ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.80 by root, Sun Jul 27 08:43:32 2008 UTC vs.
Revision 1.172 by root, Wed Aug 5 20:50:27 2009 UTC

1	package AnyEvent::Handle;	1	package AnyEvent::Handle;
2		2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();	3	use Scalar::Util ();
9	use Carp ();	4	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);	5	use Errno qw(EAGAIN EINTR);
12		6
		7	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		8	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		9
13	=head1 NAME	10	=head1 NAME
14		11
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	12	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16		13
17	=cut	14	=cut
18		15
19	our $VERSION = 4.22;	16	our $VERSION = 4.901;
20		17
21	=head1 SYNOPSIS	18	=head1 SYNOPSIS
22		19
23	use AnyEvent;	20	use AnyEvent;
24	use AnyEvent::Handle;	21	use AnyEvent::Handle;
25		22
26	my $cv = AnyEvent->condvar;	23	my $cv = AnyEvent->condvar;
27		24
28	my $handle =	25	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	26	fh => \*STDIN,
31	on_eof => sub {	27	on_error => sub {
32	$cv->broadcast;	28	my ($hdl, $fatal, $msg) = @_;
33	},	29	warn "got error $msg\n";
		30	$hdl->destroy;
		31	$cv->send;
34	);	32	);
35		33
36	# send some request line	34	# send some request line
37	$handle->push_write ("getinfo\015\012");	35	$hdl->push_write ("getinfo\015\012");
38		36
39	# read the response line	37	# read the response line
40	$handle->push_read (line => sub {	38	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	39	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	40	warn "got line <$line>\n";
43	$cv->send;	41	$cv->send;
44	});	42	});
45		43
46	$cv->recv;	44	$cv->recv;
47		45
48	=head1 DESCRIPTION	46	=head1 DESCRIPTION
49		47
50	This module is a helper module to make it easier to do event-based I/O on	48	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	49	filehandles.
52	on sockets see L<AnyEvent::Util>.	50
		51	The L<AnyEvent::Intro> tutorial contains some well-documented
		52	AnyEvent::Handle examples.
53		53
54	In the following, when the documentation refers to of "bytes" then this	54	In the following, when the documentation refers to of "bytes" then this
55	means characters. As sysread and syswrite are used for all I/O, their	55	means characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	56	treatment of characters applies to this module as well.
57		57
		58	At the very minimum, you should specify C<fh> or C<connect>, and the
		59	C<on_error> callback.
		60
58	All callbacks will be invoked with the handle object as their first	61	All callbacks will be invoked with the handle object as their first
59	argument.	62	argument.
60		63
61	=head1 METHODS	64	=head1 METHODS
62		65
63	=over 4	66	=over 4
64		67
65	=item B<new (%args)>	68	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
66		69
67	The constructor supports these arguments (all as key => value pairs).	70	The constructor supports these arguments (all as C<< key => value >> pairs).
68		71
69	=over 4	72	=over 4
70		73
71	=item fh => $filehandle [MANDATORY]	74	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
72		75
73	The filehandle this L<AnyEvent::Handle> object will operate on.	76	The filehandle this L<AnyEvent::Handle> object will operate on.
74
75	NOTE: The filehandle will be set to non-blocking (using	77	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	78	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		79	that mode.
77		80
		81	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		82
		83	Try to connect to the specified host and service (port), using
		84	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		85	default C<peername>.
		86
		87	You have to specify either this parameter, or C<fh>, above.
		88
		89	It is possible to push requests on the read and write queues, and modify
		90	properties of the stream, even while AnyEvent::Handle is connecting.
		91
		92	When this parameter is specified, then the C<on_prepare>,
		93	C<on_connect_error> and C<on_connect> callbacks will be called under the
		94	appropriate circumstances:
		95
		96	=over 4
		97
78	=item on_eof => $cb->($handle)	98	=item on_prepare => $cb->($handle)
79		99
80	Set the callback to be called when an end-of-file condition is detected,	100	This (rarely used) callback is called before a new connection is
81	i.e. in the case of a socket, when the other side has closed the	101	attempted, but after the file handle has been created. It could be used to
82	connection cleanly.	102	prepare the file handle with parameters required for the actual connect
		103	(as opposed to settings that can be changed when the connection is already
		104	established).
83		105
84	While not mandatory, it is I<highly> recommended to set an eof callback,	106	The return value of this callback should be the connect timeout value in
85	otherwise you might end up with a closed socket while you are still	107	seconds (or C<0>, or C<undef>, or the empty list, to indicate the default
86	waiting for data.	108	timeout is to be used).
87		109
88	If an EOF condition has been detected but no C<on_eof> callback has been	110	=item on_connect => $cb->($handle, $host, $port, $retry->())
89	set, then a fatal error will be raised with C<$!> set to <0>.
90		111
		112	This callback is called when a connection has been successfully established.
		113
		114	The actual numeric host and port (the socket peername) are passed as
		115	parameters, together with a retry callback.
		116
		117	When, for some reason, the handle is not acceptable, then calling
		118	C<$retry> will continue with the next conenction target (in case of
		119	multi-homed hosts or SRV records there can be multiple connection
		120	endpoints). When it is called then the read and write queues, eof status,
		121	tls status and similar properties of the handle are being reset.
		122
		123	In most cases, ignoring the C<$retry> parameter is the way to go.
		124
		125	=item on_connect_error => $cb->($handle, $message)
		126
		127	This callback is called when the conenction could not be
		128	established. C<$!> will contain the relevant error code, and C<$message> a
		129	message describing it (usually the same as C<"$!">).
		130
		131	If this callback isn't specified, then C<on_error> will be called with a
		132	fatal error instead.
		133
		134	=back
		135
91	=item on_error => $cb->($handle, $fatal)	136	=item on_error => $cb->($handle, $fatal, $message)
92		137
93	This is the error callback, which is called when, well, some error	138	This is the error callback, which is called when, well, some error
94	occured, such as not being able to resolve the hostname, failure to	139	occured, such as not being able to resolve the hostname, failure to
95	connect or a read error.	140	connect or a read error.
96		141
97	Some errors are fatal (which is indicated by C<$fatal> being true). On	142	Some errors are fatal (which is indicated by C<$fatal> being true). On
98	fatal errors the handle object will be shut down and will not be	143	fatal errors the handle object will be destroyed (by a call to C<< ->
		144	destroy >>) after invoking the error callback (which means you are free to
		145	examine the handle object). Examples of fatal errors are an EOF condition
		146	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		147	cases where the other side can close the connection at their will it is
		148	often easiest to not report C<EPIPE> errors in this callback.
		149
		150	AnyEvent::Handle tries to find an appropriate error code for you to check
		151	against, but in some cases (TLS errors), this does not work well. It is
		152	recommended to always output the C<$message> argument in human-readable
		153	error messages (it's usually the same as C<"$!">).
		154
99	usable. Non-fatal errors can be retried by simply returning, but it is	155	Non-fatal errors can be retried by simply returning, but it is recommended
100	recommended to simply ignore this parameter and instead abondon the handle	156	to simply ignore this parameter and instead abondon the handle object
101	object when this callback is invoked.	157	when this callback is invoked. Examples of non-fatal errors are timeouts
		158	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
102		159
103	On callback entrance, the value of C<$!> contains the operating system	160	On callback entrance, the value of C<$!> contains the operating system
104	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	161	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		162	C<EPROTO>).
105		163
106	While not mandatory, it is I<highly> recommended to set this callback, as	164	While not mandatory, it is I<highly> recommended to set this callback, as
107	you will not be notified of errors otherwise. The default simply calls	165	you will not be notified of errors otherwise. The default simply calls
108	C<croak>.	166	C<croak>.
109		167
…		…
113	and no read request is in the queue (unlike read queue callbacks, this	171	and no read request is in the queue (unlike read queue callbacks, this
114	callback will only be called when at least one octet of data is in the	172	callback will only be called when at least one octet of data is in the
115	read buffer).	173	read buffer).
116		174
117	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	175	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
118	method or access the C<$handle->{rbuf}> member directly.	176	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		177	must not enlarge or modify the read buffer, you can only remove data at
		178	the beginning from it.
119		179
120	When an EOF condition is detected then AnyEvent::Handle will first try to	180	When an EOF condition is detected then AnyEvent::Handle will first try to
121	feed all the remaining data to the queued callbacks and C<on_read> before	181	feed all the remaining data to the queued callbacks and C<on_read> before
122	calling the C<on_eof> callback. If no progress can be made, then a fatal	182	calling the C<on_eof> callback. If no progress can be made, then a fatal
123	error will be raised (with C<$!> set to C<EPIPE>).	183	error will be raised (with C<$!> set to C<EPIPE>).
		184
		185	Note that, unlike requests in the read queue, an C<on_read> callback
		186	doesn't mean you I<require> some data: if there is an EOF and there
		187	are outstanding read requests then an error will be flagged. With an
		188	C<on_read> callback, the C<on_eof> callback will be invoked.
		189
		190	=item on_eof => $cb->($handle)
		191
		192	Set the callback to be called when an end-of-file condition is detected,
		193	i.e. in the case of a socket, when the other side has closed the
		194	connection cleanly, and there are no outstanding read requests in the
		195	queue (if there are read requests, then an EOF counts as an unexpected
		196	connection close and will be flagged as an error).
		197
		198	For sockets, this just means that the other side has stopped sending data,
		199	you can still try to write data, and, in fact, one can return from the EOF
		200	callback and continue writing data, as only the read part has been shut
		201	down.
		202
		203	If an EOF condition has been detected but no C<on_eof> callback has been
		204	set, then a fatal error will be raised with C<$!> set to <0>.
124		205
125	=item on_drain => $cb->($handle)	206	=item on_drain => $cb->($handle)
126		207
127	This sets the callback that is called when the write buffer becomes empty	208	This sets the callback that is called when the write buffer becomes empty
128	(or when the callback is set and the buffer is empty already).	209	(or when the callback is set and the buffer is empty already).
…		…
138	=item timeout => $fractional_seconds	219	=item timeout => $fractional_seconds
139		220
140	If non-zero, then this enables an "inactivity" timeout: whenever this many	221	If non-zero, then this enables an "inactivity" timeout: whenever this many
141	seconds pass without a successful read or write on the underlying file	222	seconds pass without a successful read or write on the underlying file
142	handle, the C<on_timeout> callback will be invoked (and if that one is	223	handle, the C<on_timeout> callback will be invoked (and if that one is
143	missing, an C<ETIMEDOUT> error will be raised).	224	missing, a non-fatal C<ETIMEDOUT> error will be raised).
144		225
145	Note that timeout processing is also active when you currently do not have	226	Note that timeout processing is also active when you currently do not have
146	any outstanding read or write requests: If you plan to keep the connection	227	any outstanding read or write requests: If you plan to keep the connection
147	idle then you should disable the timout temporarily or ignore the timeout	228	idle then you should disable the timout temporarily or ignore the timeout
148	in the C<on_timeout> callback.	229	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		230	restart the timeout.
149		231
150	Zero (the default) disables this timeout.	232	Zero (the default) disables this timeout.
151		233
152	=item on_timeout => $cb->($handle)	234	=item on_timeout => $cb->($handle)
153		235
…		…
157		239
158	=item rbuf_max => <bytes>	240	=item rbuf_max => <bytes>
159		241
160	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	242	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
161	when the read buffer ever (strictly) exceeds this size. This is useful to	243	when the read buffer ever (strictly) exceeds this size. This is useful to
162	avoid denial-of-service attacks.	244	avoid some forms of denial-of-service attacks.
163		245
164	For example, a server accepting connections from untrusted sources should	246	For example, a server accepting connections from untrusted sources should
165	be configured to accept only so-and-so much data that it cannot act on	247	be configured to accept only so-and-so much data that it cannot act on
166	(for example, when expecting a line, an attacker could send an unlimited	248	(for example, when expecting a line, an attacker could send an unlimited
167	amount of data without a callback ever being called as long as the line	249	amount of data without a callback ever being called as long as the line
168	isn't finished).	250	isn't finished).
169		251
170	=item autocork => <boolean>	252	=item autocork => <boolean>
171		253
172	When disabled (the default), then C<push_write> will try to immediately	254	When disabled (the default), then C<push_write> will try to immediately
173	write the data to the handle if possible. This avoids having to register	255	write the data to the handle, if possible. This avoids having to register
174	a write watcher and wait for the next event loop iteration, but can be	256	a write watcher and wait for the next event loop iteration, but can
175	inefficient if you write multiple small chunks (this disadvantage is	257	be inefficient if you write multiple small chunks (on the wire, this
176	usually avoided by your kernel's nagle algorithm, see C<low_delay>).	258	disadvantage is usually avoided by your kernel's nagle algorithm, see
		259	C<no_delay>, but this option can save costly syscalls).
177		260
178	When enabled, then writes will always be queued till the next event loop	261	When enabled, then writes will always be queued till the next event loop
179	iteration. This is efficient when you do many small writes per iteration,	262	iteration. This is efficient when you do many small writes per iteration,
180	but less efficient when you do a single write only.	263	but less efficient when you do a single write only per iteration (or when
		264	the write buffer often is full). It also increases write latency.
181		265
182	=item no_delay => <boolean>	266	=item no_delay => <boolean>
183		267
184	When doing small writes on sockets, your operating system kernel might	268	When doing small writes on sockets, your operating system kernel might
185	wait a bit for more data before actually sending it out. This is called	269	wait a bit for more data before actually sending it out. This is called
186	the Nagle algorithm, and usually it is beneficial.	270	the Nagle algorithm, and usually it is beneficial.
187		271
188	In some situations you want as low a delay as possible, which cna be	272	In some situations you want as low a delay as possible, which can be
189	accomplishd by setting this option to true.	273	accomplishd by setting this option to a true value.
190		274
191	The default is your opertaing system's default behaviour, this option	275	The default is your opertaing system's default behaviour (most likely
192	explicitly enables or disables it, if possible.	276	enabled), this option explicitly enables or disables it, if possible.
193		277
194	=item read_size => <bytes>	278	=item read_size => <bytes>
195		279
196	The default read block size (the amount of bytes this module will try to read	280	The default read block size (the amount of bytes this module will
197	during each (loop iteration). Default: C<8192>.	281	try to read during each loop iteration, which affects memory
		282	requirements). Default: C<8192>.
198		283
199	=item low_water_mark => <bytes>	284	=item low_water_mark => <bytes>
200		285
201	Sets the amount of bytes (default: C<0>) that make up an "empty" write	286	Sets the amount of bytes (default: C<0>) that make up an "empty" write
202	buffer: If the write reaches this size or gets even samller it is	287	buffer: If the write reaches this size or gets even samller it is
203	considered empty.	288	considered empty.
204		289
		290	Sometimes it can be beneficial (for performance reasons) to add data to
		291	the write buffer before it is fully drained, but this is a rare case, as
		292	the operating system kernel usually buffers data as well, so the default
		293	is good in almost all cases.
		294
205	=item linger => <seconds>	295	=item linger => <seconds>
206		296
207	If non-zero (default: C<3600>), then the destructor of the	297	If non-zero (default: C<3600>), then the destructor of the
208	AnyEvent::Handle object will check wether there is still outstanding write	298	AnyEvent::Handle object will check whether there is still outstanding
209	data and will install a watcher that will write out this data. No errors	299	write data and will install a watcher that will write this data to the
210	will be reported (this mostly matches how the operating system treats	300	socket. No errors will be reported (this mostly matches how the operating
211	outstanding data at socket close time).	301	system treats outstanding data at socket close time).
212		302
213	This will not work for partial TLS data that could not yet been	303	This will not work for partial TLS data that could not be encoded
214	encoded. This data will be lost.	304	yet. This data will be lost. Calling the C<stoptls> method in time might
		305	help.
		306
		307	=item peername => $string
		308
		309	A string used to identify the remote site - usually the DNS hostname
		310	(I<not> IDN!) used to create the connection, rarely the IP address.
		311
		312	Apart from being useful in error messages, this string is also used in TLS
		313	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		314	verification will be skipped when C<peername> is not specified or
		315	C<undef>.
215		316
216	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	317	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
217		318
218	When this parameter is given, it enables TLS (SSL) mode, that means it	319	When this parameter is given, it enables TLS (SSL) mode, that means
219	will start making tls handshake and will transparently encrypt/decrypt	320	AnyEvent will start a TLS handshake as soon as the conenction has been
220	data.	321	established and will transparently encrypt/decrypt data afterwards.
		322
		323	All TLS protocol errors will be signalled as C<EPROTO>, with an
		324	appropriate error message.
221		325
222	TLS mode requires Net::SSLeay to be installed (it will be loaded	326	TLS mode requires Net::SSLeay to be installed (it will be loaded
223	automatically when you try to create a TLS handle).	327	automatically when you try to create a TLS handle): this module doesn't
		328	have a dependency on that module, so if your module requires it, you have
		329	to add the dependency yourself.
224		330
225	For the TLS server side, use C<accept>, and for the TLS client side of a	331	Unlike TCP, TLS has a server and client side: for the TLS server side, use
226	connection, use C<connect> mode.	332	C<accept>, and for the TLS client side of a connection, use C<connect>
		333	mode.
227		334
228	You can also provide your own TLS connection object, but you have	335	You can also provide your own TLS connection object, but you have
229	to make sure that you call either C<Net::SSLeay::set_connect_state>	336	to make sure that you call either C<Net::SSLeay::set_connect_state>
230	or C<Net::SSLeay::set_accept_state> on it before you pass it to	337	or C<Net::SSLeay::set_accept_state> on it before you pass it to
231	AnyEvent::Handle.	338	AnyEvent::Handle. Also, this module will take ownership of this connection
		339	object.
232		340
		341	At some future point, AnyEvent::Handle might switch to another TLS
		342	implementation, then the option to use your own session object will go
		343	away.
		344
		345	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		346	passing in the wrong integer will lead to certain crash. This most often
		347	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		348	segmentation fault.
		349
233	See the C<starttls> method if you need to start TLS negotiation later.	350	See the C<< ->starttls >> method for when need to start TLS negotiation later.
234		351
235	=item tls_ctx => $ssl_ctx	352	=item tls_ctx => $anyevent_tls
236		353
237	Use the given Net::SSLeay::CTX object to create the new TLS connection	354	Use the given C<AnyEvent::TLS> object to create the new TLS connection
238	(unless a connection object was specified directly). If this parameter is	355	(unless a connection object was specified directly). If this parameter is
239	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	356	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
240		357
		358	Instead of an object, you can also specify a hash reference with C<< key
		359	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		360	new TLS context object.
		361
		362	=item on_starttls => $cb->($handle, $success[, $error_message])
		363
		364	This callback will be invoked when the TLS/SSL handshake has finished. If
		365	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		366	(C<on_stoptls> will not be called in this case).
		367
		368	The session in C<< $handle->{tls} >> can still be examined in this
		369	callback, even when the handshake was not successful.
		370
		371	TLS handshake failures will not cause C<on_error> to be invoked when this
		372	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		373
		374	Without this callback, handshake failures lead to C<on_error> being
		375	called, as normal.
		376
		377	Note that you cannot call C<starttls> right again in this callback. If you
		378	need to do that, start an zero-second timer instead whose callback can
		379	then call C<< ->starttls >> again.
		380
		381	=item on_stoptls => $cb->($handle)
		382
		383	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		384	set, then it will be invoked after freeing the TLS session. If it is not,
		385	then a TLS shutdown condition will be treated like a normal EOF condition
		386	on the handle.
		387
		388	The session in C<< $handle->{tls} >> can still be examined in this
		389	callback.
		390
		391	This callback will only be called on TLS shutdowns, not when the
		392	underlying handle signals EOF.
		393
241	=item json => JSON or JSON::XS object	394	=item json => JSON or JSON::XS object
242		395
243	This is the json coder object used by the C<json> read and write types.	396	This is the json coder object used by the C<json> read and write types.
244		397
245	If you don't supply it, then AnyEvent::Handle will create and use a	398	If you don't supply it, then AnyEvent::Handle will create and use a
246	suitable one, which will write and expect UTF-8 encoded JSON texts.	399	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		400	texts.
247		401
248	Note that you are responsible to depend on the JSON module if you want to	402	Note that you are responsible to depend on the JSON module if you want to
249	use this functionality, as AnyEvent does not have a dependency itself.	403	use this functionality, as AnyEvent does not have a dependency itself.
250		404
251	=item filter_r => $cb
252
253	=item filter_w => $cb
254
255	These exist, but are undocumented at this time.
256
257	=back	405	=back
258		406
259	=cut	407	=cut
260		408
261	sub new {	409	sub new {
262	my $class = shift;	410	my $class = shift;
263
264	my $self = bless { @_ }, $class;	411	my $self = bless { @_ }, $class;
265		412
266	$self->{fh} or Carp::croak "mandatory argument fh is missing";	413	if ($self->{fh}) {
		414	$self->_start;
		415	return unless $self->{fh}; # could be gone by now
		416
		417	} elsif ($self->{connect}) {
		418	require AnyEvent::Socket;
		419
		420	$self->{peername} = $self->{connect}[0]
		421	unless exists $self->{peername};
		422
		423	$self->{_skip_drain_rbuf} = 1;
		424
		425	{
		426	Scalar::Util::weaken (my $self = $self);
		427
		428	$self->{_connect} =
		429	AnyEvent::Socket::tcp_connect (
		430	$self->{connect}[0],
		431	$self->{connect}[1],
		432	sub {
		433	my ($fh, $host, $port, $retry) = @_;
		434
		435	if ($fh) {
		436	$self->{fh} = $fh;
		437
		438	delete $self->{_skip_drain_rbuf};
		439	$self->_start;
		440
		441	$self->{on_connect}
		442	and $self->{on_connect}($self, $host, $port, sub {
		443	delete @$self{qw(fh _tw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		444	$self->{_skip_drain_rbuf} = 1;
		445	&$retry;
		446	});
		447
		448	} else {
		449	if ($self->{on_connect_error}) {
		450	$self->{on_connect_error}($self, "$!");
		451	$self->destroy;
		452	} else {
		453	$self->_error ($!, 1);
		454	}
		455	}
		456	},
		457	sub {
		458	local $self->{fh} = $_[0];
		459
		460	$self->{on_prepare}
		461	? $self->{on_prepare}->($self)
		462	: ()
		463	}
		464	);
		465	}
		466
		467	} else {
		468	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		469	}
		470
		471	$self
		472	}
		473
		474	sub _start {
		475	my ($self) = @_;
267		476
268	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	477	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
269
270	if ($self->{tls}) {
271	require Net::SSLeay;
272	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});
273	}
274		478
275	$self->{_activity} = AnyEvent->now;	479	$self->{_activity} = AnyEvent->now;
276	$self->_timeout;	480	$self->_timeout;
277		481
278	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};
279	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};	482	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
280		483
		484	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
		485	if $self->{tls};
		486
		487	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
		488
281	$self->start_read	489	$self->start_read
282	if $self->{on_read};	490	if $self->{on_read} || @{ $self->{_queue} };
283		491
284	$self	492	$self->_drain_wbuf;
285	}	493	}
286		494
287	sub _shutdown {	495	#sub _shutdown {
288	my ($self) = @_;	496	# my ($self) = @_;
289		497	#
290	delete $self->{_tw};	498	# delete @$self{qw(_tw _rw _ww fh wbuf on_read _queue)};
291	delete $self->{_rw};	499	# $self->{_eof} = 1; # tell starttls et. al to stop trying
292	delete $self->{_ww};	500	#
293	delete $self->{fh};	501	# &_freetls;
294		502	#}
295	$self->stoptls;
296	}
297		503
298	sub _error {	504	sub _error {
299	my ($self, $errno, $fatal) = @_;	505	my ($self, $errno, $fatal, $message) = @_;
300
301	$self->_shutdown
302	if $fatal;
303		506
304	$! = $errno;	507	$! = $errno;
		508	$message ||= "$!";
305		509
306	if ($self->{on_error}) {	510	if ($self->{on_error}) {
307	$self->{on_error}($self, $fatal);	511	$self->{on_error}($self, $fatal, $message);
308	} else {	512	$self->destroy if $fatal;
		513	} elsif ($self->{fh}) {
		514	$self->destroy;
309	Carp::croak "AnyEvent::Handle uncaught error: $!";	515	Carp::croak "AnyEvent::Handle uncaught error: $message";
310	}	516	}
311	}	517	}
312		518
313	=item $fh = $handle->fh	519	=item $fh = $handle->fh
314		520
315	This method returns the file handle of the L<AnyEvent::Handle> object.	521	This method returns the file handle used to create the L<AnyEvent::Handle> object.
316		522
317	=cut	523	=cut
318		524
319	sub fh { $_[0]{fh} }	525	sub fh { $_[0]{fh} }
320		526
…		…
338	$_[0]{on_eof} = $_[1];	544	$_[0]{on_eof} = $_[1];
339	}	545	}
340		546
341	=item $handle->on_timeout ($cb)	547	=item $handle->on_timeout ($cb)
342		548
343	Replace the current C<on_timeout> callback, or disables the callback	549	Replace the current C<on_timeout> callback, or disables the callback (but
344	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor	550	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
345	argument.	551	argument and method.
346		552
347	=cut	553	=cut
348		554
349	sub on_timeout {	555	sub on_timeout {
350	$_[0]{on_timeout} = $_[1];	556	$_[0]{on_timeout} = $_[1];
351	}	557	}
352		558
353	=item $handle->autocork ($boolean)	559	=item $handle->autocork ($boolean)
354		560
355	Enables or disables the current autocork behaviour (see C<autocork>	561	Enables or disables the current autocork behaviour (see C<autocork>
356	constructor argument).	562	constructor argument). Changes will only take effect on the next write.
357		563
358	=cut	564	=cut
		565
		566	sub autocork {
		567	$_[0]{autocork} = $_[1];
		568	}
359		569
360	=item $handle->no_delay ($boolean)	570	=item $handle->no_delay ($boolean)
361		571
362	Enables or disables the C<no_delay> setting (see constructor argument of	572	Enables or disables the C<no_delay> setting (see constructor argument of
363	the same name for details).	573	the same name for details).
…		…
367	sub no_delay {	577	sub no_delay {
368	$_[0]{no_delay} = $_[1];	578	$_[0]{no_delay} = $_[1];
369		579
370	eval {	580	eval {
371	local $SIG{__DIE__};	581	local $SIG{__DIE__};
372	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	582	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1]
		583	if $_[0]{fh};
373	};	584	};
		585	}
		586
		587	=item $handle->on_starttls ($cb)
		588
		589	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		590
		591	=cut
		592
		593	sub on_starttls {
		594	$_[0]{on_starttls} = $_[1];
		595	}
		596
		597	=item $handle->on_stoptls ($cb)
		598
		599	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		600
		601	=cut
		602
		603	sub on_starttls {
		604	$_[0]{on_stoptls} = $_[1];
		605	}
		606
		607	=item $handle->rbuf_max ($max_octets)
		608
		609	Configures the C<rbuf_max> setting (C<undef> disables it).
		610
		611	=cut
		612
		613	sub rbuf_max {
		614	$_[0]{rbuf_max} = $_[1];
374	}	615	}
375		616
376	#############################################################################	617	#############################################################################
377		618
378	=item $handle->timeout ($seconds)	619	=item $handle->timeout ($seconds)
…		…
391	# reset the timeout watcher, as neccessary	632	# reset the timeout watcher, as neccessary
392	# also check for time-outs	633	# also check for time-outs
393	sub _timeout {	634	sub _timeout {
394	my ($self) = @_;	635	my ($self) = @_;
395		636
396	if ($self->{timeout}) {	637	if ($self->{timeout} && $self->{fh}) {
397	my $NOW = AnyEvent->now;	638	my $NOW = AnyEvent->now;
398		639
399	# when would the timeout trigger?	640	# when would the timeout trigger?
400	my $after = $self->{_activity} + $self->{timeout} - $NOW;	641	my $after = $self->{_activity} + $self->{timeout} - $NOW;
401		642
…		…
404	$self->{_activity} = $NOW;	645	$self->{_activity} = $NOW;
405		646
406	if ($self->{on_timeout}) {	647	if ($self->{on_timeout}) {
407	$self->{on_timeout}($self);	648	$self->{on_timeout}($self);
408	} else {	649	} else {
409	$self->_error (&Errno::ETIMEDOUT);	650	$self->_error (Errno::ETIMEDOUT);
410	}	651	}
411		652
412	# callback could have changed timeout value, optimise	653	# callback could have changed timeout value, optimise
413	return unless $self->{timeout};	654	return unless $self->{timeout};
414		655
…		…
456	my ($self, $cb) = @_;	697	my ($self, $cb) = @_;
457		698
458	$self->{on_drain} = $cb;	699	$self->{on_drain} = $cb;
459		700
460	$cb->($self)	701	$cb->($self)
461	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	702	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
462	}	703	}
463		704
464	=item $handle->push_write ($data)	705	=item $handle->push_write ($data)
465		706
466	Queues the given scalar to be written. You can push as much data as you	707	Queues the given scalar to be written. You can push as much data as you
…		…
477	Scalar::Util::weaken $self;	718	Scalar::Util::weaken $self;
478		719
479	my $cb = sub {	720	my $cb = sub {
480	my $len = syswrite $self->{fh}, $self->{wbuf};	721	my $len = syswrite $self->{fh}, $self->{wbuf};
481		722
482	if ($len >= 0) {	723	if (defined $len) {
483	substr $self->{wbuf}, 0, $len, "";	724	substr $self->{wbuf}, 0, $len, "";
484		725
485	$self->{_activity} = AnyEvent->now;	726	$self->{_activity} = AnyEvent->now;
486		727
487	$self->{on_drain}($self)	728	$self->{on_drain}($self)
488	if $self->{low_water_mark} >= length $self->{wbuf}	729	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
489	&& $self->{on_drain};	730	&& $self->{on_drain};
490		731
491	delete $self->{_ww} unless length $self->{wbuf};	732	delete $self->{_ww} unless length $self->{wbuf};
492	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	733	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
493	$self->_error ($!, 1);	734	$self->_error ($!, 1);
…		…
517		758
518	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	759	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
519	->($self, @_);	760	->($self, @_);
520	}	761	}
521		762
522	if ($self->{filter_w}) {	763	if ($self->{tls}) {
523	$self->{filter_w}($self, \$_[0]);	764	$self->{_tls_wbuf} .= $_[0];
		765	&_dotls ($self) if $self->{fh};
524	} else {	766	} else {
525	$self->{wbuf} .= $_[0];	767	$self->{wbuf} .= $_[0];
526	$self->_drain_wbuf;	768	$self->_drain_wbuf if $self->{fh};
527	}	769	}
528	}	770	}
529		771
530	=item $handle->push_write (type => @args)	772	=item $handle->push_write (type => @args)
531		773
…		…
545	=cut	787	=cut
546		788
547	register_write_type netstring => sub {	789	register_write_type netstring => sub {
548	my ($self, $string) = @_;	790	my ($self, $string) = @_;
549		791
550	sprintf "%d:%s,", (length $string), $string	792	(length $string) . ":$string,"
551	};	793	};
552		794
553	=item packstring => $format, $data	795	=item packstring => $format, $data
554		796
555	An octet string prefixed with an encoded length. The encoding C<$format>	797	An octet string prefixed with an encoded length. The encoding C<$format>
…		…
620		862
621	pack "w/a*", Storable::nfreeze ($ref)	863	pack "w/a*", Storable::nfreeze ($ref)
622	};	864	};
623		865
624	=back	866	=back
		867
		868	=item $handle->push_shutdown
		869
		870	Sometimes you know you want to close the socket after writing your data
		871	before it was actually written. One way to do that is to replace your
		872	C<on_drain> handler by a callback that shuts down the socket (and set
		873	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		874	replaces the C<on_drain> callback with:
		875
		876	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		877
		878	This simply shuts down the write side and signals an EOF condition to the
		879	the peer.
		880
		881	You can rely on the normal read queue and C<on_eof> handling
		882	afterwards. This is the cleanest way to close a connection.
		883
		884	=cut
		885
		886	sub push_shutdown {
		887	my ($self) = @_;
		888
		889	delete $self->{low_water_mark};
		890	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		891	}
625		892
626	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	893	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
627		894
628	This function (not method) lets you add your own types to C<push_write>.	895	This function (not method) lets you add your own types to C<push_write>.
629	Whenever the given C<type> is used, C<push_write> will invoke the code	896	Whenever the given C<type> is used, C<push_write> will invoke the code
…		…
723	=cut	990	=cut
724		991
725	sub _drain_rbuf {	992	sub _drain_rbuf {
726	my ($self) = @_;	993	my ($self) = @_;
727		994
		995	# avoid recursion
		996	return if $self->{_skip_drain_rbuf};
728	local $self->{_in_drain} = 1;	997	local $self->{_skip_drain_rbuf} = 1;
729
730	if (
731	defined $self->{rbuf_max}
732	&& $self->{rbuf_max} < length $self->{rbuf}
733	) {
734	return $self->_error (&Errno::ENOSPC, 1);
735	}
736		998
737	while () {	999	while () {
		1000	# we need to use a separate tls read buffer, as we must not receive data while
		1001	# we are draining the buffer, and this can only happen with TLS.
		1002	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1003	if exists $self->{_tls_rbuf};
		1004
738	my $len = length $self->{rbuf};	1005	my $len = length $self->{rbuf};
739		1006
740	if (my $cb = shift @{ $self->{_queue} }) {	1007	if (my $cb = shift @{ $self->{_queue} }) {
741	unless ($cb->($self)) {	1008	unless ($cb->($self)) {
742	if ($self->{_eof}) {	1009	# no progress can be made
743	# no progress can be made (not enough data and no data forthcoming)	1010	# (not enough data and no data forthcoming)
744	$self->_error (&Errno::EPIPE, 1), last;	1011	$self->_error (Errno::EPIPE, 1), return
745	}	1012	if $self->{_eof};
746		1013
747	unshift @{ $self->{_queue} }, $cb;	1014	unshift @{ $self->{_queue} }, $cb;
748	last;	1015	last;
749	}	1016	}
750	} elsif ($self->{on_read}) {	1017	} elsif ($self->{on_read}) {
…		…
757	&& !@{ $self->{_queue} } # and the queue is still empty	1024	&& !@{ $self->{_queue} } # and the queue is still empty
758	&& $self->{on_read} # but we still have on_read	1025	&& $self->{on_read} # but we still have on_read
759	) {	1026	) {
760	# no further data will arrive	1027	# no further data will arrive
761	# so no progress can be made	1028	# so no progress can be made
762	$self->_error (&Errno::EPIPE, 1), last	1029	$self->_error (Errno::EPIPE, 1), return
763	if $self->{_eof};	1030	if $self->{_eof};
764		1031
765	last; # more data might arrive	1032	last; # more data might arrive
766	}	1033	}
767	} else {	1034	} else {
768	# read side becomes idle	1035	# read side becomes idle
769	delete $self->{_rw};	1036	delete $self->{_rw} unless $self->{tls};
770	last;	1037	last;
771	}	1038	}
772	}	1039	}
773		1040
774	if ($self->{_eof}) {	1041	if ($self->{_eof}) {
775	if ($self->{on_eof}) {	1042	$self->{on_eof}
776	$self->{on_eof}($self)	1043	? $self->{on_eof}($self)
777	} else {	1044	: $self->_error (0, 1, "Unexpected end-of-file");
778	$self->_error (0, 1);	1045
779	}	1046	return;
		1047	}
		1048
		1049	if (
		1050	defined $self->{rbuf_max}
		1051	&& $self->{rbuf_max} < length $self->{rbuf}
		1052	) {
		1053	$self->_error (Errno::ENOSPC, 1), return;
780	}	1054	}
781		1055
782	# may need to restart read watcher	1056	# may need to restart read watcher
783	unless ($self->{_rw}) {	1057	unless ($self->{_rw}) {
784	$self->start_read	1058	$self->start_read
…		…
796		1070
797	sub on_read {	1071	sub on_read {
798	my ($self, $cb) = @_;	1072	my ($self, $cb) = @_;
799		1073
800	$self->{on_read} = $cb;	1074	$self->{on_read} = $cb;
801	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1075	$self->_drain_rbuf if $cb;
802	}	1076	}
803		1077
804	=item $handle->rbuf	1078	=item $handle->rbuf
805		1079
806	Returns the read buffer (as a modifiable lvalue).	1080	Returns the read buffer (as a modifiable lvalue).
807		1081
808	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1082	You can access the read buffer directly as the C<< ->{rbuf} >>
809	you want.	1083	member, if you want. However, the only operation allowed on the
		1084	read buffer (apart from looking at it) is removing data from its
		1085	beginning. Otherwise modifying or appending to it is not allowed and will
		1086	lead to hard-to-track-down bugs.
810		1087
811	NOTE: The read buffer should only be used or modified if the C<on_read>,	1088	NOTE: The read buffer should only be used or modified if the C<on_read>,
812	C<push_read> or C<unshift_read> methods are used. The other read methods	1089	C<push_read> or C<unshift_read> methods are used. The other read methods
813	automatically manage the read buffer.	1090	automatically manage the read buffer.
814		1091
…		…
855	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1132	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")
856	->($self, $cb, @_);	1133	->($self, $cb, @_);
857	}	1134	}
858		1135
859	push @{ $self->{_queue} }, $cb;	1136	push @{ $self->{_queue} }, $cb;
860	$self->_drain_rbuf unless $self->{_in_drain};	1137	$self->_drain_rbuf;
861	}	1138	}
862		1139
863	sub unshift_read {	1140	sub unshift_read {
864	my $self = shift;	1141	my $self = shift;
865	my $cb = pop;	1142	my $cb = pop;
…		…
871	->($self, $cb, @_);	1148	->($self, $cb, @_);
872	}	1149	}
873		1150
874		1151
875	unshift @{ $self->{_queue} }, $cb;	1152	unshift @{ $self->{_queue} }, $cb;
876	$self->_drain_rbuf unless $self->{_in_drain};	1153	$self->_drain_rbuf;
877	}	1154	}
878		1155
879	=item $handle->push_read (type => @args, $cb)	1156	=item $handle->push_read (type => @args, $cb)
880		1157
881	=item $handle->unshift_read (type => @args, $cb)	1158	=item $handle->unshift_read (type => @args, $cb)
…		…
1014	return 1;	1291	return 1;
1015	}	1292	}
1016		1293
1017	# reject	1294	# reject
1018	if ($reject && $$rbuf =~ $reject) {	1295	if ($reject && $$rbuf =~ $reject) {
1019	$self->_error (&Errno::EBADMSG);	1296	$self->_error (Errno::EBADMSG);
1020	}	1297	}
1021		1298
1022	# skip	1299	# skip
1023	if ($skip && $$rbuf =~ $skip) {	1300	if ($skip && $$rbuf =~ $skip) {
1024	$data .= substr $$rbuf, 0, $+[0], "";	1301	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1040	my ($self, $cb) = @_;	1317	my ($self, $cb) = @_;
1041		1318
1042	sub {	1319	sub {
1043	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1320	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1044	if ($_[0]{rbuf} =~ /[^0-9]/) {	1321	if ($_[0]{rbuf} =~ /[^0-9]/) {
1045	$self->_error (&Errno::EBADMSG);	1322	$self->_error (Errno::EBADMSG);
1046	}	1323	}
1047	return;	1324	return;
1048	}	1325	}
1049		1326
1050	my $len = $1;	1327	my $len = $1;
…		…
1053	my $string = $_[1];	1330	my $string = $_[1];
1054	$_[0]->unshift_read (chunk => 1, sub {	1331	$_[0]->unshift_read (chunk => 1, sub {
1055	if ($_[1] eq ",") {	1332	if ($_[1] eq ",") {
1056	$cb->($_[0], $string);	1333	$cb->($_[0], $string);
1057	} else {	1334	} else {
1058	$self->_error (&Errno::EBADMSG);	1335	$self->_error (Errno::EBADMSG);
1059	}	1336	}
1060	});	1337	});
1061	});	1338	});
1062		1339
1063	1	1340	1
…		…
1069	An octet string prefixed with an encoded length. The encoding C<$format>	1346	An octet string prefixed with an encoded length. The encoding C<$format>
1070	uses the same format as a Perl C<pack> format, but must specify a single	1347	uses the same format as a Perl C<pack> format, but must specify a single
1071	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an	1348	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
1072	optional C<!>, C<< < >> or C<< > >> modifier).	1349	optional C<!>, C<< < >> or C<< > >> modifier).
1073		1350
1074	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.	1351	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1352	EPP uses a prefix of C<N> (4 octtes).
1075		1353
1076	Example: read a block of data prefixed by its length in BER-encoded	1354	Example: read a block of data prefixed by its length in BER-encoded
1077	format (very efficient).	1355	format (very efficient).
1078		1356
1079	$handle->push_read (packstring => "w", sub {	1357	$handle->push_read (packstring => "w", sub {
…		…
1109	}	1387	}
1110	};	1388	};
1111		1389
1112	=item json => $cb->($handle, $hash_or_arrayref)	1390	=item json => $cb->($handle, $hash_or_arrayref)
1113		1391
1114	Reads a JSON object or array, decodes it and passes it to the callback.	1392	Reads a JSON object or array, decodes it and passes it to the
		1393	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1115		1394
1116	If a C<json> object was passed to the constructor, then that will be used	1395	If a C<json> object was passed to the constructor, then that will be used
1117	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1396	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1118		1397
1119	This read type uses the incremental parser available with JSON version	1398	This read type uses the incremental parser available with JSON version
…		…
1128	=cut	1407	=cut
1129		1408
1130	register_read_type json => sub {	1409	register_read_type json => sub {
1131	my ($self, $cb) = @_;	1410	my ($self, $cb) = @_;
1132		1411
1133	require JSON;	1412	my $json = $self->{json} ||=
		1413	eval { require JSON::XS; JSON::XS->new->utf8 }
		1414	|| do { require JSON; JSON->new->utf8 };
1134		1415
1135	my $data;	1416	my $data;
1136	my $rbuf = \$self->{rbuf};	1417	my $rbuf = \$self->{rbuf};
1137		1418
1138	my $json = $self->{json} ||= JSON->new->utf8;
1139
1140	sub {	1419	sub {
1141	my $ref = $json->incr_parse ($self->{rbuf});	1420	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1142		1421
1143	if ($ref) {	1422	if ($ref) {
1144	$self->{rbuf} = $json->incr_text;	1423	$self->{rbuf} = $json->incr_text;
1145	$json->incr_text = "";	1424	$json->incr_text = "";
1146	$cb->($self, $ref);	1425	$cb->($self, $ref);
1147		1426
1148	1	1427	1
		1428	} elsif ($@) {
		1429	# error case
		1430	$json->incr_skip;
		1431
		1432	$self->{rbuf} = $json->incr_text;
		1433	$json->incr_text = "";
		1434
		1435	$self->_error (Errno::EBADMSG);
		1436
		1437	()
1149	} else {	1438	} else {
1150	$self->{rbuf} = "";	1439	$self->{rbuf} = "";
		1440
1151	()	1441	()
1152	}	1442	}
1153	}	1443	}
1154	};	1444	};
1155		1445
…		…
1187	# read remaining chunk	1477	# read remaining chunk
1188	$_[0]->unshift_read (chunk => $len, sub {	1478	$_[0]->unshift_read (chunk => $len, sub {
1189	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1479	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1190	$cb->($_[0], $ref);	1480	$cb->($_[0], $ref);
1191	} else {	1481	} else {
1192	$self->_error (&Errno::EBADMSG);	1482	$self->_error (Errno::EBADMSG);
1193	}	1483	}
1194	});	1484	});
1195	}	1485	}
1196		1486
1197	1	1487	1
…		…
1232	Note that AnyEvent::Handle will automatically C<start_read> for you when	1522	Note that AnyEvent::Handle will automatically C<start_read> for you when
1233	you change the C<on_read> callback or push/unshift a read callback, and it	1523	you change the C<on_read> callback or push/unshift a read callback, and it
1234	will automatically C<stop_read> for you when neither C<on_read> is set nor	1524	will automatically C<stop_read> for you when neither C<on_read> is set nor
1235	there are any read requests in the queue.	1525	there are any read requests in the queue.
1236		1526
		1527	These methods will have no effect when in TLS mode (as TLS doesn't support
		1528	half-duplex connections).
		1529
1237	=cut	1530	=cut
1238		1531
1239	sub stop_read {	1532	sub stop_read {
1240	my ($self) = @_;	1533	my ($self) = @_;
1241		1534
1242	delete $self->{_rw};	1535	delete $self->{_rw} unless $self->{tls};
1243	}	1536	}
1244		1537
1245	sub start_read {	1538	sub start_read {
1246	my ($self) = @_;	1539	my ($self) = @_;
1247		1540
1248	unless ($self->{_rw} || $self->{_eof}) {	1541	unless ($self->{_rw} || $self->{_eof}) {
1249	Scalar::Util::weaken $self;	1542	Scalar::Util::weaken $self;
1250		1543
1251	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1544	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {
1252	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1545	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1253	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1546	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
1254		1547
1255	if ($len > 0) {	1548	if ($len > 0) {
1256	$self->{_activity} = AnyEvent->now;	1549	$self->{_activity} = AnyEvent->now;
1257		1550
1258	$self->{filter_r}	1551	if ($self->{tls}) {
1259	? $self->{filter_r}($self, $rbuf)	1552	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1260	: $self->{_in_drain} || $self->_drain_rbuf;	1553
		1554	&_dotls ($self);
		1555	} else {
		1556	$self->_drain_rbuf;
		1557	}
1261		1558
1262	} elsif (defined $len) {	1559	} elsif (defined $len) {
1263	delete $self->{_rw};	1560	delete $self->{_rw};
1264	$self->{_eof} = 1;	1561	$self->{_eof} = 1;
1265	$self->_drain_rbuf unless $self->{_in_drain};	1562	$self->_drain_rbuf;
1266		1563
1267	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1564	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1268	return $self->_error ($!, 1);	1565	return $self->_error ($!, 1);
1269	}	1566	}
1270	});	1567	});
1271	}	1568	}
1272	}	1569	}
1273		1570
		1571	our $ERROR_SYSCALL;
		1572	our $ERROR_WANT_READ;
		1573
		1574	sub _tls_error {
		1575	my ($self, $err) = @_;
		1576
		1577	return $self->_error ($!, 1)
		1578	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1579
		1580	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1581
		1582	# reduce error string to look less scary
		1583	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1584
		1585	if ($self->{_on_starttls}) {
		1586	(delete $self->{_on_starttls})->($self, undef, $err);
		1587	&_freetls;
		1588	} else {
		1589	&_freetls;
		1590	$self->_error (Errno::EPROTO, 1, $err);
		1591	}
		1592	}
		1593
		1594	# poll the write BIO and send the data if applicable
		1595	# also decode read data if possible
		1596	# this is basiclaly our TLS state machine
		1597	# more efficient implementations are possible with openssl,
		1598	# but not with the buggy and incomplete Net::SSLeay.
1274	sub _dotls {	1599	sub _dotls {
1275	my ($self) = @_;	1600	my ($self) = @_;
1276		1601
1277	my $buf;	1602	my $tmp;
1278		1603
1279	if (length $self->{_tls_wbuf}) {	1604	if (length $self->{_tls_wbuf}) {
1280	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1605	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1281	substr $self->{_tls_wbuf}, 0, $len, "";	1606	substr $self->{_tls_wbuf}, 0, $tmp, "";
1282	}	1607	}
1283	}
1284		1608
		1609	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1610	return $self->_tls_error ($tmp)
		1611	if $tmp != $ERROR_WANT_READ
		1612	&& ($tmp != $ERROR_SYSCALL || $!);
		1613	}
		1614
		1615	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1616	unless (length $tmp) {
		1617	$self->{_on_starttls}
		1618	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		1619	&_freetls;
		1620
		1621	if ($self->{on_stoptls}) {
		1622	$self->{on_stoptls}($self);
		1623	return;
		1624	} else {
		1625	# let's treat SSL-eof as we treat normal EOF
		1626	delete $self->{_rw};
		1627	$self->{_eof} = 1;
		1628	}
		1629	}
		1630
		1631	$self->{_tls_rbuf} .= $tmp;
		1632	$self->_drain_rbuf;
		1633	$self->{tls} or return; # tls session might have gone away in callback
		1634	}
		1635
		1636	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
		1637	return $self->_tls_error ($tmp)
		1638	if $tmp != $ERROR_WANT_READ
		1639	&& ($tmp != $ERROR_SYSCALL || $!);
		1640
1285	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1641	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1286	$self->{wbuf} .= $buf;	1642	$self->{wbuf} .= $tmp;
1287	$self->_drain_wbuf;	1643	$self->_drain_wbuf;
1288	}	1644	}
1289		1645
1290	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	1646	$self->{_on_starttls}
1291	if (length $buf) {	1647	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1292	$self->{rbuf} .= $buf;	1648	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1293	$self->_drain_rbuf unless $self->{_in_drain};
1294	} else {
1295	# let's treat SSL-eof as we treat normal EOF
1296	$self->{_eof} = 1;
1297	$self->_shutdown;
1298	return;
1299	}
1300	}
1301
1302	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
1303
1304	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1305	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1306	return $self->_error ($!, 1);
1307	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
1308	return $self->_error (&Errno::EIO, 1);
1309	}
1310
1311	# all others are fine for our purposes
1312	}
1313	}	1649	}
1314		1650
1315	=item $handle->starttls ($tls[, $tls_ctx])	1651	=item $handle->starttls ($tls[, $tls_ctx])
1316		1652
1317	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1653	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1318	object is created, you can also do that at a later time by calling	1654	object is created, you can also do that at a later time by calling
1319	C<starttls>.	1655	C<starttls>.
1320		1656
		1657	Starting TLS is currently an asynchronous operation - when you push some
		1658	write data and then call C<< ->starttls >> then TLS negotiation will start
		1659	immediately, after which the queued write data is then sent.
		1660
1321	The first argument is the same as the C<tls> constructor argument (either	1661	The first argument is the same as the C<tls> constructor argument (either
1322	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1662	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1323		1663
1324	The second argument is the optional C<Net::SSLeay::CTX> object that is	1664	The second argument is the optional C<AnyEvent::TLS> object that is used
1325	used when AnyEvent::Handle has to create its own TLS connection object.	1665	when AnyEvent::Handle has to create its own TLS connection object, or
		1666	a hash reference with C<< key => value >> pairs that will be used to
		1667	construct a new context.
1326		1668
1327	The TLS connection object will end up in C<< $handle->{tls} >> after this	1669	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1328	call and can be used or changed to your liking. Note that the handshake	1670	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1329	might have already started when this function returns.	1671	changed to your liking. Note that the handshake might have already started
		1672	when this function returns.
1330		1673
		1674	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		1675	handshakes on the same stream. Best do not attempt to use the stream after
		1676	stopping TLS.
		1677
1331	=cut	1678	=cut
		1679
		1680	our %TLS_CACHE; #TODO not yet documented, should we?
1332		1681
1333	sub starttls {	1682	sub starttls {
1334	my ($self, $ssl, $ctx) = @_;	1683	my ($self, $tls, $ctx) = @_;
1335		1684
1336	$self->stoptls;	1685	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1686	if $self->{tls};
1337		1687
1338	if ($ssl eq "accept") {	1688	$self->{tls} = $tls;
1339	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1689	$self->{tls_ctx} = $ctx if @_ > 2;
1340	Net::SSLeay::set_accept_state ($ssl);	1690
1341	} elsif ($ssl eq "connect") {	1691	return unless $self->{fh};
1342	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1692
1343	Net::SSLeay::set_connect_state ($ssl);	1693	require Net::SSLeay;
		1694
		1695	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		1696	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1697
		1698	$tls = $self->{tls};
		1699	$ctx = $self->{tls_ctx};
		1700
		1701	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1702
		1703	if ("HASH" eq ref $ctx) {
		1704	require AnyEvent::TLS;
		1705
		1706	if ($ctx->{cache}) {
		1707	my $key = $ctx+0;
		1708	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1709	} else {
		1710	$ctx = new AnyEvent::TLS %$ctx;
		1711	}
		1712	}
1344	}	1713
1345		1714	$self->{tls_ctx} = $ctx || TLS_CTX ();
1346	$self->{tls} = $ssl;	1715	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1347		1716
1348	# basically, this is deep magic (because SSL_read should have the same issues)	1717	# basically, this is deep magic (because SSL_read should have the same issues)
1349	# but the openssl maintainers basically said: "trust us, it just works".	1718	# but the openssl maintainers basically said: "trust us, it just works".
1350	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1719	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1351	# and mismaintained ssleay-module doesn't even offer them).	1720	# and mismaintained ssleay-module doesn't even offer them).
1352	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1721	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1722	#
		1723	# in short: this is a mess.
		1724	#
		1725	# note that we do not try to keep the length constant between writes as we are required to do.
		1726	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1727	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1728	# have identity issues in that area.
1353	Net::SSLeay::CTX_set_mode ($self->{tls},	1729	# Net::SSLeay::CTX_set_mode ($ssl,
1354	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1730	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1355	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1731	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1732	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1356		1733
1357	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1734	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1358	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1735	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1359		1736
		1737	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1738
1360	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1739	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1361		1740
1362	$self->{filter_w} = sub {	1741	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1363	$_[0]{_tls_wbuf} .= ${$_[1]};	1742	if $self->{on_starttls};
1364	&_dotls;	1743
1365	};	1744	&_dotls; # need to trigger the initial handshake
1366	$self->{filter_r} = sub {	1745	$self->start_read; # make sure we actually do read
1367	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1368	&_dotls;
1369	};
1370	}	1746	}
1371		1747
1372	=item $handle->stoptls	1748	=item $handle->stoptls
1373		1749
1374	Destroys the SSL connection, if any. Partial read or write data will be	1750	Shuts down the SSL connection - this makes a proper EOF handshake by
1375	lost.	1751	sending a close notify to the other side, but since OpenSSL doesn't
		1752	support non-blocking shut downs, it is not guarenteed that you can re-use
		1753	the stream afterwards.
1376		1754
1377	=cut	1755	=cut
1378		1756
1379	sub stoptls {	1757	sub stoptls {
1380	my ($self) = @_;	1758	my ($self) = @_;
1381		1759
1382	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1760	if ($self->{tls}) {
		1761	Net::SSLeay::shutdown ($self->{tls});
1383		1762
1384	delete $self->{_rbio};	1763	&_dotls;
1385	delete $self->{_wbio};	1764
1386	delete $self->{_tls_wbuf};	1765	# # we don't give a shit. no, we do, but we can't. no...#d#
1387	delete $self->{filter_r};	1766	# # we, we... have to use openssl :/#d#
1388	delete $self->{filter_w};	1767	# &_freetls;#d#
		1768	}
		1769	}
		1770
		1771	sub _freetls {
		1772	my ($self) = @_;
		1773
		1774	return unless $self->{tls};
		1775
		1776	$self->{tls_ctx}->_put_session (delete $self->{tls})
		1777	if $self->{tls} > 0;
		1778
		1779	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1389	}	1780	}
1390		1781
1391	sub DESTROY {	1782	sub DESTROY {
1392	my $self = shift;	1783	my ($self) = @_;
1393		1784
1394	$self->stoptls;	1785	&_freetls;
1395		1786
1396	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	1787	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1397		1788
1398	if ($linger && length $self->{wbuf}) {	1789	if ($linger && length $self->{wbuf} && $self->{fh}) {
1399	my $fh = delete $self->{fh};	1790	my $fh = delete $self->{fh};
1400	my $wbuf = delete $self->{wbuf};	1791	my $wbuf = delete $self->{wbuf};
1401		1792
1402	my @linger;	1793	my @linger;
1403		1794
…		…
1414	@linger = ();	1805	@linger = ();
1415	});	1806	});
1416	}	1807	}
1417	}	1808	}
1418		1809
		1810	=item $handle->destroy
		1811
		1812	Shuts down the handle object as much as possible - this call ensures that
		1813	no further callbacks will be invoked and as many resources as possible
		1814	will be freed. Any method you will call on the handle object after
		1815	destroying it in this way will be silently ignored (and it will return the
		1816	empty list).
		1817
		1818	Normally, you can just "forget" any references to an AnyEvent::Handle
		1819	object and it will simply shut down. This works in fatal error and EOF
		1820	callbacks, as well as code outside. It does I<NOT> work in a read or write
		1821	callback, so when you want to destroy the AnyEvent::Handle object from
		1822	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		1823	that case.
		1824
		1825	Destroying the handle object in this way has the advantage that callbacks
		1826	will be removed as well, so if those are the only reference holders (as
		1827	is common), then one doesn't need to do anything special to break any
		1828	reference cycles.
		1829
		1830	The handle might still linger in the background and write out remaining
		1831	data, as specified by the C<linger> option, however.
		1832
		1833	=cut
		1834
		1835	sub destroy {
		1836	my ($self) = @_;
		1837
		1838	$self->DESTROY;
		1839	%$self = ();
		1840	bless $self, "AnyEvent::Handle::destroyed";
		1841	}
		1842
		1843	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		1844	#nop
		1845	}
		1846
1419	=item AnyEvent::Handle::TLS_CTX	1847	=item AnyEvent::Handle::TLS_CTX
1420		1848
1421	This function creates and returns the Net::SSLeay::CTX object used by	1849	This function creates and returns the AnyEvent::TLS object used by default
1422	default for TLS mode.	1850	for TLS mode.
1423		1851
1424	The context is created like this:	1852	The context is created by calling L<AnyEvent::TLS> without any arguments.
1425
1426	Net::SSLeay::load_error_strings;
1427	Net::SSLeay::SSLeay_add_ssl_algorithms;
1428	Net::SSLeay::randomize;
1429
1430	my $CTX = Net::SSLeay::CTX_new;
1431
1432	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1433		1853
1434	=cut	1854	=cut
1435		1855
1436	our $TLS_CTX;	1856	our $TLS_CTX;
1437		1857
1438	sub TLS_CTX() {	1858	sub TLS_CTX() {
1439	$TLS_CTX || do {	1859	$TLS_CTX ||= do {
1440	require Net::SSLeay;	1860	require AnyEvent::TLS;
1441		1861
1442	Net::SSLeay::load_error_strings ();	1862	new AnyEvent::TLS
1443	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1444	Net::SSLeay::randomize ();
1445
1446	$TLS_CTX = Net::SSLeay::CTX_new ();
1447
1448	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1449
1450	$TLS_CTX
1451	}	1863	}
1452	}	1864	}
1453		1865
1454	=back	1866	=back
		1867
		1868
		1869	=head1 NONFREQUENTLY ASKED QUESTIONS
		1870
		1871	=over 4
		1872
		1873	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		1874	still get further invocations!
		1875
		1876	That's because AnyEvent::Handle keeps a reference to itself when handling
		1877	read or write callbacks.
		1878
		1879	It is only safe to "forget" the reference inside EOF or error callbacks,
		1880	from within all other callbacks, you need to explicitly call the C<<
		1881	->destroy >> method.
		1882
		1883	=item I get different callback invocations in TLS mode/Why can't I pause
		1884	reading?
		1885
		1886	Unlike, say, TCP, TLS connections do not consist of two independent
		1887	communication channels, one for each direction. Or put differently. The
		1888	read and write directions are not independent of each other: you cannot
		1889	write data unless you are also prepared to read, and vice versa.
		1890
		1891	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		1892	callback invocations when you are not expecting any read data - the reason
		1893	is that AnyEvent::Handle always reads in TLS mode.
		1894
		1895	During the connection, you have to make sure that you always have a
		1896	non-empty read-queue, or an C<on_read> watcher. At the end of the
		1897	connection (or when you no longer want to use it) you can call the
		1898	C<destroy> method.
		1899
		1900	=item How do I read data until the other side closes the connection?
		1901
		1902	If you just want to read your data into a perl scalar, the easiest way
		1903	to achieve this is by setting an C<on_read> callback that does nothing,
		1904	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		1905	will be in C<$_[0]{rbuf}>:
		1906
		1907	$handle->on_read (sub { });
		1908	$handle->on_eof (undef);
		1909	$handle->on_error (sub {
		1910	my $data = delete $_[0]{rbuf};
		1911	});
		1912
		1913	The reason to use C<on_error> is that TCP connections, due to latencies
		1914	and packets loss, might get closed quite violently with an error, when in
		1915	fact, all data has been received.
		1916
		1917	It is usually better to use acknowledgements when transferring data,
		1918	to make sure the other side hasn't just died and you got the data
		1919	intact. This is also one reason why so many internet protocols have an
		1920	explicit QUIT command.
		1921
		1922	=item I don't want to destroy the handle too early - how do I wait until
		1923	all data has been written?
		1924
		1925	After writing your last bits of data, set the C<on_drain> callback
		1926	and destroy the handle in there - with the default setting of
		1927	C<low_water_mark> this will be called precisely when all data has been
		1928	written to the socket:
		1929
		1930	$handle->push_write (...);
		1931	$handle->on_drain (sub {
		1932	warn "all data submitted to the kernel\n";
		1933	undef $handle;
		1934	});
		1935
		1936	If you just want to queue some data and then signal EOF to the other side,
		1937	consider using C<< ->push_shutdown >> instead.
		1938
		1939	=item I want to contact a TLS/SSL server, I don't care about security.
		1940
		1941	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		1942	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		1943	parameter:
		1944
		1945	tcp_connect $host, $port, sub {
		1946	my ($fh) = @_;
		1947
		1948	my $handle = new AnyEvent::Handle
		1949	fh => $fh,
		1950	tls => "connect",
		1951	on_error => sub { ... };
		1952
		1953	$handle->push_write (...);
		1954	};
		1955
		1956	=item I want to contact a TLS/SSL server, I do care about security.
		1957
		1958	Then you should additionally enable certificate verification, including
		1959	peername verification, if the protocol you use supports it (see
		1960	L<AnyEvent::TLS>, C<verify_peername>).
		1961
		1962	E.g. for HTTPS:
		1963
		1964	tcp_connect $host, $port, sub {
		1965	my ($fh) = @_;
		1966
		1967	my $handle = new AnyEvent::Handle
		1968	fh => $fh,
		1969	peername => $host,
		1970	tls => "connect",
		1971	tls_ctx => { verify => 1, verify_peername => "https" },
		1972	...
		1973
		1974	Note that you must specify the hostname you connected to (or whatever
		1975	"peername" the protocol needs) as the C<peername> argument, otherwise no
		1976	peername verification will be done.
		1977
		1978	The above will use the system-dependent default set of trusted CA
		1979	certificates. If you want to check against a specific CA, add the
		1980	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		1981
		1982	tls_ctx => {
		1983	verify => 1,
		1984	verify_peername => "https",
		1985	ca_file => "my-ca-cert.pem",
		1986	},
		1987
		1988	=item I want to create a TLS/SSL server, how do I do that?
		1989
		1990	Well, you first need to get a server certificate and key. You have
		1991	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		1992	self-signed certificate (cheap. check the search engine of your choice,
		1993	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		1994	nice program for that purpose).
		1995
		1996	Then create a file with your private key (in PEM format, see
		1997	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		1998	file should then look like this:
		1999
		2000	-----BEGIN RSA PRIVATE KEY-----
		2001	...header data
		2002	... lots of base64'y-stuff
		2003	-----END RSA PRIVATE KEY-----
		2004
		2005	-----BEGIN CERTIFICATE-----
		2006	... lots of base64'y-stuff
		2007	-----END CERTIFICATE-----
		2008
		2009	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2010	specify this file as C<cert_file>:
		2011
		2012	tcp_server undef, $port, sub {
		2013	my ($fh) = @_;
		2014
		2015	my $handle = new AnyEvent::Handle
		2016	fh => $fh,
		2017	tls => "accept",
		2018	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2019	...
		2020
		2021	When you have intermediate CA certificates that your clients might not
		2022	know about, just append them to the C<cert_file>.
		2023
		2024	=back
		2025
1455		2026
1456	=head1 SUBCLASSING AnyEvent::Handle	2027	=head1 SUBCLASSING AnyEvent::Handle
1457		2028
1458	In many cases, you might want to subclass AnyEvent::Handle.	2029	In many cases, you might want to subclass AnyEvent::Handle.
1459		2030

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines