[ViewVC] Diff of: cvs/EV/Makefile.PL

Comparing EV/Makefile.PL (file contents):
Revision 1.17 by root, Thu Nov 8 00:44:17 2007 UTC vs.
Revision 1.57 by root, Sat Jun 20 11:11:01 2015 UTC

…		…
1	use 5.006;	1	use strict qw(vars subs);
2		2	use Canary::Stability EV => 1, 5.008002;
3	use Config;	3	use Config;
4	use ExtUtils::MakeMaker;	4	use ExtUtils::MakeMaker;
5		5
		6	sub have_inc($) {
		7	scalar grep -r "$_/$_[0]", $Config{usrinc}, split / /, $Config{incpth}
		8	}
		9
		10	my $DEFINE;
6		11
7	unless (-e "libev/ev_epoll.c") {	12	unless (-e "libev/ev_epoll.c") {
8	print <<EOF;	13	print <<EOF;
9		14
10	***	15	***
17	exit 1;	22	exit 1;
18	}	23	}
19		24
20	print <<EOF;	25	print <<EOF;
21		26
22
23	* * * * * * * * * * * * * * * * * *	27	* * * * * * * * * * * * * * * * * *
		28
24		29
25	Welcome to EV configuration. If you are in a hurry, just press return here	30	Welcome to EV configuration. If you are in a hurry, just press return here
26	and hope for the best. The defaults should usually do.	31	and hope for the best. The defaults should usually do.
27		32
28	EOF	33	EOF
…		…
31	$ENV{PERL_MM_USE_DEFAULT} = 1;	36	$ENV{PERL_MM_USE_DEFAULT} = 1;
32	}	37	}
33		38
34	print <<EOF;	39	print <<EOF;
35		40
36
37	* * * * * * * * * * * * * * * * * *	41	* * * * * * * * * * * * * * * * * *
		42
38		43
39	POSIX optionally offers support for a monotonic clock source. EV	44	POSIX optionally offers support for a monotonic clock source. EV
40	can take advantage of this clock source to detect time jumps	45	can take advantage of this clock source to detect time jumps more
41	reliably. Unfortunately, some systems are bound to be broken, so you can	46	reliably. Unfortunately, some systems are bound to be broken, so you can
42	disable this here: you can completely disable the detection and use of	47	disable this here: you can completely disable the detection and use of
43	the monotonic clock by answering 'n' here. Support for this clock type	48	the monotonic clock by answering 'n' here. Support for this clock type
44	will otherwise be autodetected at both compile- and runtime.	49	will otherwise be autodetected at both compile- and runtime. (this setting
		50	currently affects the use of nanosleep over select as well).
45		51
46	EOF	52	EOF
47		53
48	if (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/) {	54	unless (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/) {
49	$DEFINE .= " -DEV_USE_MONOTONIC";	55	$DEFINE .= " -DEV_USE_MONOTONIC=0";
50	}	56	}
51		57
52	print <<EOF;	58	print <<EOF;
53		59
54
55	* * * * * * * * * * * * * * * * * *	60	* * * * * * * * * * * * * * * * * *
		61
56		62
57	POSIX optionally offers support for a (potentially) high-resolution	63	POSIX optionally offers support for a (potentially) high-resolution
58	realtime clock interface. In a good implementation, using it is faster	64	realtime clock interface. In a good implementation, using it is faster
59	than the normal method of using gettimeofday. Unfortunately, this option	65	than the normal method of using gettimeofday. Unfortunately, this option
60	is also bound to be broken on some systems, so you can disable use and	66	is also bound to be broken on some systems, and current EV versions do not
61	probing of this feature altogether here. Otherwise support for this clock	67	actually call gettimeofday very often, so it defaults to no.
62	type will be autodetected at compiletime.
63		68
64	EOF	69	EOF
65		70
66	if (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "y") !~ /[yY]/) {	71	$DEFINE .= " -DEV_USE_REALTIME=" . (0 + (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "n") =~ /[yY]/));
		72
		73	print <<EOF;
		74
		75	* * * * * * * * * * * * * * * * * *
		76
		77
		78	EV can use various backends with various portability issues. The select
		79	backend is the most portable and makes for a good fallback, but it can be
		80	limited to a low number of file descriptors and/or might not compile. If
		81	you have problems with compiling ev_select.c, you might try to play around
		82	with disabling it here, or forcing it to use the fd_set provided by your
		83	OS, via the next question. I highly recommend keeping it in.
		84
		85	EOF
		86
		87	if (prompt ("Enable select backend (y/n)?", "y") =~ /[yY]/) {
67	$DEFINE .= " -DEV_USE_REALTIME=0";	88	$DEFINE .= " -DEV_USE_SELECT=1";
68	}
69		89
70	print <<EOF;	90	print <<EOF;
71		91
72
73	* * * * * * * * * * * * * * * * * *	92	* * * * * * * * * * * * * * * * * *
74		93
75	EV by default uses select, which makes it hard to write efficient servers,
76	especially if the number of active conencitons is much lower than the open
77	ones. GNU/Linux systems have a more scalable method called "epoll", which
78	EV can use. For this to work, both your kernel and glibc have to support
79	epoll, but if you can compile it, the detection will be done at runtime,
80	and EV will safely fall back to using select when epoll isn't available.
81	If unsure, accept the default.
82		94
83	EOF	95	The select backend can operate in two modes. One uses the system-provided
		96	fd_set and is usually limited to 1024 file descriptors (64 on windows),
		97	the other requires your header files to define NFDBITS and declare a
		98	suitable fd_mask type. If you run into problems compiling ev_select.c, you
		99	can try forcing the use of the system fd_set here.
84		100
85	if (prompt ("Enable epoll backend (y/n)?", (-e "/usr/include/sys/epoll.h") ? "y" : "n") =~ /[yY]/) {	101	EOF
		102
		103	if (prompt ("Force use of system fd_set for select backend (y/n)?", "n") =~ /[yY]/) {
		104	$DEFINE .= " -DEV_SELECT_USE_FD_SET";
		105	}
		106	} else {
86	$DEFINE .= " -DEV_USE_EPOLL";	107	$DEFINE .= " -DEV_USE_SELECT=0";
87	}	108	}
88		109
89	print <<EOF;	110	print <<EOF;
90		111
91
92	* * * * * * * * * * * * * * * * * *	112	* * * * * * * * * * * * * * * * * *
		113
		114
		115	The second very portable backend is poll(2). It does not exist on windows
		116	and various versions of Mac OS X (and on the other versions it simply
		117	doesn't work), but works basically everywhere else. It is recommended to use
		118	the default here unless you run into compile problems in ev_poll.c.
		119
		120	EOF
		121
		122	$DEFINE .= " -DEV_USE_POLL=" . (0 + (prompt ("Enable poll backend (y/n)?", (have_inc "poll.h") ? "y" : "n") =~ /[yY]/));
		123
		124	print <<EOF;
		125
		126	* * * * * * * * * * * * * * * * * *
		127
		128
		129	Select and poll make it hard to write efficient servers, especially if the
		130	number of active connections is much lower than the watched ones. GNU/Linux
		131	systems have a more scalable method called "epoll", which EV can use. For
		132	this to work, both your kernel and glibc have to support epoll, but if you
		133	can compile it, the detection will be done at runtime, and EV will safely
		134	fall back to using select when epoll isn't available. If unsure, accept
		135	the default.
		136
		137	EOF
		138
		139	my $can_epoll = have_inc "sys/epoll.h";
		140	$can_epoll = $ENV{EV_EPOLL} if exists $ENV{EV_EPOLL};
		141	$DEFINE .= " -DEV_USE_EPOLL=" . (0 + (prompt ("Enable epoll backend (y/n)?", $can_epoll ? "y" : "n") =~ /[yY]/));
		142
		143	print <<EOF;
		144
		145	* * * * * * * * * * * * * * * * * *
		146
93		147
94	Similarly to the epoll backend above, EV can take advantage of kqueue on	148	Similarly to the epoll backend above, EV can take advantage of kqueue on
95	many BSD systems (it seems to be broken on Mac OS X though). The kqueue
96	backend has not been tested, however, so it is disabled by default. Please
97	test (and preferably fix) the kqueue backend when you have a machine
98	supporting it. Support for kqueue will be detected at runtime, with a	149	many BSD systems. Support for kqueue will be detected at runtime, with a
99	safe fallback to other methods when it cannot be used.	150	safe fallback to other methods when it cannot be used.
100		151
101	EOF	152	Note that kqueue is broken on most operating systems, so by default it
		153	won't be used on many platforms, but you can still create your own event
		154	loop with kqueue backend if you ask specifically for it.
102		155
103	if (prompt ("Enable kqueue backend (y/n)?", (-e "/usr/include/sys/event.h") ? "y" : "n") =~ /[yY]/) {	156	Here is what we know:
104	$DEFINE .= " -DEV_USE_KQUEUE";
105	}
106		157
107	print <<EOF;	158	NetBSD: partially working in at least 3.1 and later. Yeah! :)
		159	FreeBSD: broken on at least 6.2-STABLE, spotty in later versions,
		160	sockets likely work, ptys definitely don't.
		161	OpenBSD: reports indicate that it likely doesn't work
		162	(similar problems as on FreeBSD).
		163	OS X: completely, utterly broken on at least <= 10.6.
108		164
		165	EOF
109		166
		167	my $can_kqueue = have_inc "sys/event.h";
		168	$can_kqueue = $ENV{EV_KQUEUE} if exists $ENV{EV_KQUEUE};
		169	$DEFINE .= " -DEV_USE_KQUEUE=" . (0 + (prompt ("Enable kqueue backend (y/n)?", $can_kqueue ? "y" : "n") =~ /[yY]/));
		170
		171	print <<EOF;
		172
110	* * * * * * * * * * * * * * * * * *	173	* * * * * * * * * * * * * * * * * *
		174
		175
		176	Similarly to the kqueue backend above, EV can take advantage of the
		177	solaris 10 event port interface. Support for event ports will be detected
		178	at runtime, with a safe fallback to other methods when it cannot be used.
		179
		180	EOF
		181
		182	$DEFINE .= " -DEV_USE_PORT=" . (0 + (prompt ("Enable event port backend (y/n)?", (have_inc "sys/port.h") ? "y" : "n") =~ /[yY]/));
		183
		184	print <<EOF;
		185
		186	* * * * * * * * * * * * * * * * * *
		187
111		188
112	EV needs the functions pthread_atfork and clock_gettime. On most systems	189	EV needs the functions pthread_atfork and clock_gettime. On most systems
113	you need some special libraries for this (such as -lrt and -lpthread). You	190	you need some special libraries for this (such as -lrt and -lpthread). You
114	can specify additional libraries to provide these calls now, or accept the	191	can specify additional libraries to provide these calls (and any other
115	default.	192	required by EV) now, or accept the default.
116		193
117	EOF	194	On GNU/Linux systems, EV uses the LSB 3.1 __register_atfork function
		195	to avoid the dependency on libpthread, and directly uses the clock_gettime
		196	syscall to avoid a dependency on librt.
118		197
		198	EOF
		199
		200	my $solaris_libs = $^O =~ /solaris/i ? "-lsocket -lnsl" : "";
		201	my $librt = $^O =~ /linux/i ? "" : "-lpthread -lrt";
		202	my $LIBS = exists $ENV{EV_LIBS} ? $ENV{EV_LIBS} : "$librt $solaris_libs";
119	$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", "-lpthread -lrt";	203	$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", $LIBS;
120		204
121		205
122	print <<EOF;	206	print <<EOF;
123		207
124
125	* * * * * * * * * * * * * * * * * *	208	* * * * * * * * * * * * * * * * * *
126		209
		210
		211	A backend of a different kind is the Linux inotify(7) interface, which can
		212	be used to speed up (and reduce resource consumption) of stat watchers. If
		213	you have the include file and libc support for it, it is usually a good
		214	idea to enable it, as kernel availability is detected at runtime.
		215
127	EOF	216	EOF
		217
		218	my $can_inotify = have_inc "sys/inotify.h";
		219	$can_inotify = $ENV{EV_INOTIFY} if exists $ENV{EV_INOTIFY};
		220	$DEFINE .= " -DEV_USE_INOTIFY=" . (0 + (prompt ("Enable inotify support (y/n)?", $can_inotify ? "y" : "n") =~ /[yY]/));
		221
		222	print <<EOF;
		223
		224	* * * * * * * * * * * * * * * * * *
		225
		226
		227	Another useful bit of functionality is the Linux eventfd, which is useful
		228	for faster signal handling (don't care) and intra-thread communications
		229	(more relevant). Kernel support for this will be probed at runtime, but
		230	your libc must contain the necessary wrapper. Glibc 2.7 and later should
		231	have this wrapper.
		232
		233	EOF
		234
		235	my $can_eventfd = have_inc "sys/eventfd.h";
		236	$can_eventfd = $ENV{EV_EVENTFD} if exists $ENV{EV_EVENTFD};
		237	$DEFINE .= " -DEV_USE_EVENTFD=" . (0 + (prompt ("Enable linux eventfd support (y/n)?", $can_eventfd ? "y" : "n") =~ /[yY]/));
		238
		239	print <<EOF;
		240
		241	* * * * * * * * * * * * * * * * * *
		242
		243
		244	Another sometimes useful bit of functionality is the Linux signalfd, which
		245	is useful for faster signal handling (don't care). Kernel support for
		246	this will be probed at runtime, but your libc must contain the necessary
		247	wrapper. Glibc 2.7 and later should have this wrapper.
		248
		249	EOF
		250
		251	my $can_signalfd = have_inc "sys/signalfd.h";
		252	$can_signalfd = $ENV{EV_SIGNALFD} if exists $ENV{EV_SIGNALFD};
		253	$DEFINE .= " -DEV_USE_SIGNALFD=" . (0 + (prompt ("Enable linux signalfd support (y/n)?", $can_signalfd ? "y" : "n") =~ /[yY]/));
		254
		255	print <<EOF;
		256
		257	* * * * * * * * * * * * * * * * * *
		258
		259
		260	Very rarely, people want to tweak EV even more, e.g. to exclude
		261	or include certain watcher types or backends. This can be done by adding
		262	extra -D options here, or via the EV_EXTRA_DEFS environment variable.
		263
		264	For example, if you run into compile problems because of missing memory
		265	fences (or you just want extra performance), you can tell EV to not support
		266	smp and threads via -DEV_NO_THREADS.
		267
		268	Normal persons just press enter.
		269
		270	EOF
		271
		272	$DEFINE .= " " . prompt "Any extra -D options?", "$ENV{EV_EXTRA_DEFS}";
		273
		274	print <<EOF;
		275
		276	* * * * * * * * * * * * * * * * * *
		277
		278
		279	EOF
		280
		281	my @anyevent = eval { require AnyEvent; $AnyEvent::VERSION < 5.29 } ? (AnyEvent => 5.29) : ();
128		282
129	WriteMakefile(	283	WriteMakefile(
130	dist => {	284	dist => {
131	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',	285	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',
132	COMPRESS => 'gzip -9v',	286	COMPRESS => 'gzip -9v',
133	SUFFIX => '.gz',	287	SUFFIX => '.gz',
134	},	288	},
135	depend => {	289	depend => {
136	"EV.c" => "EV/EVAPI.h "	290	"EV.c" => "EV/EVAPI.h "
137	. "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c "	291	. "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c "
138	. "libev/event.h libev/event.c libev/evdns.h libev/evdns.c",	292	. "libev/ev_vars.h libev/ev_wrap.h",
139	},	293	},
140	INC => "-Ilibev",	294	INC => "-Ilibev",
141	DEFINE => "$DEFINE",	295	DEFINE => "$DEFINE",
142	NAME => "EV",	296	NAME => "EV",
143	LIBS => [$LIBS],	297	LIBS => [$LIBS],
		298	PREREQ_PM => {
		299	@anyevent,
		300	"common::sense" => 0,
		301	},
		302	CONFIGURE_REQUIRES => { "ExtUtils::MakeMaker" => 6.52, "Canary::Stability" => 0 },
144	VERSION_FROM => "EV.pm",	303	VERSION_FROM => "EV.pm",
145	PM => {	304	PM => {
146	'EV.pm' => '$(INST_LIBDIR)/EV.pm',	305	'EV.pm' => '$(INST_LIB)/EV.pm',
147	'EV/AnyEvent.pm' => '$(INST_LIBDIR)/EV/AnyEvent.pm',
148	'EV/DNS.pm' => '$(INST_LIBDIR)/EV/DNS.pm',
149	'EV/EVAPI.h' => '$(INST_LIBDIR)/EV/EVAPI.h',	306	'EV/EVAPI.h' => '$(INST_LIB)/EV/EVAPI.h',
150	'EV/MakeMaker.pm' => '$(INST_LIBDIR)/EV/MakeMaker.pm',	307	'EV/MakeMaker.pm' => '$(INST_LIB)/EV/MakeMaker.pm',
151	'libev/ev.h' => '$(INST_LIBDIR)/EV/ev.h',	308	'libev/ev.h' => '$(INST_LIB)/EV/ev.h',
		309	'libev/ev.pod' => '$(INST_LIB)/EV/libev.pod',
152	},	310	},
		311	MAN3PODS => {
		312	'EV.pm' => '$(INST_MAN3DIR)/EV.$(MAN3EXT)',
		313	'EV/MakeMaker.pm' => '$(INST_MAN3DIR)/EV::MakeMaker.$(MAN3EXT)',
		314	'libev/ev.pod' => '$(INST_MAN3DIR)/EV::libev.$(MAN3EXT)',
		315	},
153	);	316	);
154		317
155		318

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing EV/Makefile.PL (file contents): Revision 1.17 by root, Thu Nov 8 00:44:17 2007 UTC vs. Revision 1.57 by root, Sat Jun 20 11:11:01 2015 UTC

Diff Legend

Comparing EV/Makefile.PL (file contents):
Revision 1.17 by root, Thu Nov 8 00:44:17 2007 UTC vs.
Revision 1.57 by root, Sat Jun 20 11:11:01 2015 UTC