--- App-Staticperl/staticperl.pod 2010/12/06 20:53:44 1.2 +++ App-Staticperl/staticperl.pod 2010/12/10 20:29:17 1.20 @@ -1,6 +1,6 @@ =head1 NAME -staticperl - perl, libc, 50 modules all in one 500kb file +staticperl - perl, libc, 100 modules, all in one 500kb file =head1 SYNOPSIS @@ -16,6 +16,7 @@ staticperl instcpan modulename... # install modules from CPAN staticperl mkbundle # see documentation staticperl mkperl # see documentation + staticperl mkapp appname # see documentation Typical Examples: @@ -24,21 +25,28 @@ staticperl mkperl -M '"Config_heavy.pl"' # build a perl that supports -V staticperl mkperl -MAnyEvent::Impl::Perl -MAnyEvent::HTTPD -MURI -MURI::http # build a perl with the above modules linked in + staticperl mkapp myapp --boot mainprog mymodules + # build a binary "myapp" from mainprog and mymodules =head1 DESCRIPTION -This script helps you creating single-file perl interpreters, or embedding -a pelr interpreter in your apps. Single-file means that it is fully -self-contained - no separate shared objects, no autoload fragments, no .pm -or .pl files are needed. And when linking statically, you can create (or -embed) a single file that contains perl interpreter, libc, all the modules -you need and all the libraries you need. - -With uclibc and upx on x86, you can create a single 500kb binary that -contains perl and 50 modules such as AnyEvent, EV, IO::AIO, Coro and so -on. Or any other choice of modules. +This script helps you to create single-file perl interpreters +or applications, or embedding a perl interpreter in your +applications. Single-file means that it is fully self-contained - no +separate shared objects, no autoload fragments, no .pm or .pl files are +needed. And when linking statically, you can create (or embed) a single +file that contains perl interpreter, libc, all the modules you need, all +the libraries you need and of course your actual program. + +With F and F on x86, you can create a single 500kb binary +that contains perl and 100 modules such as POSIX, AnyEvent, EV, IO::AIO, +Coro and so on. Or any other choice of modules. + +To see how this turns out, you can try out smallperl and bigperl, two +pre-built static and compressed perl binaries with many and even more +modules: just follow the links at L. -The created files do not need write access to the filesystem (like PAR +The created files do not need write access to the file system (like PAR does). In fact, since this script is in many ways similar to PAR::Packer, here are the differences: @@ -65,16 +73,21 @@ F loads all required files directly from memory. There is no need to unpack files into a temporary directory. -=item * More control over included files. +=item * More control over included files, more burden. -PAR tries to be maintainance and hassle-free - it tries to include more files -than necessary to make sure everything works out of the box. The extra files -(such as the unicode database) can take substantial amounts of memory and filesize. +PAR tries to be maintenance and hassle-free - it tries to include more +files than necessary to make sure everything works out of the box. It +mostly succeeds at this, but he extra files (such as the unicode database) +can take substantial amounts of memory and file size. With F, the burden is mostly with the developer - only direct compile-time dependencies and L are handled automatically. This means the modules to include often need to be tweaked manually. +All this does not preclude more permissive modes to be implemented in +the future, but right now, you have to resolve state hidden dependencies +manually. + =item * PAR works out of the box, F does not. Maintaining your own custom perl build can be a pain in the ass, and while @@ -82,6 +95,11 @@ build and possibly fiddling with some modules. PAR is likely to produce results faster. +Ok, PAR never has worked for me out of the box, and for some people, +F does work out of the box, as they don't count "fiddling with +module use lists" against it, but nevertheless, F is certainly +a bit more difficult to use. + =back =head1 HOW DOES IT WORK? @@ -90,18 +108,18 @@ your choice in F<~/.staticperl>. You can add extra modules either by letting F install them for you automatically, or by using CPAN and doing it interactively. This usually takes 5-10 minutes, depending on -the speed of your computer and your internet conenction. +the speed of your computer and your internet connection. It is possible to do program development at this stage, too. Afterwards, you create a list of files and modules you want to include, -and then either build a new perl binary (that acts just like a normla perl +and then either build a new perl binary (that acts just like a normal perl except everything is compiled in), or you create bundle files (basically C sources you can use to embed all files into your project). -This step is very fast (a few seconds if PPI is not used for stripping, -more seconds otherwise, as PPI is very slow), and can be tweaked and -repeated as often as necessary. +This step is very fast (a few seconds if PPI is not used for stripping, or +the stripped files are in the cache), and can be tweaked and repeated as +often as necessary. =head1 THE F SCRIPT @@ -136,11 +154,15 @@ Most of the following commands simply run one or more steps of this sequence. -To force recompilation or reinstalaltion, you need to run F first. =over 4 +=item F + +Prints some info about the version of the F script you are using. + =item F Runs only the download and unpack phase, unless this has already happened. @@ -156,13 +178,13 @@ =item F -Wipes the perl installation directory (usually F<~/.staticperl/perl>) and installs -the perl distribution, potentially aftering building it first. +Wipes the perl installation directory (usually F<~/.staticperl/perl>) and +installs the perl distribution, potentially after building it first. =item F [args...] -Starts an interactive CPAN shell that you cna use to install further -modules. Installs the perl first if neccessary, but apart from that, +Starts an interactive CPAN shell that you can use to install further +modules. Installs the perl first if necessary, but apart from that, no magic is involved: you could just as well run it manually via F<~/.staticperl/perl/bin/cpan>. @@ -179,15 +201,18 @@ =item F directory... In the unlikely case that you have unpacked perl modules around and want -to install from these instead of from CPAN, you cna do this using this +to install from these instead of from CPAN, you can do this using this command by specifying all the directories with modules in them that you want to have built. =item F -Runs F in the perl source directory (and potentially -cleans up other intermediate files). This can be used to clean up -intermediate files without removing the installed perl interpreter. +Deletes the perl source directory (and potentially cleans up other +intermediate files). This can be used to clean up files only needed for +building perl, without removing the installed perl interpreter, or to +force a re-build from scratch. + +At the moment, it doesn't delete downloaded tarballs. =item F @@ -212,7 +237,7 @@ F<~/.staticperl/mkbundle>). F is a more conventional command and expect the argument -syntax commonly used on unix clones. For example, this command builds +syntax commonly used on UNIX clones. For example, this command builds a new F binary and includes F (for F), F, F and a custom F script (from F in this distribution): @@ -231,16 +256,27 @@ As you can see, things are not quite as trivial: the L module has a hidden dependency which is not even a perl module (F), L needs at least one event loop backend that we have to -specifymanually (here L), and the F module +specify manually (here L), and the F module (required by L) implements various URI schemes as extra modules - since L only needs C URIs, we only need -to include that module. +to include that module. I found out about these dependencies by carefully +watching any error messages about missing modules... + +Instead of building a new perl binary, you can also build a standalone +application: + + # build the app + staticperl mkapp app --boot eg/httpd \ + -MAnyEvent::Impl::Perl -MAnyEvent::HTTPD -MURI::http + + # run it + ./app =head3 OPTION PROCESSING -All options can be given as arguments on the commandline (typically using -long (e.g. C<--verbose>) or short option (e.g. C<-v>) style). Since -specifying a lot of modules can make the commandlien very cumbersome, +All options can be given as arguments on the command line (typically +using long (e.g. C<--verbose>) or short option (e.g. C<-v>) style). Since +specifying a lot of modules can make the command line very cumbersome, you can put all long options into a "bundle specification file" (with or without C<--> prefix) and specify this bundle file instead. @@ -257,9 +293,47 @@ add eg/httpd httpd.pm All options that specify modules or files to be added are processed in the -order given on the commandline (that affects the C<--use> and C<--eval> +order given on the command line (that affects the C<--use> and C<--eval> options at the moment). +=head3 PACKAGE SELECTION WORKFLOW + +F has a number of options to control package +selection. This section describes how they interact with each other. Also, +since I am still a newbie w.r.t. these issues, maybe future versions of +F will change this, so watch out :) + +The idiom "in order" means "in order that they are specified on the +commandline". If you use a bundle specification file, then the options +will be processed as if they were given in place of the bundle file name. + +=over 4 + +=item 1. apply all C<--use>, C<--eval>, C<--add>, C<--addbin> and +C<--incglob> options, in order. + +In addition, C<--use> and C<--eval> dependencies will be added when the +options are processed. + +=item 2. apply all C<--include> and C<--exclude> options, in order. + +All this step does is potentially reduce the number of files already +selected or found in phase 1. + +=item 3. find all modules (== F<.pm> files), gather their static archives +(F<.a>) and AutoLoader splitfiles (F<.ix> and F<.al> files), find any +extra libraries they need for linking (F) and optionally +evaluate any F<.packlist> files. + +This step is required to link against XS extensions and also adds files +required for L to do it's job. + +=back + +After this, all the files selected for bundling will be read and processed +(stripped), the bundle files will be written, and optionally a new F +or application binary will be linked. + =head3 MKBUNDLE OPTIONS =over 4 @@ -278,15 +352,20 @@ sources included. The default is C, which uses the L module to remove all -pod documenatiton, which is very fast and reduces filesize a lot. +pod documentation, which is very fast and reduces file size a lot. The C method uses L to parse and condense the perl sources. This -saves a lot more than just L, and is generally safer, but is -also a lot slower, so is best used for production builds. - -Last not least, in the unlikely case where C is too slow, or some -module gets mistreated, you can specify C to not mangle included -perl sources in any way. +saves a lot more than just L, and is generally safer, +but is also a lot slower (some files take almost a minute to strip - +F maintains a cache of stripped files to speed up subsequent +runs for this reason). Note that this method doesn't optimise for raw file +size, but for best compression (that means that the uncompressed file size +is a bit larger, but the files compress better, e.g. with F). + +Last not least, if you need accurate line numbers in error messages, +or in the unlikely case where C is too slow, or some module gets +mistreated, you can specify C to not mangle included perl sources in +any way. =item --perl @@ -294,12 +373,34 @@ will be called F and will be left in the current working directory. The bundle files will be removed. -This switch is automatically ued when F is invoked with the +This switch is automatically used when F is invoked with the C command (instead of C): # build a new ./perl with only common::sense in it - very small :) staticperl mkperl -Mcommon::sense +=item --app name + +After writing out the bundle files, try to link a new standalone +program. It will be called C, and the bundle files get removed after +linking it. + +The difference to the (mutually exclusive) C<--perl> option is that the +binary created by this option will not try to act as a perl interpreter - +instead it will simply initialise the perl interpreter, clean it up and +exit. + +This switch is automatically used when F is invoked with the +C command (instead of C): + +To let it do something useful you I add some boot code, e.g. with +the C<--boot> option. + +Example: create a standalone perl binary that will execute F when +it is started. + + staticperl mkbundle --app myexe --boot appfile + =item --use module | -Mmodule Include the named module and all direct dependencies. This is done by @@ -313,7 +414,7 @@ Sometimes you want to load old-style "perl libraries" (F<.pl> files), or maybe other weirdly named files. To do that, you need to quote the name in -single or double quoutes. When given on the commandline, you probably need +single or double quotes. When given on the command line, you probably need to quote once more to avoid your shell interpreting it. Common cases that need this are F and F. @@ -340,7 +441,7 @@ Keep in mind that F will only C the modules named by the C<--use> option, so do not expect the symbols from modules you -C<--use>'d earlier on the commandlien to be available. +C<--use>'d earlier on the command line to be available. Example: force L to detect a backend and therefore include it in the final bundle. @@ -360,10 +461,44 @@ Include the given file in the bundle and arrange for it to be executed (using a C) before anything else when the new perl is initialised. This can be used to modify C<@INC> or anything else before -the perl interpreter executes scripts given on the commandline (or via +the perl interpreter executes scripts given on the command line (or via C<-e>). This works even in an embedded interpreter. -=item --add "file" | --add "file alias" +=item --usepacklist + +Read F<.packlist> files for each distribution that happens to match a +module name you specified. Sounds weird, and it is, so expect semantics to +change somehow in the future. + +The idea is that most CPAN distributions have a F<.pm> file that matches +the name of the distribution (which is rather reasonable after all). + +If this switch is enabled, then if any of the F<.pm> files that have been +selected match an install distribution, then all F<.pm>, F<.pl>, F<.al> +and F<.ix> files installed by this distribution are also included. + +For example, using this switch, when the L module is specified, then +all L submodules that have been installed via the CPAN distribution +are included as well, so you don't have to manually specify them. + +=item --incglob pattern + +This goes through all library directories and tries to match any F<.pm> +and F<.pl> files against the extended glob pattern (see below). If a file +matches, it is added. This switch will automatically detect L +files and the required link libraries for XS modules, but it will I +scan the file for dependencies (at the moment). + +This is mainly useful to include "everything": + + --incglob '*' + +Or to include perl libraries, or trees of those, such as the unicode +database files needed by many other modules: + + --incglob '/unicore/**.pl' + +=item --add file | --add "file alias" Adds the given (perl) file into the bundle (and optionally call it "alias"). This is useful to include any custom files into the bundle. @@ -379,6 +514,31 @@ add file2 myfiles/file2 add file3 myfiles/file3 +=item --binadd file | --add "file alias" + +Just like C<--add>, except that it treats the file as binary and adds it +without any processing. + +You should probably add a C prefix to avoid clashing with embedded +perl files (whose paths do not start with C), and/or use a special +directory, such as C. + +You can later get a copy of these files by calling C. + +=item --include pattern | -i pattern | --exclude pattern | -x pattern + +These two options define an include/exclude filter that is used after all +files selected by the other options have been found. Each include/exclude +is applied to all files found so far - an include makes sure that the +given files will be part of the resulting file set, an exclude will +exclude files. The patterns are "extended glob patterns" (see below). + +For example, to include everything, except C modules, but still +include F, you could use this: + + --incglob '*' -i '/Devel/PPPort.pm' -x '/Devel/**' + =item --static When C<--perl> is also given, link statically instead of dynamically. The @@ -392,6 +552,24 @@ executables, or try the C<--staticlibs> option to link only some libraries statically. +=item --staticlib libname + +When not linking fully statically, this option allows you to link specific +libraries statically. What it does is simply replace all occurances of +C<-llibname> with the GCC-specific C<-Wl,-Bstatic -llibname -Wl,-Bdynamic> +option. + +This will have no effect unless the library is actually linked against, +specifically, C<--staticlib> will not link against the named library +unless it would be linked against anyway. + +Example: link libcrypt statically into the binary. + + staticperl mkperl -MIO::AIO --staticlib crypt + + # ldopts might nwo contain: + # -lm -Wl,-Bstatic -lcrypt -Wl,-Bdynamic -lpthread + =item any other argument Any other argument is interpreted as a bundle specification file, which @@ -399,18 +577,62 @@ =back -=head2 F CONFIGURATION AND HOOKS +=head3 EXTENDED GLOB PATTERNS + +Some options of F expect an I. This is neither a normal shell glob nor a regex, but something +in between. The idea has been copied from rsync, and there are the current +matching rules: + +=over 4 + +=item Patterns starting with F will be a anchored at the root of the library tree. + +That is, F will match the F directory in C<@INC>, but +nothing inside, and neither any other file or directory called F +anywhere else in the hierarchy. + +=item Patterns not starting with F will be anchored at the end of the path. + +That is, F will match any file called F anywhere in the +hierarchy, but not any directories of the same name. + +=item A F<*> matches any single component. + +That is, F would match all F<.pl> files directly inside +C, not any deeper level F<.pl> files. Or in other words, F<*> +will not match slashes. -During (each) startup, F tries to source the following shell -files in order: +=item A F<**> matches anything. + +That is, F would match all F<.pl> files under F, +no matter how deeply nested they are inside subdirectories. + +=item A F matches a single character within a component. + +That is, F matches F, but not the +hypothetical F, as F does not match F. + +=back + +=head2 F CONFIGURATION AND HOOKS + +During (each) startup, F tries to source some shell files to +allow you to fine-tune/override configuration settings. + +In them you can override shell variables, or define shell functions +("hooks") to be called at specific phases during installation. For +example, you could define a C hook to install additional +modules from CPAN each time you start from scratch. + +If the env variable C<$STATICPERLRC> is set, then F will try +to source the file named with it only. Otherwise, it tries the following +shell files in order: /etc/staticperlrc ~/.staticperlrc $STATICPERL/rc -They can be used to override shell variables, or define functions to be -called at specific phases. - Note that the last file is erased during F, so generally should not be used. @@ -425,61 +647,73 @@ The e-mail address of the person who built this binary. Has no good default, so should be specified by you. -=back +=item C + +The URL of the CPAN mirror to use (e.g. L). -=head4 Variables you I to override +=item C -=over 4 +Additional modules installed during F. Here you can +set which modules you want have to installed from CPAN. -=item C +Example: I really really need EV, AnyEvent, Coro and AnyEvent::AIO. -The perl version to install - default is currently C<5.12.2>, but C<5.8.9> -is also a good choice (5.8.9 is much smaller than 5.12.2, while 5.10.1 is -about as big as 5.12.2). + EXTRA_MODULES="EV AnyEvent Coro AnyEvent::AIO" -=item C +Note that you can also use a C hook to achieve this, and +more. -The URL of the CPAN mirror to use (e.g. L). +=back -=item C, C, C, C +=head4 Variables you might I to override -These flags are passed to perl's F script, and are generally -optimised for small size (at the cost of performance). Since they also -contain subtle workarounds around various build issues, changing these -usually requires understanding their default values - best look at the top -of the F script for more info on these. +=over 4 =item C The directory where staticperl stores all its files (default: F<~/.staticperl>). -=item C - -The prefix where perl get's installed (default: F<$STATICPERL/perl>), -i.e. where the F and F subdirectories will end up. - -=item C, C, others +=item C, C, ... Usually set to C<1> to make modules "less inquisitive" during their installation, you can set any environment variable you want - some modules (such as L or L) use environment variables for further tweaking. -=item C +=item C -Additional modules installed during F. Here you can -set which modules you want have to installed from CPAN. +The perl version to install - default is currently C<5.12.2>, but C<5.8.9> +is also a good choice (5.8.9 is much smaller than 5.12.2, while 5.10.1 is +about as big as 5.12.2). -Example: I really really need EV, AnyEvent, Coro and IO::AIO. +=item C - EXTRA_MODULES="EV AnyEvent Coro IO::AIO" +The prefix where perl gets installed (default: F<$STATICPERL/perl>), +i.e. where the F and F subdirectories will end up. -Note that you cna also use a C hook to achieve this, and -more. +=item C + +Additional Configure options - these are simply passed to the perl +Configure script. For example, if you wanted to enable dynamic loading, +you could pass C<-Dusedl>. To enable ithreads (Why would you want that +insanity? Don't! Use L instead!) you would pass C<-Duseithreads> +and so on. + +More commonly, you would either activate 64 bit integer support +(C<-Duse64bitint>), or disable large files support (-Uuselargefiles), to +reduce filesize further. + +=item C, C, C, C + +These flags are passed to perl's F script, and are generally +optimised for small size (at the cost of performance). Since they also +contain subtle workarounds around various build issues, changing these +usually requires understanding their default values - best look at the top +of the F script for more info on these. =back -=head4 Variables you I to override +=head4 Variables you probably I to override =over 4 @@ -499,28 +733,36 @@ In addition to environment variables, it is possible to provide some shell functions that are called at specific times. To provide your own -commands, justd efine the corresponding function. +commands, just define the corresponding function. Example: install extra modules from CPAN and from some directories at F time. postinstall() { - rm -rf lib/threads.* # weg mit Schaden + rm -rf lib/threads* # weg mit Schaden instcpan IO::AIO EV instsrc ~/src/AnyEvent instsrc ~/src/XML-Sablotron-1.0100001 - instcpan AnyEvent::HTTPD + instcpan Anyevent::AIO AnyEvent::HTTPD } =over 4 +=item preconfigure + +Called just before running F<./Configur> in the perl source +directory. Current working directory is the perl source directory. + +This can be used to set any C variables, which might be costly +to compute. + =item postconfigure Called after configuring, but before building perl. Current working directory is the perl source directory. -Could be used to tailor/patch config.sh (followed by F<./Configure -S>) or -do any other modifications. +Could be used to tailor/patch config.sh (followed by F) +or do any other modifications. =item postbuild @@ -545,6 +787,282 @@ =back +=head1 ANATOMY OF A BUNDLE + +When not building a new perl binary, C will leave a number of +files in the current working directory, which can be used to embed a perl +interpreter in your program. + +Intimate knowledge of L and preferably some experience with +embedding perl is highly recommended. + +C (or the C<--perl> option) basically does this to link the new +interpreter (it also adds a main program to F): + + $Config{cc} $(cat bundle.ccopts) -o perl bundle.c $(cat bundle.ldopts) + +=over 4 + +=item bundle.h + +A header file that contains the prototypes of the few symbols "exported" +by bundle.c, and also exposes the perl headers to the application. + +=over 4 + +=item staticperl_init () + +Initialises the perl interpreter. You can use the normal perl functions +after calling this function, for example, to define extra functions or +to load a .pm file that contains some initialisation code, or the main +program function: + + XS (xsfunction) + { + dXSARGS; + + // now we have items, ST(i) etc. + } + + static void + run_myapp(void) + { + staticperl_init (); + newXSproto ("myapp::xsfunction", xsfunction, __FILE__, "$$;$"); + eval_pv ("require myapp::main", 1); // executes "myapp/main.pm" + } + +=item staticperl_xs_init (pTHX) + +Sometimes you need direct control over C and C, in +which case you do not want to use C but call them on your +own. + +Then you need this function - either pass it directly as the C +function to C, or call it from your own C function. + +=item staticperl_cleanup () + +In the unlikely case that you want to destroy the perl interpreter, here +is the corresponding function. + +=item PerlInterpreter *staticperl + +The perl interpreter pointer used by staticperl. Not normally so useful, +but there it is. + +=back + +=item bundle.ccopts + +Contains the compiler options required to compile at least F and +any file that includes F - you should probably use it in your +C. + +=item bundle.ldopts + +The linker options needed to link the final program. + +=back + +=head1 RUNTIME FUNCTIONALITY + +Binaries created with C/C contain extra functions, which +are required to access the bundled perl sources, but might be useful for +other purposes. + +In addition, for the embedded loading of perl files to work, F +overrides the C<@INC> array. + +=over 4 + +=item $file = staticperl::find $path + +Returns the data associated with the given C<$path> +(e.g. C, C), which is basically +the UNIX path relative to the perl library directory. + +Returns C if the file isn't embedded. + +=item @paths = staticperl::list + +Returns the list of all paths embedded in this binary. + +=back + +=head1 FULLY STATIC BINARIES - BUILDROOT + +To make truly static (Linux-) libraries, you might want to have a look at +buildroot (L). + +Buildroot is primarily meant to set up a cross-compile environment (which +is not so useful as perl doesn't quite like cross compiles), but it can also compile +a chroot environment where you can use F. + +To do so, download buildroot, and enable "Build options => development +files in target filesystem" and optionally "Build options => gcc +optimization level (optimize for size)". At the time of writing, I had +good experiences with GCC 4.4.x but not GCC 4.5. + +To minimise code size, I used C<-pipe -ffunction-sections -fdata-sections +-finline-limit=8 -fno-builtin-strlen -mtune=i386>. The C<-mtune=i386> +doesn't decrease codesize much, but it makes the file much more +compressible. + +If you don't need Coro or threads, you can go with "linuxthreads.old" (or +no thread support). For Coro, it is highly recommended to switch to a +uClibc newer than 0.9.31 (at the time of this writing, I used the 20101201 +snapshot) and enable NPTL, otherwise Coro needs to be configured with the +ultra-slow pthreads backend to work around linuxthreads bugs (it also uses +twice the address space needed for stacks). + +If you use C, then you should also be aware that +uClibc shares C between all threads when statically linking. See +L for a +workaround (And L for discussion). + +C support is also recommended, especially if you want +to play around with buildroot options. Enabling the C +package will probably enable all options required for a successful +perl build. F itself additionally needs either C +(recommended, for CPAN) or C. + +As for shells, busybox should provide all that is needed, but the default +busybox configuration doesn't include F which is needed by perl - +either make a custom busybox config, or compile coreutils. + +For the latter route, you might find that bash has some bugs that keep +it from working properly in a chroot - either use dash (and link it to +F inside the chroot) or link busybox to F, using it's +built-in ash shell. + +Finally, you need F inside the chroot for many scripts to work +- F or bind-mounting your F will +both provide this. + +After you have compiled and set up your buildroot target, you can copy +F from the C distribution or from your +perl f directory (if you installed it) into the F +filesystem, chroot inside and run it. + +=head1 RECIPES / SPECIFIC MODULES + +This section contains some common(?) recipes and information about +problems with some common modules or perl constructs that require extra +files to be included. + +=head2 MODULES + +=over 4 + +=item utf8 + +Some functionality in the utf8 module, such as swash handling (used +for unicode character ranges in regexes) is implemented in the +C<"utf8_heavy.pl"> library: + + -M'"utf8_heavy.pl"' + +Many Unicode properties in turn are defined in separate modules, +such as C<"unicore/Heavy.pl"> and more specific data tables such as +C<"unicore/To/Digit.pl"> or C<"unicore/lib/Perl/Word.pl">. These tables +are big (7MB uncompressed, although F contains special +handling for those files), so including them on demand by your application +only might pay off. + +To simply include the whole unicode database, use: + + --incglob '/unicore/*.pl' + +=item AnyEvent + +AnyEvent needs a backend implementation that it will load in a delayed +fashion. The L backend is the default choice +for AnyEvent if it can't find anything else, and is usually a safe +fallback. If you plan to use e.g. L (L...), then you need to +include the L (L...) backend as +well. + +If you want to handle IRIs or IDNs (L punycode and idn +functions), you also need to include C<"AnyEvent/Util/idna.pl"> and +C<"AnyEvent/Util/uts46data.pl">. + +Or you can use C<--usepacklist> and specify C<-MAnyEvent> to include +everything. + +=item Carp + +Carp had (in older versions of perl) a dependency on L. As of +perl 5.12.2 (maybe earlier), this dependency no longer exists. + +=item Config + +The F switch (as well as many modules) needs L, which in +turn might need L<"Config_heavy.pl">. Including the latter gives you +both. + +=item Term::ReadLine::Perl + +Also needs L, or C<--usepacklist>. + +=item URI + +URI implements schemes as separate modules - the generic URL scheme is +implemented in L, HTTP is implemented in L. If +you need to use any of these schemes, you should include these manually, +or use C<--usepacklist>. + +=back + +=head2 RECIPES + +=over 4 + +=item Linking everything in + +To link just about everything installed in the perl library into a new +perl, try this: + + staticperl mkperl --strip ppi --incglob '*' + +=item Getting rid of netdb function + +The perl core has lots of netdb functions (C, C +and so on) that few applications use. You can avoid compiling them in by +putting the following fragment into a C hook: + + preconfigure() { + for sym in \ + d_getgrnam_r d_endgrent d_endgrent_r d_endhent \ + d_endhostent_r d_endnent d_endnetent_r d_endpent \ + d_endprotoent_r d_endpwent d_endpwent_r d_endsent \ + d_endservent_r d_getgrent d_getgrent_r d_getgrgid_r \ + d_getgrnam_r d_gethbyaddr d_gethent d_getsbyport \ + d_gethostbyaddr_r d_gethostbyname_r d_gethostent_r \ + d_getlogin_r d_getnbyaddr d_getnbyname d_getnent \ + d_getnetbyaddr_r d_getnetbyname_r d_getnetent_r \ + d_getpent d_getpbyname d_getpbynumber d_getprotobyname_r \ + d_getprotobynumber_r d_getprotoent_r d_getpwent \ + d_getpwent_r d_getpwnam_r d_getpwuid_r d_getsent \ + d_getservbyname_r d_getservbyport_r d_getservent_r \ + d_getspnam_r d_getsbyname + # d_gethbyname + do + PERL_CONFIGURE="$PERL_CONFIGURE -U$sym" + done + } + +This mostly gains space when linking staticaly, as the functions will +liekly not be linked in. The gain for dynamically-linked binaries is +smaller. + +Also, this leaves C in - not only is it actually used +often, the L module also exposes it, so leaving it out usually +gains little. Why Socket exposes a C function that is in the core already +is anybody's guess. + +=back + =head1 AUTHOR Marc Lehmann