[ViewVC] Diff of: cvs/EV/EV.pm

Comparing EV/EV.pm (file contents):
Revision 1.21 by root, Thu Nov 1 17:20:25 2007 UTC vs.
Revision 1.74 by root, Fri Dec 21 05:30:25 2007 UTC

…		…
10		10
11	my $w = EV::timer 2, 0, sub {	11	my $w = EV::timer 2, 0, sub {
12	warn "is called after 2s";	12	warn "is called after 2s";
13	};	13	};
14		14
15	my $w = EV::timer 2, 1, sub {	15	my $w = EV::timer 2, 2, sub {
16	warn "is called roughly every 2s (repeat = 1)";	16	warn "is called roughly every 2s (repeat = 2)";
17	};	17	};
18		18
19	undef $w; # destroy event watcher again	19	undef $w; # destroy event watcher again
20		20
21	my $w = EV::periodic 0, 60, sub {	21	my $w = EV::periodic 0, 60, 0, sub {
22	warn "is called every minute, on the minute, exactly";	22	warn "is called every minute, on the minute, exactly";
23	};	23	};
24		24
25	# IO	25	# IO
26		26
27	my $w = EV::io *STDIN, EV::READ, sub {	27	my $w = EV::io *STDIN, EV::READ, sub {
28	my ($w, $revents) = @_; # all callbacks get the watcher object and event mask	28	my ($w, $revents) = @_; # all callbacks receive the watcher and event mask
29	warn "stdin is readable, you entered: ", <STDIN>;	29	warn "stdin is readable, you entered: ", <STDIN>;
30	};	30	};
31		31
32	# SIGNALS	32	# SIGNALS
33		33
34	my $w = EV::signal 'QUIT', sub {	34	my $w = EV::signal 'QUIT', sub {
35	warn "sigquit received\n";	35	warn "sigquit received\n";
36	};	36	};
37		37
		38	# CHILD/PID STATUS CHANGES
		39
38	my $w = EV::signal 3, sub {	40	my $w = EV::child 666, sub {
39	warn "sigquit received (this is GNU/Linux, right?)\n";	41	my ($w, $revents) = @_;
		42	my $status = $w->rstatus;
40	};	43	};
41		44
42	# CHILD/PID STATUS CHANGES	45	# STAT CHANGES
43		46	my $w = EV::stat "/etc/passwd", 10, sub {
44	my $w = EV::child 666, sub {
45	my ($w, $revents, $status) = @_;	47	my ($w, $revents) = @_;
		48	warn $w->path, " has changed somehow.\n";
46	};	49	};
47		50
48	# MAINLOOP	51	# MAINLOOP
49	EV::loop; # loop until EV::loop_done is called	52	EV::loop; # loop until EV::unloop is called or all watchers stop
50	EV::loop EV::LOOP_ONESHOT; # block until at least one event could be handled	53	EV::loop EV::LOOP_ONESHOT; # block until at least one event could be handled
51	EV::loop EV::LOOP_NONBLOCK; # try to handle same events, but do not block	54	EV::loop EV::LOOP_NONBLOCK; # try to handle same events, but do not block
52		55
53	=head1 DESCRIPTION	56	=head1 DESCRIPTION
54		57
55	This module provides an interface to libev	58	This module provides an interface to libev
56	(L<http://software.schmorp.de/pkg/libev.html>).	59	(L<http://software.schmorp.de/pkg/libev.html>). While the documentation
		60	below is comprehensive, one might also consult the documentation of libev
		61	itself (L<http://cvs.schmorp.de/libev/ev.html>) for more subtle details on
		62	watcher semantics or some discussion on the available backends, or how to
		63	force a specific backend with C<LIBEV_FLAGS>, or just about in any case
		64	because it has much more detailed information.
57		65
58	=cut	66	=cut
59		67
60	package EV;	68	package EV;
61		69
62	use strict;	70	use strict;
63		71
64	BEGIN {	72	BEGIN {
65	our $VERSION = '0.1';	73	our $VERSION = '2.0';
66	use XSLoader;	74	use XSLoader;
67	XSLoader::load "EV", $VERSION;	75	XSLoader::load "EV", $VERSION;
68	}	76	}
69		77
70	@EV::Io::ISA =	78	@EV::IO::ISA =
71	@EV::Timer::ISA =	79	@EV::Timer::ISA =
72	@EV::Periodic::ISA =	80	@EV::Periodic::ISA =
73	@EV::Signal::ISA =	81	@EV::Signal::ISA =
		82	@EV::Child::ISA =
		83	@EV::Stat::ISA =
74	@EV::Idle::ISA =	84	@EV::Idle::ISA =
75	@EV::Prepare::ISA =	85	@EV::Prepare::ISA =
76	@EV::Check::ISA =	86	@EV::Check::ISA =
77	@EV::Child::ISA = "EV::Watcher";	87	@EV::Embed::ISA =
		88	@EV::Fork::ISA =
		89	"EV::Watcher";
		90
		91	@EV::Loop::Default::ISA = "EV::Loop";
		92
		93	=head1 EVENT LOOPS
		94
		95	EV supports multiple event loops: There is a single "default event loop"
		96	that can handle everything including signals and child watchers, and any
		97	number of "dynamic event loops" that can use different backends (with
		98	various limitations), but no child and signal watchers.
		99
		100	You do not have to do anything to create the default event loop: When
		101	the module is loaded a suitable backend is selected on the premise of
		102	selecting a working backend (which for example rules out kqueue on most
		103	BSDs). Modules should, unless they have "special needs" always use the
		104	default loop as this is fastest (perl-wise), best supported by other
		105	modules (e.g. AnyEvent or Coro) and most portable event loop.
		106
		107	For specific programs you cna create additional event loops dynamically.
		108
		109	=over 4
		110
		111	=item $loop = new EV::loop [$flags]
		112
		113	Create a new event loop as per the specified flags. Please refer to the
		114	C<ev_loop_new ()> function description in the libev documentation
		115	(L<http://pod.tst.eu/http://cvs.schmorp.de/libev/ev.pod#GLOBAL_FUNCTIONS>)
		116	for more info.
		117
		118	The loop will automatically be destroyed when it is no longer referenced
		119	by any watcher and the loop object goes out of scope.
		120
		121	Using C<EV::FLAG_FORKCHECK> is recommended, as only the default event loop
		122	is protected by this module.
		123
		124	=item $loop->loop_fork
		125
		126	Must be called after a fork in the child, before entering or continuing
		127	the event loop. An alternative is to use C<EV::FLAG_FORKCHECK> which calls
		128	this fucntion automatically, at some performance loss (refer to the libev
		129	documentation).
		130
		131	=back
		132
78		133
79	=head1 BASIC INTERFACE	134	=head1 BASIC INTERFACE
80		135
81	=over 4	136	=over 4
82		137
83	=item $EV::DIED	138	=item $EV::DIED
84		139
85	Must contain a reference to a function that is called when a callback	140	Must contain a reference to a function that is called when a callback
86	throws an exception (with $@ containing thr error). The default prints an	141	throws an exception (with $@ containing the error). The default prints an
87	informative message and continues.	142	informative message and continues.
88		143
89	If this callback throws an exception it will be silently ignored.	144	If this callback throws an exception it will be silently ignored.
90		145
91	=item $time = EV::time	146	=item $time = EV::time
92		147
93	Returns the current time in (fractional) seconds since the epoch.	148	Returns the current time in (fractional) seconds since the epoch.
94		149
95	=item $time = EV::now	150	=item $time = EV::now
		151
		152	=item $time = $loop->now
96		153
97	Returns the time the last event loop iteration has been started. This	154	Returns the time the last event loop iteration has been started. This
98	is the time that (relative) timers are based on, and refering to it is	155	is the time that (relative) timers are based on, and refering to it is
99	usually faster then calling EV::time.	156	usually faster then calling EV::time.
100		157
101	=item $method = EV::ev_method	158	=item $backend = EV::backend
		159
		160	=item $backend = $loop->backend
102		161
103	Returns an integer describing the backend used by libev (EV::METHOD_SELECT	162	Returns an integer describing the backend used by libev (EV::METHOD_SELECT
104	or EV::METHOD_EPOLL).	163	or EV::METHOD_EPOLL).
105		164
106	=item EV::loop [$flags]	165	=item EV::loop [$flags]
107		166
		167	=item $loop->loop ([$flags])
		168
108	Begin checking for events and calling callbacks. It returns when a	169	Begin checking for events and calling callbacks. It returns when a
109	callback calls EV::loop_done.	170	callback calls EV::unloop.
110		171
111	The $flags argument can be one of the following:	172	The $flags argument can be one of the following:
112		173
113	0 as above	174	0 as above
114	EV::LOOP_ONESHOT block at most once (wait, but do not loop)	175	EV::LOOP_ONESHOT block at most once (wait, but do not loop)
115	EV::LOOP_NONBLOCK do not block at all (fetch/handle events but do not wait)	176	EV::LOOP_NONBLOCK do not block at all (fetch/handle events but do not wait)
116		177
117	=item EV::loop_done [$how]	178	=item EV::unloop [$how]
118		179
		180	=item $loop->unloop ([$how])
		181
119	When called with no arguments or an argument of 1, makes the innermost	182	When called with no arguments or an argument of EV::UNLOOP_ONE, makes the
120	call to EV::loop return.	183	innermost call to EV::loop return.
121		184
122	When called with an agrument of 2, all calls to EV::loop will return as	185	When called with an argument of EV::UNLOOP_ALL, all calls to EV::loop will return as
123	fast as possible.	186	fast as possible.
124		187
125	=back	188	=item $count = EV::loop_count
126		189
127	=head2 WATCHER	190	=item $count = $loop->loop_count
		191
		192	Return the number of times the event loop has polled for new
		193	events. Sometiems useful as a generation counter.
		194
		195	=item EV::once $fh_or_undef, $events, $timeout, $cb->($revents)
		196
		197	=item $loop->once ($fh_or_undef, $events, $timeout, $cb->($revents))
		198
		199	This function rolls together an I/O and a timer watcher for a single
		200	one-shot event without the need for managing a watcher object.
		201
		202	If C<$fh_or_undef> is a filehandle or file descriptor, then C<$events>
		203	must be a bitset containing either C<EV::READ>, C<EV::WRITE> or C<EV::READ
		204	\| EV::WRITE>, indicating the type of I/O event you want to wait for. If
		205	you do not want to wait for some I/O event, specify C<undef> for
		206	C<$fh_or_undef> and C<0> for C<$events>).
		207
		208	If timeout is C<undef> or negative, then there will be no
		209	timeout. Otherwise a EV::timer with this value will be started.
		210
		211	When an error occurs or either the timeout or I/O watcher triggers, then
		212	the callback will be called with the received event set (in general
		213	you can expect it to be a combination of C<EV:ERROR>, C<EV::READ>,
		214	C<EV::WRITE> and C<EV::TIMEOUT>).
		215
		216	EV::once doesn't return anything: the watchers stay active till either
		217	of them triggers, then they will be stopped and freed, and the callback
		218	invoked.
		219
		220	=item EV::feed_fd_event ($fd, $revents)
		221
		222	=item $loop->feed_fd_event ($fd, $revents)
		223
		224	Feed an event on a file descriptor into EV. EV will react to this call as
		225	if the readyness notifications specified by C<$revents> (a combination of
		226	C<EV::READ> and C<EV::WRITE>) happened on the file descriptor C<$fd>.
		227
		228	=item EV::feed_signal_event ($signal)
		229
		230	Feed a signal event into EV. EV will react to this call as if the signal
		231	specified by C<$signal> had occured.
		232
		233	=back
		234
		235
		236	=head1 WATCHER OBJECTS
128		237
129	A watcher is an object that gets created to record your interest in some	238	A watcher is an object that gets created to record your interest in some
130	event. For instance, if you want to wait for STDIN to become readable, you	239	event. For instance, if you want to wait for STDIN to become readable, you
131	would create an EV::io watcher for that:	240	would create an EV::io watcher for that:
132		241
…		…
141	events.	250	events.
142		251
143	Each watcher type has its associated bit in revents, so you can use the	252	Each watcher type has its associated bit in revents, so you can use the
144	same callback for multiple watchers. The event mask is named after the	253	same callback for multiple watchers. The event mask is named after the
145	type, i..e. EV::child sets EV::CHILD, EV::prepare sets EV::PREPARE,	254	type, i..e. EV::child sets EV::CHILD, EV::prepare sets EV::PREPARE,
146	EV::periodic sets EV::PERIODIC and so on, with the exception of IO events	255	EV::periodic sets EV::PERIODIC and so on, with the exception of I/O events
147	(which can set both EV::READ and EV::WRITE bits), and EV::timer (which	256	(which can set both EV::READ and EV::WRITE bits), and EV::timer (which
148	uses EV::TIMEOUT).	257	uses EV::TIMEOUT).
149		258
150	In the rare case where one wants to create a watcher but not start it at	259	In the rare case where one wants to create a watcher but not start it at
151	the same time, each constructor has a variant with a trailing C<_ns> in	260	the same time, each constructor has a variant with a trailing C<_ns> in
152	its name, e.g. EV::io has a non-starting variant EV::io_ns and so on.	261	its name, e.g. EV::io has a non-starting variant EV::io_ns and so on.
153		262
154	Please note that a watcher will automatically be stopped when the watcher	263	Please note that a watcher will automatically be stopped when the watcher
155	object is returned, so you I<need> to keep the watcher objects returned by	264	object is destroyed, so you I<need> to keep the watcher objects returned by
156	the constructors.	265	the constructors.
157		266
158	=head2 WATCHER TYPES	267	Also, all methods changing some aspect of a watcher (->set, ->priority,
		268	->fh and so on) automatically stop and start it again if it is active,
		269	which means pending events get lost.
159		270
160	Now lets move to the existing watcher types and asociated methods.	271	=head2 COMMON WATCHER METHODS
161		272
162	The following methods are available for all watchers. Then followes a	273	This section lists methods common to all watchers.
163	description of each watcher constructor (EV::io, EV::timer, EV::periodic,
164	EV::signal, EV::child, EV::idle, EV::prepare and EV::check), followed by
165	any type-specific methods (if any).
166		274
167	=over 4	275	=over 4
168		276
169	=item $w->start	277	=item $w->start
170		278
…		…
174		282
175	=item $w->stop	283	=item $w->stop
176		284
177	Stop a watcher if it is active. Also clear any pending events (events that	285	Stop a watcher if it is active. Also clear any pending events (events that
178	have been received but that didn't yet result in a callback invocation),	286	have been received but that didn't yet result in a callback invocation),
179	regardless of wether the watcher was active or not.	287	regardless of whether the watcher was active or not.
180		288
181	=item $bool = $w->is_active	289	=item $bool = $w->is_active
182		290
183	Returns true if the watcher is active, false otherwise.	291	Returns true if the watcher is active, false otherwise.
184		292
		293	=item $current_data = $w->data
		294
		295	=item $old_data = $w->data ($new_data)
		296
		297	Queries a freely usable data scalar on the watcher and optionally changes
		298	it. This is a way to associate custom data with a watcher:
		299
		300	my $w = EV::timer 60, 0, sub {
		301	warn $_[0]->data;
		302	};
		303	$w->data ("print me!");
		304
185	=item $current_cb = $w->cb	305	=item $current_cb = $w->cb
186		306
187	=item $old_cb = $w->cb ($new_cb)	307	=item $old_cb = $w->cb ($new_cb)
188		308
189	Queries the callback on the watcher and optionally changes it. You cna do	309	Queries the callback on the watcher and optionally changes it. You can do
190	this at any time.	310	this at any time without the watcher restarting.
191		311
		312	=item $current_priority = $w->priority
		313
		314	=item $old_priority = $w->priority ($new_priority)
		315
		316	Queries the priority on the watcher and optionally changes it. Pending
		317	watchers with higher priority will be invoked first. The valid range of
		318	priorities lies between EV::MAXPRI (default 2) and EV::MINPRI (default
		319	-2). If the priority is outside this range it will automatically be
		320	normalised to the nearest valid priority.
		321
		322	The default priority of any newly-created watcher is 0.
		323
		324	Note that the priority semantics have not yet been fleshed out and are
		325	subject to almost certain change.
		326
192	=item $w->trigger ($revents)	327	=item $w->invoke ($revents)
193		328
194	Call the callback now with the given event mask.	329	Call the callback now with the given event mask.
195		330
		331	=item $w->feed_event ($revents)
		332
		333	Feed some events on this watcher into EV. EV will react to this call as if
		334	the watcher had received the given C<$revents> mask.
		335
		336	=item $revents = $w->clear_pending
		337
		338	If the watcher is pending, this function returns clears its pending status
		339	and returns its C<$revents> bitset (as if its callback was invoked). If the
		340	watcher isn't pending it does nothing and returns C<0>.
		341
		342	=item $previous_state = $w->keepalive ($bool)
		343
		344	Normally, C<EV::loop> will return when there are no active watchers
		345	(which is a "deadlock" because no progress can be made anymore). This is
		346	convinient because it allows you to start your watchers (and your jobs),
		347	call C<EV::loop> once and when it returns you know that all your jobs are
		348	finished (or they forgot to register some watchers for their task :).
		349
		350	Sometimes, however, this gets in your way, for example when you the module
		351	that calls C<EV::loop> (usually the main program) is not the same module
		352	as a long-living watcher (for example a DNS client module written by
		353	somebody else even). Then you might want any outstanding requests to be
		354	handled, but you would not want to keep C<EV::loop> from returning just
		355	because you happen to have this long-running UDP port watcher.
		356
		357	In this case you can clear the keepalive status, which means that even
		358	though your watcher is active, it won't keep C<EV::loop> from returning.
		359
		360	The initial value for keepalive is true (enabled), and you cna change it
		361	any time.
		362
		363	Example: Register an I/O watcher for some UDP socket but do not keep the
		364	event loop from running just because of that watcher.
		365
		366	my $udp_socket = ...
		367	my $udp_watcher = EV::io $udp_socket, EV::READ, sub { ... };
		368	$1000udp_watcher->keepalive (0);
		369
		370	=item $loop = $w->loop
		371
		372	Return the loop that this watcher is attached to.
		373
		374	=back
		375
		376
		377	=head1 WATCHER TYPES
		378
		379	Each of the following subsections describes a single watcher type.
		380
		381	=head3 I/O WATCHERS - is this file descriptor readable or writable?
		382
		383	=over 4
196		384
197	=item $w = EV::io $fileno_or_fh, $eventmask, $callback	385	=item $w = EV::io $fileno_or_fh, $eventmask, $callback
198		386
199	=item $w = EV::io_ns $fileno_or_fh, $eventmask, $callback	387	=item $w = EV::io_ns $fileno_or_fh, $eventmask, $callback
200		388
		389	=item $w = $loop->io 8$fileno_or_fh, $eventmask, $callback)
		390
		391	=item $w = $loop->io_ns ($fileno_or_fh, $eventmask, $callback)
		392
201	As long as the returned watcher object is alive, call the C<$callback>	393	As long as the returned watcher object is alive, call the C<$callback>
202	when the events specified in C<$eventmask>.	394	when at least one of events specified in C<$eventmask> occurs.
203		395
204	The $eventmask can be one or more of these constants ORed together:	396	The $eventmask can be one or more of these constants ORed together:
205		397
206	EV::READ wait until read() wouldn't block anymore	398	EV::READ wait until read() wouldn't block anymore
207	EV::WRITE wait until write() wouldn't block anymore	399	EV::WRITE wait until write() wouldn't block anymore
…		…
223		415
224	=item $old_eventmask = $w->events ($new_eventmask)	416	=item $old_eventmask = $w->events ($new_eventmask)
225		417
226	Returns the previously set event mask and optionally set a new one.	418	Returns the previously set event mask and optionally set a new one.
227		419
		420	=back
		421
		422
		423	=head3 TIMER WATCHERS - relative and optionally repeating timeouts
		424
		425	=over 4
228		426
229	=item $w = EV::timer $after, $repeat, $callback	427	=item $w = EV::timer $after, $repeat, $callback
230		428
231	=item $w = EV::timer_ns $after, $repeat, $callback	429	=item $w = EV::timer_ns $after, $repeat, $callback
232		430
233	Calls the callback after C<$after> seconds. If C<$repeat> is non-zero,	431	=item $w = $loop->timer ($after, $repeat, $callback)
234	the timer will be restarted (with the $repeat value as $after) after the	432
235	callback returns.	433	=item $w = $loop->timer_ns ($after, $repeat, $callback)
		434
		435	Calls the callback after C<$after> seconds (which may be fractional). If
		436	C<$repeat> is non-zero, the timer will be restarted (with the $repeat
		437	value as $after) after the callback returns.
236		438
237	This means that the callback would be called roughly after C<$after>	439	This means that the callback would be called roughly after C<$after>
238	seconds, and then every C<$repeat> seconds. "Roughly" because the time of	440	seconds, and then every C<$repeat> seconds. The timer does his best not
239	callback processing is not taken into account, so the timer will slowly	441	to drift, but it will not invoke the timer more often then once per event
240	drift. If that isn't acceptable, look at EV::periodic.	442	loop iteration, and might drift in other cases. If that isn't acceptable,
		443	look at EV::periodic, which can provide long-term stable timers.
241		444
242	The timer is based on a monotonic clock, that is if somebody is sitting	445	The timer is based on a monotonic clock, that is, if somebody is sitting
243	in front of the machine while the timer is running and changes the system	446	in front of the machine while the timer is running and changes the system
244	clock, the timer will nevertheless run (roughly) the same time.	447	clock, the timer will nevertheless run (roughly) the same time.
245		448
246	The C<timer_ns> variant doesn't start (activate) the newly created watcher.	449	The C<timer_ns> variant doesn't start (activate) the newly created watcher.
247		450
248	=item $w->set ($after, $repeat)	451	=item $w->set ($after, $repeat)
249		452
250	Reconfigures the watcher, see the constructor above for details. Can be at	453	Reconfigures the watcher, see the constructor above for details. Can be called at
251	any time.	454	any time.
252		455
253	=item $w->again	456	=item $w->again
254		457
255	Similar to the C<start> method, but has special semantics for repeating timers:	458	Similar to the C<start> method, but has special semantics for repeating timers:
		459
		460	If the timer is active and non-repeating, it will be stopped.
256		461
257	If the timer is active and repeating, reset the timeout to occur	462	If the timer is active and repeating, reset the timeout to occur
258	C<$repeat> seconds after now.	463	C<$repeat> seconds after now.
259		464
260	If the timer is active and non-repeating, it will be stopped.
261
262	If the timer is in active and repeating, start it.	465	If the timer is inactive and repeating, start it using the repeat value.
263		466
264	Otherwise do nothing.	467	Otherwise do nothing.
265		468
266	This behaviour is useful when you have a timeout for some IO	469	This behaviour is useful when you have a timeout for some IO
267	operation. You create a timer object with the same value for C<$after> and	470	operation. You create a timer object with the same value for C<$after> and
268	C<$repeat>, and then, in the read/write watcher, run the C<again> method	471	C<$repeat>, and then, in the read/write watcher, run the C<again> method
269	on the timeout.	472	on the timeout.
270		473
		474	=back
271		475
		476
		477	=head3 PERIODIC WATCHERS - to cron or not to cron?
		478
		479	=over 4
		480
272	=item $w = EV::periodic $at, $interval, $callback	481	=item $w = EV::periodic $at, $interval, $reschedule_cb, $callback
273		482
274	=item $w = EV::periodic_ns $at, $interval, $callback	483	=item $w = EV::periodic_ns $at, $interval, $reschedule_cb, $callback
275		484
276	Similar to EV::timer, but the time is given as an absolute point in time	485	=item $w = $loop->periodic ($at, $interval, $reschedule_cb, $callback)
277	(C<$at>), plus an optional C<$interval>.
278		486
279	If the C<$interval> is zero, then the callback will be called at the time	487	=item $w = $loop->periodic_ns ($at, $interval, $reschedule_cb, $callback)
280	C<$at> if that is in the future, or as soon as possible if it is in the
281	past. It will not automatically repeat.
282		488
283	If the C<$interval> is nonzero, then the watcher will always be scheduled	489	Similar to EV::timer, but is not based on relative timeouts but on
284	to time out at the next C<$at + N * $interval> time.	490	absolute times. Apart from creating "simple" timers that trigger "at" the
		491	specified time, it can also be used for non-drifting absolute timers and
		492	more complex, cron-like, setups that are not adversely affected by time
		493	jumps (i.e. when the system clock is changed by explicit date -s or other
		494	means such as ntpd). It is also the most complex watcher type in EV.
285		495
286	This can be used to schedule a callback to run at very regular intervals,	496	It has three distinct "modes":
287	as long as the processing time is less then the interval (otherwise	497
288	obviously events will be skipped).	498	=over 4
		499
		500	=item * absolute timer ($interval = $reschedule_cb = 0)
		501
		502	This time simply fires at the wallclock time C<$at> and doesn't repeat. It
		503	will not adjust when a time jump occurs, that is, if it is to be run
		504	at January 1st 2011 then it will run when the system time reaches or
		505	surpasses this time.
		506
		507	=item * non-repeating interval timer ($interval > 0, $reschedule_cb = 0)
		508
		509	In this mode the watcher will always be scheduled to time out at the
		510	next C<$at + N * $interval> time (for some integer N) and then repeat,
		511	regardless of any time jumps.
		512
		513	This can be used to create timers that do not drift with respect to system
		514	time:
		515
		516	my $hourly = EV::periodic 0, 3600, 0, sub { print "once/hour\n" };
		517
		518	That doesn't mean there will always be 3600 seconds in between triggers,
		519	but only that the the clalback will be called when the system time shows a
		520	full hour (UTC).
289		521
290	Another way to think about it (for the mathematically inclined) is that	522	Another way to think about it (for the mathematically inclined) is that
291	EV::periodic will try to run the callback at the next possible time where	523	EV::periodic will try to run the callback in this mode at the next
292	C<$time = $at (mod $interval)>, regardless of any time jumps.	524	possible time where C<$time = $at (mod $interval)>, regardless of any time
		525	jumps.
293		526
294	This periodic timer is based on "wallclock time", that is, if the clock	527	=item * manual reschedule mode ($reschedule_cb = coderef)
295	changes (C<ntp>, C<date -s> etc.), then the timer will nevertheless run at	528
296	the specified time. This means it will never drift (it might jitter, but	529	In this mode $interval and $at are both being ignored. Instead, each
297	it will not drift).	530	time the periodic watcher gets scheduled, the reschedule callback
		531	($reschedule_cb) will be called with the watcher as first, and the current
		532	time as second argument.
		533
		534	I<This callback MUST NOT stop or destroy this or any other periodic
		535	watcher, ever>. If you need to stop it, return 1e30 and stop it
		536	afterwards.
		537
		538	It must return the next time to trigger, based on the passed time value
		539	(that is, the lowest time value larger than to the second argument). It
		540	will usually be called just before the callback will be triggered, but
		541	might be called at other times, too.
		542
		543	This can be used to create very complex timers, such as a timer that
		544	triggers on each midnight, local time (actually 24 hours after the last
		545	midnight, to keep the example simple. If you know a way to do it correctly
		546	in about the same space (without requiring elaborate modules), drop me a
		547	note :):
		548
		549	my $daily = EV::periodic 0, 0, sub {
		550	my ($w, $now) = @_;
		551
		552	use Time::Local ();
		553	my (undef, undef, undef, $d, $m, $y) = localtime $now;
		554	86400 + Time::Local::timelocal 0, 0, 0, $d, $m, $y
		555	}, sub {
		556	print "it's midnight or likely shortly after, now\n";
		557	};
		558
		559	=back
298		560
299	The C<periodic_ns> variant doesn't start (activate) the newly created watcher.	561	The C<periodic_ns> variant doesn't start (activate) the newly created watcher.
300		562
301	=item $w->set ($at, $interval)	563	=item $w->set ($at, $interval, $reschedule_cb)
302		564
303	Reconfigures the watcher, see the constructor above for details. Can be at	565	Reconfigures the watcher, see the constructor above for details. Can be called at
304	any time.	566	any time.
305		567
		568	=item $w->again
		569
		570	Simply stops and starts the watcher again.
		571
		572	=item $time = $w->at
		573
		574	Return the time that the watcher is expected to trigger next.
		575
		576	=back
		577
		578
		579	=head3 SIGNAL WATCHERS - signal me when a signal gets signalled!
		580
		581	=over 4
306		582
307	=item $w = EV::signal $signal, $callback	583	=item $w = EV::signal $signal, $callback
308		584
309	=item $w = EV::signal_ns $signal, $callback	585	=item $w = EV::signal_ns $signal, $callback
310		586
311	Call the callback when $signal is received (the signal can be specified	587	Call the callback when $signal is received (the signal can be specified by
312	by number or by name, just as with kill or %SIG).	588	number or by name, just as with C<kill> or C<%SIG>).
313		589
314	EV will grab the signal for the process (the kernel only allows one	590	EV will grab the signal for the process (the kernel only allows one
315	component to receive a signal at a time) when you start a signal watcher,	591	component to receive a signal at a time) when you start a signal watcher,
316	and removes it again when you stop it. Perl does the same when you	592	and removes it again when you stop it. Perl does the same when you
317	add/remove callbacks to %SIG, so watch out.	593	add/remove callbacks to C<%SIG>, so watch out.
318		594
319	You can have as many signal watchers per signal as you want.	595	You can have as many signal watchers per signal as you want.
320		596
321	The C<signal_ns> variant doesn't start (activate) the newly created watcher.	597	The C<signal_ns> variant doesn't start (activate) the newly created watcher.
322		598
323	=item $w->set ($signal)	599	=item $w->set ($signal)
324		600
325	Reconfigures the watcher, see the constructor above for details. Can be at	601	Reconfigures the watcher, see the constructor above for details. Can be
		602	called at any time.
		603
		604	=item $current_signum = $w->signal
		605
		606	=item $old_signum = $w->signal ($new_signal)
		607
		608	Returns the previously set signal (always as a number not name) and
		609	optionally set a new one.
		610
		611	=back
		612
		613
		614	=head3 CHILD WATCHERS - watch out for process status changes
		615
		616	=over 4
		617
		618	=item $w = EV::child $pid, $callback
		619
		620	=item $w = EV::child_ns $pid, $callback
		621
		622	=item $w = $loop->child ($pid, $callback)
		623
		624	=item $w = $loop->child_ns ($pid, $callback)
		625
		626	Call the callback when a status change for pid C<$pid> (or any pid if
		627	C<$pid> is 0) has been received. More precisely: when the process receives
		628	a C<SIGCHLD>, EV will fetch the outstanding exit/wait status for all
		629	changed/zombie children and call the callback.
		630
		631	It is valid (and fully supported) to install a child watcher after a child
		632	has exited but before the event loop has started its next iteration (for
		633	example, first you C<fork>, then the new child process might exit, and
		634	only then do you install a child watcher in the parent for the new pid).
		635
		636	You can access both exit (or tracing) status and pid by using the
		637	C<rstatus> and C<rpid> methods on the watcher object.
		638
		639	You can have as many pid watchers per pid as you want, they will all be
		640	called.
		641
		642	The C<child_ns> variant doesn't start (activate) the newly created watcher.
		643
		644	=item $w->set ($pid)
		645
		646	Reconfigures the watcher, see the constructor above for details. Can be called at
326	any time.	647	any time.
327		648
		649	=item $current_pid = $w->pid
328		650
329	=item $w = EV::child $pid, $callback	651	=item $old_pid = $w->pid ($new_pid)
330		652
331	=item $w = EV::child_ns $pid, $callback	653	Returns the previously set process id and optionally set a new one.
332		654
333	Call the callback when a status change for pid C<$pid> (or any pid	655	=item $exit_status = $w->rstatus
334	if C<$pid> is 0) has been received. More precisely: when the process
335	receives a SIGCHLD, EV will fetch the outstanding exit/wait status for all
336	changed/zombie children and call the callback.
337		656
338	Unlike all other callbacks, this callback will be called with an	657	Return the exit/wait status (as returned by waitpid, see the waitpid entry
339	additional third argument which is the exit status. See the C<waitpid>	658	in perlfunc).
340	function for details.
341		659
342	You can have as many pid watchers per pid as you want.	660	=item $pid = $w->rpid
343		661
		662	Return the pid of the awaited child (useful when you have installed a
		663	watcher for all pids).
		664
		665	=back
		666
		667
		668	=head3 STAT WATCHERS - did the file attributes just change?
		669
		670	=over 4
		671
		672	=item $w = EV::stat $path, $interval, $callback
		673
		674	=item $w = EV::stat_ns $path, $interval, $callback
		675
		676	=item $w = $loop->stat ($path, $interval, $callback)
		677
		678	=item $w = $loop->stat_ns ($path, $interval, $callback)
		679
		680	Call the callback when a file status change has been detected on
		681	C<$path>. The C<$path> does not need to exist, changing from "path exists"
		682	to "path does not exist" is a status change like any other.
		683
		684	The C<$interval> is a recommended polling interval for systems where
		685	OS-supported change notifications don't exist or are not supported. If
		686	you use C<0> then an unspecified default is used (which is highly
		687	recommended!), which is to be expected to be around five seconds usually.
		688
		689	This watcher type is not meant for massive numbers of stat watchers,
		690	as even with OS-supported change notifications, this can be
		691	resource-intensive.
		692
344	The C<child_ns> variant doesn't start (activate) the newly created watcher.	693	The C<stat_ns> variant doesn't start (activate) the newly created watcher.
345		694
346	=item $w->set ($pid)	695	=item ... = $w->stat
347		696
		697	This call is very similar to the perl C<stat> built-in: It stats (using
		698	C<lstat>) the path specified in the watcher and sets perls stat cache (as
		699	well as EV's idea of the current stat values) to the values found.
		700
		701	In scalar context, a boolean is return indicating success or failure of
		702	the stat. In list context, the same 13-value list as with stat is returned
		703	(except that the blksize and blocks fields are not reliable).
		704
		705	In the case of an error, errno is set to C<ENOENT> (regardless of the
		706	actual error value) and the C<nlink> value is forced to zero (if the stat
		707	was successful then nlink is guaranteed to be non-zero).
		708
		709	See also the next two entries for more info.
		710
		711	=item ... = $w->attr
		712
		713	Just like C<< $w->stat >>, but without the initial stat'ing: this returns
		714	the values most recently detected by EV. See the next entry for more info.
		715
		716	=item ... = $w->prev
		717
		718	Just like C<< $w->stat >>, but without the initial stat'ing: this returns
		719	the previous set of values, before the change.
		720
		721	That is, when the watcher callback is invoked, C<< $w->prev >> will be set
		722	to the values found I<before> a change was detected, while C<< $w->attr >>
		723	returns the values found leading to the change detection. The difference (if any)
		724	between C<prev> and C<attr> is what triggered the callback.
		725
		726	If you did something to the filesystem object and do not want to trigger
		727	yet another change, you can call C<stat> to update EV's idea of what the
		728	current attributes are.
		729
		730	=item $w->set ($path, $interval)
		731
348	Reconfigures the watcher, see the constructor above for details. Can be at	732	Reconfigures the watcher, see the constructor above for details. Can be
349	any time.	733	called at any time.
350		734
		735	=item $current_path = $w->path
		736
		737	=item $old_path = $w->path ($new_path)
		738
		739	Returns the previously set path and optionally set a new one.
		740
		741	=item $current_interval = $w->interval
		742
		743	=item $old_interval = $w->interval ($new_interval)
		744
		745	Returns the previously set interval and optionally set a new one. Can be
		746	used to query the actual interval used.
		747
		748	=back
		749
		750
		751	=head3 IDLE WATCHERS - when you've got nothing better to do...
		752
		753	=over 4
351		754
352	=item $w = EV::idle $callback	755	=item $w = EV::idle $callback
353		756
354	=item $w = EV::idle_ns $callback	757	=item $w = EV::idle_ns $callback
355		758
356	Call the callback when there are no pending io, timer/periodic, signal or	759	=item $w = $loop->idle ($callback)
357	child events, i.e. when the process is idle.	760
		761	=item $w = $loop->idle_ns ($callback)
		762
		763	Call the callback when there are no other pending watchers of the same or
		764	higher priority (excluding check, prepare and other idle watchers of the
		765	same or lower priority, of course). They are called idle watchers because
		766	when the watcher is the highest priority pending event in the process, the
		767	process is considered to be idle at that priority.
		768
		769	If you want a watcher that is only ever called when I<no> other events are
		770	outstanding you have to set the priority to C<EV::MINPRI>.
358		771
359	The process will not block as long as any idle watchers are active, and	772	The process will not block as long as any idle watchers are active, and
360	they will be called repeatedly until stopped.	773	they will be called repeatedly until stopped.
361		774
		775	For example, if you have idle watchers at priority C<0> and C<1>, and
		776	an I/O watcher at priority C<0>, then the idle watcher at priority C<1>
		777	and the I/O watcher will always run when ready. Only when the idle watcher
		778	at priority C<1> is stopped and the I/O watcher at priority C<0> is not
		779	pending with the C<0>-priority idle watcher be invoked.
		780
362	The C<idle_ns> variant doesn't start (activate) the newly created watcher.	781	The C<idle_ns> variant doesn't start (activate) the newly created watcher.
363		782
		783	=back
		784
		785
		786	=head3 PREPARE WATCHERS - customise your event loop!
		787
		788	=over 4
364		789
365	=item $w = EV::prepare $callback	790	=item $w = EV::prepare $callback
366		791
367	=item $w = EV::prepare_ns $callback	792	=item $w = EV::prepare_ns $callback
		793
		794	=item $w = $loop->prepare ($callback)
		795
		796	=item $w = $loop->prepare_ns 8$callback)
368		797
369	Call the callback just before the process would block. You can still	798	Call the callback just before the process would block. You can still
370	create/modify any watchers at this point.	799	create/modify any watchers at this point.
371		800
372	See the EV::check watcher, below, for explanations and an example.	801	See the EV::check watcher, below, for explanations and an example.
373		802
374	The C<prepare_ns> variant doesn't start (activate) the newly created watcher.	803	The C<prepare_ns> variant doesn't start (activate) the newly created watcher.
375		804
		805	=back
		806
		807
		808	=head3 CHECK WATCHERS - customise your event loop even more!
		809
		810	=over 4
376		811
377	=item $w = EV::check $callback	812	=item $w = EV::check $callback
378		813
379	=item $w = EV::check_ns $callback	814	=item $w = EV::check_ns $callback
		815
		816	=item $w = $loop->check ($callback)
		817
		818	=item $w = $loop->check_ns ($callback)
380		819
381	Call the callback just after the process wakes up again (after it has	820	Call the callback just after the process wakes up again (after it has
382	gathered events), but before any other callbacks have been invoked.	821	gathered events), but before any other callbacks have been invoked.
383		822
384	This is used to integrate other event-based software into the EV	823	This is used to integrate other event-based software into the EV
…		…
392	# do nothing unless active	831	# do nothing unless active
393	$dispatcher->{_event_queue_h}	832	$dispatcher->{_event_queue_h}
394	or return;	833	or return;
395		834
396	# make the dispatcher handle any outstanding stuff	835	# make the dispatcher handle any outstanding stuff
		836	... not shown
397		837
398	# create an IO watcher for each and every socket	838	# create an I/O watcher for each and every socket
399	@snmp_watcher = (	839	@snmp_watcher = (
400	(map { EV::io $_, EV::READ, sub { } }	840	(map { EV::io $_, EV::READ, sub { } }
401	keys %{ $dispatcher->{_descriptors} }),	841	keys %{ $dispatcher->{_descriptors} }),
		842
		843	EV::timer +($event->[Net::SNMP::Dispatcher::_ACTIVE]
		844	? $event->[Net::SNMP::Dispatcher::_TIME] - EV::now : 0),
		845	0, sub { },
402	);	846	);
403
404	# if there are any timeouts, also create a timer
405	push @snmp_watcher, EV::timer $event->[Net::SNMP::Dispatcher::_TIME] - EV::now, 0, sub { }
406	if $event->[Net::SNMP::Dispatcher::_ACTIVE];
407	};	847	};
408		848
409	The callbacks are irrelevant, the only purpose of those watchers is	849	The callbacks are irrelevant (and are not even being called), the
410	to wake up the process as soon as one of those events occurs (socket	850	only purpose of those watchers is to wake up the process as soon as
411	readable, or timer timed out). The corresponding EV::check watcher will then	851	one of those events occurs (socket readable, or timer timed out). The
412	clean up:	852	corresponding EV::check watcher will then clean up:
413		853
414	our $snmp_check = EV::check sub {	854	our $snmp_check = EV::check sub {
415	# destroy all watchers	855	# destroy all watchers
416	@snmp_watcher = ();	856	@snmp_watcher = ();
417		857
418	# make the dispatcher handle any new stuff	858	# make the dispatcher handle any new stuff
		859	... not shown
419	};	860	};
420		861
421	The callbacks of the created watchers will not be called as the watchers	862	The callbacks of the created watchers will not be called as the watchers
422	are destroyed before this cna happen (remember EV::check gets called	863	are destroyed before this cna happen (remember EV::check gets called
423	first).	864	first).
424		865
425	The C<check_ns> variant doesn't start (activate) the newly created watcher.	866	The C<check_ns> variant doesn't start (activate) the newly created watcher.
426		867
427	=back	868	=back
428		869
		870
		871	=head3 FORK WATCHERS - the audacity to resume the event loop after a fork
		872
		873	Fork watchers are called when a C<fork ()> was detected. The invocation
		874	is done before the event loop blocks next and before C<check> watchers
		875	are being called, and only in the child after the fork.
		876
		877	=over 4
		878
		879	=item $w = EV::fork $callback
		880
		881	=item $w = EV::fork_ns $callback
		882
		883	=item $w = $loop->fork ($callback)
		884
		885	=item $w = $loop->fork_ns ($callback)
		886
		887	Call the callback before the event loop is resumed in the child process
		888	after a fork.
		889
		890	The C<fork_ns> variant doesn't start (activate) the newly created watcher.
		891
		892	=back
		893
		894
		895	=head1 PERL SIGNALS
		896
		897	While Perl signal handling (C<%SIG>) is not affected by EV, the behaviour
		898	with EV is as the same as any other C library: Perl-signals will only be
		899	handled when Perl runs, which means your signal handler might be invoked
		900	only the next time an event callback is invoked.
		901
		902	The solution is to use EV signal watchers (see C<EV::signal>), which will
		903	ensure proper operations with regards to other event watchers.
		904
		905	If you cannot do this for whatever reason, you can also force a watcher
		906	to be called on every event loop iteration by installing a C<EV::check>
		907	watcher:
		908
		909	my $async_check = EV::check sub { };
		910
		911	This ensures that perl shortly gets into control for a short time, and
		912	also ensures slower overall operation.
		913
429	=head1 THREADS	914	=head1 THREADS
430		915
431	Threads are not supported by this in any way. Perl pseudo-threads is evil	916	Threads are not supported by this module in any way. Perl pseudo-threads
432	stuff and must die.	917	is evil stuff and must die. As soon as Perl gains real threads I will work
		918	on thread support for it.
		919
		920	=head1 FORK
		921
		922	Most of the "improved" event delivering mechanisms of modern operating
		923	systems have quite a few problems with fork(2) (to put it bluntly: it is
		924	not supported and usually destructive). Libev makes it possible to work
		925	around this by having a function that recreates the kernel state after
		926	fork in the child.
		927
		928	On non-win32 platforms, this module requires the pthread_atfork
		929	functionality to do this automatically for you. This function is quite
		930	buggy on most BSDs, though, so YMMV. The overhead for this is quite
		931	negligible, because everything the function currently does is set a flag
		932	that is checked only when the event loop gets used the next time, so when
		933	you do fork but not use EV, the overhead is minimal.
		934
		935	On win32, there is no notion of fork so all this doesn't apply, of course.
433		936
434	=cut	937	=cut
435		938
436	our $DIED = sub {	939	our $DIED = sub {
437	warn "EV: error in callback (ignoring): $@";	940	warn "EV: error in callback (ignoring): $@";
438	};	941	};
439		942
440	init;	943	default_loop
441		944	or die 'EV: cannot initialise libev backend. bad $ENV{LIBEV_FLAGS}?';
442	push @AnyEvent::REGISTRY, [EV => "EV::AnyEvent"];
443		945
444	1;	946	1;
445		947
446	=head1 SEE ALSO	948	=head1 SEE ALSO
447		949
448	L<EV::DNS>, L<EV::AnyEvent>.	950	L<EV::ADNS> (asynchronous DNS), L<Glib::EV> (makes Glib/Gtk2 use EV as
		951	event loop), L<EV::Glib> (embed Glib into EV), L<Coro::EV> (efficient
		952	coroutines with EV), L<Net::SNMP::EV> (asynchronous SNMP).
449		953
450	=head1 AUTHOR	954	=head1 AUTHOR
451		955
452	Marc Lehmann <schmorp@schmorp.de>	956	Marc Lehmann <schmorp@schmorp.de>
453	http://home.schmorp.de/	957	http://home.schmorp.de/

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing EV/EV.pm (file contents): Revision 1.21 by root, Thu Nov 1 17:20:25 2007 UTC vs. Revision 1.74 by root, Fri Dec 21 05:30:25 2007 UTC

Diff Legend

Comparing EV/EV.pm (file contents):
Revision 1.21 by root, Thu Nov 1 17:20:25 2007 UTC vs.
Revision 1.74 by root, Fri Dec 21 05:30:25 2007 UTC