[ViewVC] Diff of: cvs/EV/EV.pm

Comparing EV/EV.pm (file contents):
Revision 1.6 by root, Sat Oct 27 07:30:10 2007 UTC vs.
Revision 1.43 by root, Wed Nov 21 05:09:38 2007 UTC

1	=head1 NAME	1	=head1 NAME
2		2
3	EV - perl interface to libevent, monkey.org/~provos/libevent/	3	EV - perl interface to libev, a high performance full-featured event loop
4		4
5	=head1 SYNOPSIS	5	=head1 SYNOPSIS
6		6
7	use EV;	7	use EV;
8		8
9	# TIMER	9	# TIMERS
10		10
11	my $w = EV::timer 2, 0, sub {	11	my $w = EV::timer 2, 0, sub {
12	warn "is called after 2s";	12	warn "is called after 2s";
13	};	13	};
14		14
15	my $w = EV::timer 2, 1, sub {	15	my $w = EV::timer 2, 2, sub {
16	warn "is called roughly every 2s (repeat = 1)";	16	warn "is called roughly every 2s (repeat = 2)";
17	};	17	};
18		18
19	undef $w; # destroy event watcher again	19	undef $w; # destroy event watcher again
20		20
21	# IO
22
23	my $w = EV::timer_abs 0, 60, sub {	21	my $w = EV::periodic 0, 60, 0, sub {
24	warn "is called every minute, on the minute, exactly";	22	warn "is called every minute, on the minute, exactly";
25	};	23	};
26		24
		25	# IO
		26
27	my $w = EV::io \*STDIN, EV::READ \| EV::PERSIST, sub {	27	my $w = EV::io *STDIN, EV::READ, sub {
28	my ($w, $events) = @_; # all callbacks get the watcher object and event mask	28	my ($w, $revents) = @_; # all callbacks receive the watcher and event mask
29	if ($events & EV::TIMEOUT) {
30	warn "nothign received on stdin for 10 seconds, retrying";
31	} else {
32	warn "stdin is readable, you entered: ", <STDIN>;	29	warn "stdin is readable, you entered: ", <STDIN>;
33	}
34	};	30	};
35	$w->timeout (10);	31
		32	# SIGNALS
		33
		34	my $w = EV::signal 'QUIT', sub {
		35	warn "sigquit received\n";
		36	};
		37
		38	# CHILD/PID STATUS CHANGES
36		39
		40	my $w = EV::child 666, sub {
		41	my ($w, $revents) = @_;
		42	my $status = $w->rstatus;
		43	};
		44
37	# MAINLOOP	45	# MAINLOOP
38	EV::dispatch; # loop as long as watchers are active	46	EV::loop; # loop until EV::unloop is called or all watchers stop
39	EV::loop; # the same thing	47	EV::loop EV::LOOP_ONESHOT; # block until at least one event could be handled
40	EV::loop EV::LOOP_ONCE;	48	EV::loop EV::LOOP_NONBLOCK; # try to handle same events, but do not block
41	EV::loop EV::LOOP_ONSHOT;
42		49
43	=head1 DESCRIPTION	50	=head1 DESCRIPTION
44		51
45	This module provides an interface to libevent	52	This module provides an interface to libev
46	(L<http://monkey.org/~provos/libevent/>). You probably should acquaint	53	(L<http://software.schmorp.de/pkg/libev.html>).
47	yourself with its documentation and source code to be able to use this
48	module fully.
49
50	Please note thta this module disables the libevent EPOLL method by
51	default, see BUGS, below, if you need to enable it.
52		54
53	=cut	55	=cut
54		56
55	package EV;	57	package EV;
56		58
57	use strict;	59	use strict;
58		60
59	BEGIN {	61	BEGIN {
60	our $VERSION = '0.01';	62	our $VERSION = '1.1';
61	use XSLoader;	63	use XSLoader;
62	XSLoader::load "EV", $VERSION;	64	XSLoader::load "EV", $VERSION;
63	}	65	}
64		66
65	=head1 FUNCTIONAL INTERFACE	67	@EV::Io::ISA =
		68	@EV::Timer::ISA =
		69	@EV::Periodic::ISA =
		70	@EV::Signal::ISA =
		71	@EV::Idle::ISA =
		72	@EV::Prepare::ISA =
		73	@EV::Check::ISA =
		74	@EV::Child::ISA = "EV::Watcher";
		75
		76	=head1 BASIC INTERFACE
66		77
67	=over 4	78	=over 4
68		79
69	=item $EV::NPRI	80	=item $EV::DIED
70		81
71	How many priority levels are available.	82	Must contain a reference to a function that is called when a callback
		83	throws an exception (with $@ containing thr error). The default prints an
		84	informative message and continues.
		85
		86	If this callback throws an exception it will be silently ignored.
		87
		88	=item $time = EV::time
		89
		90	Returns the current time in (fractional) seconds since the epoch.
72		91
73	=item $time = EV::now	92	=item $time = EV::now
74		93
75	Returns the time in (fractional) seconds since the epoch.	94	Returns the time the last event loop iteration has been started. This
76		95	is the time that (relative) timers are based on, and refering to it is
77	=item $version = EV::version	96	usually faster then calling EV::time.
78		97
79	=item $method = EV::method	98	=item $method = EV::method
80		99
81	Return version string and event polling method used.	100	Returns an integer describing the backend used by libev (EV::METHOD_SELECT
		101	or EV::METHOD_EPOLL).
82		102
83	=item EV::loop $flags # EV::LOOP_ONCE, EV::LOOP_ONESHOT	103	=item EV::loop [$flags]
84		104
85	=item EV::loopexit $after	105	Begin checking for events and calling callbacks. It returns when a
		106	callback calls EV::unloop.
86		107
87	Exit any active loop or dispatch after C<$after> seconds or immediately if	108	The $flags argument can be one of the following:
88	C<$after> is missing or zero.
89		109
90	=item EV::dispatch	110	0 as above
		111	EV::LOOP_ONESHOT block at most once (wait, but do not loop)
		112	EV::LOOP_NONBLOCK do not block at all (fetch/handle events but do not wait)
91		113
92	Same as C<EV::loop 0>.	114	=item EV::unloop [$how]
93		115
94	=item EV::event $callback	116	When called with no arguments or an argument of EV::UNLOOP_ONE, makes the
		117	innermost call to EV::loop return.
95		118
96	Creates a new event watcher waiting for nothing, calling the given callback.	119	When called with an argument of EV::UNLOOP_ALL, all calls to EV::loop will return as
		120	fast as possible.
97		121
		122	=back
		123
		124	=head2 WATCHER
		125
		126	A watcher is an object that gets created to record your interest in some
		127	event. For instance, if you want to wait for STDIN to become readable, you
		128	would create an EV::io watcher for that:
		129
		130	my $watcher = EV::io *STDIN, EV::READ, sub {
		131	my ($watcher, $revents) = @_;
		132	warn "yeah, STDIN should not be readable without blocking!\n"
		133	};
		134
		135	All watchers can be active (waiting for events) or inactive (paused). Only
		136	active watchers will have their callbacks invoked. All callbacks will be
		137	called with at least two arguments: the watcher and a bitmask of received
		138	events.
		139
		140	Each watcher type has its associated bit in revents, so you can use the
		141	same callback for multiple watchers. The event mask is named after the
		142	type, i..e. EV::child sets EV::CHILD, EV::prepare sets EV::PREPARE,
		143	EV::periodic sets EV::PERIODIC and so on, with the exception of IO events
		144	(which can set both EV::READ and EV::WRITE bits), and EV::timer (which
		145	uses EV::TIMEOUT).
		146
		147	In the rare case where one wants to create a watcher but not start it at
		148	the same time, each constructor has a variant with a trailing C<_ns> in
		149	its name, e.g. EV::io has a non-starting variant EV::io_ns and so on.
		150
		151	Please note that a watcher will automatically be stopped when the watcher
		152	object is destroyed, so you I<need> to keep the watcher objects returned by
		153	the constructors.
		154
		155	Also, all methods changing some aspect of a watcher (->set, ->priority,
		156	->fh and so on) automatically stop and start it again if it is active,
		157	which means pending events get lost.
		158
		159	=head2 WATCHER TYPES
		160
		161	Now lets move to the existing watcher types and asociated methods.
		162
		163	The following methods are available for all watchers. Then followes a
		164	description of each watcher constructor (EV::io, EV::timer, EV::periodic,
		165	EV::signal, EV::child, EV::idle, EV::prepare and EV::check), followed by
		166	any type-specific methods (if any).
		167
		168	=over 4
		169
		170	=item $w->start
		171
		172	Starts a watcher if it isn't active already. Does nothing to an already
		173	active watcher. By default, all watchers start out in the active state
		174	(see the description of the C<_ns> variants if you need stopped watchers).
		175
		176	=item $w->stop
		177
		178	Stop a watcher if it is active. Also clear any pending events (events that
		179	have been received but that didn't yet result in a callback invocation),
		180	regardless of wether the watcher was active or not.
		181
		182	=item $bool = $w->is_active
		183
		184	Returns true if the watcher is active, false otherwise.
		185
		186	=item $current_data = $w->data
		187
		188	=item $old_data = $w->data ($new_data)
		189
		190	Queries a freely usable data scalar on the watcher and optionally changes
		191	it. This is a way to associate custom data with a watcher:
		192
		193	my $w = EV::timer 60, 0, sub {
		194	warn $_[0]->data;
		195	};
		196	$w->data ("print me!");
		197
		198	=item $current_cb = $w->cb
		199
		200	=item $old_cb = $w->cb ($new_cb)
		201
		202	Queries the callback on the watcher and optionally changes it. You can do
		203	this at any time without the watcher restarting.
		204
		205	=item $current_priority = $w->priority
		206
		207	=item $old_priority = $w->priority ($new_priority)
		208
		209	Queries the priority on the watcher and optionally changes it. Pending
		210	watchers with higher priority will be invoked first. The valid range of
		211	priorities lies between EV::MAXPRI (default 2) and EV::MINPRI (default
		212	-2). If the priority is outside this range it will automatically be
		213	normalised to the nearest valid priority.
		214
		215	The default priority of any newly-created weatcher is 0.
		216
		217	=item $w->trigger ($revents)
		218
		219	Call the callback now with the given event mask.
		220
		221
98	=item my $w = EV::io $fileno_or_fh, $eventmask, $callback	222	=item $w = EV::io $fileno_or_fh, $eventmask, $callback
99		223
100	=item my $w = EV::io_ns $fileno_or_fh, $eventmask, $callback	224	=item $w = EV::io_ns $fileno_or_fh, $eventmask, $callback
101		225
102	As long as the returned watcher object is alive, call the C<$callback>	226	As long as the returned watcher object is alive, call the C<$callback>
103	when the events specified in C<$eventmask> happen. Initially, the timeout	227	when the events specified in C<$eventmask>.
104	is disabled.
105		228
106	The C<io_ns> variant doesn't add/start the newly created watcher.
107
108	Eventmask can be one or more of these constants ORed together:	229	The $eventmask can be one or more of these constants ORed together:
109		230
110	EV::READ wait until read() wouldn't block anymore	231	EV::READ wait until read() wouldn't block anymore
111	EV::WRITE wait until write() wouldn't block anymore	232	EV::WRITE wait until write() wouldn't block anymore
112	EV::PERSIST stay active after an event occured
113		233
		234	The C<io_ns> variant doesn't start (activate) the newly created watcher.
		235
		236	=item $w->set ($fileno_or_fh, $eventmask)
		237
		238	Reconfigures the watcher, see the constructor above for details. Can be
		239	called at any time.
		240
		241	=item $current_fh = $w->fh
		242
		243	=item $old_fh = $w->fh ($new_fh)
		244
		245	Returns the previously set filehandle and optionally set a new one.
		246
		247	=item $current_eventmask = $w->events
		248
		249	=item $old_eventmask = $w->events ($new_eventmask)
		250
		251	Returns the previously set event mask and optionally set a new one.
		252
		253
114	=item my $w = EV::timer $after, $repeat, $callback	254	=item $w = EV::timer $after, $repeat, $callback
115		255
116	=item my $w = EV::timer_ns $after, $repeat, $callback	256	=item $w = EV::timer_ns $after, $repeat, $callback
117		257
118	Calls the callback after C<$after> seconds. If C<$repeat> is true, the	258	Calls the callback after C<$after> seconds. If C<$repeat> is non-zero,
119	timer will be restarted after the callback returns. This means that the	259	the timer will be restarted (with the $repeat value as $after) after the
120	callback would be called roughly every C<$after> seconds, prolonged by the	260	callback returns.
121	time the callback takes.
122		261
		262	This means that the callback would be called roughly after C<$after>
		263	seconds, and then every C<$repeat> seconds. The timer does his best not
		264	to drift, but it will not invoke the timer more often then once per event
		265	loop iteration, and might drift in other cases. If that isn't acceptable,
		266	look at EV::periodic, which can provide long-term stable timers.
		267
		268	The timer is based on a monotonic clock, that is, if somebody is sitting
		269	in front of the machine while the timer is running and changes the system
		270	clock, the timer will nevertheless run (roughly) the same time.
		271
123	The C<timer_ns> variant doesn't add/start the newly created watcher.	272	The C<timer_ns> variant doesn't start (activate) the newly created watcher.
124		273
125	=item my $w = EV::timer_abs $at, $interval, $callback	274	=item $w->set ($after, $repeat)
126		275
127	=item my $w = EV::timer_abs_ns $at, $interval, $callback	276	Reconfigures the watcher, see the constructor above for details. Can be at
		277	any time.
128		278
129	Similar to EV::timer, but the time is given as an absolute point in time	279	=item $w->again
130	(C<$at>), plus an optional C<$interval>.
131		280
132	If the C<$interval> is zero, then the callback will be called at the time	281	Similar to the C<start> method, but has special semantics for repeating timers:
133	C<$at> if that is in the future, or as soon as possible if its in the
134	past. It will not automatically repeat.
135		282
136	If the C<$interval> is nonzero, then the watcher will always be scheduled	283	If the timer is active and non-repeating, it will be stopped.
137	to time out at the next C<$at + integer * $interval> time.
138		284
139	This can be used to schedule a callback to run at very regular intervals,	285	If the timer is active and repeating, reset the timeout to occur
140	as long as the processing time is less then the interval (otherwise	286	C<$repeat> seconds after now.
141	obviously events will be skipped).
142		287
143	The C<timer_abs_ns> variant doesn't add/start the newly created watcher.	288	If the timer is inactive and repeating, start it using the repeat value.
144		289
145	=item my $w = EV::signal $signum, $callback	290	Otherwise do nothing.
146		291
147	=item my $w = EV::signal_ns $signum, $callback	292	This behaviour is useful when you have a timeout for some IO
		293	operation. You create a timer object with the same value for C<$after> and
		294	C<$repeat>, and then, in the read/write watcher, run the C<again> method
		295	on the timeout.
148		296
149	Call the callback when signal $signum is received.
150		297
151	The C<signal_ns> variant doesn't add/start the newly created watcher.	298	=item $w = EV::periodic $at, $interval, $reschedule_cb, $callback
		299
		300	=item $w = EV::periodic_ns $at, $interval, $reschedule_cb, $callback
		301
		302	Similar to EV::timer, but is not based on relative timeouts but on
		303	absolute times. Apart from creating "simple" timers that trigger "at" the
		304	specified time, it can also be used for non-drifting absolute timers and
		305	more complex, cron-like, setups that are not adversely affected by time
		306	jumps (i.e. when the system clock is changed by explicit date -s or other
		307	means such as ntpd). It is also the most complex watcher type in EV.
		308
		309	It has three distinct "modes":
		310
		311	=over 4
		312
		313	=item * absolute timer ($interval = $reschedule_cb = 0)
		314
		315	This time simply fires at the wallclock time C<$at> and doesn't repeat. It
		316	will not adjust when a time jump occurs, that is, if it is to be run
		317	at January 1st 2011 then it will run when the system time reaches or
		318	surpasses this time.
		319
		320	=item * non-repeating interval timer ($interval > 0, $reschedule_cb = 0)
		321
		322	In this mode the watcher will always be scheduled to time out at the
		323	next C<$at + N * $interval> time (for some integer N) and then repeat,
		324	regardless of any time jumps.
		325
		326	This can be used to create timers that do not drift with respect to system
		327	time:
		328
		329	my $hourly = EV::periodic 0, 3600, 0, sub { print "once/hour\n" };
		330
		331	That doesn't mean there will always be 3600 seconds in between triggers,
		332	but only that the the clalback will be called when the system time shows a
		333	full hour (UTC).
		334
		335	Another way to think about it (for the mathematically inclined) is that
		336	EV::periodic will try to run the callback in this mode at the next
		337	possible time where C<$time = $at (mod $interval)>, regardless of any time
		338	jumps.
		339
		340	=item * manual reschedule mode ($reschedule_cb = coderef)
		341
		342	In this mode $interval and $at are both being ignored. Instead, each
		343	time the periodic watcher gets scheduled, the reschedule callback
		344	($reschedule_cb) will be called with the watcher as first, and the current
		345	time as second argument.
		346
		347	I<This callback MUST NOT stop or destroy this or any other periodic
		348	watcher, ever>. If you need to stop it, return 1e30 and stop it
		349	afterwards.
		350
		351	It must return the next time to trigger, based on the passed time value
		352	(that is, the lowest time value larger than to the second argument). It
		353	will usually be called just before the callback will be triggered, but
		354	might be called at other times, too.
		355
		356	This can be used to create very complex timers, such as a timer that
		357	triggers on each midnight, local time (actually 24 hours after the last
		358	midnight, to keep the example simple. If you know a way to do it correctly
		359	in about the same space (without requiring elaborate modules), drop me a
		360	note :):
		361
		362	my $daily = EV::periodic 0, 0, sub {
		363	my ($w, $now) = @_;
		364
		365	use Time::Local ();
		366	my (undef, undef, undef, $d, $m, $y) = localtime $now;
		367	86400 + Time::Local::timelocal 0, 0, 0, $d, $m, $y
		368	}, sub {
		369	print "it's midnight or likely shortly after, now\n";
		370	};
152		371
153	=back	372	=back
154		373
155	=head1 THE EV::Event CLASS	374	The C<periodic_ns> variant doesn't start (activate) the newly created watcher.
156		375
157	All EV functions creating an event watcher (designated by C<my $w =>	376	=item $w->set ($at, $interval, $reschedule_cb)
158	above) support the following methods on the returned watcher object:
159		377
160	=over 4	378	Reconfigures the watcher, see the constructor above for details. Can be at
		379	any time.
161		380
162	=item $w->add ($timeout)	381	=item $w->again
163		382
164	Stops and (re-)starts the event watcher, setting the optional timeout to	383	Simply stops and starts the watcher again.
165	the given value, or clearing the timeout if none is given.
166		384
167	=item $w->start
168		385
169	Stops and (re-)starts the event watcher without touching the timeout.	386	=item $w = EV::signal $signal, $callback
170		387
171	=item $w->del	388	=item $w = EV::signal_ns $signal, $callback
172		389
		390	Call the callback when $signal is received (the signal can be specified
		391	by number or by name, just as with kill or %SIG).
		392
		393	EV will grab the signal for the process (the kernel only allows one
		394	component to receive a signal at a time) when you start a signal watcher,
		395	and removes it again when you stop it. Perl does the same when you
		396	add/remove callbacks to %SIG, so watch out.
		397
		398	You can have as many signal watchers per signal as you want.
		399
		400	The C<signal_ns> variant doesn't start (activate) the newly created watcher.
		401
		402	=item $w->set ($signal)
		403
		404	Reconfigures the watcher, see the constructor above for details. Can be at
		405	any time.
		406
		407	=item $current_signum = $w->signal
		408
		409	=item $old_signum = $w->signal ($new_signal)
		410
		411	Returns the previously set signal (always as a number not name) and
		412	optionally set a new one.
		413
		414
		415	=item $w = EV::child $pid, $callback
		416
		417	=item $w = EV::child_ns $pid, $callback
		418
		419	Call the callback when a status change for pid C<$pid> (or any pid
		420	if C<$pid> is 0) has been received. More precisely: when the process
		421	receives a SIGCHLD, EV will fetch the outstanding exit/wait status for all
		422	changed/zombie children and call the callback.
		423
		424	You can access both status and pid by using the C<rstatus> and C<rpid>
		425	methods on the watcher object.
		426
		427	You can have as many pid watchers per pid as you want.
		428
		429	The C<child_ns> variant doesn't start (activate) the newly created watcher.
		430
173	=item $w->stop	431	=item $w->set ($pid)
174		432
175	Stop the event watcher if it was started.	433	Reconfigures the watcher, see the constructor above for details. Can be at
		434	any time.
176		435
177	=item $current_callback = $w->cb
178
179	=item $old_callback = $w->cb ($new_callback)
180
181	Return the previously set callback and optionally set a new one.
182
183	=item $current_fh = $w->fh	436	=item $current_pid = $w->pid
184		437
185	=item $old_fh = $w->fh ($new_fh)	438	=item $old_pid = $w->pid ($new_pid)
186		439
187	Returns the previously set filehandle and optionally set a new one.
188
189	=item $current_eventmask = $w->events
190
191	=item $old_eventmask = $w->events ($new_eventmask)
192
193	Returns the previously set event mask and optionally set a new one.	440	Returns the previously set process id and optionally set a new one.
194		441
195	=item $w->timeout ($after, $repeat)	442	=item $exit_status = $w->rstatus
196		443
197	Resets the timeout (see C<EV::timer> for details).	444	Return the exit/wait status (as returned by waitpid, see the waitpid entry
		445	in perlfunc).
198		446
199	=item $w->timeout_abs ($at, $interval)	447	=item $pid = $w->rpid
200		448
201	Resets the timeout (see C<EV::timer_abs> for details).	449	Return the pid of the awaited child (useful when you have installed a
		450	watcher for all pids).
202		451
203	=item $w->priority_set ($priority)
204		452
205	Set the priority of the watcher to C<$priority> (0 <= $priority < $EV::NPRI).	453	=item $w = EV::idle $callback
		454
		455	=item $w = EV::idle_ns $callback
		456
		457	Call the callback when there are no pending io, timer/periodic, signal or
		458	child events, i.e. when the process is idle.
		459
		460	The process will not block as long as any idle watchers are active, and
		461	they will be called repeatedly until stopped.
		462
		463	The C<idle_ns> variant doesn't start (activate) the newly created watcher.
		464
		465
		466	=item $w = EV::prepare $callback
		467
		468	=item $w = EV::prepare_ns $callback
		469
		470	Call the callback just before the process would block. You can still
		471	create/modify any watchers at this point.
		472
		473	See the EV::check watcher, below, for explanations and an example.
		474
		475	The C<prepare_ns> variant doesn't start (activate) the newly created watcher.
		476
		477
		478	=item $w = EV::check $callback
		479
		480	=item $w = EV::check_ns $callback
		481
		482	Call the callback just after the process wakes up again (after it has
		483	gathered events), but before any other callbacks have been invoked.
		484
		485	This is used to integrate other event-based software into the EV
		486	mainloop: You register a prepare callback and in there, you create io and
		487	timer watchers as required by the other software. Here is a real-world
		488	example of integrating Net::SNMP (with some details left out):
		489
		490	our @snmp_watcher;
		491
		492	our $snmp_prepare = EV::prepare sub {
		493	# do nothing unless active
		494	$dispatcher->{_event_queue_h}
		495	or return;
		496
		497	# make the dispatcher handle any outstanding stuff
		498
		499	# create an IO watcher for each and every socket
		500	@snmp_watcher = (
		501	(map { EV::io $_, EV::READ, sub { } }
		502	keys %{ $dispatcher->{_descriptors} }),
		503	);
		504
		505	# if there are any timeouts, also create a timer
		506	push @snmp_watcher, EV::timer $event->[Net::SNMP::Dispatcher::_TIME] - EV::now, 0, sub { }
		507	if $event->[Net::SNMP::Dispatcher::_ACTIVE];
		508	};
		509
		510	The callbacks are irrelevant, the only purpose of those watchers is
		511	to wake up the process as soon as one of those events occurs (socket
		512	readable, or timer timed out). The corresponding EV::check watcher will then
		513	clean up:
		514
		515	our $snmp_check = EV::check sub {
		516	# destroy all watchers
		517	@snmp_watcher = ();
		518
		519	# make the dispatcher handle any new stuff
		520	};
		521
		522	The callbacks of the created watchers will not be called as the watchers
		523	are destroyed before this cna happen (remember EV::check gets called
		524	first).
		525
		526	The C<check_ns> variant doesn't start (activate) the newly created watcher.
206		527
207	=back	528	=back
208		529
209	=head1 BUGS	530	=head1 THREADS
210		531
211	Lots. Libevent itself isn't well tested and rather buggy, and this module	532	Threads are not supported by this in any way. Perl pseudo-threads is evil
212	is quite new at the moment.	533	stuff and must die.
213
214	Please note that the epoll method is not, in general, reliable in
215	programs that use fork (even if no libveent calls are being made in the
216	forked process). Since this is such a common issue, this module will
217	force the epoll method in EV to be off unless the global variable
218	$EV::ENABLE_EPOLL is set to 1 before loading this module for the first
219	time.
220		534
221	=cut	535	=cut
222		536
223	our $NPRI = 4;	537	our $DIED = sub {
224	our $BASE;	538	warn "EV: error in callback (ignoring): $@";
225	our $ENABLE_EPOLL;	539	};
226		540
227	{	541	default_loop
228	local $ENV{EVENT_NOEPOLL};	542	or die 'EV: cannot initialise libev backend. bad $ENV{LIBEV_METHODS}?';
229	$ENV{EVENT_NOEPOLL} = 1 unless $ENABLE_EPOLL;
230	$BASE = init;
231	}
232
233	priority_init $NPRI;
234
235	push @AnyEvent::REGISTRY, [EV => "EV::AnyEvent"];
236		543
237	1;	544	1;
238		545
239	=head1 SEE ALSO	546	=head1 SEE ALSO
240		547
241	L<EV::DNS>, L<event(3)>, L<event.h>, L<evdns.h>.	548	L<EV::DNS>.
242	L<EV::AnyEvent>.
243		549
244	=head1 AUTHOR	550	=head1 AUTHOR
245		551
246	Marc Lehmann <schmorp@schmorp.de>	552	Marc Lehmann <schmorp@schmorp.de>
247	http://home.schmorp.de/	553	http://home.schmorp.de/

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing EV/EV.pm (file contents): Revision 1.6 by root, Sat Oct 27 07:30:10 2007 UTC vs. Revision 1.43 by root, Wed Nov 21 05:09:38 2007 UTC

Diff Legend

Comparing EV/EV.pm (file contents):
Revision 1.6 by root, Sat Oct 27 07:30:10 2007 UTC vs.
Revision 1.43 by root, Wed Nov 21 05:09:38 2007 UTC