[ViewVC] Diff of: cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.91 by root, Wed Oct 1 07:40:39 2008 UTC vs.
Revision 1.134 by root, Fri Jul 3 00:09:04 2009 UTC

…		…
14		14
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16		16
17	=cut	17	=cut
18		18
19	our $VERSION = 4.3;	19	our $VERSION = 4.45;
20		20
21	=head1 SYNOPSIS	21	=head1 SYNOPSIS
22		22
23	use AnyEvent;	23	use AnyEvent;
24	use AnyEvent::Handle;	24	use AnyEvent::Handle;
…		…
27		27
28	my $handle =	28	my $handle =
29	AnyEvent::Handle->new (	29	AnyEvent::Handle->new (
30	fh => \*STDIN,	30	fh => \*STDIN,
31	on_eof => sub {	31	on_eof => sub {
32	$cv->broadcast;	32	$cv->send;
33	},	33	},
34	);	34	);
35		35
36	# send some request line	36	# send some request line
37	$handle->push_write ("getinfo\015\012");	37	$handle->push_write ("getinfo\015\012");
…		…
59	treatment of characters applies to this module as well.	59	treatment of characters applies to this module as well.
60		60
61	All callbacks will be invoked with the handle object as their first	61	All callbacks will be invoked with the handle object as their first
62	argument.	62	argument.
63		63
64	=head2 SIGPIPE is not handled by this module
65
66	SIGPIPE is not handled by this module, so one of the practical
67	requirements of using it is to ignore SIGPIPE (C<$SIG{PIPE} =
68	'IGNORE'>). At least, this is highly recommend in a networked program: If
69	you use AnyEvent::Handle in a filter program (like sort), exiting on
70	SIGPIPE is probably the right thing to do.
71
72	=head1 METHODS	64	=head1 METHODS
73		65
74	=over 4	66	=over 4
75		67
76	=item B<new (%args)>	68	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
77		69
78	The constructor supports these arguments (all as key => value pairs).	70	The constructor supports these arguments (all as C<< key => value >> pairs).
79		71
80	=over 4	72	=over 4
81		73
82	=item fh => $filehandle [MANDATORY]	74	=item fh => $filehandle [MANDATORY]
83		75
…		…
92	Set the callback to be called when an end-of-file condition is detected,	84	Set the callback to be called when an end-of-file condition is detected,
93	i.e. in the case of a socket, when the other side has closed the	85	i.e. in the case of a socket, when the other side has closed the
94	connection cleanly.	86	connection cleanly.
95		87
96	For sockets, this just means that the other side has stopped sending data,	88	For sockets, this just means that the other side has stopped sending data,
97	you can still try to write data, and, in fact, one can return from the eof	89	you can still try to write data, and, in fact, one can return from the EOF
98	callback and continue writing data, as only the read part has been shut	90	callback and continue writing data, as only the read part has been shut
99	down.	91	down.
100		92
101	While not mandatory, it is I<highly> recommended to set an eof callback,	93	While not mandatory, it is I<highly> recommended to set an EOF callback,
102	otherwise you might end up with a closed socket while you are still	94	otherwise you might end up with a closed socket while you are still
103	waiting for data.	95	waiting for data.
104		96
105	If an EOF condition has been detected but no C<on_eof> callback has been	97	If an EOF condition has been detected but no C<on_eof> callback has been
106	set, then a fatal error will be raised with C<$!> set to <0>.	98	set, then a fatal error will be raised with C<$!> set to <0>.
107		99
108	=item on_error => $cb->($handle, $fatal)	100	=item on_error => $cb->($handle, $fatal, $message)
109		101
110	This is the error callback, which is called when, well, some error	102	This is the error callback, which is called when, well, some error
111	occured, such as not being able to resolve the hostname, failure to	103	occured, such as not being able to resolve the hostname, failure to
112	connect or a read error.	104	connect or a read error.
113		105
…		…
115	fatal errors the handle object will be shut down and will not be usable	107	fatal errors the handle object will be shut down and will not be usable
116	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal	108	(but you are free to look at the current C<< ->rbuf >>). Examples of fatal
117	errors are an EOF condition with active (but unsatisifable) read watchers	109	errors are an EOF condition with active (but unsatisifable) read watchers
118	(C<EPIPE>) or I/O errors.	110	(C<EPIPE>) or I/O errors.
119		111
		112	AnyEvent::Handle tries to find an appropriate error code for you to check
		113	against, but in some cases (TLS errors), this does not work well. It is
		114	recommended to always output the C<$message> argument in human-readable
		115	error messages (it's usually the same as C<"$!">).
		116
120	Non-fatal errors can be retried by simply returning, but it is recommended	117	Non-fatal errors can be retried by simply returning, but it is recommended
121	to simply ignore this parameter and instead abondon the handle object	118	to simply ignore this parameter and instead abondon the handle object
122	when this callback is invoked. Examples of non-fatal errors are timeouts	119	when this callback is invoked. Examples of non-fatal errors are timeouts
123	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).	120	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
124		121
125	On callback entrance, the value of C<$!> contains the operating system	122	On callback entrance, the value of C<$!> contains the operating system
126	error (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT> or C<EBADMSG>).	123	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		124	C<EPROTO>).
127		125
128	While not mandatory, it is I<highly> recommended to set this callback, as	126	While not mandatory, it is I<highly> recommended to set this callback, as
129	you will not be notified of errors otherwise. The default simply calls	127	you will not be notified of errors otherwise. The default simply calls
130	C<croak>.	128	C<croak>.
131		129
…		…
135	and no read request is in the queue (unlike read queue callbacks, this	133	and no read request is in the queue (unlike read queue callbacks, this
136	callback will only be called when at least one octet of data is in the	134	callback will only be called when at least one octet of data is in the
137	read buffer).	135	read buffer).
138		136
139	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	137	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
140	method or access the C<$handle->{rbuf}> member directly.	138	method or access the C<$handle->{rbuf}> member directly. Note that you
		139	must not enlarge or modify the read buffer, you can only remove data at
		140	the beginning from it.
141		141
142	When an EOF condition is detected then AnyEvent::Handle will first try to	142	When an EOF condition is detected then AnyEvent::Handle will first try to
143	feed all the remaining data to the queued callbacks and C<on_read> before	143	feed all the remaining data to the queued callbacks and C<on_read> before
144	calling the C<on_eof> callback. If no progress can be made, then a fatal	144	calling the C<on_eof> callback. If no progress can be made, then a fatal
145	error will be raised (with C<$!> set to C<EPIPE>).	145	error will be raised (with C<$!> set to C<EPIPE>).
…		…
240	write data and will install a watcher that will write this data to the	240	write data and will install a watcher that will write this data to the
241	socket. No errors will be reported (this mostly matches how the operating	241	socket. No errors will be reported (this mostly matches how the operating
242	system treats outstanding data at socket close time).	242	system treats outstanding data at socket close time).
243		243
244	This will not work for partial TLS data that could not be encoded	244	This will not work for partial TLS data that could not be encoded
245	yet. This data will be lost.	245	yet. This data will be lost. Calling the C<stoptls> method in time might
		246	help.
		247
		248	=item peername => $string
		249
		250	A string used to identify the remote site - usually the DNS hostname
		251	(I<not> IDN!) used to create the connection, rarely the IP address.
		252
		253	Apart from being useful in error messages, this string is also used in TLS
		254	common name verification (see C<verify_cn> in L<AnyEvent::TLS>).
246		255
247	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object	256	=item tls => "accept" \| "connect" \| Net::SSLeay::SSL object
248		257
249	When this parameter is given, it enables TLS (SSL) mode, that means	258	When this parameter is given, it enables TLS (SSL) mode, that means
250	AnyEvent will start a TLS handshake as soon as the conenction has been	259	AnyEvent will start a TLS handshake as soon as the conenction has been
251	established and will transparently encrypt/decrypt data afterwards.	260	established and will transparently encrypt/decrypt data afterwards.
		261
		262	All TLS protocol errors will be signalled as C<EPROTO>, with an
		263	appropriate error message.
252		264
253	TLS mode requires Net::SSLeay to be installed (it will be loaded	265	TLS mode requires Net::SSLeay to be installed (it will be loaded
254	automatically when you try to create a TLS handle): this module doesn't	266	automatically when you try to create a TLS handle): this module doesn't
255	have a dependency on that module, so if your module requires it, you have	267	have a dependency on that module, so if your module requires it, you have
256	to add the dependency yourself.	268	to add the dependency yourself.
…		…
260	mode.	272	mode.
261		273
262	You can also provide your own TLS connection object, but you have	274	You can also provide your own TLS connection object, but you have
263	to make sure that you call either C<Net::SSLeay::set_connect_state>	275	to make sure that you call either C<Net::SSLeay::set_connect_state>
264	or C<Net::SSLeay::set_accept_state> on it before you pass it to	276	or C<Net::SSLeay::set_accept_state> on it before you pass it to
265	AnyEvent::Handle.	277	AnyEvent::Handle. Also, this module will take ownership of this connection
		278	object.
		279
		280	At some future point, AnyEvent::Handle might switch to another TLS
		281	implementation, then the option to use your own session object will go
		282	away.
		283
		284	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		285	passing in the wrong integer will lead to certain crash. This most often
		286	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		287	segmentation fault.
266		288
267	See the C<< ->starttls >> method for when need to start TLS negotiation later.	289	See the C<< ->starttls >> method for when need to start TLS negotiation later.
268		290
269	=item tls_ctx => $ssl_ctx	291	=item tls_ctx => $anyevent_tls
270		292
271	Use the given C<Net::SSLeay::CTX> object to create the new TLS connection	293	Use the given C<AnyEvent::TLS> object to create the new TLS connection
272	(unless a connection object was specified directly). If this parameter is	294	(unless a connection object was specified directly). If this parameter is
273	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	295	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
		296
		297	Instead of an object, you can also specify a hash reference with C<< key
		298	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		299	new TLS context object.
274		300
275	=item json => JSON or JSON::XS object	301	=item json => JSON or JSON::XS object
276		302
277	This is the json coder object used by the C<json> read and write types.	303	This is the json coder object used by the C<json> read and write types.
278		304
…		…
281	texts.	307	texts.
282		308
283	Note that you are responsible to depend on the JSON module if you want to	309	Note that you are responsible to depend on the JSON module if you want to
284	use this functionality, as AnyEvent does not have a dependency itself.	310	use this functionality, as AnyEvent does not have a dependency itself.
285		311
286	=item filter_r => $cb
287
288	=item filter_w => $cb
289
290	These exist, but are undocumented at this time. (They are used internally
291	by the TLS code).
292
293	=back	312	=back
294		313
295	=cut	314	=cut
296		315
297	sub new {	316	sub new {
298	my $class = shift;	317	my $class = shift;
299
300	my $self = bless { @_ }, $class;	318	my $self = bless { @_ }, $class;
301		319
302	$self->{fh} or Carp::croak "mandatory argument fh is missing";	320	$self->{fh} or Carp::croak "mandatory argument fh is missing";
303		321
304	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	322	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
305
306	if ($self->{tls}) {
307	require Net::SSLeay;
308	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});
309	}
310		323
311	$self->{_activity} = AnyEvent->now;	324	$self->{_activity} = AnyEvent->now;
312	$self->_timeout;	325	$self->_timeout;
313		326
		327	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
		328
		329	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
		330	if $self->{tls};
		331
314	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};	332	$self->on_drain (delete $self->{on_drain}) if exists $self->{on_drain};
315	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
316		333
317	$self->start_read	334	$self->start_read
318	if $self->{on_read};	335	if $self->{on_read};
319		336
320	$self	337	$self->{fh} && $self
321	}	338	}
322		339
323	sub _shutdown {	340	sub _shutdown {
324	my ($self) = @_;	341	my ($self) = @_;
325		342
326	delete $self->{_tw};	343	delete @$self{qw(_tw _rw _ww fh wbuf on_read _queue)};
327	delete $self->{_rw};	344	$self->{_eof} = 1; # tell starttls et. al to stop trying
328	delete $self->{_ww};
329	delete $self->{fh};
330		345
331	$self->stoptls;	346	&_freetls;
332
333	delete $self->{on_read};
334	delete $self->{_queue};
335	}	347	}
336		348
337	sub _error {	349	sub _error {
338	my ($self, $errno, $fatal) = @_;	350	my ($self, $errno, $fatal, $message) = @_;
339		351
340	$self->_shutdown	352	$self->_shutdown
341	if $fatal;	353	if $fatal;
342		354
343	$! = $errno;	355	$! = $errno;
		356	$message \|\|= "$!";
344		357
345	if ($self->{on_error}) {	358	if ($self->{on_error}) {
346	$self->{on_error}($self, $fatal);	359	$self->{on_error}($self, $fatal, $message);
347	} else {	360	} elsif ($self->{fh}) {
348	Carp::croak "AnyEvent::Handle uncaught error: $!";	361	Carp::croak "AnyEvent::Handle uncaught error: $message";
349	}	362	}
350	}	363	}
351		364
352	=item $fh = $handle->fh	365	=item $fh = $handle->fh
353		366
…		…
390	}	403	}
391		404
392	=item $handle->autocork ($boolean)	405	=item $handle->autocork ($boolean)
393		406
394	Enables or disables the current autocork behaviour (see C<autocork>	407	Enables or disables the current autocork behaviour (see C<autocork>
395	constructor argument).	408	constructor argument). Changes will only take effect on the next write.
396		409
397	=cut	410	=cut
		411
		412	sub autocork {
		413	$_[0]{autocork} = $_[1];
		414	}
398		415
399	=item $handle->no_delay ($boolean)	416	=item $handle->no_delay ($boolean)
400		417
401	Enables or disables the C<no_delay> setting (see constructor argument of	418	Enables or disables the C<no_delay> setting (see constructor argument of
402	the same name for details).	419	the same name for details).
…		…
495	my ($self, $cb) = @_;	512	my ($self, $cb) = @_;
496		513
497	$self->{on_drain} = $cb;	514	$self->{on_drain} = $cb;
498		515
499	$cb->($self)	516	$cb->($self)
500	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	517	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
501	}	518	}
502		519
503	=item $handle->push_write ($data)	520	=item $handle->push_write ($data)
504		521
505	Queues the given scalar to be written. You can push as much data as you	522	Queues the given scalar to be written. You can push as much data as you
…		…
522	substr $self->{wbuf}, 0, $len, "";	539	substr $self->{wbuf}, 0, $len, "";
523		540
524	$self->{_activity} = AnyEvent->now;	541	$self->{_activity} = AnyEvent->now;
525		542
526	$self->{on_drain}($self)	543	$self->{on_drain}($self)
527	if $self->{low_water_mark} >= length $self->{wbuf}	544	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
528	&& $self->{on_drain};	545	&& $self->{on_drain};
529		546
530	delete $self->{_ww} unless length $self->{wbuf};	547	delete $self->{_ww} unless length $self->{wbuf};
531	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {	548	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
532	$self->_error ($!, 1);	549	$self->_error ($!, 1);
…		…
556		573
557	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	574	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
558	->($self, @_);	575	->($self, @_);
559	}	576	}
560		577
561	if ($self->{filter_w}) {	578	if ($self->{tls}) {
562	$self->{filter_w}($self, \$_[0]);	579	$self->{_tls_wbuf} .= $_[0];
		580
		581	&_dotls ($self);
563	} else {	582	} else {
564	$self->{wbuf} .= $_[0];	583	$self->{wbuf} .= $_[0];
565	$self->_drain_wbuf;	584	$self->_drain_wbuf;
566	}	585	}
567	}	586	}
…		…
584	=cut	603	=cut
585		604
586	register_write_type netstring => sub {	605	register_write_type netstring => sub {
587	my ($self, $string) = @_;	606	my ($self, $string) = @_;
588		607
589	sprintf "%d:%s,", (length $string), $string	608	(length $string) . ":$string,"
590	};	609	};
591		610
592	=item packstring => $format, $data	611	=item packstring => $format, $data
593		612
594	An octet string prefixed with an encoded length. The encoding C<$format>	613	An octet string prefixed with an encoded length. The encoding C<$format>
…		…
659		678
660	pack "w/a*", Storable::nfreeze ($ref)	679	pack "w/a*", Storable::nfreeze ($ref)
661	};	680	};
662		681
663	=back	682	=back
		683
		684	=item $handle->push_shutdown
		685
		686	Sometimes you know you want to close the socket after writing your data
		687	before it was actually written. One way to do that is to replace your
		688	C<on_drain> handler by a callback that shuts down the socket. This method
		689	is a shorthand for just that, and replaces the C<on_drain> callback with:
		690
		691	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		692
		693	This simply shuts down the write side and signals an EOF condition to the
		694	the peer.
		695
		696	You can rely on the normal read queue and C<on_eof> handling
		697	afterwards. This is the cleanest way to close a connection.
		698
		699	=cut
		700
		701	sub push_shutdown {
		702	$_[0]->{on_drain} = sub { shutdown $_[0]{fh}, 1 };
		703	}
664		704
665	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)	705	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
666		706
667	This function (not method) lets you add your own types to C<push_write>.	707	This function (not method) lets you add your own types to C<push_write>.
668	Whenever the given C<type> is used, C<push_write> will invoke the code	708	Whenever the given C<type> is used, C<push_write> will invoke the code
…		…
772	) {	812	) {
773	$self->_error (&Errno::ENOSPC, 1), return;	813	$self->_error (&Errno::ENOSPC, 1), return;
774	}	814	}
775		815
776	while () {	816	while () {
		817	# we need to use a separate tls read buffer, as we must not receive data while
		818	# we are draining the buffer, and this can only happen with TLS.
		819	$self->{rbuf} .= delete $self->{_tls_rbuf} if exists $self->{_tls_rbuf};
		820
777	my $len = length $self->{rbuf};	821	my $len = length $self->{rbuf};
778		822
779	if (my $cb = shift @{ $self->{_queue} }) {	823	if (my $cb = shift @{ $self->{_queue} }) {
780	unless ($cb->($self)) {	824	unless ($cb->($self)) {
781	if ($self->{_eof}) {	825	if ($self->{_eof}) {
…		…
803		847
804	last; # more data might arrive	848	last; # more data might arrive
805	}	849	}
806	} else {	850	} else {
807	# read side becomes idle	851	# read side becomes idle
808	delete $self->{_rw};	852	delete $self->{_rw} unless $self->{tls};
809	last;	853	last;
810	}	854	}
811	}	855	}
812		856
813	if ($self->{_eof}) {	857	if ($self->{_eof}) {
…		…
842		886
843	=item $handle->rbuf	887	=item $handle->rbuf
844		888
845	Returns the read buffer (as a modifiable lvalue).	889	Returns the read buffer (as a modifiable lvalue).
846		890
847	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	891	You can access the read buffer directly as the C<< ->{rbuf} >>
848	you want.	892	member, if you want. However, the only operation allowed on the
		893	read buffer (apart from looking at it) is removing data from its
		894	beginning. Otherwise modifying or appending to it is not allowed and will
		895	lead to hard-to-track-down bugs.
849		896
850	NOTE: The read buffer should only be used or modified if the C<on_read>,	897	NOTE: The read buffer should only be used or modified if the C<on_read>,
851	C<push_read> or C<unshift_read> methods are used. The other read methods	898	C<push_read> or C<unshift_read> methods are used. The other read methods
852	automatically manage the read buffer.	899	automatically manage the read buffer.
853		900
…		…
1108	An octet string prefixed with an encoded length. The encoding C<$format>	1155	An octet string prefixed with an encoded length. The encoding C<$format>
1109	uses the same format as a Perl C<pack> format, but must specify a single	1156	uses the same format as a Perl C<pack> format, but must specify a single
1110	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an	1157	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
1111	optional C<!>, C<< < >> or C<< > >> modifier).	1158	optional C<!>, C<< < >> or C<< > >> modifier).
1112		1159
1113	DNS over TCP uses a prefix of C<n>, EPP uses a prefix of C<N>.	1160	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1161	EPP uses a prefix of C<N> (4 octtes).
1114		1162
1115	Example: read a block of data prefixed by its length in BER-encoded	1163	Example: read a block of data prefixed by its length in BER-encoded
1116	format (very efficient).	1164	format (very efficient).
1117		1165
1118	$handle->push_read (packstring => "w", sub {	1166	$handle->push_read (packstring => "w", sub {
…		…
1148	}	1196	}
1149	};	1197	};
1150		1198
1151	=item json => $cb->($handle, $hash_or_arrayref)	1199	=item json => $cb->($handle, $hash_or_arrayref)
1152		1200
1153	Reads a JSON object or array, decodes it and passes it to the callback.	1201	Reads a JSON object or array, decodes it and passes it to the
		1202	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
1154		1203
1155	If a C<json> object was passed to the constructor, then that will be used	1204	If a C<json> object was passed to the constructor, then that will be used
1156	for the final decode, otherwise it will create a JSON coder expecting UTF-8.	1205	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
1157		1206
1158	This read type uses the incremental parser available with JSON version	1207	This read type uses the incremental parser available with JSON version
…		…
1175	my $rbuf = \$self->{rbuf};	1224	my $rbuf = \$self->{rbuf};
1176		1225
1177	my $json = $self->{json} \|\|= JSON->new->utf8;	1226	my $json = $self->{json} \|\|= JSON->new->utf8;
1178		1227
1179	sub {	1228	sub {
1180	my $ref = $json->incr_parse ($self->{rbuf});	1229	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
1181		1230
1182	if ($ref) {	1231	if ($ref) {
1183	$self->{rbuf} = $json->incr_text;	1232	$self->{rbuf} = $json->incr_text;
1184	$json->incr_text = "";	1233	$json->incr_text = "";
1185	$cb->($self, $ref);	1234	$cb->($self, $ref);
1186		1235
1187	1	1236	1
		1237	} elsif ($@) {
		1238	# error case
		1239	$json->incr_skip;
		1240
		1241	$self->{rbuf} = $json->incr_text;
		1242	$json->incr_text = "";
		1243
		1244	$self->_error (&Errno::EBADMSG);
		1245
		1246	()
1188	} else {	1247	} else {
1189	$self->{rbuf} = "";	1248	$self->{rbuf} = "";
		1249
1190	()	1250	()
1191	}	1251	}
1192	}	1252	}
1193	};	1253	};
1194		1254
…		…
1271	Note that AnyEvent::Handle will automatically C<start_read> for you when	1331	Note that AnyEvent::Handle will automatically C<start_read> for you when
1272	you change the C<on_read> callback or push/unshift a read callback, and it	1332	you change the C<on_read> callback or push/unshift a read callback, and it
1273	will automatically C<stop_read> for you when neither C<on_read> is set nor	1333	will automatically C<stop_read> for you when neither C<on_read> is set nor
1274	there are any read requests in the queue.	1334	there are any read requests in the queue.
1275		1335
		1336	These methods will have no effect when in TLS mode (as TLS doesn't support
		1337	half-duplex connections).
		1338
1276	=cut	1339	=cut
1277		1340
1278	sub stop_read {	1341	sub stop_read {
1279	my ($self) = @_;	1342	my ($self) = @_;
1280		1343
1281	delete $self->{_rw};	1344	delete $self->{_rw} unless $self->{tls};
1282	}	1345	}
1283		1346
1284	sub start_read {	1347	sub start_read {
1285	my ($self) = @_;	1348	my ($self) = @_;
1286		1349
1287	unless ($self->{_rw} \|\| $self->{_eof}) {	1350	unless ($self->{_rw} \|\| $self->{_eof}) {
1288	Scalar::Util::weaken $self;	1351	Scalar::Util::weaken $self;
1289		1352
1290	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1353	$self->{_rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {
1291	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1354	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
1292	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;	1355	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} \|\| 8192, length $$rbuf;
1293		1356
1294	if ($len > 0) {	1357	if ($len > 0) {
1295	$self->{_activity} = AnyEvent->now;	1358	$self->{_activity} = AnyEvent->now;
1296		1359
1297	$self->{filter_r}	1360	if ($self->{tls}) {
1298	? $self->{filter_r}($self, $rbuf)	1361	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
1299	: $self->{_in_drain} \|\| $self->_drain_rbuf;	1362
		1363	&_dotls ($self);
		1364	} else {
		1365	$self->_drain_rbuf unless $self->{_in_drain};
		1366	}
1300		1367
1301	} elsif (defined $len) {	1368	} elsif (defined $len) {
1302	delete $self->{_rw};	1369	delete $self->{_rw};
1303	$self->{_eof} = 1;	1370	$self->{_eof} = 1;
1304	$self->_drain_rbuf unless $self->{_in_drain};	1371	$self->_drain_rbuf unless $self->{_in_drain};
…		…
1308	}	1375	}
1309	});	1376	});
1310	}	1377	}
1311	}	1378	}
1312		1379
		1380	our $ERROR_SYSCALL;
		1381	our $ERROR_WANT_READ;
		1382	our $ERROR_ZERO_RETURN;
		1383
		1384	sub _tls_error {
		1385	my ($self, $err) = @_;
		1386	warn "$err,$!\n";#d#
		1387
		1388	return $self->_error ($!, 1)
		1389	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1390
		1391	$self->_error (&Errno::EPROTO, 1,
		1392	Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ()));
		1393	}
		1394
		1395	# poll the write BIO and send the data if applicable
		1396	# also decode read data if possible
		1397	# this is basiclaly our TLS state machine
		1398	# more efficient implementations are possible with openssl,
		1399	# but not with the buggy and incomplete Net::SSLeay.
1313	sub _dotls {	1400	sub _dotls {
1314	my ($self) = @_;	1401	my ($self) = @_;
1315		1402
1316	my $buf;	1403	my $tmp;
1317		1404
1318	if (length $self->{_tls_wbuf}) {	1405	if (length $self->{_tls_wbuf}) {
1319	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {	1406	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
1320	substr $self->{_tls_wbuf}, 0, $len, "";	1407	substr $self->{_tls_wbuf}, 0, $tmp, "";
1321	}	1408	}
1322	}
1323		1409
		1410	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1411	return $self->_tls_error ($tmp)
		1412	if $tmp != $ERROR_WANT_READ
		1413	&& ($tmp != $ERROR_SYSCALL \|\| $!)
		1414	&& $tmp != $ERROR_ZERO_RETURN;
		1415	}
		1416
1324	while (defined ($buf = Net::SSLeay::read ($self->{tls}))) {	1417	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
1325	unless (length $buf) {	1418	unless (length $tmp) {
1326	# let's treat SSL-eof as we treat normal EOF	1419	# let's treat SSL-eof as we treat normal EOF
1327	delete $self->{_rw};	1420	delete $self->{_rw};
1328	$self->{_eof} = 1;	1421	$self->{_eof} = 1;
		1422	&_freetls;
1329	}	1423	}
1330		1424
1331	$self->{rbuf} .= $buf;	1425	$self->{_tls_rbuf} .= $tmp;
1332	$self->_drain_rbuf unless $self->{_in_drain};	1426	$self->_drain_rbuf unless $self->{_in_drain};
1333
1334	$self->{tls} or return; # tls could have gone away	1427	$self->{tls} or return; # tls session might have gone away in callback
1335	}	1428	}
1336		1429
1337	my $err = Net::SSLeay::get_error ($self->{tls}, -1);	1430	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
1338
1339	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
1340	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
1341	return $self->_error ($!, 1);	1431	return $self->_tls_error ($tmp)
1342	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {	1432	if $tmp != $ERROR_WANT_READ
1343	return $self->_error (&Errno::EIO, 1);	1433	&& ($tmp != $ERROR_SYSCALL \|\| $!)
1344	}	1434	&& $tmp != $ERROR_ZERO_RETURN;
1345		1435
1346	# all others are fine for our purposes
1347	}
1348
1349	if (length ($buf = Net::SSLeay::BIO_read ($self->{_wbio}))) {	1436	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
1350	$self->{wbuf} .= $buf;	1437	$self->{wbuf} .= $tmp;
1351	$self->_drain_wbuf;	1438	$self->_drain_wbuf;
1352	}	1439	}
1353	}	1440	}
1354		1441
1355	=item $handle->starttls ($tls[, $tls_ctx])	1442	=item $handle->starttls ($tls[, $tls_ctx])
…		…
1359	C<starttls>.	1446	C<starttls>.
1360		1447
1361	The first argument is the same as the C<tls> constructor argument (either	1448	The first argument is the same as the C<tls> constructor argument (either
1362	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1449	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
1363		1450
1364	The second argument is the optional C<Net::SSLeay::CTX> object that is	1451	The second argument is the optional C<AnyEvent::TLS> object that is used
1365	used when AnyEvent::Handle has to create its own TLS connection object.	1452	when AnyEvent::Handle has to create its own TLS connection object, or
		1453	a hash reference with C<< key => value >> pairs that will be used to
		1454	construct a new context.
1366		1455
1367	The TLS connection object will end up in C<< $handle->{tls} >> after this	1456	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
1368	call and can be used or changed to your liking. Note that the handshake	1457	context in C<< $handle->{tls_ctx} >> after this call and can be used or
1369	might have already started when this function returns.	1458	changed to your liking. Note that the handshake might have already started
		1459	when this function returns.
		1460
		1461	If it an error to start a TLS handshake more than once per
		1462	AnyEvent::Handle object (this is due to bugs in OpenSSL).
1370		1463
1371	=cut	1464	=cut
1372		1465
1373	sub starttls {	1466	sub starttls {
1374	my ($self, $ssl, $ctx) = @_;	1467	my ($self, $ssl, $ctx) = @_;
1375		1468
1376	$self->stoptls;	1469	require Net::SSLeay;
1377		1470
1378	if ($ssl eq "accept") {	1471	Carp::croak "it is an error to call starttls more than once on an AnyEvent::Handle object"
1379	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());	1472	if $self->{tls};
1380	Net::SSLeay::set_accept_state ($ssl);	1473
1381	} elsif ($ssl eq "connect") {	1474	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
1382	$ssl = Net::SSLeay::new ($ctx \|\| TLS_CTX ());	1475	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
1383	Net::SSLeay::set_connect_state ($ssl);	1476	$ERROR_ZERO_RETURN = Net::SSLeay::ERROR_ZERO_RETURN ();
		1477
		1478	$ctx \|\|= $self->{tls_ctx};
		1479
		1480	if ("HASH" eq ref $ctx) {
		1481	require AnyEvent::TLS;
		1482
		1483	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context
		1484	$ctx = new AnyEvent::TLS %$ctx;
		1485	}
1384	}	1486
1385		1487	$self->{tls_ctx} = $ctx \|\| TLS_CTX ();
1386	$self->{tls} = $ssl;	1488	$self->{tls} = $ssl = $self->{tls_ctx}->_get_session ($ssl, $self, $self->{peername});
1387		1489
1388	# basically, this is deep magic (because SSL_read should have the same issues)	1490	# basically, this is deep magic (because SSL_read should have the same issues)
1389	# but the openssl maintainers basically said: "trust us, it just works".	1491	# but the openssl maintainers basically said: "trust us, it just works".
1390	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1492	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
1391	# and mismaintained ssleay-module doesn't even offer them).	1493	# and mismaintained ssleay-module doesn't even offer them).
1392	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1494	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
1393	#	1495	#
1394	# in short: this is a mess.	1496	# in short: this is a mess.
1395	#	1497	#
1396	# note that we do not try to kepe the length constant between writes as we are required to do.	1498	# note that we do not try to keep the length constant between writes as we are required to do.
1397	# we assume that most (but not all) of this insanity only applies to non-blocking cases,	1499	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
1398	# and we drive openssl fully in blocking mode here.	1500	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1501	# have identity issues in that area.
1399	Net::SSLeay::CTX_set_mode ($self->{tls},	1502	# Net::SSLeay::CTX_set_mode ($ssl,
1400	(eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)	1503	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } \|\| 1)
1401	\| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));	1504	# \| (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } \|\| 2));
		1505	Net::SSLeay::CTX_set_mode ($ssl, 1\|2);
1402		1506
1403	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1507	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1404	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1508	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
1405		1509
1406	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});	1510	Net::SSLeay::set_bio ($ssl, $self->{_rbio}, $self->{_wbio});
1407		1511
1408	$self->{filter_w} = sub {
1409	$_[0]{_tls_wbuf} .= ${$_[1]};
1410	&_dotls;
1411	};
1412	$self->{filter_r} = sub {
1413	Net::SSLeay::BIO_write ($_[0]{_rbio}, ${$_[1]});
1414	&_dotls;
1415	};
1416
1417	&_dotls; # need to trigger the initial negotiation exchange	1512	&_dotls; # need to trigger the initial handshake
		1513	$self->start_read; # make sure we actually do read
1418	}	1514	}
1419		1515
1420	=item $handle->stoptls	1516	=item $handle->stoptls
1421		1517
1422	Destroys the SSL connection, if any. Partial read or write data will be	1518	Shuts down the SSL connection - this makes a proper EOF handshake by
1423	lost.	1519	sending a close notify to the other side, but since OpenSSL doesn't
		1520	support non-blocking shut downs, it is not possible to re-use the stream
		1521	afterwards.
1424		1522
1425	=cut	1523	=cut
1426		1524
1427	sub stoptls {	1525	sub stoptls {
1428	my ($self) = @_;	1526	my ($self) = @_;
1429		1527
1430	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1528	if ($self->{tls}) {
		1529	Net::SSLeay::shutdown ($self->{tls});
1431		1530
1432	delete $self->{_rbio};	1531	&_dotls;
1433	delete $self->{_wbio};	1532
1434	delete $self->{_tls_wbuf};	1533	# we don't give a shit. no, we do, but we can't. no...
1435	delete $self->{filter_r};	1534	# we, we... have to use openssl :/
1436	delete $self->{filter_w};	1535	&_freetls;
		1536	}
		1537	}
		1538
		1539	sub _freetls {
		1540	my ($self) = @_;
		1541
		1542	return unless $self->{tls};
		1543
		1544	$self->{tls_ctx}->_put_session (delete $self->{tls});
		1545
		1546	delete @$self{qw(_rbio _wbio _tls_wbuf)};
1437	}	1547	}
1438		1548
1439	sub DESTROY {	1549	sub DESTROY {
1440	my $self = shift;	1550	my ($self) = @_;
1441		1551
1442	$self->stoptls;	1552	&_freetls;
1443		1553
1444	my $linger = exists $self->{linger} ? $self->{linger} : 3600;	1554	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
1445		1555
1446	if ($linger && length $self->{wbuf}) {	1556	if ($linger && length $self->{wbuf}) {
1447	my $fh = delete $self->{fh};	1557	my $fh = delete $self->{fh};
…		…
1462	@linger = ();	1572	@linger = ();
1463	});	1573	});
1464	}	1574	}
1465	}	1575	}
1466		1576
		1577	=item $handle->destroy
		1578
		1579	Shuts down the handle object as much as possible - this call ensures that
		1580	no further callbacks will be invoked and resources will be freed as much
		1581	as possible. You must not call any methods on the object afterwards.
		1582
		1583	Normally, you can just "forget" any references to an AnyEvent::Handle
		1584	object and it will simply shut down. This works in fatal error and EOF
		1585	callbacks, as well as code outside. It does I<NOT> work in a read or write
		1586	callback, so when you want to destroy the AnyEvent::Handle object from
		1587	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		1588	that case.
		1589
		1590	The handle might still linger in the background and write out remaining
		1591	data, as specified by the C<linger> option, however.
		1592
		1593	=cut
		1594
		1595	sub destroy {
		1596	my ($self) = @_;
		1597
		1598	$self->DESTROY;
		1599	%$self = ();
		1600	}
		1601
1467	=item AnyEvent::Handle::TLS_CTX	1602	=item AnyEvent::Handle::TLS_CTX
1468		1603
1469	This function creates and returns the Net::SSLeay::CTX object used by	1604	This function creates and returns the AnyEvent::TLS object used by default
1470	default for TLS mode.	1605	for TLS mode.
1471		1606
1472	The context is created like this:	1607	The context is created by calling L<AnyEvent::TLS> without any arguments.
1473
1474	Net::SSLeay::load_error_strings;
1475	Net::SSLeay::SSLeay_add_ssl_algorithms;
1476	Net::SSLeay::randomize;
1477
1478	my $CTX = Net::SSLeay::CTX_new;
1479
1480	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
1481		1608
1482	=cut	1609	=cut
1483		1610
1484	our $TLS_CTX;	1611	our $TLS_CTX;
1485		1612
1486	sub TLS_CTX() {	1613	sub TLS_CTX() {
1487	$TLS_CTX \|\| do {	1614	$TLS_CTX \|\|= do {
1488	require Net::SSLeay;	1615	require AnyEvent::TLS;
1489		1616
1490	Net::SSLeay::load_error_strings ();	1617	new AnyEvent::TLS
1491	Net::SSLeay::SSLeay_add_ssl_algorithms ();
1492	Net::SSLeay::randomize ();
1493
1494	$TLS_CTX = Net::SSLeay::CTX_new ();
1495
1496	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
1497
1498	$TLS_CTX
1499	}	1618	}
1500	}	1619	}
1501		1620
1502	=back	1621	=back
		1622
		1623
		1624	=head1 NONFREQUENTLY ASKED QUESTIONS
		1625
		1626	=over 4
		1627
		1628	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		1629	still get further invocations!
		1630
		1631	That's because AnyEvent::Handle keeps a reference to itself when handling
		1632	read or write callbacks.
		1633
		1634	It is only safe to "forget" the reference inside EOF or error callbacks,
		1635	from within all other callbacks, you need to explicitly call the C<<
		1636	->destroy >> method.
		1637
		1638	=item I get different callback invocations in TLS mode/Why can't I pause
		1639	reading?
		1640
		1641	Unlike, say, TCP, TLS connections do not consist of two independent
		1642	communication channels, one for each direction. Or put differently. The
		1643	read and write directions are not independent of each other: you cannot
		1644	write data unless you are also prepared to read, and vice versa.
		1645
		1646	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		1647	callback invocations when you are not expecting any read data - the reason
		1648	is that AnyEvent::Handle always reads in TLS mode.
		1649
		1650	During the connection, you have to make sure that you always have a
		1651	non-empty read-queue, or an C<on_read> watcher. At the end of the
		1652	connection (or when you no longer want to use it) you can call the
		1653	C<destroy> method.
		1654
		1655	=item How do I read data until the other side closes the connection?
		1656
		1657	If you just want to read your data into a perl scalar, the easiest way
		1658	to achieve this is by setting an C<on_read> callback that does nothing,
		1659	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		1660	will be in C<$_[0]{rbuf}>:
		1661
		1662	$handle->on_read (sub { });
		1663	$handle->on_eof (undef);
		1664	$handle->on_error (sub {
		1665	my $data = delete $_[0]{rbuf};
		1666	undef $handle;
		1667	});
		1668
		1669	The reason to use C<on_error> is that TCP connections, due to latencies
		1670	and packets loss, might get closed quite violently with an error, when in
		1671	fact, all data has been received.
		1672
		1673	It is usually better to use acknowledgements when transferring data,
		1674	to make sure the other side hasn't just died and you got the data
		1675	intact. This is also one reason why so many internet protocols have an
		1676	explicit QUIT command.
		1677
		1678	=item I don't want to destroy the handle too early - how do I wait until
		1679	all data has been written?
		1680
		1681	After writing your last bits of data, set the C<on_drain> callback
		1682	and destroy the handle in there - with the default setting of
		1683	C<low_water_mark> this will be called precisely when all data has been
		1684	written to the socket:
		1685
		1686	$handle->push_write (...);
		1687	$handle->on_drain (sub {
		1688	warn "all data submitted to the kernel\n";
		1689	undef $handle;
		1690	});
		1691
		1692	=back
		1693
1503		1694
1504	=head1 SUBCLASSING AnyEvent::Handle	1695	=head1 SUBCLASSING AnyEvent::Handle
1505		1696
1506	In many cases, you might want to subclass AnyEvent::Handle.	1697	In many cases, you might want to subclass AnyEvent::Handle.
1507		1698

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents): Revision 1.91 by root, Wed Oct 1 07:40:39 2008 UTC vs. Revision 1.134 by root, Fri Jul 3 00:09:04 2009 UTC

Diff Legend

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.91 by root, Wed Oct 1 07:40:39 2008 UTC vs.
Revision 1.134 by root, Fri Jul 3 00:09:04 2009 UTC