ViewVC Help

View File | Revision Log | Show Annotations | Download File

/cvs/App-Staticperl/staticperl.pod

Comparing App-Staticperl/staticperl.pod (file contents):
Revision 1.2 by root, Mon Dec 6 20:53:44 2010 UTC vs.
Revision 1.61 by root, Fri Oct 16 02:43:37 2015 UTC

1	=head1 NAME	1	=head1 NAME
2		2
3	staticperl - perl, libc, 50 modules all in one 500kb file	3	staticperl - perl, libc, 100 modules, all in one standalone 500kb file
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	staticperl help # print the embedded documentation	7	staticperl help # print the embedded documentation
8	staticperl fetch # fetch and unpack perl sources	8	staticperl fetch # fetch and unpack perl sources
9	staticperl configure # fetch and then configure perl	9	staticperl configure # fetch and then configure perl
10	staticperl build # configure and then build perl	10	staticperl build # configure and then build perl
11	staticperl install # build and then install perl	11	staticperl install # build and then install perl
12	staticperl clean # clean most intermediate files (restart at configure)	12	staticperl clean # clean most intermediate files (restart at configure)
13	staticperl distclean # delete everything installed by this script	13	staticperl distclean # delete everything installed by this script
		14	staticperl perl ... # invoke the perlinterpreter
14	staticperl cpan # invoke CPAN shell	15	staticperl cpan # invoke CPAN shell
15	staticperl instmod path... # install unpacked modules	16	staticperl instsrc path... # install unpacked modules
16	staticperl instcpan modulename... # install modules from CPAN	17	staticperl instcpan modulename... # install modules from CPAN
17	staticperl mkbundle <bundle-args...> # see documentation	18	staticperl mkbundle <bundle-args...> # see documentation
18	staticperl mkperl <bundle-args...> # see documentation	19	staticperl mkperl <bundle-args...> # see documentation
		20	staticperl mkapp appname <bundle-args...> # see documentation
19		21
20	Typical Examples:	22	Typical Examples:
21		23
22	staticperl install # fetch, configure, build and install perl	24	staticperl install # fetch, configure, build and install perl
23	staticperl cpan # run interactive cpan shell	25	staticperl cpan # run interactive cpan shell
24	staticperl mkperl -M '"Config_heavy.pl"' # build a perl that supports -V	26	staticperl mkperl -MConfig_heavy.pl # build a perl that supports -V
25	staticperl mkperl -MAnyEvent::Impl::Perl -MAnyEvent::HTTPD -MURI -MURI::http	27	staticperl mkperl -MAnyEvent::Impl::Perl -MAnyEvent::HTTPD -MURI -MURI::http
26	# build a perl with the above modules linked in	28	# build a perl with the above modules linked in
		29	staticperl mkapp myapp --boot mainprog mymodules
		30	# build a binary "myapp" from mainprog and mymodules
27		31
28	=head1 DESCRIPTION	32	=head1 DESCRIPTION
29		33
30	This script helps you creating single-file perl interpreters, or embedding	34	This script helps you to create single-file perl interpreters
31	a pelr interpreter in your apps. Single-file means that it is fully	35	or applications, or embedding a perl interpreter in your
32	self-contained - no separate shared objects, no autoload fragments, no .pm	36	applications. Single-file means that it is fully self-contained - no
		37	separate shared objects, no autoload fragments, no .pm or .pl files are
33	or .pl files are needed. And when linking statically, you can create (or	38	needed. And when linking statically, you can create (or embed) a single
34	embed) a single file that contains perl interpreter, libc, all the modules	39	file that contains perl interpreter, libc, all the modules you need, all
35	you need and all the libraries you need.	40	the libraries you need and of course your actual program.
36		41
37	With uclibc and upx on x86, you can create a single 500kb binary that	42	With F<uClibc> and F<upx> on x86, you can create a single 500kb binary
38	contains perl and 50 modules such as AnyEvent, EV, IO::AIO, Coro and so	43	that contains perl and 100 modules such as POSIX, AnyEvent, EV, IO::AIO,
39	on. Or any other choice of modules.	44	Coro and so on. Or any other choice of modules (and some other size :).
40		45
		46	To see how this turns out, you can try out smallperl and bigperl, two
		47	pre-built static and compressed perl binaries with many and even more
		48	modules: just follow the links at L<http://staticperl.schmorp.de/>.
		49
41	The created files do not need write access to the filesystem (like PAR	50	The created files do not need write access to the file system (like PAR
42	does). In fact, since this script is in many ways similar to PAR::Packer,	51	does). In fact, since this script is in many ways similar to PAR::Packer,
43	here are the differences:	52	here are the differences:
44		53
45	=over 4	54	=over 4
46		55
…		…
63	=item * The generated executables don't need a writable filesystem.	72	=item * The generated executables don't need a writable filesystem.
64		73
65	F<staticperl> loads all required files directly from memory. There is no	74	F<staticperl> loads all required files directly from memory. There is no
66	need to unpack files into a temporary directory.	75	need to unpack files into a temporary directory.
67		76
68	=item * More control over included files.	77	=item * More control over included files, more burden.
69		78
70	PAR tries to be maintainance and hassle-free - it tries to include more files	79	PAR tries to be maintenance and hassle-free - it tries to include more
71	than necessary to make sure everything works out of the box. The extra files	80	files than necessary to make sure everything works out of the box. It
		81	mostly succeeds at this, but he extra files (such as the unicode database)
72	(such as the unicode database) can take substantial amounts of memory and filesize.	82	can take substantial amounts of memory and file size.
73		83
74	With F<staticperl>, the burden is mostly with the developer - only direct	84	With F<staticperl>, the burden is mostly with the developer - only direct
75	compile-time dependencies and L<AutoLoader> are handled automatically.	85	compile-time dependencies and L<AutoLoader> are handled automatically.
76	This means the modules to include often need to be tweaked manually.	86	This means the modules to include often need to be tweaked manually.
		87
		88	All this does not preclude more permissive modes to be implemented in
		89	the future, but right now, you have to resolve hidden dependencies
		90	manually.
77		91
78	=item * PAR works out of the box, F<staticperl> does not.	92	=item * PAR works out of the box, F<staticperl> does not.
79		93
80	Maintaining your own custom perl build can be a pain in the ass, and while	94	Maintaining your own custom perl build can be a pain in the ass, and while
81	F<staticperl> tries to make this easy, it still requires a custom perl	95	F<staticperl> tries to make this easy, it still requires a custom perl
82	build and possibly fiddling with some modules. PAR is likely to produce	96	build and possibly fiddling with some modules. PAR is likely to produce
83	results faster.	97	results faster.
84		98
		99	Ok, PAR never has worked for me out of the box, and for some people,
		100	F<staticperl> does work out of the box, as they don't count "fiddling with
		101	module use lists" against it, but nevertheless, F<staticperl> is certainly
		102	a bit more difficult to use.
		103
85	=back	104	=back
86		105
87	=head1 HOW DOES IT WORK?	106	=head1 HOW DOES IT WORK?
88		107
89	Simple: F<staticperl> downloads, compile and installs a perl version of	108	Simple: F<staticperl> downloads, compile and installs a perl version of
90	your choice in F<~/.staticperl>. You can add extra modules either by	109	your choice in F<~/.staticperl>. You can add extra modules either by
91	letting F<staticperl> install them for you automatically, or by using CPAN	110	letting F<staticperl> install them for you automatically, or by using CPAN
92	and doing it interactively. This usually takes 5-10 minutes, depending on	111	and doing it interactively. This usually takes 5-10 minutes, depending on
93	the speed of your computer and your internet conenction.	112	the speed of your computer and your internet connection.
94		113
95	It is possible to do program development at this stage, too.	114	It is possible to do program development at this stage, too.
96		115
97	Afterwards, you create a list of files and modules you want to include,	116	Afterwards, you create a list of files and modules you want to include,
98	and then either build a new perl binary (that acts just like a normla perl	117	and then either build a new perl binary (that acts just like a normal perl
99	except everything is compiled in), or you create bundle files (basically C	118	except everything is compiled in), or you create bundle files (basically C
100	sources you can use to embed all files into your project).	119	sources you can use to embed all files into your project).
101		120
102	This step is very fast (a few seconds if PPI is not used for stripping,	121	This step is very fast (a few seconds if PPI is not used for stripping, or
103	more seconds otherwise, as PPI is very slow), and can be tweaked and	122	the stripped files are in the cache), and can be tweaked and repeated as
104	repeated as often as necessary.	123	often as necessary.
105		124
106	=head1 THE F<STATICPERL> SCRIPT	125	=head1 THE F<STATICPERL> SCRIPT
107		126
108	This module installs a script called F<staticperl> into your perl	127	This module installs a script called F<staticperl> into your perl
109	binary directory. The script is fully self-contained, and can be used	128	binary directory. The script is fully self-contained, and can be
110	without perl (for example, in an uClibc chroot environment). In fact,	129	used without perl (for example, in an uClibc chroot environment). In
111	it can be extracted from the C<App::Staticperl> distribution tarball as	130	fact, it can be extracted from the C<App::Staticperl> distribution
112	F<bin/staticperl>, without any installation.	131	tarball as F<bin/staticperl>, without any installation. The
		132	newest (possibly alpha) version can also be downloaded from
		133	L<http://staticperl.schmorp.de/staticperl>.
113		134
114	F<staticperl> interprets the first argument as a command to execute,	135	F<staticperl> interprets the first argument as a command to execute,
115	optionally followed by any parameters.	136	optionally followed by any parameters.
116		137
117	There are two command categories: the "phase 1" commands which deal with	138	There are two command categories: the "phase 1" commands which deal with
…		…
119	with creating binaries and bundle files.	140	with creating binaries and bundle files.
120		141
121	=head2 PHASE 1 COMMANDS: INSTALLING PERL	142	=head2 PHASE 1 COMMANDS: INSTALLING PERL
122		143
123	The most important command is F<install>, which does basically	144	The most important command is F<install>, which does basically
124	everything. The default is to download and install perl 5.12.2 and a few	145	everything. The default is to download and install perl 5.12.3 and a few
125	modules required by F<staticperl> itself, but all this can (and should) be	146	modules required by F<staticperl> itself, but all this can (and should) be
126	changed - see L<CONFIGURATION>, below.	147	changed - see L<CONFIGURATION>, below.
127		148
128	The command	149	The command
129		150
130	staticperl install	151	staticperl install
131		152
132	Is normally all you need: It installs the perl interpreter in	153	is normally all you need: It installs the perl interpreter in
133	F<~/.staticperl/perl>. It downloads, configures, builds and installs the	154	F<~/.staticperl/perl>. It downloads, configures, builds and installs the
134	perl interpreter if required.	155	perl interpreter if required.
135		156
136	Most of the following commands simply run one or more steps of this	157	Most of the following F<staticperl> subcommands simply run one or more
137	sequence.	158	steps of this sequence.
138		159
		160	If it fails, then most commonly because the compiler options I selected
		161	are not supported by your compiler - either edit the F<staticperl> script
		162	yourself or create F<~/.staticperl> shell script where your set working
		163	C<PERL_CCFLAGS> etc. variables.
		164
139	To force recompilation or reinstalaltion, you need to run F<staticperl	165	To force recompilation or reinstallation, you need to run F<staticperl
140	distclean> first.	166	distclean> first.
141		167
142	=over 4	168	=over 4
		169
		170	=item F<staticperl version>
		171
		172	Prints some info about the version of the F<staticperl> script you are using.
143		173
144	=item F<staticperl fetch>	174	=item F<staticperl fetch>
145		175
146	Runs only the download and unpack phase, unless this has already happened.	176	Runs only the download and unpack phase, unless this has already happened.
147		177
…		…
154	Builds the configured perl sources, potentially after automatically	184	Builds the configured perl sources, potentially after automatically
155	configuring them.	185	configuring them.
156		186
157	=item F<staticperl install>	187	=item F<staticperl install>
158		188
159	Wipes the perl installation directory (usually F<~/.staticperl/perl>) and installs	189	Wipes the perl installation directory (usually F<~/.staticperl/perl>) and
160	the perl distribution, potentially aftering building it first.	190	installs the perl distribution, potentially after building it first.
		191
		192	=item F<staticperl perl> [args...]
		193
		194	Invokes the compiled perl interpreter with the given args. Basically the
		195	same as starting perl directly (usually via F<~/.staticperl/bin/perl>),
		196	but beats typing the path sometimes.
		197
		198	Example: check that the Gtk2 module is installed and loadable.
		199
		200	staticperl perl -MGtk2 -e0
161		201
162	=item F<staticperl cpan> [args...]	202	=item F<staticperl cpan> [args...]
163		203
164	Starts an interactive CPAN shell that you cna use to install further	204	Starts an interactive CPAN shell that you can use to install further
165	modules. Installs the perl first if neccessary, but apart from that,	205	modules. Installs the perl first if necessary, but apart from that,
166	no magic is involved: you could just as well run it manually via	206	no magic is involved: you could just as well run it manually via
167	F<~/.staticperl/perl/bin/cpan>.	207	F<~/.staticperl/perl/bin/cpan>, except that F<staticperl> additionally
		208	sets the environment variable C<$PERL> to the path of the perl
		209	interpreter, which is handy in subshells.
168		210
169	Any additional arguments are simply passed to the F<cpan> command.	211	Any additional arguments are simply passed to the F<cpan> command.
170		212
171	=item F<staticperl instcpan> module...	213	=item F<staticperl instcpan> module...
172		214
…		…
177	staticperl instcpan EV AnyEvent::HTTPD Coro	219	staticperl instcpan EV AnyEvent::HTTPD Coro
178		220
179	=item F<staticperl instsrc> directory...	221	=item F<staticperl instsrc> directory...
180		222
181	In the unlikely case that you have unpacked perl modules around and want	223	In the unlikely case that you have unpacked perl modules around and want
182	to install from these instead of from CPAN, you cna do this using this	224	to install from these instead of from CPAN, you can do this using this
183	command by specifying all the directories with modules in them that you	225	command by specifying all the directories with modules in them that you
184	want to have built.	226	want to have built.
185		227
186	=item F<staticperl clean>	228	=item F<staticperl clean>
187		229
188	Runs F<make distclean> in the perl source directory (and potentially	230	Deletes the perl source directory (and potentially cleans up other
189	cleans up other intermediate files). This can be used to clean up	231	intermediate files). This can be used to clean up files only needed for
190	intermediate files without removing the installed perl interpreter.	232	building perl, without removing the installed perl interpreter.
		233
		234	At the moment, it doesn't delete downloaded tarballs.
		235
		236	The exact semantics of this command will probably change.
191		237
192	=item F<staticperl distclean>	238	=item F<staticperl distclean>
193		239
194	This wipes your complete F<~/.staticperl> directory. Be careful with this,	240	This wipes your complete F<~/.staticperl> directory. Be careful with this,
195	it nukes your perl download, perl sources, perl distribution and any	241	it nukes your perl download, perl sources, perl distribution and any
…		…
210	In the oh so unlikely case of something not working here, you	256	In the oh so unlikely case of something not working here, you
211	can run the script manually as well (by default it is written to	257	can run the script manually as well (by default it is written to
212	F<~/.staticperl/mkbundle>).	258	F<~/.staticperl/mkbundle>).
213		259
214	F<mkbundle> is a more conventional command and expect the argument	260	F<mkbundle> is a more conventional command and expect the argument
215	syntax commonly used on unix clones. For example, this command builds	261	syntax commonly used on UNIX clones. For example, this command builds
216	a new F<perl> binary and includes F<Config.pm> (for F<perl -V>),	262	a new F<perl> binary and includes F<Config.pm> (for F<perl -V>),
217	F<AnyEvent::HTTPD>, F<URI> and a custom F<httpd> script (from F<eg/httpd>	263	F<AnyEvent::HTTPD>, F<URI> and a custom F<httpd> script (from F<eg/httpd>
218	in this distribution):	264	in this distribution):
219		265
220	# first make sure we have perl and the required modules	266	# first make sure we have perl and the required modules
221	staticperl instcpan AnyEvent::HTTPD	267	staticperl instcpan AnyEvent::HTTPD
222		268
223	# now build the perl	269	# now build the perl
224	staticperl mkperl -M'"Config_heavy.pl"' -MAnyEvent::Impl::Perl \	270	staticperl mkperl -MConfig_heavy.pl -MAnyEvent::Impl::Perl \
225	-MAnyEvent::HTTPD -MURI::http \	271	-MAnyEvent::HTTPD -MURI::http \
226	--add 'eg/httpd httpd.pm'	272	--add 'eg/httpd httpd.pm'
227		273
228	# finally, invoke it	274	# finally, invoke it
229	./perl -Mhttpd	275	./perl -Mhttpd
230		276
231	As you can see, things are not quite as trivial: the L<Config> module has	277	As you can see, things are not quite as trivial: the L<Config> module has
232	a hidden dependency which is not even a perl module (F<Config_heavy.pl>),	278	a hidden dependency which is not even a perl module (F<Config_heavy.pl>),
233	L<AnyEvent> needs at least one event loop backend that we have to	279	L<AnyEvent> needs at least one event loop backend that we have to
234	specifymanually (here L<AnyEvent::Impl::Perl>), and the F<URI> module	280	specify manually (here L<AnyEvent::Impl::Perl>), and the F<URI> module
235	(required by L<AnyEvent::HTTPD>) implements various URI schemes as extra	281	(required by L<AnyEvent::HTTPD>) implements various URI schemes as extra
236	modules - since L<AnyEvent::HTTPD> only needs C<http> URIs, we only need	282	modules - since L<AnyEvent::HTTPD> only needs C<http> URIs, we only need
237	to include that module.	283	to include that module. I found out about these dependencies by carefully
		284	watching any error messages about missing modules...
		285
		286	Instead of building a new perl binary, you can also build a standalone
		287	application:
		288
		289	# build the app
		290	staticperl mkapp app --boot eg/httpd \
		291	-MAnyEvent::Impl::Perl -MAnyEvent::HTTPD -MURI::http
		292
		293	# run it
		294	./app
		295
		296	Here are the three phase 2 commands:
		297
		298	=over 4
		299
		300	=item F<staticperl mkbundle> args...
		301
		302	The "default" bundle command - it interprets the given bundle options and
		303	writes out F<bundle.h>, F<bundle.c>, F<bundle.ccopts> and F<bundle.ldopts>
		304	files, useful for embedding.
		305
		306	=item F<staticperl mkperl> args...
		307
		308	Creates a bundle just like F<staticperl mkbundle> (in fact, it's the same
		309	as invoking F<staticperl mkbundle --perl> args...), but then compiles and
		310	links a new perl interpreter that embeds the created bundle, then deletes
		311	all intermediate files.
		312
		313	=item F<staticperl mkapp> filename args...
		314
		315	Does the same as F<staticperl mkbundle> (in fact, it's the same as
		316	invoking F<staticperl mkbundle --app> filename args...), but then compiles
		317	and links a new standalone application that simply initialises the perl
		318	interpreter.
		319
		320	The difference to F<staticperl mkperl> is that the standalone application
		321	does not act like a perl interpreter would - in fact, by default it would
		322	just do nothing and exit immediately, so you should specify some code to
		323	be executed via the F<--boot> option.
		324
		325	=back
238		326
239	=head3 OPTION PROCESSING	327	=head3 OPTION PROCESSING
240		328
241	All options can be given as arguments on the commandline (typically using	329	All options can be given as arguments on the command line (typically
242	long (e.g. C<--verbose>) or short option (e.g. C<-v>) style). Since	330	using long (e.g. C<--verbose>) or short option (e.g. C<-v>) style). Since
243	specifying a lot of modules can make the commandlien very cumbersome,	331	specifying a lot of options can make the command line very long and
244	you can put all long options into a "bundle specification file" (with or	332	unwieldy, you can put all long options into a "bundle specification file"
245	without C<--> prefix) and specify this bundle file instead.	333	(one option per line, with or without C<--> prefix) and specify this
		334	bundle file instead.
246		335
247	For example, the command given earlier could also look like this:	336	For example, the command given earlier to link a new F<perl> could also
		337	look like this:
248		338
249	staticperl mkperl httpd.bundle	339	staticperl mkperl httpd.bundle
250		340
251	And all options could be in F<httpd.bundle>:	341	With all options stored in the F<httpd.bundle> file (one option per line,
252		342	everything after the option is an argument):
		343
253	use "Config_heavy.pl"	344	use "Config_heavy.pl"
254	use AnyEvent::Impl::Perl	345	use AnyEvent::Impl::Perl
255	use AnyEvent::HTTPD	346	use AnyEvent::HTTPD
256	use URI::http	347	use URI::http
257	add eg/httpd httpd.pm	348	add eg/httpd httpd.pm
258		349
259	All options that specify modules or files to be added are processed in the	350	All options that specify modules or files to be added are processed in the
260	order given on the commandline (that affects the C<--use> and C<--eval>	351	order given on the command line.
261	options at the moment).
262		352
263	=head3 MKBUNDLE OPTIONS	353	=head3 BUNDLE CREATION WORKFLOW / STATICPERL MKBUNDLE OPTIONS
264		354
265	=over 4	355	F<staticperl mkbundle> works by first assembling a list of candidate
		356	files and modules to include, then filtering them by include/exclude
		357	patterns. The remaining modules (together with their direct dependencies,
		358	such as link libraries and L<AutoLoader> files) are then converted into
		359	bundle files suitable for embedding. F<staticperl mkbundle> can then
		360	optionally build a new perl interpreter or a standalone application.
266		361
		362	=over 4
		363
		364	=item Step 0: Generic argument processing.
		365
		366	The following options influence F<staticperl mkbundle> itself.
		367
		368	=over 4
		369
267	=item --verbose | -v	370	=item C<--verbose> | C<-v>
268		371
269	Increases the verbosity level by one (the default is C<1>).	372	Increases the verbosity level by one (the default is C<1>).
270		373
271	=item --quiet | -q	374	=item C<--quiet> | C<-q>
272		375
273	Decreases the verbosity level by one.	376	Decreases the verbosity level by one.
274		377
		378	=item any other argument
		379
		380	Any other argument is interpreted as a bundle specification file, which
		381	supports all options (without extra quoting), one option per line, in the
		382	format C<option> or C<option argument>. They will effectively be expanded
		383	and processed as if they were directly written on the command line, in
		384	place of the file name.
		385
		386	=back
		387
		388	=item Step 1: gather candidate files and modules
		389
		390	In this step, modules, perl libraries (F<.pl> files) and other files are
		391	selected for inclusion in the bundle. The relevant options are executed
		392	in order (this makes a difference mostly for C<--eval>, which can rely on
		393	earlier C<--use> options to have been executed).
		394
		395	=over 4
		396
		397	=item C<--use> F<module> | C<-M>F<module>
		398
		399	Include the named module or perl library and trace direct
		400	dependencies. This is done by loading the module in a subprocess and
		401	tracing which other modules and files it actually loads.
		402
		403	Example: include AnyEvent and AnyEvent::Impl::Perl.
		404
		405	staticperl mkbundle --use AnyEvent --use AnyEvent::Impl::Perl
		406
		407	Sometimes you want to load old-style "perl libraries" (F<.pl> files), or
		408	maybe other weirdly named files. To support this, the C<--use> option
		409	actually tries to do what you mean, depending on the string you specify:
		410
		411	=over 4
		412
		413	=item a possibly valid module name, e.g. F<common::sense>, F<Carp>,
		414	F<Coro::Mysql>.
		415
		416	If the string contains no quotes, no F</> and no F<.>, then C<--use>
		417	assumes that it is a normal module name. It will create a new package and
		418	evaluate a C<use module> in it, i.e. it will load the package and do a
		419	default import.
		420
		421	The import step is done because many modules trigger more dependencies
		422	when something is imported than without.
		423
		424	=item anything that contains F</> or F<.> characters,
		425	e.g. F<utf8_heavy.pl>, F<Module/private/data.pl>.
		426
		427	The string will be quoted and passed to require, as if you used C<require
		428	$module>. Nothing will be imported.
		429
		430	=item "path" or 'path', e.g. C<"utf8_heavy.pl">.
		431
		432	If you enclose the name into single or double quotes, then the quotes will
		433	be removed and the resulting string will be passed to require. This syntax
		434	is form compatibility with older versions of staticperl and should not be
		435	used anymore.
		436
		437	=back
		438
		439	Example: C<use> AnyEvent::Socket, once using C<use> (importing the
		440	symbols), and once via C<require>, not importing any symbols. The first
		441	form is preferred as many modules load some extra dependencies when asked
		442	to export symbols.
		443
		444	staticperl mkbundle -MAnyEvent::Socket # use + import
		445	staticperl mkbundle -MAnyEvent/Socket.pm # require only
		446
		447	Example: include the required files for F<perl -V> to work in all its
		448	glory (F<Config.pm> is included automatically by the dependency tracker).
		449
		450	# shell command
		451	staticperl mkbundle -MConfig_heavy.pl
		452
		453	# bundle specification file
		454	use Config_heavy.pl
		455
		456	The C<-M>module syntax is included as a convenience that might be easier
		457	to remember than C<--use> - it's the same switch as perl itself uses
		458	to load modules. Or maybe it confuses people. Time will tell. Or maybe
		459	not. Sigh.
		460
		461	=item C<--eval> "perl code" | C<-e> "perl code"
		462
		463	Sometimes it is easier (or necessary) to specify dependencies using perl
		464	code, or maybe one of the modules you use need a special use statement. In
		465	that case, you can use C<--eval> to execute some perl snippet or set some
		466	variables or whatever you need. All files C<require>'d or C<use>'d while
		467	executing the snippet are included in the final bundle.
		468
		469	Keep in mind that F<mkbundle> will not import any symbols from the modules
		470	named by the C<--use> option, so do not expect the symbols from modules
		471	you C<--use>'d earlier on the command line to be available.
		472
		473	Example: force L<AnyEvent> to detect a backend and therefore include it
		474	in the final bundle.
		475
		476	staticperl mkbundle --eval 'use AnyEvent; AnyEvent::detect'
		477
		478	# or like this
		479	staticperl mkbundle -MAnyEvent --eval 'AnyEvent::detect'
		480
		481	Example: use a separate "bootstrap" script that C<use>'s lots of modules
		482	and also include this in the final bundle, to be executed automatically
		483	when the interpreter is initialised.
		484
		485	staticperl mkbundle --eval 'do "bootstrap"' --boot bootstrap
		486
		487	=item C<--boot> F<filename>
		488
		489	Include the given file in the bundle and arrange for it to be
		490	executed (using C<require>) before the main program when the new perl
		491	is initialised. This can be used to modify C<@INC> or do similar
		492	modifications before the perl interpreter executes scripts given on the
		493	command line (or via C<-e>). This works even in an embedded interpreter -
		494	the file will be executed during interpreter initialisation in that case.
		495
		496	=item C<--incglob> pattern
		497
		498	This goes through all standard library directories and tries to match any
		499	F<.pm> and F<.pl> files against the extended glob pattern (see below). If
		500	a file matches, it is added. The pattern is matched against the full path
		501	of the file (sans the library directory prefix), e.g. F<Sys/Syslog.pm>.
		502
		503	This is very useful to include "everything":
		504
		505	--incglob '*'
		506
		507	It is also useful for including perl libraries, or trees of those, such as
		508	the unicode database files needed by some perl built-ins, the regex engine
		509	and other modules.
		510
		511	--incglob '/unicore/**.pl'
		512
		513	=item C<--add> F<file> | C<--add> "F<file> alias"
		514
		515	Adds the given (perl) file into the bundle (and optionally call it
		516	"alias"). The F<file> is either an absolute path or a path relative to the
		517	current directory. If an alias is specified, then this is the name it will
		518	use for C<@INC> searches, otherwise the path F<file> will be used as the
		519	internal name.
		520
		521	This switch is used to include extra files into the bundle.
		522
		523	Example: embed the file F<httpd> in the current directory as F<httpd.pm>
		524	when creating the bundle.
		525
		526	staticperl mkperl --add "httpd httpd.pm"
		527
		528	# can be accessed via "use httpd"
		529
		530	Example: add a file F<initcode> from the current directory.
		531
		532	staticperl mkperl --add 'initcode &initcode'
		533
		534	# can be accessed via "do '&initcode'"
		535
		536	Example: add local files as extra modules in the bundle.
		537
		538	# specification file
		539	add file1 myfiles/file1.pm
		540	add file2 myfiles/file2.pm
		541	add file3 myfiles/file3.pl
		542
		543	# then later, in perl, use
		544	use myfiles::file1;
		545	require myfiles::file2;
		546	my $res = do "myfiles/file3.pl";
		547
		548	=item C<--addbin> F<file> | C<--addbin> "F<file> alias"
		549
		550	Just like C<--add>, except that it treats the file as binary and adds it
		551	without any postprocessing (perl files might get stripped to reduce their
		552	size).
		553
		554	If you specify an alias you should probably add a C</> prefix to avoid
		555	clashing with embedded perl files (whose paths never start with C</>),
		556	and/or use a special directory prefix, such as C</res/name>.
		557
		558	You can later get a copy of these files by calling C<static::find
		559	"alias">.
		560
		561	An alternative way to embed binary files is to convert them to perl and
		562	use C<do> to get the contents - this method is a bit cumbersome, but works
		563	both inside and outside of a staticperl bundle, without extra ado:
		564
		565	# a "binary" file, call it "bindata.pl"
		566	<<'SOME_MARKER'
		567	binary data NOT containing SOME_MARKER
		568	SOME_MARKER
		569
		570	# load the binary
		571	chomp (my $data = do "bindata.pl");
		572
		573	=item C<--allow-dynamic>
		574
		575	By default, when F<mkbundle> hits a dynamic perl extension (e.g. a F<.so>
		576	or F<.dll> file), it will stop with a fatal error.
		577
		578	When this option is enabled, F<mkbundle> packages the shared
		579	object into the bundle instead, with a prefix of F<!>
		580	(e.g. F<!auto/List/Util/Util.so>). What you do with that is currently up
		581	to you, F<staticperl> has no special support for this at the moment, apart
		582	from working around the lack of availability of F<PerlIO::scalar> while
		583	bootstrapping, at a speed cost.
		584
		585	One way to deal with this is to write all files starting with F<!> into
		586	some directory and then C<unshift> that path onto C<@INC>.
		587
		588	#TODO: example
		589
		590	=back
		591
		592	=item Step 2: filter all files using C<--include> and C<--exclude> options.
		593
		594	After all candidate files and modules are added, they are I<filtered>
		595	by a combination of C<--include> and C<--exclude> patterns (there is an
		596	implicit C<--include *> at the end, so if no filters are specified, all
		597	files are included).
		598
		599	All that this step does is potentially reduce the number of files that are
		600	to be included - no new files are added during this step.
		601
		602	=over 4
		603
		604	=item C<--include> pattern | C<-i> pattern | C<--exclude> pattern | C<-x> pattern
		605
		606	These specify an include or exclude pattern to be applied to the candidate
		607	file list. An include makes sure that the given files will be part of the
		608	resulting file set, an exclude will exclude remaining files. The patterns
		609	are "extended glob patterns" (see below).
		610
		611	The patterns are applied "in order" - files included via earlier
		612	C<--include> specifications cannot be removed by any following
		613	C<--exclude>, and likewise, and file excluded by an earlier C<--exclude>
		614	cannot be added by any following C<--include>.
		615
		616	For example, to include everything except C<Devel> modules, but still
		617	include F<Devel::PPPort>, you could use this:
		618
		619	--incglob '*' -i '/Devel/PPPort.pm' -x '/Devel/**'
		620
		621	=back
		622
		623	=item Step 3: add any extra or "hidden" dependencies.
		624
		625	F<staticperl> currently knows about three extra types of depdendencies
		626	that are added automatically. Only one (F<.packlist> files) is currently
		627	optional and can be influenced, the others are always included:
		628
		629	=over 4
		630
		631	=item C<--usepacklists>
		632
		633	Read F<.packlist> files for each distribution that happens to match a
		634	module name you specified. Sounds weird, and it is, so expect semantics to
		635	change somehow in the future.
		636
		637	The idea is that most CPAN distributions have a F<.pm> file that matches
		638	the name of the distribution (which is rather reasonable after all).
		639
		640	If this switch is enabled, then if any of the F<.pm> files that have been
		641	selected match an install distribution, then all F<.pm>, F<.pl>, F<.al>
		642	and F<.ix> files installed by this distribution are also included.
		643
		644	For example, using this switch, when the L<URI> module is specified, then
		645	all L<URI> submodules that have been installed via the CPAN distribution
		646	are included as well, so you don't have to manually specify them.
		647
		648	=item L<AutoLoader> splitfiles
		649
		650	Some modules use L<AutoLoader> - less commonly (hopefully) used functions
		651	are split into separate F<.al> files, and an index (F<.ix>) file contains
		652	the prototypes.
		653
		654	Both F<.ix> and F<.al> files will be detected automatically and added to
		655	the bundle.
		656
		657	=item link libraries (F<.a> files)
		658
		659	Modules using XS (or any other non-perl language extension compiled at
		660	installation time) will have a static archive (typically F<.a>). These
		661	will automatically be added to the linker options in F<bundle.ldopts>.
		662
		663	Should F<staticperl> find a dynamic link library (typically F<.so>) it
		664	will warn about it - obviously this shouldn't happen unless you use
		665	F<staticperl> on the wrong perl, or one (probably wrongly) configured to
		666	use dynamic loading.
		667
		668	=item extra libraries (F<extralibs.ld>)
		669
		670	Some modules need linking against external libraries - these are found in
		671	F<extralibs.ld> and added to F<bundle.ldopts>.
		672
		673	=back
		674
		675	=item Step 4: write bundle files and optionally link a program
		676
		677	At this point, the select files will be read, processed (stripped) and
		678	finally the bundle files get written to disk, and F<staticperl mkbundle>
		679	is normally finished. Optionally, it can go a step further and either link
		680	a new F<perl> binary with all selected modules and files inside, or build
		681	a standalone application.
		682
		683	Both the contents of the bundle files and any extra linking is controlled
		684	by these options:
		685
		686	=over 4
		687
275	=item --strip none|pod|ppi	688	=item C<--strip> C<none>|C<pod>|C<ppi>
276		689
277	Specify the stripping method applied to reduce the file of the perl	690	Specify the stripping method applied to reduce the file of the perl
278	sources included.	691	sources included.
279		692
280	The default is C<pod>, which uses the L<Pod::Strip> module to remove all	693	The default is C<pod>, which uses the L<Pod::Strip> module to remove all
281	pod documenatiton, which is very fast and reduces filesize a lot.	694	pod documentation, which is very fast and reduces file size a lot.
282		695
283	The C<ppi> method uses L<PPI> to parse and condense the perl sources. This	696	The C<ppi> method uses L<PPI> to parse and condense the perl sources. This
284	saves a lot more than just L<Pod::Strip>, and is generally safer, but is	697	saves a lot more than just L<Pod::Strip>, and is generally safer,
285	also a lot slower, so is best used for production builds.	698	but is also a lot slower (some files take almost a minute to strip -
		699	F<staticperl> maintains a cache of stripped files to speed up subsequent
		700	runs for this reason). Note that this method doesn't optimise for raw file
		701	size, but for best compression (that means that the uncompressed file size
		702	is a bit larger, but the files compress better, e.g. with F<upx>).
286		703
		704	Last not least, if you need accurate line numbers in error messages,
287	Last not least, in the unlikely case where C<pod> is too slow, or some	705	or in the unlikely case where C<pod> is too slow, or some module gets
288	module gets mistreated, you can specify C<none> to not mangle included	706	mistreated, you can specify C<none> to not mangle included perl sources in
289	perl sources in any way.	707	any way.
290		708
291	=item --perl	709	=item C<--perl>
292		710
293	After writing out the bundle files, try to link a new perl interpreter. It	711	After writing out the bundle files, try to link a new perl interpreter. It
294	will be called F<perl> and will be left in the current working	712	will be called F<perl> and will be left in the current working
295	directory. The bundle files will be removed.	713	directory. The bundle files will be removed.
296		714
297	This switch is automatically ued when F<staticperl> is invoked with the	715	This switch is automatically used when F<staticperl> is invoked with the
298	C<mkperl> command (instead of C<mkbundle>):	716	C<mkperl> command instead of C<mkbundle>.
299		717
300	# build a new ./perl with only common::sense in it - very small :)	718	Example: build a new F<./perl> binary with only L<common::sense> inside -
		719	it will be even smaller than the standard perl interpreter as none of the
		720	modules of the base distribution (such as L<Fcntl>) will be included.
		721
301	staticperl mkperl -Mcommon::sense	722	staticperl mkperl -Mcommon::sense
302		723
303	=item --use module | -Mmodule	724	=item C<--app> F<name>
304		725
305	Include the named module and all direct dependencies. This is done by	726	After writing out the bundle files, try to link a new standalone
306	C<require>'ing the module in a subprocess and tracing which other modules	727	program. It will be called C<name>, and the bundle files get removed after
307	and files it actually loads. If the module uses L<AutoLoader>, then all	728	linking it.
308	splitfiles will be included as well.
309		729
310	Example: include AnyEvent and AnyEvent::Impl::Perl.	730	This switch is automatically used when F<staticperl> is invoked with the
		731	C<mkapp> command instead of C<mkbundle>.
311		732
312	staticperl mkbundle --use AnyEvent --use AnyEvent::Impl::Perl	733	The difference to the (mutually exclusive) C<--perl> option is that the
		734	binary created by this option will not try to act as a perl interpreter -
		735	instead it will simply initialise the perl interpreter, clean it up and
		736	exit.
313		737
314	Sometimes you want to load old-style "perl libraries" (F<.pl> files), or	738	This means that, by default, it will do nothing but burn a few CPU cycles
315	maybe other weirdly named files. To do that, you need to quote the name in	739	- for it to do something useful you I<must> add some boot code, e.g. with
316	single or double quoutes. When given on the commandline, you probably need	740	the C<--boot> option.
317	to quote once more to avoid your shell interpreting it. Common cases that
318	need this are F<Config_heavy.pl> and F<utf8_heavy.pl>.
319		741
320	Example: include the required files for F<perl -V> to work in all its	742	Example: create a standalone perl binary called F<./myexe> that will
321	glory (F<Config.pm> is included automatically by this).	743	execute F<appfile> when it is started.
322		744
323	# bourne shell	745	staticperl mkbundle --app myexe --boot appfile
324	staticperl mkbundle --use '"Config_heavy.pl"'
325		746
326	# bundle specification file	747	=item C<--ignore-env>
327	use "Config_heavy.pl"
328		748
329	The C<-Mmodule> syntax is included as an alias that might be easier to	749	Generates extra code to unset some environment variables before
330	remember than C<use>. Or maybe it confuses people. Time will tell. Or	750	initialising/running perl. Perl supports a lot of environment variables
331	maybe not. Argh.	751	that might alter execution in ways that might be undesirablre for
		752	standalone applications, and this option removes those known to cause
		753	trouble.
332		754
333	=item --eval "perl code" | -e "perl code"	755	Specifically, these are removed:
334		756
335	Sometimes it is easier (or necessary) to specify dependencies using perl	757	C<PERL_HASH_SEED_DEBUG> and C<PERL_DEBUG_MSTATS> can cause undesirable
336	code, or maybe one of the modules you use need a special use statement. In	758	output, C<PERL5OPT>, C<PERL_DESTRUCT_LEVEL>, C<PERL_HASH_SEED> and
337	that case, you can use C<eval> to execute some perl snippet or set some	759	C<PERL_SIGNALS> can alter execution significantly, and C<PERL_UNICODE>,
338	variables or whatever you need. All files C<require>'d or C<use>'d in the	760	C<PERLIO_DEBUG> and C<PERLIO> can affect input and output.
339	script are included in the final bundle.
340		761
341	Keep in mind that F<mkbundle> will only C<require> the modules named	762	The variables C<PERL_LIB> and C<PERL5_LIB> are always ignored because the
342	by the C<--use> option, so do not expect the symbols from modules you	763	startup code used by F<staticperl> overrides C<@INC> in all cases.
343	C<--use>'d earlier on the commandlien to be available.
344		764
345	Example: force L<AnyEvent> to detect a backend and therefore include it	765	This option will not make your program more secure (unless you are
346	in the final bundle.	766	running with elevated privileges), but it will reduce the surprise effect
		767	when a user has these environment variables set and doesn't expect your
		768	standalone program to act like a perl interpreter.
347		769
348	staticperl mkbundle --eval 'use AnyEvent; AnyEvent::detect'
349
350	# or like this
351	staticperl mkbundle -MAnyEvent --eval 'use AnyEvent; AnyEvent::detect'
352
353	Example: use a separate "bootstrap" script that C<use>'s lots of modules
354	and include this in the final bundle, to be executed automatically.
355
356	staticperl mkbundle --eval 'do "bootstrap"' --boot bootstrap
357
358	=item --boot filename
359
360	Include the given file in the bundle and arrange for it to be executed
361	(using a C<require>) before anything else when the new perl is
362	initialised. This can be used to modify C<@INC> or anything else before
363	the perl interpreter executes scripts given on the commandline (or via
364	C<-e>). This works even in an embedded interpreter.
365
366	=item --add "file" | --add "file alias"
367
368	Adds the given (perl) file into the bundle (and optionally call it
369	"alias"). This is useful to include any custom files into the bundle.
370
371	Example: embed the file F<httpd> as F<httpd.pm> when creating the bundle.
372
373	staticperl mkperl --add "httpd httpd.pm"
374
375	It is also a great way to add any custom modules:
376
377	# specification file
378	add file1 myfiles/file1
379	add file2 myfiles/file2
380	add file3 myfiles/file3
381
382	=item --static	770	=item C<--static>
383		771
384	When C<--perl> is also given, link statically instead of dynamically. The	772	Add C<-static> to F<bundle.ldopts>, which means a fully static (if
		773	supported by the OS) executable will be created. This is not immensely
		774	useful when just creating the bundle files, but is most useful when
		775	linking a binary with the C<--perl> or C<--app> options.
		776
385	default is to link the new perl interpreter fully dynamic (that means all	777	The default is to link the new binary dynamically (that means all perl
386	perl modules are linked statically, but all external libraries are still	778	modules are linked statically, but all external libraries are still
387	referenced dynamically).	779	referenced dynamically).
388		780
389	Keep in mind that Solaris doesn't support static linking at all, and	781	Keep in mind that Solaris doesn't support static linking at all, and
390	systems based on GNU libc don't really support it in a usable fashion	782	systems based on GNU libc don't really support it in a very usable
391	either. Try uClibc if you want to create fully statically linked	783	fashion either. Try uClibc if you want to create fully statically linked
392	executables, or try the C<--staticlibs> option to link only some libraries	784	executables, or try the C<--staticlib> option to link only some libraries
393	statically.	785	statically.
394		786
395	=item any other argument	787	=item C<--staticlib> libname
396		788
397	Any other argument is interpreted as a bundle specification file, which	789	When not linking fully statically, this option allows you to link specific
398	supports most long options (without extra quoting), one option per line.	790	libraries statically. What it does is simply replace all occurrences of
		791	C<-llibname> with the GCC-specific C<-Wl,-Bstatic -llibname -Wl,-Bdynamic>
		792	option.
399		793
400	=back	794	This will have no effect unless the library is actually linked against,
		795	specifically, C<--staticlib> will not link against the named library
		796	unless it would be linked against anyway.
401		797
		798	Example: link libcrypt statically into the final binary.
		799
		800	staticperl mkperl -MIO::AIO --staticlib crypt
		801
		802	# ldopts might now contain:
		803	# -lm -Wl,-Bstatic -lcrypt -Wl,-Bdynamic -lpthread
		804
		805	=back
		806
		807	=back
		808
		809	=head3 EXTENDED GLOB PATTERNS
		810
		811	Some options of F<staticperl mkbundle> expect an I<extended glob
		812	pattern>. This is neither a normal shell glob nor a regex, but something
		813	in between. The idea has been copied from rsync, and there are the current
		814	matching rules:
		815
		816	=over 4
		817
		818	=item Patterns starting with F</> will be a anchored at the root of the library tree.
		819
		820	That is, F</unicore> will match the F<unicore> directory in C<@INC>, but
		821	nothing inside, and neither any other file or directory called F<unicore>
		822	anywhere else in the hierarchy.
		823
		824	=item Patterns not starting with F</> will be anchored at the end of the path.
		825
		826	That is, F<idna.pl> will match any file called F<idna.pl> anywhere in the
		827	hierarchy, but not any directories of the same name.
		828
		829	=item A F<*> matches anything within a single path component.
		830
		831	That is, F</unicore/*.pl> would match all F<.pl> files directly inside
		832	C</unicore>, not any deeper level F<.pl> files. Or in other words, F<*>
		833	will not match slashes.
		834
		835	=item A F<**> matches anything.
		836
		837	That is, F</unicore/**.pl> would match all F<.pl> files under F</unicore>,
		838	no matter how deeply nested they are inside subdirectories.
		839
		840	=item A F<?> matches a single character within a component.
		841
		842	That is, F</Encode/??.pm> matches F</Encode/JP.pm>, but not the
		843	hypothetical F</Encode/J/.pm>, as F<?> does not match F</>.
		844
		845	=back
		846
402	=head2 F<STATCPERL> CONFIGURATION AND HOOKS	847	=head2 F<STATICPERL> CONFIGURATION AND HOOKS
403		848
404	During (each) startup, F<staticperl> tries to source the following shell	849	During (each) startup, F<staticperl> tries to source some shell files to
		850	allow you to fine-tune/override configuration settings.
		851
		852	In them you can override shell variables, or define shell functions
		853	("hooks") to be called at specific phases during installation. For
		854	example, you could define a C<postinstall> hook to install additional
		855	modules from CPAN each time you start from scratch.
		856
		857	If the env variable C<$STATICPERLRC> is set, then F<staticperl> will try
		858	to source the file named with it only. Otherwise, it tries the following
405	files in order:	859	shell files in order:
406		860
407	/etc/staticperlrc	861	/etc/staticperlrc
408	~/.staticperlrc	862	~/.staticperlrc
409	$STATICPERL/rc	863	$STATICPERL/rc
410		864
411	They can be used to override shell variables, or define functions to be
412	called at specific phases.
413
414	Note that the last file is erased during F<staticperl distclean>, so	865	Note that the last file is erased during F<staticperl distclean>, so
415	generally should not be used.	866	generally should not be used.
416		867
417	=head3 CONFIGURATION VARIABLES	868	=head3 CONFIGURATION VARIABLES
418		869
…		…
423	=item C<EMAIL>	874	=item C<EMAIL>
424		875
425	The e-mail address of the person who built this binary. Has no good	876	The e-mail address of the person who built this binary. Has no good
426	default, so should be specified by you.	877	default, so should be specified by you.
427		878
428	=back
429
430	=head4 Variables you I<might want> to override
431
432	=over 4
433
434	=item C<PERLVER>
435
436	The perl version to install - default is currently C<5.12.2>, but C<5.8.9>
437	is also a good choice (5.8.9 is much smaller than 5.12.2, while 5.10.1 is
438	about as big as 5.12.2).
439
440	=item C<CPAN>	879	=item C<CPAN>
441		880
442	The URL of the CPAN mirror to use (e.g. L<http://mirror.netcologne.de/cpan/>).	881	The URL of the CPAN mirror to use (e.g. L<http://mirror.netcologne.de/cpan/>).
443		882
		883	=item C<EXTRA_MODULES>
		884
		885	Additional modules installed during F<staticperl install>. Here you can
		886	set which modules you want have to installed from CPAN.
		887
		888	Example: I really really need EV, AnyEvent, Coro and AnyEvent::AIO.
		889
		890	EXTRA_MODULES="EV AnyEvent Coro AnyEvent::AIO"
		891
		892	Note that you can also use a C<postinstall> hook to achieve this, and
		893	more.
		894
		895	=back
		896
		897	=head4 Variables you might I<want> to override
		898
		899	=over 4
		900
		901	=item C<STATICPERL>
		902
		903	The directory where staticperl stores all its files
		904	(default: F<~/.staticperl>).
		905
		906	=item C<DLCACHE>
		907
		908	The path to a directory (will be created if it doesn't exist) where
		909	downloaded perl sources are being cached, to avoid downloading them
		910	again. The default is empty, which means there is no cache.
		911
		912	=item C<PERL_VERSION>
		913
		914	The perl version to install - C<5.12.5> is a good choice for small builds,
		915	but C<5.8.9> is also a good choice (5.8.9 is much smaller than 5.12.5), if
		916	it builds on your system.
		917
		918	You can also set this variable to the absolute URL of a tarball (F<.tar>,
		919	F<.tar.gz>, F<.tar.bz2>, F<.tar.lzma> or F<.tar.xz>), or to the absolute
		920	path of an unpacked perl source tree, which will be copied.
		921
		922	The default is currently
		923	F<http://stableperl.schmorp.de/dist/latest.tar.gz>, i.e. the latest
		924	stableperl release.
		925
		926	=item C<PERL_MM_USE_DEFAULT>, C<EV_EXTRA_DEFS>, ...
		927
		928	Usually set to C<1> to make modules "less inquisitive" during their
		929	installation. You can set (and export!) any environment variable you want
		930	- some modules (such as L<Coro> or L<EV>) use environment variables for
		931	further tweaking.
		932
		933	=item C<PERL_PREFIX>
		934
		935	The directory where perl gets installed (default: F<$STATICPERL/perl>),
		936	i.e. where the F<bin> and F<lib> subdirectories will end up. Previous
		937	contents will be removed on installation.
		938
		939	=item C<PERL_CONFIGURE>
		940
		941	Additional Configure options - these are simply passed to the perl
		942	Configure script. For example, if you wanted to enable dynamic loading,
		943	you could pass C<-Dusedl>. To enable ithreads (Why would you want that
		944	insanity? Don't! Use L<forks> instead!) you would pass C<-Duseithreads>
		945	and so on.
		946
		947	More commonly, you would either activate 64 bit integer support
		948	(C<-Duse64bitint>), or disable large files support (-Uuselargefiles), to
		949	reduce filesize further.
		950
444	=item C<PERL_CPPFLAGS>, C<PERL_OPTIMIZE>, C<PERL_LDFLAGS>, C<PERL_LIBS>	951	=item C<PERL_CC>, C<PERL_CCFLAGS>, C<PERL_OPTIMIZE>, C<PERL_LDFLAGS>, C<PERL_LIBS>
445		952
446	These flags are passed to perl's F<Configure> script, and are generally	953	These flags are passed to perl's F<Configure> script, and are generally
447	optimised for small size (at the cost of performance). Since they also	954	optimised for small size (at the cost of performance). Since they also
448	contain subtle workarounds around various build issues, changing these	955	contain subtle workarounds around various build issues, changing these
449	usually requires understanding their default values - best look at the top	956	usually requires understanding their default values - best look at
450	of the F<staticperl> script for more info on these.	957	the top of the F<staticperl> script for more info on these, and use a
		958	F<~/.staticperlrc> to override them.
451		959
452	=item C<STATICPERL>	960	Most of the variables override (or modify) the corresponding F<Configure>
		961	variable, except C<PERL_CCFLAGS>, which gets appended.
453		962
454	The directory where staticperl stores all its files	963	The default for C<PERL_OPTIMIZE> is C<-Os> (assuming gcc), and for
455	(default: F<~/.staticperl>).	964	C<PERL_LIBS> is C<-lm -lcrypt>, which should be good for most (but not
		965	all) systems.
456		966
457	=item C<PREFIX>	967	For other compilers or more customised optimisation settings, you need to
		968	adjust these, e.g. in your F<~/.staticperlrc>.
458		969
459	The prefix where perl get's installed (default: F<$STATICPERL/perl>),	970	With gcc on x86 and amd64, you can get more space-savings by using:
460	i.e. where the F<bin> and F<lib> subdirectories will end up.
461		971
462	=item C<PERL_MM_USE_DEFAULT>, C<EV_EXTRA_DEFS>, others	972	-Os -ffunction-sections -fdata-sections -finline-limit=8 -mpush-args
		973	-mno-inline-stringops-dynamically -mno-align-stringops
463		974
464	Usually set to C<1> to make modules "less inquisitive" during their	975	And on x86 and pentium3 and newer (basically everything you might ever
465	installation, you can set any environment variable you want - some modules	976	want to run on), adding these is even better for space-savings (use
466	(such as L<Coro> or L<EV>) use environment variables for further tweaking.	977	-mtune=core2 or something newer for much faster code, too):
467		978
468	=item C<EXTRA_MODULES>	979	-fomit-frame-pointer -march=pentium3 -mtune=i386
469		980
470	Additional modules installed during F<staticperl install>. Here you can
471	set which modules you want have to installed from CPAN.
472
473	Example: I really really need EV, AnyEvent, Coro and IO::AIO.
474
475	EXTRA_MODULES="EV AnyEvent Coro IO::AIO"
476
477	Note that you cna also use a C<postinstall> hook to achieve this, and
478	more.
479
480	=back	981	=back
481		982
482	=head4 Variables you I<probably do not want> to override	983	=head4 Variables you probably I<do not want> to override
483		984
484	=over 4	985	=over 4
		986
		987	=item C<MAKE>
		988
		989	The make command to use - default is C<make>.
485		990
486	=item C<MKBUNDLE>	991	=item C<MKBUNDLE>
487		992
488	Where F<staticperl> writes the C<mkbundle> command to	993	Where F<staticperl> writes the C<mkbundle> command to
489	(default: F<$STATICPERL/mkbundle>).	994	(default: F<$STATICPERL/mkbundle>).
…		…
497		1002
498	=head3 OVERRIDABLE HOOKS	1003	=head3 OVERRIDABLE HOOKS
499		1004
500	In addition to environment variables, it is possible to provide some	1005	In addition to environment variables, it is possible to provide some
501	shell functions that are called at specific times. To provide your own	1006	shell functions that are called at specific times. To provide your own
502	commands, justd efine the corresponding function.	1007	commands, just define the corresponding function.
		1008
		1009	The actual order in which hooks are invoked during a full install
		1010	from scratch is C<preconfigure>, C<patchconfig>, C<postconfigure>,
		1011	C<postbuild>, C<postinstall>.
503		1012
504	Example: install extra modules from CPAN and from some directories	1013	Example: install extra modules from CPAN and from some directories
505	at F<staticperl install> time.	1014	at F<staticperl install> time.
506		1015
507	postinstall() {	1016	postinstall() {
508	rm -rf lib/threads.* # weg mit Schaden	1017	rm -rf lib/threads* # weg mit Schaden
509	instcpan IO::AIO EV	1018	instcpan IO::AIO EV
510	instsrc ~/src/AnyEvent	1019	instsrc ~/src/AnyEvent
511	instsrc ~/src/XML-Sablotron-1.0100001	1020	instsrc ~/src/XML-Sablotron-1.0100001
512	instcpan AnyEvent::HTTPD	1021	instcpan Anyevent::AIO AnyEvent::HTTPD
513	}	1022	}
514		1023
515	=over 4	1024	=over 4
		1025
		1026	=item preconfigure
		1027
		1028	Called just before running F<./Configure> in the perl source
		1029	directory. Current working directory is the perl source directory.
		1030
		1031	This can be used to set any C<PERL_xxx> variables, which might be costly
		1032	to compute.
		1033
		1034	=item patchconfig
		1035
		1036	Called after running F<./Configure> in the perl source directory to create
		1037	F<./config.sh>, but before running F<./Configure -S> to actually apply the
		1038	config. Current working directory is the perl source directory.
		1039
		1040	Can be used to tailor/patch F<config.sh> or do any other modifications.
516		1041
517	=item postconfigure	1042	=item postconfigure
518		1043
519	Called after configuring, but before building perl. Current working	1044	Called after configuring, but before building perl. Current working
520	directory is the perl source directory.	1045	directory is the perl source directory.
521		1046
522	Could be used to tailor/patch config.sh (followed by F<./Configure -S>) or
523	do any other modifications.
524
525	=item postbuild	1047	=item postbuild
526		1048
527	Called after building, but before installing perl. Current working	1049	Called after building, but before installing perl. Current working
528	directory is the perl source directory.	1050	directory is the perl source directory.
529		1051
…		…
543	The script must return with a zero exit status, or the installation will	1065	The script must return with a zero exit status, or the installation will
544	fail.	1066	fail.
545		1067
546	=back	1068	=back
547		1069
		1070	=head1 ANATOMY OF A BUNDLE
		1071
		1072	When not building a new perl binary, C<mkbundle> will leave a number of
		1073	files in the current working directory, which can be used to embed a perl
		1074	interpreter in your program.
		1075
		1076	Intimate knowledge of L<perlembed> and preferably some experience with
		1077	embedding perl is highly recommended.
		1078
		1079	C<mkperl> (or the C<--perl> option) basically does this to link the new
		1080	interpreter (it also adds a main program to F<bundle.>):
		1081
		1082	$Config{cc} $(cat bundle.ccopts) -o perl bundle.c $(cat bundle.ldopts)
		1083
		1084	=over 4
		1085
		1086	=item bundle.h
		1087
		1088	A header file that contains the prototypes of the few symbols "exported"
		1089	by bundle.c, and also exposes the perl headers to the application.
		1090
		1091	=over 4
		1092
		1093	=item staticperl_init (xs_init = 0)
		1094
		1095	Initialises the perl interpreter. You can use the normal perl functions
		1096	after calling this function, for example, to define extra functions or
		1097	to load a .pm file that contains some initialisation code, or the main
		1098	program function:
		1099
		1100	XS (xsfunction)
		1101	{
		1102	dXSARGS;
		1103
		1104	// now we have items, ST(i) etc.
		1105	}
		1106
		1107	static void
		1108	run_myapp(void)
		1109	{
		1110	staticperl_init (0);
		1111	newXSproto ("myapp::xsfunction", xsfunction, __FILE__, "$$;$");
		1112	eval_pv ("require myapp::main", 1); // executes "myapp/main.pm"
		1113	}
		1114
		1115	When your bootcode already wants to access some XS functions at
		1116	compiletime, then you need to supply an C<xs_init> function pointer that
		1117	is called as soon as perl is initialised enough to define XS functions,
		1118	but before the preamble code is executed:
		1119
		1120	static void
		1121	xs_init (pTHX)
		1122	{
		1123	newXSproto ("myapp::xsfunction", xsfunction, __FILE__, "$$;$");
		1124	}
		1125
		1126	static void
		1127	run_myapp(void)
		1128	{
		1129	staticperl_init (xs_init);
		1130	}
		1131
		1132	=item staticperl_cleanup ()
		1133
		1134	In the unlikely case that you want to destroy the perl interpreter, here
		1135	is the corresponding function.
		1136
		1137	=item staticperl_xs_init (pTHX)
		1138
		1139	Sometimes you need direct control over C<perl_parse> and C<perl_run>, in
		1140	which case you do not want to use C<staticperl_init> but call them on your
		1141	own.
		1142
		1143	Then you need this function - either pass it directly as the C<xs_init>
		1144	function to C<perl_parse>, or call it as one of the first things from your
		1145	own C<xs_init> function.
		1146
		1147	=item PerlInterpreter *staticperl
		1148
		1149	The perl interpreter pointer used by staticperl. Not normally so useful,
		1150	but there it is.
		1151
		1152	=back
		1153
		1154	=item bundle.ccopts
		1155
		1156	Contains the compiler options required to compile at least F<bundle.c> and
		1157	any file that includes F<bundle.h> - you should probably use it in your
		1158	C<CFLAGS>.
		1159
		1160	=item bundle.ldopts
		1161
		1162	The linker options needed to link the final program.
		1163
		1164	=back
		1165
		1166	=head1 RUNTIME FUNCTIONALITY
		1167
		1168	Binaries created with C<mkbundle>/C<mkperl> contain extra functionality,
		1169	mostly related to the extra files bundled in the binary (the virtual
		1170	filesystem). All of this data is statically compiled into the binary, and
		1171	accessing means copying it from a read-only section of your binary. Data
		1172	pages in this way is usually freed by the operating system, as it isn't
		1173	use more the onace.
		1174
		1175	=head2 VIRTUAL FILESYSTEM
		1176
		1177	Every bundle has a virtual filesystem. The only information stored in it
		1178	is the path and contents of each file that was bundled.
		1179
		1180	=head3 LAYOUT
		1181
		1182	Any path starting with an ampersand (F<&>) or exclamation mark (F<!>) are
		1183	reserved by F<staticperl>. They must only be used as described in this
		1184	section.
		1185
		1186	=over 4
		1187
		1188	=item !
		1189
		1190	All files that typically cannot be loaded from memory (such as dynamic
		1191	objects or shared libraries), but have to reside in the filesystem, are
		1192	prefixed with F<!>. Typically these files get written out to some
		1193	(semi-)temporary directory shortly after program startup, or before being
		1194	used.
		1195
		1196	=item !boot
		1197
		1198	The bootstrap file, if specified during bundling.
		1199
		1200	=item !auto/
		1201
		1202	Shared objects or dlls corresponding to dynamically-linked perl extensions
		1203	are stored with an F<!auto/> prefix.
		1204
		1205	=item !lib/
		1206
		1207	External shared libraries are stored in this directory.
		1208
		1209	=item any letter
		1210
		1211	Any path starting with a letter is a perl library file. For example,
		1212	F<Coro/AIO.pm> corresponds to the file loaded by C<use Coro::AIO>, and
		1213	F<Coro/jit.pl> corresponds to C<require "Coro/jit.pl">.
		1214
		1215	Obviously, module names shouldn't start with any other characters than
		1216	letters :)
		1217
		1218	=back
		1219
		1220	=head3 FUNCTIONS
		1221
		1222	=over 4
		1223
		1224	=item $file = static::find $path
		1225
		1226	Returns the data associated with the given C<$path>
		1227	(e.g. C<Digest/MD5.pm>, C<auto/POSIX/autosplit.ix>).
		1228
		1229	Returns C<undef> if the file isn't embedded.
		1230
		1231	=item @paths = static::list
		1232
		1233	Returns the list of all paths embedded in this binary.
		1234
		1235	=back
		1236
		1237	=head2 EXTRA FEATURES
		1238
		1239	In addition, for the embedded loading of perl files to work, F<staticperl>
		1240	overrides the C<@INC> array.
		1241
		1242	=head1 FULLY STATIC BINARIES - ALPINE LINUX
		1243
		1244	This section once contained a way to build fully static (including
		1245	uClibc) binaries with buildroot. Unfortunately, buildroot no longer
		1246	supports a compiler, so I recommend using alpine linux instead
		1247	(L<http://alpinelinux.org/>). Get yourself a VM (e.g. with qemu), run an
		1248	older alpine linux verison in it (e.g. 2.4), copy staticperl inside and
		1249	use it.
		1250
		1251	The reason you might want an older alpine linux is that uClibc can be
		1252	quite dependent on kernel versions, so the newest version of alpine linux
		1253	might need a newer kernel then you might want for, if you plan to run your
		1254	binaries on on other kernels.
		1255
		1256	=head1 RECIPES / SPECIFIC MODULES
		1257
		1258	This section contains some common(?) recipes and information about
		1259	problems with some common modules or perl constructs that require extra
		1260	files to be included.
		1261
		1262	=head2 MODULES
		1263
		1264	=over 4
		1265
		1266	=item utf8
		1267
		1268	Some functionality in the utf8 module, such as swash handling (used
		1269	for unicode character ranges in regexes) is implemented in the
		1270	C<"utf8_heavy.pl"> library:
		1271
		1272	-Mutf8_heavy.pl
		1273
		1274	Many Unicode properties in turn are defined in separate modules,
		1275	such as C<"unicore/Heavy.pl"> and more specific data tables such as
		1276	C<"unicore/To/Digit.pl"> or C<"unicore/lib/Perl/Word.pl">. These tables
		1277	are big (7MB uncompressed, although F<staticperl> contains special
		1278	handling for those files), so including them on demand by your application
		1279	only might pay off.
		1280
		1281	To simply include the whole unicode database, use:
		1282
		1283	--incglob '/unicore/**.pl'
		1284
		1285	=item AnyEvent
		1286
		1287	AnyEvent needs a backend implementation that it will load in a delayed
		1288	fashion. The L<AnyEvent::Impl::Perl> backend is the default choice
		1289	for AnyEvent if it can't find anything else, and is usually a safe
		1290	fallback. If you plan to use e.g. L<EV> (L<POE>...), then you need to
		1291	include the L<AnyEvent::Impl::EV> (L<AnyEvent::Impl::POE>...) backend as
		1292	well.
		1293
		1294	If you want to handle IRIs or IDNs (L<AnyEvent::Util> punycode and idn
		1295	functions), you also need to include C<"AnyEvent/Util/idna.pl"> and
		1296	C<"AnyEvent/Util/uts46data.pl">.
		1297
		1298	Or you can use C<--usepacklists> and specify C<-MAnyEvent> to include
		1299	everything.
		1300
		1301	=item Cairo
		1302
		1303	See Glib, same problem, same solution.
		1304
		1305	=item Carp
		1306
		1307	Carp had (in older versions of perl) a dependency on L<Carp::Heavy>. As of
		1308	perl 5.12.2 (maybe earlier), this dependency no longer exists.
		1309
		1310	=item Config
		1311
		1312	The F<perl -V> switch (as well as many modules) needs L<Config>, which in
		1313	turn might need L<"Config_heavy.pl">. Including the latter gives you
		1314	both.
		1315
		1316	=item Glib
		1317
		1318	Glib literally requires Glib to be installed already to build - it tries
		1319	to fake this by running Glib out of the build directory before being
		1320	built. F<staticperl> tries to work around this by forcing C<MAN1PODS> and
		1321	C<MAN3PODS> to be empty via the C<PERL_MM_OPT> environment variable.
		1322
		1323	=item Gtk2
		1324
		1325	See Pango, same problems, same solution.
		1326
		1327	=item Net::SSLeay
		1328
		1329	This module hasn't been significantly updated since OpenSSL is called
		1330	OpenSSL, and fails to properly link against dependent libraries, most
		1331	commonly, it forgets to specify -ldl when linking.
		1332
		1333	On GNU/Linux systems this usually goes undetected, as perl usually links
		1334	against -ldl itself and OpenSSL just happens to pick it up that way, by
		1335	chance.
		1336
		1337	For static builds, you either have to configure -ldl manually, or you
		1338	cna use the following snippet in your C<postinstall> hook which patches
		1339	Net::SSLeay after installation, which happens to work most of the time:
		1340
		1341	postinstall() {
		1342	# first install it
		1343	instcpan Net::SSLeay
		1344	# then add -ldl for future linking
		1345	chmod u+w "$PERL_PREFIX"/lib/auto/Net/SSLeay/extralibs.ld
		1346	echo " -ldl" >>"$PERL_PREFIX"/lib/auto/Net/SSLeay/extralibs.ld
		1347	}
		1348
		1349	=item Pango
		1350
		1351	In addition to the C<MAN3PODS> problem in Glib, Pango also routes around
		1352	L<ExtUtils::MakeMaker> by compiling its files on its own. F<staticperl>
		1353	tries to patch L<ExtUtils::MM_Unix> to route around Pango.
		1354
		1355	=item Term::ReadLine::Perl
		1356
		1357	Also needs L<Term::ReadLine::readline>, or C<--usepacklists>.
		1358
		1359	=item URI
		1360
		1361	URI implements schemes as separate modules - the generic URL scheme is
		1362	implemented in L<URI::_generic>, HTTP is implemented in L<URI::http>. If
		1363	you need to use any of these schemes, you should include these manually,
		1364	or use C<--usepacklists>.
		1365
		1366	=back
		1367
		1368	=head2 RECIPES
		1369
		1370	=over 4
		1371
		1372	=item Just link everything in
		1373
		1374	To link just about everything installed in the perl library into a new
		1375	perl, try this (the first time this runs it will take a long time, as a
		1376	lot of files need to be parsed):
		1377
		1378	staticperl mkperl -v --strip ppi --incglob '*'
		1379
		1380	If you don't mind the extra megabytes, this can be a very effective way of
		1381	creating bundles without having to worry about forgetting any modules.
		1382
		1383	You get even more useful variants of this method by first selecting
		1384	everything, and then excluding stuff you are reasonable sure not to need -
		1385	L<bigperl|http://staticperl.schmorp.de/bigperl.html> uses this approach.
		1386
		1387	=item Getting rid of netdb functions
		1388
		1389	The perl core has lots of netdb functions (C<getnetbyname>, C<getgrent>
		1390	and so on) that few applications use. You can avoid compiling them in by
		1391	putting the following fragment into a C<preconfigure> hook:
		1392
		1393	preconfigure() {
		1394	for sym in \
		1395	d_getgrnam_r d_endgrent d_endgrent_r d_endhent \
		1396	d_endhostent_r d_endnent d_endnetent_r d_endpent \
		1397	d_endprotoent_r d_endpwent d_endpwent_r d_endsent \
		1398	d_endservent_r d_getgrent d_getgrent_r d_getgrgid_r \
		1399	d_getgrnam_r d_gethbyaddr d_gethent d_getsbyport \
		1400	d_gethostbyaddr_r d_gethostbyname_r d_gethostent_r \
		1401	d_getlogin_r d_getnbyaddr d_getnbyname d_getnent \
		1402	d_getnetbyaddr_r d_getnetbyname_r d_getnetent_r \
		1403	d_getpent d_getpbyname d_getpbynumber d_getprotobyname_r \
		1404	d_getprotobynumber_r d_getprotoent_r d_getpwent \
		1405	d_getpwent_r d_getpwnam_r d_getpwuid_r d_getsent \
		1406	d_getservbyname_r d_getservbyport_r d_getservent_r \
		1407	d_getspnam_r d_getsbyname
		1408	# d_gethbyname
		1409	do
		1410	PERL_CONFIGURE="$PERL_CONFIGURE -U$sym"
		1411	done
		1412	}
		1413
		1414	This mostly gains space when linking statically, as the functions will
		1415	likely not be linked in. The gain for dynamically-linked binaries is
		1416	smaller.
		1417
		1418	Also, this leaves C<gethostbyname> in - not only is it actually used
		1419	often, the L<Socket> module also exposes it, so leaving it out usually
		1420	gains little. Why Socket exposes a C function that is in the core already
		1421	is anybody's guess.
		1422
		1423	=back
		1424
		1425	=head1 ADDITIONAL RESOURCES
		1426
		1427	Some guy has made a repository on github
		1428	(L<https://github.com/gh0stwizard/staticperl-modules>) with some modules
		1429	patched to build with staticperl.
		1430
548	=head1 AUTHOR	1431	=head1 AUTHOR
549		1432
550	Marc Lehmann <schmorp@schmorp.de>	1433	Marc Lehmann <schmorp@schmorp.de>
551	http://software.schmorp.de/pkg/staticperl.html	1434	http://software.schmorp.de/pkg/staticperl.html
		1435

Diff Legend

–	Removed lines
+	Added lines
<	Changed lines
>	Changed lines