used as event model. If it fails to load AnyEvent will proceed with
1227	auto detection and -probing.
1228
1229	This functionality might change in future versions.
1230
1231	For example, to force the pure perl model (L<AnyEvent::Impl::Perl>) you
1232	could start your program like this:
1233
1234	PERL_ANYEVENT_MODEL=Perl perl ...
1235
1236	=item C<PERL_ANYEVENT_PROTOCOLS>
1237
1238	Used by both L<AnyEvent::DNS> and L<AnyEvent::Socket> to determine preferences
1239	for IPv4 or IPv6. The default is unspecified (and might change, or be the result
1240	of auto probing).
1241
1242	Must be set to a comma-separated list of protocols or address families,
1243	current supported: C<ipv4> and C<ipv6>. Only protocols mentioned will be
1244	used, and preference will be given to protocols mentioned earlier in the
1245	list.
1246
1247	This variable can effectively be used for denial-of-service attacks
1248	against local programs (e.g. when setuid), although the impact is likely
1249	small, as the program has to handle connection errors already-
1250
1251	Examples: C<PERL_ANYEVENT_PROTOCOLS=ipv4,ipv6> - prefer IPv4 over IPv6,
1252	but support both and try to use both. C<PERL_ANYEVENT_PROTOCOLS=ipv4>
1253	- only support IPv4, never try to resolve or contact IPv6
1254	addresses. C<PERL_ANYEVENT_PROTOCOLS=ipv6,ipv4> support either IPv4 or
1255	IPv6, but prefer IPv6 over IPv4.
1256
1257	=item C<PERL_ANYEVENT_EDNS0>
1258
1259	Used by L<AnyEvent::DNS> to decide whether to use the EDNS0 extension
1260	for DNS. This extension is generally useful to reduce DNS traffic, but
1261	some (broken) firewalls drop such DNS packets, which is why it is off by
1262	default.
1263
1264	Setting this variable to C<1> will cause L<AnyEvent::DNS> to announce
1265	EDNS0 in its DNS requests.
1266
1267	=item C<PERL_ANYEVENT_MAX_FORKS>
1268
1269	The maximum number of child processes that C<AnyEvent::Util::fork_call>
1270	will create in parallel.
1271
1272	=back
1273		1933
1274	=head1 EXAMPLE PROGRAM	1934	=head1 EXAMPLE PROGRAM
1275		1935
1276	The following program uses an I/O watcher to read data from STDIN, a timer	1936	The following program uses an I/O watcher to read data from STDIN, a timer
1277	to display a message once per second, and a condition variable to quit the	1937	to display a message once per second, and a condition variable to quit the
…		…
1290	warn "read: $input\n"; # output what has been read	1950	warn "read: $input\n"; # output what has been read
1291	$cv->send if $input =~ /^q/i; # quit program if /^q/i	1951	$cv->send if $input =~ /^q/i; # quit program if /^q/i
1292	},	1952	},
1293	);	1953	);
1294		1954
1295	my $time_watcher; # can only be used once
1296
1297	sub new_timer {
1298	$timer = AnyEvent->timer (after => 1, cb => sub {	1955	my $time_watcher = AnyEvent->timer (after => 1, interval => 1, cb => sub {
1299	warn "timeout\n"; # print 'timeout' about every second	1956	warn "timeout\n"; # print 'timeout' at most every second
1300	&new_timer; # and restart the time
1301	});	1957	});
1302	}
1303
1304	new_timer; # create first timer
1305		1958
1306	$cv->recv; # wait until user enters /^q/i	1959	$cv->recv; # wait until user enters /^q/i
1307		1960
1308	=head1 REAL-WORLD EXAMPLE	1961	=head1 REAL-WORLD EXAMPLE
1309		1962
…		…
1440	through AnyEvent. The benchmark creates a lot of timers (with a zero	2093	through AnyEvent. The benchmark creates a lot of timers (with a zero
1441	timeout) and I/O watchers (watching STDOUT, a pty, to become writable,	2094	timeout) and I/O watchers (watching STDOUT, a pty, to become writable,
1442	which it is), lets them fire exactly once and destroys them again.	2095	which it is), lets them fire exactly once and destroys them again.
1443		2096
1444	Source code for this benchmark is found as F<eg/bench> in the AnyEvent	2097	Source code for this benchmark is found as F<eg/bench> in the AnyEvent
1445	distribution.	2098	distribution. It uses the L<AE> interface, which makes a real difference
		2099	for the EV and Perl backends only.
1446		2100
1447	=head3 Explanation of the columns	2101	=head3 Explanation of the columns
1448		2102
1449	I<watcher> is the number of event watchers created/destroyed. Since	2103	I<watcher> is the number of event watchers created/destroyed. Since
1450	different event models feature vastly different performances, each event	2104	different event models feature vastly different performances, each event
…		…
1471	watcher.	2125	watcher.
1472		2126
1473	=head3 Results	2127	=head3 Results
1474		2128
1475	name watchers bytes create invoke destroy comment	2129	name watchers bytes create invoke destroy comment
1476	EV/EV 400000 244 0.56 0.46 0.31 EV native interface	2130	EV/EV 100000 223 0.47 0.43 0.27 EV native interface
1477	EV/Any 100000 244 2.50 0.46 0.29 EV + AnyEvent watchers	2131	EV/Any 100000 223 0.48 0.42 0.26 EV + AnyEvent watchers
1478	CoroEV/Any 100000 244 2.49 0.44 0.29 coroutines + Coro::Signal	2132	Coro::EV/Any 100000 223 0.47 0.42 0.26 coroutines + Coro::Signal
1479	Perl/Any 100000 513 4.92 0.87 1.12 pure perl implementation	2133	Perl/Any 100000 431 2.70 0.74 0.92 pure perl implementation
1480	Event/Event 16000 516 31.88 31.30 0.85 Event native interface	2134	Event/Event 16000 516 31.16 31.84 0.82 Event native interface
1481	Event/Any 16000 590 35.75 31.42 1.08 Event + AnyEvent watchers	2135	Event/Any 16000 1203 42.61 34.79 1.80 Event + AnyEvent watchers
		2136	IOAsync/Any 16000 1911 41.92 27.45 16.81 via IO::Async::Loop::IO_Poll
		2137	IOAsync/Any 16000 1726 40.69 26.37 15.25 via IO::Async::Loop::Epoll
1482	Glib/Any 16000 1357 98.22 12.41 54.00 quadratic behaviour	2138	Glib/Any 16000 1118 89.00 12.57 51.17 quadratic behaviour
1483	Tk/Any 2000 1860 26.97 67.98 14.00 SEGV with >> 2000 watchers	2139	Tk/Any 2000 1346 20.96 10.75 8.00 SEGV with >> 2000 watchers
1484	POE/Event 2000 6644 108.64 736.02 14.73 via POE::Loop::Event	2140	POE/Any 2000 6951 108.97 795.32 14.24 via POE::Loop::Event
1485	POE/Select 2000 6343 94.13 809.12 565.96 via POE::Loop::Select	2141	POE/Any 2000 6648 94.79 774.40 575.51 via POE::Loop::Select
1486		2142
1487	=head3 Discussion	2143	=head3 Discussion
1488		2144
1489	The benchmark does I<not> measure scalability of the event loop very	2145	The benchmark does I<not> measure scalability of the event loop very
1490	well. For example, a select-based event loop (such as the pure perl one)	2146	well. For example, a select-based event loop (such as the pure perl one)
…		…
1502	benchmark machine, handling an event takes roughly 1600 CPU cycles with	2158	benchmark machine, handling an event takes roughly 1600 CPU cycles with
1503	EV, 3100 CPU cycles with AnyEvent's pure perl loop and almost 3000000 CPU	2159	EV, 3100 CPU cycles with AnyEvent's pure perl loop and almost 3000000 CPU
1504	cycles with POE.	2160	cycles with POE.
1505		2161
1506	C<EV> is the sole leader regarding speed and memory use, which are both	2162	C<EV> is the sole leader regarding speed and memory use, which are both
1507	maximal/minimal, respectively. Even when going through AnyEvent, it uses	2163	maximal/minimal, respectively. When using the L<AE> API there is zero
		2164	overhead (when going through the AnyEvent API create is about 5-6 times
		2165	slower, with other times being equal, so still uses far less memory than
1508	far less memory than any other event loop and is still faster than Event	2166	any other event loop and is still faster than Event natively).
1509	natively.
1510		2167
1511	The pure perl implementation is hit in a few sweet spots (both the	2168	The pure perl implementation is hit in a few sweet spots (both the
1512	constant timeout and the use of a single fd hit optimisations in the perl	2169	constant timeout and the use of a single fd hit optimisations in the perl
1513	interpreter and the backend itself). Nevertheless this shows that it	2170	interpreter and the backend itself). Nevertheless this shows that it
1514	adds very little overhead in itself. Like any select-based backend its	2171	adds very little overhead in itself. Like any select-based backend its
1515	performance becomes really bad with lots of file descriptors (and few of	2172	performance becomes really bad with lots of file descriptors (and few of
1516	them active), of course, but this was not subject of this benchmark.	2173	them active), of course, but this was not subject of this benchmark.
1517		2174
1518	The C<Event> module has a relatively high setup and callback invocation	2175	The C<Event> module has a relatively high setup and callback invocation
1519	cost, but overall scores in on the third place.	2176	cost, but overall scores in on the third place.
		2177
		2178	C<IO::Async> performs admirably well, about on par with C<Event>, even
		2179	when using its pure perl backend.
1520		2180
1521	C<Glib>'s memory usage is quite a bit higher, but it features a	2181	C<Glib>'s memory usage is quite a bit higher, but it features a
1522	faster callback invocation and overall ends up in the same class as	2182	faster callback invocation and overall ends up in the same class as
1523	C<Event>. However, Glib scales extremely badly, doubling the number of	2183	C<Event>. However, Glib scales extremely badly, doubling the number of
1524	watchers increases the processing time by more than a factor of four,	2184	watchers increases the processing time by more than a factor of four,
…		…
1585	In this benchmark, we use 10000 socket pairs (20000 sockets), of which 100	2245	In this benchmark, we use 10000 socket pairs (20000 sockets), of which 100
1586	(1%) are active. This mirrors the activity of large servers with many	2246	(1%) are active. This mirrors the activity of large servers with many
1587	connections, most of which are idle at any one point in time.	2247	connections, most of which are idle at any one point in time.
1588		2248
1589	Source code for this benchmark is found as F<eg/bench2> in the AnyEvent	2249	Source code for this benchmark is found as F<eg/bench2> in the AnyEvent
1590	distribution.	2250	distribution. It uses the L<AE> interface, which makes a real difference
		2251	for the EV and Perl backends only.
1591		2252
1592	=head3 Explanation of the columns	2253	=head3 Explanation of the columns
1593		2254
1594	I<sockets> is the number of sockets, and twice the number of "servers" (as	2255	I<sockets> is the number of sockets, and twice the number of "servers" (as
1595	each server has a read and write socket end).	2256	each server has a read and write socket end).
…		…
1602	it to another server. This includes deleting the old timeout and creating	2263	it to another server. This includes deleting the old timeout and creating
1603	a new one that moves the timeout into the future.	2264	a new one that moves the timeout into the future.
1604		2265
1605	=head3 Results	2266	=head3 Results
1606		2267
1607	name sockets create request	2268	name sockets create request
1608	EV 20000 69.01 11.16	2269	EV 20000 62.66 7.99
1609	Perl 20000 73.32 35.87	2270	Perl 20000 68.32 32.64
1610	Event 20000 212.62 257.32	2271	IOAsync 20000 174.06 101.15 epoll
1611	Glib 20000 651.16 1896.30	2272	IOAsync 20000 174.67 610.84 poll
		2273	Event 20000 202.69 242.91
		2274	Glib 20000 557.01 1689.52
1612	POE 20000 349.67 12317.24 uses POE::Loop::Event	2275	POE 20000 341.54 12086.32 uses POE::Loop::Event
1613		2276
1614	=head3 Discussion	2277	=head3 Discussion
1615		2278
1616	This benchmark I<does> measure scalability and overall performance of the	2279	This benchmark I<does> measure scalability and overall performance of the
1617	particular event loop.	2280	particular event loop.
…		…
1619	EV is again fastest. Since it is using epoll on my system, the setup time	2282	EV is again fastest. Since it is using epoll on my system, the setup time
1620	is relatively high, though.	2283	is relatively high, though.
1621		2284
1622	Perl surprisingly comes second. It is much faster than the C-based event	2285	Perl surprisingly comes second. It is much faster than the C-based event
1623	loops Event and Glib.	2286	loops Event and Glib.
		2287
		2288	IO::Async performs very well when using its epoll backend, and still quite
		2289	good compared to Glib when using its pure perl backend.
1624		2290
1625	Event suffers from high setup time as well (look at its code and you will	2291	Event suffers from high setup time as well (look at its code and you will
1626	understand why). Callback invocation also has a high overhead compared to	2292	understand why). Callback invocation also has a high overhead compared to
1627	the C<< $_->() for .. >>-style loop that the Perl event loop uses. Event	2293	the C<< $_->() for .. >>-style loop that the Perl event loop uses. Event
1628	uses select or poll in basically all documented configurations.	2294	uses select or poll in basically all documented configurations.
…		…
1691	=item * C-based event loops perform very well with small number of	2357	=item * C-based event loops perform very well with small number of
1692	watchers, as the management overhead dominates.	2358	watchers, as the management overhead dominates.
1693		2359
1694	=back	2360	=back
1695		2361
		2362	=head2 THE IO::Lambda BENCHMARK
		2363
		2364	Recently I was told about the benchmark in the IO::Lambda manpage, which
		2365	could be misinterpreted to make AnyEvent look bad. In fact, the benchmark
		2366	simply compares IO::Lambda with POE, and IO::Lambda looks better (which
		2367	shouldn't come as a surprise to anybody). As such, the benchmark is
		2368	fine, and mostly shows that the AnyEvent backend from IO::Lambda isn't
		2369	very optimal. But how would AnyEvent compare when used without the extra
		2370	baggage? To explore this, I wrote the equivalent benchmark for AnyEvent.
		2371
		2372	The benchmark itself creates an echo-server, and then, for 500 times,
		2373	connects to the echo server, sends a line, waits for the reply, and then
		2374	creates the next connection. This is a rather bad benchmark, as it doesn't
		2375	test the efficiency of the framework or much non-blocking I/O, but it is a
		2376	benchmark nevertheless.
		2377
		2378	name runtime
		2379	Lambda/select 0.330 sec
		2380	+ optimized 0.122 sec
		2381	Lambda/AnyEvent 0.327 sec
		2382	+ optimized 0.138 sec
		2383	Raw sockets/select 0.077 sec
		2384	POE/select, components 0.662 sec
		2385	POE/select, raw sockets 0.226 sec
		2386	POE/select, optimized 0.404 sec
		2387
		2388	AnyEvent/select/nb 0.085 sec
		2389	AnyEvent/EV/nb 0.068 sec
		2390	+state machine 0.134 sec
		2391
		2392	The benchmark is also a bit unfair (my fault): the IO::Lambda/POE
		2393	benchmarks actually make blocking connects and use 100% blocking I/O,
		2394	defeating the purpose of an event-based solution. All of the newly
		2395	written AnyEvent benchmarks use 100% non-blocking connects (using
		2396	AnyEvent::Socket::tcp_connect and the asynchronous pure perl DNS
		2397	resolver), so AnyEvent is at a disadvantage here, as non-blocking connects
		2398	generally require a lot more bookkeeping and event handling than blocking
		2399	connects (which involve a single syscall only).
		2400
		2401	The last AnyEvent benchmark additionally uses L<AnyEvent::Handle>, which
		2402	offers similar expressive power as POE and IO::Lambda, using conventional
		2403	Perl syntax. This means that both the echo server and the client are 100%
		2404	non-blocking, further placing it at a disadvantage.
		2405
		2406	As you can see, the AnyEvent + EV combination even beats the
		2407	hand-optimised "raw sockets benchmark", while AnyEvent + its pure perl
		2408	backend easily beats IO::Lambda and POE.
		2409
		2410	And even the 100% non-blocking version written using the high-level (and
		2411	slow :) L<AnyEvent::Handle> abstraction beats both POE and IO::Lambda
		2412	higher level ("unoptimised") abstractions by a large margin, even though
		2413	it does all of DNS, tcp-connect and socket I/O in a non-blocking way.
		2414
		2415	The two AnyEvent benchmarks programs can be found as F<eg/ae0.pl> and
		2416	F<eg/ae2.pl> in the AnyEvent distribution, the remaining benchmarks are
		2417	part of the IO::Lambda distribution and were used without any changes.
		2418
		2419
		2420	=head1 SIGNALS
		2421
		2422	AnyEvent currently installs handlers for these signals:
		2423
		2424	=over 4
		2425
		2426	=item SIGCHLD
		2427
		2428	A handler for C<SIGCHLD> is installed by AnyEvent's child watcher
		2429	emulation for event loops that do not support them natively. Also, some
		2430	event loops install a similar handler.
		2431
		2432	Additionally, when AnyEvent is loaded and SIGCHLD is set to IGNORE, then
		2433	AnyEvent will reset it to default, to avoid losing child exit statuses.
		2434
		2435	=item SIGPIPE
		2436
		2437	A no-op handler is installed for C<SIGPIPE> when C<$SIG{PIPE}> is C<undef>
		2438	when AnyEvent gets loaded.
		2439
		2440	The rationale for this is that AnyEvent users usually do not really depend
		2441	on SIGPIPE delivery (which is purely an optimisation for shell use, or
		2442	badly-written programs), but C<SIGPIPE> can cause spurious and rare
		2443	program exits as a lot of people do not expect C<SIGPIPE> when writing to
		2444	some random socket.
		2445
		2446	The rationale for installing a no-op handler as opposed to ignoring it is
		2447	that this way, the handler will be restored to defaults on exec.
		2448
		2449	Feel free to install your own handler, or reset it to defaults.
		2450
		2451	=back
		2452
		2453	=cut
		2454
		2455	undef $SIG{CHLD}
		2456	if $SIG{CHLD} eq 'IGNORE';
		2457
		2458	$SIG{PIPE} = sub { }
		2459	unless defined $SIG{PIPE};
		2460
		2461	=head1 RECOMMENDED/OPTIONAL MODULES
		2462
		2463	One of AnyEvent's main goals is to be 100% Pure-Perl(tm): only perl (and
		2464	it's built-in modules) are required to use it.
		2465
		2466	That does not mean that AnyEvent won't take advantage of some additional
		2467	modules if they are installed.
		2468
		2469	This section explains which additional modules will be used, and how they
		2470	affect AnyEvent's operation.
		2471
		2472	=over 4
		2473
		2474	=item L<Async::Interrupt>
		2475
		2476	This slightly arcane module is used to implement fast signal handling: To
		2477	my knowledge, there is no way to do completely race-free and quick
		2478	signal handling in pure perl. To ensure that signals still get
		2479	delivered, AnyEvent will start an interval timer to wake up perl (and
		2480	catch the signals) with some delay (default is 10 seconds, look for
		2481	C<$AnyEvent::MAX_SIGNAL_LATENCY>).
		2482
		2483	If this module is available, then it will be used to implement signal
		2484	catching, which means that signals will not be delayed, and the event loop
		2485	will not be interrupted regularly, which is more efficient (and good for
		2486	battery life on laptops).
		2487
		2488	This affects not just the pure-perl event loop, but also other event loops
		2489	that have no signal handling on their own (e.g. Glib, Tk, Qt).
		2490
		2491	Some event loops (POE, Event, Event::Lib) offer signal watchers natively,
		2492	and either employ their own workarounds (POE) or use AnyEvent's workaround
		2493	(using C<$AnyEvent::MAX_SIGNAL_LATENCY>). Installing L<Async::Interrupt>
		2494	does nothing for those backends.
		2495
		2496	=item L<EV>
		2497
		2498	This module isn't really "optional", as it is simply one of the backend
		2499	event loops that AnyEvent can use. However, it is simply the best event
		2500	loop available in terms of features, speed and stability: It supports
		2501	the AnyEvent API optimally, implements all the watcher types in XS, does
		2502	automatic timer adjustments even when no monotonic clock is available,
		2503	can take avdantage of advanced kernel interfaces such as C<epoll> and
		2504	C<kqueue>, and is the fastest backend I<by far>. You can even embed
		2505	L<Glib>/L<Gtk2> in it (or vice versa, see L<EV::Glib> and L<Glib::EV>).
		2506
		2507	=item L<Guard>
		2508
		2509	The guard module, when used, will be used to implement
		2510	C<AnyEvent::Util::guard>. This speeds up guards considerably (and uses a
		2511	lot less memory), but otherwise doesn't affect guard operation much. It is
		2512	purely used for performance.
		2513
		2514	=item L<JSON> and L<JSON::XS>
		2515
		2516	One of these modules is required when you want to read or write JSON data
		2517	via L<AnyEvent::Handle>. It is also written in pure-perl, but can take
		2518	advantage of the ultra-high-speed L<JSON::XS> module when it is installed.
		2519
		2520	In fact, L<AnyEvent::Handle> will use L<JSON::XS> by default if it is
		2521	installed.
		2522
		2523	=item L<Net::SSLeay>
		2524
		2525	Implementing TLS/SSL in Perl is certainly interesting, but not very
		2526	worthwhile: If this module is installed, then L<AnyEvent::Handle> (with
		2527	the help of L<AnyEvent::TLS>), gains the ability to do TLS/SSL.
		2528
		2529	=item L<Time::HiRes>
		2530
		2531	This module is part of perl since release 5.008. It will be used when the
		2532	chosen event library does not come with a timing source on it's own. The
		2533	pure-perl event loop (L<AnyEvent::Impl::Perl>) will additionally use it to
		2534	try to use a monotonic clock for timing stability.
		2535
		2536	=back
		2537
1696		2538
1697	=head1 FORK	2539	=head1 FORK
1698		2540
1699	Most event libraries are not fork-safe. The ones who are usually are	2541	Most event libraries are not fork-safe. The ones who are usually are
1700	because they rely on inefficient but fork-safe C<select> or C<poll>	2542	because they rely on inefficient but fork-safe C<select> or C<poll> calls
1701	calls. Only L<EV> is fully fork-aware.	2543	- higher performance APIs such as BSD's kqueue or the dreaded Linux epoll
		2544	are usually badly thought-out hacks that are incompatible with fork in
		2545	one way or another. Only L<EV> is fully fork-aware and ensures that you
		2546	continue event-processing in both parent and child (or both, if you know
		2547	what you are doing).
		2548
		2549	This means that, in general, you cannot fork and do event processing in
		2550	the child if the event library was initialised before the fork (which
		2551	usually happens when the first AnyEvent watcher is created, or the library
		2552	is loaded).
1702		2553
1703	If you have to fork, you must either do so I<before> creating your first	2554	If you have to fork, you must either do so I<before> creating your first
1704	watcher OR you must not use AnyEvent at all in the child.	2555	watcher OR you must not use AnyEvent at all in the child OR you must do
		2556	something completely out of the scope of AnyEvent.
		2557
		2558	The problem of doing event processing in the parent I<and> the child
		2559	is much more complicated: even for backends that I<are> fork-aware or
		2560	fork-safe, their behaviour is not usually what you want: fork clones all
		2561	watchers, that means all timers, I/O watchers etc. are active in both
		2562	parent and child, which is almost never what you want. USing C<exec>
		2563	to start worker children from some kind of manage rprocess is usually
		2564	preferred, because it is much easier and cleaner, at the expense of having
		2565	to have another binary.
1705		2566
1706		2567
1707	=head1 SECURITY CONSIDERATIONS	2568	=head1 SECURITY CONSIDERATIONS
1708		2569
1709	AnyEvent can be forced to load any event model via	2570	AnyEvent can be forced to load any event model via
…		…
1721	use AnyEvent;	2582	use AnyEvent;
1722		2583
1723	Similar considerations apply to $ENV{PERL_ANYEVENT_VERBOSE}, as that can	2584	Similar considerations apply to $ENV{PERL_ANYEVENT_VERBOSE}, as that can
1724	be used to probe what backend is used and gain other information (which is	2585	be used to probe what backend is used and gain other information (which is
1725	probably even less useful to an attacker than PERL_ANYEVENT_MODEL), and	2586	probably even less useful to an attacker than PERL_ANYEVENT_MODEL), and
1726	$ENV{PERL_ANYEGENT_STRICT}.	2587	$ENV{PERL_ANYEVENT_STRICT}.
		2588
		2589	Note that AnyEvent will remove I<all> environment variables starting with
		2590	C<PERL_ANYEVENT_> from C<%ENV> when it is loaded while taint mode is
		2591	enabled.
1727		2592
1728		2593
1729	=head1 BUGS	2594	=head1 BUGS
1730		2595
1731	Perl 5.8 has numerous memleaks that sometimes hit this module and are hard	2596	Perl 5.8 has numerous memleaks that sometimes hit this module and are hard
1732	to work around. If you suffer from memleaks, first upgrade to Perl 5.10	2597	to work around. If you suffer from memleaks, first upgrade to Perl 5.10
1733	and check wether the leaks still show up. (Perl 5.10.0 has other annoying	2598	and check wether the leaks still show up. (Perl 5.10.0 has other annoying
1734	mamleaks, such as leaking on C<map> and C<grep> but it is usually not as	2599	memleaks, such as leaking on C<map> and C<grep> but it is usually not as
1735	pronounced).	2600	pronounced).
1736		2601
1737		2602
1738	=head1 SEE ALSO	2603	=head1 SEE ALSO
1739		2604
…		…
1743	L<Glib>, L<Tk>, L<Event::Lib>, L<Qt>, L<POE>.	2608	L<Glib>, L<Tk>, L<Event::Lib>, L<Qt>, L<POE>.
1744		2609
1745	Implementations: L<AnyEvent::Impl::EV>, L<AnyEvent::Impl::Event>,	2610	Implementations: L<AnyEvent::Impl::EV>, L<AnyEvent::Impl::Event>,
1746	L<AnyEvent::Impl::Glib>, L<AnyEvent::Impl::Tk>, L<AnyEvent::Impl::Perl>,	2611	L<AnyEvent::Impl::Glib>, L<AnyEvent::Impl::Tk>, L<AnyEvent::Impl::Perl>,
1747	L<AnyEvent::Impl::EventLib>, L<AnyEvent::Impl::Qt>,	2612	L<AnyEvent::Impl::EventLib>, L<AnyEvent::Impl::Qt>,
1748	L<AnyEvent::Impl::POE>.	2613	L<AnyEvent::Impl::POE>, L<AnyEvent::Impl::IOAsync>, L<Anyevent::Impl::Irssi>.
1749		2614
1750	Non-blocking file handles, sockets, TCP clients and	2615	Non-blocking file handles, sockets, TCP clients and
1751	servers: L<AnyEvent::Handle>, L<AnyEvent::Socket>.	2616	servers: L<AnyEvent::Handle>, L<AnyEvent::Socket>, L<AnyEvent::TLS>.
1752		2617
1753	Asynchronous DNS: L<AnyEvent::DNS>.	2618	Asynchronous DNS: L<AnyEvent::DNS>.
1754		2619
1755	Coroutine support: L<Coro>, L<Coro::AnyEvent>, L<Coro::EV>, L<Coro::Event>,	2620	Coroutine support: L<Coro>, L<Coro::AnyEvent>, L<Coro::EV>,
		2621	L<Coro::Event>,
1756		2622
1757	Nontrivial usage examples: L<Net::FCP>, L<Net::XMPP2>, L<AnyEvent::DNS>.	2623	Nontrivial usage examples: L<AnyEvent::GPSD>, L<AnyEvent::XMPP>,
		2624	L<AnyEvent::HTTP>.
1758		2625
1759		2626
1760	=head1 AUTHOR	2627	=head1 AUTHOR
1761		2628
1762	Marc Lehmann <schmorp@schmorp.de>	2629	Marc Lehmann <schmorp@schmorp.de>

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines