ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.56 by root, Wed Jun 4 09:55:16 2008 UTC vs.
Revision 1.182 by root, Thu Sep 3 12:35:01 2009 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict;
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.12;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	warn "got error $msg\n";
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	);
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	filehandles.
52	on sockets see L<AnyEvent::Util>.	37
		38	The L<AnyEvent::Intro> tutorial contains some well-documented
		39	AnyEvent::Handle examples.
53		40
54	In the following, when the documentation refers to of "bytes" then this	41	In the following, when the documentation refers to of "bytes" then this
55	means characters. As sysread and syswrite are used for all I/O, their	42	means characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
57		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
		47
58	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
59	argument.	49	argument.
60		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
61	=head1 METHODS	65	=head1 METHODS
62		66
63	=over 4	67	=over 4
64		68
65	=item B<new (%args)>	69	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
66		70
67	The constructor supports these arguments (all as key => value pairs).	71	The constructor supports these arguments (all as C<< key => value >> pairs).
68		72
69	=over 4	73	=over 4
70		74
71	=item fh => $filehandle [MANDATORY]	75	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
72		76
73	The filehandle this L<AnyEvent::Handle> object will operate on.	77	The filehandle this L<AnyEvent::Handle> object will operate on.
74
75	NOTE: The filehandle will be set to non-blocking (using	78	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		80	that mode.
77		81
		82	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		83
		84	Try to connect to the specified host and service (port), using
		85	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		86	default C<peername>.
		87
		88	You have to specify either this parameter, or C<fh>, above.
		89
		90	It is possible to push requests on the read and write queues, and modify
		91	properties of the stream, even while AnyEvent::Handle is connecting.
		92
		93	When this parameter is specified, then the C<on_prepare>,
		94	C<on_connect_error> and C<on_connect> callbacks will be called under the
		95	appropriate circumstances:
		96
		97	=over 4
		98
78	=item on_eof => $cb->($handle)	99	=item on_prepare => $cb->($handle)
79		100
80	Set the callback to be called when an end-of-file condition is detcted,	101	This (rarely used) callback is called before a new connection is
81	i.e. in the case of a socket, when the other side has closed the	102	attempted, but after the file handle has been created. It could be used to
82	connection cleanly.	103	prepare the file handle with parameters required for the actual connect
		104	(as opposed to settings that can be changed when the connection is already
		105	established).
83		106
84	While not mandatory, it is highly recommended to set an eof callback,	107	The return value of this callback should be the connect timeout value in
85	otherwise you might end up with a closed socket while you are still	108	seconds (or C<0>, or C<undef>, or the empty list, to indicate the default
86	waiting for data.	109	timeout is to be used).
87		110
		111	=item on_connect => $cb->($handle, $host, $port, $retry->())
		112
		113	This callback is called when a connection has been successfully established.
		114
		115	The actual numeric host and port (the socket peername) are passed as
		116	parameters, together with a retry callback.
		117
		118	When, for some reason, the handle is not acceptable, then calling
		119	C<$retry> will continue with the next conenction target (in case of
		120	multi-homed hosts or SRV records there can be multiple connection
		121	endpoints). When it is called then the read and write queues, eof status,
		122	tls status and similar properties of the handle are being reset.
		123
		124	In most cases, ignoring the C<$retry> parameter is the way to go.
		125
		126	=item on_connect_error => $cb->($handle, $message)
		127
		128	This callback is called when the conenction could not be
		129	established. C<$!> will contain the relevant error code, and C<$message> a
		130	message describing it (usually the same as C<"$!">).
		131
		132	If this callback isn't specified, then C<on_error> will be called with a
		133	fatal error instead.
		134
		135	=back
		136
88	=item on_error => $cb->($handle, $fatal)	137	=item on_error => $cb->($handle, $fatal, $message)
89		138
90	This is the error callback, which is called when, well, some error	139	This is the error callback, which is called when, well, some error
91	occured, such as not being able to resolve the hostname, failure to	140	occured, such as not being able to resolve the hostname, failure to
92	connect or a read error.	141	connect or a read error.
93		142
94	Some errors are fatal (which is indicated by C<$fatal> being true). On	143	Some errors are fatal (which is indicated by C<$fatal> being true). On
95	fatal errors the handle object will be shut down and will not be	144	fatal errors the handle object will be destroyed (by a call to C<< ->
		145	destroy >>) after invoking the error callback (which means you are free to
		146	examine the handle object). Examples of fatal errors are an EOF condition
		147	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		148	cases where the other side can close the connection at their will it is
		149	often easiest to not report C<EPIPE> errors in this callback.
		150
		151	AnyEvent::Handle tries to find an appropriate error code for you to check
		152	against, but in some cases (TLS errors), this does not work well. It is
		153	recommended to always output the C<$message> argument in human-readable
		154	error messages (it's usually the same as C<"$!">).
		155
96	usable. Non-fatal errors can be retried by simply returning, but it is	156	Non-fatal errors can be retried by simply returning, but it is recommended
97	recommended to simply ignore this parameter and instead abondon the handle	157	to simply ignore this parameter and instead abondon the handle object
98	object when this callback is invoked.	158	when this callback is invoked. Examples of non-fatal errors are timeouts
		159	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
99		160
100	On callback entrance, the value of C<$!> contains the operating system	161	On callback entrance, the value of C<$!> contains the operating system
101	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	162	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		163	C<EPROTO>).
102		164
103	While not mandatory, it is I<highly> recommended to set this callback, as	165	While not mandatory, it is I<highly> recommended to set this callback, as
104	you will not be notified of errors otherwise. The default simply calls	166	you will not be notified of errors otherwise. The default simply calls
105	C<croak>.	167	C<croak>.
106		168
107	=item on_read => $cb->($handle)	169	=item on_read => $cb->($handle)
108		170
109	This sets the default read callback, which is called when data arrives	171	This sets the default read callback, which is called when data arrives
110	and no read request is in the queue.	172	and no read request is in the queue (unlike read queue callbacks, this
		173	callback will only be called when at least one octet of data is in the
		174	read buffer).
111		175
112	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	176	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
113	method or access the C<$handle->{rbuf}> member directly.	177	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		178	must not enlarge or modify the read buffer, you can only remove data at
		179	the beginning from it.
114		180
115	When an EOF condition is detected then AnyEvent::Handle will first try to	181	When an EOF condition is detected then AnyEvent::Handle will first try to
116	feed all the remaining data to the queued callbacks and C<on_read> before	182	feed all the remaining data to the queued callbacks and C<on_read> before
117	calling the C<on_eof> callback. If no progress can be made, then a fatal	183	calling the C<on_eof> callback. If no progress can be made, then a fatal
118	error will be raised (with C<$!> set to C<EPIPE>).	184	error will be raised (with C<$!> set to C<EPIPE>).
119		185
		186	Note that, unlike requests in the read queue, an C<on_read> callback
		187	doesn't mean you I<require> some data: if there is an EOF and there
		188	are outstanding read requests then an error will be flagged. With an
		189	C<on_read> callback, the C<on_eof> callback will be invoked.
		190
		191	=item on_eof => $cb->($handle)
		192
		193	Set the callback to be called when an end-of-file condition is detected,
		194	i.e. in the case of a socket, when the other side has closed the
		195	connection cleanly, and there are no outstanding read requests in the
		196	queue (if there are read requests, then an EOF counts as an unexpected
		197	connection close and will be flagged as an error).
		198
		199	For sockets, this just means that the other side has stopped sending data,
		200	you can still try to write data, and, in fact, one can return from the EOF
		201	callback and continue writing data, as only the read part has been shut
		202	down.
		203
		204	If an EOF condition has been detected but no C<on_eof> callback has been
		205	set, then a fatal error will be raised with C<$!> set to <0>.
		206
120	=item on_drain => $cb->($handle)	207	=item on_drain => $cb->($handle)
121		208
122	This sets the callback that is called when the write buffer becomes empty	209	This sets the callback that is called when the write buffer becomes empty
123	(or when the callback is set and the buffer is empty already).	210	(or when the callback is set and the buffer is empty already).
124		211
125	To append to the write buffer, use the C<< ->push_write >> method.	212	To append to the write buffer, use the C<< ->push_write >> method.
126		213
		214	This callback is useful when you don't want to put all of your write data
		215	into the queue at once, for example, when you want to write the contents
		216	of some file to the socket you might not want to read the whole file into
		217	memory and push it into the queue, but instead only read more data from
		218	the file when the write queue becomes empty.
		219
127	=item timeout => $fractional_seconds	220	=item timeout => $fractional_seconds
128		221
		222	=item rtimeout => $fractional_seconds
		223
		224	=item wtimeout => $fractional_seconds
		225
129	If non-zero, then this enables an "inactivity" timeout: whenever this many	226	If non-zero, then these enables an "inactivity" timeout: whenever this
130	seconds pass without a successful read or write on the underlying file	227	many seconds pass without a successful read or write on the underlying
131	handle, the C<on_timeout> callback will be invoked (and if that one is	228	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
132	missing, an C<ETIMEDOUT> error will be raised).	229	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		230	error will be raised).
		231
		232	There are three variants of the timeouts that work fully independent
		233	of each other, for both read and write, just read, and just write:
		234	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		235	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		236	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
133		237
134	Note that timeout processing is also active when you currently do not have	238	Note that timeout processing is also active when you currently do not have
135	any outstanding read or write requests: If you plan to keep the connection	239	any outstanding read or write requests: If you plan to keep the connection
136	idle then you should disable the timout temporarily or ignore the timeout	240	idle then you should disable the timout temporarily or ignore the timeout
137	in the C<on_timeout> callback.	241	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		242	restart the timeout.
138		243
139	Zero (the default) disables this timeout.	244	Zero (the default) disables this timeout.
140		245
141	=item on_timeout => $cb->($handle)	246	=item on_timeout => $cb->($handle)
142		247
…		…
146		251
147	=item rbuf_max => <bytes>	252	=item rbuf_max => <bytes>
148		253
149	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	254	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
150	when the read buffer ever (strictly) exceeds this size. This is useful to	255	when the read buffer ever (strictly) exceeds this size. This is useful to
151	avoid denial-of-service attacks.	256	avoid some forms of denial-of-service attacks.
152		257
153	For example, a server accepting connections from untrusted sources should	258	For example, a server accepting connections from untrusted sources should
154	be configured to accept only so-and-so much data that it cannot act on	259	be configured to accept only so-and-so much data that it cannot act on
155	(for example, when expecting a line, an attacker could send an unlimited	260	(for example, when expecting a line, an attacker could send an unlimited
156	amount of data without a callback ever being called as long as the line	261	amount of data without a callback ever being called as long as the line
157	isn't finished).	262	isn't finished).
158		263
		264	=item autocork => <boolean>
		265
		266	When disabled (the default), then C<push_write> will try to immediately
		267	write the data to the handle, if possible. This avoids having to register
		268	a write watcher and wait for the next event loop iteration, but can
		269	be inefficient if you write multiple small chunks (on the wire, this
		270	disadvantage is usually avoided by your kernel's nagle algorithm, see
		271	C<no_delay>, but this option can save costly syscalls).
		272
		273	When enabled, then writes will always be queued till the next event loop
		274	iteration. This is efficient when you do many small writes per iteration,
		275	but less efficient when you do a single write only per iteration (or when
		276	the write buffer often is full). It also increases write latency.
		277
		278	=item no_delay => <boolean>
		279
		280	When doing small writes on sockets, your operating system kernel might
		281	wait a bit for more data before actually sending it out. This is called
		282	the Nagle algorithm, and usually it is beneficial.
		283
		284	In some situations you want as low a delay as possible, which can be
		285	accomplishd by setting this option to a true value.
		286
		287	The default is your opertaing system's default behaviour (most likely
		288	enabled), this option explicitly enables or disables it, if possible.
		289
		290	=item keepalive => <boolean>
		291
		292	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		293	normally, TCP connections have no time-out once established, so TCP
		294	conenctions, once established, can stay alive forever even when the other
		295	side has long gone. TCP keepalives are a cheap way to take down long-lived
		296	TCP connections whent he other side becomes unreachable. While the default
		297	is OS-dependent, TCP keepalives usually kick in after around two hours,
		298	and, if the other side doesn't reply, take down the TCP connection some 10
		299	to 15 minutes later.
		300
		301	It is harmless to specify this option for file handles that do not support
		302	keepalives, and enabling it on connections that are potentially long-lived
		303	is usually a good idea.
		304
		305	=item oobinline => <boolean>
		306
		307	BSD majorly fucked up the implementation of TCP urgent data. The result
		308	is that almost no OS implements TCP according to the specs, and every OS
		309	implements it slightly differently.
		310
		311	If you want to handle TCP urgent data, then setting this flag gives you
		312	the most portable way of getting urgent data, by putting it into the
		313	stream.
		314
159	=item read_size => <bytes>	315	=item read_size => <bytes>
160		316
161	The default read block size (the amount of bytes this module will try to read	317	The default read block size (the amount of bytes this module will
162	during each (loop iteration). Default: C<8192>.	318	try to read during each loop iteration, which affects memory
		319	requirements). Default: C<8192>.
163		320
164	=item low_water_mark => <bytes>	321	=item low_water_mark => <bytes>
165		322
166	Sets the amount of bytes (default: C<0>) that make up an "empty" write	323	Sets the amount of bytes (default: C<0>) that make up an "empty" write
167	buffer: If the write reaches this size or gets even samller it is	324	buffer: If the write reaches this size or gets even samller it is
168	considered empty.	325	considered empty.
169		326
		327	Sometimes it can be beneficial (for performance reasons) to add data to
		328	the write buffer before it is fully drained, but this is a rare case, as
		329	the operating system kernel usually buffers data as well, so the default
		330	is good in almost all cases.
		331
		332	=item linger => <seconds>
		333
		334	If non-zero (default: C<3600>), then the destructor of the
		335	AnyEvent::Handle object will check whether there is still outstanding
		336	write data and will install a watcher that will write this data to the
		337	socket. No errors will be reported (this mostly matches how the operating
		338	system treats outstanding data at socket close time).
		339
		340	This will not work for partial TLS data that could not be encoded
		341	yet. This data will be lost. Calling the C<stoptls> method in time might
		342	help.
		343
		344	=item peername => $string
		345
		346	A string used to identify the remote site - usually the DNS hostname
		347	(I<not> IDN!) used to create the connection, rarely the IP address.
		348
		349	Apart from being useful in error messages, this string is also used in TLS
		350	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		351	verification will be skipped when C<peername> is not specified or
		352	C<undef>.
		353
170	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	354	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
171		355
172	When this parameter is given, it enables TLS (SSL) mode, that means it	356	When this parameter is given, it enables TLS (SSL) mode, that means
173	will start making tls handshake and will transparently encrypt/decrypt	357	AnyEvent will start a TLS handshake as soon as the conenction has been
174	data.	358	established and will transparently encrypt/decrypt data afterwards.
		359
		360	All TLS protocol errors will be signalled as C<EPROTO>, with an
		361	appropriate error message.
175		362
176	TLS mode requires Net::SSLeay to be installed (it will be loaded	363	TLS mode requires Net::SSLeay to be installed (it will be loaded
177	automatically when you try to create a TLS handle).	364	automatically when you try to create a TLS handle): this module doesn't
		365	have a dependency on that module, so if your module requires it, you have
		366	to add the dependency yourself.
178		367
179	For the TLS server side, use C<accept>, and for the TLS client side of a	368	Unlike TCP, TLS has a server and client side: for the TLS server side, use
180	connection, use C<connect> mode.	369	C<accept>, and for the TLS client side of a connection, use C<connect>
		370	mode.
181		371
182	You can also provide your own TLS connection object, but you have	372	You can also provide your own TLS connection object, but you have
183	to make sure that you call either C<Net::SSLeay::set_connect_state>	373	to make sure that you call either C<Net::SSLeay::set_connect_state>
184	or C<Net::SSLeay::set_accept_state> on it before you pass it to	374	or C<Net::SSLeay::set_accept_state> on it before you pass it to
185	AnyEvent::Handle.	375	AnyEvent::Handle. Also, this module will take ownership of this connection
		376	object.
186		377
		378	At some future point, AnyEvent::Handle might switch to another TLS
		379	implementation, then the option to use your own session object will go
		380	away.
		381
		382	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		383	passing in the wrong integer will lead to certain crash. This most often
		384	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		385	segmentation fault.
		386
187	See the C<starttls> method if you need to start TLs negotiation later.	387	See the C<< ->starttls >> method for when need to start TLS negotiation later.
188		388
189	=item tls_ctx => $ssl_ctx	389	=item tls_ctx => $anyevent_tls
190		390
191	Use the given Net::SSLeay::CTX object to create the new TLS connection	391	Use the given C<AnyEvent::TLS> object to create the new TLS connection
192	(unless a connection object was specified directly). If this parameter is	392	(unless a connection object was specified directly). If this parameter is
193	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	393	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
194		394
		395	Instead of an object, you can also specify a hash reference with C<< key
		396	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		397	new TLS context object.
		398
		399	=item on_starttls => $cb->($handle, $success[, $error_message])
		400
		401	This callback will be invoked when the TLS/SSL handshake has finished. If
		402	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		403	(C<on_stoptls> will not be called in this case).
		404
		405	The session in C<< $handle->{tls} >> can still be examined in this
		406	callback, even when the handshake was not successful.
		407
		408	TLS handshake failures will not cause C<on_error> to be invoked when this
		409	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		410
		411	Without this callback, handshake failures lead to C<on_error> being
		412	called, as normal.
		413
		414	Note that you cannot call C<starttls> right again in this callback. If you
		415	need to do that, start an zero-second timer instead whose callback can
		416	then call C<< ->starttls >> again.
		417
		418	=item on_stoptls => $cb->($handle)
		419
		420	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		421	set, then it will be invoked after freeing the TLS session. If it is not,
		422	then a TLS shutdown condition will be treated like a normal EOF condition
		423	on the handle.
		424
		425	The session in C<< $handle->{tls} >> can still be examined in this
		426	callback.
		427
		428	This callback will only be called on TLS shutdowns, not when the
		429	underlying handle signals EOF.
		430
195	=item json => JSON or JSON::XS object	431	=item json => JSON or JSON::XS object
196		432
197	This is the json coder object used by the C<json> read and write types.	433	This is the json coder object used by the C<json> read and write types.
198		434
199	If you don't supply it, then AnyEvent::Handle will create and use a	435	If you don't supply it, then AnyEvent::Handle will create and use a
200	suitable one, which will write and expect UTF-8 encoded JSON texts.	436	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		437	texts.
201		438
202	Note that you are responsible to depend on the JSON module if you want to	439	Note that you are responsible to depend on the JSON module if you want to
203	use this functionality, as AnyEvent does not have a dependency itself.	440	use this functionality, as AnyEvent does not have a dependency itself.
204		441
205	=item filter_r => $cb
206
207	=item filter_w => $cb
208
209	These exist, but are undocumented at this time.
210
211	=back	442	=back
212		443
213	=cut	444	=cut
214		445
215	sub new {	446	sub new {
216	my $class = shift;	447	my $class = shift;
217
218	my $self = bless { @_ }, $class;	448	my $self = bless { @_ }, $class;
219		449
220	$self->{fh} or Carp::croak "mandatory argument fh is missing";	450	if ($self->{fh}) {
		451	$self->_start;
		452	return unless $self->{fh}; # could be gone by now
		453
		454	} elsif ($self->{connect}) {
		455	require AnyEvent::Socket;
		456
		457	$self->{peername} = $self->{connect}[0]
		458	unless exists $self->{peername};
		459
		460	$self->{_skip_drain_rbuf} = 1;
		461
		462	{
		463	Scalar::Util::weaken (my $self = $self);
		464
		465	$self->{_connect} =
		466	AnyEvent::Socket::tcp_connect (
		467	$self->{connect}[0],
		468	$self->{connect}[1],
		469	sub {
		470	my ($fh, $host, $port, $retry) = @_;
		471
		472	if ($fh) {
		473	$self->{fh} = $fh;
		474
		475	delete $self->{_skip_drain_rbuf};
		476	$self->_start;
		477
		478	$self->{on_connect}
		479	and $self->{on_connect}($self, $host, $port, sub {
		480	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		481	$self->{_skip_drain_rbuf} = 1;
		482	&$retry;
		483	});
		484
		485	} else {
		486	if ($self->{on_connect_error}) {
		487	$self->{on_connect_error}($self, "$!");
		488	$self->destroy;
		489	} else {
		490	$self->_error ($!, 1);
		491	}
		492	}
		493	},
		494	sub {
		495	local $self->{fh} = $_[0];
		496
		497	$self->{on_prepare}
		498	? $self->{on_prepare}->($self)
		499	: ()
		500	}
		501	);
		502	}
		503
		504	} else {
		505	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		506	}
		507
		508	$self
		509	}
		510
		511	sub _start {
		512	my ($self) = @_;
221		513
222	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	514	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
223		515
224	if ($self->{tls}) {	516	$self->{_activity} =
225	require Net::SSLeay;	517	$self->{_ractivity} =
		518	$self->{_wactivity} = AE::now;
		519
		520	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		521	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		522	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		523
		524	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay};
		525	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive};
		526	$self->oobinline (delete $self->{oobinline}) if exists $self->{oobinline};
		527
226	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	528	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
227	}	529	if $self->{tls};
228		530
229	# $self->on_eof (delete $self->{on_eof} ) if $self->{on_eof}; # nop
230	# $self->on_error (delete $self->{on_error}) if $self->{on_error}; # nop
231	# $self->on_read (delete $self->{on_read} ) if $self->{on_read}; # nop
232	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	531	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
233		532
234	$self->{_activity} = AnyEvent->now;
235	$self->_timeout;
236
237	$self->start_read;	533	$self->start_read
		534	if $self->{on_read} || @{ $self->{_queue} };
238		535
239	$self	536	$self->_drain_wbuf;
240	}
241
242	sub _shutdown {
243	my ($self) = @_;
244
245	delete $self->{_tw};
246	delete $self->{_rw};
247	delete $self->{_ww};
248	delete $self->{fh};
249
250	$self->stoptls;
251	}	537	}
252		538
253	sub _error {	539	sub _error {
254	my ($self, $errno, $fatal) = @_;	540	my ($self, $errno, $fatal, $message) = @_;
255
256	$self->_shutdown
257	if $fatal;
258		541
259	$! = $errno;	542	$! = $errno;
		543	$message ||= "$!";
260		544
261	if ($self->{on_error}) {	545	if ($self->{on_error}) {
262	$self->{on_error}($self, $fatal);	546	$self->{on_error}($self, $fatal, $message);
263	} else {	547	$self->destroy if $fatal;
		548	} elsif ($self->{fh}) {
		549	$self->destroy;
264	Carp::croak "AnyEvent::Handle uncaught error: $!";	550	Carp::croak "AnyEvent::Handle uncaught error: $message";
265	}	551	}
266	}	552	}
267		553
268	=item $fh = $handle->fh	554	=item $fh = $handle->fh
269		555
270	This method returns the file handle of the L<AnyEvent::Handle> object.	556	This method returns the file handle used to create the L<AnyEvent::Handle> object.
271		557
272	=cut	558	=cut
273		559
274	sub fh { $_[0]{fh} }	560	sub fh { $_[0]{fh} }
275		561
…		…
293	$_[0]{on_eof} = $_[1];	579	$_[0]{on_eof} = $_[1];
294	}	580	}
295		581
296	=item $handle->on_timeout ($cb)	582	=item $handle->on_timeout ($cb)
297		583
298	Replace the current C<on_timeout> callback, or disables the callback	584	=item $handle->on_rtimeout ($cb)
299	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor
300	argument.
301		585
302	=cut	586	=item $handle->on_wtimeout ($cb)
303		587
304	sub on_timeout {	588	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
		589	callback, or disables the callback (but not the timeout) if C<$cb> =
		590	C<undef>. See the C<timeout> constructor argument and method.
		591
		592	=cut
		593
		594	# see below
		595
		596	=item $handle->autocork ($boolean)
		597
		598	Enables or disables the current autocork behaviour (see C<autocork>
		599	constructor argument). Changes will only take effect on the next write.
		600
		601	=cut
		602
		603	sub autocork {
		604	$_[0]{autocork} = $_[1];
		605	}
		606
		607	=item $handle->no_delay ($boolean)
		608
		609	Enables or disables the C<no_delay> setting (see constructor argument of
		610	the same name for details).
		611
		612	=cut
		613
		614	sub no_delay {
		615	$_[0]{no_delay} = $_[1];
		616
		617	eval {
		618	local $SIG{__DIE__};
		619	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		620	if $_[0]{fh};
		621	};
		622	}
		623
		624	=item $handle->keepalive ($boolean)
		625
		626	Enables or disables the C<keepalive> setting (see constructor argument of
		627	the same name for details).
		628
		629	=cut
		630
		631	sub keepalive {
		632	$_[0]{keepalive} = $_[1];
		633
		634	eval {
		635	local $SIG{__DIE__};
		636	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		637	if $_[0]{fh};
		638	};
		639	}
		640
		641	=item $handle->oobinline ($boolean)
		642
		643	Enables or disables the C<oobinline> setting (see constructor argument of
		644	the same name for details).
		645
		646	=cut
		647
		648	sub oobinline {
		649	$_[0]{oobinline} = $_[1];
		650
		651	eval {
		652	local $SIG{__DIE__};
		653	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		654	if $_[0]{fh};
		655	};
		656	}
		657
		658	=item $handle->keepalive ($boolean)
		659
		660	Enables or disables the C<keepalive> setting (see constructor argument of
		661	the same name for details).
		662
		663	=cut
		664
		665	sub keepalive {
		666	$_[0]{keepalive} = $_[1];
		667
		668	eval {
		669	local $SIG{__DIE__};
		670	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		671	if $_[0]{fh};
		672	};
		673	}
		674
		675	=item $handle->on_starttls ($cb)
		676
		677	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		678
		679	=cut
		680
		681	sub on_starttls {
		682	$_[0]{on_starttls} = $_[1];
		683	}
		684
		685	=item $handle->on_stoptls ($cb)
		686
		687	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		688
		689	=cut
		690
		691	sub on_starttls {
305	$_[0]{on_timeout} = $_[1];	692	$_[0]{on_stoptls} = $_[1];
		693	}
		694
		695	=item $handle->rbuf_max ($max_octets)
		696
		697	Configures the C<rbuf_max> setting (C<undef> disables it).
		698
		699	=cut
		700
		701	sub rbuf_max {
		702	$_[0]{rbuf_max} = $_[1];
306	}	703	}
307		704
308	#############################################################################	705	#############################################################################
309		706
310	=item $handle->timeout ($seconds)	707	=item $handle->timeout ($seconds)
311		708
		709	=item $handle->rtimeout ($seconds)
		710
		711	=item $handle->wtimeout ($seconds)
		712
312	Configures (or disables) the inactivity timeout.	713	Configures (or disables) the inactivity timeout.
313		714
314	=cut	715	=item $handle->timeout_reset
315		716
316	sub timeout {	717	=item $handle->rtimeout_reset
		718
		719	=item $handle->wtimeout_reset
		720
		721	Reset the activity timeout, as if data was received or sent.
		722
		723	These methods are cheap to call.
		724
		725	=cut
		726
		727	for my $dir ("", "r", "w") {
		728	my $timeout = "${dir}timeout";
		729	my $tw = "_${dir}tw";
		730	my $on_timeout = "on_${dir}timeout";
		731	my $activity = "_${dir}activity";
		732	my $cb;
		733
		734	*$on_timeout = sub {
		735	$_[0]{$on_timeout} = $_[1];
		736	};
		737
		738	*$timeout = sub {
317	my ($self, $timeout) = @_;	739	my ($self, $new_value) = @_;
318		740
319	$self->{timeout} = $timeout;	741	$self->{$timeout} = $new_value;
320	$self->_timeout;	742	delete $self->{$tw}; &$cb;
321	}	743	};
322		744
		745	*{"${dir}timeout_reset"} = sub {
		746	$_[0]{$activity} = AE::now;
		747	};
		748
		749	# main workhorse:
323	# reset the timeout watcher, as neccessary	750	# reset the timeout watcher, as neccessary
324	# also check for time-outs	751	# also check for time-outs
325	sub _timeout {	752	$cb = sub {
326	my ($self) = @_;	753	my ($self) = @_;
327		754
328	if ($self->{timeout}) {	755	if ($self->{$timeout} && $self->{fh}) {
329	my $NOW = AnyEvent->now;	756	my $NOW = AE::now;
330		757
331	# when would the timeout trigger?	758	# when would the timeout trigger?
332	my $after = $self->{_activity} + $self->{timeout} - $NOW;	759	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
333		760
334	# now or in the past already?	761	# now or in the past already?
335	if ($after <= 0) {	762	if ($after <= 0) {
336	$self->{_activity} = $NOW;	763	$self->{$activity} = $NOW;
337		764
338	if ($self->{on_timeout}) {	765	if ($self->{$on_timeout}) {
339	$self->{on_timeout}($self);	766	$self->{$on_timeout}($self);
340	} else {	767	} else {
341	$self->_error (&Errno::ETIMEDOUT);	768	$self->_error (Errno::ETIMEDOUT);
		769	}
		770
		771	# callback could have changed timeout value, optimise
		772	return unless $self->{$timeout};
		773
		774	# calculate new after
		775	$after = $self->{$timeout};
342	}	776	}
343		777
344	# callback could have changed timeout value, optimise	778	Scalar::Util::weaken $self;
345	return unless $self->{timeout};	779	return unless $self; # ->error could have destroyed $self
346		780
347	# calculate new after	781	$self->{$tw} ||= AE::timer $after, 0, sub {
348	$after = $self->{timeout};	782	delete $self->{$tw};
		783	$cb->($self);
		784	};
		785	} else {
		786	delete $self->{$tw};
349	}	787	}
350
351	Scalar::Util::weaken $self;
352	return unless $self; # ->error could have destroyed $self
353
354	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
355	delete $self->{_tw};
356	$self->_timeout;
357	});
358	} else {
359	delete $self->{_tw};
360	}	788	}
361	}	789	}
362		790
363	#############################################################################	791	#############################################################################
364		792
…		…
388	my ($self, $cb) = @_;	816	my ($self, $cb) = @_;
389		817
390	$self->{on_drain} = $cb;	818	$self->{on_drain} = $cb;
391		819
392	$cb->($self)	820	$cb->($self)
393	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	821	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
394	}	822	}
395		823
396	=item $handle->push_write ($data)	824	=item $handle->push_write ($data)
397		825
398	Queues the given scalar to be written. You can push as much data as you	826	Queues the given scalar to be written. You can push as much data as you
…		…
409	Scalar::Util::weaken $self;	837	Scalar::Util::weaken $self;
410		838
411	my $cb = sub {	839	my $cb = sub {
412	my $len = syswrite $self->{fh}, $self->{wbuf};	840	my $len = syswrite $self->{fh}, $self->{wbuf};
413		841
414	if ($len >= 0) {	842	if (defined $len) {
415	substr $self->{wbuf}, 0, $len, "";	843	substr $self->{wbuf}, 0, $len, "";
416		844
417	$self->{_activity} = AnyEvent->now;	845	$self->{_activity} = $self->{_wactivity} = AE::now;
418		846
419	$self->{on_drain}($self)	847	$self->{on_drain}($self)
420	if $self->{low_water_mark} >= length $self->{wbuf}	848	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
421	&& $self->{on_drain};	849	&& $self->{on_drain};
422		850
423	delete $self->{_ww} unless length $self->{wbuf};	851	delete $self->{_ww} unless length $self->{wbuf};
424	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	852	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
425	$self->_error ($!, 1);	853	$self->_error ($!, 1);
426	}	854	}
427	};	855	};
428		856
429	# try to write data immediately	857	# try to write data immediately
430	$cb->();	858	$cb->() unless $self->{autocork};
431		859
432	# if still data left in wbuf, we need to poll	860	# if still data left in wbuf, we need to poll
433	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	861	$self->{_ww} = AE::io $self->{fh}, 1, $cb
434	if length $self->{wbuf};	862	if length $self->{wbuf};
435	};	863	};
436	}	864	}
437		865
438	our %WH;	866	our %WH;
…		…
449		877
450	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	878	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
451	->($self, @_);	879	->($self, @_);
452	}	880	}
453		881
454	if ($self->{filter_w}) {	882	if ($self->{tls}) {
455	$self->{filter_w}($self, \$_[0]);	883	$self->{_tls_wbuf} .= $_[0];
		884	&_dotls ($self) if $self->{fh};
456	} else {	885	} else {
457	$self->{wbuf} .= $_[0];	886	$self->{wbuf} .= $_[0];
458	$self->_drain_wbuf;	887	$self->_drain_wbuf if $self->{fh};
459	}	888	}
460	}	889	}
461		890
462	=item $handle->push_write (type => @args)	891	=item $handle->push_write (type => @args)
463		892
…		…
477	=cut	906	=cut
478		907
479	register_write_type netstring => sub {	908	register_write_type netstring => sub {
480	my ($self, $string) = @_;	909	my ($self, $string) = @_;
481		910
482	sprintf "%d:%s,", (length $string), $string	911	(length $string) . ":$string,"
		912	};
		913
		914	=item packstring => $format, $data
		915
		916	An octet string prefixed with an encoded length. The encoding C<$format>
		917	uses the same format as a Perl C<pack> format, but must specify a single
		918	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		919	optional C<!>, C<< < >> or C<< > >> modifier).
		920
		921	=cut
		922
		923	register_write_type packstring => sub {
		924	my ($self, $format, $string) = @_;
		925
		926	pack "$format/a*", $string
483	};	927	};
484		928
485	=item json => $array_or_hashref	929	=item json => $array_or_hashref
486		930
487	Encodes the given hash or array reference into a JSON object. Unless you	931	Encodes the given hash or array reference into a JSON object. Unless you
…		…
512	Other languages could read single lines terminated by a newline and pass	956	Other languages could read single lines terminated by a newline and pass
513	this line into their JSON decoder of choice.	957	this line into their JSON decoder of choice.
514		958
515	=cut	959	=cut
516		960
		961	sub json_coder() {
		962	eval { require JSON::XS; JSON::XS->new->utf8 }
		963	|| do { require JSON; JSON->new->utf8 }
		964	}
		965
517	register_write_type json => sub {	966	register_write_type json => sub {
518	my ($self, $ref) = @_;	967	my ($self, $ref) = @_;
519		968
520	require JSON;	969	my $json = $self->{json} ||= json_coder;
521		970
522	$self->{json} ? $self->{json}->encode ($ref)	971	$json->encode ($ref)
523	: JSON::encode_json ($ref)
524	};	972	};
525		973
		974	=item storable => $reference
		975
		976	Freezes the given reference using L<Storable> and writes it to the
		977	handle. Uses the C<nfreeze> format.
		978
		979	=cut
		980
		981	register_write_type storable => sub {
		982	my ($self, $ref) = @_;
		983
		984	require Storable;
		985
		986	pack "w/a*", Storable::nfreeze ($ref)
		987	};
		988
526	=back	989	=back
		990
		991	=item $handle->push_shutdown
		992
		993	Sometimes you know you want to close the socket after writing your data
		994	before it was actually written. One way to do that is to replace your
		995	C<on_drain> handler by a callback that shuts down the socket (and set
		996	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		997	replaces the C<on_drain> callback with:
		998
		999	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		1000
		1001	This simply shuts down the write side and signals an EOF condition to the
		1002	the peer.
		1003
		1004	You can rely on the normal read queue and C<on_eof> handling
		1005	afterwards. This is the cleanest way to close a connection.
		1006
		1007	=cut
		1008
		1009	sub push_shutdown {
		1010	my ($self) = @_;
		1011
		1012	delete $self->{low_water_mark};
		1013	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1014	}
527		1015
528	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1016	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
529		1017
530	This function (not method) lets you add your own types to C<push_write>.	1018	This function (not method) lets you add your own types to C<push_write>.
531	Whenever the given C<type> is used, C<push_write> will invoke the code	1019	Whenever the given C<type> is used, C<push_write> will invoke the code
…		…
552	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1040	ways, the "simple" way, using only C<on_read> and the "complex" way, using
553	a queue.	1041	a queue.
554		1042
555	In the simple case, you just install an C<on_read> callback and whenever	1043	In the simple case, you just install an C<on_read> callback and whenever
556	new data arrives, it will be called. You can then remove some data (if	1044	new data arrives, it will be called. You can then remove some data (if
557	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	1045	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna
558	or not.	1046	leave the data there if you want to accumulate more (e.g. when only a
		1047	partial message has been received so far).
559		1048
560	In the more complex case, you want to queue multiple callbacks. In this	1049	In the more complex case, you want to queue multiple callbacks. In this
561	case, AnyEvent::Handle will call the first queued callback each time new	1050	case, AnyEvent::Handle will call the first queued callback each time new
562	data arrives and removes it when it has done its job (see C<push_read>,	1051	data arrives (also the first time it is queued) and removes it when it has
563	below).	1052	done its job (see C<push_read>, below).
564		1053
565	This way you can, for example, push three line-reads, followed by reading	1054	This way you can, for example, push three line-reads, followed by reading
566	a chunk of data, and AnyEvent::Handle will execute them in order.	1055	a chunk of data, and AnyEvent::Handle will execute them in order.
567		1056
568	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by	1057	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by
…		…
581	# handle xml	1070	# handle xml
582	});	1071	});
583	});	1072	});
584	});	1073	});
585		1074
586	Example 2: Implement a client for a protocol that replies either with	1075	Example 2: Implement a client for a protocol that replies either with "OK"
587	"OK" and another line or "ERROR" for one request, and 64 bytes for the	1076	and another line or "ERROR" for the first request that is sent, and 64
588	second request. Due tot he availability of a full queue, we can just	1077	bytes for the second request. Due to the availability of a queue, we can
589	pipeline sending both requests and manipulate the queue as necessary in	1078	just pipeline sending both requests and manipulate the queue as necessary
590	the callbacks:	1079	in the callbacks.
591		1080
592	# request one	1081	When the first callback is called and sees an "OK" response, it will
		1082	C<unshift> another line-read. This line-read will be queued I<before> the
		1083	64-byte chunk callback.
		1084
		1085	# request one, returns either "OK + extra line" or "ERROR"
593	$handle->push_write ("request 1\015\012");	1086	$handle->push_write ("request 1\015\012");
594		1087
595	# we expect "ERROR" or "OK" as response, so push a line read	1088	# we expect "ERROR" or "OK" as response, so push a line read
596	$handle->push_read (line => sub {	1089	$handle->push_read (line => sub {
597	# if we got an "OK", we have to _prepend_ another line,	1090	# if we got an "OK", we have to _prepend_ another line,
…		…
604	...	1097	...
605	});	1098	});
606	}	1099	}
607	});	1100	});
608		1101
609	# request two	1102	# request two, simply returns 64 octets
610	$handle->push_write ("request 2\015\012");	1103	$handle->push_write ("request 2\015\012");
611		1104
612	# simply read 64 bytes, always	1105	# simply read 64 bytes, always
613	$handle->push_read (chunk => 64, sub {	1106	$handle->push_read (chunk => 64, sub {
614	my $response = $_[1];	1107	my $response = $_[1];
…		…
620	=cut	1113	=cut
621		1114
622	sub _drain_rbuf {	1115	sub _drain_rbuf {
623	my ($self) = @_;	1116	my ($self) = @_;
624		1117
625	if (	1118	# avoid recursion
626	defined $self->{rbuf_max}
627	&& $self->{rbuf_max} < length $self->{rbuf}
628	) {
629	return $self->_error (&Errno::ENOSPC, 1);
630	}
631
632	return if $self->{in_drain};	1119	return if $self->{_skip_drain_rbuf};
633	local $self->{in_drain} = 1;	1120	local $self->{_skip_drain_rbuf} = 1;
634		1121
		1122	while () {
		1123	# we need to use a separate tls read buffer, as we must not receive data while
		1124	# we are draining the buffer, and this can only happen with TLS.
		1125	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1126	if exists $self->{_tls_rbuf};
		1127
635	while (my $len = length $self->{rbuf}) {	1128	my $len = length $self->{rbuf};
636	no strict 'refs';	1129
637	if (my $cb = shift @{ $self->{_queue} }) {	1130	if (my $cb = shift @{ $self->{_queue} }) {
638	unless ($cb->($self)) {	1131	unless ($cb->($self)) {
		1132	# no progress can be made
		1133	# (not enough data and no data forthcoming)
		1134	$self->_error (Errno::EPIPE, 1), return
639	if ($self->{_eof}) {	1135	if $self->{_eof};
640	# no progress can be made (not enough data and no data forthcoming)
641	return $self->_error (&Errno::EPIPE, 1);
642	}
643		1136
644	unshift @{ $self->{_queue} }, $cb;	1137	unshift @{ $self->{_queue} }, $cb;
645	last;	1138	last;
646	}	1139	}
647	} elsif ($self->{on_read}) {	1140	} elsif ($self->{on_read}) {
		1141	last unless $len;
		1142
648	$self->{on_read}($self);	1143	$self->{on_read}($self);
649		1144
650	if (	1145	if (
651	$len == length $self->{rbuf} # if no data has been consumed	1146	$len == length $self->{rbuf} # if no data has been consumed
652	&& !@{ $self->{_queue} } # and the queue is still empty	1147	&& !@{ $self->{_queue} } # and the queue is still empty
653	&& $self->{on_read} # but we still have on_read	1148	&& $self->{on_read} # but we still have on_read
654	) {	1149	) {
655	# no further data will arrive	1150	# no further data will arrive
656	# so no progress can be made	1151	# so no progress can be made
657	return $self->_error (&Errno::EPIPE, 1)	1152	$self->_error (Errno::EPIPE, 1), return
658	if $self->{_eof};	1153	if $self->{_eof};
659		1154
660	last; # more data might arrive	1155	last; # more data might arrive
661	}	1156	}
662	} else {	1157	} else {
663	# read side becomes idle	1158	# read side becomes idle
664	delete $self->{_rw};	1159	delete $self->{_rw} unless $self->{tls};
665	last;	1160	last;
666	}	1161	}
667	}	1162	}
668		1163
		1164	if ($self->{_eof}) {
		1165	$self->{on_eof}
669	$self->{on_eof}($self)	1166	? $self->{on_eof}($self)
670	if $self->{_eof} && $self->{on_eof};	1167	: $self->_error (0, 1, "Unexpected end-of-file");
		1168
		1169	return;
		1170	}
		1171
		1172	if (
		1173	defined $self->{rbuf_max}
		1174	&& $self->{rbuf_max} < length $self->{rbuf}
		1175	) {
		1176	$self->_error (Errno::ENOSPC, 1), return;
		1177	}
671		1178
672	# may need to restart read watcher	1179	# may need to restart read watcher
673	unless ($self->{_rw}) {	1180	unless ($self->{_rw}) {
674	$self->start_read	1181	$self->start_read
675	if $self->{on_read} || @{ $self->{_queue} };	1182	if $self->{on_read} || @{ $self->{_queue} };
…		…
686		1193
687	sub on_read {	1194	sub on_read {
688	my ($self, $cb) = @_;	1195	my ($self, $cb) = @_;
689		1196
690	$self->{on_read} = $cb;	1197	$self->{on_read} = $cb;
		1198	$self->_drain_rbuf if $cb;
691	}	1199	}
692		1200
693	=item $handle->rbuf	1201	=item $handle->rbuf
694		1202
695	Returns the read buffer (as a modifiable lvalue).	1203	Returns the read buffer (as a modifiable lvalue).
696		1204
697	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1205	You can access the read buffer directly as the C<< ->{rbuf} >>
698	you want.	1206	member, if you want. However, the only operation allowed on the
		1207	read buffer (apart from looking at it) is removing data from its
		1208	beginning. Otherwise modifying or appending to it is not allowed and will
		1209	lead to hard-to-track-down bugs.
699		1210
700	NOTE: The read buffer should only be used or modified if the C<on_read>,	1211	NOTE: The read buffer should only be used or modified if the C<on_read>,
701	C<push_read> or C<unshift_read> methods are used. The other read methods	1212	C<push_read> or C<unshift_read> methods are used. The other read methods
702	automatically manage the read buffer.	1213	automatically manage the read buffer.
703		1214
…		…
757	my $type = shift;	1268	my $type = shift;
758		1269
759	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1270	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
760	->($self, $cb, @_);	1271	->($self, $cb, @_);
761	}	1272	}
762
763		1273
764	unshift @{ $self->{_queue} }, $cb;	1274	unshift @{ $self->{_queue} }, $cb;
765	$self->_drain_rbuf;	1275	$self->_drain_rbuf;
766	}	1276	}
767		1277
…		…
800	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	1310	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
801	1	1311	1
802	}	1312	}
803	};	1313	};
804		1314
805	# compatibility with older API
806	sub push_read_chunk {
807	$_[0]->push_read (chunk => $_[1], $_[2]);
808	}
809
810	sub unshift_read_chunk {
811	$_[0]->unshift_read (chunk => $_[1], $_[2]);
812	}
813
814	=item line => [$eol, ]$cb->($handle, $line, $eol)	1315	=item line => [$eol, ]$cb->($handle, $line, $eol)
815		1316
816	The callback will be called only once a full line (including the end of	1317	The callback will be called only once a full line (including the end of
817	line marker, C<$eol>) has been read. This line (excluding the end of line	1318	line marker, C<$eol>) has been read. This line (excluding the end of line
818	marker) will be passed to the callback as second argument (C<$line>), and	1319	marker) will be passed to the callback as second argument (C<$line>), and
…		…
833	=cut	1334	=cut
834		1335
835	register_read_type line => sub {	1336	register_read_type line => sub {
836	my ($self, $cb, $eol) = @_;	1337	my ($self, $cb, $eol) = @_;
837		1338
838	$eol = qr|(\015?\012)| if @_ < 3;	1339	if (@_ < 3) {
839	$eol = quotemeta $eol unless ref $eol;	1340	# this is more than twice as fast as the generic code below
840	$eol = qr|^(.*?)($eol)|s;
841
842	sub {	1341	sub {
843	$_[0]{rbuf} =~ s/$eol// or return;	1342	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
844		1343
845	$cb->($_[0], $1, $2);	1344	$cb->($_[0], $1, $2);
846	1
847	}
848	};
849
850	# compatibility with older API
851	sub push_read_line {
852	my $self = shift;
853	$self->push_read (line => @_);
854	}
855
856	sub unshift_read_line {
857	my $self = shift;
858	$self->unshift_read (line => @_);
859	}
860
861	=item netstring => $cb->($handle, $string)
862
863	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
864
865	Throws an error with C<$!> set to EBADMSG on format violations.
866
867	=cut
868
869	register_read_type netstring => sub {
870	my ($self, $cb) = @_;
871
872	sub {
873	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
874	if ($_[0]{rbuf} =~ /[^0-9]/) {
875	$self->_error (&Errno::EBADMSG);
876	}	1345	1
877	return;
878	}	1346	}
		1347	} else {
		1348	$eol = quotemeta $eol unless ref $eol;
		1349	$eol = qr|^(.*?)($eol)|s;
879		1350
880	my $len = $1;	1351	sub {
		1352	$_[0]{rbuf} =~ s/$eol// or return;
881		1353
882	$self->unshift_read (chunk => $len, sub {	1354	$cb->($_[0], $1, $2);
883	my $string = $_[1];
884	$_[0]->unshift_read (chunk => 1, sub {
885	if ($_[1] eq ",") {
886	$cb->($_[0], $string);
887	} else {
888	$self->_error (&Errno::EBADMSG);
889	}
890	});	1355	1
891	});	1356	}
892
893	1
894	}	1357	}
895	};	1358	};
896		1359
897	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)	1360	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
898		1361
…		…
950	return 1;	1413	return 1;
951	}	1414	}
952		1415
953	# reject	1416	# reject
954	if ($reject && $$rbuf =~ $reject) {	1417	if ($reject && $$rbuf =~ $reject) {
955	$self->_error (&Errno::EBADMSG);	1418	$self->_error (Errno::EBADMSG);
956	}	1419	}
957		1420
958	# skip	1421	# skip
959	if ($skip && $$rbuf =~ $skip) {	1422	if ($skip && $$rbuf =~ $skip) {
960	$data .= substr $$rbuf, 0, $+[0], "";	1423	$data .= substr $$rbuf, 0, $+[0], "";
…		…
962		1425
963	()	1426	()
964	}	1427	}
965	};	1428	};
966		1429
		1430	=item netstring => $cb->($handle, $string)
		1431
		1432	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
		1433
		1434	Throws an error with C<$!> set to EBADMSG on format violations.
		1435
		1436	=cut
		1437
		1438	register_read_type netstring => sub {
		1439	my ($self, $cb) = @_;
		1440
		1441	sub {
		1442	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
		1443	if ($_[0]{rbuf} =~ /[^0-9]/) {
		1444	$self->_error (Errno::EBADMSG);
		1445	}
		1446	return;
		1447	}
		1448
		1449	my $len = $1;
		1450
		1451	$self->unshift_read (chunk => $len, sub {
		1452	my $string = $_[1];
		1453	$_[0]->unshift_read (chunk => 1, sub {
		1454	if ($_[1] eq ",") {
		1455	$cb->($_[0], $string);
		1456	} else {
		1457	$self->_error (Errno::EBADMSG);
		1458	}
		1459	});
		1460	});
		1461
		1462	1
		1463	}
		1464	};
		1465
		1466	=item packstring => $format, $cb->($handle, $string)
		1467
		1468	An octet string prefixed with an encoded length. The encoding C<$format>
		1469	uses the same format as a Perl C<pack> format, but must specify a single
		1470	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		1471	optional C<!>, C<< < >> or C<< > >> modifier).
		1472
		1473	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1474	EPP uses a prefix of C<N> (4 octtes).
		1475
		1476	Example: read a block of data prefixed by its length in BER-encoded
		1477	format (very efficient).
		1478
		1479	$handle->push_read (packstring => "w", sub {
		1480	my ($handle, $data) = @_;
		1481	});
		1482
		1483	=cut
		1484
		1485	register_read_type packstring => sub {
		1486	my ($self, $cb, $format) = @_;
		1487
		1488	sub {
		1489	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1490	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
		1491	or return;
		1492
		1493	$format = length pack $format, $len;
		1494
		1495	# bypass unshift if we already have the remaining chunk
		1496	if ($format + $len <= length $_[0]{rbuf}) {
		1497	my $data = substr $_[0]{rbuf}, $format, $len;
		1498	substr $_[0]{rbuf}, 0, $format + $len, "";
		1499	$cb->($_[0], $data);
		1500	} else {
		1501	# remove prefix
		1502	substr $_[0]{rbuf}, 0, $format, "";
		1503
		1504	# read remaining chunk
		1505	$_[0]->unshift_read (chunk => $len, $cb);
		1506	}
		1507
		1508	1
		1509	}
		1510	};
		1511
967	=item json => $cb->($handle, $hash_or_arrayref)	1512	=item json => $cb->($handle, $hash_or_arrayref)
968		1513
969	Reads a JSON object or array, decodes it and passes it to the callback.	1514	Reads a JSON object or array, decodes it and passes it to the
		1515	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
970		1516
971	If a C<json> object was passed to the constructor, then that will be used	1517	If a C<json> object was passed to the constructor, then that will be used
972	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1518	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
973		1519
974	This read type uses the incremental parser available with JSON version	1520	This read type uses the incremental parser available with JSON version
…		…
981	the C<json> write type description, above, for an actual example.	1527	the C<json> write type description, above, for an actual example.
982		1528
983	=cut	1529	=cut
984		1530
985	register_read_type json => sub {	1531	register_read_type json => sub {
986	my ($self, $cb, $accept, $reject, $skip) = @_;	1532	my ($self, $cb) = @_;
987		1533
988	require JSON;	1534	my $json = $self->{json} ||= json_coder;
989		1535
990	my $data;	1536	my $data;
991	my $rbuf = \$self->{rbuf};	1537	my $rbuf = \$self->{rbuf};
992		1538
993	my $json = $self->{json} ||= JSON->new->utf8;
994
995	sub {	1539	sub {
996	my $ref = $json->incr_parse ($self->{rbuf});	1540	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
997		1541
998	if ($ref) {	1542	if ($ref) {
999	$self->{rbuf} = $json->incr_text;	1543	$self->{rbuf} = $json->incr_text;
1000	$json->incr_text = "";	1544	$json->incr_text = "";
1001	$cb->($self, $ref);	1545	$cb->($self, $ref);
1002		1546
1003	1	1547	1
		1548	} elsif ($@) {
		1549	# error case
		1550	$json->incr_skip;
		1551
		1552	$self->{rbuf} = $json->incr_text;
		1553	$json->incr_text = "";
		1554
		1555	$self->_error (Errno::EBADMSG);
		1556
		1557	()
1004	} else {	1558	} else {
1005	$self->{rbuf} = "";	1559	$self->{rbuf} = "";
		1560
1006	()	1561	()
1007	}	1562	}
		1563	}
		1564	};
		1565
		1566	=item storable => $cb->($handle, $ref)
		1567
		1568	Deserialises a L<Storable> frozen representation as written by the
		1569	C<storable> write type (BER-encoded length prefix followed by nfreeze'd
		1570	data).
		1571
		1572	Raises C<EBADMSG> error if the data could not be decoded.
		1573
		1574	=cut
		1575
		1576	register_read_type storable => sub {
		1577	my ($self, $cb) = @_;
		1578
		1579	require Storable;
		1580
		1581	sub {
		1582	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1583	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
		1584	or return;
		1585
		1586	my $format = length pack "w", $len;
		1587
		1588	# bypass unshift if we already have the remaining chunk
		1589	if ($format + $len <= length $_[0]{rbuf}) {
		1590	my $data = substr $_[0]{rbuf}, $format, $len;
		1591	substr $_[0]{rbuf}, 0, $format + $len, "";
		1592	$cb->($_[0], Storable::thaw ($data));
		1593	} else {
		1594	# remove prefix
		1595	substr $_[0]{rbuf}, 0, $format, "";
		1596
		1597	# read remaining chunk
		1598	$_[0]->unshift_read (chunk => $len, sub {
		1599	if (my $ref = eval { Storable::thaw ($_[1]) }) {
		1600	$cb->($_[0], $ref);
		1601	} else {
		1602	$self->_error (Errno::EBADMSG);
		1603	}
		1604	});
		1605	}
		1606
		1607	1
1008	}	1608	}
1009	};	1609	};
1010		1610
1011	=back	1611	=back
1012		1612
…		…
1033	=item $handle->stop_read	1633	=item $handle->stop_read
1034		1634
1035	=item $handle->start_read	1635	=item $handle->start_read
1036		1636
1037	In rare cases you actually do not want to read anything from the	1637	In rare cases you actually do not want to read anything from the
1038	socket. In this case you can call C<stop_read>. Neither C<on_read> no	1638	socket. In this case you can call C<stop_read>. Neither C<on_read> nor
1039	any queued callbacks will be executed then. To start reading again, call	1639	any queued callbacks will be executed then. To start reading again, call
1040	C<start_read>.	1640	C<start_read>.
1041		1641
1042	Note that AnyEvent::Handle will automatically C<start_read> for you when	1642	Note that AnyEvent::Handle will automatically C<start_read> for you when
1043	you change the C<on_read> callback or push/unshift a read callback, and it	1643	you change the C<on_read> callback or push/unshift a read callback, and it
1044	will automatically C<stop_read> for you when neither C<on_read> is set nor	1644	will automatically C<stop_read> for you when neither C<on_read> is set nor
1045	there are any read requests in the queue.	1645	there are any read requests in the queue.
1046		1646
		1647	These methods will have no effect when in TLS mode (as TLS doesn't support
		1648	half-duplex connections).
		1649
1047	=cut	1650	=cut
1048		1651
1049	sub stop_read {	1652	sub stop_read {
1050	my ($self) = @_;	1653	my ($self) = @_;
1051		1654
1052	delete $self->{_rw};	1655	delete $self->{_rw} unless $self->{tls};
1053	}	1656	}
1054		1657
1055	sub start_read {	1658	sub start_read {
1056	my ($self) = @_;	1659	my ($self) = @_;
1057		1660
1058	unless ($self->{_rw} || $self->{_eof}) {	1661	unless ($self->{_rw} || $self->{_eof}) {
1059	Scalar::Util::weaken $self;	1662	Scalar::Util::weaken $self;
1060		1663
1061	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1664	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1062	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1665	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1063	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1666	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
1064		1667
1065	if ($len > 0) {	1668	if ($len > 0) {
1066	$self->{_activity} = AnyEvent->now;	1669	$self->{_activity} = $self->{_ractivity} = AE::now;
1067		1670
1068	$self->{filter_r}	1671	if ($self->{tls}) {
1069	? $self->{filter_r}($self, $rbuf)	1672	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
		1673
		1674	&_dotls ($self);
		1675	} else {
1070	: $self->_drain_rbuf;	1676	$self->_drain_rbuf;
		1677	}
1071		1678
1072	} elsif (defined $len) {	1679	} elsif (defined $len) {
1073	delete $self->{_rw};	1680	delete $self->{_rw};
1074	$self->{_eof} = 1;	1681	$self->{_eof} = 1;
1075	$self->_drain_rbuf;	1682	$self->_drain_rbuf;
1076		1683
1077	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1684	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1078	return $self->_error ($!, 1);	1685	return $self->_error ($!, 1);
1079	}	1686	}
1080	});	1687	};
1081	}	1688	}
1082	}	1689	}
1083		1690
		1691	our $ERROR_SYSCALL;
		1692	our $ERROR_WANT_READ;
		1693
		1694	sub _tls_error {
		1695	my ($self, $err) = @_;
		1696
		1697	return $self->_error ($!, 1)
		1698	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1699
		1700	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1701
		1702	# reduce error string to look less scary
		1703	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1704
		1705	if ($self->{_on_starttls}) {
		1706	(delete $self->{_on_starttls})->($self, undef, $err);
		1707	&_freetls;
		1708	} else {
		1709	&_freetls;
		1710	$self->_error (Errno::EPROTO, 1, $err);
		1711	}
		1712	}
		1713
		1714	# poll the write BIO and send the data if applicable
		1715	# also decode read data if possible
		1716	# this is basiclaly our TLS state machine
		1717	# more efficient implementations are possible with openssl,
		1718	# but not with the buggy and incomplete Net::SSLeay.
1084	sub _dotls {	1719	sub _dotls {
1085	my ($self) = @_;	1720	my ($self) = @_;
1086		1721
1087	my $buf;	1722	my $tmp;
1088		1723
1089	if (length $self->{_tls_wbuf}) {	1724	if (length $self->{_tls_wbuf}) {
1090	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1725	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1091	substr $self->{_tls_wbuf}, 0, $len, "";	1726	substr $self->{_tls_wbuf}, 0, $tmp, "";
1092	}	1727	}
1093	}
1094		1728
		1729	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1730	return $self->_tls_error ($tmp)
		1731	if $tmp != $ERROR_WANT_READ
		1732	&& ($tmp != $ERROR_SYSCALL || $!);
		1733	}
		1734
		1735	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1736	unless (length $tmp) {
		1737	$self->{_on_starttls}
		1738	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		1739	&_freetls;
		1740
		1741	if ($self->{on_stoptls}) {
		1742	$self->{on_stoptls}($self);
		1743	return;
		1744	} else {
		1745	# let's treat SSL-eof as we treat normal EOF
		1746	delete $self->{_rw};
		1747	$self->{_eof} = 1;
		1748	}
		1749	}
		1750
		1751	$self->{_tls_rbuf} .= $tmp;
		1752	$self->_drain_rbuf;
		1753	$self->{tls} or return; # tls session might have gone away in callback
		1754	}
		1755
		1756	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
		1757	return $self->_tls_error ($tmp)
		1758	if $tmp != $ERROR_WANT_READ
		1759	&& ($tmp != $ERROR_SYSCALL || $!);
		1760
1095	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1761	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1096	$self->{wbuf} .= $buf;	1762	$self->{wbuf} .= $tmp;
1097	$self->_drain_wbuf;	1763	$self->_drain_wbuf;
1098	}	1764	}
1099		1765
1100	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	1766	$self->{_on_starttls}
1101	if (length $buf) {	1767	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1102	$self->{rbuf} .= $buf;	1768	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1103	$self->_drain_rbuf;
1104	} else {
1105	# let's treat SSL-eof as we treat normal EOF
1106	$self->{_eof} = 1;
1107	$self->_shutdown;
1108	return;
1109	}
1110	}
1111
1112	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
1113
1114	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1115	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1116	return $self->_error ($!, 1);
1117	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
1118	return $self->_error (&Errno::EIO, 1);
1119	}
1120
1121	# all others are fine for our purposes
1122	}
1123	}	1769	}
1124		1770
1125	=item $handle->starttls ($tls[, $tls_ctx])	1771	=item $handle->starttls ($tls[, $tls_ctx])
1126		1772
1127	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1773	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1128	object is created, you can also do that at a later time by calling	1774	object is created, you can also do that at a later time by calling
1129	C<starttls>.	1775	C<starttls>.
1130		1776
		1777	Starting TLS is currently an asynchronous operation - when you push some
		1778	write data and then call C<< ->starttls >> then TLS negotiation will start
		1779	immediately, after which the queued write data is then sent.
		1780
1131	The first argument is the same as the C<tls> constructor argument (either	1781	The first argument is the same as the C<tls> constructor argument (either
1132	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1782	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1133		1783
1134	The second argument is the optional C<Net::SSLeay::CTX> object that is	1784	The second argument is the optional C<AnyEvent::TLS> object that is used
1135	used when AnyEvent::Handle has to create its own TLS connection object.	1785	when AnyEvent::Handle has to create its own TLS connection object, or
		1786	a hash reference with C<< key => value >> pairs that will be used to
		1787	construct a new context.
1136		1788
1137	The TLS connection object will end up in C<< $handle->{tls} >> after this	1789	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1138	call and can be used or changed to your liking. Note that the handshake	1790	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1139	might have already started when this function returns.	1791	changed to your liking. Note that the handshake might have already started
		1792	when this function returns.
1140		1793
		1794	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		1795	handshakes on the same stream. Best do not attempt to use the stream after
		1796	stopping TLS.
		1797
1141	=cut	1798	=cut
		1799
		1800	our %TLS_CACHE; #TODO not yet documented, should we?
1142		1801
1143	sub starttls {	1802	sub starttls {
1144	my ($self, $ssl, $ctx) = @_;	1803	my ($self, $tls, $ctx) = @_;
1145		1804
1146	$self->stoptls;	1805	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1806	if $self->{tls};
1147		1807
1148	if ($ssl eq "accept") {	1808	$self->{tls} = $tls;
1149	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1809	$self->{tls_ctx} = $ctx if @_ > 2;
1150	Net::SSLeay::set_accept_state ($ssl);	1810
1151	} elsif ($ssl eq "connect") {	1811	return unless $self->{fh};
1152	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1812
1153	Net::SSLeay::set_connect_state ($ssl);	1813	require Net::SSLeay;
		1814
		1815	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		1816	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1817
		1818	$tls = delete $self->{tls};
		1819	$ctx = $self->{tls_ctx};
		1820
		1821	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1822
		1823	if ("HASH" eq ref $ctx) {
		1824	require AnyEvent::TLS;
		1825
		1826	if ($ctx->{cache}) {
		1827	my $key = $ctx+0;
		1828	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1829	} else {
		1830	$ctx = new AnyEvent::TLS %$ctx;
		1831	}
		1832	}
1154	}	1833
1155		1834	$self->{tls_ctx} = $ctx || TLS_CTX ();
1156	$self->{tls} = $ssl;	1835	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1157		1836
1158	# basically, this is deep magic (because SSL_read should have the same issues)	1837	# basically, this is deep magic (because SSL_read should have the same issues)
1159	# but the openssl maintainers basically said: "trust us, it just works".	1838	# but the openssl maintainers basically said: "trust us, it just works".
1160	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1839	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1161	# and mismaintained ssleay-module doesn't even offer them).	1840	# and mismaintained ssleay-module doesn't even offer them).
1162	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1841	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1842	#
		1843	# in short: this is a mess.
		1844	#
		1845	# note that we do not try to keep the length constant between writes as we are required to do.
		1846	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1847	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1848	# have identity issues in that area.
1163	Net::SSLeay::CTX_set_mode ($self->{tls},	1849	# Net::SSLeay::CTX_set_mode ($ssl,
1164	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1850	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1165	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1851	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1852	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1166		1853
1167	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1854	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1168	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1855	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1169		1856
		1857	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1858
1170	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1859	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1171		1860
1172	$self->{filter_w} = sub {	1861	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1173	$_[0]{_tls_wbuf} .= ${$_[1]};	1862	if $self->{on_starttls};
1174	&_dotls;	1863
1175	};	1864	&_dotls; # need to trigger the initial handshake
1176	$self->{filter_r} = sub {	1865	$self->start_read; # make sure we actually do read
1177	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1178	&_dotls;
1179	};
1180	}	1866	}
1181		1867
1182	=item $handle->stoptls	1868	=item $handle->stoptls
1183		1869
1184	Destroys the SSL connection, if any. Partial read or write data will be	1870	Shuts down the SSL connection - this makes a proper EOF handshake by
1185	lost.	1871	sending a close notify to the other side, but since OpenSSL doesn't
		1872	support non-blocking shut downs, it is not guarenteed that you can re-use
		1873	the stream afterwards.
1186		1874
1187	=cut	1875	=cut
1188		1876
1189	sub stoptls {	1877	sub stoptls {
1190	my ($self) = @_;	1878	my ($self) = @_;
1191		1879
1192	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1880	if ($self->{tls}) {
		1881	Net::SSLeay::shutdown ($self->{tls});
1193		1882
1194	delete $self->{_rbio};	1883	&_dotls;
1195	delete $self->{_wbio};	1884
1196	delete $self->{_tls_wbuf};	1885	# # we don't give a shit. no, we do, but we can't. no...#d#
1197	delete $self->{filter_r};	1886	# # we, we... have to use openssl :/#d#
1198	delete $self->{filter_w};	1887	# &_freetls;#d#
		1888	}
		1889	}
		1890
		1891	sub _freetls {
		1892	my ($self) = @_;
		1893
		1894	return unless $self->{tls};
		1895
		1896	$self->{tls_ctx}->_put_session (delete $self->{tls})
		1897	if $self->{tls} > 0;
		1898
		1899	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1199	}	1900	}
1200		1901
1201	sub DESTROY {	1902	sub DESTROY {
1202	my $self = shift;	1903	my ($self) = @_;
1203		1904
1204	$self->stoptls;	1905	&_freetls;
		1906
		1907	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
		1908
		1909	if ($linger && length $self->{wbuf} && $self->{fh}) {
		1910	my $fh = delete $self->{fh};
		1911	my $wbuf = delete $self->{wbuf};
		1912
		1913	my @linger;
		1914
		1915	push @linger, AE::io $fh, 1, sub {
		1916	my $len = syswrite $fh, $wbuf, length $wbuf;
		1917
		1918	if ($len > 0) {
		1919	substr $wbuf, 0, $len, "";
		1920	} else {
		1921	@linger = (); # end
		1922	}
		1923	};
		1924	push @linger, AE::timer $linger, 0, sub {
		1925	@linger = ();
		1926	};
		1927	}
		1928	}
		1929
		1930	=item $handle->destroy
		1931
		1932	Shuts down the handle object as much as possible - this call ensures that
		1933	no further callbacks will be invoked and as many resources as possible
		1934	will be freed. Any method you will call on the handle object after
		1935	destroying it in this way will be silently ignored (and it will return the
		1936	empty list).
		1937
		1938	Normally, you can just "forget" any references to an AnyEvent::Handle
		1939	object and it will simply shut down. This works in fatal error and EOF
		1940	callbacks, as well as code outside. It does I<NOT> work in a read or write
		1941	callback, so when you want to destroy the AnyEvent::Handle object from
		1942	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		1943	that case.
		1944
		1945	Destroying the handle object in this way has the advantage that callbacks
		1946	will be removed as well, so if those are the only reference holders (as
		1947	is common), then one doesn't need to do anything special to break any
		1948	reference cycles.
		1949
		1950	The handle might still linger in the background and write out remaining
		1951	data, as specified by the C<linger> option, however.
		1952
		1953	=cut
		1954
		1955	sub destroy {
		1956	my ($self) = @_;
		1957
		1958	$self->DESTROY;
		1959	%$self = ();
		1960	bless $self, "AnyEvent::Handle::destroyed";
		1961	}
		1962
		1963	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		1964	#nop
1205	}	1965	}
1206		1966
1207	=item AnyEvent::Handle::TLS_CTX	1967	=item AnyEvent::Handle::TLS_CTX
1208		1968
1209	This function creates and returns the Net::SSLeay::CTX object used by	1969	This function creates and returns the AnyEvent::TLS object used by default
1210	default for TLS mode.	1970	for TLS mode.
1211		1971
1212	The context is created like this:	1972	The context is created by calling L<AnyEvent::TLS> without any arguments.
1213
1214	Net::SSLeay::load_error_strings;
1215	Net::SSLeay::SSLeay_add_ssl_algorithms;
1216	Net::SSLeay::randomize;
1217
1218	my $CTX = Net::SSLeay::CTX_new;
1219
1220	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1221		1973
1222	=cut	1974	=cut
1223		1975
1224	our $TLS_CTX;	1976	our $TLS_CTX;
1225		1977
1226	sub TLS_CTX() {	1978	sub TLS_CTX() {
1227	$TLS_CTX || do {	1979	$TLS_CTX ||= do {
1228	require Net::SSLeay;	1980	require AnyEvent::TLS;
1229		1981
1230	Net::SSLeay::load_error_strings ();	1982	new AnyEvent::TLS
1231	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1232	Net::SSLeay::randomize ();
1233
1234	$TLS_CTX = Net::SSLeay::CTX_new ();
1235
1236	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1237
1238	$TLS_CTX
1239	}	1983	}
1240	}	1984	}
1241		1985
1242	=back	1986	=back
		1987
		1988
		1989	=head1 NONFREQUENTLY ASKED QUESTIONS
		1990
		1991	=over 4
		1992
		1993	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		1994	still get further invocations!
		1995
		1996	That's because AnyEvent::Handle keeps a reference to itself when handling
		1997	read or write callbacks.
		1998
		1999	It is only safe to "forget" the reference inside EOF or error callbacks,
		2000	from within all other callbacks, you need to explicitly call the C<<
		2001	->destroy >> method.
		2002
		2003	=item I get different callback invocations in TLS mode/Why can't I pause
		2004	reading?
		2005
		2006	Unlike, say, TCP, TLS connections do not consist of two independent
		2007	communication channels, one for each direction. Or put differently. The
		2008	read and write directions are not independent of each other: you cannot
		2009	write data unless you are also prepared to read, and vice versa.
		2010
		2011	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		2012	callback invocations when you are not expecting any read data - the reason
		2013	is that AnyEvent::Handle always reads in TLS mode.
		2014
		2015	During the connection, you have to make sure that you always have a
		2016	non-empty read-queue, or an C<on_read> watcher. At the end of the
		2017	connection (or when you no longer want to use it) you can call the
		2018	C<destroy> method.
		2019
		2020	=item How do I read data until the other side closes the connection?
		2021
		2022	If you just want to read your data into a perl scalar, the easiest way
		2023	to achieve this is by setting an C<on_read> callback that does nothing,
		2024	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		2025	will be in C<$_[0]{rbuf}>:
		2026
		2027	$handle->on_read (sub { });
		2028	$handle->on_eof (undef);
		2029	$handle->on_error (sub {
		2030	my $data = delete $_[0]{rbuf};
		2031	});
		2032
		2033	The reason to use C<on_error> is that TCP connections, due to latencies
		2034	and packets loss, might get closed quite violently with an error, when in
		2035	fact, all data has been received.
		2036
		2037	It is usually better to use acknowledgements when transferring data,
		2038	to make sure the other side hasn't just died and you got the data
		2039	intact. This is also one reason why so many internet protocols have an
		2040	explicit QUIT command.
		2041
		2042	=item I don't want to destroy the handle too early - how do I wait until
		2043	all data has been written?
		2044
		2045	After writing your last bits of data, set the C<on_drain> callback
		2046	and destroy the handle in there - with the default setting of
		2047	C<low_water_mark> this will be called precisely when all data has been
		2048	written to the socket:
		2049
		2050	$handle->push_write (...);
		2051	$handle->on_drain (sub {
		2052	warn "all data submitted to the kernel\n";
		2053	undef $handle;
		2054	});
		2055
		2056	If you just want to queue some data and then signal EOF to the other side,
		2057	consider using C<< ->push_shutdown >> instead.
		2058
		2059	=item I want to contact a TLS/SSL server, I don't care about security.
		2060
		2061	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2062	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		2063	parameter:
		2064
		2065	tcp_connect $host, $port, sub {
		2066	my ($fh) = @_;
		2067
		2068	my $handle = new AnyEvent::Handle
		2069	fh => $fh,
		2070	tls => "connect",
		2071	on_error => sub { ... };
		2072
		2073	$handle->push_write (...);
		2074	};
		2075
		2076	=item I want to contact a TLS/SSL server, I do care about security.
		2077
		2078	Then you should additionally enable certificate verification, including
		2079	peername verification, if the protocol you use supports it (see
		2080	L<AnyEvent::TLS>, C<verify_peername>).
		2081
		2082	E.g. for HTTPS:
		2083
		2084	tcp_connect $host, $port, sub {
		2085	my ($fh) = @_;
		2086
		2087	my $handle = new AnyEvent::Handle
		2088	fh => $fh,
		2089	peername => $host,
		2090	tls => "connect",
		2091	tls_ctx => { verify => 1, verify_peername => "https" },
		2092	...
		2093
		2094	Note that you must specify the hostname you connected to (or whatever
		2095	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2096	peername verification will be done.
		2097
		2098	The above will use the system-dependent default set of trusted CA
		2099	certificates. If you want to check against a specific CA, add the
		2100	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2101
		2102	tls_ctx => {
		2103	verify => 1,
		2104	verify_peername => "https",
		2105	ca_file => "my-ca-cert.pem",
		2106	},
		2107
		2108	=item I want to create a TLS/SSL server, how do I do that?
		2109
		2110	Well, you first need to get a server certificate and key. You have
		2111	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2112	self-signed certificate (cheap. check the search engine of your choice,
		2113	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2114	nice program for that purpose).
		2115
		2116	Then create a file with your private key (in PEM format, see
		2117	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2118	file should then look like this:
		2119
		2120	-----BEGIN RSA PRIVATE KEY-----
		2121	...header data
		2122	... lots of base64'y-stuff
		2123	-----END RSA PRIVATE KEY-----
		2124
		2125	-----BEGIN CERTIFICATE-----
		2126	... lots of base64'y-stuff
		2127	-----END CERTIFICATE-----
		2128
		2129	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2130	specify this file as C<cert_file>:
		2131
		2132	tcp_server undef, $port, sub {
		2133	my ($fh) = @_;
		2134
		2135	my $handle = new AnyEvent::Handle
		2136	fh => $fh,
		2137	tls => "accept",
		2138	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2139	...
		2140
		2141	When you have intermediate CA certificates that your clients might not
		2142	know about, just append them to the C<cert_file>.
		2143
		2144	=back
		2145
1243		2146
1244	=head1 SUBCLASSING AnyEvent::Handle	2147	=head1 SUBCLASSING AnyEvent::Handle
1245		2148
1246	In many cases, you might want to subclass AnyEvent::Handle.	2149	In many cases, you might want to subclass AnyEvent::Handle.
1247		2150
…		…
1251	=over 4	2154	=over 4
1252		2155
1253	=item * all constructor arguments become object members.	2156	=item * all constructor arguments become object members.
1254		2157
1255	At least initially, when you pass a C<tls>-argument to the constructor it	2158	At least initially, when you pass a C<tls>-argument to the constructor it
1256	will end up in C<< $handle->{tls} >>. Those members might be changes or	2159	will end up in C<< $handle->{tls} >>. Those members might be changed or
1257	mutated later on (for example C<tls> will hold the TLS connection object).	2160	mutated later on (for example C<tls> will hold the TLS connection object).
1258		2161
1259	=item * other object member names are prefixed with an C<_>.	2162	=item * other object member names are prefixed with an C<_>.
1260		2163
1261	All object members not explicitly documented (internal use) are prefixed	2164	All object members not explicitly documented (internal use) are prefixed

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines