[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.87 by root, Thu Aug 21 20:52:39 2008 UTC vs.
Revision 1.129 by root, Mon Jun 29 11:04:09 2009 UTC

…		…
14		14
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16		16
17	=cut	17	=cut
18		18
19	our $VERSION = 4.232;	19	our $VERSION = 4.42;
20		20
21	=head1 SYNOPSIS	21	=head1 SYNOPSIS
22		22
23	use AnyEvent;	23	use AnyEvent;
24	use AnyEvent::Handle;	24	use AnyEvent::Handle;
…		…
27		27
28	my $handle =	28	my $handle =
29	AnyEvent::Handle->new (	29	AnyEvent::Handle->new (
30	fh => \*STDIN,	30	fh => \*STDIN,
31	on_eof => sub {	31	on_eof => sub {
32	$cv->broadcast;	32	$cv->send;
33	},	33	},
34	);	34	);
35		35
36	# send some request line	36	# send some request line
37	$handle->push_write ("getinfo\015\012");	37	$handle->push_write ("getinfo\015\012");
…		…
84	Set the callback to be called when an end-of-file condition is detected,	84	Set the callback to be called when an end-of-file condition is detected,
85	i.e. in the case of a socket, when the other side has closed the	85	i.e. in the case of a socket, when the other side has closed the
86	connection cleanly.	86	connection cleanly.
87		87
88	For sockets, this just means that the other side has stopped sending data,	88	For sockets, this just means that the other side has stopped sending data,
89	you can still try to write data, and, in fact, one can return from the eof	89	you can still try to write data, and, in fact, one can return from the EOF
90	callback and continue writing data, as only the read part has been shut	90	callback and continue writing data, as only the read part has been shut
91	down.	91	down.
92		92
93	While not mandatory, it is I<highly> recommended to set an eof callback,	93	While not mandatory, it is I<highly> recommended to set an EOF callback,
94	otherwise you might end up with a closed socket while you are still	94	otherwise you might end up with a closed socket while you are still
95	waiting for data.	95	waiting for data.
96		96
97	If an EOF condition has been detected but no C<on_eof> callback has been	97	If an EOF condition has been detected but no C<on_eof> callback has been
98	set, then a fatal error will be raised with C<$!> set to <0>.	98	set, then a fatal error will be raised with C<$!> set to <0>.
…		…
103	occured, such as not being able to resolve the hostname, failure to	103	occured, such as not being able to resolve the hostname, failure to
104	connect or a read error.	104	connect or a read error.
105		105
106	Some errors are fatal (which is indicated by C<$fatal> being true). On	106	Some errors are fatal (which is indicated by C<$fatal> being true). On
107	fatal errors the handle object will be shut down and will not be usable	107	fatal errors the handle object will be shut down and will not be usable
108	(but you are free to look at the current C< ->rbuf >). Examples of fatal	108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal
109	errors are an EOF condition with active (but unsatisifable) read watchers	109	errors are an EOF condition with active (but unsatisifable) read watchers
110	(C<EPIPE>) or I/O errors.	110	(C<EPIPE>) or I/O errors.
111		111
112	Non-fatal errors can be retried by simply returning, but it is recommended	112	Non-fatal errors can be retried by simply returning, but it is recommended
113	to simply ignore this parameter and instead abondon the handle object	113	to simply ignore this parameter and instead abondon the handle object
…		…
127	and no read request is in the queue (unlike read queue callbacks, this	127	and no read request is in the queue (unlike read queue callbacks, this
128	callback will only be called when at least one octet of data is in the	128	callback will only be called when at least one octet of data is in the
129	read buffer).	129	read buffer).
130		130
131	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	131	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
132	method or access the C<$handle->{rbuf}> member directly.	132	method or access the C<$handle->{rbuf}> member directly. Note that you
		133	must not enlarge or modify the read buffer, you can only remove data at
		134	the beginning from it.
133		135
134	When an EOF condition is detected then AnyEvent::Handle will first try to	136	When an EOF condition is detected then AnyEvent::Handle will first try to
135	feed all the remaining data to the queued callbacks and C<on_read> before	137	feed all the remaining data to the queued callbacks and C<on_read> before
136	calling the C<on_eof> callback. If no progress can be made, then a fatal	138	calling the C<on_eof> callback. If no progress can be made, then a fatal
137	error will be raised (with C<$!> set to C<EPIPE>).	139	error will be raised (with C<$!> set to C<EPIPE>).
…		…
152	=item timeout => $fractional_seconds	154	=item timeout => $fractional_seconds
153		155
154	If non-zero, then this enables an "inactivity" timeout: whenever this many	156	If non-zero, then this enables an "inactivity" timeout: whenever this many
155	seconds pass without a successful read or write on the underlying file	157	seconds pass without a successful read or write on the underlying file
156	handle, the C<on_timeout> callback will be invoked (and if that one is	158	handle, the C<on_timeout> callback will be invoked (and if that one is
157	missing, an C<ETIMEDOUT> error will be raised).	159	missing, a non-fatal C<ETIMEDOUT> error will be raised).
158		160
159	Note that timeout processing is also active when you currently do not have	161	Note that timeout processing is also active when you currently do not have
160	any outstanding read or write requests: If you plan to keep the connection	162	any outstanding read or write requests: If you plan to keep the connection
161	idle then you should disable the timout temporarily or ignore the timeout	163	idle then you should disable the timout temporarily or ignore the timeout
162	in the C<on_timeout> callback.	164	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		165	restart the timeout.
163		166
164	Zero (the default) disables this timeout.	167	Zero (the default) disables this timeout.
165		168
166	=item on_timeout => $cb->($handle)	169	=item on_timeout => $cb->($handle)
167		170
…		…
171		174
172	=item rbuf_max => <bytes>	175	=item rbuf_max => <bytes>
173		176
174	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	177	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
175	when the read buffer ever (strictly) exceeds this size. This is useful to	178	when the read buffer ever (strictly) exceeds this size. This is useful to
176	avoid denial-of-service attacks.	179	avoid some forms of denial-of-service attacks.
177		180
178	For example, a server accepting connections from untrusted sources should	181	For example, a server accepting connections from untrusted sources should
179	be configured to accept only so-and-so much data that it cannot act on	182	be configured to accept only so-and-so much data that it cannot act on
180	(for example, when expecting a line, an attacker could send an unlimited	183	(for example, when expecting a line, an attacker could send an unlimited
181	amount of data without a callback ever being called as long as the line	184	amount of data without a callback ever being called as long as the line
182	isn't finished).	185	isn't finished).
183		186
184	=item autocork => <boolean>	187	=item autocork => <boolean>
185		188
186	When disabled (the default), then C<push_write> will try to immediately	189	When disabled (the default), then C<push_write> will try to immediately
187	write the data to the handle if possible. This avoids having to register	190	write the data to the handle, if possible. This avoids having to register
188	a write watcher and wait for the next event loop iteration, but can be	191	a write watcher and wait for the next event loop iteration, but can
189	inefficient if you write multiple small chunks (this disadvantage is	192	be inefficient if you write multiple small chunks (on the wire, this
190	usually avoided by your kernel's nagle algorithm, see C<low_delay>).	193	disadvantage is usually avoided by your kernel's nagle algorithm, see
		194	C<no_delay>, but this option can save costly syscalls).
191		195
192	When enabled, then writes will always be queued till the next event loop	196	When enabled, then writes will always be queued till the next event loop
193	iteration. This is efficient when you do many small writes per iteration,	197	iteration. This is efficient when you do many small writes per iteration,
194	but less efficient when you do a single write only.	198	but less efficient when you do a single write only per iteration (or when
		199	the write buffer often is full). It also increases write latency.
195		200
196	=item no_delay => <boolean>	201	=item no_delay => <boolean>
197		202
198	When doing small writes on sockets, your operating system kernel might	203	When doing small writes on sockets, your operating system kernel might
199	wait a bit for more data before actually sending it out. This is called	204	wait a bit for more data before actually sending it out. This is called
200	the Nagle algorithm, and usually it is beneficial.	205	the Nagle algorithm, and usually it is beneficial.
201		206
202	In some situations you want as low a delay as possible, which cna be	207	In some situations you want as low a delay as possible, which can be
203	accomplishd by setting this option to true.	208	accomplishd by setting this option to a true value.
204		209
205	The default is your opertaing system's default behaviour, this option	210	The default is your opertaing system's default behaviour (most likely
206	explicitly enables or disables it, if possible.	211	enabled), this option explicitly enables or disables it, if possible.
207		212
208	=item read_size => <bytes>	213	=item read_size => <bytes>
209		214
210	The default read block size (the amount of bytes this module will try to read	215	The default read block size (the amount of bytes this module will
211	during each (loop iteration). Default: C<8192>.	216	try to read during each loop iteration, which affects memory
		217	requirements). Default: C<8192>.
212		218
213	=item low_water_mark => <bytes>	219	=item low_water_mark => <bytes>
214		220
215	Sets the amount of bytes (default: C<0>) that make up an "empty" write	221	Sets the amount of bytes (default: C<0>) that make up an "empty" write
216	buffer: If the write reaches this size or gets even samller it is	222	buffer: If the write reaches this size or gets even samller it is
217	considered empty.	223	considered empty.
218		224
		225	Sometimes it can be beneficial (for performance reasons) to add data to
		226	the write buffer before it is fully drained, but this is a rare case, as
		227	the operating system kernel usually buffers data as well, so the default
		228	is good in almost all cases.
		229
219	=item linger => <seconds>	230	=item linger => <seconds>
220		231
221	If non-zero (default: C<3600>), then the destructor of the	232	If non-zero (default: C<3600>), then the destructor of the
222	AnyEvent::Handle object will check wether there is still outstanding write	233	AnyEvent::Handle object will check whether there is still outstanding
223	data and will install a watcher that will write out this data. No errors	234	write data and will install a watcher that will write this data to the
224	will be reported (this mostly matches how the operating system treats	235	socket. No errors will be reported (this mostly matches how the operating
225	outstanding data at socket close time).	236	system treats outstanding data at socket close time).
226		237
227	This will not work for partial TLS data that could not yet been	238	This will not work for partial TLS data that could not be encoded
228	encoded. This data will be lost.	239	yet. This data will be lost. Calling the C<stoptls> method in time might
		240	help.
229		241
230	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object	242	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object
231		243
232	When this parameter is given, it enables TLS (SSL) mode, that means	244	When this parameter is given, it enables TLS (SSL) mode, that means
233	AnyEvent will start a TLS handshake and will transparently encrypt/decrypt	245	AnyEvent will start a TLS handshake as soon as the conenction has been
234	data.	246	established and will transparently encrypt/decrypt data afterwards.
235		247
236	TLS mode requires Net::SSLeay to be installed (it will be loaded	248	TLS mode requires Net::SSLeay to be installed (it will be loaded
237	automatically when you try to create a TLS handle).	249	automatically when you try to create a TLS handle): this module doesn't
		250	have a dependency on that module, so if your module requires it, you have
		251	to add the dependency yourself.
238		252
239	Unlike TCP, TLS has a server and client side: for the TLS server side, use	253	Unlike TCP, TLS has a server and client side: for the TLS server side, use
240	C<accept>, and for the TLS client side of a connection, use C<connect>	254	C<accept>, and for the TLS client side of a connection, use C<connect>
241	mode.	255	mode.
242		256
243	You can also provide your own TLS connection object, but you have	257	You can also provide your own TLS connection object, but you have
244	to make sure that you call either C<Net::SSLeay::set_connect_state>	258	to make sure that you call either C<Net::SSLeay::set_connect_state>
245	or C<Net::SSLeay::set_accept_state> on it before you pass it to	259	or C<Net::SSLeay::set_accept_state> on it before you pass it to
246	AnyEvent::Handle.	260	AnyEvent::Handle.
247		261
		262	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		263	passing in the wrong integer will lead to certain crash. This most often
		264	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		265	segmentation fault.
		266
248	See the C<starttls> method for when need to start TLS negotiation later.	267	See the C<< ->starttls >> method for when need to start TLS negotiation later.
249		268
250	=item tls_ctx => $ssl_ctx	269	=item tls_ctx => $ssl_ctx
251		270
252	Use the given Net::SSLeay::CTX object to create the new TLS connection	271	Use the given C<Net::SSLeay::CTX> object to create the new TLS connection
253	(unless a connection object was specified directly). If this parameter is	272	(unless a connection object was specified directly). If this parameter is
254	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	273	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
255		274
256	=item json => JSON or JSON::XS object	275	=item json => JSON or JSON::XS object
257		276
…		…
262	texts.	281	texts.
263		282
264	Note that you are responsible to depend on the JSON module if you want to	283	Note that you are responsible to depend on the JSON module if you want to
265	use this functionality, as AnyEvent does not have a dependency itself.	284	use this functionality, as AnyEvent does not have a dependency itself.
266		285
267	=item filter_r => $cb
268
269	=item filter_w => $cb
270
271	These exist, but are undocumented at this time. (They are used internally
272	by the TLS code).
273
274	=back	286	=back
275		287
276	=cut	288	=cut
277		289
278	sub new {	290	sub new {
…		…
282		294
283	$self->{fh} or Carp::croak "mandatory argument fh is missing";	295	$self->{fh} or Carp::croak "mandatory argument fh is missing";
284		296
285	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	297	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
286		298
287	if ($self->{tls}) {
288	require Net::SSLeay;
289	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	299	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
290	}	300	if $self->{tls};
291		301
292	$self->{_activity} = AnyEvent->now;	302	$self->{_activity} = AnyEvent->now;
293	$self->_timeout;	303	$self->_timeout;
294		304
295	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	305	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};
…		…
302	}	312	}
303		313
304	sub _shutdown {	314	sub _shutdown {
305	my ($self) = @_;	315	my ($self) = @_;
306		316
307	delete $self->{_tw};	317	delete @$self{qw(_tw _rw _ww fh rbuf wbuf on_read _queue)};
308	delete $self->{_rw};
309	delete $self->{_ww};
310	delete $self->{fh};
311		318
312	$self->stoptls;	319	&_freetls;
313
314	delete $self->{on_read};
315	delete $self->{_queue};
316	}	320	}
317		321
318	sub _error {	322	sub _error {
319	my ($self, $errno, $fatal) = @_;	323	my ($self, $errno, $fatal) = @_;
320		324
…		…
323		327
324	$! = $errno;	328	$! = $errno;
325		329
326	if ($self->{on_error}) {	330	if ($self->{on_error}) {
327	$self->{on_error}($self, $fatal);	331	$self->{on_error}($self, $fatal);
328	} else {	332	} elsif ($self->{fh}) {
329	Carp::croak "AnyEvent::Handle uncaught error: $!";	333	Carp::croak "AnyEvent::Handle uncaught error: $!";
330	}	334	}
331	}	335	}
332		336
333	=item $fh = $handle->fh	337	=item $fh = $handle->fh
334		338
335	This method returns the file handle of the L<AnyEvent::Handle> object.	339	This method returns the file handle used to create the L<AnyEvent::Handle> object.
336		340
337	=cut	341	=cut
338		342
339	sub fh { $_[0]{fh} }	343	sub fh { $_[0]{fh} }
340		344
…		…
358	$_[0]{on_eof} = $_[1];	362	$_[0]{on_eof} = $_[1];
359	}	363	}
360		364
361	=item $handle->on_timeout ($cb)	365	=item $handle->on_timeout ($cb)
362		366
363	Replace the current C<on_timeout> callback, or disables the callback	367	Replace the current C<on_timeout> callback, or disables the callback (but
364	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor	368	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
365	argument.	369	argument and method.
366		370
367	=cut	371	=cut
368		372
369	sub on_timeout {	373	sub on_timeout {
370	$_[0]{on_timeout} = $_[1];	374	$_[0]{on_timeout} = $_[1];
371	}	375	}
372		376
373	=item $handle->autocork ($boolean)	377	=item $handle->autocork ($boolean)
374		378
375	Enables or disables the current autocork behaviour (see C<autocork>	379	Enables or disables the current autocork behaviour (see C<autocork>
376	constructor argument).	380	constructor argument). Changes will only take effect on the next write.
377		381
378	=cut	382	=cut
		383
		384	sub autocork {
		385	$_[0]{autocork} = $_[1];
		386	}
379		387
380	=item $handle->no_delay ($boolean)	388	=item $handle->no_delay ($boolean)
381		389
382	Enables or disables the C<no_delay> setting (see constructor argument of	390	Enables or disables the C<no_delay> setting (see constructor argument of
383	the same name for details).	391	the same name for details).
…		…
476	my ($self, $cb) = @_;	484	my ($self, $cb) = @_;
477		485
478	$self->{on_drain} = $cb;	486	$self->{on_drain} = $cb;
479		487
480	$cb->($self)	488	$cb->($self)
481	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	489	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
482	}	490	}
483		491
484	=item $handle->push_write ($data)	492	=item $handle->push_write ($data)
485		493
486	Queues the given scalar to be written. You can push as much data as you	494	Queues the given scalar to be written. You can push as much data as you
…		…
503	substr $self->{wbuf}, 0, $len, "";	511	substr $self->{wbuf}, 0, $len, "";
504		512
505	$self->{_activity} = AnyEvent->now;	513	$self->{_activity} = AnyEvent->now;
506		514
507	$self->{on_drain}($self)	515	$self->{on_drain}($self)
508	if $self->{low_water_mark} >= length $self->{wbuf}	516	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
509	&& $self->{on_drain};	517	&& $self->{on_drain};
510		518
511	delete $self->{_ww} unless length $self->{wbuf};	519	delete $self->{_ww} unless length $self->{wbuf};
512	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	520	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
513	$self->_error ($!, 1);	521	$self->_error ($!, 1);
…		…
537		545
538	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	546	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
539	->($self, @_);	547	->($self, @_);
540	}	548	}
541		549
542	if ($self->{filter_w}) {	550	if ($self->{tls}) {
543	$self->{filter_w}($self, \$_[0]);	551	$self->{_tls_wbuf} .= $_[0];
		552
		553	&_dotls ($self);
544	} else {	554	} else {
545	$self->{wbuf} .= $_[0];	555	$self->{wbuf} .= $_[0];
546	$self->_drain_wbuf;	556	$self->_drain_wbuf;
547	}	557	}
548	}	558	}
…		…
565	=cut	575	=cut
566		576
567	register_write_type netstring => sub {	577	register_write_type netstring => sub {
568	my ($self, $string) = @_;	578	my ($self, $string) = @_;
569		579
570	sprintf "%d:%s,", (length $string), $string	580	(length $string) . ":$string,"
571	};	581	};
572		582
573	=item packstring => $format, $data	583	=item packstring => $format, $data
574		584
575	An octet string prefixed with an encoded length. The encoding C<$format>	585	An octet string prefixed with an encoded length. The encoding C<$format>
…		…
753	) {	763	) {
754	$self->_error (&Errno::ENOSPC, 1), return;	764	$self->_error (&Errno::ENOSPC, 1), return;
755	}	765	}
756		766
757	while () {	767	while () {
		768	# we need to use a separate tls read buffer, as we must not receive data while
		769	# we are draining the buffer, and this can only happen with TLS.
		770	$self->{rbuf} .= delete $self->{_tls_rbuf} if exists $self->{_tls_rbuf};
		771
758	my $len = length $self->{rbuf};	772	my $len = length $self->{rbuf};
759		773
760	if (my $cb = shift @{ $self->{_queue} }) {	774	if (my $cb = shift @{ $self->{_queue} }) {
761	unless ($cb->($self)) {	775	unless ($cb->($self)) {
762	if ($self->{_eof}) {	776	if ($self->{_eof}) {
…		…
784		798
785	last; # more data might arrive	799	last; # more data might arrive
786	}	800	}
787	} else {	801	} else {
788	# read side becomes idle	802	# read side becomes idle
789	delete $self->{_rw};	803	delete $self->{_rw} unless $self->{tls};
790	last;	804	last;
791	}	805	}
792	}	806	}
793		807
794	if ($self->{_eof}) {	808	if ($self->{_eof}) {
…		…
823		837
824	=item $handle->rbuf	838	=item $handle->rbuf
825		839
826	Returns the read buffer (as a modifiable lvalue).	840	Returns the read buffer (as a modifiable lvalue).
827		841
828	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	842	You can access the read buffer directly as the C<< ->{rbuf} >>
829	you want.	843	member, if you want. However, the only operation allowed on the
		844	read buffer (apart from looking at it) is removing data from its
		845	beginning. Otherwise modifying or appending to it is not allowed and will
		846	lead to hard-to-track-down bugs.
830		847
831	NOTE: The read buffer should only be used or modified if the C<on_read>,	848	NOTE: The read buffer should only be used or modified if the C<on_read>,
832	C<push_read> or C<unshift_read> methods are used. The other read methods	849	C<push_read> or C<unshift_read> methods are used. The other read methods
833	automatically manage the read buffer.	850	automatically manage the read buffer.
834		851
…		…
1089	An octet string prefixed with an encoded length. The encoding C<$format>	1106	An octet string prefixed with an encoded length. The encoding C<$format>
1090	uses the same format as a Perl C<pack> format, but must specify a single	1107	uses the same format as a Perl C<pack> format, but must specify a single
1091	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an	1108	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
1092	optional C<!>, C<< < >> or C<< > >> modifier).	1109	optional C<!>, C<< < >> or C<< > >> modifier).
1093		1110
1094	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.	1111	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1112	EPP uses a prefix of C<N> (4 octtes).
1095		1113
1096	Example: read a block of data prefixed by its length in BER-encoded	1114	Example: read a block of data prefixed by its length in BER-encoded
1097	format (very efficient).	1115	format (very efficient).
1098		1116
1099	$handle->push_read (packstring => "w", sub {	1117	$handle->push_read (packstring => "w", sub {
…		…
1129	}	1147	}
1130	};	1148	};
1131		1149
1132	=item json => $cb->($handle, $hash_or_arrayref)	1150	=item json => $cb->($handle, $hash_or_arrayref)
1133		1151
1134	Reads a JSON object or array, decodes it and passes it to the callback.	1152	Reads a JSON object or array, decodes it and passes it to the
		1153	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1135		1154
1136	If a C<json> object was passed to the constructor, then that will be used	1155	If a C<json> object was passed to the constructor, then that will be used
1137	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1156	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1138		1157
1139	This read type uses the incremental parser available with JSON version	1158	This read type uses the incremental parser available with JSON version
…		…
1156	my $rbuf = \$self->{rbuf};	1175	my $rbuf = \$self->{rbuf};
1157		1176
1158	my $json = $self->{json} \|\|= JSON->new->utf8;	1177	my $json = $self->{json} \|\|= JSON->new->utf8;
1159		1178
1160	sub {	1179	sub {
1161	my $ref = $json->incr_parse ($self->{rbuf});	1180	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1162		1181
1163	if ($ref) {	1182	if ($ref) {
1164	$self->{rbuf} = $json->incr_text;	1183	$self->{rbuf} = $json->incr_text;
1165	$json->incr_text = "";	1184	$json->incr_text = "";
1166	$cb->($self, $ref);	1185	$cb->($self, $ref);
1167		1186
1168	1	1187	1
		1188	} elsif ($@) {
		1189	# error case
		1190	$json->incr_skip;
		1191
		1192	$self->{rbuf} = $json->incr_text;
		1193	$json->incr_text = "";
		1194
		1195	$self->_error (&Errno::EBADMSG);
		1196
		1197	()
1169	} else {	1198	} else {
1170	$self->{rbuf} = "";	1199	$self->{rbuf} = "";
		1200
1171	()	1201	()
1172	}	1202	}
1173	}	1203	}
1174	};	1204	};
1175		1205
…		…
1252	Note that AnyEvent::Handle will automatically C<start_read> for you when	1282	Note that AnyEvent::Handle will automatically C<start_read> for you when
1253	you change the C<on_read> callback or push/unshift a read callback, and it	1283	you change the C<on_read> callback or push/unshift a read callback, and it
1254	will automatically C<stop_read> for you when neither C<on_read> is set nor	1284	will automatically C<stop_read> for you when neither C<on_read> is set nor
1255	there are any read requests in the queue.	1285	there are any read requests in the queue.
1256		1286
		1287	These methods will have no effect when in TLS mode (as TLS doesn't support
		1288	half-duplex connections).
		1289
1257	=cut	1290	=cut
1258		1291
1259	sub stop_read {	1292	sub stop_read {
1260	my ($self) = @_;	1293	my ($self) = @_;
1261		1294
1262	delete $self->{_rw};	1295	delete $self->{_rw} unless $self->{tls};
1263	}	1296	}
1264		1297
1265	sub start_read {	1298	sub start_read {
1266	my ($self) = @_;	1299	my ($self) = @_;
1267		1300
1268	unless ($self->{_rw} \|\| $self->{_eof}) {	1301	unless ($self->{_rw} \|\| $self->{_eof}) {
1269	Scalar::Util::weaken $self;	1302	Scalar::Util::weaken $self;
1270		1303
1271	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1304	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {
1272	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1305	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1273	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;	1306	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;
1274		1307
1275	if ($len > 0) {	1308	if ($len > 0) {
1276	$self->{_activity} = AnyEvent->now;	1309	$self->{_activity} = AnyEvent->now;
1277		1310
1278	$self->{filter_r}	1311	if ($self->{tls}) {
1279	? $self->{filter_r}($self, $rbuf)	1312	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1280	: $self->{_in_drain} \|\| $self->_drain_rbuf;	1313
		1314	&_dotls ($self);
		1315	} else {
		1316	$self->_drain_rbuf unless $self->{_in_drain};
		1317	}
1281		1318
1282	} elsif (defined $len) {	1319	} elsif (defined $len) {
1283	delete $self->{_rw};	1320	delete $self->{_rw};
1284	$self->{_eof} = 1;	1321	$self->{_eof} = 1;
1285	$self->_drain_rbuf unless $self->{_in_drain};	1322	$self->_drain_rbuf unless $self->{_in_drain};
…		…
1289	}	1326	}
1290	});	1327	});
1291	}	1328	}
1292	}	1329	}
1293		1330
		1331	# poll the write BIO and send the data if applicable
1294	sub _dotls {	1332	sub _dotls {
1295	my ($self) = @_;	1333	my ($self) = @_;
1296		1334
1297	my $buf;	1335	my $tmp;
1298		1336
1299	if (length $self->{_tls_wbuf}) {	1337	if (length $self->{_tls_wbuf}) {
1300	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1338	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1301	substr $self->{_tls_wbuf}, 0, $len, "";	1339	substr $self->{_tls_wbuf}, 0, $tmp, "";
1302	}	1340	}
1303	}	1341	}
1304		1342
1305	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1306	$self->{wbuf} .= $buf;
1307	$self->_drain_wbuf;
1308	}
1309
1310	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	1343	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
1311	if (length $buf) {	1344	unless (length $tmp) {
1312	$self->{rbuf} .= $buf;
1313	$self->_drain_rbuf unless $self->{_in_drain};
1314	} else {
1315	# let's treat SSL-eof as we treat normal EOF	1345	# let's treat SSL-eof as we treat normal EOF
		1346	delete $self->{_rw};
1316	$self->{_eof} = 1;	1347	$self->{_eof} = 1;
1317	$self->_shutdown;	1348	&_freetls;
1318	return;
1319	}	1349	}
1320	}
1321		1350
		1351	$self->{_tls_rbuf} .= $tmp;
		1352	$self->_drain_rbuf unless $self->{_in_drain};
		1353	$self->{tls} or return; # tls session might have gone away in callback
		1354	}
		1355
1322	my $err = Net::SSLeay::get_error ($self->{tls}, -1);	1356	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
1323		1357
1324	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {	1358	if ($tmp != Net::SSLeay::ERROR_WANT_READ ()) {
1325	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {	1359	if ($tmp == Net::SSLeay::ERROR_SYSCALL ()) {
1326	return $self->_error ($!, 1);	1360	return $self->_error ($!, 1);
1327	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {	1361	} elsif ($tmp == Net::SSLeay::ERROR_SSL ()) {
1328	return $self->_error (&Errno::EIO, 1);	1362	return $self->_error (&Errno::EIO, 1);
1329	}	1363	}
1330		1364
1331	# all others are fine for our purposes	1365	# all other errors are fine for our purposes
		1366	}
		1367
		1368	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
		1369	$self->{wbuf} .= $tmp;
		1370	$self->_drain_wbuf;
1332	}	1371	}
1333	}	1372	}
1334		1373
1335	=item $handle->starttls ($tls[, $tls_ctx])	1374	=item $handle->starttls ($tls[, $tls_ctx])
1336		1375
…		…
1346		1385
1347	The TLS connection object will end up in C<< $handle->{tls} >> after this	1386	The TLS connection object will end up in C<< $handle->{tls} >> after this
1348	call and can be used or changed to your liking. Note that the handshake	1387	call and can be used or changed to your liking. Note that the handshake
1349	might have already started when this function returns.	1388	might have already started when this function returns.
1350		1389
		1390	If it an error to start a TLS handshake more than once per
		1391	AnyEvent::Handle object (this is due to bugs in OpenSSL).
		1392
1351	=cut	1393	=cut
1352		1394
1353	sub starttls {	1395	sub starttls {
1354	my ($self, $ssl, $ctx) = @_;	1396	my ($self, $ssl, $ctx) = @_;
1355		1397
1356	$self->stoptls;	1398	require Net::SSLeay;
1357		1399
		1400	Carp::croak "it is an error to call starttls more than once on an AnyEvent::Handle object"
		1401	if $self->{tls};
		1402
1358	if ($ssl eq "accept") {	1403	if ($ssl eq "accept") {
1359	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());	1404	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());
1360	Net::SSLeay::set_accept_state ($ssl);	1405	Net::SSLeay::set_accept_state ($ssl);
1361	} elsif ($ssl eq "connect") {	1406	} elsif ($ssl eq "connect") {
1362	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());	1407	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());
…		…
1371	# and mismaintained ssleay-module doesn't even offer them).	1416	# and mismaintained ssleay-module doesn't even offer them).
1372	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1417	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
1373	#	1418	#
1374	# in short: this is a mess.	1419	# in short: this is a mess.
1375	#	1420	#
1376	# note that we do not try to kepe the length constant between writes as we are required to do.	1421	# note that we do not try to keep the length constant between writes as we are required to do.
1377	# we assume that most (but not all) of this insanity only applies to non-blocking cases,	1422	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
1378	# and we drive openssl fully in blocking mode here.	1423	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1424	# have identity issues in that area.
1379	Net::SSLeay::CTX_set_mode ($self->{tls},	1425	Net::SSLeay::CTX_set_mode ($self->{tls},
1380	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)	1426	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)
1381	\| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));	1427	\| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));
1382		1428
1383	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1429	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1384	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1430	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1385		1431
1386	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1432	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});
1387		1433
1388	$self->{filter_w} = sub {	1434	&_dotls; # need to trigger the initial handshake
1389	$_[0]{_tls_wbuf} .= ${$_[1]};	1435	$self->start_read; # make sure we actually do read
1390	&_dotls;
1391	};
1392	$self->{filter_r} = sub {
1393	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1394	&_dotls;
1395	};
1396	}	1436	}
1397		1437
1398	=item $handle->stoptls	1438	=item $handle->stoptls
1399		1439
1400	Destroys the SSL connection, if any. Partial read or write data will be	1440	Shuts down the SSL connection - this makes a proper EOF handshake by
1401	lost.	1441	sending a close notify to the other side, but since OpenSSL doesn't
		1442	support non-blocking shut downs, it is not possible to re-use the stream
		1443	afterwards.
1402		1444
1403	=cut	1445	=cut
1404		1446
1405	sub stoptls {	1447	sub stoptls {
1406	my ($self) = @_;	1448	my ($self) = @_;
1407		1449
		1450	if ($self->{tls}) {
		1451	Net::SSLeay::shutdown ($self->{tls});
		1452
		1453	&_dotls;
		1454
		1455	# we don't give a shit. no, we do, but we can't. no...
		1456	# we, we... have to use openssl :/
		1457	&_freetls;
		1458	}
		1459	}
		1460
		1461	sub _freetls {
		1462	my ($self) = @_;
		1463
		1464	return unless $self->{tls};
		1465
1408	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1466	Net::SSLeay::free (delete $self->{tls});
1409		1467
1410	delete $self->{_rbio};	1468	delete @$self{qw(_rbio _wbio _tls_wbuf)};
1411	delete $self->{_wbio};
1412	delete $self->{_tls_wbuf};
1413	delete $self->{filter_r};
1414	delete $self->{filter_w};
1415	}	1469	}
1416		1470
1417	sub DESTROY {	1471	sub DESTROY {
1418	my $self = shift;	1472	my ($self) = @_;
1419		1473
1420	$self->stoptls;	1474	&_freetls;
1421		1475
1422	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	1476	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1423		1477
1424	if ($linger && length $self->{wbuf}) {	1478	if ($linger && length $self->{wbuf}) {
1425	my $fh = delete $self->{fh};	1479	my $fh = delete $self->{fh};
…		…
1440	@linger = ();	1494	@linger = ();
1441	});	1495	});
1442	}	1496	}
1443	}	1497	}
1444		1498
		1499	=item $handle->destroy
		1500
		1501	Shuts down the handle object as much as possible - this call ensures that
		1502	no further callbacks will be invoked and resources will be freed as much
		1503	as possible. You must not call any methods on the object afterwards.
		1504
		1505	Normally, you can just "forget" any references to an AnyEvent::Handle
		1506	object and it will simply shut down. This works in fatal error and EOF
		1507	callbacks, as well as code outside. It does I<NOT> work in a read or write
		1508	callback, so when you want to destroy the AnyEvent::Handle object from
		1509	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		1510	that case.
		1511
		1512	The handle might still linger in the background and write out remaining
		1513	data, as specified by the C<linger> option, however.
		1514
		1515	=cut
		1516
		1517	sub destroy {
		1518	my ($self) = @_;
		1519
		1520	$self->DESTROY;
		1521	%$self = ();
		1522	}
		1523
1445	=item AnyEvent::Handle::TLS_CTX	1524	=item AnyEvent::Handle::TLS_CTX
1446		1525
1447	This function creates and returns the Net::SSLeay::CTX object used by	1526	This function creates and returns the Net::SSLeay::CTX object used by
1448	default for TLS mode.	1527	default for TLS mode.
1449		1528
…		…
1477	}	1556	}
1478	}	1557	}
1479		1558
1480	=back	1559	=back
1481		1560
		1561
		1562	=head1 NONFREQUENTLY ASKED QUESTIONS
		1563
		1564	=over 4
		1565
		1566	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		1567	still get further invocations!
		1568
		1569	That's because AnyEvent::Handle keeps a reference to itself when handling
		1570	read or write callbacks.
		1571
		1572	It is only safe to "forget" the reference inside EOF or error callbacks,
		1573	from within all other callbacks, you need to explicitly call the C<<
		1574	->destroy >> method.
		1575
		1576	=item I get different callback invocations in TLS mode/Why can't I pause
		1577	reading?
		1578
		1579	Unlike, say, TCP, TLS connections do not consist of two independent
		1580	communication channels, one for each direction. Or put differently. The
		1581	read and write directions are not independent of each other: you cannot
		1582	write data unless you are also prepared to read, and vice versa.
		1583
		1584	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		1585	callback invocations when you are not expecting any read data - the reason
		1586	is that AnyEvent::Handle always reads in TLS mode.
		1587
		1588	During the connection, you have to make sure that you always have a
		1589	non-empty read-queue, or an C<on_read> watcher. At the end of the
		1590	connection (or when you no longer want to use it) you can call the
		1591	C<destroy> method.
		1592
		1593	=item How do I read data until the other side closes the connection?
		1594
		1595	If you just want to read your data into a perl scalar, the easiest way
		1596	to achieve this is by setting an C<on_read> callback that does nothing,
		1597	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		1598	will be in C<$_[0]{rbuf}>:
		1599
		1600	$handle->on_read (sub { });
		1601	$handle->on_eof (undef);
		1602	$handle->on_error (sub {
		1603	my $data = delete $_[0]{rbuf};
		1604	undef $handle;
		1605	});
		1606
		1607	The reason to use C<on_error> is that TCP connections, due to latencies
		1608	and packets loss, might get closed quite violently with an error, when in
		1609	fact, all data has been received.
		1610
		1611	It is usually better to use acknowledgements when transferring data,
		1612	to make sure the other side hasn't just died and you got the data
		1613	intact. This is also one reason why so many internet protocols have an
		1614	explicit QUIT command.
		1615
		1616	=item I don't want to destroy the handle too early - how do I wait until
		1617	all data has been written?
		1618
		1619	After writing your last bits of data, set the C<on_drain> callback
		1620	and destroy the handle in there - with the default setting of
		1621	C<low_water_mark> this will be called precisely when all data has been
		1622	written to the socket:
		1623
		1624	$handle->push_write (...);
		1625	$handle->on_drain (sub {
		1626	warn "all data submitted to the kernel\n";
		1627	undef $handle;
		1628	});
		1629
		1630	=back
		1631
		1632
1482	=head1 SUBCLASSING AnyEvent::Handle	1633	=head1 SUBCLASSING AnyEvent::Handle
1483		1634
1484	In many cases, you might want to subclass AnyEvent::Handle.	1635	In many cases, you might want to subclass AnyEvent::Handle.
1485		1636
1486	To make this easier, a given version of AnyEvent::Handle uses these	1637	To make this easier, a given version of AnyEvent::Handle uses these

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents): Revision 1.87 by root, Thu Aug 21 20:52:39 2008 UTC vs. Revision 1.129 by root, Mon Jun 29 11:04:09 2009 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.87 by root, Thu Aug 21 20:52:39 2008 UTC vs.
Revision 1.129 by root, Mon Jun 29 11:04:09 2009 UTC