[ViewVC] Diff of: cvs/App-Staticperl/staticperl.pod

Comparing App-Staticperl/staticperl.pod (file contents):
Revision 1.16 by root, Wed Dec 8 23:03:21 2010 UTC vs.
Revision 1.45 by root, Mon Jun 27 21:56:51 2011 UTC

…		…
9	staticperl configure # fetch and then configure perl	9	staticperl configure # fetch and then configure perl
10	staticperl build # configure and then build perl	10	staticperl build # configure and then build perl
11	staticperl install # build and then install perl	11	staticperl install # build and then install perl
12	staticperl clean # clean most intermediate files (restart at configure)	12	staticperl clean # clean most intermediate files (restart at configure)
13	staticperl distclean # delete everything installed by this script	13	staticperl distclean # delete everything installed by this script
		14	staticperl perl ... # invoke the perlinterpreter
14	staticperl cpan # invoke CPAN shell	15	staticperl cpan # invoke CPAN shell
15	staticperl instmod path... # install unpacked modules	16	staticperl instmod path... # install unpacked modules
16	staticperl instcpan modulename... # install modules from CPAN	17	staticperl instcpan modulename... # install modules from CPAN
17	staticperl mkbundle <bundle-args...> # see documentation	18	staticperl mkbundle <bundle-args...> # see documentation
18	staticperl mkperl <bundle-args...> # see documentation	19	staticperl mkperl <bundle-args...> # see documentation
…		…
20		21
21	Typical Examples:	22	Typical Examples:
22		23
23	staticperl install # fetch, configure, build and install perl	24	staticperl install # fetch, configure, build and install perl
24	staticperl cpan # run interactive cpan shell	25	staticperl cpan # run interactive cpan shell
25	staticperl mkperl -M '"Config_heavy.pl"' # build a perl that supports -V	26	staticperl mkperl -MConfig_heavy.pl # build a perl that supports -V
26	staticperl mkperl -MAnyEvent::Impl::Perl -MAnyEvent::HTTPD -MURI -MURI::http	27	staticperl mkperl -MAnyEvent::Impl::Perl -MAnyEvent::HTTPD -MURI -MURI::http
27	# build a perl with the above modules linked in	28	# build a perl with the above modules linked in
28	staticperl mkapp myapp --boot mainprog mymodules	29	staticperl mkapp myapp --boot mainprog mymodules
29	# build a binary "myapp" from mainprog and mymodules	30	# build a binary "myapp" from mainprog and mymodules
30		31
…		…
38	file that contains perl interpreter, libc, all the modules you need, all	39	file that contains perl interpreter, libc, all the modules you need, all
39	the libraries you need and of course your actual program.	40	the libraries you need and of course your actual program.
40		41
41	With F<uClibc> and F<upx> on x86, you can create a single 500kb binary	42	With F<uClibc> and F<upx> on x86, you can create a single 500kb binary
42	that contains perl and 100 modules such as POSIX, AnyEvent, EV, IO::AIO,	43	that contains perl and 100 modules such as POSIX, AnyEvent, EV, IO::AIO,
43	Coro and so on. Or any other choice of modules.	44	Coro and so on. Or any other choice of modules (and some other size :).
		45
		46	To see how this turns out, you can try out smallperl and bigperl, two
		47	pre-built static and compressed perl binaries with many and even more
		48	modules: just follow the links at L<http://staticperl.schmorp.de/>.
44		49
45	The created files do not need write access to the file system (like PAR	50	The created files do not need write access to the file system (like PAR
46	does). In fact, since this script is in many ways similar to PAR::Packer,	51	does). In fact, since this script is in many ways similar to PAR::Packer,
47	here are the differences:	52	here are the differences:
48		53
…		…
67	=item * The generated executables don't need a writable filesystem.	72	=item * The generated executables don't need a writable filesystem.
68		73
69	F<staticperl> loads all required files directly from memory. There is no	74	F<staticperl> loads all required files directly from memory. There is no
70	need to unpack files into a temporary directory.	75	need to unpack files into a temporary directory.
71		76
72	=item * More control over included files.	77	=item * More control over included files, more burden.
73		78
74	PAR tries to be maintenance and hassle-free - it tries to include more	79	PAR tries to be maintenance and hassle-free - it tries to include more
75	files than necessary to make sure everything works out of the box. The	80	files than necessary to make sure everything works out of the box. It
76	extra files (such as the unicode database) can take substantial amounts of	81	mostly succeeds at this, but he extra files (such as the unicode database)
77	memory and file size.	82	can take substantial amounts of memory and file size.
78		83
79	With F<staticperl>, the burden is mostly with the developer - only direct	84	With F<staticperl>, the burden is mostly with the developer - only direct
80	compile-time dependencies and L<AutoLoader> are handled automatically.	85	compile-time dependencies and L<AutoLoader> are handled automatically.
81	This means the modules to include often need to be tweaked manually.	86	This means the modules to include often need to be tweaked manually.
		87
		88	All this does not preclude more permissive modes to be implemented in
		89	the future, but right now, you have to resolve state hidden dependencies
		90	manually.
82		91
83	=item * PAR works out of the box, F<staticperl> does not.	92	=item * PAR works out of the box, F<staticperl> does not.
84		93
85	Maintaining your own custom perl build can be a pain in the ass, and while	94	Maintaining your own custom perl build can be a pain in the ass, and while
86	F<staticperl> tries to make this easy, it still requires a custom perl	95	F<staticperl> tries to make this easy, it still requires a custom perl
…		…
107	Afterwards, you create a list of files and modules you want to include,	116	Afterwards, you create a list of files and modules you want to include,
108	and then either build a new perl binary (that acts just like a normal perl	117	and then either build a new perl binary (that acts just like a normal perl
109	except everything is compiled in), or you create bundle files (basically C	118	except everything is compiled in), or you create bundle files (basically C
110	sources you can use to embed all files into your project).	119	sources you can use to embed all files into your project).
111		120
112	This step is very fast (a few seconds if PPI is not used for stripping,	121	This step is very fast (a few seconds if PPI is not used for stripping, or
113	more seconds otherwise, as PPI is very slow), and can be tweaked and	122	the stripped files are in the cache), and can be tweaked and repeated as
114	repeated as often as necessary.	123	often as necessary.
115		124
116	=head1 THE F<STATICPERL> SCRIPT	125	=head1 THE F<STATICPERL> SCRIPT
117		126
118	This module installs a script called F<staticperl> into your perl	127	This module installs a script called F<staticperl> into your perl
119	binary directory. The script is fully self-contained, and can be used	128	binary directory. The script is fully self-contained, and can be
120	without perl (for example, in an uClibc chroot environment). In fact,	129	used without perl (for example, in an uClibc chroot environment). In
121	it can be extracted from the C<App::Staticperl> distribution tarball as	130	fact, it can be extracted from the C<App::Staticperl> distribution
122	F<bin/staticperl>, without any installation.	131	tarball as F<bin/staticperl>, without any installation. The
		132	newest (possibly alpha) version can also be downloaded from
		133	L<http://staticperl.schmorp.de/staticperl>.
123		134
124	F<staticperl> interprets the first argument as a command to execute,	135	F<staticperl> interprets the first argument as a command to execute,
125	optionally followed by any parameters.	136	optionally followed by any parameters.
126		137
127	There are two command categories: the "phase 1" commands which deal with	138	There are two command categories: the "phase 1" commands which deal with
…		…
129	with creating binaries and bundle files.	140	with creating binaries and bundle files.
130		141
131	=head2 PHASE 1 COMMANDS: INSTALLING PERL	142	=head2 PHASE 1 COMMANDS: INSTALLING PERL
132		143
133	The most important command is F<install>, which does basically	144	The most important command is F<install>, which does basically
134	everything. The default is to download and install perl 5.12.2 and a few	145	everything. The default is to download and install perl 5.12.3 and a few
135	modules required by F<staticperl> itself, but all this can (and should) be	146	modules required by F<staticperl> itself, but all this can (and should) be
136	changed - see L<CONFIGURATION>, below.	147	changed - see L<CONFIGURATION>, below.
137		148
138	The command	149	The command
139		150
140	staticperl install	151	staticperl install
141		152
142	Is normally all you need: It installs the perl interpreter in	153	is normally all you need: It installs the perl interpreter in
143	F<~/.staticperl/perl>. It downloads, configures, builds and installs the	154	F<~/.staticperl/perl>. It downloads, configures, builds and installs the
144	perl interpreter if required.	155	perl interpreter if required.
145		156
146	Most of the following commands simply run one or more steps of this	157	Most of the following F<staticperl> subcommands simply run one or more
147	sequence.	158	steps of this sequence.
		159
		160	If it fails, then most commonly because the compiler options I selected
		161	are not supported by your compiler - either edit the F<staticperl> script
		162	yourself or create F<~/.staticperl> shell script where your set working
		163	C<PERL_CCFLAGS> etc. variables.
148		164
149	To force recompilation or reinstallation, you need to run F<staticperl	165	To force recompilation or reinstallation, you need to run F<staticperl
150	distclean> first.	166	distclean> first.
151		167
152	=over 4	168	=over 4
153		169
		170	=item F<staticperl version>
		171
		172	Prints some info about the version of the F<staticperl> script you are using.
		173
154	=item F<staticperl fetch>	174	=item F<staticperl fetch>
155		175
156	Runs only the download and unpack phase, unless this has already happened.	176	Runs only the download and unpack phase, unless this has already happened.
157		177
158	=item F<staticperl configure>	178	=item F<staticperl configure>
…		…
166		186
167	=item F<staticperl install>	187	=item F<staticperl install>
168		188
169	Wipes the perl installation directory (usually F<~/.staticperl/perl>) and	189	Wipes the perl installation directory (usually F<~/.staticperl/perl>) and
170	installs the perl distribution, potentially after building it first.	190	installs the perl distribution, potentially after building it first.
		191
		192	=item F<staticperl perl> [args...]
		193
		194	Invokes the compiled perl interpreter with the given args. Basically the
		195	same as starting perl directly (usually via F<~/.staticperl/bin/perl>),
		196	but beats typing the path sometimes.
		197
		198	Example: check that the Gtk2 module is installed and loadable.
		199
		200	staticperl perl -MGtk2 -e0
171		201
172	=item F<staticperl cpan> [args...]	202	=item F<staticperl cpan> [args...]
173		203
174	Starts an interactive CPAN shell that you can use to install further	204	Starts an interactive CPAN shell that you can use to install further
175	modules. Installs the perl first if necessary, but apart from that,	205	modules. Installs the perl first if necessary, but apart from that,
…		…
195		225
196	=item F<staticperl clean>	226	=item F<staticperl clean>
197		227
198	Deletes the perl source directory (and potentially cleans up other	228	Deletes the perl source directory (and potentially cleans up other
199	intermediate files). This can be used to clean up files only needed for	229	intermediate files). This can be used to clean up files only needed for
200	building perl, without removing the installed perl interpreter, or to	230	building perl, without removing the installed perl interpreter.
201	force a re-build from scratch.
202		231
203	At the moment, it doesn't delete downloaded tarballs.	232	At the moment, it doesn't delete downloaded tarballs.
		233
		234	The exact semantics of this command will probably change.
204		235
205	=item F<staticperl distclean>	236	=item F<staticperl distclean>
206		237
207	This wipes your complete F<~/.staticperl> directory. Be careful with this,	238	This wipes your complete F<~/.staticperl> directory. Be careful with this,
208	it nukes your perl download, perl sources, perl distribution and any	239	it nukes your perl download, perl sources, perl distribution and any
…		…
232		263
233	# first make sure we have perl and the required modules	264	# first make sure we have perl and the required modules
234	staticperl instcpan AnyEvent::HTTPD	265	staticperl instcpan AnyEvent::HTTPD
235		266
236	# now build the perl	267	# now build the perl
237	staticperl mkperl -M'"Config_heavy.pl"' -MAnyEvent::Impl::Perl \	268	staticperl mkperl -MConfig_heavy.pl -MAnyEvent::Impl::Perl \
238	-MAnyEvent::HTTPD -MURI::http \	269	-MAnyEvent::HTTPD -MURI::http \
239	--add 'eg/httpd httpd.pm'	270	--add 'eg/httpd httpd.pm'
240		271
241	# finally, invoke it	272	# finally, invoke it
242	./perl -Mhttpd	273	./perl -Mhttpd
…		…
258	-MAnyEvent::Impl::Perl -MAnyEvent::HTTPD -MURI::http	289	-MAnyEvent::Impl::Perl -MAnyEvent::HTTPD -MURI::http
259		290
260	# run it	291	# run it
261	./app	292	./app
262		293
		294	Here are the three phase 2 commands:
		295
		296	=over 4
		297
		298	=item F<staticperl mkbundle> args...
		299
		300	The "default" bundle command - it interprets the given bundle options and
		301	writes out F<bundle.h>, F<bundle.c>, F<bundle.ccopts> and F<bundle.ldopts>
		302	files, useful for embedding.
		303
		304	=item F<staticperl mkperl> args...
		305
		306	Creates a bundle just like F<staticperl mkbundle> (in fact, it's the same
		307	as invoking F<staticperl mkbundle --perl> args...), but then compiles and
		308	links a new perl interpreter that embeds the created bundle, then deletes
		309	all intermediate files.
		310
		311	=item F<staticperl mkapp> filename args...
		312
		313	Does the same as F<staticperl mkbundle> (in fact, it's the same as
		314	invoking F<staticperl mkbundle --app> filename args...), but then compiles
		315	and links a new standalone application that simply initialises the perl
		316	interpreter.
		317
		318	The difference to F<staticperl mkperl> is that the standalone application
		319	does not act like a perl interpreter would - in fact, by default it would
		320	just do nothing and exit immediately, so you should specify some code to
		321	be executed via the F<--boot> option.
		322
		323	=back
		324
263	=head3 OPTION PROCESSING	325	=head3 OPTION PROCESSING
264		326
265	All options can be given as arguments on the command line (typically	327	All options can be given as arguments on the command line (typically
266	using long (e.g. C<--verbose>) or short option (e.g. C<-v>) style). Since	328	using long (e.g. C<--verbose>) or short option (e.g. C<-v>) style). Since
267	specifying a lot of modules can make the command line very cumbersome,	329	specifying a lot of options can make the command line very long and
268	you can put all long options into a "bundle specification file" (with or	330	unwieldy, you can put all long options into a "bundle specification file"
269	without C<--> prefix) and specify this bundle file instead.	331	(one option per line, with or without C<--> prefix) and specify this
		332	bundle file instead.
270		333
271	For example, the command given earlier could also look like this:	334	For example, the command given earlier to link a new F<perl> could also
		335	look like this:
272		336
273	staticperl mkperl httpd.bundle	337	staticperl mkperl httpd.bundle
274		338
275	And all options could be in F<httpd.bundle>:	339	With all options stored in the F<httpd.bundle> file (one option per line,
276		340	everything after the option is an argument):
		341
277	use "Config_heavy.pl"	342	use "Config_heavy.pl"
278	use AnyEvent::Impl::Perl	343	use AnyEvent::Impl::Perl
279	use AnyEvent::HTTPD	344	use AnyEvent::HTTPD
280	use URI::http	345	use URI::http
281	add eg/httpd httpd.pm	346	add eg/httpd httpd.pm
282		347
283	All options that specify modules or files to be added are processed in the	348	All options that specify modules or files to be added are processed in the
284	order given on the command line (that affects the C<--use> and C<--eval>	349	order given on the command line.
285	options at the moment).
286		350
287	=head3 MKBUNDLE OPTIONS	351	=head3 BUNDLE CREATION WORKFLOW / STATICPELR MKBUNDLE OPTIONS
288		352
289	=over 4	353	F<staticperl mkbundle> works by first assembling a list of candidate
		354	files and modules to include, then filtering them by include/exclude
		355	patterns. The remaining modules (together with their direct dependencies,
		356	such as link libraries and L<AutoLoader> files) are then converted into
		357	bundle files suitable for embedding. F<staticperl mkbundle> can then
		358	optionally build a new perl interpreter or a standalone application.
290		359
		360	=over 4
		361
		362	=item Step 0: Generic argument processing.
		363
		364	The following options influence F<staticperl mkbundle> itself.
		365
		366	=over 4
		367
291	=item --verbose \| -v	368	=item C<--verbose> \| C<-v>
292		369
293	Increases the verbosity level by one (the default is C<1>).	370	Increases the verbosity level by one (the default is C<1>).
294		371
295	=item --quiet \| -q	372	=item C<--quiet> \| C<-q>
296		373
297	Decreases the verbosity level by one.	374	Decreases the verbosity level by one.
298		375
		376	=item any other argument
		377
		378	Any other argument is interpreted as a bundle specification file, which
		379	supports all options (without extra quoting), one option per line, in the
		380	format C<option> or C<option argument>. They will effectively be expanded
		381	and processed as if they were directly written on the command line, in
		382	place of the file name.
		383
		384	=back
		385
		386	=item Step 1: gather candidate files and modules
		387
		388	In this step, modules, perl libraries (F<.pl> files) and other files are
		389	selected for inclusion in the bundle. The relevant options are executed
		390	in order (this makes a difference mostly for C<--eval>, which can rely on
		391	earlier C<--use> options to have been executed).
		392
		393	=over 4
		394
		395	=item C<--use> F<module> \| C<-M>F<module>
		396
		397	Include the named module or perl library and trace direct
		398	dependencies. This is done by loading the module in a subprocess and
		399	tracing which other modules and files it actually loads.
		400
		401	Example: include AnyEvent and AnyEvent::Impl::Perl.
		402
		403	staticperl mkbundle --use AnyEvent --use AnyEvent::Impl::Perl
		404
		405	Sometimes you want to load old-style "perl libraries" (F<.pl> files), or
		406	maybe other weirdly named files. To support this, the C<--use> option
		407	actually tries to do what you mean, depending on the string you specify:
		408
		409	=over 4
		410
		411	=item a possibly valid module name, e.g. F<common::sense>, F<Carp>,
		412	F<Coro::Mysql>.
		413
		414	If the string contains no quotes, no F</> and no F<.>, then C<--use>
		415	assumes that it is a normal module name. It will create a new package and
		416	evaluate a C<use module> in it, i.e. it will load the package and do a
		417	default import.
		418
		419	The import step is done because many modules trigger more dependencies
		420	when something is imported than without.
		421
		422	=item anything that contains F</> or F<.> characters,
		423	e.g. F<utf8_heavy.pl>, F<Module/private/data.pl>.
		424
		425	The string will be quoted and passed to require, as if you used C<require
		426	$module>. Nothing will be imported.
		427
		428	=item "path" or 'path', e.g. C<"utf8_heavy.pl">.
		429
		430	If you enclose the name into single or double quotes, then the quotes will
		431	be removed and the resulting string will be passed to require. This syntax
		432	is form compatibility with older versions of staticperl and should not be
		433	used anymore.
		434
		435	=back
		436
		437	Example: C<use> AnyEvent::Socket, once using C<use> (importing the
		438	symbols), and once via C<require>, not importing any symbols. The first
		439	form is preferred as many modules load some extra dependencies when asked
		440	to export symbols.
		441
		442	staticperl mkbundle -MAnyEvent::Socket # use + import
		443	staticperl mkbundle -MAnyEvent/Socket.pm # require only
		444
		445	Example: include the required files for F<perl -V> to work in all its
		446	glory (F<Config.pm> is included automatically by the dependency tracker).
		447
		448	# shell command
		449	staticperl mkbundle -MConfig_heavy.pl
		450
		451	# bundle specification file
		452	use Config_heavy.pl
		453
		454	The C<-M>module syntax is included as a convenience that might be easier
		455	to remember than C<--use> - it's the same switch as perl itself uses
		456	to load modules. Or maybe it confuses people. Time will tell. Or maybe
		457	not. Sigh.
		458
		459	=item C<--eval> "perl code" \| C<-e> "perl code"
		460
		461	Sometimes it is easier (or necessary) to specify dependencies using perl
		462	code, or maybe one of the modules you use need a special use statement. In
		463	that case, you can use C<--eval> to execute some perl snippet or set some
		464	variables or whatever you need. All files C<require>'d or C<use>'d while
		465	executing the snippet are included in the final bundle.
		466
		467	Keep in mind that F<mkbundle> will not import any symbols from the modules
		468	named by the C<--use> option, so do not expect the symbols from modules
		469	you C<--use>'d earlier on the command line to be available.
		470
		471	Example: force L<AnyEvent> to detect a backend and therefore include it
		472	in the final bundle.
		473
		474	staticperl mkbundle --eval 'use AnyEvent; AnyEvent::detect'
		475
		476	# or like this
		477	staticperl mkbundle -MAnyEvent --eval 'AnyEvent::detect'
		478
		479	Example: use a separate "bootstrap" script that C<use>'s lots of modules
		480	and also include this in the final bundle, to be executed automatically
		481	when the interpreter is initialised.
		482
		483	staticperl mkbundle --eval 'do "bootstrap"' --boot bootstrap
		484
		485	=item C<--boot> F<filename>
		486
		487	Include the given file in the bundle and arrange for it to be
		488	executed (using C<require>) before the main program when the new perl
		489	is initialised. This can be used to modify C<@INC> or do similar
		490	modifications before the perl interpreter executes scripts given on the
		491	command line (or via C<-e>). This works even in an embedded interpreter -
		492	the file will be executed during interpreter initialisation in that case.
		493
		494	=item C<--incglob> pattern
		495
		496	This goes through all standard library directories and tries to match any
		497	F<.pm> and F<.pl> files against the extended glob pattern (see below). If
		498	a file matches, it is added. The pattern is matched against the full path
		499	of the file (sans the library directory prefix), e.g. F<Sys/Syslog.pm>.
		500
		501	This is very useful to include "everything":
		502
		503	--incglob '*'
		504
		505	It is also useful for including perl libraries, or trees of those, such as
		506	the unicode database files needed by some perl built-ins, the regex engine
		507	and other modules.
		508
		509	--incglob '/unicore/**.pl'
		510
		511	=item C<--add> F<file> \| C<--add> "F<file> alias"
		512
		513	Adds the given (perl) file into the bundle (and optionally call it
		514	"alias"). The F<file> is either an absolute path or a path relative to the
		515	current directory. If an alias is specified, then this is the name it will
		516	use for C<@INC> searches, otherwise the path F<file> will be used as the
		517	internal name.
		518
		519	This switch is used to include extra files into the bundle.
		520
		521	Example: embed the file F<httpd> in the current directory as F<httpd.pm>
		522	when creating the bundle.
		523
		524	staticperl mkperl --add "httpd httpd.pm"
		525
		526	# can be accessed via "use httpd"
		527
		528	Example: add a file F<initcode> from the current directory.
		529
		530	staticperl mkperl --add 'initcode &initcode'
		531
		532	# can be accessed via "do '&initcode'"
		533
		534	Example: add local files as extra modules in the bundle.
		535
		536	# specification file
		537	add file1 myfiles/file1.pm
		538	add file2 myfiles/file2.pm
		539	add file3 myfiles/file3.pl
		540
		541	# then later, in perl, use
		542	use myfiles::file1;
		543	require myfiles::file2;
		544	my $res = do "myfiles/file3.pl";
		545
		546	=item C<--binadd> F<file> \| C<--add> "F<file> alias"
		547
		548	Just like C<--add>, except that it treats the file as binary and adds it
		549	without any postprocessing (perl files might get stripped to reduce their
		550	size).
		551
		552	If you specify an alias you should probably add a C<&> prefix to avoid
		553	clashing with embedded perl files (whose paths never start with C<&>),
		554	and/or use a special directory prefix, such as C<&res/name>.
		555
		556	You can later get a copy of these files by calling C<staticperl::find
		557	"alias">.
		558
		559	An alternative way to embed binary files is to convert them to perl and
		560	use C<do> to get the contents - this method is a bit cumbersome, but works
		561	both inside and outside of a staticperl bundle:
		562
		563	# a "binary" file, call it "bindata.pl"
		564	<<'SOME_MARKER'
		565	binary data NOT containing SOME_MARKER
		566	SOME_MARKER
		567
		568	# load the binary
		569	chomp (my $data = do "bindata.pl");
		570
		571	=back
		572
		573	=item Step 2: filter all files using C<--include> and C<--exclude> options.
		574
		575	After all candidate files and modules are added, they are I<filtered>
		576	by a combination of C<--include> and C<--exclude> patterns (there is an
		577	implicit C<--include *> at the end, so if no filters are specified, all
		578	files are included).
		579
		580	All that this step does is potentially reduce the number of files that are
		581	to be included - no new files are added during this step.
		582
		583	=over 4
		584
		585	=item C<--include> pattern \| C<-i> pattern \| C<--exclude> pattern \| C<-x> pattern
		586
		587	These specify an include or exclude pattern to be applied to the candidate
		588	file list. An include makes sure that the given files will be part of the
		589	resulting file set, an exclude will exclude remaining files. The patterns
		590	are "extended glob patterns" (see below).
		591
		592	The patterns are applied "in order" - files included via earlier
		593	C<--include> specifications cannot be removed by any following
		594	C<--exclude>, and likewise, and file excluded by an earlier C<--exclude>
		595	cannot be added by any following C<--include>.
		596
		597	For example, to include everything except C<Devel> modules, but still
		598	include F<Devel::PPPort>, you could use this:
		599
		600	--incglob '' -i '/Devel/PPPort.pm' -x '/Devel/*'
		601
		602	=back
		603
		604	=item Step 3: add any extra or "hidden" dependencies.
		605
		606	F<staticperl> currently knows about three extra types of depdendencies
		607	that are added automatically. Only one (F<.packlist> files) is currently
		608	optional and can be influenced, the others are always included:
		609
		610	=over 4
		611
		612	=item C<--usepacklists>
		613
		614	Read F<.packlist> files for each distribution that happens to match a
		615	module name you specified. Sounds weird, and it is, so expect semantics to
		616	change somehow in the future.
		617
		618	The idea is that most CPAN distributions have a F<.pm> file that matches
		619	the name of the distribution (which is rather reasonable after all).
		620
		621	If this switch is enabled, then if any of the F<.pm> files that have been
		622	selected match an install distribution, then all F<.pm>, F<.pl>, F<.al>
		623	and F<.ix> files installed by this distribution are also included.
		624
		625	For example, using this switch, when the L<URI> module is specified, then
		626	all L<URI> submodules that have been installed via the CPAN distribution
		627	are included as well, so you don't have to manually specify them.
		628
		629	=item L<AutoLoader> splitfiles
		630
		631	Some modules use L<AutoLoader> - less commonly (hopefully) used functions
		632	are split into separate F<.al> files, and an index (F<.ix>) file contains
		633	the prototypes.
		634
		635	Both F<.ix> and F<.al> files will be detected automatically and added to
		636	the bundle.
		637
		638	=item link libraries (F<.a> files)
		639
		640	Modules using XS (or any other non-perl language extension compiled at
		641	installation time) will have a static archive (typically F<.a>). These
		642	will automatically be added to the linker options in F<bundle.ldopts>.
		643
		644	Should F<staticperl> find a dynamic link library (typically F<.so>) it
		645	will warn about it - obviously this shouldn't happen unless you use
		646	F<staticperl> on the wrong perl, or one (probably wrongly) configured to
		647	use dynamic loading.
		648
		649	=item extra libraries (F<extralibs.ld>)
		650
		651	Some modules need linking against external libraries - these are found in
		652	F<extralibs.ld> and added to F<bundle.ldopts>.
		653
		654	=back
		655
		656	=item Step 4: write bundle files and optionally link a program
		657
		658	At this point, the select files will be read, processed (stripped) and
		659	finally the bundle files get written to disk, and F<staticperl mkbundle>
		660	is normally finished. Optionally, it can go a step further and either link
		661	a new F<perl> binary with all selected modules and files inside, or build
		662	a standalone application.
		663
		664	Both the contents of the bundle files and any extra linking is controlled
		665	by these options:
		666
		667	=over 4
		668
299	=item --strip none\|pod\|ppi	669	=item C<--strip> C<none>\|C<pod>\|C<ppi>
300		670
301	Specify the stripping method applied to reduce the file of the perl	671	Specify the stripping method applied to reduce the file of the perl
302	sources included.	672	sources included.
303		673
304	The default is C<pod>, which uses the L<Pod::Strip> module to remove all	674	The default is C<pod>, which uses the L<Pod::Strip> module to remove all
305	pod documentation, which is very fast and reduces file size a lot.	675	pod documentation, which is very fast and reduces file size a lot.
306		676
307	The C<ppi> method uses L<PPI> to parse and condense the perl sources. This	677	The C<ppi> method uses L<PPI> to parse and condense the perl sources. This
308	saves a lot more than just L<Pod::Strip>, and is generally safer, but	678	saves a lot more than just L<Pod::Strip>, and is generally safer,
309	is also a lot slower, so is best used for production builds. Note that	679	but is also a lot slower (some files take almost a minute to strip -
310	this method doesn't optimise for raw file size, but for best compression	680	F<staticperl> maintains a cache of stripped files to speed up subsequent
311	(that means that the uncompressed file size is a bit larger, but the files	681	runs for this reason). Note that this method doesn't optimise for raw file
312	compress better, e.g. with F<upx>).	682	size, but for best compression (that means that the uncompressed file size
		683	is a bit larger, but the files compress better, e.g. with F<upx>).
313		684
314	Last not least, if you need accurate line numbers in error messages,	685	Last not least, if you need accurate line numbers in error messages,
315	or in the unlikely case where C<pod> is too slow, or some module gets	686	or in the unlikely case where C<pod> is too slow, or some module gets
316	mistreated, you can specify C<none> to not mangle included perl sources in	687	mistreated, you can specify C<none> to not mangle included perl sources in
317	any way.	688	any way.
318		689
319	=item --perl	690	=item C<--perl>
320		691
321	After writing out the bundle files, try to link a new perl interpreter. It	692	After writing out the bundle files, try to link a new perl interpreter. It
322	will be called F<perl> and will be left in the current working	693	will be called F<perl> and will be left in the current working
323	directory. The bundle files will be removed.	694	directory. The bundle files will be removed.
324		695
325	This switch is automatically used when F<staticperl> is invoked with the	696	This switch is automatically used when F<staticperl> is invoked with the
326	C<mkperl> command (instead of C<mkbundle>):	697	C<mkperl> command instead of C<mkbundle>.
327		698
328	# build a new ./perl with only common::sense in it - very small :)	699	Example: build a new F<./perl> binary with only L<common::sense> inside -
		700	it will be even smaller than the standard perl interpreter as none of the
		701	modules of the base distribution (such as L<Fcntl>) will be included.
		702
329	staticperl mkperl -Mcommon::sense	703	staticperl mkperl -Mcommon::sense
330		704
331	=item --app name	705	=item C<--app> F<name>
332		706
333	After writing out the bundle files, try to link a new standalone	707	After writing out the bundle files, try to link a new standalone
334	program. It will be called C<name>, and the bundle files get removed after	708	program. It will be called C<name>, and the bundle files get removed after
335	linking it.	709	linking it.
		710
		711	This switch is automatically used when F<staticperl> is invoked with the
		712	C<mkapp> command instead of C<mkbundle>.
336		713
337	The difference to the (mutually exclusive) C<--perl> option is that the	714	The difference to the (mutually exclusive) C<--perl> option is that the
338	binary created by this option will not try to act as a perl interpreter -	715	binary created by this option will not try to act as a perl interpreter -
339	instead it will simply initialise the perl interpreter, clean it up and	716	instead it will simply initialise the perl interpreter, clean it up and
340	exit.	717	exit.
341		718
342	This switch is automatically used when F<staticperl> is invoked with the	719	This means that, by default, it will do nothing but burn a few CPU cycles
343	C<mkapp> command (instead of C<mkbundle>):
344
345	To let it do something useful you I<must> add some boot code, e.g. with	720	- for it to do something useful you I<must> add some boot code, e.g. with
346	the C<--boot> option.	721	the C<--boot> option.
347		722
348	Example: create a standalone perl binary that will execute F<appfile> when	723	Example: create a standalone perl binary called F<./myexe> that will
349	it is started.	724	execute F<appfile> when it is started.
350		725
351	staticperl mkbundle --app myexe --boot appfile	726	staticperl mkbundle --app myexe --boot appfile
352		727
353	=item --use module \| -Mmodule	728	=item C<--ignore-env>
354		729
355	Include the named module and all direct dependencies. This is done by	730	Generates extra code to unset some environment variables before
356	C<require>'ing the module in a subprocess and tracing which other modules	731	initialising/running perl. Perl supports a lot of environment variables
357	and files it actually loads. If the module uses L<AutoLoader>, then all	732	that might alter execution in ways that might be undesirablre for
358	splitfiles will be included as well.	733	standalone applications, and this option removes those known to cause
		734	trouble.
359		735
360	Example: include AnyEvent and AnyEvent::Impl::Perl.	736	Specifically, these are removed:
361		737
362	staticperl mkbundle --use AnyEvent --use AnyEvent::Impl::Perl	738	C<PERL_HASH_SEED_DEBUG> and C<PERL_DEBUG_MSTATS> can cause underaible
		739	output, C<PERL5OPT>, C<PERL_DESTRUCT_LEVEL>, C<PERL_HASH_SEED> and
		740	C<PERL_SIGNALS> can alter execution significantly, and C<PERL_UNICODE>,
		741	C<PERLIO_DEBUG> and C<PERLIO> can affect input and output.
363		742
364	Sometimes you want to load old-style "perl libraries" (F<.pl> files), or	743	The variables C<PERL_LIB> and C<PERL5_LIB> are always ignored because the
365	maybe other weirdly named files. To do that, you need to quote the name in	744	startup code used by F<staticperl> overrides C<@INC> in all cases.
366	single or double quotes. When given on the command line, you probably need
367	to quote once more to avoid your shell interpreting it. Common cases that
368	need this are F<Config_heavy.pl> and F<utf8_heavy.pl>.
369		745
370	Example: include the required files for F<perl -V> to work in all its	746	This option will not make your program more secure (unless you are
371	glory (F<Config.pm> is included automatically by this).	747	running with elevated privileges), but it will reduce the surprise effect
		748	when a user has these environment variables set and doesn't expect your
		749	standalone program to act like a perl interpreter.
372		750
373	# bourne shell
374	staticperl mkbundle --use '"Config_heavy.pl"'
375
376	# bundle specification file
377	use "Config_heavy.pl"
378
379	The C<-Mmodule> syntax is included as an alias that might be easier to
380	remember than C<use>. Or maybe it confuses people. Time will tell. Or
381	maybe not. Argh.
382
383	=item --eval "perl code" \| -e "perl code"
384
385	Sometimes it is easier (or necessary) to specify dependencies using perl
386	code, or maybe one of the modules you use need a special use statement. In
387	that case, you can use C<eval> to execute some perl snippet or set some
388	variables or whatever you need. All files C<require>'d or C<use>'d in the
389	script are included in the final bundle.
390
391	Keep in mind that F<mkbundle> will only C<require> the modules named
392	by the C<--use> option, so do not expect the symbols from modules you
393	C<--use>'d earlier on the command line to be available.
394
395	Example: force L<AnyEvent> to detect a backend and therefore include it
396	in the final bundle.
397
398	staticperl mkbundle --eval 'use AnyEvent; AnyEvent::detect'
399
400	# or like this
401	staticperl mkbundle -MAnyEvent --eval 'use AnyEvent; AnyEvent::detect'
402
403	Example: use a separate "bootstrap" script that C<use>'s lots of modules
404	and include this in the final bundle, to be executed automatically.
405
406	staticperl mkbundle --eval 'do "bootstrap"' --boot bootstrap
407
408	=item --boot filename
409
410	Include the given file in the bundle and arrange for it to be executed
411	(using a C<require>) before anything else when the new perl is
412	initialised. This can be used to modify C<@INC> or anything else before
413	the perl interpreter executes scripts given on the command line (or via
414	C<-e>). This works even in an embedded interpreter.
415
416	=item --add "file" \| --add "file alias"
417
418	Adds the given (perl) file into the bundle (and optionally call it
419	"alias"). This is useful to include any custom files into the bundle.
420
421	Example: embed the file F<httpd> as F<httpd.pm> when creating the bundle.
422
423	staticperl mkperl --add "httpd httpd.pm"
424
425	It is also a great way to add any custom modules:
426
427	# specification file
428	add file1 myfiles/file1
429	add file2 myfiles/file2
430	add file3 myfiles/file3
431
432	=item --binadd "file" \| --add "file alias"
433
434	Just like C<--add>, except that it treats the file as binary and adds it
435	without any processing.
436
437	You should probably add a C</> prefix to avoid clashing with embedded
438	perl files (whose paths do not start with C</>), and/or use a special
439	directory, such as C</res/name>.
440
441	You can later get a copy of these files by calling C<staticperl::find
442	"alias">.
443
444	=item --static	751	=item C<--static>
445		752
446	When C<--perl> is also given, link statically instead of dynamically. The	753	Add C<-static> to F<bundle.ldopts>, which means a fully static (if
		754	supported by the OS) executable will be created. This is not immensely
		755	useful when just creating the bundle files, but is most useful when
		756	linking a binary with the C<--perl> or C<--app> options.
		757
447	default is to link the new perl interpreter fully dynamic (that means all	758	The default is to link the new binary dynamically (that means all perl
448	perl modules are linked statically, but all external libraries are still	759	modules are linked statically, but all external libraries are still
449	referenced dynamically).	760	referenced dynamically).
450		761
451	Keep in mind that Solaris doesn't support static linking at all, and	762	Keep in mind that Solaris doesn't support static linking at all, and
452	systems based on GNU libc don't really support it in a usable fashion	763	systems based on GNU libc don't really support it in a very usable
453	either. Try uClibc if you want to create fully statically linked	764	fashion either. Try uClibc if you want to create fully statically linked
454	executables, or try the C<--staticlibs> option to link only some libraries	765	executables, or try the C<--staticlib> option to link only some libraries
455	statically.	766	statically.
456		767
457	=item any other argument	768	=item C<--staticlib> libname
458		769
459	Any other argument is interpreted as a bundle specification file, which	770	When not linking fully statically, this option allows you to link specific
460	supports most long options (without extra quoting), one option per line.	771	libraries statically. What it does is simply replace all occurrences of
		772	C<-llibname> with the GCC-specific C<-Wl,-Bstatic -llibname -Wl,-Bdynamic>
		773	option.
		774
		775	This will have no effect unless the library is actually linked against,
		776	specifically, C<--staticlib> will not link against the named library
		777	unless it would be linked against anyway.
		778
		779	Example: link libcrypt statically into the final binary.
		780
		781	staticperl mkperl -MIO::AIO --staticlib crypt
		782
		783	# ldopts might now contain:
		784	# -lm -Wl,-Bstatic -lcrypt -Wl,-Bdynamic -lpthread
		785
		786	=back
		787
		788	=back
		789
		790	=head3 EXTENDED GLOB PATTERNS
		791
		792	Some options of F<staticperl mkbundle> expect an I<extended glob
		793	pattern>. This is neither a normal shell glob nor a regex, but something
		794	in between. The idea has been copied from rsync, and there are the current
		795	matching rules:
		796
		797	=over 4
		798
		799	=item Patterns starting with F</> will be a anchored at the root of the library tree.
		800
		801	That is, F</unicore> will match the F<unicore> directory in C<@INC>, but
		802	nothing inside, and neither any other file or directory called F<unicore>
		803	anywhere else in the hierarchy.
		804
		805	=item Patterns not starting with F</> will be anchored at the end of the path.
		806
		807	That is, F<idna.pl> will match any file called F<idna.pl> anywhere in the
		808	hierarchy, but not any directories of the same name.
		809
		810	=item A F<*> matches anything within a single path component.
		811
		812	That is, F</unicore/*.pl> would match all F<.pl> files directly inside
		813	C</unicore>, not any deeper level F<.pl> files. Or in other words, F<*>
		814	will not match slashes.
		815
		816	=item A F<**> matches anything.
		817
		818	That is, F</unicore/**.pl> would match all F<.pl> files under F</unicore>,
		819	no matter how deeply nested they are inside subdirectories.
		820
		821	=item A F<?> matches a single character within a component.
		822
		823	That is, F</Encode/??.pm> matches F</Encode/JP.pm>, but not the
		824	hypothetical F</Encode/J/.pm>, as F<?> does not match F</>.
461		825
462	=back	826	=back
463		827
464	=head2 F<STATICPERL> CONFIGURATION AND HOOKS	828	=head2 F<STATICPERL> CONFIGURATION AND HOOKS
465		829
466	During (each) startup, F<staticperl> tries to source the following shell	830	During (each) startup, F<staticperl> tries to source some shell files to
		831	allow you to fine-tune/override configuration settings.
		832
		833	In them you can override shell variables, or define shell functions
		834	("hooks") to be called at specific phases during installation. For
		835	example, you could define a C<postinstall> hook to install additional
		836	modules from CPAN each time you start from scratch.
		837
		838	If the env variable C<$STATICPERLRC> is set, then F<staticperl> will try
		839	to source the file named with it only. Otherwise, it tries the following
467	files in order:	840	shell files in order:
468		841
469	/etc/staticperlrc	842	/etc/staticperlrc
470	~/.staticperlrc	843	~/.staticperlrc
471	$STATICPERL/rc	844	$STATICPERL/rc
472		845
473	They can be used to override shell variables, or define functions to be
474	called at specific phases.
475
476	Note that the last file is erased during F<staticperl distclean>, so	846	Note that the last file is erased during F<staticperl distclean>, so
477	generally should not be used.	847	generally should not be used.
478		848
479	=head3 CONFIGURATION VARIABLES	849	=head3 CONFIGURATION VARIABLES
480		850
…		…
512	=item C<STATICPERL>	882	=item C<STATICPERL>
513		883
514	The directory where staticperl stores all its files	884	The directory where staticperl stores all its files
515	(default: F<~/.staticperl>).	885	(default: F<~/.staticperl>).
516		886
		887	=item C<DLCACHE>
		888
		889	The path to a directory (will be created if it doesn't exist) where
		890	downloaded perl sources are being cached, to avoid downloading them
		891	again. The default is empty, which means there is no cache.
		892
		893	=item C<PERL_VERSION>
		894
		895	The perl version to install - default is currently C<5.12.3>, but C<5.8.9>
		896	is also a good choice (5.8.9 is much smaller than 5.12.3, while 5.10.1 is
		897	about as big as 5.12.3).
		898
517	=item C<PERL_MM_USE_DEFAULT>, C<EV_EXTRA_DEFS>, ...	899	=item C<PERL_MM_USE_DEFAULT>, C<EV_EXTRA_DEFS>, ...
518		900
519	Usually set to C<1> to make modules "less inquisitive" during their	901	Usually set to C<1> to make modules "less inquisitive" during their
520	installation, you can set any environment variable you want - some modules	902	installation. You can set (and export!) any environment variable you want
521	(such as L<Coro> or L<EV>) use environment variables for further tweaking.	903	- some modules (such as L<Coro> or L<EV>) use environment variables for
522		904	further tweaking.
523	=item C<PERL_VERSION>
524
525	The perl version to install - default is currently C<5.12.2>, but C<5.8.9>
526	is also a good choice (5.8.9 is much smaller than 5.12.2, while 5.10.1 is
527	about as big as 5.12.2).
528		905
529	=item C<PERL_PREFIX>	906	=item C<PERL_PREFIX>
530		907
531	The prefix where perl gets installed (default: F<$STATICPERL/perl>),	908	The prefix where perl gets installed (default: F<$STATICPERL/perl>),
532	i.e. where the F<bin> and F<lib> subdirectories will end up.	909	i.e. where the F<bin> and F<lib> subdirectories will end up.
…		…
541		918
542	More commonly, you would either activate 64 bit integer support	919	More commonly, you would either activate 64 bit integer support
543	(C<-Duse64bitint>), or disable large files support (-Uuselargefiles), to	920	(C<-Duse64bitint>), or disable large files support (-Uuselargefiles), to
544	reduce filesize further.	921	reduce filesize further.
545		922
546	=item C<PERL_CPPFLAGS>, C<PERL_OPTIMIZE>, C<PERL_LDFLAGS>, C<PERL_LIBS>	923	=item C<PERL_CC>, C<PERL_CCFLAGS>, C<PERL_OPTIMIZE>, C<PERL_LDFLAGS>, C<PERL_LIBS>
547		924
548	These flags are passed to perl's F<Configure> script, and are generally	925	These flags are passed to perl's F<Configure> script, and are generally
549	optimised for small size (at the cost of performance). Since they also	926	optimised for small size (at the cost of performance). Since they also
550	contain subtle workarounds around various build issues, changing these	927	contain subtle workarounds around various build issues, changing these
551	usually requires understanding their default values - best look at the top	928	usually requires understanding their default values - best look at
552	of the F<staticperl> script for more info on these.	929	the top of the F<staticperl> script for more info on these, and use a
		930	F<~/.staticperlrc> to override them.
		931
		932	Most of the variables override (or modify) the corresponding F<Configure>
		933	variable, except C<PERL_CCFLAGS>, which gets appended.
		934
		935	You should have a look near the beginning of the F<staticperl> script -
		936	staticperl tries to default C<PERL_OPTIMIZE> to some psace-saving options
		937	suitable for newer gcc versions. For other compilers or older versions you
		938	need to adjust these, for example, in your F<~/.staticperlrc>.
553		939
554	=back	940	=back
555		941
556	=head4 Variables you probably I<do not want> to override	942	=head4 Variables you probably I<do not want> to override
557		943
558	=over 4	944	=over 4
		945
		946	=item C<MAKE>
		947
		948	The make command to use - default is C<make>.
559		949
560	=item C<MKBUNDLE>	950	=item C<MKBUNDLE>
561		951
562	Where F<staticperl> writes the C<mkbundle> command to	952	Where F<staticperl> writes the C<mkbundle> command to
563	(default: F<$STATICPERL/mkbundle>).	953	(default: F<$STATICPERL/mkbundle>).
…		…
572	=head3 OVERRIDABLE HOOKS	962	=head3 OVERRIDABLE HOOKS
573		963
574	In addition to environment variables, it is possible to provide some	964	In addition to environment variables, it is possible to provide some
575	shell functions that are called at specific times. To provide your own	965	shell functions that are called at specific times. To provide your own
576	commands, just define the corresponding function.	966	commands, just define the corresponding function.
		967
		968	The actual order in which hooks are invoked during a full install
		969	from scratch is C<preconfigure>, C<patchconfig>, C<postconfigure>,
		970	C<postbuild>, C<postinstall>.
577		971
578	Example: install extra modules from CPAN and from some directories	972	Example: install extra modules from CPAN and from some directories
579	at F<staticperl install> time.	973	at F<staticperl install> time.
580		974
581	postinstall() {	975	postinstall() {
…		…
588		982
589	=over 4	983	=over 4
590		984
591	=item preconfigure	985	=item preconfigure
592		986
593	Called just before running F<./Configur> in the perl source	987	Called just before running F<./Configure> in the perl source
594	directory. Current working directory is the perl source directory.	988	directory. Current working directory is the perl source directory.
595		989
596	This can be used to set any C<PERL_xxx> variables, which might be costly	990	This can be used to set any C<PERL_xxx> variables, which might be costly
597	to compute.	991	to compute.
598		992
		993	=item patchconfig
		994
		995	Called after running F<./Configure> in the perl source directory to create
		996	F<./config.sh>, but before running F<./Configure -S> to actually apply the
		997	config. Current working directory is the perl source directory.
		998
		999	Can be used to tailor/patch F<config.sh> or do any other modifications.
		1000
599	=item postconfigure	1001	=item postconfigure
600		1002
601	Called after configuring, but before building perl. Current working	1003	Called after configuring, but before building perl. Current working
602	directory is the perl source directory.	1004	directory is the perl source directory.
603
604	Could be used to tailor/patch config.sh (followed by F<sh Configure -S>)
605	or do any other modifications.
606		1005
607	=item postbuild	1006	=item postbuild
608		1007
609	Called after building, but before installing perl. Current working	1008	Called after building, but before installing perl. Current working
610	directory is the perl source directory.	1009	directory is the perl source directory.
…		…
648	A header file that contains the prototypes of the few symbols "exported"	1047	A header file that contains the prototypes of the few symbols "exported"
649	by bundle.c, and also exposes the perl headers to the application.	1048	by bundle.c, and also exposes the perl headers to the application.
650		1049
651	=over 4	1050	=over 4
652		1051
653	=item staticperl_init ()	1052	=item staticperl_init (xs_init = 0)
654		1053
655	Initialises the perl interpreter. You can use the normal perl functions	1054	Initialises the perl interpreter. You can use the normal perl functions
656	after calling this function, for example, to define extra functions or	1055	after calling this function, for example, to define extra functions or
657	to load a .pm file that contains some initialisation code, or the main	1056	to load a .pm file that contains some initialisation code, or the main
658	program function:	1057	program function:
…		…
665	}	1064	}
666		1065
667	static void	1066	static void
668	run_myapp(void)	1067	run_myapp(void)
669	{	1068	{
670	staticperl_init ();	1069	staticperl_init (0);
671	newXSproto ("myapp::xsfunction", xsfunction, __FILE__, "$$;$");	1070	newXSproto ("myapp::xsfunction", xsfunction, __FILE__, "$$;$");
672	eval_pv ("require myapp::main", 1); // executes "myapp/main.pm"	1071	eval_pv ("require myapp::main", 1); // executes "myapp/main.pm"
673	}	1072	}
674		1073
		1074	When your bootcode already wants to access some XS functions at
		1075	compiletime, then you need to supply an C<xs_init> function pointer that
		1076	is called as soon as perl is initialised enough to define XS functions,
		1077	but before the preamble code is executed:
		1078
		1079	static void
		1080	xs_init (pTHX)
		1081	{
		1082	newXSproto ("myapp::xsfunction", xsfunction, __FILE__, "$$;$");
		1083	}
		1084
		1085	static void
		1086	run_myapp(void)
		1087	{
		1088	staticperl_init (xs_init);
		1089	}
		1090
		1091	=item staticperl_cleanup ()
		1092
		1093	In the unlikely case that you want to destroy the perl interpreter, here
		1094	is the corresponding function.
		1095
675	=item staticperl_xs_init (pTHX)	1096	=item staticperl_xs_init (pTHX)
676		1097
677	Sometimes you need direct control over C<perl_parse> and C<perl_run>, in	1098	Sometimes you need direct control over C<perl_parse> and C<perl_run>, in
678	which case you do not want to use C<staticperl_init> but call them on your	1099	which case you do not want to use C<staticperl_init> but call them on your
679	own.	1100	own.
680		1101
681	Then you need this function - either pass it directly as the C<xs_init>	1102	Then you need this function - either pass it directly as the C<xs_init>
682	function to C<perl_parse>, or call it from your own C<xs_init> function.	1103	function to C<perl_parse>, or call it as one of the first things from your
683		1104	own C<xs_init> function.
684	=item staticperl_cleanup ()
685
686	In the unlikely case that you want to destroy the perl interpreter, here
687	is the corresponding function.
688		1105
689	=item PerlInterpreter *staticperl	1106	=item PerlInterpreter *staticperl
690		1107
691	The perl interpreter pointer used by staticperl. Not normally so useful,	1108	The perl interpreter pointer used by staticperl. Not normally so useful,
692	but there it is.	1109	but there it is.
…		…
728		1145
729	Returns the list of all paths embedded in this binary.	1146	Returns the list of all paths embedded in this binary.
730		1147
731	=back	1148	=back
732		1149
733	=head1 FULLY STATIC BINARIES - BUILDROOT	1150	=head1 FULLY STATIC BINARIES - UCLIBC AND BUILDROOT
734		1151
735	To make truly static (Linux-) libraries, you might want to have a look at	1152	To make truly static (Linux-) libraries, you might want to have a look at
736	buildroot (L<http://buildroot.uclibc.org/>).	1153	buildroot (L<http://buildroot.uclibc.org/>).
737		1154
738	Buildroot is primarily meant to set up a cross-compile environment (which	1155	Buildroot is primarily meant to set up a cross-compile environment (which
…		…
745	good experiences with GCC 4.4.x but not GCC 4.5.	1162	good experiences with GCC 4.4.x but not GCC 4.5.
746		1163
747	To minimise code size, I used C<-pipe -ffunction-sections -fdata-sections	1164	To minimise code size, I used C<-pipe -ffunction-sections -fdata-sections
748	-finline-limit=8 -fno-builtin-strlen -mtune=i386>. The C<-mtune=i386>	1165	-finline-limit=8 -fno-builtin-strlen -mtune=i386>. The C<-mtune=i386>
749	doesn't decrease codesize much, but it makes the file much more	1166	doesn't decrease codesize much, but it makes the file much more
750	compressible.	1167	compressible (and the execution a lot slower...).
751		1168
752	If you don't need Coro or threads, you can go with "linuxthreads.old" (or	1169	If you don't need Coro or threads, you can go with "linuxthreads.old" (or
753	no thread support). For Coro, it is highly recommended to switch to a	1170	no thread support). For Coro, it is highly recommended to switch to a
754	uClibc newer than 0.9.31 (at the time of this writing, I used the 20101201	1171	uClibc newer than 0.9.31 (at the time of this writing, I used the 20101201
755	snapshot) and enable NPTL, otherwise Coro needs to be configured with the	1172	snapshot) and enable NPTL, otherwise Coro needs to be configured with the
…		…
757	twice the address space needed for stacks).	1174	twice the address space needed for stacks).
758		1175
759	If you use C<linuxthreads.old>, then you should also be aware that	1176	If you use C<linuxthreads.old>, then you should also be aware that
760	uClibc shares C<errno> between all threads when statically linking. See	1177	uClibc shares C<errno> between all threads when statically linking. See
761	L<http://lists.uclibc.org/pipermail/uclibc/2010-June/044157.html> for a	1178	L<http://lists.uclibc.org/pipermail/uclibc/2010-June/044157.html> for a
762	workaround (And L<https://bugs.uclibc.org/2089> for discussion).	1179	workaround (and L<https://bugs.uclibc.org/2089> for discussion).
763		1180
764	C<ccache> support is also recommended, especially if you want	1181	C<ccache> support is also recommended, especially if you want
765	to play around with buildroot options. Enabling the C<miniperl>	1182	to play around with buildroot options. Enabling the C<miniperl>
766	package will probably enable all options required for a successful	1183	package will probably enable all options required for a successful
767	perl build. F<staticperl> itself additionally needs either C<wget>	1184	perl build. F<staticperl> itself additionally needs either C<wget>
…		…
775	it from working properly in a chroot - either use dash (and link it to	1192	it from working properly in a chroot - either use dash (and link it to
776	F</bin/sh> inside the chroot) or link busybox to F</bin/sh>, using it's	1193	F</bin/sh> inside the chroot) or link busybox to F</bin/sh>, using it's
777	built-in ash shell.	1194	built-in ash shell.
778		1195
779	Finally, you need F</dev/null> inside the chroot for many scripts to work	1196	Finally, you need F</dev/null> inside the chroot for many scripts to work
780	- F<cp /dev/null output/target/dev> or bind-mounting your F</dev> will	1197	- either F<cp /dev/null output/target/dev> or bind-mounting your F</dev>
781	both provide this.	1198	will provide this.
782		1199
783	After you have compiled and set up your buildroot target, you can copy	1200	After you have compiled and set up your buildroot target, you can copy
784	F<staticperl> from the C<App::Staticperl> distribution or from your	1201	F<staticperl> from the C<App::Staticperl> distribution or from your
785	perl f<bin> directory (if you installed it) into the F<output/target>	1202	perl F<bin> directory (if you installed it) into the F<output/target>
786	filesystem, chroot inside and run it.	1203	filesystem, chroot inside and run it.
		1204
		1205	=head1 RECIPES / SPECIFIC MODULES
		1206
		1207	This section contains some common(?) recipes and information about
		1208	problems with some common modules or perl constructs that require extra
		1209	files to be included.
		1210
		1211	=head2 MODULES
		1212
		1213	=over 4
		1214
		1215	=item utf8
		1216
		1217	Some functionality in the utf8 module, such as swash handling (used
		1218	for unicode character ranges in regexes) is implemented in the
		1219	C<"utf8_heavy.pl"> library:
		1220
		1221	-Mutf8_heavy.pl
		1222
		1223	Many Unicode properties in turn are defined in separate modules,
		1224	such as C<"unicore/Heavy.pl"> and more specific data tables such as
		1225	C<"unicore/To/Digit.pl"> or C<"unicore/lib/Perl/Word.pl">. These tables
		1226	are big (7MB uncompressed, although F<staticperl> contains special
		1227	handling for those files), so including them on demand by your application
		1228	only might pay off.
		1229
		1230	To simply include the whole unicode database, use:
		1231
		1232	--incglob '/unicore/**.pl'
		1233
		1234	=item AnyEvent
		1235
		1236	AnyEvent needs a backend implementation that it will load in a delayed
		1237	fashion. The L<AnyEvent::Impl::Perl> backend is the default choice
		1238	for AnyEvent if it can't find anything else, and is usually a safe
		1239	fallback. If you plan to use e.g. L<EV> (L<POE>...), then you need to
		1240	include the L<AnyEvent::Impl::EV> (L<AnyEvent::Impl::POE>...) backend as
		1241	well.
		1242
		1243	If you want to handle IRIs or IDNs (L<AnyEvent::Util> punycode and idn
		1244	functions), you also need to include C<"AnyEvent/Util/idna.pl"> and
		1245	C<"AnyEvent/Util/uts46data.pl">.
		1246
		1247	Or you can use C<--usepacklists> and specify C<-MAnyEvent> to include
		1248	everything.
		1249
		1250	=item Cairo
		1251
		1252	See Glib, same problem, same solution.
		1253
		1254	=item Carp
		1255
		1256	Carp had (in older versions of perl) a dependency on L<Carp::Heavy>. As of
		1257	perl 5.12.2 (maybe earlier), this dependency no longer exists.
		1258
		1259	=item Config
		1260
		1261	The F<perl -V> switch (as well as many modules) needs L<Config>, which in
		1262	turn might need L<"Config_heavy.pl">. Including the latter gives you
		1263	both.
		1264
		1265	=item Glib
		1266
		1267	Glib literally requires Glib to be installed already to build - it tries
		1268	to fake this by running Glib out of the build directory before being
		1269	built. F<staticperl> tries to work around this by forcing C<MAN1PODS> and
		1270	C<MAN3PODS> to be empty via the C<PERL_MM_OPT> environment variable.
		1271
		1272	=item Gtk2
		1273
		1274	See Pango, same problems, same solution.
		1275
		1276	=item Pango
		1277
		1278	In addition to the C<MAN3PODS> problem in Glib, Pango also routes around
		1279	L<ExtUtils::MakeMaker> by compiling its files on its own. F<staticperl>
		1280	tries to patch L<ExtUtils::MM_Unix> to route around Pango.
		1281
		1282	=item Term::ReadLine::Perl
		1283
		1284	Also needs L<Term::ReadLine::readline>, or C<--usepacklists>.
		1285
		1286	=item URI
		1287
		1288	URI implements schemes as separate modules - the generic URL scheme is
		1289	implemented in L<URI::_generic>, HTTP is implemented in L<URI::http>. If
		1290	you need to use any of these schemes, you should include these manually,
		1291	or use C<--usepacklists>.
		1292
		1293	=back
		1294
		1295	=head2 RECIPES
		1296
		1297	=over 4
		1298
		1299	=item Just link everything in
		1300
		1301	To link just about everything installed in the perl library into a new
		1302	perl, try this (the first time this runs it will take a long time, as a
		1303	lot of files need to be parsed):
		1304
		1305	staticperl mkperl -v --strip ppi --incglob '*'
		1306
		1307	If you don't mind the extra megabytes, this can be a very effective way of
		1308	creating bundles without having to worry about forgetting any modules.
		1309
		1310	You get even more useful variants of this method by first selecting
		1311	everything, and then excluding stuff you are reasonable sure not to need -
		1312	L<bigperl\|http://staticperl.schmorp.de/bigperl.html> uses this approach.
		1313
		1314	=item Getting rid of netdb functions
		1315
		1316	The perl core has lots of netdb functions (C<getnetbyname>, C<getgrent>
		1317	and so on) that few applications use. You can avoid compiling them in by
		1318	putting the following fragment into a C<preconfigure> hook:
		1319
		1320	preconfigure() {
		1321	for sym in \
		1322	d_getgrnam_r d_endgrent d_endgrent_r d_endhent \
		1323	d_endhostent_r d_endnent d_endnetent_r d_endpent \
		1324	d_endprotoent_r d_endpwent d_endpwent_r d_endsent \
		1325	d_endservent_r d_getgrent d_getgrent_r d_getgrgid_r \
		1326	d_getgrnam_r d_gethbyaddr d_gethent d_getsbyport \
		1327	d_gethostbyaddr_r d_gethostbyname_r d_gethostent_r \
		1328	d_getlogin_r d_getnbyaddr d_getnbyname d_getnent \
		1329	d_getnetbyaddr_r d_getnetbyname_r d_getnetent_r \
		1330	d_getpent d_getpbyname d_getpbynumber d_getprotobyname_r \
		1331	d_getprotobynumber_r d_getprotoent_r d_getpwent \
		1332	d_getpwent_r d_getpwnam_r d_getpwuid_r d_getsent \
		1333	d_getservbyname_r d_getservbyport_r d_getservent_r \
		1334	d_getspnam_r d_getsbyname
		1335	# d_gethbyname
		1336	do
		1337	PERL_CONFIGURE="$PERL_CONFIGURE -U$sym"
		1338	done
		1339	}
		1340
		1341	This mostly gains space when linking statically, as the functions will
		1342	likely not be linked in. The gain for dynamically-linked binaries is
		1343	smaller.
		1344
		1345	Also, this leaves C<gethostbyname> in - not only is it actually used
		1346	often, the L<Socket> module also exposes it, so leaving it out usually
		1347	gains little. Why Socket exposes a C function that is in the core already
		1348	is anybody's guess.
		1349
		1350	=back
787		1351
788	=head1 AUTHOR	1352	=head1 AUTHOR
789		1353
790	Marc Lehmann <schmorp@schmorp.de>	1354	Marc Lehmann <schmorp@schmorp.de>
791	http://software.schmorp.de/pkg/staticperl.html	1355	http://software.schmorp.de/pkg/staticperl.html

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing App-Staticperl/staticperl.pod (file contents): Revision 1.16 by root, Wed Dec 8 23:03:21 2010 UTC vs. Revision 1.45 by root, Mon Jun 27 21:56:51 2011 UTC

Diff Legend

Comparing App-Staticperl/staticperl.pod (file contents):
Revision 1.16 by root, Wed Dec 8 23:03:21 2010 UTC vs.
Revision 1.45 by root, Mon Jun 27 21:56:51 2011 UTC