[ViewVC] Diff of: cvs/EV/Makefile.PL

Comparing EV/Makefile.PL (file contents):
Revision 1.5 by root, Mon Oct 29 08:48:07 2007 UTC vs.
Revision 1.64 by root, Tue Nov 19 13:08:54 2019 UTC

1	use 5.006;	1	use strict qw(vars subs);
2		2	use Canary::Stability EV => 1, 5.008002;
		3	use Config;
3	use ExtUtils::MakeMaker;	4	use ExtUtils::MakeMaker;
4		5
		6	sub have_inc($) {
		7	scalar grep -r "$_/$_[0]", $Config{usrinc}, split / /, $Config{incpth}
		8	}
		9
		10	my $DEFINE;
		11
		12	unless (-e "libev/ev_iouring.c") {
5	print <<EOF;	13	print <<EOF;
6		14
7	***	15	***
8	*** You need to install libevent (http://monkey.org/~provos/libevent/) separately	16	*** ERROR: libev is missing or damaged. If you used a CVS check-out of EV,
9	*** first in a way so that the Makefile.PL can find both -levent and the event.h	17	*** you also have to check-out the "libev" module from the same CVS
10	*** and evdns.h include files.	18	*** repository into the EV dir (i.e. EV/libev from outside).
11	***	19	***
12	*** Version 1.3e or higher is recommended, but older 1.3 versions likely work too.
13	***
14		20
15	EOF	21	EOF
		22	exit 1;
		23	}
		24
		25	print <<EOF;
		26
		27	* * * * * * * * * * * * * * * * * *
		28
		29
		30	Welcome to EV configuration. If you are in a hurry, just press return here
		31	and hope for the best. The defaults should usually do.
		32
		33	EOF
		34
		35	if (prompt ("Skip further questions and use defaults (y/n)?", "y") =~ /[yY]/) {
		36	$ENV{PERL_MM_USE_DEFAULT} = 1;
		37	}
		38
		39	print <<EOF;
		40
		41	* * * * * * * * * * * * * * * * * *
		42
		43
		44	POSIX optionally offers support for a monotonic clock source. EV
		45	can take advantage of this clock source to detect time jumps more
		46	reliably. Unfortunately, some systems are bound to be broken, so you can
		47	disable this here: you can completely disable the detection and use of
		48	the monotonic clock by answering 'n' here. Support for this clock type
		49	will otherwise be autodetected at both compile- and runtime. (this setting
		50	currently affects the use of nanosleep over select as well).
		51
		52	EOF
		53
		54	unless (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/) {
		55	$DEFINE .= " -DEV_USE_MONOTONIC=0";
		56	}
		57
		58	print <<EOF;
		59
		60	* * * * * * * * * * * * * * * * * *
		61
		62
		63	POSIX optionally offers support for a (potentially) high-resolution
		64	realtime clock interface. In a good implementation, using it is faster
		65	than the normal method of using gettimeofday. Unfortunately, this option
		66	is also bound to be broken on some systems, and current EV versions do not
		67	actually call gettimeofday very often, so it defaults to no.
		68
		69	EOF
		70
		71	$DEFINE .= " -DEV_USE_REALTIME=" . (0 + (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "n") =~ /[yY]/));
		72
		73	print <<EOF;
		74
		75	* * * * * * * * * * * * * * * * * *
		76
		77
		78	EV can use various backends with various portability issues. The select
		79	backend is the most portable and makes for a good fallback, but it can be
		80	limited to a low number of file descriptors and/or might not compile. If
		81	you have problems with compiling ev_select.c, you might try to play around
		82	with disabling it here, or forcing it to use the fd_set provided by your
		83	OS, via the next question. I highly recommend keeping it in.
		84
		85	EOF
		86
		87	if (prompt ("Enable select backend (y/n)?", "y") =~ /[yY]/) {
		88	$DEFINE .= " -DEV_USE_SELECT=1";
		89
		90	print <<EOF;
		91
		92	* * * * * * * * * * * * * * * * * *
		93
		94
		95	The select backend can operate in two modes. One uses the system-provided
		96	fd_set and is usually limited to 1024 file descriptors (64 on windows),
		97	the other requires your header files to define NFDBITS and declare a
		98	suitable fd_mask type. If you run into problems compiling ev_select.c, you
		99	can try forcing the use of the system fd_set here.
		100
		101	EOF
		102
		103	if (prompt ("Force use of system fd_set for select backend (y/n)?", "n") =~ /[yY]/) {
		104	$DEFINE .= " -DEV_SELECT_USE_FD_SET";
		105	}
		106	} else {
		107	$DEFINE .= " -DEV_USE_SELECT=0";
		108	}
		109
		110	print <<EOF;
		111
		112	* * * * * * * * * * * * * * * * * *
		113
		114
		115	The second very portable backend is poll(2). It does not exist on windows
		116	and various versions of Mac OS X (and on the other versions it simply
		117	doesn't work), but works basically everywhere else. It is recommended to use
		118	the default here unless you run into compile problems in ev_poll.c.
		119
		120	EOF
		121
		122	$DEFINE .= " -DEV_USE_POLL=" . (0 + (prompt ("Enable poll backend (y/n)?", (have_inc "poll.h") ? "y" : "n") =~ /[yY]/));
		123
		124	print <<EOF;
		125
		126	* * * * * * * * * * * * * * * * * *
		127
		128
		129	Select and poll make it hard to write efficient servers, especially if the
		130	number of active connections is much lower than the watched ones. GNU/Linux
		131	systems have a more scalable method called "epoll", which EV can use. For
		132	this to work, both your kernel and glibc have to support epoll, but if you
		133	can compile it, the detection will be done at runtime, and EV will safely
		134	fall back to using select when epoll isn't available. If unsure, accept
		135	the default.
		136
		137	EOF
		138
		139	my $can_epoll = have_inc "sys/epoll.h";
		140	$can_epoll = $ENV{EV_EPOLL} if exists $ENV{EV_EPOLL};
		141	$DEFINE .= " -DEV_USE_EPOLL=" . (0 + (prompt ("Enable epoll backend (y/n)?", $can_epoll ? "y" : "n") =~ /[yY]/));
		142
		143	print <<EOF;
		144
		145	* * * * * * * * * * * * * * * * * *
		146
		147
		148	Linux 4.18 introduced another event polling interface, this time using
		149	the Linux AIO API. While this API is far superior to epoll and almost
		150	rivals kqueue, it also suffers from the same issues as kqueue typically
		151	does: only a subset of file types are supported (as of 4.19, I have seen
		152	eventfd, pipes, sockets files and some devices, but no ttys). It also
		153	is subject arbitrary system-wide limits imposed on it. Therefore, this
		154	backend is not used by default, even when it is compiled in, and you have
		155	to request it explicitly, e.g. with LIBEV_FLAGS=64. If unsure, accept the
		156	default.
		157
		158	EOF
		159
		160	my $can_linuxaio = have_inc "linux/aio_abi.h";
		161	$can_linuxaio = $ENV{EV_LINUXAIO} if exists $ENV{EV_LINUXAIO};
		162	$can_linuxaio = 0 + (prompt ("Enable linux aio backend (y/n)?", $can_linuxaio ? "y" : "n") =~ /[yY]/);
		163	$DEFINE .= " -DEV_USE_LINUXAIO=$can_linuxaio";
		164
		165	if ($can_linuxaio) {
		166	print <<EOF;
		167
		168	* * * * * * * * * * * * * * * * * *
		169
		170
		171	The previously mentioned Linux AIO backend is experimental and will not
		172	be used unless requested explicitly. You can, howeer, choose to make ti a
		173	recommended basckend, which means it will be chosen if available even when
		174	not explicitly asked for, in preference to epoll on GNU/Linux. This option
		175	is likely temporary. When unsure, accept the default.
		176
		177	EOF
		178
		179	my $recommend_linuxaio = 0;
		180	$recommend_linuxaio = $ENV{EV_RECOMMEND_LINUXAIO} if exists $ENV{EV_RECOMMEND_LINUXAIO};
		181	$recommend_linuxaio = 0 + (prompt ("Treat linux aio as a recommended backend (y/n)?", $recommend_linuxaio ? "y" : "n") =~ /[yY]/);
		182	$DEFINE .= " -DEV_RECOMMEND_LINUXAIO=$recommend_linuxaio";
		183	}
		184
		185	print <<EOF;
		186
		187	* * * * * * * * * * * * * * * * * *
		188
		189
		190	Linux 4.19 introduced another event polling interface, "io_uring". While
		191	this API is far superior to epoll and almost rivals linuxaio, it also
		192	suffers from the same issues as kqueue typically does: only a subset of
		193	file types are supported (as of 5.2). It is also very buggy still, and
		194	most importantly, very very slow for most workloads. Therefore, this
		195	backend is not used by default, even when it is compiled in, and you have
		196	to request it explicitly, e.g. with LIBEV_FLAGS=128. If unsure, accept the
		197	default.
		198
		199	EOF
		200
		201	my $can_iouring = have_inc "linux/fs.h";
		202	$can_iouring = $ENV{EV_IOURING} if exists $ENV{EV_IOURING};
		203	$can_iouring = 0 + (prompt ("Enable linux io_uring backend (y/n)?", $can_iouring ? "y" : "n") =~ /[yY]/);
		204	$DEFINE .= " -DEV_USE_IOURING=$can_iouring";
		205
		206	if ($can_iouring) {
		207	print <<EOF;
		208
		209	* * * * * * * * * * * * * * * * * *
		210
		211
		212	The previously mentioned Linux io_uring is experimental and will not be
		213	used unless requested explicitly. You can, howeer, choose to make ti a
		214	recommended basckend, which means it will be chosen if available even when
		215	not explicitly asked for, in preference to epoll on GNU/Linux. This option
		216	is likely temporary. When unsure, accept the default.
		217
		218	EOF
		219
		220	my $recommend_iouring = 0;
		221	$recommend_iouring = $ENV{EV_RECOMMEND_IOURING} if exists $ENV{EV_RECOMMEND_IOURING};
		222	$recommend_iouring = 0 + (prompt ("Treat io_uring as a recommended backend (y/n)?", $recommend_iouring ? "y" : "n") =~ /[yY]/);
		223	$DEFINE .= " -DEV_RECOMMEND_IOURING=$recommend_iouring";
		224	}
		225
		226	print <<EOF;
		227
		228	* * * * * * * * * * * * * * * * * *
		229
		230
		231	EV can take advantage of kqueue on many BSD systems. Support for kqueue
		232	will be detected at runtime, with a safe fallback to other methods when it
		233	cannot be used.
		234
		235	Note that kqueue is subtly broken on most operating systems, so by default
		236	it won't be used on many platforms, but you can still create your own
		237	event loop with kqueue backend if you ask specifically for it.
		238
		239	Here is what we know:
		240
		241	NetBSD: partially working in at least 3.1 and later. Yeah! :)
		242	FreeBSD: broken on at least 6.2-STABLE, spotty in later versions,
		243	sockets likely work, ptys definitely don't.
		244	OpenBSD: reports indicate that it likely doesn't work
		245	(similar problems as on FreeBSD).
		246	OS X: completely, utterly broken on at least <= 10.6.
		247
		248	EOF
		249
		250	# minix has all the header files, but no implementation. won-der-ful.
		251	my $can_kqueue = have_inc "sys/event.h" && $^O ne "minix";
		252	$can_kqueue = $ENV{EV_KQUEUE} if exists $ENV{EV_KQUEUE};
		253	$DEFINE .= " -DEV_USE_KQUEUE=" . (0 + (prompt ("Enable kqueue backend (y/n)?", $can_kqueue ? "y" : "n") =~ /[yY]/));
		254
		255	print <<EOF;
		256
		257	* * * * * * * * * * * * * * * * * *
		258
		259
		260	Similarly to the kqueue backend above, EV can take advantage of the
		261	solaris 10 event port interface. Support for event ports will be detected
		262	at runtime, with a safe fallback to other methods when it cannot be used.
		263
		264	EOF
		265
		266	$DEFINE .= " -DEV_USE_PORT=" . (0 + (prompt ("Enable event port backend (y/n)?", (have_inc "sys/port.h") ? "y" : "n") =~ /[yY]/));
		267
		268	print <<EOF;
		269
		270	* * * * * * * * * * * * * * * * * *
		271
		272
		273	EV needs the functions pthread_atfork and clock_gettime. On most systems
		274	you need some special libraries for this (such as -lrt and -lpthread). You
		275	can specify additional libraries to provide these calls (and any other
		276	required by EV) now, or accept the default.
		277
		278	On GNU/Linux systems, EV uses the LSB 3.1 __register_atfork function
		279	to avoid the dependency on libpthread, and directly uses the clock_gettime
		280	syscall to avoid a dependency on librt.
		281
		282	EOF
		283
		284	my $solaris_libs = $^O =~ /solaris/i ? "-lsocket -lnsl" : "";
		285	my $librt = $^O =~ /linux/i ? "" : "-lpthread -lrt";
		286	my $LIBS = exists $ENV{EV_LIBS} ? $ENV{EV_LIBS} : "$librt $solaris_libs";
		287	$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", $LIBS;
		288
		289
		290	print <<EOF;
		291
		292	* * * * * * * * * * * * * * * * * *
		293
		294
		295	A backend of a different kind is the Linux inotify(7) interface, which can
		296	be used to speed up (and reduce resource consumption) of stat watchers. If
		297	you have the include file and libc support for it, it is usually a good
		298	idea to enable it, as kernel availability is detected at runtime.
		299
		300	EOF
		301
		302	my $can_inotify = have_inc "sys/inotify.h";
		303	$can_inotify = $ENV{EV_INOTIFY} if exists $ENV{EV_INOTIFY};
		304	$DEFINE .= " -DEV_USE_INOTIFY=" . (0 + (prompt ("Enable inotify support (y/n)?", $can_inotify ? "y" : "n") =~ /[yY]/));
		305
		306	print <<EOF;
		307
		308	* * * * * * * * * * * * * * * * * *
		309
		310
		311	Another useful bit of functionality is the Linux eventfd, which is useful
		312	for faster signal handling (don't care) and intra-thread communications
		313	(more relevant). Kernel support for this will be probed at runtime, but
		314	your libc must contain the necessary wrapper. Glibc 2.7 and later should
		315	have this wrapper.
		316
		317	EOF
		318
		319	my $can_eventfd = have_inc "sys/eventfd.h";
		320	$can_eventfd = $ENV{EV_EVENTFD} if exists $ENV{EV_EVENTFD};
		321	$DEFINE .= " -DEV_USE_EVENTFD=" . (0 + (prompt ("Enable linux eventfd support (y/n)?", $can_eventfd ? "y" : "n") =~ /[yY]/));
		322
		323	print <<EOF;
		324
		325	* * * * * * * * * * * * * * * * * *
		326
		327
		328	Another sometimes useful bit of functionality is the Linux signalfd, which
		329	is useful for faster signal handling (don't care). Kernel support for
		330	this will be probed at runtime, but your libc must contain the necessary
		331	wrapper. Glibc 2.7 and later should have this wrapper.
		332
		333	EOF
		334
		335	my $can_signalfd = have_inc "sys/signalfd.h";
		336	$can_signalfd = $ENV{EV_SIGNALFD} if exists $ENV{EV_SIGNALFD};
		337	$DEFINE .= " -DEV_USE_SIGNALFD=" . (0 + (prompt ("Enable linux signalfd support (y/n)?", $can_signalfd ? "y" : "n") =~ /[yY]/));
		338
		339	print <<EOF;
		340
		341	* * * * * * * * * * * * * * * * * *
		342
		343
		344	Libev contains numerous internal assert() invocations to check for
		345	consistency and user errors. These are normally enabled, but most
		346	perl builds disable this error reporting mechanism by default. You
		347	can re-enable these asserts here. Enabling them might help you catch
		348	programming bugs earlier, but might cause a small slowdown. Also, failures
		349	will be reported by aboritng your program, instead of throwing a perl
		350	exception.
		351
		352	If unsure, enable this if you only use this perl installation for
		353	development, and leave it off for use in production environments.
		354
		355	EOF
		356
		357	my $enable_assertions = 0;
		358	$enable_assertions = 0 + (prompt ("Make sure assertions are enabled? (y/n)?", $enable_assertions ? "y" : "n") =~ /[yY]/);
		359	$DEFINE .= " -DEV_ENABLE_ASERTIONS=1" if $enable_assertions;
		360
		361	print <<EOF;
		362
		363	* * * * * * * * * * * * * * * * * *
		364
		365
		366	Very rarely, people want to tweak EV even more, e.g. to exclude
		367	or include certain watcher types or backends. This can be done by adding
		368	extra -D options here, or via the EV_EXTRA_DEFS environment variable.
		369
		370	For example, if you run into compile problems because of missing memory
		371	fences (or you just want extra performance), you can tell EV to not support
		372	smp and threads via -DEV_NO_THREADS.
		373
		374	Normal persons just press enter.
		375
		376	EOF
		377
		378	$DEFINE .= " " . prompt "Any extra -D options?", "$ENV{EV_EXTRA_DEFS}";
		379
		380	print <<EOF;
		381
		382	* * * * * * * * * * * * * * * * * *
		383
		384
		385	EOF
		386
		387	my @anyevent = eval { require AnyEvent; $AnyEvent::VERSION < 5.29 } ? (AnyEvent => 5.29) : ();
16		388
17	WriteMakefile(	389	WriteMakefile(
18	dist => {	390	dist => {
19	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',	391	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',
20	COMPRESS => 'gzip -9v',	392	COMPRESS => 'gzip -9v',
21	SUFFIX => '.gz',	393	SUFFIX => '.gz',
22	},	394	},
23	LIBS => ["-levent"],	395	depend => {
		396	"EV.c" => "EV/EVAPI.h "
		397	. "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c libev/ev_linuxaio.c "
		398	. "libev/ev_vars.h libev/ev_wrap.h",
		399	},
		400	INC => "-Ilibev",
		401	DEFINE => "$DEFINE",
24	NAME => "EV",	402	NAME => "EV",
		403	LIBS => [$LIBS],
		404	PREREQ_PM => {
		405	@anyevent,
		406	"common::sense" => 0,
		407	},
		408	CONFIGURE_REQUIRES => { "ExtUtils::MakeMaker" => 6.52, "Canary::Stability" => 0 },
25	VERSION_FROM => "EV.pm",	409	VERSION_FROM => "EV.pm",
26	PM => {	410	PM => {
27	'EV.pm' => '$(INST_LIBDIR)/EV.pm',	411	'EV.pm' => '$(INST_LIB)/EV.pm',
28	'EV/AnyEvent.pm' => '$(INST_LIBDIR)/EV/AnyEvent.pm',
29	'EV/DNS.pm' => '$(INST_LIBDIR)/EV/DNS.pm',
30	'EV/EVAPI.h' => '$(INST_LIBDIR)/EV/EVAPI.h',	412	'EV/EVAPI.h' => '$(INST_LIB)/EV/EVAPI.h',
31	'EV/MakeMaker.pm' => '$(INST_LIBDIR)/EV/MakeMaker.pm',	413	'EV/MakeMaker.pm' => '$(INST_LIB)/EV/MakeMaker.pm',
		414	'libev/ev.h' => '$(INST_LIB)/EV/ev.h',
		415	'libev/ev.pod' => '$(INST_LIB)/EV/libev.pod',
32	},	416	},
		417	MAN3PODS => {
		418	'EV.pm' => '$(INST_MAN3DIR)/EV.$(MAN3EXT)',
		419	'EV/MakeMaker.pm' => '$(INST_MAN3DIR)/EV::MakeMaker.$(MAN3EXT)',
		420	'libev/ev.pod' => '$(INST_MAN3DIR)/EV::libev.$(MAN3EXT)',
		421	},
33	);	422	);
34		423

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing EV/Makefile.PL (file contents): Revision 1.5 by root, Mon Oct 29 08:48:07 2007 UTC vs. Revision 1.64 by root, Tue Nov 19 13:08:54 2019 UTC

Diff Legend

Comparing EV/Makefile.PL (file contents):
Revision 1.5 by root, Mon Oct 29 08:48:07 2007 UTC vs.
Revision 1.64 by root, Tue Nov 19 13:08:54 2019 UTC