ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent.pm

Comparing AnyEvent/lib/AnyEvent.pm (file contents):
Revision 1.173 by root, Mon Jul 21 03:47:22 2008 UTC vs.
Revision 1.297 by root, Thu Nov 19 01:55:57 2009 UTC

1	=head1 NAME	1	=head1 NAME
2		2
3	AnyEvent - provide framework for multiple event loops	3	AnyEvent - the DBI of event loop programming
4		4
5	EV, Event, Glib, Tk, Perl, Event::Lib, Qt, POE - various supported event loops	5	EV, Event, Glib, Tk, Perl, Event::Lib, Irssi, rxvt-unicode, IO::Async, Qt
		6	and POE are various supported event loops/environments.
6		7
7	=head1 SYNOPSIS	8	=head1 SYNOPSIS
8		9
9	use AnyEvent;	10	use AnyEvent;
10		11
		12	# file descriptor readable
11	my $w = AnyEvent->io (fh => $fh, poll => "r|w", cb => sub { ... });	13	my $w = AnyEvent->io (fh => $fh, poll => "r", cb => sub { ... });
12		14
		15	# one-shot or repeating timers
13	my $w = AnyEvent->timer (after => $seconds, cb => sub { ... });	16	my $w = AnyEvent->timer (after => $seconds, cb => sub { ... });
14	my $w = AnyEvent->timer (after => $seconds, interval => $seconds, cb => ...	17	my $w = AnyEvent->timer (after => $seconds, interval => $seconds, cb => ...
15		18
16	print AnyEvent->now; # prints current event loop time	19	print AnyEvent->now; # prints current event loop time
17	print AnyEvent->time; # think Time::HiRes::time or simply CORE::time.	20	print AnyEvent->time; # think Time::HiRes::time or simply CORE::time.
18		21
		22	# POSIX signal
19	my $w = AnyEvent->signal (signal => "TERM", cb => sub { ... });	23	my $w = AnyEvent->signal (signal => "TERM", cb => sub { ... });
20		24
		25	# child process exit
21	my $w = AnyEvent->child (pid => $pid, cb => sub {	26	my $w = AnyEvent->child (pid => $pid, cb => sub {
22	my ($pid, $status) = @_;	27	my ($pid, $status) = @_;
23	...	28	...
24	});	29	});
		30
		31	# called when event loop idle (if applicable)
		32	my $w = AnyEvent->idle (cb => sub { ... });
25		33
26	my $w = AnyEvent->condvar; # stores whether a condition was flagged	34	my $w = AnyEvent->condvar; # stores whether a condition was flagged
27	$w->send; # wake up current and all future recv's	35	$w->send; # wake up current and all future recv's
28	$w->recv; # enters "main loop" till $condvar gets ->send	36	$w->recv; # enters "main loop" till $condvar gets ->send
29	# use a condvar in callback mode:	37	# use a condvar in callback mode:
…		…
32	=head1 INTRODUCTION/TUTORIAL	40	=head1 INTRODUCTION/TUTORIAL
33		41
34	This manpage is mainly a reference manual. If you are interested	42	This manpage is mainly a reference manual. If you are interested
35	in a tutorial or some gentle introduction, have a look at the	43	in a tutorial or some gentle introduction, have a look at the
36	L<AnyEvent::Intro> manpage.	44	L<AnyEvent::Intro> manpage.
		45
		46	=head1 SUPPORT
		47
		48	There is a mailinglist for discussing all things AnyEvent, and an IRC
		49	channel, too.
		50
		51	See the AnyEvent project page at the B<Schmorpforge Ta-Sa Software
		52	Repository>, at L<http://anyevent.schmorp.de>, for more info.
37		53
38	=head1 WHY YOU SHOULD USE THIS MODULE (OR NOT)	54	=head1 WHY YOU SHOULD USE THIS MODULE (OR NOT)
39		55
40	Glib, POE, IO::Async, Event... CPAN offers event models by the dozen	56	Glib, POE, IO::Async, Event... CPAN offers event models by the dozen
41	nowadays. So what is different about AnyEvent?	57	nowadays. So what is different about AnyEvent?
…		…
137	These watchers are normal Perl objects with normal Perl lifetime. After	153	These watchers are normal Perl objects with normal Perl lifetime. After
138	creating a watcher it will immediately "watch" for events and invoke the	154	creating a watcher it will immediately "watch" for events and invoke the
139	callback when the event occurs (of course, only when the event model	155	callback when the event occurs (of course, only when the event model
140	is in control).	156	is in control).
141		157
		158	Note that B<callbacks must not permanently change global variables>
		159	potentially in use by the event loop (such as C<$_> or C<$[>) and that B<<
		160	callbacks must not C<die> >>. The former is good programming practise in
		161	Perl and the latter stems from the fact that exception handling differs
		162	widely between event loops.
		163
142	To disable the watcher you have to destroy it (e.g. by setting the	164	To disable the watcher you have to destroy it (e.g. by setting the
143	variable you store it in to C<undef> or otherwise deleting all references	165	variable you store it in to C<undef> or otherwise deleting all references
144	to it).	166	to it).
145		167
146	All watchers are created by calling a method on the C<AnyEvent> class.	168	All watchers are created by calling a method on the C<AnyEvent> class.
…		…
159	my variables are only visible after the statement in which they are	181	my variables are only visible after the statement in which they are
160	declared.	182	declared.
161		183
162	=head2 I/O WATCHERS	184	=head2 I/O WATCHERS
163		185
		186	$w = AnyEvent->io (
		187	fh => <filehandle_or_fileno>,
		188	poll => <"r" or "w">,
		189	cb => <callback>,
		190	);
		191
164	You can create an I/O watcher by calling the C<< AnyEvent->io >> method	192	You can create an I/O watcher by calling the C<< AnyEvent->io >> method
165	with the following mandatory key-value pairs as arguments:	193	with the following mandatory key-value pairs as arguments:
166		194
167	C<fh> the Perl I<file handle> (I<not> file descriptor) to watch for events	195	C<fh> is the Perl I<file handle> (or a naked file descriptor) to watch
168	(AnyEvent might or might not keep a reference to this file handle). C<poll>	196	for events (AnyEvent might or might not keep a reference to this file
		197	handle). Note that only file handles pointing to things for which
		198	non-blocking operation makes sense are allowed. This includes sockets,
		199	most character devices, pipes, fifos and so on, but not for example files
		200	or block devices.
		201
169	must be a string that is either C<r> or C<w>, which creates a watcher	202	C<poll> must be a string that is either C<r> or C<w>, which creates a
170	waiting for "r"eadable or "w"ritable events, respectively. C<cb> is the	203	watcher waiting for "r"eadable or "w"ritable events, respectively.
		204
171	callback to invoke each time the file handle becomes ready.	205	C<cb> is the callback to invoke each time the file handle becomes ready.
172		206
173	Although the callback might get passed parameters, their value and	207	Although the callback might get passed parameters, their value and
174	presence is undefined and you cannot rely on them. Portable AnyEvent	208	presence is undefined and you cannot rely on them. Portable AnyEvent
175	callbacks cannot use arguments passed to I/O watcher callbacks.	209	callbacks cannot use arguments passed to I/O watcher callbacks.
176		210
…		…
191	undef $w;	225	undef $w;
192	});	226	});
193		227
194	=head2 TIME WATCHERS	228	=head2 TIME WATCHERS
195		229
		230	$w = AnyEvent->timer (after => <seconds>, cb => <callback>);
		231
		232	$w = AnyEvent->timer (
		233	after => <fractional_seconds>,
		234	interval => <fractional_seconds>,
		235	cb => <callback>,
		236	);
		237
196	You can create a time watcher by calling the C<< AnyEvent->timer >>	238	You can create a time watcher by calling the C<< AnyEvent->timer >>
197	method with the following mandatory arguments:	239	method with the following mandatory arguments:
198		240
199	C<after> specifies after how many seconds (fractional values are	241	C<after> specifies after how many seconds (fractional values are
200	supported) the callback should be invoked. C<cb> is the callback to invoke	242	supported) the callback should be invoked. C<cb> is the callback to invoke
…		…
308	In either case, if you care (and in most cases, you don't), then you	350	In either case, if you care (and in most cases, you don't), then you
309	can get whatever behaviour you want with any event loop, by taking the	351	can get whatever behaviour you want with any event loop, by taking the
310	difference between C<< AnyEvent->time >> and C<< AnyEvent->now >> into	352	difference between C<< AnyEvent->time >> and C<< AnyEvent->now >> into
311	account.	353	account.
312		354
		355	=item AnyEvent->now_update
		356
		357	Some event loops (such as L<EV> or L<AnyEvent::Impl::Perl>) cache
		358	the current time for each loop iteration (see the discussion of L<<
		359	AnyEvent->now >>, above).
		360
		361	When a callback runs for a long time (or when the process sleeps), then
		362	this "current" time will differ substantially from the real time, which
		363	might affect timers and time-outs.
		364
		365	When this is the case, you can call this method, which will update the
		366	event loop's idea of "current time".
		367
		368	A typical example would be a script in a web server (e.g. C<mod_perl>) -
		369	when mod_perl executes the script, then the event loop will have the wrong
		370	idea about the "current time" (being potentially far in the past, when the
		371	script ran the last time). In that case you should arrange a call to C<<
		372	AnyEvent->now_update >> each time the web server process wakes up again
		373	(e.g. at the start of your script, or in a handler).
		374
		375	Note that updating the time I<might> cause some events to be handled.
		376
313	=back	377	=back
314		378
315	=head2 SIGNAL WATCHERS	379	=head2 SIGNAL WATCHERS
		380
		381	$w = AnyEvent->signal (signal => <uppercase_signal_name>, cb => <callback>);
316		382
317	You can watch for signals using a signal watcher, C<signal> is the signal	383	You can watch for signals using a signal watcher, C<signal> is the signal
318	I<name> in uppercase and without any C<SIG> prefix, C<cb> is the Perl	384	I<name> in uppercase and without any C<SIG> prefix, C<cb> is the Perl
319	callback to be invoked whenever a signal occurs.	385	callback to be invoked whenever a signal occurs.
320		386
…		…
326	invocation, and callback invocation will be synchronous. Synchronous means	392	invocation, and callback invocation will be synchronous. Synchronous means
327	that it might take a while until the signal gets handled by the process,	393	that it might take a while until the signal gets handled by the process,
328	but it is guaranteed not to interrupt any other callbacks.	394	but it is guaranteed not to interrupt any other callbacks.
329		395
330	The main advantage of using these watchers is that you can share a signal	396	The main advantage of using these watchers is that you can share a signal
331	between multiple watchers.	397	between multiple watchers, and AnyEvent will ensure that signals will not
		398	interrupt your program at bad times.
332		399
333	This watcher might use C<%SIG>, so programs overwriting those signals	400	This watcher might use C<%SIG> (depending on the event loop used),
334	directly will likely not work correctly.	401	so programs overwriting those signals directly will likely not work
		402	correctly.
335		403
336	Example: exit on SIGINT	404	Example: exit on SIGINT
337		405
338	my $w = AnyEvent->signal (signal => "INT", cb => sub { exit 1 });	406	my $w = AnyEvent->signal (signal => "INT", cb => sub { exit 1 });
339		407
		408	=head3 Signal Races, Delays and Workarounds
		409
		410	Many event loops (e.g. Glib, Tk, Qt, IO::Async) do not support attaching
		411	callbacks to signals in a generic way, which is a pity, as you cannot
		412	do race-free signal handling in perl, requiring C libraries for
		413	this. AnyEvent will try to do it's best, which means in some cases,
		414	signals will be delayed. The maximum time a signal might be delayed is
		415	specified in C<$AnyEvent::MAX_SIGNAL_LATENCY> (default: 10 seconds). This
		416	variable can be changed only before the first signal watcher is created,
		417	and should be left alone otherwise. This variable determines how often
		418	AnyEvent polls for signals (in case a wake-up was missed). Higher values
		419	will cause fewer spurious wake-ups, which is better for power and CPU
		420	saving.
		421
		422	All these problems can be avoided by installing the optional
		423	L<Async::Interrupt> module, which works with most event loops. It will not
		424	work with inherently broken event loops such as L<Event> or L<Event::Lib>
		425	(and not with L<POE> currently, as POE does it's own workaround with
		426	one-second latency). For those, you just have to suffer the delays.
		427
340	=head2 CHILD PROCESS WATCHERS	428	=head2 CHILD PROCESS WATCHERS
341		429
		430	$w = AnyEvent->child (pid => <process id>, cb => <callback>);
		431
342	You can also watch on a child process exit and catch its exit status.	432	You can also watch on a child process exit and catch its exit status.
343		433
344	The child process is specified by the C<pid> argument (if set to C<0>, it	434	The child process is specified by the C<pid> argument (one some backends,
345	watches for any child process exit). The watcher will trigger as often	435	using C<0> watches for any child process exit, on others this will
346	as status change for the child are received. This works by installing a	436	croak). The watcher will be triggered only when the child process has
347	signal handler for C<SIGCHLD>. The callback will be called with the pid	437	finished and an exit status is available, not on any trace events
348	and exit status (as returned by waitpid), so unlike other watcher types,	438	(stopped/continued).
349	you I<can> rely on child watcher callback arguments.	439
		440	The callback will be called with the pid and exit status (as returned by
		441	waitpid), so unlike other watcher types, you I<can> rely on child watcher
		442	callback arguments.
		443
		444	This watcher type works by installing a signal handler for C<SIGCHLD>,
		445	and since it cannot be shared, nothing else should use SIGCHLD or reap
		446	random child processes (waiting for specific child processes, e.g. inside
		447	C<system>, is just fine).
350		448
351	There is a slight catch to child watchers, however: you usually start them	449	There is a slight catch to child watchers, however: you usually start them
352	I<after> the child process was created, and this means the process could	450	I<after> the child process was created, and this means the process could
353	have exited already (and no SIGCHLD will be sent anymore).	451	have exited already (and no SIGCHLD will be sent anymore).
354		452
355	Not all event models handle this correctly (POE doesn't), but even for	453	Not all event models handle this correctly (neither POE nor IO::Async do,
		454	see their AnyEvent::Impl manpages for details), but even for event models
356	event models that I<do> handle this correctly, they usually need to be	455	that I<do> handle this correctly, they usually need to be loaded before
357	loaded before the process exits (i.e. before you fork in the first place).	456	the process exits (i.e. before you fork in the first place). AnyEvent's
		457	pure perl event loop handles all cases correctly regardless of when you
		458	start the watcher.
358		459
359	This means you cannot create a child watcher as the very first thing in an	460	This means you cannot create a child watcher as the very first
360	AnyEvent program, you I<have> to create at least one watcher before you	461	thing in an AnyEvent program, you I<have> to create at least one
361	C<fork> the child (alternatively, you can call C<AnyEvent::detect>).	462	watcher before you C<fork> the child (alternatively, you can call
		463	C<AnyEvent::detect>).
		464
		465	As most event loops do not support waiting for child events, they will be
		466	emulated by AnyEvent in most cases, in which the latency and race problems
		467	mentioned in the description of signal watchers apply.
362		468
363	Example: fork a process and wait for it	469	Example: fork a process and wait for it
364		470
365	my $done = AnyEvent->condvar;	471	my $done = AnyEvent->condvar;
366		472
…		…
376	);	482	);
377		483
378	# do something else, then wait for process exit	484	# do something else, then wait for process exit
379	$done->recv;	485	$done->recv;
380		486
		487	=head2 IDLE WATCHERS
		488
		489	$w = AnyEvent->idle (cb => <callback>);
		490
		491	Sometimes there is a need to do something, but it is not so important
		492	to do it instantly, but only when there is nothing better to do. This
		493	"nothing better to do" is usually defined to be "no other events need
		494	attention by the event loop".
		495
		496	Idle watchers ideally get invoked when the event loop has nothing
		497	better to do, just before it would block the process to wait for new
		498	events. Instead of blocking, the idle watcher is invoked.
		499
		500	Most event loops unfortunately do not really support idle watchers (only
		501	EV, Event and Glib do it in a usable fashion) - for the rest, AnyEvent
		502	will simply call the callback "from time to time".
		503
		504	Example: read lines from STDIN, but only process them when the
		505	program is otherwise idle:
		506
		507	my @lines; # read data
		508	my $idle_w;
		509	my $io_w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {
		510	push @lines, scalar <STDIN>;
		511
		512	# start an idle watcher, if not already done
		513	$idle_w ||= AnyEvent->idle (cb => sub {
		514	# handle only one line, when there are lines left
		515	if (my $line = shift @lines) {
		516	print "handled when idle: $line";
		517	} else {
		518	# otherwise disable the idle watcher again
		519	undef $idle_w;
		520	}
		521	});
		522	});
		523
381	=head2 CONDITION VARIABLES	524	=head2 CONDITION VARIABLES
		525
		526	$cv = AnyEvent->condvar;
		527
		528	$cv->send (<list>);
		529	my @res = $cv->recv;
382		530
383	If you are familiar with some event loops you will know that all of them	531	If you are familiar with some event loops you will know that all of them
384	require you to run some blocking "loop", "run" or similar function that	532	require you to run some blocking "loop", "run" or similar function that
385	will actively watch for new events and call your callbacks.	533	will actively watch for new events and call your callbacks.
386		534
387	AnyEvent is different, it expects somebody else to run the event loop and	535	AnyEvent is slightly different: it expects somebody else to run the event
388	will only block when necessary (usually when told by the user).	536	loop and will only block when necessary (usually when told by the user).
389		537
390	The instrument to do that is called a "condition variable", so called	538	The instrument to do that is called a "condition variable", so called
391	because they represent a condition that must become true.	539	because they represent a condition that must become true.
392		540
		541	Now is probably a good time to look at the examples further below.
		542
393	Condition variables can be created by calling the C<< AnyEvent->condvar	543	Condition variables can be created by calling the C<< AnyEvent->condvar
394
395	>> method, usually without arguments. The only argument pair allowed is	544	>> method, usually without arguments. The only argument pair allowed is
396
397	C<cb>, which specifies a callback to be called when the condition variable	545	C<cb>, which specifies a callback to be called when the condition variable
398	becomes true, with the condition variable as the first argument (but not	546	becomes true, with the condition variable as the first argument (but not
399	the results).	547	the results).
400		548
401	After creation, the condition variable is "false" until it becomes "true"	549	After creation, the condition variable is "false" until it becomes "true"
…		…
406	Condition variables are similar to callbacks, except that you can	554	Condition variables are similar to callbacks, except that you can
407	optionally wait for them. They can also be called merge points - points	555	optionally wait for them. They can also be called merge points - points
408	in time where multiple outstanding events have been processed. And yet	556	in time where multiple outstanding events have been processed. And yet
409	another way to call them is transactions - each condition variable can be	557	another way to call them is transactions - each condition variable can be
410	used to represent a transaction, which finishes at some point and delivers	558	used to represent a transaction, which finishes at some point and delivers
411	a result.	559	a result. And yet some people know them as "futures" - a promise to
		560	compute/deliver something that you can wait for.
412		561
413	Condition variables are very useful to signal that something has finished,	562	Condition variables are very useful to signal that something has finished,
414	for example, if you write a module that does asynchronous http requests,	563	for example, if you write a module that does asynchronous http requests,
415	then a condition variable would be the ideal candidate to signal the	564	then a condition variable would be the ideal candidate to signal the
416	availability of results. The user can either act when the callback is	565	availability of results. The user can either act when the callback is
…		…
450	after => 1,	599	after => 1,
451	cb => sub { $result_ready->send },	600	cb => sub { $result_ready->send },
452	);	601	);
453		602
454	# this "blocks" (while handling events) till the callback	603	# this "blocks" (while handling events) till the callback
455	# calls send	604	# calls ->send
456	$result_ready->recv;	605	$result_ready->recv;
457		606
458	Example: wait for a timer, but take advantage of the fact that	607	Example: wait for a timer, but take advantage of the fact that condition
459	condition variables are also code references.	608	variables are also callable directly.
460		609
461	my $done = AnyEvent->condvar;	610	my $done = AnyEvent->condvar;
462	my $delay = AnyEvent->timer (after => 5, cb => $done);	611	my $delay = AnyEvent->timer (after => 5, cb => $done);
463	$done->recv;	612	$done->recv;
464		613
…		…
470		619
471	...	620	...
472		621
473	my @info = $couchdb->info->recv;	622	my @info = $couchdb->info->recv;
474		623
475	And this is how you would just ste a callback to be called whenever the	624	And this is how you would just set a callback to be called whenever the
476	results are available:	625	results are available:
477		626
478	$couchdb->info->cb (sub {	627	$couchdb->info->cb (sub {
479	my @info = $_[0]->recv;	628	my @info = $_[0]->recv;
480	});	629	});
…		…
498	immediately from within send.	647	immediately from within send.
499		648
500	Any arguments passed to the C<send> call will be returned by all	649	Any arguments passed to the C<send> call will be returned by all
501	future C<< ->recv >> calls.	650	future C<< ->recv >> calls.
502		651
503	Condition variables are overloaded so one can call them directly	652	Condition variables are overloaded so one can call them directly (as if
504	(as a code reference). Calling them directly is the same as calling	653	they were a code reference). Calling them directly is the same as calling
505	C<send>. Note, however, that many C-based event loops do not handle	654	C<send>.
506	overloading, so as tempting as it may be, passing a condition variable
507	instead of a callback does not work. Both the pure perl and EV loops
508	support overloading, however, as well as all functions that use perl to
509	invoke a callback (as in L<AnyEvent::Socket> and L<AnyEvent::DNS> for
510	example).
511		655
512	=item $cv->croak ($error)	656	=item $cv->croak ($error)
513		657
514	Similar to send, but causes all call's to C<< ->recv >> to invoke	658	Similar to send, but causes all call's to C<< ->recv >> to invoke
515	C<Carp::croak> with the given error message/object/scalar.	659	C<Carp::croak> with the given error message/object/scalar.
516		660
517	This can be used to signal any errors to the condition variable	661	This can be used to signal any errors to the condition variable
518	user/consumer.	662	user/consumer. Doing it this way instead of calling C<croak> directly
		663	delays the error detetcion, but has the overwhelmign advantage that it
		664	diagnoses the error at the place where the result is expected, and not
		665	deep in some event clalback without connection to the actual code causing
		666	the problem.
519		667
520	=item $cv->begin ([group callback])	668	=item $cv->begin ([group callback])
521		669
522	=item $cv->end	670	=item $cv->end
523
524	These two methods are EXPERIMENTAL and MIGHT CHANGE.
525		671
526	These two methods can be used to combine many transactions/events into	672	These two methods can be used to combine many transactions/events into
527	one. For example, a function that pings many hosts in parallel might want	673	one. For example, a function that pings many hosts in parallel might want
528	to use a condition variable for the whole process.	674	to use a condition variable for the whole process.
529		675
530	Every call to C<< ->begin >> will increment a counter, and every call to	676	Every call to C<< ->begin >> will increment a counter, and every call to
531	C<< ->end >> will decrement it. If the counter reaches C<0> in C<< ->end	677	C<< ->end >> will decrement it. If the counter reaches C<0> in C<< ->end
532	>>, the (last) callback passed to C<begin> will be executed. That callback	678	>>, the (last) callback passed to C<begin> will be executed, passing the
533	is I<supposed> to call C<< ->send >>, but that is not required. If no	679	condvar as first argument. That callback is I<supposed> to call C<< ->send
534	callback was set, C<send> will be called without any arguments.	680	>>, but that is not required. If no group callback was set, C<send> will
		681	be called without any arguments.
535		682
536	Let's clarify this with the ping example:	683	You can think of C<< $cv->send >> giving you an OR condition (one call
		684	sends), while C<< $cv->begin >> and C<< $cv->end >> giving you an AND
		685	condition (all C<begin> calls must be C<end>'ed before the condvar sends).
		686
		687	Let's start with a simple example: you have two I/O watchers (for example,
		688	STDOUT and STDERR for a program), and you want to wait for both streams to
		689	close before activating a condvar:
537		690
538	my $cv = AnyEvent->condvar;	691	my $cv = AnyEvent->condvar;
539		692
		693	$cv->begin; # first watcher
		694	my $w1 = AnyEvent->io (fh => $fh1, cb => sub {
		695	defined sysread $fh1, my $buf, 4096
		696	or $cv->end;
		697	});
		698
		699	$cv->begin; # second watcher
		700	my $w2 = AnyEvent->io (fh => $fh2, cb => sub {
		701	defined sysread $fh2, my $buf, 4096
		702	or $cv->end;
		703	});
		704
		705	$cv->recv;
		706
		707	This works because for every event source (EOF on file handle), there is
		708	one call to C<begin>, so the condvar waits for all calls to C<end> before
		709	sending.
		710
		711	The ping example mentioned above is slightly more complicated, as the
		712	there are results to be passwd back, and the number of tasks that are
		713	begung can potentially be zero:
		714
		715	my $cv = AnyEvent->condvar;
		716
540	my %result;	717	my %result;
541	$cv->begin (sub { $cv->send (\%result) });	718	$cv->begin (sub { shift->send (\%result) });
542		719
543	for my $host (@list_of_hosts) {	720	for my $host (@list_of_hosts) {
544	$cv->begin;	721	$cv->begin;
545	ping_host_then_call_callback $host, sub {	722	ping_host_then_call_callback $host, sub {
546	$result{$host} = ...;	723	$result{$host} = ...;
…		…
561	loop, which serves two important purposes: first, it sets the callback	738	loop, which serves two important purposes: first, it sets the callback
562	to be called once the counter reaches C<0>, and second, it ensures that	739	to be called once the counter reaches C<0>, and second, it ensures that
563	C<send> is called even when C<no> hosts are being pinged (the loop	740	C<send> is called even when C<no> hosts are being pinged (the loop
564	doesn't execute once).	741	doesn't execute once).
565		742
566	This is the general pattern when you "fan out" into multiple subrequests:	743	This is the general pattern when you "fan out" into multiple (but
567	use an outer C<begin>/C<end> pair to set the callback and ensure C<end>	744	potentially none) subrequests: use an outer C<begin>/C<end> pair to set
568	is called at least once, and then, for each subrequest you start, call	745	the callback and ensure C<end> is called at least once, and then, for each
569	C<begin> and for each subrequest you finish, call C<end>.	746	subrequest you start, call C<begin> and for each subrequest you finish,
		747	call C<end>.
570		748
571	=back	749	=back
572		750
573	=head3 METHODS FOR CONSUMERS	751	=head3 METHODS FOR CONSUMERS
574		752
…		…
590	function will call C<croak>.	768	function will call C<croak>.
591		769
592	In list context, all parameters passed to C<send> will be returned,	770	In list context, all parameters passed to C<send> will be returned,
593	in scalar context only the first one will be returned.	771	in scalar context only the first one will be returned.
594		772
		773	Note that doing a blocking wait in a callback is not supported by any
		774	event loop, that is, recursive invocation of a blocking C<< ->recv
		775	>> is not allowed, and the C<recv> call will C<croak> if such a
		776	condition is detected. This condition can be slightly loosened by using
		777	L<Coro::AnyEvent>, which allows you to do a blocking C<< ->recv >> from
		778	any thread that doesn't run the event loop itself.
		779
595	Not all event models support a blocking wait - some die in that case	780	Not all event models support a blocking wait - some die in that case
596	(programs might want to do that to stay interactive), so I<if you are	781	(programs might want to do that to stay interactive), so I<if you are
597	using this from a module, never require a blocking wait>, but let the	782	using this from a module, never require a blocking wait>. Instead, let the
598	caller decide whether the call will block or not (for example, by coupling	783	caller decide whether the call will block or not (for example, by coupling
599	condition variables with some kind of request results and supporting	784	condition variables with some kind of request results and supporting
600	callbacks so the caller knows that getting the result will not block,	785	callbacks so the caller knows that getting the result will not block,
601	while still supporting blocking waits if the caller so desires).	786	while still supporting blocking waits if the caller so desires).
602		787
603	Another reason I<never> to C<< ->recv >> in a module is that you cannot
604	sensibly have two C<< ->recv >>'s in parallel, as that would require
605	multiple interpreters or coroutines/threads, none of which C<AnyEvent>
606	can supply.
607
608	The L<Coro> module, however, I<can> and I<does> supply coroutines and, in
609	fact, L<Coro::AnyEvent> replaces AnyEvent's condvars by coroutine-safe
610	versions and also integrates coroutines into AnyEvent, making blocking
611	C<< ->recv >> calls perfectly safe as long as they are done from another
612	coroutine (one that doesn't run the event loop).
613
614	You can ensure that C<< -recv >> never blocks by setting a callback and	788	You can ensure that C<< -recv >> never blocks by setting a callback and
615	only calling C<< ->recv >> from within that callback (or at a later	789	only calling C<< ->recv >> from within that callback (or at a later
616	time). This will work even when the event loop does not support blocking	790	time). This will work even when the event loop does not support blocking
617	waits otherwise.	791	waits otherwise.
618		792
…		…
624	=item $cb = $cv->cb ($cb->($cv))	798	=item $cb = $cv->cb ($cb->($cv))
625		799
626	This is a mutator function that returns the callback set and optionally	800	This is a mutator function that returns the callback set and optionally
627	replaces it before doing so.	801	replaces it before doing so.
628		802
629	The callback will be called when the condition becomes "true", i.e. when	803	The callback will be called when the condition becomes (or already was)
630	C<send> or C<croak> are called, with the only argument being the condition	804	"true", i.e. when C<send> or C<croak> are called (or were called), with
631	variable itself. Calling C<recv> inside the callback or at any later time	805	the only argument being the condition variable itself. Calling C<recv>
632	is guaranteed not to block.	806	inside the callback or at any later time is guaranteed not to block.
633		807
634	=back	808	=back
635		809
		810	=head1 SUPPORTED EVENT LOOPS/BACKENDS
		811
		812	The available backend classes are (every class has its own manpage):
		813
		814	=over 4
		815
		816	=item Backends that are autoprobed when no other event loop can be found.
		817
		818	EV is the preferred backend when no other event loop seems to be in
		819	use. If EV is not installed, then AnyEvent will fall back to its own
		820	pure-perl implementation, which is available everywhere as it comes with
		821	AnyEvent itself.
		822
		823	AnyEvent::Impl::EV based on EV (interface to libev, best choice).
		824	AnyEvent::Impl::Perl pure-perl implementation, fast and portable.
		825
		826	=item Backends that are transparently being picked up when they are used.
		827
		828	These will be used when they are currently loaded when the first watcher
		829	is created, in which case it is assumed that the application is using
		830	them. This means that AnyEvent will automatically pick the right backend
		831	when the main program loads an event module before anything starts to
		832	create watchers. Nothing special needs to be done by the main program.
		833
		834	AnyEvent::Impl::Event based on Event, very stable, few glitches.
		835	AnyEvent::Impl::Glib based on Glib, slow but very stable.
		836	AnyEvent::Impl::Tk based on Tk, very broken.
		837	AnyEvent::Impl::EventLib based on Event::Lib, leaks memory and worse.
		838	AnyEvent::Impl::POE based on POE, very slow, some limitations.
		839	AnyEvent::Impl::Irssi used when running within irssi.
		840
		841	=item Backends with special needs.
		842
		843	Qt requires the Qt::Application to be instantiated first, but will
		844	otherwise be picked up automatically. As long as the main program
		845	instantiates the application before any AnyEvent watchers are created,
		846	everything should just work.
		847
		848	AnyEvent::Impl::Qt based on Qt.
		849
		850	Support for IO::Async can only be partial, as it is too broken and
		851	architecturally limited to even support the AnyEvent API. It also
		852	is the only event loop that needs the loop to be set explicitly, so
		853	it can only be used by a main program knowing about AnyEvent. See
		854	L<AnyEvent::Impl::Async> for the gory details.
		855
		856	AnyEvent::Impl::IOAsync based on IO::Async, cannot be autoprobed.
		857
		858	=item Event loops that are indirectly supported via other backends.
		859
		860	Some event loops can be supported via other modules:
		861
		862	There is no direct support for WxWidgets (L<Wx>) or L<Prima>.
		863
		864	B<WxWidgets> has no support for watching file handles. However, you can
		865	use WxWidgets through the POE adaptor, as POE has a Wx backend that simply
		866	polls 20 times per second, which was considered to be too horrible to even
		867	consider for AnyEvent.
		868
		869	B<Prima> is not supported as nobody seems to be using it, but it has a POE
		870	backend, so it can be supported through POE.
		871
		872	AnyEvent knows about both L<Prima> and L<Wx>, however, and will try to
		873	load L<POE> when detecting them, in the hope that POE will pick them up,
		874	in which case everything will be automatic.
		875
		876	=back
		877
636	=head1 GLOBAL VARIABLES AND FUNCTIONS	878	=head1 GLOBAL VARIABLES AND FUNCTIONS
637		879
		880	These are not normally required to use AnyEvent, but can be useful to
		881	write AnyEvent extension modules.
		882
638	=over 4	883	=over 4
639		884
640	=item $AnyEvent::MODEL	885	=item $AnyEvent::MODEL
641		886
642	Contains C<undef> until the first watcher is being created. Then it	887	Contains C<undef> until the first watcher is being created, before the
		888	backend has been autodetected.
		889
643	contains the event model that is being used, which is the name of the	890	Afterwards it contains the event model that is being used, which is the
644	Perl class implementing the model. This class is usually one of the	891	name of the Perl class implementing the model. This class is usually one
645	C<AnyEvent::Impl:xxx> modules, but can be any other class in the case	892	of the C<AnyEvent::Impl:xxx> modules, but can be any other class in the
646	AnyEvent has been extended at runtime (e.g. in I<rxvt-unicode>).	893	case AnyEvent has been extended at runtime (e.g. in I<rxvt-unicode> it
647		894	will be C<urxvt::anyevent>).
648	The known classes so far are:
649
650	AnyEvent::Impl::EV based on EV (an interface to libev, best choice).
651	AnyEvent::Impl::Event based on Event, second best choice.
652	AnyEvent::Impl::Perl pure-perl implementation, fast and portable.
653	AnyEvent::Impl::Glib based on Glib, third-best choice.
654	AnyEvent::Impl::Tk based on Tk, very bad choice.
655	AnyEvent::Impl::Qt based on Qt, cannot be autoprobed (see its docs).
656	AnyEvent::Impl::EventLib based on Event::Lib, leaks memory and worse.
657	AnyEvent::Impl::POE based on POE, not generic enough for full support.
658
659	There is no support for WxWidgets, as WxWidgets has no support for
660	watching file handles. However, you can use WxWidgets through the
661	POE Adaptor, as POE has a Wx backend that simply polls 20 times per
662	second, which was considered to be too horrible to even consider for
663	AnyEvent. Likewise, other POE backends can be used by AnyEvent by using
664	it's adaptor.
665
666	AnyEvent knows about L<Prima> and L<Wx> and will try to use L<POE> when
667	autodetecting them.
668		895
669	=item AnyEvent::detect	896	=item AnyEvent::detect
670		897
671	Returns C<$AnyEvent::MODEL>, forcing autodetection of the event model	898	Returns C<$AnyEvent::MODEL>, forcing autodetection of the event model
672	if necessary. You should only call this function right before you would	899	if necessary. You should only call this function right before you would
673	have created an AnyEvent watcher anyway, that is, as late as possible at	900	have created an AnyEvent watcher anyway, that is, as late as possible at
674	runtime.	901	runtime, and not e.g. while initialising of your module.
		902
		903	If you need to do some initialisation before AnyEvent watchers are
		904	created, use C<post_detect>.
675		905
676	=item $guard = AnyEvent::post_detect { BLOCK }	906	=item $guard = AnyEvent::post_detect { BLOCK }
677		907
678	Arranges for the code block to be executed as soon as the event model is	908	Arranges for the code block to be executed as soon as the event model is
679	autodetected (or immediately if this has already happened).	909	autodetected (or immediately if this has already happened).
680		910
		911	The block will be executed I<after> the actual backend has been detected
		912	(C<$AnyEvent::MODEL> is set), but I<before> any watchers have been
		913	created, so it is possible to e.g. patch C<@AnyEvent::ISA> or do
		914	other initialisations - see the sources of L<AnyEvent::Strict> or
		915	L<AnyEvent::AIO> to see how this is used.
		916
		917	The most common usage is to create some global watchers, without forcing
		918	event module detection too early, for example, L<AnyEvent::AIO> creates
		919	and installs the global L<IO::AIO> watcher in a C<post_detect> block to
		920	avoid autodetecting the event module at load time.
		921
681	If called in scalar or list context, then it creates and returns an object	922	If called in scalar or list context, then it creates and returns an object
682	that automatically removes the callback again when it is destroyed. See	923	that automatically removes the callback again when it is destroyed (or
		924	C<undef> when the hook was immediately executed). See L<AnyEvent::AIO> for
683	L<Coro::BDB> for a case where this is useful.	925	a case where this is useful.
		926
		927	Example: Create a watcher for the IO::AIO module and store it in
		928	C<$WATCHER>. Only do so after the event loop is initialised, though.
		929
		930	our WATCHER;
		931
		932	my $guard = AnyEvent::post_detect {
		933	$WATCHER = AnyEvent->io (fh => IO::AIO::poll_fileno, poll => 'r', cb => \&IO::AIO::poll_cb);
		934	};
		935
		936	# the ||= is important in case post_detect immediately runs the block,
		937	# as to not clobber the newly-created watcher. assigning both watcher and
		938	# post_detect guard to the same variable has the advantage of users being
		939	# able to just C<undef $WATCHER> if the watcher causes them grief.
		940
		941	$WATCHER ||= $guard;
684		942
685	=item @AnyEvent::post_detect	943	=item @AnyEvent::post_detect
686		944
687	If there are any code references in this array (you can C<push> to it	945	If there are any code references in this array (you can C<push> to it
688	before or after loading AnyEvent), then they will called directly after	946	before or after loading AnyEvent), then they will called directly after
689	the event loop has been chosen.	947	the event loop has been chosen.
690		948
691	You should check C<$AnyEvent::MODEL> before adding to this array, though:	949	You should check C<$AnyEvent::MODEL> before adding to this array, though:
692	if it contains a true value then the event loop has already been detected,	950	if it is defined then the event loop has already been detected, and the
693	and the array will be ignored.	951	array will be ignored.
694		952
695	Best use C<AnyEvent::post_detect { BLOCK }> instead.	953	Best use C<AnyEvent::post_detect { BLOCK }> when your application allows
		954	it,as it takes care of these details.
		955
		956	This variable is mainly useful for modules that can do something useful
		957	when AnyEvent is used and thus want to know when it is initialised, but do
		958	not need to even load it by default. This array provides the means to hook
		959	into AnyEvent passively, without loading it.
696		960
697	=back	961	=back
698		962
699	=head1 WHAT TO DO IN A MODULE	963	=head1 WHAT TO DO IN A MODULE
700		964
…		…
755		1019
756		1020
757	=head1 OTHER MODULES	1021	=head1 OTHER MODULES
758		1022
759	The following is a non-exhaustive list of additional modules that use	1023	The following is a non-exhaustive list of additional modules that use
760	AnyEvent and can therefore be mixed easily with other AnyEvent modules	1024	AnyEvent as a client and can therefore be mixed easily with other AnyEvent
761	in the same program. Some of the modules come with AnyEvent, some are	1025	modules and other event loops in the same program. Some of the modules
762	available via CPAN.	1026	come with AnyEvent, most are available via CPAN.
763		1027
764	=over 4	1028	=over 4
765		1029
766	=item L<AnyEvent::Util>	1030	=item L<AnyEvent::Util>
767		1031
…		…
776		1040
777	=item L<AnyEvent::Handle>	1041	=item L<AnyEvent::Handle>
778		1042
779	Provide read and write buffers, manages watchers for reads and writes,	1043	Provide read and write buffers, manages watchers for reads and writes,
780	supports raw and formatted I/O, I/O queued and fully transparent and	1044	supports raw and formatted I/O, I/O queued and fully transparent and
781	non-blocking SSL/TLS.	1045	non-blocking SSL/TLS (via L<AnyEvent::TLS>.
782		1046
783	=item L<AnyEvent::DNS>	1047	=item L<AnyEvent::DNS>
784		1048
785	Provides rich asynchronous DNS resolver capabilities.	1049	Provides rich asynchronous DNS resolver capabilities.
786		1050
…		…
814		1078
815	=item L<AnyEvent::GPSD>	1079	=item L<AnyEvent::GPSD>
816		1080
817	A non-blocking interface to gpsd, a daemon delivering GPS information.	1081	A non-blocking interface to gpsd, a daemon delivering GPS information.
818		1082
		1083	=item L<AnyEvent::IRC>
		1084
		1085	AnyEvent based IRC client module family (replacing the older Net::IRC3).
		1086
		1087	=item L<AnyEvent::XMPP>
		1088
		1089	AnyEvent based XMPP (Jabber protocol) module family (replacing the older
		1090	Net::XMPP2>.
		1091
819	=item L<AnyEvent::IGS>	1092	=item L<AnyEvent::IGS>
820		1093
821	A non-blocking interface to the Internet Go Server protocol (used by	1094	A non-blocking interface to the Internet Go Server protocol (used by
822	L<App::IGS>).	1095	L<App::IGS>).
823		1096
824	=item L<Net::IRC3>
825
826	AnyEvent based IRC client module family.
827
828	=item L<Net::XMPP2>
829
830	AnyEvent based XMPP (Jabber protocol) module family.
831
832	=item L<Net::FCP>	1097	=item L<Net::FCP>
833		1098
834	AnyEvent-based implementation of the Freenet Client Protocol, birthplace	1099	AnyEvent-based implementation of the Freenet Client Protocol, birthplace
835	of AnyEvent.	1100	of AnyEvent.
836		1101
…		…
840		1105
841	=item L<Coro>	1106	=item L<Coro>
842		1107
843	Has special support for AnyEvent via L<Coro::AnyEvent>.	1108	Has special support for AnyEvent via L<Coro::AnyEvent>.
844		1109
845	=item L<IO::Lambda>
846
847	The lambda approach to I/O - don't ask, look there. Can use AnyEvent.
848
849	=back	1110	=back
850		1111
851	=cut	1112	=cut
852		1113
853	package AnyEvent;	1114	package AnyEvent;
854		1115
855	no warnings;	1116	# basically a tuned-down version of common::sense
856	use strict;	1117	sub common_sense {
		1118	# from common:.sense 1.0
		1119	${^WARNING_BITS} = "\xfc\x3f\xf3\x00\x0f\xf3\xcf\xc0\xf3\xfc\x33\x03";
		1120	# use strict vars subs
		1121	$^H |= 0x00000600;
		1122	}
857		1123
		1124	BEGIN { AnyEvent::common_sense }
		1125
858	use Carp;	1126	use Carp ();
859		1127
860	our $VERSION = 4.22;	1128	our $VERSION = '5.21';
861	our $MODEL;	1129	our $MODEL;
862		1130
863	our $AUTOLOAD;	1131	our $AUTOLOAD;
864	our @ISA;	1132	our @ISA;
865		1133
866	our @REGISTRY;	1134	our @REGISTRY;
867		1135
868	our $WIN32;	1136	our $VERBOSE;
869		1137
870	BEGIN {	1138	BEGIN {
871	my $win32 = ! ! ($^O =~ /mswin32/i);	1139	eval "sub WIN32(){ " . (($^O =~ /mswin32/i)*1) ." }";
872	eval "sub WIN32(){ $win32 }";	1140	eval "sub TAINT(){ " . (${^TAINT}*1) . " }";
873	}
874		1141
		1142	delete @ENV{grep /^PERL_ANYEVENT_/, keys %ENV}
		1143	if ${^TAINT};
		1144
875	our $verbose = $ENV{PERL_ANYEVENT_VERBOSE}*1;	1145	$VERBOSE = $ENV{PERL_ANYEVENT_VERBOSE}*1;
		1146
		1147	}
		1148
		1149	our $MAX_SIGNAL_LATENCY = 10;
876		1150
877	our %PROTOCOL; # (ipv4|ipv6) => (1|2), higher numbers are preferred	1151	our %PROTOCOL; # (ipv4|ipv6) => (1|2), higher numbers are preferred
878		1152
879	{	1153	{
880	my $idx;	1154	my $idx;
…		…
882	for reverse split /\s*,\s*/,	1156	for reverse split /\s*,\s*/,
883	$ENV{PERL_ANYEVENT_PROTOCOLS} || "ipv4,ipv6";	1157	$ENV{PERL_ANYEVENT_PROTOCOLS} || "ipv4,ipv6";
884	}	1158	}
885		1159
886	my @models = (	1160	my @models = (
887	[EV:: => AnyEvent::Impl::EV::],	1161	[EV:: => AnyEvent::Impl::EV:: , 1],
888	[Event:: => AnyEvent::Impl::Event::],
889	[AnyEvent::Impl::Perl:: => AnyEvent::Impl::Perl::],	1162	[AnyEvent::Impl::Perl:: => AnyEvent::Impl::Perl:: , 1],
890	# everything below here will not be autoprobed	1163	# everything below here will not (normally) be autoprobed
891	# as the pureperl backend should work everywhere	1164	# as the pureperl backend should work everywhere
892	# and is usually faster	1165	# and is usually faster
		1166	[Event:: => AnyEvent::Impl::Event::, 1],
		1167	[Glib:: => AnyEvent::Impl::Glib:: , 1], # becomes extremely slow with many watchers
		1168	[Event::Lib:: => AnyEvent::Impl::EventLib::], # too buggy
		1169	[Irssi:: => AnyEvent::Impl::Irssi::], # Irssi has a bogus "Event" package
893	[Tk:: => AnyEvent::Impl::Tk::], # crashes with many handles	1170	[Tk:: => AnyEvent::Impl::Tk::], # crashes with many handles
894	[Glib:: => AnyEvent::Impl::Glib::], # becomes extremely slow with many watchers
895	[Event::Lib:: => AnyEvent::Impl::EventLib::], # too buggy
896	[Qt:: => AnyEvent::Impl::Qt::], # requires special main program	1171	[Qt:: => AnyEvent::Impl::Qt::], # requires special main program
897	[POE::Kernel:: => AnyEvent::Impl::POE::], # lasciate ogni speranza	1172	[POE::Kernel:: => AnyEvent::Impl::POE::], # lasciate ogni speranza
898	[Wx:: => AnyEvent::Impl::POE::],	1173	[Wx:: => AnyEvent::Impl::POE::],
899	[Prima:: => AnyEvent::Impl::POE::],	1174	[Prima:: => AnyEvent::Impl::POE::],
		1175	# IO::Async is just too broken - we would need workarounds for its
		1176	# byzantine signal and broken child handling, among others.
		1177	# IO::Async is rather hard to detect, as it doesn't have any
		1178	# obvious default class.
		1179	[IO::Async:: => AnyEvent::Impl::IOAsync::], # requires special main program
		1180	[IO::Async::Loop:: => AnyEvent::Impl::IOAsync::], # requires special main program
		1181	[IO::Async::Notifier:: => AnyEvent::Impl::IOAsync::], # requires special main program
		1182	[AnyEvent::Impl::IOAsync:: => AnyEvent::Impl::IOAsync::], # requires special main program
900	);	1183	);
901		1184
902	our %method = map +($_ => 1), qw(io timer time now signal child condvar one_event DESTROY);	1185	our %method = map +($_ => 1),
		1186	qw(io timer time now now_update signal child idle condvar one_event DESTROY);
903		1187
904	our @post_detect;	1188	our @post_detect;
905		1189
906	sub post_detect(&) {	1190	sub post_detect(&) {
907	my ($cb) = @_;	1191	my ($cb) = @_;
908		1192
909	if ($MODEL) {	1193	if ($MODEL) {
910	$cb->();	1194	$cb->();
911		1195
912	1	1196	undef
913	} else {	1197	} else {
914	push @post_detect, $cb;	1198	push @post_detect, $cb;
915		1199
916	defined wantarray	1200	defined wantarray
917	? bless \$cb, "AnyEvent::Util::PostDetect"	1201	? bless \$cb, "AnyEvent::Util::postdetect"
918	: ()	1202	: ()
919	}	1203	}
920	}	1204	}
921		1205
922	sub AnyEvent::Util::PostDetect::DESTROY {	1206	sub AnyEvent::Util::postdetect::DESTROY {
923	@post_detect = grep $_ != ${$_[0]}, @post_detect;	1207	@post_detect = grep $_ != ${$_[0]}, @post_detect;
924	}	1208	}
925		1209
926	sub detect() {	1210	sub detect() {
927	unless ($MODEL) {	1211	unless ($MODEL) {
928	no strict 'refs';
929	local $SIG{__DIE__};	1212	local $SIG{__DIE__};
930		1213
931	if ($ENV{PERL_ANYEVENT_MODEL} =~ /^([a-zA-Z]+)$/) {	1214	if ($ENV{PERL_ANYEVENT_MODEL} =~ /^([a-zA-Z]+)$/) {
932	my $model = "AnyEvent::Impl::$1";	1215	my $model = "AnyEvent::Impl::$1";
933	if (eval "require $model") {	1216	if (eval "require $model") {
934	$MODEL = $model;	1217	$MODEL = $model;
935	warn "AnyEvent: loaded model '$model' (forced by \$PERL_ANYEVENT_MODEL), using it.\n" if $verbose > 1;	1218	warn "AnyEvent: loaded model '$model' (forced by \$ENV{PERL_ANYEVENT_MODEL}), using it.\n" if $VERBOSE >= 2;
936	} else {	1219	} else {
937	warn "AnyEvent: unable to load model '$model' (from \$PERL_ANYEVENT_MODEL):\n$@" if $verbose;	1220	warn "AnyEvent: unable to load model '$model' (from \$ENV{PERL_ANYEVENT_MODEL}):\n$@" if $VERBOSE;
938	}	1221	}
939	}	1222	}
940		1223
941	# check for already loaded models	1224	# check for already loaded models
942	unless ($MODEL) {	1225	unless ($MODEL) {
943	for (@REGISTRY, @models) {	1226	for (@REGISTRY, @models) {
944	my ($package, $model) = @$_;	1227	my ($package, $model) = @$_;
945	if (${"$package\::VERSION"} > 0) {	1228	if (${"$package\::VERSION"} > 0) {
946	if (eval "require $model") {	1229	if (eval "require $model") {
947	$MODEL = $model;	1230	$MODEL = $model;
948	warn "AnyEvent: autodetected model '$model', using it.\n" if $verbose > 1;	1231	warn "AnyEvent: autodetected model '$model', using it.\n" if $VERBOSE >= 2;
949	last;	1232	last;
950	}	1233	}
951	}	1234	}
952	}	1235	}
953		1236
954	unless ($MODEL) {	1237	unless ($MODEL) {
955	# try to load a model	1238	# try to autoload a model
956
957	for (@REGISTRY, @models) {	1239	for (@REGISTRY, @models) {
958	my ($package, $model) = @$_;	1240	my ($package, $model, $autoload) = @$_;
		1241	if (
		1242	$autoload
959	if (eval "require $package"	1243	and eval "require $package"
960	and ${"$package\::VERSION"} > 0	1244	and ${"$package\::VERSION"} > 0
961	and eval "require $model") {	1245	and eval "require $model"
		1246	) {
962	$MODEL = $model;	1247	$MODEL = $model;
963	warn "AnyEvent: autoprobed model '$model', using it.\n" if $verbose > 1;	1248	warn "AnyEvent: autoloaded model '$model', using it.\n" if $VERBOSE >= 2;
964	last;	1249	last;
965	}	1250	}
966	}	1251	}
967		1252
968	$MODEL	1253	$MODEL
969	or die "No event module selected for AnyEvent and autodetect failed. Install any one of these modules: EV, Event or Glib.";	1254	or die "No event module selected for AnyEvent and autodetect failed. Install any one of these modules: EV, Event or Glib.\n";
970	}	1255	}
971	}	1256	}
972		1257
973	push @{"$MODEL\::ISA"}, "AnyEvent::Base";	1258	push @{"$MODEL\::ISA"}, "AnyEvent::Base";
974		1259
…		…
984		1269
985	sub AUTOLOAD {	1270	sub AUTOLOAD {
986	(my $func = $AUTOLOAD) =~ s/.*://;	1271	(my $func = $AUTOLOAD) =~ s/.*://;
987		1272
988	$method{$func}	1273	$method{$func}
989	or croak "$func: not a valid method for AnyEvent objects";	1274	or Carp::croak "$func: not a valid method for AnyEvent objects";
990		1275
991	detect unless $MODEL;	1276	detect unless $MODEL;
992		1277
993	my $class = shift;	1278	my $class = shift;
994	$class->$func (@_);	1279	$class->$func (@_);
995	}	1280	}
996		1281
997	# utility function to dup a filehandle. this is used by many backends	1282	# utility function to dup a filehandle. this is used by many backends
998	# to support binding more than one watcher per filehandle (they usually	1283	# to support binding more than one watcher per filehandle (they usually
999	# allow only one watcher per fd, so we dup it to get a different one).	1284	# allow only one watcher per fd, so we dup it to get a different one).
1000	sub _dupfh($$$$) {	1285	sub _dupfh($$;$$) {
1001	my ($poll, $fh, $r, $w) = @_;	1286	my ($poll, $fh, $r, $w) = @_;
1002		1287
1003	require Fcntl;
1004
1005	# cygwin requires the fh mode to be matching, unix doesn't	1288	# cygwin requires the fh mode to be matching, unix doesn't
1006	my ($rw, $mode) = $poll eq "r" ? ($r, "<")	1289	my ($rw, $mode) = $poll eq "r" ? ($r, "<&") : ($w, ">&");
1007	: $poll eq "w" ? ($w, ">")
1008	: Carp::croak "AnyEvent->io requires poll set to either 'r' or 'w'";
1009		1290
1010	open my $fh2, "$mode&" . fileno $fh	1291	open my $fh2, $mode, $fh
1011	or die "cannot dup() filehandle: $!";	1292	or die "AnyEvent->io: cannot dup() filehandle in mode '$poll': $!,";
1012		1293
1013	# we assume CLOEXEC is already set by perl in all important cases	1294	# we assume CLOEXEC is already set by perl in all important cases
1014		1295
1015	($fh2, $rw)	1296	($fh2, $rw)
1016	}	1297	}
1017		1298
		1299	=head1 SIMPLIFIED AE API
		1300
		1301	Starting with version 5.0, AnyEvent officially supports a second, much
		1302	simpler, API that is designed to reduce the calling, typing and memory
		1303	overhead.
		1304
		1305	See the L<AE> manpage for details.
		1306
		1307	=cut
		1308
		1309	package AE;
		1310
		1311	our $VERSION = $AnyEvent::VERSION;
		1312
		1313	sub io($$$) {
		1314	AnyEvent->io (fh => $_[0], poll => $_[1] ? "w" : "r", cb => $_[2])
		1315	}
		1316
		1317	sub timer($$$) {
		1318	AnyEvent->timer (after => $_[0], interval => $_[1], cb => $_[2])
		1319	}
		1320
		1321	sub signal($$) {
		1322	AnyEvent->signal (signal => $_[0], cb => $_[1])
		1323	}
		1324
		1325	sub child($$) {
		1326	AnyEvent->child (pid => $_[0], cb => $_[1])
		1327	}
		1328
		1329	sub idle($) {
		1330	AnyEvent->idle (cb => $_[0])
		1331	}
		1332
		1333	sub cv(;&) {
		1334	AnyEvent->condvar (@_ ? (cb => $_[0]) : ())
		1335	}
		1336
		1337	sub now() {
		1338	AnyEvent->now
		1339	}
		1340
		1341	sub now_update() {
		1342	AnyEvent->now_update
		1343	}
		1344
		1345	sub time() {
		1346	AnyEvent->time
		1347	}
		1348
1018	package AnyEvent::Base;	1349	package AnyEvent::Base;
1019		1350
1020	# default implementation for now and time	1351	# default implementations for many methods
1021		1352
1022	use Time::HiRes ();	1353	sub _time() {
		1354	# probe for availability of Time::HiRes
		1355	if (eval "use Time::HiRes (); Time::HiRes::time (); 1") {
		1356	warn "AnyEvent: using Time::HiRes for sub-second timing accuracy.\n" if $VERBOSE >= 8;
		1357	*_time = \&Time::HiRes::time;
		1358	# if (eval "use POSIX (); (POSIX::times())...
		1359	} else {
		1360	warn "AnyEvent: using built-in time(), WARNING, no sub-second resolution!\n" if $VERBOSE;
		1361	*_time = sub { time }; # epic fail
		1362	}
1023		1363
1024	sub time { Time::HiRes::time }	1364	&_time
1025	sub now { Time::HiRes::time }	1365	}
		1366
		1367	sub time { _time }
		1368	sub now { _time }
		1369	sub now_update { }
1026		1370
1027	# default implementation for ->condvar	1371	# default implementation for ->condvar
1028		1372
1029	sub condvar {	1373	sub condvar {
1030	bless { @_ == 3 ? (_ae_cb => $_[2]) : () }, AnyEvent::CondVar::	1374	bless { @_ == 3 ? (_ae_cb => $_[2]) : () }, "AnyEvent::CondVar"
1031	}	1375	}
1032		1376
1033	# default implementation for ->signal	1377	# default implementation for ->signal
1034		1378
1035	our %SIG_CB;	1379	our $HAVE_ASYNC_INTERRUPT;
		1380
		1381	sub _have_async_interrupt() {
		1382	$HAVE_ASYNC_INTERRUPT = 1*(!$ENV{PERL_ANYEVENT_AVOID_ASYNC_INTERRUPT}
		1383	&& eval "use Async::Interrupt 1.02 (); 1")
		1384	unless defined $HAVE_ASYNC_INTERRUPT;
		1385
		1386	$HAVE_ASYNC_INTERRUPT
		1387	}
		1388
		1389	our ($SIGPIPE_R, $SIGPIPE_W, %SIG_CB, %SIG_EV, $SIG_IO);
		1390	our (%SIG_ASY, %SIG_ASY_W);
		1391	our ($SIG_COUNT, $SIG_TW);
		1392
		1393	sub _signal_exec {
		1394	$HAVE_ASYNC_INTERRUPT
		1395	? $SIGPIPE_R->drain
		1396	: sysread $SIGPIPE_R, (my $dummy), 9;
		1397
		1398	while (%SIG_EV) {
		1399	for (keys %SIG_EV) {
		1400	delete $SIG_EV{$_};
		1401	$_->() for values %{ $SIG_CB{$_} || {} };
		1402	}
		1403	}
		1404	}
		1405
		1406	# install a dummy wakeup watcher to reduce signal catching latency
		1407	sub _sig_add() {
		1408	unless ($SIG_COUNT++) {
		1409	# try to align timer on a full-second boundary, if possible
		1410	my $NOW = AE::now;
		1411
		1412	$SIG_TW = AE::timer
		1413	$MAX_SIGNAL_LATENCY - ($NOW - int $NOW),
		1414	$MAX_SIGNAL_LATENCY,
		1415	sub { } # just for the PERL_ASYNC_CHECK
		1416	;
		1417	}
		1418	}
		1419
		1420	sub _sig_del {
		1421	undef $SIG_TW
		1422	unless --$SIG_COUNT;
		1423	}
		1424
		1425	our $_sig_name_init; $_sig_name_init = sub {
		1426	eval q{ # poor man's autoloading
		1427	undef $_sig_name_init;
		1428
		1429	if (_have_async_interrupt) {
		1430	*sig2num = \&Async::Interrupt::sig2num;
		1431	*sig2name = \&Async::Interrupt::sig2name;
		1432	} else {
		1433	require Config;
		1434
		1435	my %signame2num;
		1436	@signame2num{ split ' ', $Config::Config{sig_name} }
		1437	= split ' ', $Config::Config{sig_num};
		1438
		1439	my @signum2name;
		1440	@signum2name[values %signame2num] = keys %signame2num;
		1441
		1442	*sig2num = sub($) {
		1443	$_[0] > 0 ? shift : $signame2num{+shift}
		1444	};
		1445	*sig2name = sub ($) {
		1446	$_[0] > 0 ? $signum2name[+shift] : shift
		1447	};
		1448	}
		1449	};
		1450	die if $@;
		1451	};
		1452
		1453	sub sig2num ($) { &$_sig_name_init; &sig2num }
		1454	sub sig2name($) { &$_sig_name_init; &sig2name }
1036		1455
1037	sub signal {	1456	sub signal {
		1457	eval q{ # poor man's autoloading {}
		1458	# probe for availability of Async::Interrupt
		1459	if (_have_async_interrupt) {
		1460	warn "AnyEvent: using Async::Interrupt for race-free signal handling.\n" if $VERBOSE >= 8;
		1461
		1462	$SIGPIPE_R = new Async::Interrupt::EventPipe;
		1463	$SIG_IO = AE::io $SIGPIPE_R->fileno, 0, \&_signal_exec;
		1464
		1465	} else {
		1466	warn "AnyEvent: using emulated perl signal handling with latency timer.\n" if $VERBOSE >= 8;
		1467
		1468	require Fcntl;
		1469
		1470	if (AnyEvent::WIN32) {
		1471	require AnyEvent::Util;
		1472
		1473	($SIGPIPE_R, $SIGPIPE_W) = AnyEvent::Util::portable_pipe ();
		1474	AnyEvent::Util::fh_nonblocking ($SIGPIPE_R, 1) if $SIGPIPE_R;
		1475	AnyEvent::Util::fh_nonblocking ($SIGPIPE_W, 1) if $SIGPIPE_W; # just in case
		1476	} else {
		1477	pipe $SIGPIPE_R, $SIGPIPE_W;
		1478	fcntl $SIGPIPE_R, &Fcntl::F_SETFL, &Fcntl::O_NONBLOCK if $SIGPIPE_R;
		1479	fcntl $SIGPIPE_W, &Fcntl::F_SETFL, &Fcntl::O_NONBLOCK if $SIGPIPE_W; # just in case
		1480
		1481	# not strictly required, as $^F is normally 2, but let's make sure...
		1482	fcntl $SIGPIPE_R, &Fcntl::F_SETFD, &Fcntl::FD_CLOEXEC;
		1483	fcntl $SIGPIPE_W, &Fcntl::F_SETFD, &Fcntl::FD_CLOEXEC;
		1484	}
		1485
		1486	$SIGPIPE_R
		1487	or Carp::croak "AnyEvent: unable to create a signal reporting pipe: $!\n";
		1488
		1489	$SIG_IO = AE::io $SIGPIPE_R, 0, \&_signal_exec;
		1490	}
		1491
		1492	*signal = sub {
1038	my (undef, %arg) = @_;	1493	my (undef, %arg) = @_;
1039		1494
1040	my $signal = uc $arg{signal}	1495	my $signal = uc $arg{signal}
1041	or Carp::croak "required option 'signal' is missing";	1496	or Carp::croak "required option 'signal' is missing";
1042		1497
		1498	if ($HAVE_ASYNC_INTERRUPT) {
		1499	# async::interrupt
		1500
		1501	$signal = sig2num $signal;
1043	$SIG_CB{$signal}{$arg{cb}} = $arg{cb};	1502	$SIG_CB{$signal}{$arg{cb}} = $arg{cb};
		1503
		1504	$SIG_ASY{$signal} ||= new Async::Interrupt
		1505	cb => sub { undef $SIG_EV{$signal} },
		1506	signal => $signal,
		1507	pipe => [$SIGPIPE_R->filenos],
		1508	pipe_autodrain => 0,
		1509	;
		1510
		1511	} else {
		1512	# pure perl
		1513
		1514	# AE::Util has been loaded in signal
		1515	$signal = sig2name $signal;
		1516	$SIG_CB{$signal}{$arg{cb}} = $arg{cb};
		1517
1044	$SIG{$signal} ||= sub {	1518	$SIG{$signal} ||= sub {
1045	$_->() for values %{ $SIG_CB{$signal} || {} };	1519	local $!;
		1520	syswrite $SIGPIPE_W, "\x00", 1 unless %SIG_EV;
		1521	undef $SIG_EV{$signal};
		1522	};
		1523
		1524	# can't do signal processing without introducing races in pure perl,
		1525	# so limit the signal latency.
		1526	_sig_add;
		1527	}
		1528
		1529	bless [$signal, $arg{cb}], "AnyEvent::Base::signal"
		1530	};
		1531
		1532	*AnyEvent::Base::signal::DESTROY = sub {
		1533	my ($signal, $cb) = @{$_[0]};
		1534
		1535	_sig_del;
		1536
		1537	delete $SIG_CB{$signal}{$cb};
		1538
		1539	$HAVE_ASYNC_INTERRUPT
		1540	? delete $SIG_ASY{$signal}
		1541	: # delete doesn't work with older perls - they then
		1542	# print weird messages, or just unconditionally exit
		1543	# instead of getting the default action.
		1544	undef $SIG{$signal}
		1545	unless keys %{ $SIG_CB{$signal} };
		1546	};
1046	};	1547	};
1047		1548	die if $@;
1048	bless [$signal, $arg{cb}], "AnyEvent::Base::Signal"	1549	&signal
1049	}
1050
1051	sub AnyEvent::Base::Signal::DESTROY {
1052	my ($signal, $cb) = @{$_[0]};
1053
1054	delete $SIG_CB{$signal}{$cb};
1055
1056	delete $SIG{$signal} unless keys %{ $SIG_CB{$signal} };
1057	}	1550	}
1058		1551
1059	# default implementation for ->child	1552	# default implementation for ->child
1060		1553
1061	our %PID_CB;	1554	our %PID_CB;
1062	our $CHLD_W;	1555	our $CHLD_W;
1063	our $CHLD_DELAY_W;	1556	our $CHLD_DELAY_W;
1064	our $PID_IDLE;
1065	our $WNOHANG;	1557	our $WNOHANG;
1066		1558
1067	sub _child_wait {	1559	sub _emit_childstatus($$) {
1068	while (0 < (my $pid = waitpid -1, $WNOHANG)) {	1560	my (undef, $rpid, $rstatus) = @_;
		1561
		1562	$_->($rpid, $rstatus)
1069	$_->($pid, $?) for (values %{ $PID_CB{$pid} || {} }),	1563	for values %{ $PID_CB{$rpid} || {} },
1070	(values %{ $PID_CB{0} || {} });	1564	values %{ $PID_CB{0} || {} };
1071	}
1072
1073	undef $PID_IDLE;
1074	}	1565	}
1075		1566
1076	sub _sigchld {	1567	sub _sigchld {
1077	# make sure we deliver these changes "synchronous" with the event loop.	1568	my $pid;
1078	$CHLD_DELAY_W ||= AnyEvent->timer (after => 0, cb => sub {	1569
1079	undef $CHLD_DELAY_W;	1570	AnyEvent->_emit_childstatus ($pid, $?)
1080	&_child_wait;	1571	while ($pid = waitpid -1, $WNOHANG) > 0;
1081	});
1082	}	1572	}
1083		1573
1084	sub child {	1574	sub child {
1085	my (undef, %arg) = @_;	1575	my (undef, %arg) = @_;
1086		1576
1087	defined (my $pid = $arg{pid} + 0)	1577	defined (my $pid = $arg{pid} + 0)
1088	or Carp::croak "required option 'pid' is missing";	1578	or Carp::croak "required option 'pid' is missing";
1089		1579
1090	$PID_CB{$pid}{$arg{cb}} = $arg{cb};	1580	$PID_CB{$pid}{$arg{cb}} = $arg{cb};
1091		1581
1092	unless ($WNOHANG) {	1582	# WNOHANG is almost cetrainly 1 everywhere
		1583	$WNOHANG ||= $^O =~ /^(?:openbsd|netbsd|linux|freebsd|cygwin|MSWin32)$/
		1584	? 1
1093	$WNOHANG = eval { local $SIG{__DIE__}; require POSIX; &POSIX::WNOHANG } || 1;	1585	: eval { local $SIG{__DIE__}; require POSIX; &POSIX::WNOHANG } || 1;
1094	}
1095		1586
1096	unless ($CHLD_W) {	1587	unless ($CHLD_W) {
1097	$CHLD_W = AnyEvent->signal (signal => 'CHLD', cb => \&_sigchld);	1588	$CHLD_W = AE::signal CHLD => \&_sigchld;
1098	# child could be a zombie already, so make at least one round	1589	# child could be a zombie already, so make at least one round
1099	&_sigchld;	1590	&_sigchld;
1100	}	1591	}
1101		1592
1102	bless [$pid, $arg{cb}], "AnyEvent::Base::Child"	1593	bless [$pid, $arg{cb}], "AnyEvent::Base::child"
1103	}	1594	}
1104		1595
1105	sub AnyEvent::Base::Child::DESTROY {	1596	sub AnyEvent::Base::child::DESTROY {
1106	my ($pid, $cb) = @{$_[0]};	1597	my ($pid, $cb) = @{$_[0]};
1107		1598
1108	delete $PID_CB{$pid}{$cb};	1599	delete $PID_CB{$pid}{$cb};
1109	delete $PID_CB{$pid} unless keys %{ $PID_CB{$pid} };	1600	delete $PID_CB{$pid} unless keys %{ $PID_CB{$pid} };
1110		1601
1111	undef $CHLD_W unless keys %PID_CB;	1602	undef $CHLD_W unless keys %PID_CB;
1112	}	1603	}
1113		1604
		1605	# idle emulation is done by simply using a timer, regardless
		1606	# of whether the process is idle or not, and not letting
		1607	# the callback use more than 50% of the time.
		1608	sub idle {
		1609	my (undef, %arg) = @_;
		1610
		1611	my ($cb, $w, $rcb) = $arg{cb};
		1612
		1613	$rcb = sub {
		1614	if ($cb) {
		1615	$w = _time;
		1616	&$cb;
		1617	$w = _time - $w;
		1618
		1619	# never use more then 50% of the time for the idle watcher,
		1620	# within some limits
		1621	$w = 0.0001 if $w < 0.0001;
		1622	$w = 5 if $w > 5;
		1623
		1624	$w = AE::timer $w, 0, $rcb;
		1625	} else {
		1626	# clean up...
		1627	undef $w;
		1628	undef $rcb;
		1629	}
		1630	};
		1631
		1632	$w = AE::timer 0.05, 0, $rcb;
		1633
		1634	bless \\$cb, "AnyEvent::Base::idle"
		1635	}
		1636
		1637	sub AnyEvent::Base::idle::DESTROY {
		1638	undef $${$_[0]};
		1639	}
		1640
1114	package AnyEvent::CondVar;	1641	package AnyEvent::CondVar;
1115		1642
1116	our @ISA = AnyEvent::CondVar::Base::;	1643	our @ISA = AnyEvent::CondVar::Base::;
1117		1644
1118	package AnyEvent::CondVar::Base;	1645	package AnyEvent::CondVar::Base;
1119		1646
1120	use overload	1647	#use overload
1121	'&{}' => sub { my $self = shift; sub { $self->send (@_) } },	1648	# '&{}' => sub { my $self = shift; sub { $self->send (@_) } },
1122	fallback => 1;	1649	# fallback => 1;
		1650
		1651	# save 300+ kilobytes by dirtily hardcoding overloading
		1652	${"AnyEvent::CondVar::Base::OVERLOAD"}{dummy}++; # Register with magic by touching.
		1653	*{'AnyEvent::CondVar::Base::()'} = sub { }; # "Make it findable via fetchmethod."
		1654	*{'AnyEvent::CondVar::Base::(&{}'} = sub { my $self = shift; sub { $self->send (@_) } }; # &{}
		1655	${'AnyEvent::CondVar::Base::()'} = 1; # fallback
		1656
		1657	our $WAITING;
1123		1658
1124	sub _send {	1659	sub _send {
1125	# nop	1660	# nop
1126	}	1661	}
1127		1662
…		…
1140	sub ready {	1675	sub ready {
1141	$_[0]{_ae_sent}	1676	$_[0]{_ae_sent}
1142	}	1677	}
1143		1678
1144	sub _wait {	1679	sub _wait {
		1680	$WAITING
		1681	and !$_[0]{_ae_sent}
		1682	and Carp::croak "AnyEvent::CondVar: recursive blocking wait detected";
		1683
		1684	local $WAITING = 1;
1145	AnyEvent->one_event while !$_[0]{_ae_sent};	1685	AnyEvent->one_event while !$_[0]{_ae_sent};
1146	}	1686	}
1147		1687
1148	sub recv {	1688	sub recv {
1149	$_[0]->_wait;	1689	$_[0]->_wait;
…		…
1151	Carp::croak $_[0]{_ae_croak} if $_[0]{_ae_croak};	1691	Carp::croak $_[0]{_ae_croak} if $_[0]{_ae_croak};
1152	wantarray ? @{ $_[0]{_ae_sent} } : $_[0]{_ae_sent}[0]	1692	wantarray ? @{ $_[0]{_ae_sent} } : $_[0]{_ae_sent}[0]
1153	}	1693	}
1154		1694
1155	sub cb {	1695	sub cb {
1156	$_[0]{_ae_cb} = $_[1] if @_ > 1;	1696	my $cv = shift;
		1697
		1698	@_
		1699	and $cv->{_ae_cb} = shift
		1700	and $cv->{_ae_sent}
		1701	and (delete $cv->{_ae_cb})->($cv);
		1702
1157	$_[0]{_ae_cb}	1703	$cv->{_ae_cb}
1158	}	1704	}
1159		1705
1160	sub begin {	1706	sub begin {
1161	++$_[0]{_ae_counter};	1707	++$_[0]{_ae_counter};
1162	$_[0]{_ae_end_cb} = $_[1] if @_ > 1;	1708	$_[0]{_ae_end_cb} = $_[1] if @_ > 1;
…		…
1168	}	1714	}
1169		1715
1170	# undocumented/compatibility with pre-3.4	1716	# undocumented/compatibility with pre-3.4
1171	*broadcast = \&send;	1717	*broadcast = \&send;
1172	*wait = \&_wait;	1718	*wait = \&_wait;
		1719
		1720	=head1 ERROR AND EXCEPTION HANDLING
		1721
		1722	In general, AnyEvent does not do any error handling - it relies on the
		1723	caller to do that if required. The L<AnyEvent::Strict> module (see also
		1724	the C<PERL_ANYEVENT_STRICT> environment variable, below) provides strict
		1725	checking of all AnyEvent methods, however, which is highly useful during
		1726	development.
		1727
		1728	As for exception handling (i.e. runtime errors and exceptions thrown while
		1729	executing a callback), this is not only highly event-loop specific, but
		1730	also not in any way wrapped by this module, as this is the job of the main
		1731	program.
		1732
		1733	The pure perl event loop simply re-throws the exception (usually
		1734	within C<< condvar->recv >>), the L<Event> and L<EV> modules call C<<
		1735	$Event/EV::DIED->() >>, L<Glib> uses C<< install_exception_handler >> and
		1736	so on.
		1737
		1738	=head1 ENVIRONMENT VARIABLES
		1739
		1740	The following environment variables are used by this module or its
		1741	submodules.
		1742
		1743	Note that AnyEvent will remove I<all> environment variables starting with
		1744	C<PERL_ANYEVENT_> from C<%ENV> when it is loaded while taint mode is
		1745	enabled.
		1746
		1747	=over 4
		1748
		1749	=item C<PERL_ANYEVENT_VERBOSE>
		1750
		1751	By default, AnyEvent will be completely silent except in fatal
		1752	conditions. You can set this environment variable to make AnyEvent more
		1753	talkative.
		1754
		1755	When set to C<1> or higher, causes AnyEvent to warn about unexpected
		1756	conditions, such as not being able to load the event model specified by
		1757	C<PERL_ANYEVENT_MODEL>.
		1758
		1759	When set to C<2> or higher, cause AnyEvent to report to STDERR which event
		1760	model it chooses.
		1761
		1762	When set to C<8> or higher, then AnyEvent will report extra information on
		1763	which optional modules it loads and how it implements certain features.
		1764
		1765	=item C<PERL_ANYEVENT_STRICT>
		1766
		1767	AnyEvent does not do much argument checking by default, as thorough
		1768	argument checking is very costly. Setting this variable to a true value
		1769	will cause AnyEvent to load C<AnyEvent::Strict> and then to thoroughly
		1770	check the arguments passed to most method calls. If it finds any problems,
		1771	it will croak.
		1772
		1773	In other words, enables "strict" mode.
		1774
		1775	Unlike C<use strict> (or it's modern cousin, C<< use L<common::sense>
		1776	>>, it is definitely recommended to keep it off in production. Keeping
		1777	C<PERL_ANYEVENT_STRICT=1> in your environment while developing programs
		1778	can be very useful, however.
		1779
		1780	=item C<PERL_ANYEVENT_MODEL>
		1781
		1782	This can be used to specify the event model to be used by AnyEvent, before
		1783	auto detection and -probing kicks in. It must be a string consisting
		1784	entirely of ASCII letters. The string C<AnyEvent::Impl::> gets prepended
		1785	and the resulting module name is loaded and if the load was successful,
		1786	used as event model. If it fails to load AnyEvent will proceed with
		1787	auto detection and -probing.
		1788
		1789	This functionality might change in future versions.
		1790
		1791	For example, to force the pure perl model (L<AnyEvent::Impl::Perl>) you
		1792	could start your program like this:
		1793
		1794	PERL_ANYEVENT_MODEL=Perl perl ...
		1795
		1796	=item C<PERL_ANYEVENT_PROTOCOLS>
		1797
		1798	Used by both L<AnyEvent::DNS> and L<AnyEvent::Socket> to determine preferences
		1799	for IPv4 or IPv6. The default is unspecified (and might change, or be the result
		1800	of auto probing).
		1801
		1802	Must be set to a comma-separated list of protocols or address families,
		1803	current supported: C<ipv4> and C<ipv6>. Only protocols mentioned will be
		1804	used, and preference will be given to protocols mentioned earlier in the
		1805	list.
		1806
		1807	This variable can effectively be used for denial-of-service attacks
		1808	against local programs (e.g. when setuid), although the impact is likely
		1809	small, as the program has to handle conenction and other failures anyways.
		1810
		1811	Examples: C<PERL_ANYEVENT_PROTOCOLS=ipv4,ipv6> - prefer IPv4 over IPv6,
		1812	but support both and try to use both. C<PERL_ANYEVENT_PROTOCOLS=ipv4>
		1813	- only support IPv4, never try to resolve or contact IPv6
		1814	addresses. C<PERL_ANYEVENT_PROTOCOLS=ipv6,ipv4> support either IPv4 or
		1815	IPv6, but prefer IPv6 over IPv4.
		1816
		1817	=item C<PERL_ANYEVENT_EDNS0>
		1818
		1819	Used by L<AnyEvent::DNS> to decide whether to use the EDNS0 extension
		1820	for DNS. This extension is generally useful to reduce DNS traffic, but
		1821	some (broken) firewalls drop such DNS packets, which is why it is off by
		1822	default.
		1823
		1824	Setting this variable to C<1> will cause L<AnyEvent::DNS> to announce
		1825	EDNS0 in its DNS requests.
		1826
		1827	=item C<PERL_ANYEVENT_MAX_FORKS>
		1828
		1829	The maximum number of child processes that C<AnyEvent::Util::fork_call>
		1830	will create in parallel.
		1831
		1832	=item C<PERL_ANYEVENT_MAX_OUTSTANDING_DNS>
		1833
		1834	The default value for the C<max_outstanding> parameter for the default DNS
		1835	resolver - this is the maximum number of parallel DNS requests that are
		1836	sent to the DNS server.
		1837
		1838	=item C<PERL_ANYEVENT_RESOLV_CONF>
		1839
		1840	The file to use instead of F</etc/resolv.conf> (or OS-specific
		1841	configuration) in the default resolver. When set to the empty string, no
		1842	default config will be used.
		1843
		1844	=item C<PERL_ANYEVENT_CA_FILE>, C<PERL_ANYEVENT_CA_PATH>.
		1845
		1846	When neither C<ca_file> nor C<ca_path> was specified during
		1847	L<AnyEvent::TLS> context creation, and either of these environment
		1848	variables exist, they will be used to specify CA certificate locations
		1849	instead of a system-dependent default.
		1850
		1851	=item C<PERL_ANYEVENT_AVOID_GUARD> and C<PERL_ANYEVENT_AVOID_ASYNC_INTERRUPT>
		1852
		1853	When these are set to C<1>, then the respective modules are not
		1854	loaded. Mostly good for testing AnyEvent itself.
		1855
		1856	=back
1173		1857
1174	=head1 SUPPLYING YOUR OWN EVENT MODEL INTERFACE	1858	=head1 SUPPLYING YOUR OWN EVENT MODEL INTERFACE
1175		1859
1176	This is an advanced topic that you do not normally need to use AnyEvent in	1860	This is an advanced topic that you do not normally need to use AnyEvent in
1177	a module. This section is only of use to event loop authors who want to	1861	a module. This section is only of use to event loop authors who want to
…		…
1211		1895
1212	I<rxvt-unicode> also cheats a bit by not providing blocking access to	1896	I<rxvt-unicode> also cheats a bit by not providing blocking access to
1213	condition variables: code blocking while waiting for a condition will	1897	condition variables: code blocking while waiting for a condition will
1214	C<die>. This still works with most modules/usages, and blocking calls must	1898	C<die>. This still works with most modules/usages, and blocking calls must
1215	not be done in an interactive application, so it makes sense.	1899	not be done in an interactive application, so it makes sense.
1216
1217	=head1 ENVIRONMENT VARIABLES
1218
1219	The following environment variables are used by this module:
1220
1221	=over 4
1222
1223	=item C<PERL_ANYEVENT_VERBOSE>
1224
1225	By default, AnyEvent will be completely silent except in fatal
1226	conditions. You can set this environment variable to make AnyEvent more
1227	talkative.
1228
1229	When set to C<1> or higher, causes AnyEvent to warn about unexpected
1230	conditions, such as not being able to load the event model specified by
1231	C<PERL_ANYEVENT_MODEL>.
1232
1233	When set to C<2> or higher, cause AnyEvent to report to STDERR which event
1234	model it chooses.
1235
1236	=item C<PERL_ANYEVENT_STRICT>
1237
1238	AnyEvent does not do much argument checking by default, as thorough
1239	argument checking is very costly. Setting this variable to a true value
1240	will cause AnyEvent to load C<AnyEvent::Strict> and then to thoroughly
1241	check the arguments passed to most method calls. If it finds any problems
1242	it will croak.
1243
1244	In other words, enables "strict" mode.
1245
1246	Unlike C<use strict> it is definitely recommended ot keep it off in
1247	production.
1248
1249	=item C<PERL_ANYEVENT_MODEL>
1250
1251	This can be used to specify the event model to be used by AnyEvent, before
1252	auto detection and -probing kicks in. It must be a string consisting
1253	entirely of ASCII letters. The string C<AnyEvent::Impl::> gets prepended
1254	and the resulting module name is loaded and if the load was successful,
1255	used as event model. If it fails to load AnyEvent will proceed with
1256	auto detection and -probing.
1257
1258	This functionality might change in future versions.
1259
1260	For example, to force the pure perl model (L<AnyEvent::Impl::Perl>) you
1261	could start your program like this:
1262
1263	PERL_ANYEVENT_MODEL=Perl perl ...
1264
1265	=item C<PERL_ANYEVENT_PROTOCOLS>
1266
1267	Used by both L<AnyEvent::DNS> and L<AnyEvent::Socket> to determine preferences
1268	for IPv4 or IPv6. The default is unspecified (and might change, or be the result
1269	of auto probing).
1270
1271	Must be set to a comma-separated list of protocols or address families,
1272	current supported: C<ipv4> and C<ipv6>. Only protocols mentioned will be
1273	used, and preference will be given to protocols mentioned earlier in the
1274	list.
1275
1276	This variable can effectively be used for denial-of-service attacks
1277	against local programs (e.g. when setuid), although the impact is likely
1278	small, as the program has to handle connection errors already-
1279
1280	Examples: C<PERL_ANYEVENT_PROTOCOLS=ipv4,ipv6> - prefer IPv4 over IPv6,
1281	but support both and try to use both. C<PERL_ANYEVENT_PROTOCOLS=ipv4>
1282	- only support IPv4, never try to resolve or contact IPv6
1283	addresses. C<PERL_ANYEVENT_PROTOCOLS=ipv6,ipv4> support either IPv4 or
1284	IPv6, but prefer IPv6 over IPv4.
1285
1286	=item C<PERL_ANYEVENT_EDNS0>
1287
1288	Used by L<AnyEvent::DNS> to decide whether to use the EDNS0 extension
1289	for DNS. This extension is generally useful to reduce DNS traffic, but
1290	some (broken) firewalls drop such DNS packets, which is why it is off by
1291	default.
1292
1293	Setting this variable to C<1> will cause L<AnyEvent::DNS> to announce
1294	EDNS0 in its DNS requests.
1295
1296	=item C<PERL_ANYEVENT_MAX_FORKS>
1297
1298	The maximum number of child processes that C<AnyEvent::Util::fork_call>
1299	will create in parallel.
1300
1301	=back
1302		1900
1303	=head1 EXAMPLE PROGRAM	1901	=head1 EXAMPLE PROGRAM
1304		1902
1305	The following program uses an I/O watcher to read data from STDIN, a timer	1903	The following program uses an I/O watcher to read data from STDIN, a timer
1306	to display a message once per second, and a condition variable to quit the	1904	to display a message once per second, and a condition variable to quit the
…		…
1319	warn "read: $input\n"; # output what has been read	1917	warn "read: $input\n"; # output what has been read
1320	$cv->send if $input =~ /^q/i; # quit program if /^q/i	1918	$cv->send if $input =~ /^q/i; # quit program if /^q/i
1321	},	1919	},
1322	);	1920	);
1323		1921
1324	my $time_watcher; # can only be used once
1325
1326	sub new_timer {
1327	$timer = AnyEvent->timer (after => 1, cb => sub {	1922	my $time_watcher = AnyEvent->timer (after => 1, interval => 1, cb => sub {
1328	warn "timeout\n"; # print 'timeout' about every second	1923	warn "timeout\n"; # print 'timeout' at most every second
1329	&new_timer; # and restart the time
1330	});	1924	});
1331	}
1332
1333	new_timer; # create first timer
1334		1925
1335	$cv->recv; # wait until user enters /^q/i	1926	$cv->recv; # wait until user enters /^q/i
1336		1927
1337	=head1 REAL-WORLD EXAMPLE	1928	=head1 REAL-WORLD EXAMPLE
1338		1929
…		…
1469	through AnyEvent. The benchmark creates a lot of timers (with a zero	2060	through AnyEvent. The benchmark creates a lot of timers (with a zero
1470	timeout) and I/O watchers (watching STDOUT, a pty, to become writable,	2061	timeout) and I/O watchers (watching STDOUT, a pty, to become writable,
1471	which it is), lets them fire exactly once and destroys them again.	2062	which it is), lets them fire exactly once and destroys them again.
1472		2063
1473	Source code for this benchmark is found as F<eg/bench> in the AnyEvent	2064	Source code for this benchmark is found as F<eg/bench> in the AnyEvent
1474	distribution.	2065	distribution. It uses the L<AE> interface, which makes a real difference
		2066	for the EV and Perl backends only.
1475		2067
1476	=head3 Explanation of the columns	2068	=head3 Explanation of the columns
1477		2069
1478	I<watcher> is the number of event watchers created/destroyed. Since	2070	I<watcher> is the number of event watchers created/destroyed. Since
1479	different event models feature vastly different performances, each event	2071	different event models feature vastly different performances, each event
…		…
1500	watcher.	2092	watcher.
1501		2093
1502	=head3 Results	2094	=head3 Results
1503		2095
1504	name watchers bytes create invoke destroy comment	2096	name watchers bytes create invoke destroy comment
1505	EV/EV 400000 244 0.56 0.46 0.31 EV native interface	2097	EV/EV 100000 223 0.47 0.43 0.27 EV native interface
1506	EV/Any 100000 244 2.50 0.46 0.29 EV + AnyEvent watchers	2098	EV/Any 100000 223 0.48 0.42 0.26 EV + AnyEvent watchers
1507	CoroEV/Any 100000 244 2.49 0.44 0.29 coroutines + Coro::Signal	2099	Coro::EV/Any 100000 223 0.47 0.42 0.26 coroutines + Coro::Signal
1508	Perl/Any 100000 513 4.92 0.87 1.12 pure perl implementation	2100	Perl/Any 100000 431 2.70 0.74 0.92 pure perl implementation
1509	Event/Event 16000 516 31.88 31.30 0.85 Event native interface	2101	Event/Event 16000 516 31.16 31.84 0.82 Event native interface
1510	Event/Any 16000 590 35.75 31.42 1.08 Event + AnyEvent watchers	2102	Event/Any 16000 1203 42.61 34.79 1.80 Event + AnyEvent watchers
		2103	IOAsync/Any 16000 1911 41.92 27.45 16.81 via IO::Async::Loop::IO_Poll
		2104	IOAsync/Any 16000 1726 40.69 26.37 15.25 via IO::Async::Loop::Epoll
1511	Glib/Any 16000 1357 98.22 12.41 54.00 quadratic behaviour	2105	Glib/Any 16000 1118 89.00 12.57 51.17 quadratic behaviour
1512	Tk/Any 2000 1860 26.97 67.98 14.00 SEGV with >> 2000 watchers	2106	Tk/Any 2000 1346 20.96 10.75 8.00 SEGV with >> 2000 watchers
1513	POE/Event 2000 6644 108.64 736.02 14.73 via POE::Loop::Event	2107	POE/Any 2000 6951 108.97 795.32 14.24 via POE::Loop::Event
1514	POE/Select 2000 6343 94.13 809.12 565.96 via POE::Loop::Select	2108	POE/Any 2000 6648 94.79 774.40 575.51 via POE::Loop::Select
1515		2109
1516	=head3 Discussion	2110	=head3 Discussion
1517		2111
1518	The benchmark does I<not> measure scalability of the event loop very	2112	The benchmark does I<not> measure scalability of the event loop very
1519	well. For example, a select-based event loop (such as the pure perl one)	2113	well. For example, a select-based event loop (such as the pure perl one)
…		…
1531	benchmark machine, handling an event takes roughly 1600 CPU cycles with	2125	benchmark machine, handling an event takes roughly 1600 CPU cycles with
1532	EV, 3100 CPU cycles with AnyEvent's pure perl loop and almost 3000000 CPU	2126	EV, 3100 CPU cycles with AnyEvent's pure perl loop and almost 3000000 CPU
1533	cycles with POE.	2127	cycles with POE.
1534		2128
1535	C<EV> is the sole leader regarding speed and memory use, which are both	2129	C<EV> is the sole leader regarding speed and memory use, which are both
1536	maximal/minimal, respectively. Even when going through AnyEvent, it uses	2130	maximal/minimal, respectively. When using the L<AE> API there is zero
		2131	overhead (when going through the AnyEvent API create is about 5-6 times
		2132	slower, with other times being equal, so still uses far less memory than
1537	far less memory than any other event loop and is still faster than Event	2133	any other event loop and is still faster than Event natively).
1538	natively.
1539		2134
1540	The pure perl implementation is hit in a few sweet spots (both the	2135	The pure perl implementation is hit in a few sweet spots (both the
1541	constant timeout and the use of a single fd hit optimisations in the perl	2136	constant timeout and the use of a single fd hit optimisations in the perl
1542	interpreter and the backend itself). Nevertheless this shows that it	2137	interpreter and the backend itself). Nevertheless this shows that it
1543	adds very little overhead in itself. Like any select-based backend its	2138	adds very little overhead in itself. Like any select-based backend its
1544	performance becomes really bad with lots of file descriptors (and few of	2139	performance becomes really bad with lots of file descriptors (and few of
1545	them active), of course, but this was not subject of this benchmark.	2140	them active), of course, but this was not subject of this benchmark.
1546		2141
1547	The C<Event> module has a relatively high setup and callback invocation	2142	The C<Event> module has a relatively high setup and callback invocation
1548	cost, but overall scores in on the third place.	2143	cost, but overall scores in on the third place.
		2144
		2145	C<IO::Async> performs admirably well, about on par with C<Event>, even
		2146	when using its pure perl backend.
1549		2147
1550	C<Glib>'s memory usage is quite a bit higher, but it features a	2148	C<Glib>'s memory usage is quite a bit higher, but it features a
1551	faster callback invocation and overall ends up in the same class as	2149	faster callback invocation and overall ends up in the same class as
1552	C<Event>. However, Glib scales extremely badly, doubling the number of	2150	C<Event>. However, Glib scales extremely badly, doubling the number of
1553	watchers increases the processing time by more than a factor of four,	2151	watchers increases the processing time by more than a factor of four,
…		…
1614	In this benchmark, we use 10000 socket pairs (20000 sockets), of which 100	2212	In this benchmark, we use 10000 socket pairs (20000 sockets), of which 100
1615	(1%) are active. This mirrors the activity of large servers with many	2213	(1%) are active. This mirrors the activity of large servers with many
1616	connections, most of which are idle at any one point in time.	2214	connections, most of which are idle at any one point in time.
1617		2215
1618	Source code for this benchmark is found as F<eg/bench2> in the AnyEvent	2216	Source code for this benchmark is found as F<eg/bench2> in the AnyEvent
1619	distribution.	2217	distribution. It uses the L<AE> interface, which makes a real difference
		2218	for the EV and Perl backends only.
1620		2219
1621	=head3 Explanation of the columns	2220	=head3 Explanation of the columns
1622		2221
1623	I<sockets> is the number of sockets, and twice the number of "servers" (as	2222	I<sockets> is the number of sockets, and twice the number of "servers" (as
1624	each server has a read and write socket end).	2223	each server has a read and write socket end).
…		…
1631	it to another server. This includes deleting the old timeout and creating	2230	it to another server. This includes deleting the old timeout and creating
1632	a new one that moves the timeout into the future.	2231	a new one that moves the timeout into the future.
1633		2232
1634	=head3 Results	2233	=head3 Results
1635		2234
1636	name sockets create request	2235	name sockets create request
1637	EV 20000 69.01 11.16	2236	EV 20000 62.66 7.99
1638	Perl 20000 73.32 35.87	2237	Perl 20000 68.32 32.64
1639	Event 20000 212.62 257.32	2238	IOAsync 20000 174.06 101.15 epoll
1640	Glib 20000 651.16 1896.30	2239	IOAsync 20000 174.67 610.84 poll
		2240	Event 20000 202.69 242.91
		2241	Glib 20000 557.01 1689.52
1641	POE 20000 349.67 12317.24 uses POE::Loop::Event	2242	POE 20000 341.54 12086.32 uses POE::Loop::Event
1642		2243
1643	=head3 Discussion	2244	=head3 Discussion
1644		2245
1645	This benchmark I<does> measure scalability and overall performance of the	2246	This benchmark I<does> measure scalability and overall performance of the
1646	particular event loop.	2247	particular event loop.
…		…
1648	EV is again fastest. Since it is using epoll on my system, the setup time	2249	EV is again fastest. Since it is using epoll on my system, the setup time
1649	is relatively high, though.	2250	is relatively high, though.
1650		2251
1651	Perl surprisingly comes second. It is much faster than the C-based event	2252	Perl surprisingly comes second. It is much faster than the C-based event
1652	loops Event and Glib.	2253	loops Event and Glib.
		2254
		2255	IO::Async performs very well when using its epoll backend, and still quite
		2256	good compared to Glib when using its pure perl backend.
1653		2257
1654	Event suffers from high setup time as well (look at its code and you will	2258	Event suffers from high setup time as well (look at its code and you will
1655	understand why). Callback invocation also has a high overhead compared to	2259	understand why). Callback invocation also has a high overhead compared to
1656	the C<< $_->() for .. >>-style loop that the Perl event loop uses. Event	2260	the C<< $_->() for .. >>-style loop that the Perl event loop uses. Event
1657	uses select or poll in basically all documented configurations.	2261	uses select or poll in basically all documented configurations.
…		…
1720	=item * C-based event loops perform very well with small number of	2324	=item * C-based event loops perform very well with small number of
1721	watchers, as the management overhead dominates.	2325	watchers, as the management overhead dominates.
1722		2326
1723	=back	2327	=back
1724		2328
		2329	=head2 THE IO::Lambda BENCHMARK
		2330
		2331	Recently I was told about the benchmark in the IO::Lambda manpage, which
		2332	could be misinterpreted to make AnyEvent look bad. In fact, the benchmark
		2333	simply compares IO::Lambda with POE, and IO::Lambda looks better (which
		2334	shouldn't come as a surprise to anybody). As such, the benchmark is
		2335	fine, and mostly shows that the AnyEvent backend from IO::Lambda isn't
		2336	very optimal. But how would AnyEvent compare when used without the extra
		2337	baggage? To explore this, I wrote the equivalent benchmark for AnyEvent.
		2338
		2339	The benchmark itself creates an echo-server, and then, for 500 times,
		2340	connects to the echo server, sends a line, waits for the reply, and then
		2341	creates the next connection. This is a rather bad benchmark, as it doesn't
		2342	test the efficiency of the framework or much non-blocking I/O, but it is a
		2343	benchmark nevertheless.
		2344
		2345	name runtime
		2346	Lambda/select 0.330 sec
		2347	+ optimized 0.122 sec
		2348	Lambda/AnyEvent 0.327 sec
		2349	+ optimized 0.138 sec
		2350	Raw sockets/select 0.077 sec
		2351	POE/select, components 0.662 sec
		2352	POE/select, raw sockets 0.226 sec
		2353	POE/select, optimized 0.404 sec
		2354
		2355	AnyEvent/select/nb 0.085 sec
		2356	AnyEvent/EV/nb 0.068 sec
		2357	+state machine 0.134 sec
		2358
		2359	The benchmark is also a bit unfair (my fault): the IO::Lambda/POE
		2360	benchmarks actually make blocking connects and use 100% blocking I/O,
		2361	defeating the purpose of an event-based solution. All of the newly
		2362	written AnyEvent benchmarks use 100% non-blocking connects (using
		2363	AnyEvent::Socket::tcp_connect and the asynchronous pure perl DNS
		2364	resolver), so AnyEvent is at a disadvantage here, as non-blocking connects
		2365	generally require a lot more bookkeeping and event handling than blocking
		2366	connects (which involve a single syscall only).
		2367
		2368	The last AnyEvent benchmark additionally uses L<AnyEvent::Handle>, which
		2369	offers similar expressive power as POE and IO::Lambda, using conventional
		2370	Perl syntax. This means that both the echo server and the client are 100%
		2371	non-blocking, further placing it at a disadvantage.
		2372
		2373	As you can see, the AnyEvent + EV combination even beats the
		2374	hand-optimised "raw sockets benchmark", while AnyEvent + its pure perl
		2375	backend easily beats IO::Lambda and POE.
		2376
		2377	And even the 100% non-blocking version written using the high-level (and
		2378	slow :) L<AnyEvent::Handle> abstraction beats both POE and IO::Lambda
		2379	higher level ("unoptimised") abstractions by a large margin, even though
		2380	it does all of DNS, tcp-connect and socket I/O in a non-blocking way.
		2381
		2382	The two AnyEvent benchmarks programs can be found as F<eg/ae0.pl> and
		2383	F<eg/ae2.pl> in the AnyEvent distribution, the remaining benchmarks are
		2384	part of the IO::Lambda distribution and were used without any changes.
		2385
		2386
		2387	=head1 SIGNALS
		2388
		2389	AnyEvent currently installs handlers for these signals:
		2390
		2391	=over 4
		2392
		2393	=item SIGCHLD
		2394
		2395	A handler for C<SIGCHLD> is installed by AnyEvent's child watcher
		2396	emulation for event loops that do not support them natively. Also, some
		2397	event loops install a similar handler.
		2398
		2399	Additionally, when AnyEvent is loaded and SIGCHLD is set to IGNORE, then
		2400	AnyEvent will reset it to default, to avoid losing child exit statuses.
		2401
		2402	=item SIGPIPE
		2403
		2404	A no-op handler is installed for C<SIGPIPE> when C<$SIG{PIPE}> is C<undef>
		2405	when AnyEvent gets loaded.
		2406
		2407	The rationale for this is that AnyEvent users usually do not really depend
		2408	on SIGPIPE delivery (which is purely an optimisation for shell use, or
		2409	badly-written programs), but C<SIGPIPE> can cause spurious and rare
		2410	program exits as a lot of people do not expect C<SIGPIPE> when writing to
		2411	some random socket.
		2412
		2413	The rationale for installing a no-op handler as opposed to ignoring it is
		2414	that this way, the handler will be restored to defaults on exec.
		2415
		2416	Feel free to install your own handler, or reset it to defaults.
		2417
		2418	=back
		2419
		2420	=cut
		2421
		2422	undef $SIG{CHLD}
		2423	if $SIG{CHLD} eq 'IGNORE';
		2424
		2425	$SIG{PIPE} = sub { }
		2426	unless defined $SIG{PIPE};
		2427
		2428	=head1 RECOMMENDED/OPTIONAL MODULES
		2429
		2430	One of AnyEvent's main goals is to be 100% Pure-Perl(tm): only perl (and
		2431	it's built-in modules) are required to use it.
		2432
		2433	That does not mean that AnyEvent won't take advantage of some additional
		2434	modules if they are installed.
		2435
		2436	This section epxlains which additional modules will be used, and how they
		2437	affect AnyEvent's operetion.
		2438
		2439	=over 4
		2440
		2441	=item L<Async::Interrupt>
		2442
		2443	This slightly arcane module is used to implement fast signal handling: To
		2444	my knowledge, there is no way to do completely race-free and quick
		2445	signal handling in pure perl. To ensure that signals still get
		2446	delivered, AnyEvent will start an interval timer to wake up perl (and
		2447	catch the signals) with some delay (default is 10 seconds, look for
		2448	C<$AnyEvent::MAX_SIGNAL_LATENCY>).
		2449
		2450	If this module is available, then it will be used to implement signal
		2451	catching, which means that signals will not be delayed, and the event loop
		2452	will not be interrupted regularly, which is more efficient (And good for
		2453	battery life on laptops).
		2454
		2455	This affects not just the pure-perl event loop, but also other event loops
		2456	that have no signal handling on their own (e.g. Glib, Tk, Qt).
		2457
		2458	Some event loops (POE, Event, Event::Lib) offer signal watchers natively,
		2459	and either employ their own workarounds (POE) or use AnyEvent's workaround
		2460	(using C<$AnyEvent::MAX_SIGNAL_LATENCY>). Installing L<Async::Interrupt>
		2461	does nothing for those backends.
		2462
		2463	=item L<EV>
		2464
		2465	This module isn't really "optional", as it is simply one of the backend
		2466	event loops that AnyEvent can use. However, it is simply the best event
		2467	loop available in terms of features, speed and stability: It supports
		2468	the AnyEvent API optimally, implements all the watcher types in XS, does
		2469	automatic timer adjustments even when no monotonic clock is available,
		2470	can take avdantage of advanced kernel interfaces such as C<epoll> and
		2471	C<kqueue>, and is the fastest backend I<by far>. You can even embed
		2472	L<Glib>/L<Gtk2> in it (or vice versa, see L<EV::Glib> and L<Glib::EV>).
		2473
		2474	=item L<Guard>
		2475
		2476	The guard module, when used, will be used to implement
		2477	C<AnyEvent::Util::guard>. This speeds up guards considerably (and uses a
		2478	lot less memory), but otherwise doesn't affect guard operation much. It is
		2479	purely used for performance.
		2480
		2481	=item L<JSON> and L<JSON::XS>
		2482
		2483	One of these modules is required when you want to read or write JSON data
		2484	via L<AnyEvent::Handle>. It is also written in pure-perl, but can take
		2485	advantage of the ultra-high-speed L<JSON::XS> module when it is installed.
		2486
		2487	In fact, L<AnyEvent::Handle> will use L<JSON::XS> by default if it is
		2488	installed.
		2489
		2490	=item L<Net::SSLeay>
		2491
		2492	Implementing TLS/SSL in Perl is certainly interesting, but not very
		2493	worthwhile: If this module is installed, then L<AnyEvent::Handle> (with
		2494	the help of L<AnyEvent::TLS>), gains the ability to do TLS/SSL.
		2495
		2496	=item L<Time::HiRes>
		2497
		2498	This module is part of perl since release 5.008. It will be used when the
		2499	chosen event library does not come with a timing source on it's own. The
		2500	pure-perl event loop (L<AnyEvent::Impl::Perl>) will additionally use it to
		2501	try to use a monotonic clock for timing stability.
		2502
		2503	=back
		2504
1725		2505
1726	=head1 FORK	2506	=head1 FORK
1727		2507
1728	Most event libraries are not fork-safe. The ones who are usually are	2508	Most event libraries are not fork-safe. The ones who are usually are
1729	because they rely on inefficient but fork-safe C<select> or C<poll>	2509	because they rely on inefficient but fork-safe C<select> or C<poll>
1730	calls. Only L<EV> is fully fork-aware.	2510	calls. Only L<EV> is fully fork-aware.
1731		2511
1732	If you have to fork, you must either do so I<before> creating your first	2512	If you have to fork, you must either do so I<before> creating your first
1733	watcher OR you must not use AnyEvent at all in the child.	2513	watcher OR you must not use AnyEvent at all in the child OR you must do
		2514	something completely out of the scope of AnyEvent.
1734		2515
1735		2516
1736	=head1 SECURITY CONSIDERATIONS	2517	=head1 SECURITY CONSIDERATIONS
1737		2518
1738	AnyEvent can be forced to load any event model via	2519	AnyEvent can be forced to load any event model via
…		…
1750	use AnyEvent;	2531	use AnyEvent;
1751		2532
1752	Similar considerations apply to $ENV{PERL_ANYEVENT_VERBOSE}, as that can	2533	Similar considerations apply to $ENV{PERL_ANYEVENT_VERBOSE}, as that can
1753	be used to probe what backend is used and gain other information (which is	2534	be used to probe what backend is used and gain other information (which is
1754	probably even less useful to an attacker than PERL_ANYEVENT_MODEL), and	2535	probably even less useful to an attacker than PERL_ANYEVENT_MODEL), and
1755	$ENV{PERL_ANYEGENT_STRICT}.	2536	$ENV{PERL_ANYEVENT_STRICT}.
		2537
		2538	Note that AnyEvent will remove I<all> environment variables starting with
		2539	C<PERL_ANYEVENT_> from C<%ENV> when it is loaded while taint mode is
		2540	enabled.
1756		2541
1757		2542
1758	=head1 BUGS	2543	=head1 BUGS
1759		2544
1760	Perl 5.8 has numerous memleaks that sometimes hit this module and are hard	2545	Perl 5.8 has numerous memleaks that sometimes hit this module and are hard
1761	to work around. If you suffer from memleaks, first upgrade to Perl 5.10	2546	to work around. If you suffer from memleaks, first upgrade to Perl 5.10
1762	and check wether the leaks still show up. (Perl 5.10.0 has other annoying	2547	and check wether the leaks still show up. (Perl 5.10.0 has other annoying
1763	mamleaks, such as leaking on C<map> and C<grep> but it is usually not as	2548	memleaks, such as leaking on C<map> and C<grep> but it is usually not as
1764	pronounced).	2549	pronounced).
1765		2550
1766		2551
1767	=head1 SEE ALSO	2552	=head1 SEE ALSO
1768		2553
…		…
1772	L<Glib>, L<Tk>, L<Event::Lib>, L<Qt>, L<POE>.	2557	L<Glib>, L<Tk>, L<Event::Lib>, L<Qt>, L<POE>.
1773		2558
1774	Implementations: L<AnyEvent::Impl::EV>, L<AnyEvent::Impl::Event>,	2559	Implementations: L<AnyEvent::Impl::EV>, L<AnyEvent::Impl::Event>,
1775	L<AnyEvent::Impl::Glib>, L<AnyEvent::Impl::Tk>, L<AnyEvent::Impl::Perl>,	2560	L<AnyEvent::Impl::Glib>, L<AnyEvent::Impl::Tk>, L<AnyEvent::Impl::Perl>,
1776	L<AnyEvent::Impl::EventLib>, L<AnyEvent::Impl::Qt>,	2561	L<AnyEvent::Impl::EventLib>, L<AnyEvent::Impl::Qt>,
1777	L<AnyEvent::Impl::POE>.	2562	L<AnyEvent::Impl::POE>, L<AnyEvent::Impl::IOAsync>, L<Anyevent::Impl::Irssi>.
1778		2563
1779	Non-blocking file handles, sockets, TCP clients and	2564	Non-blocking file handles, sockets, TCP clients and
1780	servers: L<AnyEvent::Handle>, L<AnyEvent::Socket>.	2565	servers: L<AnyEvent::Handle>, L<AnyEvent::Socket>, L<AnyEvent::TLS>.
1781		2566
1782	Asynchronous DNS: L<AnyEvent::DNS>.	2567	Asynchronous DNS: L<AnyEvent::DNS>.
1783		2568
1784	Coroutine support: L<Coro>, L<Coro::AnyEvent>, L<Coro::EV>, L<Coro::Event>,	2569	Coroutine support: L<Coro>, L<Coro::AnyEvent>, L<Coro::EV>,
		2570	L<Coro::Event>,
1785		2571
1786	Nontrivial usage examples: L<Net::FCP>, L<Net::XMPP2>, L<AnyEvent::DNS>.	2572	Nontrivial usage examples: L<AnyEvent::GPSD>, L<AnyEvent::XMPP>,
		2573	L<AnyEvent::HTTP>.
1787		2574
1788		2575
1789	=head1 AUTHOR	2576	=head1 AUTHOR
1790		2577
1791	Marc Lehmann <schmorp@schmorp.de>	2578	Marc Lehmann <schmorp@schmorp.de>

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines