[ViewVC] Diff of: cvs/EV/EV.pm

Comparing EV/EV.pm (file contents):
Revision 1.33 by root, Fri Nov 9 19:33:51 2007 UTC vs.
Revision 1.115 by root, Tue Apr 28 00:50:56 2009 UTC

…		…
2		2
3	EV - perl interface to libev, a high performance full-featured event loop	3	EV - perl interface to libev, a high performance full-featured event loop
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	use EV;	7	use EV;
		8
		9	# TIMERS
		10
		11	my $w = EV::timer 2, 0, sub {
		12	warn "is called after 2s";
		13	};
		14
		15	my $w = EV::timer 2, 2, sub {
		16	warn "is called roughly every 2s (repeat = 2)";
		17	};
		18
		19	undef $w; # destroy event watcher again
		20
		21	my $w = EV::periodic 0, 60, 0, sub {
		22	warn "is called every minute, on the minute, exactly";
		23	};
		24
		25	# IO
		26
		27	my $w = EV::io *STDIN, EV::READ, sub {
		28	my ($w, $revents) = @_; # all callbacks receive the watcher and event mask
		29	warn "stdin is readable, you entered: ", <STDIN>;
		30	};
		31
		32	# SIGNALS
		33
		34	my $w = EV::signal 'QUIT', sub {
		35	warn "sigquit received\n";
		36	};
		37
		38	# CHILD/PID STATUS CHANGES
8		39
9	# TIMERS	40	my $w = EV::child 666, 0, sub {
		41	my ($w, $revents) = @_;
		42	my $status = $w->rstatus;
		43	};
10		44
11	my $w = EV::timer 2, 0, sub {	45	# STAT CHANGES
12	warn "is called after 2s";	46	my $w = EV::stat "/etc/passwd", 10, sub {
13	};
14
15	my $w = EV::timer 2, 1, sub {
16	warn "is called roughly every 2s (repeat = 1)";
17	};
18
19	undef $w; # destroy event watcher again
20
21	my $w = EV::periodic 0, 60, 0, sub {
22	warn "is called every minute, on the minute, exactly";
23	};
24
25	# IO
26
27	my $w = EV::io *STDIN, EV::READ, sub {
28	my ($w, $revents) = @_; # all callbacks get the watcher object and event mask
29	warn "stdin is readable, you entered: ", <STDIN>;
30	};
31
32	# SIGNALS
33
34	my $w = EV::signal 'QUIT', sub {
35	warn "sigquit received\n";
36	};
37
38	my $w = EV::signal 3, sub {
39	warn "sigquit received (this is GNU/Linux, right?)\n";
40	};
41
42	# CHILD/PID STATUS CHANGES
43
44	my $w = EV::child 666, sub {
45	my ($w, $revents) = @_;	47	my ($w, $revents) = @_;
46	# my $pid = $w->rpid;	48	warn $w->path, " has changed somehow.\n";
47	my $status = $w->rstatus;
48	};	49	};
49		50
50	# MAINLOOP	51	# MAINLOOP
51	EV::loop; # loop until EV::loop_done is called	52	EV::loop; # loop until EV::unloop is called or all watchers stop
52	EV::loop EV::LOOP_ONESHOT; # block until at least one event could be handled	53	EV::loop EV::LOOP_ONESHOT; # block until at least one event could be handled
53	EV::loop EV::LOOP_NONBLOCK; # try to handle same events, but do not block	54	EV::loop EV::LOOP_NONBLOCK; # try to handle same events, but do not block
54		55
55	=head1 DESCRIPTION	56	=head1 DESCRIPTION
56		57
57	This module provides an interface to libev	58	This module provides an interface to libev
58	(L<http://software.schmorp.de/pkg/libev.html>).	59	(L<http://software.schmorp.de/pkg/libev.html>). While the documentation
		60	below is comprehensive, one might also consult the documentation of
		61	libev itself (L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod> or
		62	F<perldoc EV::libev>) for more subtle details on watcher semantics or some
		63	discussion on the available backends, or how to force a specific backend
		64	with C<LIBEV_FLAGS>, or just about in any case because it has much more
		65	detailed information.
		66
		67	This module is very fast and scalable. It is actually so fast that you
		68	can use it through the L<AnyEvent> module, stay portable to other event
		69	loops (if you don't rely on any watcher types not available through it)
		70	and still be faster than with any other event loop currently supported in
		71	Perl.
		72
		73	=head2 MODULE EXPORTS
		74
		75	This module does not export any symbols.
59		76
60	=cut	77	=cut
61		78
62	package EV;	79	package EV;
63		80
		81	no warnings;
64	use strict;	82	use strict;
65		83
66	BEGIN {	84	BEGIN {
67	our $VERSION = '0.6';	85	our $VERSION = '3.6';
68	use XSLoader;	86	use XSLoader;
69	XSLoader::load "EV", $VERSION;	87	XSLoader::load "EV", $VERSION;
70	}	88	}
71		89
72	@EV::Io::ISA =	90	@EV::IO::ISA =
73	@EV::Timer::ISA =	91	@EV::Timer::ISA =
74	@EV::Periodic::ISA =	92	@EV::Periodic::ISA =
75	@EV::Signal::ISA =	93	@EV::Signal::ISA =
		94	@EV::Child::ISA =
		95	@EV::Stat::ISA =
76	@EV::Idle::ISA =	96	@EV::Idle::ISA =
77	@EV::Prepare::ISA =	97	@EV::Prepare::ISA =
78	@EV::Check::ISA =	98	@EV::Check::ISA =
79	@EV::Child::ISA = "EV::Watcher";	99	@EV::Embed::ISA =
		100	@EV::Fork::ISA =
		101	@EV::Async::ISA =
		102	"EV::Watcher";
		103
		104	@EV::Loop::Default::ISA = "EV::Loop";
		105
		106	=head1 EVENT LOOPS
		107
		108	EV supports multiple event loops: There is a single "default event loop"
		109	that can handle everything including signals and child watchers, and any
		110	number of "dynamic event loops" that can use different backends (with
		111	various limitations), but no child and signal watchers.
		112
		113	You do not have to do anything to create the default event loop: When
		114	the module is loaded a suitable backend is selected on the premise of
		115	selecting a working backend (which for example rules out kqueue on most
		116	BSDs). Modules should, unless they have "special needs" always use the
		117	default loop as this is fastest (perl-wise), best supported by other
		118	modules (e.g. AnyEvent or Coro) and most portable event loop.
		119
		120	For specific programs you can create additional event loops dynamically.
		121
		122	If you want to take advantage of kqueue (which often works properly for
		123	sockets only) even though the default loop doesn't enable it, you can
		124	I<embed> a kqueue loop into the default loop: running the default loop
		125	will then also service the kqueue loop to some extent. See the example in
		126	the section about embed watchers for an example on how to achieve that.
		127
		128	=over 4
		129
		130	=item $loop = new EV::Loop [$flags]
		131
		132	Create a new event loop as per the specified flags. Please refer to
		133	the C<ev_loop_new ()> function description in the libev documentation
		134	(L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod#GLOBAL_FUNCTIONS>,
		135	or locally-installed as F<EV::libev> manpage) for more info.
		136
		137	The loop will automatically be destroyed when it is no longer referenced
		138	by any watcher and the loop object goes out of scope.
		139
		140	If you are not embedding the loop, then Using C<EV::FLAG_FORKCHECK>
		141	is recommended, as only the default event loop is protected by this
		142	module. If you I<are> embedding this loop in the default loop, this is not
		143	necessary, as C<EV::embed> automatically does the right thing on fork.
		144
		145	=item $loop->loop_fork
		146
		147	Must be called after a fork in the child, before entering or continuing
		148	the event loop. An alternative is to use C<EV::FLAG_FORKCHECK> which calls
		149	this function automatically, at some performance loss (refer to the libev
		150	documentation).
		151
		152	=item $loop->loop_verify
		153
		154	Calls C<ev_verify> to make internal consistency checks (for debugging
		155	libev) and abort the program if any data structures were found to be
		156	corrupted.
		157
		158	=item $loop = EV::default_loop [$flags]
		159
		160	Return the default loop (which is a singleton object). Since this module
		161	already creates the default loop with default flags, specifying flags here
		162	will not have any effect unless you destroy the default loop first, which
		163	isn't supported. So in short: don't do it, and if you break it, you get to
		164	keep the pieces.
		165
		166	=back
		167
80		168
81	=head1 BASIC INTERFACE	169	=head1 BASIC INTERFACE
82		170
83	=over 4	171	=over 4
84		172
85	=item $EV::DIED	173	=item $EV::DIED
86		174
87	Must contain a reference to a function that is called when a callback	175	Must contain a reference to a function that is called when a callback
88	throws an exception (with $@ containing thr error). The default prints an	176	throws an exception (with $@ containing the error). The default prints an
89	informative message and continues.	177	informative message and continues.
90		178
91	If this callback throws an exception it will be silently ignored.	179	If this callback throws an exception it will be silently ignored.
92		180
		181	=item $flags = EV::supported_backends
		182
		183	=item $flags = EV::recommended_backends
		184
		185	=item $flags = EV::embeddable_backends
		186
		187	Returns the set (see C<EV::BACKEND_*> flags) of backends supported by this
		188	instance of EV, the set of recommended backends (supposed to be good) for
		189	this platform and the set of embeddable backends (see EMBED WATCHERS).
		190
		191	=item EV::sleep $seconds
		192
		193	Block the process for the given number of (fractional) seconds.
		194
93	=item $time = EV::time	195	=item $time = EV::time
94		196
95	Returns the current time in (fractional) seconds since the epoch.	197	Returns the current time in (fractional) seconds since the epoch.
96		198
97	=item $time = EV::now	199	=item $time = EV::now
98		200
		201	=item $time = $loop->now
		202
99	Returns the time the last event loop iteration has been started. This	203	Returns the time the last event loop iteration has been started. This
100	is the time that (relative) timers are based on, and refering to it is	204	is the time that (relative) timers are based on, and referring to it is
101	usually faster then calling EV::time.	205	usually faster then calling EV::time.
102		206
103	=item $method = EV::ev_method	207	=item EV::now_update
104		208
		209	=item $loop->now_update
		210
		211	Establishes the current time by querying the kernel, updating the time
		212	returned by C<EV::now> in the progress. This is a costly operation and
		213	is usually done automatically within C<EV::loop>.
		214
		215	This function is rarely useful, but when some event callback runs for a
		216	very long time without entering the event loop, updating libev's idea of
		217	the current time is a good idea.
		218
		219	=item EV::suspend
		220
		221	=item $loop->suspend
		222
		223	=item EV::resume
		224
		225	=item $loop->resume
		226
		227	These two functions suspend and resume a loop, for use when the loop is
		228	not used for a while and timeouts should not be processed.
		229
		230	A typical use case would be an interactive program such as a game: When
		231	the user presses C<^Z> to suspend the game and resumes it an hour later it
		232	would be best to handle timeouts as if no time had actually passed while
		233	the program was suspended. This can be achieved by calling C<suspend>
		234	in your C<SIGTSTP> handler, sending yourself a C<SIGSTOP> and calling
		235	C<resume> directly afterwards to resume timer processing.
		236
		237	Effectively, all C<timer> watchers will be delayed by the time spend
		238	between C<suspend> and C<resume>, and all C<periodic> watchers
		239	will be rescheduled (that is, they will lose any events that would have
		240	occured while suspended).
		241
		242	After calling C<suspend> you B<must not> call I<any> function on the given
		243	loop other than C<resume>, and you B<must not> call C<resume>
		244	without a previous call to C<suspend>.
		245
		246	Calling C<suspend>/C<resume> has the side effect of updating the event
		247	loop time (see C<now_update>).
		248
		249	=item $backend = EV::backend
		250
		251	=item $backend = $loop->backend
		252
105	Returns an integer describing the backend used by libev (EV::METHOD_SELECT	253	Returns an integer describing the backend used by libev (EV::BACKEND_SELECT
106	or EV::METHOD_EPOLL).	254	or EV::BACKEND_EPOLL).
107		255
108	=item EV::loop [$flags]	256	=item EV::loop [$flags]
109		257
		258	=item $loop->loop ([$flags])
		259
110	Begin checking for events and calling callbacks. It returns when a	260	Begin checking for events and calling callbacks. It returns when a
111	callback calls EV::loop_done.	261	callback calls EV::unloop.
112		262
113	The $flags argument can be one of the following:	263	The $flags argument can be one of the following:
114		264
115	0 as above	265	0 as above
116	EV::LOOP_ONESHOT block at most once (wait, but do not loop)	266	EV::LOOP_ONESHOT block at most once (wait, but do not loop)
117	EV::LOOP_NONBLOCK do not block at all (fetch/handle events but do not wait)	267	EV::LOOP_NONBLOCK do not block at all (fetch/handle events but do not wait)
118		268
119	=item EV::loop_done [$how]	269	=item EV::unloop [$how]
120		270
		271	=item $loop->unloop ([$how])
		272
121	When called with no arguments or an argument of 1, makes the innermost	273	When called with no arguments or an argument of EV::UNLOOP_ONE, makes the
122	call to EV::loop return.	274	innermost call to EV::loop return.
123		275
124	When called with an agrument of 2, all calls to EV::loop will return as	276	When called with an argument of EV::UNLOOP_ALL, all calls to EV::loop will return as
125	fast as possible.	277	fast as possible.
126		278
127	=back	279	=item $count = EV::loop_count
128		280
129	=head2 WATCHER	281	=item $count = $loop->loop_count
		282
		283	Return the number of times the event loop has polled for new
		284	events. Sometimes useful as a generation counter.
		285
		286	=item EV::once $fh_or_undef, $events, $timeout, $cb->($revents)
		287
		288	=item $loop->once ($fh_or_undef, $events, $timeout, $cb->($revents))
		289
		290	This function rolls together an I/O and a timer watcher for a single
		291	one-shot event without the need for managing a watcher object.
		292
		293	If C<$fh_or_undef> is a filehandle or file descriptor, then C<$events>
		294	must be a bitset containing either C<EV::READ>, C<EV::WRITE> or C<EV::READ
		295	\| EV::WRITE>, indicating the type of I/O event you want to wait for. If
		296	you do not want to wait for some I/O event, specify C<undef> for
		297	C<$fh_or_undef> and C<0> for C<$events>).
		298
		299	If timeout is C<undef> or negative, then there will be no
		300	timeout. Otherwise a EV::timer with this value will be started.
		301
		302	When an error occurs or either the timeout or I/O watcher triggers, then
		303	the callback will be called with the received event set (in general
		304	you can expect it to be a combination of C<EV::ERROR>, C<EV::READ>,
		305	C<EV::WRITE> and C<EV::TIMEOUT>).
		306
		307	EV::once doesn't return anything: the watchers stay active till either
		308	of them triggers, then they will be stopped and freed, and the callback
		309	invoked.
		310
		311	=item EV::feed_fd_event ($fd, $revents)
		312
		313	=item $loop->feed_fd_event ($fd, $revents)
		314
		315	Feed an event on a file descriptor into EV. EV will react to this call as
		316	if the readyness notifications specified by C<$revents> (a combination of
		317	C<EV::READ> and C<EV::WRITE>) happened on the file descriptor C<$fd>.
		318
		319	=item EV::feed_signal_event ($signal)
		320
		321	Feed a signal event into EV. EV will react to this call as if the signal
		322	specified by C<$signal> had occured.
		323
		324	=item EV::set_io_collect_interval $time
		325
		326	=item $loop->set_io_collect_interval ($time)
		327
		328	=item EV::set_timeout_collect_interval $time
		329
		330	=item $loop->set_timeout_collect_interval ($time)
		331
		332	These advanced functions set the minimum block interval when polling for I/O events and the minimum
		333	wait interval for timer events. See the libev documentation at
		334	L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod#FUNCTIONS_CONTROLLING_THE_EVENT_LOOP>
		335	(locally installed as F<EV::libev>) for a more detailed discussion.
		336
		337	=back
		338
		339
		340	=head1 WATCHER OBJECTS
130		341
131	A watcher is an object that gets created to record your interest in some	342	A watcher is an object that gets created to record your interest in some
132	event. For instance, if you want to wait for STDIN to become readable, you	343	event. For instance, if you want to wait for STDIN to become readable, you
133	would create an EV::io watcher for that:	344	would create an EV::io watcher for that:
134		345
135	my $watcher = EV::io *STDIN, EV::READ, sub {	346	my $watcher = EV::io *STDIN, EV::READ, sub {
136	my ($watcher, $revents) = @_;	347	my ($watcher, $revents) = @_;
137	warn "yeah, STDIN should not be readable without blocking!\n"	348	warn "yeah, STDIN should now be readable without blocking!\n"
138	};	349	};
139		350
140	All watchers can be active (waiting for events) or inactive (paused). Only	351	All watchers can be active (waiting for events) or inactive (paused). Only
141	active watchers will have their callbacks invoked. All callbacks will be	352	active watchers will have their callbacks invoked. All callbacks will be
142	called with at least two arguments: the watcher and a bitmask of received	353	called with at least two arguments: the watcher and a bitmask of received
143	events.	354	events.
144		355
145	Each watcher type has its associated bit in revents, so you can use the	356	Each watcher type has its associated bit in revents, so you can use the
146	same callback for multiple watchers. The event mask is named after the	357	same callback for multiple watchers. The event mask is named after the
147	type, i..e. EV::child sets EV::CHILD, EV::prepare sets EV::PREPARE,	358	type, i.e. EV::child sets EV::CHILD, EV::prepare sets EV::PREPARE,
148	EV::periodic sets EV::PERIODIC and so on, with the exception of IO events	359	EV::periodic sets EV::PERIODIC and so on, with the exception of I/O events
149	(which can set both EV::READ and EV::WRITE bits), and EV::timer (which	360	(which can set both EV::READ and EV::WRITE bits), and EV::timer (which
150	uses EV::TIMEOUT).	361	uses EV::TIMEOUT).
151		362
152	In the rare case where one wants to create a watcher but not start it at	363	In the rare case where one wants to create a watcher but not start it at
153	the same time, each constructor has a variant with a trailing C<_ns> in	364	the same time, each constructor has a variant with a trailing C<_ns> in
…		…
159		370
160	Also, all methods changing some aspect of a watcher (->set, ->priority,	371	Also, all methods changing some aspect of a watcher (->set, ->priority,
161	->fh and so on) automatically stop and start it again if it is active,	372	->fh and so on) automatically stop and start it again if it is active,
162	which means pending events get lost.	373	which means pending events get lost.
163		374
164	=head2 WATCHER TYPES	375	=head2 COMMON WATCHER METHODS
165		376
166	Now lets move to the existing watcher types and asociated methods.	377	This section lists methods common to all watchers.
167
168	The following methods are available for all watchers. Then followes a
169	description of each watcher constructor (EV::io, EV::timer, EV::periodic,
170	EV::signal, EV::child, EV::idle, EV::prepare and EV::check), followed by
171	any type-specific methods (if any).
172		378
173	=over 4	379	=over 4
174		380
175	=item $w->start	381	=item $w->start
176		382
…		…
180		386
181	=item $w->stop	387	=item $w->stop
182		388
183	Stop a watcher if it is active. Also clear any pending events (events that	389	Stop a watcher if it is active. Also clear any pending events (events that
184	have been received but that didn't yet result in a callback invocation),	390	have been received but that didn't yet result in a callback invocation),
185	regardless of wether the watcher was active or not.	391	regardless of whether the watcher was active or not.
186		392
187	=item $bool = $w->is_active	393	=item $bool = $w->is_active
188		394
189	Returns true if the watcher is active, false otherwise.	395	Returns true if the watcher is active, false otherwise.
190		396
…		…
215	watchers with higher priority will be invoked first. The valid range of	421	watchers with higher priority will be invoked first. The valid range of
216	priorities lies between EV::MAXPRI (default 2) and EV::MINPRI (default	422	priorities lies between EV::MAXPRI (default 2) and EV::MINPRI (default
217	-2). If the priority is outside this range it will automatically be	423	-2). If the priority is outside this range it will automatically be
218	normalised to the nearest valid priority.	424	normalised to the nearest valid priority.
219		425
220	The default priority of any newly-created weatcher is 0.	426	The default priority of any newly-created watcher is 0.
221		427
		428	Note that the priority semantics have not yet been fleshed out and are
		429	subject to almost certain change.
		430
222	=item $w->trigger ($revents)	431	=item $w->invoke ($revents)
223		432
224	Call the callback now with the given event mask.	433	Call the callback now with the given event mask.
225		434
		435	=item $w->feed_event ($revents)
		436
		437	Feed some events on this watcher into EV. EV will react to this call as if
		438	the watcher had received the given C<$revents> mask.
		439
		440	=item $revents = $w->clear_pending
		441
		442	If the watcher is pending, this function clears its pending status and
		443	returns its C<$revents> bitset (as if its callback was invoked). If the
		444	watcher isn't pending it does nothing and returns C<0>.
		445
		446	=item $previous_state = $w->keepalive ($bool)
		447
		448	Normally, C<EV::loop> will return when there are no active watchers
		449	(which is a "deadlock" because no progress can be made anymore). This is
		450	convinient because it allows you to start your watchers (and your jobs),
		451	call C<EV::loop> once and when it returns you know that all your jobs are
		452	finished (or they forgot to register some watchers for their task :).
		453
		454	Sometimes, however, this gets in your way, for example when the module
		455	that calls C<EV::loop> (usually the main program) is not the same module
		456	as a long-living watcher (for example a DNS client module written by
		457	somebody else even). Then you might want any outstanding requests to be
		458	handled, but you would not want to keep C<EV::loop> from returning just
		459	because you happen to have this long-running UDP port watcher.
		460
		461	In this case you can clear the keepalive status, which means that even
		462	though your watcher is active, it won't keep C<EV::loop> from returning.
		463
		464	The initial value for keepalive is true (enabled), and you can change it
		465	any time.
		466
		467	Example: Register an I/O watcher for some UDP socket but do not keep the
		468	event loop from running just because of that watcher.
		469
		470	my $udp_socket = ...
		471	my $udp_watcher = EV::io $udp_socket, EV::READ, sub { ... };
		472	$udp_watcher->keepalive (0);
		473
		474	=item $loop = $w->loop
		475
		476	Return the loop that this watcher is attached to.
		477
		478	=back
		479
		480
		481	=head1 WATCHER TYPES
		482
		483	Each of the following subsections describes a single watcher type.
		484
		485	=head3 I/O WATCHERS - is this file descriptor readable or writable?
		486
		487	=over 4
226		488
227	=item $w = EV::io $fileno_or_fh, $eventmask, $callback	489	=item $w = EV::io $fileno_or_fh, $eventmask, $callback
228		490
229	=item $w = EV::io_ns $fileno_or_fh, $eventmask, $callback	491	=item $w = EV::io_ns $fileno_or_fh, $eventmask, $callback
230		492
		493	=item $w = $loop->io ($fileno_or_fh, $eventmask, $callback)
		494
		495	=item $w = $loop->io_ns ($fileno_or_fh, $eventmask, $callback)
		496
231	As long as the returned watcher object is alive, call the C<$callback>	497	As long as the returned watcher object is alive, call the C<$callback>
232	when the events specified in C<$eventmask>.	498	when at least one of events specified in C<$eventmask> occurs.
233		499
234	The $eventmask can be one or more of these constants ORed together:	500	The $eventmask can be one or more of these constants ORed together:
235		501
236	EV::READ wait until read() wouldn't block anymore	502	EV::READ wait until read() wouldn't block anymore
237	EV::WRITE wait until write() wouldn't block anymore	503	EV::WRITE wait until write() wouldn't block anymore
…		…
253		519
254	=item $old_eventmask = $w->events ($new_eventmask)	520	=item $old_eventmask = $w->events ($new_eventmask)
255		521
256	Returns the previously set event mask and optionally set a new one.	522	Returns the previously set event mask and optionally set a new one.
257		523
		524	=back
		525
		526
		527	=head3 TIMER WATCHERS - relative and optionally repeating timeouts
		528
		529	=over 4
258		530
259	=item $w = EV::timer $after, $repeat, $callback	531	=item $w = EV::timer $after, $repeat, $callback
260		532
261	=item $w = EV::timer_ns $after, $repeat, $callback	533	=item $w = EV::timer_ns $after, $repeat, $callback
262		534
263	Calls the callback after C<$after> seconds. If C<$repeat> is non-zero,	535	=item $w = $loop->timer ($after, $repeat, $callback)
264	the timer will be restarted (with the $repeat value as $after) after the	536
265	callback returns.	537	=item $w = $loop->timer_ns ($after, $repeat, $callback)
		538
		539	Calls the callback after C<$after> seconds (which may be fractional). If
		540	C<$repeat> is non-zero, the timer will be restarted (with the $repeat
		541	value as $after) after the callback returns.
266		542
267	This means that the callback would be called roughly after C<$after>	543	This means that the callback would be called roughly after C<$after>
268	seconds, and then every C<$repeat> seconds. "Roughly" because the time of	544	seconds, and then every C<$repeat> seconds. The timer does his best not
269	callback processing is not taken into account, so the timer will slowly	545	to drift, but it will not invoke the timer more often then once per event
270	drift. If that isn't acceptable, look at EV::periodic.	546	loop iteration, and might drift in other cases. If that isn't acceptable,
		547	look at EV::periodic, which can provide long-term stable timers.
271		548
272	The timer is based on a monotonic clock, that is if somebody is sitting	549	The timer is based on a monotonic clock, that is, if somebody is sitting
273	in front of the machine while the timer is running and changes the system	550	in front of the machine while the timer is running and changes the system
274	clock, the timer will nevertheless run (roughly) the same time.	551	clock, the timer will nevertheless run (roughly) the same time.
275		552
276	The C<timer_ns> variant doesn't start (activate) the newly created watcher.	553	The C<timer_ns> variant doesn't start (activate) the newly created watcher.
277		554
278	=item $w->set ($after, $repeat)	555	=item $w->set ($after, $repeat)
279		556
280	Reconfigures the watcher, see the constructor above for details. Can be at	557	Reconfigures the watcher, see the constructor above for details. Can be called at
281	any time.	558	any time.
282		559
283	=item $w->again	560	=item $w->again
284		561
285	Similar to the C<start> method, but has special semantics for repeating timers:	562	Similar to the C<start> method, but has special semantics for repeating timers:
		563
		564	If the timer is active and non-repeating, it will be stopped.
286		565
287	If the timer is active and repeating, reset the timeout to occur	566	If the timer is active and repeating, reset the timeout to occur
288	C<$repeat> seconds after now.	567	C<$repeat> seconds after now.
289		568
290	If the timer is active and non-repeating, it will be stopped.
291
292	If the timer is in active and repeating, start it.	569	If the timer is inactive and repeating, start it using the repeat value.
293		570
294	Otherwise do nothing.	571	Otherwise do nothing.
295		572
296	This behaviour is useful when you have a timeout for some IO	573	This behaviour is useful when you have a timeout for some IO
297	operation. You create a timer object with the same value for C<$after> and	574	operation. You create a timer object with the same value for C<$after> and
298	C<$repeat>, and then, in the read/write watcher, run the C<again> method	575	C<$repeat>, and then, in the read/write watcher, run the C<again> method
299	on the timeout.	576	on the timeout.
300		577
		578	=back
		579
		580
		581	=head3 PERIODIC WATCHERS - to cron or not to cron?
		582
		583	=over 4
301		584
302	=item $w = EV::periodic $at, $interval, $reschedule_cb, $callback	585	=item $w = EV::periodic $at, $interval, $reschedule_cb, $callback
303		586
304	=item $w = EV::periodic_ns $at, $interval, $reschedule_cb, $callback	587	=item $w = EV::periodic_ns $at, $interval, $reschedule_cb, $callback
		588
		589	=item $w = $loop->periodic ($at, $interval, $reschedule_cb, $callback)
		590
		591	=item $w = $loop->periodic_ns ($at, $interval, $reschedule_cb, $callback)
305		592
306	Similar to EV::timer, but is not based on relative timeouts but on	593	Similar to EV::timer, but is not based on relative timeouts but on
307	absolute times. Apart from creating "simple" timers that trigger "at" the	594	absolute times. Apart from creating "simple" timers that trigger "at" the
308	specified time, it can also be used for non-drifting absolute timers and	595	specified time, it can also be used for non-drifting absolute timers and
309	more complex, cron-like, setups that are not adversely affected by time	596	more complex, cron-like, setups that are not adversely affected by time
…		…
319	This time simply fires at the wallclock time C<$at> and doesn't repeat. It	606	This time simply fires at the wallclock time C<$at> and doesn't repeat. It
320	will not adjust when a time jump occurs, that is, if it is to be run	607	will not adjust when a time jump occurs, that is, if it is to be run
321	at January 1st 2011 then it will run when the system time reaches or	608	at January 1st 2011 then it will run when the system time reaches or
322	surpasses this time.	609	surpasses this time.
323		610
324	=item * non-repeating interval timer ($interval > 0, $reschedule_cb = 0)	611	=item * repeating interval timer ($interval > 0, $reschedule_cb = 0)
325		612
326	In this mode the watcher will always be scheduled to time out at the	613	In this mode the watcher will always be scheduled to time out at the
327	next C<$at + N * $interval> time (for some integer N) and then repeat,	614	next C<$at + N * $interval> time (for some integer N) and then repeat,
328	regardless of any time jumps.	615	regardless of any time jumps.
329		616
…		…
341	possible time where C<$time = $at (mod $interval)>, regardless of any time	628	possible time where C<$time = $at (mod $interval)>, regardless of any time
342	jumps.	629	jumps.
343		630
344	=item * manual reschedule mode ($reschedule_cb = coderef)	631	=item * manual reschedule mode ($reschedule_cb = coderef)
345		632
346	In this mode $interval and $at are both being ignored. Instead, each time	633	In this mode $interval and $at are both being ignored. Instead, each
347	the periodic watcher gets scheduled, the first callback ($reschedule_cb)	634	time the periodic watcher gets scheduled, the reschedule callback
348	will be called with the watcher as first, and the current time as second	635	($reschedule_cb) will be called with the watcher as first, and the current
349	argument.	636	time as second argument.
350		637
351	I<This callback MUST NOT stop or destroy this or any other periodic	638	I<This callback MUST NOT stop or destroy this or any other periodic
352	watcher, ever>. If you need to stop it, return 1e30 and stop it	639	watcher, ever, and MUST NOT call any event loop functions or methods>. If
353	afterwards.	640	you need to stop it, return 1e30 and stop it afterwards. You may create
		641	and start a C<EV::prepare> watcher for this task.
354		642
355	It must return the next time to trigger, based on the passed time value	643	It must return the next time to trigger, based on the passed time value
356	(that is, the lowest time value larger than to the second argument). It	644	(that is, the lowest time value larger than or equal to to the second
357	will usually be called just before the callback will be triggered, but	645	argument). It will usually be called just before the callback will be
358	might be called at other times, too.	646	triggered, but might be called at other times, too.
359		647
360	This can be used to create very complex timers, such as a timer that	648	This can be used to create very complex timers, such as a timer that
361	triggers on each midnight, local time (actually 24 hours after the last	649	triggers on each midnight, local time (actually 24 hours after the last
362	midnight, to keep the example simple. If you know a way to do it correctly	650	midnight, to keep the example simple. If you know a way to do it correctly
363	in about the same space (without requiring elaborate modules), drop me a	651	in about the same space (without requiring elaborate modules), drop me a
…		…
377		665
378	The C<periodic_ns> variant doesn't start (activate) the newly created watcher.	666	The C<periodic_ns> variant doesn't start (activate) the newly created watcher.
379		667
380	=item $w->set ($at, $interval, $reschedule_cb)	668	=item $w->set ($at, $interval, $reschedule_cb)
381		669
382	Reconfigures the watcher, see the constructor above for details. Can be at	670	Reconfigures the watcher, see the constructor above for details. Can be called at
383	any time.	671	any time.
384		672
385	=item $w->again	673	=item $w->again
386		674
387	Simply stops and starts the watcher again.	675	Simply stops and starts the watcher again.
388		676
		677	=item $time = $w->at
		678
		679	Return the time that the watcher is expected to trigger next.
		680
		681	=back
		682
		683
		684	=head3 SIGNAL WATCHERS - signal me when a signal gets signalled!
		685
		686	=over 4
389		687
390	=item $w = EV::signal $signal, $callback	688	=item $w = EV::signal $signal, $callback
391		689
392	=item $w = EV::signal_ns $signal, $callback	690	=item $w = EV::signal_ns $signal, $callback
393		691
394	Call the callback when $signal is received (the signal can be specified	692	Call the callback when $signal is received (the signal can be specified by
395	by number or by name, just as with kill or %SIG).	693	number or by name, just as with C<kill> or C<%SIG>).
396		694
397	EV will grab the signal for the process (the kernel only allows one	695	EV will grab the signal for the process (the kernel only allows one
398	component to receive a signal at a time) when you start a signal watcher,	696	component to receive a signal at a time) when you start a signal watcher,
399	and removes it again when you stop it. Perl does the same when you	697	and removes it again when you stop it. Perl does the same when you
400	add/remove callbacks to %SIG, so watch out.	698	add/remove callbacks to C<%SIG>, so watch out.
401		699
402	You can have as many signal watchers per signal as you want.	700	You can have as many signal watchers per signal as you want.
403		701
404	The C<signal_ns> variant doesn't start (activate) the newly created watcher.	702	The C<signal_ns> variant doesn't start (activate) the newly created watcher.
405		703
406	=item $w->set ($signal)	704	=item $w->set ($signal)
407		705
408	Reconfigures the watcher, see the constructor above for details. Can be at	706	Reconfigures the watcher, see the constructor above for details. Can be
409	any time.	707	called at any time.
410		708
411	=item $current_signum = $w->signal	709	=item $current_signum = $w->signal
412		710
413	=item $old_signum = $w->signal ($new_signal)	711	=item $old_signum = $w->signal ($new_signal)
414		712
415	Returns the previously set signal (always as a number not name) and	713	Returns the previously set signal (always as a number not name) and
416	optionally set a new one.	714	optionally set a new one.
417		715
		716	=back
418		717
		718
		719	=head3 CHILD WATCHERS - watch out for process status changes
		720
		721	=over 4
		722
419	=item $w = EV::child $pid, $callback	723	=item $w = EV::child $pid, $trace, $callback
420		724
421	=item $w = EV::child_ns $pid, $callback	725	=item $w = EV::child_ns $pid, $trace, $callback
		726
		727	=item $w = $loop->child ($pid, $trace, $callback)
		728
		729	=item $w = $loop->child_ns ($pid, $trace, $callback)
422		730
423	Call the callback when a status change for pid C<$pid> (or any pid	731	Call the callback when a status change for pid C<$pid> (or any pid
424	if C<$pid> is 0) has been received. More precisely: when the process	732	if C<$pid> is 0) has been received (a status change happens when the
		733	process terminates or is killed, or, when trace is true, additionally when
		734	it is stopped or continued). More precisely: when the process receives
425	receives a SIGCHLD, EV will fetch the outstanding exit/wait status for all	735	a C<SIGCHLD>, EV will fetch the outstanding exit/wait status for all
426	changed/zombie children and call the callback.	736	changed/zombie children and call the callback.
427		737
428	You can access both status and pid by using the C<rstatus> and C<rpid>	738	It is valid (and fully supported) to install a child watcher after a child
429	methods on the watcher object.	739	has exited but before the event loop has started its next iteration (for
		740	example, first you C<fork>, then the new child process might exit, and
		741	only then do you install a child watcher in the parent for the new pid).
430		742
		743	You can access both exit (or tracing) status and pid by using the
		744	C<rstatus> and C<rpid> methods on the watcher object.
		745
431	You can have as many pid watchers per pid as you want.	746	You can have as many pid watchers per pid as you want, they will all be
		747	called.
432		748
433	The C<child_ns> variant doesn't start (activate) the newly created watcher.	749	The C<child_ns> variant doesn't start (activate) the newly created watcher.
434		750
435	=item $w->set ($pid)	751	=item $w->set ($pid, $trace)
436		752
437	Reconfigures the watcher, see the constructor above for details. Can be at	753	Reconfigures the watcher, see the constructor above for details. Can be called at
438	any time.	754	any time.
439		755
440	=item $current_pid = $w->pid	756	=item $current_pid = $w->pid
441
442	=item $old_pid = $w->pid ($new_pid)
443		757
444	Returns the previously set process id and optionally set a new one.	758	Returns the previously set process id and optionally set a new one.
445		759
446	=item $exit_status = $w->rstatus	760	=item $exit_status = $w->rstatus
447		761
…		…
451	=item $pid = $w->rpid	765	=item $pid = $w->rpid
452		766
453	Return the pid of the awaited child (useful when you have installed a	767	Return the pid of the awaited child (useful when you have installed a
454	watcher for all pids).	768	watcher for all pids).
455		769
		770	=back
		771
		772
		773	=head3 STAT WATCHERS - did the file attributes just change?
		774
		775	=over 4
		776
		777	=item $w = EV::stat $path, $interval, $callback
		778
		779	=item $w = EV::stat_ns $path, $interval, $callback
		780
		781	=item $w = $loop->stat ($path, $interval, $callback)
		782
		783	=item $w = $loop->stat_ns ($path, $interval, $callback)
		784
		785	Call the callback when a file status change has been detected on
		786	C<$path>. The C<$path> does not need to exist, changing from "path exists"
		787	to "path does not exist" is a status change like any other.
		788
		789	The C<$interval> is a recommended polling interval for systems where
		790	OS-supported change notifications don't exist or are not supported. If
		791	you use C<0> then an unspecified default is used (which is highly
		792	recommended!), which is to be expected to be around five seconds usually.
		793
		794	This watcher type is not meant for massive numbers of stat watchers,
		795	as even with OS-supported change notifications, this can be
		796	resource-intensive.
		797
		798	The C<stat_ns> variant doesn't start (activate) the newly created watcher.
		799
		800	=item ... = $w->stat
		801
		802	This call is very similar to the perl C<stat> built-in: It stats (using
		803	C<lstat>) the path specified in the watcher and sets perls stat cache (as
		804	well as EV's idea of the current stat values) to the values found.
		805
		806	In scalar context, a boolean is return indicating success or failure of
		807	the stat. In list context, the same 13-value list as with stat is returned
		808	(except that the blksize and blocks fields are not reliable).
		809
		810	In the case of an error, errno is set to C<ENOENT> (regardless of the
		811	actual error value) and the C<nlink> value is forced to zero (if the stat
		812	was successful then nlink is guaranteed to be non-zero).
		813
		814	See also the next two entries for more info.
		815
		816	=item ... = $w->attr
		817
		818	Just like C<< $w->stat >>, but without the initial stat'ing: this returns
		819	the values most recently detected by EV. See the next entry for more info.
		820
		821	=item ... = $w->prev
		822
		823	Just like C<< $w->stat >>, but without the initial stat'ing: this returns
		824	the previous set of values, before the change.
		825
		826	That is, when the watcher callback is invoked, C<< $w->prev >> will be set
		827	to the values found I<before> a change was detected, while C<< $w->attr >>
		828	returns the values found leading to the change detection. The difference (if any)
		829	between C<prev> and C<attr> is what triggered the callback.
		830
		831	If you did something to the filesystem object and do not want to trigger
		832	yet another change, you can call C<stat> to update EV's idea of what the
		833	current attributes are.
		834
		835	=item $w->set ($path, $interval)
		836
		837	Reconfigures the watcher, see the constructor above for details. Can be
		838	called at any time.
		839
		840	=item $current_path = $w->path
		841
		842	=item $old_path = $w->path ($new_path)
		843
		844	Returns the previously set path and optionally set a new one.
		845
		846	=item $current_interval = $w->interval
		847
		848	=item $old_interval = $w->interval ($new_interval)
		849
		850	Returns the previously set interval and optionally set a new one. Can be
		851	used to query the actual interval used.
		852
		853	=back
		854
		855
		856	=head3 IDLE WATCHERS - when you've got nothing better to do...
		857
		858	=over 4
456		859
457	=item $w = EV::idle $callback	860	=item $w = EV::idle $callback
458		861
459	=item $w = EV::idle_ns $callback	862	=item $w = EV::idle_ns $callback
460		863
461	Call the callback when there are no pending io, timer/periodic, signal or	864	=item $w = $loop->idle ($callback)
462	child events, i.e. when the process is idle.	865
		866	=item $w = $loop->idle_ns ($callback)
		867
		868	Call the callback when there are no other pending watchers of the same or
		869	higher priority (excluding check, prepare and other idle watchers of the
		870	same or lower priority, of course). They are called idle watchers because
		871	when the watcher is the highest priority pending event in the process, the
		872	process is considered to be idle at that priority.
		873
		874	If you want a watcher that is only ever called when I<no> other events are
		875	outstanding you have to set the priority to C<EV::MINPRI>.
463		876
464	The process will not block as long as any idle watchers are active, and	877	The process will not block as long as any idle watchers are active, and
465	they will be called repeatedly until stopped.	878	they will be called repeatedly until stopped.
466		879
		880	For example, if you have idle watchers at priority C<0> and C<1>, and
		881	an I/O watcher at priority C<0>, then the idle watcher at priority C<1>
		882	and the I/O watcher will always run when ready. Only when the idle watcher
		883	at priority C<1> is stopped and the I/O watcher at priority C<0> is not
		884	pending with the C<0>-priority idle watcher be invoked.
		885
467	The C<idle_ns> variant doesn't start (activate) the newly created watcher.	886	The C<idle_ns> variant doesn't start (activate) the newly created watcher.
468		887
		888	=back
		889
		890
		891	=head3 PREPARE WATCHERS - customise your event loop!
		892
		893	=over 4
469		894
470	=item $w = EV::prepare $callback	895	=item $w = EV::prepare $callback
471		896
472	=item $w = EV::prepare_ns $callback	897	=item $w = EV::prepare_ns $callback
		898
		899	=item $w = $loop->prepare ($callback)
		900
		901	=item $w = $loop->prepare_ns ($callback)
473		902
474	Call the callback just before the process would block. You can still	903	Call the callback just before the process would block. You can still
475	create/modify any watchers at this point.	904	create/modify any watchers at this point.
476		905
477	See the EV::check watcher, below, for explanations and an example.	906	See the EV::check watcher, below, for explanations and an example.
478		907
479	The C<prepare_ns> variant doesn't start (activate) the newly created watcher.	908	The C<prepare_ns> variant doesn't start (activate) the newly created watcher.
480		909
		910	=back
		911
		912
		913	=head3 CHECK WATCHERS - customise your event loop even more!
		914
		915	=over 4
481		916
482	=item $w = EV::check $callback	917	=item $w = EV::check $callback
483		918
484	=item $w = EV::check_ns $callback	919	=item $w = EV::check_ns $callback
		920
		921	=item $w = $loop->check ($callback)
		922
		923	=item $w = $loop->check_ns ($callback)
485		924
486	Call the callback just after the process wakes up again (after it has	925	Call the callback just after the process wakes up again (after it has
487	gathered events), but before any other callbacks have been invoked.	926	gathered events), but before any other callbacks have been invoked.
488		927
489	This is used to integrate other event-based software into the EV	928	This is used to integrate other event-based software into the EV
…		…
497	# do nothing unless active	936	# do nothing unless active
498	$dispatcher->{_event_queue_h}	937	$dispatcher->{_event_queue_h}
499	or return;	938	or return;
500		939
501	# make the dispatcher handle any outstanding stuff	940	# make the dispatcher handle any outstanding stuff
		941	... not shown
502		942
503	# create an IO watcher for each and every socket	943	# create an I/O watcher for each and every socket
504	@snmp_watcher = (	944	@snmp_watcher = (
505	(map { EV::io $_, EV::READ, sub { } }	945	(map { EV::io $_, EV::READ, sub { } }
506	keys %{ $dispatcher->{_descriptors} }),	946	keys %{ $dispatcher->{_descriptors} }),
		947
		948	EV::timer +($event->[Net::SNMP::Dispatcher::_ACTIVE]
		949	? $event->[Net::SNMP::Dispatcher::_TIME] - EV::now : 0),
		950	0, sub { },
507	);	951	);
508
509	# if there are any timeouts, also create a timer
510	push @snmp_watcher, EV::timer $event->[Net::SNMP::Dispatcher::_TIME] - EV::now, 0, sub { }
511	if $event->[Net::SNMP::Dispatcher::_ACTIVE];
512	};	952	};
513		953
514	The callbacks are irrelevant, the only purpose of those watchers is	954	The callbacks are irrelevant (and are not even being called), the
515	to wake up the process as soon as one of those events occurs (socket	955	only purpose of those watchers is to wake up the process as soon as
516	readable, or timer timed out). The corresponding EV::check watcher will then	956	one of those events occurs (socket readable, or timer timed out). The
517	clean up:	957	corresponding EV::check watcher will then clean up:
518		958
519	our $snmp_check = EV::check sub {	959	our $snmp_check = EV::check sub {
520	# destroy all watchers	960	# destroy all watchers
521	@snmp_watcher = ();	961	@snmp_watcher = ();
522		962
523	# make the dispatcher handle any new stuff	963	# make the dispatcher handle any new stuff
		964	... not shown
524	};	965	};
525		966
526	The callbacks of the created watchers will not be called as the watchers	967	The callbacks of the created watchers will not be called as the watchers
527	are destroyed before this cna happen (remember EV::check gets called	968	are destroyed before this can happen (remember EV::check gets called
528	first).	969	first).
529		970
530	The C<check_ns> variant doesn't start (activate) the newly created watcher.	971	The C<check_ns> variant doesn't start (activate) the newly created watcher.
531		972
532	=back	973	=back
533		974
		975
		976	=head3 FORK WATCHERS - the audacity to resume the event loop after a fork
		977
		978	Fork watchers are called when a C<fork ()> was detected. The invocation
		979	is done before the event loop blocks next and before C<check> watchers
		980	are being called, and only in the child after the fork.
		981
		982	=over 4
		983
		984	=item $w = EV::fork $callback
		985
		986	=item $w = EV::fork_ns $callback
		987
		988	=item $w = $loop->fork ($callback)
		989
		990	=item $w = $loop->fork_ns ($callback)
		991
		992	Call the callback before the event loop is resumed in the child process
		993	after a fork.
		994
		995	The C<fork_ns> variant doesn't start (activate) the newly created watcher.
		996
		997	=back
		998
		999
		1000	=head3 EMBED WATCHERS - when one backend isn't enough...
		1001
		1002	This is a rather advanced watcher type that lets you embed one event loop
		1003	into another (currently only IO events are supported in the embedded
		1004	loop, other types of watchers might be handled in a delayed or incorrect
		1005	fashion and must not be used).
		1006
		1007	See the libev documentation at
		1008	L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod#code_ev_embed_code_when_one_backend_>
		1009	(locally installed as F<EV::libev>) for more details.
		1010
		1011	In short, this watcher is most useful on BSD systems without working
		1012	kqueue to still be able to handle a large number of sockets:
		1013
		1014	my $socket_loop;
		1015
		1016	# check wether we use SELECT or POLL _and_ KQUEUE is supported
		1017	if (
		1018	(EV::backend & (EV::BACKEND_POLL \| EV::BACKEND_SELECT))
		1019	&& (EV::supported_backends & EV::embeddable_backends & EV::BACKEND_KQUEUE)
		1020	) {
		1021	# use kqueue for sockets
		1022	$socket_loop = new EV::Loop EV::BACKEND_KQUEUE \| EV::FLAG_NOENV;
		1023	}
		1024
		1025	# use the default loop otherwise
		1026	$socket_loop \|\|= EV::default_loop;
		1027
		1028	=over 4
		1029
		1030	=item $w = EV::embed $otherloop[, $callback]
		1031
		1032	=item $w = EV::embed_ns $otherloop[, $callback]
		1033
		1034	=item $w = $loop->embed ($otherloop[, $callback])
		1035
		1036	=item $w = $loop->embed_ns ($otherloop[, $callback])
		1037
		1038	Call the callback when the embedded event loop (C<$otherloop>) has any
		1039	I/O activity. The C<$callback> is optional: if it is missing, then the
		1040	embedded event loop will be managed automatically (which is recommended),
		1041	otherwise you have to invoke C<sweep> yourself.
		1042
		1043	The C<embed_ns> variant doesn't start (activate) the newly created watcher.
		1044
		1045	=back
		1046
		1047	=head3 ASYNC WATCHERS - how to wake up another event loop
		1048
		1049	Async watchers are provided by EV, but have little use in perl directly, as perl
		1050	neither supports threads nor direct access to signal handlers or other
		1051	contexts where they could be of value.
		1052
		1053	It is, however, possible to use them from the XS level.
		1054
		1055	Please see the libev documentation for further details.
		1056
		1057	=over 4
		1058
		1059	=item $w = EV::async $callback
		1060
		1061	=item $w = EV::async_ns $callback
		1062
		1063	=item $w->send
		1064
		1065	=item $bool = $w->async_pending
		1066
		1067	=back
		1068
		1069
		1070	=head1 PERL SIGNALS
		1071
		1072	While Perl signal handling (C<%SIG>) is not affected by EV, the behaviour
		1073	with EV is as the same as any other C library: Perl-signals will only be
		1074	handled when Perl runs, which means your signal handler might be invoked
		1075	only the next time an event callback is invoked.
		1076
		1077	The solution is to use EV signal watchers (see C<EV::signal>), which will
		1078	ensure proper operations with regards to other event watchers.
		1079
		1080	If you cannot do this for whatever reason, you can also force a watcher
		1081	to be called on every event loop iteration by installing a C<EV::check>
		1082	watcher:
		1083
		1084	my $async_check = EV::check sub { };
		1085
		1086	This ensures that perl gets into control for a short time to handle any
		1087	pending signals, and also ensures (slightly) slower overall operation.
		1088
534	=head1 THREADS	1089	=head1 THREADS
535		1090
536	Threads are not supported by this in any way. Perl pseudo-threads is evil	1091	Threads are not supported by this module in any way. Perl pseudo-threads
537	stuff and must die.	1092	is evil stuff and must die. As soon as Perl gains real threads I will work
		1093	on thread support for it.
		1094
		1095	=head1 FORK
		1096
		1097	Most of the "improved" event delivering mechanisms of modern operating
		1098	systems have quite a few problems with fork(2) (to put it bluntly: it is
		1099	not supported and usually destructive). Libev makes it possible to work
		1100	around this by having a function that recreates the kernel state after
		1101	fork in the child.
		1102
		1103	On non-win32 platforms, this module requires the pthread_atfork
		1104	functionality to do this automatically for you. This function is quite
		1105	buggy on most BSDs, though, so YMMV. The overhead for this is quite
		1106	negligible, because everything the function currently does is set a flag
		1107	that is checked only when the event loop gets used the next time, so when
		1108	you do fork but not use EV, the overhead is minimal.
		1109
		1110	On win32, there is no notion of fork so all this doesn't apply, of course.
538		1111
539	=cut	1112	=cut
540		1113
541	our $DIED = sub {	1114	our $DIED = sub {
542	warn "EV: error in callback (ignoring): $@";	1115	warn "EV: error in callback (ignoring): $@";
543	};	1116	};
544		1117
545	default_loop	1118	default_loop
546	or die 'EV: cannot initialise libev backend. bad $ENV{LIBEV_METHODS}?';	1119	or die 'EV: cannot initialise libev backend. bad $ENV{LIBEV_FLAGS}?';
547		1120
548	1;	1121	1;
549		1122
550	=head1 SEE ALSO	1123	=head1 SEE ALSO
551		1124
552	L<EV::DNS>, L<EV::AnyEvent>.	1125	L<EV::ADNS> (asynchronous DNS), L<Glib::EV> (makes Glib/Gtk2 use EV as
		1126	event loop), L<EV::Glib> (embed Glib into EV), L<Coro::EV> (efficient
		1127	coroutines with EV), L<Net::SNMP::EV> (asynchronous SNMP), L<AnyEvent> for
		1128	event-loop agnostic and portable event driven programming.
553		1129
554	=head1 AUTHOR	1130	=head1 AUTHOR
555		1131
556	Marc Lehmann <schmorp@schmorp.de>	1132	Marc Lehmann <schmorp@schmorp.de>
557	http://home.schmorp.de/	1133	http://home.schmorp.de/
558		1134
559	=cut	1135	=cut
560		1136

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing EV/EV.pm (file contents): Revision 1.33 by root, Fri Nov 9 19:33:51 2007 UTC vs. Revision 1.115 by root, Tue Apr 28 00:50:56 2009 UTC

Diff Legend

Comparing EV/EV.pm (file contents):
Revision 1.33 by root, Fri Nov 9 19:33:51 2007 UTC vs.
Revision 1.115 by root, Tue Apr 28 00:50:56 2009 UTC