ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.83 by root, Thu Aug 21 19:11:37 2008 UTC vs.
Revision 1.203 by root, Sat Oct 16 03:22:10 2010 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict qw(subs vars);
5
6	use AnyEvent ();
7	use AnyEvent::Util qw(WSAEWOULDBLOCK);
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw(EAGAIN EINTR);
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on streaming handles via AnyEvent
16
17	=cut
18
19	our $VERSION = 4.232;
20		4
21	=head1 SYNOPSIS	5	=head1 SYNOPSIS
22		6
23	use AnyEvent;	7	use AnyEvent;
24	use AnyEvent::Handle;	8	use AnyEvent::Handle;
25		9
26	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
27		11
28	my $handle =	12	my $hdl; $hdl = new AnyEvent::Handle
29	AnyEvent::Handle->new (
30	fh => \*STDIN,	13	fh => \*STDIN,
31	on_eof => sub {	14	on_error => sub {
32	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
33	},	16	warn "got error $msg\n";
		17	$hdl->destroy;
		18	$cv->send;
34	);	19	};
35		20
36	# send some request line	21	# send some request line
37	$handle->push_write ("getinfo\015\012");	22	$hdl->push_write ("getinfo\015\012");
38		23
39	# read the response line	24	# read the response line
40	$handle->push_read (line => sub {	25	$hdl->push_read (line => sub {
41	my ($handle, $line) = @_;	26	my ($hdl, $line) = @_;
42	warn "read line <$line>\n";	27	warn "got line <$line>\n";
43	$cv->send;	28	$cv->send;
44	});	29	});
45		30
46	$cv->recv;	31	$cv->recv;
47		32
48	=head1 DESCRIPTION	33	=head1 DESCRIPTION
49		34
50	This module is a helper module to make it easier to do event-based I/O on	35	This is a helper module to make it easier to do event-based I/O on
51	filehandles. For utility functions for doing non-blocking connects and accepts	36	stream-based filehandles (sockets, pipes, and other stream things).
52	on sockets see L<AnyEvent::Util>.
53		37
		38	The L<AnyEvent::Intro> tutorial contains some well-documented
		39	AnyEvent::Handle examples.
		40
54	In the following, when the documentation refers to of "bytes" then this	41	In the following, where the documentation refers to "bytes", it means
55	means characters. As sysread and syswrite are used for all I/O, their	42	characters. As sysread and syswrite are used for all I/O, their
56	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
57		47
58	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
59	argument.	49	argument.
60		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
		65	sub _load_func($) {
		66	my $func = $_[0];
		67
		68	unless (defined &$func) {
		69	my $pkg = $func;
		70	do {
		71	$pkg =~ s/::[^:]+$//
		72	or return;
		73	eval "require $pkg";
		74	} until defined &$func;
		75	}
		76
		77	\&$func
		78	}
		79
		80	sub MAX_READ_SIZE() { 131072 }
		81
61	=head1 METHODS	82	=head1 METHODS
62		83
63	=over 4	84	=over 4
64		85
65	=item B<new (%args)>	86	=item $handle = B<new> AnyEvent::Handle fh => $filehandle, key => value...
66		87
67	The constructor supports these arguments (all as key => value pairs).	88	The constructor supports these arguments (all as C<< key => value >> pairs).
68		89
69	=over 4	90	=over 4
70		91
71	=item fh => $filehandle [MANDATORY]	92	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
72		93
73	The filehandle this L<AnyEvent::Handle> object will operate on.	94	The filehandle this L<AnyEvent::Handle> object will operate on.
74
75	NOTE: The filehandle will be set to non-blocking mode (using	95	NOTE: The filehandle will be set to non-blocking mode (using
76	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in	96	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
77	that mode.	97	that mode.
78		98
		99	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
		100
		101	Try to connect to the specified host and service (port), using
		102	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		103	default C<peername>.
		104
		105	You have to specify either this parameter, or C<fh>, above.
		106
		107	It is possible to push requests on the read and write queues, and modify
		108	properties of the stream, even while AnyEvent::Handle is connecting.
		109
		110	When this parameter is specified, then the C<on_prepare>,
		111	C<on_connect_error> and C<on_connect> callbacks will be called under the
		112	appropriate circumstances:
		113
		114	=over 4
		115
79	=item on_eof => $cb->($handle)	116	=item on_prepare => $cb->($handle)
80		117
81	Set the callback to be called when an end-of-file condition is detected,	118	This (rarely used) callback is called before a new connection is
82	i.e. in the case of a socket, when the other side has closed the	119	attempted, but after the file handle has been created. It could be used to
83	connection cleanly.	120	prepare the file handle with parameters required for the actual connect
		121	(as opposed to settings that can be changed when the connection is already
		122	established).
84		123
85	For sockets, this just means that the other side has stopped sending data,	124	The return value of this callback should be the connect timeout value in
86	you can still try to write data, and, in fact, one can return from the eof	125	seconds (or C<0>, or C<undef>, or the empty list, to indicate that the
87	callback and continue writing data, as only the read part has been shut	126	default timeout is to be used).
88	down.
89		127
90	While not mandatory, it is I<highly> recommended to set an eof callback,	128	=item on_connect => $cb->($handle, $host, $port, $retry->())
91	otherwise you might end up with a closed socket while you are still
92	waiting for data.
93		129
94	If an EOF condition has been detected but no C<on_eof> callback has been	130	This callback is called when a connection has been successfully established.
95	set, then a fatal error will be raised with C<$!> set to <0>.
96		131
		132	The peer's numeric host and port (the socket peername) are passed as
		133	parameters, together with a retry callback.
		134
		135	If, for some reason, the handle is not acceptable, calling C<$retry>
		136	will continue with the next connection target (in case of multi-homed
		137	hosts or SRV records there can be multiple connection endpoints). At the
		138	time it is called the read and write queues, eof status, tls status and
		139	similar properties of the handle will have been reset.
		140
		141	In most cases, you should ignore the C<$retry> parameter.
		142
		143	=item on_connect_error => $cb->($handle, $message)
		144
		145	This callback is called when the connection could not be
		146	established. C<$!> will contain the relevant error code, and C<$message> a
		147	message describing it (usually the same as C<"$!">).
		148
		149	If this callback isn't specified, then C<on_error> will be called with a
		150	fatal error instead.
		151
		152	=back
		153
97	=item on_error => $cb->($handle, $fatal)	154	=item on_error => $cb->($handle, $fatal, $message)
98		155
99	This is the error callback, which is called when, well, some error	156	This is the error callback, which is called when, well, some error
100	occured, such as not being able to resolve the hostname, failure to	157	occured, such as not being able to resolve the hostname, failure to
101	connect or a read error.	158	connect, or a read error.
102		159
103	Some errors are fatal (which is indicated by C<$fatal> being true). On	160	Some errors are fatal (which is indicated by C<$fatal> being true). On
104	fatal errors the handle object will be shut down and will not be usable	161	fatal errors the handle object will be destroyed (by a call to C<< ->
105	(but you are free to look at the current C< ->rbuf >). Examples of fatal	162	destroy >>) after invoking the error callback (which means you are free to
106	errors are an EOF condition with active (but unsatisifable) read watchers	163	examine the handle object). Examples of fatal errors are an EOF condition
107	(C<EPIPE>) or I/O errors.	164	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		165	cases where the other side can close the connection at will, it is
		166	often easiest to not report C<EPIPE> errors in this callback.
108		167
		168	AnyEvent::Handle tries to find an appropriate error code for you to check
		169	against, but in some cases (TLS errors), this does not work well. It is
		170	recommended to always output the C<$message> argument in human-readable
		171	error messages (it's usually the same as C<"$!">).
		172
109	Non-fatal errors can be retried by simply returning, but it is recommended	173	Non-fatal errors can be retried by returning, but it is recommended
110	to simply ignore this parameter and instead abondon the handle object	174	to simply ignore this parameter and instead abondon the handle object
111	when this callback is invoked. Examples of non-fatal errors are timeouts	175	when this callback is invoked. Examples of non-fatal errors are timeouts
112	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).	176	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
113		177
114	On callback entrance, the value of C<$!> contains the operating system	178	On entry to the callback, the value of C<$!> contains the operating
115	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	179	system error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		180	C<EPROTO>).
116		181
117	While not mandatory, it is I<highly> recommended to set this callback, as	182	While not mandatory, it is I<highly> recommended to set this callback, as
118	you will not be notified of errors otherwise. The default simply calls	183	you will not be notified of errors otherwise. The default just calls
119	C<croak>.	184	C<croak>.
120		185
121	=item on_read => $cb->($handle)	186	=item on_read => $cb->($handle)
122		187
123	This sets the default read callback, which is called when data arrives	188	This sets the default read callback, which is called when data arrives
124	and no read request is in the queue (unlike read queue callbacks, this	189	and no read request is in the queue (unlike read queue callbacks, this
125	callback will only be called when at least one octet of data is in the	190	callback will only be called when at least one octet of data is in the
126	read buffer).	191	read buffer).
127		192
128	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	193	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
129	method or access the C<$handle->{rbuf}> member directly.	194	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		195	must not enlarge or modify the read buffer, you can only remove data at
		196	the beginning from it.
130		197
		198	You can also call C<< ->push_read (...) >> or any other function that
		199	modifies the read queue. Or do both. Or ...
		200
131	When an EOF condition is detected then AnyEvent::Handle will first try to	201	When an EOF condition is detected, AnyEvent::Handle will first try to
132	feed all the remaining data to the queued callbacks and C<on_read> before	202	feed all the remaining data to the queued callbacks and C<on_read> before
133	calling the C<on_eof> callback. If no progress can be made, then a fatal	203	calling the C<on_eof> callback. If no progress can be made, then a fatal
134	error will be raised (with C<$!> set to C<EPIPE>).	204	error will be raised (with C<$!> set to C<EPIPE>).
135		205
		206	Note that, unlike requests in the read queue, an C<on_read> callback
		207	doesn't mean you I<require> some data: if there is an EOF and there
		208	are outstanding read requests then an error will be flagged. With an
		209	C<on_read> callback, the C<on_eof> callback will be invoked.
		210
		211	=item on_eof => $cb->($handle)
		212
		213	Set the callback to be called when an end-of-file condition is detected,
		214	i.e. in the case of a socket, when the other side has closed the
		215	connection cleanly, and there are no outstanding read requests in the
		216	queue (if there are read requests, then an EOF counts as an unexpected
		217	connection close and will be flagged as an error).
		218
		219	For sockets, this just means that the other side has stopped sending data,
		220	you can still try to write data, and, in fact, one can return from the EOF
		221	callback and continue writing data, as only the read part has been shut
		222	down.
		223
		224	If an EOF condition has been detected but no C<on_eof> callback has been
		225	set, then a fatal error will be raised with C<$!> set to <0>.
		226
136	=item on_drain => $cb->($handle)	227	=item on_drain => $cb->($handle)
137		228
138	This sets the callback that is called when the write buffer becomes empty	229	This sets the callback that is called when the write buffer becomes empty
139	(or when the callback is set and the buffer is empty already).	230	(or immediately if the buffer is empty already).
140		231
141	To append to the write buffer, use the C<< ->push_write >> method.	232	To append to the write buffer, use the C<< ->push_write >> method.
142		233
143	This callback is useful when you don't want to put all of your write data	234	This callback is useful when you don't want to put all of your write data
144	into the queue at once, for example, when you want to write the contents	235	into the queue at once, for example, when you want to write the contents
…		…
146	memory and push it into the queue, but instead only read more data from	237	memory and push it into the queue, but instead only read more data from
147	the file when the write queue becomes empty.	238	the file when the write queue becomes empty.
148		239
149	=item timeout => $fractional_seconds	240	=item timeout => $fractional_seconds
150		241
		242	=item rtimeout => $fractional_seconds
		243
		244	=item wtimeout => $fractional_seconds
		245
151	If non-zero, then this enables an "inactivity" timeout: whenever this many	246	If non-zero, then these enables an "inactivity" timeout: whenever this
152	seconds pass without a successful read or write on the underlying file	247	many seconds pass without a successful read or write on the underlying
153	handle, the C<on_timeout> callback will be invoked (and if that one is	248	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
154	missing, an C<ETIMEDOUT> error will be raised).	249	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		250	error will be raised).
155		251
		252	There are three variants of the timeouts that work independently
		253	of each other, for both read and write, just read, and just write:
		254	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		255	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		256	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
		257
156	Note that timeout processing is also active when you currently do not have	258	Note that timeout processing is active even when you do not have
157	any outstanding read or write requests: If you plan to keep the connection	259	any outstanding read or write requests: If you plan to keep the connection
158	idle then you should disable the timout temporarily or ignore the timeout	260	idle then you should disable the timeout temporarily or ignore the timeout
159	in the C<on_timeout> callback.	261	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		262	restart the timeout.
160		263
161	Zero (the default) disables this timeout.	264	Zero (the default) disables this timeout.
162		265
163	=item on_timeout => $cb->($handle)	266	=item on_timeout => $cb->($handle)
164		267
…		…
168		271
169	=item rbuf_max => <bytes>	272	=item rbuf_max => <bytes>
170		273
171	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	274	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
172	when the read buffer ever (strictly) exceeds this size. This is useful to	275	when the read buffer ever (strictly) exceeds this size. This is useful to
173	avoid denial-of-service attacks.	276	avoid some forms of denial-of-service attacks.
174		277
175	For example, a server accepting connections from untrusted sources should	278	For example, a server accepting connections from untrusted sources should
176	be configured to accept only so-and-so much data that it cannot act on	279	be configured to accept only so-and-so much data that it cannot act on
177	(for example, when expecting a line, an attacker could send an unlimited	280	(for example, when expecting a line, an attacker could send an unlimited
178	amount of data without a callback ever being called as long as the line	281	amount of data without a callback ever being called as long as the line
179	isn't finished).	282	isn't finished).
180		283
181	=item autocork => <boolean>	284	=item autocork => <boolean>
182		285
183	When disabled (the default), then C<push_write> will try to immediately	286	When disabled (the default), C<push_write> will try to immediately
184	write the data to the handle if possible. This avoids having to register	287	write the data to the handle if possible. This avoids having to register
185	a write watcher and wait for the next event loop iteration, but can be	288	a write watcher and wait for the next event loop iteration, but can
186	inefficient if you write multiple small chunks (this disadvantage is	289	be inefficient if you write multiple small chunks (on the wire, this
187	usually avoided by your kernel's nagle algorithm, see C<low_delay>).	290	disadvantage is usually avoided by your kernel's nagle algorithm, see
		291	C<no_delay>, but this option can save costly syscalls).
188		292
189	When enabled, then writes will always be queued till the next event loop	293	When enabled, writes will always be queued till the next event loop
190	iteration. This is efficient when you do many small writes per iteration,	294	iteration. This is efficient when you do many small writes per iteration,
191	but less efficient when you do a single write only.	295	but less efficient when you do a single write only per iteration (or when
		296	the write buffer often is full). It also increases write latency.
192		297
193	=item no_delay => <boolean>	298	=item no_delay => <boolean>
194		299
195	When doing small writes on sockets, your operating system kernel might	300	When doing small writes on sockets, your operating system kernel might
196	wait a bit for more data before actually sending it out. This is called	301	wait a bit for more data before actually sending it out. This is called
197	the Nagle algorithm, and usually it is beneficial.	302	the Nagle algorithm, and usually it is beneficial.
198		303
199	In some situations you want as low a delay as possible, which cna be	304	In some situations you want as low a delay as possible, which can be
200	accomplishd by setting this option to true.	305	accomplishd by setting this option to a true value.
201		306
202	The default is your opertaing system's default behaviour, this option	307	The default is your operating system's default behaviour (most likely
203	explicitly enables or disables it, if possible.	308	enabled). This option explicitly enables or disables it, if possible.
		309
		310	=item keepalive => <boolean>
		311
		312	Enables (default disable) the SO_KEEPALIVE option on the stream socket:
		313	normally, TCP connections have no time-out once established, so TCP
		314	connections, once established, can stay alive forever even when the other
		315	side has long gone. TCP keepalives are a cheap way to take down long-lived
		316	TCP connections when the other side becomes unreachable. While the default
		317	is OS-dependent, TCP keepalives usually kick in after around two hours,
		318	and, if the other side doesn't reply, take down the TCP connection some 10
		319	to 15 minutes later.
		320
		321	It is harmless to specify this option for file handles that do not support
		322	keepalives, and enabling it on connections that are potentially long-lived
		323	is usually a good idea.
		324
		325	=item oobinline => <boolean>
		326
		327	BSD majorly fucked up the implementation of TCP urgent data. The result
		328	is that almost no OS implements TCP according to the specs, and every OS
		329	implements it slightly differently.
		330
		331	If you want to handle TCP urgent data, then setting this flag (the default
		332	is enabled) gives you the most portable way of getting urgent data, by
		333	putting it into the stream.
		334
		335	Since BSD emulation of OOB data on top of TCP's urgent data can have
		336	security implications, AnyEvent::Handle sets this flag automatically
		337	unless explicitly specified. Note that setting this flag after
		338	establishing a connection I<may> be a bit too late (data loss could
		339	already have occured on BSD systems), but at least it will protect you
		340	from most attacks.
204		341
205	=item read_size => <bytes>	342	=item read_size => <bytes>
206		343
207	The default read block size (the amount of bytes this module will try to read	344	The initial read block size, the number of bytes this module will try to
208	during each (loop iteration). Default: C<8192>.	345	read during each loop iteration. Each handle object will consume at least
		346	this amount of memory for the read buffer as well, so when handling many
		347	connections requirements). See also C<max_read_size>. Default: C<2048>.
		348
		349	=item max_read_size => <bytes>
		350
		351	The maximum read buffer size used by the dynamic adjustment
		352	algorithm: Each time AnyEvent::Handle can read C<read_size> bytes in
		353	one go it will double C<read_size> up to the maximum given by this
		354	option. Default: C<131072> or C<read_size>, whichever is higher.
209		355
210	=item low_water_mark => <bytes>	356	=item low_water_mark => <bytes>
211		357
212	Sets the amount of bytes (default: C<0>) that make up an "empty" write	358	Sets the number of bytes (default: C<0>) that make up an "empty" write
213	buffer: If the write reaches this size or gets even samller it is	359	buffer: If the buffer reaches this size or gets even samller it is
214	considered empty.	360	considered empty.
215		361
		362	Sometimes it can be beneficial (for performance reasons) to add data to
		363	the write buffer before it is fully drained, but this is a rare case, as
		364	the operating system kernel usually buffers data as well, so the default
		365	is good in almost all cases.
		366
216	=item linger => <seconds>	367	=item linger => <seconds>
217		368
218	If non-zero (default: C<3600>), then the destructor of the	369	If this is non-zero (default: C<3600>), the destructor of the
219	AnyEvent::Handle object will check wether there is still outstanding write	370	AnyEvent::Handle object will check whether there is still outstanding
220	data and will install a watcher that will write out this data. No errors	371	write data and will install a watcher that will write this data to the
221	will be reported (this mostly matches how the operating system treats	372	socket. No errors will be reported (this mostly matches how the operating
222	outstanding data at socket close time).	373	system treats outstanding data at socket close time).
223		374
224	This will not work for partial TLS data that could not yet been	375	This will not work for partial TLS data that could not be encoded
225	encoded. This data will be lost.	376	yet. This data will be lost. Calling the C<stoptls> method in time might
		377	help.
		378
		379	=item peername => $string
		380
		381	A string used to identify the remote site - usually the DNS hostname
		382	(I<not> IDN!) used to create the connection, rarely the IP address.
		383
		384	Apart from being useful in error messages, this string is also used in TLS
		385	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		386	verification will be skipped when C<peername> is not specified or is
		387	C<undef>.
226		388
227	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	389	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
228		390
229	When this parameter is given, it enables TLS (SSL) mode, that means it	391	When this parameter is given, it enables TLS (SSL) mode, that means
230	will start making tls handshake and will transparently encrypt/decrypt	392	AnyEvent will start a TLS handshake as soon as the connection has been
231	data.	393	established and will transparently encrypt/decrypt data afterwards.
		394
		395	All TLS protocol errors will be signalled as C<EPROTO>, with an
		396	appropriate error message.
232		397
233	TLS mode requires Net::SSLeay to be installed (it will be loaded	398	TLS mode requires Net::SSLeay to be installed (it will be loaded
234	automatically when you try to create a TLS handle).	399	automatically when you try to create a TLS handle): this module doesn't
		400	have a dependency on that module, so if your module requires it, you have
		401	to add the dependency yourself.
235		402
236	For the TLS server side, use C<accept>, and for the TLS client side of a	403	Unlike TCP, TLS has a server and client side: for the TLS server side, use
237	connection, use C<connect> mode.	404	C<accept>, and for the TLS client side of a connection, use C<connect>
		405	mode.
238		406
239	You can also provide your own TLS connection object, but you have	407	You can also provide your own TLS connection object, but you have
240	to make sure that you call either C<Net::SSLeay::set_connect_state>	408	to make sure that you call either C<Net::SSLeay::set_connect_state>
241	or C<Net::SSLeay::set_accept_state> on it before you pass it to	409	or C<Net::SSLeay::set_accept_state> on it before you pass it to
242	AnyEvent::Handle.	410	AnyEvent::Handle. Also, this module will take ownership of this connection
		411	object.
243		412
		413	At some future point, AnyEvent::Handle might switch to another TLS
		414	implementation, then the option to use your own session object will go
		415	away.
		416
		417	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		418	passing in the wrong integer will lead to certain crash. This most often
		419	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		420	segmentation fault.
		421
244	See the C<starttls> method if you need to start TLS negotiation later.	422	Use the C<< ->starttls >> method if you need to start TLS negotiation later.
245		423
246	=item tls_ctx => $ssl_ctx	424	=item tls_ctx => $anyevent_tls
247		425
248	Use the given Net::SSLeay::CTX object to create the new TLS connection	426	Use the given C<AnyEvent::TLS> object to create the new TLS connection
249	(unless a connection object was specified directly). If this parameter is	427	(unless a connection object was specified directly). If this parameter is
250	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	428	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
251		429
		430	Instead of an object, you can also specify a hash reference with C<< key
		431	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		432	new TLS context object.
		433
		434	=item on_starttls => $cb->($handle, $success[, $error_message])
		435
		436	This callback will be invoked when the TLS/SSL handshake has finished. If
		437	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		438	(C<on_stoptls> will not be called in this case).
		439
		440	The session in C<< $handle->{tls} >> can still be examined in this
		441	callback, even when the handshake was not successful.
		442
		443	TLS handshake failures will not cause C<on_error> to be invoked when this
		444	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		445
		446	Without this callback, handshake failures lead to C<on_error> being
		447	called as usual.
		448
		449	Note that you cannot just call C<starttls> again in this callback. If you
		450	need to do that, start an zero-second timer instead whose callback can
		451	then call C<< ->starttls >> again.
		452
		453	=item on_stoptls => $cb->($handle)
		454
		455	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		456	set, then it will be invoked after freeing the TLS session. If it is not,
		457	then a TLS shutdown condition will be treated like a normal EOF condition
		458	on the handle.
		459
		460	The session in C<< $handle->{tls} >> can still be examined in this
		461	callback.
		462
		463	This callback will only be called on TLS shutdowns, not when the
		464	underlying handle signals EOF.
		465
252	=item json => JSON or JSON::XS object	466	=item json => JSON or JSON::XS object
253		467
254	This is the json coder object used by the C<json> read and write types.	468	This is the json coder object used by the C<json> read and write types.
255		469
256	If you don't supply it, then AnyEvent::Handle will create and use a	470	If you don't supply it, then AnyEvent::Handle will create and use a
257	suitable one, which will write and expect UTF-8 encoded JSON texts.	471	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		472	texts.
258		473
259	Note that you are responsible to depend on the JSON module if you want to	474	Note that you are responsible to depend on the JSON module if you want to
260	use this functionality, as AnyEvent does not have a dependency itself.	475	use this functionality, as AnyEvent does not have a dependency itself.
261		476
262	=item filter_r => $cb
263
264	=item filter_w => $cb
265
266	These exist, but are undocumented at this time.
267
268	=back	477	=back
269		478
270	=cut	479	=cut
271		480
272	sub new {	481	sub new {
273	my $class = shift;	482	my $class = shift;
274
275	my $self = bless { @_ }, $class;	483	my $self = bless { @_ }, $class;
276		484
277	$self->{fh} or Carp::croak "mandatory argument fh is missing";	485	if ($self->{fh}) {
		486	$self->_start;
		487	return unless $self->{fh}; # could be gone by now
		488
		489	} elsif ($self->{connect}) {
		490	require AnyEvent::Socket;
		491
		492	$self->{peername} = $self->{connect}[0]
		493	unless exists $self->{peername};
		494
		495	$self->{_skip_drain_rbuf} = 1;
		496
		497	{
		498	Scalar::Util::weaken (my $self = $self);
		499
		500	$self->{_connect} =
		501	AnyEvent::Socket::tcp_connect (
		502	$self->{connect}[0],
		503	$self->{connect}[1],
		504	sub {
		505	my ($fh, $host, $port, $retry) = @_;
		506
		507	if ($fh) {
		508	$self->{fh} = $fh;
		509
		510	delete $self->{_skip_drain_rbuf};
		511	$self->_start;
		512
		513	$self->{on_connect}
		514	and $self->{on_connect}($self, $host, $port, sub {
		515	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		516	$self->{_skip_drain_rbuf} = 1;
		517	&$retry;
		518	});
		519
		520	} else {
		521	if ($self->{on_connect_error}) {
		522	$self->{on_connect_error}($self, "$!");
		523	$self->destroy;
		524	} else {
		525	$self->_error ($!, 1);
		526	}
		527	}
		528	},
		529	sub {
		530	local $self->{fh} = $_[0];
		531
		532	$self->{on_prepare}
		533	? $self->{on_prepare}->($self)
		534	: ()
		535	}
		536	);
		537	}
		538
		539	} else {
		540	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		541	}
		542
		543	$self
		544	}
		545
		546	sub _start {
		547	my ($self) = @_;
		548
		549	# too many clueless people try to use udp and similar sockets
		550	# with AnyEvent::Handle, do them a favour.
		551	my $type = getsockopt $self->{fh}, Socket::SOL_SOCKET (), Socket::SO_TYPE ();
		552	Carp::croak "AnyEvent::Handle: only stream sockets supported, anything else will NOT work!"
		553	if Socket::SOCK_STREAM () != (unpack "I", $type) && defined $type;
278		554
279	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	555	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
280		556
281	if ($self->{tls}) {	557	$self->{_activity} =
282	require Net::SSLeay;	558	$self->{_ractivity} =
		559	$self->{_wactivity} = AE::now;
		560
		561	$self->{read_size} ||= 2048;
		562	$self->{max_read_size} = $self->{read_size}
		563	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		564
		565	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		566	$self->rtimeout (delete $self->{rtimeout} ) if $self->{rtimeout};
		567	$self->wtimeout (delete $self->{wtimeout} ) if $self->{wtimeout};
		568
		569	$self->no_delay (delete $self->{no_delay} ) if exists $self->{no_delay} && $self->{no_delay};
		570	$self->keepalive (delete $self->{keepalive}) if exists $self->{keepalive} && $self->{keepalive};
		571
		572	$self->oobinline (exists $self->{oobinline} ? delete $self->{oobinline} : 1);
		573
283	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	574	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
284	}	575	if $self->{tls};
285		576
286	$self->{_activity} = AnyEvent->now;
287	$self->_timeout;
288
289	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	577	$self->on_drain (delete $self->{on_drain} ) if $self->{on_drain};
290	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
291		578
292	$self->start_read	579	$self->start_read
293	if $self->{on_read};	580	if $self->{on_read} || @{ $self->{_queue} };
294		581
295	$self	582	$self->_drain_wbuf;
296	}
297
298	sub _shutdown {
299	my ($self) = @_;
300
301	delete $self->{_tw};
302	delete $self->{_rw};
303	delete $self->{_ww};
304	delete $self->{fh};
305
306	$self->stoptls;
307
308	delete $self->{on_read};
309	delete $self->{_queue};
310	}	583	}
311		584
312	sub _error {	585	sub _error {
313	my ($self, $errno, $fatal) = @_;	586	my ($self, $errno, $fatal, $message) = @_;
314
315	$self->_shutdown
316	if $fatal;
317		587
318	$! = $errno;	588	$! = $errno;
		589	$message ||= "$!";
319		590
320	if ($self->{on_error}) {	591	if ($self->{on_error}) {
321	$self->{on_error}($self, $fatal);	592	$self->{on_error}($self, $fatal, $message);
322	} else {	593	$self->destroy if $fatal;
		594	} elsif ($self->{fh} || $self->{connect}) {
		595	$self->destroy;
323	Carp::croak "AnyEvent::Handle uncaught error: $!";	596	Carp::croak "AnyEvent::Handle uncaught error: $message";
324	}	597	}
325	}	598	}
326		599
327	=item $fh = $handle->fh	600	=item $fh = $handle->fh
328		601
329	This method returns the file handle of the L<AnyEvent::Handle> object.	602	This method returns the file handle used to create the L<AnyEvent::Handle> object.
330		603
331	=cut	604	=cut
332		605
333	sub fh { $_[0]{fh} }	606	sub fh { $_[0]{fh} }
334		607
…		…
352	$_[0]{on_eof} = $_[1];	625	$_[0]{on_eof} = $_[1];
353	}	626	}
354		627
355	=item $handle->on_timeout ($cb)	628	=item $handle->on_timeout ($cb)
356		629
357	Replace the current C<on_timeout> callback, or disables the callback	630	=item $handle->on_rtimeout ($cb)
358	(but not the timeout) if C<$cb> = C<undef>. See C<timeout> constructor
359	argument.
360		631
361	=cut	632	=item $handle->on_wtimeout ($cb)
362		633
363	sub on_timeout {	634	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
364	$_[0]{on_timeout} = $_[1];	635	callback, or disables the callback (but not the timeout) if C<$cb> =
365	}	636	C<undef>. See the C<timeout> constructor argument and method.
		637
		638	=cut
		639
		640	# see below
366		641
367	=item $handle->autocork ($boolean)	642	=item $handle->autocork ($boolean)
368		643
369	Enables or disables the current autocork behaviour (see C<autocork>	644	Enables or disables the current autocork behaviour (see C<autocork>
370	constructor argument).	645	constructor argument). Changes will only take effect on the next write.
371		646
372	=cut	647	=cut
		648
		649	sub autocork {
		650	$_[0]{autocork} = $_[1];
		651	}
373		652
374	=item $handle->no_delay ($boolean)	653	=item $handle->no_delay ($boolean)
375		654
376	Enables or disables the C<no_delay> setting (see constructor argument of	655	Enables or disables the C<no_delay> setting (see constructor argument of
377	the same name for details).	656	the same name for details).
…		…
379	=cut	658	=cut
380		659
381	sub no_delay {	660	sub no_delay {
382	$_[0]{no_delay} = $_[1];	661	$_[0]{no_delay} = $_[1];
383		662
		663	setsockopt $_[0]{fh}, Socket::IPPROTO_TCP (), Socket::TCP_NODELAY (), int $_[1]
		664	if $_[0]{fh};
		665	}
		666
		667	=item $handle->keepalive ($boolean)
		668
		669	Enables or disables the C<keepalive> setting (see constructor argument of
		670	the same name for details).
		671
		672	=cut
		673
		674	sub keepalive {
		675	$_[0]{keepalive} = $_[1];
		676
384	eval {	677	eval {
385	local $SIG{__DIE__};	678	local $SIG{__DIE__};
386	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1];	679	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		680	if $_[0]{fh};
387	};	681	};
388	}	682	}
389		683
		684	=item $handle->oobinline ($boolean)
		685
		686	Enables or disables the C<oobinline> setting (see constructor argument of
		687	the same name for details).
		688
		689	=cut
		690
		691	sub oobinline {
		692	$_[0]{oobinline} = $_[1];
		693
		694	eval {
		695	local $SIG{__DIE__};
		696	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_OOBINLINE (), int $_[1]
		697	if $_[0]{fh};
		698	};
		699	}
		700
		701	=item $handle->keepalive ($boolean)
		702
		703	Enables or disables the C<keepalive> setting (see constructor argument of
		704	the same name for details).
		705
		706	=cut
		707
		708	sub keepalive {
		709	$_[0]{keepalive} = $_[1];
		710
		711	eval {
		712	local $SIG{__DIE__};
		713	setsockopt $_[0]{fh}, Socket::SOL_SOCKET (), Socket::SO_KEEPALIVE (), int $_[1]
		714	if $_[0]{fh};
		715	};
		716	}
		717
		718	=item $handle->on_starttls ($cb)
		719
		720	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		721
		722	=cut
		723
		724	sub on_starttls {
		725	$_[0]{on_starttls} = $_[1];
		726	}
		727
		728	=item $handle->on_stoptls ($cb)
		729
		730	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		731
		732	=cut
		733
		734	sub on_stoptls {
		735	$_[0]{on_stoptls} = $_[1];
		736	}
		737
		738	=item $handle->rbuf_max ($max_octets)
		739
		740	Configures the C<rbuf_max> setting (C<undef> disables it).
		741
		742	=cut
		743
		744	sub rbuf_max {
		745	$_[0]{rbuf_max} = $_[1];
		746	}
		747
390	#############################################################################	748	#############################################################################
391		749
392	=item $handle->timeout ($seconds)	750	=item $handle->timeout ($seconds)
393		751
		752	=item $handle->rtimeout ($seconds)
		753
		754	=item $handle->wtimeout ($seconds)
		755
394	Configures (or disables) the inactivity timeout.	756	Configures (or disables) the inactivity timeout.
395		757
396	=cut	758	=item $handle->timeout_reset
397		759
398	sub timeout {	760	=item $handle->rtimeout_reset
		761
		762	=item $handle->wtimeout_reset
		763
		764	Reset the activity timeout, as if data was received or sent.
		765
		766	These methods are cheap to call.
		767
		768	=cut
		769
		770	for my $dir ("", "r", "w") {
		771	my $timeout = "${dir}timeout";
		772	my $tw = "_${dir}tw";
		773	my $on_timeout = "on_${dir}timeout";
		774	my $activity = "_${dir}activity";
		775	my $cb;
		776
		777	*$on_timeout = sub {
		778	$_[0]{$on_timeout} = $_[1];
		779	};
		780
		781	*$timeout = sub {
399	my ($self, $timeout) = @_;	782	my ($self, $new_value) = @_;
400		783
		784	$new_value >= 0
		785	or Carp::croak "AnyEvent::Handle->$timeout called with negative timeout ($new_value), caught";
		786
401	$self->{timeout} = $timeout;	787	$self->{$timeout} = $new_value;
402	$self->_timeout;	788	delete $self->{$tw}; &$cb;
403	}	789	};
404		790
		791	*{"${dir}timeout_reset"} = sub {
		792	$_[0]{$activity} = AE::now;
		793	};
		794
		795	# main workhorse:
405	# reset the timeout watcher, as neccessary	796	# reset the timeout watcher, as neccessary
406	# also check for time-outs	797	# also check for time-outs
407	sub _timeout {	798	$cb = sub {
408	my ($self) = @_;	799	my ($self) = @_;
409		800
410	if ($self->{timeout}) {	801	if ($self->{$timeout} && $self->{fh}) {
411	my $NOW = AnyEvent->now;	802	my $NOW = AE::now;
412		803
413	# when would the timeout trigger?	804	# when would the timeout trigger?
414	my $after = $self->{_activity} + $self->{timeout} - $NOW;	805	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
415		806
416	# now or in the past already?	807	# now or in the past already?
417	if ($after <= 0) {	808	if ($after <= 0) {
418	$self->{_activity} = $NOW;	809	$self->{$activity} = $NOW;
419		810
420	if ($self->{on_timeout}) {	811	if ($self->{$on_timeout}) {
421	$self->{on_timeout}($self);	812	$self->{$on_timeout}($self);
422	} else {	813	} else {
423	$self->_error (&Errno::ETIMEDOUT);	814	$self->_error (Errno::ETIMEDOUT);
		815	}
		816
		817	# callback could have changed timeout value, optimise
		818	return unless $self->{$timeout};
		819
		820	# calculate new after
		821	$after = $self->{$timeout};
424	}	822	}
425		823
426	# callback could have changed timeout value, optimise	824	Scalar::Util::weaken $self;
427	return unless $self->{timeout};	825	return unless $self; # ->error could have destroyed $self
428		826
429	# calculate new after	827	$self->{$tw} ||= AE::timer $after, 0, sub {
430	$after = $self->{timeout};	828	delete $self->{$tw};
		829	$cb->($self);
		830	};
		831	} else {
		832	delete $self->{$tw};
431	}	833	}
432
433	Scalar::Util::weaken $self;
434	return unless $self; # ->error could have destroyed $self
435
436	$self->{_tw} ||= AnyEvent->timer (after => $after, cb => sub {
437	delete $self->{_tw};
438	$self->_timeout;
439	});
440	} else {
441	delete $self->{_tw};
442	}	834	}
443	}	835	}
444		836
445	#############################################################################	837	#############################################################################
446		838
…		…
462	=item $handle->on_drain ($cb)	854	=item $handle->on_drain ($cb)
463		855
464	Sets the C<on_drain> callback or clears it (see the description of	856	Sets the C<on_drain> callback or clears it (see the description of
465	C<on_drain> in the constructor).	857	C<on_drain> in the constructor).
466		858
		859	This method may invoke callbacks (and therefore the handle might be
		860	destroyed after it returns).
		861
467	=cut	862	=cut
468		863
469	sub on_drain {	864	sub on_drain {
470	my ($self, $cb) = @_;	865	my ($self, $cb) = @_;
471		866
472	$self->{on_drain} = $cb;	867	$self->{on_drain} = $cb;
473		868
474	$cb->($self)	869	$cb->($self)
475	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	870	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
476	}	871	}
477		872
478	=item $handle->push_write ($data)	873	=item $handle->push_write ($data)
479		874
480	Queues the given scalar to be written. You can push as much data as you	875	Queues the given scalar to be written. You can push as much data as you
481	want (only limited by the available memory), as C<AnyEvent::Handle>	876	want (only limited by the available memory), as C<AnyEvent::Handle>
482	buffers it independently of the kernel.	877	buffers it independently of the kernel.
483		878
		879	This method may invoke callbacks (and therefore the handle might be
		880	destroyed after it returns).
		881
484	=cut	882	=cut
485		883
486	sub _drain_wbuf {	884	sub _drain_wbuf {
487	my ($self) = @_;	885	my ($self) = @_;
488		886
…		…
491	Scalar::Util::weaken $self;	889	Scalar::Util::weaken $self;
492		890
493	my $cb = sub {	891	my $cb = sub {
494	my $len = syswrite $self->{fh}, $self->{wbuf};	892	my $len = syswrite $self->{fh}, $self->{wbuf};
495		893
496	if ($len >= 0) {	894	if (defined $len) {
497	substr $self->{wbuf}, 0, $len, "";	895	substr $self->{wbuf}, 0, $len, "";
498		896
499	$self->{_activity} = AnyEvent->now;	897	$self->{_activity} = $self->{_wactivity} = AE::now;
500		898
501	$self->{on_drain}($self)	899	$self->{on_drain}($self)
502	if $self->{low_water_mark} >= length $self->{wbuf}	900	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
503	&& $self->{on_drain};	901	&& $self->{on_drain};
504		902
505	delete $self->{_ww} unless length $self->{wbuf};	903	delete $self->{_ww} unless length $self->{wbuf};
506	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	904	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
507	$self->_error ($!, 1);	905	$self->_error ($!, 1);
…		…
510		908
511	# try to write data immediately	909	# try to write data immediately
512	$cb->() unless $self->{autocork};	910	$cb->() unless $self->{autocork};
513		911
514	# if still data left in wbuf, we need to poll	912	# if still data left in wbuf, we need to poll
515	$self->{_ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb)	913	$self->{_ww} = AE::io $self->{fh}, 1, $cb
516	if length $self->{wbuf};	914	if length $self->{wbuf};
517	};	915	};
518	}	916	}
519		917
520	our %WH;	918	our %WH;
521		919
		920	# deprecated
522	sub register_write_type($$) {	921	sub register_write_type($$) {
523	$WH{$_[0]} = $_[1];	922	$WH{$_[0]} = $_[1];
524	}	923	}
525		924
526	sub push_write {	925	sub push_write {
527	my $self = shift;	926	my $self = shift;
528		927
529	if (@_ > 1) {	928	if (@_ > 1) {
530	my $type = shift;	929	my $type = shift;
531		930
		931	@_ = ($WH{$type} ||= _load_func "$type\::anyevent_write_type"
532	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	932	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_write")
533	->($self, @_);	933	->($self, @_);
534	}	934	}
535		935
		936	# we downgrade here to avoid hard-to-track-down bugs,
		937	# and diagnose the problem earlier and better.
		938
536	if ($self->{filter_w}) {	939	if ($self->{tls}) {
537	$self->{filter_w}($self, \$_[0]);	940	utf8::downgrade $self->{_tls_wbuf} .= $_[0];
		941	&_dotls ($self) if $self->{fh};
538	} else {	942	} else {
539	$self->{wbuf} .= $_[0];	943	utf8::downgrade $self->{wbuf} .= $_[0];
540	$self->_drain_wbuf;	944	$self->_drain_wbuf if $self->{fh};
541	}	945	}
542	}	946	}
543		947
544	=item $handle->push_write (type => @args)	948	=item $handle->push_write (type => @args)
545		949
546	Instead of formatting your data yourself, you can also let this module do	950	Instead of formatting your data yourself, you can also let this module
547	the job by specifying a type and type-specific arguments.	951	do the job by specifying a type and type-specific arguments. You
		952	can also specify the (fully qualified) name of a package, in which
		953	case AnyEvent tries to load the package and then expects to find the
		954	C<anyevent_write_type> function inside (see "custom write types", below).
548		955
549	Predefined types are (if you have ideas for additional types, feel free to	956	Predefined types are (if you have ideas for additional types, feel free to
550	drop by and tell us):	957	drop by and tell us):
551		958
552	=over 4	959	=over 4
…		…
559	=cut	966	=cut
560		967
561	register_write_type netstring => sub {	968	register_write_type netstring => sub {
562	my ($self, $string) = @_;	969	my ($self, $string) = @_;
563		970
564	sprintf "%d:%s,", (length $string), $string	971	(length $string) . ":$string,"
565	};	972	};
566		973
567	=item packstring => $format, $data	974	=item packstring => $format, $data
568		975
569	An octet string prefixed with an encoded length. The encoding C<$format>	976	An octet string prefixed with an encoded length. The encoding C<$format>
…		…
609	Other languages could read single lines terminated by a newline and pass	1016	Other languages could read single lines terminated by a newline and pass
610	this line into their JSON decoder of choice.	1017	this line into their JSON decoder of choice.
611		1018
612	=cut	1019	=cut
613		1020
		1021	sub json_coder() {
		1022	eval { require JSON::XS; JSON::XS->new->utf8 }
		1023	|| do { require JSON; JSON->new->utf8 }
		1024	}
		1025
614	register_write_type json => sub {	1026	register_write_type json => sub {
615	my ($self, $ref) = @_;	1027	my ($self, $ref) = @_;
616		1028
617	require JSON;	1029	my $json = $self->{json} ||= json_coder;
618		1030
619	$self->{json} ? $self->{json}->encode ($ref)	1031	$json->encode ($ref)
620	: JSON::encode_json ($ref)
621	};	1032	};
622		1033
623	=item storable => $reference	1034	=item storable => $reference
624		1035
625	Freezes the given reference using L<Storable> and writes it to the	1036	Freezes the given reference using L<Storable> and writes it to the
…		…
635	pack "w/a*", Storable::nfreeze ($ref)	1046	pack "w/a*", Storable::nfreeze ($ref)
636	};	1047	};
637		1048
638	=back	1049	=back
639		1050
640	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	1051	=item $handle->push_shutdown
641		1052
642	This function (not method) lets you add your own types to C<push_write>.	1053	Sometimes you know you want to close the socket after writing your data
		1054	before it was actually written. One way to do that is to replace your
		1055	C<on_drain> handler by a callback that shuts down the socket (and set
		1056	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		1057	replaces the C<on_drain> callback with:
		1058
		1059	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		1060
		1061	This simply shuts down the write side and signals an EOF condition to the
		1062	the peer.
		1063
		1064	You can rely on the normal read queue and C<on_eof> handling
		1065	afterwards. This is the cleanest way to close a connection.
		1066
		1067	This method may invoke callbacks (and therefore the handle might be
		1068	destroyed after it returns).
		1069
		1070	=cut
		1071
		1072	sub push_shutdown {
		1073	my ($self) = @_;
		1074
		1075	delete $self->{low_water_mark};
		1076	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		1077	}
		1078
		1079	=item custom write types - Package::anyevent_write_type $handle, @args
		1080
		1081	Instead of one of the predefined types, you can also specify the name of
		1082	a package. AnyEvent will try to load the package and then expects to find
		1083	a function named C<anyevent_write_type> inside. If it isn't found, it
		1084	progressively tries to load the parent package until it either finds the
		1085	function (good) or runs out of packages (bad).
		1086
643	Whenever the given C<type> is used, C<push_write> will invoke the code	1087	Whenever the given C<type> is used, C<push_write> will the function with
644	reference with the handle object and the remaining arguments.	1088	the handle object and the remaining arguments.
645		1089
646	The code reference is supposed to return a single octet string that will	1090	The function is supposed to return a single octet string that will be
647	be appended to the write buffer.	1091	appended to the write buffer, so you cna mentally treat this function as a
		1092	"arguments to on-the-wire-format" converter.
648		1093
649	Note that this is a function, and all types registered this way will be	1094	Example: implement a custom write type C<join> that joins the remaining
650	global, so try to use unique names.	1095	arguments using the first one.
		1096
		1097	$handle->push_write (My::Type => " ", 1,2,3);
		1098
		1099	# uses the following package, which can be defined in the "My::Type" or in
		1100	# the "My" modules to be auto-loaded, or just about anywhere when the
		1101	# My::Type::anyevent_write_type is defined before invoking it.
		1102
		1103	package My::Type;
		1104
		1105	sub anyevent_write_type {
		1106	my ($handle, $delim, @args) = @_;
		1107
		1108	join $delim, @args
		1109	}
651		1110
652	=cut	1111	=cut
653		1112
654	#############################################################################	1113	#############################################################################
655		1114
…		…
664	ways, the "simple" way, using only C<on_read> and the "complex" way, using	1123	ways, the "simple" way, using only C<on_read> and the "complex" way, using
665	a queue.	1124	a queue.
666		1125
667	In the simple case, you just install an C<on_read> callback and whenever	1126	In the simple case, you just install an C<on_read> callback and whenever
668	new data arrives, it will be called. You can then remove some data (if	1127	new data arrives, it will be called. You can then remove some data (if
669	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna	1128	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you can
670	leave the data there if you want to accumulate more (e.g. when only a	1129	leave the data there if you want to accumulate more (e.g. when only a
671	partial message has been received so far).	1130	partial message has been received so far), or change the read queue with
		1131	e.g. C<push_read>.
672		1132
673	In the more complex case, you want to queue multiple callbacks. In this	1133	In the more complex case, you want to queue multiple callbacks. In this
674	case, AnyEvent::Handle will call the first queued callback each time new	1134	case, AnyEvent::Handle will call the first queued callback each time new
675	data arrives (also the first time it is queued) and removes it when it has	1135	data arrives (also the first time it is queued) and remove it when it has
676	done its job (see C<push_read>, below).	1136	done its job (see C<push_read>, below).
677		1137
678	This way you can, for example, push three line-reads, followed by reading	1138	This way you can, for example, push three line-reads, followed by reading
679	a chunk of data, and AnyEvent::Handle will execute them in order.	1139	a chunk of data, and AnyEvent::Handle will execute them in order.
680		1140
…		…
737	=cut	1197	=cut
738		1198
739	sub _drain_rbuf {	1199	sub _drain_rbuf {
740	my ($self) = @_;	1200	my ($self) = @_;
741		1201
		1202	# avoid recursion
		1203	return if $self->{_skip_drain_rbuf};
742	local $self->{_in_drain} = 1;	1204	local $self->{_skip_drain_rbuf} = 1;
743
744	if (
745	defined $self->{rbuf_max}
746	&& $self->{rbuf_max} < length $self->{rbuf}
747	) {
748	$self->_error (&Errno::ENOSPC, 1), return;
749	}
750		1205
751	while () {	1206	while () {
		1207	# we need to use a separate tls read buffer, as we must not receive data while
		1208	# we are draining the buffer, and this can only happen with TLS.
		1209	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1210	if exists $self->{_tls_rbuf};
		1211
752	my $len = length $self->{rbuf};	1212	my $len = length $self->{rbuf};
753		1213
754	if (my $cb = shift @{ $self->{_queue} }) {	1214	if (my $cb = shift @{ $self->{_queue} }) {
755	unless ($cb->($self)) {	1215	unless ($cb->($self)) {
756	if ($self->{_eof}) {	1216	# no progress can be made
757	# no progress can be made (not enough data and no data forthcoming)	1217	# (not enough data and no data forthcoming)
758	$self->_error (&Errno::EPIPE, 1), return;	1218	$self->_error (Errno::EPIPE, 1), return
759	}	1219	if $self->{_eof};
760		1220
761	unshift @{ $self->{_queue} }, $cb;	1221	unshift @{ $self->{_queue} }, $cb;
762	last;	1222	last;
763	}	1223	}
764	} elsif ($self->{on_read}) {	1224	} elsif ($self->{on_read}) {
…		…
771	&& !@{ $self->{_queue} } # and the queue is still empty	1231	&& !@{ $self->{_queue} } # and the queue is still empty
772	&& $self->{on_read} # but we still have on_read	1232	&& $self->{on_read} # but we still have on_read
773	) {	1233	) {
774	# no further data will arrive	1234	# no further data will arrive
775	# so no progress can be made	1235	# so no progress can be made
776	$self->_error (&Errno::EPIPE, 1), return	1236	$self->_error (Errno::EPIPE, 1), return
777	if $self->{_eof};	1237	if $self->{_eof};
778		1238
779	last; # more data might arrive	1239	last; # more data might arrive
780	}	1240	}
781	} else {	1241	} else {
782	# read side becomes idle	1242	# read side becomes idle
783	delete $self->{_rw};	1243	delete $self->{_rw} unless $self->{tls};
784	last;	1244	last;
785	}	1245	}
786	}	1246	}
787		1247
788	if ($self->{_eof}) {	1248	if ($self->{_eof}) {
789	if ($self->{on_eof}) {	1249	$self->{on_eof}
790	$self->{on_eof}($self)	1250	? $self->{on_eof}($self)
791	} else {	1251	: $self->_error (0, 1, "Unexpected end-of-file");
792	$self->_error (0, 1);	1252
793	}	1253	return;
		1254	}
		1255
		1256	if (
		1257	defined $self->{rbuf_max}
		1258	&& $self->{rbuf_max} < length $self->{rbuf}
		1259	) {
		1260	$self->_error (Errno::ENOSPC, 1), return;
794	}	1261	}
795		1262
796	# may need to restart read watcher	1263	# may need to restart read watcher
797	unless ($self->{_rw}) {	1264	unless ($self->{_rw}) {
798	$self->start_read	1265	$self->start_read
…		…
804		1271
805	This replaces the currently set C<on_read> callback, or clears it (when	1272	This replaces the currently set C<on_read> callback, or clears it (when
806	the new callback is C<undef>). See the description of C<on_read> in the	1273	the new callback is C<undef>). See the description of C<on_read> in the
807	constructor.	1274	constructor.
808		1275
		1276	This method may invoke callbacks (and therefore the handle might be
		1277	destroyed after it returns).
		1278
809	=cut	1279	=cut
810		1280
811	sub on_read {	1281	sub on_read {
812	my ($self, $cb) = @_;	1282	my ($self, $cb) = @_;
813		1283
814	$self->{on_read} = $cb;	1284	$self->{on_read} = $cb;
815	$self->_drain_rbuf if $cb && !$self->{_in_drain};	1285	$self->_drain_rbuf if $cb;
816	}	1286	}
817		1287
818	=item $handle->rbuf	1288	=item $handle->rbuf
819		1289
820	Returns the read buffer (as a modifiable lvalue).	1290	Returns the read buffer (as a modifiable lvalue). You can also access the
		1291	read buffer directly as the C<< ->{rbuf} >> member, if you want (this is
		1292	much faster, and no less clean).
821		1293
822	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1294	The only operation allowed on the read buffer (apart from looking at it)
823	you want.	1295	is removing data from its beginning. Otherwise modifying or appending to
		1296	it is not allowed and will lead to hard-to-track-down bugs.
824		1297
825	NOTE: The read buffer should only be used or modified if the C<on_read>,	1298	NOTE: The read buffer should only be used or modified in the C<on_read>
826	C<push_read> or C<unshift_read> methods are used. The other read methods	1299	callback or when C<push_read> or C<unshift_read> are used with a single
827	automatically manage the read buffer.	1300	callback (i.e. untyped). Typed C<push_read> and C<unshift_read> methods
		1301	will manage the read buffer on their own.
828		1302
829	=cut	1303	=cut
830		1304
831	sub rbuf : lvalue {	1305	sub rbuf : lvalue {
832	$_[0]{rbuf}	1306	$_[0]{rbuf}
…		…
849		1323
850	If enough data was available, then the callback must remove all data it is	1324	If enough data was available, then the callback must remove all data it is
851	interested in (which can be none at all) and return a true value. After returning	1325	interested in (which can be none at all) and return a true value. After returning
852	true, it will be removed from the queue.	1326	true, it will be removed from the queue.
853		1327
		1328	These methods may invoke callbacks (and therefore the handle might be
		1329	destroyed after it returns).
		1330
854	=cut	1331	=cut
855		1332
856	our %RH;	1333	our %RH;
857		1334
858	sub register_read_type($$) {	1335	sub register_read_type($$) {
…		…
864	my $cb = pop;	1341	my $cb = pop;
865		1342
866	if (@_) {	1343	if (@_) {
867	my $type = shift;	1344	my $type = shift;
868		1345
		1346	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
869	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1347	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::push_read")
870	->($self, $cb, @_);	1348	->($self, $cb, @_);
871	}	1349	}
872		1350
873	push @{ $self->{_queue} }, $cb;	1351	push @{ $self->{_queue} }, $cb;
874	$self->_drain_rbuf unless $self->{_in_drain};	1352	$self->_drain_rbuf;
875	}	1353	}
876		1354
877	sub unshift_read {	1355	sub unshift_read {
878	my $self = shift;	1356	my $self = shift;
879	my $cb = pop;	1357	my $cb = pop;
880		1358
881	if (@_) {	1359	if (@_) {
882	my $type = shift;	1360	my $type = shift;
883		1361
		1362	$cb = ($RH{$type} ||= _load_func "$type\::anyevent_read_type"
884	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1363	or Carp::croak "unsupported/unloadable type '$type' passed to AnyEvent::Handle::unshift_read")
885	->($self, $cb, @_);	1364	->($self, $cb, @_);
886	}	1365	}
887		1366
888
889	unshift @{ $self->{_queue} }, $cb;	1367	unshift @{ $self->{_queue} }, $cb;
890	$self->_drain_rbuf unless $self->{_in_drain};	1368	$self->_drain_rbuf;
891	}	1369	}
892		1370
893	=item $handle->push_read (type => @args, $cb)	1371	=item $handle->push_read (type => @args, $cb)
894		1372
895	=item $handle->unshift_read (type => @args, $cb)	1373	=item $handle->unshift_read (type => @args, $cb)
896		1374
897	Instead of providing a callback that parses the data itself you can chose	1375	Instead of providing a callback that parses the data itself you can chose
898	between a number of predefined parsing formats, for chunks of data, lines	1376	between a number of predefined parsing formats, for chunks of data, lines
899	etc.	1377	etc. You can also specify the (fully qualified) name of a package, in
		1378	which case AnyEvent tries to load the package and then expects to find the
		1379	C<anyevent_read_type> function inside (see "custom read types", below).
900		1380
901	Predefined types are (if you have ideas for additional types, feel free to	1381	Predefined types are (if you have ideas for additional types, feel free to
902	drop by and tell us):	1382	drop by and tell us):
903		1383
904	=over 4	1384	=over 4
…		…
996	the receive buffer when neither C<$accept> nor C<$reject> match,	1476	the receive buffer when neither C<$accept> nor C<$reject> match,
997	and everything preceding and including the match will be accepted	1477	and everything preceding and including the match will be accepted
998	unconditionally. This is useful to skip large amounts of data that you	1478	unconditionally. This is useful to skip large amounts of data that you
999	know cannot be matched, so that the C<$accept> or C<$reject> regex do not	1479	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
1000	have to start matching from the beginning. This is purely an optimisation	1480	have to start matching from the beginning. This is purely an optimisation
1001	and is usually worth only when you expect more than a few kilobytes.	1481	and is usually worth it only when you expect more than a few kilobytes.
1002		1482
1003	Example: expect a http header, which ends at C<\015\012\015\012>. Since we	1483	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
1004	expect the header to be very large (it isn't in practise, but...), we use	1484	expect the header to be very large (it isn't in practice, but...), we use
1005	a skip regex to skip initial portions. The skip regex is tricky in that	1485	a skip regex to skip initial portions. The skip regex is tricky in that
1006	it only accepts something not ending in either \015 or \012, as these are	1486	it only accepts something not ending in either \015 or \012, as these are
1007	required for the accept regex.	1487	required for the accept regex.
1008		1488
1009	$handle->push_read (regex =>	1489	$handle->push_read (regex =>
…		…
1028	return 1;	1508	return 1;
1029	}	1509	}
1030		1510
1031	# reject	1511	# reject
1032	if ($reject && $$rbuf =~ $reject) {	1512	if ($reject && $$rbuf =~ $reject) {
1033	$self->_error (&Errno::EBADMSG);	1513	$self->_error (Errno::EBADMSG);
1034	}	1514	}
1035		1515
1036	# skip	1516	# skip
1037	if ($skip && $$rbuf =~ $skip) {	1517	if ($skip && $$rbuf =~ $skip) {
1038	$data .= substr $$rbuf, 0, $+[0], "";	1518	$data .= substr $$rbuf, 0, $+[0], "";
…		…
1054	my ($self, $cb) = @_;	1534	my ($self, $cb) = @_;
1055		1535
1056	sub {	1536	sub {
1057	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1537	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
1058	if ($_[0]{rbuf} =~ /[^0-9]/) {	1538	if ($_[0]{rbuf} =~ /[^0-9]/) {
1059	$self->_error (&Errno::EBADMSG);	1539	$self->_error (Errno::EBADMSG);
1060	}	1540	}
1061	return;	1541	return;
1062	}	1542	}
1063		1543
1064	my $len = $1;	1544	my $len = $1;
…		…
1067	my $string = $_[1];	1547	my $string = $_[1];
1068	$_[0]->unshift_read (chunk => 1, sub {	1548	$_[0]->unshift_read (chunk => 1, sub {
1069	if ($_[1] eq ",") {	1549	if ($_[1] eq ",") {
1070	$cb->($_[0], $string);	1550	$cb->($_[0], $string);
1071	} else {	1551	} else {
1072	$self->_error (&Errno::EBADMSG);	1552	$self->_error (Errno::EBADMSG);
1073	}	1553	}
1074	});	1554	});
1075	});	1555	});
1076		1556
1077	1	1557	1
…		…
1083	An octet string prefixed with an encoded length. The encoding C<$format>	1563	An octet string prefixed with an encoded length. The encoding C<$format>
1084	uses the same format as a Perl C<pack> format, but must specify a single	1564	uses the same format as a Perl C<pack> format, but must specify a single
1085	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an	1565	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
1086	optional C<!>, C<< < >> or C<< > >> modifier).	1566	optional C<!>, C<< < >> or C<< > >> modifier).
1087		1567
1088	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.	1568	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1569	EPP uses a prefix of C<N> (4 octtes).
1089		1570
1090	Example: read a block of data prefixed by its length in BER-encoded	1571	Example: read a block of data prefixed by its length in BER-encoded
1091	format (very efficient).	1572	format (very efficient).
1092		1573
1093	$handle->push_read (packstring => "w", sub {	1574	$handle->push_read (packstring => "w", sub {
…		…
1123	}	1604	}
1124	};	1605	};
1125		1606
1126	=item json => $cb->($handle, $hash_or_arrayref)	1607	=item json => $cb->($handle, $hash_or_arrayref)
1127		1608
1128	Reads a JSON object or array, decodes it and passes it to the callback.	1609	Reads a JSON object or array, decodes it and passes it to the
		1610	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1129		1611
1130	If a C<json> object was passed to the constructor, then that will be used	1612	If a C<json> object was passed to the constructor, then that will be used
1131	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1613	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1132		1614
1133	This read type uses the incremental parser available with JSON version	1615	This read type uses the incremental parser available with JSON version
…		…
1142	=cut	1624	=cut
1143		1625
1144	register_read_type json => sub {	1626	register_read_type json => sub {
1145	my ($self, $cb) = @_;	1627	my ($self, $cb) = @_;
1146		1628
1147	require JSON;	1629	my $json = $self->{json} ||= json_coder;
1148		1630
1149	my $data;	1631	my $data;
1150	my $rbuf = \$self->{rbuf};	1632	my $rbuf = \$self->{rbuf};
1151		1633
1152	my $json = $self->{json} ||= JSON->new->utf8;
1153
1154	sub {	1634	sub {
1155	my $ref = $json->incr_parse ($self->{rbuf});	1635	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1156		1636
1157	if ($ref) {	1637	if ($ref) {
1158	$self->{rbuf} = $json->incr_text;	1638	$self->{rbuf} = $json->incr_text;
1159	$json->incr_text = "";	1639	$json->incr_text = "";
1160	$cb->($self, $ref);	1640	$cb->($self, $ref);
1161		1641
1162	1	1642	1
		1643	} elsif ($@) {
		1644	# error case
		1645	$json->incr_skip;
		1646
		1647	$self->{rbuf} = $json->incr_text;
		1648	$json->incr_text = "";
		1649
		1650	$self->_error (Errno::EBADMSG);
		1651
		1652	()
1163	} else {	1653	} else {
1164	$self->{rbuf} = "";	1654	$self->{rbuf} = "";
		1655
1165	()	1656	()
1166	}	1657	}
1167	}	1658	}
1168	};	1659	};
1169		1660
…		…
1201	# read remaining chunk	1692	# read remaining chunk
1202	$_[0]->unshift_read (chunk => $len, sub {	1693	$_[0]->unshift_read (chunk => $len, sub {
1203	if (my $ref = eval { Storable::thaw ($_[1]) }) {	1694	if (my $ref = eval { Storable::thaw ($_[1]) }) {
1204	$cb->($_[0], $ref);	1695	$cb->($_[0], $ref);
1205	} else {	1696	} else {
1206	$self->_error (&Errno::EBADMSG);	1697	$self->_error (Errno::EBADMSG);
1207	}	1698	}
1208	});	1699	});
1209	}	1700	}
1210		1701
1211	1	1702	1
1212	}	1703	}
1213	};	1704	};
1214		1705
1215	=back	1706	=back
1216		1707
1217	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)	1708	=item custom read types - Package::anyevent_read_type $handle, $cb, @args
1218		1709
1219	This function (not method) lets you add your own types to C<push_read>.	1710	Instead of one of the predefined types, you can also specify the name
		1711	of a package. AnyEvent will try to load the package and then expects to
		1712	find a function named C<anyevent_read_type> inside. If it isn't found, it
		1713	progressively tries to load the parent package until it either finds the
		1714	function (good) or runs out of packages (bad).
1220		1715
1221	Whenever the given C<type> is used, C<push_read> will invoke the code	1716	Whenever this type is used, C<push_read> will invoke the function with the
1222	reference with the handle object, the callback and the remaining	1717	handle object, the original callback and the remaining arguments.
1223	arguments.
1224		1718
1225	The code reference is supposed to return a callback (usually a closure)	1719	The function is supposed to return a callback (usually a closure) that
1226	that works as a plain read callback (see C<< ->push_read ($cb) >>).	1720	works as a plain read callback (see C<< ->push_read ($cb) >>), so you can
		1721	mentally treat the function as a "configurable read type to read callback"
		1722	converter.
1227		1723
1228	It should invoke the passed callback when it is done reading (remember to	1724	It should invoke the original callback when it is done reading (remember
1229	pass C<$handle> as first argument as all other callbacks do that).	1725	to pass C<$handle> as first argument as all other callbacks do that,
		1726	although there is no strict requirement on this).
1230		1727
1231	Note that this is a function, and all types registered this way will be
1232	global, so try to use unique names.
1233
1234	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,	1728	For examples, see the source of this module (F<perldoc -m
1235	search for C<register_read_type>)).	1729	AnyEvent::Handle>, search for C<register_read_type>)).
1236		1730
1237	=item $handle->stop_read	1731	=item $handle->stop_read
1238		1732
1239	=item $handle->start_read	1733	=item $handle->start_read
1240		1734
…		…
1246	Note that AnyEvent::Handle will automatically C<start_read> for you when	1740	Note that AnyEvent::Handle will automatically C<start_read> for you when
1247	you change the C<on_read> callback or push/unshift a read callback, and it	1741	you change the C<on_read> callback or push/unshift a read callback, and it
1248	will automatically C<stop_read> for you when neither C<on_read> is set nor	1742	will automatically C<stop_read> for you when neither C<on_read> is set nor
1249	there are any read requests in the queue.	1743	there are any read requests in the queue.
1250		1744
		1745	These methods will have no effect when in TLS mode (as TLS doesn't support
		1746	half-duplex connections).
		1747
1251	=cut	1748	=cut
1252		1749
1253	sub stop_read {	1750	sub stop_read {
1254	my ($self) = @_;	1751	my ($self) = @_;
1255		1752
1256	delete $self->{_rw};	1753	delete $self->{_rw} unless $self->{tls};
1257	}	1754	}
1258		1755
1259	sub start_read {	1756	sub start_read {
1260	my ($self) = @_;	1757	my ($self) = @_;
1261		1758
1262	unless ($self->{_rw} || $self->{_eof}) {	1759	unless ($self->{_rw} || $self->{_eof} || !$self->{fh}) {
1263	Scalar::Util::weaken $self;	1760	Scalar::Util::weaken $self;
1264		1761
1265	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1762	$self->{_rw} = AE::io $self->{fh}, 0, sub {
1266	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1763	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1267	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1764	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size}, length $$rbuf;
1268		1765
1269	if ($len > 0) {	1766	if ($len > 0) {
1270	$self->{_activity} = AnyEvent->now;	1767	$self->{_activity} = $self->{_ractivity} = AE::now;
1271		1768
1272	$self->{filter_r}	1769	if ($self->{tls}) {
1273	? $self->{filter_r}($self, $rbuf)	1770	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1274	: $self->{_in_drain} || $self->_drain_rbuf;	1771
		1772	&_dotls ($self);
		1773	} else {
		1774	$self->_drain_rbuf;
		1775	}
		1776
		1777	if ($len == $self->{read_size}) {
		1778	$self->{read_size} *= 2;
		1779	$self->{read_size} = $self->{max_read_size} || MAX_READ_SIZE
		1780	if $self->{read_size} > ($self->{max_read_size} || MAX_READ_SIZE);
		1781	}
1275		1782
1276	} elsif (defined $len) {	1783	} elsif (defined $len) {
1277	delete $self->{_rw};	1784	delete $self->{_rw};
1278	$self->{_eof} = 1;	1785	$self->{_eof} = 1;
1279	$self->_drain_rbuf unless $self->{_in_drain};	1786	$self->_drain_rbuf;
1280		1787
1281	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	1788	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
1282	return $self->_error ($!, 1);	1789	return $self->_error ($!, 1);
1283	}	1790	}
1284	});	1791	};
1285	}	1792	}
1286	}	1793	}
1287		1794
		1795	our $ERROR_SYSCALL;
		1796	our $ERROR_WANT_READ;
		1797
		1798	sub _tls_error {
		1799	my ($self, $err) = @_;
		1800
		1801	return $self->_error ($!, 1)
		1802	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1803
		1804	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1805
		1806	# reduce error string to look less scary
		1807	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1808
		1809	if ($self->{_on_starttls}) {
		1810	(delete $self->{_on_starttls})->($self, undef, $err);
		1811	&_freetls;
		1812	} else {
		1813	&_freetls;
		1814	$self->_error (Errno::EPROTO, 1, $err);
		1815	}
		1816	}
		1817
		1818	# poll the write BIO and send the data if applicable
		1819	# also decode read data if possible
		1820	# this is basiclaly our TLS state machine
		1821	# more efficient implementations are possible with openssl,
		1822	# but not with the buggy and incomplete Net::SSLeay.
1288	sub _dotls {	1823	sub _dotls {
1289	my ($self) = @_;	1824	my ($self) = @_;
1290		1825
1291	my $buf;	1826	my $tmp;
1292		1827
1293	if (length $self->{_tls_wbuf}) {	1828	if (length $self->{_tls_wbuf}) {
1294	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1829	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1295	substr $self->{_tls_wbuf}, 0, $len, "";	1830	substr $self->{_tls_wbuf}, 0, $tmp, "";
1296	}	1831	}
1297	}
1298		1832
		1833	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1834	return $self->_tls_error ($tmp)
		1835	if $tmp != $ERROR_WANT_READ
		1836	&& ($tmp != $ERROR_SYSCALL || $!);
		1837	}
		1838
		1839	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1840	unless (length $tmp) {
		1841	$self->{_on_starttls}
		1842	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		1843	&_freetls;
		1844
		1845	if ($self->{on_stoptls}) {
		1846	$self->{on_stoptls}($self);
		1847	return;
		1848	} else {
		1849	# let's treat SSL-eof as we treat normal EOF
		1850	delete $self->{_rw};
		1851	$self->{_eof} = 1;
		1852	}
		1853	}
		1854
		1855	$self->{_tls_rbuf} .= $tmp;
		1856	$self->_drain_rbuf;
		1857	$self->{tls} or return; # tls session might have gone away in callback
		1858	}
		1859
		1860	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
		1861	return $self->_tls_error ($tmp)
		1862	if $tmp != $ERROR_WANT_READ
		1863	&& ($tmp != $ERROR_SYSCALL || $!);
		1864
1299	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1865	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1300	$self->{wbuf} .= $buf;	1866	$self->{wbuf} .= $tmp;
1301	$self->_drain_wbuf;	1867	$self->_drain_wbuf;
		1868	$self->{tls} or return; # tls session might have gone away in callback
1302	}	1869	}
1303		1870
1304	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	1871	$self->{_on_starttls}
1305	if (length $buf) {	1872	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
1306	$self->{rbuf} .= $buf;	1873	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
1307	$self->_drain_rbuf unless $self->{_in_drain};
1308	} else {
1309	# let's treat SSL-eof as we treat normal EOF
1310	$self->{_eof} = 1;
1311	$self->_shutdown;
1312	return;
1313	}
1314	}
1315
1316	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
1317
1318	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1319	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1320	return $self->_error ($!, 1);
1321	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
1322	return $self->_error (&Errno::EIO, 1);
1323	}
1324
1325	# all others are fine for our purposes
1326	}
1327	}	1874	}
1328		1875
1329	=item $handle->starttls ($tls[, $tls_ctx])	1876	=item $handle->starttls ($tls[, $tls_ctx])
1330		1877
1331	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1878	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
1332	object is created, you can also do that at a later time by calling	1879	object is created, you can also do that at a later time by calling
1333	C<starttls>.	1880	C<starttls>.
1334		1881
		1882	Starting TLS is currently an asynchronous operation - when you push some
		1883	write data and then call C<< ->starttls >> then TLS negotiation will start
		1884	immediately, after which the queued write data is then sent.
		1885
1335	The first argument is the same as the C<tls> constructor argument (either	1886	The first argument is the same as the C<tls> constructor argument (either
1336	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1887	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1337		1888
1338	The second argument is the optional C<Net::SSLeay::CTX> object that is	1889	The second argument is the optional C<AnyEvent::TLS> object that is used
1339	used when AnyEvent::Handle has to create its own TLS connection object.	1890	when AnyEvent::Handle has to create its own TLS connection object, or
		1891	a hash reference with C<< key => value >> pairs that will be used to
		1892	construct a new context.
1340		1893
1341	The TLS connection object will end up in C<< $handle->{tls} >> after this	1894	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1342	call and can be used or changed to your liking. Note that the handshake	1895	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1343	might have already started when this function returns.	1896	changed to your liking. Note that the handshake might have already started
		1897	when this function returns.
1344		1898
		1899	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		1900	handshakes on the same stream. It is best to not attempt to use the
		1901	stream after stopping TLS.
		1902
		1903	This method may invoke callbacks (and therefore the handle might be
		1904	destroyed after it returns).
		1905
1345	=cut	1906	=cut
		1907
		1908	our %TLS_CACHE; #TODO not yet documented, should we?
1346		1909
1347	sub starttls {	1910	sub starttls {
1348	my ($self, $ssl, $ctx) = @_;	1911	my ($self, $tls, $ctx) = @_;
1349		1912
1350	$self->stoptls;	1913	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1914	if $self->{tls};
1351		1915
1352	if ($ssl eq "accept") {	1916	$self->{tls} = $tls;
1353	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1917	$self->{tls_ctx} = $ctx if @_ > 2;
1354	Net::SSLeay::set_accept_state ($ssl);	1918
1355	} elsif ($ssl eq "connect") {	1919	return unless $self->{fh};
1356	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1920
1357	Net::SSLeay::set_connect_state ($ssl);	1921	require Net::SSLeay;
		1922
		1923	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		1924	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1925
		1926	$tls = delete $self->{tls};
		1927	$ctx = $self->{tls_ctx};
		1928
		1929	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1930
		1931	if ("HASH" eq ref $ctx) {
		1932	require AnyEvent::TLS;
		1933
		1934	if ($ctx->{cache}) {
		1935	my $key = $ctx+0;
		1936	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1937	} else {
		1938	$ctx = new AnyEvent::TLS %$ctx;
		1939	}
		1940	}
1358	}	1941
1359		1942	$self->{tls_ctx} = $ctx || TLS_CTX ();
1360	$self->{tls} = $ssl;	1943	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
1361		1944
1362	# basically, this is deep magic (because SSL_read should have the same issues)	1945	# basically, this is deep magic (because SSL_read should have the same issues)
1363	# but the openssl maintainers basically said: "trust us, it just works".	1946	# but the openssl maintainers basically said: "trust us, it just works".
1364	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1947	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1365	# and mismaintained ssleay-module doesn't even offer them).	1948	# and mismaintained ssleay-module doesn't even offer them).
1366	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1949	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1950	#
		1951	# in short: this is a mess.
		1952	#
		1953	# note that we do not try to keep the length constant between writes as we are required to do.
		1954	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1955	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1956	# have identity issues in that area.
1367	Net::SSLeay::CTX_set_mode ($self->{tls},	1957	# Net::SSLeay::CTX_set_mode ($ssl,
1368	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1958	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
1369	| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1959	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1960	Net::SSLeay::CTX_set_mode ($tls, 1|2);
1370		1961
1371	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1962	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1372	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1963	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1373		1964
		1965	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1966
1374	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1967	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
1375		1968
1376	$self->{filter_w} = sub {	1969	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
1377	$_[0]{_tls_wbuf} .= ${$_[1]};	1970	if $self->{on_starttls};
1378	&_dotls;	1971
1379	};	1972	&_dotls; # need to trigger the initial handshake
1380	$self->{filter_r} = sub {	1973	$self->start_read; # make sure we actually do read
1381	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1382	&_dotls;
1383	};
1384	}	1974	}
1385		1975
1386	=item $handle->stoptls	1976	=item $handle->stoptls
1387		1977
1388	Destroys the SSL connection, if any. Partial read or write data will be	1978	Shuts down the SSL connection - this makes a proper EOF handshake by
1389	lost.	1979	sending a close notify to the other side, but since OpenSSL doesn't
		1980	support non-blocking shut downs, it is not guaranteed that you can re-use
		1981	the stream afterwards.
		1982
		1983	This method may invoke callbacks (and therefore the handle might be
		1984	destroyed after it returns).
1390		1985
1391	=cut	1986	=cut
1392		1987
1393	sub stoptls {	1988	sub stoptls {
1394	my ($self) = @_;	1989	my ($self) = @_;
1395		1990
1396	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1991	if ($self->{tls} && $self->{fh}) {
		1992	Net::SSLeay::shutdown ($self->{tls});
1397		1993
1398	delete $self->{_rbio};	1994	&_dotls;
1399	delete $self->{_wbio};	1995
1400	delete $self->{_tls_wbuf};	1996	# # we don't give a shit. no, we do, but we can't. no...#d#
1401	delete $self->{filter_r};	1997	# # we, we... have to use openssl :/#d#
1402	delete $self->{filter_w};	1998	# &_freetls;#d#
		1999	}
		2000	}
		2001
		2002	sub _freetls {
		2003	my ($self) = @_;
		2004
		2005	return unless $self->{tls};
		2006
		2007	$self->{tls_ctx}->_put_session (delete $self->{tls})
		2008	if $self->{tls} > 0;
		2009
		2010	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
1403	}	2011	}
1404		2012
1405	sub DESTROY {	2013	sub DESTROY {
1406	my $self = shift;	2014	my ($self) = @_;
1407		2015
1408	$self->stoptls;	2016	&_freetls;
1409		2017
1410	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	2018	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1411		2019
1412	if ($linger && length $self->{wbuf}) {	2020	if ($linger && length $self->{wbuf} && $self->{fh}) {
1413	my $fh = delete $self->{fh};	2021	my $fh = delete $self->{fh};
1414	my $wbuf = delete $self->{wbuf};	2022	my $wbuf = delete $self->{wbuf};
1415		2023
1416	my @linger;	2024	my @linger;
1417		2025
1418	push @linger, AnyEvent->io (fh => $fh, poll => "w", cb => sub {	2026	push @linger, AE::io $fh, 1, sub {
1419	my $len = syswrite $fh, $wbuf, length $wbuf;	2027	my $len = syswrite $fh, $wbuf, length $wbuf;
1420		2028
1421	if ($len > 0) {	2029	if ($len > 0) {
1422	substr $wbuf, 0, $len, "";	2030	substr $wbuf, 0, $len, "";
1423	} else {	2031	} elsif (defined $len || ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK)) {
1424	@linger = (); # end	2032	@linger = (); # end
1425	}	2033	}
1426	});	2034	};
1427	push @linger, AnyEvent->timer (after => $linger, cb => sub {	2035	push @linger, AE::timer $linger, 0, sub {
1428	@linger = ();	2036	@linger = ();
1429	});	2037	};
1430	}	2038	}
1431	}	2039	}
		2040
		2041	=item $handle->destroy
		2042
		2043	Shuts down the handle object as much as possible - this call ensures that
		2044	no further callbacks will be invoked and as many resources as possible
		2045	will be freed. Any method you will call on the handle object after
		2046	destroying it in this way will be silently ignored (and it will return the
		2047	empty list).
		2048
		2049	Normally, you can just "forget" any references to an AnyEvent::Handle
		2050	object and it will simply shut down. This works in fatal error and EOF
		2051	callbacks, as well as code outside. It does I<NOT> work in a read or write
		2052	callback, so when you want to destroy the AnyEvent::Handle object from
		2053	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		2054	that case.
		2055
		2056	Destroying the handle object in this way has the advantage that callbacks
		2057	will be removed as well, so if those are the only reference holders (as
		2058	is common), then one doesn't need to do anything special to break any
		2059	reference cycles.
		2060
		2061	The handle might still linger in the background and write out remaining
		2062	data, as specified by the C<linger> option, however.
		2063
		2064	=cut
		2065
		2066	sub destroy {
		2067	my ($self) = @_;
		2068
		2069	$self->DESTROY;
		2070	%$self = ();
		2071	bless $self, "AnyEvent::Handle::destroyed";
		2072	}
		2073
		2074	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		2075	#nop
		2076	}
		2077
		2078	=item $handle->destroyed
		2079
		2080	Returns false as long as the handle hasn't been destroyed by a call to C<<
		2081	->destroy >>, true otherwise.
		2082
		2083	Can be useful to decide whether the handle is still valid after some
		2084	callback possibly destroyed the handle. For example, C<< ->push_write >>,
		2085	C<< ->starttls >> and other methods can call user callbacks, which in turn
		2086	can destroy the handle, so work can be avoided by checking sometimes:
		2087
		2088	$hdl->starttls ("accept");
		2089	return if $hdl->destroyed;
		2090	$hdl->push_write (...
		2091
		2092	Note that the call to C<push_write> will silently be ignored if the handle
		2093	has been destroyed, so often you can just ignore the possibility of the
		2094	handle being destroyed.
		2095
		2096	=cut
		2097
		2098	sub destroyed { 0 }
		2099	sub AnyEvent::Handle::destroyed::destroyed { 1 }
1432		2100
1433	=item AnyEvent::Handle::TLS_CTX	2101	=item AnyEvent::Handle::TLS_CTX
1434		2102
1435	This function creates and returns the Net::SSLeay::CTX object used by	2103	This function creates and returns the AnyEvent::TLS object used by default
1436	default for TLS mode.	2104	for TLS mode.
1437		2105
1438	The context is created like this:	2106	The context is created by calling L<AnyEvent::TLS> without any arguments.
1439
1440	Net::SSLeay::load_error_strings;
1441	Net::SSLeay::SSLeay_add_ssl_algorithms;
1442	Net::SSLeay::randomize;
1443
1444	my $CTX = Net::SSLeay::CTX_new;
1445
1446	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1447		2107
1448	=cut	2108	=cut
1449		2109
1450	our $TLS_CTX;	2110	our $TLS_CTX;
1451		2111
1452	sub TLS_CTX() {	2112	sub TLS_CTX() {
1453	$TLS_CTX || do {	2113	$TLS_CTX ||= do {
1454	require Net::SSLeay;	2114	require AnyEvent::TLS;
1455		2115
1456	Net::SSLeay::load_error_strings ();	2116	new AnyEvent::TLS
1457	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1458	Net::SSLeay::randomize ();
1459
1460	$TLS_CTX = Net::SSLeay::CTX_new ();
1461
1462	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1463
1464	$TLS_CTX
1465	}	2117	}
1466	}	2118	}
1467		2119
1468	=back	2120	=back
		2121
		2122
		2123	=head1 NONFREQUENTLY ASKED QUESTIONS
		2124
		2125	=over 4
		2126
		2127	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		2128	still get further invocations!
		2129
		2130	That's because AnyEvent::Handle keeps a reference to itself when handling
		2131	read or write callbacks.
		2132
		2133	It is only safe to "forget" the reference inside EOF or error callbacks,
		2134	from within all other callbacks, you need to explicitly call the C<<
		2135	->destroy >> method.
		2136
		2137	=item I get different callback invocations in TLS mode/Why can't I pause
		2138	reading?
		2139
		2140	Unlike, say, TCP, TLS connections do not consist of two independent
		2141	communication channels, one for each direction. Or put differently, the
		2142	read and write directions are not independent of each other: you cannot
		2143	write data unless you are also prepared to read, and vice versa.
		2144
		2145	This means that, in TLS mode, you might get C<on_error> or C<on_eof>
		2146	callback invocations when you are not expecting any read data - the reason
		2147	is that AnyEvent::Handle always reads in TLS mode.
		2148
		2149	During the connection, you have to make sure that you always have a
		2150	non-empty read-queue, or an C<on_read> watcher. At the end of the
		2151	connection (or when you no longer want to use it) you can call the
		2152	C<destroy> method.
		2153
		2154	=item How do I read data until the other side closes the connection?
		2155
		2156	If you just want to read your data into a perl scalar, the easiest way
		2157	to achieve this is by setting an C<on_read> callback that does nothing,
		2158	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		2159	will be in C<$_[0]{rbuf}>:
		2160
		2161	$handle->on_read (sub { });
		2162	$handle->on_eof (undef);
		2163	$handle->on_error (sub {
		2164	my $data = delete $_[0]{rbuf};
		2165	});
		2166
		2167	The reason to use C<on_error> is that TCP connections, due to latencies
		2168	and packets loss, might get closed quite violently with an error, when in
		2169	fact all data has been received.
		2170
		2171	It is usually better to use acknowledgements when transferring data,
		2172	to make sure the other side hasn't just died and you got the data
		2173	intact. This is also one reason why so many internet protocols have an
		2174	explicit QUIT command.
		2175
		2176	=item I don't want to destroy the handle too early - how do I wait until
		2177	all data has been written?
		2178
		2179	After writing your last bits of data, set the C<on_drain> callback
		2180	and destroy the handle in there - with the default setting of
		2181	C<low_water_mark> this will be called precisely when all data has been
		2182	written to the socket:
		2183
		2184	$handle->push_write (...);
		2185	$handle->on_drain (sub {
		2186	warn "all data submitted to the kernel\n";
		2187	undef $handle;
		2188	});
		2189
		2190	If you just want to queue some data and then signal EOF to the other side,
		2191	consider using C<< ->push_shutdown >> instead.
		2192
		2193	=item I want to contact a TLS/SSL server, I don't care about security.
		2194
		2195	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		2196	connect to it and then create the AnyEvent::Handle with the C<tls>
		2197	parameter:
		2198
		2199	tcp_connect $host, $port, sub {
		2200	my ($fh) = @_;
		2201
		2202	my $handle = new AnyEvent::Handle
		2203	fh => $fh,
		2204	tls => "connect",
		2205	on_error => sub { ... };
		2206
		2207	$handle->push_write (...);
		2208	};
		2209
		2210	=item I want to contact a TLS/SSL server, I do care about security.
		2211
		2212	Then you should additionally enable certificate verification, including
		2213	peername verification, if the protocol you use supports it (see
		2214	L<AnyEvent::TLS>, C<verify_peername>).
		2215
		2216	E.g. for HTTPS:
		2217
		2218	tcp_connect $host, $port, sub {
		2219	my ($fh) = @_;
		2220
		2221	my $handle = new AnyEvent::Handle
		2222	fh => $fh,
		2223	peername => $host,
		2224	tls => "connect",
		2225	tls_ctx => { verify => 1, verify_peername => "https" },
		2226	...
		2227
		2228	Note that you must specify the hostname you connected to (or whatever
		2229	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2230	peername verification will be done.
		2231
		2232	The above will use the system-dependent default set of trusted CA
		2233	certificates. If you want to check against a specific CA, add the
		2234	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2235
		2236	tls_ctx => {
		2237	verify => 1,
		2238	verify_peername => "https",
		2239	ca_file => "my-ca-cert.pem",
		2240	},
		2241
		2242	=item I want to create a TLS/SSL server, how do I do that?
		2243
		2244	Well, you first need to get a server certificate and key. You have
		2245	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2246	self-signed certificate (cheap. check the search engine of your choice,
		2247	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2248	nice program for that purpose).
		2249
		2250	Then create a file with your private key (in PEM format, see
		2251	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2252	file should then look like this:
		2253
		2254	-----BEGIN RSA PRIVATE KEY-----
		2255	...header data
		2256	... lots of base64'y-stuff
		2257	-----END RSA PRIVATE KEY-----
		2258
		2259	-----BEGIN CERTIFICATE-----
		2260	... lots of base64'y-stuff
		2261	-----END CERTIFICATE-----
		2262
		2263	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2264	specify this file as C<cert_file>:
		2265
		2266	tcp_server undef, $port, sub {
		2267	my ($fh) = @_;
		2268
		2269	my $handle = new AnyEvent::Handle
		2270	fh => $fh,
		2271	tls => "accept",
		2272	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2273	...
		2274
		2275	When you have intermediate CA certificates that your clients might not
		2276	know about, just append them to the C<cert_file>.
		2277
		2278	=back
		2279
1469		2280
1470	=head1 SUBCLASSING AnyEvent::Handle	2281	=head1 SUBCLASSING AnyEvent::Handle
1471		2282
1472	In many cases, you might want to subclass AnyEvent::Handle.	2283	In many cases, you might want to subclass AnyEvent::Handle.
1473		2284
…		…
1490		2301
1491	=item * all members not documented here and not prefixed with an underscore	2302	=item * all members not documented here and not prefixed with an underscore
1492	are free to use in subclasses.	2303	are free to use in subclasses.
1493		2304
1494	Of course, new versions of AnyEvent::Handle may introduce more "public"	2305	Of course, new versions of AnyEvent::Handle may introduce more "public"
1495	member variables, but thats just life, at least it is documented.	2306	member variables, but that's just life. At least it is documented.
1496		2307
1497	=back	2308	=back
1498		2309
1499	=head1 AUTHOR	2310	=head1 AUTHOR
1500		2311

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines