ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.101 by root, Thu Oct 23 19:03:30 2008 UTC vs.
Revision 1.185 by root, Thu Sep 3 19:48:27 2009 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.3;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	warn "got error $msg\n";
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	);
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	filehandles.
52	on sockets see L<AnyEvent::Util>.
53		37
54	The L<AnyEvent::Intro> tutorial contains some well-documented	38	The L<AnyEvent::Intro> tutorial contains some well-documented
55	AnyEvent::Handle examples.	39	AnyEvent::Handle examples.
56		40
57	In the following, when the documentation refers to of "bytes" then this	41	In the following, when the documentation refers to of "bytes" then this
58	means characters. As sysread and syswrite are used for all I/O, their	42	means characters. As sysread and syswrite are used for all I/O, their
59	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
60		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
		47
61	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
62	argument.	49	argument.
63		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
		79
64	=head1 METHODS	80	=head1 METHODS
65		81
66	=over 4	82	=over 4
67		83
68	=item B<new (%args)>	84	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
69		85
70	The constructor supports these arguments (all as key => value pairs).	86	The constructor supports these arguments (all as C<< key => value >> pairs).
71		87
72	=over 4	88	=over 4
73		89
74	=item fh => $filehandle [MANDATORY]	90	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
75		91
76	The filehandle this L<AnyEvent::Handle> object will operate on.	92	The filehandle this L<AnyEvent::Handle> object will operate on.
77
78	NOTE: The filehandle will be set to non-blocking mode (using	93	NOTE: The filehandle will be set to non-blocking mode (using
79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in	94	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
80	that mode.	95	that mode.
81		96
		97	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		98
		99	Try to connect to the specified host and service (port), using
		100	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		101	default C<peername>.
		102
		103	You have to specify either this parameter, or C<fh>, above.
		104
		105	It is possible to push requests on the read and write queues, and modify
		106	properties of the stream, even while AnyEvent::Handle is connecting.
		107
		108	When this parameter is specified, then the C<on_prepare>,
		109	C<on_connect_error> and C<on_connect> callbacks will be called under the
		110	appropriate circumstances:
		111
		112	=over 4
		113
		114	=item on_prepare => $cb->($handle)
		115
		116	This (rarely used) callback is called before a new connection is
		117	attempted, but after the file handle has been created. It could be used to
		118	prepare the file handle with parameters required for the actual connect
		119	(as opposed to settings that can be changed when the connection is already
		120	established).
		121
		122	The return value of this callback should be the connect timeout value in
		123	seconds (or C<0>, or C<undef>, or the empty list, to indicate the default
		124	timeout is to be used).
		125
		126	=item on_connect => $cb->($handle, $host, $port, $retry->())
		127
		128	This callback is called when a connection has been successfully established.
		129
		130	The actual numeric host and port (the socket peername) are passed as
		131	parameters, together with a retry callback.
		132
		133	When, for some reason, the handle is not acceptable, then calling
		134	C<$retry> will continue with the next conenction target (in case of
		135	multi-homed hosts or SRV records there can be multiple connection
		136	endpoints). When it is called then the read and write queues, eof status,
		137	tls status and similar properties of the handle are being reset.
		138
		139	In most cases, ignoring the C<$retry> parameter is the way to go.
		140
		141	=item on_connect_error => $cb->($handle, $message)
		142
		143	This callback is called when the conenction could not be
		144	established. C<$!> will contain the relevant error code, and C<$message> a
		145	message describing it (usually the same as C<"$!">).
		146
		147	If this callback isn't specified, then C<on_error> will be called with a
		148	fatal error instead.
		149
		150	=back
		151
		152	=item on_error => $cb->($handle, $fatal, $message)
		153
		154	This is the error callback, which is called when, well, some error
		155	occured, such as not being able to resolve the hostname, failure to
		156	connect or a read error.
		157
		158	Some errors are fatal (which is indicated by C<$fatal> being true). On
		159	fatal errors the handle object will be destroyed (by a call to C<< ->
		160	destroy >>) after invoking the error callback (which means you are free to
		161	examine the handle object). Examples of fatal errors are an EOF condition
		162	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		163	cases where the other side can close the connection at their will it is
		164	often easiest to not report C<EPIPE> errors in this callback.
		165
		166	AnyEvent::Handle tries to find an appropriate error code for you to check
		167	against, but in some cases (TLS errors), this does not work well. It is
		168	recommended to always output the C<$message> argument in human-readable
		169	error messages (it's usually the same as C<"$!">).
		170
		171	Non-fatal errors can be retried by simply returning, but it is recommended
		172	to simply ignore this parameter and instead abondon the handle object
		173	when this callback is invoked. Examples of non-fatal errors are timeouts
		174	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
		175
		176	On callback entrance, the value of C<$!> contains the operating system
		177	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		178	C<EPROTO>).
		179
		180	While not mandatory, it is I<highly> recommended to set this callback, as
		181	you will not be notified of errors otherwise. The default simply calls
		182	C<croak>.
		183
		184	=item on_read => $cb->($handle)
		185
		186	This sets the default read callback, which is called when data arrives
		187	and no read request is in the queue (unlike read queue callbacks, this
		188	callback will only be called when at least one octet of data is in the
		189	read buffer).
		190
		191	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
		192	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		193	must not enlarge or modify the read buffer, you can only remove data at
		194	the beginning from it.
		195
		196	When an EOF condition is detected then AnyEvent::Handle will first try to
		197	feed all the remaining data to the queued callbacks and C<on_read> before
		198	calling the C<on_eof> callback. If no progress can be made, then a fatal
		199	error will be raised (with C<$!> set to C<EPIPE>).
		200
		201	Note that, unlike requests in the read queue, an C<on_read> callback
		202	doesn't mean you I<require> some data: if there is an EOF and there
		203	are outstanding read requests then an error will be flagged. With an
		204	C<on_read> callback, the C<on_eof> callback will be invoked.
		205
82	=item on_eof => $cb->($handle)	206	=item on_eof => $cb->($handle)
83		207
84	Set the callback to be called when an end-of-file condition is detected,	208	Set the callback to be called when an end-of-file condition is detected,
85	i.e. in the case of a socket, when the other side has closed the	209	i.e. in the case of a socket, when the other side has closed the
86	connection cleanly.	210	connection cleanly, and there are no outstanding read requests in the
		211	queue (if there are read requests, then an EOF counts as an unexpected
		212	connection close and will be flagged as an error).
87		213
88	For sockets, this just means that the other side has stopped sending data,	214	For sockets, this just means that the other side has stopped sending data,
89	you can still try to write data, and, in fact, one can return from the EOF	215	you can still try to write data, and, in fact, one can return from the EOF
90	callback and continue writing data, as only the read part has been shut	216	callback and continue writing data, as only the read part has been shut
91	down.	217	down.
92		218
93	While not mandatory, it is I<highly> recommended to set an EOF callback,
94	otherwise you might end up with a closed socket while you are still
95	waiting for data.
96
97	If an EOF condition has been detected but no C<on_eof> callback has been	219	If an EOF condition has been detected but no C<on_eof> callback has been
98	set, then a fatal error will be raised with C<$!> set to <0>.	220	set, then a fatal error will be raised with C<$!> set to <0>.
99
100	=item on_error => $cb->($handle, $fatal)
101
102	This is the error callback, which is called when, well, some error
103	occured, such as not being able to resolve the hostname, failure to
104	connect or a read error.
105
106	Some errors are fatal (which is indicated by C<$fatal> being true). On
107	fatal errors the handle object will be shut down and will not be usable
108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal
109	errors are an EOF condition with active (but unsatisifable) read watchers
110	(C<EPIPE>) or I/O errors.
111
112	Non-fatal errors can be retried by simply returning, but it is recommended
113	to simply ignore this parameter and instead abondon the handle object
114	when this callback is invoked. Examples of non-fatal errors are timeouts
115	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
116
117	On callback entrance, the value of C<$!> contains the operating system
118	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).
119
120	While not mandatory, it is I<highly> recommended to set this callback, as
121	you will not be notified of errors otherwise. The default simply calls
122	C<croak>.
123
124	=item on_read => $cb->($handle)
125
126	This sets the default read callback, which is called when data arrives
127	and no read request is in the queue (unlike read queue callbacks, this
128	callback will only be called when at least one octet of data is in the
129	read buffer).
130
131	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
132	method or access the C<$handle->{rbuf}> member directly.
133
134	When an EOF condition is detected then AnyEvent::Handle will first try to
135	feed all the remaining data to the queued callbacks and C<on_read> before
136	calling the C<on_eof> callback. If no progress can be made, then a fatal
137	error will be raised (with C<$!> set to C<EPIPE>).
138		221
139	=item on_drain => $cb->($handle)	222	=item on_drain => $cb->($handle)
140		223
141	This sets the callback that is called when the write buffer becomes empty	224	This sets the callback that is called when the write buffer becomes empty
142	(or when the callback is set and the buffer is empty already).	225	(or when the callback is set and the buffer is empty already).
…		…
149	memory and push it into the queue, but instead only read more data from	232	memory and push it into the queue, but instead only read more data from
150	the file when the write queue becomes empty.	233	the file when the write queue becomes empty.
151		234
152	=item timeout => $fractional_seconds	235	=item timeout => $fractional_seconds
153		236
		237	=item rtimeout => $fractional_seconds
		238
		239	=item wtimeout => $fractional_seconds
		240
154	If non-zero, then this enables an "inactivity" timeout: whenever this many	241	If non-zero, then these enables an "inactivity" timeout: whenever this
155	seconds pass without a successful read or write on the underlying file	242	many seconds pass without a successful read or write on the underlying
156	handle, the C<on_timeout> callback will be invoked (and if that one is	243	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
157	missing, a non-fatal C<ETIMEDOUT> error will be raised).	244	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		245	error will be raised).
		246
		247	There are three variants of the timeouts that work fully independent
		248	of each other, for both read and write, just read, and just write:
		249	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		250	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		251	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
158		252
159	Note that timeout processing is also active when you currently do not have	253	Note that timeout processing is also active when you currently do not have
160	any outstanding read or write requests: If you plan to keep the connection	254	any outstanding read or write requests: If you plan to keep the connection
161	idle then you should disable the timout temporarily or ignore the timeout	255	idle then you should disable the timout temporarily or ignore the timeout
162	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply	256	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
…		…
206	accomplishd by setting this option to a true value.	300	accomplishd by setting this option to a true value.
207		301
208	The default is your opertaing system's default behaviour (most likely	302	The default is your opertaing system's default behaviour (most likely
209	enabled), this option explicitly enables or disables it, if possible.	303	enabled), this option explicitly enables or disables it, if possible.
210		304
		305	=item keepalive => <boolean>
		306
		307	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		308	normally, TCP connections have no time-out once established, so TCP
		309	conenctions, once established, can stay alive forever even when the other
		310	side has long gone. TCP keepalives are a cheap way to take down long-lived
		311	TCP connections whent he other side becomes unreachable. While the default
		312	is OS-dependent, TCP keepalives usually kick in after around two hours,
		313	and, if the other side doesn't reply, take down the TCP connection some 10
		314	to 15 minutes later.
		315
		316	It is harmless to specify this option for file handles that do not support
		317	keepalives, and enabling it on connections that are potentially long-lived
		318	is usually a good idea.
		319
		320	=item oobinline => <boolean>
		321
		322	BSD majorly fucked up the implementation of TCP urgent data. The result
		323	is that almost no OS implements TCP according to the specs, and every OS
		324	implements it slightly differently.
		325
		326	If you want to handle TCP urgent data, then setting this flag (the default
		327	is enabled) gives you the most portable way of getting urgent data, by
		328	putting it into the stream.
		329
		330	Since BSD emulation of OOB data on top of TCP's urgent data can have
		331	security implications, AnyEvent::Handle sets this flag automatically
		332	unless explicitly specified. Note that setting this flag after
		333	establishing a connection I<may> be a bit too late (data loss could
		334	already have occured on BSD systems), but at least it will protect you
		335	from most attacks.
		336
211	=item read_size => <bytes>	337	=item read_size => <bytes>
212		338
213	The default read block size (the amount of bytes this module will	339	The default read block size (the amount of bytes this module will
214	try to read during each loop iteration, which affects memory	340	try to read during each loop iteration, which affects memory
215	requirements). Default: C<8192>.	341	requirements). Default: C<8192>.
…		…
235		361
236	This will not work for partial TLS data that could not be encoded	362	This will not work for partial TLS data that could not be encoded
237	yet. This data will be lost. Calling the C<stoptls> method in time might	363	yet. This data will be lost. Calling the C<stoptls> method in time might
238	help.	364	help.
239		365
		366	=item peername => $string
		367
		368	A string used to identify the remote site - usually the DNS hostname
		369	(I<not> IDN!) used to create the connection, rarely the IP address.
		370
		371	Apart from being useful in error messages, this string is also used in TLS
		372	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		373	verification will be skipped when C<peername> is not specified or
		374	C<undef>.
		375
240	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	376	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
241		377
242	When this parameter is given, it enables TLS (SSL) mode, that means	378	When this parameter is given, it enables TLS (SSL) mode, that means
243	AnyEvent will start a TLS handshake as soon as the conenction has been	379	AnyEvent will start a TLS handshake as soon as the conenction has been
244	established and will transparently encrypt/decrypt data afterwards.	380	established and will transparently encrypt/decrypt data afterwards.
		381
		382	All TLS protocol errors will be signalled as C<EPROTO>, with an
		383	appropriate error message.
245		384
246	TLS mode requires Net::SSLeay to be installed (it will be loaded	385	TLS mode requires Net::SSLeay to be installed (it will be loaded
247	automatically when you try to create a TLS handle): this module doesn't	386	automatically when you try to create a TLS handle): this module doesn't
248	have a dependency on that module, so if your module requires it, you have	387	have a dependency on that module, so if your module requires it, you have
249	to add the dependency yourself.	388	to add the dependency yourself.
…		…
253	mode.	392	mode.
254		393
255	You can also provide your own TLS connection object, but you have	394	You can also provide your own TLS connection object, but you have
256	to make sure that you call either C<Net::SSLeay::set_connect_state>	395	to make sure that you call either C<Net::SSLeay::set_connect_state>
257	or C<Net::SSLeay::set_accept_state> on it before you pass it to	396	or C<Net::SSLeay::set_accept_state> on it before you pass it to
258	AnyEvent::Handle.	397	AnyEvent::Handle. Also, this module will take ownership of this connection
		398	object.
		399
		400	At some future point, AnyEvent::Handle might switch to another TLS
		401	implementation, then the option to use your own session object will go
		402	away.
		403
		404	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		405	passing in the wrong integer will lead to certain crash. This most often
		406	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		407	segmentation fault.
259		408
260	See the C<< ->starttls >> method for when need to start TLS negotiation later.	409	See the C<< ->starttls >> method for when need to start TLS negotiation later.
261		410
262	=item tls_ctx => $ssl_ctx	411	=item tls_ctx => $anyevent_tls
263		412
264	Use the given C<Net::SSLeay::CTX> object to create the new TLS connection	413	Use the given C<AnyEvent::TLS> object to create the new TLS connection
265	(unless a connection object was specified directly). If this parameter is	414	(unless a connection object was specified directly). If this parameter is
266	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	415	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
		416
		417	Instead of an object, you can also specify a hash reference with C<< key
		418	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		419	new TLS context object.
		420
		421	=item on_starttls => $cb->($handle, $success[, $error_message])
		422
		423	This callback will be invoked when the TLS/SSL handshake has finished. If
		424	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		425	(C<on_stoptls> will not be called in this case).
		426
		427	The session in C<< $handle->{tls} >> can still be examined in this
		428	callback, even when the handshake was not successful.
		429
		430	TLS handshake failures will not cause C<on_error> to be invoked when this
		431	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		432
		433	Without this callback, handshake failures lead to C<on_error> being
		434	called, as normal.
		435
		436	Note that you cannot call C<starttls> right again in this callback. If you
		437	need to do that, start an zero-second timer instead whose callback can
		438	then call C<< ->starttls >> again.
		439
		440	=item on_stoptls => $cb->($handle)
		441
		442	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		443	set, then it will be invoked after freeing the TLS session. If it is not,
		444	then a TLS shutdown condition will be treated like a normal EOF condition
		445	on the handle.
		446
		447	The session in C<< $handle->{tls} >> can still be examined in this
		448	callback.
		449
		450	This callback will only be called on TLS shutdowns, not when the
		451	underlying handle signals EOF.
267		452
268	=item json => JSON or JSON::XS object	453	=item json => JSON or JSON::XS object
269		454
270	This is the json coder object used by the C<json> read and write types.	455	This is the json coder object used by the C<json> read and write types.
271		456
…		…
280		465
281	=cut	466	=cut
282		467
283	sub new {	468	sub new {
284	my $class = shift;	469	my $class = shift;
285
286	my $self = bless { @_ }, $class;	470	my $self = bless { @_ }, $class;
287		471
288	$self->{fh} or Carp::croak "mandatory argument fh is missing";	472	if ($self->{fh}) {
		473	$self->_start;
		474	return unless $self->{fh}; # could be gone by now
		475
		476	} elsif ($self->{connect}) {
		477	require AnyEvent::Socket;
		478
		479	$self->{peername} = $self->{connect}[0]
		480	unless exists $self->{peername};
		481
		482	$self->{_skip_drain_rbuf} = 1;
		483
		484	{
		485	Scalar::Util::weaken (my $self = $self);
		486
		487	$self->{_connect} =
		488	AnyEvent::Socket::tcp_connect (
		489	$self->{connect}[0],
		490	$self->{connect}[1],
		491	sub {
		492	my ($fh, $host, $port, $retry) = @_;
		493
		494	if ($fh) {
		495	$self->{fh} = $fh;
		496
		497	delete $self->{_skip_drain_rbuf};
		498	$self->_start;
		499
		500	$self->{on_connect}
		501	and $self->{on_connect}($self, $host, $port, sub {
		502	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		503	$self->{_skip_drain_rbuf} = 1;
		504	&$retry;
		505	});
		506
		507	} else {
		508	if ($self->{on_connect_error}) {
		509	$self->{on_connect_error}($self, "$!");
		510	$self->destroy;
		511	} else {
		512	$self->_error ($!, 1);
		513	}
		514	}
		515	},
		516	sub {
		517	local $self->{fh} = $_[0];
		518
		519	$self->{on_prepare}
		520	? $self->{on_prepare}->($self)
		521	: ()
		522	}
		523	);
		524	}
		525
		526	} else {
		527	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		528	}
		529
		530	$self
		531	}
		532
		533	sub _start {
		534	my ($self) = @_;
289		535
290	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	536	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
291		537
		538	$self->{_activity} =
		539	$self->{_ractivity} =
		540	$self->{_wactivity} = AE::now;
		541
		542	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		543	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		544	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		545
		546	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		547	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		548
		549	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		550
292	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})	551	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
293	if $self->{tls};	552	if $self->{tls};
294		553
295	$self->{_activity} = AnyEvent->now;
296	$self->_timeout;
297
298	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	554	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
299	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
300		555
301	$self->start_read	556	$self->start_read
302	if $self->{on_read};	557	if $self->{on_read} || @{ $self->{_queue} };
303		558
304	$self	559	$self->_drain_wbuf;
305	}
306
307	sub _shutdown {
308	my ($self) = @_;
309
310	delete $self->{_tw};
311	delete $self->{_rw};
312	delete $self->{_ww};
313	delete $self->{fh};
314
315	&_freetls;
316
317	delete $self->{on_read};
318	delete $self->{_queue};
319	}	560	}
320		561
321	sub _error {	562	sub _error {
322	my ($self, $errno, $fatal) = @_;	563	my ($self, $errno, $fatal, $message) = @_;
323
324	$self->_shutdown
325	if $fatal;
326		564
327	$! = $errno;	565	$! = $errno;
		566	$message ||= "$!";
328		567
329	if ($self->{on_error}) {	568	if ($self->{on_error}) {
330	$self->{on_error}($self, $fatal);	569	$self->{on_error}($self, $fatal, $message);
		570	$self->destroy if $fatal;
331	} elsif ($self->{fh}) {	571	} elsif ($self->{fh}) {
		572	$self->destroy;
332	Carp::croak "AnyEvent::Handle uncaught error: $!";	573	Carp::croak "AnyEvent::Handle uncaught error: $message";
333	}	574	}
334	}	575	}
335		576
336	=item $fh = $handle->fh	577	=item $fh = $handle->fh
337		578
…		…
361	$_[0]{on_eof} = $_[1];	602	$_[0]{on_eof} = $_[1];
362	}	603	}
363		604
364	=item $handle->on_timeout ($cb)	605	=item $handle->on_timeout ($cb)
365		606
366	Replace the current C<on_timeout> callback, or disables the callback (but	607	=item $handle->on_rtimeout ($cb)
367	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
368	argument and method.
369		608
370	=cut	609	=item $handle->on_wtimeout ($cb)
371		610
372	sub on_timeout {	611	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
373	$_[0]{on_timeout} = $_[1];	612	callback, or disables the callback (but not the timeout) if C<$cb> =
374	}	613	C<undef>. See the C<timeout> constructor argument and method.
		614
		615	=cut
		616
		617	# see below
375		618
376	=item $handle->autocork ($boolean)	619	=item $handle->autocork ($boolean)
377		620
378	Enables or disables the current autocork behaviour (see C<autocork>	621	Enables or disables the current autocork behaviour (see C<autocork>
379	constructor argument).	622	constructor argument). Changes will only take effect on the next write.
380		623
381	=cut	624	=cut
		625
		626	sub autocork {
		627	$_[0]{autocork} = $_[1];
		628	}
382		629
383	=item $handle->no_delay ($boolean)	630	=item $handle->no_delay ($boolean)
384		631
385	Enables or disables the C<no_delay> setting (see constructor argument of	632	Enables or disables the C<no_delay> setting (see constructor argument of
386	the same name for details).	633	the same name for details).
…		…
390	sub no_delay {	637	sub no_delay {
391	$_[0]{no_delay} = $_[1];	638	$_[0]{no_delay} = $_[1];
392		639
393	eval {	640	eval {
394	local $SIG{__DIE__};	641	local $SIG{__DIE__};
395	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	642	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		643	if $_[0]{fh};
396	};	644	};
397	}	645	}
398		646
		647	=item $handle->keepalive ($boolean)
		648
		649	Enables or disables the C<keepalive> setting (see constructor argument of
		650	the same name for details).
		651
		652	=cut
		653
		654	sub keepalive {
		655	$_[0]{keepalive} = $_[1];
		656
		657	eval {
		658	local $SIG{__DIE__};
		659	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		660	if $_[0]{fh};
		661	};
		662	}
		663
		664	=item $handle->oobinline ($boolean)
		665
		666	Enables or disables the C<oobinline> setting (see constructor argument of
		667	the same name for details).
		668
		669	=cut
		670
		671	sub oobinline {
		672	$_[0]{oobinline} = $_[1];
		673
		674	eval {
		675	local $SIG{__DIE__};
		676	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		677	if $_[0]{fh};
		678	};
		679	}
		680
		681	=item $handle->keepalive ($boolean)
		682
		683	Enables or disables the C<keepalive> setting (see constructor argument of
		684	the same name for details).
		685
		686	=cut
		687
		688	sub keepalive {
		689	$_[0]{keepalive} = $_[1];
		690
		691	eval {
		692	local $SIG{__DIE__};
		693	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		694	if $_[0]{fh};
		695	};
		696	}
		697
		698	=item $handle->on_starttls ($cb)
		699
		700	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		701
		702	=cut
		703
		704	sub on_starttls {
		705	$_[0]{on_starttls} = $_[1];
		706	}
		707
		708	=item $handle->on_stoptls ($cb)
		709
		710	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		711
		712	=cut
		713
		714	sub on_starttls {
		715	$_[0]{on_stoptls} = $_[1];
		716	}
		717
		718	=item $handle->rbuf_max ($max_octets)
		719
		720	Configures the C<rbuf_max> setting (C<undef> disables it).
		721
		722	=cut
		723
		724	sub rbuf_max {
		725	$_[0]{rbuf_max} = $_[1];
		726	}
		727
399	#############################################################################	728	#############################################################################
400		729
401	=item $handle->timeout ($seconds)	730	=item $handle->timeout ($seconds)
402		731
		732	=item $handle->rtimeout ($seconds)
		733
		734	=item $handle->wtimeout ($seconds)
		735
403	Configures (or disables) the inactivity timeout.	736	Configures (or disables) the inactivity timeout.
404		737
405	=cut	738	=item $handle->timeout_reset
406		739
407	sub timeout {	740	=item $handle->rtimeout_reset
		741
		742	=item $handle->wtimeout_reset
		743
		744	Reset the activity timeout, as if data was received or sent.
		745
		746	These methods are cheap to call.
		747
		748	=cut
		749
		750	for my $dir ("", "r", "w") {
		751	my $timeout = "${dir}timeout";
		752	my $tw = "_${dir}tw";
		753	my $on_timeout = "on_${dir}timeout";
		754	my $activity = "_${dir}activity";
		755	my $cb;
		756
		757	*$on_timeout = sub {
		758	$_[0]{$on_timeout} = $_[1];
		759	};
		760
		761	*$timeout = sub {
408	my ($self, $timeout) = @_;	762	my ($self, $new_value) = @_;
409		763
410	$self->{timeout} = $timeout;	764	$self->{$timeout} = $new_value;
411	$self->_timeout;	765	delete $self->{$tw}; &$cb;
412	}	766	};
413		767
		768	*{"${dir}timeout_reset"} = sub {
		769	$_[0]{$activity} = AE::now;
		770	};
		771
		772	# main workhorse:
414	# reset the timeout watcher, as neccessary	773	# reset the timeout watcher, as neccessary
415	# also check for time-outs	774	# also check for time-outs
416	sub _timeout {	775	$cb = sub {
417	my ($self) = @_;	776	my ($self) = @_;
418		777
419	if ($self->{timeout}) {	778	if ($self->{$timeout} && $self->{fh}) {
420	my $NOW = AnyEvent->now;	779	my $NOW = AE::now;
421		780
422	# when would the timeout trigger?	781	# when would the timeout trigger?
423	my $after = $self->{_activity} + $self->{timeout} - $NOW;	782	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
424		783
425	# now or in the past already?	784	# now or in the past already?
426	if ($after <= 0) {	785	if ($after <= 0) {
427	$self->{_activity} = $NOW;	786	$self->{$activity} = $NOW;
428		787
429	if ($self->{on_timeout}) {	788	if ($self->{$on_timeout}) {
430	$self->{on_timeout}($self);	789	$self->{$on_timeout}($self);
431	} else {	790	} else {
432	$self->_error (&Errno::ETIMEDOUT);	791	$self->_error (Errno::ETIMEDOUT);
		792	}
		793
		794	# callback could have changed timeout value, optimise
		795	return unless $self->{$timeout};
		796
		797	# calculate new after
		798	$after = $self->{$timeout};
433	}	799	}
434		800
435	# callback could have changed timeout value, optimise	801	Scalar::Util::weaken $self;
436	return unless $self->{timeout};	802	return unless $self; # ->error could have destroyed $self
437		803
438	# calculate new after	804	$self->{$tw} ||= AE::timer $after, 0, sub {
439	$after = $self->{timeout};	805	delete $self->{$tw};
		806	$cb->($self);
		807	};
		808	} else {
		809	delete $self->{$tw};
440	}	810	}
441
442	Scalar::Util::weaken $self;
443	return unless $self; # ->error could have destroyed $self
444
445	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
446	delete $self->{_tw};
447	$self->_timeout;
448	});
449	} else {
450	delete $self->{_tw};
451	}	811	}
452	}	812	}
453		813
454	#############################################################################	814	#############################################################################
455		815
…		…
500	Scalar::Util::weaken $self;	860	Scalar::Util::weaken $self;
501		861
502	my $cb = sub {	862	my $cb = sub {
503	my $len = syswrite $self->{fh}, $self->{wbuf};	863	my $len = syswrite $self->{fh}, $self->{wbuf};
504		864
505	if ($len >= 0) {	865	if (defined $len) {
506	substr $self->{wbuf}, 0, $len, "";	866	substr $self->{wbuf}, 0, $len, "";
507		867
508	$self->{_activity} = AnyEvent->now;	868	$self->{_activity} = $self->{_wactivity} = AE::now;
509		869
510	$self->{on_drain}($self)	870	$self->{on_drain}($self)
511	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})	871	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
512	&& $self->{on_drain};	872	&& $self->{on_drain};
513		873
…		…
519		879
520	# try to write data immediately	880	# try to write data immediately
521	$cb->() unless $self->{autocork};	881	$cb->() unless $self->{autocork};
522		882
523	# if still data left in wbuf, we need to poll	883	# if still data left in wbuf, we need to poll
524	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	884	$self->{_ww} = AE::io $self->{fh}, 1, $cb
525	if length $self->{wbuf};	885	if length $self->{wbuf};
526	};	886	};
527	}	887	}
528		888
529	our %WH;	889	our %WH;
530		890
		891	# deprecated
531	sub register_write_type($$) {	892	sub register_write_type($$) {
532	$WH{$_[0]} = $_[1];	893	$WH{$_[0]} = $_[1];
533	}	894	}
534		895
535	sub push_write {	896	sub push_write {
536	my $self = shift;	897	my $self = shift;
537		898
538	if (@_ > 1) {	899	if (@_ > 1) {
539	my $type = shift;	900	my $type = shift;
540		901
		902	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
541	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	903	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
542	->($self, @_);	904	->($self, @_);
543	}	905	}
544		906
545	if ($self->{tls}) {	907	if ($self->{tls}) {
546	$self->{_tls_wbuf} .= $_[0];	908	$self->{_tls_wbuf} .= $_[0];
547		909	&_dotls ($self) if $self->{fh};
548	&_dotls ($self);
549	} else {	910	} else {
550	$self->{wbuf} .= $_[0];	911	$self->{wbuf} .= $_[0];
551	$self->_drain_wbuf;	912	$self->_drain_wbuf if $self->{fh};
552	}	913	}
553	}	914	}
554		915
555	=item $handle->push_write (type => @args)	916	=item $handle->push_write (type => @args)
556		917
557	Instead of formatting your data yourself, you can also let this module do	918	Instead of formatting your data yourself, you can also let this module
558	the job by specifying a type and type-specific arguments.	919	do the job by specifying a type and type-specific arguments. You
		920	can also specify the (fully qualified) name of a package, in which
		921	case AnyEvent tries to load the package and then expects to find the
		922	C<anyevent_read_type> function inside (see "custom write types", below).
559		923
560	Predefined types are (if you have ideas for additional types, feel free to	924	Predefined types are (if you have ideas for additional types, feel free to
561	drop by and tell us):	925	drop by and tell us):
562		926
563	=over 4	927	=over 4
…		…
620	Other languages could read single lines terminated by a newline and pass	984	Other languages could read single lines terminated by a newline and pass
621	this line into their JSON decoder of choice.	985	this line into their JSON decoder of choice.
622		986
623	=cut	987	=cut
624		988
		989	sub json_coder() {
		990	eval { require JSON::XS; JSON::XS->new->utf8 }
		991	|| do { require JSON; JSON->new->utf8 }
		992	}
		993
625	register_write_type json => sub {	994	register_write_type json => sub {
626	my ($self, $ref) = @_;	995	my ($self, $ref) = @_;
627		996
628	require JSON;	997	my $json = $self->{json} ||= json_coder;
629		998
630	$self->{json} ? $self->{json}->encode ($ref)	999	$json->encode ($ref)
631	: JSON::encode_json ($ref)
632	};	1000	};
633		1001
634	=item storable => $reference	1002	=item storable => $reference
635		1003
636	Freezes the given reference using L<Storable> and writes it to the	1004	Freezes the given reference using L<Storable> and writes it to the
…		…
646	pack "w/a*", Storable::nfreeze ($ref)	1014	pack "w/a*", Storable::nfreeze ($ref)
647	};	1015	};
648		1016
649	=back	1017	=back
650		1018
651	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1019	=item $handle->push_shutdown
652		1020
653	This function (not method) lets you add your own types to C<push_write>.	1021	Sometimes you know you want to close the socket after writing your data
		1022	before it was actually written. One way to do that is to replace your
		1023	C<on_drain> handler by a callback that shuts down the socket (and set
		1024	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1025	replaces the C<on_drain> callback with:
		1026
		1027	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		1028
		1029	This simply shuts down the write side and signals an EOF condition to the
		1030	the peer.
		1031
		1032	You can rely on the normal read queue and C<on_eof> handling
		1033	afterwards. This is the cleanest way to close a connection.
		1034
		1035	=cut
		1036
		1037	sub push_shutdown {
		1038	my ($self) = @_;
		1039
		1040	delete $self->{low_water_mark};
		1041	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1042	}
		1043
		1044	=item custom write types - Package::anyevent_write_type $handle, @args
		1045
		1046	Instead of one of the predefined types, you can also specify the name of
		1047	a package. AnyEvent will try to load the package and then expects to find
		1048	a function named C<anyevent_write_type> inside. If it isn't found, it
		1049	progressively tries to load the parent package until it either finds the
		1050	function (good) or runs out of packages (bad).
		1051
654	Whenever the given C<type> is used, C<push_write> will invoke the code	1052	Whenever the given C<type> is used, C<push_write> will the function with
655	reference with the handle object and the remaining arguments.	1053	the handle object and the remaining arguments.
656		1054
657	The code reference is supposed to return a single octet string that will	1055	The function is supposed to return a single octet string that will be
658	be appended to the write buffer.	1056	appended to the write buffer, so you cna mentally treat this function as a
		1057	"arguments to on-the-wire-format" converter.
659		1058
660	Note that this is a function, and all types registered this way will be	1059	Example: implement a custom write type C<join> that joins the remaining
661	global, so try to use unique names.	1060	arguments using the first one.
		1061
		1062	$handle->push_write (My::Type => " ", 1,2,3);
		1063
		1064	# uses the following package, which can be defined in the "My::Type" or in
		1065	# the "My" modules to be auto-loaded, or just about anywhere when the
		1066	# My::Type::anyevent_write_type is defined before invoking it.
		1067
		1068	package My::Type;
		1069
		1070	sub anyevent_write_type {
		1071	my ($handle, $delim, @args) = @_;
		1072
		1073	join $delim, @args
		1074	}
662		1075
663	=cut	1076	=cut
664		1077
665	#############################################################################	1078	#############################################################################
666		1079
…		…
748	=cut	1161	=cut
749		1162
750	sub _drain_rbuf {	1163	sub _drain_rbuf {
751	my ($self) = @_;	1164	my ($self) = @_;
752		1165
		1166	# avoid recursion
		1167	return if $self->{_skip_drain_rbuf};
753	local $self->{_in_drain} = 1;	1168	local $self->{_skip_drain_rbuf} = 1;
754
755	if (
756	defined $self->{rbuf_max}
757	&& $self->{rbuf_max} < length $self->{rbuf}
758	) {
759	$self->_error (&Errno::ENOSPC, 1), return;
760	}
761		1169
762	while () {	1170	while () {
		1171	# we need to use a separate tls read buffer, as we must not receive data while
		1172	# we are draining the buffer, and this can only happen with TLS.
		1173	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1174	if exists $self->{_tls_rbuf};
		1175
763	my $len = length $self->{rbuf};	1176	my $len = length $self->{rbuf};
764		1177
765	if (my $cb = shift @{ $self->{_queue} }) {	1178	if (my $cb = shift @{ $self->{_queue} }) {
766	unless ($cb->($self)) {	1179	unless ($cb->($self)) {
767	if ($self->{_eof}) {	1180	# no progress can be made
768	# no progress can be made (not enough data and no data forthcoming)	1181	# (not enough data and no data forthcoming)
769	$self->_error (&Errno::EPIPE, 1), return;	1182	$self->_error (Errno::EPIPE, 1), return
770	}	1183	if $self->{_eof};
771		1184
772	unshift @{ $self->{_queue} }, $cb;	1185	unshift @{ $self->{_queue} }, $cb;
773	last;	1186	last;
774	}	1187	}
775	} elsif ($self->{on_read}) {	1188	} elsif ($self->{on_read}) {
…		…
782	&& !@{ $self->{_queue} } # and the queue is still empty	1195	&& !@{ $self->{_queue} } # and the queue is still empty
783	&& $self->{on_read} # but we still have on_read	1196	&& $self->{on_read} # but we still have on_read
784	) {	1197	) {
785	# no further data will arrive	1198	# no further data will arrive
786	# so no progress can be made	1199	# so no progress can be made
787	$self->_error (&Errno::EPIPE, 1), return	1200	$self->_error (Errno::EPIPE, 1), return
788	if $self->{_eof};	1201	if $self->{_eof};
789		1202
790	last; # more data might arrive	1203	last; # more data might arrive
791	}	1204	}
792	} else {	1205	} else {
…		…
795	last;	1208	last;
796	}	1209	}
797	}	1210	}
798		1211
799	if ($self->{_eof}) {	1212	if ($self->{_eof}) {
800	if ($self->{on_eof}) {	1213	$self->{on_eof}
801	$self->{on_eof}($self)	1214	? $self->{on_eof}($self)
802	} else {	1215	: $self->_error (0, 1, "Unexpected end-of-file");
803	$self->_error (0, 1);	1216
804	}	1217	return;
		1218	}
		1219
		1220	if (
		1221	defined $self->{rbuf_max}
		1222	&& $self->{rbuf_max} < length $self->{rbuf}
		1223	) {
		1224	$self->_error (Errno::ENOSPC, 1), return;
805	}	1225	}
806		1226
807	# may need to restart read watcher	1227	# may need to restart read watcher
808	unless ($self->{_rw}) {	1228	unless ($self->{_rw}) {
809	$self->start_read	1229	$self->start_read
…		…
821		1241
822	sub on_read {	1242	sub on_read {
823	my ($self, $cb) = @_;	1243	my ($self, $cb) = @_;
824		1244
825	$self->{on_read} = $cb;	1245	$self->{on_read} = $cb;
826	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1246	$self->_drain_rbuf if $cb;
827	}	1247	}
828		1248
829	=item $handle->rbuf	1249	=item $handle->rbuf
830		1250
831	Returns the read buffer (as a modifiable lvalue).	1251	Returns the read buffer (as a modifiable lvalue).
832		1252
833	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1253	You can access the read buffer directly as the C<< ->{rbuf} >>
834	you want.	1254	member, if you want. However, the only operation allowed on the
		1255	read buffer (apart from looking at it) is removing data from its
		1256	beginning. Otherwise modifying or appending to it is not allowed and will
		1257	lead to hard-to-track-down bugs.
835		1258
836	NOTE: The read buffer should only be used or modified if the C<on_read>,	1259	NOTE: The read buffer should only be used or modified if the C<on_read>,
837	C<push_read> or C<unshift_read> methods are used. The other read methods	1260	C<push_read> or C<unshift_read> methods are used. The other read methods
838	automatically manage the read buffer.	1261	automatically manage the read buffer.
839		1262
…		…
875	my $cb = pop;	1298	my $cb = pop;
876		1299
877	if (@_) {	1300	if (@_) {
878	my $type = shift;	1301	my $type = shift;
879		1302
		1303	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
880	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1304	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
881	->($self, $cb, @_);	1305	->($self, $cb, @_);
882	}	1306	}
883		1307
884	push @{ $self->{_queue} }, $cb;	1308	push @{ $self->{_queue} }, $cb;
885	$self->_drain_rbuf unless $self->{_in_drain};	1309	$self->_drain_rbuf;
886	}	1310	}
887		1311
888	sub unshift_read {	1312	sub unshift_read {
889	my $self = shift;	1313	my $self = shift;
890	my $cb = pop;	1314	my $cb = pop;
…		…
894		1318
895	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1319	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
896	->($self, $cb, @_);	1320	->($self, $cb, @_);
897	}	1321	}
898		1322
899
900	unshift @{ $self->{_queue} }, $cb;	1323	unshift @{ $self->{_queue} }, $cb;
901	$self->_drain_rbuf unless $self->{_in_drain};	1324	$self->_drain_rbuf;
902	}	1325	}
903		1326
904	=item $handle->push_read (type => @args, $cb)	1327	=item $handle->push_read (type => @args, $cb)
905		1328
906	=item $handle->unshift_read (type => @args, $cb)	1329	=item $handle->unshift_read (type => @args, $cb)
907		1330
908	Instead of providing a callback that parses the data itself you can chose	1331	Instead of providing a callback that parses the data itself you can chose
909	between a number of predefined parsing formats, for chunks of data, lines	1332	between a number of predefined parsing formats, for chunks of data, lines
910	etc.	1333	etc. You can also specify the (fully qualified) name of a package, in
		1334	which case AnyEvent tries to load the package and then expects to find the
		1335	C<anyevent_read_type> function inside (see "custom read types", below).
911		1336
912	Predefined types are (if you have ideas for additional types, feel free to	1337	Predefined types are (if you have ideas for additional types, feel free to
913	drop by and tell us):	1338	drop by and tell us):
914		1339
915	=over 4	1340	=over 4
…		…
1039	return 1;	1464	return 1;
1040	}	1465	}
1041		1466
1042	# reject	1467	# reject
1043	if ($reject && $$rbuf =~ $reject) {	1468	if ($reject && $$rbuf =~ $reject) {
1044	$self->_error (&Errno::EBADMSG);	1469	$self->_error (Errno::EBADMSG);
1045	}	1470	}
1046		1471
1047	# skip	1472	# skip
1048	if ($skip && $$rbuf =~ $skip) {	1473	if ($skip && $$rbuf =~ $skip) {
1049	$data .= substr $$rbuf, 0, $+[0], "";	1474	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1065	my ($self, $cb) = @_;	1490	my ($self, $cb) = @_;
1066		1491
1067	sub {	1492	sub {
1068	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1493	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1069	if ($_[0]{rbuf} =~ /[^0-9]/) {	1494	if ($_[0]{rbuf} =~ /[^0-9]/) {
1070	$self->_error (&Errno::EBADMSG);	1495	$self->_error (Errno::EBADMSG);
1071	}	1496	}
1072	return;	1497	return;
1073	}	1498	}
1074		1499
1075	my $len = $1;	1500	my $len = $1;
…		…
1078	my $string = $_[1];	1503	my $string = $_[1];
1079	$_[0]->unshift_read (chunk => 1, sub {	1504	$_[0]->unshift_read (chunk => 1, sub {
1080	if ($_[1] eq ",") {	1505	if ($_[1] eq ",") {
1081	$cb->($_[0], $string);	1506	$cb->($_[0], $string);
1082	} else {	1507	} else {
1083	$self->_error (&Errno::EBADMSG);	1508	$self->_error (Errno::EBADMSG);
1084	}	1509	}
1085	});	1510	});
1086	});	1511	});
1087		1512
1088	1	1513	1
…		…
1135	}	1560	}
1136	};	1561	};
1137		1562
1138	=item json => $cb->($handle, $hash_or_arrayref)	1563	=item json => $cb->($handle, $hash_or_arrayref)
1139		1564
1140	Reads a JSON object or array, decodes it and passes it to the callback.	1565	Reads a JSON object or array, decodes it and passes it to the
		1566	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1141		1567
1142	If a C<json> object was passed to the constructor, then that will be used	1568	If a C<json> object was passed to the constructor, then that will be used
1143	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1569	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1144		1570
1145	This read type uses the incremental parser available with JSON version	1571	This read type uses the incremental parser available with JSON version
…		…
1154	=cut	1580	=cut
1155		1581
1156	register_read_type json => sub {	1582	register_read_type json => sub {
1157	my ($self, $cb) = @_;	1583	my ($self, $cb) = @_;
1158		1584
1159	require JSON;	1585	my $json = $self->{json} ||= json_coder;
1160		1586
1161	my $data;	1587	my $data;
1162	my $rbuf = \$self->{rbuf};	1588	my $rbuf = \$self->{rbuf};
1163		1589
1164	my $json = $self->{json} ||= JSON->new->utf8;
1165
1166	sub {	1590	sub {
1167	my $ref = $json->incr_parse ($self->{rbuf});	1591	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1168		1592
1169	if ($ref) {	1593	if ($ref) {
1170	$self->{rbuf} = $json->incr_text;	1594	$self->{rbuf} = $json->incr_text;
1171	$json->incr_text = "";	1595	$json->incr_text = "";
1172	$cb->($self, $ref);	1596	$cb->($self, $ref);
1173		1597
1174	1	1598	1
		1599	} elsif ($@) {
		1600	# error case
		1601	$json->incr_skip;
		1602
		1603	$self->{rbuf} = $json->incr_text;
		1604	$json->incr_text = "";
		1605
		1606	$self->_error (Errno::EBADMSG);
		1607
		1608	()
1175	} else {	1609	} else {
1176	$self->{rbuf} = "";	1610	$self->{rbuf} = "";
		1611
1177	()	1612	()
1178	}	1613	}
1179	}	1614	}
1180	};	1615	};
1181		1616
…		…
1213	# read remaining chunk	1648	# read remaining chunk
1214	$_[0]->unshift_read (chunk => $len, sub {	1649	$_[0]->unshift_read (chunk => $len, sub {
1215	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1650	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1216	$cb->($_[0], $ref);	1651	$cb->($_[0], $ref);
1217	} else {	1652	} else {
1218	$self->_error (&Errno::EBADMSG);	1653	$self->_error (Errno::EBADMSG);
1219	}	1654	}
1220	});	1655	});
1221	}	1656	}
1222		1657
1223	1	1658	1
1224	}	1659	}
1225	};	1660	};
1226		1661
1227	=back	1662	=back
1228		1663
1229	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1664	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1230		1665
1231	This function (not method) lets you add your own types to C<push_read>.	1666	Instead of one of the predefined types, you can also specify the name
		1667	of a package. AnyEvent will try to load the package and then expects to
		1668	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1669	progressively tries to load the parent package until it either finds the
		1670	function (good) or runs out of packages (bad).
1232		1671
1233	Whenever the given C<type> is used, C<push_read> will invoke the code	1672	Whenever this type is used, C<push_read> will invoke the function with the
1234	reference with the handle object, the callback and the remaining	1673	handle object, the original callback and the remaining arguments.
1235	arguments.
1236		1674
1237	The code reference is supposed to return a callback (usually a closure)	1675	The function is supposed to return a callback (usually a closure) that
1238	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1676	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1677	mentally treat the function as a "configurable read type to read callback"
		1678	converter.
1239		1679
1240	It should invoke the passed callback when it is done reading (remember to	1680	It should invoke the original callback when it is done reading (remember
1241	pass C<$handle> as first argument as all other callbacks do that).	1681	to pass C<$handle> as first argument as all other callbacks do that,
		1682	although there is no strict requirement on this).
1242		1683
1243	Note that this is a function, and all types registered this way will be
1244	global, so try to use unique names.
1245
1246	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1684	For examples, see the source of this module (F<perldoc -m
1247	search for C<register_read_type>)).	1685	AnyEvent::Handle>, search for C<register_read_type>)).
1248		1686
1249	=item $handle->stop_read	1687	=item $handle->stop_read
1250		1688
1251	=item $handle->start_read	1689	=item $handle->start_read
1252		1690
…		…
1275	my ($self) = @_;	1713	my ($self) = @_;
1276		1714
1277	unless ($self->{_rw} || $self->{_eof}) {	1715	unless ($self->{_rw} || $self->{_eof}) {
1278	Scalar::Util::weaken $self;	1716	Scalar::Util::weaken $self;
1279		1717
1280	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1718	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1281	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});	1719	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1282	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1720	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
1283		1721
1284	if ($len > 0) {	1722	if ($len > 0) {
1285	$self->{_activity} = AnyEvent->now;	1723	$self->{_activity} = $self->{_ractivity} = AE::now;
1286		1724
1287	if ($self->{tls}) {	1725	if ($self->{tls}) {
1288	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);	1726	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1289		1727
1290	&_dotls ($self);	1728	&_dotls ($self);
1291	} else {	1729	} else {
1292	$self->_drain_rbuf unless $self->{_in_drain};	1730	$self->_drain_rbuf;
1293	}	1731	}
1294		1732
1295	} elsif (defined $len) {	1733	} elsif (defined $len) {
1296	delete $self->{_rw};	1734	delete $self->{_rw};
1297	$self->{_eof} = 1;	1735	$self->{_eof} = 1;
1298	$self->_drain_rbuf unless $self->{_in_drain};	1736	$self->_drain_rbuf;
1299		1737
1300	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1738	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1301	return $self->_error ($!, 1);	1739	return $self->_error ($!, 1);
1302	}	1740	}
1303	});	1741	};
		1742	}
		1743	}
		1744
		1745	our $ERROR_SYSCALL;
		1746	our $ERROR_WANT_READ;
		1747
		1748	sub _tls_error {
		1749	my ($self, $err) = @_;
		1750
		1751	return $self->_error ($!, 1)
		1752	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1753
		1754	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1755
		1756	# reduce error string to look less scary
		1757	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1758
		1759	if ($self->{_on_starttls}) {
		1760	(delete $self->{_on_starttls})->($self, undef, $err);
		1761	&_freetls;
		1762	} else {
		1763	&_freetls;
		1764	$self->_error (Errno::EPROTO, 1, $err);
1304	}	1765	}
1305	}	1766	}
1306		1767
1307	# poll the write BIO and send the data if applicable	1768	# poll the write BIO and send the data if applicable
		1769	# also decode read data if possible
		1770	# this is basiclaly our TLS state machine
		1771	# more efficient implementations are possible with openssl,
		1772	# but not with the buggy and incomplete Net::SSLeay.
1308	sub _dotls {	1773	sub _dotls {
1309	my ($self) = @_;	1774	my ($self) = @_;
1310		1775
1311	my $tmp;	1776	my $tmp;
1312		1777
1313	if (length $self->{_tls_wbuf}) {	1778	if (length $self->{_tls_wbuf}) {
1314	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1779	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1315	substr $self->{_tls_wbuf}, 0, $tmp, "";	1780	substr $self->{_tls_wbuf}, 0, $tmp, "";
1316	}	1781	}
		1782
		1783	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1784	return $self->_tls_error ($tmp)
		1785	if $tmp != $ERROR_WANT_READ
		1786	&& ($tmp != $ERROR_SYSCALL || $!);
1317	}	1787	}
1318		1788
1319	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {	1789	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
1320	unless (length $tmp) {	1790	unless (length $tmp) {
1321	# let's treat SSL-eof as we treat normal EOF	1791	$self->{_on_starttls}
1322	delete $self->{_rw};	1792	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
1323	$self->{_eof} = 1;
1324	&_freetls;	1793	&_freetls;
		1794
		1795	if ($self->{on_stoptls}) {
		1796	$self->{on_stoptls}($self);
		1797	return;
		1798	} else {
		1799	# let's treat SSL-eof as we treat normal EOF
		1800	delete $self->{_rw};
		1801	$self->{_eof} = 1;
		1802	}
1325	}	1803	}
1326		1804
1327	$self->{rbuf} .= $tmp;	1805	$self->{_tls_rbuf} .= $tmp;
1328	$self->_drain_rbuf unless $self->{_in_drain};	1806	$self->_drain_rbuf;
1329	$self->{tls} or return; # tls session might have gone away in callback	1807	$self->{tls} or return; # tls session might have gone away in callback
1330	}	1808	}
1331		1809
1332	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);	1810	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
1333
1334	if ($tmp != Net::SSLeay::ERROR_WANT_READ ()) {
1335	if ($tmp == Net::SSLeay::ERROR_SYSCALL ()) {
1336	return $self->_error ($!, 1);	1811	return $self->_tls_error ($tmp)
1337	} elsif ($tmp == Net::SSLeay::ERROR_SSL ()) {	1812	if $tmp != $ERROR_WANT_READ
1338	return $self->_error (&Errno::EIO, 1);	1813	&& ($tmp != $ERROR_SYSCALL || $!);
1339	}
1340
1341	# all other errors are fine for our purposes
1342	}
1343		1814
1344	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1815	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1345	$self->{wbuf} .= $tmp;	1816	$self->{wbuf} .= $tmp;
1346	$self->_drain_wbuf;	1817	$self->_drain_wbuf;
1347	}	1818	}
		1819
		1820	$self->{_on_starttls}
		1821	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
		1822	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1348	}	1823	}
1349		1824
1350	=item $handle->starttls ($tls[, $tls_ctx])	1825	=item $handle->starttls ($tls[, $tls_ctx])
1351		1826
1352	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1827	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1353	object is created, you can also do that at a later time by calling	1828	object is created, you can also do that at a later time by calling
1354	C<starttls>.	1829	C<starttls>.
1355		1830
		1831	Starting TLS is currently an asynchronous operation - when you push some
		1832	write data and then call C<< ->starttls >> then TLS negotiation will start
		1833	immediately, after which the queued write data is then sent.
		1834
1356	The first argument is the same as the C<tls> constructor argument (either	1835	The first argument is the same as the C<tls> constructor argument (either
1357	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1836	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1358		1837
1359	The second argument is the optional C<Net::SSLeay::CTX> object that is	1838	The second argument is the optional C<AnyEvent::TLS> object that is used
1360	used when AnyEvent::Handle has to create its own TLS connection object.	1839	when AnyEvent::Handle has to create its own TLS connection object, or
		1840	a hash reference with C<< key => value >> pairs that will be used to
		1841	construct a new context.
1361		1842
1362	The TLS connection object will end up in C<< $handle->{tls} >> after this	1843	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1363	call and can be used or changed to your liking. Note that the handshake	1844	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1364	might have already started when this function returns.	1845	changed to your liking. Note that the handshake might have already started
		1846	when this function returns.
1365		1847
1366	If it an error to start a TLS handshake more than once per	1848	Due to bugs in OpenSSL, it might or might not be possible to do multiple
1367	AnyEvent::Handle object (this is due to bugs in OpenSSL).	1849	handshakes on the same stream. Best do not attempt to use the stream after
		1850	stopping TLS.
1368		1851
1369	=cut	1852	=cut
		1853
		1854	our %TLS_CACHE; #TODO not yet documented, should we?
1370		1855
1371	sub starttls {	1856	sub starttls {
1372	my ($self, $ssl, $ctx) = @_;	1857	my ($self, $tls, $ctx) = @_;
		1858
		1859	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1860	if $self->{tls};
		1861
		1862	$self->{tls} = $tls;
		1863	$self->{tls_ctx} = $ctx if @_ > 2;
		1864
		1865	return unless $self->{fh};
1373		1866
1374	require Net::SSLeay;	1867	require Net::SSLeay;
1375		1868
1376	Carp::croak "it is an error to call starttls more than once on an Anyevent::Handle object"	1869	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
1377	if $self->{tls};	1870	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1871
		1872	$tls = delete $self->{tls};
		1873	$ctx = $self->{tls_ctx};
		1874
		1875	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1876
		1877	if ("HASH" eq ref $ctx) {
		1878	require AnyEvent::TLS;
		1879
		1880	if ($ctx->{cache}) {
		1881	my $key = $ctx+0;
		1882	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1883	} else {
		1884	$ctx = new AnyEvent::TLS %$ctx;
		1885	}
		1886	}
1378		1887
1379	if ($ssl eq "accept") {	1888	$self->{tls_ctx} = $ctx || TLS_CTX ();
1380	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1889	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1381	Net::SSLeay::set_accept_state ($ssl);
1382	} elsif ($ssl eq "connect") {
1383	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());
1384	Net::SSLeay::set_connect_state ($ssl);
1385	}
1386
1387	$self->{tls} = $ssl;
1388		1890
1389	# basically, this is deep magic (because SSL_read should have the same issues)	1891	# basically, this is deep magic (because SSL_read should have the same issues)
1390	# but the openssl maintainers basically said: "trust us, it just works".	1892	# but the openssl maintainers basically said: "trust us, it just works".
1391	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1893	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1392	# and mismaintained ssleay-module doesn't even offer them).	1894	# and mismaintained ssleay-module doesn't even offer them).
…		…
1396	#	1898	#
1397	# note that we do not try to keep the length constant between writes as we are required to do.	1899	# note that we do not try to keep the length constant between writes as we are required to do.
1398	# we assume that most (but not all) of this insanity only applies to non-blocking cases,	1900	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
1399	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to	1901	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
1400	# have identity issues in that area.	1902	# have identity issues in that area.
1401	Net::SSLeay::CTX_set_mode ($self->{tls},	1903	# Net::SSLeay::CTX_set_mode ($ssl,
1402	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1904	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1403	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1905	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1906	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1404		1907
1405	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1908	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1406	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1909	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1407		1910
		1911	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1912
1408	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1913	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
		1914
		1915	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
		1916	if $self->{on_starttls};
1409		1917
1410	&_dotls; # need to trigger the initial handshake	1918	&_dotls; # need to trigger the initial handshake
1411	$self->start_read; # make sure we actually do read	1919	$self->start_read; # make sure we actually do read
1412	}	1920	}
1413		1921
1414	=item $handle->stoptls	1922	=item $handle->stoptls
1415		1923
1416	Shuts down the SSL connection - this makes a proper EOF handshake by	1924	Shuts down the SSL connection - this makes a proper EOF handshake by
1417	sending a close notify to the other side, but since OpenSSL doesn't	1925	sending a close notify to the other side, but since OpenSSL doesn't
1418	support non-blocking shut downs, it is not possible to re-use the stream	1926	support non-blocking shut downs, it is not guarenteed that you can re-use
1419	afterwards.	1927	the stream afterwards.
1420		1928
1421	=cut	1929	=cut
1422		1930
1423	sub stoptls {	1931	sub stoptls {
1424	my ($self) = @_;	1932	my ($self) = @_;
…		…
1426	if ($self->{tls}) {	1934	if ($self->{tls}) {
1427	Net::SSLeay::shutdown ($self->{tls});	1935	Net::SSLeay::shutdown ($self->{tls});
1428		1936
1429	&_dotls;	1937	&_dotls;
1430		1938
1431	# we don't give a shit. no, we do, but we can't. no...	1939	# # we don't give a shit. no, we do, but we can't. no...#d#
1432	# we, we... have to use openssl :/	1940	# # we, we... have to use openssl :/#d#
1433	&_freetls;	1941	# &_freetls;#d#
1434	}	1942	}
1435	}	1943	}
1436		1944
1437	sub _freetls {	1945	sub _freetls {
1438	my ($self) = @_;	1946	my ($self) = @_;
1439		1947
1440	return unless $self->{tls};	1948	return unless $self->{tls};
1441		1949
1442	Net::SSLeay::free (delete $self->{tls});	1950	$self->{tls_ctx}->_put_session (delete $self->{tls})
		1951	if $self->{tls} > 0;
1443		1952
1444	delete @$self{qw(_rbio _wbio _tls_wbuf)};	1953	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1445	}	1954	}
1446		1955
1447	sub DESTROY {	1956	sub DESTROY {
1448	my $self = shift;	1957	my ($self) = @_;
1449		1958
1450	&_freetls;	1959	&_freetls;
1451		1960
1452	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	1961	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1453		1962
1454	if ($linger && length $self->{wbuf}) {	1963	if ($linger && length $self->{wbuf} && $self->{fh}) {
1455	my $fh = delete $self->{fh};	1964	my $fh = delete $self->{fh};
1456	my $wbuf = delete $self->{wbuf};	1965	my $wbuf = delete $self->{wbuf};
1457		1966
1458	my @linger;	1967	my @linger;
1459		1968
1460	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	1969	push @linger, AE::io $fh, 1, sub {
1461	my $len = syswrite $fh, $wbuf, length $wbuf;	1970	my $len = syswrite $fh, $wbuf, length $wbuf;
1462		1971
1463	if ($len > 0) {	1972	if ($len > 0) {
1464	substr $wbuf, 0, $len, "";	1973	substr $wbuf, 0, $len, "";
1465	} else {	1974	} else {
1466	@linger = (); # end	1975	@linger = (); # end
1467	}	1976	}
1468	});	1977	};
1469	push @linger, AnyEvent->timer (after => $linger, cb => sub {	1978	push @linger, AE::timer $linger, 0, sub {
1470	@linger = ();	1979	@linger = ();
1471	});	1980	};
1472	}	1981	}
1473	}	1982	}
1474		1983
1475	=item $handle->destroy	1984	=item $handle->destroy
1476		1985
1477	Shuts down the handle object as much as possible - this call ensures that	1986	Shuts down the handle object as much as possible - this call ensures that
1478	no further callbacks will be invoked and resources will be freed as much	1987	no further callbacks will be invoked and as many resources as possible
1479	as possible. You must not call any methods on the object afterwards.	1988	will be freed. Any method you will call on the handle object after
		1989	destroying it in this way will be silently ignored (and it will return the
		1990	empty list).
1480		1991
1481	Normally, you can just "forget" any references to an AnyEvent::Handle	1992	Normally, you can just "forget" any references to an AnyEvent::Handle
1482	object and it will simply shut down. This works in fatal error and EOF	1993	object and it will simply shut down. This works in fatal error and EOF
1483	callbacks, as well as code outside. It does I<NOT> work in a read or write	1994	callbacks, as well as code outside. It does I<NOT> work in a read or write
1484	callback, so when you want to destroy the AnyEvent::Handle object from	1995	callback, so when you want to destroy the AnyEvent::Handle object from
1485	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in	1996	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
1486	that case.	1997	that case.
1487		1998
		1999	Destroying the handle object in this way has the advantage that callbacks
		2000	will be removed as well, so if those are the only reference holders (as
		2001	is common), then one doesn't need to do anything special to break any
		2002	reference cycles.
		2003
1488	The handle might still linger in the background and write out remaining	2004	The handle might still linger in the background and write out remaining
1489	data, as specified by the C<linger> option, however.	2005	data, as specified by the C<linger> option, however.
1490		2006
1491	=cut	2007	=cut
1492		2008
1493	sub destroy {	2009	sub destroy {
1494	my ($self) = @_;	2010	my ($self) = @_;
1495		2011
1496	$self->DESTROY;	2012	$self->DESTROY;
1497	%$self = ();	2013	%$self = ();
		2014	bless $self, "AnyEvent::Handle::destroyed";
		2015	}
		2016
		2017	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2018	#nop
1498	}	2019	}
1499		2020
1500	=item AnyEvent::Handle::TLS_CTX	2021	=item AnyEvent::Handle::TLS_CTX
1501		2022
1502	This function creates and returns the Net::SSLeay::CTX object used by	2023	This function creates and returns the AnyEvent::TLS object used by default
1503	default for TLS mode.	2024	for TLS mode.
1504		2025
1505	The context is created like this:	2026	The context is created by calling L<AnyEvent::TLS> without any arguments.
1506
1507	Net::SSLeay::load_error_strings;
1508	Net::SSLeay::SSLeay_add_ssl_algorithms;
1509	Net::SSLeay::randomize;
1510
1511	my $CTX = Net::SSLeay::CTX_new;
1512
1513	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1514		2027
1515	=cut	2028	=cut
1516		2029
1517	our $TLS_CTX;	2030	our $TLS_CTX;
1518		2031
1519	sub TLS_CTX() {	2032	sub TLS_CTX() {
1520	$TLS_CTX || do {	2033	$TLS_CTX ||= do {
1521	require Net::SSLeay;	2034	require AnyEvent::TLS;
1522		2035
1523	Net::SSLeay::load_error_strings ();	2036	new AnyEvent::TLS
1524	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1525	Net::SSLeay::randomize ();
1526
1527	$TLS_CTX = Net::SSLeay::CTX_new ();
1528
1529	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1530
1531	$TLS_CTX
1532	}	2037	}
1533	}	2038	}
1534		2039
1535	=back	2040	=back
1536		2041
…		…
1575		2080
1576	$handle->on_read (sub { });	2081	$handle->on_read (sub { });
1577	$handle->on_eof (undef);	2082	$handle->on_eof (undef);
1578	$handle->on_error (sub {	2083	$handle->on_error (sub {
1579	my $data = delete $_[0]{rbuf};	2084	my $data = delete $_[0]{rbuf};
1580	undef $handle;
1581	});	2085	});
1582		2086
1583	The reason to use C<on_error> is that TCP connections, due to latencies	2087	The reason to use C<on_error> is that TCP connections, due to latencies
1584	and packets loss, might get closed quite violently with an error, when in	2088	and packets loss, might get closed quite violently with an error, when in
1585	fact, all data has been received.	2089	fact, all data has been received.
…		…
1601	$handle->on_drain (sub {	2105	$handle->on_drain (sub {
1602	warn "all data submitted to the kernel\n";	2106	warn "all data submitted to the kernel\n";
1603	undef $handle;	2107	undef $handle;
1604	});	2108	});
1605		2109
		2110	If you just want to queue some data and then signal EOF to the other side,
		2111	consider using C<< ->push_shutdown >> instead.
		2112
		2113	=item I want to contact a TLS/SSL server, I don't care about security.
		2114
		2115	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2116	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		2117	parameter:
		2118
		2119	tcp_connect $host, $port, sub {
		2120	my ($fh) = @_;
		2121
		2122	my $handle = new AnyEvent::Handle
		2123	fh => $fh,
		2124	tls => "connect",
		2125	on_error => sub { ... };
		2126
		2127	$handle->push_write (...);
		2128	};
		2129
		2130	=item I want to contact a TLS/SSL server, I do care about security.
		2131
		2132	Then you should additionally enable certificate verification, including
		2133	peername verification, if the protocol you use supports it (see
		2134	L<AnyEvent::TLS>, C<verify_peername>).
		2135
		2136	E.g. for HTTPS:
		2137
		2138	tcp_connect $host, $port, sub {
		2139	my ($fh) = @_;
		2140
		2141	my $handle = new AnyEvent::Handle
		2142	fh => $fh,
		2143	peername => $host,
		2144	tls => "connect",
		2145	tls_ctx => { verify => 1, verify_peername => "https" },
		2146	...
		2147
		2148	Note that you must specify the hostname you connected to (or whatever
		2149	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2150	peername verification will be done.
		2151
		2152	The above will use the system-dependent default set of trusted CA
		2153	certificates. If you want to check against a specific CA, add the
		2154	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2155
		2156	tls_ctx => {
		2157	verify => 1,
		2158	verify_peername => "https",
		2159	ca_file => "my-ca-cert.pem",
		2160	},
		2161
		2162	=item I want to create a TLS/SSL server, how do I do that?
		2163
		2164	Well, you first need to get a server certificate and key. You have
		2165	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2166	self-signed certificate (cheap. check the search engine of your choice,
		2167	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2168	nice program for that purpose).
		2169
		2170	Then create a file with your private key (in PEM format, see
		2171	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2172	file should then look like this:
		2173
		2174	-----BEGIN RSA PRIVATE KEY-----
		2175	...header data
		2176	... lots of base64'y-stuff
		2177	-----END RSA PRIVATE KEY-----
		2178
		2179	-----BEGIN CERTIFICATE-----
		2180	... lots of base64'y-stuff
		2181	-----END CERTIFICATE-----
		2182
		2183	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2184	specify this file as C<cert_file>:
		2185
		2186	tcp_server undef, $port, sub {
		2187	my ($fh) = @_;
		2188
		2189	my $handle = new AnyEvent::Handle
		2190	fh => $fh,
		2191	tls => "accept",
		2192	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2193	...
		2194
		2195	When you have intermediate CA certificates that your clients might not
		2196	know about, just append them to the C<cert_file>.
		2197
1606	=back	2198	=back
1607		2199
1608		2200
1609	=head1 SUBCLASSING AnyEvent::Handle	2201	=head1 SUBCLASSING AnyEvent::Handle
1610		2202

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines