ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent.pm

Comparing AnyEvent/lib/AnyEvent.pm (file contents):
Revision 1.159 by root, Fri Jun 6 16:19:19 2008 UTC vs.
Revision 1.245 by root, Sat Jul 18 05:19:09 2009 UTC

1	=head1 NAME	1	=head1 NAME
2		2
3	AnyEvent - provide framework for multiple event loops	3	AnyEvent - provide framework for multiple event loops
4		4
5	EV, Event, Glib, Tk, Perl, Event::Lib, Qt, POE - various supported event loops	5	EV, Event, Glib, Tk, Perl, Event::Lib, Qt and POE are various supported
		6	event loops.
6		7
7	=head1 SYNOPSIS	8	=head1 SYNOPSIS
8		9
9	use AnyEvent;	10	use AnyEvent;
10		11
		12	# file descriptor readable
11	my $w = AnyEvent->io (fh => $fh, poll => "r|w", cb => sub {	13	my $w = AnyEvent->io (fh => $fh, poll => "r", cb => sub { ... });
		14
		15	# one-shot or repeating timers
		16	my $w = AnyEvent->timer (after => $seconds, cb => sub { ... });
		17	my $w = AnyEvent->timer (after => $seconds, interval => $seconds, cb => ...
		18
		19	print AnyEvent->now; # prints current event loop time
		20	print AnyEvent->time; # think Time::HiRes::time or simply CORE::time.
		21
		22	# POSIX signal
		23	my $w = AnyEvent->signal (signal => "TERM", cb => sub { ... });
		24
		25	# child process exit
		26	my $w = AnyEvent->child (pid => $pid, cb => sub {
		27	my ($pid, $status) = @_;
12	...	28	...
13	});	29	});
14		30
15	my $w = AnyEvent->timer (after => $seconds, cb => sub {	31	# called when event loop idle (if applicable)
16	...	32	my $w = AnyEvent->idle (cb => sub { ... });
17	});
18		33
19	my $w = AnyEvent->condvar; # stores whether a condition was flagged	34	my $w = AnyEvent->condvar; # stores whether a condition was flagged
20	$w->send; # wake up current and all future recv's	35	$w->send; # wake up current and all future recv's
21	$w->recv; # enters "main loop" till $condvar gets ->send	36	$w->recv; # enters "main loop" till $condvar gets ->send
		37	# use a condvar in callback mode:
		38	$w->cb (sub { $_[0]->recv });
22		39
23	=head1 INTRODUCTION/TUTORIAL	40	=head1 INTRODUCTION/TUTORIAL
24		41
25	This manpage is mainly a reference manual. If you are interested	42	This manpage is mainly a reference manual. If you are interested
26	in a tutorial or some gentle introduction, have a look at the	43	in a tutorial or some gentle introduction, have a look at the
…		…
33		50
34	Executive Summary: AnyEvent is I<compatible>, AnyEvent is I<free of	51	Executive Summary: AnyEvent is I<compatible>, AnyEvent is I<free of
35	policy> and AnyEvent is I<small and efficient>.	52	policy> and AnyEvent is I<small and efficient>.
36		53
37	First and foremost, I<AnyEvent is not an event model> itself, it only	54	First and foremost, I<AnyEvent is not an event model> itself, it only
38	interfaces to whatever event model the main program happens to use in a	55	interfaces to whatever event model the main program happens to use, in a
39	pragmatic way. For event models and certain classes of immortals alike,	56	pragmatic way. For event models and certain classes of immortals alike,
40	the statement "there can only be one" is a bitter reality: In general,	57	the statement "there can only be one" is a bitter reality: In general,
41	only one event loop can be active at the same time in a process. AnyEvent	58	only one event loop can be active at the same time in a process. AnyEvent
42	helps hiding the differences between those event loops.	59	cannot change this, but it can hide the differences between those event
		60	loops.
43		61
44	The goal of AnyEvent is to offer module authors the ability to do event	62	The goal of AnyEvent is to offer module authors the ability to do event
45	programming (waiting for I/O or timer events) without subscribing to a	63	programming (waiting for I/O or timer events) without subscribing to a
46	religion, a way of living, and most importantly: without forcing your	64	religion, a way of living, and most importantly: without forcing your
47	module users into the same thing by forcing them to use the same event	65	module users into the same thing by forcing them to use the same event
48	model you use.	66	model you use.
49		67
50	For modules like POE or IO::Async (which is a total misnomer as it is	68	For modules like POE or IO::Async (which is a total misnomer as it is
51	actually doing all I/O I<synchronously>...), using them in your module is	69	actually doing all I/O I<synchronously>...), using them in your module is
52	like joining a cult: After you joined, you are dependent on them and you	70	like joining a cult: After you joined, you are dependent on them and you
53	cannot use anything else, as it is simply incompatible to everything that	71	cannot use anything else, as they are simply incompatible to everything
54	isn't itself. What's worse, all the potential users of your module are	72	that isn't them. What's worse, all the potential users of your
55	I<also> forced to use the same event loop you use.	73	module are I<also> forced to use the same event loop you use.
56		74
57	AnyEvent is different: AnyEvent + POE works fine. AnyEvent + Glib works	75	AnyEvent is different: AnyEvent + POE works fine. AnyEvent + Glib works
58	fine. AnyEvent + Tk works fine etc. etc. but none of these work together	76	fine. AnyEvent + Tk works fine etc. etc. but none of these work together
59	with the rest: POE + IO::Async? No go. Tk + Event? No go. Again: if	77	with the rest: POE + IO::Async? No go. Tk + Event? No go. Again: if
60	your module uses one of those, every user of your module has to use it,	78	your module uses one of those, every user of your module has to use it,
61	too. But if your module uses AnyEvent, it works transparently with all	79	too. But if your module uses AnyEvent, it works transparently with all
62	event models it supports (including stuff like POE and IO::Async, as long	80	event models it supports (including stuff like IO::Async, as long as those
63	as those use one of the supported event loops. It is trivial to add new	81	use one of the supported event loops. It is trivial to add new event loops
64	event loops to AnyEvent, too, so it is future-proof).	82	to AnyEvent, too, so it is future-proof).
65		83
66	In addition to being free of having to use I<the one and only true event	84	In addition to being free of having to use I<the one and only true event
67	model>, AnyEvent also is free of bloat and policy: with POE or similar	85	model>, AnyEvent also is free of bloat and policy: with POE or similar
68	modules, you get an enormous amount of code and strict rules you have to	86	modules, you get an enormous amount of code and strict rules you have to
69	follow. AnyEvent, on the other hand, is lean and up to the point, by only	87	follow. AnyEvent, on the other hand, is lean and up to the point, by only
…		…
127	These watchers are normal Perl objects with normal Perl lifetime. After	145	These watchers are normal Perl objects with normal Perl lifetime. After
128	creating a watcher it will immediately "watch" for events and invoke the	146	creating a watcher it will immediately "watch" for events and invoke the
129	callback when the event occurs (of course, only when the event model	147	callback when the event occurs (of course, only when the event model
130	is in control).	148	is in control).
131		149
		150	Note that B<callbacks must not permanently change global variables>
		151	potentially in use by the event loop (such as C<$_> or C<$[>) and that B<<
		152	callbacks must not C<die> >>. The former is good programming practise in
		153	Perl and the latter stems from the fact that exception handling differs
		154	widely between event loops.
		155
132	To disable the watcher you have to destroy it (e.g. by setting the	156	To disable the watcher you have to destroy it (e.g. by setting the
133	variable you store it in to C<undef> or otherwise deleting all references	157	variable you store it in to C<undef> or otherwise deleting all references
134	to it).	158	to it).
135		159
136	All watchers are created by calling a method on the C<AnyEvent> class.	160	All watchers are created by calling a method on the C<AnyEvent> class.
…		…
152	=head2 I/O WATCHERS	176	=head2 I/O WATCHERS
153		177
154	You can create an I/O watcher by calling the C<< AnyEvent->io >> method	178	You can create an I/O watcher by calling the C<< AnyEvent->io >> method
155	with the following mandatory key-value pairs as arguments:	179	with the following mandatory key-value pairs as arguments:
156		180
157	C<fh> the Perl I<file handle> (I<not> file descriptor) to watch	181	C<fh> is the Perl I<file handle> (or a naked file descriptor) to watch
		182	for events (AnyEvent might or might not keep a reference to this file
		183	handle). Note that only file handles pointing to things for which
		184	non-blocking operation makes sense are allowed. This includes sockets,
		185	most character devices, pipes, fifos and so on, but not for example files
		186	or block devices.
		187
158	for events. C<poll> must be a string that is either C<r> or C<w>,	188	C<poll> must be a string that is either C<r> or C<w>, which creates a
159	which creates a watcher waiting for "r"eadable or "w"ritable events,	189	watcher waiting for "r"eadable or "w"ritable events, respectively.
		190
160	respectively. C<cb> is the callback to invoke each time the file handle	191	C<cb> is the callback to invoke each time the file handle becomes ready.
161	becomes ready.
162		192
163	Although the callback might get passed parameters, their value and	193	Although the callback might get passed parameters, their value and
164	presence is undefined and you cannot rely on them. Portable AnyEvent	194	presence is undefined and you cannot rely on them. Portable AnyEvent
165	callbacks cannot use arguments passed to I/O watcher callbacks.	195	callbacks cannot use arguments passed to I/O watcher callbacks.
166		196
…		…
170		200
171	Some event loops issue spurious readyness notifications, so you should	201	Some event loops issue spurious readyness notifications, so you should
172	always use non-blocking calls when reading/writing from/to your file	202	always use non-blocking calls when reading/writing from/to your file
173	handles.	203	handles.
174		204
175	Example:
176
177	# wait for readability of STDIN, then read a line and disable the watcher	205	Example: wait for readability of STDIN, then read a line and disable the
		206	watcher.
		207
178	my $w; $w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {	208	my $w; $w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {
179	chomp (my $input = <STDIN>);	209	chomp (my $input = <STDIN>);
180	warn "read: $input\n";	210	warn "read: $input\n";
181	undef $w;	211	undef $w;
182	});	212	});
…		…
192		222
193	Although the callback might get passed parameters, their value and	223	Although the callback might get passed parameters, their value and
194	presence is undefined and you cannot rely on them. Portable AnyEvent	224	presence is undefined and you cannot rely on them. Portable AnyEvent
195	callbacks cannot use arguments passed to time watcher callbacks.	225	callbacks cannot use arguments passed to time watcher callbacks.
196		226
197	The timer callback will be invoked at most once: if you want a repeating	227	The callback will normally be invoked once only. If you specify another
198	timer you have to create a new watcher (this is a limitation by both Tk	228	parameter, C<interval>, as a strictly positive number (> 0), then the
199	and Glib).	229	callback will be invoked regularly at that interval (in fractional
		230	seconds) after the first invocation. If C<interval> is specified with a
		231	false value, then it is treated as if it were missing.
200		232
201	Example:	233	The callback will be rescheduled before invoking the callback, but no
		234	attempt is done to avoid timer drift in most backends, so the interval is
		235	only approximate.
202		236
203	# fire an event after 7.7 seconds	237	Example: fire an event after 7.7 seconds.
		238
204	my $w = AnyEvent->timer (after => 7.7, cb => sub {	239	my $w = AnyEvent->timer (after => 7.7, cb => sub {
205	warn "timeout\n";	240	warn "timeout\n";
206	});	241	});
207		242
208	# to cancel the timer:	243	# to cancel the timer:
209	undef $w;	244	undef $w;
210		245
211	Example 2:
212
213	# fire an event after 0.5 seconds, then roughly every second	246	Example 2: fire an event after 0.5 seconds, then roughly every second.
214	my $w;
215		247
216	my $cb = sub {
217	# cancel the old timer while creating a new one
218	$w = AnyEvent->timer (after => 1, cb => $cb);	248	my $w = AnyEvent->timer (after => 0.5, interval => 1, cb => sub {
		249	warn "timeout\n";
219	};	250	};
220
221	# start the "loop" by creating the first watcher
222	$w = AnyEvent->timer (after => 0.5, cb => $cb);
223		251
224	=head3 TIMING ISSUES	252	=head3 TIMING ISSUES
225		253
226	There are two ways to handle timers: based on real time (relative, "fire	254	There are two ways to handle timers: based on real time (relative, "fire
227	in 10 seconds") and based on wallclock time (absolute, "fire at 12	255	in 10 seconds") and based on wallclock time (absolute, "fire at 12
…		…
300	In either case, if you care (and in most cases, you don't), then you	328	In either case, if you care (and in most cases, you don't), then you
301	can get whatever behaviour you want with any event loop, by taking the	329	can get whatever behaviour you want with any event loop, by taking the
302	difference between C<< AnyEvent->time >> and C<< AnyEvent->now >> into	330	difference between C<< AnyEvent->time >> and C<< AnyEvent->now >> into
303	account.	331	account.
304		332
		333	=item AnyEvent->now_update
		334
		335	Some event loops (such as L<EV> or L<AnyEvent::Impl::Perl>) cache
		336	the current time for each loop iteration (see the discussion of L<<
		337	AnyEvent->now >>, above).
		338
		339	When a callback runs for a long time (or when the process sleeps), then
		340	this "current" time will differ substantially from the real time, which
		341	might affect timers and time-outs.
		342
		343	When this is the case, you can call this method, which will update the
		344	event loop's idea of "current time".
		345
		346	Note that updating the time I<might> cause some events to be handled.
		347
305	=back	348	=back
306		349
307	=head2 SIGNAL WATCHERS	350	=head2 SIGNAL WATCHERS
308		351
309	You can watch for signals using a signal watcher, C<signal> is the signal	352	You can watch for signals using a signal watcher, C<signal> is the signal
310	I<name> without any C<SIG> prefix, C<cb> is the Perl callback to	353	I<name> in uppercase and without any C<SIG> prefix, C<cb> is the Perl
311	be invoked whenever a signal occurs.	354	callback to be invoked whenever a signal occurs.
312		355
313	Although the callback might get passed parameters, their value and	356	Although the callback might get passed parameters, their value and
314	presence is undefined and you cannot rely on them. Portable AnyEvent	357	presence is undefined and you cannot rely on them. Portable AnyEvent
315	callbacks cannot use arguments passed to signal watcher callbacks.	358	callbacks cannot use arguments passed to signal watcher callbacks.
316		359
…		…
318	invocation, and callback invocation will be synchronous. Synchronous means	361	invocation, and callback invocation will be synchronous. Synchronous means
319	that it might take a while until the signal gets handled by the process,	362	that it might take a while until the signal gets handled by the process,
320	but it is guaranteed not to interrupt any other callbacks.	363	but it is guaranteed not to interrupt any other callbacks.
321		364
322	The main advantage of using these watchers is that you can share a signal	365	The main advantage of using these watchers is that you can share a signal
323	between multiple watchers.	366	between multiple watchers, and AnyEvent will ensure that signals will not
		367	interrupt your program at bad times.
324		368
325	This watcher might use C<%SIG>, so programs overwriting those signals	369	This watcher might use C<%SIG> (depending on the event loop used),
326	directly will likely not work correctly.	370	so programs overwriting those signals directly will likely not work
		371	correctly.
		372
		373	Also note that many event loops (e.g. Glib, Tk, Qt, IO::Async) do not
		374	support attaching callbacks to signals, which is a pity, as you cannot do
		375	race-free signal handling in perl. AnyEvent will try to do it's best, but
		376	in some cases, signals will be delayed. The maximum time a signal might
		377	be delayed is specified in C<$AnyEvent::MAX_SIGNAL_LATENCY> (default: 10
		378	seconds). This variable can be changed only before the first signal
		379	watcher is created, and should be left alone otherwise. Higher values
		380	will cause fewer spurious wake-ups, which is better for power and CPU
		381	saving. All these problems can be avoided by installing the optional
		382	L<Async::Interrupt> module.
327		383
328	Example: exit on SIGINT	384	Example: exit on SIGINT
329		385
330	my $w = AnyEvent->signal (signal => "INT", cb => sub { exit 1 });	386	my $w = AnyEvent->signal (signal => "INT", cb => sub { exit 1 });
331		387
332	=head2 CHILD PROCESS WATCHERS	388	=head2 CHILD PROCESS WATCHERS
333		389
334	You can also watch on a child process exit and catch its exit status.	390	You can also watch on a child process exit and catch its exit status.
335		391
336	The child process is specified by the C<pid> argument (if set to C<0>, it	392	The child process is specified by the C<pid> argument (if set to C<0>, it
337	watches for any child process exit). The watcher will trigger as often	393	watches for any child process exit). The watcher will triggered only when
338	as status change for the child are received. This works by installing a	394	the child process has finished and an exit status is available, not on
339	signal handler for C<SIGCHLD>. The callback will be called with the pid	395	any trace events (stopped/continued).
340	and exit status (as returned by waitpid), so unlike other watcher types,	396
341	you I<can> rely on child watcher callback arguments.	397	The callback will be called with the pid and exit status (as returned by
		398	waitpid), so unlike other watcher types, you I<can> rely on child watcher
		399	callback arguments.
		400
		401	This watcher type works by installing a signal handler for C<SIGCHLD>,
		402	and since it cannot be shared, nothing else should use SIGCHLD or reap
		403	random child processes (waiting for specific child processes, e.g. inside
		404	C<system>, is just fine).
342		405
343	There is a slight catch to child watchers, however: you usually start them	406	There is a slight catch to child watchers, however: you usually start them
344	I<after> the child process was created, and this means the process could	407	I<after> the child process was created, and this means the process could
345	have exited already (and no SIGCHLD will be sent anymore).	408	have exited already (and no SIGCHLD will be sent anymore).
346		409
347	Not all event models handle this correctly (POE doesn't), but even for	410	Not all event models handle this correctly (neither POE nor IO::Async do,
		411	see their AnyEvent::Impl manpages for details), but even for event models
348	event models that I<do> handle this correctly, they usually need to be	412	that I<do> handle this correctly, they usually need to be loaded before
349	loaded before the process exits (i.e. before you fork in the first place).	413	the process exits (i.e. before you fork in the first place). AnyEvent's
		414	pure perl event loop handles all cases correctly regardless of when you
		415	start the watcher.
350		416
351	This means you cannot create a child watcher as the very first thing in an	417	This means you cannot create a child watcher as the very first
352	AnyEvent program, you I<have> to create at least one watcher before you	418	thing in an AnyEvent program, you I<have> to create at least one
353	C<fork> the child (alternatively, you can call C<AnyEvent::detect>).	419	watcher before you C<fork> the child (alternatively, you can call
		420	C<AnyEvent::detect>).
		421
		422	As most event loops do not support waiting for child events, they will be
		423	emulated by AnyEvent in most cases, in which the latency and race problems
		424	mentioned in the description of signal watchers apply.
354		425
355	Example: fork a process and wait for it	426	Example: fork a process and wait for it
356		427
357	my $done = AnyEvent->condvar;	428	my $done = AnyEvent->condvar;
358		429
…		…
368	);	439	);
369		440
370	# do something else, then wait for process exit	441	# do something else, then wait for process exit
371	$done->recv;	442	$done->recv;
372		443
		444	=head2 IDLE WATCHERS
		445
		446	Sometimes there is a need to do something, but it is not so important
		447	to do it instantly, but only when there is nothing better to do. This
		448	"nothing better to do" is usually defined to be "no other events need
		449	attention by the event loop".
		450
		451	Idle watchers ideally get invoked when the event loop has nothing
		452	better to do, just before it would block the process to wait for new
		453	events. Instead of blocking, the idle watcher is invoked.
		454
		455	Most event loops unfortunately do not really support idle watchers (only
		456	EV, Event and Glib do it in a usable fashion) - for the rest, AnyEvent
		457	will simply call the callback "from time to time".
		458
		459	Example: read lines from STDIN, but only process them when the
		460	program is otherwise idle:
		461
		462	my @lines; # read data
		463	my $idle_w;
		464	my $io_w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {
		465	push @lines, scalar <STDIN>;
		466
		467	# start an idle watcher, if not already done
		468	$idle_w ||= AnyEvent->idle (cb => sub {
		469	# handle only one line, when there are lines left
		470	if (my $line = shift @lines) {
		471	print "handled when idle: $line";
		472	} else {
		473	# otherwise disable the idle watcher again
		474	undef $idle_w;
		475	}
		476	});
		477	});
		478
373	=head2 CONDITION VARIABLES	479	=head2 CONDITION VARIABLES
374		480
375	If you are familiar with some event loops you will know that all of them	481	If you are familiar with some event loops you will know that all of them
376	require you to run some blocking "loop", "run" or similar function that	482	require you to run some blocking "loop", "run" or similar function that
377	will actively watch for new events and call your callbacks.	483	will actively watch for new events and call your callbacks.
378		484
379	AnyEvent is different, it expects somebody else to run the event loop and	485	AnyEvent is slightly different: it expects somebody else to run the event
380	will only block when necessary (usually when told by the user).	486	loop and will only block when necessary (usually when told by the user).
381		487
382	The instrument to do that is called a "condition variable", so called	488	The instrument to do that is called a "condition variable", so called
383	because they represent a condition that must become true.	489	because they represent a condition that must become true.
		490
		491	Now is probably a good time to look at the examples further below.
384		492
385	Condition variables can be created by calling the C<< AnyEvent->condvar	493	Condition variables can be created by calling the C<< AnyEvent->condvar
386	>> method, usually without arguments. The only argument pair allowed is	494	>> method, usually without arguments. The only argument pair allowed is
387	C<cb>, which specifies a callback to be called when the condition variable	495	C<cb>, which specifies a callback to be called when the condition variable
388	becomes true.	496	becomes true, with the condition variable as the first argument (but not
		497	the results).
389		498
390	After creation, the condition variable is "false" until it becomes "true"	499	After creation, the condition variable is "false" until it becomes "true"
391	by calling the C<send> method (or calling the condition variable as if it	500	by calling the C<send> method (or calling the condition variable as if it
392	were a callback, read about the caveats in the description for the C<<	501	were a callback, read about the caveats in the description for the C<<
393	->send >> method).	502	->send >> method).
…		…
439	after => 1,	548	after => 1,
440	cb => sub { $result_ready->send },	549	cb => sub { $result_ready->send },
441	);	550	);
442		551
443	# this "blocks" (while handling events) till the callback	552	# this "blocks" (while handling events) till the callback
444	# calls send	553	# calls -<send
445	$result_ready->recv;	554	$result_ready->recv;
446		555
447	Example: wait for a timer, but take advantage of the fact that	556	Example: wait for a timer, but take advantage of the fact that condition
448	condition variables are also code references.	557	variables are also callable directly.
449		558
450	my $done = AnyEvent->condvar;	559	my $done = AnyEvent->condvar;
451	my $delay = AnyEvent->timer (after => 5, cb => $done);	560	my $delay = AnyEvent->timer (after => 5, cb => $done);
452	$done->recv;	561	$done->recv;
		562
		563	Example: Imagine an API that returns a condvar and doesn't support
		564	callbacks. This is how you make a synchronous call, for example from
		565	the main program:
		566
		567	use AnyEvent::CouchDB;
		568
		569	...
		570
		571	my @info = $couchdb->info->recv;
		572
		573	And this is how you would just set a callback to be called whenever the
		574	results are available:
		575
		576	$couchdb->info->cb (sub {
		577	my @info = $_[0]->recv;
		578	});
453		579
454	=head3 METHODS FOR PRODUCERS	580	=head3 METHODS FOR PRODUCERS
455		581
456	These methods should only be used by the producing side, i.e. the	582	These methods should only be used by the producing side, i.e. the
457	code/module that eventually sends the signal. Note that it is also	583	code/module that eventually sends the signal. Note that it is also
…		…
470	immediately from within send.	596	immediately from within send.
471		597
472	Any arguments passed to the C<send> call will be returned by all	598	Any arguments passed to the C<send> call will be returned by all
473	future C<< ->recv >> calls.	599	future C<< ->recv >> calls.
474		600
475	Condition variables are overloaded so one can call them directly	601	Condition variables are overloaded so one can call them directly (as if
476	(as a code reference). Calling them directly is the same as calling	602	they were a code reference). Calling them directly is the same as calling
477	C<send>. Note, however, that many C-based event loops do not handle	603	C<send>.
478	overloading, so as tempting as it may be, passing a condition variable
479	instead of a callback does not work. Both the pure perl and EV loops
480	support overloading, however, as well as all functions that use perl to
481	invoke a callback (as in L<AnyEvent::Socket> and L<AnyEvent::DNS> for
482	example).
483		604
484	=item $cv->croak ($error)	605	=item $cv->croak ($error)
485		606
486	Similar to send, but causes all call's to C<< ->recv >> to invoke	607	Similar to send, but causes all call's to C<< ->recv >> to invoke
487	C<Carp::croak> with the given error message/object/scalar.	608	C<Carp::croak> with the given error message/object/scalar.
488		609
489	This can be used to signal any errors to the condition variable	610	This can be used to signal any errors to the condition variable
490	user/consumer.	611	user/consumer. Doing it this way instead of calling C<croak> directly
		612	delays the error detetcion, but has the overwhelmign advantage that it
		613	diagnoses the error at the place where the result is expected, and not
		614	deep in some event clalback without connection to the actual code causing
		615	the problem.
491		616
492	=item $cv->begin ([group callback])	617	=item $cv->begin ([group callback])
493		618
494	=item $cv->end	619	=item $cv->end
495
496	These two methods are EXPERIMENTAL and MIGHT CHANGE.
497		620
498	These two methods can be used to combine many transactions/events into	621	These two methods can be used to combine many transactions/events into
499	one. For example, a function that pings many hosts in parallel might want	622	one. For example, a function that pings many hosts in parallel might want
500	to use a condition variable for the whole process.	623	to use a condition variable for the whole process.
501		624
…		…
503	C<< ->end >> will decrement it. If the counter reaches C<0> in C<< ->end	626	C<< ->end >> will decrement it. If the counter reaches C<0> in C<< ->end
504	>>, the (last) callback passed to C<begin> will be executed. That callback	627	>>, the (last) callback passed to C<begin> will be executed. That callback
505	is I<supposed> to call C<< ->send >>, but that is not required. If no	628	is I<supposed> to call C<< ->send >>, but that is not required. If no
506	callback was set, C<send> will be called without any arguments.	629	callback was set, C<send> will be called without any arguments.
507		630
508	Let's clarify this with the ping example:	631	You can think of C<< $cv->send >> giving you an OR condition (one call
		632	sends), while C<< $cv->begin >> and C<< $cv->end >> giving you an AND
		633	condition (all C<begin> calls must be C<end>'ed before the condvar sends).
		634
		635	Let's start with a simple example: you have two I/O watchers (for example,
		636	STDOUT and STDERR for a program), and you want to wait for both streams to
		637	close before activating a condvar:
		638
		639	my $cv = AnyEvent->condvar;
		640
		641	$cv->begin; # first watcher
		642	my $w1 = AnyEvent->io (fh => $fh1, cb => sub {
		643	defined sysread $fh1, my $buf, 4096
		644	or $cv->end;
		645	});
		646
		647	$cv->begin; # second watcher
		648	my $w2 = AnyEvent->io (fh => $fh2, cb => sub {
		649	defined sysread $fh2, my $buf, 4096
		650	or $cv->end;
		651	});
		652
		653	$cv->recv;
		654
		655	This works because for every event source (EOF on file handle), there is
		656	one call to C<begin>, so the condvar waits for all calls to C<end> before
		657	sending.
		658
		659	The ping example mentioned above is slightly more complicated, as the
		660	there are results to be passwd back, and the number of tasks that are
		661	begung can potentially be zero:
509		662
510	my $cv = AnyEvent->condvar;	663	my $cv = AnyEvent->condvar;
511		664
512	my %result;	665	my %result;
513	$cv->begin (sub { $cv->send (\%result) });	666	$cv->begin (sub { $cv->send (\%result) });
…		…
533	loop, which serves two important purposes: first, it sets the callback	686	loop, which serves two important purposes: first, it sets the callback
534	to be called once the counter reaches C<0>, and second, it ensures that	687	to be called once the counter reaches C<0>, and second, it ensures that
535	C<send> is called even when C<no> hosts are being pinged (the loop	688	C<send> is called even when C<no> hosts are being pinged (the loop
536	doesn't execute once).	689	doesn't execute once).
537		690
538	This is the general pattern when you "fan out" into multiple subrequests:	691	This is the general pattern when you "fan out" into multiple (but
539	use an outer C<begin>/C<end> pair to set the callback and ensure C<end>	692	potentially none) subrequests: use an outer C<begin>/C<end> pair to set
540	is called at least once, and then, for each subrequest you start, call	693	the callback and ensure C<end> is called at least once, and then, for each
541	C<begin> and for each subrequest you finish, call C<end>.	694	subrequest you start, call C<begin> and for each subrequest you finish,
		695	call C<end>.
542		696
543	=back	697	=back
544		698
545	=head3 METHODS FOR CONSUMERS	699	=head3 METHODS FOR CONSUMERS
546		700
…		…
562	function will call C<croak>.	716	function will call C<croak>.
563		717
564	In list context, all parameters passed to C<send> will be returned,	718	In list context, all parameters passed to C<send> will be returned,
565	in scalar context only the first one will be returned.	719	in scalar context only the first one will be returned.
566		720
		721	Note that doing a blocking wait in a callback is not supported by any
		722	event loop, that is, recursive invocation of a blocking C<< ->recv
		723	>> is not allowed, and the C<recv> call will C<croak> if such a
		724	condition is detected. This condition can be slightly loosened by using
		725	L<Coro::AnyEvent>, which allows you to do a blocking C<< ->recv >> from
		726	any thread that doesn't run the event loop itself.
		727
567	Not all event models support a blocking wait - some die in that case	728	Not all event models support a blocking wait - some die in that case
568	(programs might want to do that to stay interactive), so I<if you are	729	(programs might want to do that to stay interactive), so I<if you are
569	using this from a module, never require a blocking wait>, but let the	730	using this from a module, never require a blocking wait>. Instead, let the
570	caller decide whether the call will block or not (for example, by coupling	731	caller decide whether the call will block or not (for example, by coupling
571	condition variables with some kind of request results and supporting	732	condition variables with some kind of request results and supporting
572	callbacks so the caller knows that getting the result will not block,	733	callbacks so the caller knows that getting the result will not block,
573	while still supporting blocking waits if the caller so desires).	734	while still supporting blocking waits if the caller so desires).
574		735
575	Another reason I<never> to C<< ->recv >> in a module is that you cannot
576	sensibly have two C<< ->recv >>'s in parallel, as that would require
577	multiple interpreters or coroutines/threads, none of which C<AnyEvent>
578	can supply.
579
580	The L<Coro> module, however, I<can> and I<does> supply coroutines and, in
581	fact, L<Coro::AnyEvent> replaces AnyEvent's condvars by coroutine-safe
582	versions and also integrates coroutines into AnyEvent, making blocking
583	C<< ->recv >> calls perfectly safe as long as they are done from another
584	coroutine (one that doesn't run the event loop).
585
586	You can ensure that C<< -recv >> never blocks by setting a callback and	736	You can ensure that C<< -recv >> never blocks by setting a callback and
587	only calling C<< ->recv >> from within that callback (or at a later	737	only calling C<< ->recv >> from within that callback (or at a later
588	time). This will work even when the event loop does not support blocking	738	time). This will work even when the event loop does not support blocking
589	waits otherwise.	739	waits otherwise.
590		740
591	=item $bool = $cv->ready	741	=item $bool = $cv->ready
592		742
593	Returns true when the condition is "true", i.e. whether C<send> or	743	Returns true when the condition is "true", i.e. whether C<send> or
594	C<croak> have been called.	744	C<croak> have been called.
595		745
596	=item $cb = $cv->cb ([new callback])	746	=item $cb = $cv->cb ($cb->($cv))
597		747
598	This is a mutator function that returns the callback set and optionally	748	This is a mutator function that returns the callback set and optionally
599	replaces it before doing so.	749	replaces it before doing so.
600		750
601	The callback will be called when the condition becomes "true", i.e. when	751	The callback will be called when the condition becomes "true", i.e. when
…		…
603	variable itself. Calling C<recv> inside the callback or at any later time	753	variable itself. Calling C<recv> inside the callback or at any later time
604	is guaranteed not to block.	754	is guaranteed not to block.
605		755
606	=back	756	=back
607		757
		758	=head1 SUPPORTED EVENT LOOPS/BACKENDS
		759
		760	The available backend classes are (every class has its own manpage):
		761
		762	=over 4
		763
		764	=item Backends that are autoprobed when no other event loop can be found.
		765
		766	EV is the preferred backend when no other event loop seems to be in
		767	use. If EV is not installed, then AnyEvent will try Event, and, failing
		768	that, will fall back to its own pure-perl implementation, which is
		769	available everywhere as it comes with AnyEvent itself.
		770
		771	AnyEvent::Impl::EV based on EV (interface to libev, best choice).
		772	AnyEvent::Impl::Event based on Event, very stable, few glitches.
		773	AnyEvent::Impl::Perl pure-perl implementation, fast and portable.
		774
		775	=item Backends that are transparently being picked up when they are used.
		776
		777	These will be used when they are currently loaded when the first watcher
		778	is created, in which case it is assumed that the application is using
		779	them. This means that AnyEvent will automatically pick the right backend
		780	when the main program loads an event module before anything starts to
		781	create watchers. Nothing special needs to be done by the main program.
		782
		783	AnyEvent::Impl::Glib based on Glib, slow but very stable.
		784	AnyEvent::Impl::Tk based on Tk, very broken.
		785	AnyEvent::Impl::EventLib based on Event::Lib, leaks memory and worse.
		786	AnyEvent::Impl::POE based on POE, very slow, some limitations.
		787
		788	=item Backends with special needs.
		789
		790	Qt requires the Qt::Application to be instantiated first, but will
		791	otherwise be picked up automatically. As long as the main program
		792	instantiates the application before any AnyEvent watchers are created,
		793	everything should just work.
		794
		795	AnyEvent::Impl::Qt based on Qt.
		796
		797	Support for IO::Async can only be partial, as it is too broken and
		798	architecturally limited to even support the AnyEvent API. It also
		799	is the only event loop that needs the loop to be set explicitly, so
		800	it can only be used by a main program knowing about AnyEvent. See
		801	L<AnyEvent::Impl::Async> for the gory details.
		802
		803	AnyEvent::Impl::IOAsync based on IO::Async, cannot be autoprobed.
		804
		805	=item Event loops that are indirectly supported via other backends.
		806
		807	Some event loops can be supported via other modules:
		808
		809	There is no direct support for WxWidgets (L<Wx>) or L<Prima>.
		810
		811	B<WxWidgets> has no support for watching file handles. However, you can
		812	use WxWidgets through the POE adaptor, as POE has a Wx backend that simply
		813	polls 20 times per second, which was considered to be too horrible to even
		814	consider for AnyEvent.
		815
		816	B<Prima> is not supported as nobody seems to be using it, but it has a POE
		817	backend, so it can be supported through POE.
		818
		819	AnyEvent knows about both L<Prima> and L<Wx>, however, and will try to
		820	load L<POE> when detecting them, in the hope that POE will pick them up,
		821	in which case everything will be automatic.
		822
		823	=back
		824
608	=head1 GLOBAL VARIABLES AND FUNCTIONS	825	=head1 GLOBAL VARIABLES AND FUNCTIONS
609		826
		827	These are not normally required to use AnyEvent, but can be useful to
		828	write AnyEvent extension modules.
		829
610	=over 4	830	=over 4
611		831
612	=item $AnyEvent::MODEL	832	=item $AnyEvent::MODEL
613		833
614	Contains C<undef> until the first watcher is being created. Then it	834	Contains C<undef> until the first watcher is being created, before the
		835	backend has been autodetected.
		836
615	contains the event model that is being used, which is the name of the	837	Afterwards it contains the event model that is being used, which is the
616	Perl class implementing the model. This class is usually one of the	838	name of the Perl class implementing the model. This class is usually one
617	C<AnyEvent::Impl:xxx> modules, but can be any other class in the case	839	of the C<AnyEvent::Impl:xxx> modules, but can be any other class in the
618	AnyEvent has been extended at runtime (e.g. in I<rxvt-unicode>).	840	case AnyEvent has been extended at runtime (e.g. in I<rxvt-unicode> it
619		841	will be C<urxvt::anyevent>).
620	The known classes so far are:
621
622	AnyEvent::Impl::EV based on EV (an interface to libev, best choice).
623	AnyEvent::Impl::Event based on Event, second best choice.
624	AnyEvent::Impl::Perl pure-perl implementation, fast and portable.
625	AnyEvent::Impl::Glib based on Glib, third-best choice.
626	AnyEvent::Impl::Tk based on Tk, very bad choice.
627	AnyEvent::Impl::Qt based on Qt, cannot be autoprobed (see its docs).
628	AnyEvent::Impl::EventLib based on Event::Lib, leaks memory and worse.
629	AnyEvent::Impl::POE based on POE, not generic enough for full support.
630
631	There is no support for WxWidgets, as WxWidgets has no support for
632	watching file handles. However, you can use WxWidgets through the
633	POE Adaptor, as POE has a Wx backend that simply polls 20 times per
634	second, which was considered to be too horrible to even consider for
635	AnyEvent. Likewise, other POE backends can be used by AnyEvent by using
636	it's adaptor.
637
638	AnyEvent knows about L<Prima> and L<Wx> and will try to use L<POE> when
639	autodetecting them.
640		842
641	=item AnyEvent::detect	843	=item AnyEvent::detect
642		844
643	Returns C<$AnyEvent::MODEL>, forcing autodetection of the event model	845	Returns C<$AnyEvent::MODEL>, forcing autodetection of the event model
644	if necessary. You should only call this function right before you would	846	if necessary. You should only call this function right before you would
645	have created an AnyEvent watcher anyway, that is, as late as possible at	847	have created an AnyEvent watcher anyway, that is, as late as possible at
646	runtime.	848	runtime, and not e.g. while initialising of your module.
		849
		850	If you need to do some initialisation before AnyEvent watchers are
		851	created, use C<post_detect>.
647		852
648	=item $guard = AnyEvent::post_detect { BLOCK }	853	=item $guard = AnyEvent::post_detect { BLOCK }
649		854
650	Arranges for the code block to be executed as soon as the event model is	855	Arranges for the code block to be executed as soon as the event model is
651	autodetected (or immediately if this has already happened).	856	autodetected (or immediately if this has already happened).
		857
		858	The block will be executed I<after> the actual backend has been detected
		859	(C<$AnyEvent::MODEL> is set), but I<before> any watchers have been
		860	created, so it is possible to e.g. patch C<@AnyEvent::ISA> or do
		861	other initialisations - see the sources of L<AnyEvent::Strict> or
		862	L<AnyEvent::AIO> to see how this is used.
		863
		864	The most common usage is to create some global watchers, without forcing
		865	event module detection too early, for example, L<AnyEvent::AIO> creates
		866	and installs the global L<IO::AIO> watcher in a C<post_detect> block to
		867	avoid autodetecting the event module at load time.
652		868
653	If called in scalar or list context, then it creates and returns an object	869	If called in scalar or list context, then it creates and returns an object
654	that automatically removes the callback again when it is destroyed. See	870	that automatically removes the callback again when it is destroyed. See
655	L<Coro::BDB> for a case where this is useful.	871	L<Coro::BDB> for a case where this is useful.
656		872
…		…
659	If there are any code references in this array (you can C<push> to it	875	If there are any code references in this array (you can C<push> to it
660	before or after loading AnyEvent), then they will called directly after	876	before or after loading AnyEvent), then they will called directly after
661	the event loop has been chosen.	877	the event loop has been chosen.
662		878
663	You should check C<$AnyEvent::MODEL> before adding to this array, though:	879	You should check C<$AnyEvent::MODEL> before adding to this array, though:
664	if it contains a true value then the event loop has already been detected,	880	if it is defined then the event loop has already been detected, and the
665	and the array will be ignored.	881	array will be ignored.
666		882
667	Best use C<AnyEvent::post_detect { BLOCK }> instead.	883	Best use C<AnyEvent::post_detect { BLOCK }> when your application allows
		884	it,as it takes care of these details.
		885
		886	This variable is mainly useful for modules that can do something useful
		887	when AnyEvent is used and thus want to know when it is initialised, but do
		888	not need to even load it by default. This array provides the means to hook
		889	into AnyEvent passively, without loading it.
668		890
669	=back	891	=back
670		892
671	=head1 WHAT TO DO IN A MODULE	893	=head1 WHAT TO DO IN A MODULE
672		894
…		…
727		949
728		950
729	=head1 OTHER MODULES	951	=head1 OTHER MODULES
730		952
731	The following is a non-exhaustive list of additional modules that use	953	The following is a non-exhaustive list of additional modules that use
732	AnyEvent and can therefore be mixed easily with other AnyEvent modules	954	AnyEvent as a client and can therefore be mixed easily with other AnyEvent
733	in the same program. Some of the modules come with AnyEvent, some are	955	modules and other event loops in the same program. Some of the modules
734	available via CPAN.	956	come with AnyEvent, most are available via CPAN.
735		957
736	=over 4	958	=over 4
737		959
738	=item L<AnyEvent::Util>	960	=item L<AnyEvent::Util>
739		961
740	Contains various utility functions that replace often-used but blocking	962	Contains various utility functions that replace often-used but blocking
741	functions such as C<inet_aton> by event-/callback-based versions.	963	functions such as C<inet_aton> by event-/callback-based versions.
742
743	=item L<AnyEvent::Handle>
744
745	Provide read and write buffers and manages watchers for reads and writes.
746		964
747	=item L<AnyEvent::Socket>	965	=item L<AnyEvent::Socket>
748		966
749	Provides various utility functions for (internet protocol) sockets,	967	Provides various utility functions for (internet protocol) sockets,
750	addresses and name resolution. Also functions to create non-blocking tcp	968	addresses and name resolution. Also functions to create non-blocking tcp
751	connections or tcp servers, with IPv6 and SRV record support and more.	969	connections or tcp servers, with IPv6 and SRV record support and more.
752		970
		971	=item L<AnyEvent::Handle>
		972
		973	Provide read and write buffers, manages watchers for reads and writes,
		974	supports raw and formatted I/O, I/O queued and fully transparent and
		975	non-blocking SSL/TLS (via L<AnyEvent::TLS>.
		976
753	=item L<AnyEvent::DNS>	977	=item L<AnyEvent::DNS>
754		978
755	Provides rich asynchronous DNS resolver capabilities.	979	Provides rich asynchronous DNS resolver capabilities.
756		980
757	=item L<AnyEvent::HTTP>	981	=item L<AnyEvent::HTTP>
…		…
767		991
768	The fastest ping in the west.	992	The fastest ping in the west.
769		993
770	=item L<AnyEvent::DBI>	994	=item L<AnyEvent::DBI>
771		995
772	Executes DBI requests asynchronously in a proxy process.	996	Executes L<DBI> requests asynchronously in a proxy process.
773		997
		998	=item L<AnyEvent::AIO>
		999
		1000	Truly asynchronous I/O, should be in the toolbox of every event
		1001	programmer. AnyEvent::AIO transparently fuses L<IO::AIO> and AnyEvent
		1002	together.
		1003
		1004	=item L<AnyEvent::BDB>
		1005
		1006	Truly asynchronous Berkeley DB access. AnyEvent::BDB transparently fuses
		1007	L<BDB> and AnyEvent together.
		1008
		1009	=item L<AnyEvent::GPSD>
		1010
		1011	A non-blocking interface to gpsd, a daemon delivering GPS information.
		1012
774	=item L<Net::IRC3>	1013	=item L<AnyEvent::IRC>
775		1014
776	AnyEvent based IRC client module family.	1015	AnyEvent based IRC client module family (replacing the older Net::IRC3).
777		1016
778	=item L<Net::XMPP2>	1017	=item L<AnyEvent::XMPP>
779		1018
780	AnyEvent based XMPP (Jabber protocol) module family.	1019	AnyEvent based XMPP (Jabber protocol) module family (replacing the older
		1020	Net::XMPP2>.
		1021
		1022	=item L<AnyEvent::IGS>
		1023
		1024	A non-blocking interface to the Internet Go Server protocol (used by
		1025	L<App::IGS>).
781		1026
782	=item L<Net::FCP>	1027	=item L<Net::FCP>
783		1028
784	AnyEvent-based implementation of the Freenet Client Protocol, birthplace	1029	AnyEvent-based implementation of the Freenet Client Protocol, birthplace
785	of AnyEvent.	1030	of AnyEvent.
…		…
790		1035
791	=item L<Coro>	1036	=item L<Coro>
792		1037
793	Has special support for AnyEvent via L<Coro::AnyEvent>.	1038	Has special support for AnyEvent via L<Coro::AnyEvent>.
794		1039
795	=item L<AnyEvent::AIO>, L<IO::AIO>
796
797	Truly asynchronous I/O, should be in the toolbox of every event
798	programmer. AnyEvent::AIO transparently fuses IO::AIO and AnyEvent
799	together.
800
801	=item L<AnyEvent::BDB>, L<BDB>
802
803	Truly asynchronous Berkeley DB access. AnyEvent::AIO transparently fuses
804	IO::AIO and AnyEvent together.
805
806	=item L<IO::Lambda>
807
808	The lambda approach to I/O - don't ask, look there. Can use AnyEvent.
809
810	=back	1040	=back
811		1041
812	=cut	1042	=cut
813		1043
814	package AnyEvent;	1044	package AnyEvent;
815		1045
		1046	# basically a tuned-down version of common::sense
		1047	sub common_sense {
816	no warnings;	1048	# no warnings
817	use strict;	1049	${^WARNING_BITS} ^= ${^WARNING_BITS};
		1050	# use strict vars subs
		1051	$^H |= 0x00000600;
		1052	}
818		1053
		1054	BEGIN { AnyEvent::common_sense }
		1055
819	use Carp;	1056	use Carp ();
820		1057
821	our $VERSION = 4.151;	1058	our $VERSION = 4.85;
822	our $MODEL;	1059	our $MODEL;
823		1060
824	our $AUTOLOAD;	1061	our $AUTOLOAD;
825	our @ISA;	1062	our @ISA;
826		1063
827	our @REGISTRY;	1064	our @REGISTRY;
828		1065
829	our $WIN32;	1066	our $WIN32;
830		1067
		1068	our $VERBOSE;
		1069
831	BEGIN {	1070	BEGIN {
832	my $win32 = ! ! ($^O =~ /mswin32/i);	1071	eval "sub WIN32(){ " . (($^O =~ /mswin32/i)*1) ." }";
833	eval "sub WIN32(){ $win32 }";	1072	eval "sub TAINT(){ " . (${^TAINT}*1) . " }";
834	}
835		1073
		1074	delete @ENV{grep /^PERL_ANYEVENT_/, keys %ENV}
		1075	if ${^TAINT};
		1076
836	our $verbose = $ENV{PERL_ANYEVENT_VERBOSE}*1;	1077	$VERBOSE = $ENV{PERL_ANYEVENT_VERBOSE}*1;
		1078
		1079	}
		1080
		1081	our $MAX_SIGNAL_LATENCY = 10;
837		1082
838	our %PROTOCOL; # (ipv4|ipv6) => (1|2), higher numbers are preferred	1083	our %PROTOCOL; # (ipv4|ipv6) => (1|2), higher numbers are preferred
839		1084
840	{	1085	{
841	my $idx;	1086	my $idx;
…		…
849	[Event:: => AnyEvent::Impl::Event::],	1094	[Event:: => AnyEvent::Impl::Event::],
850	[AnyEvent::Impl::Perl:: => AnyEvent::Impl::Perl::],	1095	[AnyEvent::Impl::Perl:: => AnyEvent::Impl::Perl::],
851	# everything below here will not be autoprobed	1096	# everything below here will not be autoprobed
852	# as the pureperl backend should work everywhere	1097	# as the pureperl backend should work everywhere
853	# and is usually faster	1098	# and is usually faster
854	[Tk:: => AnyEvent::Impl::Tk::], # crashes with many handles
855	[Glib:: => AnyEvent::Impl::Glib::], # becomes extremely slow with many watchers	1099	[Glib:: => AnyEvent::Impl::Glib::], # becomes extremely slow with many watchers
856	[Event::Lib:: => AnyEvent::Impl::EventLib::], # too buggy	1100	[Event::Lib:: => AnyEvent::Impl::EventLib::], # too buggy
		1101	[Tk:: => AnyEvent::Impl::Tk::], # crashes with many handles
857	[Qt:: => AnyEvent::Impl::Qt::], # requires special main program	1102	[Qt:: => AnyEvent::Impl::Qt::], # requires special main program
858	[POE::Kernel:: => AnyEvent::Impl::POE::], # lasciate ogni speranza	1103	[POE::Kernel:: => AnyEvent::Impl::POE::], # lasciate ogni speranza
859	[Wx:: => AnyEvent::Impl::POE::],	1104	[Wx:: => AnyEvent::Impl::POE::],
860	[Prima:: => AnyEvent::Impl::POE::],	1105	[Prima:: => AnyEvent::Impl::POE::],
		1106	# IO::Async is just too broken - we would need workarounds for its
		1107	# byzantine signal and broken child handling, among others.
		1108	# IO::Async is rather hard to detect, as it doesn't have any
		1109	# obvious default class.
		1110	# [IO::Async:: => AnyEvent::Impl::IOAsync::], # requires special main program
		1111	# [IO::Async::Loop:: => AnyEvent::Impl::IOAsync::], # requires special main program
		1112	# [IO::Async::Notifier:: => AnyEvent::Impl::IOAsync::], # requires special main program
861	);	1113	);
862		1114
863	our %method = map +($_ => 1), qw(io timer time now signal child condvar one_event DESTROY);	1115	our %method = map +($_ => 1),
		1116	qw(io timer time now now_update signal child idle condvar one_event DESTROY);
864		1117
865	our @post_detect;	1118	our @post_detect;
866		1119
867	sub post_detect(&) {	1120	sub post_detect(&) {
868	my ($cb) = @_;	1121	my ($cb) = @_;
…		…
873	1	1126	1
874	} else {	1127	} else {
875	push @post_detect, $cb;	1128	push @post_detect, $cb;
876		1129
877	defined wantarray	1130	defined wantarray
878	? bless \$cb, "AnyEvent::Util::PostDetect"	1131	? bless \$cb, "AnyEvent::Util::postdetect"
879	: ()	1132	: ()
880	}	1133	}
881	}	1134	}
882		1135
883	sub AnyEvent::Util::PostDetect::DESTROY {	1136	sub AnyEvent::Util::postdetect::DESTROY {
884	@post_detect = grep $_ != ${$_[0]}, @post_detect;	1137	@post_detect = grep $_ != ${$_[0]}, @post_detect;
885	}	1138	}
886		1139
887	sub detect() {	1140	sub detect() {
888	unless ($MODEL) {	1141	unless ($MODEL) {
889	no strict 'refs';
890	local $SIG{__DIE__};	1142	local $SIG{__DIE__};
891		1143
892	if ($ENV{PERL_ANYEVENT_MODEL} =~ /^([a-zA-Z]+)$/) {	1144	if ($ENV{PERL_ANYEVENT_MODEL} =~ /^([a-zA-Z]+)$/) {
893	my $model = "AnyEvent::Impl::$1";	1145	my $model = "AnyEvent::Impl::$1";
894	if (eval "require $model") {	1146	if (eval "require $model") {
895	$MODEL = $model;	1147	$MODEL = $model;
896	warn "AnyEvent: loaded model '$model' (forced by \$PERL_ANYEVENT_MODEL), using it.\n" if $verbose > 1;	1148	warn "AnyEvent: loaded model '$model' (forced by \$ENV{PERL_ANYEVENT_MODEL}), using it.\n" if $VERBOSE >= 2;
897	} else {	1149	} else {
898	warn "AnyEvent: unable to load model '$model' (from \$PERL_ANYEVENT_MODEL):\n$@" if $verbose;	1150	warn "AnyEvent: unable to load model '$model' (from \$ENV{PERL_ANYEVENT_MODEL}):\n$@" if $VERBOSE;
899	}	1151	}
900	}	1152	}
901		1153
902	# check for already loaded models	1154	# check for already loaded models
903	unless ($MODEL) {	1155	unless ($MODEL) {
904	for (@REGISTRY, @models) {	1156	for (@REGISTRY, @models) {
905	my ($package, $model) = @$_;	1157	my ($package, $model) = @$_;
906	if (${"$package\::VERSION"} > 0) {	1158	if (${"$package\::VERSION"} > 0) {
907	if (eval "require $model") {	1159	if (eval "require $model") {
908	$MODEL = $model;	1160	$MODEL = $model;
909	warn "AnyEvent: autodetected model '$model', using it.\n" if $verbose > 1;	1161	warn "AnyEvent: autodetected model '$model', using it.\n" if $VERBOSE >= 2;
910	last;	1162	last;
911	}	1163	}
912	}	1164	}
913	}	1165	}
914		1166
…		…
919	my ($package, $model) = @$_;	1171	my ($package, $model) = @$_;
920	if (eval "require $package"	1172	if (eval "require $package"
921	and ${"$package\::VERSION"} > 0	1173	and ${"$package\::VERSION"} > 0
922	and eval "require $model") {	1174	and eval "require $model") {
923	$MODEL = $model;	1175	$MODEL = $model;
924	warn "AnyEvent: autoprobed model '$model', using it.\n" if $verbose > 1;	1176	warn "AnyEvent: autoprobed model '$model', using it.\n" if $VERBOSE >= 2;
925	last;	1177	last;
926	}	1178	}
927	}	1179	}
928		1180
929	$MODEL	1181	$MODEL
930	or die "No event module selected for AnyEvent and autodetect failed. Install any one of these modules: EV, Event or Glib.";	1182	or die "No event module selected for AnyEvent and autodetect failed. Install any one of these modules: EV, Event or Glib.\n";
931	}	1183	}
932	}	1184	}
933		1185
		1186	push @{"$MODEL\::ISA"}, "AnyEvent::Base";
		1187
934	unshift @ISA, $MODEL;	1188	unshift @ISA, $MODEL;
935	push @{"$MODEL\::ISA"}, "AnyEvent::Base";	1189
		1190	require AnyEvent::Strict if $ENV{PERL_ANYEVENT_STRICT};
936		1191
937	(shift @post_detect)->() while @post_detect;	1192	(shift @post_detect)->() while @post_detect;
938	}	1193	}
939		1194
940	$MODEL	1195	$MODEL
…		…
942		1197
943	sub AUTOLOAD {	1198	sub AUTOLOAD {
944	(my $func = $AUTOLOAD) =~ s/.*://;	1199	(my $func = $AUTOLOAD) =~ s/.*://;
945		1200
946	$method{$func}	1201	$method{$func}
947	or croak "$func: not a valid method for AnyEvent objects";	1202	or Carp::croak "$func: not a valid method for AnyEvent objects";
948		1203
949	detect unless $MODEL;	1204	detect unless $MODEL;
950		1205
951	my $class = shift;	1206	my $class = shift;
952	$class->$func (@_);	1207	$class->$func (@_);
953	}	1208	}
954		1209
		1210	# utility function to dup a filehandle. this is used by many backends
		1211	# to support binding more than one watcher per filehandle (they usually
		1212	# allow only one watcher per fd, so we dup it to get a different one).
		1213	sub _dupfh($$;$$) {
		1214	my ($poll, $fh, $r, $w) = @_;
		1215
		1216	# cygwin requires the fh mode to be matching, unix doesn't
		1217	my ($rw, $mode) = $poll eq "r" ? ($r, "<&") : ($w, ">&");
		1218
		1219	open my $fh2, $mode, $fh
		1220	or die "AnyEvent->io: cannot dup() filehandle in mode '$poll': $!,";
		1221
		1222	# we assume CLOEXEC is already set by perl in all important cases
		1223
		1224	($fh2, $rw)
		1225	}
		1226
955	package AnyEvent::Base;	1227	package AnyEvent::Base;
956		1228
957	# default implementation for now and time	1229	# default implementations for many methods
958		1230
959	use Time::HiRes ();	1231	sub _time {
		1232	# probe for availability of Time::HiRes
		1233	if (eval "use Time::HiRes (); Time::HiRes::time (); 1") {
		1234	warn "AnyEvent: using Time::HiRes for sub-second timing accuracy.\n" if $VERBOSE >= 8;
		1235	*_time = \&Time::HiRes::time;
		1236	# if (eval "use POSIX (); (POSIX::times())...
		1237	} else {
		1238	warn "AnyEvent: using built-in time(), WARNING, no sub-second resolution!\n" if $VERBOSE;
		1239	*_time = sub { time }; # epic fail
		1240	}
960		1241
961	sub time { Time::HiRes::time }	1242	&_time
962	sub now { Time::HiRes::time }	1243	}
		1244
		1245	sub time { _time }
		1246	sub now { _time }
		1247	sub now_update { }
963		1248
964	# default implementation for ->condvar	1249	# default implementation for ->condvar
965		1250
966	sub condvar {	1251	sub condvar {
967	bless { @_ == 3 ? (_ae_cb => $_[2]) : () }, AnyEvent::CondVar::	1252	bless { @_ == 3 ? (_ae_cb => $_[2]) : () }, "AnyEvent::CondVar"
968	}	1253	}
969		1254
970	# default implementation for ->signal	1255	# default implementation for ->signal
971		1256
972	our %SIG_CB;	1257	our $HAVE_ASYNC_INTERRUPT;
		1258	our ($SIGPIPE_R, $SIGPIPE_W, %SIG_CB, %SIG_EV, $SIG_IO);
		1259	our (%SIG_ASY, %SIG_ASY_W);
		1260	our ($SIG_COUNT, $SIG_TW);
973		1261
		1262	sub _signal_exec {
		1263	$HAVE_ASYNC_INTERRUPT
		1264	? $SIGPIPE_R->drain
		1265	: sysread $SIGPIPE_R, my $dummy, 9;
		1266
		1267	while (%SIG_EV) {
		1268	for (keys %SIG_EV) {
		1269	delete $SIG_EV{$_};
		1270	$_->() for values %{ $SIG_CB{$_} || {} };
		1271	}
		1272	}
		1273	}
		1274
974	sub signal {	1275	sub _signal {
975	my (undef, %arg) = @_;	1276	my (undef, %arg) = @_;
976		1277
977	my $signal = uc $arg{signal}	1278	my $signal = uc $arg{signal}
978	or Carp::croak "required option 'signal' is missing";	1279	or Carp::croak "required option 'signal' is missing";
979		1280
980	$SIG_CB{$signal}{$arg{cb}} = $arg{cb};	1281	$SIG_CB{$signal}{$arg{cb}} = $arg{cb};
		1282
		1283	if ($HAVE_ASYNC_INTERRUPT) {
		1284	# async::interrupt
		1285
		1286	$SIG_ASY{$signal} ||= do {
		1287	my $asy = new Async::Interrupt
		1288	cb => sub { undef $SIG_EV{$signal} },
		1289	signal => $signal,
		1290	pipe => [$SIGPIPE_R->filenos],
		1291	;
		1292	$asy->pipe_autodrain (0);
		1293
		1294	$asy
		1295	};
		1296
		1297	} else {
		1298	# pure perl
		1299
981	$SIG{$signal} ||= sub {	1300	$SIG{$signal} ||= sub {
982	$_->() for values %{ $SIG_CB{$signal} || {} };	1301	local $!;
		1302	syswrite $SIGPIPE_W, "\x00", 1 unless %SIG_EV;
		1303	undef $SIG_EV{$signal};
		1304	};
		1305
		1306	# can't do signal processing without introducing races in pure perl,
		1307	# so limit the signal latency.
		1308	++$SIG_COUNT;
		1309	$SIG_TW ||= AnyEvent->timer (
		1310	after => $MAX_SIGNAL_LATENCY,
		1311	interval => $MAX_SIGNAL_LATENCY,
		1312	cb => sub { }, # just for the PERL_ASYNC_CHECK
		1313	);
983	};	1314	}
984		1315
985	bless [$signal, $arg{cb}], "AnyEvent::Base::Signal"	1316	bless [$signal, $arg{cb}], "AnyEvent::Base::signal"
986	}	1317	}
987		1318
		1319	sub signal {
		1320	# probe for availability of Async::Interrupt
		1321	if (!$ENV{PERL_ANYEVENT_AVOID_ASYNC_INTERRUPT} && eval "use Async::Interrupt 0.6 (); 1") {
		1322	warn "AnyEvent: using Async::Interrupt for race-free signal handling.\n" if $VERBOSE >= 8;
		1323
		1324	$HAVE_ASYNC_INTERRUPT = 1;
		1325	$SIGPIPE_R = new Async::Interrupt::EventPipe;
		1326	$SIG_IO = AnyEvent->io (fh => $SIGPIPE_R->fileno, poll => "r", cb => \&_signal_exec);
		1327
		1328	} else {
		1329	warn "AnyEvent: using emulated perl signal handling with latency timer.\n" if $VERBOSE >= 8;
		1330
		1331	require Fcntl;
		1332
		1333	if (AnyEvent::WIN32) {
		1334	require AnyEvent::Util;
		1335
		1336	($SIGPIPE_R, $SIGPIPE_W) = AnyEvent::Util::portable_pipe ();
		1337	AnyEvent::Util::fh_nonblocking ($SIGPIPE_R) if $SIGPIPE_R;
		1338	AnyEvent::Util::fh_nonblocking ($SIGPIPE_W) if $SIGPIPE_W; # just in case
		1339	} else {
		1340	pipe $SIGPIPE_R, $SIGPIPE_W;
		1341	fcntl $SIGPIPE_R, &Fcntl::F_SETFL, &Fcntl::O_NONBLOCK if $SIGPIPE_R;
		1342	fcntl $SIGPIPE_W, &Fcntl::F_SETFL, &Fcntl::O_NONBLOCK if $SIGPIPE_W; # just in case
		1343
		1344	# not strictly required, as $^F is normally 2, but let's make sure...
		1345	fcntl $SIGPIPE_R, &Fcntl::F_SETFD, &Fcntl::FD_CLOEXEC;
		1346	fcntl $SIGPIPE_W, &Fcntl::F_SETFD, &Fcntl::FD_CLOEXEC;
		1347	}
		1348
		1349	$SIGPIPE_R
		1350	or Carp::croak "AnyEvent: unable to create a signal reporting pipe: $!\n";
		1351
		1352	$SIG_IO = AnyEvent->io (fh => $SIGPIPE_R, poll => "r", cb => \&_signal_exec);
		1353	}
		1354
		1355	*signal = \&_signal;
		1356	&signal
		1357	}
		1358
988	sub AnyEvent::Base::Signal::DESTROY {	1359	sub AnyEvent::Base::signal::DESTROY {
989	my ($signal, $cb) = @{$_[0]};	1360	my ($signal, $cb) = @{$_[0]};
990		1361
		1362	undef $SIG_TW
		1363	unless --$SIG_COUNT;
		1364
991	delete $SIG_CB{$signal}{$cb};	1365	delete $SIG_CB{$signal}{$cb};
992		1366
993	$SIG{$signal} = 'DEFAULT' unless keys %{ $SIG_CB{$signal} };	1367	$HAVE_ASYNC_INTERRUPT
		1368	? delete $SIG_ASY{$signal}
		1369	: # delete doesn't work with older perls - they then
		1370	# print weird messages, or just unconditionally exit
		1371	# instead of getting the default action.
		1372	undef $SIG{$signal}
		1373	unless keys %{ $SIG_CB{$signal} };
994	}	1374	}
995		1375
996	# default implementation for ->child	1376	# default implementation for ->child
997		1377
998	our %PID_CB;	1378	our %PID_CB;
999	our $CHLD_W;	1379	our $CHLD_W;
1000	our $CHLD_DELAY_W;	1380	our $CHLD_DELAY_W;
1001	our $PID_IDLE;
1002	our $WNOHANG;	1381	our $WNOHANG;
1003		1382
1004	sub _child_wait {	1383	sub _sigchld {
1005	while (0 < (my $pid = waitpid -1, $WNOHANG)) {	1384	while (0 < (my $pid = waitpid -1, $WNOHANG)) {
		1385	$_->($pid, $?)
1006	$_->($pid, $?) for (values %{ $PID_CB{$pid} || {} }),	1386	for values %{ $PID_CB{$pid} || {} },
1007	(values %{ $PID_CB{0} || {} });	1387	values %{ $PID_CB{0} || {} };
1008	}	1388	}
1009
1010	undef $PID_IDLE;
1011	}
1012
1013	sub _sigchld {
1014	# make sure we deliver these changes "synchronous" with the event loop.
1015	$CHLD_DELAY_W ||= AnyEvent->timer (after => 0, cb => sub {
1016	undef $CHLD_DELAY_W;
1017	&_child_wait;
1018	});
1019	}	1389	}
1020		1390
1021	sub child {	1391	sub child {
1022	my (undef, %arg) = @_;	1392	my (undef, %arg) = @_;
1023		1393
1024	defined (my $pid = $arg{pid} + 0)	1394	defined (my $pid = $arg{pid} + 0)
1025	or Carp::croak "required option 'pid' is missing";	1395	or Carp::croak "required option 'pid' is missing";
1026		1396
1027	$PID_CB{$pid}{$arg{cb}} = $arg{cb};	1397	$PID_CB{$pid}{$arg{cb}} = $arg{cb};
1028		1398
1029	unless ($WNOHANG) {	1399	# WNOHANG is almost cetrainly 1 everywhere
		1400	$WNOHANG ||= $^O =~ /^(?:openbsd|netbsd|linux|freebsd|cygwin|MSWin32)$/
		1401	? 1
1030	$WNOHANG = eval { local $SIG{__DIE__}; require POSIX; &POSIX::WNOHANG } || 1;	1402	: eval { local $SIG{__DIE__}; require POSIX; &POSIX::WNOHANG } || 1;
1031	}
1032		1403
1033	unless ($CHLD_W) {	1404	unless ($CHLD_W) {
1034	$CHLD_W = AnyEvent->signal (signal => 'CHLD', cb => \&_sigchld);	1405	$CHLD_W = AnyEvent->signal (signal => 'CHLD', cb => \&_sigchld);
1035	# child could be a zombie already, so make at least one round	1406	# child could be a zombie already, so make at least one round
1036	&_sigchld;	1407	&_sigchld;
1037	}	1408	}
1038		1409
1039	bless [$pid, $arg{cb}], "AnyEvent::Base::Child"	1410	bless [$pid, $arg{cb}], "AnyEvent::Base::child"
1040	}	1411	}
1041		1412
1042	sub AnyEvent::Base::Child::DESTROY {	1413	sub AnyEvent::Base::child::DESTROY {
1043	my ($pid, $cb) = @{$_[0]};	1414	my ($pid, $cb) = @{$_[0]};
1044		1415
1045	delete $PID_CB{$pid}{$cb};	1416	delete $PID_CB{$pid}{$cb};
1046	delete $PID_CB{$pid} unless keys %{ $PID_CB{$pid} };	1417	delete $PID_CB{$pid} unless keys %{ $PID_CB{$pid} };
1047		1418
1048	undef $CHLD_W unless keys %PID_CB;	1419	undef $CHLD_W unless keys %PID_CB;
1049	}	1420	}
1050		1421
		1422	# idle emulation is done by simply using a timer, regardless
		1423	# of whether the process is idle or not, and not letting
		1424	# the callback use more than 50% of the time.
		1425	sub idle {
		1426	my (undef, %arg) = @_;
		1427
		1428	my ($cb, $w, $rcb) = $arg{cb};
		1429
		1430	$rcb = sub {
		1431	if ($cb) {
		1432	$w = _time;
		1433	&$cb;
		1434	$w = _time - $w;
		1435
		1436	# never use more then 50% of the time for the idle watcher,
		1437	# within some limits
		1438	$w = 0.0001 if $w < 0.0001;
		1439	$w = 5 if $w > 5;
		1440
		1441	$w = AnyEvent->timer (after => $w, cb => $rcb);
		1442	} else {
		1443	# clean up...
		1444	undef $w;
		1445	undef $rcb;
		1446	}
		1447	};
		1448
		1449	$w = AnyEvent->timer (after => 0.05, cb => $rcb);
		1450
		1451	bless \\$cb, "AnyEvent::Base::idle"
		1452	}
		1453
		1454	sub AnyEvent::Base::idle::DESTROY {
		1455	undef $${$_[0]};
		1456	}
		1457
1051	package AnyEvent::CondVar;	1458	package AnyEvent::CondVar;
1052		1459
1053	our @ISA = AnyEvent::CondVar::Base::;	1460	our @ISA = AnyEvent::CondVar::Base::;
1054		1461
1055	package AnyEvent::CondVar::Base;	1462	package AnyEvent::CondVar::Base;
1056		1463
1057	use overload	1464	#use overload
1058	'&{}' => sub { my $self = shift; sub { $self->send (@_) } },	1465	# '&{}' => sub { my $self = shift; sub { $self->send (@_) } },
1059	fallback => 1;	1466	# fallback => 1;
		1467
		1468	# save 300+ kilobytes by dirtily hardcoding overloading
		1469	${"AnyEvent::CondVar::Base::OVERLOAD"}{dummy}++; # Register with magic by touching.
		1470	*{'AnyEvent::CondVar::Base::()'} = sub { }; # "Make it findable via fetchmethod."
		1471	*{'AnyEvent::CondVar::Base::(&{}'} = sub { my $self = shift; sub { $self->send (@_) } }; # &{}
		1472	${'AnyEvent::CondVar::Base::()'} = 1; # fallback
		1473
		1474	our $WAITING;
1060		1475
1061	sub _send {	1476	sub _send {
1062	# nop	1477	# nop
1063	}	1478	}
1064		1479
…		…
1077	sub ready {	1492	sub ready {
1078	$_[0]{_ae_sent}	1493	$_[0]{_ae_sent}
1079	}	1494	}
1080		1495
1081	sub _wait {	1496	sub _wait {
		1497	$WAITING
		1498	and !$_[0]{_ae_sent}
		1499	and Carp::croak "AnyEvent::CondVar: recursive blocking wait detected";
		1500
		1501	local $WAITING = 1;
1082	AnyEvent->one_event while !$_[0]{_ae_sent};	1502	AnyEvent->one_event while !$_[0]{_ae_sent};
1083	}	1503	}
1084		1504
1085	sub recv {	1505	sub recv {
1086	$_[0]->_wait;	1506	$_[0]->_wait;
…		…
1105	}	1525	}
1106		1526
1107	# undocumented/compatibility with pre-3.4	1527	# undocumented/compatibility with pre-3.4
1108	*broadcast = \&send;	1528	*broadcast = \&send;
1109	*wait = \&_wait;	1529	*wait = \&_wait;
		1530
		1531	=head1 ERROR AND EXCEPTION HANDLING
		1532
		1533	In general, AnyEvent does not do any error handling - it relies on the
		1534	caller to do that if required. The L<AnyEvent::Strict> module (see also
		1535	the C<PERL_ANYEVENT_STRICT> environment variable, below) provides strict
		1536	checking of all AnyEvent methods, however, which is highly useful during
		1537	development.
		1538
		1539	As for exception handling (i.e. runtime errors and exceptions thrown while
		1540	executing a callback), this is not only highly event-loop specific, but
		1541	also not in any way wrapped by this module, as this is the job of the main
		1542	program.
		1543
		1544	The pure perl event loop simply re-throws the exception (usually
		1545	within C<< condvar->recv >>), the L<Event> and L<EV> modules call C<<
		1546	$Event/EV::DIED->() >>, L<Glib> uses C<< install_exception_handler >> and
		1547	so on.
		1548
		1549	=head1 ENVIRONMENT VARIABLES
		1550
		1551	The following environment variables are used by this module or its
		1552	submodules.
		1553
		1554	Note that AnyEvent will remove I<all> environment variables starting with
		1555	C<PERL_ANYEVENT_> from C<%ENV> when it is loaded while taint mode is
		1556	enabled.
		1557
		1558	=over 4
		1559
		1560	=item C<PERL_ANYEVENT_VERBOSE>
		1561
		1562	By default, AnyEvent will be completely silent except in fatal
		1563	conditions. You can set this environment variable to make AnyEvent more
		1564	talkative.
		1565
		1566	When set to C<1> or higher, causes AnyEvent to warn about unexpected
		1567	conditions, such as not being able to load the event model specified by
		1568	C<PERL_ANYEVENT_MODEL>.
		1569
		1570	When set to C<2> or higher, cause AnyEvent to report to STDERR which event
		1571	model it chooses.
		1572
		1573	When set to C<8> or higher, then AnyEvent will report extra information on
		1574	which optional modules it loads and how it implements certain features.
		1575
		1576	=item C<PERL_ANYEVENT_STRICT>
		1577
		1578	AnyEvent does not do much argument checking by default, as thorough
		1579	argument checking is very costly. Setting this variable to a true value
		1580	will cause AnyEvent to load C<AnyEvent::Strict> and then to thoroughly
		1581	check the arguments passed to most method calls. If it finds any problems,
		1582	it will croak.
		1583
		1584	In other words, enables "strict" mode.
		1585
		1586	Unlike C<use strict> (or it's modern cousin, C<< use L<common::sense>
		1587	>>, it is definitely recommended to keep it off in production. Keeping
		1588	C<PERL_ANYEVENT_STRICT=1> in your environment while developing programs
		1589	can be very useful, however.
		1590
		1591	=item C<PERL_ANYEVENT_MODEL>
		1592
		1593	This can be used to specify the event model to be used by AnyEvent, before
		1594	auto detection and -probing kicks in. It must be a string consisting
		1595	entirely of ASCII letters. The string C<AnyEvent::Impl::> gets prepended
		1596	and the resulting module name is loaded and if the load was successful,
		1597	used as event model. If it fails to load AnyEvent will proceed with
		1598	auto detection and -probing.
		1599
		1600	This functionality might change in future versions.
		1601
		1602	For example, to force the pure perl model (L<AnyEvent::Impl::Perl>) you
		1603	could start your program like this:
		1604
		1605	PERL_ANYEVENT_MODEL=Perl perl ...
		1606
		1607	=item C<PERL_ANYEVENT_PROTOCOLS>
		1608
		1609	Used by both L<AnyEvent::DNS> and L<AnyEvent::Socket> to determine preferences
		1610	for IPv4 or IPv6. The default is unspecified (and might change, or be the result
		1611	of auto probing).
		1612
		1613	Must be set to a comma-separated list of protocols or address families,
		1614	current supported: C<ipv4> and C<ipv6>. Only protocols mentioned will be
		1615	used, and preference will be given to protocols mentioned earlier in the
		1616	list.
		1617
		1618	This variable can effectively be used for denial-of-service attacks
		1619	against local programs (e.g. when setuid), although the impact is likely
		1620	small, as the program has to handle conenction and other failures anyways.
		1621
		1622	Examples: C<PERL_ANYEVENT_PROTOCOLS=ipv4,ipv6> - prefer IPv4 over IPv6,
		1623	but support both and try to use both. C<PERL_ANYEVENT_PROTOCOLS=ipv4>
		1624	- only support IPv4, never try to resolve or contact IPv6
		1625	addresses. C<PERL_ANYEVENT_PROTOCOLS=ipv6,ipv4> support either IPv4 or
		1626	IPv6, but prefer IPv6 over IPv4.
		1627
		1628	=item C<PERL_ANYEVENT_EDNS0>
		1629
		1630	Used by L<AnyEvent::DNS> to decide whether to use the EDNS0 extension
		1631	for DNS. This extension is generally useful to reduce DNS traffic, but
		1632	some (broken) firewalls drop such DNS packets, which is why it is off by
		1633	default.
		1634
		1635	Setting this variable to C<1> will cause L<AnyEvent::DNS> to announce
		1636	EDNS0 in its DNS requests.
		1637
		1638	=item C<PERL_ANYEVENT_MAX_FORKS>
		1639
		1640	The maximum number of child processes that C<AnyEvent::Util::fork_call>
		1641	will create in parallel.
		1642
		1643	=item C<PERL_ANYEVENT_MAX_OUTSTANDING_DNS>
		1644
		1645	The default value for the C<max_outstanding> parameter for the default DNS
		1646	resolver - this is the maximum number of parallel DNS requests that are
		1647	sent to the DNS server.
		1648
		1649	=item C<PERL_ANYEVENT_RESOLV_CONF>
		1650
		1651	The file to use instead of F</etc/resolv.conf> (or OS-specific
		1652	configuration) in the default resolver. When set to the empty string, no
		1653	default config will be used.
		1654
		1655	=item C<PERL_ANYEVENT_CA_FILE>, C<PERL_ANYEVENT_CA_PATH>.
		1656
		1657	When neither C<ca_file> nor C<ca_path> was specified during
		1658	L<AnyEvent::TLS> context creation, and either of these environment
		1659	variables exist, they will be used to specify CA certificate locations
		1660	instead of a system-dependent default.
		1661
		1662	=item C<PERL_ANYEVENT_AVOID_GUARD> and C<PERL_ANYEVENT_AVOID_ASYNC_INTERRUPT>
		1663
		1664	When these are set to C<1>, then the respective modules are not
		1665	loaded. Mostly good for testing AnyEvent itself.
		1666
		1667	=back
1110		1668
1111	=head1 SUPPLYING YOUR OWN EVENT MODEL INTERFACE	1669	=head1 SUPPLYING YOUR OWN EVENT MODEL INTERFACE
1112		1670
1113	This is an advanced topic that you do not normally need to use AnyEvent in	1671	This is an advanced topic that you do not normally need to use AnyEvent in
1114	a module. This section is only of use to event loop authors who want to	1672	a module. This section is only of use to event loop authors who want to
…		…
1148		1706
1149	I<rxvt-unicode> also cheats a bit by not providing blocking access to	1707	I<rxvt-unicode> also cheats a bit by not providing blocking access to
1150	condition variables: code blocking while waiting for a condition will	1708	condition variables: code blocking while waiting for a condition will
1151	C<die>. This still works with most modules/usages, and blocking calls must	1709	C<die>. This still works with most modules/usages, and blocking calls must
1152	not be done in an interactive application, so it makes sense.	1710	not be done in an interactive application, so it makes sense.
1153
1154	=head1 ENVIRONMENT VARIABLES
1155
1156	The following environment variables are used by this module:
1157
1158	=over 4
1159
1160	=item C<PERL_ANYEVENT_VERBOSE>
1161
1162	By default, AnyEvent will be completely silent except in fatal
1163	conditions. You can set this environment variable to make AnyEvent more
1164	talkative.
1165
1166	When set to C<1> or higher, causes AnyEvent to warn about unexpected
1167	conditions, such as not being able to load the event model specified by
1168	C<PERL_ANYEVENT_MODEL>.
1169
1170	When set to C<2> or higher, cause AnyEvent to report to STDERR which event
1171	model it chooses.
1172
1173	=item C<PERL_ANYEVENT_MODEL>
1174
1175	This can be used to specify the event model to be used by AnyEvent, before
1176	auto detection and -probing kicks in. It must be a string consisting
1177	entirely of ASCII letters. The string C<AnyEvent::Impl::> gets prepended
1178	and the resulting module name is loaded and if the load was successful,
1179	used as event model. If it fails to load AnyEvent will proceed with
1180	auto detection and -probing.
1181
1182	This functionality might change in future versions.
1183
1184	For example, to force the pure perl model (L<AnyEvent::Impl::Perl>) you
1185	could start your program like this:
1186
1187	PERL_ANYEVENT_MODEL=Perl perl ...
1188
1189	=item C<PERL_ANYEVENT_PROTOCOLS>
1190
1191	Used by both L<AnyEvent::DNS> and L<AnyEvent::Socket> to determine preferences
1192	for IPv4 or IPv6. The default is unspecified (and might change, or be the result
1193	of auto probing).
1194
1195	Must be set to a comma-separated list of protocols or address families,
1196	current supported: C<ipv4> and C<ipv6>. Only protocols mentioned will be
1197	used, and preference will be given to protocols mentioned earlier in the
1198	list.
1199
1200	This variable can effectively be used for denial-of-service attacks
1201	against local programs (e.g. when setuid), although the impact is likely
1202	small, as the program has to handle connection errors already-
1203
1204	Examples: C<PERL_ANYEVENT_PROTOCOLS=ipv4,ipv6> - prefer IPv4 over IPv6,
1205	but support both and try to use both. C<PERL_ANYEVENT_PROTOCOLS=ipv4>
1206	- only support IPv4, never try to resolve or contact IPv6
1207	addresses. C<PERL_ANYEVENT_PROTOCOLS=ipv6,ipv4> support either IPv4 or
1208	IPv6, but prefer IPv6 over IPv4.
1209
1210	=item C<PERL_ANYEVENT_EDNS0>
1211
1212	Used by L<AnyEvent::DNS> to decide whether to use the EDNS0 extension
1213	for DNS. This extension is generally useful to reduce DNS traffic, but
1214	some (broken) firewalls drop such DNS packets, which is why it is off by
1215	default.
1216
1217	Setting this variable to C<1> will cause L<AnyEvent::DNS> to announce
1218	EDNS0 in its DNS requests.
1219
1220	=item C<PERL_ANYEVENT_MAX_FORKS>
1221
1222	The maximum number of child processes that C<AnyEvent::Util::fork_call>
1223	will create in parallel.
1224
1225	=back
1226		1711
1227	=head1 EXAMPLE PROGRAM	1712	=head1 EXAMPLE PROGRAM
1228		1713
1229	The following program uses an I/O watcher to read data from STDIN, a timer	1714	The following program uses an I/O watcher to read data from STDIN, a timer
1230	to display a message once per second, and a condition variable to quit the	1715	to display a message once per second, and a condition variable to quit the
…		…
1424	watcher.	1909	watcher.
1425		1910
1426	=head3 Results	1911	=head3 Results
1427		1912
1428	name watchers bytes create invoke destroy comment	1913	name watchers bytes create invoke destroy comment
1429	EV/EV 400000 244 0.56 0.46 0.31 EV native interface	1914	EV/EV 400000 224 0.47 0.35 0.27 EV native interface
1430	EV/Any 100000 244 2.50 0.46 0.29 EV + AnyEvent watchers	1915	EV/Any 100000 224 2.88 0.34 0.27 EV + AnyEvent watchers
1431	CoroEV/Any 100000 244 2.49 0.44 0.29 coroutines + Coro::Signal	1916	CoroEV/Any 100000 224 2.85 0.35 0.28 coroutines + Coro::Signal
1432	Perl/Any 100000 513 4.92 0.87 1.12 pure perl implementation	1917	Perl/Any 100000 452 4.13 0.73 0.95 pure perl implementation
1433	Event/Event 16000 516 31.88 31.30 0.85 Event native interface	1918	Event/Event 16000 517 32.20 31.80 0.81 Event native interface
1434	Event/Any 16000 590 35.75 31.42 1.08 Event + AnyEvent watchers	1919	Event/Any 16000 590 35.85 31.55 1.06 Event + AnyEvent watchers
		1920	IOAsync/Any 16000 989 38.10 32.77 11.13 via IO::Async::Loop::IO_Poll
		1921	IOAsync/Any 16000 990 37.59 29.50 10.61 via IO::Async::Loop::Epoll
1435	Glib/Any 16000 1357 98.22 12.41 54.00 quadratic behaviour	1922	Glib/Any 16000 1357 102.33 12.31 51.00 quadratic behaviour
1436	Tk/Any 2000 1860 26.97 67.98 14.00 SEGV with >> 2000 watchers	1923	Tk/Any 2000 1860 27.20 66.31 14.00 SEGV with >> 2000 watchers
1437	POE/Event 2000 6644 108.64 736.02 14.73 via POE::Loop::Event	1924	POE/Event 2000 6328 109.99 751.67 14.02 via POE::Loop::Event
1438	POE/Select 2000 6343 94.13 809.12 565.96 via POE::Loop::Select	1925	POE/Select 2000 6027 94.54 809.13 579.80 via POE::Loop::Select
1439		1926
1440	=head3 Discussion	1927	=head3 Discussion
1441		1928
1442	The benchmark does I<not> measure scalability of the event loop very	1929	The benchmark does I<not> measure scalability of the event loop very
1443	well. For example, a select-based event loop (such as the pure perl one)	1930	well. For example, a select-based event loop (such as the pure perl one)
…		…
1468	performance becomes really bad with lots of file descriptors (and few of	1955	performance becomes really bad with lots of file descriptors (and few of
1469	them active), of course, but this was not subject of this benchmark.	1956	them active), of course, but this was not subject of this benchmark.
1470		1957
1471	The C<Event> module has a relatively high setup and callback invocation	1958	The C<Event> module has a relatively high setup and callback invocation
1472	cost, but overall scores in on the third place.	1959	cost, but overall scores in on the third place.
		1960
		1961	C<IO::Async> performs admirably well, about on par with C<Event>, even
		1962	when using its pure perl backend.
1473		1963
1474	C<Glib>'s memory usage is quite a bit higher, but it features a	1964	C<Glib>'s memory usage is quite a bit higher, but it features a
1475	faster callback invocation and overall ends up in the same class as	1965	faster callback invocation and overall ends up in the same class as
1476	C<Event>. However, Glib scales extremely badly, doubling the number of	1966	C<Event>. However, Glib scales extremely badly, doubling the number of
1477	watchers increases the processing time by more than a factor of four,	1967	watchers increases the processing time by more than a factor of four,
…		…
1555	it to another server. This includes deleting the old timeout and creating	2045	it to another server. This includes deleting the old timeout and creating
1556	a new one that moves the timeout into the future.	2046	a new one that moves the timeout into the future.
1557		2047
1558	=head3 Results	2048	=head3 Results
1559		2049
1560	name sockets create request	2050	name sockets create request
1561	EV 20000 69.01 11.16	2051	EV 20000 69.01 11.16
1562	Perl 20000 73.32 35.87	2052	Perl 20000 73.32 35.87
		2053	IOAsync 20000 157.00 98.14 epoll
		2054	IOAsync 20000 159.31 616.06 poll
1563	Event 20000 212.62 257.32	2055	Event 20000 212.62 257.32
1564	Glib 20000 651.16 1896.30	2056	Glib 20000 651.16 1896.30
1565	POE 20000 349.67 12317.24 uses POE::Loop::Event	2057	POE 20000 349.67 12317.24 uses POE::Loop::Event
1566		2058
1567	=head3 Discussion	2059	=head3 Discussion
1568		2060
1569	This benchmark I<does> measure scalability and overall performance of the	2061	This benchmark I<does> measure scalability and overall performance of the
1570	particular event loop.	2062	particular event loop.
…		…
1572	EV is again fastest. Since it is using epoll on my system, the setup time	2064	EV is again fastest. Since it is using epoll on my system, the setup time
1573	is relatively high, though.	2065	is relatively high, though.
1574		2066
1575	Perl surprisingly comes second. It is much faster than the C-based event	2067	Perl surprisingly comes second. It is much faster than the C-based event
1576	loops Event and Glib.	2068	loops Event and Glib.
		2069
		2070	IO::Async performs very well when using its epoll backend, and still quite
		2071	good compared to Glib when using its pure perl backend.
1577		2072
1578	Event suffers from high setup time as well (look at its code and you will	2073	Event suffers from high setup time as well (look at its code and you will
1579	understand why). Callback invocation also has a high overhead compared to	2074	understand why). Callback invocation also has a high overhead compared to
1580	the C<< $_->() for .. >>-style loop that the Perl event loop uses. Event	2075	the C<< $_->() for .. >>-style loop that the Perl event loop uses. Event
1581	uses select or poll in basically all documented configurations.	2076	uses select or poll in basically all documented configurations.
…		…
1644	=item * C-based event loops perform very well with small number of	2139	=item * C-based event loops perform very well with small number of
1645	watchers, as the management overhead dominates.	2140	watchers, as the management overhead dominates.
1646		2141
1647	=back	2142	=back
1648		2143
		2144	=head2 THE IO::Lambda BENCHMARK
		2145
		2146	Recently I was told about the benchmark in the IO::Lambda manpage, which
		2147	could be misinterpreted to make AnyEvent look bad. In fact, the benchmark
		2148	simply compares IO::Lambda with POE, and IO::Lambda looks better (which
		2149	shouldn't come as a surprise to anybody). As such, the benchmark is
		2150	fine, and mostly shows that the AnyEvent backend from IO::Lambda isn't
		2151	very optimal. But how would AnyEvent compare when used without the extra
		2152	baggage? To explore this, I wrote the equivalent benchmark for AnyEvent.
		2153
		2154	The benchmark itself creates an echo-server, and then, for 500 times,
		2155	connects to the echo server, sends a line, waits for the reply, and then
		2156	creates the next connection. This is a rather bad benchmark, as it doesn't
		2157	test the efficiency of the framework or much non-blocking I/O, but it is a
		2158	benchmark nevertheless.
		2159
		2160	name runtime
		2161	Lambda/select 0.330 sec
		2162	+ optimized 0.122 sec
		2163	Lambda/AnyEvent 0.327 sec
		2164	+ optimized 0.138 sec
		2165	Raw sockets/select 0.077 sec
		2166	POE/select, components 0.662 sec
		2167	POE/select, raw sockets 0.226 sec
		2168	POE/select, optimized 0.404 sec
		2169
		2170	AnyEvent/select/nb 0.085 sec
		2171	AnyEvent/EV/nb 0.068 sec
		2172	+state machine 0.134 sec
		2173
		2174	The benchmark is also a bit unfair (my fault): the IO::Lambda/POE
		2175	benchmarks actually make blocking connects and use 100% blocking I/O,
		2176	defeating the purpose of an event-based solution. All of the newly
		2177	written AnyEvent benchmarks use 100% non-blocking connects (using
		2178	AnyEvent::Socket::tcp_connect and the asynchronous pure perl DNS
		2179	resolver), so AnyEvent is at a disadvantage here, as non-blocking connects
		2180	generally require a lot more bookkeeping and event handling than blocking
		2181	connects (which involve a single syscall only).
		2182
		2183	The last AnyEvent benchmark additionally uses L<AnyEvent::Handle>, which
		2184	offers similar expressive power as POE and IO::Lambda, using conventional
		2185	Perl syntax. This means that both the echo server and the client are 100%
		2186	non-blocking, further placing it at a disadvantage.
		2187
		2188	As you can see, the AnyEvent + EV combination even beats the
		2189	hand-optimised "raw sockets benchmark", while AnyEvent + its pure perl
		2190	backend easily beats IO::Lambda and POE.
		2191
		2192	And even the 100% non-blocking version written using the high-level (and
		2193	slow :) L<AnyEvent::Handle> abstraction beats both POE and IO::Lambda by a
		2194	large margin, even though it does all of DNS, tcp-connect and socket I/O
		2195	in a non-blocking way.
		2196
		2197	The two AnyEvent benchmarks programs can be found as F<eg/ae0.pl> and
		2198	F<eg/ae2.pl> in the AnyEvent distribution, the remaining benchmarks are
		2199	part of the IO::lambda distribution and were used without any changes.
		2200
		2201
		2202	=head1 SIGNALS
		2203
		2204	AnyEvent currently installs handlers for these signals:
		2205
		2206	=over 4
		2207
		2208	=item SIGCHLD
		2209
		2210	A handler for C<SIGCHLD> is installed by AnyEvent's child watcher
		2211	emulation for event loops that do not support them natively. Also, some
		2212	event loops install a similar handler.
		2213
		2214	Additionally, when AnyEvent is loaded and SIGCHLD is set to IGNORE, then
		2215	AnyEvent will reset it to default, to avoid losing child exit statuses.
		2216
		2217	=item SIGPIPE
		2218
		2219	A no-op handler is installed for C<SIGPIPE> when C<$SIG{PIPE}> is C<undef>
		2220	when AnyEvent gets loaded.
		2221
		2222	The rationale for this is that AnyEvent users usually do not really depend
		2223	on SIGPIPE delivery (which is purely an optimisation for shell use, or
		2224	badly-written programs), but C<SIGPIPE> can cause spurious and rare
		2225	program exits as a lot of people do not expect C<SIGPIPE> when writing to
		2226	some random socket.
		2227
		2228	The rationale for installing a no-op handler as opposed to ignoring it is
		2229	that this way, the handler will be restored to defaults on exec.
		2230
		2231	Feel free to install your own handler, or reset it to defaults.
		2232
		2233	=back
		2234
		2235	=cut
		2236
		2237	undef $SIG{CHLD}
		2238	if $SIG{CHLD} eq 'IGNORE';
		2239
		2240	$SIG{PIPE} = sub { }
		2241	unless defined $SIG{PIPE};
		2242
		2243	=head1 RECOMMENDED/OPTIONAL MODULES
		2244
		2245	One of AnyEvent's main goals is to be 100% Pure-Perl(tm): only perl (and
		2246	it's built-in modules) are required to use it.
		2247
		2248	That does not mean that AnyEvent won't take advantage of some additional
		2249	modules if they are installed.
		2250
		2251	This section epxlains which additional modules will be used, and how they
		2252	affect AnyEvent's operetion.
		2253
		2254	=over 4
		2255
		2256	=item L<Async::Interrupt>
		2257
		2258	This slightly arcane module is used to implement fast signal handling: To
		2259	my knowledge, there is no way to do completely race-free and quick
		2260	signal handling in pure perl. To ensure that signals still get
		2261	delivered, AnyEvent will start an interval timer to wake up perl (and
		2262	catch the signals) with soemd elay (default is 10 seconds, look for
		2263	C<$AnyEvent::MAX_SIGNAL_LATENCY>).
		2264
		2265	If this module is available, then it will be used to implement signal
		2266	catching, which means that signals will not be delayed, and the event loop
		2267	will not be interrupted regularly, which is more efficient (And good for
		2268	battery life on laptops).
		2269
		2270	This affects not just the pure-perl event loop, but also other event loops
		2271	that have no signal handling on their own (e.g. Glib, Tk, Qt).
		2272
		2273	=item L<EV>
		2274
		2275	This module isn't really "optional", as it is simply one of the backend
		2276	event loops that AnyEvent can use. However, it is simply the best event
		2277	loop available in terms of features, speed and stability: It supports
		2278	the AnyEvent API optimally, implements all the watcher types in XS, does
		2279	automatic timer adjustments even when no monotonic clock is available,
		2280	can take avdantage of advanced kernel interfaces such as C<epoll> and
		2281	C<kqueue>, and is the fastest backend I<by far>. You can even embed
		2282	L<Glib>/L<Gtk2> in it (or vice versa, see L<EV::Glib> and L<Glib::EV>).
		2283
		2284	=item L<Guard>
		2285
		2286	The guard module, when used, will be used to implement
		2287	C<AnyEvent::Util::guard>. This speeds up guards considerably (and uses a
		2288	lot less memory), but otherwise doesn't affect guard operation much. It is
		2289	purely used for performance.
		2290
		2291	=item L<JSON> and L<JSON::XS>
		2292
		2293	This module is required when you want to read or write JSON data via
		2294	L<AnyEvent::Handle>. It is also written in pure-perl, but can take
		2295	advantage of the ulta-high-speed L<JSON::XS> module when it is installed.
		2296
		2297	In fact, L<AnyEvent::Handle> will use L<JSON::XS> by default if it is
		2298	installed.
		2299
		2300	=item L<Net::SSLeay>
		2301
		2302	Implementing TLS/SSL in Perl is certainly interesting, but not very
		2303	worthwhile: If this module is installed, then L<AnyEvent::Handle> (with
		2304	the help of L<AnyEvent::TLS>), gains the ability to do TLS/SSL.
		2305
		2306	=item L<Time::HiRes>
		2307
		2308	This module is part of perl since release 5.008. It will be used when the
		2309	chosen event library does not come with a timing source on it's own. The
		2310	pure-perl event loop (L<AnyEvent::Impl::Perl>) will additionally use it to
		2311	try to use a monotonic clock for timing stability.
		2312
		2313	=back
		2314
1649		2315
1650	=head1 FORK	2316	=head1 FORK
1651		2317
1652	Most event libraries are not fork-safe. The ones who are usually are	2318	Most event libraries are not fork-safe. The ones who are usually are
1653	because they rely on inefficient but fork-safe C<select> or C<poll>	2319	because they rely on inefficient but fork-safe C<select> or C<poll>
1654	calls. Only L<EV> is fully fork-aware.	2320	calls. Only L<EV> is fully fork-aware.
1655		2321
1656	If you have to fork, you must either do so I<before> creating your first	2322	If you have to fork, you must either do so I<before> creating your first
1657	watcher OR you must not use AnyEvent at all in the child.	2323	watcher OR you must not use AnyEvent at all in the child OR you must do
		2324	something completely out of the scope of AnyEvent.
1658		2325
1659		2326
1660	=head1 SECURITY CONSIDERATIONS	2327	=head1 SECURITY CONSIDERATIONS
1661		2328
1662	AnyEvent can be forced to load any event model via	2329	AnyEvent can be forced to load any event model via
…		…
1673		2340
1674	use AnyEvent;	2341	use AnyEvent;
1675		2342
1676	Similar considerations apply to $ENV{PERL_ANYEVENT_VERBOSE}, as that can	2343	Similar considerations apply to $ENV{PERL_ANYEVENT_VERBOSE}, as that can
1677	be used to probe what backend is used and gain other information (which is	2344	be used to probe what backend is used and gain other information (which is
1678	probably even less useful to an attacker than PERL_ANYEVENT_MODEL).	2345	probably even less useful to an attacker than PERL_ANYEVENT_MODEL), and
		2346	$ENV{PERL_ANYEVENT_STRICT}.
		2347
		2348	Note that AnyEvent will remove I<all> environment variables starting with
		2349	C<PERL_ANYEVENT_> from C<%ENV> when it is loaded while taint mode is
		2350	enabled.
1679		2351
1680		2352
1681	=head1 BUGS	2353	=head1 BUGS
1682		2354
1683	Perl 5.8 has numerous memleaks that sometimes hit this module and are hard	2355	Perl 5.8 has numerous memleaks that sometimes hit this module and are hard
1684	to work around. If you suffer from memleaks, first upgrade to Perl 5.10	2356	to work around. If you suffer from memleaks, first upgrade to Perl 5.10
1685	and check wether the leaks still show up. (Perl 5.10.0 has other annoying	2357	and check wether the leaks still show up. (Perl 5.10.0 has other annoying
1686	mamleaks, such as leaking on C<map> and C<grep> but it is usually not as	2358	memleaks, such as leaking on C<map> and C<grep> but it is usually not as
1687	pronounced).	2359	pronounced).
1688		2360
1689		2361
1690	=head1 SEE ALSO	2362	=head1 SEE ALSO
1691		2363
…		…
1695	L<Glib>, L<Tk>, L<Event::Lib>, L<Qt>, L<POE>.	2367	L<Glib>, L<Tk>, L<Event::Lib>, L<Qt>, L<POE>.
1696		2368
1697	Implementations: L<AnyEvent::Impl::EV>, L<AnyEvent::Impl::Event>,	2369	Implementations: L<AnyEvent::Impl::EV>, L<AnyEvent::Impl::Event>,
1698	L<AnyEvent::Impl::Glib>, L<AnyEvent::Impl::Tk>, L<AnyEvent::Impl::Perl>,	2370	L<AnyEvent::Impl::Glib>, L<AnyEvent::Impl::Tk>, L<AnyEvent::Impl::Perl>,
1699	L<AnyEvent::Impl::EventLib>, L<AnyEvent::Impl::Qt>,	2371	L<AnyEvent::Impl::EventLib>, L<AnyEvent::Impl::Qt>,
1700	L<AnyEvent::Impl::POE>.	2372	L<AnyEvent::Impl::POE>, L<AnyEvent::Impl::IOAsync>.
1701		2373
1702	Non-blocking file handles, sockets, TCP clients and	2374	Non-blocking file handles, sockets, TCP clients and
1703	servers: L<AnyEvent::Handle>, L<AnyEvent::Socket>.	2375	servers: L<AnyEvent::Handle>, L<AnyEvent::Socket>, L<AnyEvent::TLS>.
1704		2376
1705	Asynchronous DNS: L<AnyEvent::DNS>.	2377	Asynchronous DNS: L<AnyEvent::DNS>.
1706		2378
1707	Coroutine support: L<Coro>, L<Coro::AnyEvent>, L<Coro::EV>, L<Coro::Event>,	2379	Coroutine support: L<Coro>, L<Coro::AnyEvent>, L<Coro::EV>,
		2380	L<Coro::Event>,
1708		2381
1709	Nontrivial usage examples: L<Net::FCP>, L<Net::XMPP2>, L<AnyEvent::DNS>.	2382	Nontrivial usage examples: L<AnyEvent::GPSD>, L<AnyEvent::XMPP>,
		2383	L<AnyEvent::HTTP>.
1710		2384
1711		2385
1712	=head1 AUTHOR	2386	=head1 AUTHOR
1713		2387
1714	Marc Lehmann <schmorp@schmorp.de>	2388	Marc Lehmann <schmorp@schmorp.de>

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines