[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.40 by root, Tue May 27 05:36:27 2008 UTC vs.
Revision 1.84 by root, Thu Aug 21 19:13:05 2008 UTC

…		…
1	package AnyEvent::Handle;	1	package AnyEvent::Handle;
2		2
3	no warnings;	3	no warnings;
4	use strict;	4	use strict qw(subs vars);
5		5
6	use AnyEvent ();	6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAWOULDBLOCK);	7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();	8	use Scalar::Util ();
9	use Carp ();	9	use Carp ();
10	use Fcntl ();	10	use Fcntl ();
11	use Errno qw/EAGAIN EINTR/;	11	use Errno qw(EAGAIN EINTR);
12		12
13	=head1 NAME	13	=head1 NAME
14		14
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16		16
17	=cut	17	=cut
18		18
19	our $VERSION = '0.04';	19	our $VERSION = 4.232;
20		20
21	=head1 SYNOPSIS	21	=head1 SYNOPSIS
22		22
23	use AnyEvent;	23	use AnyEvent;
24	use AnyEvent::Handle;	24	use AnyEvent::Handle;
49		49
50	This module is a helper module to make it easier to do event-based I/O on	50	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	51	filehandles. For utility functions for doing non-blocking connects and accepts
52	on sockets see L<AnyEvent::Util>.	52	on sockets see L<AnyEvent::Util>.
53		53
		54	The L<AnyEvent::Intro> tutorial contains some well-documented
		55	AnyEvent::Handle examples.
		56
54	In the following, when the documentation refers to of "bytes" then this	57	In the following, when the documentation refers to of "bytes" then this
55	means characters. As sysread and syswrite are used for all I/O, their	58	means characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	59	treatment of characters applies to this module as well.
57		60
58	All callbacks will be invoked with the handle object as their first	61	All callbacks will be invoked with the handle object as their first
…		…
70		73
71	=item fh => $filehandle [MANDATORY]	74	=item fh => $filehandle [MANDATORY]
72		75
73	The filehandle this L<AnyEvent::Handle> object will operate on.	76	The filehandle this L<AnyEvent::Handle> object will operate on.
74		77
75	NOTE: The filehandle will be set to non-blocking (using	78	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		80	that mode.
77		81
78	=item on_eof => $cb->($handle)	82	=item on_eof => $cb->($handle)
79		83
80	Set the callback to be called on EOF.	84	Set the callback to be called when an end-of-file condition is detected,
		85	i.e. in the case of a socket, when the other side has closed the
		86	connection cleanly.
81		87
		88	For sockets, this just means that the other side has stopped sending data,
		89	you can still try to write data, and, in fact, one can return from the eof
		90	callback and continue writing data, as only the read part has been shut
		91	down.
		92
82	While not mandatory, it is highly recommended to set an eof callback,	93	While not mandatory, it is I<highly> recommended to set an eof callback,
83	otherwise you might end up with a closed socket while you are still	94	otherwise you might end up with a closed socket while you are still
84	waiting for data.	95	waiting for data.
85		96
		97	If an EOF condition has been detected but no C<on_eof> callback has been
		98	set, then a fatal error will be raised with C<$!> set to <0>.
		99
86	=item on_error => $cb->($handle)	100	=item on_error => $cb->($handle, $fatal)
87		101
88	This is the fatal error callback, that is called when, well, a fatal error	102	This is the error callback, which is called when, well, some error
89	occurs, such as not being able to resolve the hostname, failure to connect	103	occured, such as not being able to resolve the hostname, failure to
90	or a read error.	104	connect or a read error.
91		105
92	The object will not be in a usable state when this callback has been	106	Some errors are fatal (which is indicated by C<$fatal> being true). On
93	called.	107	fatal errors the handle object will be shut down and will not be usable
		108	(but you are free to look at the current C< ->rbuf >). Examples of fatal
		109	errors are an EOF condition with active (but unsatisifable) read watchers
		110	(C<EPIPE>) or I/O errors.
		111
		112	Non-fatal errors can be retried by simply returning, but it is recommended
		113	to simply ignore this parameter and instead abondon the handle object
		114	when this callback is invoked. Examples of non-fatal errors are timeouts
		115	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
94		116
95	On callback entrance, the value of C<$!> contains the operating system	117	On callback entrance, the value of C<$!> contains the operating system
96	error (or C<ENOSPC>, C<EPIPE> or C<EBADMSG>).	118	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).
97
98	The callback should throw an exception. If it returns, then
99	AnyEvent::Handle will C<croak> for you.
100		119
101	While not mandatory, it is I<highly> recommended to set this callback, as	120	While not mandatory, it is I<highly> recommended to set this callback, as
102	you will not be notified of errors otherwise. The default simply calls	121	you will not be notified of errors otherwise. The default simply calls
103	die.	122	C<croak>.
104		123
105	=item on_read => $cb->($handle)	124	=item on_read => $cb->($handle)
106		125
107	This sets the default read callback, which is called when data arrives	126	This sets the default read callback, which is called when data arrives
108	and no read request is in the queue.	127	and no read request is in the queue (unlike read queue callbacks, this
		128	callback will only be called when at least one octet of data is in the
		129	read buffer).
109		130
110	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	131	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
111	method or access the C<$handle->{rbuf}> member directly.	132	method or access the C<$handle->{rbuf}> member directly.
112		133
113	When an EOF condition is detected then AnyEvent::Handle will first try to	134	When an EOF condition is detected then AnyEvent::Handle will first try to
…		…
119		140
120	This sets the callback that is called when the write buffer becomes empty	141	This sets the callback that is called when the write buffer becomes empty
121	(or when the callback is set and the buffer is empty already).	142	(or when the callback is set and the buffer is empty already).
122		143
123	To append to the write buffer, use the C<< ->push_write >> method.	144	To append to the write buffer, use the C<< ->push_write >> method.
		145
		146	This callback is useful when you don't want to put all of your write data
		147	into the queue at once, for example, when you want to write the contents
		148	of some file to the socket you might not want to read the whole file into
		149	memory and push it into the queue, but instead only read more data from
		150	the file when the write queue becomes empty.
		151
		152	=item timeout => $fractional_seconds
		153
		154	If non-zero, then this enables an "inactivity" timeout: whenever this many
		155	seconds pass without a successful read or write on the underlying file
		156	handle, the C<on_timeout> callback will be invoked (and if that one is
		157	missing, an C<ETIMEDOUT> error will be raised).
		158
		159	Note that timeout processing is also active when you currently do not have
		160	any outstanding read or write requests: If you plan to keep the connection
		161	idle then you should disable the timout temporarily or ignore the timeout
		162	in the C<on_timeout> callback.
		163
		164	Zero (the default) disables this timeout.
		165
		166	=item on_timeout => $cb->($handle)
		167
		168	Called whenever the inactivity timeout passes. If you return from this
		169	callback, then the timeout will be reset as if some activity had happened,
		170	so this condition is not fatal in any way.
124		171
125	=item rbuf_max => <bytes>	172	=item rbuf_max => <bytes>
126		173
127	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	174	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
128	when the read buffer ever (strictly) exceeds this size. This is useful to	175	when the read buffer ever (strictly) exceeds this size. This is useful to
…		…
132	be configured to accept only so-and-so much data that it cannot act on	179	be configured to accept only so-and-so much data that it cannot act on
133	(for example, when expecting a line, an attacker could send an unlimited	180	(for example, when expecting a line, an attacker could send an unlimited
134	amount of data without a callback ever being called as long as the line	181	amount of data without a callback ever being called as long as the line
135	isn't finished).	182	isn't finished).
136		183
		184	=item autocork => <boolean>
		185
		186	When disabled (the default), then C<push_write> will try to immediately
		187	write the data to the handle if possible. This avoids having to register
		188	a write watcher and wait for the next event loop iteration, but can be
		189	inefficient if you write multiple small chunks (this disadvantage is
		190	usually avoided by your kernel's nagle algorithm, see C<low_delay>).
		191
		192	When enabled, then writes will always be queued till the next event loop
		193	iteration. This is efficient when you do many small writes per iteration,
		194	but less efficient when you do a single write only.
		195
		196	=item no_delay => <boolean>
		197
		198	When doing small writes on sockets, your operating system kernel might
		199	wait a bit for more data before actually sending it out. This is called
		200	the Nagle algorithm, and usually it is beneficial.
		201
		202	In some situations you want as low a delay as possible, which cna be
		203	accomplishd by setting this option to true.
		204
		205	The default is your opertaing system's default behaviour, this option
		206	explicitly enables or disables it, if possible.
		207
137	=item read_size => <bytes>	208	=item read_size => <bytes>
138		209
139	The default read block size (the amount of bytes this module will try to read	210	The default read block size (the amount of bytes this module will try to read
140	on each [loop iteration). Default: C<4096>.	211	during each (loop iteration). Default: C<8192>.
141		212
142	=item low_water_mark => <bytes>	213	=item low_water_mark => <bytes>
143		214
144	Sets the amount of bytes (default: C<0>) that make up an "empty" write	215	Sets the amount of bytes (default: C<0>) that make up an "empty" write
145	buffer: If the write reaches this size or gets even samller it is	216	buffer: If the write reaches this size or gets even samller it is
146	considered empty.	217	considered empty.
		218
		219	=item linger => <seconds>
		220
		221	If non-zero (default: C<3600>), then the destructor of the
		222	AnyEvent::Handle object will check wether there is still outstanding write
		223	data and will install a watcher that will write out this data. No errors
		224	will be reported (this mostly matches how the operating system treats
		225	outstanding data at socket close time).
		226
		227	This will not work for partial TLS data that could not yet been
		228	encoded. This data will be lost.
147		229
148	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object	230	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object
149		231
150	When this parameter is given, it enables TLS (SSL) mode, that means it	232	When this parameter is given, it enables TLS (SSL) mode, that means it
151	will start making tls handshake and will transparently encrypt/decrypt	233	will start making tls handshake and will transparently encrypt/decrypt
…		…
160	You can also provide your own TLS connection object, but you have	242	You can also provide your own TLS connection object, but you have
161	to make sure that you call either C<Net::SSLeay::set_connect_state>	243	to make sure that you call either C<Net::SSLeay::set_connect_state>
162	or C<Net::SSLeay::set_accept_state> on it before you pass it to	244	or C<Net::SSLeay::set_accept_state> on it before you pass it to
163	AnyEvent::Handle.	245	AnyEvent::Handle.
164		246
165	See the C<starttls> method if you need to start TLs negotiation later.	247	See the C<starttls> method if you need to start TLS negotiation later.
166		248
167	=item tls_ctx => $ssl_ctx	249	=item tls_ctx => $ssl_ctx
168		250
169	Use the given Net::SSLeay::CTX object to create the new TLS connection	251	Use the given Net::SSLeay::CTX object to create the new TLS connection
170	(unless a connection object was specified directly). If this parameter is	252	(unless a connection object was specified directly). If this parameter is
…		…
172		254
173	=item json => JSON or JSON::XS object	255	=item json => JSON or JSON::XS object
174		256
175	This is the json coder object used by the C<json> read and write types.	257	This is the json coder object used by the C<json> read and write types.
176		258
177	If you don't supply it, then AnyEvent::Handle will use C<encode_json> and	259	If you don't supply it, then AnyEvent::Handle will create and use a
178	C<decode_json>.	260	suitable one, which will write and expect UTF-8 encoded JSON texts.
179		261
180	Note that you are responsible to depend on the JSON module if you want to	262	Note that you are responsible to depend on the JSON module if you want to
181	use this functionality, as AnyEvent does not have a dependency itself.	263	use this functionality, as AnyEvent does not have a dependency itself.
182		264
183	=item filter_r => $cb	265	=item filter_r => $cb
…		…
202	if ($self->{tls}) {	284	if ($self->{tls}) {
203	require Net::SSLeay;	285	require Net::SSLeay;
204	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	286	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});
205	}	287	}
206		288
207	$self->on_eof (delete $self->{on_eof} ) if $self->{on_eof};	289	$self->{_activity} = AnyEvent->now;
208	$self->on_error (delete $self->{on_error}) if $self->{on_error};	290	$self->_timeout;
		291
209	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	292	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};
210	$self->on_read (delete $self->{on_read} ) if $self->{on_read};	293	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
211		294
212	$self->start_read;	295	$self->start_read
		296	if $self->{on_read};
213		297
214	$self	298	$self
215	}	299	}
216		300
217	sub _shutdown {	301	sub _shutdown {
218	my ($self) = @_;	302	my ($self) = @_;
219		303
		304	delete $self->{_tw};
220	delete $self->{_rw};	305	delete $self->{_rw};
221	delete $self->{_ww};	306	delete $self->{_ww};
222	delete $self->{fh};	307	delete $self->{fh};
223	}
224		308
		309	$self->stoptls;
		310
		311	delete $self->{on_read};
		312	delete $self->{_queue};
		313	}
		314
225	sub error {	315	sub _error {
226	my ($self) = @_;	316	my ($self, $errno, $fatal) = @_;
227		317
228	{
229	local $!;
230	$self->_shutdown;	318	$self->_shutdown
231	}	319	if $fatal;
232		320
233	$self->{on_error}($self)	321	$! = $errno;
		322
234	if $self->{on_error};	323	if ($self->{on_error}) {
235		324	$self->{on_error}($self, $fatal);
		325	} else {
236	Carp::croak "AnyEvent::Handle uncaught fatal error: $!";	326	Carp::croak "AnyEvent::Handle uncaught error: $!";
		327	}
237	}	328	}
238		329
239	=item $fh = $handle->fh	330	=item $fh = $handle->fh
240		331
241	This method returns the file handle of the L<AnyEvent::Handle> object.	332	This method returns the file handle of the L<AnyEvent::Handle> object.
…		…
260		351
261	=cut	352	=cut
262		353
263	sub on_eof {	354	sub on_eof {
264	$_[0]{on_eof} = $_[1];	355	$_[0]{on_eof} = $_[1];
		356	}
		357
		358	=item $handle->on_timeout ($cb)
		359
		360	Replace the current C<on_timeout> callback, or disables the callback
		361	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor
		362	argument.
		363
		364	=cut
		365
		366	sub on_timeout {
		367	$_[0]{on_timeout} = $_[1];
		368	}
		369
		370	=item $handle->autocork ($boolean)
		371
		372	Enables or disables the current autocork behaviour (see C<autocork>
		373	constructor argument).
		374
		375	=cut
		376
		377	=item $handle->no_delay ($boolean)
		378
		379	Enables or disables the C<no_delay> setting (see constructor argument of
		380	the same name for details).
		381
		382	=cut
		383
		384	sub no_delay {
		385	$_[0]{no_delay} = $_[1];
		386
		387	eval {
		388	local $SIG{__DIE__};
		389	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];
		390	};
		391	}
		392
		393	#############################################################################
		394
		395	=item $handle->timeout ($seconds)
		396
		397	Configures (or disables) the inactivity timeout.
		398
		399	=cut
		400
		401	sub timeout {
		402	my ($self, $timeout) = @_;
		403
		404	$self->{timeout} = $timeout;
		405	$self->_timeout;
		406	}
		407
		408	# reset the timeout watcher, as neccessary
		409	# also check for time-outs
		410	sub _timeout {
		411	my ($self) = @_;
		412
		413	if ($self->{timeout}) {
		414	my $NOW = AnyEvent->now;
		415
		416	# when would the timeout trigger?
		417	my $after = $self->{_activity} + $self->{timeout} - $NOW;
		418
		419	# now or in the past already?
		420	if ($after <= 0) {
		421	$self->{_activity} = $NOW;
		422
		423	if ($self->{on_timeout}) {
		424	$self->{on_timeout}($self);
		425	} else {
		426	$self->_error (&Errno::ETIMEDOUT);
		427	}
		428
		429	# callback could have changed timeout value, optimise
		430	return unless $self->{timeout};
		431
		432	# calculate new after
		433	$after = $self->{timeout};
		434	}
		435
		436	Scalar::Util::weaken $self;
		437	return unless $self; # ->error could have destroyed $self
		438
		439	$self->{_tw} \|\|= AnyEvent->timer (after => $after, cb => sub {
		440	delete $self->{_tw};
		441	$self->_timeout;
		442	});
		443	} else {
		444	delete $self->{_tw};
		445	}
265	}	446	}
266		447
267	#############################################################################	448	#############################################################################
268		449
269	=back	450	=back
…		…
316	my $len = syswrite $self->{fh}, $self->{wbuf};	497	my $len = syswrite $self->{fh}, $self->{wbuf};
317		498
318	if ($len >= 0) {	499	if ($len >= 0) {
319	substr $self->{wbuf}, 0, $len, "";	500	substr $self->{wbuf}, 0, $len, "";
320		501
		502	$self->{_activity} = AnyEvent->now;
		503
321	$self->{on_drain}($self)	504	$self->{on_drain}($self)
322	if $self->{low_water_mark} >= length $self->{wbuf}	505	if $self->{low_water_mark} >= length $self->{wbuf}
323	&& $self->{on_drain};	506	&& $self->{on_drain};
324		507
325	delete $self->{_ww} unless length $self->{wbuf};	508	delete $self->{_ww} unless length $self->{wbuf};
326	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAWOULDBLOCK) {	509	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
327	$self->error;	510	$self->_error ($!, 1);
328	}	511	}
329	};	512	};
330		513
331	# try to write data immediately	514	# try to write data immediately
332	$cb->();	515	$cb->() unless $self->{autocork};
333		516
334	# if still data left in wbuf, we need to poll	517	# if still data left in wbuf, we need to poll
335	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	518	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)
336	if length $self->{wbuf};	519	if length $self->{wbuf};
337	};	520	};
…		…
352	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	535	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
353	->($self, @_);	536	->($self, @_);
354	}	537	}
355		538
356	if ($self->{filter_w}) {	539	if ($self->{filter_w}) {
357	$self->{filter_w}->($self, \$_[0]);	540	$self->{filter_w}($self, \$_[0]);
358	} else {	541	} else {
359	$self->{wbuf} .= $_[0];	542	$self->{wbuf} .= $_[0];
360	$self->_drain_wbuf;	543	$self->_drain_wbuf;
361	}	544	}
362	}	545	}
363		546
364	=item $handle->push_write (type => @args)	547	=item $handle->push_write (type => @args)
365		548
366	=item $handle->unshift_write (type => @args)
367
368	Instead of formatting your data yourself, you can also let this module do	549	Instead of formatting your data yourself, you can also let this module do
369	the job by specifying a type and type-specific arguments.	550	the job by specifying a type and type-specific arguments.
370		551
371	Predefined types are (if you have ideas for additional types, feel free to	552	Predefined types are (if you have ideas for additional types, feel free to
372	drop by and tell us):	553	drop by and tell us):
…		…
376	=item netstring => $string	557	=item netstring => $string
377		558
378	Formats the given value as netstring	559	Formats the given value as netstring
379	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).	560	(http://cr.yp.to/proto/netstrings.txt, this is not a recommendation to use them).
380		561
381	=back
382
383	=cut	562	=cut
384		563
385	register_write_type netstring => sub {	564	register_write_type netstring => sub {
386	my ($self, $string) = @_;	565	my ($self, $string) = @_;
387		566
388	sprintf "%d:%s,", (length $string), $string	567	sprintf "%d:%s,", (length $string), $string
		568	};
		569
		570	=item packstring => $format, $data
		571
		572	An octet string prefixed with an encoded length. The encoding C<$format>
		573	uses the same format as a Perl C<pack> format, but must specify a single
		574	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		575	optional C<!>, C<< < >> or C<< > >> modifier).
		576
		577	=cut
		578
		579	register_write_type packstring => sub {
		580	my ($self, $format, $string) = @_;
		581
		582	pack "$format/a*", $string
389	};	583	};
390		584
391	=item json => $array_or_hashref	585	=item json => $array_or_hashref
392		586
393	Encodes the given hash or array reference into a JSON object. Unless you	587	Encodes the given hash or array reference into a JSON object. Unless you
…		…
396		590
397	JSON objects (and arrays) are self-delimiting, so you can write JSON at	591	JSON objects (and arrays) are self-delimiting, so you can write JSON at
398	one end of a handle and read them at the other end without using any	592	one end of a handle and read them at the other end without using any
399	additional framing.	593	additional framing.
400		594
		595	The generated JSON text is guaranteed not to contain any newlines: While
		596	this module doesn't need delimiters after or between JSON texts to be
		597	able to read them, many other languages depend on that.
		598
		599	A simple RPC protocol that interoperates easily with others is to send
		600	JSON arrays (or objects, although arrays are usually the better choice as
		601	they mimic how function argument passing works) and a newline after each
		602	JSON text:
		603
		604	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever
		605	$handle->push_write ("\012");
		606
		607	An AnyEvent::Handle receiver would simply use the C<json> read type and
		608	rely on the fact that the newline will be skipped as leading whitespace:
		609
		610	$handle->push_read (json => sub { my $array = $_[1]; ... });
		611
		612	Other languages could read single lines terminated by a newline and pass
		613	this line into their JSON decoder of choice.
		614
401	=cut	615	=cut
402		616
403	register_write_type json => sub {	617	register_write_type json => sub {
404	my ($self, $ref) = @_;	618	my ($self, $ref) = @_;
405		619
…		…
407		621
408	$self->{json} ? $self->{json}->encode ($ref)	622	$self->{json} ? $self->{json}->encode ($ref)
409	: JSON::encode_json ($ref)	623	: JSON::encode_json ($ref)
410	};	624	};
411		625
		626	=item storable => $reference
		627
		628	Freezes the given reference using L<Storable> and writes it to the
		629	handle. Uses the C<nfreeze> format.
		630
		631	=cut
		632
		633	register_write_type storable => sub {
		634	my ($self, $ref) = @_;
		635
		636	require Storable;
		637
		638	pack "w/a*", Storable::nfreeze ($ref)
		639	};
		640
		641	=back
		642
412	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	643	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
413		644
414	This function (not method) lets you add your own types to C<push_write>.	645	This function (not method) lets you add your own types to C<push_write>.
415	Whenever the given C<type> is used, C<push_write> will invoke the code	646	Whenever the given C<type> is used, C<push_write> will invoke the code
416	reference with the handle object and the remaining arguments.	647	reference with the handle object and the remaining arguments.
…		…
436	ways, the "simple" way, using only C<on_read> and the "complex" way, using	667	ways, the "simple" way, using only C<on_read> and the "complex" way, using
437	a queue.	668	a queue.
438		669
439	In the simple case, you just install an C<on_read> callback and whenever	670	In the simple case, you just install an C<on_read> callback and whenever
440	new data arrives, it will be called. You can then remove some data (if	671	new data arrives, it will be called. You can then remove some data (if
441	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	672	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna
442	or not.	673	leave the data there if you want to accumulate more (e.g. when only a
		674	partial message has been received so far).
443		675
444	In the more complex case, you want to queue multiple callbacks. In this	676	In the more complex case, you want to queue multiple callbacks. In this
445	case, AnyEvent::Handle will call the first queued callback each time new	677	case, AnyEvent::Handle will call the first queued callback each time new
446	data arrives and removes it when it has done its job (see C<push_read>,	678	data arrives (also the first time it is queued) and removes it when it has
447	below).	679	done its job (see C<push_read>, below).
448		680
449	This way you can, for example, push three line-reads, followed by reading	681	This way you can, for example, push three line-reads, followed by reading
450	a chunk of data, and AnyEvent::Handle will execute them in order.	682	a chunk of data, and AnyEvent::Handle will execute them in order.
451		683
452	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by	684	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by
453	the specified number of bytes which give an XML datagram.	685	the specified number of bytes which give an XML datagram.
454		686
455	# in the default state, expect some header bytes	687	# in the default state, expect some header bytes
456	$handle->on_read (sub {	688	$handle->on_read (sub {
457	# some data is here, now queue the length-header-read (4 octets)	689	# some data is here, now queue the length-header-read (4 octets)
458	shift->unshift_read_chunk (4, sub {	690	shift->unshift_read (chunk => 4, sub {
459	# header arrived, decode	691	# header arrived, decode
460	my $len = unpack "N", $_[1];	692	my $len = unpack "N", $_[1];
461		693
462	# now read the payload	694	# now read the payload
463	shift->unshift_read_chunk ($len, sub {	695	shift->unshift_read (chunk => $len, sub {
464	my $xml = $_[1];	696	my $xml = $_[1];
465	# handle xml	697	# handle xml
466	});	698	});
467	});	699	});
468	});	700	});
469		701
470	Example 2: Implement a client for a protocol that replies either with	702	Example 2: Implement a client for a protocol that replies either with "OK"
471	"OK" and another line or "ERROR" for one request, and 64 bytes for the	703	and another line or "ERROR" for the first request that is sent, and 64
472	second request. Due tot he availability of a full queue, we can just	704	bytes for the second request. Due to the availability of a queue, we can
473	pipeline sending both requests and manipulate the queue as necessary in	705	just pipeline sending both requests and manipulate the queue as necessary
474	the callbacks:	706	in the callbacks.
475		707
476	# request one	708	When the first callback is called and sees an "OK" response, it will
		709	C<unshift> another line-read. This line-read will be queued I<before> the
		710	64-byte chunk callback.
		711
		712	# request one, returns either "OK + extra line" or "ERROR"
477	$handle->push_write ("request 1\015\012");	713	$handle->push_write ("request 1\015\012");
478		714
479	# we expect "ERROR" or "OK" as response, so push a line read	715	# we expect "ERROR" or "OK" as response, so push a line read
480	$handle->push_read_line (sub {	716	$handle->push_read (line => sub {
481	# if we got an "OK", we have to _prepend_ another line,	717	# if we got an "OK", we have to _prepend_ another line,
482	# so it will be read before the second request reads its 64 bytes	718	# so it will be read before the second request reads its 64 bytes
483	# which are already in the queue when this callback is called	719	# which are already in the queue when this callback is called
484	# we don't do this in case we got an error	720	# we don't do this in case we got an error
485	if ($_[1] eq "OK") {	721	if ($_[1] eq "OK") {
486	$_[0]->unshift_read_line (sub {	722	$_[0]->unshift_read (line => sub {
487	my $response = $_[1];	723	my $response = $_[1];
488	...	724	...
489	});	725	});
490	}	726	}
491	});	727	});
492		728
493	# request two	729	# request two, simply returns 64 octets
494	$handle->push_write ("request 2\015\012");	730	$handle->push_write ("request 2\015\012");
495		731
496	# simply read 64 bytes, always	732	# simply read 64 bytes, always
497	$handle->push_read_chunk (64, sub {	733	$handle->push_read (chunk => 64, sub {
498	my $response = $_[1];	734	my $response = $_[1];
499	...	735	...
500	});	736	});
501		737
502	=over 4	738	=over 4
503		739
504	=cut	740	=cut
505		741
506	sub _drain_rbuf {	742	sub _drain_rbuf {
507	my ($self) = @_;	743	my ($self) = @_;
		744
		745	local $self->{_in_drain} = 1;
508		746
509	if (	747	if (
510	defined $self->{rbuf_max}	748	defined $self->{rbuf_max}
511	&& $self->{rbuf_max} < length $self->{rbuf}	749	&& $self->{rbuf_max} < length $self->{rbuf}
512	) {	750	) {
513	$! = &Errno::ENOSPC;	751	$self->_error (&Errno::ENOSPC, 1), return;
514	$self->error;
515	}	752	}
516		753
517	return if $self->{in_drain};	754	while () {
518	local $self->{in_drain} = 1;
519
520	while (my $len = length $self->{rbuf}) {	755	my $len = length $self->{rbuf};
521	no strict 'refs';	756
522	if (my $cb = shift @{ $self->{_queue} }) {	757	if (my $cb = shift @{ $self->{_queue} }) {
523	unless ($cb->($self)) {	758	unless ($cb->($self)) {
524	if ($self->{_eof}) {	759	if ($self->{_eof}) {
525	# no progress can be made (not enough data and no data forthcoming)	760	# no progress can be made (not enough data and no data forthcoming)
526	$! = &Errno::EPIPE;	761	$self->_error (&Errno::EPIPE, 1), return;
527	$self->error;
528	}	762	}
529		763
530	unshift @{ $self->{_queue} }, $cb;	764	unshift @{ $self->{_queue} }, $cb;
531	return;	765	last;
532	}	766	}
533	} elsif ($self->{on_read}) {	767	} elsif ($self->{on_read}) {
		768	last unless $len;
		769
534	$self->{on_read}($self);	770	$self->{on_read}($self);
535		771
536	if (	772	if (
537	$self->{_eof} # if no further data will arrive
538	&& $len == length $self->{rbuf} # and no data has been consumed	773	$len == length $self->{rbuf} # if no data has been consumed
539	&& !@{ $self->{_queue} } # and the queue is still empty	774	&& !@{ $self->{_queue} } # and the queue is still empty
540	&& $self->{on_read} # and we still want to read data	775	&& $self->{on_read} # but we still have on_read
541	) {	776	) {
		777	# no further data will arrive
542	# then no progress can be made	778	# so no progress can be made
543	$! = &Errno::EPIPE;	779	$self->_error (&Errno::EPIPE, 1), return
544	$self->error;	780	if $self->{_eof};
		781
		782	last; # more data might arrive
545	}	783	}
546	} else {	784	} else {
547	# read side becomes idle	785	# read side becomes idle
548	delete $self->{_rw};	786	delete $self->{_rw};
549	return;	787	last;
550	}	788	}
551	}	789	}
552		790
553	if ($self->{_eof}) {	791	if ($self->{_eof}) {
554	$self->_shutdown;	792	if ($self->{on_eof}) {
555	$self->{on_eof}($self)	793	$self->{on_eof}($self)
556	if $self->{on_eof};	794	} else {
		795	$self->_error (0, 1);
		796	}
		797	}
		798
		799	# may need to restart read watcher
		800	unless ($self->{_rw}) {
		801	$self->start_read
		802	if $self->{on_read} \|\| @{ $self->{_queue} };
557	}	803	}
558	}	804	}
559		805
560	=item $handle->on_read ($cb)	806	=item $handle->on_read ($cb)
561		807
…		…
567		813
568	sub on_read {	814	sub on_read {
569	my ($self, $cb) = @_;	815	my ($self, $cb) = @_;
570		816
571	$self->{on_read} = $cb;	817	$self->{on_read} = $cb;
		818	$self->_drain_rbuf if $cb && !$self->{_in_drain};
572	}	819	}
573		820
574	=item $handle->rbuf	821	=item $handle->rbuf
575		822
576	Returns the read buffer (as a modifiable lvalue).	823	Returns the read buffer (as a modifiable lvalue).
…		…
625	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	872	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")
626	->($self, $cb, @_);	873	->($self, $cb, @_);
627	}	874	}
628		875
629	push @{ $self->{_queue} }, $cb;	876	push @{ $self->{_queue} }, $cb;
630	$self->_drain_rbuf;	877	$self->_drain_rbuf unless $self->{_in_drain};
631	}	878	}
632		879
633	sub unshift_read {	880	sub unshift_read {
634	my $self = shift;	881	my $self = shift;
635	my $cb = pop;	882	my $cb = pop;
…		…
641	->($self, $cb, @_);	888	->($self, $cb, @_);
642	}	889	}
643		890
644		891
645	unshift @{ $self->{_queue} }, $cb;	892	unshift @{ $self->{_queue} }, $cb;
646	$self->_drain_rbuf;	893	$self->_drain_rbuf unless $self->{_in_drain};
647	}	894	}
648		895
649	=item $handle->push_read (type => @args, $cb)	896	=item $handle->push_read (type => @args, $cb)
650		897
651	=item $handle->unshift_read (type => @args, $cb)	898	=item $handle->unshift_read (type => @args, $cb)
…		…
681	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	928	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
682	1	929	1
683	}	930	}
684	};	931	};
685		932
686	# compatibility with older API
687	sub push_read_chunk {
688	$_[0]->push_read (chunk => $_[1], $_[2]);
689	}
690
691	sub unshift_read_chunk {
692	$_[0]->unshift_read (chunk => $_[1], $_[2]);
693	}
694
695	=item line => [$eol, ]$cb->($handle, $line, $eol)	933	=item line => [$eol, ]$cb->($handle, $line, $eol)
696		934
697	The callback will be called only once a full line (including the end of	935	The callback will be called only once a full line (including the end of
698	line marker, C<$eol>) has been read. This line (excluding the end of line	936	line marker, C<$eol>) has been read. This line (excluding the end of line
699	marker) will be passed to the callback as second argument (C<$line>), and	937	marker) will be passed to the callback as second argument (C<$line>), and
…		…
714	=cut	952	=cut
715		953
716	register_read_type line => sub {	954	register_read_type line => sub {
717	my ($self, $cb, $eol) = @_;	955	my ($self, $cb, $eol) = @_;
718		956
719	$eol = qr\|(\015?\012)\| if @_ < 3;	957	if (@_ < 3) {
720	$eol = quotemeta $eol unless ref $eol;	958	# this is more than twice as fast as the generic code below
721	$eol = qr\|^(.*?)($eol)\|s;
722
723	sub {	959	sub {
724	$_[0]{rbuf} =~ s/$eol// or return;	960	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
725		961
726	$cb->($_[0], $1, $2);	962	$cb->($_[0], $1, $2);
727	1
728	}
729	};
730
731	# compatibility with older API
732	sub push_read_line {
733	my $self = shift;
734	$self->push_read (line => @_);
735	}
736
737	sub unshift_read_line {
738	my $self = shift;
739	$self->unshift_read (line => @_);
740	}
741
742	=item netstring => $cb->($handle, $string)
743
744	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
745
746	Throws an error with C<$!> set to EBADMSG on format violations.
747
748	=cut
749
750	register_read_type netstring => sub {
751	my ($self, $cb) = @_;
752
753	sub {
754	unless ($_[0]{rbuf} =~ s/^(0\|[1-9][0-9]*)://) {
755	if ($_[0]{rbuf} =~ /[^0-9]/) {
756	$! = &Errno::EBADMSG;
757	$self->error;
758	}	963	1
759	return;
760	}	964	}
		965	} else {
		966	$eol = quotemeta $eol unless ref $eol;
		967	$eol = qr\|^(.*?)($eol)\|s;
761		968
762	my $len = $1;	969	sub {
		970	$_[0]{rbuf} =~ s/$eol// or return;
763		971
764	$self->unshift_read (chunk => $len, sub {	972	$cb->($_[0], $1, $2);
765	my $string = $_[1];
766	$_[0]->unshift_read (chunk => 1, sub {
767	if ($_[1] eq ",") {
768	$cb->($_[0], $string);
769	} else {
770	$! = &Errno::EBADMSG;
771	$self->error;
772	}
773	});	973	1
774	});	974	}
775
776	1
777	}	975	}
778	};	976	};
779		977
780	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)	978	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
781		979
…		…
833	return 1;	1031	return 1;
834	}	1032	}
835		1033
836	# reject	1034	# reject
837	if ($reject && $$rbuf =~ $reject) {	1035	if ($reject && $$rbuf =~ $reject) {
838	$! = &Errno::EBADMSG;	1036	$self->_error (&Errno::EBADMSG);
839	$self->error;
840	}	1037	}
841		1038
842	# skip	1039	# skip
843	if ($skip && $$rbuf =~ $skip) {	1040	if ($skip && $$rbuf =~ $skip) {
844	$data .= substr $$rbuf, 0, $+[0], "";	1041	$data .= substr $$rbuf, 0, $+[0], "";
…		…
846		1043
847	()	1044	()
848	}	1045	}
849	};	1046	};
850		1047
		1048	=item netstring => $cb->($handle, $string)
		1049
		1050	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
		1051
		1052	Throws an error with C<$!> set to EBADMSG on format violations.
		1053
		1054	=cut
		1055
		1056	register_read_type netstring => sub {
		1057	my ($self, $cb) = @_;
		1058
		1059	sub {
		1060	unless ($_[0]{rbuf} =~ s/^(0\|[1-9][0-9]*)://) {
		1061	if ($_[0]{rbuf} =~ /[^0-9]/) {
		1062	$self->_error (&Errno::EBADMSG);
		1063	}
		1064	return;
		1065	}
		1066
		1067	my $len = $1;
		1068
		1069	$self->unshift_read (chunk => $len, sub {
		1070	my $string = $_[1];
		1071	$_[0]->unshift_read (chunk => 1, sub {
		1072	if ($_[1] eq ",") {
		1073	$cb->($_[0], $string);
		1074	} else {
		1075	$self->_error (&Errno::EBADMSG);
		1076	}
		1077	});
		1078	});
		1079
		1080	1
		1081	}
		1082	};
		1083
		1084	=item packstring => $format, $cb->($handle, $string)
		1085
		1086	An octet string prefixed with an encoded length. The encoding C<$format>
		1087	uses the same format as a Perl C<pack> format, but must specify a single
		1088	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		1089	optional C<!>, C<< < >> or C<< > >> modifier).
		1090
		1091	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.
		1092
		1093	Example: read a block of data prefixed by its length in BER-encoded
		1094	format (very efficient).
		1095
		1096	$handle->push_read (packstring => "w", sub {
		1097	my ($handle, $data) = @_;
		1098	});
		1099
		1100	=cut
		1101
		1102	register_read_type packstring => sub {
		1103	my ($self, $cb, $format) = @_;
		1104
		1105	sub {
		1106	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1107	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
		1108	or return;
		1109
		1110	$format = length pack $format, $len;
		1111
		1112	# bypass unshift if we already have the remaining chunk
		1113	if ($format + $len <= length $_[0]{rbuf}) {
		1114	my $data = substr $_[0]{rbuf}, $format, $len;
		1115	substr $_[0]{rbuf}, 0, $format + $len, "";
		1116	$cb->($_[0], $data);
		1117	} else {
		1118	# remove prefix
		1119	substr $_[0]{rbuf}, 0, $format, "";
		1120
		1121	# read remaining chunk
		1122	$_[0]->unshift_read (chunk => $len, $cb);
		1123	}
		1124
		1125	1
		1126	}
		1127	};
		1128
851	=item json => $cb->($handle, $hash_or_arrayref)	1129	=item json => $cb->($handle, $hash_or_arrayref)
852		1130
853	Reads a JSON object or array, decodes it and passes it to the callback.	1131	Reads a JSON object or array, decodes it and passes it to the callback.
854		1132
855	If a C<json> object was passed to the constructor, then that will be used	1133	If a C<json> object was passed to the constructor, then that will be used
…		…
859	2.09 (and JSON::XS version 2.2) and above. You have to provide a	1137	2.09 (and JSON::XS version 2.2) and above. You have to provide a
860	dependency on your own: this module will load the JSON module, but	1138	dependency on your own: this module will load the JSON module, but
861	AnyEvent does not depend on it itself.	1139	AnyEvent does not depend on it itself.
862		1140
863	Since JSON texts are fully self-delimiting, the C<json> read and write	1141	Since JSON texts are fully self-delimiting, the C<json> read and write
864	types are an ideal simple RPC protocol: just exchange JSON datagrams.	1142	types are an ideal simple RPC protocol: just exchange JSON datagrams. See
		1143	the C<json> write type description, above, for an actual example.
865		1144
866	=cut	1145	=cut
867		1146
868	register_read_type json => sub {	1147	register_read_type json => sub {
869	my ($self, $cb, $accept, $reject, $skip) = @_;	1148	my ($self, $cb) = @_;
870		1149
871	require JSON;	1150	require JSON;
872		1151
873	my $data;	1152	my $data;
874	my $rbuf = \$self->{rbuf};	1153	my $rbuf = \$self->{rbuf};
875		1154
876	my $json = $self->{json} \|\|= JSON::XS->new->utf8;	1155	my $json = $self->{json} \|\|= JSON->new->utf8;
877		1156
878	sub {	1157	sub {
879	my $ref = $json->incr_parse ($self->{rbuf});	1158	my $ref = $json->incr_parse ($self->{rbuf});
880		1159
881	if ($ref) {	1160	if ($ref) {
…		…
889	()	1168	()
890	}	1169	}
891	}	1170	}
892	};	1171	};
893		1172
		1173	=item storable => $cb->($handle, $ref)
		1174
		1175	Deserialises a L<Storable> frozen representation as written by the
		1176	C<storable> write type (BER-encoded length prefix followed by nfreeze'd
		1177	data).
		1178
		1179	Raises C<EBADMSG> error if the data could not be decoded.
		1180
		1181	=cut
		1182
		1183	register_read_type storable => sub {
		1184	my ($self, $cb) = @_;
		1185
		1186	require Storable;
		1187
		1188	sub {
		1189	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1190	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
		1191	or return;
		1192
		1193	my $format = length pack "w", $len;
		1194
		1195	# bypass unshift if we already have the remaining chunk
		1196	if ($format + $len <= length $_[0]{rbuf}) {
		1197	my $data = substr $_[0]{rbuf}, $format, $len;
		1198	substr $_[0]{rbuf}, 0, $format + $len, "";
		1199	$cb->($_[0], Storable::thaw ($data));
		1200	} else {
		1201	# remove prefix
		1202	substr $_[0]{rbuf}, 0, $format, "";
		1203
		1204	# read remaining chunk
		1205	$_[0]->unshift_read (chunk => $len, sub {
		1206	if (my $ref = eval { Storable::thaw ($_[1]) }) {
		1207	$cb->($_[0], $ref);
		1208	} else {
		1209	$self->_error (&Errno::EBADMSG);
		1210	}
		1211	});
		1212	}
		1213
		1214	1
		1215	}
		1216	};
		1217
894	=back	1218	=back
895		1219
896	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1220	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)
897		1221
898	This function (not method) lets you add your own types to C<push_read>.	1222	This function (not method) lets you add your own types to C<push_read>.
…		…
916	=item $handle->stop_read	1240	=item $handle->stop_read
917		1241
918	=item $handle->start_read	1242	=item $handle->start_read
919		1243
920	In rare cases you actually do not want to read anything from the	1244	In rare cases you actually do not want to read anything from the
921	socket. In this case you can call C<stop_read>. Neither C<on_read> no	1245	socket. In this case you can call C<stop_read>. Neither C<on_read> nor
922	any queued callbacks will be executed then. To start reading again, call	1246	any queued callbacks will be executed then. To start reading again, call
923	C<start_read>.	1247	C<start_read>.
		1248
		1249	Note that AnyEvent::Handle will automatically C<start_read> for you when
		1250	you change the C<on_read> callback or push/unshift a read callback, and it
		1251	will automatically C<stop_read> for you when neither C<on_read> is set nor
		1252	there are any read requests in the queue.
924		1253
925	=cut	1254	=cut
926		1255
927	sub stop_read {	1256	sub stop_read {
928	my ($self) = @_;	1257	my ($self) = @_;
…		…
939	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1268	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {
940	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1269	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};
941	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;	1270	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;
942		1271
943	if ($len > 0) {	1272	if ($len > 0) {
		1273	$self->{_activity} = AnyEvent->now;
		1274
944	$self->{filter_r}	1275	$self->{filter_r}
945	? $self->{filter_r}->($self, $rbuf)	1276	? $self->{filter_r}($self, $rbuf)
946	: $self->_drain_rbuf;	1277	: $self->{_in_drain} \|\| $self->_drain_rbuf;
947		1278
948	} elsif (defined $len) {	1279	} elsif (defined $len) {
949	delete $self->{_rw};	1280	delete $self->{_rw};
950	$self->{_eof} = 1;	1281	$self->{_eof} = 1;
951	$self->_drain_rbuf;	1282	$self->_drain_rbuf unless $self->{_in_drain};
952		1283
953	} elsif ($! != EAGAIN && $! != EINTR && $! != &AnyEvent::Util::WSAWOULDBLOCK) {	1284	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
954	return $self->error;	1285	return $self->_error ($!, 1);
955	}	1286	}
956	});	1287	});
957	}	1288	}
958	}	1289	}
959		1290
960	sub _dotls {	1291	sub _dotls {
961	my ($self) = @_;	1292	my ($self) = @_;
		1293
		1294	my $buf;
962		1295
963	if (length $self->{_tls_wbuf}) {	1296	if (length $self->{_tls_wbuf}) {
964	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1297	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
965	substr $self->{_tls_wbuf}, 0, $len, "";	1298	substr $self->{_tls_wbuf}, 0, $len, "";
966	}	1299	}
967	}	1300	}
968		1301
969	if (defined (my $buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1302	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {
970	$self->{wbuf} .= $buf;	1303	$self->{wbuf} .= $buf;
971	$self->_drain_wbuf;	1304	$self->_drain_wbuf;
972	}	1305	}
973		1306
974	while (defined (my $buf = Net::SSLeay::read ($self->{tls}))) {	1307	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {
		1308	if (length $buf) {
975	$self->{rbuf} .= $buf;	1309	$self->{rbuf} .= $buf;
976	$self->_drain_rbuf;	1310	$self->_drain_rbuf unless $self->{_in_drain};
		1311	} else {
		1312	# let's treat SSL-eof as we treat normal EOF
		1313	$self->{_eof} = 1;
		1314	$self->_shutdown;
		1315	return;
		1316	}
977	}	1317	}
978		1318
979	my $err = Net::SSLeay::get_error ($self->{tls}, -1);	1319	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
980		1320
981	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {	1321	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
982	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {	1322	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
983	$self->error;	1323	return $self->_error ($!, 1);
984	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {	1324	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
985	$! = &Errno::EIO;	1325	return $self->_error (&Errno::EIO, 1);
986	$self->error;
987	}	1326	}
988		1327
989	# all others are fine for our purposes	1328	# all others are fine for our purposes
990	}	1329	}
991	}	1330	}
…		…
1006	call and can be used or changed to your liking. Note that the handshake	1345	call and can be used or changed to your liking. Note that the handshake
1007	might have already started when this function returns.	1346	might have already started when this function returns.
1008		1347
1009	=cut	1348	=cut
1010		1349
1011	# TODO: maybe document...
1012	sub starttls {	1350	sub starttls {
1013	my ($self, $ssl, $ctx) = @_;	1351	my ($self, $ssl, $ctx) = @_;
1014		1352
1015	$self->stoptls;	1353	$self->stoptls;
1016		1354
…		…
1069		1407
1070	sub DESTROY {	1408	sub DESTROY {
1071	my $self = shift;	1409	my $self = shift;
1072		1410
1073	$self->stoptls;	1411	$self->stoptls;
		1412
		1413	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
		1414
		1415	if ($linger && length $self->{wbuf}) {
		1416	my $fh = delete $self->{fh};
		1417	my $wbuf = delete $self->{wbuf};
		1418
		1419	my @linger;
		1420
		1421	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {
		1422	my $len = syswrite $fh, $wbuf, length $wbuf;
		1423
		1424	if ($len > 0) {
		1425	substr $wbuf, 0, $len, "";
		1426	} else {
		1427	@linger = (); # end
		1428	}
		1429	});
		1430	push @linger, AnyEvent->timer (after => $linger, cb => sub {
		1431	@linger = ();
		1432	});
		1433	}
1074	}	1434	}
1075		1435
1076	=item AnyEvent::Handle::TLS_CTX	1436	=item AnyEvent::Handle::TLS_CTX
1077		1437
1078	This function creates and returns the Net::SSLeay::CTX object used by	1438	This function creates and returns the Net::SSLeay::CTX object used by
…		…
1120	=over 4	1480	=over 4
1121		1481
1122	=item * all constructor arguments become object members.	1482	=item * all constructor arguments become object members.
1123		1483
1124	At least initially, when you pass a C<tls>-argument to the constructor it	1484	At least initially, when you pass a C<tls>-argument to the constructor it
1125	will end up in C<< $handle->{tls} >>. Those members might be changes or	1485	will end up in C<< $handle->{tls} >>. Those members might be changed or
1126	mutated later on (for example C<tls> will hold the TLS connection object).	1486	mutated later on (for example C<tls> will hold the TLS connection object).
1127		1487
1128	=item * other object member names are prefixed with an C<_>.	1488	=item * other object member names are prefixed with an C<_>.
1129		1489
1130	All object members not explicitly documented (internal use) are prefixed	1490	All object members not explicitly documented (internal use) are prefixed

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents): Revision 1.40 by root, Tue May 27 05:36:27 2008 UTC vs. Revision 1.84 by root, Thu Aug 21 19:13:05 2008 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.40 by root, Tue May 27 05:36:27 2008 UTC vs.
Revision 1.84 by root, Thu Aug 21 19:13:05 2008 UTC