ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.98 by root, Thu Oct 2 15:11:01 2008 UTC vs.
Revision 1.184 by root, Thu Sep 3 13:14:38 2009 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.3;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	warn "got error $msg\n";
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	);
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	filehandles.
52	on sockets see L<AnyEvent::Util>.
53		37
54	The L<AnyEvent::Intro> tutorial contains some well-documented	38	The L<AnyEvent::Intro> tutorial contains some well-documented
55	AnyEvent::Handle examples.	39	AnyEvent::Handle examples.
56		40
57	In the following, when the documentation refers to of "bytes" then this	41	In the following, when the documentation refers to of "bytes" then this
58	means characters. As sysread and syswrite are used for all I/O, their	42	means characters. As sysread and syswrite are used for all I/O, their
59	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
60		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
		47
61	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
62	argument.	49	argument.
63		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
64	=head1 METHODS	65	=head1 METHODS
65		66
66	=over 4	67	=over 4
67		68
68	=item B<new (%args)>	69	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
69		70
70	The constructor supports these arguments (all as key => value pairs).	71	The constructor supports these arguments (all as C<< key => value >> pairs).
71		72
72	=over 4	73	=over 4
73		74
74	=item fh => $filehandle [MANDATORY]	75	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
75		76
76	The filehandle this L<AnyEvent::Handle> object will operate on.	77	The filehandle this L<AnyEvent::Handle> object will operate on.
77
78	NOTE: The filehandle will be set to non-blocking mode (using	78	NOTE: The filehandle will be set to non-blocking mode (using
79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in	79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
80	that mode.	80	that mode.
81		81
		82	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		83
		84	Try to connect to the specified host and service (port), using
		85	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		86	default C<peername>.
		87
		88	You have to specify either this parameter, or C<fh>, above.
		89
		90	It is possible to push requests on the read and write queues, and modify
		91	properties of the stream, even while AnyEvent::Handle is connecting.
		92
		93	When this parameter is specified, then the C<on_prepare>,
		94	C<on_connect_error> and C<on_connect> callbacks will be called under the
		95	appropriate circumstances:
		96
		97	=over 4
		98
82	=item on_eof => $cb->($handle)	99	=item on_prepare => $cb->($handle)
83		100
84	Set the callback to be called when an end-of-file condition is detected,	101	This (rarely used) callback is called before a new connection is
85	i.e. in the case of a socket, when the other side has closed the	102	attempted, but after the file handle has been created. It could be used to
86	connection cleanly.	103	prepare the file handle with parameters required for the actual connect
		104	(as opposed to settings that can be changed when the connection is already
		105	established).
87		106
88	For sockets, this just means that the other side has stopped sending data,	107	The return value of this callback should be the connect timeout value in
89	you can still try to write data, and, in fact, one can return from the eof	108	seconds (or C<0>, or C<undef>, or the empty list, to indicate the default
90	callback and continue writing data, as only the read part has been shut	109	timeout is to be used).
91	down.
92		110
93	While not mandatory, it is I<highly> recommended to set an eof callback,	111	=item on_connect => $cb->($handle, $host, $port, $retry->())
94	otherwise you might end up with a closed socket while you are still
95	waiting for data.
96		112
97	If an EOF condition has been detected but no C<on_eof> callback has been	113	This callback is called when a connection has been successfully established.
98	set, then a fatal error will be raised with C<$!> set to <0>.
99		114
		115	The actual numeric host and port (the socket peername) are passed as
		116	parameters, together with a retry callback.
		117
		118	When, for some reason, the handle is not acceptable, then calling
		119	C<$retry> will continue with the next conenction target (in case of
		120	multi-homed hosts or SRV records there can be multiple connection
		121	endpoints). When it is called then the read and write queues, eof status,
		122	tls status and similar properties of the handle are being reset.
		123
		124	In most cases, ignoring the C<$retry> parameter is the way to go.
		125
		126	=item on_connect_error => $cb->($handle, $message)
		127
		128	This callback is called when the conenction could not be
		129	established. C<$!> will contain the relevant error code, and C<$message> a
		130	message describing it (usually the same as C<"$!">).
		131
		132	If this callback isn't specified, then C<on_error> will be called with a
		133	fatal error instead.
		134
		135	=back
		136
100	=item on_error => $cb->($handle, $fatal)	137	=item on_error => $cb->($handle, $fatal, $message)
101		138
102	This is the error callback, which is called when, well, some error	139	This is the error callback, which is called when, well, some error
103	occured, such as not being able to resolve the hostname, failure to	140	occured, such as not being able to resolve the hostname, failure to
104	connect or a read error.	141	connect or a read error.
105		142
106	Some errors are fatal (which is indicated by C<$fatal> being true). On	143	Some errors are fatal (which is indicated by C<$fatal> being true). On
107	fatal errors the handle object will be shut down and will not be usable	144	fatal errors the handle object will be destroyed (by a call to C<< ->
108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal	145	destroy >>) after invoking the error callback (which means you are free to
109	errors are an EOF condition with active (but unsatisifable) read watchers	146	examine the handle object). Examples of fatal errors are an EOF condition
110	(C<EPIPE>) or I/O errors.	147	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		148	cases where the other side can close the connection at their will it is
		149	often easiest to not report C<EPIPE> errors in this callback.
		150
		151	AnyEvent::Handle tries to find an appropriate error code for you to check
		152	against, but in some cases (TLS errors), this does not work well. It is
		153	recommended to always output the C<$message> argument in human-readable
		154	error messages (it's usually the same as C<"$!">).
111		155
112	Non-fatal errors can be retried by simply returning, but it is recommended	156	Non-fatal errors can be retried by simply returning, but it is recommended
113	to simply ignore this parameter and instead abondon the handle object	157	to simply ignore this parameter and instead abondon the handle object
114	when this callback is invoked. Examples of non-fatal errors are timeouts	158	when this callback is invoked. Examples of non-fatal errors are timeouts
115	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).	159	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
116		160
117	On callback entrance, the value of C<$!> contains the operating system	161	On callback entrance, the value of C<$!> contains the operating system
118	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	162	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		163	C<EPROTO>).
119		164
120	While not mandatory, it is I<highly> recommended to set this callback, as	165	While not mandatory, it is I<highly> recommended to set this callback, as
121	you will not be notified of errors otherwise. The default simply calls	166	you will not be notified of errors otherwise. The default simply calls
122	C<croak>.	167	C<croak>.
123		168
…		…
127	and no read request is in the queue (unlike read queue callbacks, this	172	and no read request is in the queue (unlike read queue callbacks, this
128	callback will only be called when at least one octet of data is in the	173	callback will only be called when at least one octet of data is in the
129	read buffer).	174	read buffer).
130		175
131	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	176	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
132	method or access the C<$handle->{rbuf}> member directly.	177	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		178	must not enlarge or modify the read buffer, you can only remove data at
		179	the beginning from it.
133		180
134	When an EOF condition is detected then AnyEvent::Handle will first try to	181	When an EOF condition is detected then AnyEvent::Handle will first try to
135	feed all the remaining data to the queued callbacks and C<on_read> before	182	feed all the remaining data to the queued callbacks and C<on_read> before
136	calling the C<on_eof> callback. If no progress can be made, then a fatal	183	calling the C<on_eof> callback. If no progress can be made, then a fatal
137	error will be raised (with C<$!> set to C<EPIPE>).	184	error will be raised (with C<$!> set to C<EPIPE>).
		185
		186	Note that, unlike requests in the read queue, an C<on_read> callback
		187	doesn't mean you I<require> some data: if there is an EOF and there
		188	are outstanding read requests then an error will be flagged. With an
		189	C<on_read> callback, the C<on_eof> callback will be invoked.
		190
		191	=item on_eof => $cb->($handle)
		192
		193	Set the callback to be called when an end-of-file condition is detected,
		194	i.e. in the case of a socket, when the other side has closed the
		195	connection cleanly, and there are no outstanding read requests in the
		196	queue (if there are read requests, then an EOF counts as an unexpected
		197	connection close and will be flagged as an error).
		198
		199	For sockets, this just means that the other side has stopped sending data,
		200	you can still try to write data, and, in fact, one can return from the EOF
		201	callback and continue writing data, as only the read part has been shut
		202	down.
		203
		204	If an EOF condition has been detected but no C<on_eof> callback has been
		205	set, then a fatal error will be raised with C<$!> set to <0>.
138		206
139	=item on_drain => $cb->($handle)	207	=item on_drain => $cb->($handle)
140		208
141	This sets the callback that is called when the write buffer becomes empty	209	This sets the callback that is called when the write buffer becomes empty
142	(or when the callback is set and the buffer is empty already).	210	(or when the callback is set and the buffer is empty already).
…		…
149	memory and push it into the queue, but instead only read more data from	217	memory and push it into the queue, but instead only read more data from
150	the file when the write queue becomes empty.	218	the file when the write queue becomes empty.
151		219
152	=item timeout => $fractional_seconds	220	=item timeout => $fractional_seconds
153		221
		222	=item rtimeout => $fractional_seconds
		223
		224	=item wtimeout => $fractional_seconds
		225
154	If non-zero, then this enables an "inactivity" timeout: whenever this many	226	If non-zero, then these enables an "inactivity" timeout: whenever this
155	seconds pass without a successful read or write on the underlying file	227	many seconds pass without a successful read or write on the underlying
156	handle, the C<on_timeout> callback will be invoked (and if that one is	228	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
157	missing, a non-fatal C<ETIMEDOUT> error will be raised).	229	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		230	error will be raised).
		231
		232	There are three variants of the timeouts that work fully independent
		233	of each other, for both read and write, just read, and just write:
		234	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		235	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		236	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
158		237
159	Note that timeout processing is also active when you currently do not have	238	Note that timeout processing is also active when you currently do not have
160	any outstanding read or write requests: If you plan to keep the connection	239	any outstanding read or write requests: If you plan to keep the connection
161	idle then you should disable the timout temporarily or ignore the timeout	240	idle then you should disable the timout temporarily or ignore the timeout
162	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply	241	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
…		…
206	accomplishd by setting this option to a true value.	285	accomplishd by setting this option to a true value.
207		286
208	The default is your opertaing system's default behaviour (most likely	287	The default is your opertaing system's default behaviour (most likely
209	enabled), this option explicitly enables or disables it, if possible.	288	enabled), this option explicitly enables or disables it, if possible.
210		289
		290	=item keepalive => <boolean>
		291
		292	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		293	normally, TCP connections have no time-out once established, so TCP
		294	conenctions, once established, can stay alive forever even when the other
		295	side has long gone. TCP keepalives are a cheap way to take down long-lived
		296	TCP connections whent he other side becomes unreachable. While the default
		297	is OS-dependent, TCP keepalives usually kick in after around two hours,
		298	and, if the other side doesn't reply, take down the TCP connection some 10
		299	to 15 minutes later.
		300
		301	It is harmless to specify this option for file handles that do not support
		302	keepalives, and enabling it on connections that are potentially long-lived
		303	is usually a good idea.
		304
		305	=item oobinline => <boolean>
		306
		307	BSD majorly fucked up the implementation of TCP urgent data. The result
		308	is that almost no OS implements TCP according to the specs, and every OS
		309	implements it slightly differently.
		310
		311	If you want to handle TCP urgent data, then setting this flag (the default
		312	is enabled) gives you the most portable way of getting urgent data, by
		313	putting it into the stream.
		314
		315	Since BSD emulation of OOB data on top of TCP's urgent data can have
		316	security implications, AnyEvent::Handle sets this flag automatically
		317	unless explicitly specified. Note that setting this flag after
		318	establishing a connection I<may> be a bit too late (data loss could
		319	already have occured on BSD systems), but at least it will protect you
		320	from most attacks.
		321
211	=item read_size => <bytes>	322	=item read_size => <bytes>
212		323
213	The default read block size (the amount of bytes this module will	324	The default read block size (the amount of bytes this module will
214	try to read during each loop iteration, which affects memory	325	try to read during each loop iteration, which affects memory
215	requirements). Default: C<8192>.	326	requirements). Default: C<8192>.
…		…
235		346
236	This will not work for partial TLS data that could not be encoded	347	This will not work for partial TLS data that could not be encoded
237	yet. This data will be lost. Calling the C<stoptls> method in time might	348	yet. This data will be lost. Calling the C<stoptls> method in time might
238	help.	349	help.
239		350
		351	=item peername => $string
		352
		353	A string used to identify the remote site - usually the DNS hostname
		354	(I<not> IDN!) used to create the connection, rarely the IP address.
		355
		356	Apart from being useful in error messages, this string is also used in TLS
		357	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		358	verification will be skipped when C<peername> is not specified or
		359	C<undef>.
		360
240	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	361	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
241		362
242	When this parameter is given, it enables TLS (SSL) mode, that means	363	When this parameter is given, it enables TLS (SSL) mode, that means
243	AnyEvent will start a TLS handshake as soon as the conenction has been	364	AnyEvent will start a TLS handshake as soon as the conenction has been
244	established and will transparently encrypt/decrypt data afterwards.	365	established and will transparently encrypt/decrypt data afterwards.
		366
		367	All TLS protocol errors will be signalled as C<EPROTO>, with an
		368	appropriate error message.
245		369
246	TLS mode requires Net::SSLeay to be installed (it will be loaded	370	TLS mode requires Net::SSLeay to be installed (it will be loaded
247	automatically when you try to create a TLS handle): this module doesn't	371	automatically when you try to create a TLS handle): this module doesn't
248	have a dependency on that module, so if your module requires it, you have	372	have a dependency on that module, so if your module requires it, you have
249	to add the dependency yourself.	373	to add the dependency yourself.
…		…
253	mode.	377	mode.
254		378
255	You can also provide your own TLS connection object, but you have	379	You can also provide your own TLS connection object, but you have
256	to make sure that you call either C<Net::SSLeay::set_connect_state>	380	to make sure that you call either C<Net::SSLeay::set_connect_state>
257	or C<Net::SSLeay::set_accept_state> on it before you pass it to	381	or C<Net::SSLeay::set_accept_state> on it before you pass it to
258	AnyEvent::Handle.	382	AnyEvent::Handle. Also, this module will take ownership of this connection
		383	object.
		384
		385	At some future point, AnyEvent::Handle might switch to another TLS
		386	implementation, then the option to use your own session object will go
		387	away.
		388
		389	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		390	passing in the wrong integer will lead to certain crash. This most often
		391	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		392	segmentation fault.
259		393
260	See the C<< ->starttls >> method for when need to start TLS negotiation later.	394	See the C<< ->starttls >> method for when need to start TLS negotiation later.
261		395
262	=item tls_ctx => $ssl_ctx	396	=item tls_ctx => $anyevent_tls
263		397
264	Use the given C<Net::SSLeay::CTX> object to create the new TLS connection	398	Use the given C<AnyEvent::TLS> object to create the new TLS connection
265	(unless a connection object was specified directly). If this parameter is	399	(unless a connection object was specified directly). If this parameter is
266	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	400	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
		401
		402	Instead of an object, you can also specify a hash reference with C<< key
		403	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		404	new TLS context object.
		405
		406	=item on_starttls => $cb->($handle, $success[, $error_message])
		407
		408	This callback will be invoked when the TLS/SSL handshake has finished. If
		409	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		410	(C<on_stoptls> will not be called in this case).
		411
		412	The session in C<< $handle->{tls} >> can still be examined in this
		413	callback, even when the handshake was not successful.
		414
		415	TLS handshake failures will not cause C<on_error> to be invoked when this
		416	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		417
		418	Without this callback, handshake failures lead to C<on_error> being
		419	called, as normal.
		420
		421	Note that you cannot call C<starttls> right again in this callback. If you
		422	need to do that, start an zero-second timer instead whose callback can
		423	then call C<< ->starttls >> again.
		424
		425	=item on_stoptls => $cb->($handle)
		426
		427	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		428	set, then it will be invoked after freeing the TLS session. If it is not,
		429	then a TLS shutdown condition will be treated like a normal EOF condition
		430	on the handle.
		431
		432	The session in C<< $handle->{tls} >> can still be examined in this
		433	callback.
		434
		435	This callback will only be called on TLS shutdowns, not when the
		436	underlying handle signals EOF.
267		437
268	=item json => JSON or JSON::XS object	438	=item json => JSON or JSON::XS object
269		439
270	This is the json coder object used by the C<json> read and write types.	440	This is the json coder object used by the C<json> read and write types.
271		441
…		…
280		450
281	=cut	451	=cut
282		452
283	sub new {	453	sub new {
284	my $class = shift;	454	my $class = shift;
285
286	my $self = bless { @_ }, $class;	455	my $self = bless { @_ }, $class;
287		456
288	$self->{fh} or Carp::croak "mandatory argument fh is missing";	457	if ($self->{fh}) {
		458	$self->_start;
		459	return unless $self->{fh}; # could be gone by now
		460
		461	} elsif ($self->{connect}) {
		462	require AnyEvent::Socket;
		463
		464	$self->{peername} = $self->{connect}[0]
		465	unless exists $self->{peername};
		466
		467	$self->{_skip_drain_rbuf} = 1;
		468
		469	{
		470	Scalar::Util::weaken (my $self = $self);
		471
		472	$self->{_connect} =
		473	AnyEvent::Socket::tcp_connect (
		474	$self->{connect}[0],
		475	$self->{connect}[1],
		476	sub {
		477	my ($fh, $host, $port, $retry) = @_;
		478
		479	if ($fh) {
		480	$self->{fh} = $fh;
		481
		482	delete $self->{_skip_drain_rbuf};
		483	$self->_start;
		484
		485	$self->{on_connect}
		486	and $self->{on_connect}($self, $host, $port, sub {
		487	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		488	$self->{_skip_drain_rbuf} = 1;
		489	&$retry;
		490	});
		491
		492	} else {
		493	if ($self->{on_connect_error}) {
		494	$self->{on_connect_error}($self, "$!");
		495	$self->destroy;
		496	} else {
		497	$self->_error ($!, 1);
		498	}
		499	}
		500	},
		501	sub {
		502	local $self->{fh} = $_[0];
		503
		504	$self->{on_prepare}
		505	? $self->{on_prepare}->($self)
		506	: ()
		507	}
		508	);
		509	}
		510
		511	} else {
		512	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		513	}
		514
		515	$self
		516	}
		517
		518	sub _start {
		519	my ($self) = @_;
289		520
290	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	521	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
291		522
		523	$self->{_activity} =
		524	$self->{_ractivity} =
		525	$self->{_wactivity} = AE::now;
		526
		527	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		528	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		529	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		530
		531	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		532	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		533
		534	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		535
292	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})	536	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
293	if $self->{tls};	537	if $self->{tls};
294		538
295	$self->{_activity} = AnyEvent->now;
296	$self->_timeout;
297
298	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	539	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
299	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
300		540
301	$self->start_read	541	$self->start_read
302	if $self->{on_read};	542	if $self->{on_read} || @{ $self->{_queue} };
303		543
304	$self	544	$self->_drain_wbuf;
305	}
306
307	sub _shutdown {
308	my ($self) = @_;
309
310	delete $self->{_tw};
311	delete $self->{_rw};
312	delete $self->{_ww};
313	delete $self->{fh};
314
315	&_freetls;
316
317	delete $self->{on_read};
318	delete $self->{_queue};
319	}	545	}
320		546
321	sub _error {	547	sub _error {
322	my ($self, $errno, $fatal) = @_;	548	my ($self, $errno, $fatal, $message) = @_;
323
324	$self->_shutdown
325	if $fatal;
326		549
327	$! = $errno;	550	$! = $errno;
		551	$message ||= "$!";
328		552
329	if ($self->{on_error}) {	553	if ($self->{on_error}) {
330	$self->{on_error}($self, $fatal);	554	$self->{on_error}($self, $fatal, $message);
331	} else {	555	$self->destroy if $fatal;
		556	} elsif ($self->{fh}) {
		557	$self->destroy;
332	Carp::croak "AnyEvent::Handle uncaught error: $!";	558	Carp::croak "AnyEvent::Handle uncaught error: $message";
333	}	559	}
334	}	560	}
335		561
336	=item $fh = $handle->fh	562	=item $fh = $handle->fh
337		563
…		…
361	$_[0]{on_eof} = $_[1];	587	$_[0]{on_eof} = $_[1];
362	}	588	}
363		589
364	=item $handle->on_timeout ($cb)	590	=item $handle->on_timeout ($cb)
365		591
366	Replace the current C<on_timeout> callback, or disables the callback (but	592	=item $handle->on_rtimeout ($cb)
367	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
368	argument and method.
369		593
370	=cut	594	=item $handle->on_wtimeout ($cb)
371		595
372	sub on_timeout {	596	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
373	$_[0]{on_timeout} = $_[1];	597	callback, or disables the callback (but not the timeout) if C<$cb> =
374	}	598	C<undef>. See the C<timeout> constructor argument and method.
		599
		600	=cut
		601
		602	# see below
375		603
376	=item $handle->autocork ($boolean)	604	=item $handle->autocork ($boolean)
377		605
378	Enables or disables the current autocork behaviour (see C<autocork>	606	Enables or disables the current autocork behaviour (see C<autocork>
379	constructor argument).	607	constructor argument). Changes will only take effect on the next write.
380		608
381	=cut	609	=cut
		610
		611	sub autocork {
		612	$_[0]{autocork} = $_[1];
		613	}
382		614
383	=item $handle->no_delay ($boolean)	615	=item $handle->no_delay ($boolean)
384		616
385	Enables or disables the C<no_delay> setting (see constructor argument of	617	Enables or disables the C<no_delay> setting (see constructor argument of
386	the same name for details).	618	the same name for details).
…		…
390	sub no_delay {	622	sub no_delay {
391	$_[0]{no_delay} = $_[1];	623	$_[0]{no_delay} = $_[1];
392		624
393	eval {	625	eval {
394	local $SIG{__DIE__};	626	local $SIG{__DIE__};
395	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	627	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		628	if $_[0]{fh};
396	};	629	};
397	}	630	}
398		631
		632	=item $handle->keepalive ($boolean)
		633
		634	Enables or disables the C<keepalive> setting (see constructor argument of
		635	the same name for details).
		636
		637	=cut
		638
		639	sub keepalive {
		640	$_[0]{keepalive} = $_[1];
		641
		642	eval {
		643	local $SIG{__DIE__};
		644	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		645	if $_[0]{fh};
		646	};
		647	}
		648
		649	=item $handle->oobinline ($boolean)
		650
		651	Enables or disables the C<oobinline> setting (see constructor argument of
		652	the same name for details).
		653
		654	=cut
		655
		656	sub oobinline {
		657	$_[0]{oobinline} = $_[1];
		658
		659	eval {
		660	local $SIG{__DIE__};
		661	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		662	if $_[0]{fh};
		663	};
		664	}
		665
		666	=item $handle->keepalive ($boolean)
		667
		668	Enables or disables the C<keepalive> setting (see constructor argument of
		669	the same name for details).
		670
		671	=cut
		672
		673	sub keepalive {
		674	$_[0]{keepalive} = $_[1];
		675
		676	eval {
		677	local $SIG{__DIE__};
		678	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		679	if $_[0]{fh};
		680	};
		681	}
		682
		683	=item $handle->on_starttls ($cb)
		684
		685	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		686
		687	=cut
		688
		689	sub on_starttls {
		690	$_[0]{on_starttls} = $_[1];
		691	}
		692
		693	=item $handle->on_stoptls ($cb)
		694
		695	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		696
		697	=cut
		698
		699	sub on_starttls {
		700	$_[0]{on_stoptls} = $_[1];
		701	}
		702
		703	=item $handle->rbuf_max ($max_octets)
		704
		705	Configures the C<rbuf_max> setting (C<undef> disables it).
		706
		707	=cut
		708
		709	sub rbuf_max {
		710	$_[0]{rbuf_max} = $_[1];
		711	}
		712
399	#############################################################################	713	#############################################################################
400		714
401	=item $handle->timeout ($seconds)	715	=item $handle->timeout ($seconds)
402		716
		717	=item $handle->rtimeout ($seconds)
		718
		719	=item $handle->wtimeout ($seconds)
		720
403	Configures (or disables) the inactivity timeout.	721	Configures (or disables) the inactivity timeout.
404		722
405	=cut	723	=item $handle->timeout_reset
406		724
407	sub timeout {	725	=item $handle->rtimeout_reset
		726
		727	=item $handle->wtimeout_reset
		728
		729	Reset the activity timeout, as if data was received or sent.
		730
		731	These methods are cheap to call.
		732
		733	=cut
		734
		735	for my $dir ("", "r", "w") {
		736	my $timeout = "${dir}timeout";
		737	my $tw = "_${dir}tw";
		738	my $on_timeout = "on_${dir}timeout";
		739	my $activity = "_${dir}activity";
		740	my $cb;
		741
		742	*$on_timeout = sub {
		743	$_[0]{$on_timeout} = $_[1];
		744	};
		745
		746	*$timeout = sub {
408	my ($self, $timeout) = @_;	747	my ($self, $new_value) = @_;
409		748
410	$self->{timeout} = $timeout;	749	$self->{$timeout} = $new_value;
411	$self->_timeout;	750	delete $self->{$tw}; &$cb;
412	}	751	};
413		752
		753	*{"${dir}timeout_reset"} = sub {
		754	$_[0]{$activity} = AE::now;
		755	};
		756
		757	# main workhorse:
414	# reset the timeout watcher, as neccessary	758	# reset the timeout watcher, as neccessary
415	# also check for time-outs	759	# also check for time-outs
416	sub _timeout {	760	$cb = sub {
417	my ($self) = @_;	761	my ($self) = @_;
418		762
419	if ($self->{timeout}) {	763	if ($self->{$timeout} && $self->{fh}) {
420	my $NOW = AnyEvent->now;	764	my $NOW = AE::now;
421		765
422	# when would the timeout trigger?	766	# when would the timeout trigger?
423	my $after = $self->{_activity} + $self->{timeout} - $NOW;	767	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
424		768
425	# now or in the past already?	769	# now or in the past already?
426	if ($after <= 0) {	770	if ($after <= 0) {
427	$self->{_activity} = $NOW;	771	$self->{$activity} = $NOW;
428		772
429	if ($self->{on_timeout}) {	773	if ($self->{$on_timeout}) {
430	$self->{on_timeout}($self);	774	$self->{$on_timeout}($self);
431	} else {	775	} else {
432	$self->_error (&Errno::ETIMEDOUT);	776	$self->_error (Errno::ETIMEDOUT);
		777	}
		778
		779	# callback could have changed timeout value, optimise
		780	return unless $self->{$timeout};
		781
		782	# calculate new after
		783	$after = $self->{$timeout};
433	}	784	}
434		785
435	# callback could have changed timeout value, optimise	786	Scalar::Util::weaken $self;
436	return unless $self->{timeout};	787	return unless $self; # ->error could have destroyed $self
437		788
438	# calculate new after	789	$self->{$tw} ||= AE::timer $after, 0, sub {
439	$after = $self->{timeout};	790	delete $self->{$tw};
		791	$cb->($self);
		792	};
		793	} else {
		794	delete $self->{$tw};
440	}	795	}
441
442	Scalar::Util::weaken $self;
443	return unless $self; # ->error could have destroyed $self
444
445	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
446	delete $self->{_tw};
447	$self->_timeout;
448	});
449	} else {
450	delete $self->{_tw};
451	}	796	}
452	}	797	}
453		798
454	#############################################################################	799	#############################################################################
455		800
…		…
500	Scalar::Util::weaken $self;	845	Scalar::Util::weaken $self;
501		846
502	my $cb = sub {	847	my $cb = sub {
503	my $len = syswrite $self->{fh}, $self->{wbuf};	848	my $len = syswrite $self->{fh}, $self->{wbuf};
504		849
505	if ($len >= 0) {	850	if (defined $len) {
506	substr $self->{wbuf}, 0, $len, "";	851	substr $self->{wbuf}, 0, $len, "";
507		852
508	$self->{_activity} = AnyEvent->now;	853	$self->{_activity} = $self->{_wactivity} = AE::now;
509		854
510	$self->{on_drain}($self)	855	$self->{on_drain}($self)
511	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})	856	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
512	&& $self->{on_drain};	857	&& $self->{on_drain};
513		858
…		…
519		864
520	# try to write data immediately	865	# try to write data immediately
521	$cb->() unless $self->{autocork};	866	$cb->() unless $self->{autocork};
522		867
523	# if still data left in wbuf, we need to poll	868	# if still data left in wbuf, we need to poll
524	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	869	$self->{_ww} = AE::io $self->{fh}, 1, $cb
525	if length $self->{wbuf};	870	if length $self->{wbuf};
526	};	871	};
527	}	872	}
528		873
529	our %WH;	874	our %WH;
…		…
542	->($self, @_);	887	->($self, @_);
543	}	888	}
544		889
545	if ($self->{tls}) {	890	if ($self->{tls}) {
546	$self->{_tls_wbuf} .= $_[0];	891	$self->{_tls_wbuf} .= $_[0];
547		892	&_dotls ($self) if $self->{fh};
548	&_dotls ($self);
549	} else {	893	} else {
550	$self->{wbuf} .= $_[0];	894	$self->{wbuf} .= $_[0];
551	$self->_drain_wbuf;	895	$self->_drain_wbuf if $self->{fh};
552	}	896	}
553	}	897	}
554		898
555	=item $handle->push_write (type => @args)	899	=item $handle->push_write (type => @args)
556		900
…		…
620	Other languages could read single lines terminated by a newline and pass	964	Other languages could read single lines terminated by a newline and pass
621	this line into their JSON decoder of choice.	965	this line into their JSON decoder of choice.
622		966
623	=cut	967	=cut
624		968
		969	sub json_coder() {
		970	eval { require JSON::XS; JSON::XS->new->utf8 }
		971	|| do { require JSON; JSON->new->utf8 }
		972	}
		973
625	register_write_type json => sub {	974	register_write_type json => sub {
626	my ($self, $ref) = @_;	975	my ($self, $ref) = @_;
627		976
628	require JSON;	977	my $json = $self->{json} ||= json_coder;
629		978
630	$self->{json} ? $self->{json}->encode ($ref)	979	$json->encode ($ref)
631	: JSON::encode_json ($ref)
632	};	980	};
633		981
634	=item storable => $reference	982	=item storable => $reference
635		983
636	Freezes the given reference using L<Storable> and writes it to the	984	Freezes the given reference using L<Storable> and writes it to the
…		…
645		993
646	pack "w/a*", Storable::nfreeze ($ref)	994	pack "w/a*", Storable::nfreeze ($ref)
647	};	995	};
648		996
649	=back	997	=back
		998
		999	=item $handle->push_shutdown
		1000
		1001	Sometimes you know you want to close the socket after writing your data
		1002	before it was actually written. One way to do that is to replace your
		1003	C<on_drain> handler by a callback that shuts down the socket (and set
		1004	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1005	replaces the C<on_drain> callback with:
		1006
		1007	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		1008
		1009	This simply shuts down the write side and signals an EOF condition to the
		1010	the peer.
		1011
		1012	You can rely on the normal read queue and C<on_eof> handling
		1013	afterwards. This is the cleanest way to close a connection.
		1014
		1015	=cut
		1016
		1017	sub push_shutdown {
		1018	my ($self) = @_;
		1019
		1020	delete $self->{low_water_mark};
		1021	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1022	}
650		1023
651	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1024	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
652		1025
653	This function (not method) lets you add your own types to C<push_write>.	1026	This function (not method) lets you add your own types to C<push_write>.
654	Whenever the given C<type> is used, C<push_write> will invoke the code	1027	Whenever the given C<type> is used, C<push_write> will invoke the code
…		…
748	=cut	1121	=cut
749		1122
750	sub _drain_rbuf {	1123	sub _drain_rbuf {
751	my ($self) = @_;	1124	my ($self) = @_;
752		1125
		1126	# avoid recursion
		1127	return if $self->{_skip_drain_rbuf};
753	local $self->{_in_drain} = 1;	1128	local $self->{_skip_drain_rbuf} = 1;
754
755	if (
756	defined $self->{rbuf_max}
757	&& $self->{rbuf_max} < length $self->{rbuf}
758	) {
759	$self->_error (&Errno::ENOSPC, 1), return;
760	}
761		1129
762	while () {	1130	while () {
		1131	# we need to use a separate tls read buffer, as we must not receive data while
		1132	# we are draining the buffer, and this can only happen with TLS.
		1133	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1134	if exists $self->{_tls_rbuf};
		1135
763	my $len = length $self->{rbuf};	1136	my $len = length $self->{rbuf};
764		1137
765	if (my $cb = shift @{ $self->{_queue} }) {	1138	if (my $cb = shift @{ $self->{_queue} }) {
766	unless ($cb->($self)) {	1139	unless ($cb->($self)) {
767	if ($self->{_eof}) {	1140	# no progress can be made
768	# no progress can be made (not enough data and no data forthcoming)	1141	# (not enough data and no data forthcoming)
769	$self->_error (&Errno::EPIPE, 1), return;	1142	$self->_error (Errno::EPIPE, 1), return
770	}	1143	if $self->{_eof};
771		1144
772	unshift @{ $self->{_queue} }, $cb;	1145	unshift @{ $self->{_queue} }, $cb;
773	last;	1146	last;
774	}	1147	}
775	} elsif ($self->{on_read}) {	1148	} elsif ($self->{on_read}) {
…		…
782	&& !@{ $self->{_queue} } # and the queue is still empty	1155	&& !@{ $self->{_queue} } # and the queue is still empty
783	&& $self->{on_read} # but we still have on_read	1156	&& $self->{on_read} # but we still have on_read
784	) {	1157	) {
785	# no further data will arrive	1158	# no further data will arrive
786	# so no progress can be made	1159	# so no progress can be made
787	$self->_error (&Errno::EPIPE, 1), return	1160	$self->_error (Errno::EPIPE, 1), return
788	if $self->{_eof};	1161	if $self->{_eof};
789		1162
790	last; # more data might arrive	1163	last; # more data might arrive
791	}	1164	}
792	} else {	1165	} else {
…		…
795	last;	1168	last;
796	}	1169	}
797	}	1170	}
798		1171
799	if ($self->{_eof}) {	1172	if ($self->{_eof}) {
800	if ($self->{on_eof}) {	1173	$self->{on_eof}
801	$self->{on_eof}($self)	1174	? $self->{on_eof}($self)
802	} else {	1175	: $self->_error (0, 1, "Unexpected end-of-file");
803	$self->_error (0, 1);	1176
804	}	1177	return;
		1178	}
		1179
		1180	if (
		1181	defined $self->{rbuf_max}
		1182	&& $self->{rbuf_max} < length $self->{rbuf}
		1183	) {
		1184	$self->_error (Errno::ENOSPC, 1), return;
805	}	1185	}
806		1186
807	# may need to restart read watcher	1187	# may need to restart read watcher
808	unless ($self->{_rw}) {	1188	unless ($self->{_rw}) {
809	$self->start_read	1189	$self->start_read
…		…
821		1201
822	sub on_read {	1202	sub on_read {
823	my ($self, $cb) = @_;	1203	my ($self, $cb) = @_;
824		1204
825	$self->{on_read} = $cb;	1205	$self->{on_read} = $cb;
826	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1206	$self->_drain_rbuf if $cb;
827	}	1207	}
828		1208
829	=item $handle->rbuf	1209	=item $handle->rbuf
830		1210
831	Returns the read buffer (as a modifiable lvalue).	1211	Returns the read buffer (as a modifiable lvalue).
832		1212
833	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1213	You can access the read buffer directly as the C<< ->{rbuf} >>
834	you want.	1214	member, if you want. However, the only operation allowed on the
		1215	read buffer (apart from looking at it) is removing data from its
		1216	beginning. Otherwise modifying or appending to it is not allowed and will
		1217	lead to hard-to-track-down bugs.
835		1218
836	NOTE: The read buffer should only be used or modified if the C<on_read>,	1219	NOTE: The read buffer should only be used or modified if the C<on_read>,
837	C<push_read> or C<unshift_read> methods are used. The other read methods	1220	C<push_read> or C<unshift_read> methods are used. The other read methods
838	automatically manage the read buffer.	1221	automatically manage the read buffer.
839		1222
…		…
880	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1263	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")
881	->($self, $cb, @_);	1264	->($self, $cb, @_);
882	}	1265	}
883		1266
884	push @{ $self->{_queue} }, $cb;	1267	push @{ $self->{_queue} }, $cb;
885	$self->_drain_rbuf unless $self->{_in_drain};	1268	$self->_drain_rbuf;
886	}	1269	}
887		1270
888	sub unshift_read {	1271	sub unshift_read {
889	my $self = shift;	1272	my $self = shift;
890	my $cb = pop;	1273	my $cb = pop;
…		…
894		1277
895	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1278	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
896	->($self, $cb, @_);	1279	->($self, $cb, @_);
897	}	1280	}
898		1281
899
900	unshift @{ $self->{_queue} }, $cb;	1282	unshift @{ $self->{_queue} }, $cb;
901	$self->_drain_rbuf unless $self->{_in_drain};	1283	$self->_drain_rbuf;
902	}	1284	}
903		1285
904	=item $handle->push_read (type => @args, $cb)	1286	=item $handle->push_read (type => @args, $cb)
905		1287
906	=item $handle->unshift_read (type => @args, $cb)	1288	=item $handle->unshift_read (type => @args, $cb)
…		…
1039	return 1;	1421	return 1;
1040	}	1422	}
1041		1423
1042	# reject	1424	# reject
1043	if ($reject && $$rbuf =~ $reject) {	1425	if ($reject && $$rbuf =~ $reject) {
1044	$self->_error (&Errno::EBADMSG);	1426	$self->_error (Errno::EBADMSG);
1045	}	1427	}
1046		1428
1047	# skip	1429	# skip
1048	if ($skip && $$rbuf =~ $skip) {	1430	if ($skip && $$rbuf =~ $skip) {
1049	$data .= substr $$rbuf, 0, $+[0], "";	1431	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1065	my ($self, $cb) = @_;	1447	my ($self, $cb) = @_;
1066		1448
1067	sub {	1449	sub {
1068	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1450	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1069	if ($_[0]{rbuf} =~ /[^0-9]/) {	1451	if ($_[0]{rbuf} =~ /[^0-9]/) {
1070	$self->_error (&Errno::EBADMSG);	1452	$self->_error (Errno::EBADMSG);
1071	}	1453	}
1072	return;	1454	return;
1073	}	1455	}
1074		1456
1075	my $len = $1;	1457	my $len = $1;
…		…
1078	my $string = $_[1];	1460	my $string = $_[1];
1079	$_[0]->unshift_read (chunk => 1, sub {	1461	$_[0]->unshift_read (chunk => 1, sub {
1080	if ($_[1] eq ",") {	1462	if ($_[1] eq ",") {
1081	$cb->($_[0], $string);	1463	$cb->($_[0], $string);
1082	} else {	1464	} else {
1083	$self->_error (&Errno::EBADMSG);	1465	$self->_error (Errno::EBADMSG);
1084	}	1466	}
1085	});	1467	});
1086	});	1468	});
1087		1469
1088	1	1470	1
…		…
1135	}	1517	}
1136	};	1518	};
1137		1519
1138	=item json => $cb->($handle, $hash_or_arrayref)	1520	=item json => $cb->($handle, $hash_or_arrayref)
1139		1521
1140	Reads a JSON object or array, decodes it and passes it to the callback.	1522	Reads a JSON object or array, decodes it and passes it to the
		1523	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1141		1524
1142	If a C<json> object was passed to the constructor, then that will be used	1525	If a C<json> object was passed to the constructor, then that will be used
1143	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1526	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1144		1527
1145	This read type uses the incremental parser available with JSON version	1528	This read type uses the incremental parser available with JSON version
…		…
1154	=cut	1537	=cut
1155		1538
1156	register_read_type json => sub {	1539	register_read_type json => sub {
1157	my ($self, $cb) = @_;	1540	my ($self, $cb) = @_;
1158		1541
1159	require JSON;	1542	my $json = $self->{json} ||= json_coder;
1160		1543
1161	my $data;	1544	my $data;
1162	my $rbuf = \$self->{rbuf};	1545	my $rbuf = \$self->{rbuf};
1163		1546
1164	my $json = $self->{json} ||= JSON->new->utf8;
1165
1166	sub {	1547	sub {
1167	my $ref = $json->incr_parse ($self->{rbuf});	1548	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1168		1549
1169	if ($ref) {	1550	if ($ref) {
1170	$self->{rbuf} = $json->incr_text;	1551	$self->{rbuf} = $json->incr_text;
1171	$json->incr_text = "";	1552	$json->incr_text = "";
1172	$cb->($self, $ref);	1553	$cb->($self, $ref);
1173		1554
1174	1	1555	1
		1556	} elsif ($@) {
		1557	# error case
		1558	$json->incr_skip;
		1559
		1560	$self->{rbuf} = $json->incr_text;
		1561	$json->incr_text = "";
		1562
		1563	$self->_error (Errno::EBADMSG);
		1564
		1565	()
1175	} else {	1566	} else {
1176	$self->{rbuf} = "";	1567	$self->{rbuf} = "";
		1568
1177	()	1569	()
1178	}	1570	}
1179	}	1571	}
1180	};	1572	};
1181		1573
…		…
1213	# read remaining chunk	1605	# read remaining chunk
1214	$_[0]->unshift_read (chunk => $len, sub {	1606	$_[0]->unshift_read (chunk => $len, sub {
1215	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1607	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1216	$cb->($_[0], $ref);	1608	$cb->($_[0], $ref);
1217	} else {	1609	} else {
1218	$self->_error (&Errno::EBADMSG);	1610	$self->_error (Errno::EBADMSG);
1219	}	1611	}
1220	});	1612	});
1221	}	1613	}
1222		1614
1223	1	1615	1
…		…
1275	my ($self) = @_;	1667	my ($self) = @_;
1276		1668
1277	unless ($self->{_rw} || $self->{_eof}) {	1669	unless ($self->{_rw} || $self->{_eof}) {
1278	Scalar::Util::weaken $self;	1670	Scalar::Util::weaken $self;
1279		1671
1280	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1672	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1281	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});	1673	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1282	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1674	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
1283		1675
1284	if ($len > 0) {	1676	if ($len > 0) {
1285	$self->{_activity} = AnyEvent->now;	1677	$self->{_activity} = $self->{_ractivity} = AE::now;
1286		1678
1287	if ($self->{tls}) {	1679	if ($self->{tls}) {
1288	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);	1680	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1289		1681
1290	&_dotls ($self);	1682	&_dotls ($self);
1291	} else {	1683	} else {
1292	$self->_drain_rbuf unless $self->{_in_drain};	1684	$self->_drain_rbuf;
1293	}	1685	}
1294		1686
1295	} elsif (defined $len) {	1687	} elsif (defined $len) {
1296	delete $self->{_rw};	1688	delete $self->{_rw};
1297	$self->{_eof} = 1;	1689	$self->{_eof} = 1;
1298	$self->_drain_rbuf unless $self->{_in_drain};	1690	$self->_drain_rbuf;
1299		1691
1300	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1692	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1301	return $self->_error ($!, 1);	1693	return $self->_error ($!, 1);
1302	}	1694	}
1303	});	1695	};
		1696	}
		1697	}
		1698
		1699	our $ERROR_SYSCALL;
		1700	our $ERROR_WANT_READ;
		1701
		1702	sub _tls_error {
		1703	my ($self, $err) = @_;
		1704
		1705	return $self->_error ($!, 1)
		1706	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1707
		1708	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1709
		1710	# reduce error string to look less scary
		1711	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1712
		1713	if ($self->{_on_starttls}) {
		1714	(delete $self->{_on_starttls})->($self, undef, $err);
		1715	&_freetls;
		1716	} else {
		1717	&_freetls;
		1718	$self->_error (Errno::EPROTO, 1, $err);
1304	}	1719	}
1305	}	1720	}
1306		1721
1307	# poll the write BIO and send the data if applicable	1722	# poll the write BIO and send the data if applicable
		1723	# also decode read data if possible
		1724	# this is basiclaly our TLS state machine
		1725	# more efficient implementations are possible with openssl,
		1726	# but not with the buggy and incomplete Net::SSLeay.
1308	sub _dotls {	1727	sub _dotls {
1309	my ($self) = @_;	1728	my ($self) = @_;
1310		1729
1311	my $tmp;	1730	my $tmp;
1312		1731
1313	if (length $self->{_tls_wbuf}) {	1732	if (length $self->{_tls_wbuf}) {
1314	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1733	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1315	substr $self->{_tls_wbuf}, 0, $tmp, "";	1734	substr $self->{_tls_wbuf}, 0, $tmp, "";
1316	}	1735	}
		1736
		1737	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1738	return $self->_tls_error ($tmp)
		1739	if $tmp != $ERROR_WANT_READ
		1740	&& ($tmp != $ERROR_SYSCALL || $!);
1317	}	1741	}
1318		1742
1319	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {	1743	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
1320	unless (length $tmp) {	1744	unless (length $tmp) {
1321	# let's treat SSL-eof as we treat normal EOF	1745	$self->{_on_starttls}
1322	delete $self->{_rw};	1746	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
1323	$self->{_eof} = 1;
1324	&_freetls;	1747	&_freetls;
		1748
		1749	if ($self->{on_stoptls}) {
		1750	$self->{on_stoptls}($self);
		1751	return;
		1752	} else {
		1753	# let's treat SSL-eof as we treat normal EOF
		1754	delete $self->{_rw};
		1755	$self->{_eof} = 1;
		1756	}
1325	}	1757	}
1326		1758
1327	$self->{rbuf} .= $tmp;	1759	$self->{_tls_rbuf} .= $tmp;
1328	$self->_drain_rbuf unless $self->{_in_drain};	1760	$self->_drain_rbuf;
1329	$self->{tls} or return; # tls session might have gone away in callback	1761	$self->{tls} or return; # tls session might have gone away in callback
1330	}	1762	}
1331		1763
1332	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);	1764	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
1333
1334	if ($tmp != Net::SSLeay::ERROR_WANT_READ ()) {
1335	if ($tmp == Net::SSLeay::ERROR_SYSCALL ()) {
1336	return $self->_error ($!, 1);	1765	return $self->_tls_error ($tmp)
1337	} elsif ($tmp == Net::SSLeay::ERROR_SSL ()) {	1766	if $tmp != $ERROR_WANT_READ
1338	return $self->_error (&Errno::EIO, 1);	1767	&& ($tmp != $ERROR_SYSCALL || $!);
1339	}
1340
1341	# all other errors are fine for our purposes
1342	}
1343		1768
1344	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1769	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1345	$self->{wbuf} .= $tmp;	1770	$self->{wbuf} .= $tmp;
1346	$self->_drain_wbuf;	1771	$self->_drain_wbuf;
1347	}	1772	}
		1773
		1774	$self->{_on_starttls}
		1775	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
		1776	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1348	}	1777	}
1349		1778
1350	=item $handle->starttls ($tls[, $tls_ctx])	1779	=item $handle->starttls ($tls[, $tls_ctx])
1351		1780
1352	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1781	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1353	object is created, you can also do that at a later time by calling	1782	object is created, you can also do that at a later time by calling
1354	C<starttls>.	1783	C<starttls>.
1355		1784
		1785	Starting TLS is currently an asynchronous operation - when you push some
		1786	write data and then call C<< ->starttls >> then TLS negotiation will start
		1787	immediately, after which the queued write data is then sent.
		1788
1356	The first argument is the same as the C<tls> constructor argument (either	1789	The first argument is the same as the C<tls> constructor argument (either
1357	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1790	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1358		1791
1359	The second argument is the optional C<Net::SSLeay::CTX> object that is	1792	The second argument is the optional C<AnyEvent::TLS> object that is used
1360	used when AnyEvent::Handle has to create its own TLS connection object.	1793	when AnyEvent::Handle has to create its own TLS connection object, or
		1794	a hash reference with C<< key => value >> pairs that will be used to
		1795	construct a new context.
1361		1796
1362	The TLS connection object will end up in C<< $handle->{tls} >> after this	1797	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1363	call and can be used or changed to your liking. Note that the handshake	1798	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1364	might have already started when this function returns.	1799	changed to your liking. Note that the handshake might have already started
		1800	when this function returns.
1365		1801
1366	If it an error to start a TLS handshake more than once per	1802	Due to bugs in OpenSSL, it might or might not be possible to do multiple
1367	AnyEvent::Handle object (this is due to bugs in OpenSSL).	1803	handshakes on the same stream. Best do not attempt to use the stream after
		1804	stopping TLS.
1368		1805
1369	=cut	1806	=cut
		1807
		1808	our %TLS_CACHE; #TODO not yet documented, should we?
1370		1809
1371	sub starttls {	1810	sub starttls {
1372	my ($self, $ssl, $ctx) = @_;	1811	my ($self, $tls, $ctx) = @_;
		1812
		1813	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1814	if $self->{tls};
		1815
		1816	$self->{tls} = $tls;
		1817	$self->{tls_ctx} = $ctx if @_ > 2;
		1818
		1819	return unless $self->{fh};
1373		1820
1374	require Net::SSLeay;	1821	require Net::SSLeay;
1375		1822
1376	Carp::croak "it is an error to call starttls more than once on an Anyevent::Handle object"	1823	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
1377	if $self->{tls};	1824	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1825
		1826	$tls = delete $self->{tls};
		1827	$ctx = $self->{tls_ctx};
		1828
		1829	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1830
		1831	if ("HASH" eq ref $ctx) {
		1832	require AnyEvent::TLS;
		1833
		1834	if ($ctx->{cache}) {
		1835	my $key = $ctx+0;
		1836	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1837	} else {
		1838	$ctx = new AnyEvent::TLS %$ctx;
		1839	}
		1840	}
1378		1841
1379	if ($ssl eq "accept") {	1842	$self->{tls_ctx} = $ctx || TLS_CTX ();
1380	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1843	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1381	Net::SSLeay::set_accept_state ($ssl);
1382	} elsif ($ssl eq "connect") {
1383	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());
1384	Net::SSLeay::set_connect_state ($ssl);
1385	}
1386
1387	$self->{tls} = $ssl;
1388		1844
1389	# basically, this is deep magic (because SSL_read should have the same issues)	1845	# basically, this is deep magic (because SSL_read should have the same issues)
1390	# but the openssl maintainers basically said: "trust us, it just works".	1846	# but the openssl maintainers basically said: "trust us, it just works".
1391	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1847	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1392	# and mismaintained ssleay-module doesn't even offer them).	1848	# and mismaintained ssleay-module doesn't even offer them).
…		…
1396	#	1852	#
1397	# note that we do not try to keep the length constant between writes as we are required to do.	1853	# note that we do not try to keep the length constant between writes as we are required to do.
1398	# we assume that most (but not all) of this insanity only applies to non-blocking cases,	1854	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
1399	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to	1855	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
1400	# have identity issues in that area.	1856	# have identity issues in that area.
1401	Net::SSLeay::CTX_set_mode ($self->{tls},	1857	# Net::SSLeay::CTX_set_mode ($ssl,
1402	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1858	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1403	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1859	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1860	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1404		1861
1405	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1862	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1406	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1863	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1407		1864
		1865	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1866
1408	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1867	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
		1868
		1869	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
		1870	if $self->{on_starttls};
1409		1871
1410	&_dotls; # need to trigger the initial handshake	1872	&_dotls; # need to trigger the initial handshake
1411	$self->start_read; # make sure we actually do read	1873	$self->start_read; # make sure we actually do read
1412	}	1874	}
1413		1875
1414	=item $handle->stoptls	1876	=item $handle->stoptls
1415		1877
1416	Shuts down the SSL connection - this makes a proper EOF handshake by	1878	Shuts down the SSL connection - this makes a proper EOF handshake by
1417	sending a close notify to the other side, but since OpenSSL doesn't	1879	sending a close notify to the other side, but since OpenSSL doesn't
1418	support non-blocking shut downs, it is not possible to re-use the stream	1880	support non-blocking shut downs, it is not guarenteed that you can re-use
1419	afterwards.	1881	the stream afterwards.
1420		1882
1421	=cut	1883	=cut
1422		1884
1423	sub stoptls {	1885	sub stoptls {
1424	my ($self) = @_;	1886	my ($self) = @_;
…		…
1426	if ($self->{tls}) {	1888	if ($self->{tls}) {
1427	Net::SSLeay::shutdown ($self->{tls});	1889	Net::SSLeay::shutdown ($self->{tls});
1428		1890
1429	&_dotls;	1891	&_dotls;
1430		1892
1431	# we don't give a shit. no, we do, but we can't. no...	1893	# # we don't give a shit. no, we do, but we can't. no...#d#
1432	# we, we... have to use openssl :/	1894	# # we, we... have to use openssl :/#d#
1433	&_freetls;	1895	# &_freetls;#d#
1434	}	1896	}
1435	}	1897	}
1436		1898
1437	sub _freetls {	1899	sub _freetls {
1438	my ($self) = @_;	1900	my ($self) = @_;
1439		1901
1440	return unless $self->{tls};	1902	return unless $self->{tls};
1441		1903
1442	Net::SSLeay::free (delete $self->{tls});	1904	$self->{tls_ctx}->_put_session (delete $self->{tls})
		1905	if $self->{tls} > 0;
1443		1906
1444	delete @$self{qw(_rbio _wbio _tls_wbuf)};	1907	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1445	}	1908	}
1446		1909
1447	sub DESTROY {	1910	sub DESTROY {
1448	my $self = shift;	1911	my ($self) = @_;
1449		1912
1450	&_freetls;	1913	&_freetls;
1451		1914
1452	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	1915	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1453		1916
1454	if ($linger && length $self->{wbuf}) {	1917	if ($linger && length $self->{wbuf} && $self->{fh}) {
1455	my $fh = delete $self->{fh};	1918	my $fh = delete $self->{fh};
1456	my $wbuf = delete $self->{wbuf};	1919	my $wbuf = delete $self->{wbuf};
1457		1920
1458	my @linger;	1921	my @linger;
1459		1922
1460	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	1923	push @linger, AE::io $fh, 1, sub {
1461	my $len = syswrite $fh, $wbuf, length $wbuf;	1924	my $len = syswrite $fh, $wbuf, length $wbuf;
1462		1925
1463	if ($len > 0) {	1926	if ($len > 0) {
1464	substr $wbuf, 0, $len, "";	1927	substr $wbuf, 0, $len, "";
1465	} else {	1928	} else {
1466	@linger = (); # end	1929	@linger = (); # end
1467	}	1930	}
1468	});	1931	};
1469	push @linger, AnyEvent->timer (after => $linger, cb => sub {	1932	push @linger, AE::timer $linger, 0, sub {
1470	@linger = ();	1933	@linger = ();
1471	});	1934	};
1472	}	1935	}
		1936	}
		1937
		1938	=item $handle->destroy
		1939
		1940	Shuts down the handle object as much as possible - this call ensures that
		1941	no further callbacks will be invoked and as many resources as possible
		1942	will be freed. Any method you will call on the handle object after
		1943	destroying it in this way will be silently ignored (and it will return the
		1944	empty list).
		1945
		1946	Normally, you can just "forget" any references to an AnyEvent::Handle
		1947	object and it will simply shut down. This works in fatal error and EOF
		1948	callbacks, as well as code outside. It does I<NOT> work in a read or write
		1949	callback, so when you want to destroy the AnyEvent::Handle object from
		1950	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		1951	that case.
		1952
		1953	Destroying the handle object in this way has the advantage that callbacks
		1954	will be removed as well, so if those are the only reference holders (as
		1955	is common), then one doesn't need to do anything special to break any
		1956	reference cycles.
		1957
		1958	The handle might still linger in the background and write out remaining
		1959	data, as specified by the C<linger> option, however.
		1960
		1961	=cut
		1962
		1963	sub destroy {
		1964	my ($self) = @_;
		1965
		1966	$self->DESTROY;
		1967	%$self = ();
		1968	bless $self, "AnyEvent::Handle::destroyed";
		1969	}
		1970
		1971	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		1972	#nop
1473	}	1973	}
1474		1974
1475	=item AnyEvent::Handle::TLS_CTX	1975	=item AnyEvent::Handle::TLS_CTX
1476		1976
1477	This function creates and returns the Net::SSLeay::CTX object used by	1977	This function creates and returns the AnyEvent::TLS object used by default
1478	default for TLS mode.	1978	for TLS mode.
1479		1979
1480	The context is created like this:	1980	The context is created by calling L<AnyEvent::TLS> without any arguments.
1481
1482	Net::SSLeay::load_error_strings;
1483	Net::SSLeay::SSLeay_add_ssl_algorithms;
1484	Net::SSLeay::randomize;
1485
1486	my $CTX = Net::SSLeay::CTX_new;
1487
1488	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1489		1981
1490	=cut	1982	=cut
1491		1983
1492	our $TLS_CTX;	1984	our $TLS_CTX;
1493		1985
1494	sub TLS_CTX() {	1986	sub TLS_CTX() {
1495	$TLS_CTX || do {	1987	$TLS_CTX ||= do {
1496	require Net::SSLeay;	1988	require AnyEvent::TLS;
1497		1989
1498	Net::SSLeay::load_error_strings ();	1990	new AnyEvent::TLS
1499	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1500	Net::SSLeay::randomize ();
1501
1502	$TLS_CTX = Net::SSLeay::CTX_new ();
1503
1504	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1505
1506	$TLS_CTX
1507	}	1991	}
1508	}	1992	}
1509		1993
1510	=back	1994	=back
1511		1995
1512		1996
1513	=head1 NONFREQUENTLY ASKED QUESTIONS	1997	=head1 NONFREQUENTLY ASKED QUESTIONS
1514		1998
1515	=over 4	1999	=over 4
		2000
		2001	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		2002	still get further invocations!
		2003
		2004	That's because AnyEvent::Handle keeps a reference to itself when handling
		2005	read or write callbacks.
		2006
		2007	It is only safe to "forget" the reference inside EOF or error callbacks,
		2008	from within all other callbacks, you need to explicitly call the C<<
		2009	->destroy >> method.
		2010
		2011	=item I get different callback invocations in TLS mode/Why can't I pause
		2012	reading?
		2013
		2014	Unlike, say, TCP, TLS connections do not consist of two independent
		2015	communication channels, one for each direction. Or put differently. The
		2016	read and write directions are not independent of each other: you cannot
		2017	write data unless you are also prepared to read, and vice versa.
		2018
		2019	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		2020	callback invocations when you are not expecting any read data - the reason
		2021	is that AnyEvent::Handle always reads in TLS mode.
		2022
		2023	During the connection, you have to make sure that you always have a
		2024	non-empty read-queue, or an C<on_read> watcher. At the end of the
		2025	connection (or when you no longer want to use it) you can call the
		2026	C<destroy> method.
1516		2027
1517	=item How do I read data until the other side closes the connection?	2028	=item How do I read data until the other side closes the connection?
1518		2029
1519	If you just want to read your data into a perl scalar, the easiest way	2030	If you just want to read your data into a perl scalar, the easiest way
1520	to achieve this is by setting an C<on_read> callback that does nothing,	2031	to achieve this is by setting an C<on_read> callback that does nothing,
…		…
1523		2034
1524	$handle->on_read (sub { });	2035	$handle->on_read (sub { });
1525	$handle->on_eof (undef);	2036	$handle->on_eof (undef);
1526	$handle->on_error (sub {	2037	$handle->on_error (sub {
1527	my $data = delete $_[0]{rbuf};	2038	my $data = delete $_[0]{rbuf};
1528	undef $handle;
1529	});	2039	});
1530		2040
1531	The reason to use C<on_error> is that TCP connections, due to latencies	2041	The reason to use C<on_error> is that TCP connections, due to latencies
1532	and packets loss, might get closed quite violently with an error, when in	2042	and packets loss, might get closed quite violently with an error, when in
1533	fact, all data has been received.	2043	fact, all data has been received.
1534		2044
1535	It is usually better to use acknowledgements when transfering data,	2045	It is usually better to use acknowledgements when transferring data,
1536	to make sure the other side hasn't just died and you got the data	2046	to make sure the other side hasn't just died and you got the data
1537	intact. This is also one reason why so many internet protocols have an	2047	intact. This is also one reason why so many internet protocols have an
1538	explicit QUIT command.	2048	explicit QUIT command.
1539
1540		2049
1541	=item I don't want to destroy the handle too early - how do I wait until	2050	=item I don't want to destroy the handle too early - how do I wait until
1542	all data has been written?	2051	all data has been written?
1543		2052
1544	After writing your last bits of data, set the C<on_drain> callback	2053	After writing your last bits of data, set the C<on_drain> callback
…		…
1550	$handle->on_drain (sub {	2059	$handle->on_drain (sub {
1551	warn "all data submitted to the kernel\n";	2060	warn "all data submitted to the kernel\n";
1552	undef $handle;	2061	undef $handle;
1553	});	2062	});
1554		2063
		2064	If you just want to queue some data and then signal EOF to the other side,
		2065	consider using C<< ->push_shutdown >> instead.
		2066
		2067	=item I want to contact a TLS/SSL server, I don't care about security.
		2068
		2069	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2070	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		2071	parameter:
		2072
		2073	tcp_connect $host, $port, sub {
		2074	my ($fh) = @_;
		2075
		2076	my $handle = new AnyEvent::Handle
		2077	fh => $fh,
		2078	tls => "connect",
		2079	on_error => sub { ... };
		2080
		2081	$handle->push_write (...);
		2082	};
		2083
		2084	=item I want to contact a TLS/SSL server, I do care about security.
		2085
		2086	Then you should additionally enable certificate verification, including
		2087	peername verification, if the protocol you use supports it (see
		2088	L<AnyEvent::TLS>, C<verify_peername>).
		2089
		2090	E.g. for HTTPS:
		2091
		2092	tcp_connect $host, $port, sub {
		2093	my ($fh) = @_;
		2094
		2095	my $handle = new AnyEvent::Handle
		2096	fh => $fh,
		2097	peername => $host,
		2098	tls => "connect",
		2099	tls_ctx => { verify => 1, verify_peername => "https" },
		2100	...
		2101
		2102	Note that you must specify the hostname you connected to (or whatever
		2103	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2104	peername verification will be done.
		2105
		2106	The above will use the system-dependent default set of trusted CA
		2107	certificates. If you want to check against a specific CA, add the
		2108	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2109
		2110	tls_ctx => {
		2111	verify => 1,
		2112	verify_peername => "https",
		2113	ca_file => "my-ca-cert.pem",
		2114	},
		2115
		2116	=item I want to create a TLS/SSL server, how do I do that?
		2117
		2118	Well, you first need to get a server certificate and key. You have
		2119	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2120	self-signed certificate (cheap. check the search engine of your choice,
		2121	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2122	nice program for that purpose).
		2123
		2124	Then create a file with your private key (in PEM format, see
		2125	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2126	file should then look like this:
		2127
		2128	-----BEGIN RSA PRIVATE KEY-----
		2129	...header data
		2130	... lots of base64'y-stuff
		2131	-----END RSA PRIVATE KEY-----
		2132
		2133	-----BEGIN CERTIFICATE-----
		2134	... lots of base64'y-stuff
		2135	-----END CERTIFICATE-----
		2136
		2137	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2138	specify this file as C<cert_file>:
		2139
		2140	tcp_server undef, $port, sub {
		2141	my ($fh) = @_;
		2142
		2143	my $handle = new AnyEvent::Handle
		2144	fh => $fh,
		2145	tls => "accept",
		2146	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2147	...
		2148
		2149	When you have intermediate CA certificates that your clients might not
		2150	know about, just append them to the C<cert_file>.
		2151
1555	=back	2152	=back
1556		2153
1557		2154
1558	=head1 SUBCLASSING AnyEvent::Handle	2155	=head1 SUBCLASSING AnyEvent::Handle
1559		2156

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines