[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.80 by root, Sun Jul 27 08:43:32 2008 UTC vs.
Revision 1.142 by root, Mon Jul 6 20:24:47 2009 UTC

…		…
14		14
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16		16
17	=cut	17	=cut
18		18
19	our $VERSION = 4.22;	19	our $VERSION = 4.452;
20		20
21	=head1 SYNOPSIS	21	=head1 SYNOPSIS
22		22
23	use AnyEvent;	23	use AnyEvent;
24	use AnyEvent::Handle;	24	use AnyEvent::Handle;
…		…
27		27
28	my $handle =	28	my $handle =
29	AnyEvent::Handle->new (	29	AnyEvent::Handle->new (
30	fh => \*STDIN,	30	fh => \*STDIN,
31	on_eof => sub {	31	on_eof => sub {
32	$cv->broadcast;	32	$cv->send;
33	},	33	},
34	);	34	);
35		35
36	# send some request line	36	# send some request line
37	$handle->push_write ("getinfo\015\012");	37	$handle->push_write ("getinfo\015\012");
…		…
49		49
50	This module is a helper module to make it easier to do event-based I/O on	50	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	51	filehandles. For utility functions for doing non-blocking connects and accepts
52	on sockets see L<AnyEvent::Util>.	52	on sockets see L<AnyEvent::Util>.
53		53
		54	The L<AnyEvent::Intro> tutorial contains some well-documented
		55	AnyEvent::Handle examples.
		56
54	In the following, when the documentation refers to of "bytes" then this	57	In the following, when the documentation refers to of "bytes" then this
55	means characters. As sysread and syswrite are used for all I/O, their	58	means characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	59	treatment of characters applies to this module as well.
57		60
58	All callbacks will be invoked with the handle object as their first	61	All callbacks will be invoked with the handle object as their first
…		…
60		63
61	=head1 METHODS	64	=head1 METHODS
62		65
63	=over 4	66	=over 4
64		67
65	=item B<new (%args)>	68	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
66		69
67	The constructor supports these arguments (all as key => value pairs).	70	The constructor supports these arguments (all as C<< key => value >> pairs).
68		71
69	=over 4	72	=over 4
70		73
71	=item fh => $filehandle [MANDATORY]	74	=item fh => $filehandle [MANDATORY]
72		75
73	The filehandle this L<AnyEvent::Handle> object will operate on.	76	The filehandle this L<AnyEvent::Handle> object will operate on.
74		77
75	NOTE: The filehandle will be set to non-blocking (using	78	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		80	that mode.
77		81
78	=item on_eof => $cb->($handle)	82	=item on_eof => $cb->($handle)
79		83
80	Set the callback to be called when an end-of-file condition is detected,	84	Set the callback to be called when an end-of-file condition is detected,
81	i.e. in the case of a socket, when the other side has closed the	85	i.e. in the case of a socket, when the other side has closed the
82	connection cleanly.	86	connection cleanly.
83		87
		88	For sockets, this just means that the other side has stopped sending data,
		89	you can still try to write data, and, in fact, one can return from the EOF
		90	callback and continue writing data, as only the read part has been shut
		91	down.
		92
84	While not mandatory, it is I<highly> recommended to set an eof callback,	93	While not mandatory, it is I<highly> recommended to set an EOF callback,
85	otherwise you might end up with a closed socket while you are still	94	otherwise you might end up with a closed socket while you are still
86	waiting for data.	95	waiting for data.
87		96
88	If an EOF condition has been detected but no C<on_eof> callback has been	97	If an EOF condition has been detected but no C<on_eof> callback has been
89	set, then a fatal error will be raised with C<$!> set to <0>.	98	set, then a fatal error will be raised with C<$!> set to <0>.
90		99
91	=item on_error => $cb->($handle, $fatal)	100	=item on_error => $cb->($handle, $fatal, $message)
92		101
93	This is the error callback, which is called when, well, some error	102	This is the error callback, which is called when, well, some error
94	occured, such as not being able to resolve the hostname, failure to	103	occured, such as not being able to resolve the hostname, failure to
95	connect or a read error.	104	connect or a read error.
96		105
97	Some errors are fatal (which is indicated by C<$fatal> being true). On	106	Some errors are fatal (which is indicated by C<$fatal> being true). On
98	fatal errors the handle object will be shut down and will not be	107	fatal errors the handle object will be shut down and will not be usable
		108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal
		109	errors are an EOF condition with active (but unsatisifable) read watchers
		110	(C<EPIPE>) or I/O errors.
		111
		112	AnyEvent::Handle tries to find an appropriate error code for you to check
		113	against, but in some cases (TLS errors), this does not work well. It is
		114	recommended to always output the C<$message> argument in human-readable
		115	error messages (it's usually the same as C<"$!">).
		116
99	usable. Non-fatal errors can be retried by simply returning, but it is	117	Non-fatal errors can be retried by simply returning, but it is recommended
100	recommended to simply ignore this parameter and instead abondon the handle	118	to simply ignore this parameter and instead abondon the handle object
101	object when this callback is invoked.	119	when this callback is invoked. Examples of non-fatal errors are timeouts
		120	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
102		121
103	On callback entrance, the value of C<$!> contains the operating system	122	On callback entrance, the value of C<$!> contains the operating system
104	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	123	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		124	C<EPROTO>).
105		125
106	While not mandatory, it is I<highly> recommended to set this callback, as	126	While not mandatory, it is I<highly> recommended to set this callback, as
107	you will not be notified of errors otherwise. The default simply calls	127	you will not be notified of errors otherwise. The default simply calls
108	C<croak>.	128	C<croak>.
109		129
…		…
113	and no read request is in the queue (unlike read queue callbacks, this	133	and no read request is in the queue (unlike read queue callbacks, this
114	callback will only be called when at least one octet of data is in the	134	callback will only be called when at least one octet of data is in the
115	read buffer).	135	read buffer).
116		136
117	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	137	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
118	method or access the C<$handle->{rbuf}> member directly.	138	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		139	must not enlarge or modify the read buffer, you can only remove data at
		140	the beginning from it.
119		141
120	When an EOF condition is detected then AnyEvent::Handle will first try to	142	When an EOF condition is detected then AnyEvent::Handle will first try to
121	feed all the remaining data to the queued callbacks and C<on_read> before	143	feed all the remaining data to the queued callbacks and C<on_read> before
122	calling the C<on_eof> callback. If no progress can be made, then a fatal	144	calling the C<on_eof> callback. If no progress can be made, then a fatal
123	error will be raised (with C<$!> set to C<EPIPE>).	145	error will be raised (with C<$!> set to C<EPIPE>).
…		…
138	=item timeout => $fractional_seconds	160	=item timeout => $fractional_seconds
139		161
140	If non-zero, then this enables an "inactivity" timeout: whenever this many	162	If non-zero, then this enables an "inactivity" timeout: whenever this many
141	seconds pass without a successful read or write on the underlying file	163	seconds pass without a successful read or write on the underlying file
142	handle, the C<on_timeout> callback will be invoked (and if that one is	164	handle, the C<on_timeout> callback will be invoked (and if that one is
143	missing, an C<ETIMEDOUT> error will be raised).	165	missing, a non-fatal C<ETIMEDOUT> error will be raised).
144		166
145	Note that timeout processing is also active when you currently do not have	167	Note that timeout processing is also active when you currently do not have
146	any outstanding read or write requests: If you plan to keep the connection	168	any outstanding read or write requests: If you plan to keep the connection
147	idle then you should disable the timout temporarily or ignore the timeout	169	idle then you should disable the timout temporarily or ignore the timeout
148	in the C<on_timeout> callback.	170	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		171	restart the timeout.
149		172
150	Zero (the default) disables this timeout.	173	Zero (the default) disables this timeout.
151		174
152	=item on_timeout => $cb->($handle)	175	=item on_timeout => $cb->($handle)
153		176
…		…
157		180
158	=item rbuf_max => <bytes>	181	=item rbuf_max => <bytes>
159		182
160	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	183	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
161	when the read buffer ever (strictly) exceeds this size. This is useful to	184	when the read buffer ever (strictly) exceeds this size. This is useful to
162	avoid denial-of-service attacks.	185	avoid some forms of denial-of-service attacks.
163		186
164	For example, a server accepting connections from untrusted sources should	187	For example, a server accepting connections from untrusted sources should
165	be configured to accept only so-and-so much data that it cannot act on	188	be configured to accept only so-and-so much data that it cannot act on
166	(for example, when expecting a line, an attacker could send an unlimited	189	(for example, when expecting a line, an attacker could send an unlimited
167	amount of data without a callback ever being called as long as the line	190	amount of data without a callback ever being called as long as the line
168	isn't finished).	191	isn't finished).
169		192
170	=item autocork => <boolean>	193	=item autocork => <boolean>
171		194
172	When disabled (the default), then C<push_write> will try to immediately	195	When disabled (the default), then C<push_write> will try to immediately
173	write the data to the handle if possible. This avoids having to register	196	write the data to the handle, if possible. This avoids having to register
174	a write watcher and wait for the next event loop iteration, but can be	197	a write watcher and wait for the next event loop iteration, but can
175	inefficient if you write multiple small chunks (this disadvantage is	198	be inefficient if you write multiple small chunks (on the wire, this
176	usually avoided by your kernel's nagle algorithm, see C<low_delay>).	199	disadvantage is usually avoided by your kernel's nagle algorithm, see
		200	C<no_delay>, but this option can save costly syscalls).
177		201
178	When enabled, then writes will always be queued till the next event loop	202	When enabled, then writes will always be queued till the next event loop
179	iteration. This is efficient when you do many small writes per iteration,	203	iteration. This is efficient when you do many small writes per iteration,
180	but less efficient when you do a single write only.	204	but less efficient when you do a single write only per iteration (or when
		205	the write buffer often is full). It also increases write latency.
181		206
182	=item no_delay => <boolean>	207	=item no_delay => <boolean>
183		208
184	When doing small writes on sockets, your operating system kernel might	209	When doing small writes on sockets, your operating system kernel might
185	wait a bit for more data before actually sending it out. This is called	210	wait a bit for more data before actually sending it out. This is called
186	the Nagle algorithm, and usually it is beneficial.	211	the Nagle algorithm, and usually it is beneficial.
187		212
188	In some situations you want as low a delay as possible, which cna be	213	In some situations you want as low a delay as possible, which can be
189	accomplishd by setting this option to true.	214	accomplishd by setting this option to a true value.
190		215
191	The default is your opertaing system's default behaviour, this option	216	The default is your opertaing system's default behaviour (most likely
192	explicitly enables or disables it, if possible.	217	enabled), this option explicitly enables or disables it, if possible.
193		218
194	=item read_size => <bytes>	219	=item read_size => <bytes>
195		220
196	The default read block size (the amount of bytes this module will try to read	221	The default read block size (the amount of bytes this module will
197	during each (loop iteration). Default: C<8192>.	222	try to read during each loop iteration, which affects memory
		223	requirements). Default: C<8192>.
198		224
199	=item low_water_mark => <bytes>	225	=item low_water_mark => <bytes>
200		226
201	Sets the amount of bytes (default: C<0>) that make up an "empty" write	227	Sets the amount of bytes (default: C<0>) that make up an "empty" write
202	buffer: If the write reaches this size or gets even samller it is	228	buffer: If the write reaches this size or gets even samller it is
203	considered empty.	229	considered empty.
204		230
		231	Sometimes it can be beneficial (for performance reasons) to add data to
		232	the write buffer before it is fully drained, but this is a rare case, as
		233	the operating system kernel usually buffers data as well, so the default
		234	is good in almost all cases.
		235
205	=item linger => <seconds>	236	=item linger => <seconds>
206		237
207	If non-zero (default: C<3600>), then the destructor of the	238	If non-zero (default: C<3600>), then the destructor of the
208	AnyEvent::Handle object will check wether there is still outstanding write	239	AnyEvent::Handle object will check whether there is still outstanding
209	data and will install a watcher that will write out this data. No errors	240	write data and will install a watcher that will write this data to the
210	will be reported (this mostly matches how the operating system treats	241	socket. No errors will be reported (this mostly matches how the operating
211	outstanding data at socket close time).	242	system treats outstanding data at socket close time).
212		243
213	This will not work for partial TLS data that could not yet been	244	This will not work for partial TLS data that could not be encoded
214	encoded. This data will be lost.	245	yet. This data will be lost. Calling the C<stoptls> method in time might
		246	help.
		247
		248	=item peername => $string
		249
		250	A string used to identify the remote site - usually the DNS hostname
		251	(I<not> IDN!) used to create the connection, rarely the IP address.
		252
		253	Apart from being useful in error messages, this string is also used in TLS
		254	peername verification (see C<verify_peername> in L<AnyEvent::TLS>).
215		255
216	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object	256	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object
217		257
218	When this parameter is given, it enables TLS (SSL) mode, that means it	258	When this parameter is given, it enables TLS (SSL) mode, that means
219	will start making tls handshake and will transparently encrypt/decrypt	259	AnyEvent will start a TLS handshake as soon as the conenction has been
220	data.	260	established and will transparently encrypt/decrypt data afterwards.
		261
		262	All TLS protocol errors will be signalled as C<EPROTO>, with an
		263	appropriate error message.
221		264
222	TLS mode requires Net::SSLeay to be installed (it will be loaded	265	TLS mode requires Net::SSLeay to be installed (it will be loaded
223	automatically when you try to create a TLS handle).	266	automatically when you try to create a TLS handle): this module doesn't
		267	have a dependency on that module, so if your module requires it, you have
		268	to add the dependency yourself.
224		269
225	For the TLS server side, use C<accept>, and for the TLS client side of a	270	Unlike TCP, TLS has a server and client side: for the TLS server side, use
226	connection, use C<connect> mode.	271	C<accept>, and for the TLS client side of a connection, use C<connect>
		272	mode.
227		273
228	You can also provide your own TLS connection object, but you have	274	You can also provide your own TLS connection object, but you have
229	to make sure that you call either C<Net::SSLeay::set_connect_state>	275	to make sure that you call either C<Net::SSLeay::set_connect_state>
230	or C<Net::SSLeay::set_accept_state> on it before you pass it to	276	or C<Net::SSLeay::set_accept_state> on it before you pass it to
231	AnyEvent::Handle.	277	AnyEvent::Handle. Also, this module will take ownership of this connection
		278	object.
232		279
		280	At some future point, AnyEvent::Handle might switch to another TLS
		281	implementation, then the option to use your own session object will go
		282	away.
		283
		284	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		285	passing in the wrong integer will lead to certain crash. This most often
		286	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		287	segmentation fault.
		288
233	See the C<starttls> method if you need to start TLS negotiation later.	289	See the C<< ->starttls >> method for when need to start TLS negotiation later.
234		290
235	=item tls_ctx => $ssl_ctx	291	=item tls_ctx => $anyevent_tls
236		292
237	Use the given Net::SSLeay::CTX object to create the new TLS connection	293	Use the given C<AnyEvent::TLS> object to create the new TLS connection
238	(unless a connection object was specified directly). If this parameter is	294	(unless a connection object was specified directly). If this parameter is
239	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	295	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
240		296
		297	Instead of an object, you can also specify a hash reference with C<< key
		298	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		299	new TLS context object.
		300
		301	=item on_starttls => $cb->($handle, $success)
		302
		303	This callback will be invoked when the TLS/SSL handshake has finished. If
		304	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		305	(C<on_stoptls> will not be called in this case).
		306
		307	The session in C<< $handle->{tls} >> can still be examined in this
		308	callback, even when the handshake was not successful.
		309
		310	=item on_stoptls => $cb->($handle)
		311
		312	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		313	set, then it will be invoked after freeing the TLS session. If it is not,
		314	then a TLS shutdown condition will be treated like a normal EOF condition
		315	on the handle.
		316
		317	The session in C<< $handle->{tls} >> can still be examined in this
		318	callback.
		319
		320	This callback will only be called on TLS shutdowns, not when the
		321	underlying handle signals EOF.
		322
241	=item json => JSON or JSON::XS object	323	=item json => JSON or JSON::XS object
242		324
243	This is the json coder object used by the C<json> read and write types.	325	This is the json coder object used by the C<json> read and write types.
244		326
245	If you don't supply it, then AnyEvent::Handle will create and use a	327	If you don't supply it, then AnyEvent::Handle will create and use a
246	suitable one, which will write and expect UTF-8 encoded JSON texts.	328	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		329	texts.
247		330
248	Note that you are responsible to depend on the JSON module if you want to	331	Note that you are responsible to depend on the JSON module if you want to
249	use this functionality, as AnyEvent does not have a dependency itself.	332	use this functionality, as AnyEvent does not have a dependency itself.
250		333
251	=item filter_r => $cb
252
253	=item filter_w => $cb
254
255	These exist, but are undocumented at this time.
256
257	=back	334	=back
258		335
259	=cut	336	=cut
260		337
261	sub new {	338	sub new {
262	my $class = shift;	339	my $class = shift;
263
264	my $self = bless { @_ }, $class;	340	my $self = bless { @_ }, $class;
265		341
266	$self->{fh} or Carp::croak "mandatory argument fh is missing";	342	$self->{fh} or Carp::croak "mandatory argument fh is missing";
267		343
268	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	344	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
269
270	if ($self->{tls}) {
271	require Net::SSLeay;
272	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});
273	}
274		345
275	$self->{_activity} = AnyEvent->now;	346	$self->{_activity} = AnyEvent->now;
276	$self->_timeout;	347	$self->_timeout;
277		348
		349	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
		350
		351	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
		352	if $self->{tls};
		353
278	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	354	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};
279	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
280		355
281	$self->start_read	356	$self->start_read
282	if $self->{on_read};	357	if $self->{on_read};
283		358
284	$self	359	$self->{fh} && $self
285	}	360	}
286		361
287	sub _shutdown {	362	sub _shutdown {
288	my ($self) = @_;	363	my ($self) = @_;
289		364
290	delete $self->{_tw};	365	delete @$self{qw(_tw _rw _ww fh wbuf on_read _queue)};
291	delete $self->{_rw};	366	$self->{_eof} = 1; # tell starttls et. al to stop trying
292	delete $self->{_ww};
293	delete $self->{fh};
294		367
295	$self->stoptls;	368	&_freetls;
296	}	369	}
297		370
298	sub _error {	371	sub _error {
299	my ($self, $errno, $fatal) = @_;	372	my ($self, $errno, $fatal, $message) = @_;
300		373
301	$self->_shutdown	374	$self->_shutdown
302	if $fatal;	375	if $fatal;
303		376
304	$! = $errno;	377	$! = $errno;
		378	$message \|\|= "$!";
305		379
306	if ($self->{on_error}) {	380	if ($self->{on_error}) {
307	$self->{on_error}($self, $fatal);	381	$self->{on_error}($self, $fatal, $message);
308	} else {	382	} elsif ($self->{fh}) {
309	Carp::croak "AnyEvent::Handle uncaught error: $!";	383	Carp::croak "AnyEvent::Handle uncaught error: $message";
310	}	384	}
311	}	385	}
312		386
313	=item $fh = $handle->fh	387	=item $fh = $handle->fh
314		388
315	This method returns the file handle of the L<AnyEvent::Handle> object.	389	This method returns the file handle used to create the L<AnyEvent::Handle> object.
316		390
317	=cut	391	=cut
318		392
319	sub fh { $_[0]{fh} }	393	sub fh { $_[0]{fh} }
320		394
…		…
338	$_[0]{on_eof} = $_[1];	412	$_[0]{on_eof} = $_[1];
339	}	413	}
340		414
341	=item $handle->on_timeout ($cb)	415	=item $handle->on_timeout ($cb)
342		416
343	Replace the current C<on_timeout> callback, or disables the callback	417	Replace the current C<on_timeout> callback, or disables the callback (but
344	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor	418	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
345	argument.	419	argument and method.
346		420
347	=cut	421	=cut
348		422
349	sub on_timeout {	423	sub on_timeout {
350	$_[0]{on_timeout} = $_[1];	424	$_[0]{on_timeout} = $_[1];
351	}	425	}
352		426
353	=item $handle->autocork ($boolean)	427	=item $handle->autocork ($boolean)
354		428
355	Enables or disables the current autocork behaviour (see C<autocork>	429	Enables or disables the current autocork behaviour (see C<autocork>
356	constructor argument).	430	constructor argument). Changes will only take effect on the next write.
357		431
358	=cut	432	=cut
		433
		434	sub autocork {
		435	$_[0]{autocork} = $_[1];
		436	}
359		437
360	=item $handle->no_delay ($boolean)	438	=item $handle->no_delay ($boolean)
361		439
362	Enables or disables the C<no_delay> setting (see constructor argument of	440	Enables or disables the C<no_delay> setting (see constructor argument of
363	the same name for details).	441	the same name for details).
…		…
369		447
370	eval {	448	eval {
371	local $SIG{__DIE__};	449	local $SIG{__DIE__};
372	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	450	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];
373	};	451	};
		452	}
		453
		454	=item $handle->on_starttls ($cb)
		455
		456	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		457
		458	=cut
		459
		460	sub on_starttls {
		461	$_[0]{on_starttls} = $_[1];
		462	}
		463
		464	=item $handle->on_stoptls ($cb)
		465
		466	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		467
		468	=cut
		469
		470	sub on_starttls {
		471	$_[0]{on_stoptls} = $_[1];
374	}	472	}
375		473
376	#############################################################################	474	#############################################################################
377		475
378	=item $handle->timeout ($seconds)	476	=item $handle->timeout ($seconds)
…		…
456	my ($self, $cb) = @_;	554	my ($self, $cb) = @_;
457		555
458	$self->{on_drain} = $cb;	556	$self->{on_drain} = $cb;
459		557
460	$cb->($self)	558	$cb->($self)
461	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	559	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
462	}	560	}
463		561
464	=item $handle->push_write ($data)	562	=item $handle->push_write ($data)
465		563
466	Queues the given scalar to be written. You can push as much data as you	564	Queues the given scalar to be written. You can push as much data as you
…		…
483	substr $self->{wbuf}, 0, $len, "";	581	substr $self->{wbuf}, 0, $len, "";
484		582
485	$self->{_activity} = AnyEvent->now;	583	$self->{_activity} = AnyEvent->now;
486		584
487	$self->{on_drain}($self)	585	$self->{on_drain}($self)
488	if $self->{low_water_mark} >= length $self->{wbuf}	586	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
489	&& $self->{on_drain};	587	&& $self->{on_drain};
490		588
491	delete $self->{_ww} unless length $self->{wbuf};	589	delete $self->{_ww} unless length $self->{wbuf};
492	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	590	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
493	$self->_error ($!, 1);	591	$self->_error ($!, 1);
…		…
517		615
518	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	616	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
519	->($self, @_);	617	->($self, @_);
520	}	618	}
521		619
522	if ($self->{filter_w}) {	620	if ($self->{tls}) {
523	$self->{filter_w}($self, \$_[0]);	621	$self->{_tls_wbuf} .= $_[0];
		622
		623	&_dotls ($self);
524	} else {	624	} else {
525	$self->{wbuf} .= $_[0];	625	$self->{wbuf} .= $_[0];
526	$self->_drain_wbuf;	626	$self->_drain_wbuf;
527	}	627	}
528	}	628	}
…		…
545	=cut	645	=cut
546		646
547	register_write_type netstring => sub {	647	register_write_type netstring => sub {
548	my ($self, $string) = @_;	648	my ($self, $string) = @_;
549		649
550	sprintf "%d:%s,", (length $string), $string	650	(length $string) . ":$string,"
551	};	651	};
552		652
553	=item packstring => $format, $data	653	=item packstring => $format, $data
554		654
555	An octet string prefixed with an encoded length. The encoding C<$format>	655	An octet string prefixed with an encoded length. The encoding C<$format>
…		…
620		720
621	pack "w/a*", Storable::nfreeze ($ref)	721	pack "w/a*", Storable::nfreeze ($ref)
622	};	722	};
623		723
624	=back	724	=back
		725
		726	=item $handle->push_shutdown
		727
		728	Sometimes you know you want to close the socket after writing your data
		729	before it was actually written. One way to do that is to replace your
		730	C<on_drain> handler by a callback that shuts down the socket (and set
		731	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		732	replaces the C<on_drain> callback with:
		733
		734	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		735
		736	This simply shuts down the write side and signals an EOF condition to the
		737	the peer.
		738
		739	You can rely on the normal read queue and C<on_eof> handling
		740	afterwards. This is the cleanest way to close a connection.
		741
		742	=cut
		743
		744	sub push_shutdown {
		745	my ($self) = @_;
		746
		747	delete $self->{low_water_mark};
		748	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		749	}
625		750
626	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	751	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
627		752
628	This function (not method) lets you add your own types to C<push_write>.	753	This function (not method) lets you add your own types to C<push_write>.
629	Whenever the given C<type> is used, C<push_write> will invoke the code	754	Whenever the given C<type> is used, C<push_write> will invoke the code
…		…
729		854
730	if (	855	if (
731	defined $self->{rbuf_max}	856	defined $self->{rbuf_max}
732	&& $self->{rbuf_max} < length $self->{rbuf}	857	&& $self->{rbuf_max} < length $self->{rbuf}
733	) {	858	) {
734	return $self->_error (&Errno::ENOSPC, 1);	859	$self->_error (&Errno::ENOSPC, 1), return;
735	}	860	}
736		861
737	while () {	862	while () {
		863	# we need to use a separate tls read buffer, as we must not receive data while
		864	# we are draining the buffer, and this can only happen with TLS.
		865	$self->{rbuf} .= delete $self->{_tls_rbuf} if exists $self->{_tls_rbuf};
		866
738	my $len = length $self->{rbuf};	867	my $len = length $self->{rbuf};
739		868
740	if (my $cb = shift @{ $self->{_queue} }) {	869	if (my $cb = shift @{ $self->{_queue} }) {
741	unless ($cb->($self)) {	870	unless ($cb->($self)) {
742	if ($self->{_eof}) {	871	if ($self->{_eof}) {
743	# no progress can be made (not enough data and no data forthcoming)	872	# no progress can be made (not enough data and no data forthcoming)
744	$self->_error (&Errno::EPIPE, 1), last;	873	$self->_error (&Errno::EPIPE, 1), return;
745	}	874	}
746		875
747	unshift @{ $self->{_queue} }, $cb;	876	unshift @{ $self->{_queue} }, $cb;
748	last;	877	last;
749	}	878	}
…		…
757	&& !@{ $self->{_queue} } # and the queue is still empty	886	&& !@{ $self->{_queue} } # and the queue is still empty
758	&& $self->{on_read} # but we still have on_read	887	&& $self->{on_read} # but we still have on_read
759	) {	888	) {
760	# no further data will arrive	889	# no further data will arrive
761	# so no progress can be made	890	# so no progress can be made
762	$self->_error (&Errno::EPIPE, 1), last	891	$self->_error (&Errno::EPIPE, 1), return
763	if $self->{_eof};	892	if $self->{_eof};
764		893
765	last; # more data might arrive	894	last; # more data might arrive
766	}	895	}
767	} else {	896	} else {
768	# read side becomes idle	897	# read side becomes idle
769	delete $self->{_rw};	898	delete $self->{_rw} unless $self->{tls};
770	last;	899	last;
771	}	900	}
772	}	901	}
773		902
774	if ($self->{_eof}) {	903	if ($self->{_eof}) {
775	if ($self->{on_eof}) {	904	if ($self->{on_eof}) {
776	$self->{on_eof}($self)	905	$self->{on_eof}($self)
777	} else {	906	} else {
778	$self->_error (0, 1);	907	$self->_error (0, 1, "Unexpected end-of-file");
779	}	908	}
780	}	909	}
781		910
782	# may need to restart read watcher	911	# may need to restart read watcher
783	unless ($self->{_rw}) {	912	unless ($self->{_rw}) {
…		…
803		932
804	=item $handle->rbuf	933	=item $handle->rbuf
805		934
806	Returns the read buffer (as a modifiable lvalue).	935	Returns the read buffer (as a modifiable lvalue).
807		936
808	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	937	You can access the read buffer directly as the C<< ->{rbuf} >>
809	you want.	938	member, if you want. However, the only operation allowed on the
		939	read buffer (apart from looking at it) is removing data from its
		940	beginning. Otherwise modifying or appending to it is not allowed and will
		941	lead to hard-to-track-down bugs.
810		942
811	NOTE: The read buffer should only be used or modified if the C<on_read>,	943	NOTE: The read buffer should only be used or modified if the C<on_read>,
812	C<push_read> or C<unshift_read> methods are used. The other read methods	944	C<push_read> or C<unshift_read> methods are used. The other read methods
813	automatically manage the read buffer.	945	automatically manage the read buffer.
814		946
…		…
1069	An octet string prefixed with an encoded length. The encoding C<$format>	1201	An octet string prefixed with an encoded length. The encoding C<$format>
1070	uses the same format as a Perl C<pack> format, but must specify a single	1202	uses the same format as a Perl C<pack> format, but must specify a single
1071	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an	1203	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
1072	optional C<!>, C<< < >> or C<< > >> modifier).	1204	optional C<!>, C<< < >> or C<< > >> modifier).
1073		1205
1074	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.	1206	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1207	EPP uses a prefix of C<N> (4 octtes).
1075		1208
1076	Example: read a block of data prefixed by its length in BER-encoded	1209	Example: read a block of data prefixed by its length in BER-encoded
1077	format (very efficient).	1210	format (very efficient).
1078		1211
1079	$handle->push_read (packstring => "w", sub {	1212	$handle->push_read (packstring => "w", sub {
…		…
1109	}	1242	}
1110	};	1243	};
1111		1244
1112	=item json => $cb->($handle, $hash_or_arrayref)	1245	=item json => $cb->($handle, $hash_or_arrayref)
1113		1246
1114	Reads a JSON object or array, decodes it and passes it to the callback.	1247	Reads a JSON object or array, decodes it and passes it to the
		1248	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1115		1249
1116	If a C<json> object was passed to the constructor, then that will be used	1250	If a C<json> object was passed to the constructor, then that will be used
1117	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1251	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1118		1252
1119	This read type uses the incremental parser available with JSON version	1253	This read type uses the incremental parser available with JSON version
…		…
1128	=cut	1262	=cut
1129		1263
1130	register_read_type json => sub {	1264	register_read_type json => sub {
1131	my ($self, $cb) = @_;	1265	my ($self, $cb) = @_;
1132		1266
1133	require JSON;	1267	my $json = $self->{json} \|\|=
		1268	eval { require JSON::XS; JSON::XS->new->utf8 }
		1269	\|\| do { require JSON; JSON->new->utf8 };
1134		1270
1135	my $data;	1271	my $data;
1136	my $rbuf = \$self->{rbuf};	1272	my $rbuf = \$self->{rbuf};
1137		1273
1138	my $json = $self->{json} \|\|= JSON->new->utf8;
1139
1140	sub {	1274	sub {
1141	my $ref = $json->incr_parse ($self->{rbuf});	1275	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1142		1276
1143	if ($ref) {	1277	if ($ref) {
1144	$self->{rbuf} = $json->incr_text;	1278	$self->{rbuf} = $json->incr_text;
1145	$json->incr_text = "";	1279	$json->incr_text = "";
1146	$cb->($self, $ref);	1280	$cb->($self, $ref);
1147		1281
1148	1	1282	1
		1283	} elsif ($@) {
		1284	# error case
		1285	$json->incr_skip;
		1286
		1287	$self->{rbuf} = $json->incr_text;
		1288	$json->incr_text = "";
		1289
		1290	$self->_error (&Errno::EBADMSG);
		1291
		1292	()
1149	} else {	1293	} else {
1150	$self->{rbuf} = "";	1294	$self->{rbuf} = "";
		1295
1151	()	1296	()
1152	}	1297	}
1153	}	1298	}
1154	};	1299	};
1155		1300
…		…
1232	Note that AnyEvent::Handle will automatically C<start_read> for you when	1377	Note that AnyEvent::Handle will automatically C<start_read> for you when
1233	you change the C<on_read> callback or push/unshift a read callback, and it	1378	you change the C<on_read> callback or push/unshift a read callback, and it
1234	will automatically C<stop_read> for you when neither C<on_read> is set nor	1379	will automatically C<stop_read> for you when neither C<on_read> is set nor
1235	there are any read requests in the queue.	1380	there are any read requests in the queue.
1236		1381
		1382	These methods will have no effect when in TLS mode (as TLS doesn't support
		1383	half-duplex connections).
		1384
1237	=cut	1385	=cut
1238		1386
1239	sub stop_read {	1387	sub stop_read {
1240	my ($self) = @_;	1388	my ($self) = @_;
1241		1389
1242	delete $self->{_rw};	1390	delete $self->{_rw} unless $self->{tls};
1243	}	1391	}
1244		1392
1245	sub start_read {	1393	sub start_read {
1246	my ($self) = @_;	1394	my ($self) = @_;
1247		1395
1248	unless ($self->{_rw} \|\| $self->{_eof}) {	1396	unless ($self->{_rw} \|\| $self->{_eof}) {
1249	Scalar::Util::weaken $self;	1397	Scalar::Util::weaken $self;
1250		1398
1251	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1399	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {
1252	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1400	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1253	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;	1401	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;
1254		1402
1255	if ($len > 0) {	1403	if ($len > 0) {
1256	$self->{_activity} = AnyEvent->now;	1404	$self->{_activity} = AnyEvent->now;
1257		1405
1258	$self->{filter_r}	1406	if ($self->{tls}) {
1259	? $self->{filter_r}($self, $rbuf)	1407	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1260	: $self->{_in_drain} \|\| $self->_drain_rbuf;	1408
		1409	&_dotls ($self);
		1410	} else {
		1411	$self->_drain_rbuf unless $self->{_in_drain};
		1412	}
1261		1413
1262	} elsif (defined $len) {	1414	} elsif (defined $len) {
1263	delete $self->{_rw};	1415	delete $self->{_rw};
1264	$self->{_eof} = 1;	1416	$self->{_eof} = 1;
1265	$self->_drain_rbuf unless $self->{_in_drain};	1417	$self->_drain_rbuf unless $self->{_in_drain};
…		…
1269	}	1421	}
1270	});	1422	});
1271	}	1423	}
1272	}	1424	}
1273		1425
		1426	our $ERROR_SYSCALL;
		1427	our $ERROR_WANT_READ;
		1428
		1429	sub _tls_error {
		1430	my ($self, $err) = @_;
		1431
		1432	return $self->_error ($!, 1)
		1433	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1434
		1435	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1436
		1437	# reduce error string to look less scary
		1438	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1439
		1440	$self->_error (&Errno::EPROTO, 1, $err);
		1441	}
		1442
		1443	# poll the write BIO and send the data if applicable
		1444	# also decode read data if possible
		1445	# this is basiclaly our TLS state machine
		1446	# more efficient implementations are possible with openssl,
		1447	# but not with the buggy and incomplete Net::SSLeay.
1274	sub _dotls {	1448	sub _dotls {
1275	my ($self) = @_;	1449	my ($self) = @_;
1276		1450
1277	my $buf;	1451	my $tmp;
1278		1452
1279	if (length $self->{_tls_wbuf}) {	1453	if (length $self->{_tls_wbuf}) {
1280	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1454	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1281	substr $self->{_tls_wbuf}, 0, $len, "";	1455	substr $self->{_tls_wbuf}, 0, $tmp, "";
1282	}	1456	}
1283	}
1284		1457
		1458	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1459	return $self->_tls_error ($tmp)
		1460	if $tmp != $ERROR_WANT_READ
		1461	&& ($tmp != $ERROR_SYSCALL \|\| $!);
		1462	}
		1463
		1464	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1465	unless (length $tmp) {
		1466	&_freetls;
		1467	if ($self->{on_stoptls}) {
		1468	$self->{on_stoptls}($self);
		1469	return;
		1470	} else {
		1471	# let's treat SSL-eof as we treat normal EOF
		1472	delete $self->{_rw};
		1473	$self->{_eof} = 1;
		1474	}
		1475	}
		1476
		1477	$self->{_tls_rbuf} .= $tmp;
		1478	$self->_drain_rbuf unless $self->{_in_drain};
		1479	$self->{tls} or return; # tls session might have gone away in callback
		1480	}
		1481
		1482	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
		1483	return $self->_tls_error ($tmp)
		1484	if $tmp != $ERROR_WANT_READ
		1485	&& ($tmp != $ERROR_SYSCALL \|\| $!);
		1486
1285	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1487	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1286	$self->{wbuf} .= $buf;	1488	$self->{wbuf} .= $tmp;
1287	$self->_drain_wbuf;	1489	$self->_drain_wbuf;
1288	}	1490	}
1289		1491
1290	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	1492	$self->{_on_starttls}
1291	if (length $buf) {	1493	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1292	$self->{rbuf} .= $buf;	1494	and (delete $self->{_on_starttls})->($self, 1);
1293	$self->_drain_rbuf unless $self->{_in_drain};
1294	} else {
1295	# let's treat SSL-eof as we treat normal EOF
1296	$self->{_eof} = 1;
1297	$self->_shutdown;
1298	return;
1299	}
1300	}
1301
1302	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
1303
1304	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1305	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1306	return $self->_error ($!, 1);
1307	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
1308	return $self->_error (&Errno::EIO, 1);
1309	}
1310
1311	# all others are fine for our purposes
1312	}
1313	}	1495	}
1314		1496
1315	=item $handle->starttls ($tls[, $tls_ctx])	1497	=item $handle->starttls ($tls[, $tls_ctx])
1316		1498
1317	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1499	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
…		…
1319	C<starttls>.	1501	C<starttls>.
1320		1502
1321	The first argument is the same as the C<tls> constructor argument (either	1503	The first argument is the same as the C<tls> constructor argument (either
1322	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1504	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1323		1505
1324	The second argument is the optional C<Net::SSLeay::CTX> object that is	1506	The second argument is the optional C<AnyEvent::TLS> object that is used
1325	used when AnyEvent::Handle has to create its own TLS connection object.	1507	when AnyEvent::Handle has to create its own TLS connection object, or
		1508	a hash reference with C<< key => value >> pairs that will be used to
		1509	construct a new context.
1326		1510
1327	The TLS connection object will end up in C<< $handle->{tls} >> after this	1511	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1328	call and can be used or changed to your liking. Note that the handshake	1512	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1329	might have already started when this function returns.	1513	changed to your liking. Note that the handshake might have already started
		1514	when this function returns.
1330		1515
		1516	If it an error to start a TLS handshake more than once per
		1517	AnyEvent::Handle object (this is due to bugs in OpenSSL).
		1518
1331	=cut	1519	=cut
		1520
		1521	our %TLS_CACHE; #TODO not yet documented, should we?
1332		1522
1333	sub starttls {	1523	sub starttls {
1334	my ($self, $ssl, $ctx) = @_;	1524	my ($self, $ssl, $ctx) = @_;
1335		1525
1336	$self->stoptls;	1526	require Net::SSLeay;
1337		1527
1338	if ($ssl eq "accept") {	1528	Carp::croak "it is an error to call starttls more than once on an AnyEvent::Handle object"
1339	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());	1529	if $self->{tls};
1340	Net::SSLeay::set_accept_state ($ssl);	1530
1341	} elsif ($ssl eq "connect") {	1531	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
1342	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());	1532	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
1343	Net::SSLeay::set_connect_state ($ssl);	1533
		1534	$ctx \|\|= $self->{tls_ctx};
		1535
		1536	if ("HASH" eq ref $ctx) {
		1537	require AnyEvent::TLS;
		1538
		1539	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context
		1540
		1541	if ($ctx->{cache}) {
		1542	my $key = $ctx+0;
		1543	$ctx = $TLS_CACHE{$key} \|\|= new AnyEvent::TLS %$ctx;
		1544	} else {
		1545	$ctx = new AnyEvent::TLS %$ctx;
		1546	}
		1547	}
1344	}	1548
1345		1549	$self->{tls_ctx} = $ctx \|\| TLS_CTX ();
1346	$self->{tls} = $ssl;	1550	$self->{tls} = $ssl = $self->{tls_ctx}->_get_session ($ssl, $self, $self->{peername});
1347		1551
1348	# basically, this is deep magic (because SSL_read should have the same issues)	1552	# basically, this is deep magic (because SSL_read should have the same issues)
1349	# but the openssl maintainers basically said: "trust us, it just works".	1553	# but the openssl maintainers basically said: "trust us, it just works".
1350	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1554	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1351	# and mismaintained ssleay-module doesn't even offer them).	1555	# and mismaintained ssleay-module doesn't even offer them).
1352	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1556	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1557	#
		1558	# in short: this is a mess.
		1559	#
		1560	# note that we do not try to keep the length constant between writes as we are required to do.
		1561	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1562	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1563	# have identity issues in that area.
1353	Net::SSLeay::CTX_set_mode ($self->{tls},	1564	# Net::SSLeay::CTX_set_mode ($ssl,
1354	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)	1565	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)
1355	\| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));	1566	# \| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));
		1567	Net::SSLeay::CTX_set_mode ($ssl, 1\|2);
1356		1568
1357	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1569	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1358	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1570	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1359		1571
1360	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1572	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});
1361		1573
1362	$self->{filter_w} = sub {	1574	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1363	$_[0]{_tls_wbuf} .= ${$_[1]};	1575	if exists $self->{on_starttls};
1364	&_dotls;	1576
1365	};	1577	&_dotls; # need to trigger the initial handshake
1366	$self->{filter_r} = sub {	1578	$self->start_read; # make sure we actually do read
1367	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1368	&_dotls;
1369	};
1370	}	1579	}
1371		1580
1372	=item $handle->stoptls	1581	=item $handle->stoptls
1373		1582
1374	Destroys the SSL connection, if any. Partial read or write data will be	1583	Shuts down the SSL connection - this makes a proper EOF handshake by
1375	lost.	1584	sending a close notify to the other side, but since OpenSSL doesn't
		1585	support non-blocking shut downs, it is not possible to re-use the stream
		1586	afterwards.
1376		1587
1377	=cut	1588	=cut
1378		1589
1379	sub stoptls {	1590	sub stoptls {
1380	my ($self) = @_;	1591	my ($self) = @_;
1381		1592
1382	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1593	if ($self->{tls}) {
		1594	Net::SSLeay::shutdown ($self->{tls});
1383		1595
1384	delete $self->{_rbio};	1596	&_dotls;
1385	delete $self->{_wbio};	1597
1386	delete $self->{_tls_wbuf};	1598	# # we don't give a shit. no, we do, but we can't. no...#d#
1387	delete $self->{filter_r};	1599	# # we, we... have to use openssl :/#d#
1388	delete $self->{filter_w};	1600	# &_freetls;#d#
		1601	}
		1602	}
		1603
		1604	sub _freetls {
		1605	my ($self) = @_;
		1606
		1607	return unless $self->{tls};
		1608
		1609	$self->{_on_starttls}
		1610	and (delete $self->{_on_starttls})->($self, undef);
		1611
		1612	$self->{tls_ctx}->_put_session (delete $self->{tls});
		1613
		1614	delete @$self{qw(_rbio _wbio _tls_wbuf)};
1389	}	1615	}
1390		1616
1391	sub DESTROY {	1617	sub DESTROY {
1392	my $self = shift;	1618	my ($self) = @_;
1393		1619
1394	$self->stoptls;	1620	&_freetls;
1395		1621
1396	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	1622	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1397		1623
1398	if ($linger && length $self->{wbuf}) {	1624	if ($linger && length $self->{wbuf}) {
1399	my $fh = delete $self->{fh};	1625	my $fh = delete $self->{fh};
…		…
1414	@linger = ();	1640	@linger = ();
1415	});	1641	});
1416	}	1642	}
1417	}	1643	}
1418		1644
		1645	=item $handle->destroy
		1646
		1647	Shuts down the handle object as much as possible - this call ensures that
		1648	no further callbacks will be invoked and as many resources as possible
		1649	will be freed. You must not call any methods on the object afterwards.
		1650
		1651	Normally, you can just "forget" any references to an AnyEvent::Handle
		1652	object and it will simply shut down. This works in fatal error and EOF
		1653	callbacks, as well as code outside. It does I<NOT> work in a read or write
		1654	callback, so when you want to destroy the AnyEvent::Handle object from
		1655	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		1656	that case.
		1657
		1658	The handle might still linger in the background and write out remaining
		1659	data, as specified by the C<linger> option, however.
		1660
		1661	=cut
		1662
		1663	sub destroy {
		1664	my ($self) = @_;
		1665
		1666	$self->DESTROY;
		1667	%$self = ();
		1668	}
		1669
1419	=item AnyEvent::Handle::TLS_CTX	1670	=item AnyEvent::Handle::TLS_CTX
1420		1671
1421	This function creates and returns the Net::SSLeay::CTX object used by	1672	This function creates and returns the AnyEvent::TLS object used by default
1422	default for TLS mode.	1673	for TLS mode.
1423		1674
1424	The context is created like this:	1675	The context is created by calling L<AnyEvent::TLS> without any arguments.
1425
1426	Net::SSLeay::load_error_strings;
1427	Net::SSLeay::SSLeay_add_ssl_algorithms;
1428	Net::SSLeay::randomize;
1429
1430	my $CTX = Net::SSLeay::CTX_new;
1431
1432	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1433		1676
1434	=cut	1677	=cut
1435		1678
1436	our $TLS_CTX;	1679	our $TLS_CTX;
1437		1680
1438	sub TLS_CTX() {	1681	sub TLS_CTX() {
1439	$TLS_CTX \|\| do {	1682	$TLS_CTX \|\|= do {
1440	require Net::SSLeay;	1683	require AnyEvent::TLS;
1441		1684
1442	Net::SSLeay::load_error_strings ();	1685	new AnyEvent::TLS
1443	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1444	Net::SSLeay::randomize ();
1445
1446	$TLS_CTX = Net::SSLeay::CTX_new ();
1447
1448	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1449
1450	$TLS_CTX
1451	}	1686	}
1452	}	1687	}
1453		1688
1454	=back	1689	=back
		1690
		1691
		1692	=head1 NONFREQUENTLY ASKED QUESTIONS
		1693
		1694	=over 4
		1695
		1696	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		1697	still get further invocations!
		1698
		1699	That's because AnyEvent::Handle keeps a reference to itself when handling
		1700	read or write callbacks.
		1701
		1702	It is only safe to "forget" the reference inside EOF or error callbacks,
		1703	from within all other callbacks, you need to explicitly call the C<<
		1704	->destroy >> method.
		1705
		1706	=item I get different callback invocations in TLS mode/Why can't I pause
		1707	reading?
		1708
		1709	Unlike, say, TCP, TLS connections do not consist of two independent
		1710	communication channels, one for each direction. Or put differently. The
		1711	read and write directions are not independent of each other: you cannot
		1712	write data unless you are also prepared to read, and vice versa.
		1713
		1714	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		1715	callback invocations when you are not expecting any read data - the reason
		1716	is that AnyEvent::Handle always reads in TLS mode.
		1717
		1718	During the connection, you have to make sure that you always have a
		1719	non-empty read-queue, or an C<on_read> watcher. At the end of the
		1720	connection (or when you no longer want to use it) you can call the
		1721	C<destroy> method.
		1722
		1723	=item How do I read data until the other side closes the connection?
		1724
		1725	If you just want to read your data into a perl scalar, the easiest way
		1726	to achieve this is by setting an C<on_read> callback that does nothing,
		1727	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		1728	will be in C<$_[0]{rbuf}>:
		1729
		1730	$handle->on_read (sub { });
		1731	$handle->on_eof (undef);
		1732	$handle->on_error (sub {
		1733	my $data = delete $_[0]{rbuf};
		1734	undef $handle;
		1735	});
		1736
		1737	The reason to use C<on_error> is that TCP connections, due to latencies
		1738	and packets loss, might get closed quite violently with an error, when in
		1739	fact, all data has been received.
		1740
		1741	It is usually better to use acknowledgements when transferring data,
		1742	to make sure the other side hasn't just died and you got the data
		1743	intact. This is also one reason why so many internet protocols have an
		1744	explicit QUIT command.
		1745
		1746	=item I don't want to destroy the handle too early - how do I wait until
		1747	all data has been written?
		1748
		1749	After writing your last bits of data, set the C<on_drain> callback
		1750	and destroy the handle in there - with the default setting of
		1751	C<low_water_mark> this will be called precisely when all data has been
		1752	written to the socket:
		1753
		1754	$handle->push_write (...);
		1755	$handle->on_drain (sub {
		1756	warn "all data submitted to the kernel\n";
		1757	undef $handle;
		1758	});
		1759
		1760	=back
		1761
1455		1762
1456	=head1 SUBCLASSING AnyEvent::Handle	1763	=head1 SUBCLASSING AnyEvent::Handle
1457		1764
1458	In many cases, you might want to subclass AnyEvent::Handle.	1765	In many cases, you might want to subclass AnyEvent::Handle.
1459		1766

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents): Revision 1.80 by root, Sun Jul 27 08:43:32 2008 UTC vs. Revision 1.142 by root, Mon Jul 6 20:24:47 2009 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.80 by root, Sun Jul 27 08:43:32 2008 UTC vs.
Revision 1.142 by root, Mon Jul 6 20:24:47 2009 UTC