[ViewVC] Diff of: cvs/EV/Makefile.PL

Comparing EV/Makefile.PL (file contents):
Revision 1.28 by root, Fri Dec 21 04:41:12 2007 UTC vs.
Revision 1.62 by root, Thu Jul 11 08:51:48 2019 UTC

…		…
1	use 5.006;	1	use strict qw(vars subs);
2		2	use Canary::Stability EV => 1, 5.008002;
3	use Config;	3	use Config;
4	use ExtUtils::MakeMaker;	4	use ExtUtils::MakeMaker;
5		5
		6	sub have_inc($) {
		7	scalar grep -r "$_/$_[0]", $Config{usrinc}, split / /, $Config{incpth}
		8	}
		9
		10	my $DEFINE;
		11
6	unless (-e "libev/ev_epoll.c") {	12	unless (-e "libev/ev_linuxaio.c") {
7	print <<EOF;	13	print <<EOF;
8		14
9	***	15	***
10	*** ERROR: libev is missing or damaged. If you used a CVS check-out of EV,	16	*** ERROR: libev is missing or damaged. If you used a CVS check-out of EV,
11	*** you also have to check-out the "libev" module from the same CVS	17	*** you also have to check-out the "libev" module from the same CVS
34		40
35	* * * * * * * * * * * * * * * * * *	41	* * * * * * * * * * * * * * * * * *
36		42
37		43
38	POSIX optionally offers support for a monotonic clock source. EV	44	POSIX optionally offers support for a monotonic clock source. EV
39	can take advantage of this clock source to detect time jumps	45	can take advantage of this clock source to detect time jumps more
40	reliably. Unfortunately, some systems are bound to be broken, so you can	46	reliably. Unfortunately, some systems are bound to be broken, so you can
41	disable this here: you can completely disable the detection and use of	47	disable this here: you can completely disable the detection and use of
42	the monotonic clock by answering 'n' here. Support for this clock type	48	the monotonic clock by answering 'n' here. Support for this clock type
43	will otherwise be autodetected at both compile- and runtime.	49	will otherwise be autodetected at both compile- and runtime. (this setting
		50	currently affects the use of nanosleep over select as well).
44		51
45	EOF	52	EOF
46		53
47	$DEFINE .= " -DEV_USE_MONOTONIC=" . (0 + (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/));	54	unless (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/) {
		55	$DEFINE .= " -DEV_USE_MONOTONIC=0";
		56	}
48		57
49	print <<EOF;	58	print <<EOF;
50		59
51	* * * * * * * * * * * * * * * * * *	60	* * * * * * * * * * * * * * * * * *
52		61
53		62
54	POSIX optionally offers support for a (potentially) high-resolution	63	POSIX optionally offers support for a (potentially) high-resolution
55	realtime clock interface. In a good implementation, using it is faster	64	realtime clock interface. In a good implementation, using it is faster
56	than the normal method of using gettimeofday. Unfortunately, this option	65	than the normal method of using gettimeofday. Unfortunately, this option
57	is also bound to be broken on some systems, so you can disable use and	66	is also bound to be broken on some systems, and current EV versions do not
58	probing of this feature altogether here. Otherwise support for this clock	67	actually call gettimeofday very often, so it defaults to no.
59	type will be autodetected at compiletime.
60		68
61	EOF	69	EOF
62		70
63	$DEFINE .= " -DEV_USE_REALTIME=" . (0 + (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "y") =~ /[yY]/));	71	$DEFINE .= " -DEV_USE_REALTIME=" . (0 + (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "n") =~ /[yY]/));
64		72
65	print <<EOF;	73	print <<EOF;
66		74
67	* * * * * * * * * * * * * * * * * *	75	* * * * * * * * * * * * * * * * * *
68		76
69		77
70	EV can use various backends with various portability issue. The select	78	EV can use various backends with various portability issues. The select
71	backend is the most portable and makes for a good fallback, but it can be	79	backend is the most portable and makes for a good fallback, but it can be
72	limited to a low number of file descriptors and/or might not compile. If	80	limited to a low number of file descriptors and/or might not compile. If
73	you have problems with compiling ev_select.c, you might try to play around	81	you have problems with compiling ev_select.c, you might try to play around
74	with disabling it here, or forcing it to use the fd_set provided by your	82	with disabling it here, or forcing it to use the fd_set provided by your
75	OS, via the next question. I highly recommend keeping it in.	83	OS, via the next question. I highly recommend keeping it in.
…		…
92		100
93	EOF	101	EOF
94		102
95	if (prompt ("Force use of system fd_set for select backend (y/n)?", "n") =~ /[yY]/) {	103	if (prompt ("Force use of system fd_set for select backend (y/n)?", "n") =~ /[yY]/) {
96	$DEFINE .= " -DEV_SELECT_USE_FD_SET";	104	$DEFINE .= " -DEV_SELECT_USE_FD_SET";
97	}	105	}
98	} else {	106	} else {
99	$DEFINE .= " -DEV_USE_SELECT=0";	107	$DEFINE .= " -DEV_USE_SELECT=0";
100	}	108	}
101		109
102	print <<EOF;	110	print <<EOF;
103		111
104	* * * * * * * * * * * * * * * * * *	112	* * * * * * * * * * * * * * * * * *
105		113
…		…
109	doesn't work), but works basically everywhere else. It is recommended to use	117	doesn't work), but works basically everywhere else. It is recommended to use
110	the default here unless you run into compile problems in ev_poll.c.	118	the default here unless you run into compile problems in ev_poll.c.
111		119
112	EOF	120	EOF
113		121
114	$DEFINE .= " -DEV_USE_POLL=" . (0 + (prompt ("Enable poll backend (y/n)?", (-e "/usr/include/poll.h") ? "y" : "n") =~ /[yY]/));	122	$DEFINE .= " -DEV_USE_POLL=" . (0 + (prompt ("Enable poll backend (y/n)?", (have_inc "poll.h") ? "y" : "n") =~ /[yY]/));
115		123
116	print <<EOF;	124	print <<EOF;
117		125
118	* * * * * * * * * * * * * * * * * *	126	* * * * * * * * * * * * * * * * * *
119		127
…		…
126	fall back to using select when epoll isn't available. If unsure, accept	134	fall back to using select when epoll isn't available. If unsure, accept
127	the default.	135	the default.
128		136
129	EOF	137	EOF
130		138
		139	my $can_epoll = have_inc "sys/epoll.h";
		140	$can_epoll = $ENV{EV_EPOLL} if exists $ENV{EV_EPOLL};
131	$DEFINE .= " -DEV_USE_EPOLL=" . (0 + (prompt ("Enable epoll backend (y/n)?", (-e "/usr/include/sys/epoll.h") ? "y" : "n") =~ /[yY]/));	141	$DEFINE .= " -DEV_USE_EPOLL=" . (0 + (prompt ("Enable epoll backend (y/n)?", $can_epoll ? "y" : "n") =~ /[yY]/));
		142
		143	print <<EOF;
		144
		145	* * * * * * * * * * * * * * * * * *
		146
		147
		148	Linux 4.18 introduced another event polling interface, this time using
		149	the Linux AIO API. While this API is far superior to epoll and almost
		150	rivals kqueue, it also suffers from the same issues as kqueue typically
		151	does: only a subset of file types are supported (as of 4.19, I have seen
		152	eventfd, pipes, sockets files and some devices, but no ttys). It also
		153	is subject arbitrary system-wide limits imposed on it. Therefore, this
		154	backend is not used by default, even when it is compiled in, and you have
		155	to request it explicitly, e.g. with LIBEV_FLAGS=64. If unsure, accept the
		156	default.
		157
		158	EOF
		159
		160	my $can_linuxaio = have_inc "linux/aio_abi.h";
		161	$can_linuxaio = $ENV{EV_LINUXAIO} if exists $ENV{EV_LINUXAIO};
		162	$can_linuxaio = 0 + (prompt ("Enable linux aio backend (y/n)?", $can_linuxaio ? "y" : "n") =~ /[yY]/);
		163	$DEFINE .= " -DEV_USE_LINUXAIO=$can_linuxaio";
		164
		165	if ($can_linuxaio) {
		166	print <<EOF;
		167
		168	* * * * * * * * * * * * * * * * * *
		169
		170
		171	The previously mentioned Linux AIO backend is experimental and will not
		172	be used unless requested explicitly. You can, howeer, choose to make ti a
		173	recommended basckend, which means it will be chosen if available even when
		174	not explicitly asked for, in preference to epoll on GNU/Linux. This option
		175	is likely temporary. When unsure, accept the default.
		176
		177	EOF
		178
		179	my $recommend_linuxaio = 0;
		180	$recommend_linuxaio = $ENV{EV_RECOMMEND_LINUXAIO} if exists $ENV{EV_RECOMMEND_LINUXAIO};
		181	$recommend_linuxaio = 0 + (prompt ("Treat linux aio as a recommended backend (y/n)?", $recommend_linuxaio ? "y" : "n") =~ /[yY]/);
		182	$DEFINE .= " -DEV_RECOMMEND_LINUXAIO=$recommend_linuxaio";
		183	}
132		184
133	print <<EOF;	185	print <<EOF;
134		186
135	* * * * * * * * * * * * * * * * * *	187	* * * * * * * * * * * * * * * * * *
136		188
137		189
138	Similarly to the epoll backend above, EV can take advantage of kqueue on	190	Similarly to the epoll backend above, EV can take advantage of kqueue on
139	many BSD systems. Support for kqueue will be detected at runtime, with a	191	many BSD systems. Support for kqueue will be detected at runtime, with a
140	safe fallback to other methods when it cannot be used.	192	safe fallback to other methods when it cannot be used.
141		193
142	Note that kqueue is broken on most operating systems, so it defaults to	194	Note that kqueue is broken on most operating systems, so by default it
143	'n' on everything but netbsd. Here is what we know:	195	won't be used on many platforms, but you can still create your own event
		196	loop with kqueue backend if you ask specifically for it.
144		197
		198	Here is what we know:
		199
145	NetBSD: partially working in at least 3.1. Yeah! :)	200	NetBSD: partially working in at least 3.1 and later. Yeah! :)
146	FreeBSD: broken on at least 6.2-STABLE,	201	FreeBSD: broken on at least 6.2-STABLE, spotty in later versions,
147	sockets likely work, ptys definitely don't.	202	sockets likely work, ptys definitely don't.
148	OpenBSD: reports indicate that it likely doesn't work	203	OpenBSD: reports indicate that it likely doesn't work
149	(similar problems as on FreeBSD).	204	(similar problems as on FreeBSD).
150	OS X: completely, utterly broken on at least < 10.5.	205	OS X: completely, utterly broken on at least <= 10.6.
151		206
152	EOF	207	EOF
153		208
154	my $can_kqueue = -e "/usr/include/sys/event.h";	209	my $can_kqueue = have_inc "sys/event.h";
155		210	$can_kqueue = $ENV{EV_KQUEUE} if exists $ENV{EV_KQUEUE};
156	$DEFINE .= " -DEV_USE_KQUEUE=" . (0 + (prompt ("Enable kqueue backend (y/n)?", $can_kqueue ? "y" : "n") =~ /[yY]/));	211	$DEFINE .= " -DEV_USE_KQUEUE=" . (0 + (prompt ("Enable kqueue backend (y/n)?", $can_kqueue ? "y" : "n") =~ /[yY]/));
157		212
158	print <<EOF;	213	print <<EOF;
159		214
160	* * * * * * * * * * * * * * * * * *	215	* * * * * * * * * * * * * * * * * *
…		…
164	solaris 10 event port interface. Support for event ports will be detected	219	solaris 10 event port interface. Support for event ports will be detected
165	at runtime, with a safe fallback to other methods when it cannot be used.	220	at runtime, with a safe fallback to other methods when it cannot be used.
166		221
167	EOF	222	EOF
168		223
169	$DEFINE .= " -DEV_USE_PORT=" . (0 + (prompt ("Enable event port backend (y/n)?", (-e "/usr/include/sys/port.h") ? "y" : "n") =~ /[yY]/));	224	$DEFINE .= " -DEV_USE_PORT=" . (0 + (prompt ("Enable event port backend (y/n)?", (have_inc "sys/port.h") ? "y" : "n") =~ /[yY]/));
170		225
171	print <<EOF;	226	print <<EOF;
172		227
173	* * * * * * * * * * * * * * * * * *	228	* * * * * * * * * * * * * * * * * *
174		229
…		…
176	EV needs the functions pthread_atfork and clock_gettime. On most systems	231	EV needs the functions pthread_atfork and clock_gettime. On most systems
177	you need some special libraries for this (such as -lrt and -lpthread). You	232	you need some special libraries for this (such as -lrt and -lpthread). You
178	can specify additional libraries to provide these calls (and any other	233	can specify additional libraries to provide these calls (and any other
179	required by EV) now, or accept the default.	234	required by EV) now, or accept the default.
180		235
181	EOF	236	On GNU/Linux systems, EV uses the LSB 3.1 __register_atfork function
		237	to avoid the dependency on libpthread, and directly uses the clock_gettime
		238	syscall to avoid a dependency on librt.
182		239
		240	EOF
		241
183	$SOLARIS_LIBS = $^O =~ /solaris/ ? " -lsocket -lnsl" : "";	242	my $solaris_libs = $^O =~ /solaris/i ? "-lsocket -lnsl" : "";
184		243	my $librt = $^O =~ /linux/i ? "" : "-lpthread -lrt";
		244	my $LIBS = exists $ENV{EV_LIBS} ? $ENV{EV_LIBS} : "$librt $solaris_libs";
185	$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", "-lpthread -lrt$SOLARIS_LIBS";	245	$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", $LIBS;
186		246
187		247
188	print <<EOF;	248	print <<EOF;
189		249
190	* * * * * * * * * * * * * * * * * *	250	* * * * * * * * * * * * * * * * * *
191		251
192		252
193	A backend of a different kind is the Linux inotify(7) interface, which can	253	A backend of a different kind is the Linux inotify(7) interface, which can
194	be used to speed up (and reduce resource consumption) of stat watchers. If	254	be used to speed up (and reduce resource consumption) of stat watchers. If
195	you have it, it is usually a good idea to enable it.	255	you have the include file and libc support for it, it is usually a good
		256	idea to enable it, as kernel availability is detected at runtime.
196		257
197	EOF	258	EOF
198		259
199	my $can_inotify = -e "/usr/include/sys/inotify.h";	260	my $can_inotify = have_inc "sys/inotify.h";
200		261	$can_inotify = $ENV{EV_INOTIFY} if exists $ENV{EV_INOTIFY};
201	$DEFINE .= " -DEV_USE_INOTIFY=" . (0 + (prompt ("Enable inotify support (y/n)?", $can_inotify ? "y" : "n") =~ /[yY]/));	262	$DEFINE .= " -DEV_USE_INOTIFY=" . (0 + (prompt ("Enable inotify support (y/n)?", $can_inotify ? "y" : "n") =~ /[yY]/));
202		263
203	print <<EOF;	264	print <<EOF;
204		265
205	* * * * * * * * * * * * * * * * * *	266	* * * * * * * * * * * * * * * * * *
206		267
207		268
208	EOF	269	Another useful bit of functionality is the Linux eventfd, which is useful
		270	for faster signal handling (don't care) and intra-thread communications
		271	(more relevant). Kernel support for this will be probed at runtime, but
		272	your libc must contain the necessary wrapper. Glibc 2.7 and later should
		273	have this wrapper.
209		274
		275	EOF
		276
		277	my $can_eventfd = have_inc "sys/eventfd.h";
		278	$can_eventfd = $ENV{EV_EVENTFD} if exists $ENV{EV_EVENTFD};
		279	$DEFINE .= " -DEV_USE_EVENTFD=" . (0 + (prompt ("Enable linux eventfd support (y/n)?", $can_eventfd ? "y" : "n") =~ /[yY]/));
		280
		281	print <<EOF;
		282
		283	* * * * * * * * * * * * * * * * * *
		284
		285
		286	Another sometimes useful bit of functionality is the Linux signalfd, which
		287	is useful for faster signal handling (don't care). Kernel support for
		288	this will be probed at runtime, but your libc must contain the necessary
		289	wrapper. Glibc 2.7 and later should have this wrapper.
		290
		291	EOF
		292
		293	my $can_signalfd = have_inc "sys/signalfd.h";
		294	$can_signalfd = $ENV{EV_SIGNALFD} if exists $ENV{EV_SIGNALFD};
		295	$DEFINE .= " -DEV_USE_SIGNALFD=" . (0 + (prompt ("Enable linux signalfd support (y/n)?", $can_signalfd ? "y" : "n") =~ /[yY]/));
		296
		297	print <<EOF;
		298
		299	* * * * * * * * * * * * * * * * * *
		300
		301
		302	Libev contains numerous internal assert() invocations to check for
		303	consistency and user errors. These are normally enabled, but most
		304	perl builds disable this error reporting mechanism by default. You
		305	can re-enable these asserts here. Enabling them might help you catch
		306	programming bugs earlier, but might cause a small slowdown. Also, failures
		307	will be reported by aboritng your program, instead of throwing a perl
		308	exception.
		309
		310	If unsure, enable this if you only use this perl installation for
		311	development, and leave it off for use in production environments.
		312
		313	EOF
		314
		315	my $enable_assertions = 0;
		316	$enable_assertions = 0 + (prompt ("Make sure assertions are enabled? (y/n)?", $enable_assertions ? "y" : "n") =~ /[yY]/);
		317	$DEFINE .= " -DEV_ENABLE_ASERTIONS=1" if $enable_assertions;
		318
		319	print <<EOF;
		320
		321	* * * * * * * * * * * * * * * * * *
		322
		323
		324	Very rarely, people want to tweak EV even more, e.g. to exclude
		325	or include certain watcher types or backends. This can be done by adding
		326	extra -D options here, or via the EV_EXTRA_DEFS environment variable.
		327
		328	For example, if you run into compile problems because of missing memory
		329	fences (or you just want extra performance), you can tell EV to not support
		330	smp and threads via -DEV_NO_THREADS.
		331
		332	Normal persons just press enter.
		333
		334	EOF
		335
		336	$DEFINE .= " " . prompt "Any extra -D options?", "$ENV{EV_EXTRA_DEFS}";
		337
		338	print <<EOF;
		339
		340	* * * * * * * * * * * * * * * * * *
		341
		342
		343	EOF
		344
210	my @anyevent = eval { require AnyEvent; $AnyEvent::VERSION < 2.6 } ? (AnyEvent => 2.6) : ();	345	my @anyevent = eval { require AnyEvent; $AnyEvent::VERSION < 5.29 } ? (AnyEvent => 5.29) : ();
211		346
212	WriteMakefile(	347	WriteMakefile(
213	dist => {	348	dist => {
214	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',	349	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',
215	COMPRESS => 'gzip -9v',	350	COMPRESS => 'gzip -9v',
216	SUFFIX => '.gz',	351	SUFFIX => '.gz',
217	},	352	},
218	depend => {	353	depend => {
219	"EV.c" => "EV/EVAPI.h "	354	"EV.c" => "EV/EVAPI.h "
220	. "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c "	355	. "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c libev/ev_linuxaio.c "
221	. "libev/event.h libev/event.c libev/ev_vars.h libev/ev_wrap.h",	356	. "libev/ev_vars.h libev/ev_wrap.h",
222	},	357	},
223	INC => "-Ilibev",	358	INC => "-Ilibev",
224	DEFINE => "$DEFINE",	359	DEFINE => "$DEFINE",
225	NAME => "EV",	360	NAME => "EV",
226	LIBS => [$LIBS],	361	LIBS => [$LIBS],
227	PREREQ_PM => {	362	PREREQ_PM => {
228	@anyevent,	363	@anyevent,
		364	"common::sense" => 0,
229	},	365	},
		366	CONFIGURE_REQUIRES => { "ExtUtils::MakeMaker" => 6.52, "Canary::Stability" => 0 },
230	VERSION_FROM => "EV.pm",	367	VERSION_FROM => "EV.pm",
231	PM => {	368	PM => {
232	'EV.pm' => '$(INST_LIBDIR)/EV.pm',	369	'EV.pm' => '$(INST_LIB)/EV.pm',
233	'EV/EVAPI.h' => '$(INST_LIBDIR)/EV/EVAPI.h',	370	'EV/EVAPI.h' => '$(INST_LIB)/EV/EVAPI.h',
234	'EV/MakeMaker.pm' => '$(INST_LIBDIR)/EV/MakeMaker.pm',	371	'EV/MakeMaker.pm' => '$(INST_LIB)/EV/MakeMaker.pm',
235	'libev/ev.h' => '$(INST_LIBDIR)/EV/ev.h',	372	'libev/ev.h' => '$(INST_LIB)/EV/ev.h',
		373	'libev/ev.pod' => '$(INST_LIB)/EV/libev.pod',
236	},	374	},
		375	MAN3PODS => {
		376	'EV.pm' => '$(INST_MAN3DIR)/EV.$(MAN3EXT)',
		377	'EV/MakeMaker.pm' => '$(INST_MAN3DIR)/EV::MakeMaker.$(MAN3EXT)',
		378	'libev/ev.pod' => '$(INST_MAN3DIR)/EV::libev.$(MAN3EXT)',
		379	},
237	);	380	);
238		381
239

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing EV/Makefile.PL (file contents): Revision 1.28 by root, Fri Dec 21 04:41:12 2007 UTC vs. Revision 1.62 by root, Thu Jul 11 08:51:48 2019 UTC

Diff Legend

Comparing EV/Makefile.PL (file contents):
Revision 1.28 by root, Fri Dec 21 04:41:12 2007 UTC vs.
Revision 1.62 by root, Thu Jul 11 08:51:48 2019 UTC