ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.67 by root, Fri Jun 6 15:33:10 2008 UTC vs.
Revision 1.240 by root, Tue Dec 17 16:43:15 2013 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict;
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.15;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	AE::log error => $msg;
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	say "got line <$line>";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	stream-based filehandles (sockets, pipes, and other stream things).
52	on sockets see L<AnyEvent::Util>.
53		37
		38	The L<AnyEvent::Intro> tutorial contains some well-documented
		39	AnyEvent::Handle examples.
		40
54	In the following, when the documentation refers to of "bytes" then this	41	In the following, where the documentation refers to "bytes", it means
55	means characters. As sysread and syswrite are used for all I/O, their	42	characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
57		47
58	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
59	argument.	49	argument.
60		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
		79
		80	sub MAX_READ_SIZE() { 131072 }
		81
61	=head1 METHODS	82	=head1 METHODS
62		83
63	=over 4	84	=over 4
64		85
65	=item B<new (%args)>	86	=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
66		87
67	The constructor supports these arguments (all as key => value pairs).	88	The constructor supports these arguments (all as C<< key => value >> pairs).
68		89
69	=over 4	90	=over 4
70		91
71	=item fh => $filehandle [MANDATORY]	92	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
72		93
73	The filehandle this L<AnyEvent::Handle> object will operate on.	94	The filehandle this L<AnyEvent::Handle> object will operate on.
74
75	NOTE: The filehandle will be set to non-blocking (using	95	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	96	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		97	that mode.
77		98
		99	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		100
		101	Try to connect to the specified host and service (port), using
		102	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		103	default C<peername>.
		104
		105	You have to specify either this parameter, or C<fh>, above.
		106
		107	It is possible to push requests on the read and write queues, and modify
		108	properties of the stream, even while AnyEvent::Handle is connecting.
		109
		110	When this parameter is specified, then the C<on_prepare>,
		111	C<on_connect_error> and C<on_connect> callbacks will be called under the
		112	appropriate circumstances:
		113
		114	=over 4
		115
78	=item on_eof => $cb->($handle)	116	=item on_prepare => $cb->($handle)
79		117
80	Set the callback to be called when an end-of-file condition is detcted,	118	This (rarely used) callback is called before a new connection is
81	i.e. in the case of a socket, when the other side has closed the	119	attempted, but after the file handle has been created (you can access that
82	connection cleanly.	120	file handle via C<< $handle->{fh} >>). It could be used to prepare the
		121	file handle with parameters required for the actual connect (as opposed to
		122	settings that can be changed when the connection is already established).
83		123
84	While not mandatory, it is highly recommended to set an eof callback,	124	The return value of this callback should be the connect timeout value in
85	otherwise you might end up with a closed socket while you are still	125	seconds (or C<0>, or C<undef>, or the empty list, to indicate that the
86	waiting for data.	126	default timeout is to be used).
87		127
		128	=item on_connect => $cb->($handle, $host, $port, $retry->())
		129
		130	This callback is called when a connection has been successfully established.
		131
		132	The peer's numeric host and port (the socket peername) are passed as
		133	parameters, together with a retry callback. At the time it is called the
		134	read and write queues, EOF status, TLS status and similar properties of
		135	the handle will have been reset.
		136
		137	It is not allowed to use the read or write queues while the handle object
		138	is connecting.
		139
		140	If, for some reason, the handle is not acceptable, calling C<$retry> will
		141	continue with the next connection target (in case of multi-homed hosts or
		142	SRV records there can be multiple connection endpoints). The C<$retry>
		143	callback can be invoked after the connect callback returns, i.e. one can
		144	start a handshake and then decide to retry with the next host if the
		145	handshake fails.
		146
		147	In most cases, you should ignore the C<$retry> parameter.
		148
		149	=item on_connect_error => $cb->($handle, $message)
		150
		151	This callback is called when the connection could not be
		152	established. C<$!> will contain the relevant error code, and C<$message> a
		153	message describing it (usually the same as C<"$!">).
		154
		155	If this callback isn't specified, then C<on_error> will be called with a
		156	fatal error instead.
		157
		158	=back
		159
88	=item on_error => $cb->($handle, $fatal)	160	=item on_error => $cb->($handle, $fatal, $message)
89		161
90	This is the error callback, which is called when, well, some error	162	This is the error callback, which is called when, well, some error
91	occured, such as not being able to resolve the hostname, failure to	163	occured, such as not being able to resolve the hostname, failure to
92	connect or a read error.	164	connect, or a read error.
93		165
94	Some errors are fatal (which is indicated by C<$fatal> being true). On	166	Some errors are fatal (which is indicated by C<$fatal> being true). On
95	fatal errors the handle object will be shut down and will not be	167	fatal errors the handle object will be destroyed (by a call to C<< ->
		168	destroy >>) after invoking the error callback (which means you are free to
		169	examine the handle object). Examples of fatal errors are an EOF condition
		170	with active (but unsatisfiable) read watchers (C<EPIPE>) or I/O errors. In
		171	cases where the other side can close the connection at will, it is
		172	often easiest to not report C<EPIPE> errors in this callback.
		173
		174	AnyEvent::Handle tries to find an appropriate error code for you to check
		175	against, but in some cases (TLS errors), this does not work well.
		176
		177	If you report the error to the user, it is recommended to always output
		178	the C<$message> argument in human-readable error messages (you don't need
		179	to report C<"$!"> if you report C<$message>).
		180
		181	If you want to react programmatically to the error, then looking at C<$!>
		182	and comparing it against some of the documented C<Errno> values is usually
		183	better than looking at the C<$message>.
		184
96	usable. Non-fatal errors can be retried by simply returning, but it is	185	Non-fatal errors can be retried by returning, but it is recommended
97	recommended to simply ignore this parameter and instead abondon the handle	186	to simply ignore this parameter and instead abondon the handle object
98	object when this callback is invoked.	187	when this callback is invoked. Examples of non-fatal errors are timeouts
		188	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
99		189
100	On callback entrance, the value of C<$!> contains the operating system	190	On entry to the callback, the value of C<$!> contains the operating
101	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	191	system error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		192	C<EPROTO>).
102		193
103	While not mandatory, it is I<highly> recommended to set this callback, as	194	While not mandatory, it is I<highly> recommended to set this callback, as
104	you will not be notified of errors otherwise. The default simply calls	195	you will not be notified of errors otherwise. The default just calls
105	C<croak>.	196	C<croak>.
106		197
107	=item on_read => $cb->($handle)	198	=item on_read => $cb->($handle)
108		199
109	This sets the default read callback, which is called when data arrives	200	This sets the default read callback, which is called when data arrives
110	and no read request is in the queue (unlike read queue callbacks, this	201	and no read request is in the queue (unlike read queue callbacks, this
111	callback will only be called when at least one octet of data is in the	202	callback will only be called when at least one octet of data is in the
112	read buffer).	203	read buffer).
113		204
114	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	205	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
115	method or access the C<$handle->{rbuf}> member directly.	206	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		207	must not enlarge or modify the read buffer, you can only remove data at
		208	the beginning from it.
116		209
		210	You can also call C<< ->push_read (...) >> or any other function that
		211	modifies the read queue. Or do both. Or ...
		212
117	When an EOF condition is detected then AnyEvent::Handle will first try to	213	When an EOF condition is detected, AnyEvent::Handle will first try to
118	feed all the remaining data to the queued callbacks and C<on_read> before	214	feed all the remaining data to the queued callbacks and C<on_read> before
119	calling the C<on_eof> callback. If no progress can be made, then a fatal	215	calling the C<on_eof> callback. If no progress can be made, then a fatal
120	error will be raised (with C<$!> set to C<EPIPE>).	216	error will be raised (with C<$!> set to C<EPIPE>).
121		217
		218	Note that, unlike requests in the read queue, an C<on_read> callback
		219	doesn't mean you I<require> some data: if there is an EOF and there
		220	are outstanding read requests then an error will be flagged. With an
		221	C<on_read> callback, the C<on_eof> callback will be invoked.
		222
		223	=item on_eof => $cb->($handle)
		224
		225	Set the callback to be called when an end-of-file condition is detected,
		226	i.e. in the case of a socket, when the other side has closed the
		227	connection cleanly, and there are no outstanding read requests in the
		228	queue (if there are read requests, then an EOF counts as an unexpected
		229	connection close and will be flagged as an error).
		230
		231	For sockets, this just means that the other side has stopped sending data,
		232	you can still try to write data, and, in fact, one can return from the EOF
		233	callback and continue writing data, as only the read part has been shut
		234	down.
		235
		236	If an EOF condition has been detected but no C<on_eof> callback has been
		237	set, then a fatal error will be raised with C<$!> set to <0>.
		238
122	=item on_drain => $cb->($handle)	239	=item on_drain => $cb->($handle)
123		240
124	This sets the callback that is called when the write buffer becomes empty	241	This sets the callback that is called once when the write buffer becomes
125	(or when the callback is set and the buffer is empty already).	242	empty (and immediately when the handle object is created).
126		243
127	To append to the write buffer, use the C<< ->push_write >> method.	244	To append to the write buffer, use the C<< ->push_write >> method.
128		245
		246	This callback is useful when you don't want to put all of your write data
		247	into the queue at once, for example, when you want to write the contents
		248	of some file to the socket you might not want to read the whole file into
		249	memory and push it into the queue, but instead only read more data from
		250	the file when the write queue becomes empty.
		251
129	=item timeout => $fractional_seconds	252	=item timeout => $fractional_seconds
130		253
		254	=item rtimeout => $fractional_seconds
		255
		256	=item wtimeout => $fractional_seconds
		257
131	If non-zero, then this enables an "inactivity" timeout: whenever this many	258	If non-zero, then these enables an "inactivity" timeout: whenever this
132	seconds pass without a successful read or write on the underlying file	259	many seconds pass without a successful read or write on the underlying
133	handle, the C<on_timeout> callback will be invoked (and if that one is	260	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
134	missing, an C<ETIMEDOUT> error will be raised).	261	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		262	error will be raised).
135		263
		264	There are three variants of the timeouts that work independently of each
		265	other, for both read and write (triggered when nothing was read I<OR>
		266	written), just read (triggered when nothing was read), and just write:
		267	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		268	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		269	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
		270
136	Note that timeout processing is also active when you currently do not have	271	Note that timeout processing is active even when you do not have any
137	any outstanding read or write requests: If you plan to keep the connection	272	outstanding read or write requests: If you plan to keep the connection
138	idle then you should disable the timout temporarily or ignore the timeout	273	idle then you should disable the timeout temporarily or ignore the
139	in the C<on_timeout> callback.	274	timeout in the corresponding C<on_timeout> callback, in which case
		275	AnyEvent::Handle will simply restart the timeout.
140		276
141	Zero (the default) disables this timeout.	277	Zero (the default) disables the corresponding timeout.
142		278
143	=item on_timeout => $cb->($handle)	279	=item on_timeout => $cb->($handle)
		280
		281	=item on_rtimeout => $cb->($handle)
		282
		283	=item on_wtimeout => $cb->($handle)
144		284
145	Called whenever the inactivity timeout passes. If you return from this	285	Called whenever the inactivity timeout passes. If you return from this
146	callback, then the timeout will be reset as if some activity had happened,	286	callback, then the timeout will be reset as if some activity had happened,
147	so this condition is not fatal in any way.	287	so this condition is not fatal in any way.
148		288
149	=item rbuf_max => <bytes>	289	=item rbuf_max => <bytes>
150		290
151	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	291	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
152	when the read buffer ever (strictly) exceeds this size. This is useful to	292	when the read buffer ever (strictly) exceeds this size. This is useful to
153	avoid denial-of-service attacks.	293	avoid some forms of denial-of-service attacks.
154		294
155	For example, a server accepting connections from untrusted sources should	295	For example, a server accepting connections from untrusted sources should
156	be configured to accept only so-and-so much data that it cannot act on	296	be configured to accept only so-and-so much data that it cannot act on
157	(for example, when expecting a line, an attacker could send an unlimited	297	(for example, when expecting a line, an attacker could send an unlimited
158	amount of data without a callback ever being called as long as the line	298	amount of data without a callback ever being called as long as the line
159	isn't finished).	299	isn't finished).
160		300
		301	=item wbuf_max => <bytes>
		302
		303	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
		304	when the write buffer ever (strictly) exceeds this size. This is useful to
		305	avoid some forms of denial-of-service attacks.
		306
		307	Although the units of this parameter is bytes, this is the I<raw> number
		308	of bytes not yet accepted by the kernel. This can make a difference when
		309	you e.g. use TLS, as TLS typically makes your write data larger (but it
		310	can also make it smaller due to compression).
		311
		312	As an example of when this limit is useful, take a chat server that sends
		313	chat messages to a client. If the client does not read those in a timely
		314	manner then the send buffer in the server would grow unbounded.
		315
		316	=item autocork => <boolean>
		317
		318	When disabled (the default), C<push_write> will try to immediately
		319	write the data to the handle if possible. This avoids having to register
		320	a write watcher and wait for the next event loop iteration, but can
		321	be inefficient if you write multiple small chunks (on the wire, this
		322	disadvantage is usually avoided by your kernel's nagle algorithm, see
		323	C<no_delay>, but this option can save costly syscalls).
		324
		325	When enabled, writes will always be queued till the next event loop
		326	iteration. This is efficient when you do many small writes per iteration,
		327	but less efficient when you do a single write only per iteration (or when
		328	the write buffer often is full). It also increases write latency.
		329
		330	=item no_delay => <boolean>
		331
		332	When doing small writes on sockets, your operating system kernel might
		333	wait a bit for more data before actually sending it out. This is called
		334	the Nagle algorithm, and usually it is beneficial.
		335
		336	In some situations you want as low a delay as possible, which can be
		337	accomplishd by setting this option to a true value.
		338
		339	The default is your operating system's default behaviour (most likely
		340	enabled). This option explicitly enables or disables it, if possible.
		341
		342	=item keepalive => <boolean>
		343
		344	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		345	normally, TCP connections have no time-out once established, so TCP
		346	connections, once established, can stay alive forever even when the other
		347	side has long gone. TCP keepalives are a cheap way to take down long-lived
		348	TCP connections when the other side becomes unreachable. While the default
		349	is OS-dependent, TCP keepalives usually kick in after around two hours,
		350	and, if the other side doesn't reply, take down the TCP connection some 10
		351	to 15 minutes later.
		352
		353	It is harmless to specify this option for file handles that do not support
		354	keepalives, and enabling it on connections that are potentially long-lived
		355	is usually a good idea.
		356
		357	=item oobinline => <boolean>
		358
		359	BSD majorly fucked up the implementation of TCP urgent data. The result
		360	is that almost no OS implements TCP according to the specs, and every OS
		361	implements it slightly differently.
		362
		363	If you want to handle TCP urgent data, then setting this flag (the default
		364	is enabled) gives you the most portable way of getting urgent data, by
		365	putting it into the stream.
		366
		367	Since BSD emulation of OOB data on top of TCP's urgent data can have
		368	security implications, AnyEvent::Handle sets this flag automatically
		369	unless explicitly specified. Note that setting this flag after
		370	establishing a connection I<may> be a bit too late (data loss could
		371	already have occured on BSD systems), but at least it will protect you
		372	from most attacks.
		373
161	=item read_size => <bytes>	374	=item read_size => <bytes>
162		375
163	The default read block size (the amount of bytes this module will try to read	376	The initial read block size, the number of bytes this module will try
164	during each (loop iteration). Default: C<8192>.	377	to read during each loop iteration. Each handle object will consume
		378	at least this amount of memory for the read buffer as well, so when
		379	handling many connections watch out for memory requirements). See also
		380	C<max_read_size>. Default: C<2048>.
		381
		382	=item max_read_size => <bytes>
		383
		384	The maximum read buffer size used by the dynamic adjustment
		385	algorithm: Each time AnyEvent::Handle can read C<read_size> bytes in
		386	one go it will double C<read_size> up to the maximum given by this
		387	option. Default: C<131072> or C<read_size>, whichever is higher.
165		388
166	=item low_water_mark => <bytes>	389	=item low_water_mark => <bytes>
167		390
168	Sets the amount of bytes (default: C<0>) that make up an "empty" write	391	Sets the number of bytes (default: C<0>) that make up an "empty" write
169	buffer: If the write reaches this size or gets even samller it is	392	buffer: If the buffer reaches this size or gets even samller it is
170	considered empty.	393	considered empty.
171		394
		395	Sometimes it can be beneficial (for performance reasons) to add data to
		396	the write buffer before it is fully drained, but this is a rare case, as
		397	the operating system kernel usually buffers data as well, so the default
		398	is good in almost all cases.
		399
172	=item linger => <seconds>	400	=item linger => <seconds>
173		401
174	If non-zero (default: C<3600>), then the destructor of the	402	If this is non-zero (default: C<3600>), the destructor of the
175	AnyEvent::Handle object will check wether there is still outstanding write	403	AnyEvent::Handle object will check whether there is still outstanding
176	data and will install a watcher that will write out this data. No errors	404	write data and will install a watcher that will write this data to the
177	will be reported (this mostly matches how the operating system treats	405	socket. No errors will be reported (this mostly matches how the operating
178	outstanding data at socket close time).	406	system treats outstanding data at socket close time).
179		407
180	This will not work for partial TLS data that could not yet been	408	This will not work for partial TLS data that could not be encoded
181	encoded. This data will be lost.	409	yet. This data will be lost. Calling the C<stoptls> method in time might
		410	help.
		411
		412	=item peername => $string
		413
		414	A string used to identify the remote site - usually the DNS hostname
		415	(I<not> IDN!) used to create the connection, rarely the IP address.
		416
		417	Apart from being useful in error messages, this string is also used in TLS
		418	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		419	verification will be skipped when C<peername> is not specified or is
		420	C<undef>.
182		421
183	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	422	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
184		423
185	When this parameter is given, it enables TLS (SSL) mode, that means it	424	When this parameter is given, it enables TLS (SSL) mode, that means
186	will start making tls handshake and will transparently encrypt/decrypt	425	AnyEvent will start a TLS handshake as soon as the connection has been
187	data.	426	established and will transparently encrypt/decrypt data afterwards.
		427
		428	All TLS protocol errors will be signalled as C<EPROTO>, with an
		429	appropriate error message.
188		430
189	TLS mode requires Net::SSLeay to be installed (it will be loaded	431	TLS mode requires Net::SSLeay to be installed (it will be loaded
190	automatically when you try to create a TLS handle).	432	automatically when you try to create a TLS handle): this module doesn't
		433	have a dependency on that module, so if your module requires it, you have
		434	to add the dependency yourself. If Net::SSLeay cannot be loaded or is too
		435	old, you get an C<EPROTO> error.
191		436
192	For the TLS server side, use C<accept>, and for the TLS client side of a	437	Unlike TCP, TLS has a server and client side: for the TLS server side, use
193	connection, use C<connect> mode.	438	C<accept>, and for the TLS client side of a connection, use C<connect>
		439	mode.
194		440
195	You can also provide your own TLS connection object, but you have	441	You can also provide your own TLS connection object, but you have
196	to make sure that you call either C<Net::SSLeay::set_connect_state>	442	to make sure that you call either C<Net::SSLeay::set_connect_state>
197	or C<Net::SSLeay::set_accept_state> on it before you pass it to	443	or C<Net::SSLeay::set_accept_state> on it before you pass it to
198	AnyEvent::Handle.	444	AnyEvent::Handle. Also, this module will take ownership of this connection
		445	object.
199		446
		447	At some future point, AnyEvent::Handle might switch to another TLS
		448	implementation, then the option to use your own session object will go
		449	away.
		450
		451	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		452	passing in the wrong integer will lead to certain crash. This most often
		453	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		454	segmentation fault.
		455
200	See the C<starttls> method if you need to start TLs negotiation later.	456	Use the C<< ->starttls >> method if you need to start TLS negotiation later.
201		457
202	=item tls_ctx => $ssl_ctx	458	=item tls_ctx => $anyevent_tls
203		459
204	Use the given Net::SSLeay::CTX object to create the new TLS connection	460	Use the given C<AnyEvent::TLS> object to create the new TLS connection
205	(unless a connection object was specified directly). If this parameter is	461	(unless a connection object was specified directly). If this
206	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	462	parameter is missing (or C<undef>), then AnyEvent::Handle will use
		463	C<AnyEvent::Handle::TLS_CTX>.
207		464
		465	Instead of an object, you can also specify a hash reference with C<< key
		466	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		467	new TLS context object.
		468
		469	=item on_starttls => $cb->($handle, $success[, $error_message])
		470
		471	This callback will be invoked when the TLS/SSL handshake has finished. If
		472	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		473	(C<on_stoptls> will not be called in this case).
		474
		475	The session in C<< $handle->{tls} >> can still be examined in this
		476	callback, even when the handshake was not successful.
		477
		478	TLS handshake failures will not cause C<on_error> to be invoked when this
		479	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		480
		481	Without this callback, handshake failures lead to C<on_error> being
		482	called as usual.
		483
		484	Note that you cannot just call C<starttls> again in this callback. If you
		485	need to do that, start an zero-second timer instead whose callback can
		486	then call C<< ->starttls >> again.
		487
		488	=item on_stoptls => $cb->($handle)
		489
		490	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		491	set, then it will be invoked after freeing the TLS session. If it is not,
		492	then a TLS shutdown condition will be treated like a normal EOF condition
		493	on the handle.
		494
		495	The session in C<< $handle->{tls} >> can still be examined in this
		496	callback.
		497
		498	This callback will only be called on TLS shutdowns, not when the
		499	underlying handle signals EOF.
		500
208	=item json => JSON or JSON::XS object	501	=item json => L<JSON>, L<JSON::PP> or L<JSON::XS> object
209		502
210	This is the json coder object used by the C<json> read and write types.	503	This is the json coder object used by the C<json> read and write types.
211		504
212	If you don't supply it, then AnyEvent::Handle will create and use a	505	If you don't supply it, then AnyEvent::Handle will create and use a
213	suitable one, which will write and expect UTF-8 encoded JSON texts.	506	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		507	texts.
214		508
		509	=item cbor => L<CBOR::XS> object
		510
		511	This is the cbor coder object used by the C<cbor> read and write types.
		512
		513	If you don't supply it, then AnyEvent::Handle will create and use a
		514	suitable one (on demand), which will write CBOR without using extensions,
		515	if possible. texts.
		516
215	Note that you are responsible to depend on the JSON module if you want to	517	Note that you are responsible to depend on the L<CBOR::XS> module if you
216	use this functionality, as AnyEvent does not have a dependency itself.	518	want to use this functionality, as AnyEvent does not have a dependency on
217		519	it itself.
218	=item filter_r => $cb
219
220	=item filter_w => $cb
221
222	These exist, but are undocumented at this time.
223		520
224	=back	521	=back
225		522
226	=cut	523	=cut
227		524
228	sub new {	525	sub new {
229	my $class = shift;	526	my $class = shift;
230
231	my $self = bless { @_ }, $class;	527	my $self = bless { @_ }, $class;
232		528
233	$self->{fh} or Carp::croak "mandatory argument fh is missing";	529	if ($self->{fh}) {
		530	$self->_start;
		531	return unless $self->{fh}; # could be gone by now
		532
		533	} elsif ($self->{connect}) {
		534	require AnyEvent::Socket;
		535
		536	$self->{peername} = $self->{connect}[0]
		537	unless exists $self->{peername};
		538
		539	$self->{_skip_drain_rbuf} = 1;
		540
		541	{
		542	Scalar::Util::weaken (my $self = $self);
		543
		544	$self->{_connect} =
		545	AnyEvent::Socket::tcp_connect (
		546	$self->{connect}[0],
		547	$self->{connect}[1],
		548	sub {
		549	my ($fh, $host, $port, $retry) = @_;
		550
		551	delete $self->{_connect}; # no longer needed
		552
		553	if ($fh) {
		554	$self->{fh} = $fh;
		555
		556	delete $self->{_skip_drain_rbuf};
		557	$self->_start;
		558
		559	$self->{on_connect}
		560	and $self->{on_connect}($self, $host, $port, sub {
		561	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		562	$self->{_skip_drain_rbuf} = 1;
		563	&$retry;
		564	});
		565
		566	} else {
		567	if ($self->{on_connect_error}) {
		568	$self->{on_connect_error}($self, "$!");
		569	$self->destroy if $self;
		570	} else {
		571	$self->_error ($!, 1);
		572	}
		573	}
		574	},
		575	sub {
		576	local $self->{fh} = $_[0];
		577
		578	$self->{on_prepare}
		579	? $self->{on_prepare}->($self)
		580	: ()
		581	}
		582	);
		583	}
		584
		585	} else {
		586	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		587	}
		588
		589	$self
		590	}
		591
		592	sub _start {
		593	my ($self) = @_;
		594
		595	# too many clueless people try to use udp and similar sockets
		596	# with AnyEvent::Handle, do them a favour.
		597	my $type = getsockopt $self->{fh}, Socket::SOL_SOCKET (), Socket::SO_TYPE ();
		598	Carp::croak "AnyEvent::Handle: only stream sockets supported, anything else will NOT work!"
		599	if Socket::SOCK_STREAM () != (unpack "I", $type) && defined $type;
234		600
235	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	601	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
236		602
237	if ($self->{tls}) {	603	$self->{_activity} =
238	require Net::SSLeay;	604	$self->{_ractivity} =
		605	$self->{_wactivity} = AE::now;
		606
		607	$self->{read_size} ||= 2048;
		608	$self->{max_read_size} = $self->{read_size}
		609	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		610
		611	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		612	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		613	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		614
		615	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		616	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		617
		618	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		619
239	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	620	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
240	}	621	if $self->{tls};
241		622
242	$self->{_activity} = AnyEvent->now;
243	$self->_timeout;
244
245	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	623	$self->on_drain (delete $self->{on_drain} ) if $self->{on_drain};
246		624
247	$self->start_read	625	$self->start_read
248	if $self->{on_read};	626	if $self->{on_read} || @{ $self->{_queue} };
249		627
250	$self	628	$self->_drain_wbuf;
251	}
252
253	sub _shutdown {
254	my ($self) = @_;
255
256	delete $self->{_tw};
257	delete $self->{_rw};
258	delete $self->{_ww};
259	delete $self->{fh};
260
261	$self->stoptls;
262	}	629	}
263		630
264	sub _error {	631	sub _error {
265	my ($self, $errno, $fatal) = @_;	632	my ($self, $errno, $fatal, $message) = @_;
266
267	$self->_shutdown
268	if $fatal;
269		633
270	$! = $errno;	634	$! = $errno;
		635	$message ||= "$!";
271		636
272	if ($self->{on_error}) {	637	if ($self->{on_error}) {
273	$self->{on_error}($self, $fatal);	638	$self->{on_error}($self, $fatal, $message);
274	} else {	639	$self->destroy if $fatal;
		640	} elsif ($self->{fh} || $self->{connect}) {
		641	$self->destroy;
275	Carp::croak "AnyEvent::Handle uncaught error: $!";	642	Carp::croak "AnyEvent::Handle uncaught error: $message";
276	}	643	}
277	}	644	}
278		645
279	=item $fh = $handle->fh	646	=item $fh = $handle->fh
280		647
281	This method returns the file handle of the L<AnyEvent::Handle> object.	648	This method returns the file handle used to create the L<AnyEvent::Handle> object.
282		649
283	=cut	650	=cut
284		651
285	sub fh { $_[0]{fh} }	652	sub fh { $_[0]{fh} }
286		653
…		…
304	$_[0]{on_eof} = $_[1];	671	$_[0]{on_eof} = $_[1];
305	}	672	}
306		673
307	=item $handle->on_timeout ($cb)	674	=item $handle->on_timeout ($cb)
308		675
309	Replace the current C<on_timeout> callback, or disables the callback	676	=item $handle->on_rtimeout ($cb)
310	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor
311	argument.
312		677
313	=cut	678	=item $handle->on_wtimeout ($cb)
314		679
		680	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
		681	callback, or disables the callback (but not the timeout) if C<$cb> =
		682	C<undef>. See the C<timeout> constructor argument and method.
		683
		684	=cut
		685
		686	# see below
		687
		688	=item $handle->autocork ($boolean)
		689
		690	Enables or disables the current autocork behaviour (see C<autocork>
		691	constructor argument). Changes will only take effect on the next write.
		692
		693	=cut
		694
		695	sub autocork {
		696	$_[0]{autocork} = $_[1];
		697	}
		698
		699	=item $handle->no_delay ($boolean)
		700
		701	Enables or disables the C<no_delay> setting (see constructor argument of
		702	the same name for details).
		703
		704	=cut
		705
		706	sub no_delay {
		707	$_[0]{no_delay} = $_[1];
		708
		709	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		710	if $_[0]{fh};
		711	}
		712
		713	=item $handle->keepalive ($boolean)
		714
		715	Enables or disables the C<keepalive> setting (see constructor argument of
		716	the same name for details).
		717
		718	=cut
		719
		720	sub keepalive {
		721	$_[0]{keepalive} = $_[1];
		722
		723	eval {
		724	local $SIG{__DIE__};
		725	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		726	if $_[0]{fh};
		727	};
		728	}
		729
		730	=item $handle->oobinline ($boolean)
		731
		732	Enables or disables the C<oobinline> setting (see constructor argument of
		733	the same name for details).
		734
		735	=cut
		736
		737	sub oobinline {
		738	$_[0]{oobinline} = $_[1];
		739
		740	eval {
		741	local $SIG{__DIE__};
		742	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		743	if $_[0]{fh};
		744	};
		745	}
		746
		747	=item $handle->keepalive ($boolean)
		748
		749	Enables or disables the C<keepalive> setting (see constructor argument of
		750	the same name for details).
		751
		752	=cut
		753
		754	sub keepalive {
		755	$_[0]{keepalive} = $_[1];
		756
		757	eval {
		758	local $SIG{__DIE__};
		759	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		760	if $_[0]{fh};
		761	};
		762	}
		763
		764	=item $handle->on_starttls ($cb)
		765
		766	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		767
		768	=cut
		769
		770	sub on_starttls {
		771	$_[0]{on_starttls} = $_[1];
		772	}
		773
		774	=item $handle->on_stoptls ($cb)
		775
		776	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		777
		778	=cut
		779
315	sub on_timeout {	780	sub on_stoptls {
316	$_[0]{on_timeout} = $_[1];	781	$_[0]{on_stoptls} = $_[1];
		782	}
		783
		784	=item $handle->rbuf_max ($max_octets)
		785
		786	Configures the C<rbuf_max> setting (C<undef> disables it).
		787
		788	=item $handle->wbuf_max ($max_octets)
		789
		790	Configures the C<wbuf_max> setting (C<undef> disables it).
		791
		792	=cut
		793
		794	sub rbuf_max {
		795	$_[0]{rbuf_max} = $_[1];
		796	}
		797
		798	sub wbuf_max {
		799	$_[0]{wbuf_max} = $_[1];
317	}	800	}
318		801
319	#############################################################################	802	#############################################################################
320		803
321	=item $handle->timeout ($seconds)	804	=item $handle->timeout ($seconds)
322		805
		806	=item $handle->rtimeout ($seconds)
		807
		808	=item $handle->wtimeout ($seconds)
		809
323	Configures (or disables) the inactivity timeout.	810	Configures (or disables) the inactivity timeout.
324		811
325	=cut	812	The timeout will be checked instantly, so this method might destroy the
		813	handle before it returns.
326		814
327	sub timeout {	815	=item $handle->timeout_reset
		816
		817	=item $handle->rtimeout_reset
		818
		819	=item $handle->wtimeout_reset
		820
		821	Reset the activity timeout, as if data was received or sent.
		822
		823	These methods are cheap to call.
		824
		825	=cut
		826
		827	for my $dir ("", "r", "w") {
		828	my $timeout = "${dir}timeout";
		829	my $tw = "_${dir}tw";
		830	my $on_timeout = "on_${dir}timeout";
		831	my $activity = "_${dir}activity";
		832	my $cb;
		833
		834	*$on_timeout = sub {
		835	$_[0]{$on_timeout} = $_[1];
		836	};
		837
		838	*$timeout = sub {
328	my ($self, $timeout) = @_;	839	my ($self, $new_value) = @_;
329		840
		841	$new_value >= 0
		842	or Carp::croak "AnyEvent::Handle->$timeout called with negative timeout ($new_value), caught";
		843
330	$self->{timeout} = $timeout;	844	$self->{$timeout} = $new_value;
331	$self->_timeout;	845	delete $self->{$tw}; &$cb;
332	}	846	};
333		847
		848	*{"${dir}timeout_reset"} = sub {
		849	$_[0]{$activity} = AE::now;
		850	};
		851
		852	# main workhorse:
334	# reset the timeout watcher, as neccessary	853	# reset the timeout watcher, as neccessary
335	# also check for time-outs	854	# also check for time-outs
336	sub _timeout {	855	$cb = sub {
337	my ($self) = @_;	856	my ($self) = @_;
338		857
339	if ($self->{timeout}) {	858	if ($self->{$timeout} && $self->{fh}) {
340	my $NOW = AnyEvent->now;	859	my $NOW = AE::now;
341		860
342	# when would the timeout trigger?	861	# when would the timeout trigger?
343	my $after = $self->{_activity} + $self->{timeout} - $NOW;	862	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
344		863
345	# now or in the past already?	864	# now or in the past already?
346	if ($after <= 0) {	865	if ($after <= 0) {
347	$self->{_activity} = $NOW;	866	$self->{$activity} = $NOW;
348		867
349	if ($self->{on_timeout}) {	868	if ($self->{$on_timeout}) {
350	$self->{on_timeout}($self);	869	$self->{$on_timeout}($self);
351	} else {	870	} else {
352	$self->_error (&Errno::ETIMEDOUT);	871	$self->_error (Errno::ETIMEDOUT);
		872	}
		873
		874	# callback could have changed timeout value, optimise
		875	return unless $self->{$timeout};
		876
		877	# calculate new after
		878	$after = $self->{$timeout};
353	}	879	}
354		880
355	# callback could have changed timeout value, optimise	881	Scalar::Util::weaken $self;
356	return unless $self->{timeout};	882	return unless $self; # ->error could have destroyed $self
357		883
358	# calculate new after	884	$self->{$tw} ||= AE::timer $after, 0, sub {
359	$after = $self->{timeout};	885	delete $self->{$tw};
		886	$cb->($self);
		887	};
		888	} else {
		889	delete $self->{$tw};
360	}	890	}
361
362	Scalar::Util::weaken $self;
363	return unless $self; # ->error could have destroyed $self
364
365	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
366	delete $self->{_tw};
367	$self->_timeout;
368	});
369	} else {
370	delete $self->{_tw};
371	}	891	}
372	}	892	}
373		893
374	#############################################################################	894	#############################################################################
375		895
…		…
382		902
383	The write queue is very simple: you can add data to its end, and	903	The write queue is very simple: you can add data to its end, and
384	AnyEvent::Handle will automatically try to get rid of it for you.	904	AnyEvent::Handle will automatically try to get rid of it for you.
385		905
386	When data could be written and the write buffer is shorter then the low	906	When data could be written and the write buffer is shorter then the low
387	water mark, the C<on_drain> callback will be invoked.	907	water mark, the C<on_drain> callback will be invoked once.
388		908
389	=over 4	909	=over 4
390		910
391	=item $handle->on_drain ($cb)	911	=item $handle->on_drain ($cb)
392		912
393	Sets the C<on_drain> callback or clears it (see the description of	913	Sets the C<on_drain> callback or clears it (see the description of
394	C<on_drain> in the constructor).	914	C<on_drain> in the constructor).
395		915
		916	This method may invoke callbacks (and therefore the handle might be
		917	destroyed after it returns).
		918
396	=cut	919	=cut
397		920
398	sub on_drain {	921	sub on_drain {
399	my ($self, $cb) = @_;	922	my ($self, $cb) = @_;
400		923
401	$self->{on_drain} = $cb;	924	$self->{on_drain} = $cb;
402		925
403	$cb->($self)	926	$cb->($self)
404	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	927	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
405	}	928	}
406		929
407	=item $handle->push_write ($data)	930	=item $handle->push_write ($data)
408		931
409	Queues the given scalar to be written. You can push as much data as you	932	Queues the given scalar to be written. You can push as much data as
410	want (only limited by the available memory), as C<AnyEvent::Handle>	933	you want (only limited by the available memory and C<wbuf_max>), as
411	buffers it independently of the kernel.	934	C<AnyEvent::Handle> buffers it independently of the kernel.
		935
		936	This method may invoke callbacks (and therefore the handle might be
		937	destroyed after it returns).
412		938
413	=cut	939	=cut
414		940
415	sub _drain_wbuf {	941	sub _drain_wbuf {
416	my ($self) = @_;	942	my ($self) = @_;
…		…
420	Scalar::Util::weaken $self;	946	Scalar::Util::weaken $self;
421		947
422	my $cb = sub {	948	my $cb = sub {
423	my $len = syswrite $self->{fh}, $self->{wbuf};	949	my $len = syswrite $self->{fh}, $self->{wbuf};
424		950
425	if ($len >= 0) {	951	if (defined $len) {
426	substr $self->{wbuf}, 0, $len, "";	952	substr $self->{wbuf}, 0, $len, "";
427		953
428	$self->{_activity} = AnyEvent->now;	954	$self->{_activity} = $self->{_wactivity} = AE::now;
429		955
430	$self->{on_drain}($self)	956	$self->{on_drain}($self)
431	if $self->{low_water_mark} >= length $self->{wbuf}	957	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
432	&& $self->{on_drain};	958	&& $self->{on_drain};
433		959
434	delete $self->{_ww} unless length $self->{wbuf};	960	delete $self->{_ww} unless length $self->{wbuf};
435	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	961	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
436	$self->_error ($!, 1);	962	$self->_error ($!, 1);
437	}	963	}
438	};	964	};
439		965
440	# try to write data immediately	966	# try to write data immediately
441	$cb->();	967	$cb->() unless $self->{autocork};
442		968
443	# if still data left in wbuf, we need to poll	969	# if still data left in wbuf, we need to poll
444	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	970	$self->{_ww} = AE::io $self->{fh}, 1, $cb
445	if length $self->{wbuf};	971	if length $self->{wbuf};
		972
		973	if (
		974	defined $self->{wbuf_max}
		975	&& $self->{wbuf_max} < length $self->{wbuf}
		976	) {
		977	$self->_error (Errno::ENOSPC, 1), return;
		978	}
446	};	979	};
447	}	980	}
448		981
449	our %WH;	982	our %WH;
450		983
		984	# deprecated
451	sub register_write_type($$) {	985	sub register_write_type($$) {
452	$WH{$_[0]} = $_[1];	986	$WH{$_[0]} = $_[1];
453	}	987	}
454		988
455	sub push_write {	989	sub push_write {
456	my $self = shift;	990	my $self = shift;
457		991
458	if (@_ > 1) {	992	if (@_ > 1) {
459	my $type = shift;	993	my $type = shift;
460		994
		995	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
461	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	996	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
462	->($self, @_);	997	->($self, @_);
463	}	998	}
464		999
		1000	# we downgrade here to avoid hard-to-track-down bugs,
		1001	# and diagnose the problem earlier and better.
		1002
465	if ($self->{filter_w}) {	1003	if ($self->{tls}) {
466	$self->{filter_w}($self, \$_[0]);	1004	utf8::downgrade $self->{_tls_wbuf} .= $_[0];
		1005	&_dotls ($self) if $self->{fh};
467	} else {	1006	} else {
468	$self->{wbuf} .= $_[0];	1007	utf8::downgrade $self->{wbuf} .= $_[0];
469	$self->_drain_wbuf;	1008	$self->_drain_wbuf if $self->{fh};
470	}	1009	}
471	}	1010	}
472		1011
473	=item $handle->push_write (type => @args)	1012	=item $handle->push_write (type => @args)
474		1013
475	Instead of formatting your data yourself, you can also let this module do	1014	Instead of formatting your data yourself, you can also let this module
476	the job by specifying a type and type-specific arguments.	1015	do the job by specifying a type and type-specific arguments. You
		1016	can also specify the (fully qualified) name of a package, in which
		1017	case AnyEvent tries to load the package and then expects to find the
		1018	C<anyevent_write_type> function inside (see "custom write types", below).
477		1019
478	Predefined types are (if you have ideas for additional types, feel free to	1020	Predefined types are (if you have ideas for additional types, feel free to
479	drop by and tell us):	1021	drop by and tell us):
480		1022
481	=over 4	1023	=over 4
…		…
488	=cut	1030	=cut
489		1031
490	register_write_type netstring => sub {	1032	register_write_type netstring => sub {
491	my ($self, $string) = @_;	1033	my ($self, $string) = @_;
492		1034
493	sprintf "%d:%s,", (length $string), $string	1035	(length $string) . ":$string,"
494	};	1036	};
495		1037
496	=item packstring => $format, $data	1038	=item packstring => $format, $data
497		1039
498	An octet string prefixed with an encoded length. The encoding C<$format>	1040	An octet string prefixed with an encoded length. The encoding C<$format>
…		…
520		1062
521	The generated JSON text is guaranteed not to contain any newlines: While	1063	The generated JSON text is guaranteed not to contain any newlines: While
522	this module doesn't need delimiters after or between JSON texts to be	1064	this module doesn't need delimiters after or between JSON texts to be
523	able to read them, many other languages depend on that.	1065	able to read them, many other languages depend on that.
524		1066
525	A simple RPC protocol that interoperates easily with others is to send	1067	A simple RPC protocol that interoperates easily with other languages is
526	JSON arrays (or objects, although arrays are usually the better choice as	1068	to send JSON arrays (or objects, although arrays are usually the better
527	they mimic how function argument passing works) and a newline after each	1069	choice as they mimic how function argument passing works) and a newline
528	JSON text:	1070	after each JSON text:
529		1071
530	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever	1072	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever
531	$handle->push_write ("\012");	1073	$handle->push_write ("\012");
532		1074
533	An AnyEvent::Handle receiver would simply use the C<json> read type and	1075	An AnyEvent::Handle receiver would simply use the C<json> read type and
…		…
536	$handle->push_read (json => sub { my $array = $_[1]; ... });	1078	$handle->push_read (json => sub { my $array = $_[1]; ... });
537		1079
538	Other languages could read single lines terminated by a newline and pass	1080	Other languages could read single lines terminated by a newline and pass
539	this line into their JSON decoder of choice.	1081	this line into their JSON decoder of choice.
540		1082
		1083	=item cbor => $perl_scalar
		1084
		1085	Encodes the given scalar into a CBOR value. Unless you provide your own
		1086	L<CBOR::XS> object, this means it will be encoded to a CBOR string not
		1087	using any extensions, if possible.
		1088
		1089	CBOR values are self-delimiting, so you can write CBOR at one end of
		1090	a handle and read them at the other end without using any additional
		1091	framing.
		1092
		1093	A simple nd very very fast RPC protocol that interoperates with
		1094	other languages is to send CBOR and receive CBOR values (arrays are
		1095	recommended):
		1096
		1097	$handle->push_write (cbor => ["method", "arg1", "arg2"]); # whatever
		1098
		1099	An AnyEvent::Handle receiver would simply use the C<cbor> read type:
		1100
		1101	$handle->push_read (cbor => sub { my $array = $_[1]; ... });
		1102
541	=cut	1103	=cut
		1104
		1105	sub json_coder() {
		1106	eval { require JSON::XS; JSON::XS->new->utf8 }
		1107	|| do { require JSON::PP; JSON::PP->new->utf8 }
		1108	}
542		1109
543	register_write_type json => sub {	1110	register_write_type json => sub {
544	my ($self, $ref) = @_;	1111	my ($self, $ref) = @_;
545		1112
546	require JSON;	1113	($self->{json} ||= json_coder)
		1114	->encode ($ref)
		1115	};
547		1116
548	$self->{json} ? $self->{json}->encode ($ref)	1117	sub cbor_coder() {
549	: JSON::encode_json ($ref)	1118	require CBOR::XS;
		1119	CBOR::XS->new
		1120	}
		1121
		1122	register_write_type cbor => sub {
		1123	my ($self, $scalar) = @_;
		1124
		1125	($self->{cbor} ||= cbor_coder)
		1126	->encode ($scalar)
550	};	1127	};
551		1128
552	=item storable => $reference	1129	=item storable => $reference
553		1130
554	Freezes the given reference using L<Storable> and writes it to the	1131	Freezes the given reference using L<Storable> and writes it to the
…		…
557	=cut	1134	=cut
558		1135
559	register_write_type storable => sub {	1136	register_write_type storable => sub {
560	my ($self, $ref) = @_;	1137	my ($self, $ref) = @_;
561		1138
562	require Storable;	1139	require Storable unless $Storable::VERSION;
563		1140
564	pack "w/a*", Storable::nfreeze ($ref)	1141	pack "w/a*", Storable::nfreeze ($ref)
565	};	1142	};
566		1143
567	=back	1144	=back
568		1145
569	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1146	=item $handle->push_shutdown
570		1147
571	This function (not method) lets you add your own types to C<push_write>.	1148	Sometimes you know you want to close the socket after writing your data
		1149	before it was actually written. One way to do that is to replace your
		1150	C<on_drain> handler by a callback that shuts down the socket (and set
		1151	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1152	replaces the C<on_drain> callback with:
		1153
		1154	sub { shutdown $_[0]{fh}, 1 }
		1155
		1156	This simply shuts down the write side and signals an EOF condition to the
		1157	the peer.
		1158
		1159	You can rely on the normal read queue and C<on_eof> handling
		1160	afterwards. This is the cleanest way to close a connection.
		1161
		1162	This method may invoke callbacks (and therefore the handle might be
		1163	destroyed after it returns).
		1164
		1165	=cut
		1166
		1167	sub push_shutdown {
		1168	my ($self) = @_;
		1169
		1170	delete $self->{low_water_mark};
		1171	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1172	}
		1173
		1174	=item custom write types - Package::anyevent_write_type $handle, @args
		1175
		1176	Instead of one of the predefined types, you can also specify the name of
		1177	a package. AnyEvent will try to load the package and then expects to find
		1178	a function named C<anyevent_write_type> inside. If it isn't found, it
		1179	progressively tries to load the parent package until it either finds the
		1180	function (good) or runs out of packages (bad).
		1181
572	Whenever the given C<type> is used, C<push_write> will invoke the code	1182	Whenever the given C<type> is used, C<push_write> will the function with
573	reference with the handle object and the remaining arguments.	1183	the handle object and the remaining arguments.
574		1184
575	The code reference is supposed to return a single octet string that will	1185	The function is supposed to return a single octet string that will be
576	be appended to the write buffer.	1186	appended to the write buffer, so you can mentally treat this function as a
		1187	"arguments to on-the-wire-format" converter.
577		1188
578	Note that this is a function, and all types registered this way will be	1189	Example: implement a custom write type C<join> that joins the remaining
579	global, so try to use unique names.	1190	arguments using the first one.
		1191
		1192	$handle->push_write (My::Type => " ", 1,2,3);
		1193
		1194	# uses the following package, which can be defined in the "My::Type" or in
		1195	# the "My" modules to be auto-loaded, or just about anywhere when the
		1196	# My::Type::anyevent_write_type is defined before invoking it.
		1197
		1198	package My::Type;
		1199
		1200	sub anyevent_write_type {
		1201	my ($handle, $delim, @args) = @_;
		1202
		1203	join $delim, @args
		1204	}
580		1205
581	=cut	1206	=cut
582		1207
583	#############################################################################	1208	#############################################################################
584		1209
…		…
593	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1218	ways, the "simple" way, using only C<on_read> and the "complex" way, using
594	a queue.	1219	a queue.
595		1220
596	In the simple case, you just install an C<on_read> callback and whenever	1221	In the simple case, you just install an C<on_read> callback and whenever
597	new data arrives, it will be called. You can then remove some data (if	1222	new data arrives, it will be called. You can then remove some data (if
598	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	1223	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you can
599	or not.	1224	leave the data there if you want to accumulate more (e.g. when only a
		1225	partial message has been received so far), or change the read queue with
		1226	e.g. C<push_read>.
600		1227
601	In the more complex case, you want to queue multiple callbacks. In this	1228	In the more complex case, you want to queue multiple callbacks. In this
602	case, AnyEvent::Handle will call the first queued callback each time new	1229	case, AnyEvent::Handle will call the first queued callback each time new
603	data arrives (also the first time it is queued) and removes it when it has	1230	data arrives (also the first time it is queued) and remove it when it has
604	done its job (see C<push_read>, below).	1231	done its job (see C<push_read>, below).
605		1232
606	This way you can, for example, push three line-reads, followed by reading	1233	This way you can, for example, push three line-reads, followed by reading
607	a chunk of data, and AnyEvent::Handle will execute them in order.	1234	a chunk of data, and AnyEvent::Handle will execute them in order.
608		1235
…		…
622	# handle xml	1249	# handle xml
623	});	1250	});
624	});	1251	});
625	});	1252	});
626		1253
627	Example 2: Implement a client for a protocol that replies either with	1254	Example 2: Implement a client for a protocol that replies either with "OK"
628	"OK" and another line or "ERROR" for one request, and 64 bytes for the	1255	and another line or "ERROR" for the first request that is sent, and 64
629	second request. Due tot he availability of a full queue, we can just	1256	bytes for the second request. Due to the availability of a queue, we can
630	pipeline sending both requests and manipulate the queue as necessary in	1257	just pipeline sending both requests and manipulate the queue as necessary
631	the callbacks:	1258	in the callbacks.
632		1259
633	# request one	1260	When the first callback is called and sees an "OK" response, it will
		1261	C<unshift> another line-read. This line-read will be queued I<before> the
		1262	64-byte chunk callback.
		1263
		1264	# request one, returns either "OK + extra line" or "ERROR"
634	$handle->push_write ("request 1\015\012");	1265	$handle->push_write ("request 1\015\012");
635		1266
636	# we expect "ERROR" or "OK" as response, so push a line read	1267	# we expect "ERROR" or "OK" as response, so push a line read
637	$handle->push_read (line => sub {	1268	$handle->push_read (line => sub {
638	# if we got an "OK", we have to _prepend_ another line,	1269	# if we got an "OK", we have to _prepend_ another line,
…		…
645	...	1276	...
646	});	1277	});
647	}	1278	}
648	});	1279	});
649		1280
650	# request two	1281	# request two, simply returns 64 octets
651	$handle->push_write ("request 2\015\012");	1282	$handle->push_write ("request 2\015\012");
652		1283
653	# simply read 64 bytes, always	1284	# simply read 64 bytes, always
654	$handle->push_read (chunk => 64, sub {	1285	$handle->push_read (chunk => 64, sub {
655	my $response = $_[1];	1286	my $response = $_[1];
…		…
661	=cut	1292	=cut
662		1293
663	sub _drain_rbuf {	1294	sub _drain_rbuf {
664	my ($self) = @_;	1295	my ($self) = @_;
665		1296
		1297	# avoid recursion
		1298	return if $self->{_skip_drain_rbuf};
666	local $self->{_in_drain} = 1;	1299	local $self->{_skip_drain_rbuf} = 1;
667
668	if (
669	defined $self->{rbuf_max}
670	&& $self->{rbuf_max} < length $self->{rbuf}
671	) {
672	return $self->_error (&Errno::ENOSPC, 1);
673	}
674		1300
675	while () {	1301	while () {
676	no strict 'refs';	1302	# we need to use a separate tls read buffer, as we must not receive data while
		1303	# we are draining the buffer, and this can only happen with TLS.
		1304	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1305	if exists $self->{_tls_rbuf};
677		1306
678	my $len = length $self->{rbuf};	1307	my $len = length $self->{rbuf};
679		1308
680	if (my $cb = shift @{ $self->{_queue} }) {	1309	if (my $cb = shift @{ $self->{_queue} }) {
681	unless ($cb->($self)) {	1310	unless ($cb->($self)) {
682	if ($self->{_eof}) {	1311	# no progress can be made
683	# no progress can be made (not enough data and no data forthcoming)	1312	# (not enough data and no data forthcoming)
684	$self->_error (&Errno::EPIPE, 1), last;	1313	$self->_error (Errno::EPIPE, 1), return
685	}	1314	if $self->{_eof};
686		1315
687	unshift @{ $self->{_queue} }, $cb;	1316	unshift @{ $self->{_queue} }, $cb;
688	last;	1317	last;
689	}	1318	}
690	} elsif ($self->{on_read}) {	1319	} elsif ($self->{on_read}) {
…		…
697	&& !@{ $self->{_queue} } # and the queue is still empty	1326	&& !@{ $self->{_queue} } # and the queue is still empty
698	&& $self->{on_read} # but we still have on_read	1327	&& $self->{on_read} # but we still have on_read
699	) {	1328	) {
700	# no further data will arrive	1329	# no further data will arrive
701	# so no progress can be made	1330	# so no progress can be made
702	$self->_error (&Errno::EPIPE, 1), last	1331	$self->_error (Errno::EPIPE, 1), return
703	if $self->{_eof};	1332	if $self->{_eof};
704		1333
705	last; # more data might arrive	1334	last; # more data might arrive
706	}	1335	}
707	} else {	1336	} else {
708	# read side becomes idle	1337	# read side becomes idle
709	delete $self->{_rw};	1338	delete $self->{_rw} unless $self->{tls};
710	last;	1339	last;
711	}	1340	}
712	}	1341	}
713		1342
		1343	if ($self->{_eof}) {
		1344	$self->{on_eof}
714	$self->{on_eof}($self)	1345	? $self->{on_eof}($self)
715	if $self->{_eof} && $self->{on_eof};	1346	: $self->_error (0, 1, "Unexpected end-of-file");
		1347
		1348	return;
		1349	}
		1350
		1351	if (
		1352	defined $self->{rbuf_max}
		1353	&& $self->{rbuf_max} < length $self->{rbuf}
		1354	) {
		1355	$self->_error (Errno::ENOSPC, 1), return;
		1356	}
716		1357
717	# may need to restart read watcher	1358	# may need to restart read watcher
718	unless ($self->{_rw}) {	1359	unless ($self->{_rw}) {
719	$self->start_read	1360	$self->start_read
720	if $self->{on_read} || @{ $self->{_queue} };	1361	if $self->{on_read} || @{ $self->{_queue} };
…		…
725		1366
726	This replaces the currently set C<on_read> callback, or clears it (when	1367	This replaces the currently set C<on_read> callback, or clears it (when
727	the new callback is C<undef>). See the description of C<on_read> in the	1368	the new callback is C<undef>). See the description of C<on_read> in the
728	constructor.	1369	constructor.
729		1370
		1371	This method may invoke callbacks (and therefore the handle might be
		1372	destroyed after it returns).
		1373
730	=cut	1374	=cut
731		1375
732	sub on_read {	1376	sub on_read {
733	my ($self, $cb) = @_;	1377	my ($self, $cb) = @_;
734		1378
735	$self->{on_read} = $cb;	1379	$self->{on_read} = $cb;
736	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1380	$self->_drain_rbuf if $cb;
737	}	1381	}
738		1382
739	=item $handle->rbuf	1383	=item $handle->rbuf
740		1384
741	Returns the read buffer (as a modifiable lvalue).	1385	Returns the read buffer (as a modifiable lvalue). You can also access the
		1386	read buffer directly as the C<< ->{rbuf} >> member, if you want (this is
		1387	much faster, and no less clean).
742		1388
743	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1389	The only operation allowed on the read buffer (apart from looking at it)
744	you want.	1390	is removing data from its beginning. Otherwise modifying or appending to
		1391	it is not allowed and will lead to hard-to-track-down bugs.
745		1392
746	NOTE: The read buffer should only be used or modified if the C<on_read>,	1393	NOTE: The read buffer should only be used or modified in the C<on_read>
747	C<push_read> or C<unshift_read> methods are used. The other read methods	1394	callback or when C<push_read> or C<unshift_read> are used with a single
748	automatically manage the read buffer.	1395	callback (i.e. untyped). Typed C<push_read> and C<unshift_read> methods
		1396	will manage the read buffer on their own.
749		1397
750	=cut	1398	=cut
751		1399
752	sub rbuf : lvalue {	1400	sub rbuf : lvalue {
753	$_[0]{rbuf}	1401	$_[0]{rbuf}
…		…
770		1418
771	If enough data was available, then the callback must remove all data it is	1419	If enough data was available, then the callback must remove all data it is
772	interested in (which can be none at all) and return a true value. After returning	1420	interested in (which can be none at all) and return a true value. After returning
773	true, it will be removed from the queue.	1421	true, it will be removed from the queue.
774		1422
		1423	These methods may invoke callbacks (and therefore the handle might be
		1424	destroyed after it returns).
		1425
775	=cut	1426	=cut
776		1427
777	our %RH;	1428	our %RH;
778		1429
779	sub register_read_type($$) {	1430	sub register_read_type($$) {
…		…
785	my $cb = pop;	1436	my $cb = pop;
786		1437
787	if (@_) {	1438	if (@_) {
788	my $type = shift;	1439	my $type = shift;
789		1440
		1441	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
790	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1442	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
791	->($self, $cb, @_);	1443	->($self, $cb, @_);
792	}	1444	}
793		1445
794	push @{ $self->{_queue} }, $cb;	1446	push @{ $self->{_queue} }, $cb;
795	$self->_drain_rbuf unless $self->{_in_drain};	1447	$self->_drain_rbuf;
796	}	1448	}
797		1449
798	sub unshift_read {	1450	sub unshift_read {
799	my $self = shift;	1451	my $self = shift;
800	my $cb = pop;	1452	my $cb = pop;
801		1453
802	if (@_) {	1454	if (@_) {
803	my $type = shift;	1455	my $type = shift;
804		1456
		1457	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
805	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1458	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::unshift_read")
806	->($self, $cb, @_);	1459	->($self, $cb, @_);
807	}	1460	}
808		1461
809
810	unshift @{ $self->{_queue} }, $cb;	1462	unshift @{ $self->{_queue} }, $cb;
811	$self->_drain_rbuf unless $self->{_in_drain};	1463	$self->_drain_rbuf;
812	}	1464	}
813		1465
814	=item $handle->push_read (type => @args, $cb)	1466	=item $handle->push_read (type => @args, $cb)
815		1467
816	=item $handle->unshift_read (type => @args, $cb)	1468	=item $handle->unshift_read (type => @args, $cb)
817		1469
818	Instead of providing a callback that parses the data itself you can chose	1470	Instead of providing a callback that parses the data itself you can chose
819	between a number of predefined parsing formats, for chunks of data, lines	1471	between a number of predefined parsing formats, for chunks of data, lines
820	etc.	1472	etc. You can also specify the (fully qualified) name of a package, in
		1473	which case AnyEvent tries to load the package and then expects to find the
		1474	C<anyevent_read_type> function inside (see "custom read types", below).
821		1475
822	Predefined types are (if you have ideas for additional types, feel free to	1476	Predefined types are (if you have ideas for additional types, feel free to
823	drop by and tell us):	1477	drop by and tell us):
824		1478
825	=over 4	1479	=over 4
…		…
831	data.	1485	data.
832		1486
833	Example: read 2 bytes.	1487	Example: read 2 bytes.
834		1488
835	$handle->push_read (chunk => 2, sub {	1489	$handle->push_read (chunk => 2, sub {
836	warn "yay ", unpack "H*", $_[1];	1490	say "yay " . unpack "H*", $_[1];
837	});	1491	});
838		1492
839	=cut	1493	=cut
840		1494
841	register_read_type chunk => sub {	1495	register_read_type chunk => sub {
…		…
846	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	1500	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
847	1	1501	1
848	}	1502	}
849	};	1503	};
850		1504
851	# compatibility with older API
852	sub push_read_chunk {
853	$_[0]->push_read (chunk => $_[1], $_[2]);
854	}
855
856	sub unshift_read_chunk {
857	$_[0]->unshift_read (chunk => $_[1], $_[2]);
858	}
859
860	=item line => [$eol, ]$cb->($handle, $line, $eol)	1505	=item line => [$eol, ]$cb->($handle, $line, $eol)
861		1506
862	The callback will be called only once a full line (including the end of	1507	The callback will be called only once a full line (including the end of
863	line marker, C<$eol>) has been read. This line (excluding the end of line	1508	line marker, C<$eol>) has been read. This line (excluding the end of line
864	marker) will be passed to the callback as second argument (C<$line>), and	1509	marker) will be passed to the callback as second argument (C<$line>), and
…		…
879	=cut	1524	=cut
880		1525
881	register_read_type line => sub {	1526	register_read_type line => sub {
882	my ($self, $cb, $eol) = @_;	1527	my ($self, $cb, $eol) = @_;
883		1528
884	$eol = qr|(\015?\012)| if @_ < 3;	1529	if (@_ < 3) {
		1530	# this is faster then the generic code below
		1531	sub {
		1532	(my $pos = index $_[0]{rbuf}, "\012") >= 0
		1533	or return;
		1534
		1535	(my $str = substr $_[0]{rbuf}, 0, $pos + 1, "") =~ s/(\015?\012)\Z// or die;
		1536	$cb->($_[0], $str, "$1");
		1537	1
		1538	}
		1539	} else {
885	$eol = quotemeta $eol unless ref $eol;	1540	$eol = quotemeta $eol unless ref $eol;
886	$eol = qr|^(.*?)($eol)|s;	1541	$eol = qr|^(.*?)($eol)|s;
887		1542
888	sub {	1543	sub {
889	$_[0]{rbuf} =~ s/$eol// or return;	1544	$_[0]{rbuf} =~ s/$eol// or return;
890		1545
891	$cb->($_[0], $1, $2);	1546	$cb->($_[0], "$1", "$2");
		1547	1
892	1	1548	}
893	}	1549	}
894	};	1550	};
895
896	# compatibility with older API
897	sub push_read_line {
898	my $self = shift;
899	$self->push_read (line => @_);
900	}
901
902	sub unshift_read_line {
903	my $self = shift;
904	$self->unshift_read (line => @_);
905	}
906		1551
907	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)	1552	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
908		1553
909	Makes a regex match against the regex object C<$accept> and returns	1554	Makes a regex match against the regex object C<$accept> and returns
910	everything up to and including the match.	1555	everything up to and including the match.
…		…
928	the receive buffer when neither C<$accept> nor C<$reject> match,	1573	the receive buffer when neither C<$accept> nor C<$reject> match,
929	and everything preceding and including the match will be accepted	1574	and everything preceding and including the match will be accepted
930	unconditionally. This is useful to skip large amounts of data that you	1575	unconditionally. This is useful to skip large amounts of data that you
931	know cannot be matched, so that the C<$accept> or C<$reject> regex do not	1576	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
932	have to start matching from the beginning. This is purely an optimisation	1577	have to start matching from the beginning. This is purely an optimisation
933	and is usually worth only when you expect more than a few kilobytes.	1578	and is usually worth it only when you expect more than a few kilobytes.
934		1579
935	Example: expect a http header, which ends at C<\015\012\015\012>. Since we	1580	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
936	expect the header to be very large (it isn't in practise, but...), we use	1581	expect the header to be very large (it isn't in practice, but...), we use
937	a skip regex to skip initial portions. The skip regex is tricky in that	1582	a skip regex to skip initial portions. The skip regex is tricky in that
938	it only accepts something not ending in either \015 or \012, as these are	1583	it only accepts something not ending in either \015 or \012, as these are
939	required for the accept regex.	1584	required for the accept regex.
940		1585
941	$handle->push_read (regex =>	1586	$handle->push_read (regex =>
…		…
954		1599
955	sub {	1600	sub {
956	# accept	1601	# accept
957	if ($$rbuf =~ $accept) {	1602	if ($$rbuf =~ $accept) {
958	$data .= substr $$rbuf, 0, $+[0], "";	1603	$data .= substr $$rbuf, 0, $+[0], "";
959	$cb->($self, $data);	1604	$cb->($_[0], $data);
960	return 1;	1605	return 1;
961	}	1606	}
962		1607
963	# reject	1608	# reject
964	if ($reject && $$rbuf =~ $reject) {	1609	if ($reject && $$rbuf =~ $reject) {
965	$self->_error (&Errno::EBADMSG);	1610	$_[0]->_error (Errno::EBADMSG);
966	}	1611	}
967		1612
968	# skip	1613	# skip
969	if ($skip && $$rbuf =~ $skip) {	1614	if ($skip && $$rbuf =~ $skip) {
970	$data .= substr $$rbuf, 0, $+[0], "";	1615	$data .= substr $$rbuf, 0, $+[0], "";
…		…
986	my ($self, $cb) = @_;	1631	my ($self, $cb) = @_;
987		1632
988	sub {	1633	sub {
989	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1634	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
990	if ($_[0]{rbuf} =~ /[^0-9]/) {	1635	if ($_[0]{rbuf} =~ /[^0-9]/) {
991	$self->_error (&Errno::EBADMSG);	1636	$_[0]->_error (Errno::EBADMSG);
992	}	1637	}
993	return;	1638	return;
994	}	1639	}
995		1640
996	my $len = $1;	1641	my $len = $1;
997		1642
998	$self->unshift_read (chunk => $len, sub {	1643	$_[0]->unshift_read (chunk => $len, sub {
999	my $string = $_[1];	1644	my $string = $_[1];
1000	$_[0]->unshift_read (chunk => 1, sub {	1645	$_[0]->unshift_read (chunk => 1, sub {
1001	if ($_[1] eq ",") {	1646	if ($_[1] eq ",") {
1002	$cb->($_[0], $string);	1647	$cb->($_[0], $string);
1003	} else {	1648	} else {
1004	$self->_error (&Errno::EBADMSG);	1649	$_[0]->_error (Errno::EBADMSG);
1005	}	1650	}
1006	});	1651	});
1007	});	1652	});
1008		1653
1009	1	1654	1
…		…
1015	An octet string prefixed with an encoded length. The encoding C<$format>	1660	An octet string prefixed with an encoded length. The encoding C<$format>
1016	uses the same format as a Perl C<pack> format, but must specify a single	1661	uses the same format as a Perl C<pack> format, but must specify a single
1017	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an	1662	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
1018	optional C<!>, C<< < >> or C<< > >> modifier).	1663	optional C<!>, C<< < >> or C<< > >> modifier).
1019		1664
1020	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.	1665	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1666	EPP uses a prefix of C<N> (4 octtes).
1021		1667
1022	Example: read a block of data prefixed by its length in BER-encoded	1668	Example: read a block of data prefixed by its length in BER-encoded
1023	format (very efficient).	1669	format (very efficient).
1024		1670
1025	$handle->push_read (packstring => "w", sub {	1671	$handle->push_read (packstring => "w", sub {
…		…
1031	register_read_type packstring => sub {	1677	register_read_type packstring => sub {
1032	my ($self, $cb, $format) = @_;	1678	my ($self, $cb, $format) = @_;
1033		1679
1034	sub {	1680	sub {
1035	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1681	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1036	defined (my $len = eval { unpack $format, $_[0]->{rbuf} })	1682	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
1037	or return;	1683	or return;
1038		1684
		1685	$format = length pack $format, $len;
		1686
		1687	# bypass unshift if we already have the remaining chunk
		1688	if ($format + $len <= length $_[0]{rbuf}) {
		1689	my $data = substr $_[0]{rbuf}, $format, $len;
		1690	substr $_[0]{rbuf}, 0, $format + $len, "";
		1691	$cb->($_[0], $data);
		1692	} else {
1039	# remove prefix	1693	# remove prefix
1040	substr $_[0]->{rbuf}, 0, (length pack $format, $len), "";	1694	substr $_[0]{rbuf}, 0, $format, "";
1041		1695
1042	# read rest	1696	# read remaining chunk
1043	$_[0]->unshift_read (chunk => $len, $cb);	1697	$_[0]->unshift_read (chunk => $len, $cb);
		1698	}
1044		1699
1045	1	1700	1
1046	}	1701	}
1047	};	1702	};
1048		1703
1049	=item json => $cb->($handle, $hash_or_arrayref)	1704	=item json => $cb->($handle, $hash_or_arrayref)
1050		1705
1051	Reads a JSON object or array, decodes it and passes it to the callback.	1706	Reads a JSON object or array, decodes it and passes it to the
		1707	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1052		1708
1053	If a C<json> object was passed to the constructor, then that will be used	1709	If a C<json> object was passed to the constructor, then that will be
1054	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1710	used for the final decode, otherwise it will create a L<JSON::XS> or
		1711	L<JSON::PP> coder object expecting UTF-8.
1055		1712
1056	This read type uses the incremental parser available with JSON version	1713	This read type uses the incremental parser available with JSON version
1057	2.09 (and JSON::XS version 2.2) and above. You have to provide a	1714	2.09 (and JSON::XS version 2.2) and above.
1058	dependency on your own: this module will load the JSON module, but
1059	AnyEvent does not depend on it itself.
1060		1715
1061	Since JSON texts are fully self-delimiting, the C<json> read and write	1716	Since JSON texts are fully self-delimiting, the C<json> read and write
1062	types are an ideal simple RPC protocol: just exchange JSON datagrams. See	1717	types are an ideal simple RPC protocol: just exchange JSON datagrams. See
1063	the C<json> write type description, above, for an actual example.	1718	the C<json> write type description, above, for an actual example.
1064		1719
1065	=cut	1720	=cut
1066		1721
1067	register_read_type json => sub {	1722	register_read_type json => sub {
1068	my ($self, $cb) = @_;	1723	my ($self, $cb) = @_;
1069		1724
1070	require JSON;	1725	my $json = $self->{json} ||= json_coder;
1071		1726
1072	my $data;	1727	my $data;
1073	my $rbuf = \$self->{rbuf};
1074
1075	my $json = $self->{json} ||= JSON->new->utf8;
1076		1728
1077	sub {	1729	sub {
1078	my $ref = $json->incr_parse ($self->{rbuf});	1730	my $ref = eval { $json->incr_parse ($_[0]{rbuf}) };
1079		1731
1080	if ($ref) {	1732	if ($ref) {
1081	$self->{rbuf} = $json->incr_text;	1733	$_[0]{rbuf} = $json->incr_text;
1082	$json->incr_text = "";	1734	$json->incr_text = "";
1083	$cb->($self, $ref);	1735	$cb->($_[0], $ref);
1084		1736
1085	1	1737	1
		1738	} elsif ($@) {
		1739	# error case
		1740	$json->incr_skip;
		1741
		1742	$_[0]{rbuf} = $json->incr_text;
		1743	$json->incr_text = "";
		1744
		1745	$_[0]->_error (Errno::EBADMSG);
		1746
		1747	()
1086	} else {	1748	} else {
1087	$self->{rbuf} = "";	1749	$_[0]{rbuf} = "";
		1750
		1751	()
		1752	}
		1753	}
		1754	};
		1755
		1756	=item cbor => $cb->($handle, $scalar)
		1757
		1758	Reads a CBOR value, decodes it and passes it to the callback. When a parse
		1759	error occurs, an C<EBADMSG> error will be raised.
		1760
		1761	If a L<CBOR::XS> object was passed to the constructor, then that will be
		1762	used for the final decode, otherwise it will create a CBOR coder without
		1763	enabling any options.
		1764
		1765	You have to provide a dependency to L<CBOR::XS> on your own: this module
		1766	will load the L<CBOR::XS> module, but AnyEvent does not depend on it
		1767	itself.
		1768
		1769	Since CBOR values are fully self-delimiting, the C<cbor> read and write
		1770	types are an ideal simple RPC protocol: just exchange CBOR datagrams. See
		1771	the C<cbor> write type description, above, for an actual example.
		1772
		1773	=cut
		1774
		1775	register_read_type cbor => sub {
		1776	my ($self, $cb) = @_;
		1777
		1778	my $cbor = $self->{cbor} ||= cbor_coder;
		1779
		1780	my $data;
		1781
		1782	sub {
		1783	my (@value) = eval { $cbor->incr_parse ($_[0]{rbuf}) };
		1784
		1785	if (@value) {
		1786	$cb->($_[0], @value);
		1787
		1788	1
		1789	} elsif ($@) {
		1790	# error case
		1791	$cbor->incr_reset;
		1792
		1793	$_[0]->_error (Errno::EBADMSG);
		1794
		1795	()
		1796	} else {
1088	()	1797	()
1089	}	1798	}
1090	}	1799	}
1091	};	1800	};
1092		1801
…		…
1101	=cut	1810	=cut
1102		1811
1103	register_read_type storable => sub {	1812	register_read_type storable => sub {
1104	my ($self, $cb) = @_;	1813	my ($self, $cb) = @_;
1105		1814
1106	require Storable;	1815	require Storable unless $Storable::VERSION;
1107		1816
1108	sub {	1817	sub {
1109	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1818	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1110	defined (my $len = eval { unpack "w", $_[0]->{rbuf} })	1819	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
1111	or return;	1820	or return;
1112		1821
		1822	my $format = length pack "w", $len;
		1823
		1824	# bypass unshift if we already have the remaining chunk
		1825	if ($format + $len <= length $_[0]{rbuf}) {
		1826	my $data = substr $_[0]{rbuf}, $format, $len;
		1827	substr $_[0]{rbuf}, 0, $format + $len, "";
		1828
		1829	eval { $cb->($_[0], Storable::thaw ($data)); 1 }
		1830	or return $_[0]->_error (Errno::EBADMSG);
		1831	} else {
1113	# remove prefix	1832	# remove prefix
1114	substr $_[0]->{rbuf}, 0, (length pack "w", $len), "";	1833	substr $_[0]{rbuf}, 0, $format, "";
1115		1834
1116	# read rest	1835	# read remaining chunk
1117	$_[0]->unshift_read (chunk => $len, sub {	1836	$_[0]->unshift_read (chunk => $len, sub {
1118	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1837	eval { $cb->($_[0], Storable::thaw ($_[1])); 1 }
1119	$cb->($_[0], $ref);
1120	} else {
1121	$self->_error (&Errno::EBADMSG);	1838	or $_[0]->_error (Errno::EBADMSG);
1122	}	1839	});
1123	});	1840	}
		1841
		1842	1
1124	}	1843	}
1125	};	1844	};
1126		1845
		1846	=item tls_detect => $cb->($handle, $detect, $major, $minor)
		1847
		1848	Checks the input stream for a valid SSL or TLS handshake TLSPaintext
		1849	record without consuming anything. Only SSL version 3 or higher
		1850	is handled, up to the fictituous protocol 4.x (but both SSL3+ and
		1851	SSL2-compatible framing is supported).
		1852
		1853	If it detects that the input data is likely TLS, it calls the callback
		1854	with a true value for C<$detect> and the (on-wire) TLS version as second
		1855	and third argument (C<$major> is C<3>, and C<$minor> is 0..3 for SSL
		1856	3.0, TLS 1.0, 1.1 and 1.2, respectively). If it detects the input to
		1857	be definitely not TLS, it calls the callback with a false value for
		1858	C<$detect>.
		1859
		1860	The callback could use this information to decide whether or not to start
		1861	TLS negotiation.
		1862
		1863	In all cases the data read so far is passed to the following read
		1864	handlers.
		1865
		1866	Usually you want to use the C<tls_autostart> read type instead.
		1867
		1868	If you want to design a protocol that works in the presence of TLS
		1869	dtection, make sure that any non-TLS data doesn't start with the octet 22
		1870	(ASCII SYN, 16 hex) or 128-255 (i.e. highest bit set). The checks this
		1871	read type does are a bit more strict, but might losen in the future to
		1872	accomodate protocol changes.
		1873
		1874	This read type does not rely on L<AnyEvent::TLS> (and thus, not on
		1875	L<Net::SSLeay>).
		1876
		1877	=item tls_autostart => $tls[, $tls_ctx]
		1878
		1879	Tries to detect a valid SSL or TLS handshake. If one is detected, it tries
		1880	to start tls by calling C<starttls> with the given arguments.
		1881
		1882	In practise, C<$tls> must be C<accept>, or a Net::SSLeay context that has
		1883	been configured to accept, as servers do not normally send a handshake on
		1884	their own and ths cannot be detected in this way.
		1885
		1886	See C<tls_detect> above for more details.
		1887
		1888	Example: give the client a chance to start TLS before accepting a text
		1889	line.
		1890
		1891	$hdl->push_read (tls_detect => "accept");
		1892	$hdl->push_read (line => sub {
		1893	print "received ", ($_[0]{tls} ? "encrypted" : "cleartext"), " <$_[1]>\n";
		1894	});
		1895
		1896	=cut
		1897
		1898	register_read_type tls_detect => sub {
		1899	my ($self, $cb) = @_;
		1900
		1901	sub {
		1902	# this regex matches a full or partial tls record
		1903	if (
		1904	# ssl3+: type(22=handshake) major(=3) minor(any) length_hi
		1905	$self->{rbuf} =~ /^(?:\z| \x16 (\z| [\x03\x04] (?:\z| . (?:\z| [\x00-\x40] ))))/xs
		1906	# ssl2 comapatible: len_hi len_lo type(1) major minor dummy(forlength)
		1907	or $self->{rbuf} =~ /^(?:\z| [\x80-\xff] (?:\z| . (?:\z| \x01 (\z| [\x03\x04] (?:\z| . (?:\z| . ))))))/xs
		1908	) {
		1909	return if 3 != length $1; # partial match, can't decide yet
		1910
		1911	# full match, valid TLS record
		1912	my ($major, $minor) = unpack "CC", $1;
		1913	$cb->($self, "accept", $major + $minor * 0.1);
		1914	} else {
		1915	# mismatch == guaranteed not TLS
		1916	$cb->($self, undef);
		1917	}
		1918
		1919	1
		1920	}
		1921	};
		1922
		1923	register_read_type tls_autostart => sub {
		1924	my ($self, @tls) = @_;
		1925
		1926	$RH{tls_detect}($self, sub {
		1927	return unless $_[1];
		1928	$_[0]->starttls (@tls);
		1929	})
		1930	};
		1931
1127	=back	1932	=back
1128		1933
1129	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1934	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1130		1935
1131	This function (not method) lets you add your own types to C<push_read>.	1936	Instead of one of the predefined types, you can also specify the name
		1937	of a package. AnyEvent will try to load the package and then expects to
		1938	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1939	progressively tries to load the parent package until it either finds the
		1940	function (good) or runs out of packages (bad).
1132		1941
1133	Whenever the given C<type> is used, C<push_read> will invoke the code	1942	Whenever this type is used, C<push_read> will invoke the function with the
1134	reference with the handle object, the callback and the remaining	1943	handle object, the original callback and the remaining arguments.
1135	arguments.
1136		1944
1137	The code reference is supposed to return a callback (usually a closure)	1945	The function is supposed to return a callback (usually a closure) that
1138	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1946	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1947	mentally treat the function as a "configurable read type to read callback"
		1948	converter.
1139		1949
1140	It should invoke the passed callback when it is done reading (remember to	1950	It should invoke the original callback when it is done reading (remember
1141	pass C<$handle> as first argument as all other callbacks do that).	1951	to pass C<$handle> as first argument as all other callbacks do that,
		1952	although there is no strict requirement on this).
1142		1953
1143	Note that this is a function, and all types registered this way will be
1144	global, so try to use unique names.
1145
1146	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1954	For examples, see the source of this module (F<perldoc -m
1147	search for C<register_read_type>)).	1955	AnyEvent::Handle>, search for C<register_read_type>)).
1148		1956
1149	=item $handle->stop_read	1957	=item $handle->stop_read
1150		1958
1151	=item $handle->start_read	1959	=item $handle->start_read
1152		1960
…		…
1158	Note that AnyEvent::Handle will automatically C<start_read> for you when	1966	Note that AnyEvent::Handle will automatically C<start_read> for you when
1159	you change the C<on_read> callback or push/unshift a read callback, and it	1967	you change the C<on_read> callback or push/unshift a read callback, and it
1160	will automatically C<stop_read> for you when neither C<on_read> is set nor	1968	will automatically C<stop_read> for you when neither C<on_read> is set nor
1161	there are any read requests in the queue.	1969	there are any read requests in the queue.
1162		1970
		1971	In older versions of this module (<= 5.3), these methods had no effect,
		1972	as TLS does not support half-duplex connections. In current versions they
		1973	work as expected, as this behaviour is required to avoid certain resource
		1974	attacks, where the program would be forced to read (and buffer) arbitrary
		1975	amounts of data before being able to send some data. The drawback is that
		1976	some readings of the the SSL/TLS specifications basically require this
		1977	attack to be working, as SSL/TLS implementations might stall sending data
		1978	during a rehandshake.
		1979
		1980	As a guideline, during the initial handshake, you should not stop reading,
		1981	and as a client, it might cause problems, depending on your application.
		1982
1163	=cut	1983	=cut
1164		1984
1165	sub stop_read {	1985	sub stop_read {
1166	my ($self) = @_;	1986	my ($self) = @_;
1167		1987
…		…
1169	}	1989	}
1170		1990
1171	sub start_read {	1991	sub start_read {
1172	my ($self) = @_;	1992	my ($self) = @_;
1173		1993
1174	unless ($self->{_rw} || $self->{_eof}) {	1994	unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
1175	Scalar::Util::weaken $self;	1995	Scalar::Util::weaken $self;
1176		1996
1177	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1997	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1178	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1998	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1179	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1999	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size}, length $$rbuf;
1180		2000
1181	if ($len > 0) {	2001	if ($len > 0) {
1182	$self->{_activity} = AnyEvent->now;	2002	$self->{_activity} = $self->{_ractivity} = AE::now;
1183		2003
1184	$self->{filter_r}	2004	if ($self->{tls}) {
1185	? $self->{filter_r}($self, $rbuf)	2005	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1186	: $self->{_in_drain} || $self->_drain_rbuf;	2006
		2007	&_dotls ($self);
		2008	} else {
		2009	$self->_drain_rbuf;
		2010	}
		2011
		2012	if ($len == $self->{read_size}) {
		2013	$self->{read_size} *= 2;
		2014	$self->{read_size} = $self->{max_read_size} || MAX_READ_SIZE
		2015	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		2016	}
1187		2017
1188	} elsif (defined $len) {	2018	} elsif (defined $len) {
1189	delete $self->{_rw};	2019	delete $self->{_rw};
1190	$self->{_eof} = 1;	2020	$self->{_eof} = 1;
1191	$self->_drain_rbuf unless $self->{_in_drain};	2021	$self->_drain_rbuf;
1192		2022
1193	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	2023	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1194	return $self->_error ($!, 1);	2024	return $self->_error ($!, 1);
1195	}	2025	}
1196	});	2026	};
1197	}	2027	}
1198	}	2028	}
1199		2029
		2030	our $ERROR_SYSCALL;
		2031	our $ERROR_WANT_READ;
		2032
		2033	sub _tls_error {
		2034	my ($self, $err) = @_;
		2035
		2036	return $self->_error ($!, 1)
		2037	if $err == Net::SSLeay::ERROR_SYSCALL ();
		2038
		2039	my $err = Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		2040
		2041	# reduce error string to look less scary
		2042	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		2043
		2044	if ($self->{_on_starttls}) {
		2045	(delete $self->{_on_starttls})->($self, undef, $err);
		2046	&_freetls;
		2047	} else {
		2048	&_freetls;
		2049	$self->_error (Errno::EPROTO, 1, $err);
		2050	}
		2051	}
		2052
		2053	# poll the write BIO and send the data if applicable
		2054	# also decode read data if possible
		2055	# this is basiclaly our TLS state machine
		2056	# more efficient implementations are possible with openssl,
		2057	# but not with the buggy and incomplete Net::SSLeay.
1200	sub _dotls {	2058	sub _dotls {
1201	my ($self) = @_;	2059	my ($self) = @_;
1202		2060
1203	my $buf;	2061	my $tmp;
1204		2062
1205	if (length $self->{_tls_wbuf}) {	2063	while (length $self->{_tls_wbuf}) {
1206	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	2064	if (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) <= 0) {
1207	substr $self->{_tls_wbuf}, 0, $len, "";	2065	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		2066
		2067	return $self->_tls_error ($tmp)
		2068	if $tmp != $ERROR_WANT_READ
		2069	&& ($tmp != $ERROR_SYSCALL || $!);
		2070
		2071	last;
1208	}	2072	}
1209	}
1210		2073
		2074	substr $self->{_tls_wbuf}, 0, $tmp, "";
		2075	}
		2076
		2077	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		2078	unless (length $tmp) {
		2079	$self->{_on_starttls}
		2080	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		2081	&_freetls;
		2082
		2083	if ($self->{on_stoptls}) {
		2084	$self->{on_stoptls}($self);
		2085	return;
		2086	} else {
		2087	# let's treat SSL-eof as we treat normal EOF
		2088	delete $self->{_rw};
		2089	$self->{_eof} = 1;
		2090	}
		2091	}
		2092
		2093	$self->{_tls_rbuf} .= $tmp;
		2094	$self->_drain_rbuf;
		2095	$self->{tls} or return; # tls session might have gone away in callback
		2096	}
		2097
		2098	$tmp = Net::SSLeay::get_error ($self->{tls}, -1); # -1 is not neccessarily correct, but Net::SSLeay doesn't tell us
		2099	return $self->_tls_error ($tmp)
		2100	if $tmp != $ERROR_WANT_READ
		2101	&& ($tmp != $ERROR_SYSCALL || $!);
		2102
1211	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	2103	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1212	$self->{wbuf} .= $buf;	2104	$self->{wbuf} .= $tmp;
1213	$self->_drain_wbuf;	2105	$self->_drain_wbuf;
		2106	$self->{tls} or return; # tls session might have gone away in callback
1214	}	2107	}
1215		2108
1216	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	2109	$self->{_on_starttls}
1217	if (length $buf) {	2110	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1218	$self->{rbuf} .= $buf;	2111	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1219	$self->_drain_rbuf unless $self->{_in_drain};
1220	} else {
1221	# let's treat SSL-eof as we treat normal EOF
1222	$self->{_eof} = 1;
1223	$self->_shutdown;
1224	return;
1225	}
1226	}
1227
1228	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
1229
1230	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1231	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1232	return $self->_error ($!, 1);
1233	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
1234	return $self->_error (&Errno::EIO, 1);
1235	}
1236
1237	# all others are fine for our purposes
1238	}
1239	}	2112	}
1240		2113
1241	=item $handle->starttls ($tls[, $tls_ctx])	2114	=item $handle->starttls ($tls[, $tls_ctx])
1242		2115
1243	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	2116	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1244	object is created, you can also do that at a later time by calling	2117	object is created, you can also do that at a later time by calling
1245	C<starttls>.	2118	C<starttls>. See the C<tls> constructor argument for general info.
		2119
		2120	Starting TLS is currently an asynchronous operation - when you push some
		2121	write data and then call C<< ->starttls >> then TLS negotiation will start
		2122	immediately, after which the queued write data is then sent. This might
		2123	change in future versions, so best make sure you have no outstanding write
		2124	data when calling this method.
1246		2125
1247	The first argument is the same as the C<tls> constructor argument (either	2126	The first argument is the same as the C<tls> constructor argument (either
1248	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	2127	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1249		2128
1250	The second argument is the optional C<Net::SSLeay::CTX> object that is	2129	The second argument is the optional C<AnyEvent::TLS> object that is used
1251	used when AnyEvent::Handle has to create its own TLS connection object.	2130	when AnyEvent::Handle has to create its own TLS connection object, or
		2131	a hash reference with C<< key => value >> pairs that will be used to
		2132	construct a new context.
1252		2133
1253	The TLS connection object will end up in C<< $handle->{tls} >> after this	2134	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1254	call and can be used or changed to your liking. Note that the handshake	2135	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1255	might have already started when this function returns.	2136	changed to your liking. Note that the handshake might have already started
		2137	when this function returns.
1256		2138
		2139	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		2140	handshakes on the same stream. It is best to not attempt to use the
		2141	stream after stopping TLS.
		2142
		2143	This method may invoke callbacks (and therefore the handle might be
		2144	destroyed after it returns).
		2145
1257	=cut	2146	=cut
		2147
		2148	our %TLS_CACHE; #TODO not yet documented, should we?
1258		2149
1259	sub starttls {	2150	sub starttls {
1260	my ($self, $ssl, $ctx) = @_;	2151	my ($self, $tls, $ctx) = @_;
1261		2152
1262	$self->stoptls;	2153	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		2154	if $self->{tls};
1263		2155
1264	if ($ssl eq "accept") {	2156	unless (defined $AnyEvent::TLS::VERSION) {
1265	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	2157	eval {
1266	Net::SSLeay::set_accept_state ($ssl);	2158	require Net::SSLeay;
1267	} elsif ($ssl eq "connect") {	2159	require AnyEvent::TLS;
1268	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	2160	1
1269	Net::SSLeay::set_connect_state ($ssl);	2161	} or return $self->_error (Errno::EPROTO, 1, "TLS support not available on this system");
		2162	}
		2163
		2164	$self->{tls} = $tls;
		2165	$self->{tls_ctx} = $ctx if @_ > 2;
		2166
		2167	return unless $self->{fh};
		2168
		2169	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		2170	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		2171
		2172	$tls = delete $self->{tls};
		2173	$ctx = $self->{tls_ctx};
		2174
		2175	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		2176
		2177	if ("HASH" eq ref $ctx) {
		2178	if ($ctx->{cache}) {
		2179	my $key = $ctx+0;
		2180	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		2181	} else {
		2182	$ctx = new AnyEvent::TLS %$ctx;
		2183	}
		2184	}
1270	}	2185
1271		2186	$self->{tls_ctx} = $ctx || TLS_CTX ();
1272	$self->{tls} = $ssl;	2187	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1273		2188
1274	# basically, this is deep magic (because SSL_read should have the same issues)	2189	# basically, this is deep magic (because SSL_read should have the same issues)
1275	# but the openssl maintainers basically said: "trust us, it just works".	2190	# but the openssl maintainers basically said: "trust us, it just works".
1276	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	2191	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1277	# and mismaintained ssleay-module doesn't even offer them).	2192	# and mismaintained ssleay-module doesn't even offer them).
1278	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	2193	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		2194	#
		2195	# in short: this is a mess.
		2196	#
		2197	# note that we do not try to keep the length constant between writes as we are required to do.
		2198	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		2199	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		2200	# have identity issues in that area.
1279	Net::SSLeay::CTX_set_mode ($self->{tls},	2201	# Net::SSLeay::CTX_set_mode ($ssl,
1280	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	2202	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1281	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	2203	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		2204	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1282		2205
1283	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	2206	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1284	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	2207	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1285		2208
		2209	Net::SSLeay::BIO_write ($self->{_rbio}, $self->{rbuf});
		2210	$self->{rbuf} = "";
		2211
1286	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	2212	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1287		2213
1288	$self->{filter_w} = sub {	2214	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1289	$_[0]{_tls_wbuf} .= ${$_[1]};	2215	if $self->{on_starttls};
1290	&_dotls;	2216
1291	};	2217	&_dotls; # need to trigger the initial handshake
1292	$self->{filter_r} = sub {	2218	$self->start_read; # make sure we actually do read
1293	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1294	&_dotls;
1295	};
1296	}	2219	}
1297		2220
1298	=item $handle->stoptls	2221	=item $handle->stoptls
1299		2222
1300	Destroys the SSL connection, if any. Partial read or write data will be	2223	Shuts down the SSL connection - this makes a proper EOF handshake by
1301	lost.	2224	sending a close notify to the other side, but since OpenSSL doesn't
		2225	support non-blocking shut downs, it is not guaranteed that you can re-use
		2226	the stream afterwards.
		2227
		2228	This method may invoke callbacks (and therefore the handle might be
		2229	destroyed after it returns).
1302		2230
1303	=cut	2231	=cut
1304		2232
1305	sub stoptls {	2233	sub stoptls {
1306	my ($self) = @_;	2234	my ($self) = @_;
1307		2235
1308	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	2236	if ($self->{tls} && $self->{fh}) {
		2237	Net::SSLeay::shutdown ($self->{tls});
1309		2238
1310	delete $self->{_rbio};	2239	&_dotls;
1311	delete $self->{_wbio};	2240
1312	delete $self->{_tls_wbuf};	2241	# # we don't give a shit. no, we do, but we can't. no...#d#
1313	delete $self->{filter_r};	2242	# # we, we... have to use openssl :/#d#
1314	delete $self->{filter_w};	2243	# &_freetls;#d#
		2244	}
1315	}	2245	}
		2246
		2247	sub _freetls {
		2248	my ($self) = @_;
		2249
		2250	return unless $self->{tls};
		2251
		2252	$self->{tls_ctx}->_put_session (delete $self->{tls})
		2253	if $self->{tls} > 0;
		2254
		2255	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
		2256	}
		2257
		2258	=item $handle->resettls
		2259
		2260	This rarely-used method simply resets and TLS state on the handle, usually
		2261	causing data loss.
		2262
		2263	One case where it may be useful is when you want to skip over the data in
		2264	the stream but you are not interested in interpreting it, so data loss is
		2265	no concern.
		2266
		2267	=cut
		2268
		2269	*resettls = \&_freetls;
1316		2270
1317	sub DESTROY {	2271	sub DESTROY {
1318	my $self = shift;	2272	my ($self) = @_;
1319		2273
1320	$self->stoptls;	2274	&_freetls;
1321		2275
1322	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	2276	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1323		2277
1324	if ($linger && length $self->{wbuf}) {	2278	if ($linger && length $self->{wbuf} && $self->{fh}) {
1325	my $fh = delete $self->{fh};	2279	my $fh = delete $self->{fh};
1326	my $wbuf = delete $self->{wbuf};	2280	my $wbuf = delete $self->{wbuf};
1327		2281
1328	my @linger;	2282	my @linger;
1329		2283
1330	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	2284	push @linger, AE::io $fh, 1, sub {
1331	my $len = syswrite $fh, $wbuf, length $wbuf;	2285	my $len = syswrite $fh, $wbuf, length $wbuf;
1332		2286
1333	if ($len > 0) {	2287	if ($len > 0) {
1334	substr $wbuf, 0, $len, "";	2288	substr $wbuf, 0, $len, "";
1335	} else {	2289	} elsif (defined $len || ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK)) {
1336	@linger = (); # end	2290	@linger = (); # end
1337	}	2291	}
		2292	};
		2293	push @linger, AE::timer $linger, 0, sub {
		2294	@linger = ();
		2295	};
		2296	}
		2297	}
		2298
		2299	=item $handle->destroy
		2300
		2301	Shuts down the handle object as much as possible - this call ensures that
		2302	no further callbacks will be invoked and as many resources as possible
		2303	will be freed. Any method you will call on the handle object after
		2304	destroying it in this way will be silently ignored (and it will return the
		2305	empty list).
		2306
		2307	Normally, you can just "forget" any references to an AnyEvent::Handle
		2308	object and it will simply shut down. This works in fatal error and EOF
		2309	callbacks, as well as code outside. It does I<NOT> work in a read or write
		2310	callback, so when you want to destroy the AnyEvent::Handle object from
		2311	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		2312	that case.
		2313
		2314	Destroying the handle object in this way has the advantage that callbacks
		2315	will be removed as well, so if those are the only reference holders (as
		2316	is common), then one doesn't need to do anything special to break any
		2317	reference cycles.
		2318
		2319	The handle might still linger in the background and write out remaining
		2320	data, as specified by the C<linger> option, however.
		2321
		2322	=cut
		2323
		2324	sub destroy {
		2325	my ($self) = @_;
		2326
		2327	$self->DESTROY;
		2328	%$self = ();
		2329	bless $self, "AnyEvent::Handle::destroyed";
		2330	}
		2331
		2332	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2333	#nop
		2334	}
		2335
		2336	=item $handle->destroyed
		2337
		2338	Returns false as long as the handle hasn't been destroyed by a call to C<<
		2339	->destroy >>, true otherwise.
		2340
		2341	Can be useful to decide whether the handle is still valid after some
		2342	callback possibly destroyed the handle. For example, C<< ->push_write >>,
		2343	C<< ->starttls >> and other methods can call user callbacks, which in turn
		2344	can destroy the handle, so work can be avoided by checking sometimes:
		2345
		2346	$hdl->starttls ("accept");
		2347	return if $hdl->destroyed;
		2348	$hdl->push_write (...
		2349
		2350	Note that the call to C<push_write> will silently be ignored if the handle
		2351	has been destroyed, so often you can just ignore the possibility of the
		2352	handle being destroyed.
		2353
		2354	=cut
		2355
		2356	sub destroyed { 0 }
		2357	sub AnyEvent::Handle::destroyed::destroyed { 1 }
		2358
		2359	=item AnyEvent::Handle::TLS_CTX
		2360
		2361	This function creates and returns the AnyEvent::TLS object used by default
		2362	for TLS mode.
		2363
		2364	The context is created by calling L<AnyEvent::TLS> without any arguments.
		2365
		2366	=cut
		2367
		2368	our $TLS_CTX;
		2369
		2370	sub TLS_CTX() {
		2371	$TLS_CTX ||= do {
		2372	require AnyEvent::TLS;
		2373
		2374	new AnyEvent::TLS
		2375	}
		2376	}
		2377
		2378	=back
		2379
		2380
		2381	=head1 NONFREQUENTLY ASKED QUESTIONS
		2382
		2383	=over 4
		2384
		2385	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		2386	still get further invocations!
		2387
		2388	That's because AnyEvent::Handle keeps a reference to itself when handling
		2389	read or write callbacks.
		2390
		2391	It is only safe to "forget" the reference inside EOF or error callbacks,
		2392	from within all other callbacks, you need to explicitly call the C<<
		2393	->destroy >> method.
		2394
		2395	=item Why is my C<on_eof> callback never called?
		2396
		2397	Probably because your C<on_error> callback is being called instead: When
		2398	you have outstanding requests in your read queue, then an EOF is
		2399	considered an error as you clearly expected some data.
		2400
		2401	To avoid this, make sure you have an empty read queue whenever your handle
		2402	is supposed to be "idle" (i.e. connection closes are O.K.). You can set
		2403	an C<on_read> handler that simply pushes the first read requests in the
		2404	queue.
		2405
		2406	See also the next question, which explains this in a bit more detail.
		2407
		2408	=item How can I serve requests in a loop?
		2409
		2410	Most protocols consist of some setup phase (authentication for example)
		2411	followed by a request handling phase, where the server waits for requests
		2412	and handles them, in a loop.
		2413
		2414	There are two important variants: The first (traditional, better) variant
		2415	handles requests until the server gets some QUIT command, causing it to
		2416	close the connection first (highly desirable for a busy TCP server). A
		2417	client dropping the connection is an error, which means this variant can
		2418	detect an unexpected detection close.
		2419
		2420	To handle this case, always make sure you have a non-empty read queue, by
		2421	pushing the "read request start" handler on it:
		2422
		2423	# we assume a request starts with a single line
		2424	my @start_request; @start_request = (line => sub {
		2425	my ($hdl, $line) = @_;
		2426
		2427	... handle request
		2428
		2429	# push next request read, possibly from a nested callback
		2430	$hdl->push_read (@start_request);
		2431	});
		2432
		2433	# auth done, now go into request handling loop
		2434	# now push the first @start_request
		2435	$hdl->push_read (@start_request);
		2436
		2437	By always having an outstanding C<push_read>, the handle always expects
		2438	some data and raises the C<EPIPE> error when the connction is dropped
		2439	unexpectedly.
		2440
		2441	The second variant is a protocol where the client can drop the connection
		2442	at any time. For TCP, this means that the server machine may run out of
		2443	sockets easier, and in general, it means you cannot distinguish a protocl
		2444	failure/client crash from a normal connection close. Nevertheless, these
		2445	kinds of protocols are common (and sometimes even the best solution to the
		2446	problem).
		2447
		2448	Having an outstanding read request at all times is possible if you ignore
		2449	C<EPIPE> errors, but this doesn't help with when the client drops the
		2450	connection during a request, which would still be an error.
		2451
		2452	A better solution is to push the initial request read in an C<on_read>
		2453	callback. This avoids an error, as when the server doesn't expect data
		2454	(i.e. is idly waiting for the next request, an EOF will not raise an
		2455	error, but simply result in an C<on_eof> callback. It is also a bit slower
		2456	and simpler:
		2457
		2458	# auth done, now go into request handling loop
		2459	$hdl->on_read (sub {
		2460	my ($hdl) = @_;
		2461
		2462	# called each time we receive data but the read queue is empty
		2463	# simply start read the request
		2464
		2465	$hdl->push_read (line => sub {
		2466	my ($hdl, $line) = @_;
		2467
		2468	... handle request
		2469
		2470	# do nothing special when the request has been handled, just
		2471	# let the request queue go empty.
1338	});	2472	});
1339	push @linger, AnyEvent->timer (after => $linger, cb => sub {
1340	@linger = ();
1341	});	2473	});
		2474
		2475	=item I get different callback invocations in TLS mode/Why can't I pause
		2476	reading?
		2477
		2478	Unlike, say, TCP, TLS connections do not consist of two independent
		2479	communication channels, one for each direction. Or put differently, the
		2480	read and write directions are not independent of each other: you cannot
		2481	write data unless you are also prepared to read, and vice versa.
		2482
		2483	This means that, in TLS mode, you might get C<on_error> or C<on_eof>
		2484	callback invocations when you are not expecting any read data - the reason
		2485	is that AnyEvent::Handle always reads in TLS mode.
		2486
		2487	During the connection, you have to make sure that you always have a
		2488	non-empty read-queue, or an C<on_read> watcher. At the end of the
		2489	connection (or when you no longer want to use it) you can call the
		2490	C<destroy> method.
		2491
		2492	=item How do I read data until the other side closes the connection?
		2493
		2494	If you just want to read your data into a perl scalar, the easiest way
		2495	to achieve this is by setting an C<on_read> callback that does nothing,
		2496	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		2497	will be in C<$_[0]{rbuf}>:
		2498
		2499	$handle->on_read (sub { });
		2500	$handle->on_eof (undef);
		2501	$handle->on_error (sub {
		2502	my $data = delete $_[0]{rbuf};
		2503	});
		2504
		2505	Note that this example removes the C<rbuf> member from the handle object,
		2506	which is not normally allowed by the API. It is expressly permitted in
		2507	this case only, as the handle object needs to be destroyed afterwards.
		2508
		2509	The reason to use C<on_error> is that TCP connections, due to latencies
		2510	and packets loss, might get closed quite violently with an error, when in
		2511	fact all data has been received.
		2512
		2513	It is usually better to use acknowledgements when transferring data,
		2514	to make sure the other side hasn't just died and you got the data
		2515	intact. This is also one reason why so many internet protocols have an
		2516	explicit QUIT command.
		2517
		2518	=item I don't want to destroy the handle too early - how do I wait until
		2519	all data has been written?
		2520
		2521	After writing your last bits of data, set the C<on_drain> callback
		2522	and destroy the handle in there - with the default setting of
		2523	C<low_water_mark> this will be called precisely when all data has been
		2524	written to the socket:
		2525
		2526	$handle->push_write (...);
		2527	$handle->on_drain (sub {
		2528	AE::log debug => "All data submitted to the kernel.";
		2529	undef $handle;
		2530	});
		2531
		2532	If you just want to queue some data and then signal EOF to the other side,
		2533	consider using C<< ->push_shutdown >> instead.
		2534
		2535	=item I want to contact a TLS/SSL server, I don't care about security.
		2536
		2537	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2538	connect to it and then create the AnyEvent::Handle with the C<tls>
		2539	parameter:
		2540
		2541	tcp_connect $host, $port, sub {
		2542	my ($fh) = @_;
		2543
		2544	my $handle = new AnyEvent::Handle
		2545	fh => $fh,
		2546	tls => "connect",
		2547	on_error => sub { ... };
		2548
		2549	$handle->push_write (...);
1342	}	2550	};
1343	}
1344		2551
1345	=item AnyEvent::Handle::TLS_CTX	2552	=item I want to contact a TLS/SSL server, I do care about security.
1346		2553
1347	This function creates and returns the Net::SSLeay::CTX object used by	2554	Then you should additionally enable certificate verification, including
1348	default for TLS mode.	2555	peername verification, if the protocol you use supports it (see
		2556	L<AnyEvent::TLS>, C<verify_peername>).
1349		2557
1350	The context is created like this:	2558	E.g. for HTTPS:
1351		2559
1352	Net::SSLeay::load_error_strings;	2560	tcp_connect $host, $port, sub {
1353	Net::SSLeay::SSLeay_add_ssl_algorithms;	2561	my ($fh) = @_;
1354	Net::SSLeay::randomize;
1355		2562
1356	my $CTX = Net::SSLeay::CTX_new;	2563	my $handle = new AnyEvent::Handle
		2564	fh => $fh,
		2565	peername => $host,
		2566	tls => "connect",
		2567	tls_ctx => { verify => 1, verify_peername => "https" },
		2568	...
1357		2569
1358	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL	2570	Note that you must specify the hostname you connected to (or whatever
		2571	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2572	peername verification will be done.
1359		2573
1360	=cut	2574	The above will use the system-dependent default set of trusted CA
		2575	certificates. If you want to check against a specific CA, add the
		2576	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
1361		2577
1362	our $TLS_CTX;	2578	tls_ctx => {
		2579	verify => 1,
		2580	verify_peername => "https",
		2581	ca_file => "my-ca-cert.pem",
		2582	},
1363		2583
1364	sub TLS_CTX() {	2584	=item I want to create a TLS/SSL server, how do I do that?
1365	$TLS_CTX || do {
1366	require Net::SSLeay;
1367		2585
1368	Net::SSLeay::load_error_strings ();	2586	Well, you first need to get a server certificate and key. You have
1369	Net::SSLeay::SSLeay_add_ssl_algorithms ();	2587	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
1370	Net::SSLeay::randomize ();	2588	self-signed certificate (cheap. check the search engine of your choice,
		2589	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2590	nice program for that purpose).
1371		2591
1372	$TLS_CTX = Net::SSLeay::CTX_new ();	2592	Then create a file with your private key (in PEM format, see
		2593	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2594	file should then look like this:
1373		2595
1374	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());	2596	-----BEGIN RSA PRIVATE KEY-----
		2597	...header data
		2598	... lots of base64'y-stuff
		2599	-----END RSA PRIVATE KEY-----
1375		2600
1376	$TLS_CTX	2601	-----BEGIN CERTIFICATE-----
1377	}	2602	... lots of base64'y-stuff
1378	}	2603	-----END CERTIFICATE-----
		2604
		2605	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2606	specify this file as C<cert_file>:
		2607
		2608	tcp_server undef, $port, sub {
		2609	my ($fh) = @_;
		2610
		2611	my $handle = new AnyEvent::Handle
		2612	fh => $fh,
		2613	tls => "accept",
		2614	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2615	...
		2616
		2617	When you have intermediate CA certificates that your clients might not
		2618	know about, just append them to the C<cert_file>.
1379		2619
1380	=back	2620	=back
1381		2621
1382	=head1 SUBCLASSING AnyEvent::Handle	2622	=head1 SUBCLASSING AnyEvent::Handle
1383		2623
…		…
1389	=over 4	2629	=over 4
1390		2630
1391	=item * all constructor arguments become object members.	2631	=item * all constructor arguments become object members.
1392		2632
1393	At least initially, when you pass a C<tls>-argument to the constructor it	2633	At least initially, when you pass a C<tls>-argument to the constructor it
1394	will end up in C<< $handle->{tls} >>. Those members might be changes or	2634	will end up in C<< $handle->{tls} >>. Those members might be changed or
1395	mutated later on (for example C<tls> will hold the TLS connection object).	2635	mutated later on (for example C<tls> will hold the TLS connection object).
1396		2636
1397	=item * other object member names are prefixed with an C<_>.	2637	=item * other object member names are prefixed with an C<_>.
1398		2638
1399	All object members not explicitly documented (internal use) are prefixed	2639	All object members not explicitly documented (internal use) are prefixed
…		…
1402		2642
1403	=item * all members not documented here and not prefixed with an underscore	2643	=item * all members not documented here and not prefixed with an underscore
1404	are free to use in subclasses.	2644	are free to use in subclasses.
1405		2645
1406	Of course, new versions of AnyEvent::Handle may introduce more "public"	2646	Of course, new versions of AnyEvent::Handle may introduce more "public"
1407	member variables, but thats just life, at least it is documented.	2647	member variables, but that's just life. At least it is documented.
1408		2648
1409	=back	2649	=back
1410		2650
1411	=head1 AUTHOR	2651	=head1 AUTHOR
1412		2652
1413	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.	2653	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.
1414		2654
1415	=cut	2655	=cut
1416		2656
1417	1; # End of AnyEvent::Handle	2657	1
		2658

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines