ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.68 by root, Fri Jun 6 15:35:30 2008 UTC vs.
Revision 1.216 by root, Sun Jan 23 11:15:09 2011 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict;
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.151;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	warn "got error $msg\n";
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	stream-based filehandles (sockets, pipes, and other stream things).
52	on sockets see L<AnyEvent::Util>.
53		37
		38	The L<AnyEvent::Intro> tutorial contains some well-documented
		39	AnyEvent::Handle examples.
		40
54	In the following, when the documentation refers to of "bytes" then this	41	In the following, where the documentation refers to "bytes", it means
55	means characters. As sysread and syswrite are used for all I/O, their	42	characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
57		47
58	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
59	argument.	49	argument.
60		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
		79
		80	sub MAX_READ_SIZE() { 131072 }
		81
61	=head1 METHODS	82	=head1 METHODS
62		83
63	=over 4	84	=over 4
64		85
65	=item B<new (%args)>	86	=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
66		87
67	The constructor supports these arguments (all as key => value pairs).	88	The constructor supports these arguments (all as C<< key => value >> pairs).
68		89
69	=over 4	90	=over 4
70		91
71	=item fh => $filehandle [MANDATORY]	92	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
72		93
73	The filehandle this L<AnyEvent::Handle> object will operate on.	94	The filehandle this L<AnyEvent::Handle> object will operate on.
74
75	NOTE: The filehandle will be set to non-blocking (using	95	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	96	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		97	that mode.
77		98
		99	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		100
		101	Try to connect to the specified host and service (port), using
		102	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		103	default C<peername>.
		104
		105	You have to specify either this parameter, or C<fh>, above.
		106
		107	It is possible to push requests on the read and write queues, and modify
		108	properties of the stream, even while AnyEvent::Handle is connecting.
		109
		110	When this parameter is specified, then the C<on_prepare>,
		111	C<on_connect_error> and C<on_connect> callbacks will be called under the
		112	appropriate circumstances:
		113
		114	=over 4
		115
78	=item on_eof => $cb->($handle)	116	=item on_prepare => $cb->($handle)
79		117
80	Set the callback to be called when an end-of-file condition is detcted,	118	This (rarely used) callback is called before a new connection is
81	i.e. in the case of a socket, when the other side has closed the	119	attempted, but after the file handle has been created (you can access that
82	connection cleanly.	120	file handle via C<< $handle->{fh} >>). It could be used to prepare the
		121	file handle with parameters required for the actual connect (as opposed to
		122	settings that can be changed when the connection is already established).
83		123
84	While not mandatory, it is highly recommended to set an eof callback,	124	The return value of this callback should be the connect timeout value in
85	otherwise you might end up with a closed socket while you are still	125	seconds (or C<0>, or C<undef>, or the empty list, to indicate that the
86	waiting for data.	126	default timeout is to be used).
87		127
		128	=item on_connect => $cb->($handle, $host, $port, $retry->())
		129
		130	This callback is called when a connection has been successfully established.
		131
		132	The peer's numeric host and port (the socket peername) are passed as
		133	parameters, together with a retry callback.
		134
		135	If, for some reason, the handle is not acceptable, calling C<$retry>
		136	will continue with the next connection target (in case of multi-homed
		137	hosts or SRV records there can be multiple connection endpoints). At the
		138	time it is called the read and write queues, eof status, tls status and
		139	similar properties of the handle will have been reset.
		140
		141	In most cases, you should ignore the C<$retry> parameter.
		142
		143	=item on_connect_error => $cb->($handle, $message)
		144
		145	This callback is called when the connection could not be
		146	established. C<$!> will contain the relevant error code, and C<$message> a
		147	message describing it (usually the same as C<"$!">).
		148
		149	If this callback isn't specified, then C<on_error> will be called with a
		150	fatal error instead.
		151
		152	=back
		153
88	=item on_error => $cb->($handle, $fatal)	154	=item on_error => $cb->($handle, $fatal, $message)
89		155
90	This is the error callback, which is called when, well, some error	156	This is the error callback, which is called when, well, some error
91	occured, such as not being able to resolve the hostname, failure to	157	occured, such as not being able to resolve the hostname, failure to
92	connect or a read error.	158	connect, or a read error.
93		159
94	Some errors are fatal (which is indicated by C<$fatal> being true). On	160	Some errors are fatal (which is indicated by C<$fatal> being true). On
95	fatal errors the handle object will be shut down and will not be	161	fatal errors the handle object will be destroyed (by a call to C<< ->
		162	destroy >>) after invoking the error callback (which means you are free to
		163	examine the handle object). Examples of fatal errors are an EOF condition
		164	with active (but unsatisfiable) read watchers (C<EPIPE>) or I/O errors. In
		165	cases where the other side can close the connection at will, it is
		166	often easiest to not report C<EPIPE> errors in this callback.
		167
		168	AnyEvent::Handle tries to find an appropriate error code for you to check
		169	against, but in some cases (TLS errors), this does not work well. It is
		170	recommended to always output the C<$message> argument in human-readable
		171	error messages (it's usually the same as C<"$!">).
		172
96	usable. Non-fatal errors can be retried by simply returning, but it is	173	Non-fatal errors can be retried by returning, but it is recommended
97	recommended to simply ignore this parameter and instead abondon the handle	174	to simply ignore this parameter and instead abondon the handle object
98	object when this callback is invoked.	175	when this callback is invoked. Examples of non-fatal errors are timeouts
		176	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
99		177
100	On callback entrance, the value of C<$!> contains the operating system	178	On entry to the callback, the value of C<$!> contains the operating
101	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	179	system error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		180	C<EPROTO>).
102		181
103	While not mandatory, it is I<highly> recommended to set this callback, as	182	While not mandatory, it is I<highly> recommended to set this callback, as
104	you will not be notified of errors otherwise. The default simply calls	183	you will not be notified of errors otherwise. The default just calls
105	C<croak>.	184	C<croak>.
106		185
107	=item on_read => $cb->($handle)	186	=item on_read => $cb->($handle)
108		187
109	This sets the default read callback, which is called when data arrives	188	This sets the default read callback, which is called when data arrives
110	and no read request is in the queue (unlike read queue callbacks, this	189	and no read request is in the queue (unlike read queue callbacks, this
111	callback will only be called when at least one octet of data is in the	190	callback will only be called when at least one octet of data is in the
112	read buffer).	191	read buffer).
113		192
114	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	193	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
115	method or access the C<$handle->{rbuf}> member directly.	194	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		195	must not enlarge or modify the read buffer, you can only remove data at
		196	the beginning from it.
116		197
		198	You can also call C<< ->push_read (...) >> or any other function that
		199	modifies the read queue. Or do both. Or ...
		200
117	When an EOF condition is detected then AnyEvent::Handle will first try to	201	When an EOF condition is detected, AnyEvent::Handle will first try to
118	feed all the remaining data to the queued callbacks and C<on_read> before	202	feed all the remaining data to the queued callbacks and C<on_read> before
119	calling the C<on_eof> callback. If no progress can be made, then a fatal	203	calling the C<on_eof> callback. If no progress can be made, then a fatal
120	error will be raised (with C<$!> set to C<EPIPE>).	204	error will be raised (with C<$!> set to C<EPIPE>).
121		205
		206	Note that, unlike requests in the read queue, an C<on_read> callback
		207	doesn't mean you I<require> some data: if there is an EOF and there
		208	are outstanding read requests then an error will be flagged. With an
		209	C<on_read> callback, the C<on_eof> callback will be invoked.
		210
		211	=item on_eof => $cb->($handle)
		212
		213	Set the callback to be called when an end-of-file condition is detected,
		214	i.e. in the case of a socket, when the other side has closed the
		215	connection cleanly, and there are no outstanding read requests in the
		216	queue (if there are read requests, then an EOF counts as an unexpected
		217	connection close and will be flagged as an error).
		218
		219	For sockets, this just means that the other side has stopped sending data,
		220	you can still try to write data, and, in fact, one can return from the EOF
		221	callback and continue writing data, as only the read part has been shut
		222	down.
		223
		224	If an EOF condition has been detected but no C<on_eof> callback has been
		225	set, then a fatal error will be raised with C<$!> set to <0>.
		226
122	=item on_drain => $cb->($handle)	227	=item on_drain => $cb->($handle)
123		228
124	This sets the callback that is called when the write buffer becomes empty	229	This sets the callback that is called when the write buffer becomes empty
125	(or when the callback is set and the buffer is empty already).	230	(or immediately if the buffer is empty already).
126		231
127	To append to the write buffer, use the C<< ->push_write >> method.	232	To append to the write buffer, use the C<< ->push_write >> method.
128		233
		234	This callback is useful when you don't want to put all of your write data
		235	into the queue at once, for example, when you want to write the contents
		236	of some file to the socket you might not want to read the whole file into
		237	memory and push it into the queue, but instead only read more data from
		238	the file when the write queue becomes empty.
		239
129	=item timeout => $fractional_seconds	240	=item timeout => $fractional_seconds
130		241
		242	=item rtimeout => $fractional_seconds
		243
		244	=item wtimeout => $fractional_seconds
		245
131	If non-zero, then this enables an "inactivity" timeout: whenever this many	246	If non-zero, then these enables an "inactivity" timeout: whenever this
132	seconds pass without a successful read or write on the underlying file	247	many seconds pass without a successful read or write on the underlying
133	handle, the C<on_timeout> callback will be invoked (and if that one is	248	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
134	missing, an C<ETIMEDOUT> error will be raised).	249	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		250	error will be raised).
135		251
		252	There are three variants of the timeouts that work independently
		253	of each other, for both read and write, just read, and just write:
		254	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		255	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		256	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
		257
136	Note that timeout processing is also active when you currently do not have	258	Note that timeout processing is active even when you do not have
137	any outstanding read or write requests: If you plan to keep the connection	259	any outstanding read or write requests: If you plan to keep the connection
138	idle then you should disable the timout temporarily or ignore the timeout	260	idle then you should disable the timeout temporarily or ignore the timeout
139	in the C<on_timeout> callback.	261	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		262	restart the timeout.
140		263
141	Zero (the default) disables this timeout.	264	Zero (the default) disables this timeout.
142		265
143	=item on_timeout => $cb->($handle)	266	=item on_timeout => $cb->($handle)
144		267
…		…
148		271
149	=item rbuf_max => <bytes>	272	=item rbuf_max => <bytes>
150		273
151	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	274	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
152	when the read buffer ever (strictly) exceeds this size. This is useful to	275	when the read buffer ever (strictly) exceeds this size. This is useful to
153	avoid denial-of-service attacks.	276	avoid some forms of denial-of-service attacks.
154		277
155	For example, a server accepting connections from untrusted sources should	278	For example, a server accepting connections from untrusted sources should
156	be configured to accept only so-and-so much data that it cannot act on	279	be configured to accept only so-and-so much data that it cannot act on
157	(for example, when expecting a line, an attacker could send an unlimited	280	(for example, when expecting a line, an attacker could send an unlimited
158	amount of data without a callback ever being called as long as the line	281	amount of data without a callback ever being called as long as the line
159	isn't finished).	282	isn't finished).
160		283
		284	=item wbuf_max => <bytes>
		285
		286	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
		287	when the write buffer ever (strictly) exceeds this size. This is useful to
		288	avoid some forms of denial-of-service attacks.
		289
		290	Although the units of this parameter is bytes, this is the I<raw> number
		291	of bytes not yet accepted by the kernel. This can make a difference when
		292	you e.g. use TLS, as TLS typically makes your write data larger (but it
		293	can also make it smaller due to compression).
		294
		295	As an example of when this limit is useful, take a chat server that sends
		296	chat messages to a client. If the client does not read those in a timely
		297	manner then the send buffer in the server would grow unbounded.
		298
		299	=item autocork => <boolean>
		300
		301	When disabled (the default), C<push_write> will try to immediately
		302	write the data to the handle if possible. This avoids having to register
		303	a write watcher and wait for the next event loop iteration, but can
		304	be inefficient if you write multiple small chunks (on the wire, this
		305	disadvantage is usually avoided by your kernel's nagle algorithm, see
		306	C<no_delay>, but this option can save costly syscalls).
		307
		308	When enabled, writes will always be queued till the next event loop
		309	iteration. This is efficient when you do many small writes per iteration,
		310	but less efficient when you do a single write only per iteration (or when
		311	the write buffer often is full). It also increases write latency.
		312
		313	=item no_delay => <boolean>
		314
		315	When doing small writes on sockets, your operating system kernel might
		316	wait a bit for more data before actually sending it out. This is called
		317	the Nagle algorithm, and usually it is beneficial.
		318
		319	In some situations you want as low a delay as possible, which can be
		320	accomplishd by setting this option to a true value.
		321
		322	The default is your operating system's default behaviour (most likely
		323	enabled). This option explicitly enables or disables it, if possible.
		324
		325	=item keepalive => <boolean>
		326
		327	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		328	normally, TCP connections have no time-out once established, so TCP
		329	connections, once established, can stay alive forever even when the other
		330	side has long gone. TCP keepalives are a cheap way to take down long-lived
		331	TCP connections when the other side becomes unreachable. While the default
		332	is OS-dependent, TCP keepalives usually kick in after around two hours,
		333	and, if the other side doesn't reply, take down the TCP connection some 10
		334	to 15 minutes later.
		335
		336	It is harmless to specify this option for file handles that do not support
		337	keepalives, and enabling it on connections that are potentially long-lived
		338	is usually a good idea.
		339
		340	=item oobinline => <boolean>
		341
		342	BSD majorly fucked up the implementation of TCP urgent data. The result
		343	is that almost no OS implements TCP according to the specs, and every OS
		344	implements it slightly differently.
		345
		346	If you want to handle TCP urgent data, then setting this flag (the default
		347	is enabled) gives you the most portable way of getting urgent data, by
		348	putting it into the stream.
		349
		350	Since BSD emulation of OOB data on top of TCP's urgent data can have
		351	security implications, AnyEvent::Handle sets this flag automatically
		352	unless explicitly specified. Note that setting this flag after
		353	establishing a connection I<may> be a bit too late (data loss could
		354	already have occured on BSD systems), but at least it will protect you
		355	from most attacks.
		356
161	=item read_size => <bytes>	357	=item read_size => <bytes>
162		358
163	The default read block size (the amount of bytes this module will try to read	359	The initial read block size, the number of bytes this module will try to
164	during each (loop iteration). Default: C<8192>.	360	read during each loop iteration. Each handle object will consume at least
		361	this amount of memory for the read buffer as well, so when handling many
		362	connections requirements). See also C<max_read_size>. Default: C<2048>.
		363
		364	=item max_read_size => <bytes>
		365
		366	The maximum read buffer size used by the dynamic adjustment
		367	algorithm: Each time AnyEvent::Handle can read C<read_size> bytes in
		368	one go it will double C<read_size> up to the maximum given by this
		369	option. Default: C<131072> or C<read_size>, whichever is higher.
165		370
166	=item low_water_mark => <bytes>	371	=item low_water_mark => <bytes>
167		372
168	Sets the amount of bytes (default: C<0>) that make up an "empty" write	373	Sets the number of bytes (default: C<0>) that make up an "empty" write
169	buffer: If the write reaches this size or gets even samller it is	374	buffer: If the buffer reaches this size or gets even samller it is
170	considered empty.	375	considered empty.
171		376
		377	Sometimes it can be beneficial (for performance reasons) to add data to
		378	the write buffer before it is fully drained, but this is a rare case, as
		379	the operating system kernel usually buffers data as well, so the default
		380	is good in almost all cases.
		381
172	=item linger => <seconds>	382	=item linger => <seconds>
173		383
174	If non-zero (default: C<3600>), then the destructor of the	384	If this is non-zero (default: C<3600>), the destructor of the
175	AnyEvent::Handle object will check wether there is still outstanding write	385	AnyEvent::Handle object will check whether there is still outstanding
176	data and will install a watcher that will write out this data. No errors	386	write data and will install a watcher that will write this data to the
177	will be reported (this mostly matches how the operating system treats	387	socket. No errors will be reported (this mostly matches how the operating
178	outstanding data at socket close time).	388	system treats outstanding data at socket close time).
179		389
180	This will not work for partial TLS data that could not yet been	390	This will not work for partial TLS data that could not be encoded
181	encoded. This data will be lost.	391	yet. This data will be lost. Calling the C<stoptls> method in time might
		392	help.
		393
		394	=item peername => $string
		395
		396	A string used to identify the remote site - usually the DNS hostname
		397	(I<not> IDN!) used to create the connection, rarely the IP address.
		398
		399	Apart from being useful in error messages, this string is also used in TLS
		400	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		401	verification will be skipped when C<peername> is not specified or is
		402	C<undef>.
182		403
183	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	404	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
184		405
185	When this parameter is given, it enables TLS (SSL) mode, that means it	406	When this parameter is given, it enables TLS (SSL) mode, that means
186	will start making tls handshake and will transparently encrypt/decrypt	407	AnyEvent will start a TLS handshake as soon as the connection has been
187	data.	408	established and will transparently encrypt/decrypt data afterwards.
		409
		410	All TLS protocol errors will be signalled as C<EPROTO>, with an
		411	appropriate error message.
188		412
189	TLS mode requires Net::SSLeay to be installed (it will be loaded	413	TLS mode requires Net::SSLeay to be installed (it will be loaded
190	automatically when you try to create a TLS handle).	414	automatically when you try to create a TLS handle): this module doesn't
		415	have a dependency on that module, so if your module requires it, you have
		416	to add the dependency yourself.
191		417
192	For the TLS server side, use C<accept>, and for the TLS client side of a	418	Unlike TCP, TLS has a server and client side: for the TLS server side, use
193	connection, use C<connect> mode.	419	C<accept>, and for the TLS client side of a connection, use C<connect>
		420	mode.
194		421
195	You can also provide your own TLS connection object, but you have	422	You can also provide your own TLS connection object, but you have
196	to make sure that you call either C<Net::SSLeay::set_connect_state>	423	to make sure that you call either C<Net::SSLeay::set_connect_state>
197	or C<Net::SSLeay::set_accept_state> on it before you pass it to	424	or C<Net::SSLeay::set_accept_state> on it before you pass it to
198	AnyEvent::Handle.	425	AnyEvent::Handle. Also, this module will take ownership of this connection
		426	object.
199		427
		428	At some future point, AnyEvent::Handle might switch to another TLS
		429	implementation, then the option to use your own session object will go
		430	away.
		431
		432	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		433	passing in the wrong integer will lead to certain crash. This most often
		434	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		435	segmentation fault.
		436
200	See the C<starttls> method if you need to start TLs negotiation later.	437	Use the C<< ->starttls >> method if you need to start TLS negotiation later.
201		438
202	=item tls_ctx => $ssl_ctx	439	=item tls_ctx => $anyevent_tls
203		440
204	Use the given Net::SSLeay::CTX object to create the new TLS connection	441	Use the given C<AnyEvent::TLS> object to create the new TLS connection
205	(unless a connection object was specified directly). If this parameter is	442	(unless a connection object was specified directly). If this
206	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	443	parameter is missing (or C<undef>), then AnyEvent::Handle will use
		444	C<AnyEvent::Handle::TLS_CTX>.
		445
		446	Instead of an object, you can also specify a hash reference with C<< key
		447	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		448	new TLS context object.
		449
		450	=item on_starttls => $cb->($handle, $success[, $error_message])
		451
		452	This callback will be invoked when the TLS/SSL handshake has finished. If
		453	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		454	(C<on_stoptls> will not be called in this case).
		455
		456	The session in C<< $handle->{tls} >> can still be examined in this
		457	callback, even when the handshake was not successful.
		458
		459	TLS handshake failures will not cause C<on_error> to be invoked when this
		460	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		461
		462	Without this callback, handshake failures lead to C<on_error> being
		463	called as usual.
		464
		465	Note that you cannot just call C<starttls> again in this callback. If you
		466	need to do that, start an zero-second timer instead whose callback can
		467	then call C<< ->starttls >> again.
		468
		469	=item on_stoptls => $cb->($handle)
		470
		471	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		472	set, then it will be invoked after freeing the TLS session. If it is not,
		473	then a TLS shutdown condition will be treated like a normal EOF condition
		474	on the handle.
		475
		476	The session in C<< $handle->{tls} >> can still be examined in this
		477	callback.
		478
		479	This callback will only be called on TLS shutdowns, not when the
		480	underlying handle signals EOF.
207		481
208	=item json => JSON or JSON::XS object	482	=item json => JSON or JSON::XS object
209		483
210	This is the json coder object used by the C<json> read and write types.	484	This is the json coder object used by the C<json> read and write types.
211		485
212	If you don't supply it, then AnyEvent::Handle will create and use a	486	If you don't supply it, then AnyEvent::Handle will create and use a
213	suitable one, which will write and expect UTF-8 encoded JSON texts.	487	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		488	texts.
214		489
215	Note that you are responsible to depend on the JSON module if you want to	490	Note that you are responsible to depend on the JSON module if you want to
216	use this functionality, as AnyEvent does not have a dependency itself.	491	use this functionality, as AnyEvent does not have a dependency itself.
217		492
218	=item filter_r => $cb
219
220	=item filter_w => $cb
221
222	These exist, but are undocumented at this time.
223
224	=back	493	=back
225		494
226	=cut	495	=cut
227		496
228	sub new {	497	sub new {
229	my $class = shift;	498	my $class = shift;
230
231	my $self = bless { @_ }, $class;	499	my $self = bless { @_ }, $class;
232		500
233	$self->{fh} or Carp::croak "mandatory argument fh is missing";	501	if ($self->{fh}) {
		502	$self->_start;
		503	return unless $self->{fh}; # could be gone by now
		504
		505	} elsif ($self->{connect}) {
		506	require AnyEvent::Socket;
		507
		508	$self->{peername} = $self->{connect}[0]
		509	unless exists $self->{peername};
		510
		511	$self->{_skip_drain_rbuf} = 1;
		512
		513	{
		514	Scalar::Util::weaken (my $self = $self);
		515
		516	$self->{_connect} =
		517	AnyEvent::Socket::tcp_connect (
		518	$self->{connect}[0],
		519	$self->{connect}[1],
		520	sub {
		521	my ($fh, $host, $port, $retry) = @_;
		522
		523	delete $self->{_connect}; # no longer needed
		524
		525	if ($fh) {
		526	$self->{fh} = $fh;
		527
		528	delete $self->{_skip_drain_rbuf};
		529	$self->_start;
		530
		531	$self->{on_connect}
		532	and $self->{on_connect}($self, $host, $port, sub {
		533	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		534	$self->{_skip_drain_rbuf} = 1;
		535	&$retry;
		536	});
		537
		538	} else {
		539	if ($self->{on_connect_error}) {
		540	$self->{on_connect_error}($self, "$!");
		541	$self->destroy;
		542	} else {
		543	$self->_error ($!, 1);
		544	}
		545	}
		546	},
		547	sub {
		548	local $self->{fh} = $_[0];
		549
		550	$self->{on_prepare}
		551	? $self->{on_prepare}->($self)
		552	: ()
		553	}
		554	);
		555	}
		556
		557	} else {
		558	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		559	}
		560
		561	$self
		562	}
		563
		564	sub _start {
		565	my ($self) = @_;
		566
		567	# too many clueless people try to use udp and similar sockets
		568	# with AnyEvent::Handle, do them a favour.
		569	my $type = getsockopt $self->{fh}, Socket::SOL_SOCKET (), Socket::SO_TYPE ();
		570	Carp::croak "AnyEvent::Handle: only stream sockets supported, anything else will NOT work!"
		571	if Socket::SOCK_STREAM () != (unpack "I", $type) && defined $type;
234		572
235	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	573	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
236		574
237	if ($self->{tls}) {	575	$self->{_activity} =
238	require Net::SSLeay;	576	$self->{_ractivity} =
		577	$self->{_wactivity} = AE::now;
		578
		579	$self->{read_size} ||= 2048;
		580	$self->{max_read_size} = $self->{read_size}
		581	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		582
		583	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		584	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		585	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		586
		587	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		588	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		589
		590	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		591
239	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	592	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
240	}	593	if $self->{tls};
241		594
242	$self->{_activity} = AnyEvent->now;
243	$self->_timeout;
244
245	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	595	$self->on_drain (delete $self->{on_drain} ) if $self->{on_drain};
246		596
247	$self->start_read	597	$self->start_read
248	if $self->{on_read};	598	if $self->{on_read} || @{ $self->{_queue} };
249		599
250	$self	600	$self->_drain_wbuf;
251	}
252
253	sub _shutdown {
254	my ($self) = @_;
255
256	delete $self->{_tw};
257	delete $self->{_rw};
258	delete $self->{_ww};
259	delete $self->{fh};
260
261	$self->stoptls;
262	}	601	}
263		602
264	sub _error {	603	sub _error {
265	my ($self, $errno, $fatal) = @_;	604	my ($self, $errno, $fatal, $message) = @_;
266
267	$self->_shutdown
268	if $fatal;
269		605
270	$! = $errno;	606	$! = $errno;
		607	$message ||= "$!";
271		608
272	if ($self->{on_error}) {	609	if ($self->{on_error}) {
273	$self->{on_error}($self, $fatal);	610	$self->{on_error}($self, $fatal, $message);
274	} else {	611	$self->destroy if $fatal;
		612	} elsif ($self->{fh} || $self->{connect}) {
		613	$self->destroy;
275	Carp::croak "AnyEvent::Handle uncaught error: $!";	614	Carp::croak "AnyEvent::Handle uncaught error: $message";
276	}	615	}
277	}	616	}
278		617
279	=item $fh = $handle->fh	618	=item $fh = $handle->fh
280		619
281	This method returns the file handle of the L<AnyEvent::Handle> object.	620	This method returns the file handle used to create the L<AnyEvent::Handle> object.
282		621
283	=cut	622	=cut
284		623
285	sub fh { $_[0]{fh} }	624	sub fh { $_[0]{fh} }
286		625
…		…
304	$_[0]{on_eof} = $_[1];	643	$_[0]{on_eof} = $_[1];
305	}	644	}
306		645
307	=item $handle->on_timeout ($cb)	646	=item $handle->on_timeout ($cb)
308		647
309	Replace the current C<on_timeout> callback, or disables the callback	648	=item $handle->on_rtimeout ($cb)
310	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor
311	argument.
312		649
313	=cut	650	=item $handle->on_wtimeout ($cb)
314		651
		652	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
		653	callback, or disables the callback (but not the timeout) if C<$cb> =
		654	C<undef>. See the C<timeout> constructor argument and method.
		655
		656	=cut
		657
		658	# see below
		659
		660	=item $handle->autocork ($boolean)
		661
		662	Enables or disables the current autocork behaviour (see C<autocork>
		663	constructor argument). Changes will only take effect on the next write.
		664
		665	=cut
		666
		667	sub autocork {
		668	$_[0]{autocork} = $_[1];
		669	}
		670
		671	=item $handle->no_delay ($boolean)
		672
		673	Enables or disables the C<no_delay> setting (see constructor argument of
		674	the same name for details).
		675
		676	=cut
		677
		678	sub no_delay {
		679	$_[0]{no_delay} = $_[1];
		680
		681	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		682	if $_[0]{fh};
		683	}
		684
		685	=item $handle->keepalive ($boolean)
		686
		687	Enables or disables the C<keepalive> setting (see constructor argument of
		688	the same name for details).
		689
		690	=cut
		691
		692	sub keepalive {
		693	$_[0]{keepalive} = $_[1];
		694
		695	eval {
		696	local $SIG{__DIE__};
		697	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		698	if $_[0]{fh};
		699	};
		700	}
		701
		702	=item $handle->oobinline ($boolean)
		703
		704	Enables or disables the C<oobinline> setting (see constructor argument of
		705	the same name for details).
		706
		707	=cut
		708
		709	sub oobinline {
		710	$_[0]{oobinline} = $_[1];
		711
		712	eval {
		713	local $SIG{__DIE__};
		714	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		715	if $_[0]{fh};
		716	};
		717	}
		718
		719	=item $handle->keepalive ($boolean)
		720
		721	Enables or disables the C<keepalive> setting (see constructor argument of
		722	the same name for details).
		723
		724	=cut
		725
		726	sub keepalive {
		727	$_[0]{keepalive} = $_[1];
		728
		729	eval {
		730	local $SIG{__DIE__};
		731	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		732	if $_[0]{fh};
		733	};
		734	}
		735
		736	=item $handle->on_starttls ($cb)
		737
		738	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		739
		740	=cut
		741
		742	sub on_starttls {
		743	$_[0]{on_starttls} = $_[1];
		744	}
		745
		746	=item $handle->on_stoptls ($cb)
		747
		748	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		749
		750	=cut
		751
315	sub on_timeout {	752	sub on_stoptls {
316	$_[0]{on_timeout} = $_[1];	753	$_[0]{on_stoptls} = $_[1];
		754	}
		755
		756	=item $handle->rbuf_max ($max_octets)
		757
		758	Configures the C<rbuf_max> setting (C<undef> disables it).
		759
		760	=item $handle->wbuf_max ($max_octets)
		761
		762	Configures the C<wbuf_max> setting (C<undef> disables it).
		763
		764	=cut
		765
		766	sub rbuf_max {
		767	$_[0]{rbuf_max} = $_[1];
		768	}
		769
		770	sub wbuf_max {
		771	$_[0]{wbuf_max} = $_[1];
317	}	772	}
318		773
319	#############################################################################	774	#############################################################################
320		775
321	=item $handle->timeout ($seconds)	776	=item $handle->timeout ($seconds)
322		777
		778	=item $handle->rtimeout ($seconds)
		779
		780	=item $handle->wtimeout ($seconds)
		781
323	Configures (or disables) the inactivity timeout.	782	Configures (or disables) the inactivity timeout.
324		783
325	=cut	784	=item $handle->timeout_reset
326		785
327	sub timeout {	786	=item $handle->rtimeout_reset
		787
		788	=item $handle->wtimeout_reset
		789
		790	Reset the activity timeout, as if data was received or sent.
		791
		792	These methods are cheap to call.
		793
		794	=cut
		795
		796	for my $dir ("", "r", "w") {
		797	my $timeout = "${dir}timeout";
		798	my $tw = "_${dir}tw";
		799	my $on_timeout = "on_${dir}timeout";
		800	my $activity = "_${dir}activity";
		801	my $cb;
		802
		803	*$on_timeout = sub {
		804	$_[0]{$on_timeout} = $_[1];
		805	};
		806
		807	*$timeout = sub {
328	my ($self, $timeout) = @_;	808	my ($self, $new_value) = @_;
329		809
		810	$new_value >= 0
		811	or Carp::croak "AnyEvent::Handle->$timeout called with negative timeout ($new_value), caught";
		812
330	$self->{timeout} = $timeout;	813	$self->{$timeout} = $new_value;
331	$self->_timeout;	814	delete $self->{$tw}; &$cb;
332	}	815	};
333		816
		817	*{"${dir}timeout_reset"} = sub {
		818	$_[0]{$activity} = AE::now;
		819	};
		820
		821	# main workhorse:
334	# reset the timeout watcher, as neccessary	822	# reset the timeout watcher, as neccessary
335	# also check for time-outs	823	# also check for time-outs
336	sub _timeout {	824	$cb = sub {
337	my ($self) = @_;	825	my ($self) = @_;
338		826
339	if ($self->{timeout}) {	827	if ($self->{$timeout} && $self->{fh}) {
340	my $NOW = AnyEvent->now;	828	my $NOW = AE::now;
341		829
342	# when would the timeout trigger?	830	# when would the timeout trigger?
343	my $after = $self->{_activity} + $self->{timeout} - $NOW;	831	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
344		832
345	# now or in the past already?	833	# now or in the past already?
346	if ($after <= 0) {	834	if ($after <= 0) {
347	$self->{_activity} = $NOW;	835	$self->{$activity} = $NOW;
348		836
349	if ($self->{on_timeout}) {	837	if ($self->{$on_timeout}) {
350	$self->{on_timeout}($self);	838	$self->{$on_timeout}($self);
351	} else {	839	} else {
352	$self->_error (&Errno::ETIMEDOUT);	840	$self->_error (Errno::ETIMEDOUT);
		841	}
		842
		843	# callback could have changed timeout value, optimise
		844	return unless $self->{$timeout};
		845
		846	# calculate new after
		847	$after = $self->{$timeout};
353	}	848	}
354		849
355	# callback could have changed timeout value, optimise	850	Scalar::Util::weaken $self;
356	return unless $self->{timeout};	851	return unless $self; # ->error could have destroyed $self
357		852
358	# calculate new after	853	$self->{$tw} ||= AE::timer $after, 0, sub {
359	$after = $self->{timeout};	854	delete $self->{$tw};
		855	$cb->($self);
		856	};
		857	} else {
		858	delete $self->{$tw};
360	}	859	}
361
362	Scalar::Util::weaken $self;
363	return unless $self; # ->error could have destroyed $self
364
365	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
366	delete $self->{_tw};
367	$self->_timeout;
368	});
369	} else {
370	delete $self->{_tw};
371	}	860	}
372	}	861	}
373		862
374	#############################################################################	863	#############################################################################
375		864
…		…
391	=item $handle->on_drain ($cb)	880	=item $handle->on_drain ($cb)
392		881
393	Sets the C<on_drain> callback or clears it (see the description of	882	Sets the C<on_drain> callback or clears it (see the description of
394	C<on_drain> in the constructor).	883	C<on_drain> in the constructor).
395		884
		885	This method may invoke callbacks (and therefore the handle might be
		886	destroyed after it returns).
		887
396	=cut	888	=cut
397		889
398	sub on_drain {	890	sub on_drain {
399	my ($self, $cb) = @_;	891	my ($self, $cb) = @_;
400		892
401	$self->{on_drain} = $cb;	893	$self->{on_drain} = $cb;
402		894
403	$cb->($self)	895	$cb->($self)
404	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	896	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
405	}	897	}
406		898
407	=item $handle->push_write ($data)	899	=item $handle->push_write ($data)
408		900
409	Queues the given scalar to be written. You can push as much data as you	901	Queues the given scalar to be written. You can push as much data as
410	want (only limited by the available memory), as C<AnyEvent::Handle>	902	you want (only limited by the available memory and C<wbuf_max>), as
411	buffers it independently of the kernel.	903	C<AnyEvent::Handle> buffers it independently of the kernel.
		904
		905	This method may invoke callbacks (and therefore the handle might be
		906	destroyed after it returns).
412		907
413	=cut	908	=cut
414		909
415	sub _drain_wbuf {	910	sub _drain_wbuf {
416	my ($self) = @_;	911	my ($self) = @_;
…		…
420	Scalar::Util::weaken $self;	915	Scalar::Util::weaken $self;
421		916
422	my $cb = sub {	917	my $cb = sub {
423	my $len = syswrite $self->{fh}, $self->{wbuf};	918	my $len = syswrite $self->{fh}, $self->{wbuf};
424		919
425	if ($len >= 0) {	920	if (defined $len) {
426	substr $self->{wbuf}, 0, $len, "";	921	substr $self->{wbuf}, 0, $len, "";
427		922
428	$self->{_activity} = AnyEvent->now;	923	$self->{_activity} = $self->{_wactivity} = AE::now;
429		924
430	$self->{on_drain}($self)	925	$self->{on_drain}($self)
431	if $self->{low_water_mark} >= length $self->{wbuf}	926	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
432	&& $self->{on_drain};	927	&& $self->{on_drain};
433		928
434	delete $self->{_ww} unless length $self->{wbuf};	929	delete $self->{_ww} unless length $self->{wbuf};
435	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	930	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
436	$self->_error ($!, 1);	931	$self->_error ($!, 1);
437	}	932	}
438	};	933	};
439		934
440	# try to write data immediately	935	# try to write data immediately
441	$cb->();	936	$cb->() unless $self->{autocork};
442		937
443	# if still data left in wbuf, we need to poll	938	# if still data left in wbuf, we need to poll
444	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	939	$self->{_ww} = AE::io $self->{fh}, 1, $cb
445	if length $self->{wbuf};	940	if length $self->{wbuf};
		941
		942	if (
		943	defined $self->{wbuf_max}
		944	&& $self->{wbuf_max} < length $self->{wbuf}
		945	) {
		946	$self->_error (Errno::ENOSPC, 1), return;
		947	}
446	};	948	};
447	}	949	}
448		950
449	our %WH;	951	our %WH;
450		952
		953	# deprecated
451	sub register_write_type($$) {	954	sub register_write_type($$) {
452	$WH{$_[0]} = $_[1];	955	$WH{$_[0]} = $_[1];
453	}	956	}
454		957
455	sub push_write {	958	sub push_write {
456	my $self = shift;	959	my $self = shift;
457		960
458	if (@_ > 1) {	961	if (@_ > 1) {
459	my $type = shift;	962	my $type = shift;
460		963
		964	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
461	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	965	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
462	->($self, @_);	966	->($self, @_);
463	}	967	}
464		968
		969	# we downgrade here to avoid hard-to-track-down bugs,
		970	# and diagnose the problem earlier and better.
		971
465	if ($self->{filter_w}) {	972	if ($self->{tls}) {
466	$self->{filter_w}($self, \$_[0]);	973	utf8::downgrade $self->{_tls_wbuf} .= $_[0];
		974	&_dotls ($self) if $self->{fh};
467	} else {	975	} else {
468	$self->{wbuf} .= $_[0];	976	utf8::downgrade $self->{wbuf} .= $_[0];
469	$self->_drain_wbuf;	977	$self->_drain_wbuf if $self->{fh};
470	}	978	}
471	}	979	}
472		980
473	=item $handle->push_write (type => @args)	981	=item $handle->push_write (type => @args)
474		982
475	Instead of formatting your data yourself, you can also let this module do	983	Instead of formatting your data yourself, you can also let this module
476	the job by specifying a type and type-specific arguments.	984	do the job by specifying a type and type-specific arguments. You
		985	can also specify the (fully qualified) name of a package, in which
		986	case AnyEvent tries to load the package and then expects to find the
		987	C<anyevent_write_type> function inside (see "custom write types", below).
477		988
478	Predefined types are (if you have ideas for additional types, feel free to	989	Predefined types are (if you have ideas for additional types, feel free to
479	drop by and tell us):	990	drop by and tell us):
480		991
481	=over 4	992	=over 4
…		…
488	=cut	999	=cut
489		1000
490	register_write_type netstring => sub {	1001	register_write_type netstring => sub {
491	my ($self, $string) = @_;	1002	my ($self, $string) = @_;
492		1003
493	sprintf "%d:%s,", (length $string), $string	1004	(length $string) . ":$string,"
494	};	1005	};
495		1006
496	=item packstring => $format, $data	1007	=item packstring => $format, $data
497		1008
498	An octet string prefixed with an encoded length. The encoding C<$format>	1009	An octet string prefixed with an encoded length. The encoding C<$format>
…		…
538	Other languages could read single lines terminated by a newline and pass	1049	Other languages could read single lines terminated by a newline and pass
539	this line into their JSON decoder of choice.	1050	this line into their JSON decoder of choice.
540		1051
541	=cut	1052	=cut
542		1053
		1054	sub json_coder() {
		1055	eval { require JSON::XS; JSON::XS->new->utf8 }
		1056	|| do { require JSON; JSON->new->utf8 }
		1057	}
		1058
543	register_write_type json => sub {	1059	register_write_type json => sub {
544	my ($self, $ref) = @_;	1060	my ($self, $ref) = @_;
545		1061
546	require JSON;	1062	my $json = $self->{json} ||= json_coder;
547		1063
548	$self->{json} ? $self->{json}->encode ($ref)	1064	$json->encode ($ref)
549	: JSON::encode_json ($ref)
550	};	1065	};
551		1066
552	=item storable => $reference	1067	=item storable => $reference
553		1068
554	Freezes the given reference using L<Storable> and writes it to the	1069	Freezes the given reference using L<Storable> and writes it to the
…		…
564	pack "w/a*", Storable::nfreeze ($ref)	1079	pack "w/a*", Storable::nfreeze ($ref)
565	};	1080	};
566		1081
567	=back	1082	=back
568		1083
569	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1084	=item $handle->push_shutdown
570		1085
571	This function (not method) lets you add your own types to C<push_write>.	1086	Sometimes you know you want to close the socket after writing your data
		1087	before it was actually written. One way to do that is to replace your
		1088	C<on_drain> handler by a callback that shuts down the socket (and set
		1089	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1090	replaces the C<on_drain> callback with:
		1091
		1092	sub { shutdown $_[0]{fh}, 1 }
		1093
		1094	This simply shuts down the write side and signals an EOF condition to the
		1095	the peer.
		1096
		1097	You can rely on the normal read queue and C<on_eof> handling
		1098	afterwards. This is the cleanest way to close a connection.
		1099
		1100	This method may invoke callbacks (and therefore the handle might be
		1101	destroyed after it returns).
		1102
		1103	=cut
		1104
		1105	sub push_shutdown {
		1106	my ($self) = @_;
		1107
		1108	delete $self->{low_water_mark};
		1109	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1110	}
		1111
		1112	=item custom write types - Package::anyevent_write_type $handle, @args
		1113
		1114	Instead of one of the predefined types, you can also specify the name of
		1115	a package. AnyEvent will try to load the package and then expects to find
		1116	a function named C<anyevent_write_type> inside. If it isn't found, it
		1117	progressively tries to load the parent package until it either finds the
		1118	function (good) or runs out of packages (bad).
		1119
572	Whenever the given C<type> is used, C<push_write> will invoke the code	1120	Whenever the given C<type> is used, C<push_write> will the function with
573	reference with the handle object and the remaining arguments.	1121	the handle object and the remaining arguments.
574		1122
575	The code reference is supposed to return a single octet string that will	1123	The function is supposed to return a single octet string that will be
576	be appended to the write buffer.	1124	appended to the write buffer, so you cna mentally treat this function as a
		1125	"arguments to on-the-wire-format" converter.
577		1126
578	Note that this is a function, and all types registered this way will be	1127	Example: implement a custom write type C<join> that joins the remaining
579	global, so try to use unique names.	1128	arguments using the first one.
		1129
		1130	$handle->push_write (My::Type => " ", 1,2,3);
		1131
		1132	# uses the following package, which can be defined in the "My::Type" or in
		1133	# the "My" modules to be auto-loaded, or just about anywhere when the
		1134	# My::Type::anyevent_write_type is defined before invoking it.
		1135
		1136	package My::Type;
		1137
		1138	sub anyevent_write_type {
		1139	my ($handle, $delim, @args) = @_;
		1140
		1141	join $delim, @args
		1142	}
580		1143
581	=cut	1144	=cut
582		1145
583	#############################################################################	1146	#############################################################################
584		1147
…		…
593	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1156	ways, the "simple" way, using only C<on_read> and the "complex" way, using
594	a queue.	1157	a queue.
595		1158
596	In the simple case, you just install an C<on_read> callback and whenever	1159	In the simple case, you just install an C<on_read> callback and whenever
597	new data arrives, it will be called. You can then remove some data (if	1160	new data arrives, it will be called. You can then remove some data (if
598	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	1161	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you can
599	or not.	1162	leave the data there if you want to accumulate more (e.g. when only a
		1163	partial message has been received so far), or change the read queue with
		1164	e.g. C<push_read>.
600		1165
601	In the more complex case, you want to queue multiple callbacks. In this	1166	In the more complex case, you want to queue multiple callbacks. In this
602	case, AnyEvent::Handle will call the first queued callback each time new	1167	case, AnyEvent::Handle will call the first queued callback each time new
603	data arrives (also the first time it is queued) and removes it when it has	1168	data arrives (also the first time it is queued) and remove it when it has
604	done its job (see C<push_read>, below).	1169	done its job (see C<push_read>, below).
605		1170
606	This way you can, for example, push three line-reads, followed by reading	1171	This way you can, for example, push three line-reads, followed by reading
607	a chunk of data, and AnyEvent::Handle will execute them in order.	1172	a chunk of data, and AnyEvent::Handle will execute them in order.
608		1173
…		…
622	# handle xml	1187	# handle xml
623	});	1188	});
624	});	1189	});
625	});	1190	});
626		1191
627	Example 2: Implement a client for a protocol that replies either with	1192	Example 2: Implement a client for a protocol that replies either with "OK"
628	"OK" and another line or "ERROR" for one request, and 64 bytes for the	1193	and another line or "ERROR" for the first request that is sent, and 64
629	second request. Due tot he availability of a full queue, we can just	1194	bytes for the second request. Due to the availability of a queue, we can
630	pipeline sending both requests and manipulate the queue as necessary in	1195	just pipeline sending both requests and manipulate the queue as necessary
631	the callbacks:	1196	in the callbacks.
632		1197
633	# request one	1198	When the first callback is called and sees an "OK" response, it will
		1199	C<unshift> another line-read. This line-read will be queued I<before> the
		1200	64-byte chunk callback.
		1201
		1202	# request one, returns either "OK + extra line" or "ERROR"
634	$handle->push_write ("request 1\015\012");	1203	$handle->push_write ("request 1\015\012");
635		1204
636	# we expect "ERROR" or "OK" as response, so push a line read	1205	# we expect "ERROR" or "OK" as response, so push a line read
637	$handle->push_read (line => sub {	1206	$handle->push_read (line => sub {
638	# if we got an "OK", we have to _prepend_ another line,	1207	# if we got an "OK", we have to _prepend_ another line,
…		…
645	...	1214	...
646	});	1215	});
647	}	1216	}
648	});	1217	});
649		1218
650	# request two	1219	# request two, simply returns 64 octets
651	$handle->push_write ("request 2\015\012");	1220	$handle->push_write ("request 2\015\012");
652		1221
653	# simply read 64 bytes, always	1222	# simply read 64 bytes, always
654	$handle->push_read (chunk => 64, sub {	1223	$handle->push_read (chunk => 64, sub {
655	my $response = $_[1];	1224	my $response = $_[1];
…		…
661	=cut	1230	=cut
662		1231
663	sub _drain_rbuf {	1232	sub _drain_rbuf {
664	my ($self) = @_;	1233	my ($self) = @_;
665		1234
		1235	# avoid recursion
		1236	return if $self->{_skip_drain_rbuf};
666	local $self->{_in_drain} = 1;	1237	local $self->{_skip_drain_rbuf} = 1;
667
668	if (
669	defined $self->{rbuf_max}
670	&& $self->{rbuf_max} < length $self->{rbuf}
671	) {
672	return $self->_error (&Errno::ENOSPC, 1);
673	}
674		1238
675	while () {	1239	while () {
676	no strict 'refs';	1240	# we need to use a separate tls read buffer, as we must not receive data while
		1241	# we are draining the buffer, and this can only happen with TLS.
		1242	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1243	if exists $self->{_tls_rbuf};
677		1244
678	my $len = length $self->{rbuf};	1245	my $len = length $self->{rbuf};
679		1246
680	if (my $cb = shift @{ $self->{_queue} }) {	1247	if (my $cb = shift @{ $self->{_queue} }) {
681	unless ($cb->($self)) {	1248	unless ($cb->($self)) {
682	if ($self->{_eof}) {	1249	# no progress can be made
683	# no progress can be made (not enough data and no data forthcoming)	1250	# (not enough data and no data forthcoming)
684	$self->_error (&Errno::EPIPE, 1), last;	1251	$self->_error (Errno::EPIPE, 1), return
685	}	1252	if $self->{_eof};
686		1253
687	unshift @{ $self->{_queue} }, $cb;	1254	unshift @{ $self->{_queue} }, $cb;
688	last;	1255	last;
689	}	1256	}
690	} elsif ($self->{on_read}) {	1257	} elsif ($self->{on_read}) {
…		…
697	&& !@{ $self->{_queue} } # and the queue is still empty	1264	&& !@{ $self->{_queue} } # and the queue is still empty
698	&& $self->{on_read} # but we still have on_read	1265	&& $self->{on_read} # but we still have on_read
699	) {	1266	) {
700	# no further data will arrive	1267	# no further data will arrive
701	# so no progress can be made	1268	# so no progress can be made
702	$self->_error (&Errno::EPIPE, 1), last	1269	$self->_error (Errno::EPIPE, 1), return
703	if $self->{_eof};	1270	if $self->{_eof};
704		1271
705	last; # more data might arrive	1272	last; # more data might arrive
706	}	1273	}
707	} else {	1274	} else {
708	# read side becomes idle	1275	# read side becomes idle
709	delete $self->{_rw};	1276	delete $self->{_rw} unless $self->{tls};
710	last;	1277	last;
711	}	1278	}
712	}	1279	}
713		1280
		1281	if ($self->{_eof}) {
		1282	$self->{on_eof}
714	$self->{on_eof}($self)	1283	? $self->{on_eof}($self)
715	if $self->{_eof} && $self->{on_eof};	1284	: $self->_error (0, 1, "Unexpected end-of-file");
		1285
		1286	return;
		1287	}
		1288
		1289	if (
		1290	defined $self->{rbuf_max}
		1291	&& $self->{rbuf_max} < length $self->{rbuf}
		1292	) {
		1293	$self->_error (Errno::ENOSPC, 1), return;
		1294	}
716		1295
717	# may need to restart read watcher	1296	# may need to restart read watcher
718	unless ($self->{_rw}) {	1297	unless ($self->{_rw}) {
719	$self->start_read	1298	$self->start_read
720	if $self->{on_read} || @{ $self->{_queue} };	1299	if $self->{on_read} || @{ $self->{_queue} };
…		…
725		1304
726	This replaces the currently set C<on_read> callback, or clears it (when	1305	This replaces the currently set C<on_read> callback, or clears it (when
727	the new callback is C<undef>). See the description of C<on_read> in the	1306	the new callback is C<undef>). See the description of C<on_read> in the
728	constructor.	1307	constructor.
729		1308
		1309	This method may invoke callbacks (and therefore the handle might be
		1310	destroyed after it returns).
		1311
730	=cut	1312	=cut
731		1313
732	sub on_read {	1314	sub on_read {
733	my ($self, $cb) = @_;	1315	my ($self, $cb) = @_;
734		1316
735	$self->{on_read} = $cb;	1317	$self->{on_read} = $cb;
736	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1318	$self->_drain_rbuf if $cb;
737	}	1319	}
738		1320
739	=item $handle->rbuf	1321	=item $handle->rbuf
740		1322
741	Returns the read buffer (as a modifiable lvalue).	1323	Returns the read buffer (as a modifiable lvalue). You can also access the
		1324	read buffer directly as the C<< ->{rbuf} >> member, if you want (this is
		1325	much faster, and no less clean).
742		1326
743	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1327	The only operation allowed on the read buffer (apart from looking at it)
744	you want.	1328	is removing data from its beginning. Otherwise modifying or appending to
		1329	it is not allowed and will lead to hard-to-track-down bugs.
745		1330
746	NOTE: The read buffer should only be used or modified if the C<on_read>,	1331	NOTE: The read buffer should only be used or modified in the C<on_read>
747	C<push_read> or C<unshift_read> methods are used. The other read methods	1332	callback or when C<push_read> or C<unshift_read> are used with a single
748	automatically manage the read buffer.	1333	callback (i.e. untyped). Typed C<push_read> and C<unshift_read> methods
		1334	will manage the read buffer on their own.
749		1335
750	=cut	1336	=cut
751		1337
752	sub rbuf : lvalue {	1338	sub rbuf : lvalue {
753	$_[0]{rbuf}	1339	$_[0]{rbuf}
…		…
770		1356
771	If enough data was available, then the callback must remove all data it is	1357	If enough data was available, then the callback must remove all data it is
772	interested in (which can be none at all) and return a true value. After returning	1358	interested in (which can be none at all) and return a true value. After returning
773	true, it will be removed from the queue.	1359	true, it will be removed from the queue.
774		1360
		1361	These methods may invoke callbacks (and therefore the handle might be
		1362	destroyed after it returns).
		1363
775	=cut	1364	=cut
776		1365
777	our %RH;	1366	our %RH;
778		1367
779	sub register_read_type($$) {	1368	sub register_read_type($$) {
…		…
785	my $cb = pop;	1374	my $cb = pop;
786		1375
787	if (@_) {	1376	if (@_) {
788	my $type = shift;	1377	my $type = shift;
789		1378
		1379	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
790	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1380	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
791	->($self, $cb, @_);	1381	->($self, $cb, @_);
792	}	1382	}
793		1383
794	push @{ $self->{_queue} }, $cb;	1384	push @{ $self->{_queue} }, $cb;
795	$self->_drain_rbuf unless $self->{_in_drain};	1385	$self->_drain_rbuf;
796	}	1386	}
797		1387
798	sub unshift_read {	1388	sub unshift_read {
799	my $self = shift;	1389	my $self = shift;
800	my $cb = pop;	1390	my $cb = pop;
801		1391
802	if (@_) {	1392	if (@_) {
803	my $type = shift;	1393	my $type = shift;
804		1394
		1395	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
805	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1396	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::unshift_read")
806	->($self, $cb, @_);	1397	->($self, $cb, @_);
807	}	1398	}
808		1399
809
810	unshift @{ $self->{_queue} }, $cb;	1400	unshift @{ $self->{_queue} }, $cb;
811	$self->_drain_rbuf unless $self->{_in_drain};	1401	$self->_drain_rbuf;
812	}	1402	}
813		1403
814	=item $handle->push_read (type => @args, $cb)	1404	=item $handle->push_read (type => @args, $cb)
815		1405
816	=item $handle->unshift_read (type => @args, $cb)	1406	=item $handle->unshift_read (type => @args, $cb)
817		1407
818	Instead of providing a callback that parses the data itself you can chose	1408	Instead of providing a callback that parses the data itself you can chose
819	between a number of predefined parsing formats, for chunks of data, lines	1409	between a number of predefined parsing formats, for chunks of data, lines
820	etc.	1410	etc. You can also specify the (fully qualified) name of a package, in
		1411	which case AnyEvent tries to load the package and then expects to find the
		1412	C<anyevent_read_type> function inside (see "custom read types", below).
821		1413
822	Predefined types are (if you have ideas for additional types, feel free to	1414	Predefined types are (if you have ideas for additional types, feel free to
823	drop by and tell us):	1415	drop by and tell us):
824		1416
825	=over 4	1417	=over 4
…		…
846	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	1438	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
847	1	1439	1
848	}	1440	}
849	};	1441	};
850		1442
851	# compatibility with older API
852	sub push_read_chunk {
853	$_[0]->push_read (chunk => $_[1], $_[2]);
854	}
855
856	sub unshift_read_chunk {
857	$_[0]->unshift_read (chunk => $_[1], $_[2]);
858	}
859
860	=item line => [$eol, ]$cb->($handle, $line, $eol)	1443	=item line => [$eol, ]$cb->($handle, $line, $eol)
861		1444
862	The callback will be called only once a full line (including the end of	1445	The callback will be called only once a full line (including the end of
863	line marker, C<$eol>) has been read. This line (excluding the end of line	1446	line marker, C<$eol>) has been read. This line (excluding the end of line
864	marker) will be passed to the callback as second argument (C<$line>), and	1447	marker) will be passed to the callback as second argument (C<$line>), and
…		…
879	=cut	1462	=cut
880		1463
881	register_read_type line => sub {	1464	register_read_type line => sub {
882	my ($self, $cb, $eol) = @_;	1465	my ($self, $cb, $eol) = @_;
883		1466
884	$eol = qr|(\015?\012)| if @_ < 3;	1467	if (@_ < 3) {
		1468	# this is more than twice as fast as the generic code below
		1469	sub {
		1470	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
		1471
		1472	$cb->($_[0], $1, $2);
		1473	1
		1474	}
		1475	} else {
885	$eol = quotemeta $eol unless ref $eol;	1476	$eol = quotemeta $eol unless ref $eol;
886	$eol = qr|^(.*?)($eol)|s;	1477	$eol = qr|^(.*?)($eol)|s;
887		1478
888	sub {	1479	sub {
889	$_[0]{rbuf} =~ s/$eol// or return;	1480	$_[0]{rbuf} =~ s/$eol// or return;
890		1481
891	$cb->($_[0], $1, $2);	1482	$cb->($_[0], $1, $2);
		1483	1
892	1	1484	}
893	}	1485	}
894	};	1486	};
895
896	# compatibility with older API
897	sub push_read_line {
898	my $self = shift;
899	$self->push_read (line => @_);
900	}
901
902	sub unshift_read_line {
903	my $self = shift;
904	$self->unshift_read (line => @_);
905	}
906		1487
907	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)	1488	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
908		1489
909	Makes a regex match against the regex object C<$accept> and returns	1490	Makes a regex match against the regex object C<$accept> and returns
910	everything up to and including the match.	1491	everything up to and including the match.
…		…
928	the receive buffer when neither C<$accept> nor C<$reject> match,	1509	the receive buffer when neither C<$accept> nor C<$reject> match,
929	and everything preceding and including the match will be accepted	1510	and everything preceding and including the match will be accepted
930	unconditionally. This is useful to skip large amounts of data that you	1511	unconditionally. This is useful to skip large amounts of data that you
931	know cannot be matched, so that the C<$accept> or C<$reject> regex do not	1512	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
932	have to start matching from the beginning. This is purely an optimisation	1513	have to start matching from the beginning. This is purely an optimisation
933	and is usually worth only when you expect more than a few kilobytes.	1514	and is usually worth it only when you expect more than a few kilobytes.
934		1515
935	Example: expect a http header, which ends at C<\015\012\015\012>. Since we	1516	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
936	expect the header to be very large (it isn't in practise, but...), we use	1517	expect the header to be very large (it isn't in practice, but...), we use
937	a skip regex to skip initial portions. The skip regex is tricky in that	1518	a skip regex to skip initial portions. The skip regex is tricky in that
938	it only accepts something not ending in either \015 or \012, as these are	1519	it only accepts something not ending in either \015 or \012, as these are
939	required for the accept regex.	1520	required for the accept regex.
940		1521
941	$handle->push_read (regex =>	1522	$handle->push_read (regex =>
…		…
960	return 1;	1541	return 1;
961	}	1542	}
962		1543
963	# reject	1544	# reject
964	if ($reject && $$rbuf =~ $reject) {	1545	if ($reject && $$rbuf =~ $reject) {
965	$self->_error (&Errno::EBADMSG);	1546	$self->_error (Errno::EBADMSG);
966	}	1547	}
967		1548
968	# skip	1549	# skip
969	if ($skip && $$rbuf =~ $skip) {	1550	if ($skip && $$rbuf =~ $skip) {
970	$data .= substr $$rbuf, 0, $+[0], "";	1551	$data .= substr $$rbuf, 0, $+[0], "";
…		…
986	my ($self, $cb) = @_;	1567	my ($self, $cb) = @_;
987		1568
988	sub {	1569	sub {
989	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1570	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
990	if ($_[0]{rbuf} =~ /[^0-9]/) {	1571	if ($_[0]{rbuf} =~ /[^0-9]/) {
991	$self->_error (&Errno::EBADMSG);	1572	$self->_error (Errno::EBADMSG);
992	}	1573	}
993	return;	1574	return;
994	}	1575	}
995		1576
996	my $len = $1;	1577	my $len = $1;
…		…
999	my $string = $_[1];	1580	my $string = $_[1];
1000	$_[0]->unshift_read (chunk => 1, sub {	1581	$_[0]->unshift_read (chunk => 1, sub {
1001	if ($_[1] eq ",") {	1582	if ($_[1] eq ",") {
1002	$cb->($_[0], $string);	1583	$cb->($_[0], $string);
1003	} else {	1584	} else {
1004	$self->_error (&Errno::EBADMSG);	1585	$self->_error (Errno::EBADMSG);
1005	}	1586	}
1006	});	1587	});
1007	});	1588	});
1008		1589
1009	1	1590	1
…		…
1015	An octet string prefixed with an encoded length. The encoding C<$format>	1596	An octet string prefixed with an encoded length. The encoding C<$format>
1016	uses the same format as a Perl C<pack> format, but must specify a single	1597	uses the same format as a Perl C<pack> format, but must specify a single
1017	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an	1598	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
1018	optional C<!>, C<< < >> or C<< > >> modifier).	1599	optional C<!>, C<< < >> or C<< > >> modifier).
1019		1600
1020	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.	1601	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1602	EPP uses a prefix of C<N> (4 octtes).
1021		1603
1022	Example: read a block of data prefixed by its length in BER-encoded	1604	Example: read a block of data prefixed by its length in BER-encoded
1023	format (very efficient).	1605	format (very efficient).
1024		1606
1025	$handle->push_read (packstring => "w", sub {	1607	$handle->push_read (packstring => "w", sub {
…		…
1031	register_read_type packstring => sub {	1613	register_read_type packstring => sub {
1032	my ($self, $cb, $format) = @_;	1614	my ($self, $cb, $format) = @_;
1033		1615
1034	sub {	1616	sub {
1035	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1617	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1036	defined (my $len = eval { unpack $format, $_[0]->{rbuf} })	1618	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
1037	or return;	1619	or return;
1038		1620
		1621	$format = length pack $format, $len;
		1622
		1623	# bypass unshift if we already have the remaining chunk
		1624	if ($format + $len <= length $_[0]{rbuf}) {
		1625	my $data = substr $_[0]{rbuf}, $format, $len;
		1626	substr $_[0]{rbuf}, 0, $format + $len, "";
		1627	$cb->($_[0], $data);
		1628	} else {
1039	# remove prefix	1629	# remove prefix
1040	substr $_[0]->{rbuf}, 0, (length pack $format, $len), "";	1630	substr $_[0]{rbuf}, 0, $format, "";
1041		1631
1042	# read rest	1632	# read remaining chunk
1043	$_[0]->unshift_read (chunk => $len, $cb);	1633	$_[0]->unshift_read (chunk => $len, $cb);
		1634	}
1044		1635
1045	1	1636	1
1046	}	1637	}
1047	};	1638	};
1048		1639
1049	=item json => $cb->($handle, $hash_or_arrayref)	1640	=item json => $cb->($handle, $hash_or_arrayref)
1050		1641
1051	Reads a JSON object or array, decodes it and passes it to the callback.	1642	Reads a JSON object or array, decodes it and passes it to the
		1643	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1052		1644
1053	If a C<json> object was passed to the constructor, then that will be used	1645	If a C<json> object was passed to the constructor, then that will be used
1054	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1646	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1055		1647
1056	This read type uses the incremental parser available with JSON version	1648	This read type uses the incremental parser available with JSON version
…		…
1065	=cut	1657	=cut
1066		1658
1067	register_read_type json => sub {	1659	register_read_type json => sub {
1068	my ($self, $cb) = @_;	1660	my ($self, $cb) = @_;
1069		1661
1070	require JSON;	1662	my $json = $self->{json} ||= json_coder;
1071		1663
1072	my $data;	1664	my $data;
1073	my $rbuf = \$self->{rbuf};	1665	my $rbuf = \$self->{rbuf};
1074		1666
1075	my $json = $self->{json} ||= JSON->new->utf8;
1076
1077	sub {	1667	sub {
1078	my $ref = $json->incr_parse ($self->{rbuf});	1668	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1079		1669
1080	if ($ref) {	1670	if ($ref) {
1081	$self->{rbuf} = $json->incr_text;	1671	$self->{rbuf} = $json->incr_text;
1082	$json->incr_text = "";	1672	$json->incr_text = "";
1083	$cb->($self, $ref);	1673	$cb->($self, $ref);
1084		1674
1085	1	1675	1
		1676	} elsif ($@) {
		1677	# error case
		1678	$json->incr_skip;
		1679
		1680	$self->{rbuf} = $json->incr_text;
		1681	$json->incr_text = "";
		1682
		1683	$self->_error (Errno::EBADMSG);
		1684
		1685	()
1086	} else {	1686	} else {
1087	$self->{rbuf} = "";	1687	$self->{rbuf} = "";
		1688
1088	()	1689	()
1089	}	1690	}
1090	}	1691	}
1091	};	1692	};
1092		1693
…		…
1105		1706
1106	require Storable;	1707	require Storable;
1107		1708
1108	sub {	1709	sub {
1109	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1710	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1110	defined (my $len = eval { unpack "w", $_[0]->{rbuf} })	1711	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
1111	or return;	1712	or return;
1112		1713
		1714	my $format = length pack "w", $len;
		1715
		1716	# bypass unshift if we already have the remaining chunk
		1717	if ($format + $len <= length $_[0]{rbuf}) {
		1718	my $data = substr $_[0]{rbuf}, $format, $len;
		1719	substr $_[0]{rbuf}, 0, $format + $len, "";
		1720	$cb->($_[0], Storable::thaw ($data));
		1721	} else {
1113	# remove prefix	1722	# remove prefix
1114	substr $_[0]->{rbuf}, 0, (length pack "w", $len), "";	1723	substr $_[0]{rbuf}, 0, $format, "";
1115		1724
1116	# read rest	1725	# read remaining chunk
1117	$_[0]->unshift_read (chunk => $len, sub {	1726	$_[0]->unshift_read (chunk => $len, sub {
1118	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1727	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1119	$cb->($_[0], $ref);	1728	$cb->($_[0], $ref);
1120	} else {	1729	} else {
1121	$self->_error (&Errno::EBADMSG);	1730	$self->_error (Errno::EBADMSG);
		1731	}
1122	}	1732	});
1123	});	1733	}
		1734
		1735	1
1124	}	1736	}
1125	};	1737	};
1126		1738
1127	=back	1739	=back
1128		1740
1129	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1741	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1130		1742
1131	This function (not method) lets you add your own types to C<push_read>.	1743	Instead of one of the predefined types, you can also specify the name
		1744	of a package. AnyEvent will try to load the package and then expects to
		1745	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1746	progressively tries to load the parent package until it either finds the
		1747	function (good) or runs out of packages (bad).
1132		1748
1133	Whenever the given C<type> is used, C<push_read> will invoke the code	1749	Whenever this type is used, C<push_read> will invoke the function with the
1134	reference with the handle object, the callback and the remaining	1750	handle object, the original callback and the remaining arguments.
1135	arguments.
1136		1751
1137	The code reference is supposed to return a callback (usually a closure)	1752	The function is supposed to return a callback (usually a closure) that
1138	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1753	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1754	mentally treat the function as a "configurable read type to read callback"
		1755	converter.
1139		1756
1140	It should invoke the passed callback when it is done reading (remember to	1757	It should invoke the original callback when it is done reading (remember
1141	pass C<$handle> as first argument as all other callbacks do that).	1758	to pass C<$handle> as first argument as all other callbacks do that,
		1759	although there is no strict requirement on this).
1142		1760
1143	Note that this is a function, and all types registered this way will be
1144	global, so try to use unique names.
1145
1146	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1761	For examples, see the source of this module (F<perldoc -m
1147	search for C<register_read_type>)).	1762	AnyEvent::Handle>, search for C<register_read_type>)).
1148		1763
1149	=item $handle->stop_read	1764	=item $handle->stop_read
1150		1765
1151	=item $handle->start_read	1766	=item $handle->start_read
1152		1767
…		…
1158	Note that AnyEvent::Handle will automatically C<start_read> for you when	1773	Note that AnyEvent::Handle will automatically C<start_read> for you when
1159	you change the C<on_read> callback or push/unshift a read callback, and it	1774	you change the C<on_read> callback or push/unshift a read callback, and it
1160	will automatically C<stop_read> for you when neither C<on_read> is set nor	1775	will automatically C<stop_read> for you when neither C<on_read> is set nor
1161	there are any read requests in the queue.	1776	there are any read requests in the queue.
1162		1777
		1778	In older versions of this module (<= 5.3), these methods had no effect,
		1779	as TLS does not support half-duplex connections. In current versions they
		1780	work as expected, as this behaviour is required to avoid certain resource
		1781	attacks, where the program would be forced to read (and buffer) arbitrary
		1782	amounts of data before being able to send some data. The drawback is that
		1783	some readings of the the SSL/TLS specifications basically require this
		1784	attack to be working, as SSL/TLS implementations might stall sending data
		1785	during a rehandshake.
		1786
		1787	As a guideline, during the initial handshake, you should not stop reading,
		1788	and as a client, it might cause problems, depending on your applciation.
		1789
1163	=cut	1790	=cut
1164		1791
1165	sub stop_read {	1792	sub stop_read {
1166	my ($self) = @_;	1793	my ($self) = @_;
1167		1794
…		…
1169	}	1796	}
1170		1797
1171	sub start_read {	1798	sub start_read {
1172	my ($self) = @_;	1799	my ($self) = @_;
1173		1800
1174	unless ($self->{_rw} || $self->{_eof}) {	1801	unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
1175	Scalar::Util::weaken $self;	1802	Scalar::Util::weaken $self;
1176		1803
1177	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1804	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1178	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1805	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1179	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1806	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size}, length $$rbuf;
1180		1807
1181	if ($len > 0) {	1808	if ($len > 0) {
1182	$self->{_activity} = AnyEvent->now;	1809	$self->{_activity} = $self->{_ractivity} = AE::now;
1183		1810
1184	$self->{filter_r}	1811	if ($self->{tls}) {
1185	? $self->{filter_r}($self, $rbuf)	1812	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1186	: $self->{_in_drain} || $self->_drain_rbuf;	1813
		1814	&_dotls ($self);
		1815	} else {
		1816	$self->_drain_rbuf;
		1817	}
		1818
		1819	if ($len == $self->{read_size}) {
		1820	$self->{read_size} *= 2;
		1821	$self->{read_size} = $self->{max_read_size} || MAX_READ_SIZE
		1822	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		1823	}
1187		1824
1188	} elsif (defined $len) {	1825	} elsif (defined $len) {
1189	delete $self->{_rw};	1826	delete $self->{_rw};
1190	$self->{_eof} = 1;	1827	$self->{_eof} = 1;
1191	$self->_drain_rbuf unless $self->{_in_drain};	1828	$self->_drain_rbuf;
1192		1829
1193	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1830	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1194	return $self->_error ($!, 1);	1831	return $self->_error ($!, 1);
1195	}	1832	}
1196	});	1833	};
1197	}	1834	}
1198	}	1835	}
1199		1836
		1837	our $ERROR_SYSCALL;
		1838	our $ERROR_WANT_READ;
		1839
		1840	sub _tls_error {
		1841	my ($self, $err) = @_;
		1842
		1843	return $self->_error ($!, 1)
		1844	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1845
		1846	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1847
		1848	# reduce error string to look less scary
		1849	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1850
		1851	if ($self->{_on_starttls}) {
		1852	(delete $self->{_on_starttls})->($self, undef, $err);
		1853	&_freetls;
		1854	} else {
		1855	&_freetls;
		1856	$self->_error (Errno::EPROTO, 1, $err);
		1857	}
		1858	}
		1859
		1860	# poll the write BIO and send the data if applicable
		1861	# also decode read data if possible
		1862	# this is basiclaly our TLS state machine
		1863	# more efficient implementations are possible with openssl,
		1864	# but not with the buggy and incomplete Net::SSLeay.
1200	sub _dotls {	1865	sub _dotls {
1201	my ($self) = @_;	1866	my ($self) = @_;
1202		1867
1203	my $buf;	1868	my $tmp;
1204		1869
1205	if (length $self->{_tls_wbuf}) {	1870	if (length $self->{_tls_wbuf}) {
1206	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1871	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1207	substr $self->{_tls_wbuf}, 0, $len, "";	1872	substr $self->{_tls_wbuf}, 0, $tmp, "";
1208	}	1873	}
1209	}
1210		1874
		1875	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1876	return $self->_tls_error ($tmp)
		1877	if $tmp != $ERROR_WANT_READ
		1878	&& ($tmp != $ERROR_SYSCALL || $!);
		1879	}
		1880
		1881	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1882	unless (length $tmp) {
		1883	$self->{_on_starttls}
		1884	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		1885	&_freetls;
		1886
		1887	if ($self->{on_stoptls}) {
		1888	$self->{on_stoptls}($self);
		1889	return;
		1890	} else {
		1891	# let's treat SSL-eof as we treat normal EOF
		1892	delete $self->{_rw};
		1893	$self->{_eof} = 1;
		1894	}
		1895	}
		1896
		1897	$self->{_tls_rbuf} .= $tmp;
		1898	$self->_drain_rbuf;
		1899	$self->{tls} or return; # tls session might have gone away in callback
		1900	}
		1901
		1902	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
		1903	return $self->_tls_error ($tmp)
		1904	if $tmp != $ERROR_WANT_READ
		1905	&& ($tmp != $ERROR_SYSCALL || $!);
		1906
1211	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1907	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1212	$self->{wbuf} .= $buf;	1908	$self->{wbuf} .= $tmp;
1213	$self->_drain_wbuf;	1909	$self->_drain_wbuf;
		1910	$self->{tls} or return; # tls session might have gone away in callback
1214	}	1911	}
1215		1912
1216	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	1913	$self->{_on_starttls}
1217	if (length $buf) {	1914	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1218	$self->{rbuf} .= $buf;	1915	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1219	$self->_drain_rbuf unless $self->{_in_drain};
1220	} else {
1221	# let's treat SSL-eof as we treat normal EOF
1222	$self->{_eof} = 1;
1223	$self->_shutdown;
1224	return;
1225	}
1226	}
1227
1228	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
1229
1230	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1231	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1232	return $self->_error ($!, 1);
1233	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
1234	return $self->_error (&Errno::EIO, 1);
1235	}
1236
1237	# all others are fine for our purposes
1238	}
1239	}	1916	}
1240		1917
1241	=item $handle->starttls ($tls[, $tls_ctx])	1918	=item $handle->starttls ($tls[, $tls_ctx])
1242		1919
1243	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1920	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1244	object is created, you can also do that at a later time by calling	1921	object is created, you can also do that at a later time by calling
1245	C<starttls>.	1922	C<starttls>.
1246		1923
		1924	Starting TLS is currently an asynchronous operation - when you push some
		1925	write data and then call C<< ->starttls >> then TLS negotiation will start
		1926	immediately, after which the queued write data is then sent.
		1927
1247	The first argument is the same as the C<tls> constructor argument (either	1928	The first argument is the same as the C<tls> constructor argument (either
1248	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1929	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1249		1930
1250	The second argument is the optional C<Net::SSLeay::CTX> object that is	1931	The second argument is the optional C<AnyEvent::TLS> object that is used
1251	used when AnyEvent::Handle has to create its own TLS connection object.	1932	when AnyEvent::Handle has to create its own TLS connection object, or
		1933	a hash reference with C<< key => value >> pairs that will be used to
		1934	construct a new context.
1252		1935
1253	The TLS connection object will end up in C<< $handle->{tls} >> after this	1936	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1254	call and can be used or changed to your liking. Note that the handshake	1937	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1255	might have already started when this function returns.	1938	changed to your liking. Note that the handshake might have already started
		1939	when this function returns.
1256		1940
		1941	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		1942	handshakes on the same stream. It is best to not attempt to use the
		1943	stream after stopping TLS.
		1944
		1945	This method may invoke callbacks (and therefore the handle might be
		1946	destroyed after it returns).
		1947
1257	=cut	1948	=cut
		1949
		1950	our %TLS_CACHE; #TODO not yet documented, should we?
1258		1951
1259	sub starttls {	1952	sub starttls {
1260	my ($self, $ssl, $ctx) = @_;	1953	my ($self, $tls, $ctx) = @_;
1261		1954
1262	$self->stoptls;	1955	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1956	if $self->{tls};
1263		1957
1264	if ($ssl eq "accept") {	1958	$self->{tls} = $tls;
1265	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1959	$self->{tls_ctx} = $ctx if @_ > 2;
1266	Net::SSLeay::set_accept_state ($ssl);	1960
1267	} elsif ($ssl eq "connect") {	1961	return unless $self->{fh};
1268	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1962
1269	Net::SSLeay::set_connect_state ($ssl);	1963	require Net::SSLeay;
		1964
		1965	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		1966	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1967
		1968	$tls = delete $self->{tls};
		1969	$ctx = $self->{tls_ctx};
		1970
		1971	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1972
		1973	if ("HASH" eq ref $ctx) {
		1974	require AnyEvent::TLS;
		1975
		1976	if ($ctx->{cache}) {
		1977	my $key = $ctx+0;
		1978	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1979	} else {
		1980	$ctx = new AnyEvent::TLS %$ctx;
		1981	}
		1982	}
1270	}	1983
1271		1984	$self->{tls_ctx} = $ctx || TLS_CTX ();
1272	$self->{tls} = $ssl;	1985	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1273		1986
1274	# basically, this is deep magic (because SSL_read should have the same issues)	1987	# basically, this is deep magic (because SSL_read should have the same issues)
1275	# but the openssl maintainers basically said: "trust us, it just works".	1988	# but the openssl maintainers basically said: "trust us, it just works".
1276	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1989	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1277	# and mismaintained ssleay-module doesn't even offer them).	1990	# and mismaintained ssleay-module doesn't even offer them).
1278	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1991	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1992	#
		1993	# in short: this is a mess.
		1994	#
		1995	# note that we do not try to keep the length constant between writes as we are required to do.
		1996	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1997	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1998	# have identity issues in that area.
1279	Net::SSLeay::CTX_set_mode ($self->{tls},	1999	# Net::SSLeay::CTX_set_mode ($ssl,
1280	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	2000	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1281	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	2001	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		2002	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1282		2003
1283	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	2004	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1284	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	2005	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1285		2006
		2007	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		2008
1286	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	2009	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1287		2010
1288	$self->{filter_w} = sub {	2011	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1289	$_[0]{_tls_wbuf} .= ${$_[1]};	2012	if $self->{on_starttls};
1290	&_dotls;	2013
1291	};	2014	&_dotls; # need to trigger the initial handshake
1292	$self->{filter_r} = sub {	2015	$self->start_read; # make sure we actually do read
1293	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1294	&_dotls;
1295	};
1296	}	2016	}
1297		2017
1298	=item $handle->stoptls	2018	=item $handle->stoptls
1299		2019
1300	Destroys the SSL connection, if any. Partial read or write data will be	2020	Shuts down the SSL connection - this makes a proper EOF handshake by
1301	lost.	2021	sending a close notify to the other side, but since OpenSSL doesn't
		2022	support non-blocking shut downs, it is not guaranteed that you can re-use
		2023	the stream afterwards.
		2024
		2025	This method may invoke callbacks (and therefore the handle might be
		2026	destroyed after it returns).
1302		2027
1303	=cut	2028	=cut
1304		2029
1305	sub stoptls {	2030	sub stoptls {
1306	my ($self) = @_;	2031	my ($self) = @_;
1307		2032
1308	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	2033	if ($self->{tls} && $self->{fh}) {
		2034	Net::SSLeay::shutdown ($self->{tls});
1309		2035
1310	delete $self->{_rbio};	2036	&_dotls;
1311	delete $self->{_wbio};	2037
1312	delete $self->{_tls_wbuf};	2038	# # we don't give a shit. no, we do, but we can't. no...#d#
1313	delete $self->{filter_r};	2039	# # we, we... have to use openssl :/#d#
1314	delete $self->{filter_w};	2040	# &_freetls;#d#
		2041	}
1315	}	2042	}
		2043
		2044	sub _freetls {
		2045	my ($self) = @_;
		2046
		2047	return unless $self->{tls};
		2048
		2049	$self->{tls_ctx}->_put_session (delete $self->{tls})
		2050	if $self->{tls} > 0;
		2051
		2052	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
		2053	}
		2054
		2055	=item $handle->resettls
		2056
		2057	This rarely-used method simply resets and TLS state on the handle, usually
		2058	causing data loss.
		2059
		2060	One case where it may be useful is when you want to skip over the data in
		2061	the stream but you are not interested in interpreting it, so data loss is
		2062	no concern.
		2063
		2064	=cut
		2065
		2066	*resettls = \&_freetls;
1316		2067
1317	sub DESTROY {	2068	sub DESTROY {
1318	my $self = shift;	2069	my ($self) = @_;
1319		2070
1320	$self->stoptls;	2071	&_freetls;
1321		2072
1322	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	2073	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1323		2074
1324	if ($linger && length $self->{wbuf}) {	2075	if ($linger && length $self->{wbuf} && $self->{fh}) {
1325	my $fh = delete $self->{fh};	2076	my $fh = delete $self->{fh};
1326	my $wbuf = delete $self->{wbuf};	2077	my $wbuf = delete $self->{wbuf};
1327		2078
1328	my @linger;	2079	my @linger;
1329		2080
1330	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	2081	push @linger, AE::io $fh, 1, sub {
1331	my $len = syswrite $fh, $wbuf, length $wbuf;	2082	my $len = syswrite $fh, $wbuf, length $wbuf;
1332		2083
1333	if ($len > 0) {	2084	if ($len > 0) {
1334	substr $wbuf, 0, $len, "";	2085	substr $wbuf, 0, $len, "";
1335	} else {	2086	} elsif (defined $len || ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK)) {
1336	@linger = (); # end	2087	@linger = (); # end
1337	}	2088	}
		2089	};
		2090	push @linger, AE::timer $linger, 0, sub {
		2091	@linger = ();
		2092	};
		2093	}
		2094	}
		2095
		2096	=item $handle->destroy
		2097
		2098	Shuts down the handle object as much as possible - this call ensures that
		2099	no further callbacks will be invoked and as many resources as possible
		2100	will be freed. Any method you will call on the handle object after
		2101	destroying it in this way will be silently ignored (and it will return the
		2102	empty list).
		2103
		2104	Normally, you can just "forget" any references to an AnyEvent::Handle
		2105	object and it will simply shut down. This works in fatal error and EOF
		2106	callbacks, as well as code outside. It does I<NOT> work in a read or write
		2107	callback, so when you want to destroy the AnyEvent::Handle object from
		2108	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		2109	that case.
		2110
		2111	Destroying the handle object in this way has the advantage that callbacks
		2112	will be removed as well, so if those are the only reference holders (as
		2113	is common), then one doesn't need to do anything special to break any
		2114	reference cycles.
		2115
		2116	The handle might still linger in the background and write out remaining
		2117	data, as specified by the C<linger> option, however.
		2118
		2119	=cut
		2120
		2121	sub destroy {
		2122	my ($self) = @_;
		2123
		2124	$self->DESTROY;
		2125	%$self = ();
		2126	bless $self, "AnyEvent::Handle::destroyed";
		2127	}
		2128
		2129	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2130	#nop
		2131	}
		2132
		2133	=item $handle->destroyed
		2134
		2135	Returns false as long as the handle hasn't been destroyed by a call to C<<
		2136	->destroy >>, true otherwise.
		2137
		2138	Can be useful to decide whether the handle is still valid after some
		2139	callback possibly destroyed the handle. For example, C<< ->push_write >>,
		2140	C<< ->starttls >> and other methods can call user callbacks, which in turn
		2141	can destroy the handle, so work can be avoided by checking sometimes:
		2142
		2143	$hdl->starttls ("accept");
		2144	return if $hdl->destroyed;
		2145	$hdl->push_write (...
		2146
		2147	Note that the call to C<push_write> will silently be ignored if the handle
		2148	has been destroyed, so often you can just ignore the possibility of the
		2149	handle being destroyed.
		2150
		2151	=cut
		2152
		2153	sub destroyed { 0 }
		2154	sub AnyEvent::Handle::destroyed::destroyed { 1 }
		2155
		2156	=item AnyEvent::Handle::TLS_CTX
		2157
		2158	This function creates and returns the AnyEvent::TLS object used by default
		2159	for TLS mode.
		2160
		2161	The context is created by calling L<AnyEvent::TLS> without any arguments.
		2162
		2163	=cut
		2164
		2165	our $TLS_CTX;
		2166
		2167	sub TLS_CTX() {
		2168	$TLS_CTX ||= do {
		2169	require AnyEvent::TLS;
		2170
		2171	new AnyEvent::TLS
		2172	}
		2173	}
		2174
		2175	=back
		2176
		2177
		2178	=head1 NONFREQUENTLY ASKED QUESTIONS
		2179
		2180	=over 4
		2181
		2182	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		2183	still get further invocations!
		2184
		2185	That's because AnyEvent::Handle keeps a reference to itself when handling
		2186	read or write callbacks.
		2187
		2188	It is only safe to "forget" the reference inside EOF or error callbacks,
		2189	from within all other callbacks, you need to explicitly call the C<<
		2190	->destroy >> method.
		2191
		2192	=item Why is my C<on_eof> callback never called?
		2193
		2194	Probably because your C<on_error> callback is being called instead: When
		2195	you have outstanding requests in your read queue, then an EOF is
		2196	considered an error as you clearly expected some data.
		2197
		2198	To avoid this, make sure you have an empty read queue whenever your handle
		2199	is supposed to be "idle" (i.e. connection closes are O.K.). You cna set
		2200	an C<on_read> handler that simply pushes the first read requests in the
		2201	queue.
		2202
		2203	See also the next question, which explains this in a bit more detail.
		2204
		2205	=item How can I serve requests in a loop?
		2206
		2207	Most protocols consist of some setup phase (authentication for example)
		2208	followed by a request handling phase, where the server waits for requests
		2209	and handles them, in a loop.
		2210
		2211	There are two important variants: The first (traditional, better) variant
		2212	handles requests until the server gets some QUIT command, causing it to
		2213	close the connection first (highly desirable for a busy TCP server). A
		2214	client dropping the connection is an error, which means this variant can
		2215	detect an unexpected detection close.
		2216
		2217	To handle this case, always make sure you have a on-empty read queue, by
		2218	pushing the "read request start" handler on it:
		2219
		2220	# we assume a request starts with a single line
		2221	my @start_request; @start_request = (line => sub {
		2222	my ($hdl, $line) = @_;
		2223
		2224	... handle request
		2225
		2226	# push next request read, possibly from a nested callback
		2227	$hdl->push_read (@start_request);
		2228	});
		2229
		2230	# auth done, now go into request handling loop
		2231	# now push the first @start_request
		2232	$hdl->push_read (@start_request);
		2233
		2234	By always having an outstanding C<push_read>, the handle always expects
		2235	some data and raises the C<EPIPE> error when the connction is dropped
		2236	unexpectedly.
		2237
		2238	The second variant is a protocol where the client can drop the connection
		2239	at any time. For TCP, this means that the server machine may run out of
		2240	sockets easier, and in general, it means you cnanot distinguish a protocl
		2241	failure/client crash from a normal connection close. Nevertheless, these
		2242	kinds of protocols are common (and sometimes even the best solution to the
		2243	problem).
		2244
		2245	Having an outstanding read request at all times is possible if you ignore
		2246	C<EPIPE> errors, but this doesn't help with when the client drops the
		2247	connection during a request, which would still be an error.
		2248
		2249	A better solution is to push the initial request read in an C<on_read>
		2250	callback. This avoids an error, as when the server doesn't expect data
		2251	(i.e. is idly waiting for the next request, an EOF will not raise an
		2252	error, but simply result in an C<on_eof> callback. It is also a bit slower
		2253	and simpler:
		2254
		2255	# auth done, now go into request handling loop
		2256	$hdl->on_read (sub {
		2257	my ($hdl) = @_;
		2258
		2259	# called each time we receive data but the read queue is empty
		2260	# simply start read the request
		2261
		2262	$hdl->push_read (line => sub {
		2263	my ($hdl, $line) = @_;
		2264
		2265	... handle request
		2266
		2267	# do nothing special when the request has been handled, just
		2268	# let the request queue go empty.
1338	});	2269	});
1339	push @linger, AnyEvent->timer (after => $linger, cb => sub {
1340	@linger = ();
1341	});	2270	});
		2271
		2272	=item I get different callback invocations in TLS mode/Why can't I pause
		2273	reading?
		2274
		2275	Unlike, say, TCP, TLS connections do not consist of two independent
		2276	communication channels, one for each direction. Or put differently, the
		2277	read and write directions are not independent of each other: you cannot
		2278	write data unless you are also prepared to read, and vice versa.
		2279
		2280	This means that, in TLS mode, you might get C<on_error> or C<on_eof>
		2281	callback invocations when you are not expecting any read data - the reason
		2282	is that AnyEvent::Handle always reads in TLS mode.
		2283
		2284	During the connection, you have to make sure that you always have a
		2285	non-empty read-queue, or an C<on_read> watcher. At the end of the
		2286	connection (or when you no longer want to use it) you can call the
		2287	C<destroy> method.
		2288
		2289	=item How do I read data until the other side closes the connection?
		2290
		2291	If you just want to read your data into a perl scalar, the easiest way
		2292	to achieve this is by setting an C<on_read> callback that does nothing,
		2293	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		2294	will be in C<$_[0]{rbuf}>:
		2295
		2296	$handle->on_read (sub { });
		2297	$handle->on_eof (undef);
		2298	$handle->on_error (sub {
		2299	my $data = delete $_[0]{rbuf};
		2300	});
		2301
		2302	The reason to use C<on_error> is that TCP connections, due to latencies
		2303	and packets loss, might get closed quite violently with an error, when in
		2304	fact all data has been received.
		2305
		2306	It is usually better to use acknowledgements when transferring data,
		2307	to make sure the other side hasn't just died and you got the data
		2308	intact. This is also one reason why so many internet protocols have an
		2309	explicit QUIT command.
		2310
		2311	=item I don't want to destroy the handle too early - how do I wait until
		2312	all data has been written?
		2313
		2314	After writing your last bits of data, set the C<on_drain> callback
		2315	and destroy the handle in there - with the default setting of
		2316	C<low_water_mark> this will be called precisely when all data has been
		2317	written to the socket:
		2318
		2319	$handle->push_write (...);
		2320	$handle->on_drain (sub {
		2321	warn "all data submitted to the kernel\n";
		2322	undef $handle;
		2323	});
		2324
		2325	If you just want to queue some data and then signal EOF to the other side,
		2326	consider using C<< ->push_shutdown >> instead.
		2327
		2328	=item I want to contact a TLS/SSL server, I don't care about security.
		2329
		2330	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2331	connect to it and then create the AnyEvent::Handle with the C<tls>
		2332	parameter:
		2333
		2334	tcp_connect $host, $port, sub {
		2335	my ($fh) = @_;
		2336
		2337	my $handle = new AnyEvent::Handle
		2338	fh => $fh,
		2339	tls => "connect",
		2340	on_error => sub { ... };
		2341
		2342	$handle->push_write (...);
1342	}	2343	};
1343	}
1344		2344
1345	=item AnyEvent::Handle::TLS_CTX	2345	=item I want to contact a TLS/SSL server, I do care about security.
1346		2346
1347	This function creates and returns the Net::SSLeay::CTX object used by	2347	Then you should additionally enable certificate verification, including
1348	default for TLS mode.	2348	peername verification, if the protocol you use supports it (see
		2349	L<AnyEvent::TLS>, C<verify_peername>).
1349		2350
1350	The context is created like this:	2351	E.g. for HTTPS:
1351		2352
1352	Net::SSLeay::load_error_strings;	2353	tcp_connect $host, $port, sub {
1353	Net::SSLeay::SSLeay_add_ssl_algorithms;	2354	my ($fh) = @_;
1354	Net::SSLeay::randomize;
1355		2355
1356	my $CTX = Net::SSLeay::CTX_new;	2356	my $handle = new AnyEvent::Handle
		2357	fh => $fh,
		2358	peername => $host,
		2359	tls => "connect",
		2360	tls_ctx => { verify => 1, verify_peername => "https" },
		2361	...
1357		2362
1358	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL	2363	Note that you must specify the hostname you connected to (or whatever
		2364	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2365	peername verification will be done.
1359		2366
1360	=cut	2367	The above will use the system-dependent default set of trusted CA
		2368	certificates. If you want to check against a specific CA, add the
		2369	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
1361		2370
1362	our $TLS_CTX;	2371	tls_ctx => {
		2372	verify => 1,
		2373	verify_peername => "https",
		2374	ca_file => "my-ca-cert.pem",
		2375	},
1363		2376
1364	sub TLS_CTX() {	2377	=item I want to create a TLS/SSL server, how do I do that?
1365	$TLS_CTX || do {
1366	require Net::SSLeay;
1367		2378
1368	Net::SSLeay::load_error_strings ();	2379	Well, you first need to get a server certificate and key. You have
1369	Net::SSLeay::SSLeay_add_ssl_algorithms ();	2380	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
1370	Net::SSLeay::randomize ();	2381	self-signed certificate (cheap. check the search engine of your choice,
		2382	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2383	nice program for that purpose).
1371		2384
1372	$TLS_CTX = Net::SSLeay::CTX_new ();	2385	Then create a file with your private key (in PEM format, see
		2386	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2387	file should then look like this:
1373		2388
1374	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());	2389	-----BEGIN RSA PRIVATE KEY-----
		2390	...header data
		2391	... lots of base64'y-stuff
		2392	-----END RSA PRIVATE KEY-----
1375		2393
1376	$TLS_CTX	2394	-----BEGIN CERTIFICATE-----
1377	}	2395	... lots of base64'y-stuff
1378	}	2396	-----END CERTIFICATE-----
		2397
		2398	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2399	specify this file as C<cert_file>:
		2400
		2401	tcp_server undef, $port, sub {
		2402	my ($fh) = @_;
		2403
		2404	my $handle = new AnyEvent::Handle
		2405	fh => $fh,
		2406	tls => "accept",
		2407	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2408	...
		2409
		2410	When you have intermediate CA certificates that your clients might not
		2411	know about, just append them to the C<cert_file>.
1379		2412
1380	=back	2413	=back
		2414
1381		2415
1382	=head1 SUBCLASSING AnyEvent::Handle	2416	=head1 SUBCLASSING AnyEvent::Handle
1383		2417
1384	In many cases, you might want to subclass AnyEvent::Handle.	2418	In many cases, you might want to subclass AnyEvent::Handle.
1385		2419
…		…
1389	=over 4	2423	=over 4
1390		2424
1391	=item * all constructor arguments become object members.	2425	=item * all constructor arguments become object members.
1392		2426
1393	At least initially, when you pass a C<tls>-argument to the constructor it	2427	At least initially, when you pass a C<tls>-argument to the constructor it
1394	will end up in C<< $handle->{tls} >>. Those members might be changes or	2428	will end up in C<< $handle->{tls} >>. Those members might be changed or
1395	mutated later on (for example C<tls> will hold the TLS connection object).	2429	mutated later on (for example C<tls> will hold the TLS connection object).
1396		2430
1397	=item * other object member names are prefixed with an C<_>.	2431	=item * other object member names are prefixed with an C<_>.
1398		2432
1399	All object members not explicitly documented (internal use) are prefixed	2433	All object members not explicitly documented (internal use) are prefixed
…		…
1402		2436
1403	=item * all members not documented here and not prefixed with an underscore	2437	=item * all members not documented here and not prefixed with an underscore
1404	are free to use in subclasses.	2438	are free to use in subclasses.
1405		2439
1406	Of course, new versions of AnyEvent::Handle may introduce more "public"	2440	Of course, new versions of AnyEvent::Handle may introduce more "public"
1407	member variables, but thats just life, at least it is documented.	2441	member variables, but that's just life. At least it is documented.
1408		2442
1409	=back	2443	=back
1410		2444
1411	=head1 AUTHOR	2445	=head1 AUTHOR
1412		2446

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines