App-Staticperl/staticperl.pod

=head1 NAME

staticperl - perl, libc, 100 modules, all in one 500kb file

=head1 SYNOPSIS

   staticperl help      # print the embedded documentation
   staticperl fetch     # fetch and unpack perl sources
   staticperl configure # fetch and then configure perl
   staticperl build     # configure and then build perl
   staticperl install   # build and then install perl
   staticperl clean     # clean most intermediate files (restart at configure)
   staticperl distclean # delete everything installed by this script
   staticperl cpan      # invoke CPAN shell
   staticperl instmod path...        # install unpacked modules
   staticperl instcpan modulename... # install modules from CPAN
   staticperl mkbundle <bundle-args...> # see documentation
   staticperl mkperl <bundle-args...>   # see documentation
   staticperl mkapp appname <bundle-args...> # see documentation

Typical Examples:

   staticperl install   # fetch, configure, build and install perl
   staticperl cpan      # run interactive cpan shell
   staticperl mkperl -M '"Config_heavy.pl"' # build a perl that supports -V
   staticperl mkperl -MAnyEvent::Impl::Perl -MAnyEvent::HTTPD -MURI -MURI::http
                        # build a perl with the above modules linked in
   staticperl mkapp myapp --boot mainprog mymodules
                        # build a binary "myapp" from mainprog and mymodules

=head1 DESCRIPTION

This script helps you to create single-file perl interpreters
or applications, or embedding a perl interpreter in your
applications. Single-file means that it is fully self-contained - no
separate shared objects, no autoload fragments, no .pm or .pl files are
needed. And when linking statically, you can create (or embed) a single
file that contains perl interpreter, libc, all the modules you need, all
the libraries you need and of course your actual program.

With F<uClibc> and F<upx> on x86, you can create a single 500kb binary
that contains perl and 100 modules such as POSIX, AnyEvent, EV, IO::AIO,
Coro and so on. Or any other choice of modules.

To see how this turns out, you can try out smallperl and bigperl, two
pre-built static and compressed perl binaries with many and even more
modules: just follow the links at L<http://staticperl.schmorp.de/>.

The created files do not need write access to the file system (like PAR
does). In fact, since this script is in many ways similar to PAR::Packer,
here are the differences:

=over 4

=item * The generated executables are much smaller than PAR created ones.

Shared objects and the perl binary contain a lot of extra info, while
the static nature of F<staticperl> allows the linker to remove all
functionality and meta-info not required by the final executable. Even
extensions statically compiled into perl at build time will only be
present in the final executable when needed.

In addition, F<staticperl> can strip perl sources much more effectively
than PAR.

=item * The generated executables start much faster.

There is no need to unpack files, or even to parse Zip archives (which is
slow and memory-consuming business).

=item * The generated executables don't need a writable filesystem.

F<staticperl> loads all required files directly from memory. There is no
need to unpack files into a temporary directory.

=item * More control over included files, more burden.

PAR tries to be maintenance and hassle-free - it tries to include more
files than necessary to make sure everything works out of the box. It
mostly succeeds at this, but he extra files (such as the unicode database)
can take substantial amounts of memory and file size.

With F<staticperl>, the burden is mostly with the developer - only direct
compile-time dependencies and L<AutoLoader> are handled automatically.
This means the modules to include often need to be tweaked manually.

All this does not preclude more permissive modes to be implemented in
the future, but right now, you have to resolve state hidden dependencies
manually.

=item * PAR works out of the box, F<staticperl> does not.

Maintaining your own custom perl build can be a pain in the ass, and while
F<staticperl> tries to make this easy, it still requires a custom perl
build and possibly fiddling with some modules. PAR is likely to produce
results faster.

Ok, PAR never has worked for me out of the box, and for some people,
F<staticperl> does work out of the box, as they don't count "fiddling with
module use lists" against it, but nevertheless, F<staticperl> is certainly
a bit more difficult to use.

=back

=head1 HOW DOES IT WORK?

Simple: F<staticperl> downloads, compile and installs a perl version of
your choice in F<~/.staticperl>. You can add extra modules either by
letting F<staticperl> install them for you automatically, or by using CPAN
and doing it interactively. This usually takes 5-10 minutes, depending on
the speed of your computer and your internet connection.

It is possible to do program development at this stage, too.

Afterwards, you create a list of files and modules you want to include,
and then either build a new perl binary (that acts just like a normal perl
except everything is compiled in), or you create bundle files (basically C
sources you can use to embed all files into your project).

This step is very fast (a few seconds if PPI is not used for stripping, or
the stripped files are in the cache), and can be tweaked and repeated as
often as necessary.

=head1 THE F<STATICPERL> SCRIPT

This module installs a script called F<staticperl> into your perl
binary directory. The script is fully self-contained, and can be
used without perl (for example, in an uClibc chroot environment). In
fact, it can be extracted from the C<App::Staticperl> distribution
tarball as F<bin/staticperl>, without any installation. The
newest (possibly alpha) version can also be downloaded from
L<http://staticperl.schmorp.de/staticperl>.

F<staticperl> interprets the first argument as a command to execute,
optionally followed by any parameters.

There are two command categories: the "phase 1" commands which deal with
installing perl and perl modules, and the "phase 2" commands, which deal
with creating binaries and bundle files.

=head2 PHASE 1 COMMANDS: INSTALLING PERL

The most important command is F<install>, which does basically
everything. The default is to download and install perl 5.12.2 and a few
modules required by F<staticperl> itself, but all this can (and should) be
changed - see L<CONFIGURATION>, below.

The command

   staticperl install

Is normally all you need: It installs the perl interpreter in
F<~/.staticperl/perl>. It downloads, configures, builds and installs the
perl interpreter if required.

Most of the following commands simply run one or more steps of this
sequence.

To force recompilation or reinstallation, you need to run F<staticperl
distclean> first.

=over 4

=item F<staticperl version>

Prints some info about the version of the F<staticperl> script you are using.

=item F<staticperl fetch>

Runs only the download and unpack phase, unless this has already happened.

=item F<staticperl configure>

Configures the unpacked perl sources, potentially after downloading them first.

=item F<staticperl build>

Builds the configured perl sources, potentially after automatically
configuring them.

=item F<staticperl install>

Wipes the perl installation directory (usually F<~/.staticperl/perl>) and
installs the perl distribution, potentially after building it first.

=item F<staticperl cpan> [args...]

Starts an interactive CPAN shell that you can use to install further
modules. Installs the perl first if necessary, but apart from that,
no magic is involved: you could just as well run it manually via
F<~/.staticperl/perl/bin/cpan>.

Any additional arguments are simply passed to the F<cpan> command.

=item F<staticperl instcpan> module...

Tries to install all the modules given and their dependencies, using CPAN.

Example:

   staticperl instcpan EV AnyEvent::HTTPD Coro

=item F<staticperl instsrc> directory...

In the unlikely case that you have unpacked perl modules around and want
to install from these instead of from CPAN, you can do this using this
command by specifying all the directories with modules in them that you
want to have built.

=item F<staticperl clean>

Deletes the perl source directory (and potentially cleans up other
intermediate files). This can be used to clean up files only needed for
building perl, without removing the installed perl interpreter, or to
force a re-build from scratch.

At the moment, it doesn't delete downloaded tarballs.

=item F<staticperl distclean>

This wipes your complete F<~/.staticperl> directory. Be careful with this,
it nukes your perl download, perl sources, perl distribution and any
installed modules. It is useful if you wish to start over "from scratch"
or when you want to uninstall F<staticperl>.

=back

=head2 PHASE 2 COMMANDS: BUILDING PERL BUNDLES

Building (linking) a new F<perl> binary is handled by a separate
script. To make it easy to use F<staticperl> from a F<chroot>, the script
is embedded into F<staticperl>, which will write it out and call for you
with any arguments you pass:

   staticperl mkbundle mkbundle-args...

In the oh so unlikely case of something not working here, you
can run the script manually as well (by default it is written to
F<~/.staticperl/mkbundle>).

F<mkbundle> is a more conventional command and expect the argument
syntax commonly used on UNIX clones. For example, this command builds
a new F<perl> binary and includes F<Config.pm> (for F<perl -V>),
F<AnyEvent::HTTPD>, F<URI> and a custom F<httpd> script (from F<eg/httpd>
in this distribution):

   # first make sure we have perl and the required modules
   staticperl instcpan AnyEvent::HTTPD

   # now build the perl
   staticperl mkperl -M'"Config_heavy.pl"' -MAnyEvent::Impl::Perl \
                     -MAnyEvent::HTTPD -MURI::http \
                     --add 'eg/httpd httpd.pm'

   # finally, invoke it
   ./perl -Mhttpd

As you can see, things are not quite as trivial: the L<Config> module has
a hidden dependency which is not even a perl module (F<Config_heavy.pl>),
L<AnyEvent> needs at least one event loop backend that we have to
specify manually (here L<AnyEvent::Impl::Perl>), and the F<URI> module
(required by L<AnyEvent::HTTPD>) implements various URI schemes as extra
modules - since L<AnyEvent::HTTPD> only needs C<http> URIs, we only need
to include that module. I found out about these dependencies by carefully
watching any error messages about missing modules...

Instead of building a new perl binary, you can also build a standalone
application:

   # build the app
   staticperl mkapp app --boot eg/httpd \
                    -MAnyEvent::Impl::Perl -MAnyEvent::HTTPD -MURI::http

   # run it
   ./app

=head3 OPTION PROCESSING

All options can be given as arguments on the command line (typically
using long (e.g. C<--verbose>) or short option (e.g. C<-v>) style). Since
specifying a lot of modules can make the command line very cumbersome,
you can put all long options into a "bundle specification file" (with or
without C<--> prefix) and specify this bundle file instead.

For example, the command given earlier could also look like this:

   staticperl mkperl httpd.bundle

And all options could be in F<httpd.bundle>:
   
   use "Config_heavy.pl"
   use AnyEvent::Impl::Perl
   use AnyEvent::HTTPD
   use URI::http
   add eg/httpd httpd.pm

All options that specify modules or files to be added are processed in the
order given on the command line (that affects the C<--use> and C<--eval>
options at the moment).

=head3 PACKAGE SELECTION WORKFLOW

F<staticperl mkbundle> has a number of options to control package
selection. This section describes how they interact with each other. Also,
since I am still a newbie w.r.t. these issues, maybe future versions of
F<staticperl> will change this, so watch out :)

The idiom "in order" means "in order that they are specified on the
commandline". If you use a bundle specification file, then the options
will be processed as if they were given in place of the bundle file name.

=over 4

=item 1. apply all C<--use>, C<--eval>, C<--add>, C<--addbin> and
C<--incglob> options, in order.

In addition, C<--use> and C<--eval> dependencies will be added when the
options are processed.

=item 2. apply all C<--include> and C<--exclude> options, in order.

All this step does is potentially reduce the number of files already
selected or found in phase 1.

=item 3. find all modules (== F<.pm> files), gather their static archives
(F<.a>) and AutoLoader splitfiles (F<.ix> and F<.al> files), find any
extra libraries they need for linking (F<extralibs.ld>) and optionally
evaluate any F<.packlist> files.

This step is required to link against XS extensions and also adds files
required for L<AutoLoader> to do it's job.

=back

After this, all the files selected for bundling will be read and processed
(stripped), the bundle files will be written, and optionally a new F<perl>
or application binary will be linked.

=head3 MKBUNDLE OPTIONS

=over 4

=item --verbose | -v

Increases the verbosity level by one (the default is C<1>).

=item --quiet | -q

Decreases the verbosity level by one.

=item --strip none|pod|ppi

Specify the stripping method applied to reduce the file of the perl
sources included.

The default is C<pod>, which uses the L<Pod::Strip> module to remove all
pod documentation, which is very fast and reduces file size a lot.

The C<ppi> method uses L<PPI> to parse and condense the perl sources. This
saves a lot more than just L<Pod::Strip>, and is generally safer,
but is also a lot slower (some files take almost a minute to strip -
F<staticperl> maintains a cache of stripped files to speed up subsequent
runs for this reason). Note that this method doesn't optimise for raw file
size, but for best compression (that means that the uncompressed file size
is a bit larger, but the files compress better, e.g. with F<upx>).

Last not least, if you need accurate line numbers in error messages,
or in the unlikely case where C<pod> is too slow, or some module gets
mistreated, you can specify C<none> to not mangle included perl sources in
any way.

=item --perl

After writing out the bundle files, try to link a new perl interpreter. It
will be called F<perl> and will be left in the current working
directory. The bundle files will be removed.

This switch is automatically used when F<staticperl> is invoked with the
C<mkperl> command (instead of C<mkbundle>):

   # build a new ./perl with only common::sense in it - very small :)
   staticperl mkperl -Mcommon::sense

=item --app name

After writing out the bundle files, try to link a new standalone
program. It will be called C<name>, and the bundle files get removed after
linking it.

The difference to the (mutually exclusive) C<--perl> option is that the
binary created by this option will not try to act as a perl interpreter -
instead it will simply initialise the perl interpreter, clean it up and
exit.

This switch is automatically used when F<staticperl> is invoked with the
C<mkapp> command (instead of C<mkbundle>):

To let it do something useful you I<must> add some boot code, e.g. with
the C<--boot> option.

Example: create a standalone perl binary that will execute F<appfile> when
it is started.

   staticperl mkbundle --app myexe --boot appfile

=item --use module | -Mmodule

Include the named module and all direct dependencies. This is done by
C<require>'ing the module in a subprocess and tracing which other modules
and files it actually loads. If the module uses L<AutoLoader>, then all
splitfiles will be included as well.

Example: include AnyEvent and AnyEvent::Impl::Perl.

   staticperl mkbundle --use AnyEvent --use AnyEvent::Impl::Perl

Sometimes you want to load old-style "perl libraries" (F<.pl> files), or
maybe other weirdly named files. To do that, you need to quote the name in
single or double quotes. When given on the command line, you probably need
to quote once more to avoid your shell interpreting it. Common cases that
need this are F<Config_heavy.pl> and F<utf8_heavy.pl>.

Example: include the required files for F<perl -V> to work in all its
glory (F<Config.pm> is included automatically by this).

   # bourne shell
   staticperl mkbundle --use '"Config_heavy.pl"'

   # bundle specification file
   use "Config_heavy.pl"

The C<-Mmodule> syntax is included as an alias that might be easier to
remember than C<use>. Or maybe it confuses people. Time will tell. Or
maybe not. Argh.

=item --eval "perl code" | -e "perl code"

Sometimes it is easier (or necessary) to specify dependencies using perl
code, or maybe one of the modules you use need a special use statement. In
that case, you can use C<eval> to execute some perl snippet or set some
variables or whatever you need. All files C<require>'d or C<use>'d in the
script are included in the final bundle.

Keep in mind that F<mkbundle> will only C<require> the modules named
by the C<--use> option, so do not expect the symbols from modules you
C<--use>'d earlier on the command line to be available.

Example: force L<AnyEvent> to detect a backend and therefore include it
in the final bundle.

   staticperl mkbundle --eval 'use AnyEvent; AnyEvent::detect'

   # or like this
   staticperl mkbundle -MAnyEvent --eval 'use AnyEvent; AnyEvent::detect'

Example: use a separate "bootstrap" script that C<use>'s lots of modules
and include this in the final bundle, to be executed automatically.

   staticperl mkbundle --eval 'do "bootstrap"' --boot bootstrap

=item --boot filename

Include the given file in the bundle and arrange for it to be executed
(using a C<require>) before anything else when the new perl is
initialised. This can be used to modify C<@INC> or anything else before
the perl interpreter executes scripts given on the command line (or via
C<-e>). This works even in an embedded interpreter.

=item --usepacklist

Read F<.packlist> files for each distribution that happens to match a
module name you specified. Sounds weird, and it is, so expect semantics to
change somehow in the future.

The idea is that most CPAN distributions have a F<.pm> file that matches
the name of the distribution (which is rather reasonable after all).

If this switch is enabled, then if any of the F<.pm> files that have been
selected match an install distribution, then all F<.pm>, F<.pl>, F<.al>
and F<.ix> files installed by this distribution are also included.

For example, using this switch, when the L<URI> module is specified, then
all L<URI> submodules that have been installed via the CPAN distribution
are included as well, so you don't have to manually specify them.

=item --incglob pattern

This goes through all library directories and tries to match any F<.pm>
and F<.pl> files against the extended glob pattern (see below). If a file
matches, it is added. This switch will automatically detect L<AutoLoader>
files and the required link libraries for XS modules, but it will I<not>
scan the file for dependencies (at the moment).

This is mainly useful to include "everything":

   --incglob '*'

Or to include perl libraries, or trees of those, such as the unicode
database files needed by many other modules:

   --incglob '/unicore/**.pl'

=item --add file | --add "file alias"

Adds the given (perl) file into the bundle (and optionally call it
"alias"). This is useful to include any custom files into the bundle.

Example: embed the file F<httpd> as F<httpd.pm> when creating the bundle.

   staticperl mkperl --add "httpd httpd.pm"

It is also a great way to add any custom modules:

   # specification file
   add file1 myfiles/file1
   add file2 myfiles/file2
   add file3 myfiles/file3

=item --binadd file | --add "file alias"

Just like C<--add>, except that it treats the file as binary and adds it
without any processing.

You should probably add a C</> prefix to avoid clashing with embedded
perl files (whose paths do not start with C</>), and/or use a special
directory, such as C</res/name>.

You can later get a copy of these files by calling C<staticperl::find
"alias">.

=item --include pattern | -i pattern | --exclude pattern | -x pattern

These two options define an include/exclude filter that is used after all
files selected by the other options have been found. Each include/exclude
is applied to all files found so far - an include makes sure that the
given files will be part of the resulting file set, an exclude will
exclude files. The patterns are "extended glob patterns" (see below).

For example, to include everything, except C<Devel> modules, but still
include F<Devel::PPPort>, you could use this:

   --incglob '*' -i '/Devel/PPPort.pm' -x '/Devel/**'

=item --static

When C<--perl> is also given, link statically instead of dynamically. The
default is to link the new perl interpreter fully dynamic (that means all
perl modules are linked statically, but all external libraries are still
referenced dynamically).

Keep in mind that Solaris doesn't support static linking at all, and
systems based on GNU libc don't really support it in a usable fashion
either. Try uClibc if you want to create fully statically linked
executables, or try the C<--staticlibs> option to link only some libraries
statically.

=item --staticlib libname

When not linking fully statically, this option allows you to link specific
libraries statically. What it does is simply replace all occurances of
C<-llibname> with the GCC-specific C<-Wl,-Bstatic -llibname -Wl,-Bdynamic>
option.

This will have no effect unless the library is actually linked against,
specifically, C<--staticlib> will not link against the named library
unless it would be linked against anyway.

Example: link libcrypt statically into the binary.

   staticperl mkperl -MIO::AIO --staticlib crypt

   # ldopts might nwo contain:
   # -lm -Wl,-Bstatic -lcrypt -Wl,-Bdynamic -lpthread

=item any other argument

Any other argument is interpreted as a bundle specification file, which
supports most long options (without extra quoting), one option per line.

=back

=head3 EXTENDED GLOB PATTERNS

Some options of F<staticperl mkbundle> expect an I<extended glob
pattern>. This is neither a normal shell glob nor a regex, but something
in between. The idea has been copied from rsync, and there are the current
matching rules:

=over 4

=item Patterns starting with F</> will be a anchored at the root of the library tree.

That is, F</unicore> will match the F<unicore> directory in C<@INC>, but
nothing inside, and neither any other file or directory called F<unicore>
anywhere else in the hierarchy.

=item Patterns not starting with F</> will be anchored at the end of the path.

That is, F<idna.pl> will match any file called F<idna.pl> anywhere in the
hierarchy, but not any directories of the same name.

=item A F<*> matches any single component.

That is, F</unicore/*.pl> would match all F<.pl> files directly inside
C</unicore>, not any deeper level F<.pl> files. Or in other words, F<*>
will not match slashes.

=item A F<**> matches anything.

That is, F</unicore/**.pl> would match all F<.pl> files under F</unicore>,
no matter how deeply nested they are inside subdirectories.

=item A F<?> matches a single character within a component.

That is, F</Encode/??.pm> matches F</Encode/JP.pm>, but not the
hypothetical F</Encode/J/.pm>, as F<?> does not match F</>.

=back

=head2 F<STATICPERL> CONFIGURATION AND HOOKS

During (each) startup, F<staticperl> tries to source some shell files to
allow you to fine-tune/override configuration settings.

In them you can override shell variables, or define shell functions
("hooks") to be called at specific phases during installation. For
example, you could define a C<postinstall> hook to install additional
modules from CPAN each time you start from scratch.

If the env variable C<$STATICPERLRC> is set, then F<staticperl> will try
to source the file named with it only. Otherwise, it tries the following
shell files in order:

   /etc/staticperlrc
   ~/.staticperlrc
   $STATICPERL/rc

Note that the last file is erased during F<staticperl distclean>, so
generally should not be used.

=head3 CONFIGURATION VARIABLES

=head4 Variables you I<should> override

=over 4

=item C<EMAIL>

The e-mail address of the person who built this binary. Has no good
default, so should be specified by you.

=item C<CPAN>

The URL of the CPAN mirror to use (e.g. L<http://mirror.netcologne.de/cpan/>).

=item C<EXTRA_MODULES>

Additional modules installed during F<staticperl install>. Here you can
set which modules you want have to installed from CPAN.

Example: I really really need EV, AnyEvent, Coro and AnyEvent::AIO.

   EXTRA_MODULES="EV AnyEvent Coro AnyEvent::AIO"

Note that you can also use a C<postinstall> hook to achieve this, and
more.

=back

=head4 Variables you might I<want> to override

=over 4

=item C<STATICPERL>

The directory where staticperl stores all its files
(default: F<~/.staticperl>).

=item C<PERL_MM_USE_DEFAULT>, C<EV_EXTRA_DEFS>, ...

Usually set to C<1> to make modules "less inquisitive" during their
installation, you can set any environment variable you want - some modules
(such as L<Coro> or L<EV>) use environment variables for further tweaking.

=item C<PERL_VERSION>

The perl version to install - default is currently C<5.12.2>, but C<5.8.9>
is also a good choice (5.8.9 is much smaller than 5.12.2, while 5.10.1 is
about as big as 5.12.2).

=item C<PERL_PREFIX>

The prefix where perl gets installed (default: F<$STATICPERL/perl>),
i.e. where the F<bin> and F<lib> subdirectories will end up.

=item C<PERL_CONFIGURE>

Additional Configure options - these are simply passed to the perl
Configure script. For example, if you wanted to enable dynamic loading,
you could pass C<-Dusedl>. To enable ithreads (Why would you want that
insanity? Don't! Use L<forks> instead!) you would pass C<-Duseithreads>
and so on.

More commonly, you would either activate 64 bit integer support
(C<-Duse64bitint>), or disable large files support (-Uuselargefiles), to
reduce filesize further.

=item C<PERL_CC>, C<PERL_CPPFLAGS>, C<PERL_OPTIMIZE>, C<PERL_LDFLAGS>, C<PERL_LIBS>

These flags are passed to perl's F<Configure> script, and are generally
optimised for small size (at the cost of performance). Since they also
contain subtle workarounds around various build issues, changing these
usually requires understanding their default values - best look at the top
of the F<staticperl> script for more info on these.

=back

=head4 Variables you probably I<do not want> to override

=over 4

=item C<MAKE>

The make command to use - default is C<make>.

=item C<MKBUNDLE>

Where F<staticperl> writes the C<mkbundle> command to
(default: F<$STATICPERL/mkbundle>).

=item C<STATICPERL_MODULES>

Additional modules needed by C<mkbundle> - should therefore not be changed
unless you know what you are doing.

=back

=head3 OVERRIDABLE HOOKS

In addition to environment variables, it is possible to provide some
shell functions that are called at specific times. To provide your own
commands, just define the corresponding function.

Example: install extra modules from CPAN and from some directories
at F<staticperl install> time.

   postinstall() {
      rm -rf lib/threads* # weg mit Schaden
      instcpan IO::AIO EV
      instsrc ~/src/AnyEvent
      instsrc ~/src/XML-Sablotron-1.0100001
      instcpan Anyevent::AIO AnyEvent::HTTPD
   }

=over 4

=item preconfigure

Called just before running F<./Configur> in the perl source
directory. Current working directory is the perl source directory.

This can be used to set any C<PERL_xxx> variables, which might be costly
to compute.

=item postconfigure

Called after configuring, but before building perl. Current working
directory is the perl source directory.

Could be used to tailor/patch config.sh (followed by F<sh Configure -S>)
or do any other modifications.

=item postbuild

Called after building, but before installing perl. Current working
directory is the perl source directory.

I have no clue what this could be used for - tell me.

=item postinstall

Called after perl and any extra modules have been installed in C<$PREFIX>,
but before setting the "installation O.K." flag.

The current working directory is C<$PREFIX>, but maybe you should not rely
on that.

This hook is most useful to customise the installation, by deleting files,
or installing extra modules using the C<instcpan> or C<instsrc> functions.

The script must return with a zero exit status, or the installation will
fail.

=back

=head1 ANATOMY OF A BUNDLE

When not building a new perl binary, C<mkbundle> will leave a number of
files in the current working directory, which can be used to embed a perl
interpreter in your program.

Intimate knowledge of L<perlembed> and preferably some experience with
embedding perl is highly recommended.

C<mkperl> (or the C<--perl> option) basically does this to link the new
interpreter (it also adds a main program to F<bundle.>):

   $Config{cc} $(cat bundle.ccopts) -o perl bundle.c $(cat bundle.ldopts)

=over 4

=item bundle.h

A header file that contains the prototypes of the few symbols "exported"
by bundle.c, and also exposes the perl headers to the application.

=over 4

=item staticperl_init ()

Initialises the perl interpreter. You can use the normal perl functions
after calling this function, for example, to define extra functions or
to load a .pm file that contains some initialisation code, or the main
program function:

   XS (xsfunction)
   {
     dXSARGS;

     // now we have items, ST(i) etc.
   }

   static void
   run_myapp(void)
   {
      staticperl_init ();
      newXSproto ("myapp::xsfunction", xsfunction, __FILE__, "$$;$");
      eval_pv ("require myapp::main", 1); // executes "myapp/main.pm"
   }

=item staticperl_xs_init (pTHX)

Sometimes you need direct control over C<perl_parse> and C<perl_run>, in
which case you do not want to use C<staticperl_init> but call them on your
own.

Then you need this function - either pass it directly as the C<xs_init>
function to C<perl_parse>, or call it from your own C<xs_init> function.

=item staticperl_cleanup ()

In the unlikely case that you want to destroy the perl interpreter, here
is the corresponding function.

=item PerlInterpreter *staticperl

The perl interpreter pointer used by staticperl. Not normally so useful,
but there it is.

=back

=item bundle.ccopts

Contains the compiler options required to compile at least F<bundle.c> and
any file that includes F<bundle.h> - you should probably use it in your
C<CFLAGS>.

=item bundle.ldopts

The linker options needed to link the final program.

=back

=head1 RUNTIME FUNCTIONALITY

Binaries created with C<mkbundle>/C<mkperl> contain extra functions, which
are required to access the bundled perl sources, but might be useful for
other purposes.

In addition, for the embedded loading of perl files to work, F<staticperl>
overrides the C<@INC> array.

=over 4

=item $file = staticperl::find $path

Returns the data associated with the given C<$path>
(e.g. C<Digest/MD5.pm>, C<auto/POSIX/autosplit.ix>), which is basically
the UNIX path relative to the perl library directory.

Returns C<undef> if the file isn't embedded.

=item @paths = staticperl::list

Returns the list of all paths embedded in this binary.

=back

=head1 FULLY STATIC BINARIES - BUILDROOT

To make truly static (Linux-) libraries, you might want to have a look at
buildroot (L<http://buildroot.uclibc.org/>).

Buildroot is primarily meant to set up a cross-compile environment (which
is not so useful as perl doesn't quite like cross compiles), but it can also compile
a chroot environment where you can use F<staticperl>.

To do so, download buildroot, and enable "Build options => development
files in target filesystem" and optionally "Build options => gcc
optimization level (optimize for size)". At the time of writing, I had
good experiences with GCC 4.4.x but not GCC 4.5.

To minimise code size, I used C<-pipe -ffunction-sections -fdata-sections
-finline-limit=8 -fno-builtin-strlen -mtune=i386>. The C<-mtune=i386>
doesn't decrease codesize much, but it makes the file much more
compressible.

If you don't need Coro or threads, you can go with "linuxthreads.old" (or
no thread support). For Coro, it is highly recommended to switch to a
uClibc newer than 0.9.31 (at the time of this writing, I used the 20101201
snapshot) and enable NPTL, otherwise Coro needs to be configured with the
ultra-slow pthreads backend to work around linuxthreads bugs (it also uses
twice the address space needed for stacks).

If you use C<linuxthreads.old>, then you should also be aware that
uClibc shares C<errno> between all threads when statically linking. See
L<http://lists.uclibc.org/pipermail/uclibc/2010-June/044157.html> for a
workaround (And L<https://bugs.uclibc.org/2089> for discussion).

C<ccache> support is also recommended, especially if you want
to play around with buildroot options. Enabling the C<miniperl>
package will probably enable all options required for a successful
perl build. F<staticperl> itself additionally needs either C<wget>
(recommended, for CPAN) or C<curl>.

As for shells, busybox should provide all that is needed, but the default
busybox configuration doesn't include F<comm> which is needed by perl -
either make a custom busybox config, or compile coreutils.

For the latter route, you might find that bash has some bugs that keep
it from working properly in a chroot - either use dash (and link it to
F</bin/sh> inside the chroot) or link busybox to F</bin/sh>, using it's
built-in ash shell.

Finally, you need F</dev/null> inside the chroot for many scripts to work
- F<cp /dev/null output/target/dev> or bind-mounting your F</dev> will
both provide this.

After you have compiled and set up your buildroot target, you can copy
F<staticperl> from the C<App::Staticperl> distribution or from your
perl f<bin> directory (if you installed it) into the F<output/target>
filesystem, chroot inside and run it.

=head1 RECIPES / SPECIFIC MODULES

This section contains some common(?) recipes and information about
problems with some common modules or perl constructs that require extra
files to be included.

=head2 MODULES

=over 4

=item utf8

Some functionality in the utf8 module, such as swash handling (used
for unicode character ranges in regexes) is implemented in the
C<"utf8_heavy.pl"> library:

   -M'"utf8_heavy.pl"'

Many Unicode properties in turn are defined in separate modules,
such as C<"unicore/Heavy.pl"> and more specific data tables such as
C<"unicore/To/Digit.pl"> or C<"unicore/lib/Perl/Word.pl">. These tables
are big (7MB uncompressed, although F<staticperl> contains special
handling for those files), so including them on demand by your application
only might pay off.

To simply include the whole unicode database, use:

   --incglob '/unicore/*.pl'

=item AnyEvent

AnyEvent needs a backend implementation that it will load in a delayed
fashion. The L<AnyEvent::Impl::Perl> backend is the default choice
for AnyEvent if it can't find anything else, and is usually a safe
fallback. If you plan to use e.g. L<EV> (L<POE>...), then you need to
include the L<AnyEvent::Impl::EV> (L<AnyEvent::Impl::POE>...) backend as
well.

If you want to handle IRIs or IDNs (L<AnyEvent::Util> punycode and idn
functions), you also need to include C<"AnyEvent/Util/idna.pl"> and
C<"AnyEvent/Util/uts46data.pl">.

Or you can use C<--usepacklist> and specify C<-MAnyEvent> to include
everything.

=item Carp

Carp had (in older versions of perl) a dependency on L<Carp::Heavy>. As of
perl 5.12.2 (maybe earlier), this dependency no longer exists.

=item Config

The F<perl -V> switch (as well as many modules) needs L<Config>, which in
turn might need L<"Config_heavy.pl">. Including the latter gives you
both.

=item Term::ReadLine::Perl

Also needs L<Term::ReadLine::readline>, or C<--usepacklist>.

=item URI

URI implements schemes as separate modules - the generic URL scheme is
implemented in L<URI::_generic>, HTTP is implemented in L<URI::http>. If
you need to use any of these schemes, you should include these manually,
or use C<--usepacklist>.

=back

=head2 RECIPES

=over 4

=item Linking everything in

To link just about everything installed in the perl library into a new
perl, try this:

   staticperl mkperl --strip ppi --incglob '*'

=item Getting rid of netdb function

The perl core has lots of netdb functions (C<getnetbyname>, C<getgrent>
and so on) that few applications use. You can avoid compiling them in by
putting the following fragment into a C<preconfigure> hook:

   preconfigure() {
      for sym in \
         d_getgrnam_r d_endgrent d_endgrent_r d_endhent \
         d_endhostent_r d_endnent d_endnetent_r d_endpent \
         d_endprotoent_r d_endpwent d_endpwent_r d_endsent \
         d_endservent_r d_getgrent d_getgrent_r d_getgrgid_r \
         d_getgrnam_r d_gethbyaddr d_gethent d_getsbyport \
         d_gethostbyaddr_r d_gethostbyname_r d_gethostent_r \
         d_getlogin_r d_getnbyaddr d_getnbyname d_getnent \
         d_getnetbyaddr_r d_getnetbyname_r d_getnetent_r \
         d_getpent d_getpbyname d_getpbynumber d_getprotobyname_r \
         d_getprotobynumber_r d_getprotoent_r d_getpwent \
         d_getpwent_r d_getpwnam_r d_getpwuid_r d_getsent \
         d_getservbyname_r d_getservbyport_r d_getservent_r \
         d_getspnam_r d_getsbyname
         # d_gethbyname
      do
         PERL_CONFIGURE="$PERL_CONFIGURE -U$sym"
      done
   }

This mostly gains space when linking staticaly, as the functions will
likely not be linked in. The gain for dynamically-linked binaries is
smaller.

Also, this leaves C<gethostbyname> in - not only is it actually used
often, the L<Socket> module also exposes it, so leaving it out usually
gains little. Why Socket exposes a C function that is in the core already
is anybody's guess.

=back

=head1 AUTHOR

 Marc Lehmann <schmorp@schmorp.de>
 http://software.schmorp.de/pkg/staticperl.html
Revision:	1.23
Committed:	Mon Dec 13 18:08:01 2010 UTC (13 years, 5 months ago) by root
Branch:	MAIN
Changes since 1.22:	+4 -0 lines
Log Message:	* empty log message *