[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent.pm

Comparing AnyEvent/lib/AnyEvent.pm (file contents):
Revision 1.279 by root, Sun Aug 9 16:05:11 2009 UTC vs.
Revision 1.308 by root, Fri Dec 25 07:39:41 2009 UTC

 might affect timers and time-outs.
 When this is the case, you can call this method, which will update the
 event loop's idea of "current time".
+A typical example would be a script in a web server (e.g. C<mod_perl>) -
+when mod_perl executes the script, then the event loop will have the wrong
+idea about the "current time" (being potentially far in the past, when the
+script ran the last time). In that case you should arrange a call to C<<
+AnyEvent->now_update >> each time the web server process wakes up again
+(e.g. at the start of your script, or in a handler).
 Note that updating the time I<might> cause some events to be handled.
 =back
 =head2 SIGNAL WATCHERS
 correctly.
 Example: exit on SIGINT
    my $w = AnyEvent->signal (signal => "INT", cb => sub { exit 1 });
+=head3 Restart Behaviour
+While restart behaviour is up to the event loop implementation, most will
+not restart syscalls (that includes L<Async::Interrupt> and AnyEvent's
+pure perl implementation).
+=head3 Safe/Unsafe Signals
+Perl signals can be either "safe" (synchronous to opcode handling) or
+"unsafe" (asynchronous) - the former might get delayed indefinitely, the
+latter might corrupt your memory.
+AnyEvent signal handlers are, in addition, synchronous to the event loop,
+i.e. they will not interrupt your running perl program but will only be
+called as part of the normal event handling (just like timer, I/O etc.
+callbacks, too).
 =head3 Signal Races, Delays and Workarounds
 Many event loops (e.g. Glib, Tk, Qt, IO::Async) do not support attaching
 callbacks to signals in a generic way, which is a pity, as you cannot
       after => 1,
       cb    => sub { $result_ready->send },
    );
    # this "blocks" (while handling events) till the callback
-   # calls -<send
+   # calls ->send
    $result_ready->recv;
 Example: wait for a timer, but take advantage of the fact that condition
 variables are also callable directly.
 one. For example, a function that pings many hosts in parallel might want
 to use a condition variable for the whole process.
 Every call to C<< ->begin >> will increment a counter, and every call to
 C<< ->end >> will decrement it.  If the counter reaches C<0> in C<< ->end
->>, the (last) callback passed to C<begin> will be executed. That callback
+>>, the (last) callback passed to C<begin> will be executed, passing the
-is I<supposed> to call C<< ->send >>, but that is not required. If no
+condvar as first argument. That callback is I<supposed> to call C<< ->send
-callback was set, C<send> will be called without any arguments.
+>>, but that is not required. If no group callback was set, C<send> will
+be called without any arguments.
 You can think of C<< $cv->send >> giving you an OR condition (one call
 sends), while C<< $cv->begin >> and C<< $cv->end >> giving you an AND
 condition (all C<begin> calls must be C<end>'ed before the condvar sends).
 begung can potentially be zero:
    my $cv = AnyEvent->condvar;
    my %result;
-   $cv->begin (sub { $cv->send (\%result) });
+   $cv->begin (sub { shift->send (\%result) });
    for my $host (@list_of_hosts) {
       $cv->begin;
       ping_host_then_call_callback $host, sub {
          $result{$host} = ...;
 You should check C<$AnyEvent::MODEL> before adding to this array, though:
 if it is defined then the event loop has already been detected, and the
 array will be ignored.
 Best use C<AnyEvent::post_detect { BLOCK }> when your application allows
-it,as it takes care of these details.
+it, as it takes care of these details.
 This variable is mainly useful for modules that can do something useful
 when AnyEvent is used and thus want to know when it is initialised, but do
 not need to even load it by default. This array provides the means to hook
 into AnyEvent passively, without loading it.
+Example: To load Coro::AnyEvent whenever Coro and AnyEvent are used
+together, you could put this into Coro (this is the actual code used by
+Coro to accomplish this):
+   if (defined $AnyEvent::MODEL) {
+      # AnyEvent already initialised, so load Coro::AnyEvent
+      require Coro::AnyEvent;
+   } else {
+      # AnyEvent not yet initialised, so make sure to load Coro::AnyEvent
+      # as soon as it is
+      push @AnyEvent::post_detect, sub { require Coro::AnyEvent };
+   }
 =back
 =head1 WHAT TO DO IN A MODULE
 package AnyEvent;
 # basically a tuned-down version of common::sense
 sub common_sense {
-   # no warnings
+   # from common:.sense 1.0
-   ${^WARNING_BITS} ^= ${^WARNING_BITS};
+   ${^WARNING_BITS} = "\xfc\x3f\x33\x00\x0f\xf3\xcf\xc0\xf3\xfc\x33\x00";
-   # use strict vars subs
+   # use strict vars subs - NO UTF-8, as Util.pm doesn't like this atm. (uts46data.pl)
    $^H |= 0x00000600;
 }
 BEGIN { AnyEvent::common_sense }
 use Carp ();
-our $VERSION = '5.0';
+our $VERSION = '5.23';
 our $MODEL;
 our $AUTOLOAD;
 our @ISA;
 our @REGISTRY;
-our $WIN32;
 our $VERBOSE;
 BEGIN {
    eval "sub WIN32(){ " . (($^O =~ /mswin32/i)*1) ." }";
 package AnyEvent::Base;
 # default implementations for many methods
-sub _time {
+sub _time() {
    # probe for availability of Time::HiRes
    if (eval "use Time::HiRes (); Time::HiRes::time (); 1") {
       warn "AnyEvent: using Time::HiRes for sub-second timing accuracy.\n" if $VERBOSE >= 8;
       *_time = \&Time::HiRes::time;
       # if (eval "use POSIX (); (POSIX::times())...
 our $HAVE_ASYNC_INTERRUPT;
 sub _have_async_interrupt() {
    $HAVE_ASYNC_INTERRUPT = 1*(!$ENV{PERL_ANYEVENT_AVOID_ASYNC_INTERRUPT}
-                              && eval "use Async::Interrupt 1.0 (); 1")
+                              && eval "use Async::Interrupt 1.02 (); 1")
       unless defined $HAVE_ASYNC_INTERRUPT;
    $HAVE_ASYNC_INTERRUPT
 }
 our ($SIG_COUNT, $SIG_TW);
 sub _signal_exec {
    $HAVE_ASYNC_INTERRUPT
       ? $SIGPIPE_R->drain
-      : sysread $SIGPIPE_R, my $dummy, 9;
+      : sysread $SIGPIPE_R, (my $dummy), 9;
    while (%SIG_EV) {
       for (keys %SIG_EV) {
          delete $SIG_EV{$_};
          $_->() for values %{ $SIG_CB{$_} || {} };
          warn "read: $input\n";       # output what has been read
          $cv->send if $input =~ /^q/i; # quit program if /^q/i
       },
    );
-   my $time_watcher; # can only be used once
-   sub new_timer {
-      $timer = AnyEvent->timer (after => 1, cb => sub {
+   my $time_watcher = AnyEvent->timer (after => 1, interval => 1, cb => sub {
-         warn "timeout\n"; # print 'timeout' about every second
+      warn "timeout\n"; # print 'timeout' at most every second
-         &new_timer; # and restart the time
-      });
+   });
-   }
-   new_timer; # create first timer
    $cv->recv; # wait until user enters /^q/i
 =head1 REAL-WORLD EXAMPLE
 As you can see, the AnyEvent + EV combination even beats the
 hand-optimised "raw sockets benchmark", while AnyEvent + its pure perl
 backend easily beats IO::Lambda and POE.
 And even the 100% non-blocking version written using the high-level (and
-slow :) L<AnyEvent::Handle> abstraction beats both POE and IO::Lambda by a
+slow :) L<AnyEvent::Handle> abstraction beats both POE and IO::Lambda
-large margin, even though it does all of DNS, tcp-connect and socket I/O
+higher level ("unoptimised") abstractions by a large margin, even though
-in a non-blocking way.
+it does all of DNS, tcp-connect and socket I/O in a non-blocking way.
 The two AnyEvent benchmarks programs can be found as F<eg/ae0.pl> and
 F<eg/ae2.pl> in the AnyEvent distribution, the remaining benchmarks are
-part of the IO::lambda distribution and were used without any changes.
+part of the IO::Lambda distribution and were used without any changes.
 =head1 SIGNALS
 AnyEvent currently installs handlers for these signals:
 it's built-in modules) are required to use it.
 That does not mean that AnyEvent won't take advantage of some additional
 modules if they are installed.
-This section epxlains which additional modules will be used, and how they
+This section explains which additional modules will be used, and how they
-affect AnyEvent's operetion.
+affect AnyEvent's operation.
 =over 4
 =item L<Async::Interrupt>
 catch the signals) with some delay (default is 10 seconds, look for
 C<$AnyEvent::MAX_SIGNAL_LATENCY>).
 If this module is available, then it will be used to implement signal
 catching, which means that signals will not be delayed, and the event loop
-will not be interrupted regularly, which is more efficient (And good for
+will not be interrupted regularly, which is more efficient (and good for
 battery life on laptops).
 This affects not just the pure-perl event loop, but also other event loops
 that have no signal handling on their own (e.g. Glib, Tk, Qt).
 lot less memory), but otherwise doesn't affect guard operation much. It is
 purely used for performance.
 =item L<JSON> and L<JSON::XS>
-This module is required when you want to read or write JSON data via
+One of these modules is required when you want to read or write JSON data
-L<AnyEvent::Handle>. It is also written in pure-perl, but can take
+via L<AnyEvent::Handle>. It is also written in pure-perl, but can take
 advantage of the ultra-high-speed L<JSON::XS> module when it is installed.
 In fact, L<AnyEvent::Handle> will use L<JSON::XS> by default if it is
 installed.
 =head1 FORK
 Most event libraries are not fork-safe. The ones who are usually are
-because they rely on inefficient but fork-safe C<select> or C<poll>
+because they rely on inefficient but fork-safe C<select> or C<poll> calls
-calls. Only L<EV> is fully fork-aware.
+- higher performance APIs such as BSD's kqueue or the dreaded Linux epoll
+are usually badly thought-out hacks that are incompatible with fork in
+one way or another. Only L<EV> is fully fork-aware and ensures that you
+continue event-processing in both parent and child (or both, if you know
+what you are doing).
+This means that, in general, you cannot fork and do event processing in
+the child if the event library was initialised before the fork (which
+usually happens when the first AnyEvent watcher is created, or the library
+is loaded).
 If you have to fork, you must either do so I<before> creating your first
 watcher OR you must not use AnyEvent at all in the child OR you must do
 something completely out of the scope of AnyEvent.
+The problem of doing event processing in the parent I<and> the child
+is much more complicated: even for backends that I<are> fork-aware or
+fork-safe, their behaviour is not usually what you want: fork clones all
+watchers, that means all timers, I/O watchers etc. are active in both
+parent and child, which is almost never what you want. USing C<exec>
+to start worker children from some kind of manage rprocess is usually
+preferred, because it is much easier and cleaner, at the expense of having
+to have another binary.
 =head1 SECURITY CONSIDERATIONS
 AnyEvent can be forced to load any event model via

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent.pm (file contents): Revision 1.279 by root, Sun Aug 9 16:05:11 2009 UTC vs. Revision 1.308 by root, Fri Dec 25 07:39:41 2009 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent.pm (file contents):
Revision 1.279 by root, Sun Aug 9 16:05:11 2009 UTC vs.
Revision 1.308 by root, Fri Dec 25 07:39:41 2009 UTC