[ViewVC] Diff of: cvs/EV/Makefile.PL

Comparing EV/Makefile.PL (file contents):
Revision 1.5 by root, Mon Oct 29 08:48:07 2007 UTC vs.
Revision 1.29 by root, Sat Dec 22 05:47:52 2007 UTC

1	use 5.006;	1	use 5.006;
2		2
		3	use Config;
3	use ExtUtils::MakeMaker;	4	use ExtUtils::MakeMaker;
4		5
		6	unless (-e "libev/ev_epoll.c") {
5	print <<EOF;	7	print <<EOF;
6		8
7	***	9	***
8	*** You need to install libevent (http://monkey.org/~provos/libevent/) separately	10	*** ERROR: libev is missing or damaged. If you used a CVS check-out of EV,
9	*** first in a way so that the Makefile.PL can find both -levent and the event.h	11	*** you also have to check-out the "libev" module from the same CVS
10	*** and evdns.h include files.	12	*** repository into the EV dir (i.e. EV/libev from outside).
11	***	13	***
12	*** Version 1.3e or higher is recommended, but older 1.3 versions likely work too.
13	***
14		14
15	EOF	15	EOF
		16	exit 1;
		17	}
		18
		19	print <<EOF;
		20
		21	* * * * * * * * * * * * * * * * * *
		22
		23
		24	Welcome to EV configuration. If you are in a hurry, just press return here
		25	and hope for the best. The defaults should usually do.
		26
		27	EOF
		28
		29	if (prompt ("Skip further questions and use defaults (y/n)?", "y") =~ /[yY]/) {
		30	$ENV{PERL_MM_USE_DEFAULT} = 1;
		31	}
		32
		33	print <<EOF;
		34
		35	* * * * * * * * * * * * * * * * * *
		36
		37
		38	POSIX optionally offers support for a monotonic clock source. EV
		39	can take advantage of this clock source to detect time jumps
		40	reliably. Unfortunately, some systems are bound to be broken, so you can
		41	disable this here: you can completely disable the detection and use of
		42	the monotonic clock by answering 'n' here. Support for this clock type
		43	will otherwise be autodetected at both compile- and runtime. (this setting
		44	currently affects the use of nanosleep over select as well).
		45
		46	EOF
		47
		48	$DEFINE .= " -DEV_USE_MONOTONIC=" . (0 + (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/));
		49
		50	print <<EOF;
		51
		52	* * * * * * * * * * * * * * * * * *
		53
		54
		55	POSIX optionally offers support for a (potentially) high-resolution
		56	realtime clock interface. In a good implementation, using it is faster
		57	than the normal method of using gettimeofday. Unfortunately, this option
		58	is also bound to be broken on some systems, so you can disable use and
		59	probing of this feature altogether here. Otherwise support for this clock
		60	type will be autodetected at compiletime.
		61
		62	EOF
		63
		64	$DEFINE .= " -DEV_USE_REALTIME=" . (0 + (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "y") =~ /[yY]/));
		65
		66	print <<EOF;
		67
		68	* * * * * * * * * * * * * * * * * *
		69
		70
		71	EV can use various backends with various portability issue. The select
		72	backend is the most portable and makes for a good fallback, but it can be
		73	limited to a low number of file descriptors and/or might not compile. If
		74	you have problems with compiling ev_select.c, you might try to play around
		75	with disabling it here, or forcing it to use the fd_set provided by your
		76	OS, via the next question. I highly recommend keeping it in.
		77
		78	EOF
		79
		80	if (prompt ("Enable select backend (y/n)?", "y") =~ /[yY]/) {
		81	$DEFINE .= " -DEV_USE_SELECT=1";
		82
		83	print <<EOF;
		84
		85	* * * * * * * * * * * * * * * * * *
		86
		87
		88	The select backend can operate in two modes. One uses the system-provided
		89	fd_set and is usually limited to 1024 file descriptors (64 on windows),
		90	the other requires your header files to define NFDBITS and declare a
		91	suitable fd_mask type. If you run into problems compiling ev_select.c, you
		92	can try forcing the use of the system fd_set here.
		93
		94	EOF
		95
		96	if (prompt ("Force use of system fd_set for select backend (y/n)?", "n") =~ /[yY]/) {
		97	$DEFINE .= " -DEV_SELECT_USE_FD_SET";
		98	}
		99	} else {
		100	$DEFINE .= " -DEV_USE_SELECT=0";
		101	}
		102
		103	print <<EOF;
		104
		105	* * * * * * * * * * * * * * * * * *
		106
		107
		108	The second very portable backend is poll(2). It does not exist on windows
		109	and various versions of Mac OS X (and on the other versions it simply
		110	doesn't work), but works basically everywhere else. It is recommended to use
		111	the default here unless you run into compile problems in ev_poll.c.
		112
		113	EOF
		114
		115	$DEFINE .= " -DEV_USE_POLL=" . (0 + (prompt ("Enable poll backend (y/n)?", (-e "/usr/include/poll.h") ? "y" : "n") =~ /[yY]/));
		116
		117	print <<EOF;
		118
		119	* * * * * * * * * * * * * * * * * *
		120
		121
		122	Select and poll make it hard to write efficient servers, especially if the
		123	number of active connections is much lower than the watched ones. GNU/Linux
		124	systems have a more scalable method called "epoll", which EV can use. For
		125	this to work, both your kernel and glibc have to support epoll, but if you
		126	can compile it, the detection will be done at runtime, and EV will safely
		127	fall back to using select when epoll isn't available. If unsure, accept
		128	the default.
		129
		130	EOF
		131
		132	$DEFINE .= " -DEV_USE_EPOLL=" . (0 + (prompt ("Enable epoll backend (y/n)?", (-e "/usr/include/sys/epoll.h") ? "y" : "n") =~ /[yY]/));
		133
		134	print <<EOF;
		135
		136	* * * * * * * * * * * * * * * * * *
		137
		138
		139	Similarly to the epoll backend above, EV can take advantage of kqueue on
		140	many BSD systems. Support for kqueue will be detected at runtime, with a
		141	safe fallback to other methods when it cannot be used.
		142
		143	Note that kqueue is broken on most operating systems, so it defaults to
		144	'n' on everything but netbsd. Here is what we know:
		145
		146	NetBSD: partially working in at least 3.1. Yeah! :)
		147	FreeBSD: broken on at least 6.2-STABLE,
		148	sockets likely work, ptys definitely don't.
		149	OpenBSD: reports indicate that it likely doesn't work
		150	(similar problems as on FreeBSD).
		151	OS X: completely, utterly broken on at least < 10.5.
		152
		153	EOF
		154
		155	my $can_kqueue = -e "/usr/include/sys/event.h";
		156
		157	$DEFINE .= " -DEV_USE_KQUEUE=" . (0 + (prompt ("Enable kqueue backend (y/n)?", $can_kqueue ? "y" : "n") =~ /[yY]/));
		158
		159	print <<EOF;
		160
		161	* * * * * * * * * * * * * * * * * *
		162
		163
		164	Similarly to the kqueue backend above, EV can take advantage of the
		165	solaris 10 event port interface. Support for event ports will be detected
		166	at runtime, with a safe fallback to other methods when it cannot be used.
		167
		168	EOF
		169
		170	$DEFINE .= " -DEV_USE_PORT=" . (0 + (prompt ("Enable event port backend (y/n)?", (-e "/usr/include/sys/port.h") ? "y" : "n") =~ /[yY]/));
		171
		172	print <<EOF;
		173
		174	* * * * * * * * * * * * * * * * * *
		175
		176
		177	EV needs the functions pthread_atfork and clock_gettime. On most systems
		178	you need some special libraries for this (such as -lrt and -lpthread). You
		179	can specify additional libraries to provide these calls (and any other
		180	required by EV) now, or accept the default.
		181
		182	EOF
		183
		184	$SOLARIS_LIBS = $^O =~ /solaris/ ? " -lsocket -lnsl" : "";
		185
		186	$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", "-lpthread -lrt$SOLARIS_LIBS";
		187
		188
		189	print <<EOF;
		190
		191	* * * * * * * * * * * * * * * * * *
		192
		193
		194	A backend of a different kind is the Linux inotify(7) interface, which can
		195	be used to speed up (and reduce resource consumption) of stat watchers. If
		196	you have it, it is usually a good idea to enable it.
		197
		198	EOF
		199
		200	my $can_inotify = -e "/usr/include/sys/inotify.h";
		201
		202	$DEFINE .= " -DEV_USE_INOTIFY=" . (0 + (prompt ("Enable inotify support (y/n)?", $can_inotify ? "y" : "n") =~ /[yY]/));
		203
		204	print <<EOF;
		205
		206	* * * * * * * * * * * * * * * * * *
		207
		208
		209	EOF
		210
		211	my @anyevent = eval { require AnyEvent; $AnyEvent::VERSION < 2.6 } ? (AnyEvent => 2.6) : ();
16		212
17	WriteMakefile(	213	WriteMakefile(
18	dist => {	214	dist => {
19	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',	215	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',
20	COMPRESS => 'gzip -9v',	216	COMPRESS => 'gzip -9v',
21	SUFFIX => '.gz',	217	SUFFIX => '.gz',
22	},	218	},
23	LIBS => ["-levent"],	219	depend => {
		220	"EV.c" => "EV/EVAPI.h "
		221	. "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c "
		222	. "libev/event.h libev/event.c libev/ev_vars.h libev/ev_wrap.h",
		223	},
		224	INC => "-Ilibev",
		225	DEFINE => "$DEFINE",
24	NAME => "EV",	226	NAME => "EV",
		227	LIBS => [$LIBS],
		228	PREREQ_PM => {
		229	@anyevent,
		230	},
25	VERSION_FROM => "EV.pm",	231	VERSION_FROM => "EV.pm",
26	PM => {	232	PM => {
27	'EV.pm' => '$(INST_LIBDIR)/EV.pm',	233	'EV.pm' => '$(INST_LIBDIR)/EV.pm',
28	'EV/AnyEvent.pm' => '$(INST_LIBDIR)/EV/AnyEvent.pm',
29	'EV/DNS.pm' => '$(INST_LIBDIR)/EV/DNS.pm',
30	'EV/EVAPI.h' => '$(INST_LIBDIR)/EV/EVAPI.h',	234	'EV/EVAPI.h' => '$(INST_LIBDIR)/EV/EVAPI.h',
31	'EV/MakeMaker.pm' => '$(INST_LIBDIR)/EV/MakeMaker.pm',	235	'EV/MakeMaker.pm' => '$(INST_LIBDIR)/EV/MakeMaker.pm',
		236	'libev/ev.h' => '$(INST_LIBDIR)/EV/ev.h',
32	},	237	},
33	);	238	);
34		239
		240

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing EV/Makefile.PL (file contents): Revision 1.5 by root, Mon Oct 29 08:48:07 2007 UTC vs. Revision 1.29 by root, Sat Dec 22 05:47:52 2007 UTC

Diff Legend

Comparing EV/Makefile.PL (file contents):
Revision 1.5 by root, Mon Oct 29 08:48:07 2007 UTC vs.
Revision 1.29 by root, Sat Dec 22 05:47:52 2007 UTC