[ViewVC] Diff of: cvs/EV/Makefile.PL

Comparing EV/Makefile.PL (file contents):
Revision 1.16 by root, Tue Nov 6 17:20:42 2007 UTC vs.
Revision 1.58 by root, Sat Jun 22 15:50:36 2019 UTC

…		…
1	use 5.006;	1	use strict qw(vars subs);
2		2	use Canary::Stability EV => 1, 5.008002;
3	use Config;	3	use Config;
4	use ExtUtils::MakeMaker;	4	use ExtUtils::MakeMaker;
5		5
		6	sub have_inc($) {
		7	scalar grep -r "$_/$_[0]", $Config{usrinc}, split / /, $Config{incpth}
		8	}
		9
		10	my $DEFINE;
6		11
7	unless (-e "libev/ev_epoll.c") {	12	unless (-e "libev/ev_epoll.c") {
8	print <<EOF;	13	print <<EOF;
9		14
10	***	15	***
17	exit 1;	22	exit 1;
18	}	23	}
19		24
20	print <<EOF;	25	print <<EOF;
21		26
22
23	* * * * * * * * * * * * * * * * * *	27	* * * * * * * * * * * * * * * * * *
		28
24		29
25	Welcome to EV configuration. If you are in a hurry, just press return here	30	Welcome to EV configuration. If you are in a hurry, just press return here
26	and hope for the best. The defaults should usually do.	31	and hope for the best. The defaults should usually do.
27		32
28	EOF	33	EOF
…		…
31	$ENV{PERL_MM_USE_DEFAULT} = 1;	36	$ENV{PERL_MM_USE_DEFAULT} = 1;
32	}	37	}
33		38
34	print <<EOF;	39	print <<EOF;
35		40
36
37	* * * * * * * * * * * * * * * * * *	41	* * * * * * * * * * * * * * * * * *
		42
38		43
39	POSIX optionally offers support for a monotonic clock source. EV	44	POSIX optionally offers support for a monotonic clock source. EV
40	can take advantage of this clock source to detect time jumps	45	can take advantage of this clock source to detect time jumps more
41	reliably. Unfortunately, some systems are bound to be broken, so you can	46	reliably. Unfortunately, some systems are bound to be broken, so you can
42	disable this here: you can completely disable the detection and use of	47	disable this here: you can completely disable the detection and use of
43	the monotonic clock by answering 'n' here. Support for this clock type	48	the monotonic clock by answering 'n' here. Support for this clock type
44	will otherwise be autodetected at both compile- and runtime.	49	will otherwise be autodetected at both compile- and runtime. (this setting
		50	currently affects the use of nanosleep over select as well).
45		51
46	EOF	52	EOF
47		53
48	if (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/) {	54	unless (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/) {
49	$DEFINE .= " -DEV_USE_MONOTONIC";	55	$DEFINE .= " -DEV_USE_MONOTONIC=0";
50	}	56	}
51		57
52	print <<EOF;	58	print <<EOF;
53		59
54
55	* * * * * * * * * * * * * * * * * *	60	* * * * * * * * * * * * * * * * * *
		61
56		62
57	POSIX optionally offers support for a (potentially) high-resolution	63	POSIX optionally offers support for a (potentially) high-resolution
58	realtime clock interface. In a good implementation, using it is faster	64	realtime clock interface. In a good implementation, using it is faster
59	than the normal method of using gettimeofday. Unfortunately, this option	65	than the normal method of using gettimeofday. Unfortunately, this option
60	is also bound to be broken on some systems, so you can disable use and	66	is also bound to be broken on some systems, and current EV versions do not
61	probing of this feature altogether here. Otherwise support for this clock	67	actually call gettimeofday very often, so it defaults to no.
62	type will be autodetected at compiletime.
63		68
64	EOF	69	EOF
65		70
66	if (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "y") !~ /[yY]/) {	71	$DEFINE .= " -DEV_USE_REALTIME=" . (0 + (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "n") =~ /[yY]/));
		72
		73	print <<EOF;
		74
		75	* * * * * * * * * * * * * * * * * *
		76
		77
		78	EV can use various backends with various portability issues. The select
		79	backend is the most portable and makes for a good fallback, but it can be
		80	limited to a low number of file descriptors and/or might not compile. If
		81	you have problems with compiling ev_select.c, you might try to play around
		82	with disabling it here, or forcing it to use the fd_set provided by your
		83	OS, via the next question. I highly recommend keeping it in.
		84
		85	EOF
		86
		87	if (prompt ("Enable select backend (y/n)?", "y") =~ /[yY]/) {
67	$DEFINE .= " -DEV_USE_REALTIME=0";	88	$DEFINE .= " -DEV_USE_SELECT=1";
68	}
69		89
70	print <<EOF;	90	print <<EOF;
71		91
72
73	* * * * * * * * * * * * * * * * * *	92	* * * * * * * * * * * * * * * * * *
74		93
75	EV by default uses select, which makes it hard to write efficient servers,
76	especially if the number of active conencitons is much lower than the open
77	ones. GNU/Linux systems have a more scalable method called "epoll", which
78	EV can use. For this to work, both your kernel and glibc have to support
79	epoll, but if you can compile it, the detection will be done at runtime,
80	and EV will safely fall back to using select when epoll isn't available.
81	If unsure, accept the default.
82		94
83	EOF	95	The select backend can operate in two modes. One uses the system-provided
		96	fd_set and is usually limited to 1024 file descriptors (64 on windows),
		97	the other requires your header files to define NFDBITS and declare a
		98	suitable fd_mask type. If you run into problems compiling ev_select.c, you
		99	can try forcing the use of the system fd_set here.
84		100
85	if (prompt ("Enable epoll backend (y/n)?", (-e "/usr/include/sys/epoll.h") ? "y" : "n") =~ /[yY]/) {	101	EOF
		102
		103	if (prompt ("Force use of system fd_set for select backend (y/n)?", "n") =~ /[yY]/) {
		104	$DEFINE .= " -DEV_SELECT_USE_FD_SET";
		105	}
		106	} else {
86	$DEFINE .= " -DEV_USE_EPOLL";	107	$DEFINE .= " -DEV_USE_SELECT=0";
87	}	108	}
88		109
89	print <<EOF;	110	print <<EOF;
90		111
91
92	* * * * * * * * * * * * * * * * * *	112	* * * * * * * * * * * * * * * * * *
		113
		114
		115	The second very portable backend is poll(2). It does not exist on windows
		116	and various versions of Mac OS X (and on the other versions it simply
		117	doesn't work), but works basically everywhere else. It is recommended to use
		118	the default here unless you run into compile problems in ev_poll.c.
		119
		120	EOF
		121
		122	$DEFINE .= " -DEV_USE_POLL=" . (0 + (prompt ("Enable poll backend (y/n)?", (have_inc "poll.h") ? "y" : "n") =~ /[yY]/));
		123
		124	print <<EOF;
		125
		126	* * * * * * * * * * * * * * * * * *
		127
		128
		129	Select and poll make it hard to write efficient servers, especially if the
		130	number of active connections is much lower than the watched ones. GNU/Linux
		131	systems have a more scalable method called "epoll", which EV can use. For
		132	this to work, both your kernel and glibc have to support epoll, but if you
		133	can compile it, the detection will be done at runtime, and EV will safely
		134	fall back to using select when epoll isn't available. If unsure, accept
		135	the default.
		136
		137	EOF
		138
		139	my $can_epoll = have_inc "sys/epoll.h";
		140	$can_epoll = $ENV{EV_EPOLL} if exists $ENV{EV_EPOLL};
		141	$DEFINE .= " -DEV_USE_EPOLL=" . (0 + (prompt ("Enable epoll backend (y/n)?", $can_epoll ? "y" : "n") =~ /[yY]/));
		142
		143	print <<EOF;
		144
		145	* * * * * * * * * * * * * * * * * *
		146
		147
		148	Linux 4.18 introduced another event polling interface, this time using
		149	the Linux AIO API. While this API is far superior to epoll and almost
		150	rivals kqueue, it also suffers from the same issues as kqueue typically
		151	does: only a subset of file types are supported (as of 4.19, I have seen
		152	eventfd, pipes, sockets files and some devices, but no ttys). It also
		153	is subject arbitrary system-wide limits imposed on it. Therefore, this
		154	backend is not used by default, even when it is compiled in, and you have
		155	to request it explicitly, e.g. with LIBEV_FLAGS=64. If unsure, accept the
		156	default.
		157
		158	EOF
		159
		160	my $can_linuxaio = have_inc "linux/aio_abi.h";
		161	$can_linuxaio or die;
		162	$can_linuxaio = $ENV{EV_LINUXAIO} if exists $ENV{EV_LINUXAIO};
		163	$DEFINE .= " -DEV_USE_LINUXAIO=" . (0 + (prompt ("Enable linux aio backend (y/n)?", $can_linuxaio ? "y" : "n") =~ /[yY]/));
		164
		165	print <<EOF;
		166
		167	* * * * * * * * * * * * * * * * * *
		168
93		169
94	Similarly to the epoll backend above, EV can take advantage of kqueue on	170	Similarly to the epoll backend above, EV can take advantage of kqueue on
95	many BSD systems (it seems to be broken on Mac OS X though). The kqueue
96	backend has not been tested, however, so it is disabled by default. Please
97	test (and preferably fix) the kqueue backend when you have a machine
98	supporting it. Support for kqueue will be detected at runtime, with a	171	many BSD systems. Support for kqueue will be detected at runtime, with a
99	safe fallback to other methods when it cannot be used.	172	safe fallback to other methods when it cannot be used.
100		173
101	EOF	174	Note that kqueue is broken on most operating systems, so by default it
		175	won't be used on many platforms, but you can still create your own event
		176	loop with kqueue backend if you ask specifically for it.
102		177
103	if (prompt ("Enable kqueue backend (y/n)?", (-e "/usr/include/sys/event.h") ? "y" : "n") =~ /[yY]/) {	178	Here is what we know:
104	$DEFINE .= " -DEV_USE_KQUEUE";
105	}
106		179
107	print <<EOF;	180	NetBSD: partially working in at least 3.1 and later. Yeah! :)
		181	FreeBSD: broken on at least 6.2-STABLE, spotty in later versions,
		182	sockets likely work, ptys definitely don't.
		183	OpenBSD: reports indicate that it likely doesn't work
		184	(similar problems as on FreeBSD).
		185	OS X: completely, utterly broken on at least <= 10.6.
108		186
		187	EOF
109		188
		189	my $can_kqueue = have_inc "sys/event.h";
		190	$can_kqueue = $ENV{EV_KQUEUE} if exists $ENV{EV_KQUEUE};
		191	$DEFINE .= " -DEV_USE_KQUEUE=" . (0 + (prompt ("Enable kqueue backend (y/n)?", $can_kqueue ? "y" : "n") =~ /[yY]/));
		192
		193	print <<EOF;
		194
110	* * * * * * * * * * * * * * * * * *	195	* * * * * * * * * * * * * * * * * *
		196
		197
		198	Similarly to the kqueue backend above, EV can take advantage of the
		199	solaris 10 event port interface. Support for event ports will be detected
		200	at runtime, with a safe fallback to other methods when it cannot be used.
		201
		202	EOF
		203
		204	$DEFINE .= " -DEV_USE_PORT=" . (0 + (prompt ("Enable event port backend (y/n)?", (have_inc "sys/port.h") ? "y" : "n") =~ /[yY]/));
		205
		206	print <<EOF;
		207
		208	* * * * * * * * * * * * * * * * * *
		209
111		210
112	EV needs the functions pthread_atfork and clock_gettime. On most systems	211	EV needs the functions pthread_atfork and clock_gettime. On most systems
113	you need some special libraries for this (such as -lrt and -lpthread). You	212	you need some special libraries for this (such as -lrt and -lpthread). You
114	can specify additional libraries to provide these calls now, or accept the	213	can specify additional libraries to provide these calls (and any other
115	default.	214	required by EV) now, or accept the default.
116		215
117	EOF	216	On GNU/Linux systems, EV uses the LSB 3.1 __register_atfork function
		217	to avoid the dependency on libpthread, and directly uses the clock_gettime
		218	syscall to avoid a dependency on librt.
118		219
		220	EOF
		221
		222	my $solaris_libs = $^O =~ /solaris/i ? "-lsocket -lnsl" : "";
		223	my $librt = $^O =~ /linux/i ? "" : "-lpthread -lrt";
		224	my $LIBS = exists $ENV{EV_LIBS} ? $ENV{EV_LIBS} : "$librt $solaris_libs";
119	$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", "-lpthread -lrt";	225	$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", $LIBS;
120		226
121		227
122	print <<EOF;	228	print <<EOF;
123		229
124
125	* * * * * * * * * * * * * * * * * *	230	* * * * * * * * * * * * * * * * * *
126		231
		232
		233	A backend of a different kind is the Linux inotify(7) interface, which can
		234	be used to speed up (and reduce resource consumption) of stat watchers. If
		235	you have the include file and libc support for it, it is usually a good
		236	idea to enable it, as kernel availability is detected at runtime.
		237
127	EOF	238	EOF
		239
		240	my $can_inotify = have_inc "sys/inotify.h";
		241	$can_inotify = $ENV{EV_INOTIFY} if exists $ENV{EV_INOTIFY};
		242	$DEFINE .= " -DEV_USE_INOTIFY=" . (0 + (prompt ("Enable inotify support (y/n)?", $can_inotify ? "y" : "n") =~ /[yY]/));
		243
		244	print <<EOF;
		245
		246	* * * * * * * * * * * * * * * * * *
		247
		248
		249	Another useful bit of functionality is the Linux eventfd, which is useful
		250	for faster signal handling (don't care) and intra-thread communications
		251	(more relevant). Kernel support for this will be probed at runtime, but
		252	your libc must contain the necessary wrapper. Glibc 2.7 and later should
		253	have this wrapper.
		254
		255	EOF
		256
		257	my $can_eventfd = have_inc "sys/eventfd.h";
		258	$can_eventfd = $ENV{EV_EVENTFD} if exists $ENV{EV_EVENTFD};
		259	$DEFINE .= " -DEV_USE_EVENTFD=" . (0 + (prompt ("Enable linux eventfd support (y/n)?", $can_eventfd ? "y" : "n") =~ /[yY]/));
		260
		261	print <<EOF;
		262
		263	* * * * * * * * * * * * * * * * * *
		264
		265
		266	Another sometimes useful bit of functionality is the Linux signalfd, which
		267	is useful for faster signal handling (don't care). Kernel support for
		268	this will be probed at runtime, but your libc must contain the necessary
		269	wrapper. Glibc 2.7 and later should have this wrapper.
		270
		271	EOF
		272
		273	my $can_signalfd = have_inc "sys/signalfd.h";
		274	$can_signalfd = $ENV{EV_SIGNALFD} if exists $ENV{EV_SIGNALFD};
		275	$DEFINE .= " -DEV_USE_SIGNALFD=" . (0 + (prompt ("Enable linux signalfd support (y/n)?", $can_signalfd ? "y" : "n") =~ /[yY]/));
		276
		277	print <<EOF;
		278
		279	* * * * * * * * * * * * * * * * * *
		280
		281
		282	Very rarely, people want to tweak EV even more, e.g. to exclude
		283	or include certain watcher types or backends. This can be done by adding
		284	extra -D options here, or via the EV_EXTRA_DEFS environment variable.
		285
		286	For example, if you run into compile problems because of missing memory
		287	fences (or you just want extra performance), you can tell EV to not support
		288	smp and threads via -DEV_NO_THREADS.
		289
		290	Normal persons just press enter.
		291
		292	EOF
		293
		294	$DEFINE .= " " . prompt "Any extra -D options?", "$ENV{EV_EXTRA_DEFS}";
		295
		296	print <<EOF;
		297
		298	* * * * * * * * * * * * * * * * * *
		299
		300
		301	EOF
		302
		303	my @anyevent = eval { require AnyEvent; $AnyEvent::VERSION < 5.29 } ? (AnyEvent => 5.29) : ();
128		304
129	WriteMakefile(	305	WriteMakefile(
130	dist => {	306	dist => {
131	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',	307	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',
132	COMPRESS => 'gzip -9v',	308	COMPRESS => 'gzip -9v',
133	SUFFIX => '.gz',	309	SUFFIX => '.gz',
134	},	310	},
135	depend => {	311	depend => {
136	"EV.c" => "EV/EVAPI.h "	312	"EV.c" => "EV/EVAPI.h "
137	. "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c "	313	. "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c "
138	. "libev/event.h libev/event.c libev/evdns.h libev/evdns.c",	314	. "libev/ev_vars.h libev/ev_wrap.h",
139	},	315	},
140	INC => "-Ilibev",	316	INC => "-Ilibev",
141	DEFINE => "$DEFINE",	317	DEFINE => "$DEFINE",
142	NAME => "EV",	318	NAME => "EV",
143	LIBS => [$LIBS],	319	LIBS => [$LIBS],
		320	PREREQ_PM => {
		321	@anyevent,
		322	"common::sense" => 0,
		323	},
		324	CONFIGURE_REQUIRES => { "ExtUtils::MakeMaker" => 6.52, "Canary::Stability" => 0 },
144	VERSION_FROM => "EV.pm",	325	VERSION_FROM => "EV.pm",
145	PM => {	326	PM => {
146	'EV.pm' => '$(INST_LIBDIR)/EV.pm',	327	'EV.pm' => '$(INST_LIB)/EV.pm',
147	'EV/AnyEvent.pm' => '$(INST_LIBDIR)/EV/AnyEvent.pm',
148	'EV/DNS.pm' => '$(INST_LIBDIR)/EV/DNS.pm',
149	'EV/EVAPI.h' => '$(INST_LIBDIR)/EV/EVAPI.h',	328	'EV/EVAPI.h' => '$(INST_LIB)/EV/EVAPI.h',
150	'EV/MakeMaker.pm' => '$(INST_LIBDIR)/EV/MakeMaker.pm',	329	'EV/MakeMaker.pm' => '$(INST_LIB)/EV/MakeMaker.pm',
151	'libev/ev.h' => '$(INST_LIBDIR)/EV/ev.h',	330	'libev/ev.h' => '$(INST_LIB)/EV/ev.h',
		331	'libev/ev.pod' => '$(INST_LIB)/EV/libev.pod',
152	},	332	},
		333	MAN3PODS => {
		334	'EV.pm' => '$(INST_MAN3DIR)/EV.$(MAN3EXT)',
		335	'EV/MakeMaker.pm' => '$(INST_MAN3DIR)/EV::MakeMaker.$(MAN3EXT)',
		336	'libev/ev.pod' => '$(INST_MAN3DIR)/EV::libev.$(MAN3EXT)',
		337	},
153	);	338	);
154		339
155		340

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing EV/Makefile.PL (file contents): Revision 1.16 by root, Tue Nov 6 17:20:42 2007 UTC vs. Revision 1.58 by root, Sat Jun 22 15:50:36 2019 UTC

Diff Legend

Comparing EV/Makefile.PL (file contents):
Revision 1.16 by root, Tue Nov 6 17:20:42 2007 UTC vs.
Revision 1.58 by root, Sat Jun 22 15:50:36 2019 UTC