ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/AnyEvent/lib/AnyEvent/Handle.pm

Comparing AnyEvent/lib/AnyEvent/Handle.pm (file contents):
Revision 1.29 by root, Sat May 24 23:10:18 2008 UTC vs.
Revision 1.180 by root, Thu Aug 20 22:58:35 2009 UTC

1	package AnyEvent::Handle;
2
3	no warnings;
4	use strict;
5
6	use AnyEvent ();
7	use AnyEvent::Util ();
8	use Scalar::Util ();
9	use Carp ();
10	use Fcntl ();
11	use Errno qw/EAGAIN EINTR/;
12
13	=head1 NAME	1	=head1 NAME
14		2
15	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent	3	AnyEvent::Handle - non-blocking I/O on file handles via AnyEvent
16
17	This module is experimental.
18
19	=cut
20
21	our $VERSION = '0.04';
22		4
23	=head1 SYNOPSIS	5	=head1 SYNOPSIS
24		6
25	use AnyEvent;	7	use AnyEvent;
26	use AnyEvent::Handle;	8	use AnyEvent::Handle;
27		9
28	my $cv = AnyEvent->condvar;	10	my $cv = AnyEvent->condvar;
29		11
30	my $ae_fh = AnyEvent::Handle->new (fh => \*STDIN);	12	my $hdl; $hdl = new AnyEvent::Handle
31
32	#TODO
33
34	# or use the constructor to pass the callback:
35
36	my $ae_fh2 =
37	AnyEvent::Handle->new (
38	fh => \*STDIN,	13	fh => \*STDIN,
39	on_eof => sub {	14	on_error => sub {
40	$cv->broadcast;	15	my ($hdl, $fatal, $msg) = @_;
41	},	16	warn "got error $msg\n";
42	#TODO	17	$hdl->destroy;
		18	$cv->send;
43	);	19	);
44		20
45	$cv->wait;	21	# send some request line
		22	$hdl->push_write ("getinfo\015\012");
		23
		24	# read the response line
		25	$hdl->push_read (line => sub {
		26	my ($hdl, $line) = @_;
		27	warn "got line <$line>\n";
		28	$cv->send;
		29	});
		30
		31	$cv->recv;
46		32
47	=head1 DESCRIPTION	33	=head1 DESCRIPTION
48		34
49	This module is a helper module to make it easier to do event-based I/O on	35	This module is a helper module to make it easier to do event-based I/O on
50	filehandles. For utility functions for doing non-blocking connects and accepts	36	filehandles.
51	on sockets see L<AnyEvent::Util>.	37
		38	The L<AnyEvent::Intro> tutorial contains some well-documented
		39	AnyEvent::Handle examples.
52		40
53	In the following, when the documentation refers to of "bytes" then this	41	In the following, when the documentation refers to of "bytes" then this
54	means characters. As sysread and syswrite are used for all I/O, their	42	means characters. As sysread and syswrite are used for all I/O, their
55	treatment of characters applies to this module as well.	43	treatment of characters applies to this module as well.
56		44
		45	At the very minimum, you should specify C<fh> or C<connect>, and the
		46	C<on_error> callback.
		47
57	All callbacks will be invoked with the handle object as their first	48	All callbacks will be invoked with the handle object as their first
58	argument.	49	argument.
59		50
		51	=cut
		52
		53	package AnyEvent::Handle;
		54
		55	use Scalar::Util ();
		56	use List::Util ();
		57	use Carp ();
		58	use Errno qw(EAGAIN EINTR);
		59
		60	use AnyEvent (); BEGIN { AnyEvent::common_sense }
		61	use AnyEvent::Util qw(WSAEWOULDBLOCK);
		62
		63	our $VERSION = $AnyEvent::VERSION;
		64
60	=head1 METHODS	65	=head1 METHODS
61		66
62	=over 4	67	=over 4
63		68
64	=item B<new (%args)>	69	=item $handle = B<new> AnyEvent::TLS fh => $filehandle, key => value...
65		70
66	The constructor supports these arguments (all as key => value pairs).	71	The constructor supports these arguments (all as C<< key => value >> pairs).
67		72
68	=over 4	73	=over 4
69		74
70	=item fh => $filehandle [MANDATORY]	75	=item fh => $filehandle [C<fh> or C<connect> MANDATORY]
71		76
72	The filehandle this L<AnyEvent::Handle> object will operate on.	77	The filehandle this L<AnyEvent::Handle> object will operate on.
73
74	NOTE: The filehandle will be set to non-blocking (using	78	NOTE: The filehandle will be set to non-blocking mode (using
75	AnyEvent::Util::fh_nonblocking).	79	C<AnyEvent::Util::fh_nonblocking>) by the constructor and needs to stay in
		80	that mode.
76		81
77	=item on_eof => $cb->($self)	82	=item connect => [$host, $service] [C<fh> or C<connect> MANDATORY]
78		83
79	Set the callback to be called on EOF.	84	Try to connect to the specified host and service (port), using
		85	C<AnyEvent::Socket::tcp_connect>. The C<$host> additionally becomes the
		86	default C<peername>.
80		87
81	While not mandatory, it is highly recommended to set an eof callback,	88	You have to specify either this parameter, or C<fh>, above.
82	otherwise you might end up with a closed socket while you are still
83	waiting for data.
84		89
		90	It is possible to push requests on the read and write queues, and modify
		91	properties of the stream, even while AnyEvent::Handle is connecting.
		92
		93	When this parameter is specified, then the C<on_prepare>,
		94	C<on_connect_error> and C<on_connect> callbacks will be called under the
		95	appropriate circumstances:
		96
		97	=over 4
		98
85	=item on_error => $cb->($self)	99	=item on_prepare => $cb->($handle)
86		100
		101	This (rarely used) callback is called before a new connection is
		102	attempted, but after the file handle has been created. It could be used to
		103	prepare the file handle with parameters required for the actual connect
		104	(as opposed to settings that can be changed when the connection is already
		105	established).
		106
		107	The return value of this callback should be the connect timeout value in
		108	seconds (or C<0>, or C<undef>, or the empty list, to indicate the default
		109	timeout is to be used).
		110
		111	=item on_connect => $cb->($handle, $host, $port, $retry->())
		112
		113	This callback is called when a connection has been successfully established.
		114
		115	The actual numeric host and port (the socket peername) are passed as
		116	parameters, together with a retry callback.
		117
		118	When, for some reason, the handle is not acceptable, then calling
		119	C<$retry> will continue with the next conenction target (in case of
		120	multi-homed hosts or SRV records there can be multiple connection
		121	endpoints). When it is called then the read and write queues, eof status,
		122	tls status and similar properties of the handle are being reset.
		123
		124	In most cases, ignoring the C<$retry> parameter is the way to go.
		125
		126	=item on_connect_error => $cb->($handle, $message)
		127
		128	This callback is called when the conenction could not be
		129	established. C<$!> will contain the relevant error code, and C<$message> a
		130	message describing it (usually the same as C<"$!">).
		131
		132	If this callback isn't specified, then C<on_error> will be called with a
		133	fatal error instead.
		134
		135	=back
		136
		137	=item on_error => $cb->($handle, $fatal, $message)
		138
87	This is the fatal error callback, that is called when, well, a fatal error	139	This is the error callback, which is called when, well, some error
88	occurs, such as not being able to resolve the hostname, failure to connect	140	occured, such as not being able to resolve the hostname, failure to
89	or a read error.	141	connect or a read error.
90		142
91	The object will not be in a usable state when this callback has been	143	Some errors are fatal (which is indicated by C<$fatal> being true). On
92	called.	144	fatal errors the handle object will be destroyed (by a call to C<< ->
		145	destroy >>) after invoking the error callback (which means you are free to
		146	examine the handle object). Examples of fatal errors are an EOF condition
		147	with active (but unsatisifable) read watchers (C<EPIPE>) or I/O errors. In
		148	cases where the other side can close the connection at their will it is
		149	often easiest to not report C<EPIPE> errors in this callback.
		150
		151	AnyEvent::Handle tries to find an appropriate error code for you to check
		152	against, but in some cases (TLS errors), this does not work well. It is
		153	recommended to always output the C<$message> argument in human-readable
		154	error messages (it's usually the same as C<"$!">).
		155
		156	Non-fatal errors can be retried by simply returning, but it is recommended
		157	to simply ignore this parameter and instead abondon the handle object
		158	when this callback is invoked. Examples of non-fatal errors are timeouts
		159	C<ETIMEDOUT>) or badly-formatted data (C<EBADMSG>).
93		160
94	On callback entrance, the value of C<$!> contains the operating system	161	On callback entrance, the value of C<$!> contains the operating system
95	error (or C<ENOSPC>, C<EPIPE> or C<EBADMSG>).	162	error code (or C<ENOSPC>, C<EPIPE>, C<ETIMEDOUT>, C<EBADMSG> or
		163	C<EPROTO>).
96		164
97	While not mandatory, it is I<highly> recommended to set this callback, as	165	While not mandatory, it is I<highly> recommended to set this callback, as
98	you will not be notified of errors otherwise. The default simply calls	166	you will not be notified of errors otherwise. The default simply calls
99	die.	167	C<croak>.
100		168
101	=item on_read => $cb->($self)	169	=item on_read => $cb->($handle)
102		170
103	This sets the default read callback, which is called when data arrives	171	This sets the default read callback, which is called when data arrives
104	and no read request is in the queue.	172	and no read request is in the queue (unlike read queue callbacks, this
		173	callback will only be called when at least one octet of data is in the
		174	read buffer).
105		175
106	To access (and remove data from) the read buffer, use the C<< ->rbuf >>	176	To access (and remove data from) the read buffer, use the C<< ->rbuf >>
107	method or access the C<$self->{rbuf}> member directly.	177	method or access the C<< $handle->{rbuf} >> member directly. Note that you
		178	must not enlarge or modify the read buffer, you can only remove data at
		179	the beginning from it.
108		180
109	When an EOF condition is detected then AnyEvent::Handle will first try to	181	When an EOF condition is detected then AnyEvent::Handle will first try to
110	feed all the remaining data to the queued callbacks and C<on_read> before	182	feed all the remaining data to the queued callbacks and C<on_read> before
111	calling the C<on_eof> callback. If no progress can be made, then a fatal	183	calling the C<on_eof> callback. If no progress can be made, then a fatal
112	error will be raised (with C<$!> set to C<EPIPE>).	184	error will be raised (with C<$!> set to C<EPIPE>).
113		185
		186	Note that, unlike requests in the read queue, an C<on_read> callback
		187	doesn't mean you I<require> some data: if there is an EOF and there
		188	are outstanding read requests then an error will be flagged. With an
		189	C<on_read> callback, the C<on_eof> callback will be invoked.
		190
		191	=item on_eof => $cb->($handle)
		192
		193	Set the callback to be called when an end-of-file condition is detected,
		194	i.e. in the case of a socket, when the other side has closed the
		195	connection cleanly, and there are no outstanding read requests in the
		196	queue (if there are read requests, then an EOF counts as an unexpected
		197	connection close and will be flagged as an error).
		198
		199	For sockets, this just means that the other side has stopped sending data,
		200	you can still try to write data, and, in fact, one can return from the EOF
		201	callback and continue writing data, as only the read part has been shut
		202	down.
		203
		204	If an EOF condition has been detected but no C<on_eof> callback has been
		205	set, then a fatal error will be raised with C<$!> set to <0>.
		206
114	=item on_drain => $cb->()	207	=item on_drain => $cb->($handle)
115		208
116	This sets the callback that is called when the write buffer becomes empty	209	This sets the callback that is called when the write buffer becomes empty
117	(or when the callback is set and the buffer is empty already).	210	(or when the callback is set and the buffer is empty already).
118		211
119	To append to the write buffer, use the C<< ->push_write >> method.	212	To append to the write buffer, use the C<< ->push_write >> method.
120		213
		214	This callback is useful when you don't want to put all of your write data
		215	into the queue at once, for example, when you want to write the contents
		216	of some file to the socket you might not want to read the whole file into
		217	memory and push it into the queue, but instead only read more data from
		218	the file when the write queue becomes empty.
		219
		220	=item timeout => $fractional_seconds
		221
		222	=item rtimeout => $fractional_seconds
		223
		224	=item wtimeout => $fractional_seconds
		225
		226	If non-zero, then these enables an "inactivity" timeout: whenever this
		227	many seconds pass without a successful read or write on the underlying
		228	file handle (or a call to C<timeout_reset>), the C<on_timeout> callback
		229	will be invoked (and if that one is missing, a non-fatal C<ETIMEDOUT>
		230	error will be raised).
		231
		232	There are three variants of the timeouts that work fully independent
		233	of each other, for both read and write, just read, and just write:
		234	C<timeout>, C<rtimeout> and C<wtimeout>, with corresponding callbacks
		235	C<on_timeout>, C<on_rtimeout> and C<on_wtimeout>, and reset functions
		236	C<timeout_reset>, C<rtimeout_reset>, and C<wtimeout_reset>.
		237
		238	Note that timeout processing is also active when you currently do not have
		239	any outstanding read or write requests: If you plan to keep the connection
		240	idle then you should disable the timout temporarily or ignore the timeout
		241	in the C<on_timeout> callback, in which case AnyEvent::Handle will simply
		242	restart the timeout.
		243
		244	Zero (the default) disables this timeout.
		245
		246	=item on_timeout => $cb->($handle)
		247
		248	Called whenever the inactivity timeout passes. If you return from this
		249	callback, then the timeout will be reset as if some activity had happened,
		250	so this condition is not fatal in any way.
		251
121	=item rbuf_max => <bytes>	252	=item rbuf_max => <bytes>
122		253
123	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)	254	If defined, then a fatal error will be raised (with C<$!> set to C<ENOSPC>)
124	when the read buffer ever (strictly) exceeds this size. This is useful to	255	when the read buffer ever (strictly) exceeds this size. This is useful to
125	avoid denial-of-service attacks.	256	avoid some forms of denial-of-service attacks.
126		257
127	For example, a server accepting connections from untrusted sources should	258	For example, a server accepting connections from untrusted sources should
128	be configured to accept only so-and-so much data that it cannot act on	259	be configured to accept only so-and-so much data that it cannot act on
129	(for example, when expecting a line, an attacker could send an unlimited	260	(for example, when expecting a line, an attacker could send an unlimited
130	amount of data without a callback ever being called as long as the line	261	amount of data without a callback ever being called as long as the line
131	isn't finished).	262	isn't finished).
132		263
		264	=item autocork => <boolean>
		265
		266	When disabled (the default), then C<push_write> will try to immediately
		267	write the data to the handle, if possible. This avoids having to register
		268	a write watcher and wait for the next event loop iteration, but can
		269	be inefficient if you write multiple small chunks (on the wire, this
		270	disadvantage is usually avoided by your kernel's nagle algorithm, see
		271	C<no_delay>, but this option can save costly syscalls).
		272
		273	When enabled, then writes will always be queued till the next event loop
		274	iteration. This is efficient when you do many small writes per iteration,
		275	but less efficient when you do a single write only per iteration (or when
		276	the write buffer often is full). It also increases write latency.
		277
		278	=item no_delay => <boolean>
		279
		280	When doing small writes on sockets, your operating system kernel might
		281	wait a bit for more data before actually sending it out. This is called
		282	the Nagle algorithm, and usually it is beneficial.
		283
		284	In some situations you want as low a delay as possible, which can be
		285	accomplishd by setting this option to a true value.
		286
		287	The default is your opertaing system's default behaviour (most likely
		288	enabled), this option explicitly enables or disables it, if possible.
		289
133	=item read_size => <bytes>	290	=item read_size => <bytes>
134		291
135	The default read block size (the amount of bytes this module will try to read	292	The default read block size (the amount of bytes this module will
136	on each [loop iteration). Default: C<4096>.	293	try to read during each loop iteration, which affects memory
		294	requirements). Default: C<8192>.
137		295
138	=item low_water_mark => <bytes>	296	=item low_water_mark => <bytes>
139		297
140	Sets the amount of bytes (default: C<0>) that make up an "empty" write	298	Sets the amount of bytes (default: C<0>) that make up an "empty" write
141	buffer: If the write reaches this size or gets even samller it is	299	buffer: If the write reaches this size or gets even samller it is
142	considered empty.	300	considered empty.
143		301
		302	Sometimes it can be beneficial (for performance reasons) to add data to
		303	the write buffer before it is fully drained, but this is a rare case, as
		304	the operating system kernel usually buffers data as well, so the default
		305	is good in almost all cases.
		306
		307	=item linger => <seconds>
		308
		309	If non-zero (default: C<3600>), then the destructor of the
		310	AnyEvent::Handle object will check whether there is still outstanding
		311	write data and will install a watcher that will write this data to the
		312	socket. No errors will be reported (this mostly matches how the operating
		313	system treats outstanding data at socket close time).
		314
		315	This will not work for partial TLS data that could not be encoded
		316	yet. This data will be lost. Calling the C<stoptls> method in time might
		317	help.
		318
		319	=item peername => $string
		320
		321	A string used to identify the remote site - usually the DNS hostname
		322	(I<not> IDN!) used to create the connection, rarely the IP address.
		323
		324	Apart from being useful in error messages, this string is also used in TLS
		325	peername verification (see C<verify_peername> in L<AnyEvent::TLS>). This
		326	verification will be skipped when C<peername> is not specified or
		327	C<undef>.
		328
144	=item tls => "accept" | "connect" | Net::SSLeay::SSL object	329	=item tls => "accept" | "connect" | Net::SSLeay::SSL object
145		330
146	When this parameter is given, it enables TLS (SSL) mode, that means it	331	When this parameter is given, it enables TLS (SSL) mode, that means
147	will start making tls handshake and will transparently encrypt/decrypt	332	AnyEvent will start a TLS handshake as soon as the conenction has been
148	data.	333	established and will transparently encrypt/decrypt data afterwards.
		334
		335	All TLS protocol errors will be signalled as C<EPROTO>, with an
		336	appropriate error message.
149		337
150	TLS mode requires Net::SSLeay to be installed (it will be loaded	338	TLS mode requires Net::SSLeay to be installed (it will be loaded
151	automatically when you try to create a TLS handle).	339	automatically when you try to create a TLS handle): this module doesn't
		340	have a dependency on that module, so if your module requires it, you have
		341	to add the dependency yourself.
152		342
153	For the TLS server side, use C<accept>, and for the TLS client side of a	343	Unlike TCP, TLS has a server and client side: for the TLS server side, use
154	connection, use C<connect> mode.	344	C<accept>, and for the TLS client side of a connection, use C<connect>
		345	mode.
155		346
156	You can also provide your own TLS connection object, but you have	347	You can also provide your own TLS connection object, but you have
157	to make sure that you call either C<Net::SSLeay::set_connect_state>	348	to make sure that you call either C<Net::SSLeay::set_connect_state>
158	or C<Net::SSLeay::set_accept_state> on it before you pass it to	349	or C<Net::SSLeay::set_accept_state> on it before you pass it to
159	AnyEvent::Handle.	350	AnyEvent::Handle. Also, this module will take ownership of this connection
		351	object.
160		352
		353	At some future point, AnyEvent::Handle might switch to another TLS
		354	implementation, then the option to use your own session object will go
		355	away.
		356
		357	B<IMPORTANT:> since Net::SSLeay "objects" are really only integers,
		358	passing in the wrong integer will lead to certain crash. This most often
		359	happens when one uses a stylish C<< tls => 1 >> and is surprised about the
		360	segmentation fault.
		361
161	See the C<starttls> method if you need to start TLs negotiation later.	362	See the C<< ->starttls >> method for when need to start TLS negotiation later.
162		363
163	=item tls_ctx => $ssl_ctx	364	=item tls_ctx => $anyevent_tls
164		365
165	Use the given Net::SSLeay::CTX object to create the new TLS connection	366	Use the given C<AnyEvent::TLS> object to create the new TLS connection
166	(unless a connection object was specified directly). If this parameter is	367	(unless a connection object was specified directly). If this parameter is
167	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.	368	missing, then AnyEvent::Handle will use C<AnyEvent::Handle::TLS_CTX>.
168		369
		370	Instead of an object, you can also specify a hash reference with C<< key
		371	=> value >> pairs. Those will be passed to L<AnyEvent::TLS> to create a
		372	new TLS context object.
		373
		374	=item on_starttls => $cb->($handle, $success[, $error_message])
		375
		376	This callback will be invoked when the TLS/SSL handshake has finished. If
		377	C<$success> is true, then the TLS handshake succeeded, otherwise it failed
		378	(C<on_stoptls> will not be called in this case).
		379
		380	The session in C<< $handle->{tls} >> can still be examined in this
		381	callback, even when the handshake was not successful.
		382
		383	TLS handshake failures will not cause C<on_error> to be invoked when this
		384	callback is in effect, instead, the error message will be passed to C<on_starttls>.
		385
		386	Without this callback, handshake failures lead to C<on_error> being
		387	called, as normal.
		388
		389	Note that you cannot call C<starttls> right again in this callback. If you
		390	need to do that, start an zero-second timer instead whose callback can
		391	then call C<< ->starttls >> again.
		392
		393	=item on_stoptls => $cb->($handle)
		394
		395	When a SSLv3/TLS shutdown/close notify/EOF is detected and this callback is
		396	set, then it will be invoked after freeing the TLS session. If it is not,
		397	then a TLS shutdown condition will be treated like a normal EOF condition
		398	on the handle.
		399
		400	The session in C<< $handle->{tls} >> can still be examined in this
		401	callback.
		402
		403	This callback will only be called on TLS shutdowns, not when the
		404	underlying handle signals EOF.
		405
		406	=item json => JSON or JSON::XS object
		407
		408	This is the json coder object used by the C<json> read and write types.
		409
		410	If you don't supply it, then AnyEvent::Handle will create and use a
		411	suitable one (on demand), which will write and expect UTF-8 encoded JSON
		412	texts.
		413
		414	Note that you are responsible to depend on the JSON module if you want to
		415	use this functionality, as AnyEvent does not have a dependency itself.
		416
169	=back	417	=back
170		418
171	=cut	419	=cut
172
173	our (%RH, %WH);
174
175	sub register_read_type($$) {
176	$RH{$_[0]} = $_[1];
177	}
178
179	sub register_write_type($$) {
180	$WH{$_[0]} = $_[1];
181	}
182		420
183	sub new {	421	sub new {
184	my $class = shift;	422	my $class = shift;
185
186	my $self = bless { @_ }, $class;	423	my $self = bless { @_ }, $class;
187		424
188	$self->{fh} or Carp::croak "mandatory argument fh is missing";	425	if ($self->{fh}) {
		426	$self->_start;
		427	return unless $self->{fh}; # could be gone by now
		428
		429	} elsif ($self->{connect}) {
		430	require AnyEvent::Socket;
		431
		432	$self->{peername} = $self->{connect}[0]
		433	unless exists $self->{peername};
		434
		435	$self->{_skip_drain_rbuf} = 1;
		436
		437	{
		438	Scalar::Util::weaken (my $self = $self);
		439
		440	$self->{_connect} =
		441	AnyEvent::Socket::tcp_connect (
		442	$self->{connect}[0],
		443	$self->{connect}[1],
		444	sub {
		445	my ($fh, $host, $port, $retry) = @_;
		446
		447	if ($fh) {
		448	$self->{fh} = $fh;
		449
		450	delete $self->{_skip_drain_rbuf};
		451	$self->_start;
		452
		453	$self->{on_connect}
		454	and $self->{on_connect}($self, $host, $port, sub {
		455	delete @$self{qw(fh _tw _rtw _wtw _ww _rw _eof _queue rbuf _wbuf tls _tls_rbuf _tls_wbuf)};
		456	$self->{_skip_drain_rbuf} = 1;
		457	&$retry;
		458	});
		459
		460	} else {
		461	if ($self->{on_connect_error}) {
		462	$self->{on_connect_error}($self, "$!");
		463	$self->destroy;
		464	} else {
		465	$self->_error ($!, 1);
		466	}
		467	}
		468	},
		469	sub {
		470	local $self->{fh} = $_[0];
		471
		472	$self->{on_prepare}
		473	? $self->{on_prepare}->($self)
		474	: ()
		475	}
		476	);
		477	}
		478
		479	} else {
		480	Carp::croak "AnyEvent::Handle: either an existing fh or the connect parameter must be specified";
		481	}
		482
		483	$self
		484	}
		485
		486	sub _start {
		487	my ($self) = @_;
189		488
190	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;	489	AnyEvent::Util::fh_nonblocking $self->{fh}, 1;
191		490
192	if ($self->{tls}) {	491	$self->{_activity} =
193	require Net::SSLeay;	492	$self->{_ractivity} =
		493	$self->{_wactivity} = AE::now;
		494
		495	$self->timeout (delete $self->{timeout} ) if $self->{timeout};
		496	$self->rtimeout (delete $self->{rtimeout}) if $self->{rtimeout};
		497	$self->wtimeout (delete $self->{wtimeout}) if $self->{wtimeout};
		498
		499	$self->no_delay (delete $self->{no_delay}) if exists $self->{no_delay};
		500
194	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx});	501	$self->starttls (delete $self->{tls}, delete $self->{tls_ctx})
195	}	502	if $self->{tls};
196		503
197	$self->on_eof (delete $self->{on_eof} ) if $self->{on_eof};
198	$self->on_error (delete $self->{on_error}) if $self->{on_error};
199	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};	504	$self->on_drain (delete $self->{on_drain}) if $self->{on_drain};
200	$self->on_read (delete $self->{on_read} ) if $self->{on_read};
201		505
202	$self->start_read;	506	$self->start_read
		507	if $self->{on_read} || @{ $self->{_queue} };
203		508
204	$self	509	$self->_drain_wbuf;
205	}	510	}
206		511
207	sub _shutdown {
208	my ($self) = @_;
209
210	delete $self->{rw};
211	delete $self->{ww};
212	delete $self->{fh};
213	}
214
215	sub error {	512	sub _error {
216	my ($self) = @_;	513	my ($self, $errno, $fatal, $message) = @_;
217		514
218	{	515	$! = $errno;
219	local $!;	516	$message ||= "$!";
220	$self->_shutdown;
221	}
222		517
223	if ($self->{on_error}) {	518	if ($self->{on_error}) {
224	$self->{on_error}($self);	519	$self->{on_error}($self, $fatal, $message);
225	} else {	520	$self->destroy if $fatal;
		521	} elsif ($self->{fh}) {
		522	$self->destroy;
226	Carp::croak "AnyEvent::Handle uncaught fatal error: $!";	523	Carp::croak "AnyEvent::Handle uncaught error: $message";
227	}	524	}
228	}	525	}
229		526
230	=item $fh = $handle->fh	527	=item $fh = $handle->fh
231		528
232	This method returns the file handle of the L<AnyEvent::Handle> object.	529	This method returns the file handle used to create the L<AnyEvent::Handle> object.
233		530
234	=cut	531	=cut
235		532
236	sub fh { $_[0]->{fh} }	533	sub fh { $_[0]{fh} }
237		534
238	=item $handle->on_error ($cb)	535	=item $handle->on_error ($cb)
239		536
240	Replace the current C<on_error> callback (see the C<on_error> constructor argument).	537	Replace the current C<on_error> callback (see the C<on_error> constructor argument).
241		538
…		…
253		550
254	sub on_eof {	551	sub on_eof {
255	$_[0]{on_eof} = $_[1];	552	$_[0]{on_eof} = $_[1];
256	}	553	}
257		554
		555	=item $handle->on_timeout ($cb)
		556
		557	=item $handle->on_rtimeout ($cb)
		558
		559	=item $handle->on_wtimeout ($cb)
		560
		561	Replace the current C<on_timeout>, C<on_rtimeout> or C<on_wtimeout>
		562	callback, or disables the callback (but not the timeout) if C<$cb> =
		563	C<undef>. See the C<timeout> constructor argument and method.
		564
		565	=cut
		566
		567	# see below
		568
		569	=item $handle->autocork ($boolean)
		570
		571	Enables or disables the current autocork behaviour (see C<autocork>
		572	constructor argument). Changes will only take effect on the next write.
		573
		574	=cut
		575
		576	sub autocork {
		577	$_[0]{autocork} = $_[1];
		578	}
		579
		580	=item $handle->no_delay ($boolean)
		581
		582	Enables or disables the C<no_delay> setting (see constructor argument of
		583	the same name for details).
		584
		585	=cut
		586
		587	sub no_delay {
		588	$_[0]{no_delay} = $_[1];
		589
		590	eval {
		591	local $SIG{__DIE__};
		592	setsockopt $_[0]{fh}, &Socket::IPPROTO_TCP, &Socket::TCP_NODELAY, int $_[1]
		593	if $_[0]{fh};
		594	};
		595	}
		596
		597	=item $handle->on_starttls ($cb)
		598
		599	Replace the current C<on_starttls> callback (see the C<on_starttls> constructor argument).
		600
		601	=cut
		602
		603	sub on_starttls {
		604	$_[0]{on_starttls} = $_[1];
		605	}
		606
		607	=item $handle->on_stoptls ($cb)
		608
		609	Replace the current C<on_stoptls> callback (see the C<on_stoptls> constructor argument).
		610
		611	=cut
		612
		613	sub on_starttls {
		614	$_[0]{on_stoptls} = $_[1];
		615	}
		616
		617	=item $handle->rbuf_max ($max_octets)
		618
		619	Configures the C<rbuf_max> setting (C<undef> disables it).
		620
		621	=cut
		622
		623	sub rbuf_max {
		624	$_[0]{rbuf_max} = $_[1];
		625	}
		626
		627	#############################################################################
		628
		629	=item $handle->timeout ($seconds)
		630
		631	=item $handle->rtimeout ($seconds)
		632
		633	=item $handle->wtimeout ($seconds)
		634
		635	Configures (or disables) the inactivity timeout.
		636
		637	=item $handle->timeout_reset
		638
		639	=item $handle->rtimeout_reset
		640
		641	=item $handle->wtimeout_reset
		642
		643	Reset the activity timeout, as if data was received or sent.
		644
		645	These methods are cheap to call.
		646
		647	=cut
		648
		649	for my $dir ("", "r", "w") {
		650	my $timeout = "${dir}timeout";
		651	my $tw = "_${dir}tw";
		652	my $on_timeout = "on_${dir}timeout";
		653	my $activity = "_${dir}activity";
		654	my $cb;
		655
		656	*$on_timeout = sub {
		657	$_[0]{$on_timeout} = $_[1];
		658	};
		659
		660	*$timeout = sub {
		661	my ($self, $new_value) = @_;
		662
		663	$self->{$timeout} = $new_value;
		664	delete $self->{$tw}; &$cb;
		665	};
		666
		667	*{"${dir}timeout_reset"} = sub {
		668	$_[0]{$activity} = AE::now;
		669	};
		670
		671	# main workhorse:
		672	# reset the timeout watcher, as neccessary
		673	# also check for time-outs
		674	$cb = sub {
		675	my ($self) = @_;
		676
		677	if ($self->{$timeout} && $self->{fh}) {
		678	my $NOW = AE::now;
		679
		680	# when would the timeout trigger?
		681	my $after = $self->{$activity} + $self->{$timeout} - $NOW;
		682
		683	# now or in the past already?
		684	if ($after <= 0) {
		685	$self->{$activity} = $NOW;
		686
		687	if ($self->{$on_timeout}) {
		688	$self->{$on_timeout}($self);
		689	} else {
		690	$self->_error (Errno::ETIMEDOUT);
		691	}
		692
		693	# callback could have changed timeout value, optimise
		694	return unless $self->{$timeout};
		695
		696	# calculate new after
		697	$after = $self->{$timeout};
		698	}
		699
		700	Scalar::Util::weaken $self;
		701	return unless $self; # ->error could have destroyed $self
		702
		703	$self->{$tw} ||= AE::timer $after, 0, sub {
		704	delete $self->{$tw};
		705	$cb->($self);
		706	};
		707	} else {
		708	delete $self->{$tw};
		709	}
		710	}
		711	}
		712
258	#############################################################################	713	#############################################################################
259		714
260	=back	715	=back
261		716
262	=head2 WRITE QUEUE	717	=head2 WRITE QUEUE
…		…
283	my ($self, $cb) = @_;	738	my ($self, $cb) = @_;
284		739
285	$self->{on_drain} = $cb;	740	$self->{on_drain} = $cb;
286		741
287	$cb->($self)	742	$cb->($self)
288	if $cb && $self->{low_water_mark} >= length $self->{wbuf};	743	if $cb && $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf});
289	}	744	}
290		745
291	=item $handle->push_write ($data)	746	=item $handle->push_write ($data)
292		747
293	Queues the given scalar to be written. You can push as much data as you	748	Queues the given scalar to be written. You can push as much data as you
…		…
297	=cut	752	=cut
298		753
299	sub _drain_wbuf {	754	sub _drain_wbuf {
300	my ($self) = @_;	755	my ($self) = @_;
301		756
302	if (!$self->{ww} && length $self->{wbuf}) {	757	if (!$self->{_ww} && length $self->{wbuf}) {
		758
303	Scalar::Util::weaken $self;	759	Scalar::Util::weaken $self;
		760
304	my $cb = sub {	761	my $cb = sub {
305	my $len = syswrite $self->{fh}, $self->{wbuf};	762	my $len = syswrite $self->{fh}, $self->{wbuf};
306		763
307	if ($len >= 0) {	764	if (defined $len) {
308	substr $self->{wbuf}, 0, $len, "";	765	substr $self->{wbuf}, 0, $len, "";
309		766
		767	$self->{_activity} = $self->{_wactivity} = AE::now;
		768
310	$self->{on_drain}($self)	769	$self->{on_drain}($self)
311	if $self->{low_water_mark} >= length $self->{wbuf}	770	if $self->{low_water_mark} >= (length $self->{wbuf}) + (length $self->{_tls_wbuf})
312	&& $self->{on_drain};	771	&& $self->{on_drain};
313		772
314	delete $self->{ww} unless length $self->{wbuf};	773	delete $self->{_ww} unless length $self->{wbuf};
315	} elsif ($! != EAGAIN && $! != EINTR) {	774	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
316	$self->error;	775	$self->_error ($!, 1);
317	}	776	}
318	};	777	};
319		778
320	$self->{ww} = AnyEvent->io (fh => $self->{fh}, poll => "w", cb => $cb);	779	# try to write data immediately
		780	$cb->() unless $self->{autocork};
321		781
322	$cb->($self);	782	# if still data left in wbuf, we need to poll
		783	$self->{_ww} = AE::io $self->{fh}, 1, $cb
		784	if length $self->{wbuf};
323	};	785	};
		786	}
		787
		788	our %WH;
		789
		790	sub register_write_type($$) {
		791	$WH{$_[0]} = $_[1];
324	}	792	}
325		793
326	sub push_write {	794	sub push_write {
327	my $self = shift;	795	my $self = shift;
328		796
…		…
331		799
332	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")	800	@_ = ($WH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_write")
333	->($self, @_);	801	->($self, @_);
334	}	802	}
335		803
336	if ($self->{filter_w}) {	804	if ($self->{tls}) {
337	$self->{filter_w}->($self, \$_[0]);	805	$self->{_tls_wbuf} .= $_[0];
		806	&_dotls ($self) if $self->{fh};
338	} else {	807	} else {
339	$self->{wbuf} .= $_[0];	808	$self->{wbuf} .= $_[0];
340	$self->_drain_wbuf;	809	$self->_drain_wbuf if $self->{fh};
341	}	810	}
342	}	811	}
343		812
344	=item $handle->push_write (type => @args)	813	=item $handle->push_write (type => @args)
345
346	=item $handle->unshift_write (type => @args)
347		814
348	Instead of formatting your data yourself, you can also let this module do	815	Instead of formatting your data yourself, you can also let this module do
349	the job by specifying a type and type-specific arguments.	816	the job by specifying a type and type-specific arguments.
350		817
351	Predefined types are:	818	Predefined types are (if you have ideas for additional types, feel free to
		819	drop by and tell us):
352		820
353	=over 4	821	=over 4
354		822
355	=item netstring => $string	823	=item netstring => $string
356		824
…		…
360	=cut	828	=cut
361		829
362	register_write_type netstring => sub {	830	register_write_type netstring => sub {
363	my ($self, $string) = @_;	831	my ($self, $string) = @_;
364		832
365	sprintf "%d:%s,", (length $string), $string	833	(length $string) . ":$string,"
366	};	834	};
367		835
		836	=item packstring => $format, $data
		837
		838	An octet string prefixed with an encoded length. The encoding C<$format>
		839	uses the same format as a Perl C<pack> format, but must specify a single
		840	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		841	optional C<!>, C<< < >> or C<< > >> modifier).
		842
		843	=cut
		844
		845	register_write_type packstring => sub {
		846	my ($self, $format, $string) = @_;
		847
		848	pack "$format/a*", $string
		849	};
		850
		851	=item json => $array_or_hashref
		852
		853	Encodes the given hash or array reference into a JSON object. Unless you
		854	provide your own JSON object, this means it will be encoded to JSON text
		855	in UTF-8.
		856
		857	JSON objects (and arrays) are self-delimiting, so you can write JSON at
		858	one end of a handle and read them at the other end without using any
		859	additional framing.
		860
		861	The generated JSON text is guaranteed not to contain any newlines: While
		862	this module doesn't need delimiters after or between JSON texts to be
		863	able to read them, many other languages depend on that.
		864
		865	A simple RPC protocol that interoperates easily with others is to send
		866	JSON arrays (or objects, although arrays are usually the better choice as
		867	they mimic how function argument passing works) and a newline after each
		868	JSON text:
		869
		870	$handle->push_write (json => ["method", "arg1", "arg2"]); # whatever
		871	$handle->push_write ("\012");
		872
		873	An AnyEvent::Handle receiver would simply use the C<json> read type and
		874	rely on the fact that the newline will be skipped as leading whitespace:
		875
		876	$handle->push_read (json => sub { my $array = $_[1]; ... });
		877
		878	Other languages could read single lines terminated by a newline and pass
		879	this line into their JSON decoder of choice.
		880
		881	=cut
		882
		883	sub json_coder() {
		884	eval { require JSON::XS; JSON::XS->new->utf8 }
		885	|| do { require JSON; JSON->new->utf8 }
		886	}
		887
		888	register_write_type json => sub {
		889	my ($self, $ref) = @_;
		890
		891	my $json = $self->{json} ||= json_coder;
		892
		893	$json->encode ($ref)
		894	};
		895
		896	=item storable => $reference
		897
		898	Freezes the given reference using L<Storable> and writes it to the
		899	handle. Uses the C<nfreeze> format.
		900
		901	=cut
		902
		903	register_write_type storable => sub {
		904	my ($self, $ref) = @_;
		905
		906	require Storable;
		907
		908	pack "w/a*", Storable::nfreeze ($ref)
		909	};
		910
368	=back	911	=back
369		912
370	=cut	913	=item $handle->push_shutdown
371		914
		915	Sometimes you know you want to close the socket after writing your data
		916	before it was actually written. One way to do that is to replace your
		917	C<on_drain> handler by a callback that shuts down the socket (and set
		918	C<low_water_mark> to C<0>). This method is a shorthand for just that, and
		919	replaces the C<on_drain> callback with:
372		920
		921	sub { shutdown $_[0]{fh}, 1 } # for push_shutdown
		922
		923	This simply shuts down the write side and signals an EOF condition to the
		924	the peer.
		925
		926	You can rely on the normal read queue and C<on_eof> handling
		927	afterwards. This is the cleanest way to close a connection.
		928
		929	=cut
		930
		931	sub push_shutdown {
		932	my ($self) = @_;
		933
		934	delete $self->{low_water_mark};
		935	$self->on_drain (sub { shutdown $_[0]{fh}, 1 });
		936	}
		937
		938	=item AnyEvent::Handle::register_write_type type => $coderef->($handle, @args)
		939
		940	This function (not method) lets you add your own types to C<push_write>.
		941	Whenever the given C<type> is used, C<push_write> will invoke the code
		942	reference with the handle object and the remaining arguments.
		943
		944	The code reference is supposed to return a single octet string that will
		945	be appended to the write buffer.
		946
		947	Note that this is a function, and all types registered this way will be
		948	global, so try to use unique names.
		949
		950	=cut
373		951
374	#############################################################################	952	#############################################################################
375		953
376	=back	954	=back
377		955
…		…
384	ways, the "simple" way, using only C<on_read> and the "complex" way, using	962	ways, the "simple" way, using only C<on_read> and the "complex" way, using
385	a queue.	963	a queue.
386		964
387	In the simple case, you just install an C<on_read> callback and whenever	965	In the simple case, you just install an C<on_read> callback and whenever
388	new data arrives, it will be called. You can then remove some data (if	966	new data arrives, it will be called. You can then remove some data (if
389	enough is there) from the read buffer (C<< $handle->rbuf >>) if you want	967	enough is there) from the read buffer (C<< $handle->rbuf >>). Or you cna
390	or not.	968	leave the data there if you want to accumulate more (e.g. when only a
		969	partial message has been received so far).
391		970
392	In the more complex case, you want to queue multiple callbacks. In this	971	In the more complex case, you want to queue multiple callbacks. In this
393	case, AnyEvent::Handle will call the first queued callback each time new	972	case, AnyEvent::Handle will call the first queued callback each time new
394	data arrives and removes it when it has done its job (see C<push_read>,	973	data arrives (also the first time it is queued) and removes it when it has
395	below).	974	done its job (see C<push_read>, below).
396		975
397	This way you can, for example, push three line-reads, followed by reading	976	This way you can, for example, push three line-reads, followed by reading
398	a chunk of data, and AnyEvent::Handle will execute them in order.	977	a chunk of data, and AnyEvent::Handle will execute them in order.
399		978
400	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by	979	Example 1: EPP protocol parser. EPP sends 4 byte length info, followed by
401	the specified number of bytes which give an XML datagram.	980	the specified number of bytes which give an XML datagram.
402		981
403	# in the default state, expect some header bytes	982	# in the default state, expect some header bytes
404	$handle->on_read (sub {	983	$handle->on_read (sub {
405	# some data is here, now queue the length-header-read (4 octets)	984	# some data is here, now queue the length-header-read (4 octets)
406	shift->unshift_read_chunk (4, sub {	985	shift->unshift_read (chunk => 4, sub {
407	# header arrived, decode	986	# header arrived, decode
408	my $len = unpack "N", $_[1];	987	my $len = unpack "N", $_[1];
409		988
410	# now read the payload	989	# now read the payload
411	shift->unshift_read_chunk ($len, sub {	990	shift->unshift_read (chunk => $len, sub {
412	my $xml = $_[1];	991	my $xml = $_[1];
413	# handle xml	992	# handle xml
414	});	993	});
415	});	994	});
416	});	995	});
417		996
418	Example 2: Implement a client for a protocol that replies either with	997	Example 2: Implement a client for a protocol that replies either with "OK"
419	"OK" and another line or "ERROR" for one request, and 64 bytes for the	998	and another line or "ERROR" for the first request that is sent, and 64
420	second request. Due tot he availability of a full queue, we can just	999	bytes for the second request. Due to the availability of a queue, we can
421	pipeline sending both requests and manipulate the queue as necessary in	1000	just pipeline sending both requests and manipulate the queue as necessary
422	the callbacks:	1001	in the callbacks.
423		1002
424	# request one	1003	When the first callback is called and sees an "OK" response, it will
		1004	C<unshift> another line-read. This line-read will be queued I<before> the
		1005	64-byte chunk callback.
		1006
		1007	# request one, returns either "OK + extra line" or "ERROR"
425	$handle->push_write ("request 1\015\012");	1008	$handle->push_write ("request 1\015\012");
426		1009
427	# we expect "ERROR" or "OK" as response, so push a line read	1010	# we expect "ERROR" or "OK" as response, so push a line read
428	$handle->push_read_line (sub {	1011	$handle->push_read (line => sub {
429	# if we got an "OK", we have to _prepend_ another line,	1012	# if we got an "OK", we have to _prepend_ another line,
430	# so it will be read before the second request reads its 64 bytes	1013	# so it will be read before the second request reads its 64 bytes
431	# which are already in the queue when this callback is called	1014	# which are already in the queue when this callback is called
432	# we don't do this in case we got an error	1015	# we don't do this in case we got an error
433	if ($_[1] eq "OK") {	1016	if ($_[1] eq "OK") {
434	$_[0]->unshift_read_line (sub {	1017	$_[0]->unshift_read (line => sub {
435	my $response = $_[1];	1018	my $response = $_[1];
436	...	1019	...
437	});	1020	});
438	}	1021	}
439	});	1022	});
440		1023
441	# request two	1024	# request two, simply returns 64 octets
442	$handle->push_write ("request 2\015\012");	1025	$handle->push_write ("request 2\015\012");
443		1026
444	# simply read 64 bytes, always	1027	# simply read 64 bytes, always
445	$handle->push_read_chunk (64, sub {	1028	$handle->push_read (chunk => 64, sub {
446	my $response = $_[1];	1029	my $response = $_[1];
447	...	1030	...
448	});	1031	});
449		1032
450	=over 4	1033	=over 4
451		1034
452	=cut	1035	=cut
453		1036
454	sub _drain_rbuf {	1037	sub _drain_rbuf {
455	my ($self) = @_;	1038	my ($self) = @_;
		1039
		1040	# avoid recursion
		1041	return if $self->{_skip_drain_rbuf};
		1042	local $self->{_skip_drain_rbuf} = 1;
		1043
		1044	while () {
		1045	# we need to use a separate tls read buffer, as we must not receive data while
		1046	# we are draining the buffer, and this can only happen with TLS.
		1047	$self->{rbuf} .= delete $self->{_tls_rbuf}
		1048	if exists $self->{_tls_rbuf};
		1049
		1050	my $len = length $self->{rbuf};
		1051
		1052	if (my $cb = shift @{ $self->{_queue} }) {
		1053	unless ($cb->($self)) {
		1054	# no progress can be made
		1055	# (not enough data and no data forthcoming)
		1056	$self->_error (Errno::EPIPE, 1), return
		1057	if $self->{_eof};
		1058
		1059	unshift @{ $self->{_queue} }, $cb;
		1060	last;
		1061	}
		1062	} elsif ($self->{on_read}) {
		1063	last unless $len;
		1064
		1065	$self->{on_read}($self);
		1066
		1067	if (
		1068	$len == length $self->{rbuf} # if no data has been consumed
		1069	&& !@{ $self->{_queue} } # and the queue is still empty
		1070	&& $self->{on_read} # but we still have on_read
		1071	) {
		1072	# no further data will arrive
		1073	# so no progress can be made
		1074	$self->_error (Errno::EPIPE, 1), return
		1075	if $self->{_eof};
		1076
		1077	last; # more data might arrive
		1078	}
		1079	} else {
		1080	# read side becomes idle
		1081	delete $self->{_rw} unless $self->{tls};
		1082	last;
		1083	}
		1084	}
		1085
		1086	if ($self->{_eof}) {
		1087	$self->{on_eof}
		1088	? $self->{on_eof}($self)
		1089	: $self->_error (0, 1, "Unexpected end-of-file");
		1090
		1091	return;
		1092	}
456		1093
457	if (	1094	if (
458	defined $self->{rbuf_max}	1095	defined $self->{rbuf_max}
459	&& $self->{rbuf_max} < length $self->{rbuf}	1096	&& $self->{rbuf_max} < length $self->{rbuf}
460	) {	1097	) {
461	$! = &Errno::ENOSPC; return $self->error;	1098	$self->_error (Errno::ENOSPC, 1), return;
462	}	1099	}
463		1100
464	return if $self->{in_drain};	1101	# may need to restart read watcher
465	local $self->{in_drain} = 1;	1102	unless ($self->{_rw}) {
466		1103	$self->start_read
467	while (my $len = length $self->{rbuf}) {	1104	if $self->{on_read} || @{ $self->{_queue} };
468	no strict 'refs';
469	if (my $cb = shift @{ $self->{queue} }) {
470	unless ($cb->($self)) {
471	if ($self->{eof}) {
472	# no progress can be made (not enough data and no data forthcoming)
473	$! = &Errno::EPIPE; return $self->error;
474	}
475
476	unshift @{ $self->{queue} }, $cb;
477	return;
478	}
479	} elsif ($self->{on_read}) {
480	$self->{on_read}($self);
481
482	if (
483	$self->{eof} # if no further data will arrive
484	&& $len == length $self->{rbuf} # and no data has been consumed
485	&& !@{ $self->{queue} } # and the queue is still empty
486	&& $self->{on_read} # and we still want to read data
487	) {
488	# then no progress can be made
489	$! = &Errno::EPIPE; return $self->error;
490	}
491	} else {
492	# read side becomes idle
493	delete $self->{rw};
494	return;
495	}
496	}
497
498	if ($self->{eof}) {
499	$self->_shutdown;
500	$self->{on_eof}($self)
501	if $self->{on_eof};
502	}	1105	}
503	}	1106	}
504		1107
505	=item $handle->on_read ($cb)	1108	=item $handle->on_read ($cb)
506		1109
…		…
512		1115
513	sub on_read {	1116	sub on_read {
514	my ($self, $cb) = @_;	1117	my ($self, $cb) = @_;
515		1118
516	$self->{on_read} = $cb;	1119	$self->{on_read} = $cb;
		1120	$self->_drain_rbuf if $cb;
517	}	1121	}
518		1122
519	=item $handle->rbuf	1123	=item $handle->rbuf
520		1124
521	Returns the read buffer (as a modifiable lvalue).	1125	Returns the read buffer (as a modifiable lvalue).
522		1126
523	You can access the read buffer directly as the C<< ->{rbuf} >> member, if	1127	You can access the read buffer directly as the C<< ->{rbuf} >>
524	you want.	1128	member, if you want. However, the only operation allowed on the
		1129	read buffer (apart from looking at it) is removing data from its
		1130	beginning. Otherwise modifying or appending to it is not allowed and will
		1131	lead to hard-to-track-down bugs.
525		1132
526	NOTE: The read buffer should only be used or modified if the C<on_read>,	1133	NOTE: The read buffer should only be used or modified if the C<on_read>,
527	C<push_read> or C<unshift_read> methods are used. The other read methods	1134	C<push_read> or C<unshift_read> methods are used. The other read methods
528	automatically manage the read buffer.	1135	automatically manage the read buffer.
529		1136
…		…
552	interested in (which can be none at all) and return a true value. After returning	1159	interested in (which can be none at all) and return a true value. After returning
553	true, it will be removed from the queue.	1160	true, it will be removed from the queue.
554		1161
555	=cut	1162	=cut
556		1163
		1164	our %RH;
		1165
		1166	sub register_read_type($$) {
		1167	$RH{$_[0]} = $_[1];
		1168	}
		1169
557	sub push_read {	1170	sub push_read {
558	my $self = shift;	1171	my $self = shift;
559	my $cb = pop;	1172	my $cb = pop;
560		1173
561	if (@_) {	1174	if (@_) {
…		…
563		1176
564	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")	1177	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::push_read")
565	->($self, $cb, @_);	1178	->($self, $cb, @_);
566	}	1179	}
567		1180
568	push @{ $self->{queue} }, $cb;	1181	push @{ $self->{_queue} }, $cb;
569	$self->_drain_rbuf;	1182	$self->_drain_rbuf;
570	}	1183	}
571		1184
572	sub unshift_read {	1185	sub unshift_read {
573	my $self = shift;	1186	my $self = shift;
…		…
579	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")	1192	$cb = ($RH{$type} or Carp::croak "unsupported type passed to AnyEvent::Handle::unshift_read")
580	->($self, $cb, @_);	1193	->($self, $cb, @_);
581	}	1194	}
582		1195
583		1196
584	unshift @{ $self->{queue} }, $cb;	1197	unshift @{ $self->{_queue} }, $cb;
585	$self->_drain_rbuf;	1198	$self->_drain_rbuf;
586	}	1199	}
587		1200
588	=item $handle->push_read (type => @args, $cb)	1201	=item $handle->push_read (type => @args, $cb)
589		1202
…		…
591		1204
592	Instead of providing a callback that parses the data itself you can chose	1205	Instead of providing a callback that parses the data itself you can chose
593	between a number of predefined parsing formats, for chunks of data, lines	1206	between a number of predefined parsing formats, for chunks of data, lines
594	etc.	1207	etc.
595		1208
596	The types currently supported are:	1209	Predefined types are (if you have ideas for additional types, feel free to
		1210	drop by and tell us):
597		1211
598	=over 4	1212	=over 4
599		1213
600	=item chunk => $octets, $cb->($self, $data)	1214	=item chunk => $octets, $cb->($handle, $data)
601		1215
602	Invoke the callback only once C<$octets> bytes have been read. Pass the	1216	Invoke the callback only once C<$octets> bytes have been read. Pass the
603	data read to the callback. The callback will never be called with less	1217	data read to the callback. The callback will never be called with less
604	data.	1218	data.
605		1219
…		…
619	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");	1233	$cb->($_[0], substr $_[0]{rbuf}, 0, $len, "");
620	1	1234	1
621	}	1235	}
622	};	1236	};
623		1237
624	# compatibility with older API
625	sub push_read_chunk {
626	$_[0]->push_read (chunk => $_[1], $_[2]);
627	}
628
629	sub unshift_read_chunk {
630	$_[0]->unshift_read (chunk => $_[1], $_[2]);
631	}
632
633	=item line => [$eol, ]$cb->($self, $line, $eol)	1238	=item line => [$eol, ]$cb->($handle, $line, $eol)
634		1239
635	The callback will be called only once a full line (including the end of	1240	The callback will be called only once a full line (including the end of
636	line marker, C<$eol>) has been read. This line (excluding the end of line	1241	line marker, C<$eol>) has been read. This line (excluding the end of line
637	marker) will be passed to the callback as second argument (C<$line>), and	1242	marker) will be passed to the callback as second argument (C<$line>), and
638	the end of line marker as the third argument (C<$eol>).	1243	the end of line marker as the third argument (C<$eol>).
…		…
652	=cut	1257	=cut
653		1258
654	register_read_type line => sub {	1259	register_read_type line => sub {
655	my ($self, $cb, $eol) = @_;	1260	my ($self, $cb, $eol) = @_;
656		1261
657	$eol = qr|(\015?\012)| if @_ < 3;	1262	if (@_ < 3) {
		1263	# this is more than twice as fast as the generic code below
		1264	sub {
		1265	$_[0]{rbuf} =~ s/^([^\015\012]*)(\015?\012)// or return;
		1266
		1267	$cb->($_[0], $1, $2);
		1268	1
		1269	}
		1270	} else {
658	$eol = quotemeta $eol unless ref $eol;	1271	$eol = quotemeta $eol unless ref $eol;
659	$eol = qr|^(.*?)($eol)|s;	1272	$eol = qr|^(.*?)($eol)|s;
		1273
		1274	sub {
		1275	$_[0]{rbuf} =~ s/$eol// or return;
		1276
		1277	$cb->($_[0], $1, $2);
		1278	1
		1279	}
		1280	}
		1281	};
		1282
		1283	=item regex => $accept[, $reject[, $skip], $cb->($handle, $data)
		1284
		1285	Makes a regex match against the regex object C<$accept> and returns
		1286	everything up to and including the match.
		1287
		1288	Example: read a single line terminated by '\n'.
		1289
		1290	$handle->push_read (regex => qr<\n>, sub { ... });
		1291
		1292	If C<$reject> is given and not undef, then it determines when the data is
		1293	to be rejected: it is matched against the data when the C<$accept> regex
		1294	does not match and generates an C<EBADMSG> error when it matches. This is
		1295	useful to quickly reject wrong data (to avoid waiting for a timeout or a
		1296	receive buffer overflow).
		1297
		1298	Example: expect a single decimal number followed by whitespace, reject
		1299	anything else (not the use of an anchor).
		1300
		1301	$handle->push_read (regex => qr<^[0-9]+\s>, qr<[^0-9]>, sub { ... });
		1302
		1303	If C<$skip> is given and not C<undef>, then it will be matched against
		1304	the receive buffer when neither C<$accept> nor C<$reject> match,
		1305	and everything preceding and including the match will be accepted
		1306	unconditionally. This is useful to skip large amounts of data that you
		1307	know cannot be matched, so that the C<$accept> or C<$reject> regex do not
		1308	have to start matching from the beginning. This is purely an optimisation
		1309	and is usually worth only when you expect more than a few kilobytes.
		1310
		1311	Example: expect a http header, which ends at C<\015\012\015\012>. Since we
		1312	expect the header to be very large (it isn't in practise, but...), we use
		1313	a skip regex to skip initial portions. The skip regex is tricky in that
		1314	it only accepts something not ending in either \015 or \012, as these are
		1315	required for the accept regex.
		1316
		1317	$handle->push_read (regex =>
		1318	qr<\015\012\015\012>,
		1319	undef, # no reject
		1320	qr<^.*[^\015\012]>,
		1321	sub { ... });
		1322
		1323	=cut
		1324
		1325	register_read_type regex => sub {
		1326	my ($self, $cb, $accept, $reject, $skip) = @_;
		1327
		1328	my $data;
		1329	my $rbuf = \$self->{rbuf};
660		1330
661	sub {	1331	sub {
662	$_[0]{rbuf} =~ s/$eol// or return;	1332	# accept
663		1333	if ($$rbuf =~ $accept) {
664	$cb->($_[0], $1, $2);	1334	$data .= substr $$rbuf, 0, $+[0], "";
		1335	$cb->($self, $data);
		1336	return 1;
		1337	}
665	1	1338
		1339	# reject
		1340	if ($reject && $$rbuf =~ $reject) {
		1341	$self->_error (Errno::EBADMSG);
		1342	}
		1343
		1344	# skip
		1345	if ($skip && $$rbuf =~ $skip) {
		1346	$data .= substr $$rbuf, 0, $+[0], "";
		1347	}
		1348
		1349	()
666	}	1350	}
667	};	1351	};
668		1352
669	# compatibility with older API
670	sub push_read_line {
671	my $self = shift;
672	$self->push_read (line => @_);
673	}
674
675	sub unshift_read_line {
676	my $self = shift;
677	$self->unshift_read (line => @_);
678	}
679
680	=item netstring => $cb->($string)	1353	=item netstring => $cb->($handle, $string)
681		1354
682	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).	1355	A netstring (http://cr.yp.to/proto/netstrings.txt, this is not an endorsement).
683		1356
684	Throws an error with C<$!> set to EBADMSG on format violations.	1357	Throws an error with C<$!> set to EBADMSG on format violations.
685		1358
…		…
689	my ($self, $cb) = @_;	1362	my ($self, $cb) = @_;
690		1363
691	sub {	1364	sub {
692	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {	1365	unless ($_[0]{rbuf} =~ s/^(0|[1-9][0-9]*)://) {
693	if ($_[0]{rbuf} =~ /[^0-9]/) {	1366	if ($_[0]{rbuf} =~ /[^0-9]/) {
694	$! = &Errno::EBADMSG;	1367	$self->_error (Errno::EBADMSG);
695	$self->error;
696	}	1368	}
697	return;	1369	return;
698	}	1370	}
699		1371
700	my $len = $1;	1372	my $len = $1;
…		…
703	my $string = $_[1];	1375	my $string = $_[1];
704	$_[0]->unshift_read (chunk => 1, sub {	1376	$_[0]->unshift_read (chunk => 1, sub {
705	if ($_[1] eq ",") {	1377	if ($_[1] eq ",") {
706	$cb->($_[0], $string);	1378	$cb->($_[0], $string);
707	} else {	1379	} else {
708	$! = &Errno::EBADMSG;
709	$self->error;	1380	$self->_error (Errno::EBADMSG);
710	}	1381	}
711	});	1382	});
712	});	1383	});
713		1384
714	1	1385	1
715	}	1386	}
716	};	1387	};
717		1388
		1389	=item packstring => $format, $cb->($handle, $string)
		1390
		1391	An octet string prefixed with an encoded length. The encoding C<$format>
		1392	uses the same format as a Perl C<pack> format, but must specify a single
		1393	integer only (only one of C<cCsSlLqQiInNvVjJw> is allowed, plus an
		1394	optional C<!>, C<< < >> or C<< > >> modifier).
		1395
		1396	For example, DNS over TCP uses a prefix of C<n> (2 octet network order),
		1397	EPP uses a prefix of C<N> (4 octtes).
		1398
		1399	Example: read a block of data prefixed by its length in BER-encoded
		1400	format (very efficient).
		1401
		1402	$handle->push_read (packstring => "w", sub {
		1403	my ($handle, $data) = @_;
		1404	});
		1405
		1406	=cut
		1407
		1408	register_read_type packstring => sub {
		1409	my ($self, $cb, $format) = @_;
		1410
		1411	sub {
		1412	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1413	defined (my $len = eval { unpack $format, $_[0]{rbuf} })
		1414	or return;
		1415
		1416	$format = length pack $format, $len;
		1417
		1418	# bypass unshift if we already have the remaining chunk
		1419	if ($format + $len <= length $_[0]{rbuf}) {
		1420	my $data = substr $_[0]{rbuf}, $format, $len;
		1421	substr $_[0]{rbuf}, 0, $format + $len, "";
		1422	$cb->($_[0], $data);
		1423	} else {
		1424	# remove prefix
		1425	substr $_[0]{rbuf}, 0, $format, "";
		1426
		1427	# read remaining chunk
		1428	$_[0]->unshift_read (chunk => $len, $cb);
		1429	}
		1430
		1431	1
		1432	}
		1433	};
		1434
		1435	=item json => $cb->($handle, $hash_or_arrayref)
		1436
		1437	Reads a JSON object or array, decodes it and passes it to the
		1438	callback. When a parse error occurs, an C<EBADMSG> error will be raised.
		1439
		1440	If a C<json> object was passed to the constructor, then that will be used
		1441	for the final decode, otherwise it will create a JSON coder expecting UTF-8.
		1442
		1443	This read type uses the incremental parser available with JSON version
		1444	2.09 (and JSON::XS version 2.2) and above. You have to provide a
		1445	dependency on your own: this module will load the JSON module, but
		1446	AnyEvent does not depend on it itself.
		1447
		1448	Since JSON texts are fully self-delimiting, the C<json> read and write
		1449	types are an ideal simple RPC protocol: just exchange JSON datagrams. See
		1450	the C<json> write type description, above, for an actual example.
		1451
		1452	=cut
		1453
		1454	register_read_type json => sub {
		1455	my ($self, $cb) = @_;
		1456
		1457	my $json = $self->{json} ||= json_coder;
		1458
		1459	my $data;
		1460	my $rbuf = \$self->{rbuf};
		1461
		1462	sub {
		1463	my $ref = eval { $json->incr_parse ($self->{rbuf}) };
		1464
		1465	if ($ref) {
		1466	$self->{rbuf} = $json->incr_text;
		1467	$json->incr_text = "";
		1468	$cb->($self, $ref);
		1469
		1470	1
		1471	} elsif ($@) {
		1472	# error case
		1473	$json->incr_skip;
		1474
		1475	$self->{rbuf} = $json->incr_text;
		1476	$json->incr_text = "";
		1477
		1478	$self->_error (Errno::EBADMSG);
		1479
		1480	()
		1481	} else {
		1482	$self->{rbuf} = "";
		1483
		1484	()
		1485	}
		1486	}
		1487	};
		1488
		1489	=item storable => $cb->($handle, $ref)
		1490
		1491	Deserialises a L<Storable> frozen representation as written by the
		1492	C<storable> write type (BER-encoded length prefix followed by nfreeze'd
		1493	data).
		1494
		1495	Raises C<EBADMSG> error if the data could not be decoded.
		1496
		1497	=cut
		1498
		1499	register_read_type storable => sub {
		1500	my ($self, $cb) = @_;
		1501
		1502	require Storable;
		1503
		1504	sub {
		1505	# when we can use 5.10 we can use ".", but for 5.8 we use the re-pack method
		1506	defined (my $len = eval { unpack "w", $_[0]{rbuf} })
		1507	or return;
		1508
		1509	my $format = length pack "w", $len;
		1510
		1511	# bypass unshift if we already have the remaining chunk
		1512	if ($format + $len <= length $_[0]{rbuf}) {
		1513	my $data = substr $_[0]{rbuf}, $format, $len;
		1514	substr $_[0]{rbuf}, 0, $format + $len, "";
		1515	$cb->($_[0], Storable::thaw ($data));
		1516	} else {
		1517	# remove prefix
		1518	substr $_[0]{rbuf}, 0, $format, "";
		1519
		1520	# read remaining chunk
		1521	$_[0]->unshift_read (chunk => $len, sub {
		1522	if (my $ref = eval { Storable::thaw ($_[1]) }) {
		1523	$cb->($_[0], $ref);
		1524	} else {
		1525	$self->_error (Errno::EBADMSG);
		1526	}
		1527	});
		1528	}
		1529
		1530	1
		1531	}
		1532	};
		1533
718	=back	1534	=back
719		1535
		1536	=item AnyEvent::Handle::register_read_type type => $coderef->($handle, $cb, @args)
		1537
		1538	This function (not method) lets you add your own types to C<push_read>.
		1539
		1540	Whenever the given C<type> is used, C<push_read> will invoke the code
		1541	reference with the handle object, the callback and the remaining
		1542	arguments.
		1543
		1544	The code reference is supposed to return a callback (usually a closure)
		1545	that works as a plain read callback (see C<< ->push_read ($cb) >>).
		1546
		1547	It should invoke the passed callback when it is done reading (remember to
		1548	pass C<$handle> as first argument as all other callbacks do that).
		1549
		1550	Note that this is a function, and all types registered this way will be
		1551	global, so try to use unique names.
		1552
		1553	For examples, see the source of this module (F<perldoc -m AnyEvent::Handle>,
		1554	search for C<register_read_type>)).
		1555
720	=item $handle->stop_read	1556	=item $handle->stop_read
721		1557
722	=item $handle->start_read	1558	=item $handle->start_read
723		1559
724	In rare cases you actually do not want to read anything from the	1560	In rare cases you actually do not want to read anything from the
725	socket. In this case you can call C<stop_read>. Neither C<on_read> no	1561	socket. In this case you can call C<stop_read>. Neither C<on_read> nor
726	any queued callbacks will be executed then. To start reading again, call	1562	any queued callbacks will be executed then. To start reading again, call
727	C<start_read>.	1563	C<start_read>.
728		1564
		1565	Note that AnyEvent::Handle will automatically C<start_read> for you when
		1566	you change the C<on_read> callback or push/unshift a read callback, and it
		1567	will automatically C<stop_read> for you when neither C<on_read> is set nor
		1568	there are any read requests in the queue.
		1569
		1570	These methods will have no effect when in TLS mode (as TLS doesn't support
		1571	half-duplex connections).
		1572
729	=cut	1573	=cut
730		1574
731	sub stop_read {	1575	sub stop_read {
732	my ($self) = @_;	1576	my ($self) = @_;
733		1577
734	delete $self->{rw};	1578	delete $self->{_rw} unless $self->{tls};
735	}	1579	}
736		1580
737	sub start_read {	1581	sub start_read {
738	my ($self) = @_;	1582	my ($self) = @_;
739		1583
740	unless ($self->{rw} || $self->{eof}) {	1584	unless ($self->{_rw} || $self->{_eof}) {
741	Scalar::Util::weaken $self;	1585	Scalar::Util::weaken $self;
742		1586
743	$self->{rw} = AnyEvent->io (fh => $self->{fh}, poll => "r", cb => sub {	1587	$self->{_rw} = AE::io $self->{fh}, 0, sub {
744	my $rbuf = $self->{filter_r} ? \my $buf : \$self->{rbuf};	1588	my $rbuf = \($self->{tls} ? my $buf : $self->{rbuf});
745	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;	1589	my $len = sysread $self->{fh}, $$rbuf, $self->{read_size} || 8192, length $$rbuf;
746		1590
747	if ($len > 0) {	1591	if ($len > 0) {
748	$self->{filter_r}	1592	$self->{_activity} = $self->{_ractivity} = AE::now;
749	? $self->{filter_r}->($self, $rbuf)	1593
		1594	if ($self->{tls}) {
		1595	Net::SSLeay::BIO_write ($self->{_rbio}, $$rbuf);
		1596
		1597	&_dotls ($self);
		1598	} else {
750	: $self->_drain_rbuf;	1599	$self->_drain_rbuf;
		1600	}
751		1601
752	} elsif (defined $len) {	1602	} elsif (defined $len) {
753	delete $self->{rw};	1603	delete $self->{_rw};
754	$self->{eof} = 1;	1604	$self->{_eof} = 1;
755	$self->_drain_rbuf;	1605	$self->_drain_rbuf;
756		1606
757	} elsif ($! != EAGAIN && $! != EINTR) {	1607	} elsif ($! != EAGAIN && $! != EINTR && $! != WSAEWOULDBLOCK) {
758	return $self->error;	1608	return $self->_error ($!, 1);
759	}	1609	}
760	});	1610	};
761	}	1611	}
762	}	1612	}
763		1613
		1614	our $ERROR_SYSCALL;
		1615	our $ERROR_WANT_READ;
		1616
		1617	sub _tls_error {
		1618	my ($self, $err) = @_;
		1619
		1620	return $self->_error ($!, 1)
		1621	if $err == Net::SSLeay::ERROR_SYSCALL ();
		1622
		1623	my $err =Net::SSLeay::ERR_error_string (Net::SSLeay::ERR_get_error ());
		1624
		1625	# reduce error string to look less scary
		1626	$err =~ s/^error:[0-9a-fA-F]{8}:[^:]+:([^:]+):/\L$1: /;
		1627
		1628	if ($self->{_on_starttls}) {
		1629	(delete $self->{_on_starttls})->($self, undef, $err);
		1630	&_freetls;
		1631	} else {
		1632	&_freetls;
		1633	$self->_error (Errno::EPROTO, 1, $err);
		1634	}
		1635	}
		1636
		1637	# poll the write BIO and send the data if applicable
		1638	# also decode read data if possible
		1639	# this is basiclaly our TLS state machine
		1640	# more efficient implementations are possible with openssl,
		1641	# but not with the buggy and incomplete Net::SSLeay.
764	sub _dotls {	1642	sub _dotls {
765	my ($self) = @_;	1643	my ($self) = @_;
766		1644
		1645	my $tmp;
		1646
767	if (length $self->{tls_wbuf}) {	1647	if (length $self->{_tls_wbuf}) {
768	while ((my $len = Net::SSLeay::write ($self->{tls}, $self->{tls_wbuf})) > 0) {	1648	while (($tmp = Net::SSLeay::write ($self->{tls}, $self->{_tls_wbuf})) > 0) {
769	substr $self->{tls_wbuf}, 0, $len, "";	1649	substr $self->{_tls_wbuf}, 0, $tmp, "";
770	}	1650	}
771	}
772		1651
		1652	$tmp = Net::SSLeay::get_error ($self->{tls}, $tmp);
		1653	return $self->_tls_error ($tmp)
		1654	if $tmp != $ERROR_WANT_READ
		1655	&& ($tmp != $ERROR_SYSCALL || $!);
		1656	}
		1657
773	if (defined (my $buf = Net::SSLeay::BIO_read ($self->{tls_wbio}))) {	1658	while (defined ($tmp = Net::SSLeay::read ($self->{tls}))) {
		1659	unless (length $tmp) {
		1660	$self->{_on_starttls}
		1661	and (delete $self->{_on_starttls})->($self, undef, "EOF during handshake"); # ???
		1662	&_freetls;
		1663
		1664	if ($self->{on_stoptls}) {
		1665	$self->{on_stoptls}($self);
		1666	return;
		1667	} else {
		1668	# let's treat SSL-eof as we treat normal EOF
		1669	delete $self->{_rw};
		1670	$self->{_eof} = 1;
		1671	}
		1672	}
		1673
		1674	$self->{_tls_rbuf} .= $tmp;
		1675	$self->_drain_rbuf;
		1676	$self->{tls} or return; # tls session might have gone away in callback
		1677	}
		1678
		1679	$tmp = Net::SSLeay::get_error ($self->{tls}, -1);
		1680	return $self->_tls_error ($tmp)
		1681	if $tmp != $ERROR_WANT_READ
		1682	&& ($tmp != $ERROR_SYSCALL || $!);
		1683
		1684	while (length ($tmp = Net::SSLeay::BIO_read ($self->{_wbio}))) {
774	$self->{wbuf} .= $buf;	1685	$self->{wbuf} .= $tmp;
775	$self->_drain_wbuf;	1686	$self->_drain_wbuf;
776	}	1687	}
777		1688
778	while (defined (my $buf = Net::SSLeay::read ($self->{tls}))) {	1689	$self->{_on_starttls}
779	$self->{rbuf} .= $buf;	1690	and Net::SSLeay::state ($self->{tls}) == Net::SSLeay::ST_OK ()
780	$self->_drain_rbuf;	1691	and (delete $self->{_on_starttls})->($self, 1, "TLS/SSL connection established");
781	}
782
783	my $err = Net::SSLeay::get_error ($self->{tls}, -1);
784
785	if ($err!= Net::SSLeay::ERROR_WANT_READ ()) {
786	if ($err == Net::SSLeay::ERROR_SYSCALL ()) {
787	$self->error;
788	} elsif ($err == Net::SSLeay::ERROR_SSL ()) {
789	$! = &Errno::EIO;
790	$self->error;
791	}
792
793	# all others are fine for our purposes
794	}
795	}	1692	}
796		1693
797	=item $handle->starttls ($tls[, $tls_ctx])	1694	=item $handle->starttls ($tls[, $tls_ctx])
798		1695
799	Instead of starting TLS negotiation immediately when the AnyEvent::Handle	1696	Instead of starting TLS negotiation immediately when the AnyEvent::Handle
800	object is created, you can also do that at a later time by calling	1697	object is created, you can also do that at a later time by calling
801	C<starttls>.	1698	C<starttls>.
802		1699
		1700	Starting TLS is currently an asynchronous operation - when you push some
		1701	write data and then call C<< ->starttls >> then TLS negotiation will start
		1702	immediately, after which the queued write data is then sent.
		1703
803	The first argument is the same as the C<tls> constructor argument (either	1704	The first argument is the same as the C<tls> constructor argument (either
804	C<"connect">, C<"accept"> or an existing Net::SSLeay object).	1705	C<"connect">, C<"accept"> or an existing Net::SSLeay object).
805		1706
806	The second argument is the optional C<Net::SSLeay::CTX> object that is	1707	The second argument is the optional C<AnyEvent::TLS> object that is used
807	used when AnyEvent::Handle has to create its own TLS connection object.	1708	when AnyEvent::Handle has to create its own TLS connection object, or
		1709	a hash reference with C<< key => value >> pairs that will be used to
		1710	construct a new context.
808		1711
809	=cut	1712	The TLS connection object will end up in C<< $handle->{tls} >>, the TLS
		1713	context in C<< $handle->{tls_ctx} >> after this call and can be used or
		1714	changed to your liking. Note that the handshake might have already started
		1715	when this function returns.
810		1716
811	# TODO: maybe document...	1717	Due to bugs in OpenSSL, it might or might not be possible to do multiple
		1718	handshakes on the same stream. Best do not attempt to use the stream after
		1719	stopping TLS.
		1720
		1721	=cut
		1722
		1723	our %TLS_CACHE; #TODO not yet documented, should we?
		1724
812	sub starttls {	1725	sub starttls {
813	my ($self, $ssl, $ctx) = @_;	1726	my ($self, $tls, $ctx) = @_;
814		1727
815	$self->stoptls;	1728	Carp::croak "It is an error to call starttls on an AnyEvent::Handle object while TLS is already active, caught"
		1729	if $self->{tls};
816		1730
817	if ($ssl eq "accept") {	1731	$self->{tls} = $tls;
818	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1732	$self->{tls_ctx} = $ctx if @_ > 2;
819	Net::SSLeay::set_accept_state ($ssl);	1733
820	} elsif ($ssl eq "connect") {	1734	return unless $self->{fh};
821	$ssl = Net::SSLeay::new ($ctx || TLS_CTX ());	1735
822	Net::SSLeay::set_connect_state ($ssl);	1736	require Net::SSLeay;
		1737
		1738	$ERROR_SYSCALL = Net::SSLeay::ERROR_SYSCALL ();
		1739	$ERROR_WANT_READ = Net::SSLeay::ERROR_WANT_READ ();
		1740
		1741	$tls = delete $self->{tls};
		1742	$ctx = $self->{tls_ctx};
		1743
		1744	local $Carp::CarpLevel = 1; # skip ourselves when creating a new context or session
		1745
		1746	if ("HASH" eq ref $ctx) {
		1747	require AnyEvent::TLS;
		1748
		1749	if ($ctx->{cache}) {
		1750	my $key = $ctx+0;
		1751	$ctx = $TLS_CACHE{$key} ||= new AnyEvent::TLS %$ctx;
		1752	} else {
		1753	$ctx = new AnyEvent::TLS %$ctx;
		1754	}
		1755	}
823	}	1756
824		1757	$self->{tls_ctx} = $ctx || TLS_CTX ();
825	$self->{tls} = $ssl;	1758	$self->{tls} = $tls = $self->{tls_ctx}->_get_session ($tls, $self, $self->{peername});
826		1759
827	# basically, this is deep magic (because SSL_read should have the same issues)	1760	# basically, this is deep magic (because SSL_read should have the same issues)
828	# but the openssl maintainers basically said: "trust us, it just works".	1761	# but the openssl maintainers basically said: "trust us, it just works".
829	# (unfortunately, we have to hardcode constants because the abysmally misdesigned	1762	# (unfortunately, we have to hardcode constants because the abysmally misdesigned
830	# and mismaintained ssleay-module doesn't even offer them).	1763	# and mismaintained ssleay-module doesn't even offer them).
831	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html	1764	# http://www.mail-archive.com/openssl-dev@openssl.org/msg22420.html
		1765	#
		1766	# in short: this is a mess.
		1767	#
		1768	# note that we do not try to keep the length constant between writes as we are required to do.
		1769	# we assume that most (but not all) of this insanity only applies to non-blocking cases,
		1770	# and we drive openssl fully in blocking mode here. Or maybe we don't - openssl seems to
		1771	# have identity issues in that area.
832	Net::SSLeay::CTX_set_mode ($self->{tls},	1772	# Net::SSLeay::CTX_set_mode ($ssl,
833	(eval { Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)	1773	# (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ENABLE_PARTIAL_WRITE () } || 1)
834	| (eval { Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));	1774	# | (eval { local $SIG{__DIE__}; Net::SSLeay::MODE_ACCEPT_MOVING_WRITE_BUFFER () } || 2));
		1775	Net::SSLeay::CTX_set_mode ($tls, 1|2);
835		1776
836	$self->{tls_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1777	$self->{_rbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
837	$self->{tls_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());	1778	$self->{_wbio} = Net::SSLeay::BIO_new (Net::SSLeay::BIO_s_mem ());
838		1779
		1780	Net::SSLeay::BIO_write ($self->{_rbio}, delete $self->{rbuf});
		1781
839	Net::SSLeay::set_bio ($ssl, $self->{tls_rbio}, $self->{tls_wbio});	1782	Net::SSLeay::set_bio ($tls, $self->{_rbio}, $self->{_wbio});
840		1783
841	$self->{filter_w} = sub {	1784	$self->{_on_starttls} = sub { $_[0]{on_starttls}(@_) }
842	$_[0]{tls_wbuf} .= ${$_[1]};	1785	if $self->{on_starttls};
843	&_dotls;	1786
844	};	1787	&_dotls; # need to trigger the initial handshake
845	$self->{filter_r} = sub {	1788	$self->start_read; # make sure we actually do read
846	Net::SSLeay::BIO_write ($_[0]{tls_rbio}, ${$_[1]});
847	&_dotls;
848	};
849	}	1789	}
850		1790
851	=item $handle->stoptls	1791	=item $handle->stoptls
852		1792
853	Destroys the SSL connection, if any. Partial read or write data will be	1793	Shuts down the SSL connection - this makes a proper EOF handshake by
854	lost.	1794	sending a close notify to the other side, but since OpenSSL doesn't
		1795	support non-blocking shut downs, it is not guarenteed that you can re-use
		1796	the stream afterwards.
855		1797
856	=cut	1798	=cut
857		1799
858	sub stoptls {	1800	sub stoptls {
859	my ($self) = @_;	1801	my ($self) = @_;
860		1802
861	Net::SSLeay::free (delete $self->{tls}) if $self->{tls};	1803	if ($self->{tls}) {
862	delete $self->{tls_rbio};	1804	Net::SSLeay::shutdown ($self->{tls});
863	delete $self->{tls_wbio};	1805
864	delete $self->{tls_wbuf};	1806	&_dotls;
865	delete $self->{filter_r};	1807
866	delete $self->{filter_w};	1808	# # we don't give a shit. no, we do, but we can't. no...#d#
		1809	# # we, we... have to use openssl :/#d#
		1810	# &_freetls;#d#
		1811	}
		1812	}
		1813
		1814	sub _freetls {
		1815	my ($self) = @_;
		1816
		1817	return unless $self->{tls};
		1818
		1819	$self->{tls_ctx}->_put_session (delete $self->{tls})
		1820	if $self->{tls} > 0;
		1821
		1822	delete @$self{qw(_rbio _wbio _tls_wbuf _on_starttls)};
867	}	1823	}
868		1824
869	sub DESTROY {	1825	sub DESTROY {
870	my $self = shift;	1826	my ($self) = @_;
871		1827
872	$self->stoptls;	1828	&_freetls;
		1829
		1830	my $linger = exists $self->{linger} ? $self->{linger} : 3600;
		1831
		1832	if ($linger && length $self->{wbuf} && $self->{fh}) {
		1833	my $fh = delete $self->{fh};
		1834	my $wbuf = delete $self->{wbuf};
		1835
		1836	my @linger;
		1837
		1838	push @linger, AE::io $fh, 1, sub {
		1839	my $len = syswrite $fh, $wbuf, length $wbuf;
		1840
		1841	if ($len > 0) {
		1842	substr $wbuf, 0, $len, "";
		1843	} else {
		1844	@linger = (); # end
		1845	}
		1846	};
		1847	push @linger, AE::timer $linger, 0, sub {
		1848	@linger = ();
		1849	};
		1850	}
		1851	}
		1852
		1853	=item $handle->destroy
		1854
		1855	Shuts down the handle object as much as possible - this call ensures that
		1856	no further callbacks will be invoked and as many resources as possible
		1857	will be freed. Any method you will call on the handle object after
		1858	destroying it in this way will be silently ignored (and it will return the
		1859	empty list).
		1860
		1861	Normally, you can just "forget" any references to an AnyEvent::Handle
		1862	object and it will simply shut down. This works in fatal error and EOF
		1863	callbacks, as well as code outside. It does I<NOT> work in a read or write
		1864	callback, so when you want to destroy the AnyEvent::Handle object from
		1865	within such an callback. You I<MUST> call C<< ->destroy >> explicitly in
		1866	that case.
		1867
		1868	Destroying the handle object in this way has the advantage that callbacks
		1869	will be removed as well, so if those are the only reference holders (as
		1870	is common), then one doesn't need to do anything special to break any
		1871	reference cycles.
		1872
		1873	The handle might still linger in the background and write out remaining
		1874	data, as specified by the C<linger> option, however.
		1875
		1876	=cut
		1877
		1878	sub destroy {
		1879	my ($self) = @_;
		1880
		1881	$self->DESTROY;
		1882	%$self = ();
		1883	bless $self, "AnyEvent::Handle::destroyed";
		1884	}
		1885
		1886	sub AnyEvent::Handle::destroyed::AUTOLOAD {
		1887	#nop
873	}	1888	}
874		1889
875	=item AnyEvent::Handle::TLS_CTX	1890	=item AnyEvent::Handle::TLS_CTX
876		1891
877	This function creates and returns the Net::SSLeay::CTX object used by	1892	This function creates and returns the AnyEvent::TLS object used by default
878	default for TLS mode.	1893	for TLS mode.
879		1894
880	The context is created like this:	1895	The context is created by calling L<AnyEvent::TLS> without any arguments.
881
882	Net::SSLeay::load_error_strings;
883	Net::SSLeay::SSLeay_add_ssl_algorithms;
884	Net::SSLeay::randomize;
885
886	my $CTX = Net::SSLeay::CTX_new;
887
888	Net::SSLeay::CTX_set_options $CTX, Net::SSLeay::OP_ALL
889		1896
890	=cut	1897	=cut
891		1898
892	our $TLS_CTX;	1899	our $TLS_CTX;
893		1900
894	sub TLS_CTX() {	1901	sub TLS_CTX() {
895	$TLS_CTX || do {	1902	$TLS_CTX ||= do {
896	require Net::SSLeay;	1903	require AnyEvent::TLS;
897		1904
898	Net::SSLeay::load_error_strings ();	1905	new AnyEvent::TLS
899	Net::SSLeay::SSLeay_add_ssl_algorithms ();
900	Net::SSLeay::randomize ();
901
902	$TLS_CTX = Net::SSLeay::CTX_new ();
903
904	Net::SSLeay::CTX_set_options ($TLS_CTX, Net::SSLeay::OP_ALL ());
905
906	$TLS_CTX
907	}	1906	}
908	}	1907	}
909		1908
910	=back	1909	=back
911		1910
		1911
		1912	=head1 NONFREQUENTLY ASKED QUESTIONS
		1913
		1914	=over 4
		1915
		1916	=item I C<undef> the AnyEvent::Handle reference inside my callback and
		1917	still get further invocations!
		1918
		1919	That's because AnyEvent::Handle keeps a reference to itself when handling
		1920	read or write callbacks.
		1921
		1922	It is only safe to "forget" the reference inside EOF or error callbacks,
		1923	from within all other callbacks, you need to explicitly call the C<<
		1924	->destroy >> method.
		1925
		1926	=item I get different callback invocations in TLS mode/Why can't I pause
		1927	reading?
		1928
		1929	Unlike, say, TCP, TLS connections do not consist of two independent
		1930	communication channels, one for each direction. Or put differently. The
		1931	read and write directions are not independent of each other: you cannot
		1932	write data unless you are also prepared to read, and vice versa.
		1933
		1934	This can mean than, in TLS mode, you might get C<on_error> or C<on_eof>
		1935	callback invocations when you are not expecting any read data - the reason
		1936	is that AnyEvent::Handle always reads in TLS mode.
		1937
		1938	During the connection, you have to make sure that you always have a
		1939	non-empty read-queue, or an C<on_read> watcher. At the end of the
		1940	connection (or when you no longer want to use it) you can call the
		1941	C<destroy> method.
		1942
		1943	=item How do I read data until the other side closes the connection?
		1944
		1945	If you just want to read your data into a perl scalar, the easiest way
		1946	to achieve this is by setting an C<on_read> callback that does nothing,
		1947	clearing the C<on_eof> callback and in the C<on_error> callback, the data
		1948	will be in C<$_[0]{rbuf}>:
		1949
		1950	$handle->on_read (sub { });
		1951	$handle->on_eof (undef);
		1952	$handle->on_error (sub {
		1953	my $data = delete $_[0]{rbuf};
		1954	});
		1955
		1956	The reason to use C<on_error> is that TCP connections, due to latencies
		1957	and packets loss, might get closed quite violently with an error, when in
		1958	fact, all data has been received.
		1959
		1960	It is usually better to use acknowledgements when transferring data,
		1961	to make sure the other side hasn't just died and you got the data
		1962	intact. This is also one reason why so many internet protocols have an
		1963	explicit QUIT command.
		1964
		1965	=item I don't want to destroy the handle too early - how do I wait until
		1966	all data has been written?
		1967
		1968	After writing your last bits of data, set the C<on_drain> callback
		1969	and destroy the handle in there - with the default setting of
		1970	C<low_water_mark> this will be called precisely when all data has been
		1971	written to the socket:
		1972
		1973	$handle->push_write (...);
		1974	$handle->on_drain (sub {
		1975	warn "all data submitted to the kernel\n";
		1976	undef $handle;
		1977	});
		1978
		1979	If you just want to queue some data and then signal EOF to the other side,
		1980	consider using C<< ->push_shutdown >> instead.
		1981
		1982	=item I want to contact a TLS/SSL server, I don't care about security.
		1983
		1984	If your TLS server is a pure TLS server (e.g. HTTPS) that only speaks TLS,
		1985	simply connect to it and then create the AnyEvent::Handle with the C<tls>
		1986	parameter:
		1987
		1988	tcp_connect $host, $port, sub {
		1989	my ($fh) = @_;
		1990
		1991	my $handle = new AnyEvent::Handle
		1992	fh => $fh,
		1993	tls => "connect",
		1994	on_error => sub { ... };
		1995
		1996	$handle->push_write (...);
		1997	};
		1998
		1999	=item I want to contact a TLS/SSL server, I do care about security.
		2000
		2001	Then you should additionally enable certificate verification, including
		2002	peername verification, if the protocol you use supports it (see
		2003	L<AnyEvent::TLS>, C<verify_peername>).
		2004
		2005	E.g. for HTTPS:
		2006
		2007	tcp_connect $host, $port, sub {
		2008	my ($fh) = @_;
		2009
		2010	my $handle = new AnyEvent::Handle
		2011	fh => $fh,
		2012	peername => $host,
		2013	tls => "connect",
		2014	tls_ctx => { verify => 1, verify_peername => "https" },
		2015	...
		2016
		2017	Note that you must specify the hostname you connected to (or whatever
		2018	"peername" the protocol needs) as the C<peername> argument, otherwise no
		2019	peername verification will be done.
		2020
		2021	The above will use the system-dependent default set of trusted CA
		2022	certificates. If you want to check against a specific CA, add the
		2023	C<ca_file> (or C<ca_cert>) arguments to C<tls_ctx>:
		2024
		2025	tls_ctx => {
		2026	verify => 1,
		2027	verify_peername => "https",
		2028	ca_file => "my-ca-cert.pem",
		2029	},
		2030
		2031	=item I want to create a TLS/SSL server, how do I do that?
		2032
		2033	Well, you first need to get a server certificate and key. You have
		2034	three options: a) ask a CA (buy one, use cacert.org etc.) b) create a
		2035	self-signed certificate (cheap. check the search engine of your choice,
		2036	there are many tutorials on the net) or c) make your own CA (tinyca2 is a
		2037	nice program for that purpose).
		2038
		2039	Then create a file with your private key (in PEM format, see
		2040	L<AnyEvent::TLS>), followed by the certificate (also in PEM format). The
		2041	file should then look like this:
		2042
		2043	-----BEGIN RSA PRIVATE KEY-----
		2044	...header data
		2045	... lots of base64'y-stuff
		2046	-----END RSA PRIVATE KEY-----
		2047
		2048	-----BEGIN CERTIFICATE-----
		2049	... lots of base64'y-stuff
		2050	-----END CERTIFICATE-----
		2051
		2052	The important bits are the "PRIVATE KEY" and "CERTIFICATE" parts. Then
		2053	specify this file as C<cert_file>:
		2054
		2055	tcp_server undef, $port, sub {
		2056	my ($fh) = @_;
		2057
		2058	my $handle = new AnyEvent::Handle
		2059	fh => $fh,
		2060	tls => "accept",
		2061	tls_ctx => { cert_file => "my-server-keycert.pem" },
		2062	...
		2063
		2064	When you have intermediate CA certificates that your clients might not
		2065	know about, just append them to the C<cert_file>.
		2066
		2067	=back
		2068
		2069
		2070	=head1 SUBCLASSING AnyEvent::Handle
		2071
		2072	In many cases, you might want to subclass AnyEvent::Handle.
		2073
		2074	To make this easier, a given version of AnyEvent::Handle uses these
		2075	conventions:
		2076
		2077	=over 4
		2078
		2079	=item * all constructor arguments become object members.
		2080
		2081	At least initially, when you pass a C<tls>-argument to the constructor it
		2082	will end up in C<< $handle->{tls} >>. Those members might be changed or
		2083	mutated later on (for example C<tls> will hold the TLS connection object).
		2084
		2085	=item * other object member names are prefixed with an C<_>.
		2086
		2087	All object members not explicitly documented (internal use) are prefixed
		2088	with an underscore character, so the remaining non-C<_>-namespace is free
		2089	for use for subclasses.
		2090
		2091	=item * all members not documented here and not prefixed with an underscore
		2092	are free to use in subclasses.
		2093
		2094	Of course, new versions of AnyEvent::Handle may introduce more "public"
		2095	member variables, but thats just life, at least it is documented.
		2096
		2097	=back
		2098
912	=head1 AUTHOR	2099	=head1 AUTHOR
913		2100
914	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.	2101	Robin Redeker C<< <elmex at ta-sa.org> >>, Marc Lehmann <schmorp@schmorp.de>.
915		2102
916	=cut	2103	=cut

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines