[ViewVC] Diff of: cvs/EV/EV.pm

Comparing EV/EV.pm (file contents):
Revision 1.10 by root, Mon Oct 29 07:24:37 2007 UTC vs.
Revision 1.53 by root, Sat Nov 24 16:57:30 2007 UTC

1	=head1 NAME	1	=head1 NAME
2		2
3	EV - perl interface to libevent, monkey.org/~provos/libevent/	3	EV - perl interface to libev, a high performance full-featured event loop
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	use EV;	7	use EV;
8		8
9	# TIMER	9	# TIMERS
10		10
11	my $w = EV::timer 2, 0, sub {	11	my $w = EV::timer 2, 0, sub {
12	warn "is called after 2s";	12	warn "is called after 2s";
13	};	13	};
14		14
15	my $w = EV::timer 2, 1, sub {	15	my $w = EV::timer 2, 2, sub {
16	warn "is called roughly every 2s (repeat = 1)";	16	warn "is called roughly every 2s (repeat = 2)";
17	};	17	};
18		18
19	undef $w; # destroy event watcher again	19	undef $w; # destroy event watcher again
20		20
21	# IO
22
23	my $w = EV::timer_abs 0, 60, sub {	21	my $w = EV::periodic 0, 60, 0, sub {
24	warn "is called every minute, on the minute, exactly";	22	warn "is called every minute, on the minute, exactly";
25	};	23	};
26		24
		25	# IO
		26
27	my $w = EV::io \*STDIN, EV::READ \| EV::PERSIST, sub {	27	my $w = EV::io *STDIN, EV::READ, sub {
28	my ($w, $events) = @_; # all callbacks get the watcher object and event mask	28	my ($w, $revents) = @_; # all callbacks receive the watcher and event mask
29	if ($events & EV::TIMEOUT) {
30	warn "nothing received on stdin for 10 seconds, retrying";
31	} else {
32	warn "stdin is readable, you entered: ", <STDIN>;	29	warn "stdin is readable, you entered: ", <STDIN>;
33	}
34	};	30	};
35	$w->timeout (10);	31
		32	# SIGNALS
		33
		34	my $w = EV::signal 'QUIT', sub {
		35	warn "sigquit received\n";
		36	};
		37
		38	# CHILD/PID STATUS CHANGES
36		39
		40	my $w = EV::child 666, sub {
		41	my ($w, $revents) = @_;
		42	my $status = $w->rstatus;
		43	};
		44
37	# MAINLOOP	45	# MAINLOOP
38	EV::dispatch; # loop as long as watchers are active	46	EV::loop; # loop until EV::unloop is called or all watchers stop
39	EV::loop; # the same thing	47	EV::loop EV::LOOP_ONESHOT; # block until at least one event could be handled
40	EV::loop EV::LOOP_ONCE;	48	EV::loop EV::LOOP_NONBLOCK; # try to handle same events, but do not block
41	EV::loop EV::LOOP_ONSHOT;
42		49
43	=head1 DESCRIPTION	50	=head1 DESCRIPTION
44		51
45	This module provides an interface to libevent	52	This module provides an interface to libev
46	(L<http://monkey.org/~provos/libevent/>). You probably should acquaint	53	(L<http://software.schmorp.de/pkg/libev.html>). While the documentation
47	yourself with its documentation and source code to be able to use this	54	below is comprehensive, one might also consult the documentation of libev
48	module fully.	55	itself (L<http://cvs.schmorp.de/libev/ev.html>) for more subtle details on
49		56	watcher semantics or some discussion on the available backends, or how to
50	Please note thta this module disables the libevent EPOLL method by	57	force a specific backend with C<LIBEV_FLAGS>.
51	default, see BUGS, below, if you need to enable it.
52		58
53	=cut	59	=cut
54		60
55	package EV;	61	package EV;
56		62
57	use strict;	63	use strict;
58		64
59	BEGIN {	65	BEGIN {
60	our $VERSION = '0.02';	66	our $VERSION = '1.3';
61	use XSLoader;	67	use XSLoader;
62	XSLoader::load "EV", $VERSION;	68	XSLoader::load "EV", $VERSION;
63	}	69	}
64		70
		71	@EV::IO::ISA =
		72	@EV::Timer::ISA =
		73	@EV::Periodic::ISA =
		74	@EV::Signal::ISA =
		75	@EV::Idle::ISA =
		76	@EV::Prepare::ISA =
		77	@EV::Check::ISA =
		78	@EV::Child::ISA = "EV::Watcher";
		79
65	=head1 BASIC INTERFACE	80	=head1 BASIC INTERFACE
66		81
67	=over 4	82	=over 4
68
69	=item $EV::NPRI
70
71	How many priority levels are available.
72		83
73	=item $EV::DIED	84	=item $EV::DIED
74		85
75	Must contain a reference to a function that is called when a callback	86	Must contain a reference to a function that is called when a callback
76	throws an exception (with $@ containing thr error). The default prints an	87	throws an exception (with $@ containing thr error). The default prints an
77	informative message and continues.	88	informative message and continues.
78		89
79	If this callback throws an exception it will be silently ignored.	90	If this callback throws an exception it will be silently ignored.
80		91
		92	=item $time = EV::time
		93
		94	Returns the current time in (fractional) seconds since the epoch.
		95
81	=item $time = EV::now	96	=item $time = EV::now
82		97
83	Returns the time in (fractional) seconds since the epoch.	98	Returns the time the last event loop iteration has been started. This
84		99	is the time that (relative) timers are based on, and refering to it is
85	=item $version = EV::version	100	usually faster then calling EV::time.
86		101
87	=item $method = EV::method	102	=item $method = EV::method
88		103
89	Return version string and event polling method used.	104	Returns an integer describing the backend used by libev (EV::METHOD_SELECT
		105	or EV::METHOD_EPOLL).
90		106
91	=item EV::loop $flags # EV::LOOP_ONCE, EV::LOOP_ONESHOT	107	=item EV::loop [$flags]
92		108
93	=item EV::loopexit $after	109	Begin checking for events and calling callbacks. It returns when a
		110	callback calls EV::unloop.
94		111
95	Exit any active loop or dispatch after C<$after> seconds or immediately if	112	The $flags argument can be one of the following:
96	C<$after> is missing or zero.
97		113
98	=item EV::dispatch	114	0 as above
		115	EV::LOOP_ONESHOT block at most once (wait, but do not loop)
		116	EV::LOOP_NONBLOCK do not block at all (fetch/handle events but do not wait)
99		117
100	Same as C<EV::loop 0>.	118	=item EV::unloop [$how]
101		119
102	=item EV::event $callback	120	When called with no arguments or an argument of EV::UNLOOP_ONE, makes the
		121	innermost call to EV::loop return.
103		122
104	Creates a new event watcher waiting for nothing, calling the given callback.	123	When called with an argument of EV::UNLOOP_ALL, all calls to EV::loop will return as
		124	fast as possible.
105		125
		126	=item EV::once $fh_or_undef, $events, $timeout, $cb->($revents)
		127
		128	This function rolls together an I/O and a timer watcher for a single
		129	one-shot event without the need for managing a watcher object.
		130
		131	If C<$fh_or_undef> is a filehandle or file descriptor, then C<$events>
		132	must be a bitset containing either C<EV::READ>, C<EV::WRITE> or C<EV::READ
		133	\| EV::WRITE>, indicating the type of I/O event you want to wait for. If
		134	you do not want to wait for some I/O event, specify C<undef> for
		135	C<$fh_or_undef> and C<0> for C<$events>).
		136
		137	If timeout is C<undef> or negative, then there will be no
		138	timeout. Otherwise a EV::timer with this value will be started.
		139
		140	When an error occurs or either the timeout or I/O watcher triggers, then
		141	the callback will be called with the received event set (in general
		142	you can expect it to be a combination of C<EV:ERROR>, C<EV::READ>,
		143	C<EV::WRITE> and C<EV::TIMEOUT>).
		144
		145	EV::once doesn't return anything: the watchers stay active till either
		146	of them triggers, then they will be stopped and freed, and the callback
		147	invoked.
		148
		149	=back
		150
		151	=head2 WATCHER
		152
		153	A watcher is an object that gets created to record your interest in some
		154	event. For instance, if you want to wait for STDIN to become readable, you
		155	would create an EV::io watcher for that:
		156
		157	my $watcher = EV::io *STDIN, EV::READ, sub {
		158	my ($watcher, $revents) = @_;
		159	warn "yeah, STDIN should not be readable without blocking!\n"
		160	};
		161
		162	All watchers can be active (waiting for events) or inactive (paused). Only
		163	active watchers will have their callbacks invoked. All callbacks will be
		164	called with at least two arguments: the watcher and a bitmask of received
		165	events.
		166
		167	Each watcher type has its associated bit in revents, so you can use the
		168	same callback for multiple watchers. The event mask is named after the
		169	type, i..e. EV::child sets EV::CHILD, EV::prepare sets EV::PREPARE,
		170	EV::periodic sets EV::PERIODIC and so on, with the exception of IO events
		171	(which can set both EV::READ and EV::WRITE bits), and EV::timer (which
		172	uses EV::TIMEOUT).
		173
		174	In the rare case where one wants to create a watcher but not start it at
		175	the same time, each constructor has a variant with a trailing C<_ns> in
		176	its name, e.g. EV::io has a non-starting variant EV::io_ns and so on.
		177
		178	Please note that a watcher will automatically be stopped when the watcher
		179	object is destroyed, so you I<need> to keep the watcher objects returned by
		180	the constructors.
		181
		182	Also, all methods changing some aspect of a watcher (->set, ->priority,
		183	->fh and so on) automatically stop and start it again if it is active,
		184	which means pending events get lost.
		185
		186	=head2 WATCHER TYPES
		187
		188	Now lets move to the existing watcher types and asociated methods.
		189
		190	The following methods are available for all watchers. Then followes a
		191	description of each watcher constructor (EV::io, EV::timer, EV::periodic,
		192	EV::signal, EV::child, EV::idle, EV::prepare and EV::check), followed by
		193	any type-specific methods (if any).
		194
		195	=over 4
		196
		197	=item $w->start
		198
		199	Starts a watcher if it isn't active already. Does nothing to an already
		200	active watcher. By default, all watchers start out in the active state
		201	(see the description of the C<_ns> variants if you need stopped watchers).
		202
		203	=item $w->stop
		204
		205	Stop a watcher if it is active. Also clear any pending events (events that
		206	have been received but that didn't yet result in a callback invocation),
		207	regardless of wether the watcher was active or not.
		208
		209	=item $bool = $w->is_active
		210
		211	Returns true if the watcher is active, false otherwise.
		212
		213	=item $current_data = $w->data
		214
		215	=item $old_data = $w->data ($new_data)
		216
		217	Queries a freely usable data scalar on the watcher and optionally changes
		218	it. This is a way to associate custom data with a watcher:
		219
		220	my $w = EV::timer 60, 0, sub {
		221	warn $_[0]->data;
		222	};
		223	$w->data ("print me!");
		224
		225	=item $current_cb = $w->cb
		226
		227	=item $old_cb = $w->cb ($new_cb)
		228
		229	Queries the callback on the watcher and optionally changes it. You can do
		230	this at any time without the watcher restarting.
		231
		232	=item $current_priority = $w->priority
		233
		234	=item $old_priority = $w->priority ($new_priority)
		235
		236	Queries the priority on the watcher and optionally changes it. Pending
		237	watchers with higher priority will be invoked first. The valid range of
		238	priorities lies between EV::MAXPRI (default 2) and EV::MINPRI (default
		239	-2). If the priority is outside this range it will automatically be
		240	normalised to the nearest valid priority.
		241
		242	The default priority of any newly-created watcher is 0.
		243
		244	Note that the priority semantics have not yet been fleshed out and are
		245	subject to almost certain change.
		246
		247	=item $w->trigger ($revents)
		248
		249	Call the callback now with the given event mask.
		250
		251	=item $previous_state = $w->keepalive ($bool)
		252
		253	Normally, C<EV::loop> will return when there are no active watchers
		254	(which is a "deadlock" because no progress can be made anymore). This is
		255	convinient because it allows you to start your watchers (and your jobs),
		256	call C<EV::loop> once and when it returns you know that all your jobs are
		257	finished (or they forgot to register some watchers for their task :).
		258
		259	Sometimes, however, this gets in your way, for example when you the module
		260	that calls C<EV::loop> (usually the main program) is not the same module
		261	as a long-living watcher (for example a DNS client module written by
		262	somebody else even). Then you might want any outstanding requests to be
		263	handled, but you would not want to keep C<EV::loop> from returning just
		264	because you happen to have this long-running UDP port watcher.
		265
		266	In this case you can clear the keepalive status, which means that even
		267	though your watcher is active, it won't keep C<EV::loop> from returning.
		268
		269	The initial value for keepalive is true (enabled), and you cna change it
		270	any time.
		271
		272	Example: Register an IO watcher for some UDP socket but do not keep the
		273	event loop from running just because of that watcher.
		274
		275	my $udp_socket = ...
		276	my $udp_watcher = EV::io $udp_socket, EV::READ, sub { ... };
		277	$udp_watcher->keepalive (0);
		278
106	=item my $w = EV::io $fileno_or_fh, $eventmask, $callback	279	=item $w = EV::io $fileno_or_fh, $eventmask, $callback
107		280
108	=item my $w = EV::io_ns $fileno_or_fh, $eventmask, $callback	281	=item $w = EV::io_ns $fileno_or_fh, $eventmask, $callback
109		282
110	As long as the returned watcher object is alive, call the C<$callback>	283	As long as the returned watcher object is alive, call the C<$callback>
111	when the events specified in C<$eventmask> happen. Initially, the timeout	284	when the events specified in C<$eventmask>.
112	is disabled.
113		285
114	You can additionall set a timeout to occur on the watcher, but note that
115	this timeout will not be reset when you get an I/O event in the EV::PERSIST
116	case, and reaching a timeout will always stop the watcher even in the
117	EV::PERSIST case.
118
119	If you want a timeout to occur only after a specific time of inactivity, set
120	a repeating timeout and do NOT use EV::PERSIST.
121
122	Eventmask can be one or more of these constants ORed together:	286	The $eventmask can be one or more of these constants ORed together:
123		287
124	EV::READ wait until read() wouldn't block anymore	288	EV::READ wait until read() wouldn't block anymore
125	EV::WRITE wait until write() wouldn't block anymore	289	EV::WRITE wait until write() wouldn't block anymore
126	EV::PERSIST stay active after a (non-timeout) event occured
127		290
128	The C<io_ns> variant doesn't add/start the newly created watcher.	291	The C<io_ns> variant doesn't start (activate) the newly created watcher.
129		292
130	=item my $w = EV::timed_io $fileno_or_fh, $eventmask, $timeout, $callback	293	=item $w->set ($fileno_or_fh, $eventmask)
131		294
132	=item my $w = EV::timed_io_ns $fileno_or_fh, $eventmask, $timeout, $callback	295	Reconfigures the watcher, see the constructor above for details. Can be
		296	called at any time.
133		297
134	Same as C<io> and C<io_ns>, but also specifies a timeout (as if there was	298	=item $current_fh = $w->fh
135	a call to C<< $w->timeout ($timout, 1) >>. The persist flag is not allowed
136	and will automatically be cleared. The watcher will be restarted after each event.
137		299
138	If the timeout is zero or undef, no timeout will be set, and a normal	300	=item $old_fh = $w->fh ($new_fh)
139	watcher (with the persist flag set!) will be created.
140		301
141	This has the effect of timing out after the specified period of inactivity	302	Returns the previously set filehandle and optionally set a new one.
142	has happened.
143		303
144	Due to the design of libevent, this is also relatively inefficient, having	304	=item $current_eventmask = $w->events
145	one or two io watchers and a separate timeout watcher that you reset on
146	activity (by calling its C<start> method) is usually more efficient.
147		305
		306	=item $old_eventmask = $w->events ($new_eventmask)
		307
		308	Returns the previously set event mask and optionally set a new one.
		309
		310
148	=item my $w = EV::timer $after, $repeat, $callback	311	=item $w = EV::timer $after, $repeat, $callback
149		312
150	=item my $w = EV::timer_ns $after, $repeat, $callback	313	=item $w = EV::timer_ns $after, $repeat, $callback
151		314
152	Calls the callback after C<$after> seconds. If C<$repeat> is true, the	315	Calls the callback after C<$after> seconds (which may be fractional). If
153	timer will be restarted after the callback returns. This means that the	316	C<$repeat> is non-zero, the timer will be restarted (with the $repeat
154	callback would be called roughly every C<$after> seconds, prolonged by the	317	value as $after) after the callback returns.
155	time the callback takes.
156		318
		319	This means that the callback would be called roughly after C<$after>
		320	seconds, and then every C<$repeat> seconds. The timer does his best not
		321	to drift, but it will not invoke the timer more often then once per event
		322	loop iteration, and might drift in other cases. If that isn't acceptable,
		323	look at EV::periodic, which can provide long-term stable timers.
		324
		325	The timer is based on a monotonic clock, that is, if somebody is sitting
		326	in front of the machine while the timer is running and changes the system
		327	clock, the timer will nevertheless run (roughly) the same time.
		328
157	The C<timer_ns> variant doesn't add/start the newly created watcher.	329	The C<timer_ns> variant doesn't start (activate) the newly created watcher.
158		330
159	=item my $w = EV::timer_abs $at, $interval, $callback	331	=item $w->set ($after, $repeat)
160		332
161	=item my $w = EV::timer_abs_ns $at, $interval, $callback	333	Reconfigures the watcher, see the constructor above for details. Can be at
		334	any time.
162		335
163	Similar to EV::timer, but the time is given as an absolute point in time	336	=item $w->again
164	(C<$at>), plus an optional C<$interval>.
165		337
166	If the C<$interval> is zero, then the callback will be called at the time	338	Similar to the C<start> method, but has special semantics for repeating timers:
167	C<$at> if that is in the future, or as soon as possible if its in the
168	past. It will not automatically repeat.
169		339
170	If the C<$interval> is nonzero, then the watcher will always be scheduled	340	If the timer is active and non-repeating, it will be stopped.
171	to time out at the next C<$at + integer * $interval> time.
172		341
173	This can be used to schedule a callback to run at very regular intervals,	342	If the timer is active and repeating, reset the timeout to occur
174	as long as the processing time is less then the interval (otherwise	343	C<$repeat> seconds after now.
175	obviously events will be skipped).	344
		345	If the timer is inactive and repeating, start it using the repeat value.
		346
		347	Otherwise do nothing.
		348
		349	This behaviour is useful when you have a timeout for some IO
		350	operation. You create a timer object with the same value for C<$after> and
		351	C<$repeat>, and then, in the read/write watcher, run the C<again> method
		352	on the timeout.
		353
		354
		355	=item $w = EV::periodic $at, $interval, $reschedule_cb, $callback
		356
		357	=item $w = EV::periodic_ns $at, $interval, $reschedule_cb, $callback
		358
		359	Similar to EV::timer, but is not based on relative timeouts but on
		360	absolute times. Apart from creating "simple" timers that trigger "at" the
		361	specified time, it can also be used for non-drifting absolute timers and
		362	more complex, cron-like, setups that are not adversely affected by time
		363	jumps (i.e. when the system clock is changed by explicit date -s or other
		364	means such as ntpd). It is also the most complex watcher type in EV.
		365
		366	It has three distinct "modes":
		367
		368	=over 4
		369
		370	=item * absolute timer ($interval = $reschedule_cb = 0)
		371
		372	This time simply fires at the wallclock time C<$at> and doesn't repeat. It
		373	will not adjust when a time jump occurs, that is, if it is to be run
		374	at January 1st 2011 then it will run when the system time reaches or
		375	surpasses this time.
		376
		377	=item * non-repeating interval timer ($interval > 0, $reschedule_cb = 0)
		378
		379	In this mode the watcher will always be scheduled to time out at the
		380	next C<$at + N * $interval> time (for some integer N) and then repeat,
		381	regardless of any time jumps.
		382
		383	This can be used to create timers that do not drift with respect to system
		384	time:
		385
		386	my $hourly = EV::periodic 0, 3600, 0, sub { print "once/hour\n" };
		387
		388	That doesn't mean there will always be 3600 seconds in between triggers,
		389	but only that the the clalback will be called when the system time shows a
		390	full hour (UTC).
176		391
177	Another way to think about it (for the mathematically inclined) is that	392	Another way to think about it (for the mathematically inclined) is that
178	C<timer_abs> will try to tun the callback at the next possible time where	393	EV::periodic will try to run the callback in this mode at the next
179	C<$time = $at (mod $interval)>, regardless of any time jumps.	394	possible time where C<$time = $at (mod $interval)>, regardless of any time
		395	jumps.
180		396
181	The C<timer_abs_ns> variant doesn't add/start the newly created watcher.	397	=item * manual reschedule mode ($reschedule_cb = coderef)
182		398
183	=item my $w = EV::signal $signum, $callback	399	In this mode $interval and $at are both being ignored. Instead, each
		400	time the periodic watcher gets scheduled, the reschedule callback
		401	($reschedule_cb) will be called with the watcher as first, and the current
		402	time as second argument.
184		403
185	=item my $w = EV::signal_ns $signum, $callback	404	I<This callback MUST NOT stop or destroy this or any other periodic
		405	watcher, ever>. If you need to stop it, return 1e30 and stop it
		406	afterwards.
186		407
187	Call the callback when signal $signum is received.	408	It must return the next time to trigger, based on the passed time value
		409	(that is, the lowest time value larger than to the second argument). It
		410	will usually be called just before the callback will be triggered, but
		411	might be called at other times, too.
188		412
189	The C<signal_ns> variant doesn't add/start the newly created watcher.	413	This can be used to create very complex timers, such as a timer that
		414	triggers on each midnight, local time (actually 24 hours after the last
		415	midnight, to keep the example simple. If you know a way to do it correctly
		416	in about the same space (without requiring elaborate modules), drop me a
		417	note :):
		418
		419	my $daily = EV::periodic 0, 0, sub {
		420	my ($w, $now) = @_;
		421
		422	use Time::Local ();
		423	my (undef, undef, undef, $d, $m, $y) = localtime $now;
		424	86400 + Time::Local::timelocal 0, 0, 0, $d, $m, $y
		425	}, sub {
		426	print "it's midnight or likely shortly after, now\n";
		427	};
190		428
191	=back	429	=back
192		430
193	=head1 THE EV::Event CLASS	431	The C<periodic_ns> variant doesn't start (activate) the newly created watcher.
194		432
195	All EV functions creating an event watcher (designated by C<my $w =>	433	=item $w->set ($at, $interval, $reschedule_cb)
196	above) support the following methods on the returned watcher object:
197		434
198	=over 4	435	Reconfigures the watcher, see the constructor above for details. Can be at
		436	any time.
199		437
200	=item $w->add ($timeout)	438	=item $w->again
201		439
202	Stops and (re-)starts the event watcher, setting the optional timeout to	440	Simply stops and starts the watcher again.
203	the given value, or clearing the timeout if none is given.
204		441
205	=item $w->start
206		442
207	Stops and (re-)starts the event watcher without touching the timeout.	443	=item $w = EV::signal $signal, $callback
208		444
209	=item $w->del	445	=item $w = EV::signal_ns $signal, $callback
210		446
211	=item $w->stop	447	Call the callback when $signal is received (the signal can be specified
		448	by number or by name, just as with kill or %SIG).
212		449
213	Stop the event watcher if it was started.	450	EV will grab the signal for the process (the kernel only allows one
		451	component to receive a signal at a time) when you start a signal watcher,
		452	and removes it again when you stop it. Perl does the same when you
		453	add/remove callbacks to %SIG, so watch out.
214		454
215	=item $current_callback = $w->cb	455	You can have as many signal watchers per signal as you want.
216		456
217	=item $old_callback = $w->cb ($new_callback)	457	The C<signal_ns> variant doesn't start (activate) the newly created watcher.
218		458
219	Return the previously set callback and optionally set a new one.	459	=item $w->set ($signal)
220		460
221	=item $current_fh = $w->fh	461	Reconfigures the watcher, see the constructor above for details. Can be at
		462	any time.
222		463
223	=item $old_fh = $w->fh ($new_fh)
224
225	Returns the previously set filehandle and optionally set a new one (also
226	clears the EV::SIGNAL flag when setting a filehandle).
227
228	=item $current_signal = $w->signal	464	=item $current_signum = $w->signal
229		465
230	=item $old_signal = $w->signal ($new_signal)	466	=item $old_signum = $w->signal ($new_signal)
231		467
232	Returns the previously set signal number and optionally set a new one (also sets	468	Returns the previously set signal (always as a number not name) and
233	the EV::SIGNAL flag when setting a signal).	469	optionally set a new one.
234		470
235	=item $current_eventmask = $w->events
236		471
237	=item $old_eventmask = $w->events ($new_eventmask)	472	=item $w = EV::child $pid, $callback
238		473
		474	=item $w = EV::child_ns $pid, $callback
		475
		476	Call the callback when a status change for pid C<$pid> (or any pid
		477	if C<$pid> is 0) has been received. More precisely: when the process
		478	receives a SIGCHLD, EV will fetch the outstanding exit/wait status for all
		479	changed/zombie children and call the callback.
		480
		481	You can access both status and pid by using the C<rstatus> and C<rpid>
		482	methods on the watcher object.
		483
		484	You can have as many pid watchers per pid as you want.
		485
		486	The C<child_ns> variant doesn't start (activate) the newly created watcher.
		487
		488	=item $w->set ($pid)
		489
		490	Reconfigures the watcher, see the constructor above for details. Can be at
		491	any time.
		492
		493	=item $current_pid = $w->pid
		494
		495	=item $old_pid = $w->pid ($new_pid)
		496
239	Returns the previously set event mask and optionally set a new one.	497	Returns the previously set process id and optionally set a new one.
240		498
241	=item $w->timeout ($after, $repeat)	499	=item $exit_status = $w->rstatus
242		500
243	Resets the timeout (see C<EV::timer> for details).	501	Return the exit/wait status (as returned by waitpid, see the waitpid entry
		502	in perlfunc).
244		503
245	=item $w->timeout_abs ($at, $interval)	504	=item $pid = $w->rpid
246		505
247	Resets the timeout (see C<EV::timer_abs> for details).	506	Return the pid of the awaited child (useful when you have installed a
		507	watcher for all pids).
248		508
249	=item $w->priority_set ($priority)
250		509
251	Set the priority of the watcher to C<$priority> (0 <= $priority < $EV::NPRI).	510	=item $w = EV::idle $callback
		511
		512	=item $w = EV::idle_ns $callback
		513
		514	Call the callback when there are no pending io, timer/periodic, signal or
		515	child events, i.e. when the process is idle.
		516
		517	The process will not block as long as any idle watchers are active, and
		518	they will be called repeatedly until stopped.
		519
		520	The C<idle_ns> variant doesn't start (activate) the newly created watcher.
		521
		522
		523	=item $w = EV::prepare $callback
		524
		525	=item $w = EV::prepare_ns $callback
		526
		527	Call the callback just before the process would block. You can still
		528	create/modify any watchers at this point.
		529
		530	See the EV::check watcher, below, for explanations and an example.
		531
		532	The C<prepare_ns> variant doesn't start (activate) the newly created watcher.
		533
		534
		535	=item $w = EV::check $callback
		536
		537	=item $w = EV::check_ns $callback
		538
		539	Call the callback just after the process wakes up again (after it has
		540	gathered events), but before any other callbacks have been invoked.
		541
		542	This is used to integrate other event-based software into the EV
		543	mainloop: You register a prepare callback and in there, you create io and
		544	timer watchers as required by the other software. Here is a real-world
		545	example of integrating Net::SNMP (with some details left out):
		546
		547	our @snmp_watcher;
		548
		549	our $snmp_prepare = EV::prepare sub {
		550	# do nothing unless active
		551	$dispatcher->{_event_queue_h}
		552	or return;
		553
		554	# make the dispatcher handle any outstanding stuff
		555	... not shown
		556
		557	# create an IO watcher for each and every socket
		558	@snmp_watcher = (
		559	(map { EV::io $_, EV::READ, sub { } }
		560	keys %{ $dispatcher->{_descriptors} }),
		561
		562	EV::timer +($event->[Net::SNMP::Dispatcher::_ACTIVE]
		563	? $event->[Net::SNMP::Dispatcher::_TIME] - EV::now : 0),
		564	0, sub { },
		565	);
		566	};
		567
		568	The callbacks are irrelevant (and are not even being called), the
		569	only purpose of those watchers is to wake up the process as soon as
		570	one of those events occurs (socket readable, or timer timed out). The
		571	corresponding EV::check watcher will then clean up:
		572
		573	our $snmp_check = EV::check sub {
		574	# destroy all watchers
		575	@snmp_watcher = ();
		576
		577	# make the dispatcher handle any new stuff
		578	... not shown
		579	};
		580
		581	The callbacks of the created watchers will not be called as the watchers
		582	are destroyed before this cna happen (remember EV::check gets called
		583	first).
		584
		585	The C<check_ns> variant doesn't start (activate) the newly created watcher.
252		586
253	=back	587	=back
254		588
255	=head1 BUGS	589	=head1 THREADS
256		590
257	Lots. Libevent itself isn't well tested and rather buggy, and this module	591	Threads are not supported by this module in any way. Perl pseudo-threads
258	is quite new at the moment.	592	is evil stuff and must die. As soon as Perl gains real threads I will work
		593	on thread support for it.
259		594
260	Please note that the epoll method is not, in general, reliable in programs	595	=head1 FORK
261	that use fork (even if no libveent calls are being made in the forked
262	process). If your program behaves erratically, try setting the environment
263	variable C<EVENT_NOEPOLL> first when running the program.
264		596
265	In general, if you fork, then you can only use the EV module in one of the	597	Most of the "improved" event delivering mechanisms of modern operating
266	children.	598	systems have quite a few problems with fork(2) (to put it bluntly: it is
		599	not supported and usually destructive). Libev makes it possible to work
		600	around this by having a function that recreates the kernel state after
		601	fork in the child.
		602
		603	On non-win32 platforms, this module requires the pthread_atfork
		604	functionality to do this automatically for you. This function is quite
		605	buggy on most BSDs, though, so YMMV. The overhead for this is quite
		606	negligible, because everything the function currently does is set a flag
		607	that is checked only when the event loop gets used the next time, so when
		608	you do fork but not use EV, the overhead is minimal.
		609
		610	On win32, there is no notion of fork so all this doesn't apply, of course.
267		611
268	=cut	612	=cut
269		613
270	our $DIED = sub {	614	our $DIED = sub {
271	warn "EV: error in callback (ignoring): $@";	615	warn "EV: error in callback (ignoring): $@";
272	};	616	};
273		617
274	our $NPRI = 4;	618	default_loop
275	our $BASE = init;	619	or die 'EV: cannot initialise libev backend. bad $ENV{LIBEV_METHODS}?';
276	priority_init $NPRI;
277
278	push @AnyEvent::REGISTRY, [EV => "EV::AnyEvent"];
279		620
280	1;	621	1;
281		622
282	=head1 SEE ALSO	623	=head1 SEE ALSO
283		624
284	L<EV::DNS>, L<event(3)>, L<event.h>, L<evdns.h>.	625	L<EV::DNS>.
285	L<EV::AnyEvent>.
286		626
287	=head1 AUTHOR	627	=head1 AUTHOR
288		628
289	Marc Lehmann <schmorp@schmorp.de>	629	Marc Lehmann <schmorp@schmorp.de>
290	http://home.schmorp.de/	630	http://home.schmorp.de/

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing EV/EV.pm (file contents): Revision 1.10 by root, Mon Oct 29 07:24:37 2007 UTC vs. Revision 1.53 by root, Sat Nov 24 16:57:30 2007 UTC

Diff Legend

Comparing EV/EV.pm (file contents):
Revision 1.10 by root, Mon Oct 29 07:24:37 2007 UTC vs.
Revision 1.53 by root, Sat Nov 24 16:57:30 2007 UTC