ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.130 by root, Mon Jun 29 21:00:32 2009 UTC vs.
Revision 1.231 by root, Tue Mar 27 23:47:57 2012 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.45;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
		15	my ($hdl, $fatal, $msg) = @_;
		16	AE::log error => "Got error $msg!";
		17	$hdl->destroy;
32	$cv->send;	18	$cv->send;
33	},
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	say "got line <$line>";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	stream-based filehandles (sockets, pipes, and other stream things).
52	on sockets see L<AnyEvent::Util>.
53		37
54	The L<AnyEvent::Intro> tutorial contains some well-documented	38	The L<AnyEvent::Intro> tutorial contains some well-documented
55	AnyEvent::Handle examples.	39	AnyEvent::Handle examples.
56		40
57	In the following, when the documentation refers to of "bytes" then this	41	In the following, where the documentation refers to "bytes", it means
58	means characters. As sysread and syswrite are used for all I/O, their	42	characters. As sysread and syswrite are used for all I/O, their
59	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
60		47
61	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
62	argument.	49	argument.
63		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
		79
		80	sub MAX_READ_SIZE() { 131072 }
		81
64	=head1 METHODS	82	=head1 METHODS
65		83
66	=over 4	84	=over 4
67		85
68	=item B<new (%args)>	86	=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
69		87
70	The constructor supports these arguments (all as key => value pairs).	88	The constructor supports these arguments (all as C<< key => value >> pairs).
71		89
72	=over 4	90	=over 4
73		91
74	=item fh => $filehandle [MANDATORY]	92	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
75		93
76	The filehandle this L<AnyEvent::Handle> object will operate on.	94	The filehandle this L<AnyEvent::Handle> object will operate on.
77
78	NOTE: The filehandle will be set to non-blocking mode (using	95	NOTE: The filehandle will be set to non-blocking mode (using
79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in	96	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
80	that mode.	97	that mode.
81		98
		99	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		100
		101	Try to connect to the specified host and service (port), using
		102	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		103	default C<peername>.
		104
		105	You have to specify either this parameter, or C<fh>, above.
		106
		107	It is possible to push requests on the read and write queues, and modify
		108	properties of the stream, even while AnyEvent::Handle is connecting.
		109
		110	When this parameter is specified, then the C<on_prepare>,
		111	C<on_connect_error> and C<on_connect> callbacks will be called under the
		112	appropriate circumstances:
		113
		114	=over 4
		115
		116	=item on_prepare => $cb->($handle)
		117
		118	This (rarely used) callback is called before a new connection is
		119	attempted, but after the file handle has been created (you can access that
		120	file handle via C<< $handle->{fh} >>). It could be used to prepare the
		121	file handle with parameters required for the actual connect (as opposed to
		122	settings that can be changed when the connection is already established).
		123
		124	The return value of this callback should be the connect timeout value in
		125	seconds (or C<0>, or C<undef>, or the empty list, to indicate that the
		126	default timeout is to be used).
		127
		128	=item on_connect => $cb->($handle, $host, $port, $retry->())
		129
		130	This callback is called when a connection has been successfully established.
		131
		132	The peer's numeric host and port (the socket peername) are passed as
		133	parameters, together with a retry callback. At the time it is called the
		134	read and write queues, EOF status, TLS status and similar properties of
		135	the handle will have been reset.
		136
		137	It is not allowed to use the read or write queues while the handle object
		138	is connecting.
		139
		140	If, for some reason, the handle is not acceptable, calling C<$retry> will
		141	continue with the next connection target (in case of multi-homed hosts or
		142	SRV records there can be multiple connection endpoints). The C<$retry>
		143	callback can be invoked after the connect callback returns, i.e. one can
		144	start a handshake and then decide to retry with the next host if the
		145	handshake fails.
		146
		147	In most cases, you should ignore the C<$retry> parameter.
		148
		149	=item on_connect_error => $cb->($handle, $message)
		150
		151	This callback is called when the connection could not be
		152	established. C<$!> will contain the relevant error code, and C<$message> a
		153	message describing it (usually the same as C<"$!">).
		154
		155	If this callback isn't specified, then C<on_error> will be called with a
		156	fatal error instead.
		157
		158	=back
		159
		160	=item on_error => $cb->($handle, $fatal, $message)
		161
		162	This is the error callback, which is called when, well, some error
		163	occured, such as not being able to resolve the hostname, failure to
		164	connect, or a read error.
		165
		166	Some errors are fatal (which is indicated by C<$fatal> being true). On
		167	fatal errors the handle object will be destroyed (by a call to C<< ->
		168	destroy >>) after invoking the error callback (which means you are free to
		169	examine the handle object). Examples of fatal errors are an EOF condition
		170	with active (but unsatisfiable) read watchers (C<EPIPE>) or I/O errors. In
		171	cases where the other side can close the connection at will, it is
		172	often easiest to not report C<EPIPE> errors in this callback.
		173
		174	AnyEvent::Handle tries to find an appropriate error code for you to check
		175	against, but in some cases (TLS errors), this does not work well. It is
		176	recommended to always output the C<$message> argument in human-readable
		177	error messages (it's usually the same as C<"$!">).
		178
		179	Non-fatal errors can be retried by returning, but it is recommended
		180	to simply ignore this parameter and instead abondon the handle object
		181	when this callback is invoked. Examples of non-fatal errors are timeouts
		182	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
		183
		184	On entry to the callback, the value of C<$!> contains the operating
		185	system error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		186	C<EPROTO>).
		187
		188	While not mandatory, it is I<highly> recommended to set this callback, as
		189	you will not be notified of errors otherwise. The default just calls
		190	C<croak>.
		191
		192	=item on_read => $cb->($handle)
		193
		194	This sets the default read callback, which is called when data arrives
		195	and no read request is in the queue (unlike read queue callbacks, this
		196	callback will only be called when at least one octet of data is in the
		197	read buffer).
		198
		199	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
		200	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		201	must not enlarge or modify the read buffer, you can only remove data at
		202	the beginning from it.
		203
		204	You can also call C<< ->push_read (...) >> or any other function that
		205	modifies the read queue. Or do both. Or ...
		206
		207	When an EOF condition is detected, AnyEvent::Handle will first try to
		208	feed all the remaining data to the queued callbacks and C<on_read> before
		209	calling the C<on_eof> callback. If no progress can be made, then a fatal
		210	error will be raised (with C<$!> set to C<EPIPE>).
		211
		212	Note that, unlike requests in the read queue, an C<on_read> callback
		213	doesn't mean you I<require> some data: if there is an EOF and there
		214	are outstanding read requests then an error will be flagged. With an
		215	C<on_read> callback, the C<on_eof> callback will be invoked.
		216
82	=item on_eof => $cb->($handle)	217	=item on_eof => $cb->($handle)
83		218
84	Set the callback to be called when an end-of-file condition is detected,	219	Set the callback to be called when an end-of-file condition is detected,
85	i.e. in the case of a socket, when the other side has closed the	220	i.e. in the case of a socket, when the other side has closed the
86	connection cleanly.	221	connection cleanly, and there are no outstanding read requests in the
		222	queue (if there are read requests, then an EOF counts as an unexpected
		223	connection close and will be flagged as an error).
87		224
88	For sockets, this just means that the other side has stopped sending data,	225	For sockets, this just means that the other side has stopped sending data,
89	you can still try to write data, and, in fact, one can return from the EOF	226	you can still try to write data, and, in fact, one can return from the EOF
90	callback and continue writing data, as only the read part has been shut	227	callback and continue writing data, as only the read part has been shut
91	down.	228	down.
92		229
93	While not mandatory, it is I<highly> recommended to set an EOF callback,
94	otherwise you might end up with a closed socket while you are still
95	waiting for data.
96
97	If an EOF condition has been detected but no C<on_eof> callback has been	230	If an EOF condition has been detected but no C<on_eof> callback has been
98	set, then a fatal error will be raised with C<$!> set to <0>.	231	set, then a fatal error will be raised with C<$!> set to <0>.
99		232
100	=item on_error => $cb->($handle, $fatal)
101
102	This is the error callback, which is called when, well, some error
103	occured, such as not being able to resolve the hostname, failure to
104	connect or a read error.
105
106	Some errors are fatal (which is indicated by C<$fatal> being true). On
107	fatal errors the handle object will be shut down and will not be usable
108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal
109	errors are an EOF condition with active (but unsatisifable) read watchers
110	(C<EPIPE>) or I/O errors.
111
112	Non-fatal errors can be retried by simply returning, but it is recommended
113	to simply ignore this parameter and instead abondon the handle object
114	when this callback is invoked. Examples of non-fatal errors are timeouts
115	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
116
117	On callback entrance, the value of C<$!> contains the operating system
118	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).
119
120	While not mandatory, it is I<highly> recommended to set this callback, as
121	you will not be notified of errors otherwise. The default simply calls
122	C<croak>.
123
124	=item on_read => $cb->($handle)
125
126	This sets the default read callback, which is called when data arrives
127	and no read request is in the queue (unlike read queue callbacks, this
128	callback will only be called when at least one octet of data is in the
129	read buffer).
130
131	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
132	method or access the C<$handle->{rbuf}> member directly. Note that you
133	must not enlarge or modify the read buffer, you can only remove data at
134	the beginning from it.
135
136	When an EOF condition is detected then AnyEvent::Handle will first try to
137	feed all the remaining data to the queued callbacks and C<on_read> before
138	calling the C<on_eof> callback. If no progress can be made, then a fatal
139	error will be raised (with C<$!> set to C<EPIPE>).
140
141	=item on_drain => $cb->($handle)	233	=item on_drain => $cb->($handle)
142		234
143	This sets the callback that is called when the write buffer becomes empty	235	This sets the callback that is called once when the write buffer becomes
144	(or when the callback is set and the buffer is empty already).	236	empty (and immediately when the handle object is created).
145		237
146	To append to the write buffer, use the C<< ->push_write >> method.	238	To append to the write buffer, use the C<< ->push_write >> method.
147		239
148	This callback is useful when you don't want to put all of your write data	240	This callback is useful when you don't want to put all of your write data
149	into the queue at once, for example, when you want to write the contents	241	into the queue at once, for example, when you want to write the contents
…		…
151	memory and push it into the queue, but instead only read more data from	243	memory and push it into the queue, but instead only read more data from
152	the file when the write queue becomes empty.	244	the file when the write queue becomes empty.
153		245
154	=item timeout => $fractional_seconds	246	=item timeout => $fractional_seconds
155		247
		248	=item rtimeout => $fractional_seconds
		249
		250	=item wtimeout => $fractional_seconds
		251
156	If non-zero, then this enables an "inactivity" timeout: whenever this many	252	If non-zero, then these enables an "inactivity" timeout: whenever this
157	seconds pass without a successful read or write on the underlying file	253	many seconds pass without a successful read or write on the underlying
158	handle, the C<on_timeout> callback will be invoked (and if that one is	254	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
159	missing, a non-fatal C<ETIMEDOUT> error will be raised).	255	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		256	error will be raised).
160		257
		258	There are three variants of the timeouts that work independently of each
		259	other, for both read and write (triggered when nothing was read I<OR>
		260	written), just read (triggered when nothing was read), and just write:
		261	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		262	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		263	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
		264
161	Note that timeout processing is also active when you currently do not have	265	Note that timeout processing is active even when you do not have any
162	any outstanding read or write requests: If you plan to keep the connection	266	outstanding read or write requests: If you plan to keep the connection
163	idle then you should disable the timout temporarily or ignore the timeout	267	idle then you should disable the timeout temporarily or ignore the
164	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply	268	timeout in the corresponding C<on_timeout> callback, in which case
165	restart the timeout.	269	AnyEvent::Handle will simply restart the timeout.
166		270
167	Zero (the default) disables this timeout.	271	Zero (the default) disables the corresponding timeout.
168		272
169	=item on_timeout => $cb->($handle)	273	=item on_timeout => $cb->($handle)
		274
		275	=item on_rtimeout => $cb->($handle)
		276
		277	=item on_wtimeout => $cb->($handle)
170		278
171	Called whenever the inactivity timeout passes. If you return from this	279	Called whenever the inactivity timeout passes. If you return from this
172	callback, then the timeout will be reset as if some activity had happened,	280	callback, then the timeout will be reset as if some activity had happened,
173	so this condition is not fatal in any way.	281	so this condition is not fatal in any way.
174		282
…		…
182	be configured to accept only so-and-so much data that it cannot act on	290	be configured to accept only so-and-so much data that it cannot act on
183	(for example, when expecting a line, an attacker could send an unlimited	291	(for example, when expecting a line, an attacker could send an unlimited
184	amount of data without a callback ever being called as long as the line	292	amount of data without a callback ever being called as long as the line
185	isn't finished).	293	isn't finished).
186		294
		295	=item wbuf_max => <bytes>
		296
		297	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
		298	when the write buffer ever (strictly) exceeds this size. This is useful to
		299	avoid some forms of denial-of-service attacks.
		300
		301	Although the units of this parameter is bytes, this is the I<raw> number
		302	of bytes not yet accepted by the kernel. This can make a difference when
		303	you e.g. use TLS, as TLS typically makes your write data larger (but it
		304	can also make it smaller due to compression).
		305
		306	As an example of when this limit is useful, take a chat server that sends
		307	chat messages to a client. If the client does not read those in a timely
		308	manner then the send buffer in the server would grow unbounded.
		309
187	=item autocork => <boolean>	310	=item autocork => <boolean>
188		311
189	When disabled (the default), then C<push_write> will try to immediately	312	When disabled (the default), C<push_write> will try to immediately
190	write the data to the handle, if possible. This avoids having to register	313	write the data to the handle if possible. This avoids having to register
191	a write watcher and wait for the next event loop iteration, but can	314	a write watcher and wait for the next event loop iteration, but can
192	be inefficient if you write multiple small chunks (on the wire, this	315	be inefficient if you write multiple small chunks (on the wire, this
193	disadvantage is usually avoided by your kernel's nagle algorithm, see	316	disadvantage is usually avoided by your kernel's nagle algorithm, see
194	C<no_delay>, but this option can save costly syscalls).	317	C<no_delay>, but this option can save costly syscalls).
195		318
196	When enabled, then writes will always be queued till the next event loop	319	When enabled, writes will always be queued till the next event loop
197	iteration. This is efficient when you do many small writes per iteration,	320	iteration. This is efficient when you do many small writes per iteration,
198	but less efficient when you do a single write only per iteration (or when	321	but less efficient when you do a single write only per iteration (or when
199	the write buffer often is full). It also increases write latency.	322	the write buffer often is full). It also increases write latency.
200		323
201	=item no_delay => <boolean>	324	=item no_delay => <boolean>
…		…
205	the Nagle algorithm, and usually it is beneficial.	328	the Nagle algorithm, and usually it is beneficial.
206		329
207	In some situations you want as low a delay as possible, which can be	330	In some situations you want as low a delay as possible, which can be
208	accomplishd by setting this option to a true value.	331	accomplishd by setting this option to a true value.
209		332
210	The default is your opertaing system's default behaviour (most likely	333	The default is your operating system's default behaviour (most likely
211	enabled), this option explicitly enables or disables it, if possible.	334	enabled). This option explicitly enables or disables it, if possible.
		335
		336	=item keepalive => <boolean>
		337
		338	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		339	normally, TCP connections have no time-out once established, so TCP
		340	connections, once established, can stay alive forever even when the other
		341	side has long gone. TCP keepalives are a cheap way to take down long-lived
		342	TCP connections when the other side becomes unreachable. While the default
		343	is OS-dependent, TCP keepalives usually kick in after around two hours,
		344	and, if the other side doesn't reply, take down the TCP connection some 10
		345	to 15 minutes later.
		346
		347	It is harmless to specify this option for file handles that do not support
		348	keepalives, and enabling it on connections that are potentially long-lived
		349	is usually a good idea.
		350
		351	=item oobinline => <boolean>
		352
		353	BSD majorly fucked up the implementation of TCP urgent data. The result
		354	is that almost no OS implements TCP according to the specs, and every OS
		355	implements it slightly differently.
		356
		357	If you want to handle TCP urgent data, then setting this flag (the default
		358	is enabled) gives you the most portable way of getting urgent data, by
		359	putting it into the stream.
		360
		361	Since BSD emulation of OOB data on top of TCP's urgent data can have
		362	security implications, AnyEvent::Handle sets this flag automatically
		363	unless explicitly specified. Note that setting this flag after
		364	establishing a connection I<may> be a bit too late (data loss could
		365	already have occured on BSD systems), but at least it will protect you
		366	from most attacks.
212		367
213	=item read_size => <bytes>	368	=item read_size => <bytes>
214		369
215	The default read block size (the amount of bytes this module will	370	The initial read block size, the number of bytes this module will try
216	try to read during each loop iteration, which affects memory	371	to read during each loop iteration. Each handle object will consume
217	requirements). Default: C<8192>.	372	at least this amount of memory for the read buffer as well, so when
		373	handling many connections watch out for memory requirements). See also
		374	C<max_read_size>. Default: C<2048>.
		375
		376	=item max_read_size => <bytes>
		377
		378	The maximum read buffer size used by the dynamic adjustment
		379	algorithm: Each time AnyEvent::Handle can read C<read_size> bytes in
		380	one go it will double C<read_size> up to the maximum given by this
		381	option. Default: C<131072> or C<read_size>, whichever is higher.
218		382
219	=item low_water_mark => <bytes>	383	=item low_water_mark => <bytes>
220		384
221	Sets the amount of bytes (default: C<0>) that make up an "empty" write	385	Sets the number of bytes (default: C<0>) that make up an "empty" write
222	buffer: If the write reaches this size or gets even samller it is	386	buffer: If the buffer reaches this size or gets even samller it is
223	considered empty.	387	considered empty.
224		388
225	Sometimes it can be beneficial (for performance reasons) to add data to	389	Sometimes it can be beneficial (for performance reasons) to add data to
226	the write buffer before it is fully drained, but this is a rare case, as	390	the write buffer before it is fully drained, but this is a rare case, as
227	the operating system kernel usually buffers data as well, so the default	391	the operating system kernel usually buffers data as well, so the default
228	is good in almost all cases.	392	is good in almost all cases.
229		393
230	=item linger => <seconds>	394	=item linger => <seconds>
231		395
232	If non-zero (default: C<3600>), then the destructor of the	396	If this is non-zero (default: C<3600>), the destructor of the
233	AnyEvent::Handle object will check whether there is still outstanding	397	AnyEvent::Handle object will check whether there is still outstanding
234	write data and will install a watcher that will write this data to the	398	write data and will install a watcher that will write this data to the
235	socket. No errors will be reported (this mostly matches how the operating	399	socket. No errors will be reported (this mostly matches how the operating
236	system treats outstanding data at socket close time).	400	system treats outstanding data at socket close time).
237		401
238	This will not work for partial TLS data that could not be encoded	402	This will not work for partial TLS data that could not be encoded
239	yet. This data will be lost. Calling the C<stoptls> method in time might	403	yet. This data will be lost. Calling the C<stoptls> method in time might
240	help.	404	help.
241		405
		406	=item peername => $string
		407
		408	A string used to identify the remote site - usually the DNS hostname
		409	(I<not> IDN!) used to create the connection, rarely the IP address.
		410
		411	Apart from being useful in error messages, this string is also used in TLS
		412	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		413	verification will be skipped when C<peername> is not specified or is
		414	C<undef>.
		415
242	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	416	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
243		417
244	When this parameter is given, it enables TLS (SSL) mode, that means	418	When this parameter is given, it enables TLS (SSL) mode, that means
245	AnyEvent will start a TLS handshake as soon as the conenction has been	419	AnyEvent will start a TLS handshake as soon as the connection has been
246	established and will transparently encrypt/decrypt data afterwards.	420	established and will transparently encrypt/decrypt data afterwards.
		421
		422	All TLS protocol errors will be signalled as C<EPROTO>, with an
		423	appropriate error message.
247		424
248	TLS mode requires Net::SSLeay to be installed (it will be loaded	425	TLS mode requires Net::SSLeay to be installed (it will be loaded
249	automatically when you try to create a TLS handle): this module doesn't	426	automatically when you try to create a TLS handle): this module doesn't
250	have a dependency on that module, so if your module requires it, you have	427	have a dependency on that module, so if your module requires it, you have
251	to add the dependency yourself.	428	to add the dependency yourself.
…		…
255	mode.	432	mode.
256		433
257	You can also provide your own TLS connection object, but you have	434	You can also provide your own TLS connection object, but you have
258	to make sure that you call either C<Net::SSLeay::set_connect_state>	435	to make sure that you call either C<Net::SSLeay::set_connect_state>
259	or C<Net::SSLeay::set_accept_state> on it before you pass it to	436	or C<Net::SSLeay::set_accept_state> on it before you pass it to
260	AnyEvent::Handle.	437	AnyEvent::Handle. Also, this module will take ownership of this connection
		438	object.
		439
		440	At some future point, AnyEvent::Handle might switch to another TLS
		441	implementation, then the option to use your own session object will go
		442	away.
261		443
262	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,	444	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
263	passing in the wrong integer will lead to certain crash. This most often	445	passing in the wrong integer will lead to certain crash. This most often
264	happens when one uses a stylish C<< tls => 1 >> and is surprised about the	446	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
265	segmentation fault.	447	segmentation fault.
266		448
267	See the C<< ->starttls >> method for when need to start TLS negotiation later.	449	Use the C<< ->starttls >> method if you need to start TLS negotiation later.
268		450
269	=item tls_ctx => $ssl_ctx	451	=item tls_ctx => $anyevent_tls
270		452
271	Use the given C<Net::SSLeay::CTX> object to create the new TLS connection	453	Use the given C<AnyEvent::TLS> object to create the new TLS connection
272	(unless a connection object was specified directly). If this parameter is	454	(unless a connection object was specified directly). If this
273	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	455	parameter is missing (or C<undef>), then AnyEvent::Handle will use
		456	C<AnyEvent::Handle::TLS_CTX>.
		457
		458	Instead of an object, you can also specify a hash reference with C<< key
		459	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		460	new TLS context object.
		461
		462	=item on_starttls => $cb->($handle, $success[, $error_message])
		463
		464	This callback will be invoked when the TLS/SSL handshake has finished. If
		465	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		466	(C<on_stoptls> will not be called in this case).
		467
		468	The session in C<< $handle->{tls} >> can still be examined in this
		469	callback, even when the handshake was not successful.
		470
		471	TLS handshake failures will not cause C<on_error> to be invoked when this
		472	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		473
		474	Without this callback, handshake failures lead to C<on_error> being
		475	called as usual.
		476
		477	Note that you cannot just call C<starttls> again in this callback. If you
		478	need to do that, start an zero-second timer instead whose callback can
		479	then call C<< ->starttls >> again.
		480
		481	=item on_stoptls => $cb->($handle)
		482
		483	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		484	set, then it will be invoked after freeing the TLS session. If it is not,
		485	then a TLS shutdown condition will be treated like a normal EOF condition
		486	on the handle.
		487
		488	The session in C<< $handle->{tls} >> can still be examined in this
		489	callback.
		490
		491	This callback will only be called on TLS shutdowns, not when the
		492	underlying handle signals EOF.
274		493
275	=item json => JSON or JSON::XS object	494	=item json => JSON or JSON::XS object
276		495
277	This is the json coder object used by the C<json> read and write types.	496	This is the json coder object used by the C<json> read and write types.
278		497
…		…
287		506
288	=cut	507	=cut
289		508
290	sub new {	509	sub new {
291	my $class = shift;	510	my $class = shift;
292
293	my $self = bless { @_ }, $class;	511	my $self = bless { @_ }, $class;
294		512
295	$self->{fh} or Carp::croak "mandatory argument fh is missing";	513	if ($self->{fh}) {
		514	$self->_start;
		515	return unless $self->{fh}; # could be gone by now
		516
		517	} elsif ($self->{connect}) {
		518	require AnyEvent::Socket;
		519
		520	$self->{peername} = $self->{connect}[0]
		521	unless exists $self->{peername};
		522
		523	$self->{_skip_drain_rbuf} = 1;
		524
		525	{
		526	Scalar::Util::weaken (my $self = $self);
		527
		528	$self->{_connect} =
		529	AnyEvent::Socket::tcp_connect (
		530	$self->{connect}[0],
		531	$self->{connect}[1],
		532	sub {
		533	my ($fh, $host, $port, $retry) = @_;
		534
		535	delete $self->{_connect}; # no longer needed
		536
		537	if ($fh) {
		538	$self->{fh} = $fh;
		539
		540	delete $self->{_skip_drain_rbuf};
		541	$self->_start;
		542
		543	$self->{on_connect}
		544	and $self->{on_connect}($self, $host, $port, sub {
		545	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		546	$self->{_skip_drain_rbuf} = 1;
		547	&$retry;
		548	});
		549
		550	} else {
		551	if ($self->{on_connect_error}) {
		552	$self->{on_connect_error}($self, "$!");
		553	$self->destroy if $self;
		554	} else {
		555	$self->_error ($!, 1);
		556	}
		557	}
		558	},
		559	sub {
		560	local $self->{fh} = $_[0];
		561
		562	$self->{on_prepare}
		563	? $self->{on_prepare}->($self)
		564	: ()
		565	}
		566	);
		567	}
		568
		569	} else {
		570	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		571	}
		572
		573	$self
		574	}
		575
		576	sub _start {
		577	my ($self) = @_;
		578
		579	# too many clueless people try to use udp and similar sockets
		580	# with AnyEvent::Handle, do them a favour.
		581	my $type = getsockopt $self->{fh}, Socket::SOL_SOCKET (), Socket::SO_TYPE ();
		582	Carp::croak "AnyEvent::Handle: only stream sockets supported, anything else will NOT work!"
		583	if Socket::SOCK_STREAM () != (unpack "I", $type) && defined $type;
296		584
297	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	585	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
298		586
		587	$self->{_activity} =
		588	$self->{_ractivity} =
		589	$self->{_wactivity} = AE::now;
		590
		591	$self->{read_size} ||= 2048;
		592	$self->{max_read_size} = $self->{read_size}
		593	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		594
		595	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		596	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		597	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		598
		599	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		600	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		601
		602	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		603
299	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})	604	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
300	if $self->{tls};	605	if $self->{tls};
301		606
302	$self->{_activity} = AnyEvent->now;
303	$self->_timeout;
304
305	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	607	$self->on_drain (delete $self->{on_drain} ) if $self->{on_drain};
306	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
307		608
308	$self->start_read	609	$self->start_read
309	if $self->{on_read};	610	if $self->{on_read} || @{ $self->{_queue} };
310		611
311	$self	612	$self->_drain_wbuf;
312	}
313
314	sub _shutdown {
315	my ($self) = @_;
316
317	delete @$self{qw(_tw _rw _ww fh rbuf wbuf on_read _queue)};
318
319	&_freetls;
320	}	613	}
321		614
322	sub _error {	615	sub _error {
323	my ($self, $errno, $fatal) = @_;	616	my ($self, $errno, $fatal, $message) = @_;
324
325	$self->_shutdown
326	if $fatal;
327		617
328	$! = $errno;	618	$! = $errno;
		619	$message ||= "$!";
329		620
330	if ($self->{on_error}) {	621	if ($self->{on_error}) {
331	$self->{on_error}($self, $fatal);	622	$self->{on_error}($self, $fatal, $message);
332	} elsif ($self->{fh}) {	623	$self->destroy if $fatal;
		624	} elsif ($self->{fh} || $self->{connect}) {
		625	$self->destroy;
333	Carp::croak "AnyEvent::Handle uncaught error: $!";	626	Carp::croak "AnyEvent::Handle uncaught error: $message";
334	}	627	}
335	}	628	}
336		629
337	=item $fh = $handle->fh	630	=item $fh = $handle->fh
338		631
…		…
362	$_[0]{on_eof} = $_[1];	655	$_[0]{on_eof} = $_[1];
363	}	656	}
364		657
365	=item $handle->on_timeout ($cb)	658	=item $handle->on_timeout ($cb)
366		659
367	Replace the current C<on_timeout> callback, or disables the callback (but	660	=item $handle->on_rtimeout ($cb)
368	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
369	argument and method.
370		661
371	=cut	662	=item $handle->on_wtimeout ($cb)
372		663
373	sub on_timeout {	664	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
374	$_[0]{on_timeout} = $_[1];	665	callback, or disables the callback (but not the timeout) if C<$cb> =
375	}	666	C<undef>. See the C<timeout> constructor argument and method.
		667
		668	=cut
		669
		670	# see below
376		671
377	=item $handle->autocork ($boolean)	672	=item $handle->autocork ($boolean)
378		673
379	Enables or disables the current autocork behaviour (see C<autocork>	674	Enables or disables the current autocork behaviour (see C<autocork>
380	constructor argument). Changes will only take effect on the next write.	675	constructor argument). Changes will only take effect on the next write.
…		…
393	=cut	688	=cut
394		689
395	sub no_delay {	690	sub no_delay {
396	$_[0]{no_delay} = $_[1];	691	$_[0]{no_delay} = $_[1];
397		692
		693	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		694	if $_[0]{fh};
		695	}
		696
		697	=item $handle->keepalive ($boolean)
		698
		699	Enables or disables the C<keepalive> setting (see constructor argument of
		700	the same name for details).
		701
		702	=cut
		703
		704	sub keepalive {
		705	$_[0]{keepalive} = $_[1];
		706
398	eval {	707	eval {
399	local $SIG{__DIE__};	708	local $SIG{__DIE__};
400	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	709	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		710	if $_[0]{fh};
401	};	711	};
402	}	712	}
403		713
		714	=item $handle->oobinline ($boolean)
		715
		716	Enables or disables the C<oobinline> setting (see constructor argument of
		717	the same name for details).
		718
		719	=cut
		720
		721	sub oobinline {
		722	$_[0]{oobinline} = $_[1];
		723
		724	eval {
		725	local $SIG{__DIE__};
		726	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		727	if $_[0]{fh};
		728	};
		729	}
		730
		731	=item $handle->keepalive ($boolean)
		732
		733	Enables or disables the C<keepalive> setting (see constructor argument of
		734	the same name for details).
		735
		736	=cut
		737
		738	sub keepalive {
		739	$_[0]{keepalive} = $_[1];
		740
		741	eval {
		742	local $SIG{__DIE__};
		743	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		744	if $_[0]{fh};
		745	};
		746	}
		747
		748	=item $handle->on_starttls ($cb)
		749
		750	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		751
		752	=cut
		753
		754	sub on_starttls {
		755	$_[0]{on_starttls} = $_[1];
		756	}
		757
		758	=item $handle->on_stoptls ($cb)
		759
		760	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		761
		762	=cut
		763
		764	sub on_stoptls {
		765	$_[0]{on_stoptls} = $_[1];
		766	}
		767
		768	=item $handle->rbuf_max ($max_octets)
		769
		770	Configures the C<rbuf_max> setting (C<undef> disables it).
		771
		772	=item $handle->wbuf_max ($max_octets)
		773
		774	Configures the C<wbuf_max> setting (C<undef> disables it).
		775
		776	=cut
		777
		778	sub rbuf_max {
		779	$_[0]{rbuf_max} = $_[1];
		780	}
		781
		782	sub wbuf_max {
		783	$_[0]{wbuf_max} = $_[1];
		784	}
		785
404	#############################################################################	786	#############################################################################
405		787
406	=item $handle->timeout ($seconds)	788	=item $handle->timeout ($seconds)
407		789
		790	=item $handle->rtimeout ($seconds)
		791
		792	=item $handle->wtimeout ($seconds)
		793
408	Configures (or disables) the inactivity timeout.	794	Configures (or disables) the inactivity timeout.
409		795
410	=cut	796	The timeout will be checked instantly, so this method might destroy the
		797	handle before it returns.
411		798
412	sub timeout {	799	=item $handle->timeout_reset
		800
		801	=item $handle->rtimeout_reset
		802
		803	=item $handle->wtimeout_reset
		804
		805	Reset the activity timeout, as if data was received or sent.
		806
		807	These methods are cheap to call.
		808
		809	=cut
		810
		811	for my $dir ("", "r", "w") {
		812	my $timeout = "${dir}timeout";
		813	my $tw = "_${dir}tw";
		814	my $on_timeout = "on_${dir}timeout";
		815	my $activity = "_${dir}activity";
		816	my $cb;
		817
		818	*$on_timeout = sub {
		819	$_[0]{$on_timeout} = $_[1];
		820	};
		821
		822	*$timeout = sub {
413	my ($self, $timeout) = @_;	823	my ($self, $new_value) = @_;
414		824
		825	$new_value >= 0
		826	or Carp::croak "AnyEvent::Handle->$timeout called with negative timeout ($new_value), caught";
		827
415	$self->{timeout} = $timeout;	828	$self->{$timeout} = $new_value;
416	$self->_timeout;	829	delete $self->{$tw}; &$cb;
417	}	830	};
418		831
		832	*{"${dir}timeout_reset"} = sub {
		833	$_[0]{$activity} = AE::now;
		834	};
		835
		836	# main workhorse:
419	# reset the timeout watcher, as neccessary	837	# reset the timeout watcher, as neccessary
420	# also check for time-outs	838	# also check for time-outs
421	sub _timeout {	839	$cb = sub {
422	my ($self) = @_;	840	my ($self) = @_;
423		841
424	if ($self->{timeout}) {	842	if ($self->{$timeout} && $self->{fh}) {
425	my $NOW = AnyEvent->now;	843	my $NOW = AE::now;
426		844
427	# when would the timeout trigger?	845	# when would the timeout trigger?
428	my $after = $self->{_activity} + $self->{timeout} - $NOW;	846	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
429		847
430	# now or in the past already?	848	# now or in the past already?
431	if ($after <= 0) {	849	if ($after <= 0) {
432	$self->{_activity} = $NOW;	850	$self->{$activity} = $NOW;
433		851
434	if ($self->{on_timeout}) {	852	if ($self->{$on_timeout}) {
435	$self->{on_timeout}($self);	853	$self->{$on_timeout}($self);
436	} else {	854	} else {
437	$self->_error (&Errno::ETIMEDOUT);	855	$self->_error (Errno::ETIMEDOUT);
		856	}
		857
		858	# callback could have changed timeout value, optimise
		859	return unless $self->{$timeout};
		860
		861	# calculate new after
		862	$after = $self->{$timeout};
438	}	863	}
439		864
440	# callback could have changed timeout value, optimise	865	Scalar::Util::weaken $self;
441	return unless $self->{timeout};	866	return unless $self; # ->error could have destroyed $self
442		867
443	# calculate new after	868	$self->{$tw} ||= AE::timer $after, 0, sub {
444	$after = $self->{timeout};	869	delete $self->{$tw};
		870	$cb->($self);
		871	};
		872	} else {
		873	delete $self->{$tw};
445	}	874	}
446
447	Scalar::Util::weaken $self;
448	return unless $self; # ->error could have destroyed $self
449
450	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
451	delete $self->{_tw};
452	$self->_timeout;
453	});
454	} else {
455	delete $self->{_tw};
456	}	875	}
457	}	876	}
458		877
459	#############################################################################	878	#############################################################################
460		879
…		…
467		886
468	The write queue is very simple: you can add data to its end, and	887	The write queue is very simple: you can add data to its end, and
469	AnyEvent::Handle will automatically try to get rid of it for you.	888	AnyEvent::Handle will automatically try to get rid of it for you.
470		889
471	When data could be written and the write buffer is shorter then the low	890	When data could be written and the write buffer is shorter then the low
472	water mark, the C<on_drain> callback will be invoked.	891	water mark, the C<on_drain> callback will be invoked once.
473		892
474	=over 4	893	=over 4
475		894
476	=item $handle->on_drain ($cb)	895	=item $handle->on_drain ($cb)
477		896
478	Sets the C<on_drain> callback or clears it (see the description of	897	Sets the C<on_drain> callback or clears it (see the description of
479	C<on_drain> in the constructor).	898	C<on_drain> in the constructor).
480		899
		900	This method may invoke callbacks (and therefore the handle might be
		901	destroyed after it returns).
		902
481	=cut	903	=cut
482		904
483	sub on_drain {	905	sub on_drain {
484	my ($self, $cb) = @_;	906	my ($self, $cb) = @_;
485		907
…		…
489	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});	911	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
490	}	912	}
491		913
492	=item $handle->push_write ($data)	914	=item $handle->push_write ($data)
493		915
494	Queues the given scalar to be written. You can push as much data as you	916	Queues the given scalar to be written. You can push as much data as
495	want (only limited by the available memory), as C<AnyEvent::Handle>	917	you want (only limited by the available memory and C<wbuf_max>), as
496	buffers it independently of the kernel.	918	C<AnyEvent::Handle> buffers it independently of the kernel.
		919
		920	This method may invoke callbacks (and therefore the handle might be
		921	destroyed after it returns).
497		922
498	=cut	923	=cut
499		924
500	sub _drain_wbuf {	925	sub _drain_wbuf {
501	my ($self) = @_;	926	my ($self) = @_;
…		…
505	Scalar::Util::weaken $self;	930	Scalar::Util::weaken $self;
506		931
507	my $cb = sub {	932	my $cb = sub {
508	my $len = syswrite $self->{fh}, $self->{wbuf};	933	my $len = syswrite $self->{fh}, $self->{wbuf};
509		934
510	if ($len >= 0) {	935	if (defined $len) {
511	substr $self->{wbuf}, 0, $len, "";	936	substr $self->{wbuf}, 0, $len, "";
512		937
513	$self->{_activity} = AnyEvent->now;	938	$self->{_activity} = $self->{_wactivity} = AE::now;
514		939
515	$self->{on_drain}($self)	940	$self->{on_drain}($self)
516	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})	941	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
517	&& $self->{on_drain};	942	&& $self->{on_drain};
518		943
…		…
524		949
525	# try to write data immediately	950	# try to write data immediately
526	$cb->() unless $self->{autocork};	951	$cb->() unless $self->{autocork};
527		952
528	# if still data left in wbuf, we need to poll	953	# if still data left in wbuf, we need to poll
529	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	954	$self->{_ww} = AE::io $self->{fh}, 1, $cb
530	if length $self->{wbuf};	955	if length $self->{wbuf};
		956
		957	if (
		958	defined $self->{wbuf_max}
		959	&& $self->{wbuf_max} < length $self->{wbuf}
		960	) {
		961	$self->_error (Errno::ENOSPC, 1), return;
		962	}
531	};	963	};
532	}	964	}
533		965
534	our %WH;	966	our %WH;
535		967
		968	# deprecated
536	sub register_write_type($$) {	969	sub register_write_type($$) {
537	$WH{$_[0]} = $_[1];	970	$WH{$_[0]} = $_[1];
538	}	971	}
539		972
540	sub push_write {	973	sub push_write {
541	my $self = shift;	974	my $self = shift;
542		975
543	if (@_ > 1) {	976	if (@_ > 1) {
544	my $type = shift;	977	my $type = shift;
545		978
		979	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
546	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	980	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
547	->($self, @_);	981	->($self, @_);
548	}	982	}
549		983
		984	# we downgrade here to avoid hard-to-track-down bugs,
		985	# and diagnose the problem earlier and better.
		986
550	if ($self->{tls}) {	987	if ($self->{tls}) {
551	$self->{_tls_wbuf} .= $_[0];	988	utf8::downgrade $self->{_tls_wbuf} .= $_[0];
552		989	&_dotls ($self) if $self->{fh};
553	&_dotls ($self);
554	} else {	990	} else {
555	$self->{wbuf} .= $_[0];	991	utf8::downgrade $self->{wbuf} .= $_[0];
556	$self->_drain_wbuf;	992	$self->_drain_wbuf if $self->{fh};
557	}	993	}
558	}	994	}
559		995
560	=item $handle->push_write (type => @args)	996	=item $handle->push_write (type => @args)
561		997
562	Instead of formatting your data yourself, you can also let this module do	998	Instead of formatting your data yourself, you can also let this module
563	the job by specifying a type and type-specific arguments.	999	do the job by specifying a type and type-specific arguments. You
		1000	can also specify the (fully qualified) name of a package, in which
		1001	case AnyEvent tries to load the package and then expects to find the
		1002	C<anyevent_write_type> function inside (see "custom write types", below).
564		1003
565	Predefined types are (if you have ideas for additional types, feel free to	1004	Predefined types are (if you have ideas for additional types, feel free to
566	drop by and tell us):	1005	drop by and tell us):
567		1006
568	=over 4	1007	=over 4
…		…
625	Other languages could read single lines terminated by a newline and pass	1064	Other languages could read single lines terminated by a newline and pass
626	this line into their JSON decoder of choice.	1065	this line into their JSON decoder of choice.
627		1066
628	=cut	1067	=cut
629		1068
		1069	sub json_coder() {
		1070	eval { require JSON::XS; JSON::XS->new->utf8 }
		1071	|| do { require JSON; JSON->new->utf8 }
		1072	}
		1073
630	register_write_type json => sub {	1074	register_write_type json => sub {
631	my ($self, $ref) = @_;	1075	my ($self, $ref) = @_;
632		1076
633	require JSON;	1077	my $json = $self->{json} ||= json_coder;
634		1078
635	$self->{json} ? $self->{json}->encode ($ref)	1079	$json->encode ($ref)
636	: JSON::encode_json ($ref)
637	};	1080	};
638		1081
639	=item storable => $reference	1082	=item storable => $reference
640		1083
641	Freezes the given reference using L<Storable> and writes it to the	1084	Freezes the given reference using L<Storable> and writes it to the
…		…
644	=cut	1087	=cut
645		1088
646	register_write_type storable => sub {	1089	register_write_type storable => sub {
647	my ($self, $ref) = @_;	1090	my ($self, $ref) = @_;
648		1091
649	require Storable;	1092	require Storable unless $Storable::VERSION;
650		1093
651	pack "w/a*", Storable::nfreeze ($ref)	1094	pack "w/a*", Storable::nfreeze ($ref)
652	};	1095	};
653		1096
654	=back	1097	=back
655		1098
656	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1099	=item $handle->push_shutdown
657		1100
658	This function (not method) lets you add your own types to C<push_write>.	1101	Sometimes you know you want to close the socket after writing your data
		1102	before it was actually written. One way to do that is to replace your
		1103	C<on_drain> handler by a callback that shuts down the socket (and set
		1104	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1105	replaces the C<on_drain> callback with:
		1106
		1107	sub { shutdown $_[0]{fh}, 1 }
		1108
		1109	This simply shuts down the write side and signals an EOF condition to the
		1110	the peer.
		1111
		1112	You can rely on the normal read queue and C<on_eof> handling
		1113	afterwards. This is the cleanest way to close a connection.
		1114
		1115	This method may invoke callbacks (and therefore the handle might be
		1116	destroyed after it returns).
		1117
		1118	=cut
		1119
		1120	sub push_shutdown {
		1121	my ($self) = @_;
		1122
		1123	delete $self->{low_water_mark};
		1124	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1125	}
		1126
		1127	=item custom write types - Package::anyevent_write_type $handle, @args
		1128
		1129	Instead of one of the predefined types, you can also specify the name of
		1130	a package. AnyEvent will try to load the package and then expects to find
		1131	a function named C<anyevent_write_type> inside. If it isn't found, it
		1132	progressively tries to load the parent package until it either finds the
		1133	function (good) or runs out of packages (bad).
		1134
659	Whenever the given C<type> is used, C<push_write> will invoke the code	1135	Whenever the given C<type> is used, C<push_write> will the function with
660	reference with the handle object and the remaining arguments.	1136	the handle object and the remaining arguments.
661		1137
662	The code reference is supposed to return a single octet string that will	1138	The function is supposed to return a single octet string that will be
663	be appended to the write buffer.	1139	appended to the write buffer, so you can mentally treat this function as a
		1140	"arguments to on-the-wire-format" converter.
664		1141
665	Note that this is a function, and all types registered this way will be	1142	Example: implement a custom write type C<join> that joins the remaining
666	global, so try to use unique names.	1143	arguments using the first one.
		1144
		1145	$handle->push_write (My::Type => " ", 1,2,3);
		1146
		1147	# uses the following package, which can be defined in the "My::Type" or in
		1148	# the "My" modules to be auto-loaded, or just about anywhere when the
		1149	# My::Type::anyevent_write_type is defined before invoking it.
		1150
		1151	package My::Type;
		1152
		1153	sub anyevent_write_type {
		1154	my ($handle, $delim, @args) = @_;
		1155
		1156	join $delim, @args
		1157	}
667		1158
668	=cut	1159	=cut
669		1160
670	#############################################################################	1161	#############################################################################
671		1162
…		…
680	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1171	ways, the "simple" way, using only C<on_read> and the "complex" way, using
681	a queue.	1172	a queue.
682		1173
683	In the simple case, you just install an C<on_read> callback and whenever	1174	In the simple case, you just install an C<on_read> callback and whenever
684	new data arrives, it will be called. You can then remove some data (if	1175	new data arrives, it will be called. You can then remove some data (if
685	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna	1176	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you can
686	leave the data there if you want to accumulate more (e.g. when only a	1177	leave the data there if you want to accumulate more (e.g. when only a
687	partial message has been received so far).	1178	partial message has been received so far), or change the read queue with
		1179	e.g. C<push_read>.
688		1180
689	In the more complex case, you want to queue multiple callbacks. In this	1181	In the more complex case, you want to queue multiple callbacks. In this
690	case, AnyEvent::Handle will call the first queued callback each time new	1182	case, AnyEvent::Handle will call the first queued callback each time new
691	data arrives (also the first time it is queued) and removes it when it has	1183	data arrives (also the first time it is queued) and remove it when it has
692	done its job (see C<push_read>, below).	1184	done its job (see C<push_read>, below).
693		1185
694	This way you can, for example, push three line-reads, followed by reading	1186	This way you can, for example, push three line-reads, followed by reading
695	a chunk of data, and AnyEvent::Handle will execute them in order.	1187	a chunk of data, and AnyEvent::Handle will execute them in order.
696		1188
…		…
753	=cut	1245	=cut
754		1246
755	sub _drain_rbuf {	1247	sub _drain_rbuf {
756	my ($self) = @_;	1248	my ($self) = @_;
757		1249
		1250	# avoid recursion
		1251	return if $self->{_skip_drain_rbuf};
758	local $self->{_in_drain} = 1;	1252	local $self->{_skip_drain_rbuf} = 1;
759
760	if (
761	defined $self->{rbuf_max}
762	&& $self->{rbuf_max} < length $self->{rbuf}
763	) {
764	$self->_error (&Errno::ENOSPC, 1), return;
765	}
766		1253
767	while () {	1254	while () {
768	# we need to use a separate tls read buffer, as we must not receive data while	1255	# we need to use a separate tls read buffer, as we must not receive data while
769	# we are draining the buffer, and this can only happen with TLS.	1256	# we are draining the buffer, and this can only happen with TLS.
770	$self->{rbuf} .= delete $self->{_tls_rbuf} if exists $self->{_tls_rbuf};	1257	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1258	if exists $self->{_tls_rbuf};
771		1259
772	my $len = length $self->{rbuf};	1260	my $len = length $self->{rbuf};
773		1261
774	if (my $cb = shift @{ $self->{_queue} }) {	1262	if (my $cb = shift @{ $self->{_queue} }) {
775	unless ($cb->($self)) {	1263	unless ($cb->($self)) {
776	if ($self->{_eof}) {	1264	# no progress can be made
777	# no progress can be made (not enough data and no data forthcoming)	1265	# (not enough data and no data forthcoming)
778	$self->_error (&Errno::EPIPE, 1), return;	1266	$self->_error (Errno::EPIPE, 1), return
779	}	1267	if $self->{_eof};
780		1268
781	unshift @{ $self->{_queue} }, $cb;	1269	unshift @{ $self->{_queue} }, $cb;
782	last;	1270	last;
783	}	1271	}
784	} elsif ($self->{on_read}) {	1272	} elsif ($self->{on_read}) {
…		…
791	&& !@{ $self->{_queue} } # and the queue is still empty	1279	&& !@{ $self->{_queue} } # and the queue is still empty
792	&& $self->{on_read} # but we still have on_read	1280	&& $self->{on_read} # but we still have on_read
793	) {	1281	) {
794	# no further data will arrive	1282	# no further data will arrive
795	# so no progress can be made	1283	# so no progress can be made
796	$self->_error (&Errno::EPIPE, 1), return	1284	$self->_error (Errno::EPIPE, 1), return
797	if $self->{_eof};	1285	if $self->{_eof};
798		1286
799	last; # more data might arrive	1287	last; # more data might arrive
800	}	1288	}
801	} else {	1289	} else {
…		…
804	last;	1292	last;
805	}	1293	}
806	}	1294	}
807		1295
808	if ($self->{_eof}) {	1296	if ($self->{_eof}) {
809	if ($self->{on_eof}) {	1297	$self->{on_eof}
810	$self->{on_eof}($self)	1298	? $self->{on_eof}($self)
811	} else {	1299	: $self->_error (0, 1, "Unexpected end-of-file");
812	$self->_error (0, 1);	1300
813	}	1301	return;
		1302	}
		1303
		1304	if (
		1305	defined $self->{rbuf_max}
		1306	&& $self->{rbuf_max} < length $self->{rbuf}
		1307	) {
		1308	$self->_error (Errno::ENOSPC, 1), return;
814	}	1309	}
815		1310
816	# may need to restart read watcher	1311	# may need to restart read watcher
817	unless ($self->{_rw}) {	1312	unless ($self->{_rw}) {
818	$self->start_read	1313	$self->start_read
…		…
824		1319
825	This replaces the currently set C<on_read> callback, or clears it (when	1320	This replaces the currently set C<on_read> callback, or clears it (when
826	the new callback is C<undef>). See the description of C<on_read> in the	1321	the new callback is C<undef>). See the description of C<on_read> in the
827	constructor.	1322	constructor.
828		1323
		1324	This method may invoke callbacks (and therefore the handle might be
		1325	destroyed after it returns).
		1326
829	=cut	1327	=cut
830		1328
831	sub on_read {	1329	sub on_read {
832	my ($self, $cb) = @_;	1330	my ($self, $cb) = @_;
833		1331
834	$self->{on_read} = $cb;	1332	$self->{on_read} = $cb;
835	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1333	$self->_drain_rbuf if $cb;
836	}	1334	}
837		1335
838	=item $handle->rbuf	1336	=item $handle->rbuf
839		1337
840	Returns the read buffer (as a modifiable lvalue).	1338	Returns the read buffer (as a modifiable lvalue). You can also access the
		1339	read buffer directly as the C<< ->{rbuf} >> member, if you want (this is
		1340	much faster, and no less clean).
841		1341
842	You can access the read buffer directly as the C<< ->{rbuf} >>	1342	The only operation allowed on the read buffer (apart from looking at it)
843	member, if you want. However, the only operation allowed on the	1343	is removing data from its beginning. Otherwise modifying or appending to
844	read buffer (apart from looking at it) is removing data from its	1344	it is not allowed and will lead to hard-to-track-down bugs.
845	beginning. Otherwise modifying or appending to it is not allowed and will
846	lead to hard-to-track-down bugs.
847		1345
848	NOTE: The read buffer should only be used or modified if the C<on_read>,	1346	NOTE: The read buffer should only be used or modified in the C<on_read>
849	C<push_read> or C<unshift_read> methods are used. The other read methods	1347	callback or when C<push_read> or C<unshift_read> are used with a single
850	automatically manage the read buffer.	1348	callback (i.e. untyped). Typed C<push_read> and C<unshift_read> methods
		1349	will manage the read buffer on their own.
851		1350
852	=cut	1351	=cut
853		1352
854	sub rbuf : lvalue {	1353	sub rbuf : lvalue {
855	$_[0]{rbuf}	1354	$_[0]{rbuf}
…		…
872		1371
873	If enough data was available, then the callback must remove all data it is	1372	If enough data was available, then the callback must remove all data it is
874	interested in (which can be none at all) and return a true value. After returning	1373	interested in (which can be none at all) and return a true value. After returning
875	true, it will be removed from the queue.	1374	true, it will be removed from the queue.
876		1375
		1376	These methods may invoke callbacks (and therefore the handle might be
		1377	destroyed after it returns).
		1378
877	=cut	1379	=cut
878		1380
879	our %RH;	1381	our %RH;
880		1382
881	sub register_read_type($$) {	1383	sub register_read_type($$) {
…		…
887	my $cb = pop;	1389	my $cb = pop;
888		1390
889	if (@_) {	1391	if (@_) {
890	my $type = shift;	1392	my $type = shift;
891		1393
		1394	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
892	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1395	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
893	->($self, $cb, @_);	1396	->($self, $cb, @_);
894	}	1397	}
895		1398
896	push @{ $self->{_queue} }, $cb;	1399	push @{ $self->{_queue} }, $cb;
897	$self->_drain_rbuf unless $self->{_in_drain};	1400	$self->_drain_rbuf;
898	}	1401	}
899		1402
900	sub unshift_read {	1403	sub unshift_read {
901	my $self = shift;	1404	my $self = shift;
902	my $cb = pop;	1405	my $cb = pop;
903		1406
904	if (@_) {	1407	if (@_) {
905	my $type = shift;	1408	my $type = shift;
906		1409
		1410	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
907	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1411	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::unshift_read")
908	->($self, $cb, @_);	1412	->($self, $cb, @_);
909	}	1413	}
910		1414
911
912	unshift @{ $self->{_queue} }, $cb;	1415	unshift @{ $self->{_queue} }, $cb;
913	$self->_drain_rbuf unless $self->{_in_drain};	1416	$self->_drain_rbuf;
914	}	1417	}
915		1418
916	=item $handle->push_read (type => @args, $cb)	1419	=item $handle->push_read (type => @args, $cb)
917		1420
918	=item $handle->unshift_read (type => @args, $cb)	1421	=item $handle->unshift_read (type => @args, $cb)
919		1422
920	Instead of providing a callback that parses the data itself you can chose	1423	Instead of providing a callback that parses the data itself you can chose
921	between a number of predefined parsing formats, for chunks of data, lines	1424	between a number of predefined parsing formats, for chunks of data, lines
922	etc.	1425	etc. You can also specify the (fully qualified) name of a package, in
		1426	which case AnyEvent tries to load the package and then expects to find the
		1427	C<anyevent_read_type> function inside (see "custom read types", below).
923		1428
924	Predefined types are (if you have ideas for additional types, feel free to	1429	Predefined types are (if you have ideas for additional types, feel free to
925	drop by and tell us):	1430	drop by and tell us):
926		1431
927	=over 4	1432	=over 4
…		…
933	data.	1438	data.
934		1439
935	Example: read 2 bytes.	1440	Example: read 2 bytes.
936		1441
937	$handle->push_read (chunk => 2, sub {	1442	$handle->push_read (chunk => 2, sub {
938	warn "yay ", unpack "H*", $_[1];	1443	say "yay " . unpack "H*", $_[1];
939	});	1444	});
940		1445
941	=cut	1446	=cut
942		1447
943	register_read_type chunk => sub {	1448	register_read_type chunk => sub {
…		…
977	if (@_ < 3) {	1482	if (@_ < 3) {
978	# this is more than twice as fast as the generic code below	1483	# this is more than twice as fast as the generic code below
979	sub {	1484	sub {
980	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;	1485	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
981		1486
982	$cb->($_[0], $1, $2);	1487	$cb->($_[0], "$1", "$2");
983	1	1488	1
984	}	1489	}
985	} else {	1490	} else {
986	$eol = quotemeta $eol unless ref $eol;	1491	$eol = quotemeta $eol unless ref $eol;
987	$eol = qr|^(.*?)($eol)|s;	1492	$eol = qr|^(.*?)($eol)|s;
988		1493
989	sub {	1494	sub {
990	$_[0]{rbuf} =~ s/$eol// or return;	1495	$_[0]{rbuf} =~ s/$eol// or return;
991		1496
992	$cb->($_[0], $1, $2);	1497	$cb->($_[0], "$1", "$2");
993	1	1498	1
994	}	1499	}
995	}	1500	}
996	};	1501	};
997		1502
…		…
1019	the receive buffer when neither C<$accept> nor C<$reject> match,	1524	the receive buffer when neither C<$accept> nor C<$reject> match,
1020	and everything preceding and including the match will be accepted	1525	and everything preceding and including the match will be accepted
1021	unconditionally. This is useful to skip large amounts of data that you	1526	unconditionally. This is useful to skip large amounts of data that you
1022	know cannot be matched, so that the C<$accept> or C<$reject> regex do not	1527	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
1023	have to start matching from the beginning. This is purely an optimisation	1528	have to start matching from the beginning. This is purely an optimisation
1024	and is usually worth only when you expect more than a few kilobytes.	1529	and is usually worth it only when you expect more than a few kilobytes.
1025		1530
1026	Example: expect a http header, which ends at C<\015\012\015\012>. Since we	1531	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
1027	expect the header to be very large (it isn't in practise, but...), we use	1532	expect the header to be very large (it isn't in practice, but...), we use
1028	a skip regex to skip initial portions. The skip regex is tricky in that	1533	a skip regex to skip initial portions. The skip regex is tricky in that
1029	it only accepts something not ending in either \015 or \012, as these are	1534	it only accepts something not ending in either \015 or \012, as these are
1030	required for the accept regex.	1535	required for the accept regex.
1031		1536
1032	$handle->push_read (regex =>	1537	$handle->push_read (regex =>
…		…
1045		1550
1046	sub {	1551	sub {
1047	# accept	1552	# accept
1048	if ($$rbuf =~ $accept) {	1553	if ($$rbuf =~ $accept) {
1049	$data .= substr $$rbuf, 0, $+[0], "";	1554	$data .= substr $$rbuf, 0, $+[0], "";
1050	$cb->($self, $data);	1555	$cb->($_[0], $data);
1051	return 1;	1556	return 1;
1052	}	1557	}
1053		1558
1054	# reject	1559	# reject
1055	if ($reject && $$rbuf =~ $reject) {	1560	if ($reject && $$rbuf =~ $reject) {
1056	$self->_error (&Errno::EBADMSG);	1561	$_[0]->_error (Errno::EBADMSG);
1057	}	1562	}
1058		1563
1059	# skip	1564	# skip
1060	if ($skip && $$rbuf =~ $skip) {	1565	if ($skip && $$rbuf =~ $skip) {
1061	$data .= substr $$rbuf, 0, $+[0], "";	1566	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1077	my ($self, $cb) = @_;	1582	my ($self, $cb) = @_;
1078		1583
1079	sub {	1584	sub {
1080	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1585	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1081	if ($_[0]{rbuf} =~ /[^0-9]/) {	1586	if ($_[0]{rbuf} =~ /[^0-9]/) {
1082	$self->_error (&Errno::EBADMSG);	1587	$_[0]->_error (Errno::EBADMSG);
1083	}	1588	}
1084	return;	1589	return;
1085	}	1590	}
1086		1591
1087	my $len = $1;	1592	my $len = $1;
1088		1593
1089	$self->unshift_read (chunk => $len, sub {	1594	$_[0]->unshift_read (chunk => $len, sub {
1090	my $string = $_[1];	1595	my $string = $_[1];
1091	$_[0]->unshift_read (chunk => 1, sub {	1596	$_[0]->unshift_read (chunk => 1, sub {
1092	if ($_[1] eq ",") {	1597	if ($_[1] eq ",") {
1093	$cb->($_[0], $string);	1598	$cb->($_[0], $string);
1094	} else {	1599	} else {
1095	$self->_error (&Errno::EBADMSG);	1600	$_[0]->_error (Errno::EBADMSG);
1096	}	1601	}
1097	});	1602	});
1098	});	1603	});
1099		1604
1100	1	1605	1
…		…
1167	=cut	1672	=cut
1168		1673
1169	register_read_type json => sub {	1674	register_read_type json => sub {
1170	my ($self, $cb) = @_;	1675	my ($self, $cb) = @_;
1171		1676
1172	require JSON;	1677	my $json = $self->{json} ||= json_coder;
1173		1678
1174	my $data;	1679	my $data;
1175	my $rbuf = \$self->{rbuf};	1680	my $rbuf = \$self->{rbuf};
1176		1681
1177	my $json = $self->{json} ||= JSON->new->utf8;
1178
1179	sub {	1682	sub {
1180	my $ref = eval { $json->incr_parse ($self->{rbuf}) };	1683	my $ref = eval { $json->incr_parse ($_[0]{rbuf}) };
1181		1684
1182	if ($ref) {	1685	if ($ref) {
1183	$self->{rbuf} = $json->incr_text;	1686	$_[0]{rbuf} = $json->incr_text;
1184	$json->incr_text = "";	1687	$json->incr_text = "";
1185	$cb->($self, $ref);	1688	$cb->($_[0], $ref);
1186		1689
1187	1	1690	1
1188	} elsif ($@) {	1691	} elsif ($@) {
1189	# error case	1692	# error case
1190	$json->incr_skip;	1693	$json->incr_skip;
1191		1694
1192	$self->{rbuf} = $json->incr_text;	1695	$_[0]{rbuf} = $json->incr_text;
1193	$json->incr_text = "";	1696	$json->incr_text = "";
1194		1697
1195	$self->_error (&Errno::EBADMSG);	1698	$_[0]->_error (Errno::EBADMSG);
1196		1699
1197	()	1700	()
1198	} else {	1701	} else {
1199	$self->{rbuf} = "";	1702	$_[0]{rbuf} = "";
1200		1703
1201	()	1704	()
1202	}	1705	}
1203	}	1706	}
1204	};	1707	};
…		…
1214	=cut	1717	=cut
1215		1718
1216	register_read_type storable => sub {	1719	register_read_type storable => sub {
1217	my ($self, $cb) = @_;	1720	my ($self, $cb) = @_;
1218		1721
1219	require Storable;	1722	require Storable unless $Storable::VERSION;
1220		1723
1221	sub {	1724	sub {
1222	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1725	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1223	defined (my $len = eval { unpack "w", $_[0]{rbuf} })	1726	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
1224	or return;	1727	or return;
…		…
1237	# read remaining chunk	1740	# read remaining chunk
1238	$_[0]->unshift_read (chunk => $len, sub {	1741	$_[0]->unshift_read (chunk => $len, sub {
1239	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1742	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1240	$cb->($_[0], $ref);	1743	$cb->($_[0], $ref);
1241	} else {	1744	} else {
1242	$self->_error (&Errno::EBADMSG);	1745	$_[0]->_error (Errno::EBADMSG);
1243	}	1746	}
1244	});	1747	});
1245	}	1748	}
1246		1749
1247	1	1750	1
1248	}	1751	}
1249	};	1752	};
1250		1753
1251	=back	1754	=back
1252		1755
1253	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1756	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1254		1757
1255	This function (not method) lets you add your own types to C<push_read>.	1758	Instead of one of the predefined types, you can also specify the name
		1759	of a package. AnyEvent will try to load the package and then expects to
		1760	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1761	progressively tries to load the parent package until it either finds the
		1762	function (good) or runs out of packages (bad).
1256		1763
1257	Whenever the given C<type> is used, C<push_read> will invoke the code	1764	Whenever this type is used, C<push_read> will invoke the function with the
1258	reference with the handle object, the callback and the remaining	1765	handle object, the original callback and the remaining arguments.
1259	arguments.
1260		1766
1261	The code reference is supposed to return a callback (usually a closure)	1767	The function is supposed to return a callback (usually a closure) that
1262	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1768	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1769	mentally treat the function as a "configurable read type to read callback"
		1770	converter.
1263		1771
1264	It should invoke the passed callback when it is done reading (remember to	1772	It should invoke the original callback when it is done reading (remember
1265	pass C<$handle> as first argument as all other callbacks do that).	1773	to pass C<$handle> as first argument as all other callbacks do that,
		1774	although there is no strict requirement on this).
1266		1775
1267	Note that this is a function, and all types registered this way will be
1268	global, so try to use unique names.
1269
1270	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1776	For examples, see the source of this module (F<perldoc -m
1271	search for C<register_read_type>)).	1777	AnyEvent::Handle>, search for C<register_read_type>)).
1272		1778
1273	=item $handle->stop_read	1779	=item $handle->stop_read
1274		1780
1275	=item $handle->start_read	1781	=item $handle->start_read
1276		1782
…		…
1282	Note that AnyEvent::Handle will automatically C<start_read> for you when	1788	Note that AnyEvent::Handle will automatically C<start_read> for you when
1283	you change the C<on_read> callback or push/unshift a read callback, and it	1789	you change the C<on_read> callback or push/unshift a read callback, and it
1284	will automatically C<stop_read> for you when neither C<on_read> is set nor	1790	will automatically C<stop_read> for you when neither C<on_read> is set nor
1285	there are any read requests in the queue.	1791	there are any read requests in the queue.
1286		1792
1287	These methods will have no effect when in TLS mode (as TLS doesn't support	1793	In older versions of this module (<= 5.3), these methods had no effect,
1288	half-duplex connections).	1794	as TLS does not support half-duplex connections. In current versions they
		1795	work as expected, as this behaviour is required to avoid certain resource
		1796	attacks, where the program would be forced to read (and buffer) arbitrary
		1797	amounts of data before being able to send some data. The drawback is that
		1798	some readings of the the SSL/TLS specifications basically require this
		1799	attack to be working, as SSL/TLS implementations might stall sending data
		1800	during a rehandshake.
		1801
		1802	As a guideline, during the initial handshake, you should not stop reading,
		1803	and as a client, it might cause problems, depending on your application.
1289		1804
1290	=cut	1805	=cut
1291		1806
1292	sub stop_read {	1807	sub stop_read {
1293	my ($self) = @_;	1808	my ($self) = @_;
1294		1809
1295	delete $self->{_rw} unless $self->{tls};	1810	delete $self->{_rw};
1296	}	1811	}
1297		1812
1298	sub start_read {	1813	sub start_read {
1299	my ($self) = @_;	1814	my ($self) = @_;
1300		1815
1301	unless ($self->{_rw} || $self->{_eof}) {	1816	unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
1302	Scalar::Util::weaken $self;	1817	Scalar::Util::weaken $self;
1303		1818
1304	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1819	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1305	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});	1820	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1306	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1821	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size}, length $$rbuf;
1307		1822
1308	if ($len > 0) {	1823	if ($len > 0) {
1309	$self->{_activity} = AnyEvent->now;	1824	$self->{_activity} = $self->{_ractivity} = AE::now;
1310		1825
1311	if ($self->{tls}) {	1826	if ($self->{tls}) {
1312	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);	1827	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1313		1828
1314	&_dotls ($self);	1829	&_dotls ($self);
1315	} else {	1830	} else {
1316	$self->_drain_rbuf unless $self->{_in_drain};	1831	$self->_drain_rbuf;
		1832	}
		1833
		1834	if ($len == $self->{read_size}) {
		1835	$self->{read_size} *= 2;
		1836	$self->{read_size} = $self->{max_read_size} || MAX_READ_SIZE
		1837	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
1317	}	1838	}
1318		1839
1319	} elsif (defined $len) {	1840	} elsif (defined $len) {
1320	delete $self->{_rw};	1841	delete $self->{_rw};
1321	$self->{_eof} = 1;	1842	$self->{_eof} = 1;
1322	$self->_drain_rbuf unless $self->{_in_drain};	1843	$self->_drain_rbuf;
1323		1844
1324	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1845	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1325	return $self->_error ($!, 1);	1846	return $self->_error ($!, 1);
1326	}	1847	}
1327	});	1848	};
		1849	}
		1850	}
		1851
		1852	our $ERROR_SYSCALL;
		1853	our $ERROR_WANT_READ;
		1854
		1855	sub _tls_error {
		1856	my ($self, $err) = @_;
		1857
		1858	return $self->_error ($!, 1)
		1859	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1860
		1861	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1862
		1863	# reduce error string to look less scary
		1864	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1865
		1866	if ($self->{_on_starttls}) {
		1867	(delete $self->{_on_starttls})->($self, undef, $err);
		1868	&_freetls;
		1869	} else {
		1870	&_freetls;
		1871	$self->_error (Errno::EPROTO, 1, $err);
1328	}	1872	}
1329	}	1873	}
1330		1874
1331	# poll the write BIO and send the data if applicable	1875	# poll the write BIO and send the data if applicable
		1876	# also decode read data if possible
		1877	# this is basiclaly our TLS state machine
		1878	# more efficient implementations are possible with openssl,
		1879	# but not with the buggy and incomplete Net::SSLeay.
1332	sub _dotls {	1880	sub _dotls {
1333	my ($self) = @_;	1881	my ($self) = @_;
1334		1882
1335	my $tmp;	1883	my $tmp;
1336		1884
1337	if (length $self->{_tls_wbuf}) {	1885	if (length $self->{_tls_wbuf}) {
1338	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1886	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1339	substr $self->{_tls_wbuf}, 0, $tmp, "";	1887	substr $self->{_tls_wbuf}, 0, $tmp, "";
1340	}	1888	}
		1889
		1890	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1891	return $self->_tls_error ($tmp)
		1892	if $tmp != $ERROR_WANT_READ
		1893	&& ($tmp != $ERROR_SYSCALL || $!);
1341	}	1894	}
1342		1895
1343	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {	1896	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
1344	unless (length $tmp) {	1897	unless (length $tmp) {
1345	# let's treat SSL-eof as we treat normal EOF	1898	$self->{_on_starttls}
1346	delete $self->{_rw};	1899	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
1347	$self->{_eof} = 1;
1348	&_freetls;	1900	&_freetls;
		1901
		1902	if ($self->{on_stoptls}) {
		1903	$self->{on_stoptls}($self);
		1904	return;
		1905	} else {
		1906	# let's treat SSL-eof as we treat normal EOF
		1907	delete $self->{_rw};
		1908	$self->{_eof} = 1;
		1909	}
1349	}	1910	}
1350		1911
1351	$self->{_tls_rbuf} .= $tmp;	1912	$self->{_tls_rbuf} .= $tmp;
1352	$self->_drain_rbuf unless $self->{_in_drain};	1913	$self->_drain_rbuf;
1353	$self->{tls} or return; # tls session might have gone away in callback	1914	$self->{tls} or return; # tls session might have gone away in callback
1354	}	1915	}
1355		1916
1356	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);	1917	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
1357
1358	if ($tmp != Net::SSLeay::ERROR_WANT_READ ()) {
1359	if ($tmp == Net::SSLeay::ERROR_SYSCALL ()) {
1360	return $self->_error ($!, 1);	1918	return $self->_tls_error ($tmp)
1361	} elsif ($tmp == Net::SSLeay::ERROR_SSL ()) {	1919	if $tmp != $ERROR_WANT_READ
1362	return $self->_error (&Errno::EIO, 1);	1920	&& ($tmp != $ERROR_SYSCALL || $!);
1363	}
1364
1365	# all other errors are fine for our purposes
1366	}
1367		1921
1368	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1922	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1369	$self->{wbuf} .= $tmp;	1923	$self->{wbuf} .= $tmp;
1370	$self->_drain_wbuf;	1924	$self->_drain_wbuf;
		1925	$self->{tls} or return; # tls session might have gone away in callback
1371	}	1926	}
		1927
		1928	$self->{_on_starttls}
		1929	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
		1930	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1372	}	1931	}
1373		1932
1374	=item $handle->starttls ($tls[, $tls_ctx])	1933	=item $handle->starttls ($tls[, $tls_ctx])
1375		1934
1376	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1935	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1377	object is created, you can also do that at a later time by calling	1936	object is created, you can also do that at a later time by calling
1378	C<starttls>.	1937	C<starttls>.
1379		1938
		1939	Starting TLS is currently an asynchronous operation - when you push some
		1940	write data and then call C<< ->starttls >> then TLS negotiation will start
		1941	immediately, after which the queued write data is then sent.
		1942
1380	The first argument is the same as the C<tls> constructor argument (either	1943	The first argument is the same as the C<tls> constructor argument (either
1381	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1944	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1382		1945
1383	The second argument is the optional C<Net::SSLeay::CTX> object that is	1946	The second argument is the optional C<AnyEvent::TLS> object that is used
1384	used when AnyEvent::Handle has to create its own TLS connection object.	1947	when AnyEvent::Handle has to create its own TLS connection object, or
		1948	a hash reference with C<< key => value >> pairs that will be used to
		1949	construct a new context.
1385		1950
1386	The TLS connection object will end up in C<< $handle->{tls} >> after this	1951	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1387	call and can be used or changed to your liking. Note that the handshake	1952	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1388	might have already started when this function returns.	1953	changed to your liking. Note that the handshake might have already started
		1954	when this function returns.
1389		1955
1390	If it an error to start a TLS handshake more than once per	1956	Due to bugs in OpenSSL, it might or might not be possible to do multiple
1391	AnyEvent::Handle object (this is due to bugs in OpenSSL).	1957	handshakes on the same stream. It is best to not attempt to use the
		1958	stream after stopping TLS.
1392		1959
		1960	This method may invoke callbacks (and therefore the handle might be
		1961	destroyed after it returns).
		1962
1393	=cut	1963	=cut
		1964
		1965	our %TLS_CACHE; #TODO not yet documented, should we?
1394		1966
1395	sub starttls {	1967	sub starttls {
1396	my ($self, $ssl, $ctx) = @_;	1968	my ($self, $tls, $ctx) = @_;
		1969
		1970	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1971	if $self->{tls};
		1972
		1973	$self->{tls} = $tls;
		1974	$self->{tls_ctx} = $ctx if @_ > 2;
		1975
		1976	return unless $self->{fh};
1397		1977
1398	require Net::SSLeay;	1978	require Net::SSLeay;
1399		1979
1400	Carp::croak "it is an error to call starttls more than once on an AnyEvent::Handle object"	1980	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
1401	if $self->{tls};	1981	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1982
		1983	$tls = delete $self->{tls};
		1984	$ctx = $self->{tls_ctx};
		1985
		1986	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1987
		1988	if ("HASH" eq ref $ctx) {
		1989	require AnyEvent::TLS;
		1990
		1991	if ($ctx->{cache}) {
		1992	my $key = $ctx+0;
		1993	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1994	} else {
		1995	$ctx = new AnyEvent::TLS %$ctx;
		1996	}
		1997	}
1402		1998
1403	if ($ssl eq "accept") {	1999	$self->{tls_ctx} = $ctx || TLS_CTX ();
1404	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	2000	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1405	Net::SSLeay::set_accept_state ($ssl);
1406	} elsif ($ssl eq "connect") {
1407	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());
1408	Net::SSLeay::set_connect_state ($ssl);
1409	}
1410
1411	$self->{tls} = $ssl;
1412		2001
1413	# basically, this is deep magic (because SSL_read should have the same issues)	2002	# basically, this is deep magic (because SSL_read should have the same issues)
1414	# but the openssl maintainers basically said: "trust us, it just works".	2003	# but the openssl maintainers basically said: "trust us, it just works".
1415	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	2004	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1416	# and mismaintained ssleay-module doesn't even offer them).	2005	# and mismaintained ssleay-module doesn't even offer them).
…		…
1420	#	2009	#
1421	# note that we do not try to keep the length constant between writes as we are required to do.	2010	# note that we do not try to keep the length constant between writes as we are required to do.
1422	# we assume that most (but not all) of this insanity only applies to non-blocking cases,	2011	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
1423	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to	2012	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
1424	# have identity issues in that area.	2013	# have identity issues in that area.
1425	Net::SSLeay::CTX_set_mode ($self->{tls},	2014	# Net::SSLeay::CTX_set_mode ($ssl,
1426	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	2015	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1427	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	2016	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		2017	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1428		2018
1429	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	2019	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1430	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	2020	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1431		2021
		2022	Net::SSLeay::BIO_write ($self->{_rbio}, $self->{rbuf});
		2023	$self->{rbuf} = "";
		2024
1432	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	2025	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
		2026
		2027	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
		2028	if $self->{on_starttls};
1433		2029
1434	&_dotls; # need to trigger the initial handshake	2030	&_dotls; # need to trigger the initial handshake
1435	$self->start_read; # make sure we actually do read	2031	$self->start_read; # make sure we actually do read
1436	}	2032	}
1437		2033
1438	=item $handle->stoptls	2034	=item $handle->stoptls
1439		2035
1440	Shuts down the SSL connection - this makes a proper EOF handshake by	2036	Shuts down the SSL connection - this makes a proper EOF handshake by
1441	sending a close notify to the other side, but since OpenSSL doesn't	2037	sending a close notify to the other side, but since OpenSSL doesn't
1442	support non-blocking shut downs, it is not possible to re-use the stream	2038	support non-blocking shut downs, it is not guaranteed that you can re-use
1443	afterwards.	2039	the stream afterwards.
		2040
		2041	This method may invoke callbacks (and therefore the handle might be
		2042	destroyed after it returns).
1444		2043
1445	=cut	2044	=cut
1446		2045
1447	sub stoptls {	2046	sub stoptls {
1448	my ($self) = @_;	2047	my ($self) = @_;
1449		2048
1450	if ($self->{tls}) {	2049	if ($self->{tls} && $self->{fh}) {
1451	Net::SSLeay::shutdown ($self->{tls});	2050	Net::SSLeay::shutdown ($self->{tls});
1452		2051
1453	&_dotls;	2052	&_dotls;
1454		2053
1455	# we don't give a shit. no, we do, but we can't. no...	2054	# # we don't give a shit. no, we do, but we can't. no...#d#
1456	# we, we... have to use openssl :/	2055	# # we, we... have to use openssl :/#d#
1457	&_freetls;	2056	# &_freetls;#d#
1458	}	2057	}
1459	}	2058	}
1460		2059
1461	sub _freetls {	2060	sub _freetls {
1462	my ($self) = @_;	2061	my ($self) = @_;
1463		2062
1464	return unless $self->{tls};	2063	return unless $self->{tls};
1465		2064
1466	Net::SSLeay::free (delete $self->{tls});	2065	$self->{tls_ctx}->_put_session (delete $self->{tls})
		2066	if $self->{tls} > 0;
1467		2067
1468	delete @$self{qw(_rbio _wbio _tls_wbuf)};	2068	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1469	}	2069	}
		2070
		2071	=item $handle->resettls
		2072
		2073	This rarely-used method simply resets and TLS state on the handle, usually
		2074	causing data loss.
		2075
		2076	One case where it may be useful is when you want to skip over the data in
		2077	the stream but you are not interested in interpreting it, so data loss is
		2078	no concern.
		2079
		2080	=cut
		2081
		2082	*resettls = \&_freetls;
1470		2083
1471	sub DESTROY {	2084	sub DESTROY {
1472	my ($self) = @_;	2085	my ($self) = @_;
1473		2086
1474	&_freetls;	2087	&_freetls;
1475		2088
1476	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	2089	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1477		2090
1478	if ($linger && length $self->{wbuf}) {	2091	if ($linger && length $self->{wbuf} && $self->{fh}) {
1479	my $fh = delete $self->{fh};	2092	my $fh = delete $self->{fh};
1480	my $wbuf = delete $self->{wbuf};	2093	my $wbuf = delete $self->{wbuf};
1481		2094
1482	my @linger;	2095	my @linger;
1483		2096
1484	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	2097	push @linger, AE::io $fh, 1, sub {
1485	my $len = syswrite $fh, $wbuf, length $wbuf;	2098	my $len = syswrite $fh, $wbuf, length $wbuf;
1486		2099
1487	if ($len > 0) {	2100	if ($len > 0) {
1488	substr $wbuf, 0, $len, "";	2101	substr $wbuf, 0, $len, "";
1489	} else {	2102	} elsif (defined $len || ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK)) {
1490	@linger = (); # end	2103	@linger = (); # end
1491	}	2104	}
1492	});	2105	};
1493	push @linger, AnyEvent->timer (after => $linger, cb => sub {	2106	push @linger, AE::timer $linger, 0, sub {
1494	@linger = ();	2107	@linger = ();
1495	});	2108	};
1496	}	2109	}
1497	}	2110	}
1498		2111
1499	=item $handle->destroy	2112	=item $handle->destroy
1500		2113
1501	Shuts down the handle object as much as possible - this call ensures that	2114	Shuts down the handle object as much as possible - this call ensures that
1502	no further callbacks will be invoked and resources will be freed as much	2115	no further callbacks will be invoked and as many resources as possible
1503	as possible. You must not call any methods on the object afterwards.	2116	will be freed. Any method you will call on the handle object after
		2117	destroying it in this way will be silently ignored (and it will return the
		2118	empty list).
1504		2119
1505	Normally, you can just "forget" any references to an AnyEvent::Handle	2120	Normally, you can just "forget" any references to an AnyEvent::Handle
1506	object and it will simply shut down. This works in fatal error and EOF	2121	object and it will simply shut down. This works in fatal error and EOF
1507	callbacks, as well as code outside. It does I<NOT> work in a read or write	2122	callbacks, as well as code outside. It does I<NOT> work in a read or write
1508	callback, so when you want to destroy the AnyEvent::Handle object from	2123	callback, so when you want to destroy the AnyEvent::Handle object from
1509	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in	2124	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
1510	that case.	2125	that case.
1511		2126
		2127	Destroying the handle object in this way has the advantage that callbacks
		2128	will be removed as well, so if those are the only reference holders (as
		2129	is common), then one doesn't need to do anything special to break any
		2130	reference cycles.
		2131
1512	The handle might still linger in the background and write out remaining	2132	The handle might still linger in the background and write out remaining
1513	data, as specified by the C<linger> option, however.	2133	data, as specified by the C<linger> option, however.
1514		2134
1515	=cut	2135	=cut
1516		2136
1517	sub destroy {	2137	sub destroy {
1518	my ($self) = @_;	2138	my ($self) = @_;
1519		2139
1520	$self->DESTROY;	2140	$self->DESTROY;
1521	%$self = ();	2141	%$self = ();
		2142	bless $self, "AnyEvent::Handle::destroyed";
1522	}	2143	}
		2144
		2145	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2146	#nop
		2147	}
		2148
		2149	=item $handle->destroyed
		2150
		2151	Returns false as long as the handle hasn't been destroyed by a call to C<<
		2152	->destroy >>, true otherwise.
		2153
		2154	Can be useful to decide whether the handle is still valid after some
		2155	callback possibly destroyed the handle. For example, C<< ->push_write >>,
		2156	C<< ->starttls >> and other methods can call user callbacks, which in turn
		2157	can destroy the handle, so work can be avoided by checking sometimes:
		2158
		2159	$hdl->starttls ("accept");
		2160	return if $hdl->destroyed;
		2161	$hdl->push_write (...
		2162
		2163	Note that the call to C<push_write> will silently be ignored if the handle
		2164	has been destroyed, so often you can just ignore the possibility of the
		2165	handle being destroyed.
		2166
		2167	=cut
		2168
		2169	sub destroyed { 0 }
		2170	sub AnyEvent::Handle::destroyed::destroyed { 1 }
1523		2171
1524	=item AnyEvent::Handle::TLS_CTX	2172	=item AnyEvent::Handle::TLS_CTX
1525		2173
1526	This function creates and returns the Net::SSLeay::CTX object used by	2174	This function creates and returns the AnyEvent::TLS object used by default
1527	default for TLS mode.	2175	for TLS mode.
1528		2176
1529	The context is created like this:	2177	The context is created by calling L<AnyEvent::TLS> without any arguments.
1530
1531	Net::SSLeay::load_error_strings;
1532	Net::SSLeay::SSLeay_add_ssl_algorithms;
1533	Net::SSLeay::randomize;
1534
1535	my $CTX = Net::SSLeay::CTX_new;
1536
1537	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1538		2178
1539	=cut	2179	=cut
1540		2180
1541	our $TLS_CTX;	2181	our $TLS_CTX;
1542		2182
1543	sub TLS_CTX() {	2183	sub TLS_CTX() {
1544	$TLS_CTX || do {	2184	$TLS_CTX ||= do {
1545	require Net::SSLeay;	2185	require AnyEvent::TLS;
1546		2186
1547	Net::SSLeay::load_error_strings ();	2187	new AnyEvent::TLS
1548	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1549	Net::SSLeay::randomize ();
1550
1551	$TLS_CTX = Net::SSLeay::CTX_new ();
1552
1553	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1554
1555	$TLS_CTX
1556	}	2188	}
1557	}	2189	}
1558		2190
1559	=back	2191	=back
1560		2192
…		…
1571		2203
1572	It is only safe to "forget" the reference inside EOF or error callbacks,	2204	It is only safe to "forget" the reference inside EOF or error callbacks,
1573	from within all other callbacks, you need to explicitly call the C<<	2205	from within all other callbacks, you need to explicitly call the C<<
1574	->destroy >> method.	2206	->destroy >> method.
1575		2207
		2208	=item Why is my C<on_eof> callback never called?
		2209
		2210	Probably because your C<on_error> callback is being called instead: When
		2211	you have outstanding requests in your read queue, then an EOF is
		2212	considered an error as you clearly expected some data.
		2213
		2214	To avoid this, make sure you have an empty read queue whenever your handle
		2215	is supposed to be "idle" (i.e. connection closes are O.K.). You can set
		2216	an C<on_read> handler that simply pushes the first read requests in the
		2217	queue.
		2218
		2219	See also the next question, which explains this in a bit more detail.
		2220
		2221	=item How can I serve requests in a loop?
		2222
		2223	Most protocols consist of some setup phase (authentication for example)
		2224	followed by a request handling phase, where the server waits for requests
		2225	and handles them, in a loop.
		2226
		2227	There are two important variants: The first (traditional, better) variant
		2228	handles requests until the server gets some QUIT command, causing it to
		2229	close the connection first (highly desirable for a busy TCP server). A
		2230	client dropping the connection is an error, which means this variant can
		2231	detect an unexpected detection close.
		2232
		2233	To handle this case, always make sure you have a on-empty read queue, by
		2234	pushing the "read request start" handler on it:
		2235
		2236	# we assume a request starts with a single line
		2237	my @start_request; @start_request = (line => sub {
		2238	my ($hdl, $line) = @_;
		2239
		2240	... handle request
		2241
		2242	# push next request read, possibly from a nested callback
		2243	$hdl->push_read (@start_request);
		2244	});
		2245
		2246	# auth done, now go into request handling loop
		2247	# now push the first @start_request
		2248	$hdl->push_read (@start_request);
		2249
		2250	By always having an outstanding C<push_read>, the handle always expects
		2251	some data and raises the C<EPIPE> error when the connction is dropped
		2252	unexpectedly.
		2253
		2254	The second variant is a protocol where the client can drop the connection
		2255	at any time. For TCP, this means that the server machine may run out of
		2256	sockets easier, and in general, it means you cannot distinguish a protocl
		2257	failure/client crash from a normal connection close. Nevertheless, these
		2258	kinds of protocols are common (and sometimes even the best solution to the
		2259	problem).
		2260
		2261	Having an outstanding read request at all times is possible if you ignore
		2262	C<EPIPE> errors, but this doesn't help with when the client drops the
		2263	connection during a request, which would still be an error.
		2264
		2265	A better solution is to push the initial request read in an C<on_read>
		2266	callback. This avoids an error, as when the server doesn't expect data
		2267	(i.e. is idly waiting for the next request, an EOF will not raise an
		2268	error, but simply result in an C<on_eof> callback. It is also a bit slower
		2269	and simpler:
		2270
		2271	# auth done, now go into request handling loop
		2272	$hdl->on_read (sub {
		2273	my ($hdl) = @_;
		2274
		2275	# called each time we receive data but the read queue is empty
		2276	# simply start read the request
		2277
		2278	$hdl->push_read (line => sub {
		2279	my ($hdl, $line) = @_;
		2280
		2281	... handle request
		2282
		2283	# do nothing special when the request has been handled, just
		2284	# let the request queue go empty.
		2285	});
		2286	});
		2287
1576	=item I get different callback invocations in TLS mode/Why can't I pause	2288	=item I get different callback invocations in TLS mode/Why can't I pause
1577	reading?	2289	reading?
1578		2290
1579	Unlike, say, TCP, TLS connections do not consist of two independent	2291	Unlike, say, TCP, TLS connections do not consist of two independent
1580	communication channels, one for each direction. Or put differently. The	2292	communication channels, one for each direction. Or put differently, the
1581	read and write directions are not independent of each other: you cannot	2293	read and write directions are not independent of each other: you cannot
1582	write data unless you are also prepared to read, and vice versa.	2294	write data unless you are also prepared to read, and vice versa.
1583		2295
1584	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>	2296	This means that, in TLS mode, you might get C<on_error> or C<on_eof>
1585	callback invocations when you are not expecting any read data - the reason	2297	callback invocations when you are not expecting any read data - the reason
1586	is that AnyEvent::Handle always reads in TLS mode.	2298	is that AnyEvent::Handle always reads in TLS mode.
1587		2299
1588	During the connection, you have to make sure that you always have a	2300	During the connection, you have to make sure that you always have a
1589	non-empty read-queue, or an C<on_read> watcher. At the end of the	2301	non-empty read-queue, or an C<on_read> watcher. At the end of the
…		…
1599		2311
1600	$handle->on_read (sub { });	2312	$handle->on_read (sub { });
1601	$handle->on_eof (undef);	2313	$handle->on_eof (undef);
1602	$handle->on_error (sub {	2314	$handle->on_error (sub {
1603	my $data = delete $_[0]{rbuf};	2315	my $data = delete $_[0]{rbuf};
1604	undef $handle;
1605	});	2316	});
		2317
		2318	Note that this example removes the C<rbuf> member from the handle object,
		2319	which is not normally allowed by the API. It is expressly permitted in
		2320	this case only, as the handle object needs to be destroyed afterwards.
1606		2321
1607	The reason to use C<on_error> is that TCP connections, due to latencies	2322	The reason to use C<on_error> is that TCP connections, due to latencies
1608	and packets loss, might get closed quite violently with an error, when in	2323	and packets loss, might get closed quite violently with an error, when in
1609	fact, all data has been received.	2324	fact all data has been received.
1610		2325
1611	It is usually better to use acknowledgements when transferring data,	2326	It is usually better to use acknowledgements when transferring data,
1612	to make sure the other side hasn't just died and you got the data	2327	to make sure the other side hasn't just died and you got the data
1613	intact. This is also one reason why so many internet protocols have an	2328	intact. This is also one reason why so many internet protocols have an
1614	explicit QUIT command.	2329	explicit QUIT command.
…		…
1621	C<low_water_mark> this will be called precisely when all data has been	2336	C<low_water_mark> this will be called precisely when all data has been
1622	written to the socket:	2337	written to the socket:
1623		2338
1624	$handle->push_write (...);	2339	$handle->push_write (...);
1625	$handle->on_drain (sub {	2340	$handle->on_drain (sub {
1626	warn "all data submitted to the kernel\n";	2341	AE::log debug => "All data submitted to the kernel.";
1627	undef $handle;	2342	undef $handle;
1628	});	2343	});
1629		2344
		2345	If you just want to queue some data and then signal EOF to the other side,
		2346	consider using C<< ->push_shutdown >> instead.
		2347
		2348	=item I want to contact a TLS/SSL server, I don't care about security.
		2349
		2350	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2351	connect to it and then create the AnyEvent::Handle with the C<tls>
		2352	parameter:
		2353
		2354	tcp_connect $host, $port, sub {
		2355	my ($fh) = @_;
		2356
		2357	my $handle = new AnyEvent::Handle
		2358	fh => $fh,
		2359	tls => "connect",
		2360	on_error => sub { ... };
		2361
		2362	$handle->push_write (...);
		2363	};
		2364
		2365	=item I want to contact a TLS/SSL server, I do care about security.
		2366
		2367	Then you should additionally enable certificate verification, including
		2368	peername verification, if the protocol you use supports it (see
		2369	L<AnyEvent::TLS>, C<verify_peername>).
		2370
		2371	E.g. for HTTPS:
		2372
		2373	tcp_connect $host, $port, sub {
		2374	my ($fh) = @_;
		2375
		2376	my $handle = new AnyEvent::Handle
		2377	fh => $fh,
		2378	peername => $host,
		2379	tls => "connect",
		2380	tls_ctx => { verify => 1, verify_peername => "https" },
		2381	...
		2382
		2383	Note that you must specify the hostname you connected to (or whatever
		2384	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2385	peername verification will be done.
		2386
		2387	The above will use the system-dependent default set of trusted CA
		2388	certificates. If you want to check against a specific CA, add the
		2389	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2390
		2391	tls_ctx => {
		2392	verify => 1,
		2393	verify_peername => "https",
		2394	ca_file => "my-ca-cert.pem",
		2395	},
		2396
		2397	=item I want to create a TLS/SSL server, how do I do that?
		2398
		2399	Well, you first need to get a server certificate and key. You have
		2400	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2401	self-signed certificate (cheap. check the search engine of your choice,
		2402	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2403	nice program for that purpose).
		2404
		2405	Then create a file with your private key (in PEM format, see
		2406	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2407	file should then look like this:
		2408
		2409	-----BEGIN RSA PRIVATE KEY-----
		2410	...header data
		2411	... lots of base64'y-stuff
		2412	-----END RSA PRIVATE KEY-----
		2413
		2414	-----BEGIN CERTIFICATE-----
		2415	... lots of base64'y-stuff
		2416	-----END CERTIFICATE-----
		2417
		2418	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2419	specify this file as C<cert_file>:
		2420
		2421	tcp_server undef, $port, sub {
		2422	my ($fh) = @_;
		2423
		2424	my $handle = new AnyEvent::Handle
		2425	fh => $fh,
		2426	tls => "accept",
		2427	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2428	...
		2429
		2430	When you have intermediate CA certificates that your clients might not
		2431	know about, just append them to the C<cert_file>.
		2432
1630	=back	2433	=back
1631
1632		2434
1633	=head1 SUBCLASSING AnyEvent::Handle	2435	=head1 SUBCLASSING AnyEvent::Handle
1634		2436
1635	In many cases, you might want to subclass AnyEvent::Handle.	2437	In many cases, you might want to subclass AnyEvent::Handle.
1636		2438
…		…
1653		2455
1654	=item * all members not documented here and not prefixed with an underscore	2456	=item * all members not documented here and not prefixed with an underscore
1655	are free to use in subclasses.	2457	are free to use in subclasses.
1656		2458
1657	Of course, new versions of AnyEvent::Handle may introduce more "public"	2459	Of course, new versions of AnyEvent::Handle may introduce more "public"
1658	member variables, but thats just life, at least it is documented.	2460	member variables, but that's just life. At least it is documented.
1659		2461
1660	=back	2462	=back
1661		2463
1662	=head1 AUTHOR	2464	=head1 AUTHOR
1663		2465
1664	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.	2466	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.
1665		2467
1666	=cut	2468	=cut
1667		2469
1668	1; # End of AnyEvent::Handle	2470	1
		2471

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines