[ViewVC] Diff of: cvs/EV/Makefile.PL

Comparing EV/Makefile.PL (file contents):
Revision 1.5 by root, Mon Oct 29 08:48:07 2007 UTC vs.
Revision 1.43 by root, Sun Aug 9 13:30:41 2009 UTC

1	use 5.006;	1	use 5.008002;
2		2
		3	use strict qw(vars subs);
		4	use Config;
3	use ExtUtils::MakeMaker;	5	use ExtUtils::MakeMaker;
4		6
		7	unless (-e "libev/ev_epoll.c") {
5	print <<EOF;	8	print <<EOF;
6		9
7	***	10	***
8	*** You need to install libevent (http://monkey.org/~provos/libevent/) separately	11	*** ERROR: libev is missing or damaged. If you used a CVS check-out of EV,
9	*** first in a way so that the Makefile.PL can find both -levent and the event.h	12	*** you also have to check-out the "libev" module from the same CVS
10	*** and evdns.h include files.	13	*** repository into the EV dir (i.e. EV/libev from outside).
11	***	14	***
12	*** Version 1.3e or higher is recommended, but older 1.3 versions likely work too.
13	***
14		15
15	EOF	16	EOF
		17	exit 1;
		18	}
		19
		20	print <<EOF;
		21
		22	* * * * * * * * * * * * * * * * * *
		23
		24
		25	Welcome to EV configuration. If you are in a hurry, just press return here
		26	and hope for the best. The defaults should usually do.
		27
		28	EOF
		29
		30	if (prompt ("Skip further questions and use defaults (y/n)?", "y") =~ /[yY]/) {
		31	$ENV{PERL_MM_USE_DEFAULT} = 1;
		32	}
		33
		34	print <<EOF;
		35
		36	* * * * * * * * * * * * * * * * * *
		37
		38
		39	POSIX optionally offers support for a monotonic clock source. EV
		40	can take advantage of this clock source to detect time jumps
		41	reliably. Unfortunately, some systems are bound to be broken, so you can
		42	disable this here: you can completely disable the detection and use of
		43	the monotonic clock by answering 'n' here. Support for this clock type
		44	will otherwise be autodetected at both compile- and runtime. (this setting
		45	currently affects the use of nanosleep over select as well).
		46
		47	EOF
		48
		49	my $DEFINE .= " -DEV_USE_MONOTONIC=" . (0 + (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/));
		50
		51	print <<EOF;
		52
		53	* * * * * * * * * * * * * * * * * *
		54
		55
		56	POSIX optionally offers support for a (potentially) high-resolution
		57	realtime clock interface. In a good implementation, using it is faster
		58	than the normal method of using gettimeofday. Unfortunately, this option
		59	is also bound to be broken on some systems, and current EV versions do not
		60	actually call C<gettimeofday> very often, so ti defaults to no.
		61
		62	EOF
		63
		64	$DEFINE .= " -DEV_USE_REALTIME=" . (0 + (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "n") =~ /[yY]/));
		65
		66	print <<EOF;
		67
		68	* * * * * * * * * * * * * * * * * *
		69
		70
		71	EV can use various backends with various portability issue. The select
		72	backend is the most portable and makes for a good fallback, but it can be
		73	limited to a low number of file descriptors and/or might not compile. If
		74	you have problems with compiling ev_select.c, you might try to play around
		75	with disabling it here, or forcing it to use the fd_set provided by your
		76	OS, via the next question. I highly recommend keeping it in.
		77
		78	EOF
		79
		80	if (prompt ("Enable select backend (y/n)?", "y") =~ /[yY]/) {
		81	$DEFINE .= " -DEV_USE_SELECT=1";
		82
		83	print <<EOF;
		84
		85	* * * * * * * * * * * * * * * * * *
		86
		87
		88	The select backend can operate in two modes. One uses the system-provided
		89	fd_set and is usually limited to 1024 file descriptors (64 on windows),
		90	the other requires your header files to define NFDBITS and declare a
		91	suitable fd_mask type. If you run into problems compiling ev_select.c, you
		92	can try forcing the use of the system fd_set here.
		93
		94	EOF
		95
		96	if (prompt ("Force use of system fd_set for select backend (y/n)?", "n") =~ /[yY]/) {
		97	$DEFINE .= " -DEV_SELECT_USE_FD_SET";
		98	}
		99	} else {
		100	$DEFINE .= " -DEV_USE_SELECT=0";
		101	}
		102
		103	print <<EOF;
		104
		105	* * * * * * * * * * * * * * * * * *
		106
		107
		108	The second very portable backend is poll(2). It does not exist on windows
		109	and various versions of Mac OS X (and on the other versions it simply
		110	doesn't work), but works basically everywhere else. It is recommended to use
		111	the default here unless you run into compile problems in ev_poll.c.
		112
		113	EOF
		114
		115	$DEFINE .= " -DEV_USE_POLL=" . (0 + (prompt ("Enable poll backend (y/n)?", (-e "/usr/include/poll.h") ? "y" : "n") =~ /[yY]/));
		116
		117	print <<EOF;
		118
		119	* * * * * * * * * * * * * * * * * *
		120
		121
		122	Select and poll make it hard to write efficient servers, especially if the
		123	number of active connections is much lower than the watched ones. GNU/Linux
		124	systems have a more scalable method called "epoll", which EV can use. For
		125	this to work, both your kernel and glibc have to support epoll, but if you
		126	can compile it, the detection will be done at runtime, and EV will safely
		127	fall back to using select when epoll isn't available. If unsure, accept
		128	the default.
		129
		130	EOF
		131
		132	my $can_epoll = -e "/usr/include/sys/epoll.h";
		133	$can_epoll = $ENV{EV_EPOLL} if exists $ENV{EV_EPOLL};
		134	$DEFINE .= " -DEV_USE_EPOLL=" . (0 + (prompt ("Enable epoll backend (y/n)?", $can_epoll ? "y" : "n") =~ /[yY]/));
		135
		136	print <<EOF;
		137
		138	* * * * * * * * * * * * * * * * * *
		139
		140
		141	Similarly to the epoll backend above, EV can take advantage of kqueue on
		142	many BSD systems. Support for kqueue will be detected at runtime, with a
		143	safe fallback to other methods when it cannot be used.
		144
		145	Note that kqueue is broken on most operating systems, so by default it
		146	won't be used on many platforms, but you can still create your own event
		147	loop with kqueue backend if you ask specifically for it.
		148
		149	Here is what we know:
		150
		151	NetBSD: partially working in at least 3.1. Yeah! :)
		152	FreeBSD: broken on at least 6.2-STABLE,
		153	sockets likely work, ptys definitely don't.
		154	OpenBSD: reports indicate that it likely doesn't work
		155	(similar problems as on FreeBSD).
		156	OS X: completely, utterly broken on at least < 10.5.
		157
		158	EOF
		159
		160	my $can_kqueue = -e "/usr/include/sys/event.h";
		161	$can_kqueue = $ENV{EV_KQUEUE} if exists $ENV{EV_KQUEUE};
		162	$DEFINE .= " -DEV_USE_KQUEUE=" . (0 + (prompt ("Enable kqueue backend (y/n)?", $can_kqueue ? "y" : "n") =~ /[yY]/));
		163
		164	print <<EOF;
		165
		166	* * * * * * * * * * * * * * * * * *
		167
		168
		169	Similarly to the kqueue backend above, EV can take advantage of the
		170	solaris 10 event port interface. Support for event ports will be detected
		171	at runtime, with a safe fallback to other methods when it cannot be used.
		172
		173	EOF
		174
		175	$DEFINE .= " -DEV_USE_PORT=" . (0 + (prompt ("Enable event port backend (y/n)?", (-e "/usr/include/sys/port.h") ? "y" : "n") =~ /[yY]/));
		176
		177	print <<EOF;
		178
		179	* * * * * * * * * * * * * * * * * *
		180
		181
		182	EV needs the functions pthread_atfork and clock_gettime. On most systems
		183	you need some special libraries for this (such as -lrt and -lpthread). You
		184	can specify additional libraries to provide these calls (and any other
		185	required by EV) now, or accept the default.
		186
		187	EOF
		188
		189	my $solaris_libs = $^O =~ /solaris/i ? "-lsocket -lnsl" : "";
		190	my $librt = $^O =~ /linux/i ? "-lpthread" : "-lpthread -lrt";
		191	my $LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", "$librt $solaris_libs";
		192
		193
		194	print <<EOF;
		195
		196	* * * * * * * * * * * * * * * * * *
		197
		198
		199	A backend of a different kind is the Linux inotify(7) interface, which can
		200	be used to speed up (and reduce resource consumption) of stat watchers. If
		201	you have the include file and libc support for it, it is usually a good
		202	idea to enable it, as kernel availability is detected at runtime.
		203
		204	EOF
		205
		206	my $can_inotify = -e "/usr/include/sys/inotify.h";
		207	$can_inotify = $ENV{EV_INOTIFY} if exists $ENV{EV_INOTIFY};
		208	$DEFINE .= " -DEV_USE_INOTIFY=" . (0 + (prompt ("Enable inotify support (y/n)?", $can_inotify ? "y" : "n") =~ /[yY]/));
		209
		210	print <<EOF;
		211
		212	* * * * * * * * * * * * * * * * * *
		213
		214
		215	Another useful bit of functionality is the Linux eventfd, which is useful
		216	for faster signal handling (don't care) and intra-thread communications
		217	(more relevant). Kernel support for this will be probed at runtime, but
		218	your libc must contain the necessary wrapper. Glibc 2.7 and later should
		219	have this wrapper.
		220
		221	EOF
		222
		223	my $can_eventfd = -e "/usr/include/sys/eventfd.h";
		224	$can_eventfd = $ENV{EV_EVENTFD} if exists $ENV{EV_EVENTFD};
		225	$DEFINE .= " -DEV_USE_EVENTFD=" . (0 + (prompt ("Enable linux eventfd support (y/n)?", $can_eventfd ? "y" : "n") =~ /[yY]/));
		226
		227	print <<EOF;
		228
		229	* * * * * * * * * * * * * * * * * *
		230
		231
		232	Another sometimes useful bit of functionality is the Linux signalfd, which
		233	is useful for faster signal handling (don't care). Kernel support for
		234	this will be probed at runtime, but your libc must contain the necessary
		235	wrapper and include files. Glibc 2.9 and later should have this wrapper.
		236
		237	EOF
		238
		239	my $can_signalfd = -e "/usr/include/sys/signalfd.h";
		240	$can_signalfd = $ENV{EV_SIGNALFD} if exists $ENV{EV_SIGNALFD};
		241	$DEFINE .= " -DEV_USE_SIGNALFD=" . (0 + (prompt ("Enable linux signalfd support (y/n)?", $can_signalfd ? "y" : "n") =~ /[yY]/));
		242
		243	print <<EOF;
		244
		245	* * * * * * * * * * * * * * * * * *
		246
		247
		248	EOF
		249
		250	my @anyevent = eval { require AnyEvent; $AnyEvent::VERSION < 2.6 } ? (AnyEvent => 2.6) : ();
16		251
17	WriteMakefile(	252	WriteMakefile(
18	dist => {	253	dist => {
19	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',	254	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',
20	COMPRESS => 'gzip -9v',	255	COMPRESS => 'gzip -9v',
21	SUFFIX => '.gz',	256	SUFFIX => '.gz',
22	},	257	},
23	LIBS => ["-levent"],	258	depend => {
		259	"EV.c" => "EV/EVAPI.h "
		260	. "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c "
		261	. "libev/ev_vars.h libev/ev_wrap.h",
		262	},
		263	INC => "-Ilibev",
		264	DEFINE => "$DEFINE",
24	NAME => "EV",	265	NAME => "EV",
		266	LIBS => [$LIBS],
		267	PREREQ_PM => {
		268	@anyevent,
		269	"common::sense" => 0,
		270	},
25	VERSION_FROM => "EV.pm",	271	VERSION_FROM => "EV.pm",
26	PM => {	272	PM => {
27	'EV.pm' => '$(INST_LIBDIR)/EV.pm',	273	'EV.pm' => '$(INST_LIBDIR)/EV.pm',
28	'EV/AnyEvent.pm' => '$(INST_LIBDIR)/EV/AnyEvent.pm',
29	'EV/DNS.pm' => '$(INST_LIBDIR)/EV/DNS.pm',
30	'EV/EVAPI.h' => '$(INST_LIBDIR)/EV/EVAPI.h',	274	'EV/EVAPI.h' => '$(INST_LIBDIR)/EV/EVAPI.h',
31	'EV/MakeMaker.pm' => '$(INST_LIBDIR)/EV/MakeMaker.pm',	275	'EV/MakeMaker.pm' => '$(INST_LIBDIR)/EV/MakeMaker.pm',
		276	'libev/ev.h' => '$(INST_LIBDIR)/EV/ev.h',
		277	'libev/ev.pod' => '$(INST_LIBDIR)/EV/libev.pod',
32	},	278	},
		279	MAN3PODS => {
		280	'EV.pm' => '$(INST_MAN3DIR)/EV.$(MAN3EXT)',
		281	'EV/MakeMaker.pm' => '$(INST_MAN3DIR)/EV::MakeMaker.$(MAN3EXT)',
		282	'libev/ev.pod' => '$(INST_MAN3DIR)/EV::libev.$(MAN3EXT)',
		283	},
33	);	284	);
34		285
		286

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing EV/Makefile.PL (file contents): Revision 1.5 by root, Mon Oct 29 08:48:07 2007 UTC vs. Revision 1.43 by root, Sun Aug 9 13:30:41 2009 UTC

Diff Legend

Comparing EV/Makefile.PL (file contents):
Revision 1.5 by root, Mon Oct 29 08:48:07 2007 UTC vs.
Revision 1.43 by root, Sun Aug 9 13:30:41 2009 UTC