[ViewVC] Diff of: cvs/Coro/Coro.pm

Comparing Coro/Coro.pm (file contents):
Revision 1.148 by root, Fri Oct 5 20:11:25 2007 UTC vs.
Revision 1.268 by root, Thu Oct 1 23:16:27 2009 UTC

…		…
1	=head1 NAME	1	=head1 NAME
2		2
3	Coro - coroutine process abstraction	3	Coro - the only real threads in perl
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	use Coro;	7	use Coro;
8		8
9	async {	9	async {
10	# some asynchronous thread of execution	10	# some asynchronous thread of execution
		11	print "2\n";
		12	cede; # yield back to main
		13	print "4\n";
11	};	14	};
12		15	print "1\n";
13	# alternatively create an async coroutine like this:	16	cede; # yield to coro
14		17	print "3\n";
15	sub some_func : Coro {	18	cede; # and again
16	# some more async code	19
17	}	20	# use locking
18		21	use Coro::Semaphore;
19	cede;	22	my $lock = new Coro::Semaphore;
		23	my $locked;
		24
		25	$lock->down;
		26	$locked = 1;
		27	$lock->up;
20		28
21	=head1 DESCRIPTION	29	=head1 DESCRIPTION
22		30
23	This module collection manages coroutines. Coroutines are similar	31	For a tutorial-style introduction, please read the L<Coro::Intro>
24	to threads but don't run in parallel at the same time even on SMP	32	manpage. This manpage mainly contains reference information.
25	machines. The specific flavor of coroutine used in this module also
26	guarantees you that it will not switch between coroutines unless
27	necessary, at easily-identified points in your program, so locking and
28	parallel access are rarely an issue, making coroutine programming much
29	safer than threads programming.
30		33
31	(Perl, however, does not natively support real threads but instead does a	34	This module collection manages continuations in general, most often in
32	very slow and memory-intensive emulation of processes using threads. This	35	the form of cooperative threads (also called coros, or simply "coro"
33	is a performance win on Windows machines, and a loss everywhere else).	36	in the documentation). They are similar to kernel threads but don't (in
		37	general) run in parallel at the same time even on SMP machines. The
		38	specific flavor of thread offered by this module also guarantees you that
		39	it will not switch between threads unless necessary, at easily-identified
		40	points in your program, so locking and parallel access are rarely an
		41	issue, making thread programming much safer and easier than using other
		42	thread models.
34		43
		44	Unlike the so-called "Perl threads" (which are not actually real threads
		45	but only the windows process emulation (see section of same name for more
		46	details) ported to unix, and as such act as processes), Coro provides
		47	a full shared address space, which makes communication between threads
		48	very easy. And Coro's threads are fast, too: disabling the Windows
		49	process emulation code in your perl and using Coro can easily result in
		50	a two to four times speed increase for your programs. A parallel matrix
		51	multiplication benchmark runs over 300 times faster on a single core than
		52	perl's pseudo-threads on a quad core using all four cores.
		53
		54	Coro achieves that by supporting multiple running interpreters that share
		55	data, which is especially useful to code pseudo-parallel processes and
		56	for event-based programming, such as multiple HTTP-GET requests running
		57	concurrently. See L<Coro::AnyEvent> to learn more on how to integrate Coro
		58	into an event-based environment.
		59
35	In this module, coroutines are defined as "callchain + lexical variables +	60	In this module, a thread is defined as "callchain + lexical variables +
36	@_ + $_ + $@ + $/ + C stack), that is, a coroutine has its own callchain,	61	some package variables + C stack), that is, a thread has its own callchain,
37	its own set of lexicals and its own set of perls most important global	62	its own set of lexicals and its own set of perls most important global
38	variables.	63	variables (see L<Coro::State> for more configuration and background info).
		64
		65	See also the C<SEE ALSO> section at the end of this document - the Coro
		66	module family is quite large.
39		67
40	=cut	68	=cut
41		69
42	package Coro;	70	package Coro;
43		71
44	use strict;	72	use common::sense;
45	no warnings "uninitialized";	73
		74	use Carp ();
		75
		76	use Guard ();
46		77
47	use Coro::State;	78	use Coro::State;
48		79
49	use base qw(Coro::State Exporter);	80	use base qw(Coro::State Exporter);
50		81
51	our $idle; # idle handler	82	our $idle; # idle handler
52	our $main; # main coroutine	83	our $main; # main coro
53	our $current; # current coroutine	84	our $current; # current coro
54		85
55	our $VERSION = '4.01';	86	our $VERSION = 5.17;
56		87
57	our @EXPORT = qw(async async_pool cede schedule terminate current unblock_sub);	88	our @EXPORT = qw(async async_pool cede schedule terminate current unblock_sub);
58	our %EXPORT_TAGS = (	89	our %EXPORT_TAGS = (
59	prio => [qw(PRIO_MAX PRIO_HIGH PRIO_NORMAL PRIO_LOW PRIO_IDLE PRIO_MIN)],	90	prio => [qw(PRIO_MAX PRIO_HIGH PRIO_NORMAL PRIO_LOW PRIO_IDLE PRIO_MIN)],
60	);	91	);
61	our @EXPORT_OK = (@{$EXPORT_TAGS{prio}}, qw(nready));	92	our @EXPORT_OK = (@{$EXPORT_TAGS{prio}}, qw(nready));
62		93
63	{	94	=head1 GLOBAL VARIABLES
64	my @async;
65	my $init;
66
67	# this way of handling attributes simply is NOT scalable ;()
68	sub import {
69	no strict 'refs';
70
71	Coro->export_to_level (1, @_);
72
73	my $old = *{(caller)[0]."::MODIFY_CODE_ATTRIBUTES"}{CODE};
74	*{(caller)[0]."::MODIFY_CODE_ATTRIBUTES"} = sub {
75	my ($package, $ref) = (shift, shift);
76	my @attrs;
77	for (@_) {
78	if ($_ eq "Coro") {
79	push @async, $ref;
80	unless ($init++) {
81	eval q{
82	sub INIT {
83	&async(pop @async) while @async;
84	}
85	};
86	}
87	} else {
88	push @attrs, $_;
89	}
90	}
91	return $old ? $old->($package, $ref, @attrs) : @attrs;
92	};
93	}
94
95	}
96		95
97	=over 4	96	=over 4
98		97
99	=item $main	98	=item $Coro::main
100		99
101	This coroutine represents the main program.	100	This variable stores the Coro object that represents the main
		101	program. While you cna C<ready> it and do most other things you can do to
		102	coro, it is mainly useful to compare again C<$Coro::current>, to see
		103	whether you are running in the main program or not.
102		104
103	=cut	105	=cut
104		106
105	$main = new Coro;	107	# $main is now being initialised by Coro::State
106		108
107	=item $current (or as function: current)	109	=item $Coro::current
108		110
109	The current coroutine (the last coroutine switched to). The initial value	111	The Coro object representing the current coro (the last
		112	coro that the Coro scheduler switched to). The initial value is
110	is C<$main> (of course).	113	C<$Coro::main> (of course).
111		114
112	This variable is B<strictly> I<read-only>. It is provided for performance	115	This variable is B<strictly> I<read-only>. You can take copies of the
113	reasons. If performance is not essential you are encouraged to use the	116	value stored in it and use it as any other Coro object, but you must
114	C<Coro::current> function instead.	117	not otherwise modify the variable itself.
115		118
116	=cut	119	=cut
117		120
118	$main->{desc} = "[main::]";
119
120	# maybe some other module used Coro::Specific before...
121	$main->{_specific} = $current->{_specific}
122	if $current;
123
124	_set_current $main;
125
126	sub current() { $current }	121	sub current() { $current } # [DEPRECATED]
127		122
128	=item $idle	123	=item $Coro::idle
129		124
		125	This variable is mainly useful to integrate Coro into event loops. It is
		126	usually better to rely on L<Coro::AnyEvent> or L<Coro::EV>, as this is
		127	pretty low-level functionality.
		128
		129	This variable stores either a Coro object or a callback.
		130
130	A callback that is called whenever the scheduler finds no ready coroutines	131	If it is a callback, the it is called whenever the scheduler finds no
131	to run. The default implementation prints "FATAL: deadlock detected" and	132	ready coros to run. The default implementation prints "FATAL:
132	exits, because the program has no other way to continue.	133	deadlock detected" and exits, because the program has no other way to
		134	continue.
133		135
		136	If it is a coro object, then this object will be readied (without
		137	invoking any ready hooks, however) when the scheduler finds no other ready
		138	coros to run.
		139
134	This hook is overwritten by modules such as C<Coro::Timer> and	140	This hook is overwritten by modules such as C<Coro::EV> and
135	C<Coro::Event> to wait on an external event that hopefully wake up a	141	C<Coro::AnyEvent> to wait on an external event that hopefully wake up a
136	coroutine so the scheduler can run it.	142	coro so the scheduler can run it.
		143
		144	Note that the callback I<must not>, under any circumstances, block
		145	the current coro. Normally, this is achieved by having an "idle
		146	coro" that calls the event loop and then blocks again, and then
		147	readying that coro in the idle handler, or by simply placing the idle
		148	coro in this variable.
		149
		150	See L<Coro::Event> or L<Coro::AnyEvent> for examples of using this
		151	technique.
137		152
138	Please note that if your callback recursively invokes perl (e.g. for event	153	Please note that if your callback recursively invokes perl (e.g. for event
139	handlers), then it must be prepared to be called recursively.	154	handlers), then it must be prepared to be called recursively itself.
140		155
141	=cut	156	=cut
142		157
143	$idle = sub {	158	$idle = sub {
144	require Carp;	159	warn "oi\n";#d#
145	Carp::croak ("FATAL: deadlock detected");	160	Carp::confess ("FATAL: deadlock detected");
146	};	161	};
147		162
148	sub _cancel {
149	my ($self) = @_;
150
151	# free coroutine data and mark as destructed
152	$self->_destroy
153	or return;
154
155	# call all destruction callbacks
156	$_->(@{$self->{_status}})
157	for @{(delete $self->{_on_destroy}) \|\| []};
158	}
159
160	# this coroutine is necessary because a coroutine	163	# this coro is necessary because a coro
161	# cannot destroy itself.	164	# cannot destroy itself.
162	my @destroy;	165	our @destroy;
163	my $manager;	166	our $manager;
164		167
165	$manager = new Coro sub {	168	$manager = new Coro sub {
166	while () {	169	while () {
167	(shift @destroy)->_cancel	170	Coro::State::cancel shift @destroy
168	while @destroy;	171	while @destroy;
169		172
170	&schedule;	173	&schedule;
171	}	174	}
172	};	175	};
173	$manager->desc ("[coro manager]");	176	$manager->{desc} = "[coro manager]";
174	$manager->prio (PRIO_MAX);	177	$manager->prio (PRIO_MAX);
175		178
176	# static methods. not really.
177
178	=back	179	=back
179		180
180	=head2 STATIC METHODS	181	=head1 SIMPLE CORO CREATION
181
182	Static methods are actually functions that operate on the current coroutine only.
183		182
184	=over 4	183	=over 4
185		184
186	=item async { ... } [@args...]	185	=item async { ... } [@args...]
187		186
188	Create a new asynchronous coroutine and return it's coroutine object	187	Create a new coro and return its Coro object (usually
189	(usually unused). When the sub returns the new coroutine is automatically	188	unused). The coro will be put into the ready queue, so
		189	it will start running automatically on the next scheduler run.
		190
		191	The first argument is a codeblock/closure that should be executed in the
		192	coro. When it returns argument returns the coro is automatically
190	terminated.	193	terminated.
191		194
		195	The remaining arguments are passed as arguments to the closure.
		196
192	See the C<Coro::State::new> constructor for info about the coroutine	197	See the C<Coro::State::new> constructor for info about the coro
193	environment.	198	environment in which coro are executed.
194		199
195	Calling C<exit> in a coroutine will do the same as calling exit outside	200	Calling C<exit> in a coro will do the same as calling exit outside
196	the coroutine. Likewise, when the coroutine dies, the program will exit,	201	the coro. Likewise, when the coro dies, the program will exit,
197	just as it would in the main program.	202	just as it would in the main program.
198		203
		204	If you do not want that, you can provide a default C<die> handler, or
		205	simply avoid dieing (by use of C<eval>).
		206
199	# create a new coroutine that just prints its arguments	207	Example: Create a new coro that just prints its arguments.
		208
200	async {	209	async {
201	print "@_\n";	210	print "@_\n";
202	} 1,2,3,4;	211	} 1,2,3,4;
203		212
204	=cut
205
206	sub async(&@) {
207	my $coro = new Coro @_;
208	$coro->ready;
209	$coro
210	}
211
212	=item async_pool { ... } [@args...]	213	=item async_pool { ... } [@args...]
213		214
214	Similar to C<async>, but uses a coroutine pool, so you should not call	215	Similar to C<async>, but uses a coro pool, so you should not call
215	terminate or join (although you are allowed to), and you get a coroutine	216	terminate or join on it (although you are allowed to), and you get a
216	that might have executed other code already (which can be good or bad :).	217	coro that might have executed other code already (which can be good
		218	or bad :).
217		219
		220	On the plus side, this function is about twice as fast as creating (and
		221	destroying) a completely new coro, so if you need a lot of generic
		222	coros in quick successsion, use C<async_pool>, not C<async>.
		223
218	Also, the block is executed in an C<eval> context and a warning will be	224	The code block is executed in an C<eval> context and a warning will be
219	issued in case of an exception instead of terminating the program, as	225	issued in case of an exception instead of terminating the program, as
220	C<async> does. As the coroutine is being reused, stuff like C<on_destroy>	226	C<async> does. As the coro is being reused, stuff like C<on_destroy>
221	will not work in the expected way, unless you call terminate or cancel,	227	will not work in the expected way, unless you call terminate or cancel,
222	which somehow defeats the purpose of pooling.	228	which somehow defeats the purpose of pooling (but is fine in the
		229	exceptional case).
223		230
224	The priority will be reset to C<0> after each job, tracing will be	231	The priority will be reset to C<0> after each run, tracing will be
225	disabled, the description will be reset and the default output filehandle	232	disabled, the description will be reset and the default output filehandle
226	gets restored, so you can change alkl these. Otherwise the coroutine will	233	gets restored, so you can change all these. Otherwise the coro will
227	be re-used "as-is": most notably if you change other per-coroutine global	234	be re-used "as-is": most notably if you change other per-coro global
228	stuff such as C<$/> you need to revert that change, which is most simply	235	stuff such as C<$/> you I<must needs> revert that change, which is most
229	done by using local as in C< local $/ >.	236	simply done by using local as in: C<< local $/ >>.
230		237
231	The pool size is limited to 8 idle coroutines (this can be adjusted by	238	The idle pool size is limited to C<8> idle coros (this can be
232	changing $Coro::POOL_SIZE), and there can be as many non-idle coros as	239	adjusted by changing $Coro::POOL_SIZE), but there can be as many non-idle
233	required.	240	coros as required.
234		241
235	If you are concerned about pooled coroutines growing a lot because a	242	If you are concerned about pooled coros growing a lot because a
236	single C<async_pool> used a lot of stackspace you can e.g. C<async_pool	243	single C<async_pool> used a lot of stackspace you can e.g. C<async_pool
237	{ terminate }> once per second or so to slowly replenish the pool. In	244	{ terminate }> once per second or so to slowly replenish the pool. In
238	addition to that, when the stacks used by a handler grows larger than 16kb	245	addition to that, when the stacks used by a handler grows larger than 32kb
239	(adjustable with $Coro::POOL_RSS) it will also exit.	246	(adjustable via $Coro::POOL_RSS) it will also be destroyed.
240		247
241	=cut	248	=cut
242		249
243	our $POOL_SIZE = 8;	250	our $POOL_SIZE = 8;
244	our $POOL_RSS = 16 * 1024;	251	our $POOL_RSS = 32 * 1024;
245	our @async_pool;	252	our @async_pool;
246		253
247	sub pool_handler {	254	sub pool_handler {
248	my $cb;
249
250	while () {	255	while () {
251	eval {	256	eval {
252	while () {	257	&{&_pool_handler} while 1;
253	_pool_1 $cb;
254	&$cb;
255	_pool_2 $cb;
256	&schedule;
257	}
258	};	258	};
259		259
260	last if $@ eq "\3terminate\2\n";
261	warn $@ if $@;	260	warn $@ if $@;
262	}	261	}
263	}	262	}
264		263
265	sub async_pool(&@) {	264	=back
266	# this is also inlined into the unlock_scheduler
267	my $coro = (pop @async_pool) \|\| new Coro \&pool_handler;
268		265
269	$coro->{_invoke} = [@_];	266	=head1 STATIC METHODS
270	$coro->ready;
271		267
272	$coro	268	Static methods are actually functions that implicitly operate on the
273	}	269	current coro.
		270
		271	=over 4
274		272
275	=item schedule	273	=item schedule
276		274
277	Calls the scheduler. Please note that the current coroutine will not be put	275	Calls the scheduler. The scheduler will find the next coro that is
		276	to be run from the ready queue and switches to it. The next coro
		277	to be run is simply the one with the highest priority that is longest
		278	in its ready queue. If there is no coro ready, it will clal the
		279	C<$Coro::idle> hook.
		280
		281	Please note that the current coro will I<not> be put into the ready
278	into the ready queue, so calling this function usually means you will	282	queue, so calling this function usually means you will never be called
279	never be called again unless something else (e.g. an event handler) calls	283	again unless something else (e.g. an event handler) calls C<< ->ready >>,
280	ready.	284	thus waking you up.
281		285
282	The canonical way to wait on external events is this:	286	This makes C<schedule> I<the> generic method to use to block the current
		287	coro and wait for events: first you remember the current coro in
		288	a variable, then arrange for some callback of yours to call C<< ->ready
		289	>> on that once some event happens, and last you call C<schedule> to put
		290	yourself to sleep. Note that a lot of things can wake your coro up,
		291	so you need to check whether the event indeed happened, e.g. by storing the
		292	status in a variable.
283		293
284	{	294	See B<HOW TO WAIT FOR A CALLBACK>, below, for some ways to wait for callbacks.
285	# remember current coroutine
286	my $current = $Coro::current;
287		295
288	# register a hypothetical event handler	296	=item cede
289	on_event_invoke sub {	297
290	# wake up sleeping coroutine	298	"Cede" to other coros. This function puts the current coro into
291	$current->ready;	299	the ready queue and calls C<schedule>, which has the effect of giving
292	undef $current;	300	up the current "timeslice" to other coros of the same or higher
		301	priority. Once your coro gets its turn again it will automatically be
		302	resumed.
		303
		304	This function is often called C<yield> in other languages.
		305
		306	=item Coro::cede_notself
		307
		308	Works like cede, but is not exported by default and will cede to I<any>
		309	coro, regardless of priority. This is useful sometimes to ensure
		310	progress is made.
		311
		312	=item terminate [arg...]
		313
		314	Terminates the current coro with the given status values (see L<cancel>).
		315
		316	=item Coro::on_enter BLOCK, Coro::on_leave BLOCK
		317
		318	These function install enter and leave winders in the current scope. The
		319	enter block will be executed when on_enter is called and whenever the
		320	current coro is re-entered by the scheduler, while the leave block is
		321	executed whenever the current coro is blocked by the scheduler, and
		322	also when the containing scope is exited (by whatever means, be it exit,
		323	die, last etc.).
		324
		325	I<Neither invoking the scheduler, nor exceptions, are allowed within those
		326	BLOCKs>. That means: do not even think about calling C<die> without an
		327	eval, and do not even think of entering the scheduler in any way.
		328
		329	Since both BLOCKs are tied to the current scope, they will automatically
		330	be removed when the current scope exits.
		331
		332	These functions implement the same concept as C<dynamic-wind> in scheme
		333	does, and are useful when you want to localise some resource to a specific
		334	coro.
		335
		336	They slow down thread switching considerably for coros that use them
		337	(about 40% for a BLOCK with a single assignment, so thread switching is
		338	still reasonably fast if the handlers are fast).
		339
		340	These functions are best understood by an example: The following function
		341	will change the current timezone to "Antarctica/South_Pole", which
		342	requires a call to C<tzset>, but by using C<on_enter> and C<on_leave>,
		343	which remember/change the current timezone and restore the previous
		344	value, respectively, the timezone is only changed for the coro that
		345	installed those handlers.
		346
		347	use POSIX qw(tzset);
		348
		349	async {
		350	my $old_tz; # store outside TZ value here
		351
		352	Coro::on_enter {
		353	$old_tz = $ENV{TZ}; # remember the old value
		354
		355	$ENV{TZ} = "Antarctica/South_Pole";
		356	tzset; # enable new value
293	};	357	};
294		358
295	# call schedule until event occurred.	359	Coro::on_leave {
296	# in case we are woken up for other reasons	360	$ENV{TZ} = $old_tz;
297	# (current still defined), loop.	361	tzset; # restore old value
298	Coro::schedule while $current;	362	};
		363
		364	# at this place, the timezone is Antarctica/South_Pole,
		365	# without disturbing the TZ of any other coro.
299	}	366	};
300		367
301	=item cede	368	This can be used to localise about any resource (locale, uid, current
		369	working directory etc.) to a block, despite the existance of other
		370	coros.
302		371
303	"Cede" to other coroutines. This function puts the current coroutine into the	372	Another interesting example implements time-sliced multitasking using
304	ready queue and calls C<schedule>, which has the effect of giving up the	373	interval timers (this could obviously be optimised, but does the job):
305	current "timeslice" to other coroutines of the same or higher priority.
306		374
307	Returns true if at least one coroutine switch has happened.	375	# "timeslice" the given block
		376	sub timeslice(&) {
		377	use Time::HiRes ();
308		378
309	=item Coro::cede_notself	379	Coro::on_enter {
		380	# on entering the thread, we set an VTALRM handler to cede
		381	$SIG{VTALRM} = sub { cede };
		382	# and then start the interval timer
		383	Time::HiRes::setitimer &Time::HiRes::ITIMER_VIRTUAL, 0.01, 0.01;
		384	};
		385	Coro::on_leave {
		386	# on leaving the thread, we stop the interval timer again
		387	Time::HiRes::setitimer &Time::HiRes::ITIMER_VIRTUAL, 0, 0;
		388	};
310		389
311	Works like cede, but is not exported by default and will cede to any	390	&{+shift};
312	coroutine, regardless of priority, once.	391	}
313		392
314	Returns true if at least one coroutine switch has happened.	393	# use like this:
		394	timeslice {
		395	# The following is an endless loop that would normally
		396	# monopolise the process. Since it runs in a timesliced
		397	# environment, it will regularly cede to other threads.
		398	while () { }
		399	};
315		400
316	=item terminate [arg...]
317
318	Terminates the current coroutine with the given status values (see L<cancel>).
319		401
320	=item killall	402	=item killall
321		403
322	Kills/terminates/cancels all coroutines except the currently running	404	Kills/terminates/cancels all coros except the currently running one.
323	one. This is useful after a fork, either in the child or the parent, as
324	usually only one of them should inherit the running coroutines.
325		405
326	=cut	406	Note that while this will try to free some of the main interpreter
		407	resources if the calling coro isn't the main coro, but one
		408	cannot free all of them, so if a coro that is not the main coro
		409	calls this function, there will be some one-time resource leak.
327		410
328	sub terminate {	411	=cut
329	$current->cancel (@_);
330	}
331		412
332	sub killall {	413	sub killall {
333	for (Coro::State::list) {	414	for (Coro::State::list) {
334	$_->cancel	415	$_->cancel
335	if $_ != $current && UNIVERSAL::isa $_, "Coro";	416	if $_ != $current && UNIVERSAL::isa $_, "Coro";
336	}	417	}
337	}	418	}
338		419
339	=back	420	=back
340		421
341	# dynamic methods
342
343	=head2 COROUTINE METHODS	422	=head1 CORO OBJECT METHODS
344		423
345	These are the methods you can call on coroutine objects.	424	These are the methods you can call on coro objects (or to create
		425	them).
346		426
347	=over 4	427	=over 4
348		428
349	=item new Coro \&sub [, @args...]	429	=item new Coro \&sub [, @args...]
350		430
351	Create a new coroutine and return it. When the sub returns the coroutine	431	Create a new coro and return it. When the sub returns, the coro
352	automatically terminates as if C<terminate> with the returned values were	432	automatically terminates as if C<terminate> with the returned values were
353	called. To make the coroutine run you must first put it into the ready queue	433	called. To make the coro run you must first put it into the ready
354	by calling the ready method.	434	queue by calling the ready method.
355		435
356	See C<async> and C<Coro::State::new> for additional info about the	436	See C<async> and C<Coro::State::new> for additional info about the
357	coroutine environment.	437	coro environment.
358		438
359	=cut	439	=cut
360		440
361	sub _run_coro {	441	sub _coro_run {
362	terminate &{+shift};	442	terminate &{+shift};
363	}	443	}
364		444
365	sub new {
366	my $class = shift;
367
368	$class->SUPER::new (\&_run_coro, @_)
369	}
370
371	=item $success = $coroutine->ready	445	=item $success = $coro->ready
372		446
373	Put the given coroutine into the ready queue (according to it's priority)	447	Put the given coro into the end of its ready queue (there is one
374	and return true. If the coroutine is already in the ready queue, do nothing	448	queue for each priority) and return true. If the coro is already in
375	and return false.	449	the ready queue, do nothing and return false.
376		450
		451	This ensures that the scheduler will resume this coro automatically
		452	once all the coro of higher priority and all coro of the same
		453	priority that were put into the ready queue earlier have been resumed.
		454
		455	=item $coro->suspend
		456
		457	Suspends the specified coro. A suspended coro works just like any other
		458	coro, except that the scheduler will not select a suspended coro for
		459	execution.
		460
		461	Suspending a coro can be useful when you want to keep the coro from
		462	running, but you don't want to destroy it, or when you want to temporarily
		463	freeze a coro (e.g. for debugging) to resume it later.
		464
		465	A scenario for the former would be to suspend all (other) coros after a
		466	fork and keep them alive, so their destructors aren't called, but new
		467	coros can be created.
		468
		469	=item $coro->resume
		470
		471	If the specified coro was suspended, it will be resumed. Note that when
		472	the coro was in the ready queue when it was suspended, it might have been
		473	unreadied by the scheduler, so an activation might have been lost.
		474
		475	To avoid this, it is best to put a suspended coro into the ready queue
		476	unconditionally, as every synchronisation mechanism must protect itself
		477	against spurious wakeups, and the one in the Coro family certainly do
		478	that.
		479
377	=item $is_ready = $coroutine->is_ready	480	=item $is_ready = $coro->is_ready
378		481
379	Return wether the coroutine is currently the ready queue or not,	482	Returns true iff the Coro object is in the ready queue. Unless the Coro
		483	object gets destroyed, it will eventually be scheduled by the scheduler.
380		484
		485	=item $is_running = $coro->is_running
		486
		487	Returns true iff the Coro object is currently running. Only one Coro object
		488	can ever be in the running state (but it currently is possible to have
		489	multiple running Coro::States).
		490
		491	=item $is_suspended = $coro->is_suspended
		492
		493	Returns true iff this Coro object has been suspended. Suspended Coros will
		494	not ever be scheduled.
		495
381	=item $coroutine->cancel (arg...)	496	=item $coro->cancel (arg...)
382		497
383	Terminates the given coroutine and makes it return the given arguments as	498	Terminates the given Coro and makes it return the given arguments as
384	status (default: the empty list). Never returns if the coroutine is the	499	status (default: the empty list). Never returns if the Coro is the
385	current coroutine.	500	current Coro.
386		501
387	=cut	502	=cut
388		503
389	sub cancel {	504	sub cancel {
390	my $self = shift;	505	my $self = shift;
391	$self->{_status} = [@_];
392		506
393	if ($current == $self) {	507	if ($current == $self) {
394	push @destroy, $self;	508	terminate @_;
395	$manager->ready;
396	&schedule while 1;
397	} else {	509	} else {
398	$self->_cancel;	510	$self->{_status} = [@_];
		511	Coro::State::cancel $self;
399	}	512	}
400	}	513	}
401		514
		515	=item $coro->schedule_to
		516
		517	Puts the current coro to sleep (like C<Coro::schedule>), but instead
		518	of continuing with the next coro from the ready queue, always switch to
		519	the given coro object (regardless of priority etc.). The readyness
		520	state of that coro isn't changed.
		521
		522	This is an advanced method for special cases - I'd love to hear about any
		523	uses for this one.
		524
		525	=item $coro->cede_to
		526
		527	Like C<schedule_to>, but puts the current coro into the ready
		528	queue. This has the effect of temporarily switching to the given
		529	coro, and continuing some time later.
		530
		531	This is an advanced method for special cases - I'd love to hear about any
		532	uses for this one.
		533
		534	=item $coro->throw ([$scalar])
		535
		536	If C<$throw> is specified and defined, it will be thrown as an exception
		537	inside the coro at the next convenient point in time. Otherwise
		538	clears the exception object.
		539
		540	Coro will check for the exception each time a schedule-like-function
		541	returns, i.e. after each C<schedule>, C<cede>, C<< Coro::Semaphore->down
		542	>>, C<< Coro::Handle->readable >> and so on. Most of these functions
		543	detect this case and return early in case an exception is pending.
		544
		545	The exception object will be thrown "as is" with the specified scalar in
		546	C<$@>, i.e. if it is a string, no line number or newline will be appended
		547	(unlike with C<die>).
		548
		549	This can be used as a softer means than C<cancel> to ask a coro to
		550	end itself, although there is no guarantee that the exception will lead to
		551	termination, and if the exception isn't caught it might well end the whole
		552	program.
		553
		554	You might also think of C<throw> as being the moral equivalent of
		555	C<kill>ing a coro with a signal (in this case, a scalar).
		556
402	=item $coroutine->join	557	=item $coro->join
403		558
404	Wait until the coroutine terminates and return any values given to the	559	Wait until the coro terminates and return any values given to the
405	C<terminate> or C<cancel> functions. C<join> can be called concurrently	560	C<terminate> or C<cancel> functions. C<join> can be called concurrently
406	from multiple coroutines.	561	from multiple coro, and all will be resumed and given the status
		562	return once the C<$coro> terminates.
407		563
408	=cut	564	=cut
409		565
410	sub join {	566	sub join {
411	my $self = shift;	567	my $self = shift;
422	}	578	}
423		579
424	wantarray ? @{$self->{_status}} : $self->{_status}[0];	580	wantarray ? @{$self->{_status}} : $self->{_status}[0];
425	}	581	}
426		582
427	=item $coroutine->on_destroy (\&cb)	583	=item $coro->on_destroy (\&cb)
428		584
429	Registers a callback that is called when this coroutine gets destroyed,	585	Registers a callback that is called when this coro gets destroyed,
430	but before it is joined. The callback gets passed the terminate arguments,	586	but before it is joined. The callback gets passed the terminate arguments,
431	if any.	587	if any, and I<must not> die, under any circumstances.
432		588
433	=cut	589	=cut
434		590
435	sub on_destroy {	591	sub on_destroy {
436	my ($self, $cb) = @_;	592	my ($self, $cb) = @_;
437		593
438	push @{ $self->{_on_destroy} }, $cb;	594	push @{ $self->{_on_destroy} }, $cb;
439	}	595	}
440		596
441	=item $oldprio = $coroutine->prio ($newprio)	597	=item $oldprio = $coro->prio ($newprio)
442		598
443	Sets (or gets, if the argument is missing) the priority of the	599	Sets (or gets, if the argument is missing) the priority of the
444	coroutine. Higher priority coroutines get run before lower priority	600	coro. Higher priority coro get run before lower priority
445	coroutines. Priorities are small signed integers (currently -4 .. +3),	601	coro. Priorities are small signed integers (currently -4 .. +3),
446	that you can refer to using PRIO_xxx constants (use the import tag :prio	602	that you can refer to using PRIO_xxx constants (use the import tag :prio
447	to get then):	603	to get then):
448		604
449	PRIO_MAX > PRIO_HIGH > PRIO_NORMAL > PRIO_LOW > PRIO_IDLE > PRIO_MIN	605	PRIO_MAX > PRIO_HIGH > PRIO_NORMAL > PRIO_LOW > PRIO_IDLE > PRIO_MIN
450	3 > 1 > 0 > -1 > -3 > -4	606	3 > 1 > 0 > -1 > -3 > -4
451		607
452	# set priority to HIGH	608	# set priority to HIGH
453	current->prio(PRIO_HIGH);	609	current->prio (PRIO_HIGH);
454		610
455	The idle coroutine ($Coro::idle) always has a lower priority than any	611	The idle coro ($Coro::idle) always has a lower priority than any
456	existing coroutine.	612	existing coro.
457		613
458	Changing the priority of the current coroutine will take effect immediately,	614	Changing the priority of the current coro will take effect immediately,
459	but changing the priority of coroutines in the ready queue (but not	615	but changing the priority of coro in the ready queue (but not
460	running) will only take effect after the next schedule (of that	616	running) will only take effect after the next schedule (of that
461	coroutine). This is a bug that will be fixed in some future version.	617	coro). This is a bug that will be fixed in some future version.
462		618
463	=item $newprio = $coroutine->nice ($change)	619	=item $newprio = $coro->nice ($change)
464		620
465	Similar to C<prio>, but subtract the given value from the priority (i.e.	621	Similar to C<prio>, but subtract the given value from the priority (i.e.
466	higher values mean lower priority, just as in unix).	622	higher values mean lower priority, just as in unix).
467		623
468	=item $olddesc = $coroutine->desc ($newdesc)	624	=item $olddesc = $coro->desc ($newdesc)
469		625
470	Sets (or gets in case the argument is missing) the description for this	626	Sets (or gets in case the argument is missing) the description for this
471	coroutine. This is just a free-form string you can associate with a coroutine.	627	coro. This is just a free-form string you can associate with a
		628	coro.
472		629
473	This method simply sets the C<< $coroutine->{desc} >> member to the given string. You	630	This method simply sets the C<< $coro->{desc} >> member to the given
474	can modify this member directly if you wish.	631	string. You can modify this member directly if you wish.
475		632
476	=cut	633	=cut
477		634
478	sub desc {	635	sub desc {
479	my $old = $_[0]{desc};	636	my $old = $_[0]{desc};
480	$_[0]{desc} = $_[1] if @_ > 1;	637	$_[0]{desc} = $_[1] if @_ > 1;
481	$old;	638	$old;
482	}	639	}
483		640
		641	sub transfer {
		642	require Carp;
		643	Carp::croak ("You must not call ->transfer on Coro objects. Use Coro::State objects or the ->schedule_to method. Caught");
		644	}
		645
484	=back	646	=back
485		647
486	=head2 GLOBAL FUNCTIONS	648	=head1 GLOBAL FUNCTIONS
487		649
488	=over 4	650	=over 4
489		651
490	=item Coro::nready	652	=item Coro::nready
491		653
492	Returns the number of coroutines that are currently in the ready state,	654	Returns the number of coro that are currently in the ready state,
493	i.e. that can be switched to. The value C<0> means that the only runnable	655	i.e. that can be switched to by calling C<schedule> directory or
		656	indirectly. The value C<0> means that the only runnable coro is the
494	coroutine is the currently running one, so C<cede> would have no effect,	657	currently running one, so C<cede> would have no effect, and C<schedule>
495	and C<schedule> would cause a deadlock unless there is an idle handler	658	would cause a deadlock unless there is an idle handler that wakes up some
496	that wakes up some coroutines.	659	coro.
497		660
498	=item my $guard = Coro::guard { ... }	661	=item my $guard = Coro::guard { ... }
499		662
500	This creates and returns a guard object. Nothing happens until the object	663	This function still exists, but is deprecated. Please use the
501	gets destroyed, in which case the codeblock given as argument will be	664	C<Guard::guard> function instead.
502	executed. This is useful to free locks or other resources in case of a
503	runtime error or when the coroutine gets canceled, as in both cases the
504	guard block will be executed. The guard object supports only one method,
505	C<< ->cancel >>, which will keep the codeblock from being executed.
506		665
507	Example: set some flag and clear it again when the coroutine gets canceled
508	or the function returns:
509
510	sub do_something {
511	my $guard = Coro::guard { $busy = 0 };
512	$busy = 1;
513
514	# do something that requires $busy to be true
515	}
516
517	=cut	666	=cut
518		667
519	sub guard(&) {	668	BEGIN { *guard = \&Guard::guard }
520	bless \(my $cb = $_[0]), "Coro::guard"
521	}
522
523	sub Coro::guard::cancel {
524	${$_[0]} = sub { };
525	}
526
527	sub Coro::guard::DESTROY {
528	${$_[0]}->();
529	}
530
531		669
532	=item unblock_sub { ... }	670	=item unblock_sub { ... }
533		671
534	This utility function takes a BLOCK or code reference and "unblocks" it,	672	This utility function takes a BLOCK or code reference and "unblocks" it,
535	returning the new coderef. This means that the new coderef will return	673	returning a new coderef. Unblocking means that calling the new coderef
536	immediately without blocking, returning nothing, while the original code	674	will return immediately without blocking, returning nothing, while the
537	ref will be called (with parameters) from within its own coroutine.	675	original code ref will be called (with parameters) from within another
		676	coro.
538		677
539	The reason this function exists is that many event libraries (such as the	678	The reason this function exists is that many event libraries (such as the
540	venerable L<Event\|Event> module) are not coroutine-safe (a weaker form	679	venerable L<Event\|Event> module) are not thread-safe (a weaker form
541	of thread-safety). This means you must not block within event callbacks,	680	of reentrancy). This means you must not block within event callbacks,
542	otherwise you might suffer from crashes or worse.	681	otherwise you might suffer from crashes or worse. The only event library
		682	currently known that is safe to use without C<unblock_sub> is L<EV>.
543		683
544	This function allows your callbacks to block by executing them in another	684	This function allows your callbacks to block by executing them in another
545	coroutine where it is safe to block. One example where blocking is handy	685	coro where it is safe to block. One example where blocking is handy
546	is when you use the L<Coro::AIO\|Coro::AIO> functions to save results to	686	is when you use the L<Coro::AIO\|Coro::AIO> functions to save results to
547	disk.	687	disk, for example.
548		688
549	In short: simply use C<unblock_sub { ... }> instead of C<sub { ... }> when	689	In short: simply use C<unblock_sub { ... }> instead of C<sub { ... }> when
550	creating event callbacks that want to block.	690	creating event callbacks that want to block.
		691
		692	If your handler does not plan to block (e.g. simply sends a message to
		693	another coro, or puts some other coro into the ready queue), there is
		694	no reason to use C<unblock_sub>.
		695
		696	Note that you also need to use C<unblock_sub> for any other callbacks that
		697	are indirectly executed by any C-based event loop. For example, when you
		698	use a module that uses L<AnyEvent> (and you use L<Coro::AnyEvent>) and it
		699	provides callbacks that are the result of some event callback, then you
		700	must not block either, or use C<unblock_sub>.
551		701
552	=cut	702	=cut
553		703
554	our @unblock_queue;	704	our @unblock_queue;
555		705
…		…
558	# return immediately and can be reused) and because we cannot cede	708	# return immediately and can be reused) and because we cannot cede
559	# inside an event callback.	709	# inside an event callback.
560	our $unblock_scheduler = new Coro sub {	710	our $unblock_scheduler = new Coro sub {
561	while () {	711	while () {
562	while (my $cb = pop @unblock_queue) {	712	while (my $cb = pop @unblock_queue) {
563	# this is an inlined copy of async_pool	713	&async_pool (@$cb);
564	my $coro = (pop @async_pool) \|\| new Coro \&pool_handler;
565		714
566	$coro->{_invoke} = $cb;
567	$coro->ready;
568	cede; # for short-lived callbacks, this reduces pressure on the coro pool	715	# for short-lived callbacks, this reduces pressure on the coro pool
		716	# as the chance is very high that the async_poll coro will be back
		717	# in the idle state when cede returns
		718	cede;
569	}	719	}
570	schedule; # sleep well	720	schedule; # sleep well
571	}	721	}
572	};	722	};
573	$unblock_scheduler->desc ("[unblock_sub scheduler]");	723	$unblock_scheduler->{desc} = "[unblock_sub scheduler]";
574		724
575	sub unblock_sub(&) {	725	sub unblock_sub(&) {
576	my $cb = shift;	726	my $cb = shift;
577		727
578	sub {	728	sub {
579	unshift @unblock_queue, [$cb, @_];	729	unshift @unblock_queue, [$cb, @_];
580	$unblock_scheduler->ready;	730	$unblock_scheduler->ready;
581	}	731	}
582	}	732	}
583		733
		734	=item $cb = Coro::rouse_cb
		735
		736	Create and return a "rouse callback". That's a code reference that,
		737	when called, will remember a copy of its arguments and notify the owner
		738	coro of the callback.
		739
		740	See the next function.
		741
		742	=item @args = Coro::rouse_wait [$cb]
		743
		744	Wait for the specified rouse callback (or the last one that was created in
		745	this coro).
		746
		747	As soon as the callback is invoked (or when the callback was invoked
		748	before C<rouse_wait>), it will return the arguments originally passed to
		749	the rouse callback. In scalar context, that means you get the I<last>
		750	argument, just as if C<rouse_wait> had a C<return ($a1, $a2, $a3...)>
		751	statement at the end.
		752
		753	See the section B<HOW TO WAIT FOR A CALLBACK> for an actual usage example.
		754
584	=back	755	=back
585		756
586	=cut	757	=cut
587		758
588	1;	759	1;
589		760
		761	=head1 HOW TO WAIT FOR A CALLBACK
		762
		763	It is very common for a coro to wait for some callback to be
		764	called. This occurs naturally when you use coro in an otherwise
		765	event-based program, or when you use event-based libraries.
		766
		767	These typically register a callback for some event, and call that callback
		768	when the event occured. In a coro, however, you typically want to
		769	just wait for the event, simplyifying things.
		770
		771	For example C<< AnyEvent->child >> registers a callback to be called when
		772	a specific child has exited:
		773
		774	my $child_watcher = AnyEvent->child (pid => $pid, cb => sub { ... });
		775
		776	But from within a coro, you often just want to write this:
		777
		778	my $status = wait_for_child $pid;
		779
		780	Coro offers two functions specifically designed to make this easy,
		781	C<Coro::rouse_cb> and C<Coro::rouse_wait>.
		782
		783	The first function, C<rouse_cb>, generates and returns a callback that,
		784	when invoked, will save its arguments and notify the coro that
		785	created the callback.
		786
		787	The second function, C<rouse_wait>, waits for the callback to be called
		788	(by calling C<schedule> to go to sleep) and returns the arguments
		789	originally passed to the callback.
		790
		791	Using these functions, it becomes easy to write the C<wait_for_child>
		792	function mentioned above:
		793
		794	sub wait_for_child($) {
		795	my ($pid) = @_;
		796
		797	my $watcher = AnyEvent->child (pid => $pid, cb => Coro::rouse_cb);
		798
		799	my ($rpid, $rstatus) = Coro::rouse_wait;
		800	$rstatus
		801	}
		802
		803	In the case where C<rouse_cb> and C<rouse_wait> are not flexible enough,
		804	you can roll your own, using C<schedule>:
		805
		806	sub wait_for_child($) {
		807	my ($pid) = @_;
		808
		809	# store the current coro in $current,
		810	# and provide result variables for the closure passed to ->child
		811	my $current = $Coro::current;
		812	my ($done, $rstatus);
		813
		814	# pass a closure to ->child
		815	my $watcher = AnyEvent->child (pid => $pid, cb => sub {
		816	$rstatus = $_[1]; # remember rstatus
		817	$done = 1; # mark $rstatus as valud
		818	});
		819
		820	# wait until the closure has been called
		821	schedule while !$done;
		822
		823	$rstatus
		824	}
		825
		826
590	=head1 BUGS/LIMITATIONS	827	=head1 BUGS/LIMITATIONS
591		828
592	- you must make very sure that no coro is still active on global	829	=over 4
593	destruction. very bad things might happen otherwise (usually segfaults).
594		830
		831	=item fork with pthread backend
		832
		833	When Coro is compiled using the pthread backend (which isn't recommended
		834	but required on many BSDs as their libcs are completely broken), then
		835	coro will not survive a fork. There is no known workaround except to
		836	fix your libc and use a saner backend.
		837
		838	=item perl process emulation ("threads")
		839
595	- this module is not thread-safe. You should only ever use this module	840	This module is not perl-pseudo-thread-safe. You should only ever use this
596	from the same thread (this requirement might be loosened in the future	841	module from the first thread (this requirement might be removed in the
597	to allow per-thread schedulers, but Coro::State does not yet allow	842	future to allow per-thread schedulers, but Coro::State does not yet allow
598	this).	843	this). I recommend disabling thread support and using processes, as having
		844	the windows process emulation enabled under unix roughly halves perl
		845	performance, even when not used.
		846
		847	=item coro switching is not signal safe
		848
		849	You must not switch to another coro from within a signal handler
		850	(only relevant with %SIG - most event libraries provide safe signals).
		851
		852	That means you I<MUST NOT> call any function that might "block" the
		853	current coro - C<cede>, C<schedule> C<< Coro::Semaphore->down >> or
		854	anything that calls those. Everything else, including calling C<ready>,
		855	works.
		856
		857	=back
		858
		859
		860	=head1 WINDOWS PROCESS EMULATION
		861
		862	A great many people seem to be confused about ithreads (for example, Chip
		863	Salzenberg called me unintelligent, incapable, stupid and gullible,
		864	while in the same mail making rather confused statements about perl
		865	ithreads (for example, that memory or files would be shared), showing his
		866	lack of understanding of this area - if it is hard to understand for Chip,
		867	it is probably not obvious to everybody).
		868
		869	What follows is an ultra-condensed version of my talk about threads in
		870	scripting languages given onthe perl workshop 2009:
		871
		872	The so-called "ithreads" were originally implemented for two reasons:
		873	first, to (badly) emulate unix processes on native win32 perls, and
		874	secondly, to replace the older, real thread model ("5.005-threads").
		875
		876	It does that by using threads instead of OS processes. The difference
		877	between processes and threads is that threads share memory (and other
		878	state, such as files) between threads within a single process, while
		879	processes do not share anything (at least not semantically). That
		880	means that modifications done by one thread are seen by others, while
		881	modifications by one process are not seen by other processes.
		882
		883	The "ithreads" work exactly like that: when creating a new ithreads
		884	process, all state is copied (memory is copied physically, files and code
		885	is copied logically). Afterwards, it isolates all modifications. On UNIX,
		886	the same behaviour can be achieved by using operating system processes,
		887	except that UNIX typically uses hardware built into the system to do this
		888	efficiently, while the windows process emulation emulates this hardware in
		889	software (rather efficiently, but of course it is still much slower than
		890	dedicated hardware).
		891
		892	As mentioned before, loading code, modifying code, modifying data
		893	structures and so on is only visible in the ithreads process doing the
		894	modification, not in other ithread processes within the same OS process.
		895
		896	This is why "ithreads" do not implement threads for perl at all, only
		897	processes. What makes it so bad is that on non-windows platforms, you can
		898	actually take advantage of custom hardware for this purpose (as evidenced
		899	by the forks module, which gives you the (i-) threads API, just much
		900	faster).
		901
		902	Sharing data is in the i-threads model is done by transfering data
		903	structures between threads using copying semantics, which is very slow -
		904	shared data simply does not exist. Benchmarks using i-threads which are
		905	communication-intensive show extremely bad behaviour with i-threads (in
		906	fact, so bad that Coro, which cannot take direct advantage of multiple
		907	CPUs, is often orders of magnitude faster because it shares data using
		908	real threads, refer to my talk for details).
		909
		910	As summary, i-threads use threads to implement processes, while
		911	the compatible forks module uses processes to emulate, uhm,
		912	processes. I-threads slow down every perl program when enabled, and
		913	outside of windows, serve no (or little) practical purpose, but
		914	disadvantages every single-threaded Perl program.
		915
		916	This is the reason that I try to avoid the name "ithreads", as it is
		917	misleading as it implies that it implements some kind of thread model for
		918	perl, and prefer the name "windows process emulation", which describes the
		919	actual use and behaviour of it much better.
599		920
600	=head1 SEE ALSO	921	=head1 SEE ALSO
601		922
		923	Event-Loop integration: L<Coro::AnyEvent>, L<Coro::EV>, L<Coro::Event>.
		924
		925	Debugging: L<Coro::Debug>.
		926
602	Support/Utility: L<Coro::Specific>, L<Coro::State>, L<Coro::Util>.	927	Support/Utility: L<Coro::Specific>, L<Coro::Util>.
603		928
604	Locking/IPC: L<Coro::Signal>, L<Coro::Channel>, L<Coro::Semaphore>, L<Coro::SemaphoreSet>, L<Coro::RWLock>.	929	Locking and IPC: L<Coro::Signal>, L<Coro::Channel>, L<Coro::Semaphore>,
		930	L<Coro::SemaphoreSet>, L<Coro::RWLock>.
605		931
606	Event/IO: L<Coro::Timer>, L<Coro::Event>, L<Coro::Handle>, L<Coro::Socket>, L<Coro::Select>.	932	I/O and Timers: L<Coro::Timer>, L<Coro::Handle>, L<Coro::Socket>, L<Coro::AIO>.
607		933
608	Embedding: L<Coro:MakeMaker>	934	Compatibility with other modules: L<Coro::LWP> (but see also L<AnyEvent::HTTP> for
		935	a better-working alternative), L<Coro::BDB>, L<Coro::Storable>,
		936	L<Coro::Select>.
		937
		938	XS API: L<Coro::MakeMaker>.
		939
		940	Low level Configuration, Thread Environment, Continuations: L<Coro::State>.
609		941
610	=head1 AUTHOR	942	=head1 AUTHOR
611		943
612	Marc Lehmann <schmorp@schmorp.de>	944	Marc Lehmann <schmorp@schmorp.de>
613	http://home.schmorp.de/	945	http://home.schmorp.de/

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing Coro/Coro.pm (file contents): Revision 1.148 by root, Fri Oct 5 20:11:25 2007 UTC vs. Revision 1.268 by root, Thu Oct 1 23:16:27 2009 UTC

Diff Legend

Comparing Coro/Coro.pm (file contents):
Revision 1.148 by root, Fri Oct 5 20:11:25 2007 UTC vs.
Revision 1.268 by root, Thu Oct 1 23:16:27 2009 UTC