ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.68 by root, Fri Jun 6 15:35:30 2008 UTC vs.
Revision 1.182 by root, Thu Sep 3 12:35:01 2009 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict;
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.151;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	warn "got error $msg\n";
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	);
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	filehandles.
52	on sockets see L<AnyEvent::Util>.	37
		38	The L<AnyEvent::Intro> tutorial contains some well-documented
		39	AnyEvent::Handle examples.
53		40
54	In the following, when the documentation refers to of "bytes" then this	41	In the following, when the documentation refers to of "bytes" then this
55	means characters. As sysread and syswrite are used for all I/O, their	42	means characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
57		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
		47
58	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
59	argument.	49	argument.
60		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
61	=head1 METHODS	65	=head1 METHODS
62		66
63	=over 4	67	=over 4
64		68
65	=item B<new (%args)>	69	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
66		70
67	The constructor supports these arguments (all as key => value pairs).	71	The constructor supports these arguments (all as C<< key => value >> pairs).
68		72
69	=over 4	73	=over 4
70		74
71	=item fh => $filehandle [MANDATORY]	75	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
72		76
73	The filehandle this L<AnyEvent::Handle> object will operate on.	77	The filehandle this L<AnyEvent::Handle> object will operate on.
74
75	NOTE: The filehandle will be set to non-blocking (using	78	NOTE: The filehandle will be set to non-blocking mode (using
76	AnyEvent::Util::fh_nonblocking).	79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		80	that mode.
77		81
		82	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		83
		84	Try to connect to the specified host and service (port), using
		85	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		86	default C<peername>.
		87
		88	You have to specify either this parameter, or C<fh>, above.
		89
		90	It is possible to push requests on the read and write queues, and modify
		91	properties of the stream, even while AnyEvent::Handle is connecting.
		92
		93	When this parameter is specified, then the C<on_prepare>,
		94	C<on_connect_error> and C<on_connect> callbacks will be called under the
		95	appropriate circumstances:
		96
		97	=over 4
		98
78	=item on_eof => $cb->($handle)	99	=item on_prepare => $cb->($handle)
79		100
80	Set the callback to be called when an end-of-file condition is detcted,	101	This (rarely used) callback is called before a new connection is
81	i.e. in the case of a socket, when the other side has closed the	102	attempted, but after the file handle has been created. It could be used to
82	connection cleanly.	103	prepare the file handle with parameters required for the actual connect
		104	(as opposed to settings that can be changed when the connection is already
		105	established).
83		106
84	While not mandatory, it is highly recommended to set an eof callback,	107	The return value of this callback should be the connect timeout value in
85	otherwise you might end up with a closed socket while you are still	108	seconds (or C<0>, or C<undef>, or the empty list, to indicate the default
86	waiting for data.	109	timeout is to be used).
87		110
		111	=item on_connect => $cb->($handle, $host, $port, $retry->())
		112
		113	This callback is called when a connection has been successfully established.
		114
		115	The actual numeric host and port (the socket peername) are passed as
		116	parameters, together with a retry callback.
		117
		118	When, for some reason, the handle is not acceptable, then calling
		119	C<$retry> will continue with the next conenction target (in case of
		120	multi-homed hosts or SRV records there can be multiple connection
		121	endpoints). When it is called then the read and write queues, eof status,
		122	tls status and similar properties of the handle are being reset.
		123
		124	In most cases, ignoring the C<$retry> parameter is the way to go.
		125
		126	=item on_connect_error => $cb->($handle, $message)
		127
		128	This callback is called when the conenction could not be
		129	established. C<$!> will contain the relevant error code, and C<$message> a
		130	message describing it (usually the same as C<"$!">).
		131
		132	If this callback isn't specified, then C<on_error> will be called with a
		133	fatal error instead.
		134
		135	=back
		136
88	=item on_error => $cb->($handle, $fatal)	137	=item on_error => $cb->($handle, $fatal, $message)
89		138
90	This is the error callback, which is called when, well, some error	139	This is the error callback, which is called when, well, some error
91	occured, such as not being able to resolve the hostname, failure to	140	occured, such as not being able to resolve the hostname, failure to
92	connect or a read error.	141	connect or a read error.
93		142
94	Some errors are fatal (which is indicated by C<$fatal> being true). On	143	Some errors are fatal (which is indicated by C<$fatal> being true). On
95	fatal errors the handle object will be shut down and will not be	144	fatal errors the handle object will be destroyed (by a call to C<< ->
		145	destroy >>) after invoking the error callback (which means you are free to
		146	examine the handle object). Examples of fatal errors are an EOF condition
		147	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		148	cases where the other side can close the connection at their will it is
		149	often easiest to not report C<EPIPE> errors in this callback.
		150
		151	AnyEvent::Handle tries to find an appropriate error code for you to check
		152	against, but in some cases (TLS errors), this does not work well. It is
		153	recommended to always output the C<$message> argument in human-readable
		154	error messages (it's usually the same as C<"$!">).
		155
96	usable. Non-fatal errors can be retried by simply returning, but it is	156	Non-fatal errors can be retried by simply returning, but it is recommended
97	recommended to simply ignore this parameter and instead abondon the handle	157	to simply ignore this parameter and instead abondon the handle object
98	object when this callback is invoked.	158	when this callback is invoked. Examples of non-fatal errors are timeouts
		159	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
99		160
100	On callback entrance, the value of C<$!> contains the operating system	161	On callback entrance, the value of C<$!> contains the operating system
101	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	162	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		163	C<EPROTO>).
102		164
103	While not mandatory, it is I<highly> recommended to set this callback, as	165	While not mandatory, it is I<highly> recommended to set this callback, as
104	you will not be notified of errors otherwise. The default simply calls	166	you will not be notified of errors otherwise. The default simply calls
105	C<croak>.	167	C<croak>.
106		168
…		…
110	and no read request is in the queue (unlike read queue callbacks, this	172	and no read request is in the queue (unlike read queue callbacks, this
111	callback will only be called when at least one octet of data is in the	173	callback will only be called when at least one octet of data is in the
112	read buffer).	174	read buffer).
113		175
114	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	176	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
115	method or access the C<$handle->{rbuf}> member directly.	177	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		178	must not enlarge or modify the read buffer, you can only remove data at
		179	the beginning from it.
116		180
117	When an EOF condition is detected then AnyEvent::Handle will first try to	181	When an EOF condition is detected then AnyEvent::Handle will first try to
118	feed all the remaining data to the queued callbacks and C<on_read> before	182	feed all the remaining data to the queued callbacks and C<on_read> before
119	calling the C<on_eof> callback. If no progress can be made, then a fatal	183	calling the C<on_eof> callback. If no progress can be made, then a fatal
120	error will be raised (with C<$!> set to C<EPIPE>).	184	error will be raised (with C<$!> set to C<EPIPE>).
121		185
		186	Note that, unlike requests in the read queue, an C<on_read> callback
		187	doesn't mean you I<require> some data: if there is an EOF and there
		188	are outstanding read requests then an error will be flagged. With an
		189	C<on_read> callback, the C<on_eof> callback will be invoked.
		190
		191	=item on_eof => $cb->($handle)
		192
		193	Set the callback to be called when an end-of-file condition is detected,
		194	i.e. in the case of a socket, when the other side has closed the
		195	connection cleanly, and there are no outstanding read requests in the
		196	queue (if there are read requests, then an EOF counts as an unexpected
		197	connection close and will be flagged as an error).
		198
		199	For sockets, this just means that the other side has stopped sending data,
		200	you can still try to write data, and, in fact, one can return from the EOF
		201	callback and continue writing data, as only the read part has been shut
		202	down.
		203
		204	If an EOF condition has been detected but no C<on_eof> callback has been
		205	set, then a fatal error will be raised with C<$!> set to <0>.
		206
122	=item on_drain => $cb->($handle)	207	=item on_drain => $cb->($handle)
123		208
124	This sets the callback that is called when the write buffer becomes empty	209	This sets the callback that is called when the write buffer becomes empty
125	(or when the callback is set and the buffer is empty already).	210	(or when the callback is set and the buffer is empty already).
126		211
127	To append to the write buffer, use the C<< ->push_write >> method.	212	To append to the write buffer, use the C<< ->push_write >> method.
128		213
		214	This callback is useful when you don't want to put all of your write data
		215	into the queue at once, for example, when you want to write the contents
		216	of some file to the socket you might not want to read the whole file into
		217	memory and push it into the queue, but instead only read more data from
		218	the file when the write queue becomes empty.
		219
129	=item timeout => $fractional_seconds	220	=item timeout => $fractional_seconds
130		221
		222	=item rtimeout => $fractional_seconds
		223
		224	=item wtimeout => $fractional_seconds
		225
131	If non-zero, then this enables an "inactivity" timeout: whenever this many	226	If non-zero, then these enables an "inactivity" timeout: whenever this
132	seconds pass without a successful read or write on the underlying file	227	many seconds pass without a successful read or write on the underlying
133	handle, the C<on_timeout> callback will be invoked (and if that one is	228	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
134	missing, an C<ETIMEDOUT> error will be raised).	229	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		230	error will be raised).
		231
		232	There are three variants of the timeouts that work fully independent
		233	of each other, for both read and write, just read, and just write:
		234	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		235	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		236	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
135		237
136	Note that timeout processing is also active when you currently do not have	238	Note that timeout processing is also active when you currently do not have
137	any outstanding read or write requests: If you plan to keep the connection	239	any outstanding read or write requests: If you plan to keep the connection
138	idle then you should disable the timout temporarily or ignore the timeout	240	idle then you should disable the timout temporarily or ignore the timeout
139	in the C<on_timeout> callback.	241	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		242	restart the timeout.
140		243
141	Zero (the default) disables this timeout.	244	Zero (the default) disables this timeout.
142		245
143	=item on_timeout => $cb->($handle)	246	=item on_timeout => $cb->($handle)
144		247
…		…
148		251
149	=item rbuf_max => <bytes>	252	=item rbuf_max => <bytes>
150		253
151	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	254	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
152	when the read buffer ever (strictly) exceeds this size. This is useful to	255	when the read buffer ever (strictly) exceeds this size. This is useful to
153	avoid denial-of-service attacks.	256	avoid some forms of denial-of-service attacks.
154		257
155	For example, a server accepting connections from untrusted sources should	258	For example, a server accepting connections from untrusted sources should
156	be configured to accept only so-and-so much data that it cannot act on	259	be configured to accept only so-and-so much data that it cannot act on
157	(for example, when expecting a line, an attacker could send an unlimited	260	(for example, when expecting a line, an attacker could send an unlimited
158	amount of data without a callback ever being called as long as the line	261	amount of data without a callback ever being called as long as the line
159	isn't finished).	262	isn't finished).
160		263
		264	=item autocork => <boolean>
		265
		266	When disabled (the default), then C<push_write> will try to immediately
		267	write the data to the handle, if possible. This avoids having to register
		268	a write watcher and wait for the next event loop iteration, but can
		269	be inefficient if you write multiple small chunks (on the wire, this
		270	disadvantage is usually avoided by your kernel's nagle algorithm, see
		271	C<no_delay>, but this option can save costly syscalls).
		272
		273	When enabled, then writes will always be queued till the next event loop
		274	iteration. This is efficient when you do many small writes per iteration,
		275	but less efficient when you do a single write only per iteration (or when
		276	the write buffer often is full). It also increases write latency.
		277
		278	=item no_delay => <boolean>
		279
		280	When doing small writes on sockets, your operating system kernel might
		281	wait a bit for more data before actually sending it out. This is called
		282	the Nagle algorithm, and usually it is beneficial.
		283
		284	In some situations you want as low a delay as possible, which can be
		285	accomplishd by setting this option to a true value.
		286
		287	The default is your opertaing system's default behaviour (most likely
		288	enabled), this option explicitly enables or disables it, if possible.
		289
		290	=item keepalive => <boolean>
		291
		292	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		293	normally, TCP connections have no time-out once established, so TCP
		294	conenctions, once established, can stay alive forever even when the other
		295	side has long gone. TCP keepalives are a cheap way to take down long-lived
		296	TCP connections whent he other side becomes unreachable. While the default
		297	is OS-dependent, TCP keepalives usually kick in after around two hours,
		298	and, if the other side doesn't reply, take down the TCP connection some 10
		299	to 15 minutes later.
		300
		301	It is harmless to specify this option for file handles that do not support
		302	keepalives, and enabling it on connections that are potentially long-lived
		303	is usually a good idea.
		304
		305	=item oobinline => <boolean>
		306
		307	BSD majorly fucked up the implementation of TCP urgent data. The result
		308	is that almost no OS implements TCP according to the specs, and every OS
		309	implements it slightly differently.
		310
		311	If you want to handle TCP urgent data, then setting this flag gives you
		312	the most portable way of getting urgent data, by putting it into the
		313	stream.
		314
161	=item read_size => <bytes>	315	=item read_size => <bytes>
162		316
163	The default read block size (the amount of bytes this module will try to read	317	The default read block size (the amount of bytes this module will
164	during each (loop iteration). Default: C<8192>.	318	try to read during each loop iteration, which affects memory
		319	requirements). Default: C<8192>.
165		320
166	=item low_water_mark => <bytes>	321	=item low_water_mark => <bytes>
167		322
168	Sets the amount of bytes (default: C<0>) that make up an "empty" write	323	Sets the amount of bytes (default: C<0>) that make up an "empty" write
169	buffer: If the write reaches this size or gets even samller it is	324	buffer: If the write reaches this size or gets even samller it is
170	considered empty.	325	considered empty.
171		326
		327	Sometimes it can be beneficial (for performance reasons) to add data to
		328	the write buffer before it is fully drained, but this is a rare case, as
		329	the operating system kernel usually buffers data as well, so the default
		330	is good in almost all cases.
		331
172	=item linger => <seconds>	332	=item linger => <seconds>
173		333
174	If non-zero (default: C<3600>), then the destructor of the	334	If non-zero (default: C<3600>), then the destructor of the
175	AnyEvent::Handle object will check wether there is still outstanding write	335	AnyEvent::Handle object will check whether there is still outstanding
176	data and will install a watcher that will write out this data. No errors	336	write data and will install a watcher that will write this data to the
177	will be reported (this mostly matches how the operating system treats	337	socket. No errors will be reported (this mostly matches how the operating
178	outstanding data at socket close time).	338	system treats outstanding data at socket close time).
179		339
180	This will not work for partial TLS data that could not yet been	340	This will not work for partial TLS data that could not be encoded
181	encoded. This data will be lost.	341	yet. This data will be lost. Calling the C<stoptls> method in time might
		342	help.
		343
		344	=item peername => $string
		345
		346	A string used to identify the remote site - usually the DNS hostname
		347	(I<not> IDN!) used to create the connection, rarely the IP address.
		348
		349	Apart from being useful in error messages, this string is also used in TLS
		350	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		351	verification will be skipped when C<peername> is not specified or
		352	C<undef>.
182		353
183	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	354	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
184		355
185	When this parameter is given, it enables TLS (SSL) mode, that means it	356	When this parameter is given, it enables TLS (SSL) mode, that means
186	will start making tls handshake and will transparently encrypt/decrypt	357	AnyEvent will start a TLS handshake as soon as the conenction has been
187	data.	358	established and will transparently encrypt/decrypt data afterwards.
		359
		360	All TLS protocol errors will be signalled as C<EPROTO>, with an
		361	appropriate error message.
188		362
189	TLS mode requires Net::SSLeay to be installed (it will be loaded	363	TLS mode requires Net::SSLeay to be installed (it will be loaded
190	automatically when you try to create a TLS handle).	364	automatically when you try to create a TLS handle): this module doesn't
		365	have a dependency on that module, so if your module requires it, you have
		366	to add the dependency yourself.
191		367
192	For the TLS server side, use C<accept>, and for the TLS client side of a	368	Unlike TCP, TLS has a server and client side: for the TLS server side, use
193	connection, use C<connect> mode.	369	C<accept>, and for the TLS client side of a connection, use C<connect>
		370	mode.
194		371
195	You can also provide your own TLS connection object, but you have	372	You can also provide your own TLS connection object, but you have
196	to make sure that you call either C<Net::SSLeay::set_connect_state>	373	to make sure that you call either C<Net::SSLeay::set_connect_state>
197	or C<Net::SSLeay::set_accept_state> on it before you pass it to	374	or C<Net::SSLeay::set_accept_state> on it before you pass it to
198	AnyEvent::Handle.	375	AnyEvent::Handle. Also, this module will take ownership of this connection
		376	object.
199		377
		378	At some future point, AnyEvent::Handle might switch to another TLS
		379	implementation, then the option to use your own session object will go
		380	away.
		381
		382	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		383	passing in the wrong integer will lead to certain crash. This most often
		384	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		385	segmentation fault.
		386
200	See the C<starttls> method if you need to start TLs negotiation later.	387	See the C<< ->starttls >> method for when need to start TLS negotiation later.
201		388
202	=item tls_ctx => $ssl_ctx	389	=item tls_ctx => $anyevent_tls
203		390
204	Use the given Net::SSLeay::CTX object to create the new TLS connection	391	Use the given C<AnyEvent::TLS> object to create the new TLS connection
205	(unless a connection object was specified directly). If this parameter is	392	(unless a connection object was specified directly). If this parameter is
206	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	393	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
207		394
		395	Instead of an object, you can also specify a hash reference with C<< key
		396	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		397	new TLS context object.
		398
		399	=item on_starttls => $cb->($handle, $success[, $error_message])
		400
		401	This callback will be invoked when the TLS/SSL handshake has finished. If
		402	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		403	(C<on_stoptls> will not be called in this case).
		404
		405	The session in C<< $handle->{tls} >> can still be examined in this
		406	callback, even when the handshake was not successful.
		407
		408	TLS handshake failures will not cause C<on_error> to be invoked when this
		409	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		410
		411	Without this callback, handshake failures lead to C<on_error> being
		412	called, as normal.
		413
		414	Note that you cannot call C<starttls> right again in this callback. If you
		415	need to do that, start an zero-second timer instead whose callback can
		416	then call C<< ->starttls >> again.
		417
		418	=item on_stoptls => $cb->($handle)
		419
		420	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		421	set, then it will be invoked after freeing the TLS session. If it is not,
		422	then a TLS shutdown condition will be treated like a normal EOF condition
		423	on the handle.
		424
		425	The session in C<< $handle->{tls} >> can still be examined in this
		426	callback.
		427
		428	This callback will only be called on TLS shutdowns, not when the
		429	underlying handle signals EOF.
		430
208	=item json => JSON or JSON::XS object	431	=item json => JSON or JSON::XS object
209		432
210	This is the json coder object used by the C<json> read and write types.	433	This is the json coder object used by the C<json> read and write types.
211		434
212	If you don't supply it, then AnyEvent::Handle will create and use a	435	If you don't supply it, then AnyEvent::Handle will create and use a
213	suitable one, which will write and expect UTF-8 encoded JSON texts.	436	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		437	texts.
214		438
215	Note that you are responsible to depend on the JSON module if you want to	439	Note that you are responsible to depend on the JSON module if you want to
216	use this functionality, as AnyEvent does not have a dependency itself.	440	use this functionality, as AnyEvent does not have a dependency itself.
217		441
218	=item filter_r => $cb
219
220	=item filter_w => $cb
221
222	These exist, but are undocumented at this time.
223
224	=back	442	=back
225		443
226	=cut	444	=cut
227		445
228	sub new {	446	sub new {
229	my $class = shift;	447	my $class = shift;
230
231	my $self = bless { @_ }, $class;	448	my $self = bless { @_ }, $class;
232		449
233	$self->{fh} or Carp::croak "mandatory argument fh is missing";	450	if ($self->{fh}) {
		451	$self->_start;
		452	return unless $self->{fh}; # could be gone by now
		453
		454	} elsif ($self->{connect}) {
		455	require AnyEvent::Socket;
		456
		457	$self->{peername} = $self->{connect}[0]
		458	unless exists $self->{peername};
		459
		460	$self->{_skip_drain_rbuf} = 1;
		461
		462	{
		463	Scalar::Util::weaken (my $self = $self);
		464
		465	$self->{_connect} =
		466	AnyEvent::Socket::tcp_connect (
		467	$self->{connect}[0],
		468	$self->{connect}[1],
		469	sub {
		470	my ($fh, $host, $port, $retry) = @_;
		471
		472	if ($fh) {
		473	$self->{fh} = $fh;
		474
		475	delete $self->{_skip_drain_rbuf};
		476	$self->_start;
		477
		478	$self->{on_connect}
		479	and $self->{on_connect}($self, $host, $port, sub {
		480	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		481	$self->{_skip_drain_rbuf} = 1;
		482	&$retry;
		483	});
		484
		485	} else {
		486	if ($self->{on_connect_error}) {
		487	$self->{on_connect_error}($self, "$!");
		488	$self->destroy;
		489	} else {
		490	$self->_error ($!, 1);
		491	}
		492	}
		493	},
		494	sub {
		495	local $self->{fh} = $_[0];
		496
		497	$self->{on_prepare}
		498	? $self->{on_prepare}->($self)
		499	: ()
		500	}
		501	);
		502	}
		503
		504	} else {
		505	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		506	}
		507
		508	$self
		509	}
		510
		511	sub _start {
		512	my ($self) = @_;
234		513
235	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	514	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
236		515
237	if ($self->{tls}) {	516	$self->{_activity} =
238	require Net::SSLeay;	517	$self->{_ractivity} =
		518	$self->{_wactivity} = AE::now;
		519
		520	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		521	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		522	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		523
		524	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay};
		525	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive};
		526	$self->oobinline (delete $self->{oobinline}) if exists $self->{oobinline};
		527
239	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	528	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
240	}	529	if $self->{tls};
241		530
242	$self->{_activity} = AnyEvent->now;
243	$self->_timeout;
244
245	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	531	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
246		532
247	$self->start_read	533	$self->start_read
248	if $self->{on_read};	534	if $self->{on_read} || @{ $self->{_queue} };
249		535
250	$self	536	$self->_drain_wbuf;
251	}
252
253	sub _shutdown {
254	my ($self) = @_;
255
256	delete $self->{_tw};
257	delete $self->{_rw};
258	delete $self->{_ww};
259	delete $self->{fh};
260
261	$self->stoptls;
262	}	537	}
263		538
264	sub _error {	539	sub _error {
265	my ($self, $errno, $fatal) = @_;	540	my ($self, $errno, $fatal, $message) = @_;
266
267	$self->_shutdown
268	if $fatal;
269		541
270	$! = $errno;	542	$! = $errno;
		543	$message ||= "$!";
271		544
272	if ($self->{on_error}) {	545	if ($self->{on_error}) {
273	$self->{on_error}($self, $fatal);	546	$self->{on_error}($self, $fatal, $message);
274	} else {	547	$self->destroy if $fatal;
		548	} elsif ($self->{fh}) {
		549	$self->destroy;
275	Carp::croak "AnyEvent::Handle uncaught error: $!";	550	Carp::croak "AnyEvent::Handle uncaught error: $message";
276	}	551	}
277	}	552	}
278		553
279	=item $fh = $handle->fh	554	=item $fh = $handle->fh
280		555
281	This method returns the file handle of the L<AnyEvent::Handle> object.	556	This method returns the file handle used to create the L<AnyEvent::Handle> object.
282		557
283	=cut	558	=cut
284		559
285	sub fh { $_[0]{fh} }	560	sub fh { $_[0]{fh} }
286		561
…		…
304	$_[0]{on_eof} = $_[1];	579	$_[0]{on_eof} = $_[1];
305	}	580	}
306		581
307	=item $handle->on_timeout ($cb)	582	=item $handle->on_timeout ($cb)
308		583
309	Replace the current C<on_timeout> callback, or disables the callback	584	=item $handle->on_rtimeout ($cb)
310	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor
311	argument.
312		585
313	=cut	586	=item $handle->on_wtimeout ($cb)
314		587
315	sub on_timeout {	588	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
		589	callback, or disables the callback (but not the timeout) if C<$cb> =
		590	C<undef>. See the C<timeout> constructor argument and method.
		591
		592	=cut
		593
		594	# see below
		595
		596	=item $handle->autocork ($boolean)
		597
		598	Enables or disables the current autocork behaviour (see C<autocork>
		599	constructor argument). Changes will only take effect on the next write.
		600
		601	=cut
		602
		603	sub autocork {
		604	$_[0]{autocork} = $_[1];
		605	}
		606
		607	=item $handle->no_delay ($boolean)
		608
		609	Enables or disables the C<no_delay> setting (see constructor argument of
		610	the same name for details).
		611
		612	=cut
		613
		614	sub no_delay {
		615	$_[0]{no_delay} = $_[1];
		616
		617	eval {
		618	local $SIG{__DIE__};
		619	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		620	if $_[0]{fh};
		621	};
		622	}
		623
		624	=item $handle->keepalive ($boolean)
		625
		626	Enables or disables the C<keepalive> setting (see constructor argument of
		627	the same name for details).
		628
		629	=cut
		630
		631	sub keepalive {
		632	$_[0]{keepalive} = $_[1];
		633
		634	eval {
		635	local $SIG{__DIE__};
		636	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		637	if $_[0]{fh};
		638	};
		639	}
		640
		641	=item $handle->oobinline ($boolean)
		642
		643	Enables or disables the C<oobinline> setting (see constructor argument of
		644	the same name for details).
		645
		646	=cut
		647
		648	sub oobinline {
		649	$_[0]{oobinline} = $_[1];
		650
		651	eval {
		652	local $SIG{__DIE__};
		653	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		654	if $_[0]{fh};
		655	};
		656	}
		657
		658	=item $handle->keepalive ($boolean)
		659
		660	Enables or disables the C<keepalive> setting (see constructor argument of
		661	the same name for details).
		662
		663	=cut
		664
		665	sub keepalive {
		666	$_[0]{keepalive} = $_[1];
		667
		668	eval {
		669	local $SIG{__DIE__};
		670	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		671	if $_[0]{fh};
		672	};
		673	}
		674
		675	=item $handle->on_starttls ($cb)
		676
		677	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		678
		679	=cut
		680
		681	sub on_starttls {
		682	$_[0]{on_starttls} = $_[1];
		683	}
		684
		685	=item $handle->on_stoptls ($cb)
		686
		687	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		688
		689	=cut
		690
		691	sub on_starttls {
316	$_[0]{on_timeout} = $_[1];	692	$_[0]{on_stoptls} = $_[1];
		693	}
		694
		695	=item $handle->rbuf_max ($max_octets)
		696
		697	Configures the C<rbuf_max> setting (C<undef> disables it).
		698
		699	=cut
		700
		701	sub rbuf_max {
		702	$_[0]{rbuf_max} = $_[1];
317	}	703	}
318		704
319	#############################################################################	705	#############################################################################
320		706
321	=item $handle->timeout ($seconds)	707	=item $handle->timeout ($seconds)
322		708
		709	=item $handle->rtimeout ($seconds)
		710
		711	=item $handle->wtimeout ($seconds)
		712
323	Configures (or disables) the inactivity timeout.	713	Configures (or disables) the inactivity timeout.
324		714
325	=cut	715	=item $handle->timeout_reset
326		716
327	sub timeout {	717	=item $handle->rtimeout_reset
		718
		719	=item $handle->wtimeout_reset
		720
		721	Reset the activity timeout, as if data was received or sent.
		722
		723	These methods are cheap to call.
		724
		725	=cut
		726
		727	for my $dir ("", "r", "w") {
		728	my $timeout = "${dir}timeout";
		729	my $tw = "_${dir}tw";
		730	my $on_timeout = "on_${dir}timeout";
		731	my $activity = "_${dir}activity";
		732	my $cb;
		733
		734	*$on_timeout = sub {
		735	$_[0]{$on_timeout} = $_[1];
		736	};
		737
		738	*$timeout = sub {
328	my ($self, $timeout) = @_;	739	my ($self, $new_value) = @_;
329		740
330	$self->{timeout} = $timeout;	741	$self->{$timeout} = $new_value;
331	$self->_timeout;	742	delete $self->{$tw}; &$cb;
332	}	743	};
333		744
		745	*{"${dir}timeout_reset"} = sub {
		746	$_[0]{$activity} = AE::now;
		747	};
		748
		749	# main workhorse:
334	# reset the timeout watcher, as neccessary	750	# reset the timeout watcher, as neccessary
335	# also check for time-outs	751	# also check for time-outs
336	sub _timeout {	752	$cb = sub {
337	my ($self) = @_;	753	my ($self) = @_;
338		754
339	if ($self->{timeout}) {	755	if ($self->{$timeout} && $self->{fh}) {
340	my $NOW = AnyEvent->now;	756	my $NOW = AE::now;
341		757
342	# when would the timeout trigger?	758	# when would the timeout trigger?
343	my $after = $self->{_activity} + $self->{timeout} - $NOW;	759	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
344		760
345	# now or in the past already?	761	# now or in the past already?
346	if ($after <= 0) {	762	if ($after <= 0) {
347	$self->{_activity} = $NOW;	763	$self->{$activity} = $NOW;
348		764
349	if ($self->{on_timeout}) {	765	if ($self->{$on_timeout}) {
350	$self->{on_timeout}($self);	766	$self->{$on_timeout}($self);
351	} else {	767	} else {
352	$self->_error (&Errno::ETIMEDOUT);	768	$self->_error (Errno::ETIMEDOUT);
		769	}
		770
		771	# callback could have changed timeout value, optimise
		772	return unless $self->{$timeout};
		773
		774	# calculate new after
		775	$after = $self->{$timeout};
353	}	776	}
354		777
355	# callback could have changed timeout value, optimise	778	Scalar::Util::weaken $self;
356	return unless $self->{timeout};	779	return unless $self; # ->error could have destroyed $self
357		780
358	# calculate new after	781	$self->{$tw} ||= AE::timer $after, 0, sub {
359	$after = $self->{timeout};	782	delete $self->{$tw};
		783	$cb->($self);
		784	};
		785	} else {
		786	delete $self->{$tw};
360	}	787	}
361
362	Scalar::Util::weaken $self;
363	return unless $self; # ->error could have destroyed $self
364
365	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
366	delete $self->{_tw};
367	$self->_timeout;
368	});
369	} else {
370	delete $self->{_tw};
371	}	788	}
372	}	789	}
373		790
374	#############################################################################	791	#############################################################################
375		792
…		…
399	my ($self, $cb) = @_;	816	my ($self, $cb) = @_;
400		817
401	$self->{on_drain} = $cb;	818	$self->{on_drain} = $cb;
402		819
403	$cb->($self)	820	$cb->($self)
404	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	821	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
405	}	822	}
406		823
407	=item $handle->push_write ($data)	824	=item $handle->push_write ($data)
408		825
409	Queues the given scalar to be written. You can push as much data as you	826	Queues the given scalar to be written. You can push as much data as you
…		…
420	Scalar::Util::weaken $self;	837	Scalar::Util::weaken $self;
421		838
422	my $cb = sub {	839	my $cb = sub {
423	my $len = syswrite $self->{fh}, $self->{wbuf};	840	my $len = syswrite $self->{fh}, $self->{wbuf};
424		841
425	if ($len >= 0) {	842	if (defined $len) {
426	substr $self->{wbuf}, 0, $len, "";	843	substr $self->{wbuf}, 0, $len, "";
427		844
428	$self->{_activity} = AnyEvent->now;	845	$self->{_activity} = $self->{_wactivity} = AE::now;
429		846
430	$self->{on_drain}($self)	847	$self->{on_drain}($self)
431	if $self->{low_water_mark} >= length $self->{wbuf}	848	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
432	&& $self->{on_drain};	849	&& $self->{on_drain};
433		850
434	delete $self->{_ww} unless length $self->{wbuf};	851	delete $self->{_ww} unless length $self->{wbuf};
435	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	852	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
436	$self->_error ($!, 1);	853	$self->_error ($!, 1);
437	}	854	}
438	};	855	};
439		856
440	# try to write data immediately	857	# try to write data immediately
441	$cb->();	858	$cb->() unless $self->{autocork};
442		859
443	# if still data left in wbuf, we need to poll	860	# if still data left in wbuf, we need to poll
444	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	861	$self->{_ww} = AE::io $self->{fh}, 1, $cb
445	if length $self->{wbuf};	862	if length $self->{wbuf};
446	};	863	};
447	}	864	}
448		865
449	our %WH;	866	our %WH;
…		…
460		877
461	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	878	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
462	->($self, @_);	879	->($self, @_);
463	}	880	}
464		881
465	if ($self->{filter_w}) {	882	if ($self->{tls}) {
466	$self->{filter_w}($self, \$_[0]);	883	$self->{_tls_wbuf} .= $_[0];
		884	&_dotls ($self) if $self->{fh};
467	} else {	885	} else {
468	$self->{wbuf} .= $_[0];	886	$self->{wbuf} .= $_[0];
469	$self->_drain_wbuf;	887	$self->_drain_wbuf if $self->{fh};
470	}	888	}
471	}	889	}
472		890
473	=item $handle->push_write (type => @args)	891	=item $handle->push_write (type => @args)
474		892
…		…
488	=cut	906	=cut
489		907
490	register_write_type netstring => sub {	908	register_write_type netstring => sub {
491	my ($self, $string) = @_;	909	my ($self, $string) = @_;
492		910
493	sprintf "%d:%s,", (length $string), $string	911	(length $string) . ":$string,"
494	};	912	};
495		913
496	=item packstring => $format, $data	914	=item packstring => $format, $data
497		915
498	An octet string prefixed with an encoded length. The encoding C<$format>	916	An octet string prefixed with an encoded length. The encoding C<$format>
…		…
538	Other languages could read single lines terminated by a newline and pass	956	Other languages could read single lines terminated by a newline and pass
539	this line into their JSON decoder of choice.	957	this line into their JSON decoder of choice.
540		958
541	=cut	959	=cut
542		960
		961	sub json_coder() {
		962	eval { require JSON::XS; JSON::XS->new->utf8 }
		963	|| do { require JSON; JSON->new->utf8 }
		964	}
		965
543	register_write_type json => sub {	966	register_write_type json => sub {
544	my ($self, $ref) = @_;	967	my ($self, $ref) = @_;
545		968
546	require JSON;	969	my $json = $self->{json} ||= json_coder;
547		970
548	$self->{json} ? $self->{json}->encode ($ref)	971	$json->encode ($ref)
549	: JSON::encode_json ($ref)
550	};	972	};
551		973
552	=item storable => $reference	974	=item storable => $reference
553		975
554	Freezes the given reference using L<Storable> and writes it to the	976	Freezes the given reference using L<Storable> and writes it to the
…		…
563		985
564	pack "w/a*", Storable::nfreeze ($ref)	986	pack "w/a*", Storable::nfreeze ($ref)
565	};	987	};
566		988
567	=back	989	=back
		990
		991	=item $handle->push_shutdown
		992
		993	Sometimes you know you want to close the socket after writing your data
		994	before it was actually written. One way to do that is to replace your
		995	C<on_drain> handler by a callback that shuts down the socket (and set
		996	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		997	replaces the C<on_drain> callback with:
		998
		999	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		1000
		1001	This simply shuts down the write side and signals an EOF condition to the
		1002	the peer.
		1003
		1004	You can rely on the normal read queue and C<on_eof> handling
		1005	afterwards. This is the cleanest way to close a connection.
		1006
		1007	=cut
		1008
		1009	sub push_shutdown {
		1010	my ($self) = @_;
		1011
		1012	delete $self->{low_water_mark};
		1013	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1014	}
568		1015
569	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1016	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
570		1017
571	This function (not method) lets you add your own types to C<push_write>.	1018	This function (not method) lets you add your own types to C<push_write>.
572	Whenever the given C<type> is used, C<push_write> will invoke the code	1019	Whenever the given C<type> is used, C<push_write> will invoke the code
…		…
593	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1040	ways, the "simple" way, using only C<on_read> and the "complex" way, using
594	a queue.	1041	a queue.
595		1042
596	In the simple case, you just install an C<on_read> callback and whenever	1043	In the simple case, you just install an C<on_read> callback and whenever
597	new data arrives, it will be called. You can then remove some data (if	1044	new data arrives, it will be called. You can then remove some data (if
598	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	1045	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna
599	or not.	1046	leave the data there if you want to accumulate more (e.g. when only a
		1047	partial message has been received so far).
600		1048
601	In the more complex case, you want to queue multiple callbacks. In this	1049	In the more complex case, you want to queue multiple callbacks. In this
602	case, AnyEvent::Handle will call the first queued callback each time new	1050	case, AnyEvent::Handle will call the first queued callback each time new
603	data arrives (also the first time it is queued) and removes it when it has	1051	data arrives (also the first time it is queued) and removes it when it has
604	done its job (see C<push_read>, below).	1052	done its job (see C<push_read>, below).
…		…
622	# handle xml	1070	# handle xml
623	});	1071	});
624	});	1072	});
625	});	1073	});
626		1074
627	Example 2: Implement a client for a protocol that replies either with	1075	Example 2: Implement a client for a protocol that replies either with "OK"
628	"OK" and another line or "ERROR" for one request, and 64 bytes for the	1076	and another line or "ERROR" for the first request that is sent, and 64
629	second request. Due tot he availability of a full queue, we can just	1077	bytes for the second request. Due to the availability of a queue, we can
630	pipeline sending both requests and manipulate the queue as necessary in	1078	just pipeline sending both requests and manipulate the queue as necessary
631	the callbacks:	1079	in the callbacks.
632		1080
633	# request one	1081	When the first callback is called and sees an "OK" response, it will
		1082	C<unshift> another line-read. This line-read will be queued I<before> the
		1083	64-byte chunk callback.
		1084
		1085	# request one, returns either "OK + extra line" or "ERROR"
634	$handle->push_write ("request 1\015\012");	1086	$handle->push_write ("request 1\015\012");
635		1087
636	# we expect "ERROR" or "OK" as response, so push a line read	1088	# we expect "ERROR" or "OK" as response, so push a line read
637	$handle->push_read (line => sub {	1089	$handle->push_read (line => sub {
638	# if we got an "OK", we have to _prepend_ another line,	1090	# if we got an "OK", we have to _prepend_ another line,
…		…
645	...	1097	...
646	});	1098	});
647	}	1099	}
648	});	1100	});
649		1101
650	# request two	1102	# request two, simply returns 64 octets
651	$handle->push_write ("request 2\015\012");	1103	$handle->push_write ("request 2\015\012");
652		1104
653	# simply read 64 bytes, always	1105	# simply read 64 bytes, always
654	$handle->push_read (chunk => 64, sub {	1106	$handle->push_read (chunk => 64, sub {
655	my $response = $_[1];	1107	my $response = $_[1];
…		…
661	=cut	1113	=cut
662		1114
663	sub _drain_rbuf {	1115	sub _drain_rbuf {
664	my ($self) = @_;	1116	my ($self) = @_;
665		1117
		1118	# avoid recursion
		1119	return if $self->{_skip_drain_rbuf};
666	local $self->{_in_drain} = 1;	1120	local $self->{_skip_drain_rbuf} = 1;
667
668	if (
669	defined $self->{rbuf_max}
670	&& $self->{rbuf_max} < length $self->{rbuf}
671	) {
672	return $self->_error (&Errno::ENOSPC, 1);
673	}
674		1121
675	while () {	1122	while () {
676	no strict 'refs';	1123	# we need to use a separate tls read buffer, as we must not receive data while
		1124	# we are draining the buffer, and this can only happen with TLS.
		1125	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1126	if exists $self->{_tls_rbuf};
677		1127
678	my $len = length $self->{rbuf};	1128	my $len = length $self->{rbuf};
679		1129
680	if (my $cb = shift @{ $self->{_queue} }) {	1130	if (my $cb = shift @{ $self->{_queue} }) {
681	unless ($cb->($self)) {	1131	unless ($cb->($self)) {
682	if ($self->{_eof}) {	1132	# no progress can be made
683	# no progress can be made (not enough data and no data forthcoming)	1133	# (not enough data and no data forthcoming)
684	$self->_error (&Errno::EPIPE, 1), last;	1134	$self->_error (Errno::EPIPE, 1), return
685	}	1135	if $self->{_eof};
686		1136
687	unshift @{ $self->{_queue} }, $cb;	1137	unshift @{ $self->{_queue} }, $cb;
688	last;	1138	last;
689	}	1139	}
690	} elsif ($self->{on_read}) {	1140	} elsif ($self->{on_read}) {
…		…
697	&& !@{ $self->{_queue} } # and the queue is still empty	1147	&& !@{ $self->{_queue} } # and the queue is still empty
698	&& $self->{on_read} # but we still have on_read	1148	&& $self->{on_read} # but we still have on_read
699	) {	1149	) {
700	# no further data will arrive	1150	# no further data will arrive
701	# so no progress can be made	1151	# so no progress can be made
702	$self->_error (&Errno::EPIPE, 1), last	1152	$self->_error (Errno::EPIPE, 1), return
703	if $self->{_eof};	1153	if $self->{_eof};
704		1154
705	last; # more data might arrive	1155	last; # more data might arrive
706	}	1156	}
707	} else {	1157	} else {
708	# read side becomes idle	1158	# read side becomes idle
709	delete $self->{_rw};	1159	delete $self->{_rw} unless $self->{tls};
710	last;	1160	last;
711	}	1161	}
712	}	1162	}
713		1163
		1164	if ($self->{_eof}) {
		1165	$self->{on_eof}
714	$self->{on_eof}($self)	1166	? $self->{on_eof}($self)
715	if $self->{_eof} && $self->{on_eof};	1167	: $self->_error (0, 1, "Unexpected end-of-file");
		1168
		1169	return;
		1170	}
		1171
		1172	if (
		1173	defined $self->{rbuf_max}
		1174	&& $self->{rbuf_max} < length $self->{rbuf}
		1175	) {
		1176	$self->_error (Errno::ENOSPC, 1), return;
		1177	}
716		1178
717	# may need to restart read watcher	1179	# may need to restart read watcher
718	unless ($self->{_rw}) {	1180	unless ($self->{_rw}) {
719	$self->start_read	1181	$self->start_read
720	if $self->{on_read} || @{ $self->{_queue} };	1182	if $self->{on_read} || @{ $self->{_queue} };
…		…
731		1193
732	sub on_read {	1194	sub on_read {
733	my ($self, $cb) = @_;	1195	my ($self, $cb) = @_;
734		1196
735	$self->{on_read} = $cb;	1197	$self->{on_read} = $cb;
736	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1198	$self->_drain_rbuf if $cb;
737	}	1199	}
738		1200
739	=item $handle->rbuf	1201	=item $handle->rbuf
740		1202
741	Returns the read buffer (as a modifiable lvalue).	1203	Returns the read buffer (as a modifiable lvalue).
742		1204
743	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1205	You can access the read buffer directly as the C<< ->{rbuf} >>
744	you want.	1206	member, if you want. However, the only operation allowed on the
		1207	read buffer (apart from looking at it) is removing data from its
		1208	beginning. Otherwise modifying or appending to it is not allowed and will
		1209	lead to hard-to-track-down bugs.
745		1210
746	NOTE: The read buffer should only be used or modified if the C<on_read>,	1211	NOTE: The read buffer should only be used or modified if the C<on_read>,
747	C<push_read> or C<unshift_read> methods are used. The other read methods	1212	C<push_read> or C<unshift_read> methods are used. The other read methods
748	automatically manage the read buffer.	1213	automatically manage the read buffer.
749		1214
…		…
790	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1255	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")
791	->($self, $cb, @_);	1256	->($self, $cb, @_);
792	}	1257	}
793		1258
794	push @{ $self->{_queue} }, $cb;	1259	push @{ $self->{_queue} }, $cb;
795	$self->_drain_rbuf unless $self->{_in_drain};	1260	$self->_drain_rbuf;
796	}	1261	}
797		1262
798	sub unshift_read {	1263	sub unshift_read {
799	my $self = shift;	1264	my $self = shift;
800	my $cb = pop;	1265	my $cb = pop;
…		…
804		1269
805	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1270	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
806	->($self, $cb, @_);	1271	->($self, $cb, @_);
807	}	1272	}
808		1273
809
810	unshift @{ $self->{_queue} }, $cb;	1274	unshift @{ $self->{_queue} }, $cb;
811	$self->_drain_rbuf unless $self->{_in_drain};	1275	$self->_drain_rbuf;
812	}	1276	}
813		1277
814	=item $handle->push_read (type => @args, $cb)	1278	=item $handle->push_read (type => @args, $cb)
815		1279
816	=item $handle->unshift_read (type => @args, $cb)	1280	=item $handle->unshift_read (type => @args, $cb)
…		…
846	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	1310	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
847	1	1311	1
848	}	1312	}
849	};	1313	};
850		1314
851	# compatibility with older API
852	sub push_read_chunk {
853	$_[0]->push_read (chunk => $_[1], $_[2]);
854	}
855
856	sub unshift_read_chunk {
857	$_[0]->unshift_read (chunk => $_[1], $_[2]);
858	}
859
860	=item line => [$eol, ]$cb->($handle, $line, $eol)	1315	=item line => [$eol, ]$cb->($handle, $line, $eol)
861		1316
862	The callback will be called only once a full line (including the end of	1317	The callback will be called only once a full line (including the end of
863	line marker, C<$eol>) has been read. This line (excluding the end of line	1318	line marker, C<$eol>) has been read. This line (excluding the end of line
864	marker) will be passed to the callback as second argument (C<$line>), and	1319	marker) will be passed to the callback as second argument (C<$line>), and
…		…
879	=cut	1334	=cut
880		1335
881	register_read_type line => sub {	1336	register_read_type line => sub {
882	my ($self, $cb, $eol) = @_;	1337	my ($self, $cb, $eol) = @_;
883		1338
884	$eol = qr|(\015?\012)| if @_ < 3;	1339	if (@_ < 3) {
		1340	# this is more than twice as fast as the generic code below
		1341	sub {
		1342	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
		1343
		1344	$cb->($_[0], $1, $2);
		1345	1
		1346	}
		1347	} else {
885	$eol = quotemeta $eol unless ref $eol;	1348	$eol = quotemeta $eol unless ref $eol;
886	$eol = qr|^(.*?)($eol)|s;	1349	$eol = qr|^(.*?)($eol)|s;
887		1350
888	sub {	1351	sub {
889	$_[0]{rbuf} =~ s/$eol// or return;	1352	$_[0]{rbuf} =~ s/$eol// or return;
890		1353
891	$cb->($_[0], $1, $2);	1354	$cb->($_[0], $1, $2);
		1355	1
892	1	1356	}
893	}	1357	}
894	};	1358	};
895
896	# compatibility with older API
897	sub push_read_line {
898	my $self = shift;
899	$self->push_read (line => @_);
900	}
901
902	sub unshift_read_line {
903	my $self = shift;
904	$self->unshift_read (line => @_);
905	}
906		1359
907	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)	1360	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
908		1361
909	Makes a regex match against the regex object C<$accept> and returns	1362	Makes a regex match against the regex object C<$accept> and returns
910	everything up to and including the match.	1363	everything up to and including the match.
…		…
960	return 1;	1413	return 1;
961	}	1414	}
962		1415
963	# reject	1416	# reject
964	if ($reject && $$rbuf =~ $reject) {	1417	if ($reject && $$rbuf =~ $reject) {
965	$self->_error (&Errno::EBADMSG);	1418	$self->_error (Errno::EBADMSG);
966	}	1419	}
967		1420
968	# skip	1421	# skip
969	if ($skip && $$rbuf =~ $skip) {	1422	if ($skip && $$rbuf =~ $skip) {
970	$data .= substr $$rbuf, 0, $+[0], "";	1423	$data .= substr $$rbuf, 0, $+[0], "";
…		…
986	my ($self, $cb) = @_;	1439	my ($self, $cb) = @_;
987		1440
988	sub {	1441	sub {
989	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1442	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
990	if ($_[0]{rbuf} =~ /[^0-9]/) {	1443	if ($_[0]{rbuf} =~ /[^0-9]/) {
991	$self->_error (&Errno::EBADMSG);	1444	$self->_error (Errno::EBADMSG);
992	}	1445	}
993	return;	1446	return;
994	}	1447	}
995		1448
996	my $len = $1;	1449	my $len = $1;
…		…
999	my $string = $_[1];	1452	my $string = $_[1];
1000	$_[0]->unshift_read (chunk => 1, sub {	1453	$_[0]->unshift_read (chunk => 1, sub {
1001	if ($_[1] eq ",") {	1454	if ($_[1] eq ",") {
1002	$cb->($_[0], $string);	1455	$cb->($_[0], $string);
1003	} else {	1456	} else {
1004	$self->_error (&Errno::EBADMSG);	1457	$self->_error (Errno::EBADMSG);
1005	}	1458	}
1006	});	1459	});
1007	});	1460	});
1008		1461
1009	1	1462	1
…		…
1015	An octet string prefixed with an encoded length. The encoding C<$format>	1468	An octet string prefixed with an encoded length. The encoding C<$format>
1016	uses the same format as a Perl C<pack> format, but must specify a single	1469	uses the same format as a Perl C<pack> format, but must specify a single
1017	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an	1470	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
1018	optional C<!>, C<< < >> or C<< > >> modifier).	1471	optional C<!>, C<< < >> or C<< > >> modifier).
1019		1472
1020	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.	1473	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1474	EPP uses a prefix of C<N> (4 octtes).
1021		1475
1022	Example: read a block of data prefixed by its length in BER-encoded	1476	Example: read a block of data prefixed by its length in BER-encoded
1023	format (very efficient).	1477	format (very efficient).
1024		1478
1025	$handle->push_read (packstring => "w", sub {	1479	$handle->push_read (packstring => "w", sub {
…		…
1031	register_read_type packstring => sub {	1485	register_read_type packstring => sub {
1032	my ($self, $cb, $format) = @_;	1486	my ($self, $cb, $format) = @_;
1033		1487
1034	sub {	1488	sub {
1035	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1489	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1036	defined (my $len = eval { unpack $format, $_[0]->{rbuf} })	1490	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
1037	or return;	1491	or return;
1038		1492
		1493	$format = length pack $format, $len;
		1494
		1495	# bypass unshift if we already have the remaining chunk
		1496	if ($format + $len <= length $_[0]{rbuf}) {
		1497	my $data = substr $_[0]{rbuf}, $format, $len;
		1498	substr $_[0]{rbuf}, 0, $format + $len, "";
		1499	$cb->($_[0], $data);
		1500	} else {
1039	# remove prefix	1501	# remove prefix
1040	substr $_[0]->{rbuf}, 0, (length pack $format, $len), "";	1502	substr $_[0]{rbuf}, 0, $format, "";
1041		1503
1042	# read rest	1504	# read remaining chunk
1043	$_[0]->unshift_read (chunk => $len, $cb);	1505	$_[0]->unshift_read (chunk => $len, $cb);
		1506	}
1044		1507
1045	1	1508	1
1046	}	1509	}
1047	};	1510	};
1048		1511
1049	=item json => $cb->($handle, $hash_or_arrayref)	1512	=item json => $cb->($handle, $hash_or_arrayref)
1050		1513
1051	Reads a JSON object or array, decodes it and passes it to the callback.	1514	Reads a JSON object or array, decodes it and passes it to the
		1515	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1052		1516
1053	If a C<json> object was passed to the constructor, then that will be used	1517	If a C<json> object was passed to the constructor, then that will be used
1054	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1518	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1055		1519
1056	This read type uses the incremental parser available with JSON version	1520	This read type uses the incremental parser available with JSON version
…		…
1065	=cut	1529	=cut
1066		1530
1067	register_read_type json => sub {	1531	register_read_type json => sub {
1068	my ($self, $cb) = @_;	1532	my ($self, $cb) = @_;
1069		1533
1070	require JSON;	1534	my $json = $self->{json} ||= json_coder;
1071		1535
1072	my $data;	1536	my $data;
1073	my $rbuf = \$self->{rbuf};	1537	my $rbuf = \$self->{rbuf};
1074		1538
1075	my $json = $self->{json} ||= JSON->new->utf8;
1076
1077	sub {	1539	sub {
1078	my $ref = $json->incr_parse ($self->{rbuf});	1540	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1079		1541
1080	if ($ref) {	1542	if ($ref) {
1081	$self->{rbuf} = $json->incr_text;	1543	$self->{rbuf} = $json->incr_text;
1082	$json->incr_text = "";	1544	$json->incr_text = "";
1083	$cb->($self, $ref);	1545	$cb->($self, $ref);
1084		1546
1085	1	1547	1
		1548	} elsif ($@) {
		1549	# error case
		1550	$json->incr_skip;
		1551
		1552	$self->{rbuf} = $json->incr_text;
		1553	$json->incr_text = "";
		1554
		1555	$self->_error (Errno::EBADMSG);
		1556
		1557	()
1086	} else {	1558	} else {
1087	$self->{rbuf} = "";	1559	$self->{rbuf} = "";
		1560
1088	()	1561	()
1089	}	1562	}
1090	}	1563	}
1091	};	1564	};
1092		1565
…		…
1105		1578
1106	require Storable;	1579	require Storable;
1107		1580
1108	sub {	1581	sub {
1109	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method	1582	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
1110	defined (my $len = eval { unpack "w", $_[0]->{rbuf} })	1583	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
1111	or return;	1584	or return;
1112		1585
		1586	my $format = length pack "w", $len;
		1587
		1588	# bypass unshift if we already have the remaining chunk
		1589	if ($format + $len <= length $_[0]{rbuf}) {
		1590	my $data = substr $_[0]{rbuf}, $format, $len;
		1591	substr $_[0]{rbuf}, 0, $format + $len, "";
		1592	$cb->($_[0], Storable::thaw ($data));
		1593	} else {
1113	# remove prefix	1594	# remove prefix
1114	substr $_[0]->{rbuf}, 0, (length pack "w", $len), "";	1595	substr $_[0]{rbuf}, 0, $format, "";
1115		1596
1116	# read rest	1597	# read remaining chunk
1117	$_[0]->unshift_read (chunk => $len, sub {	1598	$_[0]->unshift_read (chunk => $len, sub {
1118	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1599	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1119	$cb->($_[0], $ref);	1600	$cb->($_[0], $ref);
1120	} else {	1601	} else {
1121	$self->_error (&Errno::EBADMSG);	1602	$self->_error (Errno::EBADMSG);
		1603	}
1122	}	1604	});
1123	});	1605	}
		1606
		1607	1
1124	}	1608	}
1125	};	1609	};
1126		1610
1127	=back	1611	=back
1128		1612
…		…
1158	Note that AnyEvent::Handle will automatically C<start_read> for you when	1642	Note that AnyEvent::Handle will automatically C<start_read> for you when
1159	you change the C<on_read> callback or push/unshift a read callback, and it	1643	you change the C<on_read> callback or push/unshift a read callback, and it
1160	will automatically C<stop_read> for you when neither C<on_read> is set nor	1644	will automatically C<stop_read> for you when neither C<on_read> is set nor
1161	there are any read requests in the queue.	1645	there are any read requests in the queue.
1162		1646
		1647	These methods will have no effect when in TLS mode (as TLS doesn't support
		1648	half-duplex connections).
		1649
1163	=cut	1650	=cut
1164		1651
1165	sub stop_read {	1652	sub stop_read {
1166	my ($self) = @_;	1653	my ($self) = @_;
1167		1654
1168	delete $self->{_rw};	1655	delete $self->{_rw} unless $self->{tls};
1169	}	1656	}
1170		1657
1171	sub start_read {	1658	sub start_read {
1172	my ($self) = @_;	1659	my ($self) = @_;
1173		1660
1174	unless ($self->{_rw} || $self->{_eof}) {	1661	unless ($self->{_rw} || $self->{_eof}) {
1175	Scalar::Util::weaken $self;	1662	Scalar::Util::weaken $self;
1176		1663
1177	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1664	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1178	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1665	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1179	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1666	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
1180		1667
1181	if ($len > 0) {	1668	if ($len > 0) {
1182	$self->{_activity} = AnyEvent->now;	1669	$self->{_activity} = $self->{_ractivity} = AE::now;
1183		1670
1184	$self->{filter_r}	1671	if ($self->{tls}) {
1185	? $self->{filter_r}($self, $rbuf)	1672	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1186	: $self->{_in_drain} || $self->_drain_rbuf;	1673
		1674	&_dotls ($self);
		1675	} else {
		1676	$self->_drain_rbuf;
		1677	}
1187		1678
1188	} elsif (defined $len) {	1679	} elsif (defined $len) {
1189	delete $self->{_rw};	1680	delete $self->{_rw};
1190	$self->{_eof} = 1;	1681	$self->{_eof} = 1;
1191	$self->_drain_rbuf unless $self->{_in_drain};	1682	$self->_drain_rbuf;
1192		1683
1193	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1684	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1194	return $self->_error ($!, 1);	1685	return $self->_error ($!, 1);
1195	}	1686	}
1196	});	1687	};
1197	}	1688	}
1198	}	1689	}
1199		1690
		1691	our $ERROR_SYSCALL;
		1692	our $ERROR_WANT_READ;
		1693
		1694	sub _tls_error {
		1695	my ($self, $err) = @_;
		1696
		1697	return $self->_error ($!, 1)
		1698	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1699
		1700	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1701
		1702	# reduce error string to look less scary
		1703	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1704
		1705	if ($self->{_on_starttls}) {
		1706	(delete $self->{_on_starttls})->($self, undef, $err);
		1707	&_freetls;
		1708	} else {
		1709	&_freetls;
		1710	$self->_error (Errno::EPROTO, 1, $err);
		1711	}
		1712	}
		1713
		1714	# poll the write BIO and send the data if applicable
		1715	# also decode read data if possible
		1716	# this is basiclaly our TLS state machine
		1717	# more efficient implementations are possible with openssl,
		1718	# but not with the buggy and incomplete Net::SSLeay.
1200	sub _dotls {	1719	sub _dotls {
1201	my ($self) = @_;	1720	my ($self) = @_;
1202		1721
1203	my $buf;	1722	my $tmp;
1204		1723
1205	if (length $self->{_tls_wbuf}) {	1724	if (length $self->{_tls_wbuf}) {
1206	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1725	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1207	substr $self->{_tls_wbuf}, 0, $len, "";	1726	substr $self->{_tls_wbuf}, 0, $tmp, "";
1208	}	1727	}
1209	}
1210		1728
		1729	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1730	return $self->_tls_error ($tmp)
		1731	if $tmp != $ERROR_WANT_READ
		1732	&& ($tmp != $ERROR_SYSCALL || $!);
		1733	}
		1734
		1735	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1736	unless (length $tmp) {
		1737	$self->{_on_starttls}
		1738	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		1739	&_freetls;
		1740
		1741	if ($self->{on_stoptls}) {
		1742	$self->{on_stoptls}($self);
		1743	return;
		1744	} else {
		1745	# let's treat SSL-eof as we treat normal EOF
		1746	delete $self->{_rw};
		1747	$self->{_eof} = 1;
		1748	}
		1749	}
		1750
		1751	$self->{_tls_rbuf} .= $tmp;
		1752	$self->_drain_rbuf;
		1753	$self->{tls} or return; # tls session might have gone away in callback
		1754	}
		1755
		1756	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
		1757	return $self->_tls_error ($tmp)
		1758	if $tmp != $ERROR_WANT_READ
		1759	&& ($tmp != $ERROR_SYSCALL || $!);
		1760
1211	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1761	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1212	$self->{wbuf} .= $buf;	1762	$self->{wbuf} .= $tmp;
1213	$self->_drain_wbuf;	1763	$self->_drain_wbuf;
1214	}	1764	}
1215		1765
1216	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	1766	$self->{_on_starttls}
1217	if (length $buf) {	1767	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1218	$self->{rbuf} .= $buf;	1768	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1219	$self->_drain_rbuf unless $self->{_in_drain};
1220	} else {
1221	# let's treat SSL-eof as we treat normal EOF
1222	$self->{_eof} = 1;
1223	$self->_shutdown;
1224	return;
1225	}
1226	}
1227
1228	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
1229
1230	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1231	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1232	return $self->_error ($!, 1);
1233	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
1234	return $self->_error (&Errno::EIO, 1);
1235	}
1236
1237	# all others are fine for our purposes
1238	}
1239	}	1769	}
1240		1770
1241	=item $handle->starttls ($tls[, $tls_ctx])	1771	=item $handle->starttls ($tls[, $tls_ctx])
1242		1772
1243	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1773	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1244	object is created, you can also do that at a later time by calling	1774	object is created, you can also do that at a later time by calling
1245	C<starttls>.	1775	C<starttls>.
1246		1776
		1777	Starting TLS is currently an asynchronous operation - when you push some
		1778	write data and then call C<< ->starttls >> then TLS negotiation will start
		1779	immediately, after which the queued write data is then sent.
		1780
1247	The first argument is the same as the C<tls> constructor argument (either	1781	The first argument is the same as the C<tls> constructor argument (either
1248	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1782	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1249		1783
1250	The second argument is the optional C<Net::SSLeay::CTX> object that is	1784	The second argument is the optional C<AnyEvent::TLS> object that is used
1251	used when AnyEvent::Handle has to create its own TLS connection object.	1785	when AnyEvent::Handle has to create its own TLS connection object, or
		1786	a hash reference with C<< key => value >> pairs that will be used to
		1787	construct a new context.
1252		1788
1253	The TLS connection object will end up in C<< $handle->{tls} >> after this	1789	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1254	call and can be used or changed to your liking. Note that the handshake	1790	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1255	might have already started when this function returns.	1791	changed to your liking. Note that the handshake might have already started
		1792	when this function returns.
1256		1793
		1794	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		1795	handshakes on the same stream. Best do not attempt to use the stream after
		1796	stopping TLS.
		1797
1257	=cut	1798	=cut
		1799
		1800	our %TLS_CACHE; #TODO not yet documented, should we?
1258		1801
1259	sub starttls {	1802	sub starttls {
1260	my ($self, $ssl, $ctx) = @_;	1803	my ($self, $tls, $ctx) = @_;
1261		1804
1262	$self->stoptls;	1805	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1806	if $self->{tls};
1263		1807
1264	if ($ssl eq "accept") {	1808	$self->{tls} = $tls;
1265	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1809	$self->{tls_ctx} = $ctx if @_ > 2;
1266	Net::SSLeay::set_accept_state ($ssl);	1810
1267	} elsif ($ssl eq "connect") {	1811	return unless $self->{fh};
1268	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1812
1269	Net::SSLeay::set_connect_state ($ssl);	1813	require Net::SSLeay;
		1814
		1815	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		1816	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1817
		1818	$tls = delete $self->{tls};
		1819	$ctx = $self->{tls_ctx};
		1820
		1821	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1822
		1823	if ("HASH" eq ref $ctx) {
		1824	require AnyEvent::TLS;
		1825
		1826	if ($ctx->{cache}) {
		1827	my $key = $ctx+0;
		1828	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1829	} else {
		1830	$ctx = new AnyEvent::TLS %$ctx;
		1831	}
		1832	}
1270	}	1833
1271		1834	$self->{tls_ctx} = $ctx || TLS_CTX ();
1272	$self->{tls} = $ssl;	1835	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1273		1836
1274	# basically, this is deep magic (because SSL_read should have the same issues)	1837	# basically, this is deep magic (because SSL_read should have the same issues)
1275	# but the openssl maintainers basically said: "trust us, it just works".	1838	# but the openssl maintainers basically said: "trust us, it just works".
1276	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1839	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1277	# and mismaintained ssleay-module doesn't even offer them).	1840	# and mismaintained ssleay-module doesn't even offer them).
1278	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1841	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1842	#
		1843	# in short: this is a mess.
		1844	#
		1845	# note that we do not try to keep the length constant between writes as we are required to do.
		1846	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1847	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1848	# have identity issues in that area.
1279	Net::SSLeay::CTX_set_mode ($self->{tls},	1849	# Net::SSLeay::CTX_set_mode ($ssl,
1280	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1850	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1281	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1851	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1852	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1282		1853
1283	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1854	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1284	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1855	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1285		1856
		1857	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1858
1286	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1859	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1287		1860
1288	$self->{filter_w} = sub {	1861	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1289	$_[0]{_tls_wbuf} .= ${$_[1]};	1862	if $self->{on_starttls};
1290	&_dotls;	1863
1291	};	1864	&_dotls; # need to trigger the initial handshake
1292	$self->{filter_r} = sub {	1865	$self->start_read; # make sure we actually do read
1293	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1294	&_dotls;
1295	};
1296	}	1866	}
1297		1867
1298	=item $handle->stoptls	1868	=item $handle->stoptls
1299		1869
1300	Destroys the SSL connection, if any. Partial read or write data will be	1870	Shuts down the SSL connection - this makes a proper EOF handshake by
1301	lost.	1871	sending a close notify to the other side, but since OpenSSL doesn't
		1872	support non-blocking shut downs, it is not guarenteed that you can re-use
		1873	the stream afterwards.
1302		1874
1303	=cut	1875	=cut
1304		1876
1305	sub stoptls {	1877	sub stoptls {
1306	my ($self) = @_;	1878	my ($self) = @_;
1307		1879
1308	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1880	if ($self->{tls}) {
		1881	Net::SSLeay::shutdown ($self->{tls});
1309		1882
1310	delete $self->{_rbio};	1883	&_dotls;
1311	delete $self->{_wbio};	1884
1312	delete $self->{_tls_wbuf};	1885	# # we don't give a shit. no, we do, but we can't. no...#d#
1313	delete $self->{filter_r};	1886	# # we, we... have to use openssl :/#d#
1314	delete $self->{filter_w};	1887	# &_freetls;#d#
		1888	}
		1889	}
		1890
		1891	sub _freetls {
		1892	my ($self) = @_;
		1893
		1894	return unless $self->{tls};
		1895
		1896	$self->{tls_ctx}->_put_session (delete $self->{tls})
		1897	if $self->{tls} > 0;
		1898
		1899	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1315	}	1900	}
1316		1901
1317	sub DESTROY {	1902	sub DESTROY {
1318	my $self = shift;	1903	my ($self) = @_;
1319		1904
1320	$self->stoptls;	1905	&_freetls;
1321		1906
1322	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	1907	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1323		1908
1324	if ($linger && length $self->{wbuf}) {	1909	if ($linger && length $self->{wbuf} && $self->{fh}) {
1325	my $fh = delete $self->{fh};	1910	my $fh = delete $self->{fh};
1326	my $wbuf = delete $self->{wbuf};	1911	my $wbuf = delete $self->{wbuf};
1327		1912
1328	my @linger;	1913	my @linger;
1329		1914
1330	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	1915	push @linger, AE::io $fh, 1, sub {
1331	my $len = syswrite $fh, $wbuf, length $wbuf;	1916	my $len = syswrite $fh, $wbuf, length $wbuf;
1332		1917
1333	if ($len > 0) {	1918	if ($len > 0) {
1334	substr $wbuf, 0, $len, "";	1919	substr $wbuf, 0, $len, "";
1335	} else {	1920	} else {
1336	@linger = (); # end	1921	@linger = (); # end
1337	}	1922	}
1338	});	1923	};
1339	push @linger, AnyEvent->timer (after => $linger, cb => sub {	1924	push @linger, AE::timer $linger, 0, sub {
1340	@linger = ();	1925	@linger = ();
1341	});	1926	};
1342	}	1927	}
		1928	}
		1929
		1930	=item $handle->destroy
		1931
		1932	Shuts down the handle object as much as possible - this call ensures that
		1933	no further callbacks will be invoked and as many resources as possible
		1934	will be freed. Any method you will call on the handle object after
		1935	destroying it in this way will be silently ignored (and it will return the
		1936	empty list).
		1937
		1938	Normally, you can just "forget" any references to an AnyEvent::Handle
		1939	object and it will simply shut down. This works in fatal error and EOF
		1940	callbacks, as well as code outside. It does I<NOT> work in a read or write
		1941	callback, so when you want to destroy the AnyEvent::Handle object from
		1942	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		1943	that case.
		1944
		1945	Destroying the handle object in this way has the advantage that callbacks
		1946	will be removed as well, so if those are the only reference holders (as
		1947	is common), then one doesn't need to do anything special to break any
		1948	reference cycles.
		1949
		1950	The handle might still linger in the background and write out remaining
		1951	data, as specified by the C<linger> option, however.
		1952
		1953	=cut
		1954
		1955	sub destroy {
		1956	my ($self) = @_;
		1957
		1958	$self->DESTROY;
		1959	%$self = ();
		1960	bless $self, "AnyEvent::Handle::destroyed";
		1961	}
		1962
		1963	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		1964	#nop
1343	}	1965	}
1344		1966
1345	=item AnyEvent::Handle::TLS_CTX	1967	=item AnyEvent::Handle::TLS_CTX
1346		1968
1347	This function creates and returns the Net::SSLeay::CTX object used by	1969	This function creates and returns the AnyEvent::TLS object used by default
1348	default for TLS mode.	1970	for TLS mode.
1349		1971
1350	The context is created like this:	1972	The context is created by calling L<AnyEvent::TLS> without any arguments.
1351
1352	Net::SSLeay::load_error_strings;
1353	Net::SSLeay::SSLeay_add_ssl_algorithms;
1354	Net::SSLeay::randomize;
1355
1356	my $CTX = Net::SSLeay::CTX_new;
1357
1358	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1359		1973
1360	=cut	1974	=cut
1361		1975
1362	our $TLS_CTX;	1976	our $TLS_CTX;
1363		1977
1364	sub TLS_CTX() {	1978	sub TLS_CTX() {
1365	$TLS_CTX || do {	1979	$TLS_CTX ||= do {
1366	require Net::SSLeay;	1980	require AnyEvent::TLS;
1367		1981
1368	Net::SSLeay::load_error_strings ();	1982	new AnyEvent::TLS
1369	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1370	Net::SSLeay::randomize ();
1371
1372	$TLS_CTX = Net::SSLeay::CTX_new ();
1373
1374	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1375
1376	$TLS_CTX
1377	}	1983	}
1378	}	1984	}
1379		1985
1380	=back	1986	=back
		1987
		1988
		1989	=head1 NONFREQUENTLY ASKED QUESTIONS
		1990
		1991	=over 4
		1992
		1993	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		1994	still get further invocations!
		1995
		1996	That's because AnyEvent::Handle keeps a reference to itself when handling
		1997	read or write callbacks.
		1998
		1999	It is only safe to "forget" the reference inside EOF or error callbacks,
		2000	from within all other callbacks, you need to explicitly call the C<<
		2001	->destroy >> method.
		2002
		2003	=item I get different callback invocations in TLS mode/Why can't I pause
		2004	reading?
		2005
		2006	Unlike, say, TCP, TLS connections do not consist of two independent
		2007	communication channels, one for each direction. Or put differently. The
		2008	read and write directions are not independent of each other: you cannot
		2009	write data unless you are also prepared to read, and vice versa.
		2010
		2011	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		2012	callback invocations when you are not expecting any read data - the reason
		2013	is that AnyEvent::Handle always reads in TLS mode.
		2014
		2015	During the connection, you have to make sure that you always have a
		2016	non-empty read-queue, or an C<on_read> watcher. At the end of the
		2017	connection (or when you no longer want to use it) you can call the
		2018	C<destroy> method.
		2019
		2020	=item How do I read data until the other side closes the connection?
		2021
		2022	If you just want to read your data into a perl scalar, the easiest way
		2023	to achieve this is by setting an C<on_read> callback that does nothing,
		2024	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		2025	will be in C<$_[0]{rbuf}>:
		2026
		2027	$handle->on_read (sub { });
		2028	$handle->on_eof (undef);
		2029	$handle->on_error (sub {
		2030	my $data = delete $_[0]{rbuf};
		2031	});
		2032
		2033	The reason to use C<on_error> is that TCP connections, due to latencies
		2034	and packets loss, might get closed quite violently with an error, when in
		2035	fact, all data has been received.
		2036
		2037	It is usually better to use acknowledgements when transferring data,
		2038	to make sure the other side hasn't just died and you got the data
		2039	intact. This is also one reason why so many internet protocols have an
		2040	explicit QUIT command.
		2041
		2042	=item I don't want to destroy the handle too early - how do I wait until
		2043	all data has been written?
		2044
		2045	After writing your last bits of data, set the C<on_drain> callback
		2046	and destroy the handle in there - with the default setting of
		2047	C<low_water_mark> this will be called precisely when all data has been
		2048	written to the socket:
		2049
		2050	$handle->push_write (...);
		2051	$handle->on_drain (sub {
		2052	warn "all data submitted to the kernel\n";
		2053	undef $handle;
		2054	});
		2055
		2056	If you just want to queue some data and then signal EOF to the other side,
		2057	consider using C<< ->push_shutdown >> instead.
		2058
		2059	=item I want to contact a TLS/SSL server, I don't care about security.
		2060
		2061	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2062	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		2063	parameter:
		2064
		2065	tcp_connect $host, $port, sub {
		2066	my ($fh) = @_;
		2067
		2068	my $handle = new AnyEvent::Handle
		2069	fh => $fh,
		2070	tls => "connect",
		2071	on_error => sub { ... };
		2072
		2073	$handle->push_write (...);
		2074	};
		2075
		2076	=item I want to contact a TLS/SSL server, I do care about security.
		2077
		2078	Then you should additionally enable certificate verification, including
		2079	peername verification, if the protocol you use supports it (see
		2080	L<AnyEvent::TLS>, C<verify_peername>).
		2081
		2082	E.g. for HTTPS:
		2083
		2084	tcp_connect $host, $port, sub {
		2085	my ($fh) = @_;
		2086
		2087	my $handle = new AnyEvent::Handle
		2088	fh => $fh,
		2089	peername => $host,
		2090	tls => "connect",
		2091	tls_ctx => { verify => 1, verify_peername => "https" },
		2092	...
		2093
		2094	Note that you must specify the hostname you connected to (or whatever
		2095	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2096	peername verification will be done.
		2097
		2098	The above will use the system-dependent default set of trusted CA
		2099	certificates. If you want to check against a specific CA, add the
		2100	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2101
		2102	tls_ctx => {
		2103	verify => 1,
		2104	verify_peername => "https",
		2105	ca_file => "my-ca-cert.pem",
		2106	},
		2107
		2108	=item I want to create a TLS/SSL server, how do I do that?
		2109
		2110	Well, you first need to get a server certificate and key. You have
		2111	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2112	self-signed certificate (cheap. check the search engine of your choice,
		2113	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2114	nice program for that purpose).
		2115
		2116	Then create a file with your private key (in PEM format, see
		2117	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2118	file should then look like this:
		2119
		2120	-----BEGIN RSA PRIVATE KEY-----
		2121	...header data
		2122	... lots of base64'y-stuff
		2123	-----END RSA PRIVATE KEY-----
		2124
		2125	-----BEGIN CERTIFICATE-----
		2126	... lots of base64'y-stuff
		2127	-----END CERTIFICATE-----
		2128
		2129	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2130	specify this file as C<cert_file>:
		2131
		2132	tcp_server undef, $port, sub {
		2133	my ($fh) = @_;
		2134
		2135	my $handle = new AnyEvent::Handle
		2136	fh => $fh,
		2137	tls => "accept",
		2138	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2139	...
		2140
		2141	When you have intermediate CA certificates that your clients might not
		2142	know about, just append them to the C<cert_file>.
		2143
		2144	=back
		2145
1381		2146
1382	=head1 SUBCLASSING AnyEvent::Handle	2147	=head1 SUBCLASSING AnyEvent::Handle
1383		2148
1384	In many cases, you might want to subclass AnyEvent::Handle.	2149	In many cases, you might want to subclass AnyEvent::Handle.
1385		2150
…		…
1389	=over 4	2154	=over 4
1390		2155
1391	=item * all constructor arguments become object members.	2156	=item * all constructor arguments become object members.
1392		2157
1393	At least initially, when you pass a C<tls>-argument to the constructor it	2158	At least initially, when you pass a C<tls>-argument to the constructor it
1394	will end up in C<< $handle->{tls} >>. Those members might be changes or	2159	will end up in C<< $handle->{tls} >>. Those members might be changed or
1395	mutated later on (for example C<tls> will hold the TLS connection object).	2160	mutated later on (for example C<tls> will hold the TLS connection object).
1396		2161
1397	=item * other object member names are prefixed with an C<_>.	2162	=item * other object member names are prefixed with an C<_>.
1398		2163
1399	All object members not explicitly documented (internal use) are prefixed	2164	All object members not explicitly documented (internal use) are prefixed

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines