[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.83 by root, Thu Aug 21 19:11:37 2008 UTC vs.
Revision 1.155 by root, Mon Jul 20 22:39:57 2009 UTC

…		…
1	package AnyEvent::Handle;	1	package AnyEvent::Handle;
2		2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();	3	use Scalar::Util ();
9	use Carp ();	4	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);	5	use Errno qw(EAGAIN EINTR);
12		6
		7	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		8	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		9
13	=head1 NAME	10	=head1 NAME
14		11
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	12	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16		13
17	=cut	14	=cut
18		15
19	our $VERSION = 4.232;	16	our $VERSION = 4.86;
20		17
21	=head1 SYNOPSIS	18	=head1 SYNOPSIS
22		19
23	use AnyEvent;	20	use AnyEvent;
24	use AnyEvent::Handle;	21	use AnyEvent::Handle;
25		22
26	my $cv = AnyEvent->condvar;	23	my $cv = AnyEvent->condvar;
27		24
28	my $handle =	25	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	26	fh => \*STDIN,
31	on_eof => sub {	27	on_error => sub {
32	$cv->broadcast;	28	my ($hdl, $fatal, $msg) = @_;
33	},	29	warn "got error $msg\n";
		30	$hdl->destroy;
		31	$cv->send;
34	);	32	);
35		33
36	# send some request line	34	# send some request line
37	$handle->push_write ("getinfo\015\012");	35	$hdl->push_write ("getinfo\015\012");
38		36
39	# read the response line	37	# read the response line
40	$handle->push_read (line => sub {	38	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	39	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	40	warn "got line <$line>\n";
43	$cv->send;	41	$cv->send;
44	});	42	});
45		43
46	$cv->recv;	44	$cv->recv;
47		45
49		47
50	This module is a helper module to make it easier to do event-based I/O on	48	This module is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	49	filehandles. For utility functions for doing non-blocking connects and accepts
52	on sockets see L<AnyEvent::Util>.	50	on sockets see L<AnyEvent::Util>.
53		51
		52	The L<AnyEvent::Intro> tutorial contains some well-documented
		53	AnyEvent::Handle examples.
		54
54	In the following, when the documentation refers to of "bytes" then this	55	In the following, when the documentation refers to of "bytes" then this
55	means characters. As sysread and syswrite are used for all I/O, their	56	means characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	57	treatment of characters applies to this module as well.
57		58
58	All callbacks will be invoked with the handle object as their first	59	All callbacks will be invoked with the handle object as their first
…		…
60		61
61	=head1 METHODS	62	=head1 METHODS
62		63
63	=over 4	64	=over 4
64		65
65	=item B<new (%args)>	66	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
66		67
67	The constructor supports these arguments (all as key => value pairs).	68	The constructor supports these arguments (all as C<< key => value >> pairs).
68		69
69	=over 4	70	=over 4
70		71
71	=item fh => $filehandle [MANDATORY]	72	=item fh => $filehandle [MANDATORY]
72		73
…		…
78		79
79	=item on_eof => $cb->($handle)	80	=item on_eof => $cb->($handle)
80		81
81	Set the callback to be called when an end-of-file condition is detected,	82	Set the callback to be called when an end-of-file condition is detected,
82	i.e. in the case of a socket, when the other side has closed the	83	i.e. in the case of a socket, when the other side has closed the
83	connection cleanly.	84	connection cleanly, and there are no outstanding read requests in the
		85	queue (if there are read requests, then an EOF counts as an unexpected
		86	connection close and will be flagged as an error).
84		87
85	For sockets, this just means that the other side has stopped sending data,	88	For sockets, this just means that the other side has stopped sending data,
86	you can still try to write data, and, in fact, one can return from the eof	89	you can still try to write data, and, in fact, one can return from the EOF
87	callback and continue writing data, as only the read part has been shut	90	callback and continue writing data, as only the read part has been shut
88	down.	91	down.
89		92
90	While not mandatory, it is I<highly> recommended to set an eof callback,
91	otherwise you might end up with a closed socket while you are still
92	waiting for data.
93
94	If an EOF condition has been detected but no C<on_eof> callback has been	93	If an EOF condition has been detected but no C<on_eof> callback has been
95	set, then a fatal error will be raised with C<$!> set to <0>.	94	set, then a fatal error will be raised with C<$!> set to <0>.
96		95
97	=item on_error => $cb->($handle, $fatal)	96	=item on_error => $cb->($handle, $fatal, $message)
98		97
99	This is the error callback, which is called when, well, some error	98	This is the error callback, which is called when, well, some error
100	occured, such as not being able to resolve the hostname, failure to	99	occured, such as not being able to resolve the hostname, failure to
101	connect or a read error.	100	connect or a read error.
102		101
103	Some errors are fatal (which is indicated by C<$fatal> being true). On	102	Some errors are fatal (which is indicated by C<$fatal> being true). On
104	fatal errors the handle object will be shut down and will not be usable	103	fatal errors the handle object will be destroyed (by a call to C<< ->
105	(but you are free to look at the current C< ->rbuf >). Examples of fatal	104	destroy >>) after invoking the error callback (which means you are free to
106	errors are an EOF condition with active (but unsatisifable) read watchers	105	examine the handle object). Examples of fatal errors are an EOF condition
107	(C<EPIPE>) or I/O errors.	106	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors.
		107
		108	AnyEvent::Handle tries to find an appropriate error code for you to check
		109	against, but in some cases (TLS errors), this does not work well. It is
		110	recommended to always output the C<$message> argument in human-readable
		111	error messages (it's usually the same as C<"$!">).
108		112
109	Non-fatal errors can be retried by simply returning, but it is recommended	113	Non-fatal errors can be retried by simply returning, but it is recommended
110	to simply ignore this parameter and instead abondon the handle object	114	to simply ignore this parameter and instead abondon the handle object
111	when this callback is invoked. Examples of non-fatal errors are timeouts	115	when this callback is invoked. Examples of non-fatal errors are timeouts
112	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).	116	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
113		117
114	On callback entrance, the value of C<$!> contains the operating system	118	On callback entrance, the value of C<$!> contains the operating system
115	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	119	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		120	C<EPROTO>).
116		121
117	While not mandatory, it is I<highly> recommended to set this callback, as	122	While not mandatory, it is I<highly> recommended to set this callback, as
118	you will not be notified of errors otherwise. The default simply calls	123	you will not be notified of errors otherwise. The default simply calls
119	C<croak>.	124	C<croak>.
120		125
…		…
124	and no read request is in the queue (unlike read queue callbacks, this	129	and no read request is in the queue (unlike read queue callbacks, this
125	callback will only be called when at least one octet of data is in the	130	callback will only be called when at least one octet of data is in the
126	read buffer).	131	read buffer).
127		132
128	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	133	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
129	method or access the C<$handle->{rbuf}> member directly.	134	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		135	must not enlarge or modify the read buffer, you can only remove data at
		136	the beginning from it.
130		137
131	When an EOF condition is detected then AnyEvent::Handle will first try to	138	When an EOF condition is detected then AnyEvent::Handle will first try to
132	feed all the remaining data to the queued callbacks and C<on_read> before	139	feed all the remaining data to the queued callbacks and C<on_read> before
133	calling the C<on_eof> callback. If no progress can be made, then a fatal	140	calling the C<on_eof> callback. If no progress can be made, then a fatal
134	error will be raised (with C<$!> set to C<EPIPE>).	141	error will be raised (with C<$!> set to C<EPIPE>).
		142
		143	Note that, unlike requests in the read queue, an C<on_read> callback
		144	doesn't mean you I<require> some data: if there is an EOF and there
		145	are outstanding read requests then an error will be flagged. With an
		146	C<on_read> callback, the C<on_eof> callback will be invoked.
135		147
136	=item on_drain => $cb->($handle)	148	=item on_drain => $cb->($handle)
137		149
138	This sets the callback that is called when the write buffer becomes empty	150	This sets the callback that is called when the write buffer becomes empty
139	(or when the callback is set and the buffer is empty already).	151	(or when the callback is set and the buffer is empty already).
…		…
149	=item timeout => $fractional_seconds	161	=item timeout => $fractional_seconds
150		162
151	If non-zero, then this enables an "inactivity" timeout: whenever this many	163	If non-zero, then this enables an "inactivity" timeout: whenever this many
152	seconds pass without a successful read or write on the underlying file	164	seconds pass without a successful read or write on the underlying file
153	handle, the C<on_timeout> callback will be invoked (and if that one is	165	handle, the C<on_timeout> callback will be invoked (and if that one is
154	missing, an C<ETIMEDOUT> error will be raised).	166	missing, a non-fatal C<ETIMEDOUT> error will be raised).
155		167
156	Note that timeout processing is also active when you currently do not have	168	Note that timeout processing is also active when you currently do not have
157	any outstanding read or write requests: If you plan to keep the connection	169	any outstanding read or write requests: If you plan to keep the connection
158	idle then you should disable the timout temporarily or ignore the timeout	170	idle then you should disable the timout temporarily or ignore the timeout
159	in the C<on_timeout> callback.	171	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		172	restart the timeout.
160		173
161	Zero (the default) disables this timeout.	174	Zero (the default) disables this timeout.
162		175
163	=item on_timeout => $cb->($handle)	176	=item on_timeout => $cb->($handle)
164		177
…		…
168		181
169	=item rbuf_max => <bytes>	182	=item rbuf_max => <bytes>
170		183
171	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	184	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
172	when the read buffer ever (strictly) exceeds this size. This is useful to	185	when the read buffer ever (strictly) exceeds this size. This is useful to
173	avoid denial-of-service attacks.	186	avoid some forms of denial-of-service attacks.
174		187
175	For example, a server accepting connections from untrusted sources should	188	For example, a server accepting connections from untrusted sources should
176	be configured to accept only so-and-so much data that it cannot act on	189	be configured to accept only so-and-so much data that it cannot act on
177	(for example, when expecting a line, an attacker could send an unlimited	190	(for example, when expecting a line, an attacker could send an unlimited
178	amount of data without a callback ever being called as long as the line	191	amount of data without a callback ever being called as long as the line
179	isn't finished).	192	isn't finished).
180		193
181	=item autocork => <boolean>	194	=item autocork => <boolean>
182		195
183	When disabled (the default), then C<push_write> will try to immediately	196	When disabled (the default), then C<push_write> will try to immediately
184	write the data to the handle if possible. This avoids having to register	197	write the data to the handle, if possible. This avoids having to register
185	a write watcher and wait for the next event loop iteration, but can be	198	a write watcher and wait for the next event loop iteration, but can
186	inefficient if you write multiple small chunks (this disadvantage is	199	be inefficient if you write multiple small chunks (on the wire, this
187	usually avoided by your kernel's nagle algorithm, see C<low_delay>).	200	disadvantage is usually avoided by your kernel's nagle algorithm, see
		201	C<no_delay>, but this option can save costly syscalls).
188		202
189	When enabled, then writes will always be queued till the next event loop	203	When enabled, then writes will always be queued till the next event loop
190	iteration. This is efficient when you do many small writes per iteration,	204	iteration. This is efficient when you do many small writes per iteration,
191	but less efficient when you do a single write only.	205	but less efficient when you do a single write only per iteration (or when
		206	the write buffer often is full). It also increases write latency.
192		207
193	=item no_delay => <boolean>	208	=item no_delay => <boolean>
194		209
195	When doing small writes on sockets, your operating system kernel might	210	When doing small writes on sockets, your operating system kernel might
196	wait a bit for more data before actually sending it out. This is called	211	wait a bit for more data before actually sending it out. This is called
197	the Nagle algorithm, and usually it is beneficial.	212	the Nagle algorithm, and usually it is beneficial.
198		213
199	In some situations you want as low a delay as possible, which cna be	214	In some situations you want as low a delay as possible, which can be
200	accomplishd by setting this option to true.	215	accomplishd by setting this option to a true value.
201		216
202	The default is your opertaing system's default behaviour, this option	217	The default is your opertaing system's default behaviour (most likely
203	explicitly enables or disables it, if possible.	218	enabled), this option explicitly enables or disables it, if possible.
204		219
205	=item read_size => <bytes>	220	=item read_size => <bytes>
206		221
207	The default read block size (the amount of bytes this module will try to read	222	The default read block size (the amount of bytes this module will
208	during each (loop iteration). Default: C<8192>.	223	try to read during each loop iteration, which affects memory
		224	requirements). Default: C<8192>.
209		225
210	=item low_water_mark => <bytes>	226	=item low_water_mark => <bytes>
211		227
212	Sets the amount of bytes (default: C<0>) that make up an "empty" write	228	Sets the amount of bytes (default: C<0>) that make up an "empty" write
213	buffer: If the write reaches this size or gets even samller it is	229	buffer: If the write reaches this size or gets even samller it is
214	considered empty.	230	considered empty.
215		231
		232	Sometimes it can be beneficial (for performance reasons) to add data to
		233	the write buffer before it is fully drained, but this is a rare case, as
		234	the operating system kernel usually buffers data as well, so the default
		235	is good in almost all cases.
		236
216	=item linger => <seconds>	237	=item linger => <seconds>
217		238
218	If non-zero (default: C<3600>), then the destructor of the	239	If non-zero (default: C<3600>), then the destructor of the
219	AnyEvent::Handle object will check wether there is still outstanding write	240	AnyEvent::Handle object will check whether there is still outstanding
220	data and will install a watcher that will write out this data. No errors	241	write data and will install a watcher that will write this data to the
221	will be reported (this mostly matches how the operating system treats	242	socket. No errors will be reported (this mostly matches how the operating
222	outstanding data at socket close time).	243	system treats outstanding data at socket close time).
223		244
224	This will not work for partial TLS data that could not yet been	245	This will not work for partial TLS data that could not be encoded
225	encoded. This data will be lost.	246	yet. This data will be lost. Calling the C<stoptls> method in time might
		247	help.
		248
		249	=item peername => $string
		250
		251	A string used to identify the remote site - usually the DNS hostname
		252	(I<not> IDN!) used to create the connection, rarely the IP address.
		253
		254	Apart from being useful in error messages, this string is also used in TLS
		255	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		256	verification will be skipped when C<peername> is not specified or
		257	C<undef>.
226		258
227	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object	259	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object
228		260
229	When this parameter is given, it enables TLS (SSL) mode, that means it	261	When this parameter is given, it enables TLS (SSL) mode, that means
230	will start making tls handshake and will transparently encrypt/decrypt	262	AnyEvent will start a TLS handshake as soon as the conenction has been
231	data.	263	established and will transparently encrypt/decrypt data afterwards.
		264
		265	All TLS protocol errors will be signalled as C<EPROTO>, with an
		266	appropriate error message.
232		267
233	TLS mode requires Net::SSLeay to be installed (it will be loaded	268	TLS mode requires Net::SSLeay to be installed (it will be loaded
234	automatically when you try to create a TLS handle).	269	automatically when you try to create a TLS handle): this module doesn't
		270	have a dependency on that module, so if your module requires it, you have
		271	to add the dependency yourself.
235		272
236	For the TLS server side, use C<accept>, and for the TLS client side of a	273	Unlike TCP, TLS has a server and client side: for the TLS server side, use
237	connection, use C<connect> mode.	274	C<accept>, and for the TLS client side of a connection, use C<connect>
		275	mode.
238		276
239	You can also provide your own TLS connection object, but you have	277	You can also provide your own TLS connection object, but you have
240	to make sure that you call either C<Net::SSLeay::set_connect_state>	278	to make sure that you call either C<Net::SSLeay::set_connect_state>
241	or C<Net::SSLeay::set_accept_state> on it before you pass it to	279	or C<Net::SSLeay::set_accept_state> on it before you pass it to
242	AnyEvent::Handle.	280	AnyEvent::Handle. Also, this module will take ownership of this connection
		281	object.
243		282
		283	At some future point, AnyEvent::Handle might switch to another TLS
		284	implementation, then the option to use your own session object will go
		285	away.
		286
		287	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		288	passing in the wrong integer will lead to certain crash. This most often
		289	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		290	segmentation fault.
		291
244	See the C<starttls> method if you need to start TLS negotiation later.	292	See the C<< ->starttls >> method for when need to start TLS negotiation later.
245		293
246	=item tls_ctx => $ssl_ctx	294	=item tls_ctx => $anyevent_tls
247		295
248	Use the given Net::SSLeay::CTX object to create the new TLS connection	296	Use the given C<AnyEvent::TLS> object to create the new TLS connection
249	(unless a connection object was specified directly). If this parameter is	297	(unless a connection object was specified directly). If this parameter is
250	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	298	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
251		299
		300	Instead of an object, you can also specify a hash reference with C<< key
		301	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		302	new TLS context object.
		303
		304	=item on_starttls => $cb->($handle, $success[, $error_message])
		305
		306	This callback will be invoked when the TLS/SSL handshake has finished. If
		307	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		308	(C<on_stoptls> will not be called in this case).
		309
		310	The session in C<< $handle->{tls} >> can still be examined in this
		311	callback, even when the handshake was not successful.
		312
		313	TLS handshake failures will not cause C<on_error> to be invoked when this
		314	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		315
		316	Without this callback, handshake failures lead to C<on_error> being
		317	called, as normal.
		318
		319	Note that you cannot call C<starttls> right again in this callback. If you
		320	need to do that, start an zero-second timer instead whose callback can
		321	then call C<< ->starttls >> again.
		322
		323	=item on_stoptls => $cb->($handle)
		324
		325	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		326	set, then it will be invoked after freeing the TLS session. If it is not,
		327	then a TLS shutdown condition will be treated like a normal EOF condition
		328	on the handle.
		329
		330	The session in C<< $handle->{tls} >> can still be examined in this
		331	callback.
		332
		333	This callback will only be called on TLS shutdowns, not when the
		334	underlying handle signals EOF.
		335
252	=item json => JSON or JSON::XS object	336	=item json => JSON or JSON::XS object
253		337
254	This is the json coder object used by the C<json> read and write types.	338	This is the json coder object used by the C<json> read and write types.
255		339
256	If you don't supply it, then AnyEvent::Handle will create and use a	340	If you don't supply it, then AnyEvent::Handle will create and use a
257	suitable one, which will write and expect UTF-8 encoded JSON texts.	341	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		342	texts.
258		343
259	Note that you are responsible to depend on the JSON module if you want to	344	Note that you are responsible to depend on the JSON module if you want to
260	use this functionality, as AnyEvent does not have a dependency itself.	345	use this functionality, as AnyEvent does not have a dependency itself.
261		346
262	=item filter_r => $cb
263
264	=item filter_w => $cb
265
266	These exist, but are undocumented at this time.
267
268	=back	347	=back
269		348
270	=cut	349	=cut
271		350
272	sub new {	351	sub new {
273	my $class = shift;	352	my $class = shift;
274
275	my $self = bless { @_ }, $class;	353	my $self = bless { @_ }, $class;
276		354
277	$self->{fh} or Carp::croak "mandatory argument fh is missing";	355	$self->{fh} or Carp::croak "mandatory argument fh is missing";
278		356
279	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	357	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
280
281	if ($self->{tls}) {
282	require Net::SSLeay;
283	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});
284	}
285		358
286	$self->{_activity} = AnyEvent->now;	359	$self->{_activity} = AnyEvent->now;
287	$self->_timeout;	360	$self->_timeout;
288		361
289	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};
290	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};	362	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
		363
		364	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
		365	if $self->{tls};
		366
		367	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
291		368
292	$self->start_read	369	$self->start_read
293	if $self->{on_read};	370	if $self->{on_read};
294		371
295	$self	372	$self->{fh} && $self
296	}	373	}
297		374
298	sub _shutdown {	375	#sub _shutdown {
299	my ($self) = @_;	376	# my ($self) = @_;
300		377	#
301	delete $self->{_tw};	378	# delete @$self{qw(_tw _rw _ww fh wbuf on_read _queue)};
302	delete $self->{_rw};	379	# $self->{_eof} = 1; # tell starttls et. al to stop trying
303	delete $self->{_ww};	380	#
304	delete $self->{fh};	381	# &_freetls;
305		382	#}
306	$self->stoptls;
307
308	delete $self->{on_read};
309	delete $self->{_queue};
310	}
311		383
312	sub _error {	384	sub _error {
313	my ($self, $errno, $fatal) = @_;	385	my ($self, $errno, $fatal, $message) = @_;
314
315	$self->_shutdown
316	if $fatal;
317		386
318	$! = $errno;	387	$! = $errno;
		388	$message \|\|= "$!";
319		389
320	if ($self->{on_error}) {	390	if ($self->{on_error}) {
321	$self->{on_error}($self, $fatal);	391	$self->{on_error}($self, $fatal, $message);
322	} else {	392	$self->destroy if $fatal;
		393	} elsif ($self->{fh}) {
		394	$self->destroy;
323	Carp::croak "AnyEvent::Handle uncaught error: $!";	395	Carp::croak "AnyEvent::Handle uncaught error: $message";
324	}	396	}
325	}	397	}
326		398
327	=item $fh = $handle->fh	399	=item $fh = $handle->fh
328		400
329	This method returns the file handle of the L<AnyEvent::Handle> object.	401	This method returns the file handle used to create the L<AnyEvent::Handle> object.
330		402
331	=cut	403	=cut
332		404
333	sub fh { $_[0]{fh} }	405	sub fh { $_[0]{fh} }
334		406
…		…
352	$_[0]{on_eof} = $_[1];	424	$_[0]{on_eof} = $_[1];
353	}	425	}
354		426
355	=item $handle->on_timeout ($cb)	427	=item $handle->on_timeout ($cb)
356		428
357	Replace the current C<on_timeout> callback, or disables the callback	429	Replace the current C<on_timeout> callback, or disables the callback (but
358	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor	430	not the timeout) if C<$cb> = C<undef>. See the C<timeout> constructor
359	argument.	431	argument and method.
360		432
361	=cut	433	=cut
362		434
363	sub on_timeout {	435	sub on_timeout {
364	$_[0]{on_timeout} = $_[1];	436	$_[0]{on_timeout} = $_[1];
365	}	437	}
366		438
367	=item $handle->autocork ($boolean)	439	=item $handle->autocork ($boolean)
368		440
369	Enables or disables the current autocork behaviour (see C<autocork>	441	Enables or disables the current autocork behaviour (see C<autocork>
370	constructor argument).	442	constructor argument). Changes will only take effect on the next write.
371		443
372	=cut	444	=cut
		445
		446	sub autocork {
		447	$_[0]{autocork} = $_[1];
		448	}
373		449
374	=item $handle->no_delay ($boolean)	450	=item $handle->no_delay ($boolean)
375		451
376	Enables or disables the C<no_delay> setting (see constructor argument of	452	Enables or disables the C<no_delay> setting (see constructor argument of
377	the same name for details).	453	the same name for details).
…		…
385	local $SIG{__DIE__};	461	local $SIG{__DIE__};
386	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	462	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];
387	};	463	};
388	}	464	}
389		465
		466	=item $handle->on_starttls ($cb)
		467
		468	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		469
		470	=cut
		471
		472	sub on_starttls {
		473	$_[0]{on_starttls} = $_[1];
		474	}
		475
		476	=item $handle->on_stoptls ($cb)
		477
		478	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		479
		480	=cut
		481
		482	sub on_starttls {
		483	$_[0]{on_stoptls} = $_[1];
		484	}
		485
390	#############################################################################	486	#############################################################################
391		487
392	=item $handle->timeout ($seconds)	488	=item $handle->timeout ($seconds)
393		489
394	Configures (or disables) the inactivity timeout.	490	Configures (or disables) the inactivity timeout.
…		…
418	$self->{_activity} = $NOW;	514	$self->{_activity} = $NOW;
419		515
420	if ($self->{on_timeout}) {	516	if ($self->{on_timeout}) {
421	$self->{on_timeout}($self);	517	$self->{on_timeout}($self);
422	} else {	518	} else {
423	$self->_error (&Errno::ETIMEDOUT);	519	$self->_error (Errno::ETIMEDOUT);
424	}	520	}
425		521
426	# callback could have changed timeout value, optimise	522	# callback could have changed timeout value, optimise
427	return unless $self->{timeout};	523	return unless $self->{timeout};
428		524
…		…
470	my ($self, $cb) = @_;	566	my ($self, $cb) = @_;
471		567
472	$self->{on_drain} = $cb;	568	$self->{on_drain} = $cb;
473		569
474	$cb->($self)	570	$cb->($self)
475	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	571	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
476	}	572	}
477		573
478	=item $handle->push_write ($data)	574	=item $handle->push_write ($data)
479		575
480	Queues the given scalar to be written. You can push as much data as you	576	Queues the given scalar to be written. You can push as much data as you
…		…
491	Scalar::Util::weaken $self;	587	Scalar::Util::weaken $self;
492		588
493	my $cb = sub {	589	my $cb = sub {
494	my $len = syswrite $self->{fh}, $self->{wbuf};	590	my $len = syswrite $self->{fh}, $self->{wbuf};
495		591
496	if ($len >= 0) {	592	if (defined $len) {
497	substr $self->{wbuf}, 0, $len, "";	593	substr $self->{wbuf}, 0, $len, "";
498		594
499	$self->{_activity} = AnyEvent->now;	595	$self->{_activity} = AnyEvent->now;
500		596
501	$self->{on_drain}($self)	597	$self->{on_drain}($self)
502	if $self->{low_water_mark} >= length $self->{wbuf}	598	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
503	&& $self->{on_drain};	599	&& $self->{on_drain};
504		600
505	delete $self->{_ww} unless length $self->{wbuf};	601	delete $self->{_ww} unless length $self->{wbuf};
506	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	602	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
507	$self->_error ($!, 1);	603	$self->_error ($!, 1);
…		…
531		627
532	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	628	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
533	->($self, @_);	629	->($self, @_);
534	}	630	}
535		631
536	if ($self->{filter_w}) {	632	if ($self->{tls}) {
537	$self->{filter_w}($self, \$_[0]);	633	$self->{_tls_wbuf} .= $_[0];
		634
		635	&_dotls ($self);
538	} else {	636	} else {
539	$self->{wbuf} .= $_[0];	637	$self->{wbuf} .= $_[0];
540	$self->_drain_wbuf;	638	$self->_drain_wbuf;
541	}	639	}
542	}	640	}
…		…
559	=cut	657	=cut
560		658
561	register_write_type netstring => sub {	659	register_write_type netstring => sub {
562	my ($self, $string) = @_;	660	my ($self, $string) = @_;
563		661
564	sprintf "%d:%s,", (length $string), $string	662	(length $string) . ":$string,"
565	};	663	};
566		664
567	=item packstring => $format, $data	665	=item packstring => $format, $data
568		666
569	An octet string prefixed with an encoded length. The encoding C<$format>	667	An octet string prefixed with an encoded length. The encoding C<$format>
…		…
634		732
635	pack "w/a*", Storable::nfreeze ($ref)	733	pack "w/a*", Storable::nfreeze ($ref)
636	};	734	};
637		735
638	=back	736	=back
		737
		738	=item $handle->push_shutdown
		739
		740	Sometimes you know you want to close the socket after writing your data
		741	before it was actually written. One way to do that is to replace your
		742	C<on_drain> handler by a callback that shuts down the socket (and set
		743	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		744	replaces the C<on_drain> callback with:
		745
		746	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		747
		748	This simply shuts down the write side and signals an EOF condition to the
		749	the peer.
		750
		751	You can rely on the normal read queue and C<on_eof> handling
		752	afterwards. This is the cleanest way to close a connection.
		753
		754	=cut
		755
		756	sub push_shutdown {
		757	my ($self) = @_;
		758
		759	delete $self->{low_water_mark};
		760	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		761	}
639		762
640	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	763	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
641		764
642	This function (not method) lets you add your own types to C<push_write>.	765	This function (not method) lets you add your own types to C<push_write>.
643	Whenever the given C<type> is used, C<push_write> will invoke the code	766	Whenever the given C<type> is used, C<push_write> will invoke the code
…		…
743		866
744	if (	867	if (
745	defined $self->{rbuf_max}	868	defined $self->{rbuf_max}
746	&& $self->{rbuf_max} < length $self->{rbuf}	869	&& $self->{rbuf_max} < length $self->{rbuf}
747	) {	870	) {
748	$self->_error (&Errno::ENOSPC, 1), return;	871	$self->_error (Errno::ENOSPC, 1), return;
749	}	872	}
750		873
751	while () {	874	while () {
		875	# we need to use a separate tls read buffer, as we must not receive data while
		876	# we are draining the buffer, and this can only happen with TLS.
		877	$self->{rbuf} .= delete $self->{_tls_rbuf} if exists $self->{_tls_rbuf};
		878
752	my $len = length $self->{rbuf};	879	my $len = length $self->{rbuf};
753		880
754	if (my $cb = shift @{ $self->{_queue} }) {	881	if (my $cb = shift @{ $self->{_queue} }) {
755	unless ($cb->($self)) {	882	unless ($cb->($self)) {
756	if ($self->{_eof}) {	883	if ($self->{_eof}) {
757	# no progress can be made (not enough data and no data forthcoming)	884	# no progress can be made (not enough data and no data forthcoming)
758	$self->_error (&Errno::EPIPE, 1), return;	885	$self->_error (Errno::EPIPE, 1), return;
759	}	886	}
760		887
761	unshift @{ $self->{_queue} }, $cb;	888	unshift @{ $self->{_queue} }, $cb;
762	last;	889	last;
763	}	890	}
…		…
771	&& !@{ $self->{_queue} } # and the queue is still empty	898	&& !@{ $self->{_queue} } # and the queue is still empty
772	&& $self->{on_read} # but we still have on_read	899	&& $self->{on_read} # but we still have on_read
773	) {	900	) {
774	# no further data will arrive	901	# no further data will arrive
775	# so no progress can be made	902	# so no progress can be made
776	$self->_error (&Errno::EPIPE, 1), return	903	$self->_error (Errno::EPIPE, 1), return
777	if $self->{_eof};	904	if $self->{_eof};
778		905
779	last; # more data might arrive	906	last; # more data might arrive
780	}	907	}
781	} else {	908	} else {
782	# read side becomes idle	909	# read side becomes idle
783	delete $self->{_rw};	910	delete $self->{_rw} unless $self->{tls};
784	last;	911	last;
785	}	912	}
786	}	913	}
787		914
788	if ($self->{_eof}) {	915	if ($self->{_eof}) {
789	if ($self->{on_eof}) {	916	if ($self->{on_eof}) {
790	$self->{on_eof}($self)	917	$self->{on_eof}($self)
791	} else {	918	} else {
792	$self->_error (0, 1);	919	$self->_error (0, 1, "Unexpected end-of-file");
793	}	920	}
794	}	921	}
795		922
796	# may need to restart read watcher	923	# may need to restart read watcher
797	unless ($self->{_rw}) {	924	unless ($self->{_rw}) {
…		…
817		944
818	=item $handle->rbuf	945	=item $handle->rbuf
819		946
820	Returns the read buffer (as a modifiable lvalue).	947	Returns the read buffer (as a modifiable lvalue).
821		948
822	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	949	You can access the read buffer directly as the C<< ->{rbuf} >>
823	you want.	950	member, if you want. However, the only operation allowed on the
		951	read buffer (apart from looking at it) is removing data from its
		952	beginning. Otherwise modifying or appending to it is not allowed and will
		953	lead to hard-to-track-down bugs.
824		954
825	NOTE: The read buffer should only be used or modified if the C<on_read>,	955	NOTE: The read buffer should only be used or modified if the C<on_read>,
826	C<push_read> or C<unshift_read> methods are used. The other read methods	956	C<push_read> or C<unshift_read> methods are used. The other read methods
827	automatically manage the read buffer.	957	automatically manage the read buffer.
828		958
…		…
1028	return 1;	1158	return 1;
1029	}	1159	}
1030		1160
1031	# reject	1161	# reject
1032	if ($reject && $$rbuf =~ $reject) {	1162	if ($reject && $$rbuf =~ $reject) {
1033	$self->_error (&Errno::EBADMSG);	1163	$self->_error (Errno::EBADMSG);
1034	}	1164	}
1035		1165
1036	# skip	1166	# skip
1037	if ($skip && $$rbuf =~ $skip) {	1167	if ($skip && $$rbuf =~ $skip) {
1038	$data .= substr $$rbuf, 0, $+[0], "";	1168	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1054	my ($self, $cb) = @_;	1184	my ($self, $cb) = @_;
1055		1185
1056	sub {	1186	sub {
1057	unless ($_[0]{rbuf} =~ s/^(0\|[1-9][0-9]*)://) {	1187	unless ($_[0]{rbuf} =~ s/^(0\|[1-9][0-9]*)://) {
1058	if ($_[0]{rbuf} =~ /[^0-9]/) {	1188	if ($_[0]{rbuf} =~ /[^0-9]/) {
1059	$self->_error (&Errno::EBADMSG);	1189	$self->_error (Errno::EBADMSG);
1060	}	1190	}
1061	return;	1191	return;
1062	}	1192	}
1063		1193
1064	my $len = $1;	1194	my $len = $1;
…		…
1067	my $string = $_[1];	1197	my $string = $_[1];
1068	$_[0]->unshift_read (chunk => 1, sub {	1198	$_[0]->unshift_read (chunk => 1, sub {
1069	if ($_[1] eq ",") {	1199	if ($_[1] eq ",") {
1070	$cb->($_[0], $string);	1200	$cb->($_[0], $string);
1071	} else {	1201	} else {
1072	$self->_error (&Errno::EBADMSG);	1202	$self->_error (Errno::EBADMSG);
1073	}	1203	}
1074	});	1204	});
1075	});	1205	});
1076		1206
1077	1	1207	1
…		…
1083	An octet string prefixed with an encoded length. The encoding C<$format>	1213	An octet string prefixed with an encoded length. The encoding C<$format>
1084	uses the same format as a Perl C<pack> format, but must specify a single	1214	uses the same format as a Perl C<pack> format, but must specify a single
1085	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an	1215	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
1086	optional C<!>, C<< < >> or C<< > >> modifier).	1216	optional C<!>, C<< < >> or C<< > >> modifier).
1087		1217
1088	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.	1218	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1219	EPP uses a prefix of C<N> (4 octtes).
1089		1220
1090	Example: read a block of data prefixed by its length in BER-encoded	1221	Example: read a block of data prefixed by its length in BER-encoded
1091	format (very efficient).	1222	format (very efficient).
1092		1223
1093	$handle->push_read (packstring => "w", sub {	1224	$handle->push_read (packstring => "w", sub {
…		…
1123	}	1254	}
1124	};	1255	};
1125		1256
1126	=item json => $cb->($handle, $hash_or_arrayref)	1257	=item json => $cb->($handle, $hash_or_arrayref)
1127		1258
1128	Reads a JSON object or array, decodes it and passes it to the callback.	1259	Reads a JSON object or array, decodes it and passes it to the
		1260	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1129		1261
1130	If a C<json> object was passed to the constructor, then that will be used	1262	If a C<json> object was passed to the constructor, then that will be used
1131	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1263	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1132		1264
1133	This read type uses the incremental parser available with JSON version	1265	This read type uses the incremental parser available with JSON version
…		…
1142	=cut	1274	=cut
1143		1275
1144	register_read_type json => sub {	1276	register_read_type json => sub {
1145	my ($self, $cb) = @_;	1277	my ($self, $cb) = @_;
1146		1278
1147	require JSON;	1279	my $json = $self->{json} \|\|=
		1280	eval { require JSON::XS; JSON::XS->new->utf8 }
		1281	\|\| do { require JSON; JSON->new->utf8 };
1148		1282
1149	my $data;	1283	my $data;
1150	my $rbuf = \$self->{rbuf};	1284	my $rbuf = \$self->{rbuf};
1151		1285
1152	my $json = $self->{json} \|\|= JSON->new->utf8;
1153
1154	sub {	1286	sub {
1155	my $ref = $json->incr_parse ($self->{rbuf});	1287	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1156		1288
1157	if ($ref) {	1289	if ($ref) {
1158	$self->{rbuf} = $json->incr_text;	1290	$self->{rbuf} = $json->incr_text;
1159	$json->incr_text = "";	1291	$json->incr_text = "";
1160	$cb->($self, $ref);	1292	$cb->($self, $ref);
1161		1293
1162	1	1294	1
		1295	} elsif ($@) {
		1296	# error case
		1297	$json->incr_skip;
		1298
		1299	$self->{rbuf} = $json->incr_text;
		1300	$json->incr_text = "";
		1301
		1302	$self->_error (Errno::EBADMSG);
		1303
		1304	()
1163	} else {	1305	} else {
1164	$self->{rbuf} = "";	1306	$self->{rbuf} = "";
		1307
1165	()	1308	()
1166	}	1309	}
1167	}	1310	}
1168	};	1311	};
1169		1312
…		…
1201	# read remaining chunk	1344	# read remaining chunk
1202	$_[0]->unshift_read (chunk => $len, sub {	1345	$_[0]->unshift_read (chunk => $len, sub {
1203	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1346	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1204	$cb->($_[0], $ref);	1347	$cb->($_[0], $ref);
1205	} else {	1348	} else {
1206	$self->_error (&Errno::EBADMSG);	1349	$self->_error (Errno::EBADMSG);
1207	}	1350	}
1208	});	1351	});
1209	}	1352	}
1210		1353
1211	1	1354	1
…		…
1246	Note that AnyEvent::Handle will automatically C<start_read> for you when	1389	Note that AnyEvent::Handle will automatically C<start_read> for you when
1247	you change the C<on_read> callback or push/unshift a read callback, and it	1390	you change the C<on_read> callback or push/unshift a read callback, and it
1248	will automatically C<stop_read> for you when neither C<on_read> is set nor	1391	will automatically C<stop_read> for you when neither C<on_read> is set nor
1249	there are any read requests in the queue.	1392	there are any read requests in the queue.
1250		1393
		1394	These methods will have no effect when in TLS mode (as TLS doesn't support
		1395	half-duplex connections).
		1396
1251	=cut	1397	=cut
1252		1398
1253	sub stop_read {	1399	sub stop_read {
1254	my ($self) = @_;	1400	my ($self) = @_;
1255		1401
1256	delete $self->{_rw};	1402	delete $self->{_rw} unless $self->{tls};
1257	}	1403	}
1258		1404
1259	sub start_read {	1405	sub start_read {
1260	my ($self) = @_;	1406	my ($self) = @_;
1261		1407
1262	unless ($self->{_rw} \|\| $self->{_eof}) {	1408	unless ($self->{_rw} \|\| $self->{_eof}) {
1263	Scalar::Util::weaken $self;	1409	Scalar::Util::weaken $self;
1264		1410
1265	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1411	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {
1266	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1412	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1267	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;	1413	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;
1268		1414
1269	if ($len > 0) {	1415	if ($len > 0) {
1270	$self->{_activity} = AnyEvent->now;	1416	$self->{_activity} = AnyEvent->now;
1271		1417
1272	$self->{filter_r}	1418	if ($self->{tls}) {
1273	? $self->{filter_r}($self, $rbuf)	1419	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1274	: $self->{_in_drain} \|\| $self->_drain_rbuf;	1420
		1421	&_dotls ($self);
		1422	} else {
		1423	$self->_drain_rbuf unless $self->{_in_drain};
		1424	}
1275		1425
1276	} elsif (defined $len) {	1426	} elsif (defined $len) {
1277	delete $self->{_rw};	1427	delete $self->{_rw};
1278	$self->{_eof} = 1;	1428	$self->{_eof} = 1;
1279	$self->_drain_rbuf unless $self->{_in_drain};	1429	$self->_drain_rbuf unless $self->{_in_drain};
…		…
1283	}	1433	}
1284	});	1434	});
1285	}	1435	}
1286	}	1436	}
1287		1437
		1438	our $ERROR_SYSCALL;
		1439	our $ERROR_WANT_READ;
		1440
		1441	sub _tls_error {
		1442	my ($self, $err) = @_;
		1443
		1444	return $self->_error ($!, 1)
		1445	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1446
		1447	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1448
		1449	# reduce error string to look less scary
		1450	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1451
		1452	if ($self->{_on_starttls}) {
		1453	(delete $self->{_on_starttls})->($self, undef, $err);
		1454	&_freetls;
		1455	} else {
		1456	&_freetls;
		1457	$self->_error (Errno::EPROTO, 1, $err);
		1458	}
		1459	}
		1460
		1461	# poll the write BIO and send the data if applicable
		1462	# also decode read data if possible
		1463	# this is basiclaly our TLS state machine
		1464	# more efficient implementations are possible with openssl,
		1465	# but not with the buggy and incomplete Net::SSLeay.
1288	sub _dotls {	1466	sub _dotls {
1289	my ($self) = @_;	1467	my ($self) = @_;
1290		1468
1291	my $buf;	1469	my $tmp;
1292		1470
1293	if (length $self->{_tls_wbuf}) {	1471	if (length $self->{_tls_wbuf}) {
1294	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1472	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1295	substr $self->{_tls_wbuf}, 0, $len, "";	1473	substr $self->{_tls_wbuf}, 0, $tmp, "";
1296	}	1474	}
1297	}
1298		1475
		1476	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1477	return $self->_tls_error ($tmp)
		1478	if $tmp != $ERROR_WANT_READ
		1479	&& ($tmp != $ERROR_SYSCALL \|\| $!);
		1480	}
		1481
		1482	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1483	unless (length $tmp) {
		1484	$self->{_on_starttls}
		1485	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		1486	&_freetls;
		1487
		1488	if ($self->{on_stoptls}) {
		1489	$self->{on_stoptls}($self);
		1490	return;
		1491	} else {
		1492	# let's treat SSL-eof as we treat normal EOF
		1493	delete $self->{_rw};
		1494	$self->{_eof} = 1;
		1495	}
		1496	}
		1497
		1498	$self->{_tls_rbuf} .= $tmp;
		1499	$self->_drain_rbuf unless $self->{_in_drain};
		1500	$self->{tls} or return; # tls session might have gone away in callback
		1501	}
		1502
		1503	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
		1504	return $self->_tls_error ($tmp)
		1505	if $tmp != $ERROR_WANT_READ
		1506	&& ($tmp != $ERROR_SYSCALL \|\| $!);
		1507
1299	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1508	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1300	$self->{wbuf} .= $buf;	1509	$self->{wbuf} .= $tmp;
1301	$self->_drain_wbuf;	1510	$self->_drain_wbuf;
1302	}	1511	}
1303		1512
1304	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	1513	$self->{_on_starttls}
1305	if (length $buf) {	1514	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1306	$self->{rbuf} .= $buf;	1515	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1307	$self->_drain_rbuf unless $self->{_in_drain};
1308	} else {
1309	# let's treat SSL-eof as we treat normal EOF
1310	$self->{_eof} = 1;
1311	$self->_shutdown;
1312	return;
1313	}
1314	}
1315
1316	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
1317
1318	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1319	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1320	return $self->_error ($!, 1);
1321	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
1322	return $self->_error (&Errno::EIO, 1);
1323	}
1324
1325	# all others are fine for our purposes
1326	}
1327	}	1516	}
1328		1517
1329	=item $handle->starttls ($tls[, $tls_ctx])	1518	=item $handle->starttls ($tls[, $tls_ctx])
1330		1519
1331	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1520	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
…		…
1333	C<starttls>.	1522	C<starttls>.
1334		1523
1335	The first argument is the same as the C<tls> constructor argument (either	1524	The first argument is the same as the C<tls> constructor argument (either
1336	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1525	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1337		1526
1338	The second argument is the optional C<Net::SSLeay::CTX> object that is	1527	The second argument is the optional C<AnyEvent::TLS> object that is used
1339	used when AnyEvent::Handle has to create its own TLS connection object.	1528	when AnyEvent::Handle has to create its own TLS connection object, or
		1529	a hash reference with C<< key => value >> pairs that will be used to
		1530	construct a new context.
1340		1531
1341	The TLS connection object will end up in C<< $handle->{tls} >> after this	1532	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1342	call and can be used or changed to your liking. Note that the handshake	1533	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1343	might have already started when this function returns.	1534	changed to your liking. Note that the handshake might have already started
		1535	when this function returns.
1344		1536
		1537	If it an error to start a TLS handshake more than once per
		1538	AnyEvent::Handle object (this is due to bugs in OpenSSL).
		1539
1345	=cut	1540	=cut
		1541
		1542	our %TLS_CACHE; #TODO not yet documented, should we?
1346		1543
1347	sub starttls {	1544	sub starttls {
1348	my ($self, $ssl, $ctx) = @_;	1545	my ($self, $ssl, $ctx) = @_;
1349		1546
1350	$self->stoptls;	1547	require Net::SSLeay;
1351		1548
1352	if ($ssl eq "accept") {	1549	Carp::croak "it is an error to call starttls more than once on an AnyEvent::Handle object"
1353	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());	1550	if $self->{tls};
1354	Net::SSLeay::set_accept_state ($ssl);	1551
1355	} elsif ($ssl eq "connect") {	1552	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
1356	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());	1553	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
1357	Net::SSLeay::set_connect_state ($ssl);	1554
		1555	$ctx \|\|= $self->{tls_ctx};
		1556
		1557	if ("HASH" eq ref $ctx) {
		1558	require AnyEvent::TLS;
		1559
		1560	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context
		1561
		1562	if ($ctx->{cache}) {
		1563	my $key = $ctx+0;
		1564	$ctx = $TLS_CACHE{$key} \|\|= new AnyEvent::TLS %$ctx;
		1565	} else {
		1566	$ctx = new AnyEvent::TLS %$ctx;
		1567	}
		1568	}
1358	}	1569
1359		1570	$self->{tls_ctx} = $ctx \|\| TLS_CTX ();
1360	$self->{tls} = $ssl;	1571	$self->{tls} = $ssl = $self->{tls_ctx}->_get_session ($ssl, $self, $self->{peername});
1361		1572
1362	# basically, this is deep magic (because SSL_read should have the same issues)	1573	# basically, this is deep magic (because SSL_read should have the same issues)
1363	# but the openssl maintainers basically said: "trust us, it just works".	1574	# but the openssl maintainers basically said: "trust us, it just works".
1364	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1575	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1365	# and mismaintained ssleay-module doesn't even offer them).	1576	# and mismaintained ssleay-module doesn't even offer them).
1366	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1577	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1578	#
		1579	# in short: this is a mess.
		1580	#
		1581	# note that we do not try to keep the length constant between writes as we are required to do.
		1582	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1583	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1584	# have identity issues in that area.
1367	Net::SSLeay::CTX_set_mode ($self->{tls},	1585	# Net::SSLeay::CTX_set_mode ($ssl,
1368	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)	1586	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)
1369	\| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));	1587	# \| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));
		1588	Net::SSLeay::CTX_set_mode ($ssl, 1\|2);
1370		1589
1371	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1590	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1372	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1591	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1373		1592
1374	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1593	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});
1375		1594
1376	$self->{filter_w} = sub {	1595	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1377	$_[0]{_tls_wbuf} .= ${$_[1]};	1596	if $self->{on_starttls};
1378	&_dotls;	1597
1379	};	1598	&_dotls; # need to trigger the initial handshake
1380	$self->{filter_r} = sub {	1599	$self->start_read; # make sure we actually do read
1381	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1382	&_dotls;
1383	};
1384	}	1600	}
1385		1601
1386	=item $handle->stoptls	1602	=item $handle->stoptls
1387		1603
1388	Destroys the SSL connection, if any. Partial read or write data will be	1604	Shuts down the SSL connection - this makes a proper EOF handshake by
1389	lost.	1605	sending a close notify to the other side, but since OpenSSL doesn't
		1606	support non-blocking shut downs, it is not possible to re-use the stream
		1607	afterwards.
1390		1608
1391	=cut	1609	=cut
1392		1610
1393	sub stoptls {	1611	sub stoptls {
1394	my ($self) = @_;	1612	my ($self) = @_;
1395		1613
1396	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1614	if ($self->{tls}) {
		1615	Net::SSLeay::shutdown ($self->{tls});
1397		1616
1398	delete $self->{_rbio};	1617	&_dotls;
1399	delete $self->{_wbio};	1618
1400	delete $self->{_tls_wbuf};	1619	# # we don't give a shit. no, we do, but we can't. no...#d#
1401	delete $self->{filter_r};	1620	# # we, we... have to use openssl :/#d#
1402	delete $self->{filter_w};	1621	# &_freetls;#d#
		1622	}
		1623	}
		1624
		1625	sub _freetls {
		1626	my ($self) = @_;
		1627
		1628	return unless $self->{tls};
		1629
		1630	$self->{tls_ctx}->_put_session (delete $self->{tls});
		1631
		1632	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1403	}	1633	}
1404		1634
1405	sub DESTROY {	1635	sub DESTROY {
1406	my $self = shift;	1636	my ($self) = @_;
1407		1637
1408	$self->stoptls;	1638	&_freetls;
1409		1639
1410	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	1640	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1411		1641
1412	if ($linger && length $self->{wbuf}) {	1642	if ($linger && length $self->{wbuf}) {
1413	my $fh = delete $self->{fh};	1643	my $fh = delete $self->{fh};
…		…
1428	@linger = ();	1658	@linger = ();
1429	});	1659	});
1430	}	1660	}
1431	}	1661	}
1432		1662
		1663	=item $handle->destroy
		1664
		1665	Shuts down the handle object as much as possible - this call ensures that
		1666	no further callbacks will be invoked and as many resources as possible
		1667	will be freed. You must not call any methods on the object afterwards.
		1668
		1669	Normally, you can just "forget" any references to an AnyEvent::Handle
		1670	object and it will simply shut down. This works in fatal error and EOF
		1671	callbacks, as well as code outside. It does I<NOT> work in a read or write
		1672	callback, so when you want to destroy the AnyEvent::Handle object from
		1673	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		1674	that case.
		1675
		1676	Destroying the handle object in this way has the advantage that callbacks
		1677	will be removed as well, so if those are the only reference holders (as
		1678	is common), then one doesn't need to do anything special to break any
		1679	reference cycles.
		1680
		1681	The handle might still linger in the background and write out remaining
		1682	data, as specified by the C<linger> option, however.
		1683
		1684	=cut
		1685
		1686	sub destroy {
		1687	my ($self) = @_;
		1688
		1689	$self->DESTROY;
		1690	%$self = ();
		1691	}
		1692
1433	=item AnyEvent::Handle::TLS_CTX	1693	=item AnyEvent::Handle::TLS_CTX
1434		1694
1435	This function creates and returns the Net::SSLeay::CTX object used by	1695	This function creates and returns the AnyEvent::TLS object used by default
1436	default for TLS mode.	1696	for TLS mode.
1437		1697
1438	The context is created like this:	1698	The context is created by calling L<AnyEvent::TLS> without any arguments.
1439
1440	Net::SSLeay::load_error_strings;
1441	Net::SSLeay::SSLeay_add_ssl_algorithms;
1442	Net::SSLeay::randomize;
1443
1444	my $CTX = Net::SSLeay::CTX_new;
1445
1446	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1447		1699
1448	=cut	1700	=cut
1449		1701
1450	our $TLS_CTX;	1702	our $TLS_CTX;
1451		1703
1452	sub TLS_CTX() {	1704	sub TLS_CTX() {
1453	$TLS_CTX \|\| do {	1705	$TLS_CTX \|\|= do {
1454	require Net::SSLeay;	1706	require AnyEvent::TLS;
1455		1707
1456	Net::SSLeay::load_error_strings ();	1708	new AnyEvent::TLS
1457	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1458	Net::SSLeay::randomize ();
1459
1460	$TLS_CTX = Net::SSLeay::CTX_new ();
1461
1462	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1463
1464	$TLS_CTX
1465	}	1709	}
1466	}	1710	}
1467		1711
1468	=back	1712	=back
		1713
		1714
		1715	=head1 NONFREQUENTLY ASKED QUESTIONS
		1716
		1717	=over 4
		1718
		1719	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		1720	still get further invocations!
		1721
		1722	That's because AnyEvent::Handle keeps a reference to itself when handling
		1723	read or write callbacks.
		1724
		1725	It is only safe to "forget" the reference inside EOF or error callbacks,
		1726	from within all other callbacks, you need to explicitly call the C<<
		1727	->destroy >> method.
		1728
		1729	=item I get different callback invocations in TLS mode/Why can't I pause
		1730	reading?
		1731
		1732	Unlike, say, TCP, TLS connections do not consist of two independent
		1733	communication channels, one for each direction. Or put differently. The
		1734	read and write directions are not independent of each other: you cannot
		1735	write data unless you are also prepared to read, and vice versa.
		1736
		1737	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		1738	callback invocations when you are not expecting any read data - the reason
		1739	is that AnyEvent::Handle always reads in TLS mode.
		1740
		1741	During the connection, you have to make sure that you always have a
		1742	non-empty read-queue, or an C<on_read> watcher. At the end of the
		1743	connection (or when you no longer want to use it) you can call the
		1744	C<destroy> method.
		1745
		1746	=item How do I read data until the other side closes the connection?
		1747
		1748	If you just want to read your data into a perl scalar, the easiest way
		1749	to achieve this is by setting an C<on_read> callback that does nothing,
		1750	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		1751	will be in C<$_[0]{rbuf}>:
		1752
		1753	$handle->on_read (sub { });
		1754	$handle->on_eof (undef);
		1755	$handle->on_error (sub {
		1756	my $data = delete $_[0]{rbuf};
		1757	});
		1758
		1759	The reason to use C<on_error> is that TCP connections, due to latencies
		1760	and packets loss, might get closed quite violently with an error, when in
		1761	fact, all data has been received.
		1762
		1763	It is usually better to use acknowledgements when transferring data,
		1764	to make sure the other side hasn't just died and you got the data
		1765	intact. This is also one reason why so many internet protocols have an
		1766	explicit QUIT command.
		1767
		1768	=item I don't want to destroy the handle too early - how do I wait until
		1769	all data has been written?
		1770
		1771	After writing your last bits of data, set the C<on_drain> callback
		1772	and destroy the handle in there - with the default setting of
		1773	C<low_water_mark> this will be called precisely when all data has been
		1774	written to the socket:
		1775
		1776	$handle->push_write (...);
		1777	$handle->on_drain (sub {
		1778	warn "all data submitted to the kernel\n";
		1779	undef $handle;
		1780	});
		1781
		1782	If you just want to queue some data and then signal EOF to the other side,
		1783	consider using C<< ->push_shutdown >> instead.
		1784
		1785	=item I want to contact a TLS/SSL server, I don't care about security.
		1786
		1787	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		1788	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		1789	parameter:
		1790
		1791	tcp_connect $host, $port, sub {
		1792	my ($fh) = @_;
		1793
		1794	my $handle = new AnyEvent::Handle
		1795	fh => $fh,
		1796	tls => "connect",
		1797	on_error => sub { ... };
		1798
		1799	$handle->push_write (...);
		1800	};
		1801
		1802	=item I want to contact a TLS/SSL server, I do care about security.
		1803
		1804	Then you should additionally enable certificate verification, including
		1805	peername verification, if the protocol you use supports it (see
		1806	L<AnyEvent::TLS>, C<verify_peername>).
		1807
		1808	E.g. for HTTPS:
		1809
		1810	tcp_connect $host, $port, sub {
		1811	my ($fh) = @_;
		1812
		1813	my $handle = new AnyEvent::Handle
		1814	fh => $fh,
		1815	peername => $host,
		1816	tls => "connect",
		1817	tls_ctx => { verify => 1, verify_peername => "https" },
		1818	...
		1819
		1820	Note that you must specify the hostname you connected to (or whatever
		1821	"peername" the protocol needs) as the C<peername> argument, otherwise no
		1822	peername verification will be done.
		1823
		1824	The above will use the system-dependent default set of trusted CA
		1825	certificates. If you want to check against a specific CA, add the
		1826	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		1827
		1828	tls_ctx => {
		1829	verify => 1,
		1830	verify_peername => "https",
		1831	ca_file => "my-ca-cert.pem",
		1832	},
		1833
		1834	=item I want to create a TLS/SSL server, how do I do that?
		1835
		1836	Well, you first need to get a server certificate and key. You have
		1837	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		1838	self-signed certificate (cheap. check the search engine of your choice,
		1839	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		1840	nice program for that purpose).
		1841
		1842	Then create a file with your private key (in PEM format, see
		1843	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		1844	file should then look like this:
		1845
		1846	-----BEGIN RSA PRIVATE KEY-----
		1847	...header data
		1848	... lots of base64'y-stuff
		1849	-----END RSA PRIVATE KEY-----
		1850
		1851	-----BEGIN CERTIFICATE-----
		1852	... lots of base64'y-stuff
		1853	-----END CERTIFICATE-----
		1854
		1855	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		1856	specify this file as C<cert_file>:
		1857
		1858	tcp_server undef, $port, sub {
		1859	my ($fh) = @_;
		1860
		1861	my $handle = new AnyEvent::Handle
		1862	fh => $fh,
		1863	tls => "accept",
		1864	tls_ctx => { cert_file => "my-server-keycert.pem" },
		1865	...
		1866
		1867	When you have intermediate CA certificates that your clients might not
		1868	know about, just append them to the C<cert_file>.
		1869
		1870	=back
		1871
1469		1872
1470	=head1 SUBCLASSING AnyEvent::Handle	1873	=head1 SUBCLASSING AnyEvent::Handle
1471		1874
1472	In many cases, you might want to subclass AnyEvent::Handle.	1875	In many cases, you might want to subclass AnyEvent::Handle.
1473		1876

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents): Revision 1.83 by root, Thu Aug 21 19:11:37 2008 UTC vs. Revision 1.155 by root, Mon Jul 20 22:39:57 2009 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.83 by root, Thu Aug 21 19:11:37 2008 UTC vs.
Revision 1.155 by root, Mon Jul 20 22:39:57 2009 UTC