[ViewVC] Diff of: cvs/Coro/Coro.pm

Comparing Coro/Coro.pm (file contents):
Revision 1.266 by root, Wed Aug 26 07:41:07 2009 UTC vs.
Revision 1.346 by root, Fri Jul 14 23:20:07 2017 UTC

…		…
16	cede; # yield to coro	16	cede; # yield to coro
17	print "3\n";	17	print "3\n";
18	cede; # and again	18	cede; # and again
19		19
20	# use locking	20	# use locking
21	use Coro::Semaphore;
22	my $lock = new Coro::Semaphore;	21	my $lock = new Coro::Semaphore;
23	my $locked;	22	my $locked;
24		23
25	$lock->down;	24	$lock->down;
26	$locked = 1;	25	$locked = 1;
…		…
40	points in your program, so locking and parallel access are rarely an	39	points in your program, so locking and parallel access are rarely an
41	issue, making thread programming much safer and easier than using other	40	issue, making thread programming much safer and easier than using other
42	thread models.	41	thread models.
43		42
44	Unlike the so-called "Perl threads" (which are not actually real threads	43	Unlike the so-called "Perl threads" (which are not actually real threads
45	but only the windows process emulation (see section of same name for more	44	but only the windows process emulation (see section of same name for
46	details) ported to unix, and as such act as processes), Coro provides	45	more details) ported to UNIX, and as such act as processes), Coro
47	a full shared address space, which makes communication between threads	46	provides a full shared address space, which makes communication between
48	very easy. And Coro's threads are fast, too: disabling the Windows	47	threads very easy. And coro threads are fast, too: disabling the Windows
49	process emulation code in your perl and using Coro can easily result in	48	process emulation code in your perl and using Coro can easily result in
50	a two to four times speed increase for your programs. A parallel matrix	49	a two to four times speed increase for your programs. A parallel matrix
51	multiplication benchmark runs over 300 times faster on a single core than	50	multiplication benchmark (very communication-intensive) runs over 300
52	perl's pseudo-threads on a quad core using all four cores.	51	times faster on a single core than perls pseudo-threads on a quad core
		52	using all four cores.
53		53
54	Coro achieves that by supporting multiple running interpreters that share	54	Coro achieves that by supporting multiple running interpreters that share
55	data, which is especially useful to code pseudo-parallel processes and	55	data, which is especially useful to code pseudo-parallel processes and
56	for event-based programming, such as multiple HTTP-GET requests running	56	for event-based programming, such as multiple HTTP-GET requests running
57	concurrently. See L<Coro::AnyEvent> to learn more on how to integrate Coro	57	concurrently. See L<Coro::AnyEvent> to learn more on how to integrate Coro
…		…
63	variables (see L<Coro::State> for more configuration and background info).	63	variables (see L<Coro::State> for more configuration and background info).
64		64
65	See also the C<SEE ALSO> section at the end of this document - the Coro	65	See also the C<SEE ALSO> section at the end of this document - the Coro
66	module family is quite large.	66	module family is quite large.
67		67
		68	=head1 CORO THREAD LIFE CYCLE
		69
		70	During the long and exciting (or not) life of a coro thread, it goes
		71	through a number of states:
		72
		73	=over 4
		74
		75	=item 1. Creation
		76
		77	The first thing in the life of a coro thread is it's creation -
		78	obviously. The typical way to create a thread is to call the C<async
		79	BLOCK> function:
		80
		81	async {
		82	# thread code goes here
		83	};
		84
		85	You can also pass arguments, which are put in C<@_>:
		86
		87	async {
		88	print $_[1]; # prints 2
		89	} 1, 2, 3;
		90
		91	This creates a new coro thread and puts it into the ready queue, meaning
		92	it will run as soon as the CPU is free for it.
		93
		94	C<async> will return a Coro object - you can store this for future
		95	reference or ignore it - a thread that is running, ready to run or waiting
		96	for some event is alive on it's own.
		97
		98	Another way to create a thread is to call the C<new> constructor with a
		99	code-reference:
		100
		101	new Coro sub {
		102	# thread code goes here
		103	}, @optional_arguments;
		104
		105	This is quite similar to calling C<async>, but the important difference is
		106	that the new thread is not put into the ready queue, so the thread will
		107	not run until somebody puts it there. C<async> is, therefore, identical to
		108	this sequence:
		109
		110	my $coro = new Coro sub {
		111	# thread code goes here
		112	};
		113	$coro->ready;
		114	return $coro;
		115
		116	=item 2. Startup
		117
		118	When a new coro thread is created, only a copy of the code reference
		119	and the arguments are stored, no extra memory for stacks and so on is
		120	allocated, keeping the coro thread in a low-memory state.
		121
		122	Only when it actually starts executing will all the resources be finally
		123	allocated.
		124
		125	The optional arguments specified at coro creation are available in C<@_>,
		126	similar to function calls.
		127
		128	=item 3. Running / Blocking
		129
		130	A lot can happen after the coro thread has started running. Quite usually,
		131	it will not run to the end in one go (because you could use a function
		132	instead), but it will give up the CPU regularly because it waits for
		133	external events.
		134
		135	As long as a coro thread runs, its Coro object is available in the global
		136	variable C<$Coro::current>.
		137
		138	The low-level way to give up the CPU is to call the scheduler, which
		139	selects a new coro thread to run:
		140
		141	Coro::schedule;
		142
		143	Since running threads are not in the ready queue, calling the scheduler
		144	without doing anything else will block the coro thread forever - you need
		145	to arrange either for the coro to put woken up (readied) by some other
		146	event or some other thread, or you can put it into the ready queue before
		147	scheduling:
		148
		149	# this is exactly what Coro::cede does
		150	$Coro::current->ready;
		151	Coro::schedule;
		152
		153	All the higher-level synchronisation methods (Coro::Semaphore,
		154	Coro::rouse_*...) are actually implemented via C<< ->ready >> and C<<
		155	Coro::schedule >>.
		156
		157	While the coro thread is running it also might get assigned a C-level
		158	thread, or the C-level thread might be unassigned from it, as the Coro
		159	runtime wishes. A C-level thread needs to be assigned when your perl
		160	thread calls into some C-level function and that function in turn calls
		161	perl and perl then wants to switch coroutines. This happens most often
		162	when you run an event loop and block in the callback, or when perl
		163	itself calls some function such as C<AUTOLOAD> or methods via the C<tie>
		164	mechanism.
		165
		166	=item 4. Termination
		167
		168	Many threads actually terminate after some time. There are a number of
		169	ways to terminate a coro thread, the simplest is returning from the
		170	top-level code reference:
		171
		172	async {
		173	# after returning from here, the coro thread is terminated
		174	};
		175
		176	async {
		177	return if 0.5 < rand; # terminate a little earlier, maybe
		178	print "got a chance to print this\n";
		179	# or here
		180	};
		181
		182	Any values returned from the coroutine can be recovered using C<< ->join
		183	>>:
		184
		185	my $coro = async {
		186	"hello, world\n" # return a string
		187	};
		188
		189	my $hello_world = $coro->join;
		190
		191	print $hello_world;
		192
		193	Another way to terminate is to call C<< Coro::terminate >>, which at any
		194	subroutine call nesting level:
		195
		196	async {
		197	Coro::terminate "return value 1", "return value 2";
		198	};
		199
		200	Yet another way is to C<< ->cancel >> (or C<< ->safe_cancel >>) the coro
		201	thread from another thread:
		202
		203	my $coro = async {
		204	exit 1;
		205	};
		206
		207	$coro->cancel; # also accepts values for ->join to retrieve
		208
		209	Cancellation I<can> be dangerous - it's a bit like calling C<exit> without
		210	actually exiting, and might leave C libraries and XS modules in a weird
		211	state. Unlike other thread implementations, however, Coro is exceptionally
		212	safe with regards to cancellation, as perl will always be in a consistent
		213	state, and for those cases where you want to do truly marvellous things
		214	with your coro while it is being cancelled - that is, make sure all
		215	cleanup code is executed from the thread being cancelled - there is even a
		216	C<< ->safe_cancel >> method.
		217
		218	So, cancelling a thread that runs in an XS event loop might not be the
		219	best idea, but any other combination that deals with perl only (cancelling
		220	when a thread is in a C<tie> method or an C<AUTOLOAD> for example) is
		221	safe.
		222
		223	Last not least, a coro thread object that isn't referenced is C<<
		224	->cancel >>'ed automatically - just like other objects in Perl. This
		225	is not such a common case, however - a running thread is referencedy by
		226	C<$Coro::current>, a thread ready to run is referenced by the ready queue,
		227	a thread waiting on a lock or semaphore is referenced by being in some
		228	wait list and so on. But a thread that isn't in any of those queues gets
		229	cancelled:
		230
		231	async {
		232	schedule; # cede to other coros, don't go into the ready queue
		233	};
		234
		235	cede;
		236	# now the async above is destroyed, as it is not referenced by anything.
		237
		238	A slightly embellished example might make it clearer:
		239
		240	async {
		241	my $guard = Guard::guard { print "destroyed\n" };
		242	schedule while 1;
		243	};
		244
		245	cede;
		246
		247	Superficially one might not expect any output - since the C<async>
		248	implements an endless loop, the C<$guard> will not be cleaned up. However,
		249	since the thread object returned by C<async> is not stored anywhere, the
		250	thread is initially referenced because it is in the ready queue, when it
		251	runs it is referenced by C<$Coro::current>, but when it calls C<schedule>,
		252	it gets C<cancel>ed causing the guard object to be destroyed (see the next
		253	section), and printing it's message.
		254
		255	If this seems a bit drastic, remember that this only happens when nothing
		256	references the thread anymore, which means there is no way to further
		257	execute it, ever. The only options at this point are leaking the thread,
		258	or cleaning it up, which brings us to...
		259
		260	=item 5. Cleanup
		261
		262	Threads will allocate various resources. Most but not all will be returned
		263	when a thread terminates, during clean-up.
		264
		265	Cleanup is quite similar to throwing an uncaught exception: perl will
		266	work it's way up through all subroutine calls and blocks. On it's way, it
		267	will release all C<my> variables, undo all C<local>'s and free any other
		268	resources truly local to the thread.
		269
		270	So, a common way to free resources is to keep them referenced only by my
		271	variables:
		272
		273	async {
		274	my $big_cache = new Cache ...;
		275	};
		276
		277	If there are no other references, then the C<$big_cache> object will be
		278	freed when the thread terminates, regardless of how it does so.
		279
		280	What it does C<NOT> do is unlock any Coro::Semaphores or similar
		281	resources, but that's where the C<guard> methods come in handy:
		282
		283	my $sem = new Coro::Semaphore;
		284
		285	async {
		286	my $lock_guard = $sem->guard;
		287	# if we return, or die or get cancelled, here,
		288	# then the semaphore will be "up"ed.
		289	};
		290
		291	The C<Guard::guard> function comes in handy for any custom cleanup you
		292	might want to do (but you cannot switch to other coroutines from those
		293	code blocks):
		294
		295	async {
		296	my $window = new Gtk2::Window "toplevel";
		297	# The window will not be cleaned up automatically, even when $window
		298	# gets freed, so use a guard to ensure it's destruction
		299	# in case of an error:
		300	my $window_guard = Guard::guard { $window->destroy };
		301
		302	# we are safe here
		303	};
		304
		305	Last not least, C<local> can often be handy, too, e.g. when temporarily
		306	replacing the coro thread description:
		307
		308	sub myfunction {
		309	local $Coro::current->{desc} = "inside myfunction(@_)";
		310
		311	# if we return or die here, the description will be restored
		312	}
		313
		314	=item 6. Viva La Zombie Muerte
		315
		316	Even after a thread has terminated and cleaned up its resources, the Coro
		317	object still is there and stores the return values of the thread.
		318
		319	When there are no other references, it will simply be cleaned up and
		320	freed.
		321
		322	If there areany references, the Coro object will stay around, and you
		323	can call C<< ->join >> as many times as you wish to retrieve the result
		324	values:
		325
		326	async {
		327	print "hi\n";
		328	1
		329	};
		330
		331	# run the async above, and free everything before returning
		332	# from Coro::cede:
		333	Coro::cede;
		334
		335	{
		336	my $coro = async {
		337	print "hi\n";
		338	1
		339	};
		340
		341	# run the async above, and clean up, but do not free the coro
		342	# object:
		343	Coro::cede;
		344
		345	# optionally retrieve the result values
		346	my @results = $coro->join;
		347
		348	# now $coro goes out of scope, and presumably gets freed
		349	};
		350
		351	=back
		352
68	=cut	353	=cut
69		354
70	package Coro;	355	package Coro;
71		356
72	use strict qw(vars subs);	357	use common::sense;
73	no warnings "uninitialized";	358
		359	use Carp ();
74		360
75	use Guard ();	361	use Guard ();
76		362
77	use Coro::State;	363	use Coro::State;
78		364
…		…
80		366
81	our $idle; # idle handler	367	our $idle; # idle handler
82	our $main; # main coro	368	our $main; # main coro
83	our $current; # current coro	369	our $current; # current coro
84		370
85	our $VERSION = 5.17;	371	our $VERSION = 6.513;
86		372
87	our @EXPORT = qw(async async_pool cede schedule terminate current unblock_sub);	373	our @EXPORT = qw(async async_pool cede schedule terminate current unblock_sub rouse_cb rouse_wait);
88	our %EXPORT_TAGS = (	374	our %EXPORT_TAGS = (
89	prio => [qw(PRIO_MAX PRIO_HIGH PRIO_NORMAL PRIO_LOW PRIO_IDLE PRIO_MIN)],	375	prio => [qw(PRIO_MAX PRIO_HIGH PRIO_NORMAL PRIO_LOW PRIO_IDLE PRIO_MIN)],
90	);	376	);
91	our @EXPORT_OK = (@{$EXPORT_TAGS{prio}}, qw(nready));	377	our @EXPORT_OK = (@{$EXPORT_TAGS{prio}}, qw(nready));
92		378
…		…
95	=over 4	381	=over 4
96		382
97	=item $Coro::main	383	=item $Coro::main
98		384
99	This variable stores the Coro object that represents the main	385	This variable stores the Coro object that represents the main
100	program. While you cna C<ready> it and do most other things you can do to	386	program. While you can C<ready> it and do most other things you can do to
101	coro, it is mainly useful to compare again C<$Coro::current>, to see	387	coro, it is mainly useful to compare again C<$Coro::current>, to see
102	whether you are running in the main program or not.	388	whether you are running in the main program or not.
103		389
104	=cut	390	=cut
105		391
…		…
123		409
124	This variable is mainly useful to integrate Coro into event loops. It is	410	This variable is mainly useful to integrate Coro into event loops. It is
125	usually better to rely on L<Coro::AnyEvent> or L<Coro::EV>, as this is	411	usually better to rely on L<Coro::AnyEvent> or L<Coro::EV>, as this is
126	pretty low-level functionality.	412	pretty low-level functionality.
127		413
128	This variable stores either a Coro object or a callback.	414	This variable stores a Coro object that is put into the ready queue when
		415	there are no other ready threads (without invoking any ready hooks).
129		416
130	If it is a callback, the it is called whenever the scheduler finds no	417	The default implementation dies with "FATAL: deadlock detected.", followed
131	ready coros to run. The default implementation prints "FATAL:	418	by a thread listing, because the program has no other way to continue.
132	deadlock detected" and exits, because the program has no other way to
133	continue.
134
135	If it is a coro object, then this object will be readied (without
136	invoking any ready hooks, however) when the scheduler finds no other ready
137	coros to run.
138		419
139	This hook is overwritten by modules such as C<Coro::EV> and	420	This hook is overwritten by modules such as C<Coro::EV> and
140	C<Coro::AnyEvent> to wait on an external event that hopefully wake up a	421	C<Coro::AnyEvent> to wait on an external event that hopefully wakes up a
141	coro so the scheduler can run it.	422	coro so the scheduler can run it.
142		423
143	Note that the callback I<must not>, under any circumstances, block
144	the current coro. Normally, this is achieved by having an "idle
145	coro" that calls the event loop and then blocks again, and then
146	readying that coro in the idle handler, or by simply placing the idle
147	coro in this variable.
148
149	See L<Coro::Event> or L<Coro::AnyEvent> for examples of using this	424	See L<Coro::EV> or L<Coro::AnyEvent> for examples of using this technique.
150	technique.
151
152	Please note that if your callback recursively invokes perl (e.g. for event
153	handlers), then it must be prepared to be called recursively itself.
154		425
155	=cut	426	=cut
156		427
157	$idle = sub {	428	# \|\|= because other modules could have provided their own by now
158	require Carp;	429	$idle \|\|= new Coro sub {
159	Carp::croak ("FATAL: deadlock detected");	430	require Coro::Debug;
		431	die "FATAL: deadlock detected.\n"
		432	. Coro::Debug::ps_listing ();
160	};	433	};
161		434
162	# this coro is necessary because a coro	435	# this coro is necessary because a coro
163	# cannot destroy itself.	436	# cannot destroy itself.
164	our @destroy;	437	our @destroy;
165	our $manager;	438	our $manager;
166		439
167	$manager = new Coro sub {	440	$manager = new Coro sub {
168	while () {	441	while () {
169	Coro::State::cancel shift @destroy	442	_destroy shift @destroy
170	while @destroy;	443	while @destroy;
171		444
172	&schedule;	445	&schedule;
173	}	446	}
174	};	447	};
…		…
225	C<async> does. As the coro is being reused, stuff like C<on_destroy>	498	C<async> does. As the coro is being reused, stuff like C<on_destroy>
226	will not work in the expected way, unless you call terminate or cancel,	499	will not work in the expected way, unless you call terminate or cancel,
227	which somehow defeats the purpose of pooling (but is fine in the	500	which somehow defeats the purpose of pooling (but is fine in the
228	exceptional case).	501	exceptional case).
229		502
230	The priority will be reset to C<0> after each run, tracing will be	503	The priority will be reset to C<0> after each run, all C<swap_sv> calls
231	disabled, the description will be reset and the default output filehandle	504	will be undone, tracing will be disabled, the description will be reset
232	gets restored, so you can change all these. Otherwise the coro will	505	and the default output filehandle gets restored, so you can change all
233	be re-used "as-is": most notably if you change other per-coro global	506	these. Otherwise the coro will be re-used "as-is": most notably if you
234	stuff such as C<$/> you I<must needs> revert that change, which is most	507	change other per-coro global stuff such as C<$/> you I<must needs> revert
235	simply done by using local as in: C<< local $/ >>.	508	that change, which is most simply done by using local as in: C<< local $/
		509	>>.
236		510
237	The idle pool size is limited to C<8> idle coros (this can be	511	The idle pool size is limited to C<8> idle coros (this can be
238	adjusted by changing $Coro::POOL_SIZE), but there can be as many non-idle	512	adjusted by changing $Coro::POOL_SIZE), but there can be as many non-idle
239	coros as required.	513	coros as required.
240		514
…		…
272	=item schedule	546	=item schedule
273		547
274	Calls the scheduler. The scheduler will find the next coro that is	548	Calls the scheduler. The scheduler will find the next coro that is
275	to be run from the ready queue and switches to it. The next coro	549	to be run from the ready queue and switches to it. The next coro
276	to be run is simply the one with the highest priority that is longest	550	to be run is simply the one with the highest priority that is longest
277	in its ready queue. If there is no coro ready, it will clal the	551	in its ready queue. If there is no coro ready, it will call the
278	C<$Coro::idle> hook.	552	C<$Coro::idle> hook.
279		553
280	Please note that the current coro will I<not> be put into the ready	554	Please note that the current coro will I<not> be put into the ready
281	queue, so calling this function usually means you will never be called	555	queue, so calling this function usually means you will never be called
282	again unless something else (e.g. an event handler) calls C<< ->ready >>,	556	again unless something else (e.g. an event handler) calls C<< ->ready >>,
…		…
308	coro, regardless of priority. This is useful sometimes to ensure	582	coro, regardless of priority. This is useful sometimes to ensure
309	progress is made.	583	progress is made.
310		584
311	=item terminate [arg...]	585	=item terminate [arg...]
312		586
313	Terminates the current coro with the given status values (see L<cancel>).	587	Terminates the current coro with the given status values (see
		588	L<cancel>). The values will not be copied, but referenced directly.
314		589
315	=item Coro::on_enter BLOCK, Coro::on_leave BLOCK	590	=item Coro::on_enter BLOCK, Coro::on_leave BLOCK
316		591
317	These function install enter and leave winders in the current scope. The	592	These function install enter and leave winders in the current scope. The
318	enter block will be executed when on_enter is called and whenever the	593	enter block will be executed when on_enter is called and whenever the
…		…
363	# at this place, the timezone is Antarctica/South_Pole,	638	# at this place, the timezone is Antarctica/South_Pole,
364	# without disturbing the TZ of any other coro.	639	# without disturbing the TZ of any other coro.
365	};	640	};
366		641
367	This can be used to localise about any resource (locale, uid, current	642	This can be used to localise about any resource (locale, uid, current
368	working directory etc.) to a block, despite the existance of other	643	working directory etc.) to a block, despite the existence of other
369	coros.	644	coros.
370		645
371	Another interesting example implements time-sliced multitasking using	646	Another interesting example implements time-sliced multitasking using
372	interval timers (this could obviously be optimised, but does the job):	647	interval timers (this could obviously be optimised, but does the job):
373		648
…		…
378	Coro::on_enter {	653	Coro::on_enter {
379	# on entering the thread, we set an VTALRM handler to cede	654	# on entering the thread, we set an VTALRM handler to cede
380	$SIG{VTALRM} = sub { cede };	655	$SIG{VTALRM} = sub { cede };
381	# and then start the interval timer	656	# and then start the interval timer
382	Time::HiRes::setitimer &Time::HiRes::ITIMER_VIRTUAL, 0.01, 0.01;	657	Time::HiRes::setitimer &Time::HiRes::ITIMER_VIRTUAL, 0.01, 0.01;
383	};	658	};
384	Coro::on_leave {	659	Coro::on_leave {
385	# on leaving the thread, we stop the interval timer again	660	# on leaving the thread, we stop the interval timer again
386	Time::HiRes::setitimer &Time::HiRes::ITIMER_VIRTUAL, 0, 0;	661	Time::HiRes::setitimer &Time::HiRes::ITIMER_VIRTUAL, 0, 0;
387	};	662	};
388		663
389	&{+shift};	664	&{+shift};
390	}	665	}
391		666
392	# use like this:	667	# use like this:
393	timeslice {	668	timeslice {
394	# The following is an endless loop that would normally	669	# The following is an endless loop that would normally
395	# monopolise the process. Since it runs in a timesliced	670	# monopolise the process. Since it runs in a timesliced
396	# environment, it will regularly cede to other threads.	671	# environment, it will regularly cede to other threads.
397	while () { }	672	while () { }
398	};	673	};
399		674
400		675
401	=item killall	676	=item killall
402		677
403	Kills/terminates/cancels all coros except the currently running one.	678	Kills/terminates/cancels all coros except the currently running one.
…		…
474	To avoid this, it is best to put a suspended coro into the ready queue	749	To avoid this, it is best to put a suspended coro into the ready queue
475	unconditionally, as every synchronisation mechanism must protect itself	750	unconditionally, as every synchronisation mechanism must protect itself
476	against spurious wakeups, and the one in the Coro family certainly do	751	against spurious wakeups, and the one in the Coro family certainly do
477	that.	752	that.
478		753
		754	=item $state->is_new
		755
		756	Returns true iff this Coro object is "new", i.e. has never been run
		757	yet. Those states basically consist of only the code reference to call and
		758	the arguments, but consumes very little other resources. New states will
		759	automatically get assigned a perl interpreter when they are transferred to.
		760
		761	=item $state->is_zombie
		762
		763	Returns true iff the Coro object has been cancelled, i.e.
		764	it's resources freed because they were C<cancel>'ed, C<terminate>'d,
		765	C<safe_cancel>'ed or simply went out of scope.
		766
		767	The name "zombie" stems from UNIX culture, where a process that has
		768	exited and only stores and exit status and no other resources is called a
		769	"zombie".
		770
479	=item $is_ready = $coro->is_ready	771	=item $is_ready = $coro->is_ready
480		772
481	Returns true iff the Coro object is in the ready queue. Unless the Coro	773	Returns true iff the Coro object is in the ready queue. Unless the Coro
482	object gets destroyed, it will eventually be scheduled by the scheduler.	774	object gets destroyed, it will eventually be scheduled by the scheduler.
483		775
…		…
492	Returns true iff this Coro object has been suspended. Suspended Coros will	784	Returns true iff this Coro object has been suspended. Suspended Coros will
493	not ever be scheduled.	785	not ever be scheduled.
494		786
495	=item $coro->cancel (arg...)	787	=item $coro->cancel (arg...)
496		788
497	Terminates the given Coro and makes it return the given arguments as	789	Terminates the given Coro thread and makes it return the given arguments as
498	status (default: the empty list). Never returns if the Coro is the	790	status (default: an empty list). Never returns if the Coro is the
499	current Coro.	791	current Coro.
500		792
501	=cut	793	This is a rather brutal way to free a coro, with some limitations - if
		794	the thread is inside a C callback that doesn't expect to be canceled,
		795	bad things can happen, or if the cancelled thread insists on running
		796	complicated cleanup handlers that rely on its thread context, things will
		797	not work.
502		798
503	sub cancel {	799	Any cleanup code being run (e.g. from C<guard> blocks, destructors and so
504	my $self = shift;	800	on) will be run without a thread context, and is not allowed to switch
		801	to other threads. A common mistake is to call C<< ->cancel >> from a
		802	destructor called by die'ing inside the thread to be cancelled for
		803	example.
505		804
506	if ($current == $self) {	805	On the plus side, C<< ->cancel >> will always clean up the thread, no
507	terminate @_;	806	matter what. If your cleanup code is complex or you want to avoid
508	} else {	807	cancelling a C-thread that doesn't know how to clean up itself, it can be
509	$self->{_status} = [@_];	808	better to C<< ->throw >> an exception, or use C<< ->safe_cancel >>.
510	Coro::State::cancel $self;	809
		810	The arguments to C<< ->cancel >> are not copied, but instead will
		811	be referenced directly (e.g. if you pass C<$var> and after the call
		812	change that variable, then you might change the return values passed to
		813	e.g. C<join>, so don't do that).
		814
		815	The resources of the Coro are usually freed (or destructed) before this
		816	call returns, but this can be delayed for an indefinite amount of time, as
		817	in some cases the manager thread has to run first to actually destruct the
		818	Coro object.
		819
		820	=item $coro->safe_cancel ($arg...)
		821
		822	Works mostly like C<< ->cancel >>, but is inherently "safer", and
		823	consequently, can fail with an exception in cases the thread is not in a
		824	cancellable state. Essentially, C<< ->safe_cancel >> is a C<< ->cancel >>
		825	with extra checks before canceling.
		826
		827	It works a bit like throwing an exception that cannot be caught -
		828	specifically, it will clean up the thread from within itself, so all
		829	cleanup handlers (e.g. C<guard> blocks) are run with full thread
		830	context and can block if they wish. The downside is that there is no
		831	guarantee that the thread can be cancelled when you call this method, and
		832	therefore, it might fail. It is also considerably slower than C<cancel> or
		833	C<terminate>.
		834
		835	A thread is in a safe-cancellable state if it either hasn't been run yet,
		836	or it has no C context attached and is inside an SLF function.
		837
		838	The latter two basically mean that the thread isn't currently inside a
		839	perl callback called from some C function (usually via some XS modules)
		840	and isn't currently executing inside some C function itself (via Coro's XS
		841	API).
		842
		843	This call returns true when it could cancel the thread, or croaks with an
		844	error otherwise (i.e. it either returns true or doesn't return at all).
		845
		846	Why the weird interface? Well, there are two common models on how and
		847	when to cancel things. In the first, you have the expectation that your
		848	coro thread can be cancelled when you want to cancel it - if the thread
		849	isn't cancellable, this would be a bug somewhere, so C<< ->safe_cancel >>
		850	croaks to notify of the bug.
		851
		852	In the second model you sometimes want to ask nicely to cancel a thread,
		853	but if it's not a good time, well, then don't cancel. This can be done
		854	relatively easy like this:
		855
		856	if (! eval { $coro->safe_cancel }) {
		857	warn "unable to cancel thread: $@";
511	}	858	}
512	}	859
		860	However, what you never should do is first try to cancel "safely" and
		861	if that fails, cancel the "hard" way with C<< ->cancel >>. That makes
		862	no sense: either you rely on being able to execute cleanup code in your
		863	thread context, or you don't. If you do, then C<< ->safe_cancel >> is the
		864	only way, and if you don't, then C<< ->cancel >> is always faster and more
		865	direct.
513		866
514	=item $coro->schedule_to	867	=item $coro->schedule_to
515		868
516	Puts the current coro to sleep (like C<Coro::schedule>), but instead	869	Puts the current coro to sleep (like C<Coro::schedule>), but instead
517	of continuing with the next coro from the ready queue, always switch to	870	of continuing with the next coro from the ready queue, always switch to
…		…
536	inside the coro at the next convenient point in time. Otherwise	889	inside the coro at the next convenient point in time. Otherwise
537	clears the exception object.	890	clears the exception object.
538		891
539	Coro will check for the exception each time a schedule-like-function	892	Coro will check for the exception each time a schedule-like-function
540	returns, i.e. after each C<schedule>, C<cede>, C<< Coro::Semaphore->down	893	returns, i.e. after each C<schedule>, C<cede>, C<< Coro::Semaphore->down
541	>>, C<< Coro::Handle->readable >> and so on. Most of these functions	894	>>, C<< Coro::Handle->readable >> and so on. Most of those functions (all
542	detect this case and return early in case an exception is pending.	895	that are part of Coro itself) detect this case and return early in case an
		896	exception is pending.
543		897
544	The exception object will be thrown "as is" with the specified scalar in	898	The exception object will be thrown "as is" with the specified scalar in
545	C<$@>, i.e. if it is a string, no line number or newline will be appended	899	C<$@>, i.e. if it is a string, no line number or newline will be appended
546	(unlike with C<die>).	900	(unlike with C<die>).
547		901
548	This can be used as a softer means than C<cancel> to ask a coro to	902	This can be used as a softer means than either C<cancel> or C<safe_cancel
549	end itself, although there is no guarantee that the exception will lead to	903	>to ask a coro to end itself, although there is no guarantee that the
550	termination, and if the exception isn't caught it might well end the whole	904	exception will lead to termination, and if the exception isn't caught it
551	program.	905	might well end the whole program.
552		906
553	You might also think of C<throw> as being the moral equivalent of	907	You might also think of C<throw> as being the moral equivalent of
554	C<kill>ing a coro with a signal (in this case, a scalar).	908	C<kill>ing a coro with a signal (in this case, a scalar).
555		909
556	=item $coro->join	910	=item $coro->join
557		911
558	Wait until the coro terminates and return any values given to the	912	Wait until the coro terminates and return any values given to the
559	C<terminate> or C<cancel> functions. C<join> can be called concurrently	913	C<terminate> or C<cancel> functions. C<join> can be called concurrently
560	from multiple coro, and all will be resumed and given the status	914	from multiple threads, and all will be resumed and given the status
561	return once the C<$coro> terminates.	915	return once the C<$coro> terminates.
562		916
563	=cut
564
565	sub join {
566	my $self = shift;
567
568	unless ($self->{_status}) {
569	my $current = $current;
570
571	push @{$self->{_on_destroy}}, sub {
572	$current->ready;
573	undef $current;
574	};
575
576	&schedule while $current;
577	}
578
579	wantarray ? @{$self->{_status}} : $self->{_status}[0];
580	}
581
582	=item $coro->on_destroy (\&cb)	917	=item $coro->on_destroy (\&cb)
583		918
584	Registers a callback that is called when this coro gets destroyed,	919	Registers a callback that is called when this coro thread gets destroyed,
585	but before it is joined. The callback gets passed the terminate arguments,	920	that is, after it's resources have been freed but before it is joined. The
		921	callback gets passed the terminate/cancel arguments, if any, and I<must
586	if any, and I<must not> die, under any circumstances.	922	not> die, under any circumstances.
587		923
588	=cut	924	There can be any number of C<on_destroy> callbacks per coro, and there is
589		925	currently no way to remove a callback once added.
590	sub on_destroy {
591	my ($self, $cb) = @_;
592
593	push @{ $self->{_on_destroy} }, $cb;
594	}
595		926
596	=item $oldprio = $coro->prio ($newprio)	927	=item $oldprio = $coro->prio ($newprio)
597		928
598	Sets (or gets, if the argument is missing) the priority of the	929	Sets (or gets, if the argument is missing) the priority of the
599	coro. Higher priority coro get run before lower priority	930	coro thread. Higher priority coro get run before lower priority
600	coro. Priorities are small signed integers (currently -4 .. +3),	931	coros. Priorities are small signed integers (currently -4 .. +3),
601	that you can refer to using PRIO_xxx constants (use the import tag :prio	932	that you can refer to using PRIO_xxx constants (use the import tag :prio
602	to get then):	933	to get then):
603		934
604	PRIO_MAX > PRIO_HIGH > PRIO_NORMAL > PRIO_LOW > PRIO_IDLE > PRIO_MIN	935	PRIO_MAX > PRIO_HIGH > PRIO_NORMAL > PRIO_LOW > PRIO_IDLE > PRIO_MIN
605	3 > 1 > 0 > -1 > -3 > -4	936	3 > 1 > 0 > -1 > -3 > -4
606		937
607	# set priority to HIGH	938	# set priority to HIGH
608	current->prio (PRIO_HIGH);	939	current->prio (PRIO_HIGH);
609		940
610	The idle coro ($Coro::idle) always has a lower priority than any	941	The idle coro thread ($Coro::idle) always has a lower priority than any
611	existing coro.	942	existing coro.
612		943
613	Changing the priority of the current coro will take effect immediately,	944	Changing the priority of the current coro will take effect immediately,
614	but changing the priority of coro in the ready queue (but not	945	but changing the priority of a coro in the ready queue (but not running)
615	running) will only take effect after the next schedule (of that	946	will only take effect after the next schedule (of that coro). This is a
616	coro). This is a bug that will be fixed in some future version.	947	bug that will be fixed in some future version.
617		948
618	=item $newprio = $coro->nice ($change)	949	=item $newprio = $coro->nice ($change)
619		950
620	Similar to C<prio>, but subtract the given value from the priority (i.e.	951	Similar to C<prio>, but subtract the given value from the priority (i.e.
621	higher values mean lower priority, just as in unix).	952	higher values mean lower priority, just as in UNIX's nice command).
622		953
623	=item $olddesc = $coro->desc ($newdesc)	954	=item $olddesc = $coro->desc ($newdesc)
624		955
625	Sets (or gets in case the argument is missing) the description for this	956	Sets (or gets in case the argument is missing) the description for this
626	coro. This is just a free-form string you can associate with a	957	coro thread. This is just a free-form string you can associate with a
627	coro.	958	coro.
628		959
629	This method simply sets the C<< $coro->{desc} >> member to the given	960	This method simply sets the C<< $coro->{desc} >> member to the given
630	string. You can modify this member directly if you wish.	961	string. You can modify this member directly if you wish, and in fact, this
		962	is often preferred to indicate major processing states that can then be
		963	seen for example in a L<Coro::Debug> session:
		964
		965	sub my_long_function {
		966	local $Coro::current->{desc} = "now in my_long_function";
		967	...
		968	$Coro::current->{desc} = "my_long_function: phase 1";
		969	...
		970	$Coro::current->{desc} = "my_long_function: phase 2";
		971	...
		972	}
631		973
632	=cut	974	=cut
633		975
634	sub desc {	976	sub desc {
635	my $old = $_[0]{desc};	977	my $old = $_[0]{desc};
…		…
672	returning a new coderef. Unblocking means that calling the new coderef	1014	returning a new coderef. Unblocking means that calling the new coderef
673	will return immediately without blocking, returning nothing, while the	1015	will return immediately without blocking, returning nothing, while the
674	original code ref will be called (with parameters) from within another	1016	original code ref will be called (with parameters) from within another
675	coro.	1017	coro.
676		1018
677	The reason this function exists is that many event libraries (such as the	1019	The reason this function exists is that many event libraries (such as
678	venerable L<Event\|Event> module) are not thread-safe (a weaker form	1020	the venerable L<Event\|Event> module) are not thread-safe (a weaker form
679	of reentrancy). This means you must not block within event callbacks,	1021	of reentrancy). This means you must not block within event callbacks,
680	otherwise you might suffer from crashes or worse. The only event library	1022	otherwise you might suffer from crashes or worse. The only event library
681	currently known that is safe to use without C<unblock_sub> is L<EV>.	1023	currently known that is safe to use without C<unblock_sub> is L<EV> (but
		1024	you might still run into deadlocks if all event loops are blocked).
		1025
		1026	Coro will try to catch you when you block in the event loop
		1027	("FATAL: $Coro::idle blocked itself"), but this is just best effort and
		1028	only works when you do not run your own event loop.
682		1029
683	This function allows your callbacks to block by executing them in another	1030	This function allows your callbacks to block by executing them in another
684	coro where it is safe to block. One example where blocking is handy	1031	coro where it is safe to block. One example where blocking is handy
685	is when you use the L<Coro::AIO\|Coro::AIO> functions to save results to	1032	is when you use the L<Coro::AIO\|Coro::AIO> functions to save results to
686	disk, for example.	1033	disk, for example.
…		…
728	unshift @unblock_queue, [$cb, @_];	1075	unshift @unblock_queue, [$cb, @_];
729	$unblock_scheduler->ready;	1076	$unblock_scheduler->ready;
730	}	1077	}
731	}	1078	}
732		1079
733	=item $cb = Coro::rouse_cb	1080	=item $cb = rouse_cb
734		1081
735	Create and return a "rouse callback". That's a code reference that,	1082	Create and return a "rouse callback". That's a code reference that,
736	when called, will remember a copy of its arguments and notify the owner	1083	when called, will remember a copy of its arguments and notify the owner
737	coro of the callback.	1084	coro of the callback.
738		1085
739	See the next function.	1086	See the next function.
740		1087
741	=item @args = Coro::rouse_wait [$cb]	1088	=item @args = rouse_wait [$cb]
742		1089
743	Wait for the specified rouse callback (or the last one that was created in	1090	Wait for the specified rouse callback (or the last one that was created in
744	this coro).	1091	this coro).
745		1092
746	As soon as the callback is invoked (or when the callback was invoked	1093	As soon as the callback is invoked (or when the callback was invoked
…		…
753		1100
754	=back	1101	=back
755		1102
756	=cut	1103	=cut
757		1104
		1105	for my $module (qw(Channel RWLock Semaphore SemaphoreSet Signal Specific)) {
		1106	my $old = defined &{"Coro::$module\::new"} && \&{"Coro::$module\::new"};
		1107
		1108	*{"Coro::$module\::new"} = sub {
		1109	require "Coro/$module.pm";
		1110
		1111	# some modules have their new predefined in State.xs, some don't
		1112	*{"Coro::$module\::new"} = $old
		1113	if $old;
		1114
		1115	goto &{"Coro::$module\::new"};
		1116	};
		1117	}
		1118
758	1;	1119	1;
759		1120
760	=head1 HOW TO WAIT FOR A CALLBACK	1121	=head1 HOW TO WAIT FOR A CALLBACK
761		1122
762	It is very common for a coro to wait for some callback to be	1123	It is very common for a coro to wait for some callback to be
763	called. This occurs naturally when you use coro in an otherwise	1124	called. This occurs naturally when you use coro in an otherwise
764	event-based program, or when you use event-based libraries.	1125	event-based program, or when you use event-based libraries.
765		1126
766	These typically register a callback for some event, and call that callback	1127	These typically register a callback for some event, and call that callback
767	when the event occured. In a coro, however, you typically want to	1128	when the event occurred. In a coro, however, you typically want to
768	just wait for the event, simplyifying things.	1129	just wait for the event, simplyifying things.
769		1130
770	For example C<< AnyEvent->child >> registers a callback to be called when	1131	For example C<< AnyEvent->child >> registers a callback to be called when
771	a specific child has exited:	1132	a specific child has exited:
772		1133
…		…
775	But from within a coro, you often just want to write this:	1136	But from within a coro, you often just want to write this:
776		1137
777	my $status = wait_for_child $pid;	1138	my $status = wait_for_child $pid;
778		1139
779	Coro offers two functions specifically designed to make this easy,	1140	Coro offers two functions specifically designed to make this easy,
780	C<Coro::rouse_cb> and C<Coro::rouse_wait>.	1141	C<rouse_cb> and C<rouse_wait>.
781		1142
782	The first function, C<rouse_cb>, generates and returns a callback that,	1143	The first function, C<rouse_cb>, generates and returns a callback that,
783	when invoked, will save its arguments and notify the coro that	1144	when invoked, will save its arguments and notify the coro that
784	created the callback.	1145	created the callback.
785		1146
…		…
791	function mentioned above:	1152	function mentioned above:
792		1153
793	sub wait_for_child($) {	1154	sub wait_for_child($) {
794	my ($pid) = @_;	1155	my ($pid) = @_;
795		1156
796	my $watcher = AnyEvent->child (pid => $pid, cb => Coro::rouse_cb);	1157	my $watcher = AnyEvent->child (pid => $pid, cb => rouse_cb);
797		1158
798	my ($rpid, $rstatus) = Coro::rouse_wait;	1159	my ($rpid, $rstatus) = rouse_wait;
799	$rstatus	1160	$rstatus
800	}	1161	}
801		1162
802	In the case where C<rouse_cb> and C<rouse_wait> are not flexible enough,	1163	In the case where C<rouse_cb> and C<rouse_wait> are not flexible enough,
803	you can roll your own, using C<schedule>:	1164	you can roll your own, using C<schedule> and C<ready>:
804		1165
805	sub wait_for_child($) {	1166	sub wait_for_child($) {
806	my ($pid) = @_;	1167	my ($pid) = @_;
807		1168
808	# store the current coro in $current,	1169	# store the current coro in $current,
…		…
811	my ($done, $rstatus);	1172	my ($done, $rstatus);
812		1173
813	# pass a closure to ->child	1174	# pass a closure to ->child
814	my $watcher = AnyEvent->child (pid => $pid, cb => sub {	1175	my $watcher = AnyEvent->child (pid => $pid, cb => sub {
815	$rstatus = $_[1]; # remember rstatus	1176	$rstatus = $_[1]; # remember rstatus
816	$done = 1; # mark $rstatus as valud	1177	$done = 1; # mark $rstatus as valid
		1178	$current->ready; # wake up the waiting thread
817	});	1179	});
818		1180
819	# wait until the closure has been called	1181	# wait until the closure has been called
820	schedule while !$done;	1182	schedule while !$done;
821		1183
…		…
841	future to allow per-thread schedulers, but Coro::State does not yet allow	1203	future to allow per-thread schedulers, but Coro::State does not yet allow
842	this). I recommend disabling thread support and using processes, as having	1204	this). I recommend disabling thread support and using processes, as having
843	the windows process emulation enabled under unix roughly halves perl	1205	the windows process emulation enabled under unix roughly halves perl
844	performance, even when not used.	1206	performance, even when not used.
845		1207
		1208	Attempts to use threads created in another emulated process will crash
		1209	("cleanly", with a null pointer exception).
		1210
846	=item coro switching is not signal safe	1211	=item coro switching is not signal safe
847		1212
848	You must not switch to another coro from within a signal handler	1213	You must not switch to another coro from within a signal handler (only
849	(only relevant with %SIG - most event libraries provide safe signals).	1214	relevant with %SIG - most event libraries provide safe signals), I<unless>
		1215	you are sure you are not interrupting a Coro function.
850		1216
851	That means you I<MUST NOT> call any function that might "block" the	1217	That means you I<MUST NOT> call any function that might "block" the
852	current coro - C<cede>, C<schedule> C<< Coro::Semaphore->down >> or	1218	current coro - C<cede>, C<schedule> C<< Coro::Semaphore->down >> or
853	anything that calls those. Everything else, including calling C<ready>,	1219	anything that calls those. Everything else, including calling C<ready>,
854	works.	1220	works.
…		…
857		1223
858		1224
859	=head1 WINDOWS PROCESS EMULATION	1225	=head1 WINDOWS PROCESS EMULATION
860		1226
861	A great many people seem to be confused about ithreads (for example, Chip	1227	A great many people seem to be confused about ithreads (for example, Chip
862	Salzenberg called me unintelligent, incapable, stupid and ingullible,	1228	Salzenberg called me unintelligent, incapable, stupid and gullible,
863	while in the same mail making rather confused statements about perl	1229	while in the same mail making rather confused statements about perl
864	ithreads (for example, that memory or files would be shared), showing his	1230	ithreads (for example, that memory or files would be shared), showing his
865	lack of understanding of this area - if it is hard to understand for Chip,	1231	lack of understanding of this area - if it is hard to understand for Chip,
866	it is probably not obvious to everybody).	1232	it is probably not obvious to everybody).
867		1233
868	What follows is an ultra-condensed version of my talk about threads in	1234	What follows is an ultra-condensed version of my talk about threads in
869	scripting languages given onthe perl workshop 2009:	1235	scripting languages given on the perl workshop 2009:
870		1236
871	The so-called "ithreads" were originally implemented for two reasons:	1237	The so-called "ithreads" were originally implemented for two reasons:
872	first, to (badly) emulate unix processes on native win32 perls, and	1238	first, to (badly) emulate unix processes on native win32 perls, and
873	secondly, to replace the older, real thread model ("5.005-threads").	1239	secondly, to replace the older, real thread model ("5.005-threads").
874		1240
…		…
896	processes. What makes it so bad is that on non-windows platforms, you can	1262	processes. What makes it so bad is that on non-windows platforms, you can
897	actually take advantage of custom hardware for this purpose (as evidenced	1263	actually take advantage of custom hardware for this purpose (as evidenced
898	by the forks module, which gives you the (i-) threads API, just much	1264	by the forks module, which gives you the (i-) threads API, just much
899	faster).	1265	faster).
900		1266
901	Sharing data is in the i-threads model is done by transfering data	1267	Sharing data is in the i-threads model is done by transferring data
902	structures between threads using copying semantics, which is very slow -	1268	structures between threads using copying semantics, which is very slow -
903	shared data simply does not exist. Benchmarks using i-threads which are	1269	shared data simply does not exist. Benchmarks using i-threads which are
904	communication-intensive show extremely bad behaviour with i-threads (in	1270	communication-intensive show extremely bad behaviour with i-threads (in
905	fact, so bad that Coro, which cannot take direct advantage of multiple	1271	fact, so bad that Coro, which cannot take direct advantage of multiple
906	CPUs, is often orders of magnitude faster because it shares data using	1272	CPUs, is often orders of magnitude faster because it shares data using
…		…
936		1302
937	XS API: L<Coro::MakeMaker>.	1303	XS API: L<Coro::MakeMaker>.
938		1304
939	Low level Configuration, Thread Environment, Continuations: L<Coro::State>.	1305	Low level Configuration, Thread Environment, Continuations: L<Coro::State>.
940		1306
941	=head1 AUTHOR	1307	=head1 AUTHOR/SUPPORT/CONTACT
942		1308
943	Marc Lehmann <schmorp@schmorp.de>	1309	Marc A. Lehmann <schmorp@schmorp.de>
944	http://home.schmorp.de/	1310	http://software.schmorp.de/pkg/Coro.html
945		1311
946	=cut	1312	=cut
947		1313

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing Coro/Coro.pm (file contents): Revision 1.266 by root, Wed Aug 26 07:41:07 2009 UTC vs. Revision 1.346 by root, Fri Jul 14 23:20:07 2017 UTC

Diff Legend

Comparing Coro/Coro.pm (file contents):
Revision 1.266 by root, Wed Aug 26 07:41:07 2009 UTC vs.
Revision 1.346 by root, Fri Jul 14 23:20:07 2017 UTC