ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.142 by root, Mon Jul 6 20:24:47 2009 UTC vs.
Revision 1.233 by root, Thu Apr 5 06:14:10 2012 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.452;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
		15	my ($hdl, $fatal, $msg) = @_;
		16	AE::log error => $msg;
		17	$hdl->destroy;
32	$cv->send;	18	$cv->send;
33	},
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	say "got line <$line>";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	stream-based filehandles (sockets, pipes, and other stream things).
52	on sockets see L<AnyEvent::Util>.
53		37
54	The L<AnyEvent::Intro> tutorial contains some well-documented	38	The L<AnyEvent::Intro> tutorial contains some well-documented
55	AnyEvent::Handle examples.	39	AnyEvent::Handle examples.
56		40
57	In the following, when the documentation refers to of "bytes" then this	41	In the following, where the documentation refers to "bytes", it means
58	means characters. As sysread and syswrite are used for all I/O, their	42	characters. As sysread and syswrite are used for all I/O, their
59	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
60		47
61	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
62	argument.	49	argument.
63		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
		79
		80	sub MAX_READ_SIZE() { 131072 }
		81
64	=head1 METHODS	82	=head1 METHODS
65		83
66	=over 4	84	=over 4
67		85
68	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...	86	=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
69		87
70	The constructor supports these arguments (all as C<< key => value >> pairs).	88	The constructor supports these arguments (all as C<< key => value >> pairs).
71		89
72	=over 4	90	=over 4
73		91
74	=item fh => $filehandle [MANDATORY]	92	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
75		93
76	The filehandle this L<AnyEvent::Handle> object will operate on.	94	The filehandle this L<AnyEvent::Handle> object will operate on.
77
78	NOTE: The filehandle will be set to non-blocking mode (using	95	NOTE: The filehandle will be set to non-blocking mode (using
79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in	96	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
80	that mode.	97	that mode.
81		98
		99	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		100
		101	Try to connect to the specified host and service (port), using
		102	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		103	default C<peername>.
		104
		105	You have to specify either this parameter, or C<fh>, above.
		106
		107	It is possible to push requests on the read and write queues, and modify
		108	properties of the stream, even while AnyEvent::Handle is connecting.
		109
		110	When this parameter is specified, then the C<on_prepare>,
		111	C<on_connect_error> and C<on_connect> callbacks will be called under the
		112	appropriate circumstances:
		113
		114	=over 4
		115
		116	=item on_prepare => $cb->($handle)
		117
		118	This (rarely used) callback is called before a new connection is
		119	attempted, but after the file handle has been created (you can access that
		120	file handle via C<< $handle->{fh} >>). It could be used to prepare the
		121	file handle with parameters required for the actual connect (as opposed to
		122	settings that can be changed when the connection is already established).
		123
		124	The return value of this callback should be the connect timeout value in
		125	seconds (or C<0>, or C<undef>, or the empty list, to indicate that the
		126	default timeout is to be used).
		127
		128	=item on_connect => $cb->($handle, $host, $port, $retry->())
		129
		130	This callback is called when a connection has been successfully established.
		131
		132	The peer's numeric host and port (the socket peername) are passed as
		133	parameters, together with a retry callback. At the time it is called the
		134	read and write queues, EOF status, TLS status and similar properties of
		135	the handle will have been reset.
		136
		137	It is not allowed to use the read or write queues while the handle object
		138	is connecting.
		139
		140	If, for some reason, the handle is not acceptable, calling C<$retry> will
		141	continue with the next connection target (in case of multi-homed hosts or
		142	SRV records there can be multiple connection endpoints). The C<$retry>
		143	callback can be invoked after the connect callback returns, i.e. one can
		144	start a handshake and then decide to retry with the next host if the
		145	handshake fails.
		146
		147	In most cases, you should ignore the C<$retry> parameter.
		148
		149	=item on_connect_error => $cb->($handle, $message)
		150
		151	This callback is called when the connection could not be
		152	established. C<$!> will contain the relevant error code, and C<$message> a
		153	message describing it (usually the same as C<"$!">).
		154
		155	If this callback isn't specified, then C<on_error> will be called with a
		156	fatal error instead.
		157
		158	=back
		159
		160	=item on_error => $cb->($handle, $fatal, $message)
		161
		162	This is the error callback, which is called when, well, some error
		163	occured, such as not being able to resolve the hostname, failure to
		164	connect, or a read error.
		165
		166	Some errors are fatal (which is indicated by C<$fatal> being true). On
		167	fatal errors the handle object will be destroyed (by a call to C<< ->
		168	destroy >>) after invoking the error callback (which means you are free to
		169	examine the handle object). Examples of fatal errors are an EOF condition
		170	with active (but unsatisfiable) read watchers (C<EPIPE>) or I/O errors. In
		171	cases where the other side can close the connection at will, it is
		172	often easiest to not report C<EPIPE> errors in this callback.
		173
		174	AnyEvent::Handle tries to find an appropriate error code for you to check
		175	against, but in some cases (TLS errors), this does not work well.
		176
		177	If you report the error to the user, it is recommended to always output
		178	the C<$message> argument in human-readable error messages (you don't need
		179	to report C<"$!"> if you report C<$message>).
		180
		181	If you want to react programmatically to the error, then looking at C<$!>
		182	and comparing it against some of the documented C<Errno> values is usually
		183	better than looking at the C<$message>.
		184
		185	Non-fatal errors can be retried by returning, but it is recommended
		186	to simply ignore this parameter and instead abondon the handle object
		187	when this callback is invoked. Examples of non-fatal errors are timeouts
		188	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
		189
		190	On entry to the callback, the value of C<$!> contains the operating
		191	system error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		192	C<EPROTO>).
		193
		194	While not mandatory, it is I<highly> recommended to set this callback, as
		195	you will not be notified of errors otherwise. The default just calls
		196	C<croak>.
		197
		198	=item on_read => $cb->($handle)
		199
		200	This sets the default read callback, which is called when data arrives
		201	and no read request is in the queue (unlike read queue callbacks, this
		202	callback will only be called when at least one octet of data is in the
		203	read buffer).
		204
		205	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
		206	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		207	must not enlarge or modify the read buffer, you can only remove data at
		208	the beginning from it.
		209
		210	You can also call C<< ->push_read (...) >> or any other function that
		211	modifies the read queue. Or do both. Or ...
		212
		213	When an EOF condition is detected, AnyEvent::Handle will first try to
		214	feed all the remaining data to the queued callbacks and C<on_read> before
		215	calling the C<on_eof> callback. If no progress can be made, then a fatal
		216	error will be raised (with C<$!> set to C<EPIPE>).
		217
		218	Note that, unlike requests in the read queue, an C<on_read> callback
		219	doesn't mean you I<require> some data: if there is an EOF and there
		220	are outstanding read requests then an error will be flagged. With an
		221	C<on_read> callback, the C<on_eof> callback will be invoked.
		222
82	=item on_eof => $cb->($handle)	223	=item on_eof => $cb->($handle)
83		224
84	Set the callback to be called when an end-of-file condition is detected,	225	Set the callback to be called when an end-of-file condition is detected,
85	i.e. in the case of a socket, when the other side has closed the	226	i.e. in the case of a socket, when the other side has closed the
86	connection cleanly.	227	connection cleanly, and there are no outstanding read requests in the
		228	queue (if there are read requests, then an EOF counts as an unexpected
		229	connection close and will be flagged as an error).
87		230
88	For sockets, this just means that the other side has stopped sending data,	231	For sockets, this just means that the other side has stopped sending data,
89	you can still try to write data, and, in fact, one can return from the EOF	232	you can still try to write data, and, in fact, one can return from the EOF
90	callback and continue writing data, as only the read part has been shut	233	callback and continue writing data, as only the read part has been shut
91	down.	234	down.
92		235
93	While not mandatory, it is I<highly> recommended to set an EOF callback,
94	otherwise you might end up with a closed socket while you are still
95	waiting for data.
96
97	If an EOF condition has been detected but no C<on_eof> callback has been	236	If an EOF condition has been detected but no C<on_eof> callback has been
98	set, then a fatal error will be raised with C<$!> set to <0>.	237	set, then a fatal error will be raised with C<$!> set to <0>.
99		238
100	=item on_error => $cb->($handle, $fatal, $message)
101
102	This is the error callback, which is called when, well, some error
103	occured, such as not being able to resolve the hostname, failure to
104	connect or a read error.
105
106	Some errors are fatal (which is indicated by C<$fatal> being true). On
107	fatal errors the handle object will be shut down and will not be usable
108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal
109	errors are an EOF condition with active (but unsatisifable) read watchers
110	(C<EPIPE>) or I/O errors.
111
112	AnyEvent::Handle tries to find an appropriate error code for you to check
113	against, but in some cases (TLS errors), this does not work well. It is
114	recommended to always output the C<$message> argument in human-readable
115	error messages (it's usually the same as C<"$!">).
116
117	Non-fatal errors can be retried by simply returning, but it is recommended
118	to simply ignore this parameter and instead abondon the handle object
119	when this callback is invoked. Examples of non-fatal errors are timeouts
120	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
121
122	On callback entrance, the value of C<$!> contains the operating system
123	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
124	C<EPROTO>).
125
126	While not mandatory, it is I<highly> recommended to set this callback, as
127	you will not be notified of errors otherwise. The default simply calls
128	C<croak>.
129
130	=item on_read => $cb->($handle)
131
132	This sets the default read callback, which is called when data arrives
133	and no read request is in the queue (unlike read queue callbacks, this
134	callback will only be called when at least one octet of data is in the
135	read buffer).
136
137	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
138	method or access the C<< $handle->{rbuf} >> member directly. Note that you
139	must not enlarge or modify the read buffer, you can only remove data at
140	the beginning from it.
141
142	When an EOF condition is detected then AnyEvent::Handle will first try to
143	feed all the remaining data to the queued callbacks and C<on_read> before
144	calling the C<on_eof> callback. If no progress can be made, then a fatal
145	error will be raised (with C<$!> set to C<EPIPE>).
146
147	=item on_drain => $cb->($handle)	239	=item on_drain => $cb->($handle)
148		240
149	This sets the callback that is called when the write buffer becomes empty	241	This sets the callback that is called once when the write buffer becomes
150	(or when the callback is set and the buffer is empty already).	242	empty (and immediately when the handle object is created).
151		243
152	To append to the write buffer, use the C<< ->push_write >> method.	244	To append to the write buffer, use the C<< ->push_write >> method.
153		245
154	This callback is useful when you don't want to put all of your write data	246	This callback is useful when you don't want to put all of your write data
155	into the queue at once, for example, when you want to write the contents	247	into the queue at once, for example, when you want to write the contents
…		…
157	memory and push it into the queue, but instead only read more data from	249	memory and push it into the queue, but instead only read more data from
158	the file when the write queue becomes empty.	250	the file when the write queue becomes empty.
159		251
160	=item timeout => $fractional_seconds	252	=item timeout => $fractional_seconds
161		253
		254	=item rtimeout => $fractional_seconds
		255
		256	=item wtimeout => $fractional_seconds
		257
162	If non-zero, then this enables an "inactivity" timeout: whenever this many	258	If non-zero, then these enables an "inactivity" timeout: whenever this
163	seconds pass without a successful read or write on the underlying file	259	many seconds pass without a successful read or write on the underlying
164	handle, the C<on_timeout> callback will be invoked (and if that one is	260	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
165	missing, a non-fatal C<ETIMEDOUT> error will be raised).	261	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		262	error will be raised).
166		263
		264	There are three variants of the timeouts that work independently of each
		265	other, for both read and write (triggered when nothing was read I<OR>
		266	written), just read (triggered when nothing was read), and just write:
		267	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		268	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		269	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
		270
167	Note that timeout processing is also active when you currently do not have	271	Note that timeout processing is active even when you do not have any
168	any outstanding read or write requests: If you plan to keep the connection	272	outstanding read or write requests: If you plan to keep the connection
169	idle then you should disable the timout temporarily or ignore the timeout	273	idle then you should disable the timeout temporarily or ignore the
170	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply	274	timeout in the corresponding C<on_timeout> callback, in which case
171	restart the timeout.	275	AnyEvent::Handle will simply restart the timeout.
172		276
173	Zero (the default) disables this timeout.	277	Zero (the default) disables the corresponding timeout.
174		278
175	=item on_timeout => $cb->($handle)	279	=item on_timeout => $cb->($handle)
		280
		281	=item on_rtimeout => $cb->($handle)
		282
		283	=item on_wtimeout => $cb->($handle)
176		284
177	Called whenever the inactivity timeout passes. If you return from this	285	Called whenever the inactivity timeout passes. If you return from this
178	callback, then the timeout will be reset as if some activity had happened,	286	callback, then the timeout will be reset as if some activity had happened,
179	so this condition is not fatal in any way.	287	so this condition is not fatal in any way.
180		288
…		…
188	be configured to accept only so-and-so much data that it cannot act on	296	be configured to accept only so-and-so much data that it cannot act on
189	(for example, when expecting a line, an attacker could send an unlimited	297	(for example, when expecting a line, an attacker could send an unlimited
190	amount of data without a callback ever being called as long as the line	298	amount of data without a callback ever being called as long as the line
191	isn't finished).	299	isn't finished).
192		300
		301	=item wbuf_max => <bytes>
		302
		303	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
		304	when the write buffer ever (strictly) exceeds this size. This is useful to
		305	avoid some forms of denial-of-service attacks.
		306
		307	Although the units of this parameter is bytes, this is the I<raw> number
		308	of bytes not yet accepted by the kernel. This can make a difference when
		309	you e.g. use TLS, as TLS typically makes your write data larger (but it
		310	can also make it smaller due to compression).
		311
		312	As an example of when this limit is useful, take a chat server that sends
		313	chat messages to a client. If the client does not read those in a timely
		314	manner then the send buffer in the server would grow unbounded.
		315
193	=item autocork => <boolean>	316	=item autocork => <boolean>
194		317
195	When disabled (the default), then C<push_write> will try to immediately	318	When disabled (the default), C<push_write> will try to immediately
196	write the data to the handle, if possible. This avoids having to register	319	write the data to the handle if possible. This avoids having to register
197	a write watcher and wait for the next event loop iteration, but can	320	a write watcher and wait for the next event loop iteration, but can
198	be inefficient if you write multiple small chunks (on the wire, this	321	be inefficient if you write multiple small chunks (on the wire, this
199	disadvantage is usually avoided by your kernel's nagle algorithm, see	322	disadvantage is usually avoided by your kernel's nagle algorithm, see
200	C<no_delay>, but this option can save costly syscalls).	323	C<no_delay>, but this option can save costly syscalls).
201		324
202	When enabled, then writes will always be queued till the next event loop	325	When enabled, writes will always be queued till the next event loop
203	iteration. This is efficient when you do many small writes per iteration,	326	iteration. This is efficient when you do many small writes per iteration,
204	but less efficient when you do a single write only per iteration (or when	327	but less efficient when you do a single write only per iteration (or when
205	the write buffer often is full). It also increases write latency.	328	the write buffer often is full). It also increases write latency.
206		329
207	=item no_delay => <boolean>	330	=item no_delay => <boolean>
…		…
211	the Nagle algorithm, and usually it is beneficial.	334	the Nagle algorithm, and usually it is beneficial.
212		335
213	In some situations you want as low a delay as possible, which can be	336	In some situations you want as low a delay as possible, which can be
214	accomplishd by setting this option to a true value.	337	accomplishd by setting this option to a true value.
215		338
216	The default is your opertaing system's default behaviour (most likely	339	The default is your operating system's default behaviour (most likely
217	enabled), this option explicitly enables or disables it, if possible.	340	enabled). This option explicitly enables or disables it, if possible.
		341
		342	=item keepalive => <boolean>
		343
		344	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		345	normally, TCP connections have no time-out once established, so TCP
		346	connections, once established, can stay alive forever even when the other
		347	side has long gone. TCP keepalives are a cheap way to take down long-lived
		348	TCP connections when the other side becomes unreachable. While the default
		349	is OS-dependent, TCP keepalives usually kick in after around two hours,
		350	and, if the other side doesn't reply, take down the TCP connection some 10
		351	to 15 minutes later.
		352
		353	It is harmless to specify this option for file handles that do not support
		354	keepalives, and enabling it on connections that are potentially long-lived
		355	is usually a good idea.
		356
		357	=item oobinline => <boolean>
		358
		359	BSD majorly fucked up the implementation of TCP urgent data. The result
		360	is that almost no OS implements TCP according to the specs, and every OS
		361	implements it slightly differently.
		362
		363	If you want to handle TCP urgent data, then setting this flag (the default
		364	is enabled) gives you the most portable way of getting urgent data, by
		365	putting it into the stream.
		366
		367	Since BSD emulation of OOB data on top of TCP's urgent data can have
		368	security implications, AnyEvent::Handle sets this flag automatically
		369	unless explicitly specified. Note that setting this flag after
		370	establishing a connection I<may> be a bit too late (data loss could
		371	already have occured on BSD systems), but at least it will protect you
		372	from most attacks.
218		373
219	=item read_size => <bytes>	374	=item read_size => <bytes>
220		375
221	The default read block size (the amount of bytes this module will	376	The initial read block size, the number of bytes this module will try
222	try to read during each loop iteration, which affects memory	377	to read during each loop iteration. Each handle object will consume
223	requirements). Default: C<8192>.	378	at least this amount of memory for the read buffer as well, so when
		379	handling many connections watch out for memory requirements). See also
		380	C<max_read_size>. Default: C<2048>.
		381
		382	=item max_read_size => <bytes>
		383
		384	The maximum read buffer size used by the dynamic adjustment
		385	algorithm: Each time AnyEvent::Handle can read C<read_size> bytes in
		386	one go it will double C<read_size> up to the maximum given by this
		387	option. Default: C<131072> or C<read_size>, whichever is higher.
224		388
225	=item low_water_mark => <bytes>	389	=item low_water_mark => <bytes>
226		390
227	Sets the amount of bytes (default: C<0>) that make up an "empty" write	391	Sets the number of bytes (default: C<0>) that make up an "empty" write
228	buffer: If the write reaches this size or gets even samller it is	392	buffer: If the buffer reaches this size or gets even samller it is
229	considered empty.	393	considered empty.
230		394
231	Sometimes it can be beneficial (for performance reasons) to add data to	395	Sometimes it can be beneficial (for performance reasons) to add data to
232	the write buffer before it is fully drained, but this is a rare case, as	396	the write buffer before it is fully drained, but this is a rare case, as
233	the operating system kernel usually buffers data as well, so the default	397	the operating system kernel usually buffers data as well, so the default
234	is good in almost all cases.	398	is good in almost all cases.
235		399
236	=item linger => <seconds>	400	=item linger => <seconds>
237		401
238	If non-zero (default: C<3600>), then the destructor of the	402	If this is non-zero (default: C<3600>), the destructor of the
239	AnyEvent::Handle object will check whether there is still outstanding	403	AnyEvent::Handle object will check whether there is still outstanding
240	write data and will install a watcher that will write this data to the	404	write data and will install a watcher that will write this data to the
241	socket. No errors will be reported (this mostly matches how the operating	405	socket. No errors will be reported (this mostly matches how the operating
242	system treats outstanding data at socket close time).	406	system treats outstanding data at socket close time).
243		407
…		…
249		413
250	A string used to identify the remote site - usually the DNS hostname	414	A string used to identify the remote site - usually the DNS hostname
251	(I<not> IDN!) used to create the connection, rarely the IP address.	415	(I<not> IDN!) used to create the connection, rarely the IP address.
252		416
253	Apart from being useful in error messages, this string is also used in TLS	417	Apart from being useful in error messages, this string is also used in TLS
254	peername verification (see C<verify_peername> in L<AnyEvent::TLS>).	418	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		419	verification will be skipped when C<peername> is not specified or is
		420	C<undef>.
255		421
256	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	422	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
257		423
258	When this parameter is given, it enables TLS (SSL) mode, that means	424	When this parameter is given, it enables TLS (SSL) mode, that means
259	AnyEvent will start a TLS handshake as soon as the conenction has been	425	AnyEvent will start a TLS handshake as soon as the connection has been
260	established and will transparently encrypt/decrypt data afterwards.	426	established and will transparently encrypt/decrypt data afterwards.
261		427
262	All TLS protocol errors will be signalled as C<EPROTO>, with an	428	All TLS protocol errors will be signalled as C<EPROTO>, with an
263	appropriate error message.	429	appropriate error message.
264		430
…		…
284	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,	450	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
285	passing in the wrong integer will lead to certain crash. This most often	451	passing in the wrong integer will lead to certain crash. This most often
286	happens when one uses a stylish C<< tls => 1 >> and is surprised about the	452	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
287	segmentation fault.	453	segmentation fault.
288		454
289	See the C<< ->starttls >> method for when need to start TLS negotiation later.	455	Use the C<< ->starttls >> method if you need to start TLS negotiation later.
290		456
291	=item tls_ctx => $anyevent_tls	457	=item tls_ctx => $anyevent_tls
292		458
293	Use the given C<AnyEvent::TLS> object to create the new TLS connection	459	Use the given C<AnyEvent::TLS> object to create the new TLS connection
294	(unless a connection object was specified directly). If this parameter is	460	(unless a connection object was specified directly). If this
295	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	461	parameter is missing (or C<undef>), then AnyEvent::Handle will use
		462	C<AnyEvent::Handle::TLS_CTX>.
296		463
297	Instead of an object, you can also specify a hash reference with C<< key	464	Instead of an object, you can also specify a hash reference with C<< key
298	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a	465	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
299	new TLS context object.	466	new TLS context object.
300		467
301	=item on_starttls => $cb->($handle, $success)	468	=item on_starttls => $cb->($handle, $success[, $error_message])
302		469
303	This callback will be invoked when the TLS/SSL handshake has finished. If	470	This callback will be invoked when the TLS/SSL handshake has finished. If
304	C<$success> is true, then the TLS handshake succeeded, otherwise it failed	471	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
305	(C<on_stoptls> will not be called in this case).	472	(C<on_stoptls> will not be called in this case).
306		473
307	The session in C<< $handle->{tls} >> can still be examined in this	474	The session in C<< $handle->{tls} >> can still be examined in this
308	callback, even when the handshake was not successful.	475	callback, even when the handshake was not successful.
		476
		477	TLS handshake failures will not cause C<on_error> to be invoked when this
		478	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		479
		480	Without this callback, handshake failures lead to C<on_error> being
		481	called as usual.
		482
		483	Note that you cannot just call C<starttls> again in this callback. If you
		484	need to do that, start an zero-second timer instead whose callback can
		485	then call C<< ->starttls >> again.
309		486
310	=item on_stoptls => $cb->($handle)	487	=item on_stoptls => $cb->($handle)
311		488
312	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is	489	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
313	set, then it will be invoked after freeing the TLS session. If it is not,	490	set, then it will be invoked after freeing the TLS session. If it is not,
…		…
337		514
338	sub new {	515	sub new {
339	my $class = shift;	516	my $class = shift;
340	my $self = bless { @_ }, $class;	517	my $self = bless { @_ }, $class;
341		518
342	$self->{fh} or Carp::croak "mandatory argument fh is missing";	519	if ($self->{fh}) {
		520	$self->_start;
		521	return unless $self->{fh}; # could be gone by now
		522
		523	} elsif ($self->{connect}) {
		524	require AnyEvent::Socket;
		525
		526	$self->{peername} = $self->{connect}[0]
		527	unless exists $self->{peername};
		528
		529	$self->{_skip_drain_rbuf} = 1;
		530
		531	{
		532	Scalar::Util::weaken (my $self = $self);
		533
		534	$self->{_connect} =
		535	AnyEvent::Socket::tcp_connect (
		536	$self->{connect}[0],
		537	$self->{connect}[1],
		538	sub {
		539	my ($fh, $host, $port, $retry) = @_;
		540
		541	delete $self->{_connect}; # no longer needed
		542
		543	if ($fh) {
		544	$self->{fh} = $fh;
		545
		546	delete $self->{_skip_drain_rbuf};
		547	$self->_start;
		548
		549	$self->{on_connect}
		550	and $self->{on_connect}($self, $host, $port, sub {
		551	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		552	$self->{_skip_drain_rbuf} = 1;
		553	&$retry;
		554	});
		555
		556	} else {
		557	if ($self->{on_connect_error}) {
		558	$self->{on_connect_error}($self, "$!");
		559	$self->destroy if $self;
		560	} else {
		561	$self->_error ($!, 1);
		562	}
		563	}
		564	},
		565	sub {
		566	local $self->{fh} = $_[0];
		567
		568	$self->{on_prepare}
		569	? $self->{on_prepare}->($self)
		570	: ()
		571	}
		572	);
		573	}
		574
		575	} else {
		576	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		577	}
		578
		579	$self
		580	}
		581
		582	sub _start {
		583	my ($self) = @_;
		584
		585	# too many clueless people try to use udp and similar sockets
		586	# with AnyEvent::Handle, do them a favour.
		587	my $type = getsockopt $self->{fh}, Socket::SOL_SOCKET (), Socket::SO_TYPE ();
		588	Carp::croak "AnyEvent::Handle: only stream sockets supported, anything else will NOT work!"
		589	if Socket::SOCK_STREAM () != (unpack "I", $type) && defined $type;
343		590
344	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	591	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
345		592
		593	$self->{_activity} =
		594	$self->{_ractivity} =
346	$self->{_activity} = AnyEvent->now;	595	$self->{_wactivity} = AE::now;
347	$self->_timeout;
348		596
		597	$self->{read_size} ||= 2048;
		598	$self->{max_read_size} = $self->{read_size}
		599	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		600
		601	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		602	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		603	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		604
349	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};	605	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		606	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
350		607
		608	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		609
351	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})	610	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
352	if $self->{tls};	611	if $self->{tls};
353		612
354	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	613	$self->on_drain (delete $self->{on_drain} ) if $self->{on_drain};
355		614
356	$self->start_read	615	$self->start_read
357	if $self->{on_read};	616	if $self->{on_read} || @{ $self->{_queue} };
358		617
359	$self->{fh} && $self	618	$self->_drain_wbuf;
360	}
361
362	sub _shutdown {
363	my ($self) = @_;
364
365	delete @$self{qw(_tw _rw _ww fh wbuf on_read _queue)};
366	$self->{_eof} = 1; # tell starttls et. al to stop trying
367
368	&_freetls;
369	}	619	}
370		620
371	sub _error {	621	sub _error {
372	my ($self, $errno, $fatal, $message) = @_;	622	my ($self, $errno, $fatal, $message) = @_;
373		623
374	$self->_shutdown
375	if $fatal;
376
377	$! = $errno;	624	$! = $errno;
378	$message ||= "$!";	625	$message ||= "$!";
379		626
380	if ($self->{on_error}) {	627	if ($self->{on_error}) {
381	$self->{on_error}($self, $fatal, $message);	628	$self->{on_error}($self, $fatal, $message);
382	} elsif ($self->{fh}) {	629	$self->destroy if $fatal;
		630	} elsif ($self->{fh} || $self->{connect}) {
		631	$self->destroy;
383	Carp::croak "AnyEvent::Handle uncaught error: $message";	632	Carp::croak "AnyEvent::Handle uncaught error: $message";
384	}	633	}
385	}	634	}
386		635
387	=item $fh = $handle->fh	636	=item $fh = $handle->fh
…		…
412	$_[0]{on_eof} = $_[1];	661	$_[0]{on_eof} = $_[1];
413	}	662	}
414		663
415	=item $handle->on_timeout ($cb)	664	=item $handle->on_timeout ($cb)
416		665
417	Replace the current C<on_timeout> callback, or disables the callback (but	666	=item $handle->on_rtimeout ($cb)
418	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
419	argument and method.
420		667
421	=cut	668	=item $handle->on_wtimeout ($cb)
422		669
423	sub on_timeout {	670	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
424	$_[0]{on_timeout} = $_[1];	671	callback, or disables the callback (but not the timeout) if C<$cb> =
425	}	672	C<undef>. See the C<timeout> constructor argument and method.
		673
		674	=cut
		675
		676	# see below
426		677
427	=item $handle->autocork ($boolean)	678	=item $handle->autocork ($boolean)
428		679
429	Enables or disables the current autocork behaviour (see C<autocork>	680	Enables or disables the current autocork behaviour (see C<autocork>
430	constructor argument). Changes will only take effect on the next write.	681	constructor argument). Changes will only take effect on the next write.
…		…
443	=cut	694	=cut
444		695
445	sub no_delay {	696	sub no_delay {
446	$_[0]{no_delay} = $_[1];	697	$_[0]{no_delay} = $_[1];
447		698
		699	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		700	if $_[0]{fh};
		701	}
		702
		703	=item $handle->keepalive ($boolean)
		704
		705	Enables or disables the C<keepalive> setting (see constructor argument of
		706	the same name for details).
		707
		708	=cut
		709
		710	sub keepalive {
		711	$_[0]{keepalive} = $_[1];
		712
448	eval {	713	eval {
449	local $SIG{__DIE__};	714	local $SIG{__DIE__};
450	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	715	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		716	if $_[0]{fh};
		717	};
		718	}
		719
		720	=item $handle->oobinline ($boolean)
		721
		722	Enables or disables the C<oobinline> setting (see constructor argument of
		723	the same name for details).
		724
		725	=cut
		726
		727	sub oobinline {
		728	$_[0]{oobinline} = $_[1];
		729
		730	eval {
		731	local $SIG{__DIE__};
		732	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		733	if $_[0]{fh};
		734	};
		735	}
		736
		737	=item $handle->keepalive ($boolean)
		738
		739	Enables or disables the C<keepalive> setting (see constructor argument of
		740	the same name for details).
		741
		742	=cut
		743
		744	sub keepalive {
		745	$_[0]{keepalive} = $_[1];
		746
		747	eval {
		748	local $SIG{__DIE__};
		749	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		750	if $_[0]{fh};
451	};	751	};
452	}	752	}
453		753
454	=item $handle->on_starttls ($cb)	754	=item $handle->on_starttls ($cb)
455		755
…		…
465		765
466	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).	766	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
467		767
468	=cut	768	=cut
469		769
470	sub on_starttls {	770	sub on_stoptls {
471	$_[0]{on_stoptls} = $_[1];	771	$_[0]{on_stoptls} = $_[1];
472	}	772	}
473		773
		774	=item $handle->rbuf_max ($max_octets)
		775
		776	Configures the C<rbuf_max> setting (C<undef> disables it).
		777
		778	=item $handle->wbuf_max ($max_octets)
		779
		780	Configures the C<wbuf_max> setting (C<undef> disables it).
		781
		782	=cut
		783
		784	sub rbuf_max {
		785	$_[0]{rbuf_max} = $_[1];
		786	}
		787
		788	sub wbuf_max {
		789	$_[0]{wbuf_max} = $_[1];
		790	}
		791
474	#############################################################################	792	#############################################################################
475		793
476	=item $handle->timeout ($seconds)	794	=item $handle->timeout ($seconds)
477		795
		796	=item $handle->rtimeout ($seconds)
		797
		798	=item $handle->wtimeout ($seconds)
		799
478	Configures (or disables) the inactivity timeout.	800	Configures (or disables) the inactivity timeout.
479		801
480	=cut	802	The timeout will be checked instantly, so this method might destroy the
		803	handle before it returns.
481		804
482	sub timeout {	805	=item $handle->timeout_reset
		806
		807	=item $handle->rtimeout_reset
		808
		809	=item $handle->wtimeout_reset
		810
		811	Reset the activity timeout, as if data was received or sent.
		812
		813	These methods are cheap to call.
		814
		815	=cut
		816
		817	for my $dir ("", "r", "w") {
		818	my $timeout = "${dir}timeout";
		819	my $tw = "_${dir}tw";
		820	my $on_timeout = "on_${dir}timeout";
		821	my $activity = "_${dir}activity";
		822	my $cb;
		823
		824	*$on_timeout = sub {
		825	$_[0]{$on_timeout} = $_[1];
		826	};
		827
		828	*$timeout = sub {
483	my ($self, $timeout) = @_;	829	my ($self, $new_value) = @_;
484		830
		831	$new_value >= 0
		832	or Carp::croak "AnyEvent::Handle->$timeout called with negative timeout ($new_value), caught";
		833
485	$self->{timeout} = $timeout;	834	$self->{$timeout} = $new_value;
486	$self->_timeout;	835	delete $self->{$tw}; &$cb;
487	}	836	};
488		837
		838	*{"${dir}timeout_reset"} = sub {
		839	$_[0]{$activity} = AE::now;
		840	};
		841
		842	# main workhorse:
489	# reset the timeout watcher, as neccessary	843	# reset the timeout watcher, as neccessary
490	# also check for time-outs	844	# also check for time-outs
491	sub _timeout {	845	$cb = sub {
492	my ($self) = @_;	846	my ($self) = @_;
493		847
494	if ($self->{timeout}) {	848	if ($self->{$timeout} && $self->{fh}) {
495	my $NOW = AnyEvent->now;	849	my $NOW = AE::now;
496		850
497	# when would the timeout trigger?	851	# when would the timeout trigger?
498	my $after = $self->{_activity} + $self->{timeout} - $NOW;	852	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
499		853
500	# now or in the past already?	854	# now or in the past already?
501	if ($after <= 0) {	855	if ($after <= 0) {
502	$self->{_activity} = $NOW;	856	$self->{$activity} = $NOW;
503		857
504	if ($self->{on_timeout}) {	858	if ($self->{$on_timeout}) {
505	$self->{on_timeout}($self);	859	$self->{$on_timeout}($self);
506	} else {	860	} else {
507	$self->_error (&Errno::ETIMEDOUT);	861	$self->_error (Errno::ETIMEDOUT);
		862	}
		863
		864	# callback could have changed timeout value, optimise
		865	return unless $self->{$timeout};
		866
		867	# calculate new after
		868	$after = $self->{$timeout};
508	}	869	}
509		870
510	# callback could have changed timeout value, optimise	871	Scalar::Util::weaken $self;
511	return unless $self->{timeout};	872	return unless $self; # ->error could have destroyed $self
512		873
513	# calculate new after	874	$self->{$tw} ||= AE::timer $after, 0, sub {
514	$after = $self->{timeout};	875	delete $self->{$tw};
		876	$cb->($self);
		877	};
		878	} else {
		879	delete $self->{$tw};
515	}	880	}
516
517	Scalar::Util::weaken $self;
518	return unless $self; # ->error could have destroyed $self
519
520	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
521	delete $self->{_tw};
522	$self->_timeout;
523	});
524	} else {
525	delete $self->{_tw};
526	}	881	}
527	}	882	}
528		883
529	#############################################################################	884	#############################################################################
530		885
…		…
537		892
538	The write queue is very simple: you can add data to its end, and	893	The write queue is very simple: you can add data to its end, and
539	AnyEvent::Handle will automatically try to get rid of it for you.	894	AnyEvent::Handle will automatically try to get rid of it for you.
540		895
541	When data could be written and the write buffer is shorter then the low	896	When data could be written and the write buffer is shorter then the low
542	water mark, the C<on_drain> callback will be invoked.	897	water mark, the C<on_drain> callback will be invoked once.
543		898
544	=over 4	899	=over 4
545		900
546	=item $handle->on_drain ($cb)	901	=item $handle->on_drain ($cb)
547		902
548	Sets the C<on_drain> callback or clears it (see the description of	903	Sets the C<on_drain> callback or clears it (see the description of
549	C<on_drain> in the constructor).	904	C<on_drain> in the constructor).
550		905
		906	This method may invoke callbacks (and therefore the handle might be
		907	destroyed after it returns).
		908
551	=cut	909	=cut
552		910
553	sub on_drain {	911	sub on_drain {
554	my ($self, $cb) = @_;	912	my ($self, $cb) = @_;
555		913
…		…
559	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});	917	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
560	}	918	}
561		919
562	=item $handle->push_write ($data)	920	=item $handle->push_write ($data)
563		921
564	Queues the given scalar to be written. You can push as much data as you	922	Queues the given scalar to be written. You can push as much data as
565	want (only limited by the available memory), as C<AnyEvent::Handle>	923	you want (only limited by the available memory and C<wbuf_max>), as
566	buffers it independently of the kernel.	924	C<AnyEvent::Handle> buffers it independently of the kernel.
		925
		926	This method may invoke callbacks (and therefore the handle might be
		927	destroyed after it returns).
567		928
568	=cut	929	=cut
569		930
570	sub _drain_wbuf {	931	sub _drain_wbuf {
571	my ($self) = @_;	932	my ($self) = @_;
…		…
575	Scalar::Util::weaken $self;	936	Scalar::Util::weaken $self;
576		937
577	my $cb = sub {	938	my $cb = sub {
578	my $len = syswrite $self->{fh}, $self->{wbuf};	939	my $len = syswrite $self->{fh}, $self->{wbuf};
579		940
580	if ($len >= 0) {	941	if (defined $len) {
581	substr $self->{wbuf}, 0, $len, "";	942	substr $self->{wbuf}, 0, $len, "";
582		943
583	$self->{_activity} = AnyEvent->now;	944	$self->{_activity} = $self->{_wactivity} = AE::now;
584		945
585	$self->{on_drain}($self)	946	$self->{on_drain}($self)
586	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})	947	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
587	&& $self->{on_drain};	948	&& $self->{on_drain};
588		949
…		…
594		955
595	# try to write data immediately	956	# try to write data immediately
596	$cb->() unless $self->{autocork};	957	$cb->() unless $self->{autocork};
597		958
598	# if still data left in wbuf, we need to poll	959	# if still data left in wbuf, we need to poll
599	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	960	$self->{_ww} = AE::io $self->{fh}, 1, $cb
600	if length $self->{wbuf};	961	if length $self->{wbuf};
		962
		963	if (
		964	defined $self->{wbuf_max}
		965	&& $self->{wbuf_max} < length $self->{wbuf}
		966	) {
		967	$self->_error (Errno::ENOSPC, 1), return;
		968	}
601	};	969	};
602	}	970	}
603		971
604	our %WH;	972	our %WH;
605		973
		974	# deprecated
606	sub register_write_type($$) {	975	sub register_write_type($$) {
607	$WH{$_[0]} = $_[1];	976	$WH{$_[0]} = $_[1];
608	}	977	}
609		978
610	sub push_write {	979	sub push_write {
611	my $self = shift;	980	my $self = shift;
612		981
613	if (@_ > 1) {	982	if (@_ > 1) {
614	my $type = shift;	983	my $type = shift;
615		984
		985	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
616	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	986	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
617	->($self, @_);	987	->($self, @_);
618	}	988	}
619		989
		990	# we downgrade here to avoid hard-to-track-down bugs,
		991	# and diagnose the problem earlier and better.
		992
620	if ($self->{tls}) {	993	if ($self->{tls}) {
621	$self->{_tls_wbuf} .= $_[0];	994	utf8::downgrade $self->{_tls_wbuf} .= $_[0];
622		995	&_dotls ($self) if $self->{fh};
623	&_dotls ($self);
624	} else {	996	} else {
625	$self->{wbuf} .= $_[0];	997	utf8::downgrade $self->{wbuf} .= $_[0];
626	$self->_drain_wbuf;	998	$self->_drain_wbuf if $self->{fh};
627	}	999	}
628	}	1000	}
629		1001
630	=item $handle->push_write (type => @args)	1002	=item $handle->push_write (type => @args)
631		1003
632	Instead of formatting your data yourself, you can also let this module do	1004	Instead of formatting your data yourself, you can also let this module
633	the job by specifying a type and type-specific arguments.	1005	do the job by specifying a type and type-specific arguments. You
		1006	can also specify the (fully qualified) name of a package, in which
		1007	case AnyEvent tries to load the package and then expects to find the
		1008	C<anyevent_write_type> function inside (see "custom write types", below).
634		1009
635	Predefined types are (if you have ideas for additional types, feel free to	1010	Predefined types are (if you have ideas for additional types, feel free to
636	drop by and tell us):	1011	drop by and tell us):
637		1012
638	=over 4	1013	=over 4
…		…
695	Other languages could read single lines terminated by a newline and pass	1070	Other languages could read single lines terminated by a newline and pass
696	this line into their JSON decoder of choice.	1071	this line into their JSON decoder of choice.
697		1072
698	=cut	1073	=cut
699		1074
		1075	sub json_coder() {
		1076	eval { require JSON::XS; JSON::XS->new->utf8 }
		1077	|| do { require JSON; JSON->new->utf8 }
		1078	}
		1079
700	register_write_type json => sub {	1080	register_write_type json => sub {
701	my ($self, $ref) = @_;	1081	my ($self, $ref) = @_;
702		1082
703	require JSON;	1083	my $json = $self->{json} ||= json_coder;
704		1084
705	$self->{json} ? $self->{json}->encode ($ref)	1085	$json->encode ($ref)
706	: JSON::encode_json ($ref)
707	};	1086	};
708		1087
709	=item storable => $reference	1088	=item storable => $reference
710		1089
711	Freezes the given reference using L<Storable> and writes it to the	1090	Freezes the given reference using L<Storable> and writes it to the
…		…
714	=cut	1093	=cut
715		1094
716	register_write_type storable => sub {	1095	register_write_type storable => sub {
717	my ($self, $ref) = @_;	1096	my ($self, $ref) = @_;
718		1097
719	require Storable;	1098	require Storable unless $Storable::VERSION;
720		1099
721	pack "w/a*", Storable::nfreeze ($ref)	1100	pack "w/a*", Storable::nfreeze ($ref)
722	};	1101	};
723		1102
724	=back	1103	=back
…		…
729	before it was actually written. One way to do that is to replace your	1108	before it was actually written. One way to do that is to replace your
730	C<on_drain> handler by a callback that shuts down the socket (and set	1109	C<on_drain> handler by a callback that shuts down the socket (and set
731	C<low_water_mark> to C<0>). This method is a shorthand for just that, and	1110	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
732	replaces the C<on_drain> callback with:	1111	replaces the C<on_drain> callback with:
733		1112
734	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown	1113	sub { shutdown $_[0]{fh}, 1 }
735		1114
736	This simply shuts down the write side and signals an EOF condition to the	1115	This simply shuts down the write side and signals an EOF condition to the
737	the peer.	1116	the peer.
738		1117
739	You can rely on the normal read queue and C<on_eof> handling	1118	You can rely on the normal read queue and C<on_eof> handling
740	afterwards. This is the cleanest way to close a connection.	1119	afterwards. This is the cleanest way to close a connection.
741		1120
		1121	This method may invoke callbacks (and therefore the handle might be
		1122	destroyed after it returns).
		1123
742	=cut	1124	=cut
743		1125
744	sub push_shutdown {	1126	sub push_shutdown {
745	my ($self) = @_;	1127	my ($self) = @_;
746		1128
747	delete $self->{low_water_mark};	1129	delete $self->{low_water_mark};
748	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });	1130	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
749	}	1131	}
750		1132
751	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1133	=item custom write types - Package::anyevent_write_type $handle, @args
752		1134
753	This function (not method) lets you add your own types to C<push_write>.	1135	Instead of one of the predefined types, you can also specify the name of
		1136	a package. AnyEvent will try to load the package and then expects to find
		1137	a function named C<anyevent_write_type> inside. If it isn't found, it
		1138	progressively tries to load the parent package until it either finds the
		1139	function (good) or runs out of packages (bad).
		1140
754	Whenever the given C<type> is used, C<push_write> will invoke the code	1141	Whenever the given C<type> is used, C<push_write> will the function with
755	reference with the handle object and the remaining arguments.	1142	the handle object and the remaining arguments.
756		1143
757	The code reference is supposed to return a single octet string that will	1144	The function is supposed to return a single octet string that will be
758	be appended to the write buffer.	1145	appended to the write buffer, so you can mentally treat this function as a
		1146	"arguments to on-the-wire-format" converter.
759		1147
760	Note that this is a function, and all types registered this way will be	1148	Example: implement a custom write type C<join> that joins the remaining
761	global, so try to use unique names.	1149	arguments using the first one.
		1150
		1151	$handle->push_write (My::Type => " ", 1,2,3);
		1152
		1153	# uses the following package, which can be defined in the "My::Type" or in
		1154	# the "My" modules to be auto-loaded, or just about anywhere when the
		1155	# My::Type::anyevent_write_type is defined before invoking it.
		1156
		1157	package My::Type;
		1158
		1159	sub anyevent_write_type {
		1160	my ($handle, $delim, @args) = @_;
		1161
		1162	join $delim, @args
		1163	}
762		1164
763	=cut	1165	=cut
764		1166
765	#############################################################################	1167	#############################################################################
766		1168
…		…
775	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1177	ways, the "simple" way, using only C<on_read> and the "complex" way, using
776	a queue.	1178	a queue.
777		1179
778	In the simple case, you just install an C<on_read> callback and whenever	1180	In the simple case, you just install an C<on_read> callback and whenever
779	new data arrives, it will be called. You can then remove some data (if	1181	new data arrives, it will be called. You can then remove some data (if
780	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna	1182	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you can
781	leave the data there if you want to accumulate more (e.g. when only a	1183	leave the data there if you want to accumulate more (e.g. when only a
782	partial message has been received so far).	1184	partial message has been received so far), or change the read queue with
		1185	e.g. C<push_read>.
783		1186
784	In the more complex case, you want to queue multiple callbacks. In this	1187	In the more complex case, you want to queue multiple callbacks. In this
785	case, AnyEvent::Handle will call the first queued callback each time new	1188	case, AnyEvent::Handle will call the first queued callback each time new
786	data arrives (also the first time it is queued) and removes it when it has	1189	data arrives (also the first time it is queued) and remove it when it has
787	done its job (see C<push_read>, below).	1190	done its job (see C<push_read>, below).
788		1191
789	This way you can, for example, push three line-reads, followed by reading	1192	This way you can, for example, push three line-reads, followed by reading
790	a chunk of data, and AnyEvent::Handle will execute them in order.	1193	a chunk of data, and AnyEvent::Handle will execute them in order.
791		1194
…		…
848	=cut	1251	=cut
849		1252
850	sub _drain_rbuf {	1253	sub _drain_rbuf {
851	my ($self) = @_;	1254	my ($self) = @_;
852		1255
		1256	# avoid recursion
		1257	return if $self->{_skip_drain_rbuf};
853	local $self->{_in_drain} = 1;	1258	local $self->{_skip_drain_rbuf} = 1;
854
855	if (
856	defined $self->{rbuf_max}
857	&& $self->{rbuf_max} < length $self->{rbuf}
858	) {
859	$self->_error (&Errno::ENOSPC, 1), return;
860	}
861		1259
862	while () {	1260	while () {
863	# we need to use a separate tls read buffer, as we must not receive data while	1261	# we need to use a separate tls read buffer, as we must not receive data while
864	# we are draining the buffer, and this can only happen with TLS.	1262	# we are draining the buffer, and this can only happen with TLS.
865	$self->{rbuf} .= delete $self->{_tls_rbuf} if exists $self->{_tls_rbuf};	1263	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1264	if exists $self->{_tls_rbuf};
866		1265
867	my $len = length $self->{rbuf};	1266	my $len = length $self->{rbuf};
868		1267
869	if (my $cb = shift @{ $self->{_queue} }) {	1268	if (my $cb = shift @{ $self->{_queue} }) {
870	unless ($cb->($self)) {	1269	unless ($cb->($self)) {
871	if ($self->{_eof}) {	1270	# no progress can be made
872	# no progress can be made (not enough data and no data forthcoming)	1271	# (not enough data and no data forthcoming)
873	$self->_error (&Errno::EPIPE, 1), return;	1272	$self->_error (Errno::EPIPE, 1), return
874	}	1273	if $self->{_eof};
875		1274
876	unshift @{ $self->{_queue} }, $cb;	1275	unshift @{ $self->{_queue} }, $cb;
877	last;	1276	last;
878	}	1277	}
879	} elsif ($self->{on_read}) {	1278	} elsif ($self->{on_read}) {
…		…
886	&& !@{ $self->{_queue} } # and the queue is still empty	1285	&& !@{ $self->{_queue} } # and the queue is still empty
887	&& $self->{on_read} # but we still have on_read	1286	&& $self->{on_read} # but we still have on_read
888	) {	1287	) {
889	# no further data will arrive	1288	# no further data will arrive
890	# so no progress can be made	1289	# so no progress can be made
891	$self->_error (&Errno::EPIPE, 1), return	1290	$self->_error (Errno::EPIPE, 1), return
892	if $self->{_eof};	1291	if $self->{_eof};
893		1292
894	last; # more data might arrive	1293	last; # more data might arrive
895	}	1294	}
896	} else {	1295	} else {
…		…
899	last;	1298	last;
900	}	1299	}
901	}	1300	}
902		1301
903	if ($self->{_eof}) {	1302	if ($self->{_eof}) {
904	if ($self->{on_eof}) {	1303	$self->{on_eof}
905	$self->{on_eof}($self)	1304	? $self->{on_eof}($self)
906	} else {
907	$self->_error (0, 1, "Unexpected end-of-file");	1305	: $self->_error (0, 1, "Unexpected end-of-file");
908	}	1306
		1307	return;
		1308	}
		1309
		1310	if (
		1311	defined $self->{rbuf_max}
		1312	&& $self->{rbuf_max} < length $self->{rbuf}
		1313	) {
		1314	$self->_error (Errno::ENOSPC, 1), return;
909	}	1315	}
910		1316
911	# may need to restart read watcher	1317	# may need to restart read watcher
912	unless ($self->{_rw}) {	1318	unless ($self->{_rw}) {
913	$self->start_read	1319	$self->start_read
…		…
919		1325
920	This replaces the currently set C<on_read> callback, or clears it (when	1326	This replaces the currently set C<on_read> callback, or clears it (when
921	the new callback is C<undef>). See the description of C<on_read> in the	1327	the new callback is C<undef>). See the description of C<on_read> in the
922	constructor.	1328	constructor.
923		1329
		1330	This method may invoke callbacks (and therefore the handle might be
		1331	destroyed after it returns).
		1332
924	=cut	1333	=cut
925		1334
926	sub on_read {	1335	sub on_read {
927	my ($self, $cb) = @_;	1336	my ($self, $cb) = @_;
928		1337
929	$self->{on_read} = $cb;	1338	$self->{on_read} = $cb;
930	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1339	$self->_drain_rbuf if $cb;
931	}	1340	}
932		1341
933	=item $handle->rbuf	1342	=item $handle->rbuf
934		1343
935	Returns the read buffer (as a modifiable lvalue).	1344	Returns the read buffer (as a modifiable lvalue). You can also access the
		1345	read buffer directly as the C<< ->{rbuf} >> member, if you want (this is
		1346	much faster, and no less clean).
936		1347
937	You can access the read buffer directly as the C<< ->{rbuf} >>	1348	The only operation allowed on the read buffer (apart from looking at it)
938	member, if you want. However, the only operation allowed on the	1349	is removing data from its beginning. Otherwise modifying or appending to
939	read buffer (apart from looking at it) is removing data from its	1350	it is not allowed and will lead to hard-to-track-down bugs.
940	beginning. Otherwise modifying or appending to it is not allowed and will
941	lead to hard-to-track-down bugs.
942		1351
943	NOTE: The read buffer should only be used or modified if the C<on_read>,	1352	NOTE: The read buffer should only be used or modified in the C<on_read>
944	C<push_read> or C<unshift_read> methods are used. The other read methods	1353	callback or when C<push_read> or C<unshift_read> are used with a single
945	automatically manage the read buffer.	1354	callback (i.e. untyped). Typed C<push_read> and C<unshift_read> methods
		1355	will manage the read buffer on their own.
946		1356
947	=cut	1357	=cut
948		1358
949	sub rbuf : lvalue {	1359	sub rbuf : lvalue {
950	$_[0]{rbuf}	1360	$_[0]{rbuf}
…		…
967		1377
968	If enough data was available, then the callback must remove all data it is	1378	If enough data was available, then the callback must remove all data it is
969	interested in (which can be none at all) and return a true value. After returning	1379	interested in (which can be none at all) and return a true value. After returning
970	true, it will be removed from the queue.	1380	true, it will be removed from the queue.
971		1381
		1382	These methods may invoke callbacks (and therefore the handle might be
		1383	destroyed after it returns).
		1384
972	=cut	1385	=cut
973		1386
974	our %RH;	1387	our %RH;
975		1388
976	sub register_read_type($$) {	1389	sub register_read_type($$) {
…		…
982	my $cb = pop;	1395	my $cb = pop;
983		1396
984	if (@_) {	1397	if (@_) {
985	my $type = shift;	1398	my $type = shift;
986		1399
		1400	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
987	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1401	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
988	->($self, $cb, @_);	1402	->($self, $cb, @_);
989	}	1403	}
990		1404
991	push @{ $self->{_queue} }, $cb;	1405	push @{ $self->{_queue} }, $cb;
992	$self->_drain_rbuf unless $self->{_in_drain};	1406	$self->_drain_rbuf;
993	}	1407	}
994		1408
995	sub unshift_read {	1409	sub unshift_read {
996	my $self = shift;	1410	my $self = shift;
997	my $cb = pop;	1411	my $cb = pop;
998		1412
999	if (@_) {	1413	if (@_) {
1000	my $type = shift;	1414	my $type = shift;
1001		1415
		1416	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
1002	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1417	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::unshift_read")
1003	->($self, $cb, @_);	1418	->($self, $cb, @_);
1004	}	1419	}
1005		1420
1006
1007	unshift @{ $self->{_queue} }, $cb;	1421	unshift @{ $self->{_queue} }, $cb;
1008	$self->_drain_rbuf unless $self->{_in_drain};	1422	$self->_drain_rbuf;
1009	}	1423	}
1010		1424
1011	=item $handle->push_read (type => @args, $cb)	1425	=item $handle->push_read (type => @args, $cb)
1012		1426
1013	=item $handle->unshift_read (type => @args, $cb)	1427	=item $handle->unshift_read (type => @args, $cb)
1014		1428
1015	Instead of providing a callback that parses the data itself you can chose	1429	Instead of providing a callback that parses the data itself you can chose
1016	between a number of predefined parsing formats, for chunks of data, lines	1430	between a number of predefined parsing formats, for chunks of data, lines
1017	etc.	1431	etc. You can also specify the (fully qualified) name of a package, in
		1432	which case AnyEvent tries to load the package and then expects to find the
		1433	C<anyevent_read_type> function inside (see "custom read types", below).
1018		1434
1019	Predefined types are (if you have ideas for additional types, feel free to	1435	Predefined types are (if you have ideas for additional types, feel free to
1020	drop by and tell us):	1436	drop by and tell us):
1021		1437
1022	=over 4	1438	=over 4
…		…
1028	data.	1444	data.
1029		1445
1030	Example: read 2 bytes.	1446	Example: read 2 bytes.
1031		1447
1032	$handle->push_read (chunk => 2, sub {	1448	$handle->push_read (chunk => 2, sub {
1033	warn "yay ", unpack "H*", $_[1];	1449	say "yay " . unpack "H*", $_[1];
1034	});	1450	});
1035		1451
1036	=cut	1452	=cut
1037		1453
1038	register_read_type chunk => sub {	1454	register_read_type chunk => sub {
…		…
1072	if (@_ < 3) {	1488	if (@_ < 3) {
1073	# this is more than twice as fast as the generic code below	1489	# this is more than twice as fast as the generic code below
1074	sub {	1490	sub {
1075	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;	1491	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
1076		1492
1077	$cb->($_[0], $1, $2);	1493	$cb->($_[0], "$1", "$2");
1078	1	1494	1
1079	}	1495	}
1080	} else {	1496	} else {
1081	$eol = quotemeta $eol unless ref $eol;	1497	$eol = quotemeta $eol unless ref $eol;
1082	$eol = qr|^(.*?)($eol)|s;	1498	$eol = qr|^(.*?)($eol)|s;
1083		1499
1084	sub {	1500	sub {
1085	$_[0]{rbuf} =~ s/$eol// or return;	1501	$_[0]{rbuf} =~ s/$eol// or return;
1086		1502
1087	$cb->($_[0], $1, $2);	1503	$cb->($_[0], "$1", "$2");
1088	1	1504	1
1089	}	1505	}
1090	}	1506	}
1091	};	1507	};
1092		1508
…		…
1114	the receive buffer when neither C<$accept> nor C<$reject> match,	1530	the receive buffer when neither C<$accept> nor C<$reject> match,
1115	and everything preceding and including the match will be accepted	1531	and everything preceding and including the match will be accepted
1116	unconditionally. This is useful to skip large amounts of data that you	1532	unconditionally. This is useful to skip large amounts of data that you
1117	know cannot be matched, so that the C<$accept> or C<$reject> regex do not	1533	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
1118	have to start matching from the beginning. This is purely an optimisation	1534	have to start matching from the beginning. This is purely an optimisation
1119	and is usually worth only when you expect more than a few kilobytes.	1535	and is usually worth it only when you expect more than a few kilobytes.
1120		1536
1121	Example: expect a http header, which ends at C<\015\012\015\012>. Since we	1537	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
1122	expect the header to be very large (it isn't in practise, but...), we use	1538	expect the header to be very large (it isn't in practice, but...), we use
1123	a skip regex to skip initial portions. The skip regex is tricky in that	1539	a skip regex to skip initial portions. The skip regex is tricky in that
1124	it only accepts something not ending in either \015 or \012, as these are	1540	it only accepts something not ending in either \015 or \012, as these are
1125	required for the accept regex.	1541	required for the accept regex.
1126		1542
1127	$handle->push_read (regex =>	1543	$handle->push_read (regex =>
…		…
1140		1556
1141	sub {	1557	sub {
1142	# accept	1558	# accept
1143	if ($$rbuf =~ $accept) {	1559	if ($$rbuf =~ $accept) {
1144	$data .= substr $$rbuf, 0, $+[0], "";	1560	$data .= substr $$rbuf, 0, $+[0], "";
1145	$cb->($self, $data);	1561	$cb->($_[0], $data);
1146	return 1;	1562	return 1;
1147	}	1563	}
1148		1564
1149	# reject	1565	# reject
1150	if ($reject && $$rbuf =~ $reject) {	1566	if ($reject && $$rbuf =~ $reject) {
1151	$self->_error (&Errno::EBADMSG);	1567	$_[0]->_error (Errno::EBADMSG);
1152	}	1568	}
1153		1569
1154	# skip	1570	# skip
1155	if ($skip && $$rbuf =~ $skip) {	1571	if ($skip && $$rbuf =~ $skip) {
1156	$data .= substr $$rbuf, 0, $+[0], "";	1572	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1172	my ($self, $cb) = @_;	1588	my ($self, $cb) = @_;
1173		1589
1174	sub {	1590	sub {
1175	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1591	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1176	if ($_[0]{rbuf} =~ /[^0-9]/) {	1592	if ($_[0]{rbuf} =~ /[^0-9]/) {
1177	$self->_error (&Errno::EBADMSG);	1593	$_[0]->_error (Errno::EBADMSG);
1178	}	1594	}
1179	return;	1595	return;
1180	}	1596	}
1181		1597
1182	my $len = $1;	1598	my $len = $1;
1183		1599
1184	$self->unshift_read (chunk => $len, sub {	1600	$_[0]->unshift_read (chunk => $len, sub {
1185	my $string = $_[1];	1601	my $string = $_[1];
1186	$_[0]->unshift_read (chunk => 1, sub {	1602	$_[0]->unshift_read (chunk => 1, sub {
1187	if ($_[1] eq ",") {	1603	if ($_[1] eq ",") {
1188	$cb->($_[0], $string);	1604	$cb->($_[0], $string);
1189	} else {	1605	} else {
1190	$self->_error (&Errno::EBADMSG);	1606	$_[0]->_error (Errno::EBADMSG);
1191	}	1607	}
1192	});	1608	});
1193	});	1609	});
1194		1610
1195	1	1611	1
…		…
1262	=cut	1678	=cut
1263		1679
1264	register_read_type json => sub {	1680	register_read_type json => sub {
1265	my ($self, $cb) = @_;	1681	my ($self, $cb) = @_;
1266		1682
1267	my $json = $self->{json} ||=	1683	my $json = $self->{json} ||= json_coder;
1268	eval { require JSON::XS; JSON::XS->new->utf8 }
1269	|| do { require JSON; JSON->new->utf8 };
1270		1684
1271	my $data;	1685	my $data;
1272	my $rbuf = \$self->{rbuf};	1686	my $rbuf = \$self->{rbuf};
1273		1687
1274	sub {	1688	sub {
1275	my $ref = eval { $json->incr_parse ($self->{rbuf}) };	1689	my $ref = eval { $json->incr_parse ($_[0]{rbuf}) };
1276		1690
1277	if ($ref) {	1691	if ($ref) {
1278	$self->{rbuf} = $json->incr_text;	1692	$_[0]{rbuf} = $json->incr_text;
1279	$json->incr_text = "";	1693	$json->incr_text = "";
1280	$cb->($self, $ref);	1694	$cb->($_[0], $ref);
1281		1695
1282	1	1696	1
1283	} elsif ($@) {	1697	} elsif ($@) {
1284	# error case	1698	# error case
1285	$json->incr_skip;	1699	$json->incr_skip;
1286		1700
1287	$self->{rbuf} = $json->incr_text;	1701	$_[0]{rbuf} = $json->incr_text;
1288	$json->incr_text = "";	1702	$json->incr_text = "";
1289		1703
1290	$self->_error (&Errno::EBADMSG);	1704	$_[0]->_error (Errno::EBADMSG);
1291		1705
1292	()	1706	()
1293	} else {	1707	} else {
1294	$self->{rbuf} = "";	1708	$_[0]{rbuf} = "";
1295		1709
1296	()	1710	()
1297	}	1711	}
1298	}	1712	}
1299	};	1713	};
…		…
1309	=cut	1723	=cut
1310		1724
1311	register_read_type storable => sub {	1725	register_read_type storable => sub {
1312	my ($self, $cb) = @_;	1726	my ($self, $cb) = @_;
1313		1727
1314	require Storable;	1728	require Storable unless $Storable::VERSION;
1315		1729
1316	sub {	1730	sub {
1317	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1731	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1318	defined (my $len = eval { unpack "w", $_[0]{rbuf} })	1732	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
1319	or return;	1733	or return;
…		…
1322		1736
1323	# bypass unshift if we already have the remaining chunk	1737	# bypass unshift if we already have the remaining chunk
1324	if ($format + $len <= length $_[0]{rbuf}) {	1738	if ($format + $len <= length $_[0]{rbuf}) {
1325	my $data = substr $_[0]{rbuf}, $format, $len;	1739	my $data = substr $_[0]{rbuf}, $format, $len;
1326	substr $_[0]{rbuf}, 0, $format + $len, "";	1740	substr $_[0]{rbuf}, 0, $format + $len, "";
		1741
1327	$cb->($_[0], Storable::thaw ($data));	1742	eval { $cb->($_[0], Storable::thaw ($data)); 1 }
		1743	or return $_[0]->_error (Errno::EBADMSG);
1328	} else {	1744	} else {
1329	# remove prefix	1745	# remove prefix
1330	substr $_[0]{rbuf}, 0, $format, "";	1746	substr $_[0]{rbuf}, 0, $format, "";
1331		1747
1332	# read remaining chunk	1748	# read remaining chunk
1333	$_[0]->unshift_read (chunk => $len, sub {	1749	$_[0]->unshift_read (chunk => $len, sub {
1334	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1750	eval { $cb->($_[0], Storable::thaw ($_[1])); 1 }
1335	$cb->($_[0], $ref);
1336	} else {
1337	$self->_error (&Errno::EBADMSG);	1751	or $_[0]->_error (Errno::EBADMSG);
1338	}
1339	});	1752	});
1340	}	1753	}
1341		1754
1342	1	1755	1
1343	}	1756	}
1344	};	1757	};
1345		1758
1346	=back	1759	=back
1347		1760
1348	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1761	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1349		1762
1350	This function (not method) lets you add your own types to C<push_read>.	1763	Instead of one of the predefined types, you can also specify the name
		1764	of a package. AnyEvent will try to load the package and then expects to
		1765	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1766	progressively tries to load the parent package until it either finds the
		1767	function (good) or runs out of packages (bad).
1351		1768
1352	Whenever the given C<type> is used, C<push_read> will invoke the code	1769	Whenever this type is used, C<push_read> will invoke the function with the
1353	reference with the handle object, the callback and the remaining	1770	handle object, the original callback and the remaining arguments.
1354	arguments.
1355		1771
1356	The code reference is supposed to return a callback (usually a closure)	1772	The function is supposed to return a callback (usually a closure) that
1357	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1773	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1774	mentally treat the function as a "configurable read type to read callback"
		1775	converter.
1358		1776
1359	It should invoke the passed callback when it is done reading (remember to	1777	It should invoke the original callback when it is done reading (remember
1360	pass C<$handle> as first argument as all other callbacks do that).	1778	to pass C<$handle> as first argument as all other callbacks do that,
		1779	although there is no strict requirement on this).
1361		1780
1362	Note that this is a function, and all types registered this way will be
1363	global, so try to use unique names.
1364
1365	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1781	For examples, see the source of this module (F<perldoc -m
1366	search for C<register_read_type>)).	1782	AnyEvent::Handle>, search for C<register_read_type>)).
1367		1783
1368	=item $handle->stop_read	1784	=item $handle->stop_read
1369		1785
1370	=item $handle->start_read	1786	=item $handle->start_read
1371		1787
…		…
1377	Note that AnyEvent::Handle will automatically C<start_read> for you when	1793	Note that AnyEvent::Handle will automatically C<start_read> for you when
1378	you change the C<on_read> callback or push/unshift a read callback, and it	1794	you change the C<on_read> callback or push/unshift a read callback, and it
1379	will automatically C<stop_read> for you when neither C<on_read> is set nor	1795	will automatically C<stop_read> for you when neither C<on_read> is set nor
1380	there are any read requests in the queue.	1796	there are any read requests in the queue.
1381		1797
1382	These methods will have no effect when in TLS mode (as TLS doesn't support	1798	In older versions of this module (<= 5.3), these methods had no effect,
1383	half-duplex connections).	1799	as TLS does not support half-duplex connections. In current versions they
		1800	work as expected, as this behaviour is required to avoid certain resource
		1801	attacks, where the program would be forced to read (and buffer) arbitrary
		1802	amounts of data before being able to send some data. The drawback is that
		1803	some readings of the the SSL/TLS specifications basically require this
		1804	attack to be working, as SSL/TLS implementations might stall sending data
		1805	during a rehandshake.
		1806
		1807	As a guideline, during the initial handshake, you should not stop reading,
		1808	and as a client, it might cause problems, depending on your application.
1384		1809
1385	=cut	1810	=cut
1386		1811
1387	sub stop_read {	1812	sub stop_read {
1388	my ($self) = @_;	1813	my ($self) = @_;
1389		1814
1390	delete $self->{_rw} unless $self->{tls};	1815	delete $self->{_rw};
1391	}	1816	}
1392		1817
1393	sub start_read {	1818	sub start_read {
1394	my ($self) = @_;	1819	my ($self) = @_;
1395		1820
1396	unless ($self->{_rw} || $self->{_eof}) {	1821	unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
1397	Scalar::Util::weaken $self;	1822	Scalar::Util::weaken $self;
1398		1823
1399	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1824	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1400	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});	1825	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1401	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1826	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size}, length $$rbuf;
1402		1827
1403	if ($len > 0) {	1828	if ($len > 0) {
1404	$self->{_activity} = AnyEvent->now;	1829	$self->{_activity} = $self->{_ractivity} = AE::now;
1405		1830
1406	if ($self->{tls}) {	1831	if ($self->{tls}) {
1407	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);	1832	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1408		1833
1409	&_dotls ($self);	1834	&_dotls ($self);
1410	} else {	1835	} else {
1411	$self->_drain_rbuf unless $self->{_in_drain};	1836	$self->_drain_rbuf;
		1837	}
		1838
		1839	if ($len == $self->{read_size}) {
		1840	$self->{read_size} *= 2;
		1841	$self->{read_size} = $self->{max_read_size} || MAX_READ_SIZE
		1842	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
1412	}	1843	}
1413		1844
1414	} elsif (defined $len) {	1845	} elsif (defined $len) {
1415	delete $self->{_rw};	1846	delete $self->{_rw};
1416	$self->{_eof} = 1;	1847	$self->{_eof} = 1;
1417	$self->_drain_rbuf unless $self->{_in_drain};	1848	$self->_drain_rbuf;
1418		1849
1419	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1850	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1420	return $self->_error ($!, 1);	1851	return $self->_error ($!, 1);
1421	}	1852	}
1422	});	1853	};
1423	}	1854	}
1424	}	1855	}
1425		1856
1426	our $ERROR_SYSCALL;	1857	our $ERROR_SYSCALL;
1427	our $ERROR_WANT_READ;	1858	our $ERROR_WANT_READ;
…		…
1430	my ($self, $err) = @_;	1861	my ($self, $err) = @_;
1431		1862
1432	return $self->_error ($!, 1)	1863	return $self->_error ($!, 1)
1433	if $err == Net::SSLeay::ERROR_SYSCALL ();	1864	if $err == Net::SSLeay::ERROR_SYSCALL ();
1434		1865
1435	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());	1866	my $err = Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
1436		1867
1437	# reduce error string to look less scary	1868	# reduce error string to look less scary
1438	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;	1869	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
1439		1870
		1871	if ($self->{_on_starttls}) {
		1872	(delete $self->{_on_starttls})->($self, undef, $err);
		1873	&_freetls;
		1874	} else {
		1875	&_freetls;
1440	$self->_error (&Errno::EPROTO, 1, $err);	1876	$self->_error (Errno::EPROTO, 1, $err);
		1877	}
1441	}	1878	}
1442		1879
1443	# poll the write BIO and send the data if applicable	1880	# poll the write BIO and send the data if applicable
1444	# also decode read data if possible	1881	# also decode read data if possible
1445	# this is basiclaly our TLS state machine	1882	# this is basiclaly our TLS state machine
…		…
1461	&& ($tmp != $ERROR_SYSCALL || $!);	1898	&& ($tmp != $ERROR_SYSCALL || $!);
1462	}	1899	}
1463		1900
1464	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {	1901	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
1465	unless (length $tmp) {	1902	unless (length $tmp) {
		1903	$self->{_on_starttls}
		1904	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
1466	&_freetls;	1905	&_freetls;
		1906
1467	if ($self->{on_stoptls}) {	1907	if ($self->{on_stoptls}) {
1468	$self->{on_stoptls}($self);	1908	$self->{on_stoptls}($self);
1469	return;	1909	return;
1470	} else {	1910	} else {
1471	# let's treat SSL-eof as we treat normal EOF	1911	# let's treat SSL-eof as we treat normal EOF
…		…
1473	$self->{_eof} = 1;	1913	$self->{_eof} = 1;
1474	}	1914	}
1475	}	1915	}
1476		1916
1477	$self->{_tls_rbuf} .= $tmp;	1917	$self->{_tls_rbuf} .= $tmp;
1478	$self->_drain_rbuf unless $self->{_in_drain};	1918	$self->_drain_rbuf;
1479	$self->{tls} or return; # tls session might have gone away in callback	1919	$self->{tls} or return; # tls session might have gone away in callback
1480	}	1920	}
1481		1921
1482	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);	1922	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
1483	return $self->_tls_error ($tmp)	1923	return $self->_tls_error ($tmp)
…		…
1485	&& ($tmp != $ERROR_SYSCALL || $!);	1925	&& ($tmp != $ERROR_SYSCALL || $!);
1486		1926
1487	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1927	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1488	$self->{wbuf} .= $tmp;	1928	$self->{wbuf} .= $tmp;
1489	$self->_drain_wbuf;	1929	$self->_drain_wbuf;
		1930	$self->{tls} or return; # tls session might have gone away in callback
1490	}	1931	}
1491		1932
1492	$self->{_on_starttls}	1933	$self->{_on_starttls}
1493	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()	1934	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1494	and (delete $self->{_on_starttls})->($self, 1);	1935	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1495	}	1936	}
1496		1937
1497	=item $handle->starttls ($tls[, $tls_ctx])	1938	=item $handle->starttls ($tls[, $tls_ctx])
1498		1939
1499	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1940	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1500	object is created, you can also do that at a later time by calling	1941	object is created, you can also do that at a later time by calling
1501	C<starttls>.	1942	C<starttls>.
		1943
		1944	Starting TLS is currently an asynchronous operation - when you push some
		1945	write data and then call C<< ->starttls >> then TLS negotiation will start
		1946	immediately, after which the queued write data is then sent.
1502		1947
1503	The first argument is the same as the C<tls> constructor argument (either	1948	The first argument is the same as the C<tls> constructor argument (either
1504	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1949	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1505		1950
1506	The second argument is the optional C<AnyEvent::TLS> object that is used	1951	The second argument is the optional C<AnyEvent::TLS> object that is used
…		…
1511	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS	1956	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1512	context in C<< $handle->{tls_ctx} >> after this call and can be used or	1957	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1513	changed to your liking. Note that the handshake might have already started	1958	changed to your liking. Note that the handshake might have already started
1514	when this function returns.	1959	when this function returns.
1515		1960
1516	If it an error to start a TLS handshake more than once per	1961	Due to bugs in OpenSSL, it might or might not be possible to do multiple
1517	AnyEvent::Handle object (this is due to bugs in OpenSSL).	1962	handshakes on the same stream. It is best to not attempt to use the
		1963	stream after stopping TLS.
		1964
		1965	This method may invoke callbacks (and therefore the handle might be
		1966	destroyed after it returns).
1518		1967
1519	=cut	1968	=cut
1520		1969
1521	our %TLS_CACHE; #TODO not yet documented, should we?	1970	our %TLS_CACHE; #TODO not yet documented, should we?
1522		1971
1523	sub starttls {	1972	sub starttls {
1524	my ($self, $ssl, $ctx) = @_;	1973	my ($self, $tls, $ctx) = @_;
		1974
		1975	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1976	if $self->{tls};
		1977
		1978	$self->{tls} = $tls;
		1979	$self->{tls_ctx} = $ctx if @_ > 2;
		1980
		1981	return unless $self->{fh};
1525		1982
1526	require Net::SSLeay;	1983	require Net::SSLeay;
1527
1528	Carp::croak "it is an error to call starttls more than once on an AnyEvent::Handle object"
1529	if $self->{tls};
1530		1984
1531	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();	1985	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
1532	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();	1986	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
1533		1987
		1988	$tls = delete $self->{tls};
1534	$ctx ||= $self->{tls_ctx};	1989	$ctx = $self->{tls_ctx};
		1990
		1991	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
1535		1992
1536	if ("HASH" eq ref $ctx) {	1993	if ("HASH" eq ref $ctx) {
1537	require AnyEvent::TLS;	1994	require AnyEvent::TLS;
1538
1539	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context
1540		1995
1541	if ($ctx->{cache}) {	1996	if ($ctx->{cache}) {
1542	my $key = $ctx+0;	1997	my $key = $ctx+0;
1543	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;	1998	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
1544	} else {	1999	} else {
1545	$ctx = new AnyEvent::TLS %$ctx;	2000	$ctx = new AnyEvent::TLS %$ctx;
1546	}	2001	}
1547	}	2002	}
1548		2003
1549	$self->{tls_ctx} = $ctx || TLS_CTX ();	2004	$self->{tls_ctx} = $ctx || TLS_CTX ();
1550	$self->{tls} = $ssl = $self->{tls_ctx}->_get_session ($ssl, $self, $self->{peername});	2005	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1551		2006
1552	# basically, this is deep magic (because SSL_read should have the same issues)	2007	# basically, this is deep magic (because SSL_read should have the same issues)
1553	# but the openssl maintainers basically said: "trust us, it just works".	2008	# but the openssl maintainers basically said: "trust us, it just works".
1554	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	2009	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1555	# and mismaintained ssleay-module doesn't even offer them).	2010	# and mismaintained ssleay-module doesn't even offer them).
…		…
1562	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to	2017	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
1563	# have identity issues in that area.	2018	# have identity issues in that area.
1564	# Net::SSLeay::CTX_set_mode ($ssl,	2019	# Net::SSLeay::CTX_set_mode ($ssl,
1565	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	2020	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1566	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	2021	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
1567	Net::SSLeay::CTX_set_mode ($ssl, 1|2);	2022	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1568		2023
1569	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	2024	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1570	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	2025	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1571		2026
		2027	Net::SSLeay::BIO_write ($self->{_rbio}, $self->{rbuf});
		2028	$self->{rbuf} = "";
		2029
1572	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	2030	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1573		2031
1574	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }	2032	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1575	if exists $self->{on_starttls};	2033	if $self->{on_starttls};
1576		2034
1577	&_dotls; # need to trigger the initial handshake	2035	&_dotls; # need to trigger the initial handshake
1578	$self->start_read; # make sure we actually do read	2036	$self->start_read; # make sure we actually do read
1579	}	2037	}
1580		2038
1581	=item $handle->stoptls	2039	=item $handle->stoptls
1582		2040
1583	Shuts down the SSL connection - this makes a proper EOF handshake by	2041	Shuts down the SSL connection - this makes a proper EOF handshake by
1584	sending a close notify to the other side, but since OpenSSL doesn't	2042	sending a close notify to the other side, but since OpenSSL doesn't
1585	support non-blocking shut downs, it is not possible to re-use the stream	2043	support non-blocking shut downs, it is not guaranteed that you can re-use
1586	afterwards.	2044	the stream afterwards.
		2045
		2046	This method may invoke callbacks (and therefore the handle might be
		2047	destroyed after it returns).
1587		2048
1588	=cut	2049	=cut
1589		2050
1590	sub stoptls {	2051	sub stoptls {
1591	my ($self) = @_;	2052	my ($self) = @_;
1592		2053
1593	if ($self->{tls}) {	2054	if ($self->{tls} && $self->{fh}) {
1594	Net::SSLeay::shutdown ($self->{tls});	2055	Net::SSLeay::shutdown ($self->{tls});
1595		2056
1596	&_dotls;	2057	&_dotls;
1597		2058
1598	# # we don't give a shit. no, we do, but we can't. no...#d#	2059	# # we don't give a shit. no, we do, but we can't. no...#d#
…		…
1604	sub _freetls {	2065	sub _freetls {
1605	my ($self) = @_;	2066	my ($self) = @_;
1606		2067
1607	return unless $self->{tls};	2068	return unless $self->{tls};
1608		2069
1609	$self->{_on_starttls}
1610	and (delete $self->{_on_starttls})->($self, undef);
1611
1612	$self->{tls_ctx}->_put_session (delete $self->{tls});	2070	$self->{tls_ctx}->_put_session (delete $self->{tls})
		2071	if $self->{tls} > 0;
1613		2072
1614	delete @$self{qw(_rbio _wbio _tls_wbuf)};	2073	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1615	}	2074	}
		2075
		2076	=item $handle->resettls
		2077
		2078	This rarely-used method simply resets and TLS state on the handle, usually
		2079	causing data loss.
		2080
		2081	One case where it may be useful is when you want to skip over the data in
		2082	the stream but you are not interested in interpreting it, so data loss is
		2083	no concern.
		2084
		2085	=cut
		2086
		2087	*resettls = \&_freetls;
1616		2088
1617	sub DESTROY {	2089	sub DESTROY {
1618	my ($self) = @_;	2090	my ($self) = @_;
1619		2091
1620	&_freetls;	2092	&_freetls;
1621		2093
1622	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	2094	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1623		2095
1624	if ($linger && length $self->{wbuf}) {	2096	if ($linger && length $self->{wbuf} && $self->{fh}) {
1625	my $fh = delete $self->{fh};	2097	my $fh = delete $self->{fh};
1626	my $wbuf = delete $self->{wbuf};	2098	my $wbuf = delete $self->{wbuf};
1627		2099
1628	my @linger;	2100	my @linger;
1629		2101
1630	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	2102	push @linger, AE::io $fh, 1, sub {
1631	my $len = syswrite $fh, $wbuf, length $wbuf;	2103	my $len = syswrite $fh, $wbuf, length $wbuf;
1632		2104
1633	if ($len > 0) {	2105	if ($len > 0) {
1634	substr $wbuf, 0, $len, "";	2106	substr $wbuf, 0, $len, "";
1635	} else {	2107	} elsif (defined $len || ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK)) {
1636	@linger = (); # end	2108	@linger = (); # end
1637	}	2109	}
1638	});	2110	};
1639	push @linger, AnyEvent->timer (after => $linger, cb => sub {	2111	push @linger, AE::timer $linger, 0, sub {
1640	@linger = ();	2112	@linger = ();
1641	});	2113	};
1642	}	2114	}
1643	}	2115	}
1644		2116
1645	=item $handle->destroy	2117	=item $handle->destroy
1646		2118
1647	Shuts down the handle object as much as possible - this call ensures that	2119	Shuts down the handle object as much as possible - this call ensures that
1648	no further callbacks will be invoked and as many resources as possible	2120	no further callbacks will be invoked and as many resources as possible
1649	will be freed. You must not call any methods on the object afterwards.	2121	will be freed. Any method you will call on the handle object after
		2122	destroying it in this way will be silently ignored (and it will return the
		2123	empty list).
1650		2124
1651	Normally, you can just "forget" any references to an AnyEvent::Handle	2125	Normally, you can just "forget" any references to an AnyEvent::Handle
1652	object and it will simply shut down. This works in fatal error and EOF	2126	object and it will simply shut down. This works in fatal error and EOF
1653	callbacks, as well as code outside. It does I<NOT> work in a read or write	2127	callbacks, as well as code outside. It does I<NOT> work in a read or write
1654	callback, so when you want to destroy the AnyEvent::Handle object from	2128	callback, so when you want to destroy the AnyEvent::Handle object from
1655	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in	2129	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
1656	that case.	2130	that case.
1657		2131
		2132	Destroying the handle object in this way has the advantage that callbacks
		2133	will be removed as well, so if those are the only reference holders (as
		2134	is common), then one doesn't need to do anything special to break any
		2135	reference cycles.
		2136
1658	The handle might still linger in the background and write out remaining	2137	The handle might still linger in the background and write out remaining
1659	data, as specified by the C<linger> option, however.	2138	data, as specified by the C<linger> option, however.
1660		2139
1661	=cut	2140	=cut
1662		2141
1663	sub destroy {	2142	sub destroy {
1664	my ($self) = @_;	2143	my ($self) = @_;
1665		2144
1666	$self->DESTROY;	2145	$self->DESTROY;
1667	%$self = ();	2146	%$self = ();
		2147	bless $self, "AnyEvent::Handle::destroyed";
1668	}	2148	}
		2149
		2150	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2151	#nop
		2152	}
		2153
		2154	=item $handle->destroyed
		2155
		2156	Returns false as long as the handle hasn't been destroyed by a call to C<<
		2157	->destroy >>, true otherwise.
		2158
		2159	Can be useful to decide whether the handle is still valid after some
		2160	callback possibly destroyed the handle. For example, C<< ->push_write >>,
		2161	C<< ->starttls >> and other methods can call user callbacks, which in turn
		2162	can destroy the handle, so work can be avoided by checking sometimes:
		2163
		2164	$hdl->starttls ("accept");
		2165	return if $hdl->destroyed;
		2166	$hdl->push_write (...
		2167
		2168	Note that the call to C<push_write> will silently be ignored if the handle
		2169	has been destroyed, so often you can just ignore the possibility of the
		2170	handle being destroyed.
		2171
		2172	=cut
		2173
		2174	sub destroyed { 0 }
		2175	sub AnyEvent::Handle::destroyed::destroyed { 1 }
1669		2176
1670	=item AnyEvent::Handle::TLS_CTX	2177	=item AnyEvent::Handle::TLS_CTX
1671		2178
1672	This function creates and returns the AnyEvent::TLS object used by default	2179	This function creates and returns the AnyEvent::TLS object used by default
1673	for TLS mode.	2180	for TLS mode.
…		…
1701		2208
1702	It is only safe to "forget" the reference inside EOF or error callbacks,	2209	It is only safe to "forget" the reference inside EOF or error callbacks,
1703	from within all other callbacks, you need to explicitly call the C<<	2210	from within all other callbacks, you need to explicitly call the C<<
1704	->destroy >> method.	2211	->destroy >> method.
1705		2212
		2213	=item Why is my C<on_eof> callback never called?
		2214
		2215	Probably because your C<on_error> callback is being called instead: When
		2216	you have outstanding requests in your read queue, then an EOF is
		2217	considered an error as you clearly expected some data.
		2218
		2219	To avoid this, make sure you have an empty read queue whenever your handle
		2220	is supposed to be "idle" (i.e. connection closes are O.K.). You can set
		2221	an C<on_read> handler that simply pushes the first read requests in the
		2222	queue.
		2223
		2224	See also the next question, which explains this in a bit more detail.
		2225
		2226	=item How can I serve requests in a loop?
		2227
		2228	Most protocols consist of some setup phase (authentication for example)
		2229	followed by a request handling phase, where the server waits for requests
		2230	and handles them, in a loop.
		2231
		2232	There are two important variants: The first (traditional, better) variant
		2233	handles requests until the server gets some QUIT command, causing it to
		2234	close the connection first (highly desirable for a busy TCP server). A
		2235	client dropping the connection is an error, which means this variant can
		2236	detect an unexpected detection close.
		2237
		2238	To handle this case, always make sure you have a on-empty read queue, by
		2239	pushing the "read request start" handler on it:
		2240
		2241	# we assume a request starts with a single line
		2242	my @start_request; @start_request = (line => sub {
		2243	my ($hdl, $line) = @_;
		2244
		2245	... handle request
		2246
		2247	# push next request read, possibly from a nested callback
		2248	$hdl->push_read (@start_request);
		2249	});
		2250
		2251	# auth done, now go into request handling loop
		2252	# now push the first @start_request
		2253	$hdl->push_read (@start_request);
		2254
		2255	By always having an outstanding C<push_read>, the handle always expects
		2256	some data and raises the C<EPIPE> error when the connction is dropped
		2257	unexpectedly.
		2258
		2259	The second variant is a protocol where the client can drop the connection
		2260	at any time. For TCP, this means that the server machine may run out of
		2261	sockets easier, and in general, it means you cannot distinguish a protocl
		2262	failure/client crash from a normal connection close. Nevertheless, these
		2263	kinds of protocols are common (and sometimes even the best solution to the
		2264	problem).
		2265
		2266	Having an outstanding read request at all times is possible if you ignore
		2267	C<EPIPE> errors, but this doesn't help with when the client drops the
		2268	connection during a request, which would still be an error.
		2269
		2270	A better solution is to push the initial request read in an C<on_read>
		2271	callback. This avoids an error, as when the server doesn't expect data
		2272	(i.e. is idly waiting for the next request, an EOF will not raise an
		2273	error, but simply result in an C<on_eof> callback. It is also a bit slower
		2274	and simpler:
		2275
		2276	# auth done, now go into request handling loop
		2277	$hdl->on_read (sub {
		2278	my ($hdl) = @_;
		2279
		2280	# called each time we receive data but the read queue is empty
		2281	# simply start read the request
		2282
		2283	$hdl->push_read (line => sub {
		2284	my ($hdl, $line) = @_;
		2285
		2286	... handle request
		2287
		2288	# do nothing special when the request has been handled, just
		2289	# let the request queue go empty.
		2290	});
		2291	});
		2292
1706	=item I get different callback invocations in TLS mode/Why can't I pause	2293	=item I get different callback invocations in TLS mode/Why can't I pause
1707	reading?	2294	reading?
1708		2295
1709	Unlike, say, TCP, TLS connections do not consist of two independent	2296	Unlike, say, TCP, TLS connections do not consist of two independent
1710	communication channels, one for each direction. Or put differently. The	2297	communication channels, one for each direction. Or put differently, the
1711	read and write directions are not independent of each other: you cannot	2298	read and write directions are not independent of each other: you cannot
1712	write data unless you are also prepared to read, and vice versa.	2299	write data unless you are also prepared to read, and vice versa.
1713		2300
1714	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>	2301	This means that, in TLS mode, you might get C<on_error> or C<on_eof>
1715	callback invocations when you are not expecting any read data - the reason	2302	callback invocations when you are not expecting any read data - the reason
1716	is that AnyEvent::Handle always reads in TLS mode.	2303	is that AnyEvent::Handle always reads in TLS mode.
1717		2304
1718	During the connection, you have to make sure that you always have a	2305	During the connection, you have to make sure that you always have a
1719	non-empty read-queue, or an C<on_read> watcher. At the end of the	2306	non-empty read-queue, or an C<on_read> watcher. At the end of the
…		…
1729		2316
1730	$handle->on_read (sub { });	2317	$handle->on_read (sub { });
1731	$handle->on_eof (undef);	2318	$handle->on_eof (undef);
1732	$handle->on_error (sub {	2319	$handle->on_error (sub {
1733	my $data = delete $_[0]{rbuf};	2320	my $data = delete $_[0]{rbuf};
1734	undef $handle;
1735	});	2321	});
		2322
		2323	Note that this example removes the C<rbuf> member from the handle object,
		2324	which is not normally allowed by the API. It is expressly permitted in
		2325	this case only, as the handle object needs to be destroyed afterwards.
1736		2326
1737	The reason to use C<on_error> is that TCP connections, due to latencies	2327	The reason to use C<on_error> is that TCP connections, due to latencies
1738	and packets loss, might get closed quite violently with an error, when in	2328	and packets loss, might get closed quite violently with an error, when in
1739	fact, all data has been received.	2329	fact all data has been received.
1740		2330
1741	It is usually better to use acknowledgements when transferring data,	2331	It is usually better to use acknowledgements when transferring data,
1742	to make sure the other side hasn't just died and you got the data	2332	to make sure the other side hasn't just died and you got the data
1743	intact. This is also one reason why so many internet protocols have an	2333	intact. This is also one reason why so many internet protocols have an
1744	explicit QUIT command.	2334	explicit QUIT command.
…		…
1751	C<low_water_mark> this will be called precisely when all data has been	2341	C<low_water_mark> this will be called precisely when all data has been
1752	written to the socket:	2342	written to the socket:
1753		2343
1754	$handle->push_write (...);	2344	$handle->push_write (...);
1755	$handle->on_drain (sub {	2345	$handle->on_drain (sub {
1756	warn "all data submitted to the kernel\n";	2346	AE::log debug => "All data submitted to the kernel.";
1757	undef $handle;	2347	undef $handle;
1758	});	2348	});
1759		2349
		2350	If you just want to queue some data and then signal EOF to the other side,
		2351	consider using C<< ->push_shutdown >> instead.
		2352
		2353	=item I want to contact a TLS/SSL server, I don't care about security.
		2354
		2355	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2356	connect to it and then create the AnyEvent::Handle with the C<tls>
		2357	parameter:
		2358
		2359	tcp_connect $host, $port, sub {
		2360	my ($fh) = @_;
		2361
		2362	my $handle = new AnyEvent::Handle
		2363	fh => $fh,
		2364	tls => "connect",
		2365	on_error => sub { ... };
		2366
		2367	$handle->push_write (...);
		2368	};
		2369
		2370	=item I want to contact a TLS/SSL server, I do care about security.
		2371
		2372	Then you should additionally enable certificate verification, including
		2373	peername verification, if the protocol you use supports it (see
		2374	L<AnyEvent::TLS>, C<verify_peername>).
		2375
		2376	E.g. for HTTPS:
		2377
		2378	tcp_connect $host, $port, sub {
		2379	my ($fh) = @_;
		2380
		2381	my $handle = new AnyEvent::Handle
		2382	fh => $fh,
		2383	peername => $host,
		2384	tls => "connect",
		2385	tls_ctx => { verify => 1, verify_peername => "https" },
		2386	...
		2387
		2388	Note that you must specify the hostname you connected to (or whatever
		2389	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2390	peername verification will be done.
		2391
		2392	The above will use the system-dependent default set of trusted CA
		2393	certificates. If you want to check against a specific CA, add the
		2394	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2395
		2396	tls_ctx => {
		2397	verify => 1,
		2398	verify_peername => "https",
		2399	ca_file => "my-ca-cert.pem",
		2400	},
		2401
		2402	=item I want to create a TLS/SSL server, how do I do that?
		2403
		2404	Well, you first need to get a server certificate and key. You have
		2405	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2406	self-signed certificate (cheap. check the search engine of your choice,
		2407	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2408	nice program for that purpose).
		2409
		2410	Then create a file with your private key (in PEM format, see
		2411	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2412	file should then look like this:
		2413
		2414	-----BEGIN RSA PRIVATE KEY-----
		2415	...header data
		2416	... lots of base64'y-stuff
		2417	-----END RSA PRIVATE KEY-----
		2418
		2419	-----BEGIN CERTIFICATE-----
		2420	... lots of base64'y-stuff
		2421	-----END CERTIFICATE-----
		2422
		2423	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2424	specify this file as C<cert_file>:
		2425
		2426	tcp_server undef, $port, sub {
		2427	my ($fh) = @_;
		2428
		2429	my $handle = new AnyEvent::Handle
		2430	fh => $fh,
		2431	tls => "accept",
		2432	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2433	...
		2434
		2435	When you have intermediate CA certificates that your clients might not
		2436	know about, just append them to the C<cert_file>.
		2437
1760	=back	2438	=back
1761
1762		2439
1763	=head1 SUBCLASSING AnyEvent::Handle	2440	=head1 SUBCLASSING AnyEvent::Handle
1764		2441
1765	In many cases, you might want to subclass AnyEvent::Handle.	2442	In many cases, you might want to subclass AnyEvent::Handle.
1766		2443
…		…
1783		2460
1784	=item * all members not documented here and not prefixed with an underscore	2461	=item * all members not documented here and not prefixed with an underscore
1785	are free to use in subclasses.	2462	are free to use in subclasses.
1786		2463
1787	Of course, new versions of AnyEvent::Handle may introduce more "public"	2464	Of course, new versions of AnyEvent::Handle may introduce more "public"
1788	member variables, but thats just life, at least it is documented.	2465	member variables, but that's just life. At least it is documented.
1789		2466
1790	=back	2467	=back
1791		2468
1792	=head1 AUTHOR	2469	=head1 AUTHOR
1793		2470
1794	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.	2471	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.
1795		2472
1796	=cut	2473	=cut
1797		2474
1798	1; # End of AnyEvent::Handle	2475	1
		2476

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines