ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent.pm

Comparing AnyEvent/lib/AnyEvent.pm (file contents):
Revision 1.105 by root, Thu May 1 12:35:54 2008 UTC vs.
Revision 1.269 by root, Fri Jul 31 20:16:29 2009 UTC

1	=head1 NAME	1	=head1 NAME
2		2
3	AnyEvent - provide framework for multiple event loops	3	AnyEvent - the DBI of event loop programming
4		4
5	EV, Event, Coro::EV, Coro::Event, Glib, Tk, Perl, Event::Lib, Qt, POE - various supported event loops	5	EV, Event, Glib, Tk, Perl, Event::Lib, Irssi, rxvt-unicode, IO::Async, Qt
		6	and POE are various supported event loops/environments.
6		7
7	=head1 SYNOPSIS	8	=head1 SYNOPSIS
8		9
9	use AnyEvent;	10	use AnyEvent;
10		11
		12	# file descriptor readable
11	my $w = AnyEvent->io (fh => $fh, poll => "r|w", cb => sub {	13	my $w = AnyEvent->io (fh => $fh, poll => "r", cb => sub { ... });
		14
		15	# one-shot or repeating timers
		16	my $w = AnyEvent->timer (after => $seconds, cb => sub { ... });
		17	my $w = AnyEvent->timer (after => $seconds, interval => $seconds, cb => ...
		18
		19	print AnyEvent->now; # prints current event loop time
		20	print AnyEvent->time; # think Time::HiRes::time or simply CORE::time.
		21
		22	# POSIX signal
		23	my $w = AnyEvent->signal (signal => "TERM", cb => sub { ... });
		24
		25	# child process exit
		26	my $w = AnyEvent->child (pid => $pid, cb => sub {
		27	my ($pid, $status) = @_;
12	...	28	...
13	});	29	});
14		30
15	my $w = AnyEvent->timer (after => $seconds, cb => sub {	31	# called when event loop idle (if applicable)
16	...	32	my $w = AnyEvent->idle (cb => sub { ... });
17	});
18		33
19	my $w = AnyEvent->condvar; # stores whether a condition was flagged	34	my $w = AnyEvent->condvar; # stores whether a condition was flagged
		35	$w->send; # wake up current and all future recv's
20	$w->wait; # enters "main loop" till $condvar gets ->broadcast	36	$w->recv; # enters "main loop" till $condvar gets ->send
21	$w->broadcast; # wake up current and all future wait's	37	# use a condvar in callback mode:
		38	$w->cb (sub { $_[0]->recv });
		39
		40	=head1 INTRODUCTION/TUTORIAL
		41
		42	This manpage is mainly a reference manual. If you are interested
		43	in a tutorial or some gentle introduction, have a look at the
		44	L<AnyEvent::Intro> manpage.
		45
		46	=head1 SUPPORT
		47
		48	There is a mailinglist for discussing all things AnyEvent, and an IRC
		49	channel, too.
		50
		51	See the AnyEvent project page at the B<Schmorpforge Ta-Sa Software
		52	Repository>, at L<http://anyevent.schmorp.de>, for more info.
22		53
23	=head1 WHY YOU SHOULD USE THIS MODULE (OR NOT)	54	=head1 WHY YOU SHOULD USE THIS MODULE (OR NOT)
24		55
25	Glib, POE, IO::Async, Event... CPAN offers event models by the dozen	56	Glib, POE, IO::Async, Event... CPAN offers event models by the dozen
26	nowadays. So what is different about AnyEvent?	57	nowadays. So what is different about AnyEvent?
27		58
28	Executive Summary: AnyEvent is I<compatible>, AnyEvent is I<free of	59	Executive Summary: AnyEvent is I<compatible>, AnyEvent is I<free of
29	policy> and AnyEvent is I<small and efficient>.	60	policy> and AnyEvent is I<small and efficient>.
30		61
31	First and foremost, I<AnyEvent is not an event model> itself, it only	62	First and foremost, I<AnyEvent is not an event model> itself, it only
32	interfaces to whatever event model the main program happens to use in a	63	interfaces to whatever event model the main program happens to use, in a
33	pragmatic way. For event models and certain classes of immortals alike,	64	pragmatic way. For event models and certain classes of immortals alike,
34	the statement "there can only be one" is a bitter reality: In general,	65	the statement "there can only be one" is a bitter reality: In general,
35	only one event loop can be active at the same time in a process. AnyEvent	66	only one event loop can be active at the same time in a process. AnyEvent
36	helps hiding the differences between those event loops.	67	cannot change this, but it can hide the differences between those event
		68	loops.
37		69
38	The goal of AnyEvent is to offer module authors the ability to do event	70	The goal of AnyEvent is to offer module authors the ability to do event
39	programming (waiting for I/O or timer events) without subscribing to a	71	programming (waiting for I/O or timer events) without subscribing to a
40	religion, a way of living, and most importantly: without forcing your	72	religion, a way of living, and most importantly: without forcing your
41	module users into the same thing by forcing them to use the same event	73	module users into the same thing by forcing them to use the same event
42	model you use.	74	model you use.
43		75
44	For modules like POE or IO::Async (which is a total misnomer as it is	76	For modules like POE or IO::Async (which is a total misnomer as it is
45	actually doing all I/O I<synchronously>...), using them in your module is	77	actually doing all I/O I<synchronously>...), using them in your module is
46	like joining a cult: After you joined, you are dependent on them and you	78	like joining a cult: After you joined, you are dependent on them and you
47	cannot use anything else, as it is simply incompatible to everything that	79	cannot use anything else, as they are simply incompatible to everything
48	isn't itself. What's worse, all the potential users of your module are	80	that isn't them. What's worse, all the potential users of your
49	I<also> forced to use the same event loop you use.	81	module are I<also> forced to use the same event loop you use.
50		82
51	AnyEvent is different: AnyEvent + POE works fine. AnyEvent + Glib works	83	AnyEvent is different: AnyEvent + POE works fine. AnyEvent + Glib works
52	fine. AnyEvent + Tk works fine etc. etc. but none of these work together	84	fine. AnyEvent + Tk works fine etc. etc. but none of these work together
53	with the rest: POE + IO::Async? no go. Tk + Event? no go. Again: if	85	with the rest: POE + IO::Async? No go. Tk + Event? No go. Again: if
54	your module uses one of those, every user of your module has to use it,	86	your module uses one of those, every user of your module has to use it,
55	too. But if your module uses AnyEvent, it works transparently with all	87	too. But if your module uses AnyEvent, it works transparently with all
56	event models it supports (including stuff like POE and IO::Async, as long	88	event models it supports (including stuff like IO::Async, as long as those
57	as those use one of the supported event loops. It is trivial to add new	89	use one of the supported event loops. It is trivial to add new event loops
58	event loops to AnyEvent, too, so it is future-proof).	90	to AnyEvent, too, so it is future-proof).
59		91
60	In addition to being free of having to use I<the one and only true event	92	In addition to being free of having to use I<the one and only true event
61	model>, AnyEvent also is free of bloat and policy: with POE or similar	93	model>, AnyEvent also is free of bloat and policy: with POE or similar
62	modules, you get an enourmous amount of code and strict rules you have to	94	modules, you get an enormous amount of code and strict rules you have to
63	follow. AnyEvent, on the other hand, is lean and up to the point, by only	95	follow. AnyEvent, on the other hand, is lean and up to the point, by only
64	offering the functionality that is necessary, in as thin as a wrapper as	96	offering the functionality that is necessary, in as thin as a wrapper as
65	technically possible.	97	technically possible.
66		98
		99	Of course, AnyEvent comes with a big (and fully optional!) toolbox
		100	of useful functionality, such as an asynchronous DNS resolver, 100%
		101	non-blocking connects (even with TLS/SSL, IPv6 and on broken platforms
		102	such as Windows) and lots of real-world knowledge and workarounds for
		103	platform bugs and differences.
		104
67	Of course, if you want lots of policy (this can arguably be somewhat	105	Now, if you I<do want> lots of policy (this can arguably be somewhat
68	useful) and you want to force your users to use the one and only event	106	useful) and you want to force your users to use the one and only event
69	model, you should I<not> use this module.	107	model, you should I<not> use this module.
70		108
71	=head1 DESCRIPTION	109	=head1 DESCRIPTION
72		110
…		…
78	The interface itself is vaguely similar, but not identical to the L<Event>	116	The interface itself is vaguely similar, but not identical to the L<Event>
79	module.	117	module.
80		118
81	During the first call of any watcher-creation method, the module tries	119	During the first call of any watcher-creation method, the module tries
82	to detect the currently loaded event loop by probing whether one of the	120	to detect the currently loaded event loop by probing whether one of the
83	following modules is already loaded: L<Coro::EV>, L<Coro::Event>, L<EV>,	121	following modules is already loaded: L<EV>,
84	L<Event>, L<Glib>, L<AnyEvent::Impl::Perl>, L<Tk>, L<Event::Lib>, L<Qt>,	122	L<Event>, L<Glib>, L<AnyEvent::Impl::Perl>, L<Tk>, L<Event::Lib>, L<Qt>,
85	L<POE>. The first one found is used. If none are found, the module tries	123	L<POE>. The first one found is used. If none are found, the module tries
86	to load these modules (excluding Tk, Event::Lib, Qt and POE as the pure perl	124	to load these modules (excluding Tk, Event::Lib, Qt and POE as the pure perl
87	adaptor should always succeed) in the order given. The first one that can	125	adaptor should always succeed) in the order given. The first one that can
88	be successfully loaded will be used. If, after this, still none could be	126	be successfully loaded will be used. If, after this, still none could be
…		…
102	starts using it, all bets are off. Maybe you should tell their authors to	140	starts using it, all bets are off. Maybe you should tell their authors to
103	use AnyEvent so their modules work together with others seamlessly...	141	use AnyEvent so their modules work together with others seamlessly...
104		142
105	The pure-perl implementation of AnyEvent is called	143	The pure-perl implementation of AnyEvent is called
106	C<AnyEvent::Impl::Perl>. Like other event modules you can load it	144	C<AnyEvent::Impl::Perl>. Like other event modules you can load it
107	explicitly.	145	explicitly and enjoy the high availability of that event loop :)
108		146
109	=head1 WATCHERS	147	=head1 WATCHERS
110		148
111	AnyEvent has the central concept of a I<watcher>, which is an object that	149	AnyEvent has the central concept of a I<watcher>, which is an object that
112	stores relevant data for each kind of event you are waiting for, such as	150	stores relevant data for each kind of event you are waiting for, such as
113	the callback to call, the filehandle to watch, etc.	151	the callback to call, the file handle to watch, etc.
114		152
115	These watchers are normal Perl objects with normal Perl lifetime. After	153	These watchers are normal Perl objects with normal Perl lifetime. After
116	creating a watcher it will immediately "watch" for events and invoke the	154	creating a watcher it will immediately "watch" for events and invoke the
117	callback when the event occurs (of course, only when the event model	155	callback when the event occurs (of course, only when the event model
118	is in control).	156	is in control).
119		157
		158	Note that B<callbacks must not permanently change global variables>
		159	potentially in use by the event loop (such as C<$_> or C<$[>) and that B<<
		160	callbacks must not C<die> >>. The former is good programming practise in
		161	Perl and the latter stems from the fact that exception handling differs
		162	widely between event loops.
		163
120	To disable the watcher you have to destroy it (e.g. by setting the	164	To disable the watcher you have to destroy it (e.g. by setting the
121	variable you store it in to C<undef> or otherwise deleting all references	165	variable you store it in to C<undef> or otherwise deleting all references
122	to it).	166	to it).
123		167
124	All watchers are created by calling a method on the C<AnyEvent> class.	168	All watchers are created by calling a method on the C<AnyEvent> class.
…		…
126	Many watchers either are used with "recursion" (repeating timers for	170	Many watchers either are used with "recursion" (repeating timers for
127	example), or need to refer to their watcher object in other ways.	171	example), or need to refer to their watcher object in other ways.
128		172
129	An any way to achieve that is this pattern:	173	An any way to achieve that is this pattern:
130		174
131	my $w; $w = AnyEvent->type (arg => value ..., cb => sub {	175	my $w; $w = AnyEvent->type (arg => value ..., cb => sub {
132	# you can use $w here, for example to undef it	176	# you can use $w here, for example to undef it
133	undef $w;	177	undef $w;
134	});	178	});
135		179
136	Note that C<my $w; $w => combination. This is necessary because in Perl,	180	Note that C<my $w; $w => combination. This is necessary because in Perl,
137	my variables are only visible after the statement in which they are	181	my variables are only visible after the statement in which they are
138	declared.	182	declared.
139		183
140	=head2 I/O WATCHERS	184	=head2 I/O WATCHERS
141		185
		186	$w = AnyEvent->io (
		187	fh => <filehandle_or_fileno>,
		188	poll => <"r" or "w">,
		189	cb => <callback>,
		190	);
		191
142	You can create an I/O watcher by calling the C<< AnyEvent->io >> method	192	You can create an I/O watcher by calling the C<< AnyEvent->io >> method
143	with the following mandatory key-value pairs as arguments:	193	with the following mandatory key-value pairs as arguments:
144		194
145	C<fh> the Perl I<file handle> (I<not> file descriptor) to watch	195	C<fh> is the Perl I<file handle> (or a naked file descriptor) to watch
		196	for events (AnyEvent might or might not keep a reference to this file
		197	handle). Note that only file handles pointing to things for which
		198	non-blocking operation makes sense are allowed. This includes sockets,
		199	most character devices, pipes, fifos and so on, but not for example files
		200	or block devices.
		201
146	for events. C<poll> must be a string that is either C<r> or C<w>,	202	C<poll> must be a string that is either C<r> or C<w>, which creates a
147	which creates a watcher waiting for "r"eadable or "w"ritable events,	203	watcher waiting for "r"eadable or "w"ritable events, respectively.
		204
148	respectively. C<cb> is the callback to invoke each time the file handle	205	C<cb> is the callback to invoke each time the file handle becomes ready.
149	becomes ready.
150		206
151	Although the callback might get passed parameters, their value and	207	Although the callback might get passed parameters, their value and
152	presence is undefined and you cannot rely on them. Portable AnyEvent	208	presence is undefined and you cannot rely on them. Portable AnyEvent
153	callbacks cannot use arguments passed to I/O watcher callbacks.	209	callbacks cannot use arguments passed to I/O watcher callbacks.
154		210
…		…
158		214
159	Some event loops issue spurious readyness notifications, so you should	215	Some event loops issue spurious readyness notifications, so you should
160	always use non-blocking calls when reading/writing from/to your file	216	always use non-blocking calls when reading/writing from/to your file
161	handles.	217	handles.
162		218
163	Example:
164
165	# wait for readability of STDIN, then read a line and disable the watcher	219	Example: wait for readability of STDIN, then read a line and disable the
		220	watcher.
		221
166	my $w; $w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {	222	my $w; $w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {
167	chomp (my $input = <STDIN>);	223	chomp (my $input = <STDIN>);
168	warn "read: $input\n";	224	warn "read: $input\n";
169	undef $w;	225	undef $w;
170	});	226	});
171		227
172	=head2 TIME WATCHERS	228	=head2 TIME WATCHERS
173		229
		230	$w = AnyEvent->timer (after => <seconds>, cb => <callback>);
		231
		232	$w = AnyEvent->timer (
		233	after => <fractional_seconds>,
		234	interval => <fractional_seconds>,
		235	cb => <callback>,
		236	);
		237
174	You can create a time watcher by calling the C<< AnyEvent->timer >>	238	You can create a time watcher by calling the C<< AnyEvent->timer >>
175	method with the following mandatory arguments:	239	method with the following mandatory arguments:
176		240
177	C<after> specifies after how many seconds (fractional values are	241	C<after> specifies after how many seconds (fractional values are
178	supported) the callback should be invoked. C<cb> is the callback to invoke	242	supported) the callback should be invoked. C<cb> is the callback to invoke
…		…
180		244
181	Although the callback might get passed parameters, their value and	245	Although the callback might get passed parameters, their value and
182	presence is undefined and you cannot rely on them. Portable AnyEvent	246	presence is undefined and you cannot rely on them. Portable AnyEvent
183	callbacks cannot use arguments passed to time watcher callbacks.	247	callbacks cannot use arguments passed to time watcher callbacks.
184		248
185	The timer callback will be invoked at most once: if you want a repeating	249	The callback will normally be invoked once only. If you specify another
186	timer you have to create a new watcher (this is a limitation by both Tk	250	parameter, C<interval>, as a strictly positive number (> 0), then the
187	and Glib).	251	callback will be invoked regularly at that interval (in fractional
		252	seconds) after the first invocation. If C<interval> is specified with a
		253	false value, then it is treated as if it were missing.
188		254
189	Example:	255	The callback will be rescheduled before invoking the callback, but no
		256	attempt is done to avoid timer drift in most backends, so the interval is
		257	only approximate.
190		258
191	# fire an event after 7.7 seconds	259	Example: fire an event after 7.7 seconds.
		260
192	my $w = AnyEvent->timer (after => 7.7, cb => sub {	261	my $w = AnyEvent->timer (after => 7.7, cb => sub {
193	warn "timeout\n";	262	warn "timeout\n";
194	});	263	});
195		264
196	# to cancel the timer:	265	# to cancel the timer:
197	undef $w;	266	undef $w;
198		267
199	Example 2:
200
201	# fire an event after 0.5 seconds, then roughly every second	268	Example 2: fire an event after 0.5 seconds, then roughly every second.
202	my $w;
203		269
204	my $cb = sub {
205	# cancel the old timer while creating a new one
206	$w = AnyEvent->timer (after => 1, cb => $cb);	270	my $w = AnyEvent->timer (after => 0.5, interval => 1, cb => sub {
		271	warn "timeout\n";
207	};	272	};
208
209	# start the "loop" by creating the first watcher
210	$w = AnyEvent->timer (after => 0.5, cb => $cb);
211		273
212	=head3 TIMING ISSUES	274	=head3 TIMING ISSUES
213		275
214	There are two ways to handle timers: based on real time (relative, "fire	276	There are two ways to handle timers: based on real time (relative, "fire
215	in 10 seconds") and based on wallclock time (absolute, "fire at 12	277	in 10 seconds") and based on wallclock time (absolute, "fire at 12
…		…
227	timers.	289	timers.
228		290
229	AnyEvent always prefers relative timers, if available, matching the	291	AnyEvent always prefers relative timers, if available, matching the
230	AnyEvent API.	292	AnyEvent API.
231		293
		294	AnyEvent has two additional methods that return the "current time":
		295
		296	=over 4
		297
		298	=item AnyEvent->time
		299
		300	This returns the "current wallclock time" as a fractional number of
		301	seconds since the Epoch (the same thing as C<time> or C<Time::HiRes::time>
		302	return, and the result is guaranteed to be compatible with those).
		303
		304	It progresses independently of any event loop processing, i.e. each call
		305	will check the system clock, which usually gets updated frequently.
		306
		307	=item AnyEvent->now
		308
		309	This also returns the "current wallclock time", but unlike C<time>, above,
		310	this value might change only once per event loop iteration, depending on
		311	the event loop (most return the same time as C<time>, above). This is the
		312	time that AnyEvent's timers get scheduled against.
		313
		314	I<In almost all cases (in all cases if you don't care), this is the
		315	function to call when you want to know the current time.>
		316
		317	This function is also often faster then C<< AnyEvent->time >>, and
		318	thus the preferred method if you want some timestamp (for example,
		319	L<AnyEvent::Handle> uses this to update it's activity timeouts).
		320
		321	The rest of this section is only of relevance if you try to be very exact
		322	with your timing, you can skip it without bad conscience.
		323
		324	For a practical example of when these times differ, consider L<Event::Lib>
		325	and L<EV> and the following set-up:
		326
		327	The event loop is running and has just invoked one of your callback at
		328	time=500 (assume no other callbacks delay processing). In your callback,
		329	you wait a second by executing C<sleep 1> (blocking the process for a
		330	second) and then (at time=501) you create a relative timer that fires
		331	after three seconds.
		332
		333	With L<Event::Lib>, C<< AnyEvent->time >> and C<< AnyEvent->now >> will
		334	both return C<501>, because that is the current time, and the timer will
		335	be scheduled to fire at time=504 (C<501> + C<3>).
		336
		337	With L<EV>, C<< AnyEvent->time >> returns C<501> (as that is the current
		338	time), but C<< AnyEvent->now >> returns C<500>, as that is the time the
		339	last event processing phase started. With L<EV>, your timer gets scheduled
		340	to run at time=503 (C<500> + C<3>).
		341
		342	In one sense, L<Event::Lib> is more exact, as it uses the current time
		343	regardless of any delays introduced by event processing. However, most
		344	callbacks do not expect large delays in processing, so this causes a
		345	higher drift (and a lot more system calls to get the current time).
		346
		347	In another sense, L<EV> is more exact, as your timer will be scheduled at
		348	the same time, regardless of how long event processing actually took.
		349
		350	In either case, if you care (and in most cases, you don't), then you
		351	can get whatever behaviour you want with any event loop, by taking the
		352	difference between C<< AnyEvent->time >> and C<< AnyEvent->now >> into
		353	account.
		354
		355	=item AnyEvent->now_update
		356
		357	Some event loops (such as L<EV> or L<AnyEvent::Impl::Perl>) cache
		358	the current time for each loop iteration (see the discussion of L<<
		359	AnyEvent->now >>, above).
		360
		361	When a callback runs for a long time (or when the process sleeps), then
		362	this "current" time will differ substantially from the real time, which
		363	might affect timers and time-outs.
		364
		365	When this is the case, you can call this method, which will update the
		366	event loop's idea of "current time".
		367
		368	Note that updating the time I<might> cause some events to be handled.
		369
		370	=back
		371
232	=head2 SIGNAL WATCHERS	372	=head2 SIGNAL WATCHERS
233		373
		374	$w = AnyEvent->signal (signal => <uppercase_signal_name>, cb => <callback>);
		375
234	You can watch for signals using a signal watcher, C<signal> is the signal	376	You can watch for signals using a signal watcher, C<signal> is the signal
235	I<name> without any C<SIG> prefix, C<cb> is the Perl callback to	377	I<name> in uppercase and without any C<SIG> prefix, C<cb> is the Perl
236	be invoked whenever a signal occurs.	378	callback to be invoked whenever a signal occurs.
237		379
238	Although the callback might get passed parameters, their value and	380	Although the callback might get passed parameters, their value and
239	presence is undefined and you cannot rely on them. Portable AnyEvent	381	presence is undefined and you cannot rely on them. Portable AnyEvent
240	callbacks cannot use arguments passed to signal watcher callbacks.	382	callbacks cannot use arguments passed to signal watcher callbacks.
241		383
242	Multiple signal occurances can be clumped together into one callback	384	Multiple signal occurrences can be clumped together into one callback
243	invocation, and callback invocation will be synchronous. synchronous means	385	invocation, and callback invocation will be synchronous. Synchronous means
244	that it might take a while until the signal gets handled by the process,	386	that it might take a while until the signal gets handled by the process,
245	but it is guarenteed not to interrupt any other callbacks.	387	but it is guaranteed not to interrupt any other callbacks.
246		388
247	The main advantage of using these watchers is that you can share a signal	389	The main advantage of using these watchers is that you can share a signal
248	between multiple watchers.	390	between multiple watchers, and AnyEvent will ensure that signals will not
		391	interrupt your program at bad times.
249		392
250	This watcher might use C<%SIG>, so programs overwriting those signals	393	This watcher might use C<%SIG> (depending on the event loop used),
251	directly will likely not work correctly.	394	so programs overwriting those signals directly will likely not work
		395	correctly.
252		396
253	Example: exit on SIGINT	397	Example: exit on SIGINT
254		398
255	my $w = AnyEvent->signal (signal => "INT", cb => sub { exit 1 });	399	my $w = AnyEvent->signal (signal => "INT", cb => sub { exit 1 });
256		400
		401	=head3 Signal Races, Delays and Workarounds
		402
		403	Many event loops (e.g. Glib, Tk, Qt, IO::Async) do not support attaching
		404	callbacks to signals in a generic way, which is a pity, as you cannot
		405	do race-free signal handling in perl, requiring C libraries for
		406	this. AnyEvent will try to do it's best, which means in some cases,
		407	signals will be delayed. The maximum time a signal might be delayed is
		408	specified in C<$AnyEvent::MAX_SIGNAL_LATENCY> (default: 10 seconds). This
		409	variable can be changed only before the first signal watcher is created,
		410	and should be left alone otherwise. This variable determines how often
		411	AnyEvent polls for signals (in case a wake-up was missed). Higher values
		412	will cause fewer spurious wake-ups, which is better for power and CPU
		413	saving.
		414
		415	All these problems can be avoided by installing the optional
		416	L<Async::Interrupt> module, which works with most event loops. It will not
		417	work with inherently broken event loops such as L<Event> or L<Event::Lib>
		418	(and not with L<POE> currently, as POE does it's own workaround with
		419	one-second latency). For those, you just have to suffer the delays.
		420
257	=head2 CHILD PROCESS WATCHERS	421	=head2 CHILD PROCESS WATCHERS
258		422
		423	$w = AnyEvent->child (pid => <process id>, cb => <callback>);
		424
259	You can also watch on a child process exit and catch its exit status.	425	You can also watch on a child process exit and catch its exit status.
260		426
261	The child process is specified by the C<pid> argument (if set to C<0>, it	427	The child process is specified by the C<pid> argument (one some backends,
262	watches for any child process exit). The watcher will trigger as often	428	using C<0> watches for any child process exit, on others this will
263	as status change for the child are received. This works by installing a	429	croak). The watcher will be triggered only when the child process has
264	signal handler for C<SIGCHLD>. The callback will be called with the pid	430	finished and an exit status is available, not on any trace events
265	and exit status (as returned by waitpid), so unlike other watcher types,	431	(stopped/continued).
266	you I<can> rely on child watcher callback arguments.	432
		433	The callback will be called with the pid and exit status (as returned by
		434	waitpid), so unlike other watcher types, you I<can> rely on child watcher
		435	callback arguments.
		436
		437	This watcher type works by installing a signal handler for C<SIGCHLD>,
		438	and since it cannot be shared, nothing else should use SIGCHLD or reap
		439	random child processes (waiting for specific child processes, e.g. inside
		440	C<system>, is just fine).
267		441
268	There is a slight catch to child watchers, however: you usually start them	442	There is a slight catch to child watchers, however: you usually start them
269	I<after> the child process was created, and this means the process could	443	I<after> the child process was created, and this means the process could
270	have exited already (and no SIGCHLD will be sent anymore).	444	have exited already (and no SIGCHLD will be sent anymore).
271		445
272	Not all event models handle this correctly (POE doesn't), but even for	446	Not all event models handle this correctly (neither POE nor IO::Async do,
		447	see their AnyEvent::Impl manpages for details), but even for event models
273	event models that I<do> handle this correctly, they usually need to be	448	that I<do> handle this correctly, they usually need to be loaded before
274	loaded before the process exits (i.e. before you fork in the first place).	449	the process exits (i.e. before you fork in the first place). AnyEvent's
		450	pure perl event loop handles all cases correctly regardless of when you
		451	start the watcher.
275		452
276	This means you cannot create a child watcher as the very first thing in an	453	This means you cannot create a child watcher as the very first
277	AnyEvent program, you I<have> to create at least one watcher before you	454	thing in an AnyEvent program, you I<have> to create at least one
278	C<fork> the child (alternatively, you can call C<AnyEvent::detect>).	455	watcher before you C<fork> the child (alternatively, you can call
		456	C<AnyEvent::detect>).
		457
		458	As most event loops do not support waiting for child events, they will be
		459	emulated by AnyEvent in most cases, in which the latency and race problems
		460	mentioned in the description of signal watchers apply.
279		461
280	Example: fork a process and wait for it	462	Example: fork a process and wait for it
281		463
282	my $done = AnyEvent->condvar;	464	my $done = AnyEvent->condvar;
283		465
284	AnyEvent::detect; # force event module to be initialised
285
286	my $pid = fork or exit 5;	466	my $pid = fork or exit 5;
287		467
288	my $w = AnyEvent->child (	468	my $w = AnyEvent->child (
289	pid => $pid,	469	pid => $pid,
290	cb => sub {	470	cb => sub {
291	my ($pid, $status) = @_;	471	my ($pid, $status) = @_;
292	warn "pid $pid exited with status $status";	472	warn "pid $pid exited with status $status";
293	$done->broadcast;	473	$done->send;
294	},	474	},
295	);	475	);
296		476
297	# do something else, then wait for process exit	477	# do something else, then wait for process exit
298	$done->wait;	478	$done->recv;
		479
		480	=head2 IDLE WATCHERS
		481
		482	$w = AnyEvent->idle (cb => <callback>);
		483
		484	Sometimes there is a need to do something, but it is not so important
		485	to do it instantly, but only when there is nothing better to do. This
		486	"nothing better to do" is usually defined to be "no other events need
		487	attention by the event loop".
		488
		489	Idle watchers ideally get invoked when the event loop has nothing
		490	better to do, just before it would block the process to wait for new
		491	events. Instead of blocking, the idle watcher is invoked.
		492
		493	Most event loops unfortunately do not really support idle watchers (only
		494	EV, Event and Glib do it in a usable fashion) - for the rest, AnyEvent
		495	will simply call the callback "from time to time".
		496
		497	Example: read lines from STDIN, but only process them when the
		498	program is otherwise idle:
		499
		500	my @lines; # read data
		501	my $idle_w;
		502	my $io_w = AnyEvent->io (fh => \*STDIN, poll => 'r', cb => sub {
		503	push @lines, scalar <STDIN>;
		504
		505	# start an idle watcher, if not already done
		506	$idle_w ||= AnyEvent->idle (cb => sub {
		507	# handle only one line, when there are lines left
		508	if (my $line = shift @lines) {
		509	print "handled when idle: $line";
		510	} else {
		511	# otherwise disable the idle watcher again
		512	undef $idle_w;
		513	}
		514	});
		515	});
299		516
300	=head2 CONDITION VARIABLES	517	=head2 CONDITION VARIABLES
		518
		519	$cv = AnyEvent->condvar;
		520
		521	$cv->send (<list>);
		522	my @res = $cv->recv;
301		523
302	If you are familiar with some event loops you will know that all of them	524	If you are familiar with some event loops you will know that all of them
303	require you to run some blocking "loop", "run" or similar function that	525	require you to run some blocking "loop", "run" or similar function that
304	will actively watch for new events and call your callbacks.	526	will actively watch for new events and call your callbacks.
305		527
306	AnyEvent is different, it expects somebody else to run the event loop and	528	AnyEvent is slightly different: it expects somebody else to run the event
307	will only block when necessary (usually when told by the user).	529	loop and will only block when necessary (usually when told by the user).
308		530
309	The instrument to do that is called a "condition variable", so called	531	The instrument to do that is called a "condition variable", so called
310	because they represent a condition that must become true.	532	because they represent a condition that must become true.
		533
		534	Now is probably a good time to look at the examples further below.
311		535
312	Condition variables can be created by calling the C<< AnyEvent->condvar	536	Condition variables can be created by calling the C<< AnyEvent->condvar
313	>> method, usually without arguments. The only argument pair allowed is	537	>> method, usually without arguments. The only argument pair allowed is
314	C<cb>, which specifies a callback to be called when the condition variable	538	C<cb>, which specifies a callback to be called when the condition variable
315	becomes true.	539	becomes true, with the condition variable as the first argument (but not
		540	the results).
316		541
317	After creation, the conditon variable is "false" until it becomes "true"	542	After creation, the condition variable is "false" until it becomes "true"
318	by calling the C<broadcast> method.	543	by calling the C<send> method (or calling the condition variable as if it
		544	were a callback, read about the caveats in the description for the C<<
		545	->send >> method).
319		546
320	Condition variables are similar to callbacks, except that you can	547	Condition variables are similar to callbacks, except that you can
321	optionally wait for them. They can also be called merge points - points	548	optionally wait for them. They can also be called merge points - points
322	in time where multiple outstandign events have been processed. And yet	549	in time where multiple outstanding events have been processed. And yet
323	another way to call them is transations - each condition variable can be	550	another way to call them is transactions - each condition variable can be
324	used to represent a transaction, which finishes at some point and delivers	551	used to represent a transaction, which finishes at some point and delivers
325	a result.	552	a result. And yet some people know them as "futures" - a promise to
		553	compute/deliver something that you can wait for.
326		554
327	Condition variables are very useful to signal that something has finished,	555	Condition variables are very useful to signal that something has finished,
328	for example, if you write a module that does asynchronous http requests,	556	for example, if you write a module that does asynchronous http requests,
329	then a condition variable would be the ideal candidate to signal the	557	then a condition variable would be the ideal candidate to signal the
330	availability of results. The user can either act when the callback is	558	availability of results. The user can either act when the callback is
331	called or can synchronously C<< ->wait >> for the results.	559	called or can synchronously C<< ->recv >> for the results.
332		560
333	You can also use them to simulate traditional event loops - for example,	561	You can also use them to simulate traditional event loops - for example,
334	you can block your main program until an event occurs - for example, you	562	you can block your main program until an event occurs - for example, you
335	could C<< ->wait >> in your main program until the user clicks the Quit	563	could C<< ->recv >> in your main program until the user clicks the Quit
336	button of your app, which would C<< ->broadcast >> the "quit" event.	564	button of your app, which would C<< ->send >> the "quit" event.
337		565
338	Note that condition variables recurse into the event loop - if you have	566	Note that condition variables recurse into the event loop - if you have
339	two pieces of code that call C<< ->wait >> in a round-robbin fashion, you	567	two pieces of code that call C<< ->recv >> in a round-robin fashion, you
340	lose. Therefore, condition variables are good to export to your caller, but	568	lose. Therefore, condition variables are good to export to your caller, but
341	you should avoid making a blocking wait yourself, at least in callbacks,	569	you should avoid making a blocking wait yourself, at least in callbacks,
342	as this asks for trouble.	570	as this asks for trouble.
343		571
344	Condition variables are represented by hash refs in perl, and the keys	572	Condition variables are represented by hash refs in perl, and the keys
…		…
346	easy (it is often useful to build your own transaction class on top of	574	easy (it is often useful to build your own transaction class on top of
347	AnyEvent). To subclass, use C<AnyEvent::CondVar> as base class and call	575	AnyEvent). To subclass, use C<AnyEvent::CondVar> as base class and call
348	it's C<new> method in your own C<new> method.	576	it's C<new> method in your own C<new> method.
349		577
350	There are two "sides" to a condition variable - the "producer side" which	578	There are two "sides" to a condition variable - the "producer side" which
351	eventually calls C<< -> broadcast >>, and the "consumer side", which waits	579	eventually calls C<< -> send >>, and the "consumer side", which waits
352	for the broadcast to occur.	580	for the send to occur.
353		581
354	Example:	582	Example: wait for a timer.
355		583
356	# wait till the result is ready	584	# wait till the result is ready
357	my $result_ready = AnyEvent->condvar;	585	my $result_ready = AnyEvent->condvar;
358		586
359	# do something such as adding a timer	587	# do something such as adding a timer
360	# or socket watcher the calls $result_ready->broadcast	588	# or socket watcher the calls $result_ready->send
361	# when the "result" is ready.	589	# when the "result" is ready.
362	# in this case, we simply use a timer:	590	# in this case, we simply use a timer:
363	my $w = AnyEvent->timer (	591	my $w = AnyEvent->timer (
364	after => 1,	592	after => 1,
365	cb => sub { $result_ready->broadcast },	593	cb => sub { $result_ready->send },
366	);	594	);
367		595
368	# this "blocks" (while handling events) till the callback	596	# this "blocks" (while handling events) till the callback
369	# calls broadcast	597	# calls -<send
370	$result_ready->wait;	598	$result_ready->recv;
		599
		600	Example: wait for a timer, but take advantage of the fact that condition
		601	variables are also callable directly.
		602
		603	my $done = AnyEvent->condvar;
		604	my $delay = AnyEvent->timer (after => 5, cb => $done);
		605	$done->recv;
		606
		607	Example: Imagine an API that returns a condvar and doesn't support
		608	callbacks. This is how you make a synchronous call, for example from
		609	the main program:
		610
		611	use AnyEvent::CouchDB;
		612
		613	...
		614
		615	my @info = $couchdb->info->recv;
		616
		617	And this is how you would just set a callback to be called whenever the
		618	results are available:
		619
		620	$couchdb->info->cb (sub {
		621	my @info = $_[0]->recv;
		622	});
371		623
372	=head3 METHODS FOR PRODUCERS	624	=head3 METHODS FOR PRODUCERS
373		625
374	These methods should only be used by the producing side, i.e. the	626	These methods should only be used by the producing side, i.e. the
375	code/module that eventually broadcasts the signal. Note that it is also	627	code/module that eventually sends the signal. Note that it is also
376	the producer side which creates the condvar in most cases, but it isn't	628	the producer side which creates the condvar in most cases, but it isn't
377	uncommon for the consumer to create it as well.	629	uncommon for the consumer to create it as well.
378		630
379	=over 4	631	=over 4
380		632
381	=item $cv->broadcast (...)	633	=item $cv->send (...)
382		634
383	Flag the condition as ready - a running C<< ->wait >> and all further	635	Flag the condition as ready - a running C<< ->recv >> and all further
384	calls to C<wait> will (eventually) return after this method has been	636	calls to C<recv> will (eventually) return after this method has been
385	called. If nobody is waiting the broadcast will be remembered.	637	called. If nobody is waiting the send will be remembered.
386		638
387	If a callback has been set on the condition variable, it is called	639	If a callback has been set on the condition variable, it is called
388	immediately from within broadcast.	640	immediately from within send.
389		641
390	Any arguments passed to the C<broadcast> call will be returned by all	642	Any arguments passed to the C<send> call will be returned by all
391	future C<< ->wait >> calls.	643	future C<< ->recv >> calls.
		644
		645	Condition variables are overloaded so one can call them directly (as if
		646	they were a code reference). Calling them directly is the same as calling
		647	C<send>.
392		648
393	=item $cv->croak ($error)	649	=item $cv->croak ($error)
394		650
395	Similar to broadcast, but causes all call's wait C<< ->wait >> to invoke	651	Similar to send, but causes all call's to C<< ->recv >> to invoke
396	C<Carp::croak> with the given error message/object/scalar.	652	C<Carp::croak> with the given error message/object/scalar.
397		653
398	This can be used to signal any errors to the condition variable	654	This can be used to signal any errors to the condition variable
399	user/consumer.	655	user/consumer. Doing it this way instead of calling C<croak> directly
		656	delays the error detetcion, but has the overwhelmign advantage that it
		657	diagnoses the error at the place where the result is expected, and not
		658	deep in some event clalback without connection to the actual code causing
		659	the problem.
400		660
401	=item $cv->begin ([group callback])	661	=item $cv->begin ([group callback])
402		662
403	=item $cv->end	663	=item $cv->end
404		664
…		…
407	to use a condition variable for the whole process.	667	to use a condition variable for the whole process.
408		668
409	Every call to C<< ->begin >> will increment a counter, and every call to	669	Every call to C<< ->begin >> will increment a counter, and every call to
410	C<< ->end >> will decrement it. If the counter reaches C<0> in C<< ->end	670	C<< ->end >> will decrement it. If the counter reaches C<0> in C<< ->end
411	>>, the (last) callback passed to C<begin> will be executed. That callback	671	>>, the (last) callback passed to C<begin> will be executed. That callback
412	is I<supposed> to call C<< ->broadcast >>, but that is not required. If no	672	is I<supposed> to call C<< ->send >>, but that is not required. If no
413	callback was set, C<broadcast> will be called without any arguments.	673	callback was set, C<send> will be called without any arguments.
414		674
415	Let's clarify this with the ping example:	675	You can think of C<< $cv->send >> giving you an OR condition (one call
		676	sends), while C<< $cv->begin >> and C<< $cv->end >> giving you an AND
		677	condition (all C<begin> calls must be C<end>'ed before the condvar sends).
		678
		679	Let's start with a simple example: you have two I/O watchers (for example,
		680	STDOUT and STDERR for a program), and you want to wait for both streams to
		681	close before activating a condvar:
416		682
417	my $cv = AnyEvent->condvar;	683	my $cv = AnyEvent->condvar;
418		684
		685	$cv->begin; # first watcher
		686	my $w1 = AnyEvent->io (fh => $fh1, cb => sub {
		687	defined sysread $fh1, my $buf, 4096
		688	or $cv->end;
		689	});
		690
		691	$cv->begin; # second watcher
		692	my $w2 = AnyEvent->io (fh => $fh2, cb => sub {
		693	defined sysread $fh2, my $buf, 4096
		694	or $cv->end;
		695	});
		696
		697	$cv->recv;
		698
		699	This works because for every event source (EOF on file handle), there is
		700	one call to C<begin>, so the condvar waits for all calls to C<end> before
		701	sending.
		702
		703	The ping example mentioned above is slightly more complicated, as the
		704	there are results to be passwd back, and the number of tasks that are
		705	begung can potentially be zero:
		706
		707	my $cv = AnyEvent->condvar;
		708
419	my %result;	709	my %result;
420	$cv->begin (sub { $cv->broadcast (\%result) });	710	$cv->begin (sub { $cv->send (\%result) });
421		711
422	for my $host (@list_of_hosts) {	712	for my $host (@list_of_hosts) {
423	$cv->begin;	713	$cv->begin;
424	ping_host_then_call_callback $host, sub {	714	ping_host_then_call_callback $host, sub {
425	$result{$host} = ...;	715	$result{$host} = ...;
…		…
428	}	718	}
429		719
430	$cv->end;	720	$cv->end;
431		721
432	This code fragment supposedly pings a number of hosts and calls	722	This code fragment supposedly pings a number of hosts and calls
433	C<broadcast> after results for all then have have been gathered - in any	723	C<send> after results for all then have have been gathered - in any
434	order. To achieve this, the code issues a call to C<begin> when it starts	724	order. To achieve this, the code issues a call to C<begin> when it starts
435	each ping request and calls C<end> when it has received some result for	725	each ping request and calls C<end> when it has received some result for
436	it. Since C<begin> and C<end> only maintain a counter, the order in which	726	it. Since C<begin> and C<end> only maintain a counter, the order in which
437	results arrive is not relevant.	727	results arrive is not relevant.
438		728
439	There is an additional bracketing call to C<begin> and C<end> outside the	729	There is an additional bracketing call to C<begin> and C<end> outside the
440	loop, which serves two important purposes: first, it sets the callback	730	loop, which serves two important purposes: first, it sets the callback
441	to be called once the counter reaches C<0>, and second, it ensures that	731	to be called once the counter reaches C<0>, and second, it ensures that
442	broadcast is called even when C<no> hosts are being pinged (the loop	732	C<send> is called even when C<no> hosts are being pinged (the loop
443	doesn't execute once).	733	doesn't execute once).
444		734
445	This is the general pattern when you "fan out" into multiple subrequests:	735	This is the general pattern when you "fan out" into multiple (but
446	use an outer C<begin>/C<end> pair to set the callback and ensure C<end>	736	potentially none) subrequests: use an outer C<begin>/C<end> pair to set
447	is called at least once, and then, for each subrequest you start, call	737	the callback and ensure C<end> is called at least once, and then, for each
448	C<begin> and for eahc subrequest you finish, call C<end>.	738	subrequest you start, call C<begin> and for each subrequest you finish,
		739	call C<end>.
449		740
450	=back	741	=back
451		742
452	=head3 METHODS FOR CONSUMERS	743	=head3 METHODS FOR CONSUMERS
453		744
454	These methods should only be used by the consuming side, i.e. the	745	These methods should only be used by the consuming side, i.e. the
455	code awaits the condition.	746	code awaits the condition.
456		747
457	=item $cv->wait	748	=over 4
458		749
		750	=item $cv->recv
		751
459	Wait (blocking if necessary) until the C<< ->broadcast >> or C<< ->croak	752	Wait (blocking if necessary) until the C<< ->send >> or C<< ->croak
460	>> methods have been called on c<$cv>, while servicing other watchers	753	>> methods have been called on c<$cv>, while servicing other watchers
461	normally.	754	normally.
462		755
463	You can only wait once on a condition - additional calls are valid but	756	You can only wait once on a condition - additional calls are valid but
464	will return immediately.	757	will return immediately.
465		758
466	If an error condition has been set by calling C<< ->croak >>, then this	759	If an error condition has been set by calling C<< ->croak >>, then this
467	function will call C<croak>.	760	function will call C<croak>.
468		761
469	In list context, all parameters passed to C<broadcast> will be returned,	762	In list context, all parameters passed to C<send> will be returned,
470	in scalar context only the first one will be returned.	763	in scalar context only the first one will be returned.
		764
		765	Note that doing a blocking wait in a callback is not supported by any
		766	event loop, that is, recursive invocation of a blocking C<< ->recv
		767	>> is not allowed, and the C<recv> call will C<croak> if such a
		768	condition is detected. This condition can be slightly loosened by using
		769	L<Coro::AnyEvent>, which allows you to do a blocking C<< ->recv >> from
		770	any thread that doesn't run the event loop itself.
471		771
472	Not all event models support a blocking wait - some die in that case	772	Not all event models support a blocking wait - some die in that case
473	(programs might want to do that to stay interactive), so I<if you are	773	(programs might want to do that to stay interactive), so I<if you are
474	using this from a module, never require a blocking wait>, but let the	774	using this from a module, never require a blocking wait>. Instead, let the
475	caller decide whether the call will block or not (for example, by coupling	775	caller decide whether the call will block or not (for example, by coupling
476	condition variables with some kind of request results and supporting	776	condition variables with some kind of request results and supporting
477	callbacks so the caller knows that getting the result will not block,	777	callbacks so the caller knows that getting the result will not block,
478	while still suppporting blocking waits if the caller so desires).	778	while still supporting blocking waits if the caller so desires).
479		779
480	Another reason I<never> to C<< ->wait >> in a module is that you cannot
481	sensibly have two C<< ->wait >>'s in parallel, as that would require
482	multiple interpreters or coroutines/threads, none of which C<AnyEvent>
483	can supply (the coroutine-aware backends L<AnyEvent::Impl::CoroEV> and
484	L<AnyEvent::Impl::CoroEvent> explicitly support concurrent C<< ->wait >>'s
485	from different coroutines, however).
486
487	You can ensure that C<< -wait >> never blocks by setting a callback and	780	You can ensure that C<< -recv >> never blocks by setting a callback and
488	only calling C<< ->wait >> from within that callback (or at a later	781	only calling C<< ->recv >> from within that callback (or at a later
489	time). This will work even when the event loop does not support blocking	782	time). This will work even when the event loop does not support blocking
490	waits otherwise.	783	waits otherwise.
491		784
		785	=item $bool = $cv->ready
		786
		787	Returns true when the condition is "true", i.e. whether C<send> or
		788	C<croak> have been called.
		789
		790	=item $cb = $cv->cb ($cb->($cv))
		791
		792	This is a mutator function that returns the callback set and optionally
		793	replaces it before doing so.
		794
		795	The callback will be called when the condition becomes (or already was)
		796	"true", i.e. when C<send> or C<croak> are called (or were called), with
		797	the only argument being the condition variable itself. Calling C<recv>
		798	inside the callback or at any later time is guaranteed not to block.
		799
492	=back	800	=back
493		801
		802	=head1 SUPPORTED EVENT LOOPS/BACKENDS
		803
		804	The available backend classes are (every class has its own manpage):
		805
		806	=over 4
		807
		808	=item Backends that are autoprobed when no other event loop can be found.
		809
		810	EV is the preferred backend when no other event loop seems to be in
		811	use. If EV is not installed, then AnyEvent will try Event, and, failing
		812	that, will fall back to its own pure-perl implementation, which is
		813	available everywhere as it comes with AnyEvent itself.
		814
		815	AnyEvent::Impl::EV based on EV (interface to libev, best choice).
		816	AnyEvent::Impl::Event based on Event, very stable, few glitches.
		817	AnyEvent::Impl::Perl pure-perl implementation, fast and portable.
		818
		819	=item Backends that are transparently being picked up when they are used.
		820
		821	These will be used when they are currently loaded when the first watcher
		822	is created, in which case it is assumed that the application is using
		823	them. This means that AnyEvent will automatically pick the right backend
		824	when the main program loads an event module before anything starts to
		825	create watchers. Nothing special needs to be done by the main program.
		826
		827	AnyEvent::Impl::Glib based on Glib, slow but very stable.
		828	AnyEvent::Impl::Tk based on Tk, very broken.
		829	AnyEvent::Impl::EventLib based on Event::Lib, leaks memory and worse.
		830	AnyEvent::Impl::POE based on POE, very slow, some limitations.
		831	AnyEvent::Impl::Irssi used when running within irssi.
		832
		833	=item Backends with special needs.
		834
		835	Qt requires the Qt::Application to be instantiated first, but will
		836	otherwise be picked up automatically. As long as the main program
		837	instantiates the application before any AnyEvent watchers are created,
		838	everything should just work.
		839
		840	AnyEvent::Impl::Qt based on Qt.
		841
		842	Support for IO::Async can only be partial, as it is too broken and
		843	architecturally limited to even support the AnyEvent API. It also
		844	is the only event loop that needs the loop to be set explicitly, so
		845	it can only be used by a main program knowing about AnyEvent. See
		846	L<AnyEvent::Impl::Async> for the gory details.
		847
		848	AnyEvent::Impl::IOAsync based on IO::Async, cannot be autoprobed.
		849
		850	=item Event loops that are indirectly supported via other backends.
		851
		852	Some event loops can be supported via other modules:
		853
		854	There is no direct support for WxWidgets (L<Wx>) or L<Prima>.
		855
		856	B<WxWidgets> has no support for watching file handles. However, you can
		857	use WxWidgets through the POE adaptor, as POE has a Wx backend that simply
		858	polls 20 times per second, which was considered to be too horrible to even
		859	consider for AnyEvent.
		860
		861	B<Prima> is not supported as nobody seems to be using it, but it has a POE
		862	backend, so it can be supported through POE.
		863
		864	AnyEvent knows about both L<Prima> and L<Wx>, however, and will try to
		865	load L<POE> when detecting them, in the hope that POE will pick them up,
		866	in which case everything will be automatic.
		867
		868	=back
		869
494	=head1 GLOBAL VARIABLES AND FUNCTIONS	870	=head1 GLOBAL VARIABLES AND FUNCTIONS
495		871
		872	These are not normally required to use AnyEvent, but can be useful to
		873	write AnyEvent extension modules.
		874
496	=over 4	875	=over 4
497		876
498	=item $AnyEvent::MODEL	877	=item $AnyEvent::MODEL
499		878
500	Contains C<undef> until the first watcher is being created. Then it	879	Contains C<undef> until the first watcher is being created, before the
		880	backend has been autodetected.
		881
501	contains the event model that is being used, which is the name of the	882	Afterwards it contains the event model that is being used, which is the
502	Perl class implementing the model. This class is usually one of the	883	name of the Perl class implementing the model. This class is usually one
503	C<AnyEvent::Impl:xxx> modules, but can be any other class in the case	884	of the C<AnyEvent::Impl:xxx> modules, but can be any other class in the
504	AnyEvent has been extended at runtime (e.g. in I<rxvt-unicode>).	885	case AnyEvent has been extended at runtime (e.g. in I<rxvt-unicode> it
505		886	will be C<urxvt::anyevent>).
506	The known classes so far are:
507
508	AnyEvent::Impl::CoroEV based on Coro::EV, best choice.
509	AnyEvent::Impl::CoroEvent based on Coro::Event, second best choice.
510	AnyEvent::Impl::EV based on EV (an interface to libev, best choice).
511	AnyEvent::Impl::Event based on Event, second best choice.
512	AnyEvent::Impl::Perl pure-perl implementation, fast and portable.
513	AnyEvent::Impl::Glib based on Glib, third-best choice.
514	AnyEvent::Impl::Tk based on Tk, very bad choice.
515	AnyEvent::Impl::Qt based on Qt, cannot be autoprobed (see its docs).
516	AnyEvent::Impl::EventLib based on Event::Lib, leaks memory and worse.
517	AnyEvent::Impl::POE based on POE, not generic enough for full support.
518
519	There is no support for WxWidgets, as WxWidgets has no support for
520	watching file handles. However, you can use WxWidgets through the
521	POE Adaptor, as POE has a Wx backend that simply polls 20 times per
522	second, which was considered to be too horrible to even consider for
523	AnyEvent. Likewise, other POE backends can be used by AnyEvent by using
524	it's adaptor.
525
526	AnyEvent knows about L<Prima> and L<Wx> and will try to use L<POE> when
527	autodetecting them.
528		887
529	=item AnyEvent::detect	888	=item AnyEvent::detect
530		889
531	Returns C<$AnyEvent::MODEL>, forcing autodetection of the event model	890	Returns C<$AnyEvent::MODEL>, forcing autodetection of the event model
532	if necessary. You should only call this function right before you would	891	if necessary. You should only call this function right before you would
533	have created an AnyEvent watcher anyway, that is, as late as possible at	892	have created an AnyEvent watcher anyway, that is, as late as possible at
534	runtime.	893	runtime, and not e.g. while initialising of your module.
		894
		895	If you need to do some initialisation before AnyEvent watchers are
		896	created, use C<post_detect>.
		897
		898	=item $guard = AnyEvent::post_detect { BLOCK }
		899
		900	Arranges for the code block to be executed as soon as the event model is
		901	autodetected (or immediately if this has already happened).
		902
		903	The block will be executed I<after> the actual backend has been detected
		904	(C<$AnyEvent::MODEL> is set), but I<before> any watchers have been
		905	created, so it is possible to e.g. patch C<@AnyEvent::ISA> or do
		906	other initialisations - see the sources of L<AnyEvent::Strict> or
		907	L<AnyEvent::AIO> to see how this is used.
		908
		909	The most common usage is to create some global watchers, without forcing
		910	event module detection too early, for example, L<AnyEvent::AIO> creates
		911	and installs the global L<IO::AIO> watcher in a C<post_detect> block to
		912	avoid autodetecting the event module at load time.
		913
		914	If called in scalar or list context, then it creates and returns an object
		915	that automatically removes the callback again when it is destroyed (or
		916	C<undef> when the hook was immediately executed). See L<AnyEvent::AIO> for
		917	a case where this is useful.
		918
		919	Example: Create a watcher for the IO::AIO module and store it in
		920	C<$WATCHER>. Only do so after the event loop is initialised, though.
		921
		922	our WATCHER;
		923
		924	my $guard = AnyEvent::post_detect {
		925	$WATCHER = AnyEvent->io (fh => IO::AIO::poll_fileno, poll => 'r', cb => \&IO::AIO::poll_cb);
		926	};
		927
		928	# the ||= is important in case post_detect immediately runs the block,
		929	# as to not clobber the newly-created watcher. assigning both watcher and
		930	# post_detect guard to the same variable has the advantage of users being
		931	# able to just C<undef $WATCHER> if the watcher causes them grief.
		932
		933	$WATCHER ||= $guard;
		934
		935	=item @AnyEvent::post_detect
		936
		937	If there are any code references in this array (you can C<push> to it
		938	before or after loading AnyEvent), then they will called directly after
		939	the event loop has been chosen.
		940
		941	You should check C<$AnyEvent::MODEL> before adding to this array, though:
		942	if it is defined then the event loop has already been detected, and the
		943	array will be ignored.
		944
		945	Best use C<AnyEvent::post_detect { BLOCK }> when your application allows
		946	it,as it takes care of these details.
		947
		948	This variable is mainly useful for modules that can do something useful
		949	when AnyEvent is used and thus want to know when it is initialised, but do
		950	not need to even load it by default. This array provides the means to hook
		951	into AnyEvent passively, without loading it.
535		952
536	=back	953	=back
537		954
538	=head1 WHAT TO DO IN A MODULE	955	=head1 WHAT TO DO IN A MODULE
539		956
…		…
543	Be careful when you create watchers in the module body - AnyEvent will	960	Be careful when you create watchers in the module body - AnyEvent will
544	decide which event module to use as soon as the first method is called, so	961	decide which event module to use as soon as the first method is called, so
545	by calling AnyEvent in your module body you force the user of your module	962	by calling AnyEvent in your module body you force the user of your module
546	to load the event module first.	963	to load the event module first.
547		964
548	Never call C<< ->wait >> on a condition variable unless you I<know> that	965	Never call C<< ->recv >> on a condition variable unless you I<know> that
549	the C<< ->broadcast >> method has been called on it already. This is	966	the C<< ->send >> method has been called on it already. This is
550	because it will stall the whole program, and the whole point of using	967	because it will stall the whole program, and the whole point of using
551	events is to stay interactive.	968	events is to stay interactive.
552		969
553	It is fine, however, to call C<< ->wait >> when the user of your module	970	It is fine, however, to call C<< ->recv >> when the user of your module
554	requests it (i.e. if you create a http request object ad have a method	971	requests it (i.e. if you create a http request object ad have a method
555	called C<results> that returns the results, it should call C<< ->wait >>	972	called C<results> that returns the results, it should call C<< ->recv >>
556	freely, as the user of your module knows what she is doing. always).	973	freely, as the user of your module knows what she is doing. always).
557		974
558	=head1 WHAT TO DO IN THE MAIN PROGRAM	975	=head1 WHAT TO DO IN THE MAIN PROGRAM
559		976
560	There will always be a single main program - the only place that should	977	There will always be a single main program - the only place that should
…		…
562		979
563	If it doesn't care, it can just "use AnyEvent" and use it itself, or not	980	If it doesn't care, it can just "use AnyEvent" and use it itself, or not
564	do anything special (it does not need to be event-based) and let AnyEvent	981	do anything special (it does not need to be event-based) and let AnyEvent
565	decide which implementation to chose if some module relies on it.	982	decide which implementation to chose if some module relies on it.
566		983
567	If the main program relies on a specific event model. For example, in	984	If the main program relies on a specific event model - for example, in
568	Gtk2 programs you have to rely on the Glib module. You should load the	985	Gtk2 programs you have to rely on the Glib module - you should load the
569	event module before loading AnyEvent or any module that uses it: generally	986	event module before loading AnyEvent or any module that uses it: generally
570	speaking, you should load it as early as possible. The reason is that	987	speaking, you should load it as early as possible. The reason is that
571	modules might create watchers when they are loaded, and AnyEvent will	988	modules might create watchers when they are loaded, and AnyEvent will
572	decide on the event model to use as soon as it creates watchers, and it	989	decide on the event model to use as soon as it creates watchers, and it
573	might chose the wrong one unless you load the correct one yourself.	990	might chose the wrong one unless you load the correct one yourself.
574		991
575	You can chose to use a rather inefficient pure-perl implementation by	992	You can chose to use a pure-perl implementation by loading the
576	loading the C<AnyEvent::Impl::Perl> module, which gives you similar	993	C<AnyEvent::Impl::Perl> module, which gives you similar behaviour
577	behaviour everywhere, but letting AnyEvent chose is generally better.	994	everywhere, but letting AnyEvent chose the model is generally better.
		995
		996	=head2 MAINLOOP EMULATION
		997
		998	Sometimes (often for short test scripts, or even standalone programs who
		999	only want to use AnyEvent), you do not want to run a specific event loop.
		1000
		1001	In that case, you can use a condition variable like this:
		1002
		1003	AnyEvent->condvar->recv;
		1004
		1005	This has the effect of entering the event loop and looping forever.
		1006
		1007	Note that usually your program has some exit condition, in which case
		1008	it is better to use the "traditional" approach of storing a condition
		1009	variable somewhere, waiting for it, and sending it when the program should
		1010	exit cleanly.
		1011
578		1012
579	=head1 OTHER MODULES	1013	=head1 OTHER MODULES
580		1014
581	The following is a non-exhaustive list of additional modules that use	1015	The following is a non-exhaustive list of additional modules that use
582	AnyEvent and can therefore be mixed easily with other AnyEvent modules	1016	AnyEvent as a client and can therefore be mixed easily with other AnyEvent
583	in the same program. Some of the modules come with AnyEvent, some are	1017	modules and other event loops in the same program. Some of the modules
584	available via CPAN.	1018	come with AnyEvent, most are available via CPAN.
585		1019
586	=over 4	1020	=over 4
587		1021
588	=item L<AnyEvent::Util>	1022	=item L<AnyEvent::Util>
589		1023
590	Contains various utility functions that replace often-used but blocking	1024	Contains various utility functions that replace often-used but blocking
591	functions such as C<inet_aton> by event-/callback-based versions.	1025	functions such as C<inet_aton> by event-/callback-based versions.
592		1026
		1027	=item L<AnyEvent::Socket>
		1028
		1029	Provides various utility functions for (internet protocol) sockets,
		1030	addresses and name resolution. Also functions to create non-blocking tcp
		1031	connections or tcp servers, with IPv6 and SRV record support and more.
		1032
593	=item L<AnyEvent::Handle>	1033	=item L<AnyEvent::Handle>
594		1034
595	Provide read and write buffers and manages watchers for reads and writes.	1035	Provide read and write buffers, manages watchers for reads and writes,
		1036	supports raw and formatted I/O, I/O queued and fully transparent and
		1037	non-blocking SSL/TLS (via L<AnyEvent::TLS>.
596		1038
597	=item L<AnyEvent::Socket>	1039	=item L<AnyEvent::DNS>
598		1040
599	Provides a means to do non-blocking connects, accepts etc.	1041	Provides rich asynchronous DNS resolver capabilities.
		1042
		1043	=item L<AnyEvent::HTTP>
		1044
		1045	A simple-to-use HTTP library that is capable of making a lot of concurrent
		1046	HTTP requests.
600		1047
601	=item L<AnyEvent::HTTPD>	1048	=item L<AnyEvent::HTTPD>
602		1049
603	Provides a simple web application server framework.	1050	Provides a simple web application server framework.
604		1051
605	=item L<AnyEvent::DNS>
606
607	Provides asynchronous DNS resolver capabilities, beyond what
608	L<AnyEvent::Util> offers.
609
610	=item L<AnyEvent::FastPing>	1052	=item L<AnyEvent::FastPing>
611		1053
612	The fastest ping in the west.	1054	The fastest ping in the west.
613		1055
		1056	=item L<AnyEvent::DBI>
		1057
		1058	Executes L<DBI> requests asynchronously in a proxy process.
		1059
		1060	=item L<AnyEvent::AIO>
		1061
		1062	Truly asynchronous I/O, should be in the toolbox of every event
		1063	programmer. AnyEvent::AIO transparently fuses L<IO::AIO> and AnyEvent
		1064	together.
		1065
		1066	=item L<AnyEvent::BDB>
		1067
		1068	Truly asynchronous Berkeley DB access. AnyEvent::BDB transparently fuses
		1069	L<BDB> and AnyEvent together.
		1070
		1071	=item L<AnyEvent::GPSD>
		1072
		1073	A non-blocking interface to gpsd, a daemon delivering GPS information.
		1074
614	=item L<Net::IRC3>	1075	=item L<AnyEvent::IRC>
615		1076
616	AnyEvent based IRC client module family.	1077	AnyEvent based IRC client module family (replacing the older Net::IRC3).
617		1078
618	=item L<Net::XMPP2>	1079	=item L<AnyEvent::XMPP>
619		1080
620	AnyEvent based XMPP (Jabber protocol) module family.	1081	AnyEvent based XMPP (Jabber protocol) module family (replacing the older
		1082	Net::XMPP2>.
		1083
		1084	=item L<AnyEvent::IGS>
		1085
		1086	A non-blocking interface to the Internet Go Server protocol (used by
		1087	L<App::IGS>).
621		1088
622	=item L<Net::FCP>	1089	=item L<Net::FCP>
623		1090
624	AnyEvent-based implementation of the Freenet Client Protocol, birthplace	1091	AnyEvent-based implementation of the Freenet Client Protocol, birthplace
625	of AnyEvent.	1092	of AnyEvent.
…		…
628		1095
629	High level API for event-based execution flow control.	1096	High level API for event-based execution flow control.
630		1097
631	=item L<Coro>	1098	=item L<Coro>
632		1099
633	Has special support for AnyEvent.	1100	Has special support for AnyEvent via L<Coro::AnyEvent>.
634
635	=item L<IO::Lambda>
636
637	The lambda approach to I/O - don't ask, look there. Can use AnyEvent.
638
639	=item L<IO::AIO>
640
641	Truly asynchronous I/O, should be in the toolbox of every event
642	programmer. Can be trivially made to use AnyEvent.
643
644	=item L<BDB>
645
646	Truly asynchronous Berkeley DB access. Can be trivially made to use
647	AnyEvent.
648		1101
649	=back	1102	=back
650		1103
651	=cut	1104	=cut
652		1105
653	package AnyEvent;	1106	package AnyEvent;
654		1107
		1108	# basically a tuned-down version of common::sense
		1109	sub common_sense {
655	no warnings;	1110	# no warnings
656	use strict;	1111	${^WARNING_BITS} ^= ${^WARNING_BITS};
		1112	# use strict vars subs
		1113	$^H |= 0x00000600;
		1114	}
657		1115
		1116	BEGIN { AnyEvent::common_sense }
		1117
658	use Carp;	1118	use Carp ();
659		1119
660	our $VERSION = '3.3';	1120	our $VERSION = 4.9;
661	our $MODEL;	1121	our $MODEL;
662		1122
663	our $AUTOLOAD;	1123	our $AUTOLOAD;
664	our @ISA;	1124	our @ISA;
665		1125
666	our $verbose = $ENV{PERL_ANYEVENT_VERBOSE}*1;
667
668	our @REGISTRY;	1126	our @REGISTRY;
669		1127
		1128	our $WIN32;
		1129
		1130	our $VERBOSE;
		1131
		1132	BEGIN {
		1133	eval "sub WIN32(){ " . (($^O =~ /mswin32/i)*1) ." }";
		1134	eval "sub TAINT(){ " . (${^TAINT}*1) . " }";
		1135
		1136	delete @ENV{grep /^PERL_ANYEVENT_/, keys %ENV}
		1137	if ${^TAINT};
		1138
		1139	$VERBOSE = $ENV{PERL_ANYEVENT_VERBOSE}*1;
		1140
		1141	}
		1142
		1143	our $MAX_SIGNAL_LATENCY = 10;
		1144
		1145	our %PROTOCOL; # (ipv4|ipv6) => (1|2), higher numbers are preferred
		1146
		1147	{
		1148	my $idx;
		1149	$PROTOCOL{$_} = ++$idx
		1150	for reverse split /\s*,\s*/,
		1151	$ENV{PERL_ANYEVENT_PROTOCOLS} || "ipv4,ipv6";
		1152	}
		1153
670	my @models = (	1154	my @models = (
671	[Coro::EV:: => AnyEvent::Impl::CoroEV::],
672	[Coro::Event:: => AnyEvent::Impl::CoroEvent::],
673	[EV:: => AnyEvent::Impl::EV::],	1155	[EV:: => AnyEvent::Impl::EV:: , 1],
674	[Event:: => AnyEvent::Impl::Event::],	1156	[Event:: => AnyEvent::Impl::Event::, 1],
		1157	[AnyEvent::Impl::Perl:: => AnyEvent::Impl::Perl:: , 1],
		1158	# everything below here will not (normally) be autoprobed
		1159	# as the pureperl backend should work everywhere
		1160	# and is usually faster
		1161	[Glib:: => AnyEvent::Impl::Glib:: , 1], # becomes extremely slow with many watchers
		1162	[Event::Lib:: => AnyEvent::Impl::EventLib::], # too buggy
		1163	[Irssi:: => AnyEvent::Impl::Irssi::], # Irssi has a bogus "Event" package
675	[Tk:: => AnyEvent::Impl::Tk::],	1164	[Tk:: => AnyEvent::Impl::Tk::], # crashes with many handles
		1165	[Qt:: => AnyEvent::Impl::Qt::], # requires special main program
		1166	[POE::Kernel:: => AnyEvent::Impl::POE::], # lasciate ogni speranza
676	[Wx:: => AnyEvent::Impl::POE::],	1167	[Wx:: => AnyEvent::Impl::POE::],
677	[Prima:: => AnyEvent::Impl::POE::],	1168	[Prima:: => AnyEvent::Impl::POE::],
678	[AnyEvent::Impl::Perl:: => AnyEvent::Impl::Perl::],	1169	# IO::Async is just too broken - we would need workarounds for its
679	# everything below here will not be autoprobed as the pureperl backend should work everywhere	1170	# byzantine signal and broken child handling, among others.
680	[Glib:: => AnyEvent::Impl::Glib::],	1171	# IO::Async is rather hard to detect, as it doesn't have any
681	[Event::Lib:: => AnyEvent::Impl::EventLib::], # too buggy	1172	# obvious default class.
682	[Qt:: => AnyEvent::Impl::Qt::], # requires special main program	1173	# [0, IO::Async:: => AnyEvent::Impl::IOAsync::], # requires special main program
683	[POE::Kernel:: => AnyEvent::Impl::POE::], # lasciate ogni speranza	1174	# [0, IO::Async::Loop:: => AnyEvent::Impl::IOAsync::], # requires special main program
		1175	# [0, IO::Async::Notifier:: => AnyEvent::Impl::IOAsync::], # requires special main program
684	);	1176	);
685		1177
686	our %method = map +($_ => 1), qw(io timer signal child condvar broadcast wait one_event DESTROY);	1178	our %method = map +($_ => 1),
		1179	qw(io timer time now now_update signal child idle condvar one_event DESTROY);
		1180
		1181	our @post_detect;
		1182
		1183	sub post_detect(&) {
		1184	my ($cb) = @_;
		1185
		1186	if ($MODEL) {
		1187	$cb->();
		1188
		1189	undef
		1190	} else {
		1191	push @post_detect, $cb;
		1192
		1193	defined wantarray
		1194	? bless \$cb, "AnyEvent::Util::postdetect"
		1195	: ()
		1196	}
		1197	}
		1198
		1199	sub AnyEvent::Util::postdetect::DESTROY {
		1200	@post_detect = grep $_ != ${$_[0]}, @post_detect;
		1201	}
687		1202
688	sub detect() {	1203	sub detect() {
689	unless ($MODEL) {	1204	unless ($MODEL) {
690	no strict 'refs';	1205	local $SIG{__DIE__};
691		1206
692	if ($ENV{PERL_ANYEVENT_MODEL} =~ /^([a-zA-Z]+)$/) {	1207	if ($ENV{PERL_ANYEVENT_MODEL} =~ /^([a-zA-Z]+)$/) {
693	my $model = "AnyEvent::Impl::$1";	1208	my $model = "AnyEvent::Impl::$1";
694	if (eval "require $model") {	1209	if (eval "require $model") {
695	$MODEL = $model;	1210	$MODEL = $model;
696	warn "AnyEvent: loaded model '$model' (forced by \$PERL_ANYEVENT_MODEL), using it.\n" if $verbose > 1;	1211	warn "AnyEvent: loaded model '$model' (forced by \$ENV{PERL_ANYEVENT_MODEL}), using it.\n" if $VERBOSE >= 2;
697	} else {	1212	} else {
698	warn "AnyEvent: unable to load model '$model' (from \$PERL_ANYEVENT_MODEL):\n$@" if $verbose;	1213	warn "AnyEvent: unable to load model '$model' (from \$ENV{PERL_ANYEVENT_MODEL}):\n$@" if $VERBOSE;
699	}	1214	}
700	}	1215	}
701		1216
702	# check for already loaded models	1217	# check for already loaded models
703	unless ($MODEL) {	1218	unless ($MODEL) {
704	for (@REGISTRY, @models) {	1219	for (@REGISTRY, @models) {
705	my ($package, $model) = @$_;	1220	my ($package, $model) = @$_;
706	if (${"$package\::VERSION"} > 0) {	1221	if (${"$package\::VERSION"} > 0) {
707	if (eval "require $model") {	1222	if (eval "require $model") {
708	$MODEL = $model;	1223	$MODEL = $model;
709	warn "AnyEvent: autodetected model '$model', using it.\n" if $verbose > 1;	1224	warn "AnyEvent: autodetected model '$model', using it.\n" if $VERBOSE >= 2;
710	last;	1225	last;
711	}	1226	}
712	}	1227	}
713	}	1228	}
714		1229
715	unless ($MODEL) {	1230	unless ($MODEL) {
716	# try to load a model	1231	# try to autoload a model
717
718	for (@REGISTRY, @models) {	1232	for (@REGISTRY, @models) {
719	my ($package, $model) = @$_;	1233	my ($package, $model, $autoload) = @$_;
		1234	if (
		1235	$autoload
720	if (eval "require $package"	1236	and eval "require $package"
721	and ${"$package\::VERSION"} > 0	1237	and ${"$package\::VERSION"} > 0
722	and eval "require $model") {	1238	and eval "require $model"
		1239	) {
723	$MODEL = $model;	1240	$MODEL = $model;
724	warn "AnyEvent: autoprobed model '$model', using it.\n" if $verbose > 1;	1241	warn "AnyEvent: autoloaded model '$model', using it.\n" if $VERBOSE >= 2;
725	last;	1242	last;
726	}	1243	}
727	}	1244	}
728		1245
729	$MODEL	1246	$MODEL
730	or die "No event module selected for AnyEvent and autodetect failed. Install any one of these modules: EV (or Coro+EV), Event (or Coro+Event) or Glib.";	1247	or die "No event module selected for AnyEvent and autodetect failed. Install any one of these modules: EV, Event or Glib.\n";
731	}	1248	}
732	}	1249	}
733		1250
		1251	push @{"$MODEL\::ISA"}, "AnyEvent::Base";
		1252
734	unshift @ISA, $MODEL;	1253	unshift @ISA, $MODEL;
735	push @{"$MODEL\::ISA"}, "AnyEvent::Base";	1254
		1255	require AnyEvent::Strict if $ENV{PERL_ANYEVENT_STRICT};
		1256
		1257	(shift @post_detect)->() while @post_detect;
736	}	1258	}
737		1259
738	$MODEL	1260	$MODEL
739	}	1261	}
740		1262
741	sub AUTOLOAD {	1263	sub AUTOLOAD {
742	(my $func = $AUTOLOAD) =~ s/.*://;	1264	(my $func = $AUTOLOAD) =~ s/.*://;
743		1265
744	$method{$func}	1266	$method{$func}
745	or croak "$func: not a valid method for AnyEvent objects";	1267	or Carp::croak "$func: not a valid method for AnyEvent objects";
746		1268
747	detect unless $MODEL;	1269	detect unless $MODEL;
748		1270
749	my $class = shift;	1271	my $class = shift;
750	$class->$func (@_);	1272	$class->$func (@_);
751	}	1273	}
752		1274
		1275	# utility function to dup a filehandle. this is used by many backends
		1276	# to support binding more than one watcher per filehandle (they usually
		1277	# allow only one watcher per fd, so we dup it to get a different one).
		1278	sub _dupfh($$;$$) {
		1279	my ($poll, $fh, $r, $w) = @_;
		1280
		1281	# cygwin requires the fh mode to be matching, unix doesn't
		1282	my ($rw, $mode) = $poll eq "r" ? ($r, "<&") : ($w, ">&");
		1283
		1284	open my $fh2, $mode, $fh
		1285	or die "AnyEvent->io: cannot dup() filehandle in mode '$poll': $!,";
		1286
		1287	# we assume CLOEXEC is already set by perl in all important cases
		1288
		1289	($fh2, $rw)
		1290	}
		1291
753	package AnyEvent::Base;	1292	package AnyEvent::Base;
754		1293
		1294	# default implementations for many methods
		1295
		1296	sub _time {
		1297	# probe for availability of Time::HiRes
		1298	if (eval "use Time::HiRes (); Time::HiRes::time (); 1") {
		1299	warn "AnyEvent: using Time::HiRes for sub-second timing accuracy.\n" if $VERBOSE >= 8;
		1300	*_time = \&Time::HiRes::time;
		1301	# if (eval "use POSIX (); (POSIX::times())...
		1302	} else {
		1303	warn "AnyEvent: using built-in time(), WARNING, no sub-second resolution!\n" if $VERBOSE;
		1304	*_time = sub { time }; # epic fail
		1305	}
		1306
		1307	&_time
		1308	}
		1309
		1310	sub time { _time }
		1311	sub now { _time }
		1312	sub now_update { }
		1313
755	# default implementation for ->condvar, ->wait, ->broadcast	1314	# default implementation for ->condvar
756		1315
757	sub condvar {	1316	sub condvar {
758	bless \my $flag, "AnyEvent::Base::CondVar"	1317	bless { @_ == 3 ? (_ae_cb => $_[2]) : () }, "AnyEvent::CondVar"
759	}
760
761	sub AnyEvent::Base::CondVar::broadcast {
762	${$_[0]}++;
763	}
764
765	sub AnyEvent::Base::CondVar::wait {
766	AnyEvent->one_event while !${$_[0]};
767	}	1318	}
768		1319
769	# default implementation for ->signal	1320	# default implementation for ->signal
770		1321
771	our %SIG_CB;	1322	our $HAVE_ASYNC_INTERRUPT;
		1323
		1324	sub _have_async_interrupt() {
		1325	$HAVE_ASYNC_INTERRUPT = 1*(!$ENV{PERL_ANYEVENT_AVOID_ASYNC_INTERRUPT}
		1326	&& eval "use Async::Interrupt 1.0 (); 1")
		1327	unless defined $HAVE_ASYNC_INTERRUPT;
		1328
		1329	$HAVE_ASYNC_INTERRUPT
		1330	}
		1331
		1332	our ($SIGPIPE_R, $SIGPIPE_W, %SIG_CB, %SIG_EV, $SIG_IO);
		1333	our (%SIG_ASY, %SIG_ASY_W);
		1334	our ($SIG_COUNT, $SIG_TW);
		1335
		1336	sub _signal_exec {
		1337	$HAVE_ASYNC_INTERRUPT
		1338	? $SIGPIPE_R->drain
		1339	: sysread $SIGPIPE_R, my $dummy, 9;
		1340
		1341	while (%SIG_EV) {
		1342	for (keys %SIG_EV) {
		1343	delete $SIG_EV{$_};
		1344	$_->() for values %{ $SIG_CB{$_} || {} };
		1345	}
		1346	}
		1347	}
		1348
		1349	# install a dummy wakeup watcher to reduce signal catching latency
		1350	sub _sig_add() {
		1351	unless ($SIG_COUNT++) {
		1352	# try to align timer on a full-second boundary, if possible
		1353	my $NOW = AnyEvent->now;
		1354
		1355	$SIG_TW = AnyEvent->timer (
		1356	after => $MAX_SIGNAL_LATENCY - ($NOW - int $NOW),
		1357	interval => $MAX_SIGNAL_LATENCY,
		1358	cb => sub { }, # just for the PERL_ASYNC_CHECK
		1359	);
		1360	}
		1361	}
		1362
		1363	sub _sig_del {
		1364	undef $SIG_TW
		1365	unless --$SIG_COUNT;
		1366	}
		1367
		1368	our $_sig_name_init; $_sig_name_init = sub {
		1369	eval q{ # poor man's autoloading
		1370	undef $_sig_name_init;
		1371
		1372	if (_have_async_interrupt) {
		1373	*sig2num = \&Async::Interrupt::sig2num;
		1374	*sig2name = \&Async::Interrupt::sig2name;
		1375	} else {
		1376	require Config;
		1377
		1378	my %signame2num;
		1379	@signame2num{ split ' ', $Config::Config{sig_name} }
		1380	= split ' ', $Config::Config{sig_num};
		1381
		1382	my @signum2name;
		1383	@signum2name[values %signame2num] = keys %signame2num;
		1384
		1385	*sig2num = sub($) {
		1386	$_[0] > 0 ? shift : $signame2num{+shift}
		1387	};
		1388	*sig2name = sub ($) {
		1389	$_[0] > 0 ? $signum2name[+shift] : shift
		1390	};
		1391	}
		1392	};
		1393	die if $@;
		1394	};
		1395
		1396	sub sig2num ($) { &$_sig_name_init; &sig2num }
		1397	sub sig2name($) { &$_sig_name_init; &sig2name }
772		1398
773	sub signal {	1399	sub signal {
		1400	eval q{ # poor man's autoloading {}
		1401	# probe for availability of Async::Interrupt
		1402	if (_have_async_interrupt) {
		1403	warn "AnyEvent: using Async::Interrupt for race-free signal handling.\n" if $VERBOSE >= 8;
		1404
		1405	$SIGPIPE_R = new Async::Interrupt::EventPipe;
		1406	$SIG_IO = AnyEvent->io (fh => $SIGPIPE_R->fileno, poll => "r", cb => \&_signal_exec);
		1407
		1408	} else {
		1409	warn "AnyEvent: using emulated perl signal handling with latency timer.\n" if $VERBOSE >= 8;
		1410
		1411	require Fcntl;
		1412
		1413	if (AnyEvent::WIN32) {
		1414	require AnyEvent::Util;
		1415
		1416	($SIGPIPE_R, $SIGPIPE_W) = AnyEvent::Util::portable_pipe ();
		1417	AnyEvent::Util::fh_nonblocking ($SIGPIPE_R, 1) if $SIGPIPE_R;
		1418	AnyEvent::Util::fh_nonblocking ($SIGPIPE_W, 1) if $SIGPIPE_W; # just in case
		1419	} else {
		1420	pipe $SIGPIPE_R, $SIGPIPE_W;
		1421	fcntl $SIGPIPE_R, &Fcntl::F_SETFL, &Fcntl::O_NONBLOCK if $SIGPIPE_R;
		1422	fcntl $SIGPIPE_W, &Fcntl::F_SETFL, &Fcntl::O_NONBLOCK if $SIGPIPE_W; # just in case
		1423
		1424	# not strictly required, as $^F is normally 2, but let's make sure...
		1425	fcntl $SIGPIPE_R, &Fcntl::F_SETFD, &Fcntl::FD_CLOEXEC;
		1426	fcntl $SIGPIPE_W, &Fcntl::F_SETFD, &Fcntl::FD_CLOEXEC;
		1427	}
		1428
		1429	$SIGPIPE_R
		1430	or Carp::croak "AnyEvent: unable to create a signal reporting pipe: $!\n";
		1431
		1432	$SIG_IO = AnyEvent->io (fh => $SIGPIPE_R, poll => "r", cb => \&_signal_exec);
		1433	}
		1434
		1435	*signal = sub {
774	my (undef, %arg) = @_;	1436	my (undef, %arg) = @_;
775		1437
776	my $signal = uc $arg{signal}	1438	my $signal = uc $arg{signal}
777	or Carp::croak "required option 'signal' is missing";	1439	or Carp::croak "required option 'signal' is missing";
778		1440
		1441	if ($HAVE_ASYNC_INTERRUPT) {
		1442	# async::interrupt
		1443
		1444	$signal = sig2num $signal;
779	$SIG_CB{$signal}{$arg{cb}} = $arg{cb};	1445	$SIG_CB{$signal}{$arg{cb}} = $arg{cb};
		1446
		1447	$SIG_ASY{$signal} ||= new Async::Interrupt
		1448	cb => sub { undef $SIG_EV{$signal} },
		1449	signal => $signal,
		1450	pipe => [$SIGPIPE_R->filenos],
		1451	pipe_autodrain => 0,
		1452	;
		1453
		1454	} else {
		1455	# pure perl
		1456
		1457	# AE::Util has been loaded in signal
		1458	$signal = sig2name $signal;
		1459	$SIG_CB{$signal}{$arg{cb}} = $arg{cb};
		1460
780	$SIG{$signal} ||= sub {	1461	$SIG{$signal} ||= sub {
781	$_->() for values %{ $SIG_CB{$signal} || {} };	1462	local $!;
		1463	syswrite $SIGPIPE_W, "\x00", 1 unless %SIG_EV;
		1464	undef $SIG_EV{$signal};
		1465	};
		1466
		1467	# can't do signal processing without introducing races in pure perl,
		1468	# so limit the signal latency.
		1469	_sig_add;
		1470	}
		1471
		1472	bless [$signal, $arg{cb}], "AnyEvent::Base::signal"
		1473	};
		1474
		1475	*AnyEvent::Base::signal::DESTROY = sub {
		1476	my ($signal, $cb) = @{$_[0]};
		1477
		1478	_sig_del;
		1479
		1480	delete $SIG_CB{$signal}{$cb};
		1481
		1482	$HAVE_ASYNC_INTERRUPT
		1483	? delete $SIG_ASY{$signal}
		1484	: # delete doesn't work with older perls - they then
		1485	# print weird messages, or just unconditionally exit
		1486	# instead of getting the default action.
		1487	undef $SIG{$signal}
		1488	unless keys %{ $SIG_CB{$signal} };
		1489	};
782	};	1490	};
783		1491	die if $@;
784	bless [$signal, $arg{cb}], "AnyEvent::Base::Signal"	1492	&signal
785	}
786
787	sub AnyEvent::Base::Signal::DESTROY {
788	my ($signal, $cb) = @{$_[0]};
789
790	delete $SIG_CB{$signal}{$cb};
791
792	$SIG{$signal} = 'DEFAULT' unless keys %{ $SIG_CB{$signal} };
793	}	1493	}
794		1494
795	# default implementation for ->child	1495	# default implementation for ->child
796		1496
797	our %PID_CB;	1497	our %PID_CB;
798	our $CHLD_W;	1498	our $CHLD_W;
799	our $CHLD_DELAY_W;	1499	our $CHLD_DELAY_W;
800	our $PID_IDLE;
801	our $WNOHANG;	1500	our $WNOHANG;
802		1501
803	sub _child_wait {	1502	sub _emit_childstatus($$) {
804	while (0 < (my $pid = waitpid -1, $WNOHANG)) {	1503	my (undef, $rpid, $rstatus) = @_;
		1504
		1505	$_->($rpid, $rstatus)
805	$_->($pid, $?) for (values %{ $PID_CB{$pid} || {} }),	1506	for values %{ $PID_CB{$rpid} || {} },
806	(values %{ $PID_CB{0} || {} });	1507	values %{ $PID_CB{0} || {} };
807	}
808
809	undef $PID_IDLE;
810	}	1508	}
811		1509
812	sub _sigchld {	1510	sub _sigchld {
813	# make sure we deliver these changes "synchronous" with the event loop.	1511	my $pid;
814	$CHLD_DELAY_W ||= AnyEvent->timer (after => 0, cb => sub {	1512
815	undef $CHLD_DELAY_W;	1513	AnyEvent->_emit_childstatus ($pid, $?)
816	&_child_wait;	1514	while ($pid = waitpid -1, $WNOHANG) > 0;
817	});
818	}	1515	}
819		1516
820	sub child {	1517	sub child {
821	my (undef, %arg) = @_;	1518	my (undef, %arg) = @_;
822		1519
823	defined (my $pid = $arg{pid} + 0)	1520	defined (my $pid = $arg{pid} + 0)
824	or Carp::croak "required option 'pid' is missing";	1521	or Carp::croak "required option 'pid' is missing";
825		1522
826	$PID_CB{$pid}{$arg{cb}} = $arg{cb};	1523	$PID_CB{$pid}{$arg{cb}} = $arg{cb};
827		1524
828	unless ($WNOHANG) {	1525	# WNOHANG is almost cetrainly 1 everywhere
829	$WNOHANG = eval { require POSIX; &POSIX::WNOHANG } || 1;	1526	$WNOHANG ||= $^O =~ /^(?:openbsd|netbsd|linux|freebsd|cygwin|MSWin32)$/
830	}	1527	? 1
		1528	: eval { local $SIG{__DIE__}; require POSIX; &POSIX::WNOHANG } || 1;
831		1529
832	unless ($CHLD_W) {	1530	unless ($CHLD_W) {
833	$CHLD_W = AnyEvent->signal (signal => 'CHLD', cb => \&_sigchld);	1531	$CHLD_W = AnyEvent->signal (signal => 'CHLD', cb => \&_sigchld);
834	# child could be a zombie already, so make at least one round	1532	# child could be a zombie already, so make at least one round
835	&_sigchld;	1533	&_sigchld;
836	}	1534	}
837		1535
838	bless [$pid, $arg{cb}], "AnyEvent::Base::Child"	1536	bless [$pid, $arg{cb}], "AnyEvent::Base::child"
839	}	1537	}
840		1538
841	sub AnyEvent::Base::Child::DESTROY {	1539	sub AnyEvent::Base::child::DESTROY {
842	my ($pid, $cb) = @{$_[0]};	1540	my ($pid, $cb) = @{$_[0]};
843		1541
844	delete $PID_CB{$pid}{$cb};	1542	delete $PID_CB{$pid}{$cb};
845	delete $PID_CB{$pid} unless keys %{ $PID_CB{$pid} };	1543	delete $PID_CB{$pid} unless keys %{ $PID_CB{$pid} };
846		1544
847	undef $CHLD_W unless keys %PID_CB;	1545	undef $CHLD_W unless keys %PID_CB;
848	}	1546	}
		1547
		1548	# idle emulation is done by simply using a timer, regardless
		1549	# of whether the process is idle or not, and not letting
		1550	# the callback use more than 50% of the time.
		1551	sub idle {
		1552	my (undef, %arg) = @_;
		1553
		1554	my ($cb, $w, $rcb) = $arg{cb};
		1555
		1556	$rcb = sub {
		1557	if ($cb) {
		1558	$w = _time;
		1559	&$cb;
		1560	$w = _time - $w;
		1561
		1562	# never use more then 50% of the time for the idle watcher,
		1563	# within some limits
		1564	$w = 0.0001 if $w < 0.0001;
		1565	$w = 5 if $w > 5;
		1566
		1567	$w = AnyEvent->timer (after => $w, cb => $rcb);
		1568	} else {
		1569	# clean up...
		1570	undef $w;
		1571	undef $rcb;
		1572	}
		1573	};
		1574
		1575	$w = AnyEvent->timer (after => 0.05, cb => $rcb);
		1576
		1577	bless \\$cb, "AnyEvent::Base::idle"
		1578	}
		1579
		1580	sub AnyEvent::Base::idle::DESTROY {
		1581	undef $${$_[0]};
		1582	}
		1583
		1584	package AnyEvent::CondVar;
		1585
		1586	our @ISA = AnyEvent::CondVar::Base::;
		1587
		1588	package AnyEvent::CondVar::Base;
		1589
		1590	#use overload
		1591	# '&{}' => sub { my $self = shift; sub { $self->send (@_) } },
		1592	# fallback => 1;
		1593
		1594	# save 300+ kilobytes by dirtily hardcoding overloading
		1595	${"AnyEvent::CondVar::Base::OVERLOAD"}{dummy}++; # Register with magic by touching.
		1596	*{'AnyEvent::CondVar::Base::()'} = sub { }; # "Make it findable via fetchmethod."
		1597	*{'AnyEvent::CondVar::Base::(&{}'} = sub { my $self = shift; sub { $self->send (@_) } }; # &{}
		1598	${'AnyEvent::CondVar::Base::()'} = 1; # fallback
		1599
		1600	our $WAITING;
		1601
		1602	sub _send {
		1603	# nop
		1604	}
		1605
		1606	sub send {
		1607	my $cv = shift;
		1608	$cv->{_ae_sent} = [@_];
		1609	(delete $cv->{_ae_cb})->($cv) if $cv->{_ae_cb};
		1610	$cv->_send;
		1611	}
		1612
		1613	sub croak {
		1614	$_[0]{_ae_croak} = $_[1];
		1615	$_[0]->send;
		1616	}
		1617
		1618	sub ready {
		1619	$_[0]{_ae_sent}
		1620	}
		1621
		1622	sub _wait {
		1623	$WAITING
		1624	and !$_[0]{_ae_sent}
		1625	and Carp::croak "AnyEvent::CondVar: recursive blocking wait detected";
		1626
		1627	local $WAITING = 1;
		1628	AnyEvent->one_event while !$_[0]{_ae_sent};
		1629	}
		1630
		1631	sub recv {
		1632	$_[0]->_wait;
		1633
		1634	Carp::croak $_[0]{_ae_croak} if $_[0]{_ae_croak};
		1635	wantarray ? @{ $_[0]{_ae_sent} } : $_[0]{_ae_sent}[0]
		1636	}
		1637
		1638	sub cb {
		1639	my $cv = shift;
		1640
		1641	@_
		1642	and $cv->{_ae_cb} = shift
		1643	and $cv->{_ae_sent}
		1644	and (delete $cv->{_ae_cb})->($cv);
		1645	$cv->{_ae_cb}
		1646	}
		1647
		1648	sub begin {
		1649	++$_[0]{_ae_counter};
		1650	$_[0]{_ae_end_cb} = $_[1] if @_ > 1;
		1651	}
		1652
		1653	sub end {
		1654	return if --$_[0]{_ae_counter};
		1655	&{ $_[0]{_ae_end_cb} || sub { $_[0]->send } };
		1656	}
		1657
		1658	# undocumented/compatibility with pre-3.4
		1659	*broadcast = \&send;
		1660	*wait = \&_wait;
		1661
		1662	#############################################################################
		1663	# "new" API, currently only emulation of it
		1664	#############################################################################
		1665
		1666	package AE;
		1667
		1668	sub io($$$) {
		1669	AnyEvent->io (fh => $_[0], poll => $_[1] ? "w" : "r", cb => $_[2])
		1670	}
		1671
		1672	sub timer($$$) {
		1673	AnyEvent->timer (after => $_[0], interval => $_[1], cb => $_[2]);
		1674	}
		1675
		1676	sub signal($$) {
		1677	AnyEvent->signal (signal => $_[0], cb => $_[1]);
		1678	}
		1679
		1680	sub child($$) {
		1681	AnyEvent->child (pid => $_[0], cb => $_[1]);
		1682	}
		1683
		1684	sub idle($) {
		1685	AnyEvent->idle (cb => $_[0]);
		1686	}
		1687
		1688	sub cv() {
		1689	AnyEvent->condvar
		1690	}
		1691
		1692	sub now() {
		1693	AnyEvent->now
		1694	}
		1695
		1696	sub now_update() {
		1697	AnyEvent->now_update
		1698	}
		1699
		1700	sub time() {
		1701	AnyEvent->time
		1702	}
		1703
		1704	=head1 ERROR AND EXCEPTION HANDLING
		1705
		1706	In general, AnyEvent does not do any error handling - it relies on the
		1707	caller to do that if required. The L<AnyEvent::Strict> module (see also
		1708	the C<PERL_ANYEVENT_STRICT> environment variable, below) provides strict
		1709	checking of all AnyEvent methods, however, which is highly useful during
		1710	development.
		1711
		1712	As for exception handling (i.e. runtime errors and exceptions thrown while
		1713	executing a callback), this is not only highly event-loop specific, but
		1714	also not in any way wrapped by this module, as this is the job of the main
		1715	program.
		1716
		1717	The pure perl event loop simply re-throws the exception (usually
		1718	within C<< condvar->recv >>), the L<Event> and L<EV> modules call C<<
		1719	$Event/EV::DIED->() >>, L<Glib> uses C<< install_exception_handler >> and
		1720	so on.
		1721
		1722	=head1 ENVIRONMENT VARIABLES
		1723
		1724	The following environment variables are used by this module or its
		1725	submodules.
		1726
		1727	Note that AnyEvent will remove I<all> environment variables starting with
		1728	C<PERL_ANYEVENT_> from C<%ENV> when it is loaded while taint mode is
		1729	enabled.
		1730
		1731	=over 4
		1732
		1733	=item C<PERL_ANYEVENT_VERBOSE>
		1734
		1735	By default, AnyEvent will be completely silent except in fatal
		1736	conditions. You can set this environment variable to make AnyEvent more
		1737	talkative.
		1738
		1739	When set to C<1> or higher, causes AnyEvent to warn about unexpected
		1740	conditions, such as not being able to load the event model specified by
		1741	C<PERL_ANYEVENT_MODEL>.
		1742
		1743	When set to C<2> or higher, cause AnyEvent to report to STDERR which event
		1744	model it chooses.
		1745
		1746	When set to C<8> or higher, then AnyEvent will report extra information on
		1747	which optional modules it loads and how it implements certain features.
		1748
		1749	=item C<PERL_ANYEVENT_STRICT>
		1750
		1751	AnyEvent does not do much argument checking by default, as thorough
		1752	argument checking is very costly. Setting this variable to a true value
		1753	will cause AnyEvent to load C<AnyEvent::Strict> and then to thoroughly
		1754	check the arguments passed to most method calls. If it finds any problems,
		1755	it will croak.
		1756
		1757	In other words, enables "strict" mode.
		1758
		1759	Unlike C<use strict> (or it's modern cousin, C<< use L<common::sense>
		1760	>>, it is definitely recommended to keep it off in production. Keeping
		1761	C<PERL_ANYEVENT_STRICT=1> in your environment while developing programs
		1762	can be very useful, however.
		1763
		1764	=item C<PERL_ANYEVENT_MODEL>
		1765
		1766	This can be used to specify the event model to be used by AnyEvent, before
		1767	auto detection and -probing kicks in. It must be a string consisting
		1768	entirely of ASCII letters. The string C<AnyEvent::Impl::> gets prepended
		1769	and the resulting module name is loaded and if the load was successful,
		1770	used as event model. If it fails to load AnyEvent will proceed with
		1771	auto detection and -probing.
		1772
		1773	This functionality might change in future versions.
		1774
		1775	For example, to force the pure perl model (L<AnyEvent::Impl::Perl>) you
		1776	could start your program like this:
		1777
		1778	PERL_ANYEVENT_MODEL=Perl perl ...
		1779
		1780	=item C<PERL_ANYEVENT_PROTOCOLS>
		1781
		1782	Used by both L<AnyEvent::DNS> and L<AnyEvent::Socket> to determine preferences
		1783	for IPv4 or IPv6. The default is unspecified (and might change, or be the result
		1784	of auto probing).
		1785
		1786	Must be set to a comma-separated list of protocols or address families,
		1787	current supported: C<ipv4> and C<ipv6>. Only protocols mentioned will be
		1788	used, and preference will be given to protocols mentioned earlier in the
		1789	list.
		1790
		1791	This variable can effectively be used for denial-of-service attacks
		1792	against local programs (e.g. when setuid), although the impact is likely
		1793	small, as the program has to handle conenction and other failures anyways.
		1794
		1795	Examples: C<PERL_ANYEVENT_PROTOCOLS=ipv4,ipv6> - prefer IPv4 over IPv6,
		1796	but support both and try to use both. C<PERL_ANYEVENT_PROTOCOLS=ipv4>
		1797	- only support IPv4, never try to resolve or contact IPv6
		1798	addresses. C<PERL_ANYEVENT_PROTOCOLS=ipv6,ipv4> support either IPv4 or
		1799	IPv6, but prefer IPv6 over IPv4.
		1800
		1801	=item C<PERL_ANYEVENT_EDNS0>
		1802
		1803	Used by L<AnyEvent::DNS> to decide whether to use the EDNS0 extension
		1804	for DNS. This extension is generally useful to reduce DNS traffic, but
		1805	some (broken) firewalls drop such DNS packets, which is why it is off by
		1806	default.
		1807
		1808	Setting this variable to C<1> will cause L<AnyEvent::DNS> to announce
		1809	EDNS0 in its DNS requests.
		1810
		1811	=item C<PERL_ANYEVENT_MAX_FORKS>
		1812
		1813	The maximum number of child processes that C<AnyEvent::Util::fork_call>
		1814	will create in parallel.
		1815
		1816	=item C<PERL_ANYEVENT_MAX_OUTSTANDING_DNS>
		1817
		1818	The default value for the C<max_outstanding> parameter for the default DNS
		1819	resolver - this is the maximum number of parallel DNS requests that are
		1820	sent to the DNS server.
		1821
		1822	=item C<PERL_ANYEVENT_RESOLV_CONF>
		1823
		1824	The file to use instead of F</etc/resolv.conf> (or OS-specific
		1825	configuration) in the default resolver. When set to the empty string, no
		1826	default config will be used.
		1827
		1828	=item C<PERL_ANYEVENT_CA_FILE>, C<PERL_ANYEVENT_CA_PATH>.
		1829
		1830	When neither C<ca_file> nor C<ca_path> was specified during
		1831	L<AnyEvent::TLS> context creation, and either of these environment
		1832	variables exist, they will be used to specify CA certificate locations
		1833	instead of a system-dependent default.
		1834
		1835	=item C<PERL_ANYEVENT_AVOID_GUARD> and C<PERL_ANYEVENT_AVOID_ASYNC_INTERRUPT>
		1836
		1837	When these are set to C<1>, then the respective modules are not
		1838	loaded. Mostly good for testing AnyEvent itself.
		1839
		1840	=back
849		1841
850	=head1 SUPPLYING YOUR OWN EVENT MODEL INTERFACE	1842	=head1 SUPPLYING YOUR OWN EVENT MODEL INTERFACE
851		1843
852	This is an advanced topic that you do not normally need to use AnyEvent in	1844	This is an advanced topic that you do not normally need to use AnyEvent in
853	a module. This section is only of use to event loop authors who want to	1845	a module. This section is only of use to event loop authors who want to
…		…
887		1879
888	I<rxvt-unicode> also cheats a bit by not providing blocking access to	1880	I<rxvt-unicode> also cheats a bit by not providing blocking access to
889	condition variables: code blocking while waiting for a condition will	1881	condition variables: code blocking while waiting for a condition will
890	C<die>. This still works with most modules/usages, and blocking calls must	1882	C<die>. This still works with most modules/usages, and blocking calls must
891	not be done in an interactive application, so it makes sense.	1883	not be done in an interactive application, so it makes sense.
892
893	=head1 ENVIRONMENT VARIABLES
894
895	The following environment variables are used by this module:
896
897	=over 4
898
899	=item C<PERL_ANYEVENT_VERBOSE>
900
901	By default, AnyEvent will be completely silent except in fatal
902	conditions. You can set this environment variable to make AnyEvent more
903	talkative.
904
905	When set to C<1> or higher, causes AnyEvent to warn about unexpected
906	conditions, such as not being able to load the event model specified by
907	C<PERL_ANYEVENT_MODEL>.
908
909	When set to C<2> or higher, cause AnyEvent to report to STDERR which event
910	model it chooses.
911
912	=item C<PERL_ANYEVENT_MODEL>
913
914	This can be used to specify the event model to be used by AnyEvent, before
915	autodetection and -probing kicks in. It must be a string consisting
916	entirely of ASCII letters. The string C<AnyEvent::Impl::> gets prepended
917	and the resulting module name is loaded and if the load was successful,
918	used as event model. If it fails to load AnyEvent will proceed with
919	autodetection and -probing.
920
921	This functionality might change in future versions.
922
923	For example, to force the pure perl model (L<AnyEvent::Impl::Perl>) you
924	could start your program like this:
925
926	PERL_ANYEVENT_MODEL=Perl perl ...
927
928	=back
929		1884
930	=head1 EXAMPLE PROGRAM	1885	=head1 EXAMPLE PROGRAM
931		1886
932	The following program uses an I/O watcher to read data from STDIN, a timer	1887	The following program uses an I/O watcher to read data from STDIN, a timer
933	to display a message once per second, and a condition variable to quit the	1888	to display a message once per second, and a condition variable to quit the
…		…
942	poll => 'r',	1897	poll => 'r',
943	cb => sub {	1898	cb => sub {
944	warn "io event <$_[0]>\n"; # will always output <r>	1899	warn "io event <$_[0]>\n"; # will always output <r>
945	chomp (my $input = <STDIN>); # read a line	1900	chomp (my $input = <STDIN>); # read a line
946	warn "read: $input\n"; # output what has been read	1901	warn "read: $input\n"; # output what has been read
947	$cv->broadcast if $input =~ /^q/i; # quit program if /^q/i	1902	$cv->send if $input =~ /^q/i; # quit program if /^q/i
948	},	1903	},
949	);	1904	);
950		1905
951	my $time_watcher; # can only be used once	1906	my $time_watcher; # can only be used once
952		1907
…		…
957	});	1912	});
958	}	1913	}
959		1914
960	new_timer; # create first timer	1915	new_timer; # create first timer
961		1916
962	$cv->wait; # wait until user enters /^q/i	1917	$cv->recv; # wait until user enters /^q/i
963		1918
964	=head1 REAL-WORLD EXAMPLE	1919	=head1 REAL-WORLD EXAMPLE
965		1920
966	Consider the L<Net::FCP> module. It features (among others) the following	1921	Consider the L<Net::FCP> module. It features (among others) the following
967	API calls, which are to freenet what HTTP GET requests are to http:	1922	API calls, which are to freenet what HTTP GET requests are to http:
…		…
1017	syswrite $txn->{fh}, $txn->{request}	1972	syswrite $txn->{fh}, $txn->{request}
1018	or die "connection or write error";	1973	or die "connection or write error";
1019	$txn->{w} = AnyEvent->io (fh => $txn->{fh}, poll => 'r', cb => sub { $txn->fh_ready_r });	1974	$txn->{w} = AnyEvent->io (fh => $txn->{fh}, poll => 'r', cb => sub { $txn->fh_ready_r });
1020		1975
1021	Again, C<fh_ready_r> waits till all data has arrived, and then stores the	1976	Again, C<fh_ready_r> waits till all data has arrived, and then stores the
1022	result and signals any possible waiters that the request ahs finished:	1977	result and signals any possible waiters that the request has finished:
1023		1978
1024	sysread $txn->{fh}, $txn->{buf}, length $txn->{$buf};	1979	sysread $txn->{fh}, $txn->{buf}, length $txn->{$buf};
1025		1980
1026	if (end-of-file or data complete) {	1981	if (end-of-file or data complete) {
1027	$txn->{result} = $txn->{buf};	1982	$txn->{result} = $txn->{buf};
1028	$txn->{finished}->broadcast;	1983	$txn->{finished}->send;
1029	$txb->{cb}->($txn) of $txn->{cb}; # also call callback	1984	$txb->{cb}->($txn) of $txn->{cb}; # also call callback
1030	}	1985	}
1031		1986
1032	The C<result> method, finally, just waits for the finished signal (if the	1987	The C<result> method, finally, just waits for the finished signal (if the
1033	request was already finished, it doesn't wait, of course, and returns the	1988	request was already finished, it doesn't wait, of course, and returns the
1034	data:	1989	data:
1035		1990
1036	$txn->{finished}->wait;	1991	$txn->{finished}->recv;
1037	return $txn->{result};	1992	return $txn->{result};
1038		1993
1039	The actual code goes further and collects all errors (C<die>s, exceptions)	1994	The actual code goes further and collects all errors (C<die>s, exceptions)
1040	that occured during request processing. The C<result> method detects	1995	that occurred during request processing. The C<result> method detects
1041	whether an exception as thrown (it is stored inside the $txn object)	1996	whether an exception as thrown (it is stored inside the $txn object)
1042	and just throws the exception, which means connection errors and other	1997	and just throws the exception, which means connection errors and other
1043	problems get reported tot he code that tries to use the result, not in a	1998	problems get reported tot he code that tries to use the result, not in a
1044	random callback.	1999	random callback.
1045		2000
…		…
1076		2031
1077	my $quit = AnyEvent->condvar;	2032	my $quit = AnyEvent->condvar;
1078		2033
1079	$fcp->txn_client_get ($url)->cb (sub {	2034	$fcp->txn_client_get ($url)->cb (sub {
1080	...	2035	...
1081	$quit->broadcast;	2036	$quit->send;
1082	});	2037	});
1083		2038
1084	$quit->wait;	2039	$quit->recv;
1085		2040
1086		2041
1087	=head1 BENCHMARKS	2042	=head1 BENCHMARKS
1088		2043
1089	To give you an idea of the performance and overheads that AnyEvent adds	2044	To give you an idea of the performance and overheads that AnyEvent adds
…		…
1091	of various event loops I prepared some benchmarks.	2046	of various event loops I prepared some benchmarks.
1092		2047
1093	=head2 BENCHMARKING ANYEVENT OVERHEAD	2048	=head2 BENCHMARKING ANYEVENT OVERHEAD
1094		2049
1095	Here is a benchmark of various supported event models used natively and	2050	Here is a benchmark of various supported event models used natively and
1096	through anyevent. The benchmark creates a lot of timers (with a zero	2051	through AnyEvent. The benchmark creates a lot of timers (with a zero
1097	timeout) and I/O watchers (watching STDOUT, a pty, to become writable,	2052	timeout) and I/O watchers (watching STDOUT, a pty, to become writable,
1098	which it is), lets them fire exactly once and destroys them again.	2053	which it is), lets them fire exactly once and destroys them again.
1099		2054
1100	Source code for this benchmark is found as F<eg/bench> in the AnyEvent	2055	Source code for this benchmark is found as F<eg/bench> in the AnyEvent
1101	distribution.	2056	distribution.
…		…
1118	all watchers, to avoid adding memory overhead. That means closure creation	2073	all watchers, to avoid adding memory overhead. That means closure creation
1119	and memory usage is not included in the figures.	2074	and memory usage is not included in the figures.
1120		2075
1121	I<invoke> is the time, in microseconds, used to invoke a simple	2076	I<invoke> is the time, in microseconds, used to invoke a simple
1122	callback. The callback simply counts down a Perl variable and after it was	2077	callback. The callback simply counts down a Perl variable and after it was
1123	invoked "watcher" times, it would C<< ->broadcast >> a condvar once to	2078	invoked "watcher" times, it would C<< ->send >> a condvar once to
1124	signal the end of this phase.	2079	signal the end of this phase.
1125		2080
1126	I<destroy> is the time, in microseconds, that it takes to destroy a single	2081	I<destroy> is the time, in microseconds, that it takes to destroy a single
1127	watcher.	2082	watcher.
1128		2083
1129	=head3 Results	2084	=head3 Results
1130		2085
1131	name watchers bytes create invoke destroy comment	2086	name watchers bytes create invoke destroy comment
1132	EV/EV 400000 244 0.56 0.46 0.31 EV native interface	2087	EV/EV 400000 224 0.47 0.35 0.27 EV native interface
1133	EV/Any 100000 244 2.50 0.46 0.29 EV + AnyEvent watchers	2088	EV/Any 100000 224 2.88 0.34 0.27 EV + AnyEvent watchers
1134	CoroEV/Any 100000 244 2.49 0.44 0.29 coroutines + Coro::Signal	2089	CoroEV/Any 100000 224 2.85 0.35 0.28 coroutines + Coro::Signal
1135	Perl/Any 100000 513 4.92 0.87 1.12 pure perl implementation	2090	Perl/Any 100000 452 4.13 0.73 0.95 pure perl implementation
1136	Event/Event 16000 516 31.88 31.30 0.85 Event native interface	2091	Event/Event 16000 517 32.20 31.80 0.81 Event native interface
1137	Event/Any 16000 590 35.75 31.42 1.08 Event + AnyEvent watchers	2092	Event/Any 16000 590 35.85 31.55 1.06 Event + AnyEvent watchers
		2093	IOAsync/Any 16000 989 38.10 32.77 11.13 via IO::Async::Loop::IO_Poll
		2094	IOAsync/Any 16000 990 37.59 29.50 10.61 via IO::Async::Loop::Epoll
1138	Glib/Any 16000 1357 98.22 12.41 54.00 quadratic behaviour	2095	Glib/Any 16000 1357 102.33 12.31 51.00 quadratic behaviour
1139	Tk/Any 2000 1860 26.97 67.98 14.00 SEGV with >> 2000 watchers	2096	Tk/Any 2000 1860 27.20 66.31 14.00 SEGV with >> 2000 watchers
1140	POE/Event 2000 6644 108.64 736.02 14.73 via POE::Loop::Event	2097	POE/Event 2000 6328 109.99 751.67 14.02 via POE::Loop::Event
1141	POE/Select 2000 6343 94.13 809.12 565.96 via POE::Loop::Select	2098	POE/Select 2000 6027 94.54 809.13 579.80 via POE::Loop::Select
1142		2099
1143	=head3 Discussion	2100	=head3 Discussion
1144		2101
1145	The benchmark does I<not> measure scalability of the event loop very	2102	The benchmark does I<not> measure scalability of the event loop very
1146	well. For example, a select-based event loop (such as the pure perl one)	2103	well. For example, a select-based event loop (such as the pure perl one)
…		…
1171	performance becomes really bad with lots of file descriptors (and few of	2128	performance becomes really bad with lots of file descriptors (and few of
1172	them active), of course, but this was not subject of this benchmark.	2129	them active), of course, but this was not subject of this benchmark.
1173		2130
1174	The C<Event> module has a relatively high setup and callback invocation	2131	The C<Event> module has a relatively high setup and callback invocation
1175	cost, but overall scores in on the third place.	2132	cost, but overall scores in on the third place.
		2133
		2134	C<IO::Async> performs admirably well, about on par with C<Event>, even
		2135	when using its pure perl backend.
1176		2136
1177	C<Glib>'s memory usage is quite a bit higher, but it features a	2137	C<Glib>'s memory usage is quite a bit higher, but it features a
1178	faster callback invocation and overall ends up in the same class as	2138	faster callback invocation and overall ends up in the same class as
1179	C<Event>. However, Glib scales extremely badly, doubling the number of	2139	C<Event>. However, Glib scales extremely badly, doubling the number of
1180	watchers increases the processing time by more than a factor of four,	2140	watchers increases the processing time by more than a factor of four,
…		…
1224		2184
1225	=back	2185	=back
1226		2186
1227	=head2 BENCHMARKING THE LARGE SERVER CASE	2187	=head2 BENCHMARKING THE LARGE SERVER CASE
1228		2188
1229	This benchmark atcually benchmarks the event loop itself. It works by	2189	This benchmark actually benchmarks the event loop itself. It works by
1230	creating a number of "servers": each server consists of a socketpair, a	2190	creating a number of "servers": each server consists of a socket pair, a
1231	timeout watcher that gets reset on activity (but never fires), and an I/O	2191	timeout watcher that gets reset on activity (but never fires), and an I/O
1232	watcher waiting for input on one side of the socket. Each time the socket	2192	watcher waiting for input on one side of the socket. Each time the socket
1233	watcher reads a byte it will write that byte to a random other "server".	2193	watcher reads a byte it will write that byte to a random other "server".
1234		2194
1235	The effect is that there will be a lot of I/O watchers, only part of which	2195	The effect is that there will be a lot of I/O watchers, only part of which
1236	are active at any one point (so there is a constant number of active	2196	are active at any one point (so there is a constant number of active
1237	fds for each loop iterstaion, but which fds these are is random). The	2197	fds for each loop iteration, but which fds these are is random). The
1238	timeout is reset each time something is read because that reflects how	2198	timeout is reset each time something is read because that reflects how
1239	most timeouts work (and puts extra pressure on the event loops).	2199	most timeouts work (and puts extra pressure on the event loops).
1240		2200
1241	In this benchmark, we use 10000 socketpairs (20000 sockets), of which 100	2201	In this benchmark, we use 10000 socket pairs (20000 sockets), of which 100
1242	(1%) are active. This mirrors the activity of large servers with many	2202	(1%) are active. This mirrors the activity of large servers with many
1243	connections, most of which are idle at any one point in time.	2203	connections, most of which are idle at any one point in time.
1244		2204
1245	Source code for this benchmark is found as F<eg/bench2> in the AnyEvent	2205	Source code for this benchmark is found as F<eg/bench2> in the AnyEvent
1246	distribution.	2206	distribution.
…		…
1248	=head3 Explanation of the columns	2208	=head3 Explanation of the columns
1249		2209
1250	I<sockets> is the number of sockets, and twice the number of "servers" (as	2210	I<sockets> is the number of sockets, and twice the number of "servers" (as
1251	each server has a read and write socket end).	2211	each server has a read and write socket end).
1252		2212
1253	I<create> is the time it takes to create a socketpair (which is	2213	I<create> is the time it takes to create a socket pair (which is
1254	nontrivial) and two watchers: an I/O watcher and a timeout watcher.	2214	nontrivial) and two watchers: an I/O watcher and a timeout watcher.
1255		2215
1256	I<request>, the most important value, is the time it takes to handle a	2216	I<request>, the most important value, is the time it takes to handle a
1257	single "request", that is, reading the token from the pipe and forwarding	2217	single "request", that is, reading the token from the pipe and forwarding
1258	it to another server. This includes deleting the old timeout and creating	2218	it to another server. This includes deleting the old timeout and creating
1259	a new one that moves the timeout into the future.	2219	a new one that moves the timeout into the future.
1260		2220
1261	=head3 Results	2221	=head3 Results
1262		2222
1263	name sockets create request	2223	name sockets create request
1264	EV 20000 69.01 11.16	2224	EV 20000 69.01 11.16
1265	Perl 20000 73.32 35.87	2225	Perl 20000 73.32 35.87
		2226	IOAsync 20000 157.00 98.14 epoll
		2227	IOAsync 20000 159.31 616.06 poll
1266	Event 20000 212.62 257.32	2228	Event 20000 212.62 257.32
1267	Glib 20000 651.16 1896.30	2229	Glib 20000 651.16 1896.30
1268	POE 20000 349.67 12317.24 uses POE::Loop::Event	2230	POE 20000 349.67 12317.24 uses POE::Loop::Event
1269		2231
1270	=head3 Discussion	2232	=head3 Discussion
1271		2233
1272	This benchmark I<does> measure scalability and overall performance of the	2234	This benchmark I<does> measure scalability and overall performance of the
1273	particular event loop.	2235	particular event loop.
…		…
1275	EV is again fastest. Since it is using epoll on my system, the setup time	2237	EV is again fastest. Since it is using epoll on my system, the setup time
1276	is relatively high, though.	2238	is relatively high, though.
1277		2239
1278	Perl surprisingly comes second. It is much faster than the C-based event	2240	Perl surprisingly comes second. It is much faster than the C-based event
1279	loops Event and Glib.	2241	loops Event and Glib.
		2242
		2243	IO::Async performs very well when using its epoll backend, and still quite
		2244	good compared to Glib when using its pure perl backend.
1280		2245
1281	Event suffers from high setup time as well (look at its code and you will	2246	Event suffers from high setup time as well (look at its code and you will
1282	understand why). Callback invocation also has a high overhead compared to	2247	understand why). Callback invocation also has a high overhead compared to
1283	the C<< $_->() for .. >>-style loop that the Perl event loop uses. Event	2248	the C<< $_->() for .. >>-style loop that the Perl event loop uses. Event
1284	uses select or poll in basically all documented configurations.	2249	uses select or poll in basically all documented configurations.
…		…
1331	speed most when you have lots of watchers, not when you only have a few of	2296	speed most when you have lots of watchers, not when you only have a few of
1332	them).	2297	them).
1333		2298
1334	EV is again fastest.	2299	EV is again fastest.
1335		2300
1336	Perl again comes second. It is noticably faster than the C-based event	2301	Perl again comes second. It is noticeably faster than the C-based event
1337	loops Event and Glib, although the difference is too small to really	2302	loops Event and Glib, although the difference is too small to really
1338	matter.	2303	matter.
1339		2304
1340	POE also performs much better in this case, but is is still far behind the	2305	POE also performs much better in this case, but is is still far behind the
1341	others.	2306	others.
…		…
1344		2309
1345	=over 4	2310	=over 4
1346		2311
1347	=item * C-based event loops perform very well with small number of	2312	=item * C-based event loops perform very well with small number of
1348	watchers, as the management overhead dominates.	2313	watchers, as the management overhead dominates.
		2314
		2315	=back
		2316
		2317	=head2 THE IO::Lambda BENCHMARK
		2318
		2319	Recently I was told about the benchmark in the IO::Lambda manpage, which
		2320	could be misinterpreted to make AnyEvent look bad. In fact, the benchmark
		2321	simply compares IO::Lambda with POE, and IO::Lambda looks better (which
		2322	shouldn't come as a surprise to anybody). As such, the benchmark is
		2323	fine, and mostly shows that the AnyEvent backend from IO::Lambda isn't
		2324	very optimal. But how would AnyEvent compare when used without the extra
		2325	baggage? To explore this, I wrote the equivalent benchmark for AnyEvent.
		2326
		2327	The benchmark itself creates an echo-server, and then, for 500 times,
		2328	connects to the echo server, sends a line, waits for the reply, and then
		2329	creates the next connection. This is a rather bad benchmark, as it doesn't
		2330	test the efficiency of the framework or much non-blocking I/O, but it is a
		2331	benchmark nevertheless.
		2332
		2333	name runtime
		2334	Lambda/select 0.330 sec
		2335	+ optimized 0.122 sec
		2336	Lambda/AnyEvent 0.327 sec
		2337	+ optimized 0.138 sec
		2338	Raw sockets/select 0.077 sec
		2339	POE/select, components 0.662 sec
		2340	POE/select, raw sockets 0.226 sec
		2341	POE/select, optimized 0.404 sec
		2342
		2343	AnyEvent/select/nb 0.085 sec
		2344	AnyEvent/EV/nb 0.068 sec
		2345	+state machine 0.134 sec
		2346
		2347	The benchmark is also a bit unfair (my fault): the IO::Lambda/POE
		2348	benchmarks actually make blocking connects and use 100% blocking I/O,
		2349	defeating the purpose of an event-based solution. All of the newly
		2350	written AnyEvent benchmarks use 100% non-blocking connects (using
		2351	AnyEvent::Socket::tcp_connect and the asynchronous pure perl DNS
		2352	resolver), so AnyEvent is at a disadvantage here, as non-blocking connects
		2353	generally require a lot more bookkeeping and event handling than blocking
		2354	connects (which involve a single syscall only).
		2355
		2356	The last AnyEvent benchmark additionally uses L<AnyEvent::Handle>, which
		2357	offers similar expressive power as POE and IO::Lambda, using conventional
		2358	Perl syntax. This means that both the echo server and the client are 100%
		2359	non-blocking, further placing it at a disadvantage.
		2360
		2361	As you can see, the AnyEvent + EV combination even beats the
		2362	hand-optimised "raw sockets benchmark", while AnyEvent + its pure perl
		2363	backend easily beats IO::Lambda and POE.
		2364
		2365	And even the 100% non-blocking version written using the high-level (and
		2366	slow :) L<AnyEvent::Handle> abstraction beats both POE and IO::Lambda by a
		2367	large margin, even though it does all of DNS, tcp-connect and socket I/O
		2368	in a non-blocking way.
		2369
		2370	The two AnyEvent benchmarks programs can be found as F<eg/ae0.pl> and
		2371	F<eg/ae2.pl> in the AnyEvent distribution, the remaining benchmarks are
		2372	part of the IO::lambda distribution and were used without any changes.
		2373
		2374
		2375	=head1 SIGNALS
		2376
		2377	AnyEvent currently installs handlers for these signals:
		2378
		2379	=over 4
		2380
		2381	=item SIGCHLD
		2382
		2383	A handler for C<SIGCHLD> is installed by AnyEvent's child watcher
		2384	emulation for event loops that do not support them natively. Also, some
		2385	event loops install a similar handler.
		2386
		2387	Additionally, when AnyEvent is loaded and SIGCHLD is set to IGNORE, then
		2388	AnyEvent will reset it to default, to avoid losing child exit statuses.
		2389
		2390	=item SIGPIPE
		2391
		2392	A no-op handler is installed for C<SIGPIPE> when C<$SIG{PIPE}> is C<undef>
		2393	when AnyEvent gets loaded.
		2394
		2395	The rationale for this is that AnyEvent users usually do not really depend
		2396	on SIGPIPE delivery (which is purely an optimisation for shell use, or
		2397	badly-written programs), but C<SIGPIPE> can cause spurious and rare
		2398	program exits as a lot of people do not expect C<SIGPIPE> when writing to
		2399	some random socket.
		2400
		2401	The rationale for installing a no-op handler as opposed to ignoring it is
		2402	that this way, the handler will be restored to defaults on exec.
		2403
		2404	Feel free to install your own handler, or reset it to defaults.
		2405
		2406	=back
		2407
		2408	=cut
		2409
		2410	undef $SIG{CHLD}
		2411	if $SIG{CHLD} eq 'IGNORE';
		2412
		2413	$SIG{PIPE} = sub { }
		2414	unless defined $SIG{PIPE};
		2415
		2416	=head1 RECOMMENDED/OPTIONAL MODULES
		2417
		2418	One of AnyEvent's main goals is to be 100% Pure-Perl(tm): only perl (and
		2419	it's built-in modules) are required to use it.
		2420
		2421	That does not mean that AnyEvent won't take advantage of some additional
		2422	modules if they are installed.
		2423
		2424	This section epxlains which additional modules will be used, and how they
		2425	affect AnyEvent's operetion.
		2426
		2427	=over 4
		2428
		2429	=item L<Async::Interrupt>
		2430
		2431	This slightly arcane module is used to implement fast signal handling: To
		2432	my knowledge, there is no way to do completely race-free and quick
		2433	signal handling in pure perl. To ensure that signals still get
		2434	delivered, AnyEvent will start an interval timer to wake up perl (and
		2435	catch the signals) with some delay (default is 10 seconds, look for
		2436	C<$AnyEvent::MAX_SIGNAL_LATENCY>).
		2437
		2438	If this module is available, then it will be used to implement signal
		2439	catching, which means that signals will not be delayed, and the event loop
		2440	will not be interrupted regularly, which is more efficient (And good for
		2441	battery life on laptops).
		2442
		2443	This affects not just the pure-perl event loop, but also other event loops
		2444	that have no signal handling on their own (e.g. Glib, Tk, Qt).
		2445
		2446	Some event loops (POE, Event, Event::Lib) offer signal watchers natively,
		2447	and either employ their own workarounds (POE) or use AnyEvent's workaround
		2448	(using C<$AnyEvent::MAX_SIGNAL_LATENCY>). Installing L<Async::Interrupt>
		2449	does nothing for those backends.
		2450
		2451	=item L<EV>
		2452
		2453	This module isn't really "optional", as it is simply one of the backend
		2454	event loops that AnyEvent can use. However, it is simply the best event
		2455	loop available in terms of features, speed and stability: It supports
		2456	the AnyEvent API optimally, implements all the watcher types in XS, does
		2457	automatic timer adjustments even when no monotonic clock is available,
		2458	can take avdantage of advanced kernel interfaces such as C<epoll> and
		2459	C<kqueue>, and is the fastest backend I<by far>. You can even embed
		2460	L<Glib>/L<Gtk2> in it (or vice versa, see L<EV::Glib> and L<Glib::EV>).
		2461
		2462	=item L<Guard>
		2463
		2464	The guard module, when used, will be used to implement
		2465	C<AnyEvent::Util::guard>. This speeds up guards considerably (and uses a
		2466	lot less memory), but otherwise doesn't affect guard operation much. It is
		2467	purely used for performance.
		2468
		2469	=item L<JSON> and L<JSON::XS>
		2470
		2471	This module is required when you want to read or write JSON data via
		2472	L<AnyEvent::Handle>. It is also written in pure-perl, but can take
		2473	advantage of the ultra-high-speed L<JSON::XS> module when it is installed.
		2474
		2475	In fact, L<AnyEvent::Handle> will use L<JSON::XS> by default if it is
		2476	installed.
		2477
		2478	=item L<Net::SSLeay>
		2479
		2480	Implementing TLS/SSL in Perl is certainly interesting, but not very
		2481	worthwhile: If this module is installed, then L<AnyEvent::Handle> (with
		2482	the help of L<AnyEvent::TLS>), gains the ability to do TLS/SSL.
		2483
		2484	=item L<Time::HiRes>
		2485
		2486	This module is part of perl since release 5.008. It will be used when the
		2487	chosen event library does not come with a timing source on it's own. The
		2488	pure-perl event loop (L<AnyEvent::Impl::Perl>) will additionally use it to
		2489	try to use a monotonic clock for timing stability.
1349		2490
1350	=back	2491	=back
1351		2492
1352		2493
1353	=head1 FORK	2494	=head1 FORK
…		…
1355	Most event libraries are not fork-safe. The ones who are usually are	2496	Most event libraries are not fork-safe. The ones who are usually are
1356	because they rely on inefficient but fork-safe C<select> or C<poll>	2497	because they rely on inefficient but fork-safe C<select> or C<poll>
1357	calls. Only L<EV> is fully fork-aware.	2498	calls. Only L<EV> is fully fork-aware.
1358		2499
1359	If you have to fork, you must either do so I<before> creating your first	2500	If you have to fork, you must either do so I<before> creating your first
1360	watcher OR you must not use AnyEvent at all in the child.	2501	watcher OR you must not use AnyEvent at all in the child OR you must do
		2502	something completely out of the scope of AnyEvent.
1361		2503
1362		2504
1363	=head1 SECURITY CONSIDERATIONS	2505	=head1 SECURITY CONSIDERATIONS
1364		2506
1365	AnyEvent can be forced to load any event model via	2507	AnyEvent can be forced to load any event model via
…		…
1370	specified in the variable.	2512	specified in the variable.
1371		2513
1372	You can make AnyEvent completely ignore this variable by deleting it	2514	You can make AnyEvent completely ignore this variable by deleting it
1373	before the first watcher gets created, e.g. with a C<BEGIN> block:	2515	before the first watcher gets created, e.g. with a C<BEGIN> block:
1374		2516
1375	BEGIN { delete $ENV{PERL_ANYEVENT_MODEL} }	2517	BEGIN { delete $ENV{PERL_ANYEVENT_MODEL} }
1376		2518
1377	use AnyEvent;	2519	use AnyEvent;
		2520
		2521	Similar considerations apply to $ENV{PERL_ANYEVENT_VERBOSE}, as that can
		2522	be used to probe what backend is used and gain other information (which is
		2523	probably even less useful to an attacker than PERL_ANYEVENT_MODEL), and
		2524	$ENV{PERL_ANYEVENT_STRICT}.
		2525
		2526	Note that AnyEvent will remove I<all> environment variables starting with
		2527	C<PERL_ANYEVENT_> from C<%ENV> when it is loaded while taint mode is
		2528	enabled.
		2529
		2530
		2531	=head1 BUGS
		2532
		2533	Perl 5.8 has numerous memleaks that sometimes hit this module and are hard
		2534	to work around. If you suffer from memleaks, first upgrade to Perl 5.10
		2535	and check wether the leaks still show up. (Perl 5.10.0 has other annoying
		2536	memleaks, such as leaking on C<map> and C<grep> but it is usually not as
		2537	pronounced).
1378		2538
1379		2539
1380	=head1 SEE ALSO	2540	=head1 SEE ALSO
1381		2541
1382	Event modules: L<Coro::EV>, L<EV>, L<EV::Glib>, L<Glib::EV>,	2542	Utility functions: L<AnyEvent::Util>.
1383	L<Coro::Event>, L<Event>, L<Glib::Event>, L<Glib>, L<Coro>, L<Tk>,	2543
		2544	Event modules: L<EV>, L<EV::Glib>, L<Glib::EV>, L<Event>, L<Glib::Event>,
1384	L<Event::Lib>, L<Qt>, L<POE>.	2545	L<Glib>, L<Tk>, L<Event::Lib>, L<Qt>, L<POE>.
1385		2546
1386	Implementations: L<AnyEvent::Impl::CoroEV>, L<AnyEvent::Impl::EV>,	2547	Implementations: L<AnyEvent::Impl::EV>, L<AnyEvent::Impl::Event>,
		2548	L<AnyEvent::Impl::Glib>, L<AnyEvent::Impl::Tk>, L<AnyEvent::Impl::Perl>,
		2549	L<AnyEvent::Impl::EventLib>, L<AnyEvent::Impl::Qt>,
1387	L<AnyEvent::Impl::CoroEvent>, L<AnyEvent::Impl::Event>, L<AnyEvent::Impl::Glib>,	2550	L<AnyEvent::Impl::POE>, L<AnyEvent::Impl::IOAsync>, L<Anyevent::Impl::Irssi>.
1388	L<AnyEvent::Impl::Tk>, L<AnyEvent::Impl::Perl>, L<AnyEvent::Impl::EventLib>,
1389	L<AnyEvent::Impl::Qt>, L<AnyEvent::Impl::POE>.
1390		2551
		2552	Non-blocking file handles, sockets, TCP clients and
		2553	servers: L<AnyEvent::Handle>, L<AnyEvent::Socket>, L<AnyEvent::TLS>.
		2554
		2555	Asynchronous DNS: L<AnyEvent::DNS>.
		2556
		2557	Coroutine support: L<Coro>, L<Coro::AnyEvent>, L<Coro::EV>,
		2558	L<Coro::Event>,
		2559
1391	Nontrivial usage examples: L<Net::FCP>, L<Net::XMPP2>.	2560	Nontrivial usage examples: L<AnyEvent::GPSD>, L<AnyEvent::XMPP>,
		2561	L<AnyEvent::HTTP>.
1392		2562
1393		2563
1394	=head1 AUTHOR	2564	=head1 AUTHOR
1395		2565
1396	Marc Lehmann <schmorp@schmorp.de>	2566	Marc Lehmann <schmorp@schmorp.de>
1397	http://home.schmorp.de/	2567	http://home.schmorp.de/
1398		2568
1399	=cut	2569	=cut
1400		2570
1401	1	2571	1
1402		2572

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines