[ViewVC] Diff of: cvs/EV/Makefile.PL

Comparing EV/Makefile.PL (file contents):
Revision 1.13 by root, Thu Nov 1 17:45:30 2007 UTC vs.
Revision 1.59 by root, Sat Jun 22 16:43:05 2019 UTC

…		…
1	use 5.006;	1	use strict qw(vars subs);
2		2	use Canary::Stability EV => 1, 5.008002;
3	use Config;	3	use Config;
4	use ExtUtils::MakeMaker;	4	use ExtUtils::MakeMaker;
5		5
		6	sub have_inc($) {
		7	scalar grep -r "$_/$_[0]", $Config{usrinc}, split / /, $Config{incpth}
		8	}
		9
		10	my $DEFINE;
6		11
7	unless (-e "libev/ev_epoll.c") {	12	unless (-e "libev/ev_epoll.c") {
8	print <<EOF;	13	print <<EOF;
9		14
10	***	15	***
17	exit 1;	22	exit 1;
18	}	23	}
19		24
20	print <<EOF;	25	print <<EOF;
21		26
22
23	* * * * * * * * * * * * * * * * * *	27	* * * * * * * * * * * * * * * * * *
		28
24		29
25	Welcome to EV configuration. If you are in a hurry, just press return here	30	Welcome to EV configuration. If you are in a hurry, just press return here
26	and hope for the best. The defaults should usually do.	31	and hope for the best. The defaults should usually do.
27		32
28	EOF	33	EOF
…		…
31	$ENV{PERL_MM_USE_DEFAULT} = 1;	36	$ENV{PERL_MM_USE_DEFAULT} = 1;
32	}	37	}
33		38
34	print <<EOF;	39	print <<EOF;
35		40
36
37	* * * * * * * * * * * * * * * * * *	41	* * * * * * * * * * * * * * * * * *
38		42
		43
39	POSIX optionally offers support for a monotonic clock source. EV can	44	POSIX optionally offers support for a monotonic clock source. EV
40	take advantage of this clock source to detect time jumps reliably. This	45	can take advantage of this clock source to detect time jumps more
41	will usually slow down EV a tiny amount, but this is usually
42	well-invested. Unfortunately, some systems are bound to be broken, so	46	reliably. Unfortunately, some systems are bound to be broken, so you can
43	you can disable this here. Whatever your reasons, you can completely	47	disable this here: you can completely disable the detection and use of
44	disable the detection and use of this monotonic clock by answering 'n'	48	the monotonic clock by answering 'n' here. Support for this clock type
45	here. Support for this clock type will otherwise be autodetected at both	49	will otherwise be autodetected at both compile- and runtime. (this setting
46	compile- and runtime.	50	currently affects the use of nanosleep over select as well).
47		51
48	EOF	52	EOF
49		53
50	if (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/) {	54	unless (prompt ("Enable optional support for CLOCK_MONOTONIC (y/n)?", "y") =~ /[yY]/) {
51	$DEFINE .= " -DEV_USE_MONOTONIC";	55	$DEFINE .= " -DEV_USE_MONOTONIC=0";
52	}	56	}
53		57
54	print <<EOF;	58	print <<EOF;
55		59
56
57	* * * * * * * * * * * * * * * * * *	60	* * * * * * * * * * * * * * * * * *
		61
58		62
59	POSIX optionally offers support for a (potentially) high-resolution	63	POSIX optionally offers support for a (potentially) high-resolution
60	realtime clock interface. In a good implementation, using it is faster	64	realtime clock interface. In a good implementation, using it is faster
61	than the normal method of using gettimeofday. Unfortunately, this option	65	than the normal method of using gettimeofday. Unfortunately, this option
62	is also bound to be broken on some systems, so you can disable use and	66	is also bound to be broken on some systems, and current EV versions do not
63	probing of this feature altogether here. Otherwise support for this clock	67	actually call gettimeofday very often, so it defaults to no.
64	type will be autodetected at compiletime.
65		68
66	EOF	69	EOF
67		70
68	if (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "y") !~ /[yY]/) {	71	$DEFINE .= " -DEV_USE_REALTIME=" . (0 + (prompt ("Prefer clock_gettime (CLOCK_REALTIME) over gettimeofday (y/n)?", "n") =~ /[yY]/));
		72
		73	print <<EOF;
		74
		75	* * * * * * * * * * * * * * * * * *
		76
		77
		78	EV can use various backends with various portability issues. The select
		79	backend is the most portable and makes for a good fallback, but it can be
		80	limited to a low number of file descriptors and/or might not compile. If
		81	you have problems with compiling ev_select.c, you might try to play around
		82	with disabling it here, or forcing it to use the fd_set provided by your
		83	OS, via the next question. I highly recommend keeping it in.
		84
		85	EOF
		86
		87	if (prompt ("Enable select backend (y/n)?", "y") =~ /[yY]/) {
69	$DEFINE .= " -DEV_USE_REALTIME=0";	88	$DEFINE .= " -DEV_USE_SELECT=1";
70	}
71		89
72	print <<EOF;	90	print <<EOF;
73		91
74
75	* * * * * * * * * * * * * * * * * *	92	* * * * * * * * * * * * * * * * * *
		93
		94
		95	The select backend can operate in two modes. One uses the system-provided
		96	fd_set and is usually limited to 1024 file descriptors (64 on windows),
		97	the other requires your header files to define NFDBITS and declare a
		98	suitable fd_mask type. If you run into problems compiling ev_select.c, you
		99	can try forcing the use of the system fd_set here.
		100
		101	EOF
		102
		103	if (prompt ("Force use of system fd_set for select backend (y/n)?", "n") =~ /[yY]/) {
		104	$DEFINE .= " -DEV_SELECT_USE_FD_SET";
		105	}
		106	} else {
		107	$DEFINE .= " -DEV_USE_SELECT=0";
		108	}
		109
		110	print <<EOF;
		111
		112	* * * * * * * * * * * * * * * * * *
		113
		114
		115	The second very portable backend is poll(2). It does not exist on windows
		116	and various versions of Mac OS X (and on the other versions it simply
		117	doesn't work), but works basically everywhere else. It is recommended to use
		118	the default here unless you run into compile problems in ev_poll.c.
		119
		120	EOF
		121
		122	$DEFINE .= " -DEV_USE_POLL=" . (0 + (prompt ("Enable poll backend (y/n)?", (have_inc "poll.h") ? "y" : "n") =~ /[yY]/));
		123
		124	print <<EOF;
		125
		126	* * * * * * * * * * * * * * * * * *
		127
		128
		129	Select and poll make it hard to write efficient servers, especially if the
		130	number of active connections is much lower than the watched ones. GNU/Linux
		131	systems have a more scalable method called "epoll", which EV can use. For
		132	this to work, both your kernel and glibc have to support epoll, but if you
		133	can compile it, the detection will be done at runtime, and EV will safely
		134	fall back to using select when epoll isn't available. If unsure, accept
		135	the default.
		136
		137	EOF
		138
		139	my $can_epoll = have_inc "sys/epoll.h";
		140	$can_epoll = $ENV{EV_EPOLL} if exists $ENV{EV_EPOLL};
		141	$DEFINE .= " -DEV_USE_EPOLL=" . (0 + (prompt ("Enable epoll backend (y/n)?", $can_epoll ? "y" : "n") =~ /[yY]/));
		142
		143	print <<EOF;
		144
		145	* * * * * * * * * * * * * * * * * *
		146
		147
		148	Linux 4.18 introduced another event polling interface, this time using
		149	the Linux AIO API. While this API is far superior to epoll and almost
		150	rivals kqueue, it also suffers from the same issues as kqueue typically
		151	does: only a subset of file types are supported (as of 4.19, I have seen
		152	eventfd, pipes, sockets files and some devices, but no ttys). It also
		153	is subject arbitrary system-wide limits imposed on it. Therefore, this
		154	backend is not used by default, even when it is compiled in, and you have
		155	to request it explicitly, e.g. with LIBEV_FLAGS=64. If unsure, accept the
		156	default.
		157
		158	EOF
		159
		160	my $can_linuxaio = have_inc "linux/aio_abi.h";
		161	$can_linuxaio = $ENV{EV_LINUXAIO} if exists $ENV{EV_LINUXAIO};
		162	$DEFINE .= " -DEV_USE_LINUXAIO=" . (0 + (prompt ("Enable linux aio backend (y/n)?", $can_linuxaio ? "y" : "n") =~ /[yY]/));
		163
		164	print <<EOF;
		165
		166	* * * * * * * * * * * * * * * * * *
		167
		168
		169	Similarly to the epoll backend above, EV can take advantage of kqueue on
		170	many BSD systems. Support for kqueue will be detected at runtime, with a
		171	safe fallback to other methods when it cannot be used.
		172
		173	Note that kqueue is broken on most operating systems, so by default it
		174	won't be used on many platforms, but you can still create your own event
		175	loop with kqueue backend if you ask specifically for it.
		176
		177	Here is what we know:
		178
		179	NetBSD: partially working in at least 3.1 and later. Yeah! :)
		180	FreeBSD: broken on at least 6.2-STABLE, spotty in later versions,
		181	sockets likely work, ptys definitely don't.
		182	OpenBSD: reports indicate that it likely doesn't work
		183	(similar problems as on FreeBSD).
		184	OS X: completely, utterly broken on at least <= 10.6.
		185
		186	EOF
		187
		188	my $can_kqueue = have_inc "sys/event.h";
		189	$can_kqueue = $ENV{EV_KQUEUE} if exists $ENV{EV_KQUEUE};
		190	$DEFINE .= " -DEV_USE_KQUEUE=" . (0 + (prompt ("Enable kqueue backend (y/n)?", $can_kqueue ? "y" : "n") =~ /[yY]/));
		191
		192	print <<EOF;
		193
		194	* * * * * * * * * * * * * * * * * *
		195
		196
		197	Similarly to the kqueue backend above, EV can take advantage of the
		198	solaris 10 event port interface. Support for event ports will be detected
		199	at runtime, with a safe fallback to other methods when it cannot be used.
		200
		201	EOF
		202
		203	$DEFINE .= " -DEV_USE_PORT=" . (0 + (prompt ("Enable event port backend (y/n)?", (have_inc "sys/port.h") ? "y" : "n") =~ /[yY]/));
		204
		205	print <<EOF;
		206
		207	* * * * * * * * * * * * * * * * * *
		208
76		209
77	EV needs the functions pthread_atfork and clock_gettime. On most systems	210	EV needs the functions pthread_atfork and clock_gettime. On most systems
78	you need some special libraries for this (such as -lrt and -lpthread). You can	211	you need some special libraries for this (such as -lrt and -lpthread). You
79	specify additional libraries to provide these calls now, or accept the default.	212	can specify additional libraries to provide these calls (and any other
		213	required by EV) now, or accept the default.
80		214
81	EOF	215	On GNU/Linux systems, EV uses the LSB 3.1 __register_atfork function
		216	to avoid the dependency on libpthread, and directly uses the clock_gettime
		217	syscall to avoid a dependency on librt.
82		218
		219	EOF
		220
		221	my $solaris_libs = $^O =~ /solaris/i ? "-lsocket -lnsl" : "";
		222	my $librt = $^O =~ /linux/i ? "" : "-lpthread -lrt";
		223	my $LIBS = exists $ENV{EV_LIBS} ? $ENV{EV_LIBS} : "$librt $solaris_libs";
83	$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", "-lpthread -lrt";	224	$LIBS = prompt "Extra libraries for pthread_atfork and clock_gettime?", $LIBS;
84		225
85		226
86	print <<EOF;	227	print <<EOF;
87		228
88
89	* * * * * * * * * * * * * * * * * *	229	* * * * * * * * * * * * * * * * * *
90		230
91	EV needs the functions pthread_atfork and clock_gettime. On most systems
92	you need some special libraries for this (such as -lrt and -lpthread). You can
93	specify additional libraries to provide these calls now, or accept the default.
94		231
95	EOF	232	A backend of a different kind is the Linux inotify(7) interface, which can
		233	be used to speed up (and reduce resource consumption) of stat watchers. If
		234	you have the include file and libc support for it, it is usually a good
		235	idea to enable it, as kernel availability is detected at runtime.
96		236
97	if (prompt ("Enable epoll backend (y/n)?", (-e "/usr/include/sys/epoll.h") ? "y" : "n") =~ /[yY]/) {
98	$DEFINE .= " -DEV_USE_EPOLL";
99	}
100
101	print <<EOF;
102
103
104	* * * * * * * * * * * * * * * * * *
105
106	EOF	237	EOF
		238
		239	my $can_inotify = have_inc "sys/inotify.h";
		240	$can_inotify = $ENV{EV_INOTIFY} if exists $ENV{EV_INOTIFY};
		241	$DEFINE .= " -DEV_USE_INOTIFY=" . (0 + (prompt ("Enable inotify support (y/n)?", $can_inotify ? "y" : "n") =~ /[yY]/));
		242
		243	print <<EOF;
		244
		245	* * * * * * * * * * * * * * * * * *
		246
		247
		248	Another useful bit of functionality is the Linux eventfd, which is useful
		249	for faster signal handling (don't care) and intra-thread communications
		250	(more relevant). Kernel support for this will be probed at runtime, but
		251	your libc must contain the necessary wrapper. Glibc 2.7 and later should
		252	have this wrapper.
		253
		254	EOF
		255
		256	my $can_eventfd = have_inc "sys/eventfd.h";
		257	$can_eventfd = $ENV{EV_EVENTFD} if exists $ENV{EV_EVENTFD};
		258	$DEFINE .= " -DEV_USE_EVENTFD=" . (0 + (prompt ("Enable linux eventfd support (y/n)?", $can_eventfd ? "y" : "n") =~ /[yY]/));
		259
		260	print <<EOF;
		261
		262	* * * * * * * * * * * * * * * * * *
		263
		264
		265	Another sometimes useful bit of functionality is the Linux signalfd, which
		266	is useful for faster signal handling (don't care). Kernel support for
		267	this will be probed at runtime, but your libc must contain the necessary
		268	wrapper. Glibc 2.7 and later should have this wrapper.
		269
		270	EOF
		271
		272	my $can_signalfd = have_inc "sys/signalfd.h";
		273	$can_signalfd = $ENV{EV_SIGNALFD} if exists $ENV{EV_SIGNALFD};
		274	$DEFINE .= " -DEV_USE_SIGNALFD=" . (0 + (prompt ("Enable linux signalfd support (y/n)?", $can_signalfd ? "y" : "n") =~ /[yY]/));
		275
		276	print <<EOF;
		277
		278	* * * * * * * * * * * * * * * * * *
		279
		280
		281	Very rarely, people want to tweak EV even more, e.g. to exclude
		282	or include certain watcher types or backends. This can be done by adding
		283	extra -D options here, or via the EV_EXTRA_DEFS environment variable.
		284
		285	For example, if you run into compile problems because of missing memory
		286	fences (or you just want extra performance), you can tell EV to not support
		287	smp and threads via -DEV_NO_THREADS.
		288
		289	Normal persons just press enter.
		290
		291	EOF
		292
		293	$DEFINE .= " " . prompt "Any extra -D options?", "$ENV{EV_EXTRA_DEFS}";
		294
		295	print <<EOF;
		296
		297	* * * * * * * * * * * * * * * * * *
		298
		299
		300	EOF
		301
		302	my @anyevent = eval { require AnyEvent; $AnyEvent::VERSION < 5.29 } ? (AnyEvent => 5.29) : ();
107		303
108	WriteMakefile(	304	WriteMakefile(
109	dist => {	305	dist => {
110	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',	306	PREOP => 'pod2text EV.pm \| tee README >$(DISTVNAME)/README; chmod -R u=rwX,go=rX . ;',
111	COMPRESS => 'gzip -9v',	307	COMPRESS => 'gzip -9v',
112	SUFFIX => '.gz',	308	SUFFIX => '.gz',
113	},	309	},
114	depend => {	310	depend => {
115	"EV.c" => "EV/EVAPI.h "	311	"EV.c" => "EV/EVAPI.h "
116	. "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c "	312	. "libev/ev.c libev/ev.h libev/ev_epoll.c libev/ev_select.c libev/ev_kqueue.c libev/ev_poll.c "
117	. "libev/event.h libev/event.c libev/evdns.h libev/evdns.c",	313	. "libev/ev_vars.h libev/ev_wrap.h",
118	},	314	},
119	INC => "-Ilibev",	315	INC => "-Ilibev",
120	DEFINE => "$DEFINE",	316	DEFINE => "$DEFINE",
121	NAME => "EV",	317	NAME => "EV",
122	LIBS => [$LIBS],	318	LIBS => [$LIBS],
		319	PREREQ_PM => {
		320	@anyevent,
		321	"common::sense" => 0,
		322	},
		323	CONFIGURE_REQUIRES => { "ExtUtils::MakeMaker" => 6.52, "Canary::Stability" => 0 },
123	VERSION_FROM => "EV.pm",	324	VERSION_FROM => "EV.pm",
124	PM => {	325	PM => {
125	'EV.pm' => '$(INST_LIBDIR)/EV.pm',	326	'EV.pm' => '$(INST_LIB)/EV.pm',
126	'EV/AnyEvent.pm' => '$(INST_LIBDIR)/EV/AnyEvent.pm',
127	'EV/DNS.pm' => '$(INST_LIBDIR)/EV/DNS.pm',
128	'EV/EVAPI.h' => '$(INST_LIBDIR)/EV/EVAPI.h',	327	'EV/EVAPI.h' => '$(INST_LIB)/EV/EVAPI.h',
129	'EV/MakeMaker.pm' => '$(INST_LIBDIR)/EV/MakeMaker.pm',	328	'EV/MakeMaker.pm' => '$(INST_LIB)/EV/MakeMaker.pm',
130	'libev/ev.h' => '$(INST_LIBDIR)/EV/ev.h',	329	'libev/ev.h' => '$(INST_LIB)/EV/ev.h',
		330	'libev/ev.pod' => '$(INST_LIB)/EV/libev.pod',
131	},	331	},
		332	MAN3PODS => {
		333	'EV.pm' => '$(INST_MAN3DIR)/EV.$(MAN3EXT)',
		334	'EV/MakeMaker.pm' => '$(INST_MAN3DIR)/EV::MakeMaker.$(MAN3EXT)',
		335	'libev/ev.pod' => '$(INST_MAN3DIR)/EV::libev.$(MAN3EXT)',
		336	},
132	);	337	);
133		338
134		339

Diff Legend

-–
+Removed lines
-+
+Added lines
-<
+Changed lines
->
+Changed lines

Comparing EV/Makefile.PL (file contents): Revision 1.13 by root, Thu Nov 1 17:45:30 2007 UTC vs. Revision 1.59 by root, Sat Jun 22 16:43:05 2019 UTC

Diff Legend

Comparing EV/Makefile.PL (file contents):
Revision 1.13 by root, Thu Nov 1 17:45:30 2007 UTC vs.
Revision 1.59 by root, Sat Jun 22 16:43:05 2019 UTC