ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent.pm

Comparing AnyEvent/lib/AnyEvent.pm (file contents):
Revision 1.137 by root, Mon May 26 03:27:52 2008 UTC vs.
Revision 1.269 by root, Fri Jul 31 20:16:29 2009 UTC

1	=head1 => NAME	1	=head1 NAME
2		2
3	AnyEvent - provide framework for multiple event loops	3	AnyEvent - the DBI of event loop programming
4		4
5	EV, Event, Glib, Tk, Perl, Event::Lib, Qt, POE - various supported event loops	5	EV, Event, Glib, Tk, Perl, Event::Lib, Irssi, rxvt-unicode, IO::Async, Qt
		6	and POE are various supported event loops/environments.
6		7
7	=head1 SYNOPSIS	8	=head1 SYNOPSIS
8		9
9	use AnyEvent;	10	use AnyEvent;
10		11
		12	# file descriptor readable
11	my $w = AnyEvent->io (fh => $fh, poll => "r|w", cb => sub {	13	my $w = AnyEvent->io (fh => $fh, poll => "r", cb => sub { ... });
		14
		15	# one-shot or repeating timers
		16	my $w = AnyEvent->timer (after => $seconds, cb => sub { ... });
		17	my $w = AnyEvent->timer (after => $seconds, interval => $seconds, cb => ...
		18
		19	print AnyEvent->now; # prints current event loop time
		20	print AnyEvent->time; # think Time::HiRes::time or simply CORE::time.
		21
		22	# POSIX signal
		23	my $w = AnyEvent->signal (signal => "TERM", cb => sub { ... });
		24
		25	# child process exit
		26	my $w = AnyEvent->child (pid => $pid, cb => sub {
		27	my ($pid, $status) = @_;
12	...	28	...
13	});	29	});
14		30
15	my $w = AnyEvent->timer (after => $seconds, cb => sub {	31	# called when event loop idle (if applicable)
16	...	32	my $w = AnyEvent->idle (cb => sub { ... });
17	});
18		33
19	my $w = AnyEvent->condvar; # stores whether a condition was flagged	34	my $w = AnyEvent->condvar; # stores whether a condition was flagged
20	$w->send; # wake up current and all future recv's	35	$w->send; # wake up current and all future recv's
21	$w->recv; # enters "main loop" till $condvar gets ->send	36	$w->recv; # enters "main loop" till $condvar gets ->send
		37	# use a condvar in callback mode:
		38	$w->cb (sub { $_[0]->recv });
		39
		40	=head1 INTRODUCTION/TUTORIAL
		41
		42	This manpage is mainly a reference manual. If you are interested
		43	in a tutorial or some gentle introduction, have a look at the
		44	L<AnyEvent::Intro> manpage.
		45
		46	=head1 SUPPORT
		47
		48	There is a mailinglist for discussing all things AnyEvent, and an IRC
		49	channel, too.
		50
		51	See the AnyEvent project page at the B<Schmorpforge Ta-Sa Software
		52	Repository>, at L<http://anyevent.schmorp.de>, for more info.
22		53
23	=head1 WHY YOU SHOULD USE THIS MODULE (OR NOT)	54	=head1 WHY YOU SHOULD USE THIS MODULE (OR NOT)
24		55
25	Glib, POE, IO::Async, Event... CPAN offers event models by the dozen	56	Glib, POE, IO::Async, Event... CPAN offers event models by the dozen
26	nowadays. So what is different about AnyEvent?	57	nowadays. So what is different about AnyEvent?
27		58
28	Executive Summary: AnyEvent is I<compatible>, AnyEvent is I<free of	59	Executive Summary: AnyEvent is I<compatible>, AnyEvent is I<free of
29	policy> and AnyEvent is I<small and efficient>.	60	policy> and AnyEvent is I<small and efficient>.
30		61
31	First and foremost, I<AnyEvent is not an event model> itself, it only	62	First and foremost, I<AnyEvent is not an event model> itself, it only
32	interfaces to whatever event model the main program happens to use in a	63	interfaces to whatever event model the main program happens to use, in a
33	pragmatic way. For event models and certain classes of immortals alike,	64	pragmatic way. For event models and certain classes of immortals alike,
34	the statement "there can only be one" is a bitter reality: In general,	65	the statement "there can only be one" is a bitter reality: In general,
35	only one event loop can be active at the same time in a process. AnyEvent	66	only one event loop can be active at the same time in a process. AnyEvent
36	helps hiding the differences between those event loops.	67	cannot change this, but it can hide the differences between those event
		68	loops.
37		69
38	The goal of AnyEvent is to offer module authors the ability to do event	70	The goal of AnyEvent is to offer module authors the ability to do event
39	programming (waiting for I/O or timer events) without subscribing to a	71	programming (waiting for I/O or timer events) without subscribing to a
40	religion, a way of living, and most importantly: without forcing your	72	religion, a way of living, and most importantly: without forcing your
41	module users into the same thing by forcing them to use the same event	73	module users into the same thing by forcing them to use the same event
42	model you use.	74	model you use.
43		75
44	For modules like POE or IO::Async (which is a total misnomer as it is	76	For modules like POE or IO::Async (which is a total misnomer as it is
45	actually doing all I/O I<synchronously>...), using them in your module is	77	actually doing all I/O I<synchronously>...), using them in your module is
46	like joining a cult: After you joined, you are dependent on them and you	78	like joining a cult: After you joined, you are dependent on them and you
47	cannot use anything else, as it is simply incompatible to everything that	79	cannot use anything else, as they are simply incompatible to everything
48	isn't itself. What's worse, all the potential users of your module are	80	that isn't them. What's worse, all the potential users of your
49	I<also> forced to use the same event loop you use.	81	module are I<also> forced to use the same event loop you use.
50		82
51	AnyEvent is different: AnyEvent + POE works fine. AnyEvent + Glib works	83	AnyEvent is different: AnyEvent + POE works fine. AnyEvent + Glib works
52	fine. AnyEvent + Tk works fine etc. etc. but none of these work together	84	fine. AnyEvent + Tk works fine etc. etc. but none of these work together
53	with the rest: POE + IO::Async? no go. Tk + Event? no go. Again: if	85	with the rest: POE + IO::Async? No go. Tk + Event? No go. Again: if
54	your module uses one of those, every user of your module has to use it,	86	your module uses one of those, every user of your module has to use it,
55	too. But if your module uses AnyEvent, it works transparently with all	87	too. But if your module uses AnyEvent, it works transparently with all
56	event models it supports (including stuff like POE and IO::Async, as long	88	event models it supports (including stuff like IO::Async, as long as those
57	as those use one of the supported event loops. It is trivial to add new	89	use one of the supported event loops. It is trivial to add new event loops
58	event loops to AnyEvent, too, so it is future-proof).	90	to AnyEvent, too, so it is future-proof).
59		91
60	In addition to being free of having to use I<the one and only true event	92	In addition to being free of having to use I<the one and only true event
61	model>, AnyEvent also is free of bloat and policy: with POE or similar	93	model>, AnyEvent also is free of bloat and policy: with POE or similar
62	modules, you get an enormous amount of code and strict rules you have to	94	modules, you get an enormous amount of code and strict rules you have to
63	follow. AnyEvent, on the other hand, is lean and up to the point, by only	95	follow. AnyEvent, on the other hand, is lean and up to the point, by only
64	offering the functionality that is necessary, in as thin as a wrapper as	96	offering the functionality that is necessary, in as thin as a wrapper as
65	technically possible.	97	technically possible.
66		98
		99	Of course, AnyEvent comes with a big (and fully optional!) toolbox
		100	of useful functionality, such as an asynchronous DNS resolver, 100%
		101	non-blocking connects (even with TLS/SSL, IPv6 and on broken platforms
		102	such as Windows) and lots of real-world knowledge and workarounds for
		103	platform bugs and differences.
		104
67	Of course, if you want lots of policy (this can arguably be somewhat	105	Now, if you I<do want> lots of policy (this can arguably be somewhat
68	useful) and you want to force your users to use the one and only event	106	useful) and you want to force your users to use the one and only event
69	model, you should I<not> use this module.	107	model, you should I<not> use this module.
70		108
71	=head1 DESCRIPTION	109	=head1 DESCRIPTION
72		110
…		…
102	starts using it, all bets are off. Maybe you should tell their authors to	140	starts using it, all bets are off. Maybe you should tell their authors to
103	use AnyEvent so their modules work together with others seamlessly...	141	use AnyEvent so their modules work together with others seamlessly...
104		142
105	The pure-perl implementation of AnyEvent is called	143	The pure-perl implementation of AnyEvent is called
106	C<AnyEvent::Impl::Perl>. Like other event modules you can load it	144	C<AnyEvent::Impl::Perl>. Like other event modules you can load it
107	explicitly.	145	explicitly and enjoy the high availability of that event loop :)
108		146
109	=head1 WATCHERS	147	=head1 WATCHERS
110		148
111	AnyEvent has the central concept of a I<watcher>, which is an object that	149	AnyEvent has the central concept of a I<watcher>, which is an object that
112	stores relevant data for each kind of event you are waiting for, such as	150	stores relevant data for each kind of event you are waiting for, such as
…		…
115	These watchers are normal Perl objects with normal Perl lifetime. After	153	These watchers are normal Perl objects with normal Perl lifetime. After
116	creating a watcher it will immediately "watch" for events and invoke the	154	creating a watcher it will immediately "watch" for events and invoke the
117	callback when the event occurs (of course, only when the event model	155	callback when the event occurs (of course, only when the event model
118	is in control).	156	is in control).
119		157
		158	Note that B<callbacks must not permanently change global variables>
		159	potentially in use by the event loop (such as C<$_> or C<$[>) and that B<<
		160	callbacks must not C<die> >>. The former is good programming practise in
		161	Perl and the latter stems from the fact that exception handling differs
		162	widely between event loops.
		163
120	To disable the watcher you have to destroy it (e.g. by setting the	164	To disable the watcher you have to destroy it (e.g. by setting the
121	variable you store it in to C<undef> or otherwise deleting all references	165	variable you store it in to C<undef> or otherwise deleting all references
122	to it).	166	to it).
123		167
124	All watchers are created by calling a method on the C<AnyEvent> class.	168	All watchers are created by calling a method on the C<AnyEvent> class.
…		…
126	Many watchers either are used with "recursion" (repeating timers for	170	Many watchers either are used with "recursion" (repeating timers for
127	example), or need to refer to their watcher object in other ways.	171	example), or need to refer to their watcher object in other ways.
128		172
129	An any way to achieve that is this pattern:	173	An any way to achieve that is this pattern:
130		174
131	my $w; $w = AnyEvent->type (arg => value ..., cb => sub {	175	my $w; $w = AnyEvent->type (arg => value ..., cb => sub {
132	# you can use $w here, for example to undef it	176	# you can use $w here, for example to undef it
133	undef $w;	177	undef $w;
134	});	178	});
135		179
136	Note that C<my $w; $w => combination. This is necessary because in Perl,	180	Note that C<my $w; $w => combination. This is necessary because in Perl,
137	my variables are only visible after the statement in which they are	181	my variables are only visible after the statement in which they are
138	declared.	182	declared.
139		183
140	=head2 I/O WATCHERS	184	=head2 I/O WATCHERS
141		185
		186	$w = AnyEvent->io (
		187	fh => <filehandle_or_fileno>,
		188	poll => <"r" or "w">,
		189	cb => <callback>,
		190	);
		191
142	You can create an I/O watcher by calling the C<< AnyEvent->io >> method	192	You can create an I/O watcher by calling the C<< AnyEvent->io >> method
143	with the following mandatory key-value pairs as arguments:	193	with the following mandatory key-value pairs as arguments:
144		194
145	C<fh> the Perl I<file handle> (I<not> file descriptor) to watch	195	C<fh> is the Perl I<file handle> (or a naked file descriptor) to watch
		196	for events (AnyEvent might or might not keep a reference to this file
		197	handle). Note that only file handles pointing to things for which
		198	non-blocking operation makes sense are allowed. This includes sockets,
		199	most character devices, pipes, fifos and so on, but not for example files
		200	or block devices.
		201
146	for events. C<poll> must be a string that is either C<r> or C<w>,	202	C<poll> must be a string that is either C<r> or C<w>, which creates a
147	which creates a watcher waiting for "r"eadable or "w"ritable events,	203	watcher waiting for "r"eadable or "w"ritable events, respectively.
		204
148	respectively. C<cb> is the callback to invoke each time the file handle	205	C<cb> is the callback to invoke each time the file handle becomes ready.
149	becomes ready.
150		206
151	Although the callback might get passed parameters, their value and	207	Although the callback might get passed parameters, their value and
152	presence is undefined and you cannot rely on them. Portable AnyEvent	208	presence is undefined and you cannot rely on them. Portable AnyEvent
153	callbacks cannot use arguments passed to I/O watcher callbacks.	209	callbacks cannot use arguments passed to I/O watcher callbacks.
154		210
…		…
158		214
159	Some event loops issue spurious readyness notifications, so you should	215	Some event loops issue spurious readyness notifications, so you should
160	always use non-blocking calls when reading/writing from/to your file	216	always use non-blocking calls when reading/writing from/to your file
161	handles.	217	handles.
162		218
163	Example:
164
165	# wait for readability of STDIN, then read a line and disable the watcher	219	Example: wait for readability of STDIN, then read a line and disable the
		220	watcher.
		221
166	my $w; $w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {	222	my $w; $w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {
167	chomp (my $input = <STDIN>);	223	chomp (my $input = <STDIN>);
168	warn "read: $input\n";	224	warn "read: $input\n";
169	undef $w;	225	undef $w;
170	});	226	});
171		227
172	=head2 TIME WATCHERS	228	=head2 TIME WATCHERS
173		229
		230	$w = AnyEvent->timer (after => <seconds>, cb => <callback>);
		231
		232	$w = AnyEvent->timer (
		233	after => <fractional_seconds>,
		234	interval => <fractional_seconds>,
		235	cb => <callback>,
		236	);
		237
174	You can create a time watcher by calling the C<< AnyEvent->timer >>	238	You can create a time watcher by calling the C<< AnyEvent->timer >>
175	method with the following mandatory arguments:	239	method with the following mandatory arguments:
176		240
177	C<after> specifies after how many seconds (fractional values are	241	C<after> specifies after how many seconds (fractional values are
178	supported) the callback should be invoked. C<cb> is the callback to invoke	242	supported) the callback should be invoked. C<cb> is the callback to invoke
…		…
180		244
181	Although the callback might get passed parameters, their value and	245	Although the callback might get passed parameters, their value and
182	presence is undefined and you cannot rely on them. Portable AnyEvent	246	presence is undefined and you cannot rely on them. Portable AnyEvent
183	callbacks cannot use arguments passed to time watcher callbacks.	247	callbacks cannot use arguments passed to time watcher callbacks.
184		248
185	The timer callback will be invoked at most once: if you want a repeating	249	The callback will normally be invoked once only. If you specify another
186	timer you have to create a new watcher (this is a limitation by both Tk	250	parameter, C<interval>, as a strictly positive number (> 0), then the
187	and Glib).	251	callback will be invoked regularly at that interval (in fractional
		252	seconds) after the first invocation. If C<interval> is specified with a
		253	false value, then it is treated as if it were missing.
188		254
189	Example:	255	The callback will be rescheduled before invoking the callback, but no
		256	attempt is done to avoid timer drift in most backends, so the interval is
		257	only approximate.
190		258
191	# fire an event after 7.7 seconds	259	Example: fire an event after 7.7 seconds.
		260
192	my $w = AnyEvent->timer (after => 7.7, cb => sub {	261	my $w = AnyEvent->timer (after => 7.7, cb => sub {
193	warn "timeout\n";	262	warn "timeout\n";
194	});	263	});
195		264
196	# to cancel the timer:	265	# to cancel the timer:
197	undef $w;	266	undef $w;
198		267
199	Example 2:
200
201	# fire an event after 0.5 seconds, then roughly every second	268	Example 2: fire an event after 0.5 seconds, then roughly every second.
202	my $w;
203		269
204	my $cb = sub {
205	# cancel the old timer while creating a new one
206	$w = AnyEvent->timer (after => 1, cb => $cb);	270	my $w = AnyEvent->timer (after => 0.5, interval => 1, cb => sub {
		271	warn "timeout\n";
207	};	272	};
208
209	# start the "loop" by creating the first watcher
210	$w = AnyEvent->timer (after => 0.5, cb => $cb);
211		273
212	=head3 TIMING ISSUES	274	=head3 TIMING ISSUES
213		275
214	There are two ways to handle timers: based on real time (relative, "fire	276	There are two ways to handle timers: based on real time (relative, "fire
215	in 10 seconds") and based on wallclock time (absolute, "fire at 12	277	in 10 seconds") and based on wallclock time (absolute, "fire at 12
…		…
227	timers.	289	timers.
228		290
229	AnyEvent always prefers relative timers, if available, matching the	291	AnyEvent always prefers relative timers, if available, matching the
230	AnyEvent API.	292	AnyEvent API.
231		293
		294	AnyEvent has two additional methods that return the "current time":
		295
		296	=over 4
		297
		298	=item AnyEvent->time
		299
		300	This returns the "current wallclock time" as a fractional number of
		301	seconds since the Epoch (the same thing as C<time> or C<Time::HiRes::time>
		302	return, and the result is guaranteed to be compatible with those).
		303
		304	It progresses independently of any event loop processing, i.e. each call
		305	will check the system clock, which usually gets updated frequently.
		306
		307	=item AnyEvent->now
		308
		309	This also returns the "current wallclock time", but unlike C<time>, above,
		310	this value might change only once per event loop iteration, depending on
		311	the event loop (most return the same time as C<time>, above). This is the
		312	time that AnyEvent's timers get scheduled against.
		313
		314	I<In almost all cases (in all cases if you don't care), this is the
		315	function to call when you want to know the current time.>
		316
		317	This function is also often faster then C<< AnyEvent->time >>, and
		318	thus the preferred method if you want some timestamp (for example,
		319	L<AnyEvent::Handle> uses this to update it's activity timeouts).
		320
		321	The rest of this section is only of relevance if you try to be very exact
		322	with your timing, you can skip it without bad conscience.
		323
		324	For a practical example of when these times differ, consider L<Event::Lib>
		325	and L<EV> and the following set-up:
		326
		327	The event loop is running and has just invoked one of your callback at
		328	time=500 (assume no other callbacks delay processing). In your callback,
		329	you wait a second by executing C<sleep 1> (blocking the process for a
		330	second) and then (at time=501) you create a relative timer that fires
		331	after three seconds.
		332
		333	With L<Event::Lib>, C<< AnyEvent->time >> and C<< AnyEvent->now >> will
		334	both return C<501>, because that is the current time, and the timer will
		335	be scheduled to fire at time=504 (C<501> + C<3>).
		336
		337	With L<EV>, C<< AnyEvent->time >> returns C<501> (as that is the current
		338	time), but C<< AnyEvent->now >> returns C<500>, as that is the time the
		339	last event processing phase started. With L<EV>, your timer gets scheduled
		340	to run at time=503 (C<500> + C<3>).
		341
		342	In one sense, L<Event::Lib> is more exact, as it uses the current time
		343	regardless of any delays introduced by event processing. However, most
		344	callbacks do not expect large delays in processing, so this causes a
		345	higher drift (and a lot more system calls to get the current time).
		346
		347	In another sense, L<EV> is more exact, as your timer will be scheduled at
		348	the same time, regardless of how long event processing actually took.
		349
		350	In either case, if you care (and in most cases, you don't), then you
		351	can get whatever behaviour you want with any event loop, by taking the
		352	difference between C<< AnyEvent->time >> and C<< AnyEvent->now >> into
		353	account.
		354
		355	=item AnyEvent->now_update
		356
		357	Some event loops (such as L<EV> or L<AnyEvent::Impl::Perl>) cache
		358	the current time for each loop iteration (see the discussion of L<<
		359	AnyEvent->now >>, above).
		360
		361	When a callback runs for a long time (or when the process sleeps), then
		362	this "current" time will differ substantially from the real time, which
		363	might affect timers and time-outs.
		364
		365	When this is the case, you can call this method, which will update the
		366	event loop's idea of "current time".
		367
		368	Note that updating the time I<might> cause some events to be handled.
		369
		370	=back
		371
232	=head2 SIGNAL WATCHERS	372	=head2 SIGNAL WATCHERS
233		373
		374	$w = AnyEvent->signal (signal => <uppercase_signal_name>, cb => <callback>);
		375
234	You can watch for signals using a signal watcher, C<signal> is the signal	376	You can watch for signals using a signal watcher, C<signal> is the signal
235	I<name> without any C<SIG> prefix, C<cb> is the Perl callback to	377	I<name> in uppercase and without any C<SIG> prefix, C<cb> is the Perl
236	be invoked whenever a signal occurs.	378	callback to be invoked whenever a signal occurs.
237		379
238	Although the callback might get passed parameters, their value and	380	Although the callback might get passed parameters, their value and
239	presence is undefined and you cannot rely on them. Portable AnyEvent	381	presence is undefined and you cannot rely on them. Portable AnyEvent
240	callbacks cannot use arguments passed to signal watcher callbacks.	382	callbacks cannot use arguments passed to signal watcher callbacks.
241		383
…		…
243	invocation, and callback invocation will be synchronous. Synchronous means	385	invocation, and callback invocation will be synchronous. Synchronous means
244	that it might take a while until the signal gets handled by the process,	386	that it might take a while until the signal gets handled by the process,
245	but it is guaranteed not to interrupt any other callbacks.	387	but it is guaranteed not to interrupt any other callbacks.
246		388
247	The main advantage of using these watchers is that you can share a signal	389	The main advantage of using these watchers is that you can share a signal
248	between multiple watchers.	390	between multiple watchers, and AnyEvent will ensure that signals will not
		391	interrupt your program at bad times.
249		392
250	This watcher might use C<%SIG>, so programs overwriting those signals	393	This watcher might use C<%SIG> (depending on the event loop used),
251	directly will likely not work correctly.	394	so programs overwriting those signals directly will likely not work
		395	correctly.
252		396
253	Example: exit on SIGINT	397	Example: exit on SIGINT
254		398
255	my $w = AnyEvent->signal (signal => "INT", cb => sub { exit 1 });	399	my $w = AnyEvent->signal (signal => "INT", cb => sub { exit 1 });
256		400
		401	=head3 Signal Races, Delays and Workarounds
		402
		403	Many event loops (e.g. Glib, Tk, Qt, IO::Async) do not support attaching
		404	callbacks to signals in a generic way, which is a pity, as you cannot
		405	do race-free signal handling in perl, requiring C libraries for
		406	this. AnyEvent will try to do it's best, which means in some cases,
		407	signals will be delayed. The maximum time a signal might be delayed is
		408	specified in C<$AnyEvent::MAX_SIGNAL_LATENCY> (default: 10 seconds). This
		409	variable can be changed only before the first signal watcher is created,
		410	and should be left alone otherwise. This variable determines how often
		411	AnyEvent polls for signals (in case a wake-up was missed). Higher values
		412	will cause fewer spurious wake-ups, which is better for power and CPU
		413	saving.
		414
		415	All these problems can be avoided by installing the optional
		416	L<Async::Interrupt> module, which works with most event loops. It will not
		417	work with inherently broken event loops such as L<Event> or L<Event::Lib>
		418	(and not with L<POE> currently, as POE does it's own workaround with
		419	one-second latency). For those, you just have to suffer the delays.
		420
257	=head2 CHILD PROCESS WATCHERS	421	=head2 CHILD PROCESS WATCHERS
258		422
		423	$w = AnyEvent->child (pid => <process id>, cb => <callback>);
		424
259	You can also watch on a child process exit and catch its exit status.	425	You can also watch on a child process exit and catch its exit status.
260		426
261	The child process is specified by the C<pid> argument (if set to C<0>, it	427	The child process is specified by the C<pid> argument (one some backends,
262	watches for any child process exit). The watcher will trigger as often	428	using C<0> watches for any child process exit, on others this will
263	as status change for the child are received. This works by installing a	429	croak). The watcher will be triggered only when the child process has
264	signal handler for C<SIGCHLD>. The callback will be called with the pid	430	finished and an exit status is available, not on any trace events
265	and exit status (as returned by waitpid), so unlike other watcher types,	431	(stopped/continued).
266	you I<can> rely on child watcher callback arguments.	432
		433	The callback will be called with the pid and exit status (as returned by
		434	waitpid), so unlike other watcher types, you I<can> rely on child watcher
		435	callback arguments.
		436
		437	This watcher type works by installing a signal handler for C<SIGCHLD>,
		438	and since it cannot be shared, nothing else should use SIGCHLD or reap
		439	random child processes (waiting for specific child processes, e.g. inside
		440	C<system>, is just fine).
267		441
268	There is a slight catch to child watchers, however: you usually start them	442	There is a slight catch to child watchers, however: you usually start them
269	I<after> the child process was created, and this means the process could	443	I<after> the child process was created, and this means the process could
270	have exited already (and no SIGCHLD will be sent anymore).	444	have exited already (and no SIGCHLD will be sent anymore).
271		445
272	Not all event models handle this correctly (POE doesn't), but even for	446	Not all event models handle this correctly (neither POE nor IO::Async do,
		447	see their AnyEvent::Impl manpages for details), but even for event models
273	event models that I<do> handle this correctly, they usually need to be	448	that I<do> handle this correctly, they usually need to be loaded before
274	loaded before the process exits (i.e. before you fork in the first place).	449	the process exits (i.e. before you fork in the first place). AnyEvent's
		450	pure perl event loop handles all cases correctly regardless of when you
		451	start the watcher.
275		452
276	This means you cannot create a child watcher as the very first thing in an	453	This means you cannot create a child watcher as the very first
277	AnyEvent program, you I<have> to create at least one watcher before you	454	thing in an AnyEvent program, you I<have> to create at least one
278	C<fork> the child (alternatively, you can call C<AnyEvent::detect>).	455	watcher before you C<fork> the child (alternatively, you can call
		456	C<AnyEvent::detect>).
		457
		458	As most event loops do not support waiting for child events, they will be
		459	emulated by AnyEvent in most cases, in which the latency and race problems
		460	mentioned in the description of signal watchers apply.
279		461
280	Example: fork a process and wait for it	462	Example: fork a process and wait for it
281		463
282	my $done = AnyEvent->condvar;	464	my $done = AnyEvent->condvar;
283		465
284	my $pid = fork or exit 5;	466	my $pid = fork or exit 5;
285		467
286	my $w = AnyEvent->child (	468	my $w = AnyEvent->child (
287	pid => $pid,	469	pid => $pid,
288	cb => sub {	470	cb => sub {
289	my ($pid, $status) = @_;	471	my ($pid, $status) = @_;
290	warn "pid $pid exited with status $status";	472	warn "pid $pid exited with status $status";
291	$done->send;	473	$done->send;
292	},	474	},
293	);	475	);
294		476
295	# do something else, then wait for process exit	477	# do something else, then wait for process exit
296	$done->recv;	478	$done->recv;
		479
		480	=head2 IDLE WATCHERS
		481
		482	$w = AnyEvent->idle (cb => <callback>);
		483
		484	Sometimes there is a need to do something, but it is not so important
		485	to do it instantly, but only when there is nothing better to do. This
		486	"nothing better to do" is usually defined to be "no other events need
		487	attention by the event loop".
		488
		489	Idle watchers ideally get invoked when the event loop has nothing
		490	better to do, just before it would block the process to wait for new
		491	events. Instead of blocking, the idle watcher is invoked.
		492
		493	Most event loops unfortunately do not really support idle watchers (only
		494	EV, Event and Glib do it in a usable fashion) - for the rest, AnyEvent
		495	will simply call the callback "from time to time".
		496
		497	Example: read lines from STDIN, but only process them when the
		498	program is otherwise idle:
		499
		500	my @lines; # read data
		501	my $idle_w;
		502	my $io_w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {
		503	push @lines, scalar <STDIN>;
		504
		505	# start an idle watcher, if not already done
		506	$idle_w ||= AnyEvent->idle (cb => sub {
		507	# handle only one line, when there are lines left
		508	if (my $line = shift @lines) {
		509	print "handled when idle: $line";
		510	} else {
		511	# otherwise disable the idle watcher again
		512	undef $idle_w;
		513	}
		514	});
		515	});
297		516
298	=head2 CONDITION VARIABLES	517	=head2 CONDITION VARIABLES
		518
		519	$cv = AnyEvent->condvar;
		520
		521	$cv->send (<list>);
		522	my @res = $cv->recv;
299		523
300	If you are familiar with some event loops you will know that all of them	524	If you are familiar with some event loops you will know that all of them
301	require you to run some blocking "loop", "run" or similar function that	525	require you to run some blocking "loop", "run" or similar function that
302	will actively watch for new events and call your callbacks.	526	will actively watch for new events and call your callbacks.
303		527
304	AnyEvent is different, it expects somebody else to run the event loop and	528	AnyEvent is slightly different: it expects somebody else to run the event
305	will only block when necessary (usually when told by the user).	529	loop and will only block when necessary (usually when told by the user).
306		530
307	The instrument to do that is called a "condition variable", so called	531	The instrument to do that is called a "condition variable", so called
308	because they represent a condition that must become true.	532	because they represent a condition that must become true.
		533
		534	Now is probably a good time to look at the examples further below.
309		535
310	Condition variables can be created by calling the C<< AnyEvent->condvar	536	Condition variables can be created by calling the C<< AnyEvent->condvar
311	>> method, usually without arguments. The only argument pair allowed is	537	>> method, usually without arguments. The only argument pair allowed is
312	C<cb>, which specifies a callback to be called when the condition variable	538	C<cb>, which specifies a callback to be called when the condition variable
313	becomes true.	539	becomes true, with the condition variable as the first argument (but not
		540	the results).
314		541
315	After creation, the condition variable is "false" until it becomes "true"	542	After creation, the condition variable is "false" until it becomes "true"
316	by calling the C<send> method (or calling the condition variable as if it	543	by calling the C<send> method (or calling the condition variable as if it
317	were a callback, read about the caveats in the description for the C<<	544	were a callback, read about the caveats in the description for the C<<
318	->send >> method).	545	->send >> method).
…		…
320	Condition variables are similar to callbacks, except that you can	547	Condition variables are similar to callbacks, except that you can
321	optionally wait for them. They can also be called merge points - points	548	optionally wait for them. They can also be called merge points - points
322	in time where multiple outstanding events have been processed. And yet	549	in time where multiple outstanding events have been processed. And yet
323	another way to call them is transactions - each condition variable can be	550	another way to call them is transactions - each condition variable can be
324	used to represent a transaction, which finishes at some point and delivers	551	used to represent a transaction, which finishes at some point and delivers
325	a result.	552	a result. And yet some people know them as "futures" - a promise to
		553	compute/deliver something that you can wait for.
326		554
327	Condition variables are very useful to signal that something has finished,	555	Condition variables are very useful to signal that something has finished,
328	for example, if you write a module that does asynchronous http requests,	556	for example, if you write a module that does asynchronous http requests,
329	then a condition variable would be the ideal candidate to signal the	557	then a condition variable would be the ideal candidate to signal the
330	availability of results. The user can either act when the callback is	558	availability of results. The user can either act when the callback is
…		…
364	after => 1,	592	after => 1,
365	cb => sub { $result_ready->send },	593	cb => sub { $result_ready->send },
366	);	594	);
367		595
368	# this "blocks" (while handling events) till the callback	596	# this "blocks" (while handling events) till the callback
369	# calls send	597	# calls -<send
370	$result_ready->recv;	598	$result_ready->recv;
371		599
372	Example: wait for a timer, but take advantage of the fact that	600	Example: wait for a timer, but take advantage of the fact that condition
373	condition variables are also code references.	601	variables are also callable directly.
374		602
375	my $done = AnyEvent->condvar;	603	my $done = AnyEvent->condvar;
376	my $delay = AnyEvent->timer (after => 5, cb => $done);	604	my $delay = AnyEvent->timer (after => 5, cb => $done);
377	$done->recv;	605	$done->recv;
		606
		607	Example: Imagine an API that returns a condvar and doesn't support
		608	callbacks. This is how you make a synchronous call, for example from
		609	the main program:
		610
		611	use AnyEvent::CouchDB;
		612
		613	...
		614
		615	my @info = $couchdb->info->recv;
		616
		617	And this is how you would just set a callback to be called whenever the
		618	results are available:
		619
		620	$couchdb->info->cb (sub {
		621	my @info = $_[0]->recv;
		622	});
378		623
379	=head3 METHODS FOR PRODUCERS	624	=head3 METHODS FOR PRODUCERS
380		625
381	These methods should only be used by the producing side, i.e. the	626	These methods should only be used by the producing side, i.e. the
382	code/module that eventually sends the signal. Note that it is also	627	code/module that eventually sends the signal. Note that it is also
…		…
395	immediately from within send.	640	immediately from within send.
396		641
397	Any arguments passed to the C<send> call will be returned by all	642	Any arguments passed to the C<send> call will be returned by all
398	future C<< ->recv >> calls.	643	future C<< ->recv >> calls.
399		644
400	Condition variables are overloaded so one can call them directly	645	Condition variables are overloaded so one can call them directly (as if
401	(as a code reference). Calling them directly is the same as calling	646	they were a code reference). Calling them directly is the same as calling
402	C<send>. Note, however, that many C-based event loops do not handle	647	C<send>.
403	overloading, so as tempting as it may be, passing a condition variable
404	instead of a callback does not work. Both the pure perl and EV loops
405	support overloading, however, as well as all functions that use perl to
406	invoke a callback (as in L<AnyEvent::Socket> and L<AnyEvent::DNS> for
407	example).
408		648
409	=item $cv->croak ($error)	649	=item $cv->croak ($error)
410		650
411	Similar to send, but causes all call's to C<< ->recv >> to invoke	651	Similar to send, but causes all call's to C<< ->recv >> to invoke
412	C<Carp::croak> with the given error message/object/scalar.	652	C<Carp::croak> with the given error message/object/scalar.
413		653
414	This can be used to signal any errors to the condition variable	654	This can be used to signal any errors to the condition variable
415	user/consumer.	655	user/consumer. Doing it this way instead of calling C<croak> directly
		656	delays the error detetcion, but has the overwhelmign advantage that it
		657	diagnoses the error at the place where the result is expected, and not
		658	deep in some event clalback without connection to the actual code causing
		659	the problem.
416		660
417	=item $cv->begin ([group callback])	661	=item $cv->begin ([group callback])
418		662
419	=item $cv->end	663	=item $cv->end
420
421	These two methods are EXPERIMENTAL and MIGHT CHANGE.
422		664
423	These two methods can be used to combine many transactions/events into	665	These two methods can be used to combine many transactions/events into
424	one. For example, a function that pings many hosts in parallel might want	666	one. For example, a function that pings many hosts in parallel might want
425	to use a condition variable for the whole process.	667	to use a condition variable for the whole process.
426		668
…		…
428	C<< ->end >> will decrement it. If the counter reaches C<0> in C<< ->end	670	C<< ->end >> will decrement it. If the counter reaches C<0> in C<< ->end
429	>>, the (last) callback passed to C<begin> will be executed. That callback	671	>>, the (last) callback passed to C<begin> will be executed. That callback
430	is I<supposed> to call C<< ->send >>, but that is not required. If no	672	is I<supposed> to call C<< ->send >>, but that is not required. If no
431	callback was set, C<send> will be called without any arguments.	673	callback was set, C<send> will be called without any arguments.
432		674
433	Let's clarify this with the ping example:	675	You can think of C<< $cv->send >> giving you an OR condition (one call
		676	sends), while C<< $cv->begin >> and C<< $cv->end >> giving you an AND
		677	condition (all C<begin> calls must be C<end>'ed before the condvar sends).
		678
		679	Let's start with a simple example: you have two I/O watchers (for example,
		680	STDOUT and STDERR for a program), and you want to wait for both streams to
		681	close before activating a condvar:
		682
		683	my $cv = AnyEvent->condvar;
		684
		685	$cv->begin; # first watcher
		686	my $w1 = AnyEvent->io (fh => $fh1, cb => sub {
		687	defined sysread $fh1, my $buf, 4096
		688	or $cv->end;
		689	});
		690
		691	$cv->begin; # second watcher
		692	my $w2 = AnyEvent->io (fh => $fh2, cb => sub {
		693	defined sysread $fh2, my $buf, 4096
		694	or $cv->end;
		695	});
		696
		697	$cv->recv;
		698
		699	This works because for every event source (EOF on file handle), there is
		700	one call to C<begin>, so the condvar waits for all calls to C<end> before
		701	sending.
		702
		703	The ping example mentioned above is slightly more complicated, as the
		704	there are results to be passwd back, and the number of tasks that are
		705	begung can potentially be zero:
434		706
435	my $cv = AnyEvent->condvar;	707	my $cv = AnyEvent->condvar;
436		708
437	my %result;	709	my %result;
438	$cv->begin (sub { $cv->send (\%result) });	710	$cv->begin (sub { $cv->send (\%result) });
…		…
458	loop, which serves two important purposes: first, it sets the callback	730	loop, which serves two important purposes: first, it sets the callback
459	to be called once the counter reaches C<0>, and second, it ensures that	731	to be called once the counter reaches C<0>, and second, it ensures that
460	C<send> is called even when C<no> hosts are being pinged (the loop	732	C<send> is called even when C<no> hosts are being pinged (the loop
461	doesn't execute once).	733	doesn't execute once).
462		734
463	This is the general pattern when you "fan out" into multiple subrequests:	735	This is the general pattern when you "fan out" into multiple (but
464	use an outer C<begin>/C<end> pair to set the callback and ensure C<end>	736	potentially none) subrequests: use an outer C<begin>/C<end> pair to set
465	is called at least once, and then, for each subrequest you start, call	737	the callback and ensure C<end> is called at least once, and then, for each
466	C<begin> and for each subrequest you finish, call C<end>.	738	subrequest you start, call C<begin> and for each subrequest you finish,
		739	call C<end>.
467		740
468	=back	741	=back
469		742
470	=head3 METHODS FOR CONSUMERS	743	=head3 METHODS FOR CONSUMERS
471		744
…		…
487	function will call C<croak>.	760	function will call C<croak>.
488		761
489	In list context, all parameters passed to C<send> will be returned,	762	In list context, all parameters passed to C<send> will be returned,
490	in scalar context only the first one will be returned.	763	in scalar context only the first one will be returned.
491		764
		765	Note that doing a blocking wait in a callback is not supported by any
		766	event loop, that is, recursive invocation of a blocking C<< ->recv
		767	>> is not allowed, and the C<recv> call will C<croak> if such a
		768	condition is detected. This condition can be slightly loosened by using
		769	L<Coro::AnyEvent>, which allows you to do a blocking C<< ->recv >> from
		770	any thread that doesn't run the event loop itself.
		771
492	Not all event models support a blocking wait - some die in that case	772	Not all event models support a blocking wait - some die in that case
493	(programs might want to do that to stay interactive), so I<if you are	773	(programs might want to do that to stay interactive), so I<if you are
494	using this from a module, never require a blocking wait>, but let the	774	using this from a module, never require a blocking wait>. Instead, let the
495	caller decide whether the call will block or not (for example, by coupling	775	caller decide whether the call will block or not (for example, by coupling
496	condition variables with some kind of request results and supporting	776	condition variables with some kind of request results and supporting
497	callbacks so the caller knows that getting the result will not block,	777	callbacks so the caller knows that getting the result will not block,
498	while still supporting blocking waits if the caller so desires).	778	while still supporting blocking waits if the caller so desires).
499		779
500	Another reason I<never> to C<< ->recv >> in a module is that you cannot
501	sensibly have two C<< ->recv >>'s in parallel, as that would require
502	multiple interpreters or coroutines/threads, none of which C<AnyEvent>
503	can supply.
504
505	The L<Coro> module, however, I<can> and I<does> supply coroutines and, in
506	fact, L<Coro::AnyEvent> replaces AnyEvent's condvars by coroutine-safe
507	versions and also integrates coroutines into AnyEvent, making blocking
508	C<< ->recv >> calls perfectly safe as long as they are done from another
509	coroutine (one that doesn't run the event loop).
510
511	You can ensure that C<< -recv >> never blocks by setting a callback and	780	You can ensure that C<< -recv >> never blocks by setting a callback and
512	only calling C<< ->recv >> from within that callback (or at a later	781	only calling C<< ->recv >> from within that callback (or at a later
513	time). This will work even when the event loop does not support blocking	782	time). This will work even when the event loop does not support blocking
514	waits otherwise.	783	waits otherwise.
515		784
516	=item $bool = $cv->ready	785	=item $bool = $cv->ready
517		786
518	Returns true when the condition is "true", i.e. whether C<send> or	787	Returns true when the condition is "true", i.e. whether C<send> or
519	C<croak> have been called.	788	C<croak> have been called.
520		789
521	=item $cb = $cv->cb ([new callback])	790	=item $cb = $cv->cb ($cb->($cv))
522		791
523	This is a mutator function that returns the callback set and optionally	792	This is a mutator function that returns the callback set and optionally
524	replaces it before doing so.	793	replaces it before doing so.
525		794
526	The callback will be called when the condition becomes "true", i.e. when	795	The callback will be called when the condition becomes (or already was)
527	C<send> or C<croak> are called. Calling C<recv> inside the callback	796	"true", i.e. when C<send> or C<croak> are called (or were called), with
		797	the only argument being the condition variable itself. Calling C<recv>
528	or at any later time is guaranteed not to block.	798	inside the callback or at any later time is guaranteed not to block.
529		799
530	=back	800	=back
531		801
		802	=head1 SUPPORTED EVENT LOOPS/BACKENDS
		803
		804	The available backend classes are (every class has its own manpage):
		805
		806	=over 4
		807
		808	=item Backends that are autoprobed when no other event loop can be found.
		809
		810	EV is the preferred backend when no other event loop seems to be in
		811	use. If EV is not installed, then AnyEvent will try Event, and, failing
		812	that, will fall back to its own pure-perl implementation, which is
		813	available everywhere as it comes with AnyEvent itself.
		814
		815	AnyEvent::Impl::EV based on EV (interface to libev, best choice).
		816	AnyEvent::Impl::Event based on Event, very stable, few glitches.
		817	AnyEvent::Impl::Perl pure-perl implementation, fast and portable.
		818
		819	=item Backends that are transparently being picked up when they are used.
		820
		821	These will be used when they are currently loaded when the first watcher
		822	is created, in which case it is assumed that the application is using
		823	them. This means that AnyEvent will automatically pick the right backend
		824	when the main program loads an event module before anything starts to
		825	create watchers. Nothing special needs to be done by the main program.
		826
		827	AnyEvent::Impl::Glib based on Glib, slow but very stable.
		828	AnyEvent::Impl::Tk based on Tk, very broken.
		829	AnyEvent::Impl::EventLib based on Event::Lib, leaks memory and worse.
		830	AnyEvent::Impl::POE based on POE, very slow, some limitations.
		831	AnyEvent::Impl::Irssi used when running within irssi.
		832
		833	=item Backends with special needs.
		834
		835	Qt requires the Qt::Application to be instantiated first, but will
		836	otherwise be picked up automatically. As long as the main program
		837	instantiates the application before any AnyEvent watchers are created,
		838	everything should just work.
		839
		840	AnyEvent::Impl::Qt based on Qt.
		841
		842	Support for IO::Async can only be partial, as it is too broken and
		843	architecturally limited to even support the AnyEvent API. It also
		844	is the only event loop that needs the loop to be set explicitly, so
		845	it can only be used by a main program knowing about AnyEvent. See
		846	L<AnyEvent::Impl::Async> for the gory details.
		847
		848	AnyEvent::Impl::IOAsync based on IO::Async, cannot be autoprobed.
		849
		850	=item Event loops that are indirectly supported via other backends.
		851
		852	Some event loops can be supported via other modules:
		853
		854	There is no direct support for WxWidgets (L<Wx>) or L<Prima>.
		855
		856	B<WxWidgets> has no support for watching file handles. However, you can
		857	use WxWidgets through the POE adaptor, as POE has a Wx backend that simply
		858	polls 20 times per second, which was considered to be too horrible to even
		859	consider for AnyEvent.
		860
		861	B<Prima> is not supported as nobody seems to be using it, but it has a POE
		862	backend, so it can be supported through POE.
		863
		864	AnyEvent knows about both L<Prima> and L<Wx>, however, and will try to
		865	load L<POE> when detecting them, in the hope that POE will pick them up,
		866	in which case everything will be automatic.
		867
		868	=back
		869
532	=head1 GLOBAL VARIABLES AND FUNCTIONS	870	=head1 GLOBAL VARIABLES AND FUNCTIONS
533		871
		872	These are not normally required to use AnyEvent, but can be useful to
		873	write AnyEvent extension modules.
		874
534	=over 4	875	=over 4
535		876
536	=item $AnyEvent::MODEL	877	=item $AnyEvent::MODEL
537		878
538	Contains C<undef> until the first watcher is being created. Then it	879	Contains C<undef> until the first watcher is being created, before the
		880	backend has been autodetected.
		881
539	contains the event model that is being used, which is the name of the	882	Afterwards it contains the event model that is being used, which is the
540	Perl class implementing the model. This class is usually one of the	883	name of the Perl class implementing the model. This class is usually one
541	C<AnyEvent::Impl:xxx> modules, but can be any other class in the case	884	of the C<AnyEvent::Impl:xxx> modules, but can be any other class in the
542	AnyEvent has been extended at runtime (e.g. in I<rxvt-unicode>).	885	case AnyEvent has been extended at runtime (e.g. in I<rxvt-unicode> it
543		886	will be C<urxvt::anyevent>).
544	The known classes so far are:
545
546	AnyEvent::Impl::EV based on EV (an interface to libev, best choice).
547	AnyEvent::Impl::Event based on Event, second best choice.
548	AnyEvent::Impl::Perl pure-perl implementation, fast and portable.
549	AnyEvent::Impl::Glib based on Glib, third-best choice.
550	AnyEvent::Impl::Tk based on Tk, very bad choice.
551	AnyEvent::Impl::Qt based on Qt, cannot be autoprobed (see its docs).
552	AnyEvent::Impl::EventLib based on Event::Lib, leaks memory and worse.
553	AnyEvent::Impl::POE based on POE, not generic enough for full support.
554
555	There is no support for WxWidgets, as WxWidgets has no support for
556	watching file handles. However, you can use WxWidgets through the
557	POE Adaptor, as POE has a Wx backend that simply polls 20 times per
558	second, which was considered to be too horrible to even consider for
559	AnyEvent. Likewise, other POE backends can be used by AnyEvent by using
560	it's adaptor.
561
562	AnyEvent knows about L<Prima> and L<Wx> and will try to use L<POE> when
563	autodetecting them.
564		887
565	=item AnyEvent::detect	888	=item AnyEvent::detect
566		889
567	Returns C<$AnyEvent::MODEL>, forcing autodetection of the event model	890	Returns C<$AnyEvent::MODEL>, forcing autodetection of the event model
568	if necessary. You should only call this function right before you would	891	if necessary. You should only call this function right before you would
569	have created an AnyEvent watcher anyway, that is, as late as possible at	892	have created an AnyEvent watcher anyway, that is, as late as possible at
570	runtime.	893	runtime, and not e.g. while initialising of your module.
		894
		895	If you need to do some initialisation before AnyEvent watchers are
		896	created, use C<post_detect>.
571		897
572	=item $guard = AnyEvent::post_detect { BLOCK }	898	=item $guard = AnyEvent::post_detect { BLOCK }
573		899
574	Arranges for the code block to be executed as soon as the event model is	900	Arranges for the code block to be executed as soon as the event model is
575	autodetected (or immediately if this has already happened).	901	autodetected (or immediately if this has already happened).
576		902
		903	The block will be executed I<after> the actual backend has been detected
		904	(C<$AnyEvent::MODEL> is set), but I<before> any watchers have been
		905	created, so it is possible to e.g. patch C<@AnyEvent::ISA> or do
		906	other initialisations - see the sources of L<AnyEvent::Strict> or
		907	L<AnyEvent::AIO> to see how this is used.
		908
		909	The most common usage is to create some global watchers, without forcing
		910	event module detection too early, for example, L<AnyEvent::AIO> creates
		911	and installs the global L<IO::AIO> watcher in a C<post_detect> block to
		912	avoid autodetecting the event module at load time.
		913
577	If called in scalar or list context, then it creates and returns an object	914	If called in scalar or list context, then it creates and returns an object
578	that automatically removes the callback again when it is destroyed. See	915	that automatically removes the callback again when it is destroyed (or
		916	C<undef> when the hook was immediately executed). See L<AnyEvent::AIO> for
579	L<Coro::BDB> for a case where this is useful.	917	a case where this is useful.
		918
		919	Example: Create a watcher for the IO::AIO module and store it in
		920	C<$WATCHER>. Only do so after the event loop is initialised, though.
		921
		922	our WATCHER;
		923
		924	my $guard = AnyEvent::post_detect {
		925	$WATCHER = AnyEvent->io (fh => IO::AIO::poll_fileno, poll => 'r', cb => \&IO::AIO::poll_cb);
		926	};
		927
		928	# the ||= is important in case post_detect immediately runs the block,
		929	# as to not clobber the newly-created watcher. assigning both watcher and
		930	# post_detect guard to the same variable has the advantage of users being
		931	# able to just C<undef $WATCHER> if the watcher causes them grief.
		932
		933	$WATCHER ||= $guard;
580		934
581	=item @AnyEvent::post_detect	935	=item @AnyEvent::post_detect
582		936
583	If there are any code references in this array (you can C<push> to it	937	If there are any code references in this array (you can C<push> to it
584	before or after loading AnyEvent), then they will called directly after	938	before or after loading AnyEvent), then they will called directly after
585	the event loop has been chosen.	939	the event loop has been chosen.
586		940
587	You should check C<$AnyEvent::MODEL> before adding to this array, though:	941	You should check C<$AnyEvent::MODEL> before adding to this array, though:
588	if it contains a true value then the event loop has already been detected,	942	if it is defined then the event loop has already been detected, and the
589	and the array will be ignored.	943	array will be ignored.
590		944
591	Best use C<AnyEvent::post_detect { BLOCK }> instead.	945	Best use C<AnyEvent::post_detect { BLOCK }> when your application allows
		946	it,as it takes care of these details.
		947
		948	This variable is mainly useful for modules that can do something useful
		949	when AnyEvent is used and thus want to know when it is initialised, but do
		950	not need to even load it by default. This array provides the means to hook
		951	into AnyEvent passively, without loading it.
592		952
593	=back	953	=back
594		954
595	=head1 WHAT TO DO IN A MODULE	955	=head1 WHAT TO DO IN A MODULE
596		956
…		…
651		1011
652		1012
653	=head1 OTHER MODULES	1013	=head1 OTHER MODULES
654		1014
655	The following is a non-exhaustive list of additional modules that use	1015	The following is a non-exhaustive list of additional modules that use
656	AnyEvent and can therefore be mixed easily with other AnyEvent modules	1016	AnyEvent as a client and can therefore be mixed easily with other AnyEvent
657	in the same program. Some of the modules come with AnyEvent, some are	1017	modules and other event loops in the same program. Some of the modules
658	available via CPAN.	1018	come with AnyEvent, most are available via CPAN.
659		1019
660	=over 4	1020	=over 4
661		1021
662	=item L<AnyEvent::Util>	1022	=item L<AnyEvent::Util>
663		1023
664	Contains various utility functions that replace often-used but blocking	1024	Contains various utility functions that replace often-used but blocking
665	functions such as C<inet_aton> by event-/callback-based versions.	1025	functions such as C<inet_aton> by event-/callback-based versions.
666
667	=item L<AnyEvent::Handle>
668
669	Provide read and write buffers and manages watchers for reads and writes.
670		1026
671	=item L<AnyEvent::Socket>	1027	=item L<AnyEvent::Socket>
672		1028
673	Provides various utility functions for (internet protocol) sockets,	1029	Provides various utility functions for (internet protocol) sockets,
674	addresses and name resolution. Also functions to create non-blocking tcp	1030	addresses and name resolution. Also functions to create non-blocking tcp
675	connections or tcp servers, with IPv6 and SRV record support and more.	1031	connections or tcp servers, with IPv6 and SRV record support and more.
676		1032
		1033	=item L<AnyEvent::Handle>
		1034
		1035	Provide read and write buffers, manages watchers for reads and writes,
		1036	supports raw and formatted I/O, I/O queued and fully transparent and
		1037	non-blocking SSL/TLS (via L<AnyEvent::TLS>.
		1038
677	=item L<AnyEvent::DNS>	1039	=item L<AnyEvent::DNS>
678		1040
679	Provides rich asynchronous DNS resolver capabilities.	1041	Provides rich asynchronous DNS resolver capabilities.
680		1042
		1043	=item L<AnyEvent::HTTP>
		1044
		1045	A simple-to-use HTTP library that is capable of making a lot of concurrent
		1046	HTTP requests.
		1047
681	=item L<AnyEvent::HTTPD>	1048	=item L<AnyEvent::HTTPD>
682		1049
683	Provides a simple web application server framework.	1050	Provides a simple web application server framework.
684		1051
685	=item L<AnyEvent::FastPing>	1052	=item L<AnyEvent::FastPing>
686		1053
687	The fastest ping in the west.	1054	The fastest ping in the west.
688		1055
		1056	=item L<AnyEvent::DBI>
		1057
		1058	Executes L<DBI> requests asynchronously in a proxy process.
		1059
		1060	=item L<AnyEvent::AIO>
		1061
		1062	Truly asynchronous I/O, should be in the toolbox of every event
		1063	programmer. AnyEvent::AIO transparently fuses L<IO::AIO> and AnyEvent
		1064	together.
		1065
		1066	=item L<AnyEvent::BDB>
		1067
		1068	Truly asynchronous Berkeley DB access. AnyEvent::BDB transparently fuses
		1069	L<BDB> and AnyEvent together.
		1070
		1071	=item L<AnyEvent::GPSD>
		1072
		1073	A non-blocking interface to gpsd, a daemon delivering GPS information.
		1074
689	=item L<Net::IRC3>	1075	=item L<AnyEvent::IRC>
690		1076
691	AnyEvent based IRC client module family.	1077	AnyEvent based IRC client module family (replacing the older Net::IRC3).
692		1078
693	=item L<Net::XMPP2>	1079	=item L<AnyEvent::XMPP>
694		1080
695	AnyEvent based XMPP (Jabber protocol) module family.	1081	AnyEvent based XMPP (Jabber protocol) module family (replacing the older
		1082	Net::XMPP2>.
		1083
		1084	=item L<AnyEvent::IGS>
		1085
		1086	A non-blocking interface to the Internet Go Server protocol (used by
		1087	L<App::IGS>).
696		1088
697	=item L<Net::FCP>	1089	=item L<Net::FCP>
698		1090
699	AnyEvent-based implementation of the Freenet Client Protocol, birthplace	1091	AnyEvent-based implementation of the Freenet Client Protocol, birthplace
700	of AnyEvent.	1092	of AnyEvent.
…		…
705		1097
706	=item L<Coro>	1098	=item L<Coro>
707		1099
708	Has special support for AnyEvent via L<Coro::AnyEvent>.	1100	Has special support for AnyEvent via L<Coro::AnyEvent>.
709		1101
710	=item L<AnyEvent::AIO>, L<IO::AIO>
711
712	Truly asynchronous I/O, should be in the toolbox of every event
713	programmer. AnyEvent::AIO transparently fuses IO::AIO and AnyEvent
714	together.
715
716	=item L<AnyEvent::BDB>, L<BDB>
717
718	Truly asynchronous Berkeley DB access. AnyEvent::AIO transparently fuses
719	IO::AIO and AnyEvent together.
720
721	=item L<IO::Lambda>
722
723	The lambda approach to I/O - don't ask, look there. Can use AnyEvent.
724
725	=back	1102	=back
726		1103
727	=cut	1104	=cut
728		1105
729	package AnyEvent;	1106	package AnyEvent;
730		1107
		1108	# basically a tuned-down version of common::sense
		1109	sub common_sense {
731	no warnings;	1110	# no warnings
732	use strict;	1111	${^WARNING_BITS} ^= ${^WARNING_BITS};
		1112	# use strict vars subs
		1113	$^H |= 0x00000600;
		1114	}
733		1115
		1116	BEGIN { AnyEvent::common_sense }
		1117
734	use Carp;	1118	use Carp ();
735		1119
736	our $VERSION = '4.03';	1120	our $VERSION = 4.9;
737	our $MODEL;	1121	our $MODEL;
738		1122
739	our $AUTOLOAD;	1123	our $AUTOLOAD;
740	our @ISA;	1124	our @ISA;
741		1125
742	our @REGISTRY;	1126	our @REGISTRY;
743		1127
		1128	our $WIN32;
		1129
		1130	our $VERBOSE;
		1131
		1132	BEGIN {
		1133	eval "sub WIN32(){ " . (($^O =~ /mswin32/i)*1) ." }";
		1134	eval "sub TAINT(){ " . (${^TAINT}*1) . " }";
		1135
		1136	delete @ENV{grep /^PERL_ANYEVENT_/, keys %ENV}
		1137	if ${^TAINT};
		1138
744	our $verbose = $ENV{PERL_ANYEVENT_VERBOSE}*1;	1139	$VERBOSE = $ENV{PERL_ANYEVENT_VERBOSE}*1;
		1140
		1141	}
		1142
		1143	our $MAX_SIGNAL_LATENCY = 10;
745		1144
746	our %PROTOCOL; # (ipv4|ipv6) => (1|2), higher numbers are preferred	1145	our %PROTOCOL; # (ipv4|ipv6) => (1|2), higher numbers are preferred
747		1146
748	{	1147	{
749	my $idx;	1148	my $idx;
…		…
751	for reverse split /\s*,\s*/,	1150	for reverse split /\s*,\s*/,
752	$ENV{PERL_ANYEVENT_PROTOCOLS} || "ipv4,ipv6";	1151	$ENV{PERL_ANYEVENT_PROTOCOLS} || "ipv4,ipv6";
753	}	1152	}
754		1153
755	my @models = (	1154	my @models = (
756	[EV:: => AnyEvent::Impl::EV::],	1155	[EV:: => AnyEvent::Impl::EV:: , 1],
757	[Event:: => AnyEvent::Impl::Event::],	1156	[Event:: => AnyEvent::Impl::Event::, 1],
758	[AnyEvent::Impl::Perl:: => AnyEvent::Impl::Perl::],	1157	[AnyEvent::Impl::Perl:: => AnyEvent::Impl::Perl:: , 1],
759	# everything below here will not be autoprobed	1158	# everything below here will not (normally) be autoprobed
760	# as the pureperl backend should work everywhere	1159	# as the pureperl backend should work everywhere
761	# and is usually faster	1160	# and is usually faster
		1161	[Glib:: => AnyEvent::Impl::Glib:: , 1], # becomes extremely slow with many watchers
		1162	[Event::Lib:: => AnyEvent::Impl::EventLib::], # too buggy
		1163	[Irssi:: => AnyEvent::Impl::Irssi::], # Irssi has a bogus "Event" package
762	[Tk:: => AnyEvent::Impl::Tk::], # crashes with many handles	1164	[Tk:: => AnyEvent::Impl::Tk::], # crashes with many handles
763	[Glib:: => AnyEvent::Impl::Glib::], # becomes extremely slow with many watchers
764	[Event::Lib:: => AnyEvent::Impl::EventLib::], # too buggy
765	[Qt:: => AnyEvent::Impl::Qt::], # requires special main program	1165	[Qt:: => AnyEvent::Impl::Qt::], # requires special main program
766	[POE::Kernel:: => AnyEvent::Impl::POE::], # lasciate ogni speranza	1166	[POE::Kernel:: => AnyEvent::Impl::POE::], # lasciate ogni speranza
767	[Wx:: => AnyEvent::Impl::POE::],	1167	[Wx:: => AnyEvent::Impl::POE::],
768	[Prima:: => AnyEvent::Impl::POE::],	1168	[Prima:: => AnyEvent::Impl::POE::],
		1169	# IO::Async is just too broken - we would need workarounds for its
		1170	# byzantine signal and broken child handling, among others.
		1171	# IO::Async is rather hard to detect, as it doesn't have any
		1172	# obvious default class.
		1173	# [0, IO::Async:: => AnyEvent::Impl::IOAsync::], # requires special main program
		1174	# [0, IO::Async::Loop:: => AnyEvent::Impl::IOAsync::], # requires special main program
		1175	# [0, IO::Async::Notifier:: => AnyEvent::Impl::IOAsync::], # requires special main program
769	);	1176	);
770		1177
771	our %method = map +($_ => 1), qw(io timer signal child condvar one_event DESTROY);	1178	our %method = map +($_ => 1),
		1179	qw(io timer time now now_update signal child idle condvar one_event DESTROY);
772		1180
773	our @post_detect;	1181	our @post_detect;
774		1182
775	sub post_detect(&) {	1183	sub post_detect(&) {
776	my ($cb) = @_;	1184	my ($cb) = @_;
777		1185
778	if ($MODEL) {	1186	if ($MODEL) {
779	$cb->();	1187	$cb->();
780		1188
781	1	1189	undef
782	} else {	1190	} else {
783	push @post_detect, $cb;	1191	push @post_detect, $cb;
784		1192
785	defined wantarray	1193	defined wantarray
786	? bless \$cb, "AnyEvent::Util::PostDetect"	1194	? bless \$cb, "AnyEvent::Util::postdetect"
787	: ()	1195	: ()
788	}	1196	}
789	}	1197	}
790		1198
791	sub AnyEvent::Util::PostDetect::DESTROY {	1199	sub AnyEvent::Util::postdetect::DESTROY {
792	@post_detect = grep $_ != ${$_[0]}, @post_detect;	1200	@post_detect = grep $_ != ${$_[0]}, @post_detect;
793	}	1201	}
794		1202
795	sub detect() {	1203	sub detect() {
796	unless ($MODEL) {	1204	unless ($MODEL) {
797	no strict 'refs';
798	local $SIG{__DIE__};	1205	local $SIG{__DIE__};
799		1206
800	if ($ENV{PERL_ANYEVENT_MODEL} =~ /^([a-zA-Z]+)$/) {	1207	if ($ENV{PERL_ANYEVENT_MODEL} =~ /^([a-zA-Z]+)$/) {
801	my $model = "AnyEvent::Impl::$1";	1208	my $model = "AnyEvent::Impl::$1";
802	if (eval "require $model") {	1209	if (eval "require $model") {
803	$MODEL = $model;	1210	$MODEL = $model;
804	warn "AnyEvent: loaded model '$model' (forced by \$PERL_ANYEVENT_MODEL), using it.\n" if $verbose > 1;	1211	warn "AnyEvent: loaded model '$model' (forced by \$ENV{PERL_ANYEVENT_MODEL}), using it.\n" if $VERBOSE >= 2;
805	} else {	1212	} else {
806	warn "AnyEvent: unable to load model '$model' (from \$PERL_ANYEVENT_MODEL):\n$@" if $verbose;	1213	warn "AnyEvent: unable to load model '$model' (from \$ENV{PERL_ANYEVENT_MODEL}):\n$@" if $VERBOSE;
807	}	1214	}
808	}	1215	}
809		1216
810	# check for already loaded models	1217	# check for already loaded models
811	unless ($MODEL) {	1218	unless ($MODEL) {
812	for (@REGISTRY, @models) {	1219	for (@REGISTRY, @models) {
813	my ($package, $model) = @$_;	1220	my ($package, $model) = @$_;
814	if (${"$package\::VERSION"} > 0) {	1221	if (${"$package\::VERSION"} > 0) {
815	if (eval "require $model") {	1222	if (eval "require $model") {
816	$MODEL = $model;	1223	$MODEL = $model;
817	warn "AnyEvent: autodetected model '$model', using it.\n" if $verbose > 1;	1224	warn "AnyEvent: autodetected model '$model', using it.\n" if $VERBOSE >= 2;
818	last;	1225	last;
819	}	1226	}
820	}	1227	}
821	}	1228	}
822		1229
823	unless ($MODEL) {	1230	unless ($MODEL) {
824	# try to load a model	1231	# try to autoload a model
825
826	for (@REGISTRY, @models) {	1232	for (@REGISTRY, @models) {
827	my ($package, $model) = @$_;	1233	my ($package, $model, $autoload) = @$_;
		1234	if (
		1235	$autoload
828	if (eval "require $package"	1236	and eval "require $package"
829	and ${"$package\::VERSION"} > 0	1237	and ${"$package\::VERSION"} > 0
830	and eval "require $model") {	1238	and eval "require $model"
		1239	) {
831	$MODEL = $model;	1240	$MODEL = $model;
832	warn "AnyEvent: autoprobed model '$model', using it.\n" if $verbose > 1;	1241	warn "AnyEvent: autoloaded model '$model', using it.\n" if $VERBOSE >= 2;
833	last;	1242	last;
834	}	1243	}
835	}	1244	}
836		1245
837	$MODEL	1246	$MODEL
838	or die "No event module selected for AnyEvent and autodetect failed. Install any one of these modules: EV, Event or Glib.";	1247	or die "No event module selected for AnyEvent and autodetect failed. Install any one of these modules: EV, Event or Glib.\n";
839	}	1248	}
840	}	1249	}
841		1250
		1251	push @{"$MODEL\::ISA"}, "AnyEvent::Base";
		1252
842	unshift @ISA, $MODEL;	1253	unshift @ISA, $MODEL;
843	push @{"$MODEL\::ISA"}, "AnyEvent::Base";	1254
		1255	require AnyEvent::Strict if $ENV{PERL_ANYEVENT_STRICT};
844		1256
845	(shift @post_detect)->() while @post_detect;	1257	(shift @post_detect)->() while @post_detect;
846	}	1258	}
847		1259
848	$MODEL	1260	$MODEL
…		…
850		1262
851	sub AUTOLOAD {	1263	sub AUTOLOAD {
852	(my $func = $AUTOLOAD) =~ s/.*://;	1264	(my $func = $AUTOLOAD) =~ s/.*://;
853		1265
854	$method{$func}	1266	$method{$func}
855	or croak "$func: not a valid method for AnyEvent objects";	1267	or Carp::croak "$func: not a valid method for AnyEvent objects";
856		1268
857	detect unless $MODEL;	1269	detect unless $MODEL;
858		1270
859	my $class = shift;	1271	my $class = shift;
860	$class->$func (@_);	1272	$class->$func (@_);
861	}	1273	}
862		1274
		1275	# utility function to dup a filehandle. this is used by many backends
		1276	# to support binding more than one watcher per filehandle (they usually
		1277	# allow only one watcher per fd, so we dup it to get a different one).
		1278	sub _dupfh($$;$$) {
		1279	my ($poll, $fh, $r, $w) = @_;
		1280
		1281	# cygwin requires the fh mode to be matching, unix doesn't
		1282	my ($rw, $mode) = $poll eq "r" ? ($r, "<&") : ($w, ">&");
		1283
		1284	open my $fh2, $mode, $fh
		1285	or die "AnyEvent->io: cannot dup() filehandle in mode '$poll': $!,";
		1286
		1287	# we assume CLOEXEC is already set by perl in all important cases
		1288
		1289	($fh2, $rw)
		1290	}
		1291
863	package AnyEvent::Base;	1292	package AnyEvent::Base;
864		1293
		1294	# default implementations for many methods
		1295
		1296	sub _time {
		1297	# probe for availability of Time::HiRes
		1298	if (eval "use Time::HiRes (); Time::HiRes::time (); 1") {
		1299	warn "AnyEvent: using Time::HiRes for sub-second timing accuracy.\n" if $VERBOSE >= 8;
		1300	*_time = \&Time::HiRes::time;
		1301	# if (eval "use POSIX (); (POSIX::times())...
		1302	} else {
		1303	warn "AnyEvent: using built-in time(), WARNING, no sub-second resolution!\n" if $VERBOSE;
		1304	*_time = sub { time }; # epic fail
		1305	}
		1306
		1307	&_time
		1308	}
		1309
		1310	sub time { _time }
		1311	sub now { _time }
		1312	sub now_update { }
		1313
865	# default implementation for ->condvar	1314	# default implementation for ->condvar
866		1315
867	sub condvar {	1316	sub condvar {
868	bless { @_ == 3 ? (_ae_cb => $_[2]) : () }, AnyEvent::CondVar::	1317	bless { @_ == 3 ? (_ae_cb => $_[2]) : () }, "AnyEvent::CondVar"
869	}	1318	}
870		1319
871	# default implementation for ->signal	1320	# default implementation for ->signal
872		1321
873	our %SIG_CB;	1322	our $HAVE_ASYNC_INTERRUPT;
		1323
		1324	sub _have_async_interrupt() {
		1325	$HAVE_ASYNC_INTERRUPT = 1*(!$ENV{PERL_ANYEVENT_AVOID_ASYNC_INTERRUPT}
		1326	&& eval "use Async::Interrupt 1.0 (); 1")
		1327	unless defined $HAVE_ASYNC_INTERRUPT;
		1328
		1329	$HAVE_ASYNC_INTERRUPT
		1330	}
		1331
		1332	our ($SIGPIPE_R, $SIGPIPE_W, %SIG_CB, %SIG_EV, $SIG_IO);
		1333	our (%SIG_ASY, %SIG_ASY_W);
		1334	our ($SIG_COUNT, $SIG_TW);
		1335
		1336	sub _signal_exec {
		1337	$HAVE_ASYNC_INTERRUPT
		1338	? $SIGPIPE_R->drain
		1339	: sysread $SIGPIPE_R, my $dummy, 9;
		1340
		1341	while (%SIG_EV) {
		1342	for (keys %SIG_EV) {
		1343	delete $SIG_EV{$_};
		1344	$_->() for values %{ $SIG_CB{$_} || {} };
		1345	}
		1346	}
		1347	}
		1348
		1349	# install a dummy wakeup watcher to reduce signal catching latency
		1350	sub _sig_add() {
		1351	unless ($SIG_COUNT++) {
		1352	# try to align timer on a full-second boundary, if possible
		1353	my $NOW = AnyEvent->now;
		1354
		1355	$SIG_TW = AnyEvent->timer (
		1356	after => $MAX_SIGNAL_LATENCY - ($NOW - int $NOW),
		1357	interval => $MAX_SIGNAL_LATENCY,
		1358	cb => sub { }, # just for the PERL_ASYNC_CHECK
		1359	);
		1360	}
		1361	}
		1362
		1363	sub _sig_del {
		1364	undef $SIG_TW
		1365	unless --$SIG_COUNT;
		1366	}
		1367
		1368	our $_sig_name_init; $_sig_name_init = sub {
		1369	eval q{ # poor man's autoloading
		1370	undef $_sig_name_init;
		1371
		1372	if (_have_async_interrupt) {
		1373	*sig2num = \&Async::Interrupt::sig2num;
		1374	*sig2name = \&Async::Interrupt::sig2name;
		1375	} else {
		1376	require Config;
		1377
		1378	my %signame2num;
		1379	@signame2num{ split ' ', $Config::Config{sig_name} }
		1380	= split ' ', $Config::Config{sig_num};
		1381
		1382	my @signum2name;
		1383	@signum2name[values %signame2num] = keys %signame2num;
		1384
		1385	*sig2num = sub($) {
		1386	$_[0] > 0 ? shift : $signame2num{+shift}
		1387	};
		1388	*sig2name = sub ($) {
		1389	$_[0] > 0 ? $signum2name[+shift] : shift
		1390	};
		1391	}
		1392	};
		1393	die if $@;
		1394	};
		1395
		1396	sub sig2num ($) { &$_sig_name_init; &sig2num }
		1397	sub sig2name($) { &$_sig_name_init; &sig2name }
874		1398
875	sub signal {	1399	sub signal {
		1400	eval q{ # poor man's autoloading {}
		1401	# probe for availability of Async::Interrupt
		1402	if (_have_async_interrupt) {
		1403	warn "AnyEvent: using Async::Interrupt for race-free signal handling.\n" if $VERBOSE >= 8;
		1404
		1405	$SIGPIPE_R = new Async::Interrupt::EventPipe;
		1406	$SIG_IO = AnyEvent->io (fh => $SIGPIPE_R->fileno, poll => "r", cb => \&_signal_exec);
		1407
		1408	} else {
		1409	warn "AnyEvent: using emulated perl signal handling with latency timer.\n" if $VERBOSE >= 8;
		1410
		1411	require Fcntl;
		1412
		1413	if (AnyEvent::WIN32) {
		1414	require AnyEvent::Util;
		1415
		1416	($SIGPIPE_R, $SIGPIPE_W) = AnyEvent::Util::portable_pipe ();
		1417	AnyEvent::Util::fh_nonblocking ($SIGPIPE_R, 1) if $SIGPIPE_R;
		1418	AnyEvent::Util::fh_nonblocking ($SIGPIPE_W, 1) if $SIGPIPE_W; # just in case
		1419	} else {
		1420	pipe $SIGPIPE_R, $SIGPIPE_W;
		1421	fcntl $SIGPIPE_R, &Fcntl::F_SETFL, &Fcntl::O_NONBLOCK if $SIGPIPE_R;
		1422	fcntl $SIGPIPE_W, &Fcntl::F_SETFL, &Fcntl::O_NONBLOCK if $SIGPIPE_W; # just in case
		1423
		1424	# not strictly required, as $^F is normally 2, but let's make sure...
		1425	fcntl $SIGPIPE_R, &Fcntl::F_SETFD, &Fcntl::FD_CLOEXEC;
		1426	fcntl $SIGPIPE_W, &Fcntl::F_SETFD, &Fcntl::FD_CLOEXEC;
		1427	}
		1428
		1429	$SIGPIPE_R
		1430	or Carp::croak "AnyEvent: unable to create a signal reporting pipe: $!\n";
		1431
		1432	$SIG_IO = AnyEvent->io (fh => $SIGPIPE_R, poll => "r", cb => \&_signal_exec);
		1433	}
		1434
		1435	*signal = sub {
876	my (undef, %arg) = @_;	1436	my (undef, %arg) = @_;
877		1437
878	my $signal = uc $arg{signal}	1438	my $signal = uc $arg{signal}
879	or Carp::croak "required option 'signal' is missing";	1439	or Carp::croak "required option 'signal' is missing";
880		1440
		1441	if ($HAVE_ASYNC_INTERRUPT) {
		1442	# async::interrupt
		1443
		1444	$signal = sig2num $signal;
881	$SIG_CB{$signal}{$arg{cb}} = $arg{cb};	1445	$SIG_CB{$signal}{$arg{cb}} = $arg{cb};
		1446
		1447	$SIG_ASY{$signal} ||= new Async::Interrupt
		1448	cb => sub { undef $SIG_EV{$signal} },
		1449	signal => $signal,
		1450	pipe => [$SIGPIPE_R->filenos],
		1451	pipe_autodrain => 0,
		1452	;
		1453
		1454	} else {
		1455	# pure perl
		1456
		1457	# AE::Util has been loaded in signal
		1458	$signal = sig2name $signal;
		1459	$SIG_CB{$signal}{$arg{cb}} = $arg{cb};
		1460
882	$SIG{$signal} ||= sub {	1461	$SIG{$signal} ||= sub {
883	$_->() for values %{ $SIG_CB{$signal} || {} };	1462	local $!;
		1463	syswrite $SIGPIPE_W, "\x00", 1 unless %SIG_EV;
		1464	undef $SIG_EV{$signal};
		1465	};
		1466
		1467	# can't do signal processing without introducing races in pure perl,
		1468	# so limit the signal latency.
		1469	_sig_add;
		1470	}
		1471
		1472	bless [$signal, $arg{cb}], "AnyEvent::Base::signal"
		1473	};
		1474
		1475	*AnyEvent::Base::signal::DESTROY = sub {
		1476	my ($signal, $cb) = @{$_[0]};
		1477
		1478	_sig_del;
		1479
		1480	delete $SIG_CB{$signal}{$cb};
		1481
		1482	$HAVE_ASYNC_INTERRUPT
		1483	? delete $SIG_ASY{$signal}
		1484	: # delete doesn't work with older perls - they then
		1485	# print weird messages, or just unconditionally exit
		1486	# instead of getting the default action.
		1487	undef $SIG{$signal}
		1488	unless keys %{ $SIG_CB{$signal} };
		1489	};
884	};	1490	};
885		1491	die if $@;
886	bless [$signal, $arg{cb}], "AnyEvent::Base::Signal"	1492	&signal
887	}
888
889	sub AnyEvent::Base::Signal::DESTROY {
890	my ($signal, $cb) = @{$_[0]};
891
892	delete $SIG_CB{$signal}{$cb};
893
894	$SIG{$signal} = 'DEFAULT' unless keys %{ $SIG_CB{$signal} };
895	}	1493	}
896		1494
897	# default implementation for ->child	1495	# default implementation for ->child
898		1496
899	our %PID_CB;	1497	our %PID_CB;
900	our $CHLD_W;	1498	our $CHLD_W;
901	our $CHLD_DELAY_W;	1499	our $CHLD_DELAY_W;
902	our $PID_IDLE;
903	our $WNOHANG;	1500	our $WNOHANG;
904		1501
905	sub _child_wait {	1502	sub _emit_childstatus($$) {
906	while (0 < (my $pid = waitpid -1, $WNOHANG)) {	1503	my (undef, $rpid, $rstatus) = @_;
		1504
		1505	$_->($rpid, $rstatus)
907	$_->($pid, $?) for (values %{ $PID_CB{$pid} || {} }),	1506	for values %{ $PID_CB{$rpid} || {} },
908	(values %{ $PID_CB{0} || {} });	1507	values %{ $PID_CB{0} || {} };
909	}
910
911	undef $PID_IDLE;
912	}	1508	}
913		1509
914	sub _sigchld {	1510	sub _sigchld {
915	# make sure we deliver these changes "synchronous" with the event loop.	1511	my $pid;
916	$CHLD_DELAY_W ||= AnyEvent->timer (after => 0, cb => sub {	1512
917	undef $CHLD_DELAY_W;	1513	AnyEvent->_emit_childstatus ($pid, $?)
918	&_child_wait;	1514	while ($pid = waitpid -1, $WNOHANG) > 0;
919	});
920	}	1515	}
921		1516
922	sub child {	1517	sub child {
923	my (undef, %arg) = @_;	1518	my (undef, %arg) = @_;
924		1519
925	defined (my $pid = $arg{pid} + 0)	1520	defined (my $pid = $arg{pid} + 0)
926	or Carp::croak "required option 'pid' is missing";	1521	or Carp::croak "required option 'pid' is missing";
927		1522
928	$PID_CB{$pid}{$arg{cb}} = $arg{cb};	1523	$PID_CB{$pid}{$arg{cb}} = $arg{cb};
929		1524
930	unless ($WNOHANG) {	1525	# WNOHANG is almost cetrainly 1 everywhere
		1526	$WNOHANG ||= $^O =~ /^(?:openbsd|netbsd|linux|freebsd|cygwin|MSWin32)$/
		1527	? 1
931	$WNOHANG = eval { local $SIG{__DIE__}; require POSIX; &POSIX::WNOHANG } || 1;	1528	: eval { local $SIG{__DIE__}; require POSIX; &POSIX::WNOHANG } || 1;
932	}
933		1529
934	unless ($CHLD_W) {	1530	unless ($CHLD_W) {
935	$CHLD_W = AnyEvent->signal (signal => 'CHLD', cb => \&_sigchld);	1531	$CHLD_W = AnyEvent->signal (signal => 'CHLD', cb => \&_sigchld);
936	# child could be a zombie already, so make at least one round	1532	# child could be a zombie already, so make at least one round
937	&_sigchld;	1533	&_sigchld;
938	}	1534	}
939		1535
940	bless [$pid, $arg{cb}], "AnyEvent::Base::Child"	1536	bless [$pid, $arg{cb}], "AnyEvent::Base::child"
941	}	1537	}
942		1538
943	sub AnyEvent::Base::Child::DESTROY {	1539	sub AnyEvent::Base::child::DESTROY {
944	my ($pid, $cb) = @{$_[0]};	1540	my ($pid, $cb) = @{$_[0]};
945		1541
946	delete $PID_CB{$pid}{$cb};	1542	delete $PID_CB{$pid}{$cb};
947	delete $PID_CB{$pid} unless keys %{ $PID_CB{$pid} };	1543	delete $PID_CB{$pid} unless keys %{ $PID_CB{$pid} };
948		1544
949	undef $CHLD_W unless keys %PID_CB;	1545	undef $CHLD_W unless keys %PID_CB;
950	}	1546	}
951		1547
		1548	# idle emulation is done by simply using a timer, regardless
		1549	# of whether the process is idle or not, and not letting
		1550	# the callback use more than 50% of the time.
		1551	sub idle {
		1552	my (undef, %arg) = @_;
		1553
		1554	my ($cb, $w, $rcb) = $arg{cb};
		1555
		1556	$rcb = sub {
		1557	if ($cb) {
		1558	$w = _time;
		1559	&$cb;
		1560	$w = _time - $w;
		1561
		1562	# never use more then 50% of the time for the idle watcher,
		1563	# within some limits
		1564	$w = 0.0001 if $w < 0.0001;
		1565	$w = 5 if $w > 5;
		1566
		1567	$w = AnyEvent->timer (after => $w, cb => $rcb);
		1568	} else {
		1569	# clean up...
		1570	undef $w;
		1571	undef $rcb;
		1572	}
		1573	};
		1574
		1575	$w = AnyEvent->timer (after => 0.05, cb => $rcb);
		1576
		1577	bless \\$cb, "AnyEvent::Base::idle"
		1578	}
		1579
		1580	sub AnyEvent::Base::idle::DESTROY {
		1581	undef $${$_[0]};
		1582	}
		1583
952	package AnyEvent::CondVar;	1584	package AnyEvent::CondVar;
953		1585
954	our @ISA = AnyEvent::CondVar::Base::;	1586	our @ISA = AnyEvent::CondVar::Base::;
955		1587
956	package AnyEvent::CondVar::Base;	1588	package AnyEvent::CondVar::Base;
957		1589
958	use overload	1590	#use overload
959	'&{}' => sub { my $self = shift; sub { $self->send (@_) } },	1591	# '&{}' => sub { my $self = shift; sub { $self->send (@_) } },
960	fallback => 1;	1592	# fallback => 1;
		1593
		1594	# save 300+ kilobytes by dirtily hardcoding overloading
		1595	${"AnyEvent::CondVar::Base::OVERLOAD"}{dummy}++; # Register with magic by touching.
		1596	*{'AnyEvent::CondVar::Base::()'} = sub { }; # "Make it findable via fetchmethod."
		1597	*{'AnyEvent::CondVar::Base::(&{}'} = sub { my $self = shift; sub { $self->send (@_) } }; # &{}
		1598	${'AnyEvent::CondVar::Base::()'} = 1; # fallback
		1599
		1600	our $WAITING;
961		1601
962	sub _send {	1602	sub _send {
963	# nop	1603	# nop
964	}	1604	}
965		1605
…		…
978	sub ready {	1618	sub ready {
979	$_[0]{_ae_sent}	1619	$_[0]{_ae_sent}
980	}	1620	}
981		1621
982	sub _wait {	1622	sub _wait {
		1623	$WAITING
		1624	and !$_[0]{_ae_sent}
		1625	and Carp::croak "AnyEvent::CondVar: recursive blocking wait detected";
		1626
		1627	local $WAITING = 1;
983	AnyEvent->one_event while !$_[0]{_ae_sent};	1628	AnyEvent->one_event while !$_[0]{_ae_sent};
984	}	1629	}
985		1630
986	sub recv {	1631	sub recv {
987	$_[0]->_wait;	1632	$_[0]->_wait;
…		…
989	Carp::croak $_[0]{_ae_croak} if $_[0]{_ae_croak};	1634	Carp::croak $_[0]{_ae_croak} if $_[0]{_ae_croak};
990	wantarray ? @{ $_[0]{_ae_sent} } : $_[0]{_ae_sent}[0]	1635	wantarray ? @{ $_[0]{_ae_sent} } : $_[0]{_ae_sent}[0]
991	}	1636	}
992		1637
993	sub cb {	1638	sub cb {
994	$_[0]{_ae_cb} = $_[1] if @_ > 1;	1639	my $cv = shift;
		1640
		1641	@_
		1642	and $cv->{_ae_cb} = shift
		1643	and $cv->{_ae_sent}
		1644	and (delete $cv->{_ae_cb})->($cv);
995	$_[0]{_ae_cb}	1645	$cv->{_ae_cb}
996	}	1646	}
997		1647
998	sub begin {	1648	sub begin {
999	++$_[0]{_ae_counter};	1649	++$_[0]{_ae_counter};
1000	$_[0]{_ae_end_cb} = $_[1] if @_ > 1;	1650	$_[0]{_ae_end_cb} = $_[1] if @_ > 1;
…		…
1006	}	1656	}
1007		1657
1008	# undocumented/compatibility with pre-3.4	1658	# undocumented/compatibility with pre-3.4
1009	*broadcast = \&send;	1659	*broadcast = \&send;
1010	*wait = \&_wait;	1660	*wait = \&_wait;
		1661
		1662	#############################################################################
		1663	# "new" API, currently only emulation of it
		1664	#############################################################################
		1665
		1666	package AE;
		1667
		1668	sub io($$$) {
		1669	AnyEvent->io (fh => $_[0], poll => $_[1] ? "w" : "r", cb => $_[2])
		1670	}
		1671
		1672	sub timer($$$) {
		1673	AnyEvent->timer (after => $_[0], interval => $_[1], cb => $_[2]);
		1674	}
		1675
		1676	sub signal($$) {
		1677	AnyEvent->signal (signal => $_[0], cb => $_[1]);
		1678	}
		1679
		1680	sub child($$) {
		1681	AnyEvent->child (pid => $_[0], cb => $_[1]);
		1682	}
		1683
		1684	sub idle($) {
		1685	AnyEvent->idle (cb => $_[0]);
		1686	}
		1687
		1688	sub cv() {
		1689	AnyEvent->condvar
		1690	}
		1691
		1692	sub now() {
		1693	AnyEvent->now
		1694	}
		1695
		1696	sub now_update() {
		1697	AnyEvent->now_update
		1698	}
		1699
		1700	sub time() {
		1701	AnyEvent->time
		1702	}
		1703
		1704	=head1 ERROR AND EXCEPTION HANDLING
		1705
		1706	In general, AnyEvent does not do any error handling - it relies on the
		1707	caller to do that if required. The L<AnyEvent::Strict> module (see also
		1708	the C<PERL_ANYEVENT_STRICT> environment variable, below) provides strict
		1709	checking of all AnyEvent methods, however, which is highly useful during
		1710	development.
		1711
		1712	As for exception handling (i.e. runtime errors and exceptions thrown while
		1713	executing a callback), this is not only highly event-loop specific, but
		1714	also not in any way wrapped by this module, as this is the job of the main
		1715	program.
		1716
		1717	The pure perl event loop simply re-throws the exception (usually
		1718	within C<< condvar->recv >>), the L<Event> and L<EV> modules call C<<
		1719	$Event/EV::DIED->() >>, L<Glib> uses C<< install_exception_handler >> and
		1720	so on.
		1721
		1722	=head1 ENVIRONMENT VARIABLES
		1723
		1724	The following environment variables are used by this module or its
		1725	submodules.
		1726
		1727	Note that AnyEvent will remove I<all> environment variables starting with
		1728	C<PERL_ANYEVENT_> from C<%ENV> when it is loaded while taint mode is
		1729	enabled.
		1730
		1731	=over 4
		1732
		1733	=item C<PERL_ANYEVENT_VERBOSE>
		1734
		1735	By default, AnyEvent will be completely silent except in fatal
		1736	conditions. You can set this environment variable to make AnyEvent more
		1737	talkative.
		1738
		1739	When set to C<1> or higher, causes AnyEvent to warn about unexpected
		1740	conditions, such as not being able to load the event model specified by
		1741	C<PERL_ANYEVENT_MODEL>.
		1742
		1743	When set to C<2> or higher, cause AnyEvent to report to STDERR which event
		1744	model it chooses.
		1745
		1746	When set to C<8> or higher, then AnyEvent will report extra information on
		1747	which optional modules it loads and how it implements certain features.
		1748
		1749	=item C<PERL_ANYEVENT_STRICT>
		1750
		1751	AnyEvent does not do much argument checking by default, as thorough
		1752	argument checking is very costly. Setting this variable to a true value
		1753	will cause AnyEvent to load C<AnyEvent::Strict> and then to thoroughly
		1754	check the arguments passed to most method calls. If it finds any problems,
		1755	it will croak.
		1756
		1757	In other words, enables "strict" mode.
		1758
		1759	Unlike C<use strict> (or it's modern cousin, C<< use L<common::sense>
		1760	>>, it is definitely recommended to keep it off in production. Keeping
		1761	C<PERL_ANYEVENT_STRICT=1> in your environment while developing programs
		1762	can be very useful, however.
		1763
		1764	=item C<PERL_ANYEVENT_MODEL>
		1765
		1766	This can be used to specify the event model to be used by AnyEvent, before
		1767	auto detection and -probing kicks in. It must be a string consisting
		1768	entirely of ASCII letters. The string C<AnyEvent::Impl::> gets prepended
		1769	and the resulting module name is loaded and if the load was successful,
		1770	used as event model. If it fails to load AnyEvent will proceed with
		1771	auto detection and -probing.
		1772
		1773	This functionality might change in future versions.
		1774
		1775	For example, to force the pure perl model (L<AnyEvent::Impl::Perl>) you
		1776	could start your program like this:
		1777
		1778	PERL_ANYEVENT_MODEL=Perl perl ...
		1779
		1780	=item C<PERL_ANYEVENT_PROTOCOLS>
		1781
		1782	Used by both L<AnyEvent::DNS> and L<AnyEvent::Socket> to determine preferences
		1783	for IPv4 or IPv6. The default is unspecified (and might change, or be the result
		1784	of auto probing).
		1785
		1786	Must be set to a comma-separated list of protocols or address families,
		1787	current supported: C<ipv4> and C<ipv6>. Only protocols mentioned will be
		1788	used, and preference will be given to protocols mentioned earlier in the
		1789	list.
		1790
		1791	This variable can effectively be used for denial-of-service attacks
		1792	against local programs (e.g. when setuid), although the impact is likely
		1793	small, as the program has to handle conenction and other failures anyways.
		1794
		1795	Examples: C<PERL_ANYEVENT_PROTOCOLS=ipv4,ipv6> - prefer IPv4 over IPv6,
		1796	but support both and try to use both. C<PERL_ANYEVENT_PROTOCOLS=ipv4>
		1797	- only support IPv4, never try to resolve or contact IPv6
		1798	addresses. C<PERL_ANYEVENT_PROTOCOLS=ipv6,ipv4> support either IPv4 or
		1799	IPv6, but prefer IPv6 over IPv4.
		1800
		1801	=item C<PERL_ANYEVENT_EDNS0>
		1802
		1803	Used by L<AnyEvent::DNS> to decide whether to use the EDNS0 extension
		1804	for DNS. This extension is generally useful to reduce DNS traffic, but
		1805	some (broken) firewalls drop such DNS packets, which is why it is off by
		1806	default.
		1807
		1808	Setting this variable to C<1> will cause L<AnyEvent::DNS> to announce
		1809	EDNS0 in its DNS requests.
		1810
		1811	=item C<PERL_ANYEVENT_MAX_FORKS>
		1812
		1813	The maximum number of child processes that C<AnyEvent::Util::fork_call>
		1814	will create in parallel.
		1815
		1816	=item C<PERL_ANYEVENT_MAX_OUTSTANDING_DNS>
		1817
		1818	The default value for the C<max_outstanding> parameter for the default DNS
		1819	resolver - this is the maximum number of parallel DNS requests that are
		1820	sent to the DNS server.
		1821
		1822	=item C<PERL_ANYEVENT_RESOLV_CONF>
		1823
		1824	The file to use instead of F</etc/resolv.conf> (or OS-specific
		1825	configuration) in the default resolver. When set to the empty string, no
		1826	default config will be used.
		1827
		1828	=item C<PERL_ANYEVENT_CA_FILE>, C<PERL_ANYEVENT_CA_PATH>.
		1829
		1830	When neither C<ca_file> nor C<ca_path> was specified during
		1831	L<AnyEvent::TLS> context creation, and either of these environment
		1832	variables exist, they will be used to specify CA certificate locations
		1833	instead of a system-dependent default.
		1834
		1835	=item C<PERL_ANYEVENT_AVOID_GUARD> and C<PERL_ANYEVENT_AVOID_ASYNC_INTERRUPT>
		1836
		1837	When these are set to C<1>, then the respective modules are not
		1838	loaded. Mostly good for testing AnyEvent itself.
		1839
		1840	=back
1011		1841
1012	=head1 SUPPLYING YOUR OWN EVENT MODEL INTERFACE	1842	=head1 SUPPLYING YOUR OWN EVENT MODEL INTERFACE
1013		1843
1014	This is an advanced topic that you do not normally need to use AnyEvent in	1844	This is an advanced topic that you do not normally need to use AnyEvent in
1015	a module. This section is only of use to event loop authors who want to	1845	a module. This section is only of use to event loop authors who want to
…		…
1049		1879
1050	I<rxvt-unicode> also cheats a bit by not providing blocking access to	1880	I<rxvt-unicode> also cheats a bit by not providing blocking access to
1051	condition variables: code blocking while waiting for a condition will	1881	condition variables: code blocking while waiting for a condition will
1052	C<die>. This still works with most modules/usages, and blocking calls must	1882	C<die>. This still works with most modules/usages, and blocking calls must
1053	not be done in an interactive application, so it makes sense.	1883	not be done in an interactive application, so it makes sense.
1054
1055	=head1 ENVIRONMENT VARIABLES
1056
1057	The following environment variables are used by this module:
1058
1059	=over 4
1060
1061	=item C<PERL_ANYEVENT_VERBOSE>
1062
1063	By default, AnyEvent will be completely silent except in fatal
1064	conditions. You can set this environment variable to make AnyEvent more
1065	talkative.
1066
1067	When set to C<1> or higher, causes AnyEvent to warn about unexpected
1068	conditions, such as not being able to load the event model specified by
1069	C<PERL_ANYEVENT_MODEL>.
1070
1071	When set to C<2> or higher, cause AnyEvent to report to STDERR which event
1072	model it chooses.
1073
1074	=item C<PERL_ANYEVENT_MODEL>
1075
1076	This can be used to specify the event model to be used by AnyEvent, before
1077	auto detection and -probing kicks in. It must be a string consisting
1078	entirely of ASCII letters. The string C<AnyEvent::Impl::> gets prepended
1079	and the resulting module name is loaded and if the load was successful,
1080	used as event model. If it fails to load AnyEvent will proceed with
1081	auto detection and -probing.
1082
1083	This functionality might change in future versions.
1084
1085	For example, to force the pure perl model (L<AnyEvent::Impl::Perl>) you
1086	could start your program like this:
1087
1088	PERL_ANYEVENT_MODEL=Perl perl ...
1089
1090	=item C<PERL_ANYEVENT_PROTOCOLS>
1091
1092	Used by both L<AnyEvent::DNS> and L<AnyEvent::Socket> to determine preferences
1093	for IPv4 or IPv6. The default is unspecified (and might change, or be the result
1094	of auto probing).
1095
1096	Must be set to a comma-separated list of protocols or address families,
1097	current supported: C<ipv4> and C<ipv6>. Only protocols mentioned will be
1098	used, and preference will be given to protocols mentioned earlier in the
1099	list.
1100
1101	This variable can effectively be used for denial-of-service attacks
1102	against local programs (e.g. when setuid), although the impact is likely
1103	small, as the program has to handle connection errors already-
1104
1105	Examples: C<PERL_ANYEVENT_PROTOCOLS=ipv4,ipv6> - prefer IPv4 over IPv6,
1106	but support both and try to use both. C<PERL_ANYEVENT_PROTOCOLS=ipv4>
1107	- only support IPv4, never try to resolve or contact IPv6
1108	addresses. C<PERL_ANYEVENT_PROTOCOLS=ipv6,ipv4> support either IPv4 or
1109	IPv6, but prefer IPv6 over IPv4.
1110
1111	=item C<PERL_ANYEVENT_EDNS0>
1112
1113	Used by L<AnyEvent::DNS> to decide whether to use the EDNS0 extension
1114	for DNS. This extension is generally useful to reduce DNS traffic, but
1115	some (broken) firewalls drop such DNS packets, which is why it is off by
1116	default.
1117
1118	Setting this variable to C<1> will cause L<AnyEvent::DNS> to announce
1119	EDNS0 in its DNS requests.
1120
1121	=back
1122		1884
1123	=head1 EXAMPLE PROGRAM	1885	=head1 EXAMPLE PROGRAM
1124		1886
1125	The following program uses an I/O watcher to read data from STDIN, a timer	1887	The following program uses an I/O watcher to read data from STDIN, a timer
1126	to display a message once per second, and a condition variable to quit the	1888	to display a message once per second, and a condition variable to quit the
…		…
1320	watcher.	2082	watcher.
1321		2083
1322	=head3 Results	2084	=head3 Results
1323		2085
1324	name watchers bytes create invoke destroy comment	2086	name watchers bytes create invoke destroy comment
1325	EV/EV 400000 244 0.56 0.46 0.31 EV native interface	2087	EV/EV 400000 224 0.47 0.35 0.27 EV native interface
1326	EV/Any 100000 244 2.50 0.46 0.29 EV + AnyEvent watchers	2088	EV/Any 100000 224 2.88 0.34 0.27 EV + AnyEvent watchers
1327	CoroEV/Any 100000 244 2.49 0.44 0.29 coroutines + Coro::Signal	2089	CoroEV/Any 100000 224 2.85 0.35 0.28 coroutines + Coro::Signal
1328	Perl/Any 100000 513 4.92 0.87 1.12 pure perl implementation	2090	Perl/Any 100000 452 4.13 0.73 0.95 pure perl implementation
1329	Event/Event 16000 516 31.88 31.30 0.85 Event native interface	2091	Event/Event 16000 517 32.20 31.80 0.81 Event native interface
1330	Event/Any 16000 590 35.75 31.42 1.08 Event + AnyEvent watchers	2092	Event/Any 16000 590 35.85 31.55 1.06 Event + AnyEvent watchers
		2093	IOAsync/Any 16000 989 38.10 32.77 11.13 via IO::Async::Loop::IO_Poll
		2094	IOAsync/Any 16000 990 37.59 29.50 10.61 via IO::Async::Loop::Epoll
1331	Glib/Any 16000 1357 98.22 12.41 54.00 quadratic behaviour	2095	Glib/Any 16000 1357 102.33 12.31 51.00 quadratic behaviour
1332	Tk/Any 2000 1860 26.97 67.98 14.00 SEGV with >> 2000 watchers	2096	Tk/Any 2000 1860 27.20 66.31 14.00 SEGV with >> 2000 watchers
1333	POE/Event 2000 6644 108.64 736.02 14.73 via POE::Loop::Event	2097	POE/Event 2000 6328 109.99 751.67 14.02 via POE::Loop::Event
1334	POE/Select 2000 6343 94.13 809.12 565.96 via POE::Loop::Select	2098	POE/Select 2000 6027 94.54 809.13 579.80 via POE::Loop::Select
1335		2099
1336	=head3 Discussion	2100	=head3 Discussion
1337		2101
1338	The benchmark does I<not> measure scalability of the event loop very	2102	The benchmark does I<not> measure scalability of the event loop very
1339	well. For example, a select-based event loop (such as the pure perl one)	2103	well. For example, a select-based event loop (such as the pure perl one)
…		…
1364	performance becomes really bad with lots of file descriptors (and few of	2128	performance becomes really bad with lots of file descriptors (and few of
1365	them active), of course, but this was not subject of this benchmark.	2129	them active), of course, but this was not subject of this benchmark.
1366		2130
1367	The C<Event> module has a relatively high setup and callback invocation	2131	The C<Event> module has a relatively high setup and callback invocation
1368	cost, but overall scores in on the third place.	2132	cost, but overall scores in on the third place.
		2133
		2134	C<IO::Async> performs admirably well, about on par with C<Event>, even
		2135	when using its pure perl backend.
1369		2136
1370	C<Glib>'s memory usage is quite a bit higher, but it features a	2137	C<Glib>'s memory usage is quite a bit higher, but it features a
1371	faster callback invocation and overall ends up in the same class as	2138	faster callback invocation and overall ends up in the same class as
1372	C<Event>. However, Glib scales extremely badly, doubling the number of	2139	C<Event>. However, Glib scales extremely badly, doubling the number of
1373	watchers increases the processing time by more than a factor of four,	2140	watchers increases the processing time by more than a factor of four,
…		…
1451	it to another server. This includes deleting the old timeout and creating	2218	it to another server. This includes deleting the old timeout and creating
1452	a new one that moves the timeout into the future.	2219	a new one that moves the timeout into the future.
1453		2220
1454	=head3 Results	2221	=head3 Results
1455		2222
1456	name sockets create request	2223	name sockets create request
1457	EV 20000 69.01 11.16	2224	EV 20000 69.01 11.16
1458	Perl 20000 73.32 35.87	2225	Perl 20000 73.32 35.87
		2226	IOAsync 20000 157.00 98.14 epoll
		2227	IOAsync 20000 159.31 616.06 poll
1459	Event 20000 212.62 257.32	2228	Event 20000 212.62 257.32
1460	Glib 20000 651.16 1896.30	2229	Glib 20000 651.16 1896.30
1461	POE 20000 349.67 12317.24 uses POE::Loop::Event	2230	POE 20000 349.67 12317.24 uses POE::Loop::Event
1462		2231
1463	=head3 Discussion	2232	=head3 Discussion
1464		2233
1465	This benchmark I<does> measure scalability and overall performance of the	2234	This benchmark I<does> measure scalability and overall performance of the
1466	particular event loop.	2235	particular event loop.
…		…
1468	EV is again fastest. Since it is using epoll on my system, the setup time	2237	EV is again fastest. Since it is using epoll on my system, the setup time
1469	is relatively high, though.	2238	is relatively high, though.
1470		2239
1471	Perl surprisingly comes second. It is much faster than the C-based event	2240	Perl surprisingly comes second. It is much faster than the C-based event
1472	loops Event and Glib.	2241	loops Event and Glib.
		2242
		2243	IO::Async performs very well when using its epoll backend, and still quite
		2244	good compared to Glib when using its pure perl backend.
1473		2245
1474	Event suffers from high setup time as well (look at its code and you will	2246	Event suffers from high setup time as well (look at its code and you will
1475	understand why). Callback invocation also has a high overhead compared to	2247	understand why). Callback invocation also has a high overhead compared to
1476	the C<< $_->() for .. >>-style loop that the Perl event loop uses. Event	2248	the C<< $_->() for .. >>-style loop that the Perl event loop uses. Event
1477	uses select or poll in basically all documented configurations.	2249	uses select or poll in basically all documented configurations.
…		…
1540	=item * C-based event loops perform very well with small number of	2312	=item * C-based event loops perform very well with small number of
1541	watchers, as the management overhead dominates.	2313	watchers, as the management overhead dominates.
1542		2314
1543	=back	2315	=back
1544		2316
		2317	=head2 THE IO::Lambda BENCHMARK
		2318
		2319	Recently I was told about the benchmark in the IO::Lambda manpage, which
		2320	could be misinterpreted to make AnyEvent look bad. In fact, the benchmark
		2321	simply compares IO::Lambda with POE, and IO::Lambda looks better (which
		2322	shouldn't come as a surprise to anybody). As such, the benchmark is
		2323	fine, and mostly shows that the AnyEvent backend from IO::Lambda isn't
		2324	very optimal. But how would AnyEvent compare when used without the extra
		2325	baggage? To explore this, I wrote the equivalent benchmark for AnyEvent.
		2326
		2327	The benchmark itself creates an echo-server, and then, for 500 times,
		2328	connects to the echo server, sends a line, waits for the reply, and then
		2329	creates the next connection. This is a rather bad benchmark, as it doesn't
		2330	test the efficiency of the framework or much non-blocking I/O, but it is a
		2331	benchmark nevertheless.
		2332
		2333	name runtime
		2334	Lambda/select 0.330 sec
		2335	+ optimized 0.122 sec
		2336	Lambda/AnyEvent 0.327 sec
		2337	+ optimized 0.138 sec
		2338	Raw sockets/select 0.077 sec
		2339	POE/select, components 0.662 sec
		2340	POE/select, raw sockets 0.226 sec
		2341	POE/select, optimized 0.404 sec
		2342
		2343	AnyEvent/select/nb 0.085 sec
		2344	AnyEvent/EV/nb 0.068 sec
		2345	+state machine 0.134 sec
		2346
		2347	The benchmark is also a bit unfair (my fault): the IO::Lambda/POE
		2348	benchmarks actually make blocking connects and use 100% blocking I/O,
		2349	defeating the purpose of an event-based solution. All of the newly
		2350	written AnyEvent benchmarks use 100% non-blocking connects (using
		2351	AnyEvent::Socket::tcp_connect and the asynchronous pure perl DNS
		2352	resolver), so AnyEvent is at a disadvantage here, as non-blocking connects
		2353	generally require a lot more bookkeeping and event handling than blocking
		2354	connects (which involve a single syscall only).
		2355
		2356	The last AnyEvent benchmark additionally uses L<AnyEvent::Handle>, which
		2357	offers similar expressive power as POE and IO::Lambda, using conventional
		2358	Perl syntax. This means that both the echo server and the client are 100%
		2359	non-blocking, further placing it at a disadvantage.
		2360
		2361	As you can see, the AnyEvent + EV combination even beats the
		2362	hand-optimised "raw sockets benchmark", while AnyEvent + its pure perl
		2363	backend easily beats IO::Lambda and POE.
		2364
		2365	And even the 100% non-blocking version written using the high-level (and
		2366	slow :) L<AnyEvent::Handle> abstraction beats both POE and IO::Lambda by a
		2367	large margin, even though it does all of DNS, tcp-connect and socket I/O
		2368	in a non-blocking way.
		2369
		2370	The two AnyEvent benchmarks programs can be found as F<eg/ae0.pl> and
		2371	F<eg/ae2.pl> in the AnyEvent distribution, the remaining benchmarks are
		2372	part of the IO::lambda distribution and were used without any changes.
		2373
		2374
		2375	=head1 SIGNALS
		2376
		2377	AnyEvent currently installs handlers for these signals:
		2378
		2379	=over 4
		2380
		2381	=item SIGCHLD
		2382
		2383	A handler for C<SIGCHLD> is installed by AnyEvent's child watcher
		2384	emulation for event loops that do not support them natively. Also, some
		2385	event loops install a similar handler.
		2386
		2387	Additionally, when AnyEvent is loaded and SIGCHLD is set to IGNORE, then
		2388	AnyEvent will reset it to default, to avoid losing child exit statuses.
		2389
		2390	=item SIGPIPE
		2391
		2392	A no-op handler is installed for C<SIGPIPE> when C<$SIG{PIPE}> is C<undef>
		2393	when AnyEvent gets loaded.
		2394
		2395	The rationale for this is that AnyEvent users usually do not really depend
		2396	on SIGPIPE delivery (which is purely an optimisation for shell use, or
		2397	badly-written programs), but C<SIGPIPE> can cause spurious and rare
		2398	program exits as a lot of people do not expect C<SIGPIPE> when writing to
		2399	some random socket.
		2400
		2401	The rationale for installing a no-op handler as opposed to ignoring it is
		2402	that this way, the handler will be restored to defaults on exec.
		2403
		2404	Feel free to install your own handler, or reset it to defaults.
		2405
		2406	=back
		2407
		2408	=cut
		2409
		2410	undef $SIG{CHLD}
		2411	if $SIG{CHLD} eq 'IGNORE';
		2412
		2413	$SIG{PIPE} = sub { }
		2414	unless defined $SIG{PIPE};
		2415
		2416	=head1 RECOMMENDED/OPTIONAL MODULES
		2417
		2418	One of AnyEvent's main goals is to be 100% Pure-Perl(tm): only perl (and
		2419	it's built-in modules) are required to use it.
		2420
		2421	That does not mean that AnyEvent won't take advantage of some additional
		2422	modules if they are installed.
		2423
		2424	This section epxlains which additional modules will be used, and how they
		2425	affect AnyEvent's operetion.
		2426
		2427	=over 4
		2428
		2429	=item L<Async::Interrupt>
		2430
		2431	This slightly arcane module is used to implement fast signal handling: To
		2432	my knowledge, there is no way to do completely race-free and quick
		2433	signal handling in pure perl. To ensure that signals still get
		2434	delivered, AnyEvent will start an interval timer to wake up perl (and
		2435	catch the signals) with some delay (default is 10 seconds, look for
		2436	C<$AnyEvent::MAX_SIGNAL_LATENCY>).
		2437
		2438	If this module is available, then it will be used to implement signal
		2439	catching, which means that signals will not be delayed, and the event loop
		2440	will not be interrupted regularly, which is more efficient (And good for
		2441	battery life on laptops).
		2442
		2443	This affects not just the pure-perl event loop, but also other event loops
		2444	that have no signal handling on their own (e.g. Glib, Tk, Qt).
		2445
		2446	Some event loops (POE, Event, Event::Lib) offer signal watchers natively,
		2447	and either employ their own workarounds (POE) or use AnyEvent's workaround
		2448	(using C<$AnyEvent::MAX_SIGNAL_LATENCY>). Installing L<Async::Interrupt>
		2449	does nothing for those backends.
		2450
		2451	=item L<EV>
		2452
		2453	This module isn't really "optional", as it is simply one of the backend
		2454	event loops that AnyEvent can use. However, it is simply the best event
		2455	loop available in terms of features, speed and stability: It supports
		2456	the AnyEvent API optimally, implements all the watcher types in XS, does
		2457	automatic timer adjustments even when no monotonic clock is available,
		2458	can take avdantage of advanced kernel interfaces such as C<epoll> and
		2459	C<kqueue>, and is the fastest backend I<by far>. You can even embed
		2460	L<Glib>/L<Gtk2> in it (or vice versa, see L<EV::Glib> and L<Glib::EV>).
		2461
		2462	=item L<Guard>
		2463
		2464	The guard module, when used, will be used to implement
		2465	C<AnyEvent::Util::guard>. This speeds up guards considerably (and uses a
		2466	lot less memory), but otherwise doesn't affect guard operation much. It is
		2467	purely used for performance.
		2468
		2469	=item L<JSON> and L<JSON::XS>
		2470
		2471	This module is required when you want to read or write JSON data via
		2472	L<AnyEvent::Handle>. It is also written in pure-perl, but can take
		2473	advantage of the ultra-high-speed L<JSON::XS> module when it is installed.
		2474
		2475	In fact, L<AnyEvent::Handle> will use L<JSON::XS> by default if it is
		2476	installed.
		2477
		2478	=item L<Net::SSLeay>
		2479
		2480	Implementing TLS/SSL in Perl is certainly interesting, but not very
		2481	worthwhile: If this module is installed, then L<AnyEvent::Handle> (with
		2482	the help of L<AnyEvent::TLS>), gains the ability to do TLS/SSL.
		2483
		2484	=item L<Time::HiRes>
		2485
		2486	This module is part of perl since release 5.008. It will be used when the
		2487	chosen event library does not come with a timing source on it's own. The
		2488	pure-perl event loop (L<AnyEvent::Impl::Perl>) will additionally use it to
		2489	try to use a monotonic clock for timing stability.
		2490
		2491	=back
		2492
1545		2493
1546	=head1 FORK	2494	=head1 FORK
1547		2495
1548	Most event libraries are not fork-safe. The ones who are usually are	2496	Most event libraries are not fork-safe. The ones who are usually are
1549	because they rely on inefficient but fork-safe C<select> or C<poll>	2497	because they rely on inefficient but fork-safe C<select> or C<poll>
1550	calls. Only L<EV> is fully fork-aware.	2498	calls. Only L<EV> is fully fork-aware.
1551		2499
1552	If you have to fork, you must either do so I<before> creating your first	2500	If you have to fork, you must either do so I<before> creating your first
1553	watcher OR you must not use AnyEvent at all in the child.	2501	watcher OR you must not use AnyEvent at all in the child OR you must do
		2502	something completely out of the scope of AnyEvent.
1554		2503
1555		2504
1556	=head1 SECURITY CONSIDERATIONS	2505	=head1 SECURITY CONSIDERATIONS
1557		2506
1558	AnyEvent can be forced to load any event model via	2507	AnyEvent can be forced to load any event model via
…		…
1563	specified in the variable.	2512	specified in the variable.
1564		2513
1565	You can make AnyEvent completely ignore this variable by deleting it	2514	You can make AnyEvent completely ignore this variable by deleting it
1566	before the first watcher gets created, e.g. with a C<BEGIN> block:	2515	before the first watcher gets created, e.g. with a C<BEGIN> block:
1567		2516
1568	BEGIN { delete $ENV{PERL_ANYEVENT_MODEL} }	2517	BEGIN { delete $ENV{PERL_ANYEVENT_MODEL} }
1569		2518
1570	use AnyEvent;	2519	use AnyEvent;
1571		2520
1572	Similar considerations apply to $ENV{PERL_ANYEVENT_VERBOSE}, as that can	2521	Similar considerations apply to $ENV{PERL_ANYEVENT_VERBOSE}, as that can
1573	be used to probe what backend is used and gain other information (which is	2522	be used to probe what backend is used and gain other information (which is
1574	probably even less useful to an attacker than PERL_ANYEVENT_MODEL).	2523	probably even less useful to an attacker than PERL_ANYEVENT_MODEL), and
		2524	$ENV{PERL_ANYEVENT_STRICT}.
		2525
		2526	Note that AnyEvent will remove I<all> environment variables starting with
		2527	C<PERL_ANYEVENT_> from C<%ENV> when it is loaded while taint mode is
		2528	enabled.
		2529
		2530
		2531	=head1 BUGS
		2532
		2533	Perl 5.8 has numerous memleaks that sometimes hit this module and are hard
		2534	to work around. If you suffer from memleaks, first upgrade to Perl 5.10
		2535	and check wether the leaks still show up. (Perl 5.10.0 has other annoying
		2536	memleaks, such as leaking on C<map> and C<grep> but it is usually not as
		2537	pronounced).
1575		2538
1576		2539
1577	=head1 SEE ALSO	2540	=head1 SEE ALSO
1578		2541
1579	Utility functions: L<AnyEvent::Util>.	2542	Utility functions: L<AnyEvent::Util>.
…		…
1582	L<Glib>, L<Tk>, L<Event::Lib>, L<Qt>, L<POE>.	2545	L<Glib>, L<Tk>, L<Event::Lib>, L<Qt>, L<POE>.
1583		2546
1584	Implementations: L<AnyEvent::Impl::EV>, L<AnyEvent::Impl::Event>,	2547	Implementations: L<AnyEvent::Impl::EV>, L<AnyEvent::Impl::Event>,
1585	L<AnyEvent::Impl::Glib>, L<AnyEvent::Impl::Tk>, L<AnyEvent::Impl::Perl>,	2548	L<AnyEvent::Impl::Glib>, L<AnyEvent::Impl::Tk>, L<AnyEvent::Impl::Perl>,
1586	L<AnyEvent::Impl::EventLib>, L<AnyEvent::Impl::Qt>,	2549	L<AnyEvent::Impl::EventLib>, L<AnyEvent::Impl::Qt>,
1587	L<AnyEvent::Impl::POE>.	2550	L<AnyEvent::Impl::POE>, L<AnyEvent::Impl::IOAsync>, L<Anyevent::Impl::Irssi>.
1588		2551
1589	Non-blocking file handles, sockets, TCP clients and	2552	Non-blocking file handles, sockets, TCP clients and
1590	servers: L<AnyEvent::Handle>, L<AnyEvent::Socket>.	2553	servers: L<AnyEvent::Handle>, L<AnyEvent::Socket>, L<AnyEvent::TLS>.
1591		2554
1592	Asynchronous DNS: L<AnyEvent::DNS>.	2555	Asynchronous DNS: L<AnyEvent::DNS>.
1593		2556
1594	Coroutine support: L<Coro>, L<Coro::AnyEvent>, L<Coro::EV>, L<Coro::Event>,	2557	Coroutine support: L<Coro>, L<Coro::AnyEvent>, L<Coro::EV>,
		2558	L<Coro::Event>,
1595		2559
1596	Nontrivial usage examples: L<Net::FCP>, L<Net::XMPP2>, L<AnyEvent::DNS>.	2560	Nontrivial usage examples: L<AnyEvent::GPSD>, L<AnyEvent::XMPP>,
		2561	L<AnyEvent::HTTP>.
1597		2562
1598		2563
1599	=head1 AUTHOR	2564	=head1 AUTHOR
1600		2565
1601	Marc Lehmann <schmorp@schmorp.de>	2566	Marc Lehmann <schmorp@schmorp.de>
1602	http://home.schmorp.de/	2567	http://home.schmorp.de/
1603		2568
1604	=cut	2569	=cut
1605		2570
1606	1	2571	1
1607		2572

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines