ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.91 by root, Wed Oct 1 07:40:39 2008 UTC vs.
Revision 1.185 by root, Thu Sep 3 19:48:27 2009 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.3;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	warn "got error $msg\n";
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	);
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	filehandles.
52	on sockets see L<AnyEvent::Util>.
53		37
54	The L<AnyEvent::Intro> tutorial contains some well-documented	38	The L<AnyEvent::Intro> tutorial contains some well-documented
55	AnyEvent::Handle examples.	39	AnyEvent::Handle examples.
56		40
57	In the following, when the documentation refers to of "bytes" then this	41	In the following, when the documentation refers to of "bytes" then this
58	means characters. As sysread and syswrite are used for all I/O, their	42	means characters. As sysread and syswrite are used for all I/O, their
59	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
60		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
		47
61	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
62	argument.	49	argument.
63		50
64	=head2 SIGPIPE is not handled by this module	51	=cut
65		52
66	SIGPIPE is not handled by this module, so one of the practical	53	package AnyEvent::Handle;
67	requirements of using it is to ignore SIGPIPE (C<$SIG{PIPE} =	54
68	'IGNORE'>). At least, this is highly recommend in a networked program: If	55	use Scalar::Util ();
69	you use AnyEvent::Handle in a filter program (like sort), exiting on	56	use List::Util ();
70	SIGPIPE is probably the right thing to do.	57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
71		79
72	=head1 METHODS	80	=head1 METHODS
73		81
74	=over 4	82	=over 4
75		83
76	=item B<new (%args)>	84	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
77		85
78	The constructor supports these arguments (all as key => value pairs).	86	The constructor supports these arguments (all as C<< key => value >> pairs).
79		87
80	=over 4	88	=over 4
81		89
82	=item fh => $filehandle [MANDATORY]	90	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
83		91
84	The filehandle this L<AnyEvent::Handle> object will operate on.	92	The filehandle this L<AnyEvent::Handle> object will operate on.
85
86	NOTE: The filehandle will be set to non-blocking mode (using	93	NOTE: The filehandle will be set to non-blocking mode (using
87	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in	94	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
88	that mode.	95	that mode.
89		96
		97	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		98
		99	Try to connect to the specified host and service (port), using
		100	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		101	default C<peername>.
		102
		103	You have to specify either this parameter, or C<fh>, above.
		104
		105	It is possible to push requests on the read and write queues, and modify
		106	properties of the stream, even while AnyEvent::Handle is connecting.
		107
		108	When this parameter is specified, then the C<on_prepare>,
		109	C<on_connect_error> and C<on_connect> callbacks will be called under the
		110	appropriate circumstances:
		111
		112	=over 4
		113
90	=item on_eof => $cb->($handle)	114	=item on_prepare => $cb->($handle)
91		115
92	Set the callback to be called when an end-of-file condition is detected,	116	This (rarely used) callback is called before a new connection is
93	i.e. in the case of a socket, when the other side has closed the	117	attempted, but after the file handle has been created. It could be used to
94	connection cleanly.	118	prepare the file handle with parameters required for the actual connect
		119	(as opposed to settings that can be changed when the connection is already
		120	established).
95		121
96	For sockets, this just means that the other side has stopped sending data,	122	The return value of this callback should be the connect timeout value in
97	you can still try to write data, and, in fact, one can return from the eof	123	seconds (or C<0>, or C<undef>, or the empty list, to indicate the default
98	callback and continue writing data, as only the read part has been shut	124	timeout is to be used).
99	down.
100		125
101	While not mandatory, it is I<highly> recommended to set an eof callback,	126	=item on_connect => $cb->($handle, $host, $port, $retry->())
102	otherwise you might end up with a closed socket while you are still
103	waiting for data.
104		127
105	If an EOF condition has been detected but no C<on_eof> callback has been	128	This callback is called when a connection has been successfully established.
106	set, then a fatal error will be raised with C<$!> set to <0>.
107		129
		130	The actual numeric host and port (the socket peername) are passed as
		131	parameters, together with a retry callback.
		132
		133	When, for some reason, the handle is not acceptable, then calling
		134	C<$retry> will continue with the next conenction target (in case of
		135	multi-homed hosts or SRV records there can be multiple connection
		136	endpoints). When it is called then the read and write queues, eof status,
		137	tls status and similar properties of the handle are being reset.
		138
		139	In most cases, ignoring the C<$retry> parameter is the way to go.
		140
		141	=item on_connect_error => $cb->($handle, $message)
		142
		143	This callback is called when the conenction could not be
		144	established. C<$!> will contain the relevant error code, and C<$message> a
		145	message describing it (usually the same as C<"$!">).
		146
		147	If this callback isn't specified, then C<on_error> will be called with a
		148	fatal error instead.
		149
		150	=back
		151
108	=item on_error => $cb->($handle, $fatal)	152	=item on_error => $cb->($handle, $fatal, $message)
109		153
110	This is the error callback, which is called when, well, some error	154	This is the error callback, which is called when, well, some error
111	occured, such as not being able to resolve the hostname, failure to	155	occured, such as not being able to resolve the hostname, failure to
112	connect or a read error.	156	connect or a read error.
113		157
114	Some errors are fatal (which is indicated by C<$fatal> being true). On	158	Some errors are fatal (which is indicated by C<$fatal> being true). On
115	fatal errors the handle object will be shut down and will not be usable	159	fatal errors the handle object will be destroyed (by a call to C<< ->
116	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal	160	destroy >>) after invoking the error callback (which means you are free to
117	errors are an EOF condition with active (but unsatisifable) read watchers	161	examine the handle object). Examples of fatal errors are an EOF condition
118	(C<EPIPE>) or I/O errors.	162	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		163	cases where the other side can close the connection at their will it is
		164	often easiest to not report C<EPIPE> errors in this callback.
		165
		166	AnyEvent::Handle tries to find an appropriate error code for you to check
		167	against, but in some cases (TLS errors), this does not work well. It is
		168	recommended to always output the C<$message> argument in human-readable
		169	error messages (it's usually the same as C<"$!">).
119		170
120	Non-fatal errors can be retried by simply returning, but it is recommended	171	Non-fatal errors can be retried by simply returning, but it is recommended
121	to simply ignore this parameter and instead abondon the handle object	172	to simply ignore this parameter and instead abondon the handle object
122	when this callback is invoked. Examples of non-fatal errors are timeouts	173	when this callback is invoked. Examples of non-fatal errors are timeouts
123	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).	174	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
124		175
125	On callback entrance, the value of C<$!> contains the operating system	176	On callback entrance, the value of C<$!> contains the operating system
126	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	177	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		178	C<EPROTO>).
127		179
128	While not mandatory, it is I<highly> recommended to set this callback, as	180	While not mandatory, it is I<highly> recommended to set this callback, as
129	you will not be notified of errors otherwise. The default simply calls	181	you will not be notified of errors otherwise. The default simply calls
130	C<croak>.	182	C<croak>.
131		183
…		…
135	and no read request is in the queue (unlike read queue callbacks, this	187	and no read request is in the queue (unlike read queue callbacks, this
136	callback will only be called when at least one octet of data is in the	188	callback will only be called when at least one octet of data is in the
137	read buffer).	189	read buffer).
138		190
139	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	191	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
140	method or access the C<$handle->{rbuf}> member directly.	192	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		193	must not enlarge or modify the read buffer, you can only remove data at
		194	the beginning from it.
141		195
142	When an EOF condition is detected then AnyEvent::Handle will first try to	196	When an EOF condition is detected then AnyEvent::Handle will first try to
143	feed all the remaining data to the queued callbacks and C<on_read> before	197	feed all the remaining data to the queued callbacks and C<on_read> before
144	calling the C<on_eof> callback. If no progress can be made, then a fatal	198	calling the C<on_eof> callback. If no progress can be made, then a fatal
145	error will be raised (with C<$!> set to C<EPIPE>).	199	error will be raised (with C<$!> set to C<EPIPE>).
		200
		201	Note that, unlike requests in the read queue, an C<on_read> callback
		202	doesn't mean you I<require> some data: if there is an EOF and there
		203	are outstanding read requests then an error will be flagged. With an
		204	C<on_read> callback, the C<on_eof> callback will be invoked.
		205
		206	=item on_eof => $cb->($handle)
		207
		208	Set the callback to be called when an end-of-file condition is detected,
		209	i.e. in the case of a socket, when the other side has closed the
		210	connection cleanly, and there are no outstanding read requests in the
		211	queue (if there are read requests, then an EOF counts as an unexpected
		212	connection close and will be flagged as an error).
		213
		214	For sockets, this just means that the other side has stopped sending data,
		215	you can still try to write data, and, in fact, one can return from the EOF
		216	callback and continue writing data, as only the read part has been shut
		217	down.
		218
		219	If an EOF condition has been detected but no C<on_eof> callback has been
		220	set, then a fatal error will be raised with C<$!> set to <0>.
146		221
147	=item on_drain => $cb->($handle)	222	=item on_drain => $cb->($handle)
148		223
149	This sets the callback that is called when the write buffer becomes empty	224	This sets the callback that is called when the write buffer becomes empty
150	(or when the callback is set and the buffer is empty already).	225	(or when the callback is set and the buffer is empty already).
…		…
157	memory and push it into the queue, but instead only read more data from	232	memory and push it into the queue, but instead only read more data from
158	the file when the write queue becomes empty.	233	the file when the write queue becomes empty.
159		234
160	=item timeout => $fractional_seconds	235	=item timeout => $fractional_seconds
161		236
		237	=item rtimeout => $fractional_seconds
		238
		239	=item wtimeout => $fractional_seconds
		240
162	If non-zero, then this enables an "inactivity" timeout: whenever this many	241	If non-zero, then these enables an "inactivity" timeout: whenever this
163	seconds pass without a successful read or write on the underlying file	242	many seconds pass without a successful read or write on the underlying
164	handle, the C<on_timeout> callback will be invoked (and if that one is	243	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
165	missing, a non-fatal C<ETIMEDOUT> error will be raised).	244	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		245	error will be raised).
		246
		247	There are three variants of the timeouts that work fully independent
		248	of each other, for both read and write, just read, and just write:
		249	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		250	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		251	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
166		252
167	Note that timeout processing is also active when you currently do not have	253	Note that timeout processing is also active when you currently do not have
168	any outstanding read or write requests: If you plan to keep the connection	254	any outstanding read or write requests: If you plan to keep the connection
169	idle then you should disable the timout temporarily or ignore the timeout	255	idle then you should disable the timout temporarily or ignore the timeout
170	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply	256	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
…		…
214	accomplishd by setting this option to a true value.	300	accomplishd by setting this option to a true value.
215		301
216	The default is your opertaing system's default behaviour (most likely	302	The default is your opertaing system's default behaviour (most likely
217	enabled), this option explicitly enables or disables it, if possible.	303	enabled), this option explicitly enables or disables it, if possible.
218		304
		305	=item keepalive => <boolean>
		306
		307	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		308	normally, TCP connections have no time-out once established, so TCP
		309	conenctions, once established, can stay alive forever even when the other
		310	side has long gone. TCP keepalives are a cheap way to take down long-lived
		311	TCP connections whent he other side becomes unreachable. While the default
		312	is OS-dependent, TCP keepalives usually kick in after around two hours,
		313	and, if the other side doesn't reply, take down the TCP connection some 10
		314	to 15 minutes later.
		315
		316	It is harmless to specify this option for file handles that do not support
		317	keepalives, and enabling it on connections that are potentially long-lived
		318	is usually a good idea.
		319
		320	=item oobinline => <boolean>
		321
		322	BSD majorly fucked up the implementation of TCP urgent data. The result
		323	is that almost no OS implements TCP according to the specs, and every OS
		324	implements it slightly differently.
		325
		326	If you want to handle TCP urgent data, then setting this flag (the default
		327	is enabled) gives you the most portable way of getting urgent data, by
		328	putting it into the stream.
		329
		330	Since BSD emulation of OOB data on top of TCP's urgent data can have
		331	security implications, AnyEvent::Handle sets this flag automatically
		332	unless explicitly specified. Note that setting this flag after
		333	establishing a connection I<may> be a bit too late (data loss could
		334	already have occured on BSD systems), but at least it will protect you
		335	from most attacks.
		336
219	=item read_size => <bytes>	337	=item read_size => <bytes>
220		338
221	The default read block size (the amount of bytes this module will	339	The default read block size (the amount of bytes this module will
222	try to read during each loop iteration, which affects memory	340	try to read during each loop iteration, which affects memory
223	requirements). Default: C<8192>.	341	requirements). Default: C<8192>.
…		…
240	write data and will install a watcher that will write this data to the	358	write data and will install a watcher that will write this data to the
241	socket. No errors will be reported (this mostly matches how the operating	359	socket. No errors will be reported (this mostly matches how the operating
242	system treats outstanding data at socket close time).	360	system treats outstanding data at socket close time).
243		361
244	This will not work for partial TLS data that could not be encoded	362	This will not work for partial TLS data that could not be encoded
245	yet. This data will be lost.	363	yet. This data will be lost. Calling the C<stoptls> method in time might
		364	help.
		365
		366	=item peername => $string
		367
		368	A string used to identify the remote site - usually the DNS hostname
		369	(I<not> IDN!) used to create the connection, rarely the IP address.
		370
		371	Apart from being useful in error messages, this string is also used in TLS
		372	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		373	verification will be skipped when C<peername> is not specified or
		374	C<undef>.
246		375
247	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	376	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
248		377
249	When this parameter is given, it enables TLS (SSL) mode, that means	378	When this parameter is given, it enables TLS (SSL) mode, that means
250	AnyEvent will start a TLS handshake as soon as the conenction has been	379	AnyEvent will start a TLS handshake as soon as the conenction has been
251	established and will transparently encrypt/decrypt data afterwards.	380	established and will transparently encrypt/decrypt data afterwards.
		381
		382	All TLS protocol errors will be signalled as C<EPROTO>, with an
		383	appropriate error message.
252		384
253	TLS mode requires Net::SSLeay to be installed (it will be loaded	385	TLS mode requires Net::SSLeay to be installed (it will be loaded
254	automatically when you try to create a TLS handle): this module doesn't	386	automatically when you try to create a TLS handle): this module doesn't
255	have a dependency on that module, so if your module requires it, you have	387	have a dependency on that module, so if your module requires it, you have
256	to add the dependency yourself.	388	to add the dependency yourself.
…		…
260	mode.	392	mode.
261		393
262	You can also provide your own TLS connection object, but you have	394	You can also provide your own TLS connection object, but you have
263	to make sure that you call either C<Net::SSLeay::set_connect_state>	395	to make sure that you call either C<Net::SSLeay::set_connect_state>
264	or C<Net::SSLeay::set_accept_state> on it before you pass it to	396	or C<Net::SSLeay::set_accept_state> on it before you pass it to
265	AnyEvent::Handle.	397	AnyEvent::Handle. Also, this module will take ownership of this connection
		398	object.
		399
		400	At some future point, AnyEvent::Handle might switch to another TLS
		401	implementation, then the option to use your own session object will go
		402	away.
		403
		404	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		405	passing in the wrong integer will lead to certain crash. This most often
		406	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		407	segmentation fault.
266		408
267	See the C<< ->starttls >> method for when need to start TLS negotiation later.	409	See the C<< ->starttls >> method for when need to start TLS negotiation later.
268		410
269	=item tls_ctx => $ssl_ctx	411	=item tls_ctx => $anyevent_tls
270		412
271	Use the given C<Net::SSLeay::CTX> object to create the new TLS connection	413	Use the given C<AnyEvent::TLS> object to create the new TLS connection
272	(unless a connection object was specified directly). If this parameter is	414	(unless a connection object was specified directly). If this parameter is
273	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	415	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
		416
		417	Instead of an object, you can also specify a hash reference with C<< key
		418	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		419	new TLS context object.
		420
		421	=item on_starttls => $cb->($handle, $success[, $error_message])
		422
		423	This callback will be invoked when the TLS/SSL handshake has finished. If
		424	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		425	(C<on_stoptls> will not be called in this case).
		426
		427	The session in C<< $handle->{tls} >> can still be examined in this
		428	callback, even when the handshake was not successful.
		429
		430	TLS handshake failures will not cause C<on_error> to be invoked when this
		431	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		432
		433	Without this callback, handshake failures lead to C<on_error> being
		434	called, as normal.
		435
		436	Note that you cannot call C<starttls> right again in this callback. If you
		437	need to do that, start an zero-second timer instead whose callback can
		438	then call C<< ->starttls >> again.
		439
		440	=item on_stoptls => $cb->($handle)
		441
		442	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		443	set, then it will be invoked after freeing the TLS session. If it is not,
		444	then a TLS shutdown condition will be treated like a normal EOF condition
		445	on the handle.
		446
		447	The session in C<< $handle->{tls} >> can still be examined in this
		448	callback.
		449
		450	This callback will only be called on TLS shutdowns, not when the
		451	underlying handle signals EOF.
274		452
275	=item json => JSON or JSON::XS object	453	=item json => JSON or JSON::XS object
276		454
277	This is the json coder object used by the C<json> read and write types.	455	This is the json coder object used by the C<json> read and write types.
278		456
…		…
281	texts.	459	texts.
282		460
283	Note that you are responsible to depend on the JSON module if you want to	461	Note that you are responsible to depend on the JSON module if you want to
284	use this functionality, as AnyEvent does not have a dependency itself.	462	use this functionality, as AnyEvent does not have a dependency itself.
285		463
286	=item filter_r => $cb
287
288	=item filter_w => $cb
289
290	These exist, but are undocumented at this time. (They are used internally
291	by the TLS code).
292
293	=back	464	=back
294		465
295	=cut	466	=cut
296		467
297	sub new {	468	sub new {
298	my $class = shift;	469	my $class = shift;
299
300	my $self = bless { @_ }, $class;	470	my $self = bless { @_ }, $class;
301		471
302	$self->{fh} or Carp::croak "mandatory argument fh is missing";	472	if ($self->{fh}) {
		473	$self->_start;
		474	return unless $self->{fh}; # could be gone by now
		475
		476	} elsif ($self->{connect}) {
		477	require AnyEvent::Socket;
		478
		479	$self->{peername} = $self->{connect}[0]
		480	unless exists $self->{peername};
		481
		482	$self->{_skip_drain_rbuf} = 1;
		483
		484	{
		485	Scalar::Util::weaken (my $self = $self);
		486
		487	$self->{_connect} =
		488	AnyEvent::Socket::tcp_connect (
		489	$self->{connect}[0],
		490	$self->{connect}[1],
		491	sub {
		492	my ($fh, $host, $port, $retry) = @_;
		493
		494	if ($fh) {
		495	$self->{fh} = $fh;
		496
		497	delete $self->{_skip_drain_rbuf};
		498	$self->_start;
		499
		500	$self->{on_connect}
		501	and $self->{on_connect}($self, $host, $port, sub {
		502	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		503	$self->{_skip_drain_rbuf} = 1;
		504	&$retry;
		505	});
		506
		507	} else {
		508	if ($self->{on_connect_error}) {
		509	$self->{on_connect_error}($self, "$!");
		510	$self->destroy;
		511	} else {
		512	$self->_error ($!, 1);
		513	}
		514	}
		515	},
		516	sub {
		517	local $self->{fh} = $_[0];
		518
		519	$self->{on_prepare}
		520	? $self->{on_prepare}->($self)
		521	: ()
		522	}
		523	);
		524	}
		525
		526	} else {
		527	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		528	}
		529
		530	$self
		531	}
		532
		533	sub _start {
		534	my ($self) = @_;
303		535
304	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	536	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
305		537
306	if ($self->{tls}) {	538	$self->{_activity} =
307	require Net::SSLeay;	539	$self->{_ractivity} =
		540	$self->{_wactivity} = AE::now;
		541
		542	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		543	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		544	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		545
		546	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		547	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		548
		549	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		550
308	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	551	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
309	}	552	if $self->{tls};
310		553
311	$self->{_activity} = AnyEvent->now;
312	$self->_timeout;
313
314	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	554	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
315	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
316		555
317	$self->start_read	556	$self->start_read
318	if $self->{on_read};	557	if $self->{on_read} || @{ $self->{_queue} };
319		558
320	$self	559	$self->_drain_wbuf;
321	}
322
323	sub _shutdown {
324	my ($self) = @_;
325
326	delete $self->{_tw};
327	delete $self->{_rw};
328	delete $self->{_ww};
329	delete $self->{fh};
330
331	$self->stoptls;
332
333	delete $self->{on_read};
334	delete $self->{_queue};
335	}	560	}
336		561
337	sub _error {	562	sub _error {
338	my ($self, $errno, $fatal) = @_;	563	my ($self, $errno, $fatal, $message) = @_;
339
340	$self->_shutdown
341	if $fatal;
342		564
343	$! = $errno;	565	$! = $errno;
		566	$message ||= "$!";
344		567
345	if ($self->{on_error}) {	568	if ($self->{on_error}) {
346	$self->{on_error}($self, $fatal);	569	$self->{on_error}($self, $fatal, $message);
347	} else {	570	$self->destroy if $fatal;
		571	} elsif ($self->{fh}) {
		572	$self->destroy;
348	Carp::croak "AnyEvent::Handle uncaught error: $!";	573	Carp::croak "AnyEvent::Handle uncaught error: $message";
349	}	574	}
350	}	575	}
351		576
352	=item $fh = $handle->fh	577	=item $fh = $handle->fh
353		578
…		…
377	$_[0]{on_eof} = $_[1];	602	$_[0]{on_eof} = $_[1];
378	}	603	}
379		604
380	=item $handle->on_timeout ($cb)	605	=item $handle->on_timeout ($cb)
381		606
382	Replace the current C<on_timeout> callback, or disables the callback (but	607	=item $handle->on_rtimeout ($cb)
383	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
384	argument and method.
385		608
386	=cut	609	=item $handle->on_wtimeout ($cb)
387		610
388	sub on_timeout {	611	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
389	$_[0]{on_timeout} = $_[1];	612	callback, or disables the callback (but not the timeout) if C<$cb> =
390	}	613	C<undef>. See the C<timeout> constructor argument and method.
		614
		615	=cut
		616
		617	# see below
391		618
392	=item $handle->autocork ($boolean)	619	=item $handle->autocork ($boolean)
393		620
394	Enables or disables the current autocork behaviour (see C<autocork>	621	Enables or disables the current autocork behaviour (see C<autocork>
395	constructor argument).	622	constructor argument). Changes will only take effect on the next write.
396		623
397	=cut	624	=cut
		625
		626	sub autocork {
		627	$_[0]{autocork} = $_[1];
		628	}
398		629
399	=item $handle->no_delay ($boolean)	630	=item $handle->no_delay ($boolean)
400		631
401	Enables or disables the C<no_delay> setting (see constructor argument of	632	Enables or disables the C<no_delay> setting (see constructor argument of
402	the same name for details).	633	the same name for details).
…		…
406	sub no_delay {	637	sub no_delay {
407	$_[0]{no_delay} = $_[1];	638	$_[0]{no_delay} = $_[1];
408		639
409	eval {	640	eval {
410	local $SIG{__DIE__};	641	local $SIG{__DIE__};
411	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	642	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		643	if $_[0]{fh};
412	};	644	};
413	}	645	}
414		646
		647	=item $handle->keepalive ($boolean)
		648
		649	Enables or disables the C<keepalive> setting (see constructor argument of
		650	the same name for details).
		651
		652	=cut
		653
		654	sub keepalive {
		655	$_[0]{keepalive} = $_[1];
		656
		657	eval {
		658	local $SIG{__DIE__};
		659	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		660	if $_[0]{fh};
		661	};
		662	}
		663
		664	=item $handle->oobinline ($boolean)
		665
		666	Enables or disables the C<oobinline> setting (see constructor argument of
		667	the same name for details).
		668
		669	=cut
		670
		671	sub oobinline {
		672	$_[0]{oobinline} = $_[1];
		673
		674	eval {
		675	local $SIG{__DIE__};
		676	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		677	if $_[0]{fh};
		678	};
		679	}
		680
		681	=item $handle->keepalive ($boolean)
		682
		683	Enables or disables the C<keepalive> setting (see constructor argument of
		684	the same name for details).
		685
		686	=cut
		687
		688	sub keepalive {
		689	$_[0]{keepalive} = $_[1];
		690
		691	eval {
		692	local $SIG{__DIE__};
		693	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		694	if $_[0]{fh};
		695	};
		696	}
		697
		698	=item $handle->on_starttls ($cb)
		699
		700	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		701
		702	=cut
		703
		704	sub on_starttls {
		705	$_[0]{on_starttls} = $_[1];
		706	}
		707
		708	=item $handle->on_stoptls ($cb)
		709
		710	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		711
		712	=cut
		713
		714	sub on_starttls {
		715	$_[0]{on_stoptls} = $_[1];
		716	}
		717
		718	=item $handle->rbuf_max ($max_octets)
		719
		720	Configures the C<rbuf_max> setting (C<undef> disables it).
		721
		722	=cut
		723
		724	sub rbuf_max {
		725	$_[0]{rbuf_max} = $_[1];
		726	}
		727
415	#############################################################################	728	#############################################################################
416		729
417	=item $handle->timeout ($seconds)	730	=item $handle->timeout ($seconds)
418		731
		732	=item $handle->rtimeout ($seconds)
		733
		734	=item $handle->wtimeout ($seconds)
		735
419	Configures (or disables) the inactivity timeout.	736	Configures (or disables) the inactivity timeout.
420		737
421	=cut	738	=item $handle->timeout_reset
422		739
423	sub timeout {	740	=item $handle->rtimeout_reset
		741
		742	=item $handle->wtimeout_reset
		743
		744	Reset the activity timeout, as if data was received or sent.
		745
		746	These methods are cheap to call.
		747
		748	=cut
		749
		750	for my $dir ("", "r", "w") {
		751	my $timeout = "${dir}timeout";
		752	my $tw = "_${dir}tw";
		753	my $on_timeout = "on_${dir}timeout";
		754	my $activity = "_${dir}activity";
		755	my $cb;
		756
		757	*$on_timeout = sub {
		758	$_[0]{$on_timeout} = $_[1];
		759	};
		760
		761	*$timeout = sub {
424	my ($self, $timeout) = @_;	762	my ($self, $new_value) = @_;
425		763
426	$self->{timeout} = $timeout;	764	$self->{$timeout} = $new_value;
427	$self->_timeout;	765	delete $self->{$tw}; &$cb;
428	}	766	};
429		767
		768	*{"${dir}timeout_reset"} = sub {
		769	$_[0]{$activity} = AE::now;
		770	};
		771
		772	# main workhorse:
430	# reset the timeout watcher, as neccessary	773	# reset the timeout watcher, as neccessary
431	# also check for time-outs	774	# also check for time-outs
432	sub _timeout {	775	$cb = sub {
433	my ($self) = @_;	776	my ($self) = @_;
434		777
435	if ($self->{timeout}) {	778	if ($self->{$timeout} && $self->{fh}) {
436	my $NOW = AnyEvent->now;	779	my $NOW = AE::now;
437		780
438	# when would the timeout trigger?	781	# when would the timeout trigger?
439	my $after = $self->{_activity} + $self->{timeout} - $NOW;	782	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
440		783
441	# now or in the past already?	784	# now or in the past already?
442	if ($after <= 0) {	785	if ($after <= 0) {
443	$self->{_activity} = $NOW;	786	$self->{$activity} = $NOW;
444		787
445	if ($self->{on_timeout}) {	788	if ($self->{$on_timeout}) {
446	$self->{on_timeout}($self);	789	$self->{$on_timeout}($self);
447	} else {	790	} else {
448	$self->_error (&Errno::ETIMEDOUT);	791	$self->_error (Errno::ETIMEDOUT);
		792	}
		793
		794	# callback could have changed timeout value, optimise
		795	return unless $self->{$timeout};
		796
		797	# calculate new after
		798	$after = $self->{$timeout};
449	}	799	}
450		800
451	# callback could have changed timeout value, optimise	801	Scalar::Util::weaken $self;
452	return unless $self->{timeout};	802	return unless $self; # ->error could have destroyed $self
453		803
454	# calculate new after	804	$self->{$tw} ||= AE::timer $after, 0, sub {
455	$after = $self->{timeout};	805	delete $self->{$tw};
		806	$cb->($self);
		807	};
		808	} else {
		809	delete $self->{$tw};
456	}	810	}
457
458	Scalar::Util::weaken $self;
459	return unless $self; # ->error could have destroyed $self
460
461	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
462	delete $self->{_tw};
463	$self->_timeout;
464	});
465	} else {
466	delete $self->{_tw};
467	}	811	}
468	}	812	}
469		813
470	#############################################################################	814	#############################################################################
471		815
…		…
495	my ($self, $cb) = @_;	839	my ($self, $cb) = @_;
496		840
497	$self->{on_drain} = $cb;	841	$self->{on_drain} = $cb;
498		842
499	$cb->($self)	843	$cb->($self)
500	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	844	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
501	}	845	}
502		846
503	=item $handle->push_write ($data)	847	=item $handle->push_write ($data)
504		848
505	Queues the given scalar to be written. You can push as much data as you	849	Queues the given scalar to be written. You can push as much data as you
…		…
516	Scalar::Util::weaken $self;	860	Scalar::Util::weaken $self;
517		861
518	my $cb = sub {	862	my $cb = sub {
519	my $len = syswrite $self->{fh}, $self->{wbuf};	863	my $len = syswrite $self->{fh}, $self->{wbuf};
520		864
521	if ($len >= 0) {	865	if (defined $len) {
522	substr $self->{wbuf}, 0, $len, "";	866	substr $self->{wbuf}, 0, $len, "";
523		867
524	$self->{_activity} = AnyEvent->now;	868	$self->{_activity} = $self->{_wactivity} = AE::now;
525		869
526	$self->{on_drain}($self)	870	$self->{on_drain}($self)
527	if $self->{low_water_mark} >= length $self->{wbuf}	871	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
528	&& $self->{on_drain};	872	&& $self->{on_drain};
529		873
530	delete $self->{_ww} unless length $self->{wbuf};	874	delete $self->{_ww} unless length $self->{wbuf};
531	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	875	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
532	$self->_error ($!, 1);	876	$self->_error ($!, 1);
…		…
535		879
536	# try to write data immediately	880	# try to write data immediately
537	$cb->() unless $self->{autocork};	881	$cb->() unless $self->{autocork};
538		882
539	# if still data left in wbuf, we need to poll	883	# if still data left in wbuf, we need to poll
540	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	884	$self->{_ww} = AE::io $self->{fh}, 1, $cb
541	if length $self->{wbuf};	885	if length $self->{wbuf};
542	};	886	};
543	}	887	}
544		888
545	our %WH;	889	our %WH;
546		890
		891	# deprecated
547	sub register_write_type($$) {	892	sub register_write_type($$) {
548	$WH{$_[0]} = $_[1];	893	$WH{$_[0]} = $_[1];
549	}	894	}
550		895
551	sub push_write {	896	sub push_write {
552	my $self = shift;	897	my $self = shift;
553		898
554	if (@_ > 1) {	899	if (@_ > 1) {
555	my $type = shift;	900	my $type = shift;
556		901
		902	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
557	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	903	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
558	->($self, @_);	904	->($self, @_);
559	}	905	}
560		906
561	if ($self->{filter_w}) {	907	if ($self->{tls}) {
562	$self->{filter_w}($self, \$_[0]);	908	$self->{_tls_wbuf} .= $_[0];
		909	&_dotls ($self) if $self->{fh};
563	} else {	910	} else {
564	$self->{wbuf} .= $_[0];	911	$self->{wbuf} .= $_[0];
565	$self->_drain_wbuf;	912	$self->_drain_wbuf if $self->{fh};
566	}	913	}
567	}	914	}
568		915
569	=item $handle->push_write (type => @args)	916	=item $handle->push_write (type => @args)
570		917
571	Instead of formatting your data yourself, you can also let this module do	918	Instead of formatting your data yourself, you can also let this module
572	the job by specifying a type and type-specific arguments.	919	do the job by specifying a type and type-specific arguments. You
		920	can also specify the (fully qualified) name of a package, in which
		921	case AnyEvent tries to load the package and then expects to find the
		922	C<anyevent_read_type> function inside (see "custom write types", below).
573		923
574	Predefined types are (if you have ideas for additional types, feel free to	924	Predefined types are (if you have ideas for additional types, feel free to
575	drop by and tell us):	925	drop by and tell us):
576		926
577	=over 4	927	=over 4
…		…
584	=cut	934	=cut
585		935
586	register_write_type netstring => sub {	936	register_write_type netstring => sub {
587	my ($self, $string) = @_;	937	my ($self, $string) = @_;
588		938
589	sprintf "%d:%s,", (length $string), $string	939	(length $string) . ":$string,"
590	};	940	};
591		941
592	=item packstring => $format, $data	942	=item packstring => $format, $data
593		943
594	An octet string prefixed with an encoded length. The encoding C<$format>	944	An octet string prefixed with an encoded length. The encoding C<$format>
…		…
634	Other languages could read single lines terminated by a newline and pass	984	Other languages could read single lines terminated by a newline and pass
635	this line into their JSON decoder of choice.	985	this line into their JSON decoder of choice.
636		986
637	=cut	987	=cut
638		988
		989	sub json_coder() {
		990	eval { require JSON::XS; JSON::XS->new->utf8 }
		991	|| do { require JSON; JSON->new->utf8 }
		992	}
		993
639	register_write_type json => sub {	994	register_write_type json => sub {
640	my ($self, $ref) = @_;	995	my ($self, $ref) = @_;
641		996
642	require JSON;	997	my $json = $self->{json} ||= json_coder;
643		998
644	$self->{json} ? $self->{json}->encode ($ref)	999	$json->encode ($ref)
645	: JSON::encode_json ($ref)
646	};	1000	};
647		1001
648	=item storable => $reference	1002	=item storable => $reference
649		1003
650	Freezes the given reference using L<Storable> and writes it to the	1004	Freezes the given reference using L<Storable> and writes it to the
…		…
660	pack "w/a*", Storable::nfreeze ($ref)	1014	pack "w/a*", Storable::nfreeze ($ref)
661	};	1015	};
662		1016
663	=back	1017	=back
664		1018
665	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1019	=item $handle->push_shutdown
666		1020
667	This function (not method) lets you add your own types to C<push_write>.	1021	Sometimes you know you want to close the socket after writing your data
		1022	before it was actually written. One way to do that is to replace your
		1023	C<on_drain> handler by a callback that shuts down the socket (and set
		1024	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1025	replaces the C<on_drain> callback with:
		1026
		1027	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		1028
		1029	This simply shuts down the write side and signals an EOF condition to the
		1030	the peer.
		1031
		1032	You can rely on the normal read queue and C<on_eof> handling
		1033	afterwards. This is the cleanest way to close a connection.
		1034
		1035	=cut
		1036
		1037	sub push_shutdown {
		1038	my ($self) = @_;
		1039
		1040	delete $self->{low_water_mark};
		1041	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1042	}
		1043
		1044	=item custom write types - Package::anyevent_write_type $handle, @args
		1045
		1046	Instead of one of the predefined types, you can also specify the name of
		1047	a package. AnyEvent will try to load the package and then expects to find
		1048	a function named C<anyevent_write_type> inside. If it isn't found, it
		1049	progressively tries to load the parent package until it either finds the
		1050	function (good) or runs out of packages (bad).
		1051
668	Whenever the given C<type> is used, C<push_write> will invoke the code	1052	Whenever the given C<type> is used, C<push_write> will the function with
669	reference with the handle object and the remaining arguments.	1053	the handle object and the remaining arguments.
670		1054
671	The code reference is supposed to return a single octet string that will	1055	The function is supposed to return a single octet string that will be
672	be appended to the write buffer.	1056	appended to the write buffer, so you cna mentally treat this function as a
		1057	"arguments to on-the-wire-format" converter.
673		1058
674	Note that this is a function, and all types registered this way will be	1059	Example: implement a custom write type C<join> that joins the remaining
675	global, so try to use unique names.	1060	arguments using the first one.
		1061
		1062	$handle->push_write (My::Type => " ", 1,2,3);
		1063
		1064	# uses the following package, which can be defined in the "My::Type" or in
		1065	# the "My" modules to be auto-loaded, or just about anywhere when the
		1066	# My::Type::anyevent_write_type is defined before invoking it.
		1067
		1068	package My::Type;
		1069
		1070	sub anyevent_write_type {
		1071	my ($handle, $delim, @args) = @_;
		1072
		1073	join $delim, @args
		1074	}
676		1075
677	=cut	1076	=cut
678		1077
679	#############################################################################	1078	#############################################################################
680		1079
…		…
762	=cut	1161	=cut
763		1162
764	sub _drain_rbuf {	1163	sub _drain_rbuf {
765	my ($self) = @_;	1164	my ($self) = @_;
766		1165
		1166	# avoid recursion
		1167	return if $self->{_skip_drain_rbuf};
767	local $self->{_in_drain} = 1;	1168	local $self->{_skip_drain_rbuf} = 1;
768
769	if (
770	defined $self->{rbuf_max}
771	&& $self->{rbuf_max} < length $self->{rbuf}
772	) {
773	$self->_error (&Errno::ENOSPC, 1), return;
774	}
775		1169
776	while () {	1170	while () {
		1171	# we need to use a separate tls read buffer, as we must not receive data while
		1172	# we are draining the buffer, and this can only happen with TLS.
		1173	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1174	if exists $self->{_tls_rbuf};
		1175
777	my $len = length $self->{rbuf};	1176	my $len = length $self->{rbuf};
778		1177
779	if (my $cb = shift @{ $self->{_queue} }) {	1178	if (my $cb = shift @{ $self->{_queue} }) {
780	unless ($cb->($self)) {	1179	unless ($cb->($self)) {
781	if ($self->{_eof}) {	1180	# no progress can be made
782	# no progress can be made (not enough data and no data forthcoming)	1181	# (not enough data and no data forthcoming)
783	$self->_error (&Errno::EPIPE, 1), return;	1182	$self->_error (Errno::EPIPE, 1), return
784	}	1183	if $self->{_eof};
785		1184
786	unshift @{ $self->{_queue} }, $cb;	1185	unshift @{ $self->{_queue} }, $cb;
787	last;	1186	last;
788	}	1187	}
789	} elsif ($self->{on_read}) {	1188	} elsif ($self->{on_read}) {
…		…
796	&& !@{ $self->{_queue} } # and the queue is still empty	1195	&& !@{ $self->{_queue} } # and the queue is still empty
797	&& $self->{on_read} # but we still have on_read	1196	&& $self->{on_read} # but we still have on_read
798	) {	1197	) {
799	# no further data will arrive	1198	# no further data will arrive
800	# so no progress can be made	1199	# so no progress can be made
801	$self->_error (&Errno::EPIPE, 1), return	1200	$self->_error (Errno::EPIPE, 1), return
802	if $self->{_eof};	1201	if $self->{_eof};
803		1202
804	last; # more data might arrive	1203	last; # more data might arrive
805	}	1204	}
806	} else {	1205	} else {
807	# read side becomes idle	1206	# read side becomes idle
808	delete $self->{_rw};	1207	delete $self->{_rw} unless $self->{tls};
809	last;	1208	last;
810	}	1209	}
811	}	1210	}
812		1211
813	if ($self->{_eof}) {	1212	if ($self->{_eof}) {
814	if ($self->{on_eof}) {	1213	$self->{on_eof}
815	$self->{on_eof}($self)	1214	? $self->{on_eof}($self)
816	} else {	1215	: $self->_error (0, 1, "Unexpected end-of-file");
817	$self->_error (0, 1);	1216
818	}	1217	return;
		1218	}
		1219
		1220	if (
		1221	defined $self->{rbuf_max}
		1222	&& $self->{rbuf_max} < length $self->{rbuf}
		1223	) {
		1224	$self->_error (Errno::ENOSPC, 1), return;
819	}	1225	}
820		1226
821	# may need to restart read watcher	1227	# may need to restart read watcher
822	unless ($self->{_rw}) {	1228	unless ($self->{_rw}) {
823	$self->start_read	1229	$self->start_read
…		…
835		1241
836	sub on_read {	1242	sub on_read {
837	my ($self, $cb) = @_;	1243	my ($self, $cb) = @_;
838		1244
839	$self->{on_read} = $cb;	1245	$self->{on_read} = $cb;
840	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1246	$self->_drain_rbuf if $cb;
841	}	1247	}
842		1248
843	=item $handle->rbuf	1249	=item $handle->rbuf
844		1250
845	Returns the read buffer (as a modifiable lvalue).	1251	Returns the read buffer (as a modifiable lvalue).
846		1252
847	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1253	You can access the read buffer directly as the C<< ->{rbuf} >>
848	you want.	1254	member, if you want. However, the only operation allowed on the
		1255	read buffer (apart from looking at it) is removing data from its
		1256	beginning. Otherwise modifying or appending to it is not allowed and will
		1257	lead to hard-to-track-down bugs.
849		1258
850	NOTE: The read buffer should only be used or modified if the C<on_read>,	1259	NOTE: The read buffer should only be used or modified if the C<on_read>,
851	C<push_read> or C<unshift_read> methods are used. The other read methods	1260	C<push_read> or C<unshift_read> methods are used. The other read methods
852	automatically manage the read buffer.	1261	automatically manage the read buffer.
853		1262
…		…
889	my $cb = pop;	1298	my $cb = pop;
890		1299
891	if (@_) {	1300	if (@_) {
892	my $type = shift;	1301	my $type = shift;
893		1302
		1303	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
894	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1304	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
895	->($self, $cb, @_);	1305	->($self, $cb, @_);
896	}	1306	}
897		1307
898	push @{ $self->{_queue} }, $cb;	1308	push @{ $self->{_queue} }, $cb;
899	$self->_drain_rbuf unless $self->{_in_drain};	1309	$self->_drain_rbuf;
900	}	1310	}
901		1311
902	sub unshift_read {	1312	sub unshift_read {
903	my $self = shift;	1313	my $self = shift;
904	my $cb = pop;	1314	my $cb = pop;
…		…
908		1318
909	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1319	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
910	->($self, $cb, @_);	1320	->($self, $cb, @_);
911	}	1321	}
912		1322
913
914	unshift @{ $self->{_queue} }, $cb;	1323	unshift @{ $self->{_queue} }, $cb;
915	$self->_drain_rbuf unless $self->{_in_drain};	1324	$self->_drain_rbuf;
916	}	1325	}
917		1326
918	=item $handle->push_read (type => @args, $cb)	1327	=item $handle->push_read (type => @args, $cb)
919		1328
920	=item $handle->unshift_read (type => @args, $cb)	1329	=item $handle->unshift_read (type => @args, $cb)
921		1330
922	Instead of providing a callback that parses the data itself you can chose	1331	Instead of providing a callback that parses the data itself you can chose
923	between a number of predefined parsing formats, for chunks of data, lines	1332	between a number of predefined parsing formats, for chunks of data, lines
924	etc.	1333	etc. You can also specify the (fully qualified) name of a package, in
		1334	which case AnyEvent tries to load the package and then expects to find the
		1335	C<anyevent_read_type> function inside (see "custom read types", below).
925		1336
926	Predefined types are (if you have ideas for additional types, feel free to	1337	Predefined types are (if you have ideas for additional types, feel free to
927	drop by and tell us):	1338	drop by and tell us):
928		1339
929	=over 4	1340	=over 4
…		…
1053	return 1;	1464	return 1;
1054	}	1465	}
1055		1466
1056	# reject	1467	# reject
1057	if ($reject && $$rbuf =~ $reject) {	1468	if ($reject && $$rbuf =~ $reject) {
1058	$self->_error (&Errno::EBADMSG);	1469	$self->_error (Errno::EBADMSG);
1059	}	1470	}
1060		1471
1061	# skip	1472	# skip
1062	if ($skip && $$rbuf =~ $skip) {	1473	if ($skip && $$rbuf =~ $skip) {
1063	$data .= substr $$rbuf, 0, $+[0], "";	1474	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1079	my ($self, $cb) = @_;	1490	my ($self, $cb) = @_;
1080		1491
1081	sub {	1492	sub {
1082	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1493	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1083	if ($_[0]{rbuf} =~ /[^0-9]/) {	1494	if ($_[0]{rbuf} =~ /[^0-9]/) {
1084	$self->_error (&Errno::EBADMSG);	1495	$self->_error (Errno::EBADMSG);
1085	}	1496	}
1086	return;	1497	return;
1087	}	1498	}
1088		1499
1089	my $len = $1;	1500	my $len = $1;
…		…
1092	my $string = $_[1];	1503	my $string = $_[1];
1093	$_[0]->unshift_read (chunk => 1, sub {	1504	$_[0]->unshift_read (chunk => 1, sub {
1094	if ($_[1] eq ",") {	1505	if ($_[1] eq ",") {
1095	$cb->($_[0], $string);	1506	$cb->($_[0], $string);
1096	} else {	1507	} else {
1097	$self->_error (&Errno::EBADMSG);	1508	$self->_error (Errno::EBADMSG);
1098	}	1509	}
1099	});	1510	});
1100	});	1511	});
1101		1512
1102	1	1513	1
…		…
1108	An octet string prefixed with an encoded length. The encoding C<$format>	1519	An octet string prefixed with an encoded length. The encoding C<$format>
1109	uses the same format as a Perl C<pack> format, but must specify a single	1520	uses the same format as a Perl C<pack> format, but must specify a single
1110	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an	1521	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
1111	optional C<!>, C<< < >> or C<< > >> modifier).	1522	optional C<!>, C<< < >> or C<< > >> modifier).
1112		1523
1113	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.	1524	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1525	EPP uses a prefix of C<N> (4 octtes).
1114		1526
1115	Example: read a block of data prefixed by its length in BER-encoded	1527	Example: read a block of data prefixed by its length in BER-encoded
1116	format (very efficient).	1528	format (very efficient).
1117		1529
1118	$handle->push_read (packstring => "w", sub {	1530	$handle->push_read (packstring => "w", sub {
…		…
1148	}	1560	}
1149	};	1561	};
1150		1562
1151	=item json => $cb->($handle, $hash_or_arrayref)	1563	=item json => $cb->($handle, $hash_or_arrayref)
1152		1564
1153	Reads a JSON object or array, decodes it and passes it to the callback.	1565	Reads a JSON object or array, decodes it and passes it to the
		1566	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1154		1567
1155	If a C<json> object was passed to the constructor, then that will be used	1568	If a C<json> object was passed to the constructor, then that will be used
1156	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1569	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1157		1570
1158	This read type uses the incremental parser available with JSON version	1571	This read type uses the incremental parser available with JSON version
…		…
1167	=cut	1580	=cut
1168		1581
1169	register_read_type json => sub {	1582	register_read_type json => sub {
1170	my ($self, $cb) = @_;	1583	my ($self, $cb) = @_;
1171		1584
1172	require JSON;	1585	my $json = $self->{json} ||= json_coder;
1173		1586
1174	my $data;	1587	my $data;
1175	my $rbuf = \$self->{rbuf};	1588	my $rbuf = \$self->{rbuf};
1176		1589
1177	my $json = $self->{json} ||= JSON->new->utf8;
1178
1179	sub {	1590	sub {
1180	my $ref = $json->incr_parse ($self->{rbuf});	1591	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1181		1592
1182	if ($ref) {	1593	if ($ref) {
1183	$self->{rbuf} = $json->incr_text;	1594	$self->{rbuf} = $json->incr_text;
1184	$json->incr_text = "";	1595	$json->incr_text = "";
1185	$cb->($self, $ref);	1596	$cb->($self, $ref);
1186		1597
1187	1	1598	1
		1599	} elsif ($@) {
		1600	# error case
		1601	$json->incr_skip;
		1602
		1603	$self->{rbuf} = $json->incr_text;
		1604	$json->incr_text = "";
		1605
		1606	$self->_error (Errno::EBADMSG);
		1607
		1608	()
1188	} else {	1609	} else {
1189	$self->{rbuf} = "";	1610	$self->{rbuf} = "";
		1611
1190	()	1612	()
1191	}	1613	}
1192	}	1614	}
1193	};	1615	};
1194		1616
…		…
1226	# read remaining chunk	1648	# read remaining chunk
1227	$_[0]->unshift_read (chunk => $len, sub {	1649	$_[0]->unshift_read (chunk => $len, sub {
1228	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1650	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1229	$cb->($_[0], $ref);	1651	$cb->($_[0], $ref);
1230	} else {	1652	} else {
1231	$self->_error (&Errno::EBADMSG);	1653	$self->_error (Errno::EBADMSG);
1232	}	1654	}
1233	});	1655	});
1234	}	1656	}
1235		1657
1236	1	1658	1
1237	}	1659	}
1238	};	1660	};
1239		1661
1240	=back	1662	=back
1241		1663
1242	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1664	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1243		1665
1244	This function (not method) lets you add your own types to C<push_read>.	1666	Instead of one of the predefined types, you can also specify the name
		1667	of a package. AnyEvent will try to load the package and then expects to
		1668	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1669	progressively tries to load the parent package until it either finds the
		1670	function (good) or runs out of packages (bad).
1245		1671
1246	Whenever the given C<type> is used, C<push_read> will invoke the code	1672	Whenever this type is used, C<push_read> will invoke the function with the
1247	reference with the handle object, the callback and the remaining	1673	handle object, the original callback and the remaining arguments.
1248	arguments.
1249		1674
1250	The code reference is supposed to return a callback (usually a closure)	1675	The function is supposed to return a callback (usually a closure) that
1251	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1676	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1677	mentally treat the function as a "configurable read type to read callback"
		1678	converter.
1252		1679
1253	It should invoke the passed callback when it is done reading (remember to	1680	It should invoke the original callback when it is done reading (remember
1254	pass C<$handle> as first argument as all other callbacks do that).	1681	to pass C<$handle> as first argument as all other callbacks do that,
		1682	although there is no strict requirement on this).
1255		1683
1256	Note that this is a function, and all types registered this way will be
1257	global, so try to use unique names.
1258
1259	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1684	For examples, see the source of this module (F<perldoc -m
1260	search for C<register_read_type>)).	1685	AnyEvent::Handle>, search for C<register_read_type>)).
1261		1686
1262	=item $handle->stop_read	1687	=item $handle->stop_read
1263		1688
1264	=item $handle->start_read	1689	=item $handle->start_read
1265		1690
…		…
1271	Note that AnyEvent::Handle will automatically C<start_read> for you when	1696	Note that AnyEvent::Handle will automatically C<start_read> for you when
1272	you change the C<on_read> callback or push/unshift a read callback, and it	1697	you change the C<on_read> callback or push/unshift a read callback, and it
1273	will automatically C<stop_read> for you when neither C<on_read> is set nor	1698	will automatically C<stop_read> for you when neither C<on_read> is set nor
1274	there are any read requests in the queue.	1699	there are any read requests in the queue.
1275		1700
		1701	These methods will have no effect when in TLS mode (as TLS doesn't support
		1702	half-duplex connections).
		1703
1276	=cut	1704	=cut
1277		1705
1278	sub stop_read {	1706	sub stop_read {
1279	my ($self) = @_;	1707	my ($self) = @_;
1280		1708
1281	delete $self->{_rw};	1709	delete $self->{_rw} unless $self->{tls};
1282	}	1710	}
1283		1711
1284	sub start_read {	1712	sub start_read {
1285	my ($self) = @_;	1713	my ($self) = @_;
1286		1714
1287	unless ($self->{_rw} || $self->{_eof}) {	1715	unless ($self->{_rw} || $self->{_eof}) {
1288	Scalar::Util::weaken $self;	1716	Scalar::Util::weaken $self;
1289		1717
1290	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1718	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1291	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1719	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1292	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1720	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
1293		1721
1294	if ($len > 0) {	1722	if ($len > 0) {
1295	$self->{_activity} = AnyEvent->now;	1723	$self->{_activity} = $self->{_ractivity} = AE::now;
1296		1724
1297	$self->{filter_r}	1725	if ($self->{tls}) {
1298	? $self->{filter_r}($self, $rbuf)	1726	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1299	: $self->{_in_drain} || $self->_drain_rbuf;	1727
		1728	&_dotls ($self);
		1729	} else {
		1730	$self->_drain_rbuf;
		1731	}
1300		1732
1301	} elsif (defined $len) {	1733	} elsif (defined $len) {
1302	delete $self->{_rw};	1734	delete $self->{_rw};
1303	$self->{_eof} = 1;	1735	$self->{_eof} = 1;
1304	$self->_drain_rbuf unless $self->{_in_drain};	1736	$self->_drain_rbuf;
1305		1737
1306	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1738	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1307	return $self->_error ($!, 1);	1739	return $self->_error ($!, 1);
1308	}	1740	}
1309	});	1741	};
1310	}	1742	}
1311	}	1743	}
1312		1744
		1745	our $ERROR_SYSCALL;
		1746	our $ERROR_WANT_READ;
		1747
		1748	sub _tls_error {
		1749	my ($self, $err) = @_;
		1750
		1751	return $self->_error ($!, 1)
		1752	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1753
		1754	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1755
		1756	# reduce error string to look less scary
		1757	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1758
		1759	if ($self->{_on_starttls}) {
		1760	(delete $self->{_on_starttls})->($self, undef, $err);
		1761	&_freetls;
		1762	} else {
		1763	&_freetls;
		1764	$self->_error (Errno::EPROTO, 1, $err);
		1765	}
		1766	}
		1767
		1768	# poll the write BIO and send the data if applicable
		1769	# also decode read data if possible
		1770	# this is basiclaly our TLS state machine
		1771	# more efficient implementations are possible with openssl,
		1772	# but not with the buggy and incomplete Net::SSLeay.
1313	sub _dotls {	1773	sub _dotls {
1314	my ($self) = @_;	1774	my ($self) = @_;
1315		1775
1316	my $buf;	1776	my $tmp;
1317		1777
1318	if (length $self->{_tls_wbuf}) {	1778	if (length $self->{_tls_wbuf}) {
1319	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1779	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1320	substr $self->{_tls_wbuf}, 0, $len, "";	1780	substr $self->{_tls_wbuf}, 0, $tmp, "";
1321	}	1781	}
1322	}
1323		1782
		1783	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1784	return $self->_tls_error ($tmp)
		1785	if $tmp != $ERROR_WANT_READ
		1786	&& ($tmp != $ERROR_SYSCALL || $!);
		1787	}
		1788
1324	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	1789	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
1325	unless (length $buf) {	1790	unless (length $tmp) {
		1791	$self->{_on_starttls}
		1792	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		1793	&_freetls;
		1794
		1795	if ($self->{on_stoptls}) {
		1796	$self->{on_stoptls}($self);
		1797	return;
		1798	} else {
1326	# let's treat SSL-eof as we treat normal EOF	1799	# let's treat SSL-eof as we treat normal EOF
1327	delete $self->{_rw};	1800	delete $self->{_rw};
1328	$self->{_eof} = 1;	1801	$self->{_eof} = 1;
		1802	}
1329	}	1803	}
1330		1804
1331	$self->{rbuf} .= $buf;	1805	$self->{_tls_rbuf} .= $tmp;
1332	$self->_drain_rbuf unless $self->{_in_drain};	1806	$self->_drain_rbuf;
1333
1334	$self->{tls} or return; # tls could have gone away	1807	$self->{tls} or return; # tls session might have gone away in callback
1335	}	1808	}
1336		1809
1337	my $err = Net::SSLeay::get_error ($self->{tls}, -1);	1810	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
1338
1339	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1340	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1341	return $self->_error ($!, 1);	1811	return $self->_tls_error ($tmp)
1342	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {	1812	if $tmp != $ERROR_WANT_READ
1343	return $self->_error (&Errno::EIO, 1);	1813	&& ($tmp != $ERROR_SYSCALL || $!);
1344	}
1345		1814
1346	# all others are fine for our purposes
1347	}
1348
1349	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1815	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1350	$self->{wbuf} .= $buf;	1816	$self->{wbuf} .= $tmp;
1351	$self->_drain_wbuf;	1817	$self->_drain_wbuf;
1352	}	1818	}
		1819
		1820	$self->{_on_starttls}
		1821	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
		1822	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1353	}	1823	}
1354		1824
1355	=item $handle->starttls ($tls[, $tls_ctx])	1825	=item $handle->starttls ($tls[, $tls_ctx])
1356		1826
1357	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1827	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1358	object is created, you can also do that at a later time by calling	1828	object is created, you can also do that at a later time by calling
1359	C<starttls>.	1829	C<starttls>.
1360		1830
		1831	Starting TLS is currently an asynchronous operation - when you push some
		1832	write data and then call C<< ->starttls >> then TLS negotiation will start
		1833	immediately, after which the queued write data is then sent.
		1834
1361	The first argument is the same as the C<tls> constructor argument (either	1835	The first argument is the same as the C<tls> constructor argument (either
1362	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1836	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1363		1837
1364	The second argument is the optional C<Net::SSLeay::CTX> object that is	1838	The second argument is the optional C<AnyEvent::TLS> object that is used
1365	used when AnyEvent::Handle has to create its own TLS connection object.	1839	when AnyEvent::Handle has to create its own TLS connection object, or
		1840	a hash reference with C<< key => value >> pairs that will be used to
		1841	construct a new context.
1366		1842
1367	The TLS connection object will end up in C<< $handle->{tls} >> after this	1843	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1368	call and can be used or changed to your liking. Note that the handshake	1844	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1369	might have already started when this function returns.	1845	changed to your liking. Note that the handshake might have already started
		1846	when this function returns.
1370		1847
		1848	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		1849	handshakes on the same stream. Best do not attempt to use the stream after
		1850	stopping TLS.
		1851
1371	=cut	1852	=cut
		1853
		1854	our %TLS_CACHE; #TODO not yet documented, should we?
1372		1855
1373	sub starttls {	1856	sub starttls {
1374	my ($self, $ssl, $ctx) = @_;	1857	my ($self, $tls, $ctx) = @_;
1375		1858
1376	$self->stoptls;	1859	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1860	if $self->{tls};
1377		1861
1378	if ($ssl eq "accept") {	1862	$self->{tls} = $tls;
1379	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1863	$self->{tls_ctx} = $ctx if @_ > 2;
1380	Net::SSLeay::set_accept_state ($ssl);	1864
1381	} elsif ($ssl eq "connect") {	1865	return unless $self->{fh};
1382	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1866
1383	Net::SSLeay::set_connect_state ($ssl);	1867	require Net::SSLeay;
		1868
		1869	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		1870	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1871
		1872	$tls = delete $self->{tls};
		1873	$ctx = $self->{tls_ctx};
		1874
		1875	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1876
		1877	if ("HASH" eq ref $ctx) {
		1878	require AnyEvent::TLS;
		1879
		1880	if ($ctx->{cache}) {
		1881	my $key = $ctx+0;
		1882	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1883	} else {
		1884	$ctx = new AnyEvent::TLS %$ctx;
		1885	}
		1886	}
1384	}	1887
1385		1888	$self->{tls_ctx} = $ctx || TLS_CTX ();
1386	$self->{tls} = $ssl;	1889	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1387		1890
1388	# basically, this is deep magic (because SSL_read should have the same issues)	1891	# basically, this is deep magic (because SSL_read should have the same issues)
1389	# but the openssl maintainers basically said: "trust us, it just works".	1892	# but the openssl maintainers basically said: "trust us, it just works".
1390	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1893	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1391	# and mismaintained ssleay-module doesn't even offer them).	1894	# and mismaintained ssleay-module doesn't even offer them).
1392	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1895	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
1393	#	1896	#
1394	# in short: this is a mess.	1897	# in short: this is a mess.
1395	#	1898	#
1396	# note that we do not try to kepe the length constant between writes as we are required to do.	1899	# note that we do not try to keep the length constant between writes as we are required to do.
1397	# we assume that most (but not all) of this insanity only applies to non-blocking cases,	1900	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
1398	# and we drive openssl fully in blocking mode here.	1901	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1902	# have identity issues in that area.
1399	Net::SSLeay::CTX_set_mode ($self->{tls},	1903	# Net::SSLeay::CTX_set_mode ($ssl,
1400	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1904	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1401	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1905	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1906	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1402		1907
1403	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1908	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1404	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1909	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1405		1910
		1911	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1912
1406	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1913	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1407		1914
1408	$self->{filter_w} = sub {	1915	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1409	$_[0]{_tls_wbuf} .= ${$_[1]};	1916	if $self->{on_starttls};
1410	&_dotls;
1411	};
1412	$self->{filter_r} = sub {
1413	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1414	&_dotls;
1415	};
1416		1917
1417	&_dotls; # need to trigger the initial negotiation exchange	1918	&_dotls; # need to trigger the initial handshake
		1919	$self->start_read; # make sure we actually do read
1418	}	1920	}
1419		1921
1420	=item $handle->stoptls	1922	=item $handle->stoptls
1421		1923
1422	Destroys the SSL connection, if any. Partial read or write data will be	1924	Shuts down the SSL connection - this makes a proper EOF handshake by
1423	lost.	1925	sending a close notify to the other side, but since OpenSSL doesn't
		1926	support non-blocking shut downs, it is not guarenteed that you can re-use
		1927	the stream afterwards.
1424		1928
1425	=cut	1929	=cut
1426		1930
1427	sub stoptls {	1931	sub stoptls {
1428	my ($self) = @_;	1932	my ($self) = @_;
1429		1933
1430	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1934	if ($self->{tls}) {
		1935	Net::SSLeay::shutdown ($self->{tls});
1431		1936
1432	delete $self->{_rbio};	1937	&_dotls;
1433	delete $self->{_wbio};	1938
1434	delete $self->{_tls_wbuf};	1939	# # we don't give a shit. no, we do, but we can't. no...#d#
1435	delete $self->{filter_r};	1940	# # we, we... have to use openssl :/#d#
1436	delete $self->{filter_w};	1941	# &_freetls;#d#
		1942	}
		1943	}
		1944
		1945	sub _freetls {
		1946	my ($self) = @_;
		1947
		1948	return unless $self->{tls};
		1949
		1950	$self->{tls_ctx}->_put_session (delete $self->{tls})
		1951	if $self->{tls} > 0;
		1952
		1953	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1437	}	1954	}
1438		1955
1439	sub DESTROY {	1956	sub DESTROY {
1440	my $self = shift;	1957	my ($self) = @_;
1441		1958
1442	$self->stoptls;	1959	&_freetls;
1443		1960
1444	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	1961	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1445		1962
1446	if ($linger && length $self->{wbuf}) {	1963	if ($linger && length $self->{wbuf} && $self->{fh}) {
1447	my $fh = delete $self->{fh};	1964	my $fh = delete $self->{fh};
1448	my $wbuf = delete $self->{wbuf};	1965	my $wbuf = delete $self->{wbuf};
1449		1966
1450	my @linger;	1967	my @linger;
1451		1968
1452	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	1969	push @linger, AE::io $fh, 1, sub {
1453	my $len = syswrite $fh, $wbuf, length $wbuf;	1970	my $len = syswrite $fh, $wbuf, length $wbuf;
1454		1971
1455	if ($len > 0) {	1972	if ($len > 0) {
1456	substr $wbuf, 0, $len, "";	1973	substr $wbuf, 0, $len, "";
1457	} else {	1974	} else {
1458	@linger = (); # end	1975	@linger = (); # end
1459	}	1976	}
1460	});	1977	};
1461	push @linger, AnyEvent->timer (after => $linger, cb => sub {	1978	push @linger, AE::timer $linger, 0, sub {
1462	@linger = ();	1979	@linger = ();
1463	});	1980	};
1464	}	1981	}
		1982	}
		1983
		1984	=item $handle->destroy
		1985
		1986	Shuts down the handle object as much as possible - this call ensures that
		1987	no further callbacks will be invoked and as many resources as possible
		1988	will be freed. Any method you will call on the handle object after
		1989	destroying it in this way will be silently ignored (and it will return the
		1990	empty list).
		1991
		1992	Normally, you can just "forget" any references to an AnyEvent::Handle
		1993	object and it will simply shut down. This works in fatal error and EOF
		1994	callbacks, as well as code outside. It does I<NOT> work in a read or write
		1995	callback, so when you want to destroy the AnyEvent::Handle object from
		1996	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		1997	that case.
		1998
		1999	Destroying the handle object in this way has the advantage that callbacks
		2000	will be removed as well, so if those are the only reference holders (as
		2001	is common), then one doesn't need to do anything special to break any
		2002	reference cycles.
		2003
		2004	The handle might still linger in the background and write out remaining
		2005	data, as specified by the C<linger> option, however.
		2006
		2007	=cut
		2008
		2009	sub destroy {
		2010	my ($self) = @_;
		2011
		2012	$self->DESTROY;
		2013	%$self = ();
		2014	bless $self, "AnyEvent::Handle::destroyed";
		2015	}
		2016
		2017	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2018	#nop
1465	}	2019	}
1466		2020
1467	=item AnyEvent::Handle::TLS_CTX	2021	=item AnyEvent::Handle::TLS_CTX
1468		2022
1469	This function creates and returns the Net::SSLeay::CTX object used by	2023	This function creates and returns the AnyEvent::TLS object used by default
1470	default for TLS mode.	2024	for TLS mode.
1471		2025
1472	The context is created like this:	2026	The context is created by calling L<AnyEvent::TLS> without any arguments.
1473
1474	Net::SSLeay::load_error_strings;
1475	Net::SSLeay::SSLeay_add_ssl_algorithms;
1476	Net::SSLeay::randomize;
1477
1478	my $CTX = Net::SSLeay::CTX_new;
1479
1480	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1481		2027
1482	=cut	2028	=cut
1483		2029
1484	our $TLS_CTX;	2030	our $TLS_CTX;
1485		2031
1486	sub TLS_CTX() {	2032	sub TLS_CTX() {
1487	$TLS_CTX || do {	2033	$TLS_CTX ||= do {
1488	require Net::SSLeay;	2034	require AnyEvent::TLS;
1489		2035
1490	Net::SSLeay::load_error_strings ();	2036	new AnyEvent::TLS
1491	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1492	Net::SSLeay::randomize ();
1493
1494	$TLS_CTX = Net::SSLeay::CTX_new ();
1495
1496	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1497
1498	$TLS_CTX
1499	}	2037	}
1500	}	2038	}
1501		2039
1502	=back	2040	=back
		2041
		2042
		2043	=head1 NONFREQUENTLY ASKED QUESTIONS
		2044
		2045	=over 4
		2046
		2047	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		2048	still get further invocations!
		2049
		2050	That's because AnyEvent::Handle keeps a reference to itself when handling
		2051	read or write callbacks.
		2052
		2053	It is only safe to "forget" the reference inside EOF or error callbacks,
		2054	from within all other callbacks, you need to explicitly call the C<<
		2055	->destroy >> method.
		2056
		2057	=item I get different callback invocations in TLS mode/Why can't I pause
		2058	reading?
		2059
		2060	Unlike, say, TCP, TLS connections do not consist of two independent
		2061	communication channels, one for each direction. Or put differently. The
		2062	read and write directions are not independent of each other: you cannot
		2063	write data unless you are also prepared to read, and vice versa.
		2064
		2065	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		2066	callback invocations when you are not expecting any read data - the reason
		2067	is that AnyEvent::Handle always reads in TLS mode.
		2068
		2069	During the connection, you have to make sure that you always have a
		2070	non-empty read-queue, or an C<on_read> watcher. At the end of the
		2071	connection (or when you no longer want to use it) you can call the
		2072	C<destroy> method.
		2073
		2074	=item How do I read data until the other side closes the connection?
		2075
		2076	If you just want to read your data into a perl scalar, the easiest way
		2077	to achieve this is by setting an C<on_read> callback that does nothing,
		2078	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		2079	will be in C<$_[0]{rbuf}>:
		2080
		2081	$handle->on_read (sub { });
		2082	$handle->on_eof (undef);
		2083	$handle->on_error (sub {
		2084	my $data = delete $_[0]{rbuf};
		2085	});
		2086
		2087	The reason to use C<on_error> is that TCP connections, due to latencies
		2088	and packets loss, might get closed quite violently with an error, when in
		2089	fact, all data has been received.
		2090
		2091	It is usually better to use acknowledgements when transferring data,
		2092	to make sure the other side hasn't just died and you got the data
		2093	intact. This is also one reason why so many internet protocols have an
		2094	explicit QUIT command.
		2095
		2096	=item I don't want to destroy the handle too early - how do I wait until
		2097	all data has been written?
		2098
		2099	After writing your last bits of data, set the C<on_drain> callback
		2100	and destroy the handle in there - with the default setting of
		2101	C<low_water_mark> this will be called precisely when all data has been
		2102	written to the socket:
		2103
		2104	$handle->push_write (...);
		2105	$handle->on_drain (sub {
		2106	warn "all data submitted to the kernel\n";
		2107	undef $handle;
		2108	});
		2109
		2110	If you just want to queue some data and then signal EOF to the other side,
		2111	consider using C<< ->push_shutdown >> instead.
		2112
		2113	=item I want to contact a TLS/SSL server, I don't care about security.
		2114
		2115	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2116	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		2117	parameter:
		2118
		2119	tcp_connect $host, $port, sub {
		2120	my ($fh) = @_;
		2121
		2122	my $handle = new AnyEvent::Handle
		2123	fh => $fh,
		2124	tls => "connect",
		2125	on_error => sub { ... };
		2126
		2127	$handle->push_write (...);
		2128	};
		2129
		2130	=item I want to contact a TLS/SSL server, I do care about security.
		2131
		2132	Then you should additionally enable certificate verification, including
		2133	peername verification, if the protocol you use supports it (see
		2134	L<AnyEvent::TLS>, C<verify_peername>).
		2135
		2136	E.g. for HTTPS:
		2137
		2138	tcp_connect $host, $port, sub {
		2139	my ($fh) = @_;
		2140
		2141	my $handle = new AnyEvent::Handle
		2142	fh => $fh,
		2143	peername => $host,
		2144	tls => "connect",
		2145	tls_ctx => { verify => 1, verify_peername => "https" },
		2146	...
		2147
		2148	Note that you must specify the hostname you connected to (or whatever
		2149	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2150	peername verification will be done.
		2151
		2152	The above will use the system-dependent default set of trusted CA
		2153	certificates. If you want to check against a specific CA, add the
		2154	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2155
		2156	tls_ctx => {
		2157	verify => 1,
		2158	verify_peername => "https",
		2159	ca_file => "my-ca-cert.pem",
		2160	},
		2161
		2162	=item I want to create a TLS/SSL server, how do I do that?
		2163
		2164	Well, you first need to get a server certificate and key. You have
		2165	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2166	self-signed certificate (cheap. check the search engine of your choice,
		2167	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2168	nice program for that purpose).
		2169
		2170	Then create a file with your private key (in PEM format, see
		2171	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2172	file should then look like this:
		2173
		2174	-----BEGIN RSA PRIVATE KEY-----
		2175	...header data
		2176	... lots of base64'y-stuff
		2177	-----END RSA PRIVATE KEY-----
		2178
		2179	-----BEGIN CERTIFICATE-----
		2180	... lots of base64'y-stuff
		2181	-----END CERTIFICATE-----
		2182
		2183	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2184	specify this file as C<cert_file>:
		2185
		2186	tcp_server undef, $port, sub {
		2187	my ($fh) = @_;
		2188
		2189	my $handle = new AnyEvent::Handle
		2190	fh => $fh,
		2191	tls => "accept",
		2192	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2193	...
		2194
		2195	When you have intermediate CA certificates that your clients might not
		2196	know about, just append them to the C<cert_file>.
		2197
		2198	=back
		2199
1503		2200
1504	=head1 SUBCLASSING AnyEvent::Handle	2201	=head1 SUBCLASSING AnyEvent::Handle
1505		2202
1506	In many cases, you might want to subclass AnyEvent::Handle.	2203	In many cases, you might want to subclass AnyEvent::Handle.
1507		2204

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines